Tim Hockin
ac3cc3c518
Rename PORTAL_NET all over
2015-05-28 16:10:44 -07:00
Dawn Chen
04c4d25065
Merge pull request #7905 from bakins/aws-coreos
...
AWS: use CoreOS for nodes
2015-05-21 09:05:56 -07:00
Daniel Smith
ce4b54ec70
Merge pull request #8209 from krousey/v1beta1_cluster
...
Removing some v1beta1 uses in cluster/
2015-05-15 14:56:41 -07:00
Kris Rousey
98c457c397
Updating /cluster to use v1beta 3 specs, and change a lot of polling to
...
healthz instead of api endpoints.
2015-05-15 14:17:55 -07:00
Robert Bailey
9d6c032929
Merge pull request #7888 from madis/associate_aws_elastic_ip_with_master
...
Associate master instance with AWS Elastic IP
2015-05-14 13:18:19 -07:00
Madis Nõmme
15643a2c72
Add 'auto' option for MASTER_RESERVED_IP. No ElasticIP allocation by default.
...
Default behaviour when setting up a cluster is using the Amazon-assigned public ip.
It will change between reboots. If MASTER_RESERVED_IP is set to 'auto', new Elastic
IP will be allocated & assigned to master. If MASTER_RESERVED_IP is set to an existing
Elastic IP, it will be used. When something fails, original Amazon-given IP will be used.
2015-05-14 08:33:07 +03:00
Brian Akins
fac4350fa6
Initial addition of CoreOS as minion for AWS cluster
2015-05-13 16:39:22 -04:00
Madis Nõmme
eb220f05a6
Properly get return value (considering errexit). Quote variables.
2015-05-13 10:45:51 +03:00
Madis Nõmme
d4d02a9028
Optionally associate master instance with AWS Elastic IP
...
When MASTER_RESERVED_IP is set to elastic IP from AWS, then aws/util.sh will
associate it with master instance and assign it to KUBE_MASTER_IP. If no MASTER_RESERVED_IP
is set, new elastic ip will be requested from amazon. This allows cluster certificates to
be generated for an IP that doesn't change between stopping & starting cluster instances.
The requested elastic ip is not released when kube-down.sh is run. I think it is good
because user could have created DNS records and it would be bad if the IP was removed.
He can reuse it next time through MASTER_RESERVED_IP when setting up cluster again.
2015-05-13 10:45:51 +03:00
Justin Santa Barbara
ffb0e7f9b8
Install specific salt version on AWS, based on GCE
...
The latest salt version breaks the container_bridge.py _state function
We can lock to the same version as GCE. This is not a full fix,
because we can't update to the latest salt without breaking GCE,
but this at least unbreaks and sync AWS with GCE.
This isn't a straight copy from GCE, because we still use
the salt master on AWS (for now)
Fixes #8114
2015-05-12 16:33:56 -04:00
Manfred Geiler
c5c62f7d57
fixed second missing $ and added curly brackets
2015-05-08 17:18:52 +02:00
Manfred Geiler
1119340260
fixed missing $
2015-05-08 16:58:49 +02:00
Manfred Geiler
205ed2bf6e
AWS: make it possible to disable minion public ip association
2015-05-08 00:09:47 +02:00
Justin Santa Barbara
57f7b658bb
AWS: Change apiserver to listen on 443 directly, not through nginx
...
Mirrors changes in GCE. I think the same changes will be needed for vagrant.
2015-05-02 16:59:04 -04:00
Eric Paris
6b3a6e6b98
Make copyright ownership statement generic
...
Instead of saying "Google Inc." (which is not always correct) say "The
Kubernetes Authors", which is generic.
2015-05-01 17:49:56 -04:00
Brendan Burns
637cd57a25
Merge pull request #6606 from gust1n/aws-existing-vpc
...
AWS: Improving getting existing VPC and subnet
2015-04-27 11:11:25 -07:00
Joakim Gustin
645d6d1f26
Use existing subnet when launching AWS cluster in existing VPC
2015-04-23 11:01:17 +02:00
Justin Santa Barbara
9253ae6dca
AWS: Fix some bash style problems: variable quoting & locals
2015-04-22 18:30:09 -07:00
Justin Santa Barbara
45b658ea7c
AWS: don't try to create undefined config_dir
2015-04-20 19:14:16 -07:00
Jeff Lowdermilk
3787fc5eca
set KUBECONFIG in common.sh, default to new location
...
and preserve value in ginkgo e2e test driver
2015-04-20 11:07:35 -07:00
Jeff Lowdermilk
4f6dc99075
Generate kubeconfig for all providers in cluster/ that use auth
2015-04-20 11:07:35 -07:00
Justin Santa Barbara
034412aff1
Support multiple k8s clusters
2015-04-10 13:25:43 -07:00
deads2k
609208b8b5
update scripts with correct templates
2015-04-07 08:07:24 -04:00
Justin Santa Barbara
2fb573c482
Create instances in the specified AZ
2015-04-03 08:04:53 -07:00
Zach Loafman
fc8ba8d77b
Merge pull request #6011 from justinsb/aws_specify_zone
...
