Automatic merge from submit-queue
clean api server cruft
Some cruft has developed over refactors. Remove that cruft.
@liggitt probably last in the chain so far
Automatic merge from submit-queue
remove [Conformance] flag on some e2es
Downstream distributions that absorb the upstream tests would like to give their customers a standard mechanism to validate their clusters, post setup. As of today [Conformance] works for most things, but there are a known set of tests that vary due to opinionated differences around networking, security, etc... and providing a complete skip list can be cumbersome. To address this, we've simply modified the flag on some tests to [Conformance:Variant]. All existing behavior should be maintained.
Fixes: #34105
Automatic merge from submit-queue
Kubelet: Use RepoDigest for ImageID when available
```release-note
Use manifest digest (as `docker-pullable://`) as ImageID when available (exposes a canonical, pullable image ID for containers).
```
Previously, we used the docker config digest (also called "image ID"
by Docker) for the value of the `ImageID` field in the container status.
This was not particularly useful, since the config manifest is not
what's used to identify the image in a registry, which uses the manifest
digest instead. Docker 1.12+ always populates the RepoDigests field
with the manifest digests, and Docker 1.10 and 1.11 populate it when
images are pulled by digest.
This commit changes `ImageID` to point to the the manifest digest when
available, using the prefix `docker-pullable://` (instead of
`docker://`)
Related to #32159
Automatic merge from submit-queue
Run flaky tests in parallel
We should try to emulate the main CI environment in the flaky test suite so that it is clear when a test can be moved out of the flaky suite. Since a common source of flakes is unintended interactions between tests running in parallel, we should run the flaky suite in parallel to better detect such flakes.
Previously, we used the docker config digest (also called "image ID"
by Docker) for the value of the `ImageID` field in the container status.
This was not particularly useful, since the config manifest is not
what's used to identify the image in a registry, which uses the manifest
digest instead. Docker 1.12+ always populates the RepoDigests field
with the manifest digests, and Docker 1.10 and 1.11 populate it when
images are pulled by digest.
This commit changes `ImageID` to point to the the manifest digest when
available, using the prefix `docker-pullable://` (instead of
`docker://`)
Automatic merge from submit-queue
refactor controller as posthook when configured and enabled
builds on https://github.com/kubernetes/kubernetes/pull/33785 .
Models the bootstrap controller as a PostHook which is added when its API group is available and its configured.
@liggitt Stefan is out for a while.
Automatic merge from submit-queue
Fix confusing log messages
While debugging https://github.com/kubernetes/kubernetes/issues/33876 , I noticed following confusing message:
```
The status of Pod kibana-logging-v1-j99la is Running, waiting for it to be either Running or Failed
```
Automatic merge from submit-queue
annotate some addtional errors in e2e tests
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
Adds some additional context to e2e test failures.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: some work toward #34059
**Special notes for your reviewer**: I didn't want to go through all of the offending cases so I picked off a few files and addressed those.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
Automatic merge from submit-queue
remove testapi.Default.GroupVersion
I'm going to try to take this as a series of mechanicals. This removes `testapi.Default.GroupVersion()` and replaces it with `registered.GroupOrDie(api.GroupName).GroupVersion`.
@caesarxuchao I'm trying to see how much of `pkg/api/testapi` I can remove.
Automatic merge from submit-queue
Update GCI_VERSION to gci-dev-55-8866-0-0
Update GCI base image:
Change log:
* Built-in kubernetes updated to v1.4.0
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools
* OpenSSL CVE fixes
```release-note
Update GCI base image:
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools (ebtools)
* OpenSSL CVE fixes
```
cc/ @kubernetes/goog-image cc/ @dchen1107
Automatic merge from submit-queue
try to use ifdown/ifup if available
Tried this on both ContainerVM and GCI image.
`ip link set eth0 down` is too destructive for containerVM. It could not recover with correct network setup hence failing the test. Need to use ifdown/ifup on containerVM.
reference:
http://serverfault.com/questions/603906/ip-link-set-not-assigning-ip-address-but-ifup-does
Automatic merge from submit-queue
Revert "Add kubelet awareness to taint tolerant match caculator."
Reverts kubernetes/kubernetes#26501
Original PR was not fully reviewed by @kubernetes/sig-node
cc/ @timothysc @resouer
Automatic merge from submit-queue
Kubelet: Use RepoDigest for ImageID when available
**Release note**:
```release-note
Use manifest digest (as `docker-pullable://`) as ImageID when available (exposes a canonical, pullable image ID for containers).
```
Previously, we used the docker config digest (also called "image ID"
by Docker) for the value of the `ImageID` field in the container status.
This was not particularly useful, since the config manifest is not
what's used to identify the image in a registry, which uses the manifest
digest instead. Docker 1.12+ always populates the RepoDigests field
with the manifest digests, and Docker 1.10 and 1.11 populate it when
images are pulled by digest.
This commit changes `ImageID` to point to the the manifest digest when
available, using the prefix `docker-pullable://` (instead of
`docker://`)
Related to #32159
Automatic merge from submit-queue
Add kubelet awareness to taint tolerant match caculator.
Add kubelet awareness to taint tolerant match caculator.
Ref: #25320
This is required by `TaintEffectNoScheduleNoAdmit` & `TaintEffectNoScheduleNoAdmitNoExecute `, so that node will know if it should expect the taint&tolerant
Automatic merge from submit-queue
Don't set timeouts in clients in tests
We are not setting timeouts in production - we shouldn't do it in tests then...
Addresses point 2. of #31345
Automatic merge from submit-queue
add delete-namespace-on-failure flag
I have been doing this for a while.
Setting `--delete-namespace=false --clean-start=true` only works if you have only one e2e test running in a loop.
This PR lets someone to set `delete-namespace-on-failure=false` and run multiple tests in parallel and preserve the crime scene. It makes it easier to reproduce failures.
Let me know if this is worth it or there are some other tricks I am not aware.
Automatic merge from submit-queue
Delete federation namespace after the test completes
The code was commented because of a bug in namespace deletion which is now fixed.
Note that this deletes the namespace in federation control plane. We still need to delete the namespace from each cluster (cascading deletion)
cc @kubernetes/sig-cluster-federation
Changelog:
* Built-in kubernetes updated to v1.4.0
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools
* OpenSSL CVE fixes
