Add ResetClusterStatusForNode() that clears a certain
control-plane node's APIEndpoint from the ClusterStatus
key in the kubeadm ConfigMap on "kubeadm reset".
Currently kubeadm supports a couple of configuration versions - v1alpha3 and
v1beta1. The former is deprecated, but still supported.
To discourage users from using it and to speedup conversion to newer versions,
we disable the loading of deprecated configurations by all kubeadm
sub-commands, but "kubeadm config migrate".
v1alpha3 is still present and supported at source level, but cannot be used
directly with kubeadm and some of its internal APIs.
The added benefit to this is, that users won't need to lookup for an old
kubeadm binary after upgrade, just because they were stuck with a deprecated
config version for too long.
To achieve this, the following was done:
- ValidateSupportedVersion now has an allowDeprecated boolean parameter, that
controls if the function should return an error upon detecting deprecated
config version. Currently the only deprecated version is v1alpha3.
- ValidateSupportedVersion is made package private, because it's not used
outside of the package anyway.
- BytesToInitConfiguration and LoadJoinConfigurationFromFile are modified to
disallow loading of deprecated kubeadm config versions. An error message,
that points users to kubeadm config migrate is returned.
- MigrateOldConfig is still allowed to load deprecated kubeadm config versions.
- A bunch of tests were fixed to not expect success if v1alpha3 config is
supplied.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
MigrateOldConfigFromFile is a function, whose purpose is to migrate one config
into another. It is working OK for now, but it has some issues:
- It is incredibly inefficient. It can reload and re-parse a single config file
for up to 3 times.
- Because of the reloads, it has to take a file containing the configuration
(not a byte slice as most of the rest config functions). However, it returns
the migrated config in a byte slice (rather asymmetric from the input
method).
- Due to the above points it's difficult to implement a proper interface for
deprecated kubeadm config versions.
To fix the issues of MigrateOldConfigFromFile, the following is done:
- Re-implement the function by removing the calls to file loading package
public APIs and replacing them with newly extracted package private APIs that
do the job with pre-provided input data in the form of
map[GroupVersionKind][]byte.
- Take a byte slice of the input configuration as an argument. This makes the
function input symmetric to its output. Also, it's now renamed to
MigrateOldConfig to represent the change from config file path as an input
to byte slice.
- As a bonus (actually forgotten from a previous change) BytesToInternalConfig
is renamed to the more descriptive BytesToInitConfiguration.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Add test files that exclude the field in question
under KubeletConfiguration -> evictionHard for non-Linux.
Add runtime abstraction for the test files in initconfiguration_tests.go
Currently ConfigFileAndDefaultsToInternalConfig and
FetchConfigFromFileOrCluster are used to default and load InitConfiguration
from file or cluster. These two APIs do a couple of completely separate things
depending on how they were invoked. In the case of
ConfigFileAndDefaultsToInternalConfig, an InitConfiguration could be either
defaulted with external override parameters, or loaded from file.
With FetchConfigFromFileOrCluster an InitConfiguration is either loaded from
file or from the config map in the cluster.
The two share both some functionality, but not enough code. They are also quite
difficult to use and sometimes even error prone.
To solve the issues, the following steps were taken:
- Introduce DefaultedInitConfiguration which returns defaulted version agnostic
InitConfiguration. The function takes InitConfiguration for overriding the
defaults.
- Introduce LoadInitConfigurationFromFile, which loads, converts, validates and
defaults an InitConfiguration from file.
- Introduce FetchInitConfigurationFromCluster that fetches InitConfiguration
from the config map.
- Reduce, when possible, the usage of ConfigFileAndDefaultsToInternalConfig by
replacing it with DefaultedInitConfiguration or LoadInitConfigurationFromFile
invocations.
- Replace all usages of FetchConfigFromFileOrCluster with calls to
LoadInitConfigurationFromFile or FetchInitConfigurationFromCluster.
- Delete FetchConfigFromFileOrCluster as it's no longer used.
- Rename ConfigFileAndDefaultsToInternalConfig to
LoadOrDefaultInitConfiguration in order to better describe what the function
is actually doing.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Currently JoinConfigFileAndDefaultsToInternalConfig is doing a couple of
different things depending on its parameters. It:
- loads a versioned JoinConfiguration from an YAML file.
- returns defaulted JoinConfiguration allowing for some overrides.
In order to make code more manageable, the following steps are taken:
- Introduce LoadJoinConfigurationFromFile, which loads a versioned
JoinConfiguration from an YAML file, defaults it (both dynamically and
statically), converts it to internal JoinConfiguration and validates it.
- Introduce DefaultedJoinConfiguration, which returns defaulted (both
dynamically and statically) and verified internal JoinConfiguration.
The possibility of overwriting defaults via versioned JoinConfiguration is
retained.
- Re-implement JoinConfigFileAndDefaultsToInternalConfig to use
LoadJoinConfigurationFromFile and DefaultedJoinConfiguration.
- Replace some calls to JoinConfigFileAndDefaultsToInternalConfig with calls to
either LoadJoinConfigurationFromFile or DefaultedJoinConfiguration where
appropriate.
- Rename JoinConfigFileAndDefaultsToInternalConfig to the more appropriate name
LoadOrDefaultJoinConfiguration.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
DetectUnsupportedVersion is somewhat uncomfortable, complex and inefficient
function to use. It takes an entire YAML document as bytes, splits it up to
byte slices of the different YAML sub-documents and group-version-kinds and
searches through those to detect an unsupported kubeadm config. If such config
is detected, the function returns an error, if it is not (i.e. the normal
function operation) everything done so far is discarded.
This could have been acceptable, if not the fact, that in all cases that this
function is called, the YAML document bytes are split up and an iteration on
GVK map is performed yet again. Hence, we don't need DetectUnsupportedVersion
in its current form as it's inefficient, complex and takes only YAML document
bytes.
