Revert "Fix vagrant networking"

cluster/saltbase/salt/kubelet/init.sls

@@ -70,7 +70,4 @@ kubelet:
       - file: /etc/init.d/kubelet
 {% endif %}
       - file: /var/lib/kubelet/kubernetes_auth
-{% if grains.network_mode is defined and grains.network_mode == 'openvswitch' %}
-      - sls: sdn
-{% endif %}
 

cluster/saltbase/salt/top.sls

@@ -40,9 +40,6 @@ base:
     - kube-addons
 {% if grains['cloud'] is defined and grains['cloud'] == 'azure' %}
     - openvpn
-{% else %}
-    - docker
-    - sdn
 {% endif %}
 
   'roles:kubernetes-pool-vsphere':

cluster/vagrant/config-default.sh

@@ -29,15 +29,12 @@ export MASTER_NAME="${INSTANCE_PREFIX}-master"
 # Map out the IPs, names and container subnets of each minion
 export MINION_IP_BASE="10.245.1."
 MINION_CONTAINER_SUBNET_BASE="10.246"
-MASTER_CONTAINER_NETMASK="255.255.255.0"
-MASTER_CONTAINER_ADDR="${MINION_CONTAINER_SUBNET_BASE}.0.1"
-MASTER_CONTAINER_SUBNET="${MINION_CONTAINER_SUBNET_BASE}.0.1/24"
 CONTAINER_SUBNET="${MINION_CONTAINER_SUBNET_BASE}.0.0/16"
 for ((i=0; i < NUM_MINIONS; i++)) do
   MINION_IPS[$i]="${MINION_IP_BASE}$((i+3))"
   MINION_NAMES[$i]="${INSTANCE_PREFIX}-minion-$((i+1))"
-  MINION_CONTAINER_SUBNETS[$i]="${MINION_CONTAINER_SUBNET_BASE}.$((i+1)).1/24"
+  MINION_CONTAINER_SUBNETS[$i]="${MINION_CONTAINER_SUBNET_BASE}.${i}.1/24"
-  MINION_CONTAINER_ADDRS[$i]="${MINION_CONTAINER_SUBNET_BASE}.$((i+1)).1"
+  MINION_CONTAINER_ADDRS[$i]="${MINION_CONTAINER_SUBNET_BASE}.${i}.1"
   MINION_CONTAINER_NETMASKS[$i]="255.255.255.0"
   VAGRANT_MINION_NAMES[$i]="minion-$((i+1))"
 done

cluster/vagrant/provision-network.sh

@@ -16,8 +16,7 @@
 
 DOCKER_BRIDGE=kbr0
 OVS_SWITCH=obr0
-DOCKER_OVS_TUN=tun0
+GRE_TUNNEL_BASE=gre
-TUNNEL_BASE=gre
 NETWORK_CONF_PATH=/etc/sysconfig/network-scripts/
 POST_NETWORK_SCRIPT_DIR=/kubernetes-vagrant
 POST_NETWORK_SCRIPT=${POST_NETWORK_SCRIPT_DIR}/network_closure.sh
@@ -25,6 +24,55 @@ POST_NETWORK_SCRIPT=${POST_NETWORK_SCRIPT_DIR}/network_closure.sh
 # ensure location of POST_NETWORK_SCRIPT exists
 mkdir -p $POST_NETWORK_SCRIPT_DIR
 
