kubernetes/pkg/kubectl/cmd/completion.go

/*
Copyright 2014 The Kubernetes Authors.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/

package cmd

import (
	"bytes"
	"io"

	"github.com/spf13/cobra"

	"k8s.io/kubernetes/pkg/kubectl/cmd/templates"
	cmdutil "k8s.io/kubernetes/pkg/kubectl/cmd/util"
)

var (
	completion_long = templates.LongDesc(`
		Output shell completion code for the given shell (bash or zsh).

		This command prints shell code which must be evaluation to provide interactive
		completion of kubectl commands.

		    $ source <(kubectl completion bash)

		will load the kubectl completion code for bash. Note that this depends on the
		bash-completion framework. It must be sourced before sourcing the kubectl
		completion, e.g. on the Mac:

		    $ brew install bash-completion
		    $ source $(brew --prefix)/etc/bash_completion
		    $ source <(kubectl completion bash)

		If you use zsh[1], the following will load kubectl zsh completion:

		    $ source <(kubectl completion zsh)

		[1] zsh completions are only supported in versions of zsh >= 5.2`)
)

var (
	completion_shells = map[string]func(out io.Writer, cmd *cobra.Command) error{
		"bash": runCompletionBash,
		"zsh":  runCompletionZsh,
	}
)

func NewCmdCompletion(f cmdutil.Factory, out io.Writer) *cobra.Command {
	shells := []string{}
	for s := range completion_shells {
		shells = append(shells, s)
	}

	cmd := &cobra.Command{
		Use:   "completion SHELL",
		Short: "Output shell completion code for the given shell (bash or zsh)",
		Long:  completion_long,
		Run: func(cmd *cobra.Command, args []string) {
			err := RunCompletion(f, out, cmd, args)
			cmdutil.CheckErr(err)
		},
		ValidArgs: shells,
	}

	return cmd
}

func RunCompletion(f cmdutil.Factory, out io.Writer, cmd *cobra.Command, args []string) error {
	if len(args) == 0 {
		return cmdutil.UsageError(cmd, "Shell not specified.")
	}
	if len(args) > 1 {
		return cmdutil.UsageError(cmd, "Too many arguments. Expected only the shell type.")
	}
	run, found := completion_shells[args[0]]
	if !found {
		return cmdutil.UsageError(cmd, "Unsupported shell type %q.", args[0])
	}

	return run(out, cmd.Parent())
}

func runCompletionBash(out io.Writer, kubectl *cobra.Command) error {
	return kubectl.GenBashCompletion(out)
}

func runCompletionZsh(out io.Writer, kubectl *cobra.Command) error {
	zsh_initialilzation := `# Copyright 2016 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

__kubectl_bash_source() {
	alias shopt=':'
	alias _expand=_bash_expand
	alias _complete=_bash_comp
	emulate -L sh
	setopt kshglob noshglob braceexpand

	source "$@"
}

__kubectl_type() {
	# -t is not supported by zsh
	if [ "$1" == "-t" ]; then
		shift

		# fake Bash 4 to disable "complete -o nospace". Instead
		# "compopt +-o nospace" is used in the code to toggle trailing
		# spaces. We don't support that, but leave trailing spaces on
		# all the time
		if [ "$1" = "__kubectl_compopt" ]; then
			echo builtin
			return 0
		fi
	fi
	type "$@"
}

__kubectl_compgen() {
	local completions w
	completions=( $(compgen "$@") ) || return $?

	# filter by given word as prefix
	while [[ "$1" = -* && "$1" != -- ]]; do
		shift
		shift
	done
	if [[ "$1" == -- ]]; then
		shift
	fi
	for w in "${completions[@]}"; do
		if [[ "${w}" = "$1"* ]]; then
			echo "${w}"
		fi
	done
}