This change replaces DetectUnsupportedVersion with ValidateSupportedVersion,
which takes a GroupVersion argument and checks if it is on the list of
unsupported config versions. In that case an error is returned.
ValidateSupportedVersion relies on the caller to read and split the YAML
document and then iterate on its GVK map checking if the particular
GroupVersion is supported or not.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
In order to allow for a smoother UX with CRIs different than Docker, we have to
make the --cri-socket command line flag optional when just one CRI is
installed.
This change does that by doing the following:
- Introduce a new runtime function (DetectCRISocket) that will attempt to
detect a CRI socket, or return an appropriate error.
- Default to using the above function if --cri-socket is not specified and
CRISocket in NodeRegistrationOptions is empty.
- Stop static defaulting to DefaultCRISocket. And rename it to
DefaultDockerCRISocket. Its use is now narrowed to "Docker or not"
distinguishment and tests.
- Introduce AddCRISocketFlag function that adds --cri-socket flag to a flagSet.
Use that in all commands, that support --cri-socket.
- Remove the deprecated --cri-socket-path flag from kubeadm config images pull
and deprecate --cri-socket in kubeadm upgrade apply.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
This is a minor cleanup which helps to make the code of kubeadm a bit
less error-prone by reducing the scope of local variables and
unexporting functions that are not meant to be used outside of their
respective modules.
When golint is run against kubeadm it reports severel warnings like
redundant if ...; err != nil check, just return error instead.
Fix the warnings by just returning error.
Replaced hardcoded "v0.12.0" strings with MinimumControlPlaneVersion and
MinimumKubeletVersion global variables.
This should help with a regular release version bumps.
kubeadm config migrate uses AnyConfigFileAndDefaultsToInternal, which can
unmarshal config from file only if InitConfiguration or JoinConfiguration are
present. Even with that in mind, it can only return a singlie config object,
with InitConfiguration taking precendence over JoinConfiguration. Thus, the
following cases were not handled properly, while they were perfectly valid for
kubeadm init/join:
- ClusterConfiguration only file caused kubeadm config migrate to exit with
error.
- Init + Join configurations in the same file caused Init + Cluster
configuration to be produced (ignoring JoinConfiguration). The same is valid
when the combo is Init + Cluster + Join configurations.
- Cluster + Join configuration ignores ClusterConfiguration and only
JoinConfiguration gets migrated.
To fix this, the following is done:
- Introduce MigrateOldConfigFromFile which migrates old config from a file,
while ensuring that all kubeadm originated input config kinds are taken care
of. Add comprehensive unit tests for this.
- Replace the use of AnyConfigFileAndDefaultsToInternal in
kubeadm config migrate with MigrateOldConfigFromFile.
- Remove the no longer used and error prone AnyConfigFileAndDefaultsToInternal.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Bump MinimumControlPlaneVersion and MinimumKubeletVersion to v1.12 and update
any related tests.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
ChooseAPIServerBindAddress is silently overriding the requested bind IP
address for the API server if that address is deemed unsuitable. This is
currently done only if the IP is a loopback one (127.0.0.0/8; ::1/128).
It's best to at least issue a warning if such override occurs, so that there
are no surprised users by this.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
The kubelet allows you to set `--pod-infra-container-image`
(also called `PodSandboxImage` in the kubelet config),
which can be a custom location to the "pause" image in the case
of Docker. Other CRIs are not supported.
Set the CLI flag for the Docker case in flags.go using
WriteKubeletDynamicEnvFile().
- Move from the old github.com/golang/glog to k8s.io/klog
- klog as explicit InitFlags() so we add them as necessary
- we update the other repositories that we vendor that made a similar
change from glog to klog
* github.com/kubernetes/repo-infra
* k8s.io/gengo/
* k8s.io/kube-openapi/
* github.com/google/cadvisor
- Entirely remove all references to glog
- Fix some tests by explicit InitFlags in their init() methods
Change-Id: I92db545ff36fcec83afe98f550c9e630098b3135
Up until now UnifiedControlPlaneImage existed as a string value as part of the
ClusterConfiguration. This provided an override for the Kubernetes core
component images with a single custom image. It is mostly used to override the
control plane images with the hyperkube image. This saves both bandwith and
disk space on the control plane nodes.
Unfortunately, this specified an entire image string (complete with its prefix,
image name and tag). This disables upgrades of setups that use hyperkube.
Therefore, to enable upgrades on hyperkube setups and to make configuration
more convenient, the UnifiedControlPlaneImage option is replaced with a boolean
option, called UseHyperKubeImage. If set to true, this option replaces the
image name of any Kubernetes core components with hyperkube, thus allowing for
upgrades and respecting the image repository and version, specified in the
ClusterConfiguration.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
When node lease feature is enabled, kubelet reports node status to api server
only if there is some change or it didn't report over last report interval.
Until now the control plane timeout was fixed to 4 minutes and users did not
have the ability to change it. This commit allows that timeout to be configured
via the new `timeoutForControlPlane` option in the API server config (itself a
member of the ClusterConfiguration).
The default timeout is still 4 minutes.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Writable was added to HostPathMount in v1alpha1 in order to control if an extra
volume is mounted in read only or writable mode.
Usually, in Kubernetes, this option is referred to as ReadOnly, instead of
Writable and is defaulted to `false`. However, at the time, all extra volumes
to pods were defaulted to read-only. Therefore, to avoid changes to existing
v1alpha1 configs, this option had to be added with reversed meaning.
Hence, it's called `writable`.
Now, with the migration towards v1beta1, we can safely change this to ReadOnly
and get it in sync with the reset of Kubernetes.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