+# add docker bridge ifcfg file
+cat <<EOF > ${NETWORK_CONF_PATH}ifcfg-${DOCKER_BRIDGE}
+# Generated by yours truly
+DEVICE=${DOCKER_BRIDGE}
+ONBOOT=yes
+TYPE=Bridge
+BOOTPROTO=static
+IPADDR=${MINION_CONTAINER_ADDR}
+NETMASK=${MINION_CONTAINER_NETMASK}
+STP=yes
+EOF
+
+# add the ovs bridge ifcfg file
+cat <<EOF > ${NETWORK_CONF_PATH}ifcfg-${OVS_SWITCH}
+DEVICE=${OVS_SWITCH}
+ONBOOT=yes
+DEVICETYPE=ovs
+TYPE=OVSBridge
+BOOTPROTO=static
+HOTPLUG=no
+BRIDGE=${DOCKER_BRIDGE}
+EOF
+
+# now loop through all other minions and create persistent gre tunnels
+GRE_NUM=0
+for remote_ip in "${MINION_IPS[@]}"
+do
+    if [ "${remote_ip}" == "${MINION_IP}" ]; then
+         continue
+    fi
+    ((GRE_NUM++)) || echo
+    GRE_TUNNEL=${GRE_TUNNEL_BASE}${GRE_NUM}
+    # ovs-vsctl add-port ${OVS_SWITCH} ${GRE_TUNNEL} -- set interface ${GRE_TUNNEL} type=gre options:remote_ip=${remote_ip}
+    cat <<EOF >  ${NETWORK_CONF_PATH}ifcfg-${GRE_TUNNEL}
+DEVICE=${GRE_TUNNEL}
+ONBOOT=yes
+DEVICETYPE=ovs
+TYPE=OVSTunnel
+OVS_BRIDGE=${OVS_SWITCH}
+OVS_TUNNEL_TYPE=gre
+OVS_TUNNEL_OPTIONS="options:remote_ip=${remote_ip}"
+EOF
+done
+
+# add ip route rules such that all pod traffic flows through docker bridge and consequently to the gre tunnels
+cat <<EOF > ${NETWORK_CONF_PATH}route-${DOCKER_BRIDGE}
+${CONTAINER_SUBNET} dev ${DOCKER_BRIDGE} scope link src ${MINION_CONTAINER_ADDR}
+EOF
+
 # generate the post-configure script to be called by salt as cmd.wait
 cat <<EOF > ${POST_NETWORK_SCRIPT}
 #!/bin/bash
@@ -33,58 +81,27 @@ set -e
 
 # Only do this operation once, otherwise, we get docker.service files output on disk, and the command line arguments get applied multiple times
 grep -q kbr0 /etc/sysconfig/docker || {
-  CONTAINER_SUBNETS=(${MASTER_CONTAINER_SUBNET} ${MINION_CONTAINER_SUBNETS[@]})
-  CONTAINER_IPS=(${MASTER_IP} ${MINION_IPS[@]})
-
   # Stop docker before making these updates
   systemctl stop docker
 
-  # create new docker bridge
+  # NAT interface fails to revive on network restart, so OR-gate to true
-  ip link set dev ${DOCKER_BRIDGE} down || true
+  systemctl restart network.service || true
-  brctl delbr ${DOCKER_BRIDGE} || true
+
-  brctl addbr ${DOCKER_BRIDGE}
+  # set docker bridge up, and set stp on the ovs bridge
   ip link set dev ${DOCKER_BRIDGE} up
-  ifconfig ${DOCKER_BRIDGE} ${CONTAINER_ADDR} netmask ${CONTAINER_NETMASK} up
+  ovs-vsctl set Bridge ${OVS_SWITCH} stp_enable=true
-
-  # add ovs bridge
-  ovs-vsctl del-br ${OVS_SWITCH} || true
-  ovs-vsctl add-br ${OVS_SWITCH} -- set Bridge ${OVS_SWITCH} fail-mode=secure
-  ovs-vsctl set bridge ${OVS_SWITCH} protocols=OpenFlow13
-  ovs-vsctl del-port ${OVS_SWITCH} ${TUNNEL_BASE}0 || true
-  ovs-vsctl add-port ${OVS_SWITCH} ${TUNNEL_BASE}0 -- set Interface ${TUNNEL_BASE}0 type=${TUNNEL_BASE} options:remote_ip="flow" options:key="flow" ofport_request=10
-
-  # add tun device
-  ovs-vsctl del-port ${OVS_SWITCH} ${DOCKER_OVS_TUN} || true
-  ovs-vsctl add-port ${OVS_SWITCH} ${DOCKER_OVS_TUN} -- set Interface ${DOCKER_OVS_TUN} type=internal ofport_request=9
-  brctl addif ${DOCKER_BRIDGE} ${DOCKER_OVS_TUN}
-  ip link set ${DOCKER_OVS_TUN} up
-
-
-  # add oflow rules, because we do not want to use stp
-  ovs-ofctl -O OpenFlow13 del-flows ${OVS_SWITCH}
-
-  # now loop through all other minions and create persistent gre tunnels
-  NODE_INDEX=0
-  for remote_ip in "\${CONTAINER_IPS[@]}"
-  do
-      if [ "\${remote_ip}" == "${NODE_IP}" ]; then
-           ovs-ofctl -O OpenFlow13 add-flow ${OVS_SWITCH} "table=0,ip,in_port=10,nw_dst=\${CONTAINER_SUBNETS[\${NODE_INDEX}]},actions=output:9"
-           ovs-ofctl -O OpenFlow13 add-flow ${OVS_SWITCH} "table=0,arp,in_port=10,nw_dst=\${CONTAINER_SUBNETS[\${NODE_INDEX}]},actions=output:9"
-      else
-           ovs-ofctl -O OpenFlow13 add-flow ${OVS_SWITCH} "table=0,in_port=9,ip,nw_dst=\${CONTAINER_SUBNETS[\${NODE_INDEX}]},actions=set_field:\${remote_ip}->tun_dst,output:10"
-           ovs-ofctl -O OpenFlow13 add-flow ${OVS_SWITCH} "table=0,in_port=9,arp,nw_dst=\${CONTAINER_SUBNETS[\${NODE_INDEX}]},actions=set_field:\${remote_ip}->tun_dst,output:10"
-      fi
-      ((NODE_INDEX++)) || true
-  done
-
-  # add ip route rules such that all pod traffic flows through docker bridge and consequently to the gre tunnels
-  ip route add ${CONTAINER_SUBNET} dev ${DOCKER_BRIDGE} scope link src ${CONTAINER_ADDR}
-
 