__kubectl_compopt() {
	true # don't do anything. Not supported by bashcompinit in zsh
}

__kubectl_declare() {
	if [ "$1" == "-F" ]; then
		whence -w "$@"
	else
		builtin declare "$@"
	fi
}

__kubectl_ltrim_colon_completions()
{
	if [[ "$1" == *:* && "$COMP_WORDBREAKS" == *:* ]]; then
		# Remove colon-word prefix from COMPREPLY items
		local colon_word=${1%${1##*:}}
		local i=${#COMPREPLY[*]}
		while [[ $((--i)) -ge 0 ]]; do
			COMPREPLY[$i]=${COMPREPLY[$i]#"$colon_word"}
		done
	fi
}

__kubectl_get_comp_words_by_ref() {
	cur="${COMP_WORDS[COMP_CWORD]}"
	prev="${COMP_WORDS[${COMP_CWORD}-1]}"
	words=("${COMP_WORDS[@]}")
	cword=("${COMP_CWORD[@]}")
}

__kubectl_filedir() {
	local RET OLD_IFS w qw

	__debug "_filedir $@ cur=$cur"
	if [[ "$1" = \~* ]]; then
		# somehow does not work. Maybe, zsh does not call this at all
		eval echo "$1"
		return 0
	fi

	OLD_IFS="$IFS"
	IFS=$'\n'
	if [ "$1" = "-d" ]; then
		shift
		RET=( $(compgen -d) )
	else
		RET=( $(compgen -f) )
	fi
	IFS="$OLD_IFS"

	IFS="," __debug "RET=${RET[@]} len=${#RET[@]}"

	for w in ${RET[@]}; do
		if [[ ! "${w}" = "${cur}"* ]]; then
			continue
		fi
		if eval "[[ \"\${w}\" = *.$1 || -d \"\${w}\" ]]"; then
			qw="$(__kubectl_quote "${w}")"
			if [ -d "${w}" ]; then
				COMPREPLY+=("${qw}/")
			else
				COMPREPLY+=("${qw}")
			fi
		fi
	done
}

__kubectl_quote() {
    if [[ $1 == \'* || $1 == \"* ]]; then
        # Leave out first character
        printf %q "${1:1}"
    else
    	printf %q "$1"
    fi
}

autoload -U +X bashcompinit && bashcompinit

# use word boundary patterns for BSD or GNU sed
LWORD='[[:<:]]'
RWORD='[[:>:]]'
if sed --help 2>&1 | grep -q GNU; then
	LWORD='\<'
	RWORD='\>'
fi

__kubectl_convert_bash_to_zsh() {
	sed \
	-e 's/declare -F/whence -w/' \
	-e 's/local \([a-zA-Z0-9_]*\)=/local \1; \1=/' \
	-e 's/flags+=("\(--.*\)=")/flags+=("\1"); two_word_flags+=("\1")/' \
	-e 's/must_have_one_flag+=("\(--.*\)=")/must_have_one_flag+=("\1")/' \
	-e "s/${LWORD}_filedir${RWORD}/__kubectl_filedir/g" \
	-e "s/${LWORD}_get_comp_words_by_ref${RWORD}/__kubectl_get_comp_words_by_ref/g" \
	-e "s/${LWORD}__ltrim_colon_completions${RWORD}/__kubectl_ltrim_colon_completions/g" \
	-e "s/${LWORD}compgen${RWORD}/__kubectl_compgen/g" \
	-e "s/${LWORD}compopt${RWORD}/__kubectl_compopt/g" \
	-e "s/${LWORD}declare${RWORD}/__kubectl_declare/g" \
	-e "s/\\\$(type${RWORD}/\$(__kubectl_type/g" \
	<<'BASH_COMPLETION_EOF'
`
	out.Write([]byte(zsh_initialilzation))

	buf := new(bytes.Buffer)
	kubectl.GenBashCompletion(buf)
	out.Write(buf.Bytes())

	zsh_tail := `
BASH_COMPLETION_EOF
}

__kubectl_bash_source <(__kubectl_convert_bash_to_zsh)
`
	out.Write([]byte(zsh_tail))
	return nil
}