Fix AWS region vs zone
2015-03-31 12:26:05 -07:00
Justin Santa Barbara
edbebd653c
Fix S3 location handling for US classic
2015-03-31 05:42:10 -07:00
Justin Santa Barbara
194143e61b
Use the correct region for the S3 bucket
...
We may not have created the bucket!
2015-03-27 12:58:47 -07:00
Justin Santa Barbara
7179f5f004
Change AWS_ZONE to ZONE, for compatibility with e2e tests
2015-03-27 08:53:45 -07:00
Justin Santa Barbara
583892da2d
Fix AWS region vs zone
...
We were specifying a region, but naming it as a zone in util.sh
The zone matters just as much as the region, e.g. for EBS volumes.
We also change the config to require a Zone, not a Region.
But we fallback to get the information from the metadata service.
2015-03-26 15:11:05 -07:00
Zach Loafman
e5914915b8
Merge pull request #6003 from justinsb/aws_wait_for_instance
...
Wait for master to be started on AWS
2015-03-26 14:06:25 -07:00
Justin Santa Barbara
f256d3b77a
Wait for ELBs to be deleted
2015-03-26 13:50:35 -07:00
Justin Santa Barbara
53bdbec64e
Launch minions in parallel
2015-03-26 10:58:18 -07:00
Justin Santa Barbara
9556318c58
Wait for master instance running before adding route
2015-03-26 10:23:25 -07:00
Saad Ali
f3ebe30605
Merge pull request #5940 from justinsb/fix_bash_style
...
Fix bash style issues in AWS script
2015-03-25 14:40:42 -07:00
Justin Santa Barbara
06704bb94f
Security group should be scoped to our vpc
...
Note that security group names only need to be unique with a VPC as well,
which is handy here.
2015-03-25 12:53:12 -07:00
Justin Santa Barbara
ac12665f48
Quote AWS_SSH_KEY
2015-03-25 12:41:02 -07:00
Justin Santa Barbara
80ba56a371
Fix variable dollar-char errors
2015-03-25 12:36:52 -07:00
Justin Santa Barbara
505488269c
Use double-square brackets in if tests
2015-03-25 12:36:20 -07:00
Alex Robinson
c22d4c6b3f
Merge pull request #5916 from justinsb/aws_cleanup_loadbalancers
...
Remove load balancers as part of kube-down.sh
2015-03-25 10:32:14 -07:00
Justin Santa Barbara
68935e0798
Remove load balancers as part of kube-down.sh
2015-03-25 05:36:47 -07:00
Brendan Burns
cf72cf098a
Disable validation on AWS where it doesn't work.
...
Also add an advanced route for the master which I forgot previously.
2015-03-24 21:08:04 -07:00
Brendan Burns
8bac135f85
Configure docker and kubelet on AWS master.
2015-03-24 17:19:06 -07:00
Robert Bailey
b152d8e884
Merge pull request #5822 from justinsb/aws_idempotent_kube_down
...
More idempotent kube-down for AWS, and delete multiple security groups
2015-03-24 07:58:03 -07:00
Saad Ali
b01f1f9baf
Merge pull request #5683 from justinsb/aws_ephemeral_disks
...
Format ephemeral disks with btrfs, put Docker storage on there
2015-03-24 07:36:01 -07:00
Justin Santa Barbara
2a042fc423
More idempotent kube-down for AWS, and delete multiple security groups
...
There may be multiple security groups if we were using ELB, and
we have to delete them all apart from the default one, which EC2
prevents us from deleting.
Also use the same looping logic to clean up from partial up/downs.
2015-03-23 13:00:34 -07:00
Zach Loafman
407d1fec45
Both @satnam6502 and E2E tests confirm: This code is no longer needed
...
Deletion is wonderful. The only weird thing was where to put the
message about the proxy URLs. Satnam suggested kubectl clusterinfo,
which seemed like a good option to put at the end of cluster turn-up.
2015-03-19 22:23:11 -07:00
Justin Santa Barbara
6fec242f89
Format ephemeral disks with btrfs, put Docker storage on there
...
Docker's default storage has severe bugs with older (stable) kernels.
Use btrfs to bypass those issues.
2015-03-19 19:23:29 -04:00
Alex Robinson
2537665ecc
Merge pull request #5381 from justinsb/aws_s3_in_us_east
...
Create S3 bucket in known region (default to us-east-1)
2015-03-18 09:34:59 -07:00
Justin Santa Barbara
8b535ff17a
Fix copy-and-paste error in log message
2015-03-16 14:30:24 -07:00
Justin Santa Barbara
9361b76977
Configure separate IAM roles for master & minion, create roles automatically
2015-03-16 10:37:25 -07:00