   # modify the docker service file such that it uses the kube docker bridge and not its own
-  echo "OPTIONS='-b=kbr0 --selinux-enabled ${DOCKER_OPTS}'" >/etc/sysconfig/docker
+  #echo "OPTIONS=-b=kbr0 --iptables=false --selinux-enabled" > /etc/sysconfig/docker
+  echo "OPTIONS='-b=kbr0 --iptables=false --selinux-enabled ${DOCKER_OPTS}'" >/etc/sysconfig/docker
   systemctl daemon-reload
-  systemctl start docker
+  systemctl restart docker.service
+
+  # setup iptables masquerade rules so the pods can reach the internet
+  iptables -t nat -A POSTROUTING -s ${CONTAINER_SUBNET} ! -d ${CONTAINER_SUBNET} -j MASQUERADE
+
+  # persist please
+  iptables-save >& /etc/sysconfig/iptables
 }
 EOF
 

cluster/vagrant/util.sh

@@ -69,13 +69,6 @@ function create-provision-scripts {
     echo "MASTER_IP='${MASTER_IP}'"
     echo "MINION_NAMES=(${MINION_NAMES[@]})"
     echo "MINION_IPS=(${MINION_IPS[@]})"
-    echo "NODE_IP='${MASTER_IP}'"
-    echo "CONTAINER_SUBNET='${CONTAINER_SUBNET}'"
-    echo "CONTAINER_NETMASK='${MASTER_CONTAINER_NETMASK}'"
-    echo "MASTER_CONTAINER_SUBNET='${MASTER_CONTAINER_SUBNET}'"
-    echo "CONTAINER_ADDR='${MASTER_CONTAINER_ADDR}'"
-    echo "MINION_CONTAINER_NETMASKS='${MINION_CONTAINER_NETMASKS[@]}'"
-    echo "MINION_CONTAINER_SUBNETS=(${MINION_CONTAINER_SUBNETS[@]})"
     echo "PORTAL_NET='${PORTAL_NET}'"
     echo "MASTER_USER='${MASTER_USER}'"
     echo "MASTER_PASSWD='${MASTER_PASSWD}'"
@@ -87,7 +80,6 @@ function create-provision-scripts {
     echo "DNS_DOMAIN='${DNS_DOMAIN:-}'"
     echo "RUNTIME_CONFIG='${RUNTIME_CONFIG:-}'"
     grep -v "^#" "${KUBE_ROOT}/cluster/vagrant/provision-master.sh"
-    grep -v "^#" "${KUBE_ROOT}/cluster/vagrant/provision-network.sh"
   ) > "${KUBE_TEMP}/master-start.sh"
 
   for (( i=0; i<${#MINION_NAMES[@]}; i++)); do
@@ -99,11 +91,8 @@ function create-provision-scripts {
       echo "MINION_IPS=(${MINION_IPS[@]})"
       echo "MINION_IP='${MINION_IPS[$i]}'"
       echo "MINION_ID='$i'"
-      echo "NODE_IP='${MINION_IPS[$i]}'"
+      echo "MINION_CONTAINER_ADDR='${MINION_CONTAINER_ADDRS[$i]}'"
-      echo "MASTER_CONTAINER_SUBNET='${MASTER_CONTAINER_SUBNET}'"
+      echo "MINION_CONTAINER_NETMASK='${MINION_CONTAINER_NETMASKS[$i]}'"
-      echo "CONTAINER_ADDR='${MINION_CONTAINER_ADDRS[$i]}'"
-      echo "CONTAINER_NETMASK='${MINION_CONTAINER_NETMASKS[$i]}'"
-      echo "MINION_CONTAINER_SUBNETS=(${MINION_CONTAINER_SUBNETS[@]})"
       echo "CONTAINER_SUBNET='${CONTAINER_SUBNET}'"
       echo "DOCKER_OPTS='${EXTRA_DOCKER_OPTS-}'"
       grep -v "^#" "${KUBE_ROOT}/cluster/vagrant/provision-minion.sh"
@@ -268,10 +257,6 @@ function find-vagrant-name-by-ip {
 # Find the vagrant machien name based on the host name of the minion
 function find-vagrant-name-by-minion-name {
   local ip="$1"
-  if [[ "$ip" == "${INSTANCE_PREFIX}-master" ]]; then
-    echo "master"
-    return $?
-  fi
   local ip_pattern="${INSTANCE_PREFIX}-minion-(.*)"
 
   [[ $ip =~ $ip_pattern ]] || {
@@ -295,7 +280,7 @@ function ssh-to-node {
     return 1
   }
 
-  vagrant ssh "${machine}" -c "${cmd}"
+  vagrant ssh "${machine}" -c "${cmd}" | grep -v "Connection to.*closed"
 }
 
 # Restart the kube-proxy on a node ($1)
@@ -303,11 +288,6 @@ function restart-kube-proxy {
   ssh-to-node "$1" "sudo systemctl restart kube-proxy"
 }
 
-# Restart the apiserver
-function restart-apiserver {
-  ssh-to-node "${master}" "sudo systemctl restart kube-apiserver"
-}
-
 function setup-monitoring-firewall {
   echo "TODO" 1>&2
 }

hack/e2e-suite/services.sh

@@ -33,6 +33,11 @@ source "${KUBE_VERSION_ROOT}/cluster/${KUBERNETES_PROVIDER}/util.sh"
 
 prepare-e2e
 
+if [[ "$KUBERNETES_PROVIDER" == "vagrant" ]]; then
+  echo "WARNING: Skipping services.sh for ${KUBERNETES_PROVIDER}.  See https://github.com/GoogleCloudPlatform/kubernetes/issues/3655"
+  exit 0
+fi
+
 function error() {
   echo "$@" >&2
   exit 1
@@ -261,7 +266,7 @@ function verify_from_container() {
           for i in $(seq -s' ' 1 $4); do
             ok=false
             for j in $(seq -s' ' 1 10); do
-              if wget -q -T 5 -O - http://$2:$3; then
+              if wget -q -T 1 -O - http://$2:$3; then
                 echo
                 ok=true
                 break
@@ -415,11 +420,7 @@ verify_from_container "${svc3_name}" "${svc3_ip}" "${svc3_port}" \
 #
 echo "Test 6: Restart the master, make sure portals come back."
 echo "Restarting the master"
-if [[ "$KUBERNETES_PROVIDER" == "vagrant" ]]; then
-    restart-apiserver "${master}"
-else
 ssh-to-node "${master}" "sudo /etc/init.d/kube-apiserver restart"
-fi
 sleep 5
 echo "Verifying the portals from the host"
 wait_for_service_up "${svc3_name}" "${svc3_ip}" "${svc3_port}" \