ols-849-reviewcomments-made

ols-821-mclag-schema-correcttion-draft Changes

schema/switch.yml

@@ -45,6 +45,56 @@ properties:
           enum:
           - upstream
           - downstream
+      bridge-prio:
+        description: Bridge priority for root election. Ranging from 0–61440 (in steps of 4096)
+        type: integer
+        default: 32768
+      forward-delay-secs:
+        description: Time in seconds a port stays in Listening and Learning states
+          before transitioning to Forwarding.
+        type: integer
+      hello-time-secs:
+        description: Determines how often switches send BPDU.
+        type: integer
+      max-age-secs:
+        description: Maximum time (in seconds) before a BPDU is considered invalid.
+        type: integer
+      pathcost-method:
+        description: Specifies the method used for path cost calculation.
+          - short, 16-bit values (0–65535), IEEE 802.1D
+          - long, 32-bit values (0–200,000,000), IEEE 802.1w
+        type: string
+        enum:
+        - short
+        - long
+      bpdu-flooding:
+        description: Configures how BPDUs are flooded to spanning-tree disabled ports.
+          - to-all, Flood to all STP-disabled ports
+          - to-vlan, Flood to STP-disabled ports within the same VLAN
+        type: string
+        enum:
+        - to-all
+        - to-vlan
+      bpdu-tx-limit:
+        description: Maximum number of BPDU transmissions allowed per Hello interval.
+        type: integer
+      root-guard:
+        description: Enable Root Guard globally to prevent designated ports from becoming root.
+        type: boolean
+      mst-region:
+        description: MSTP region-wide configuration. Applicable when protocol is mstp.
+        type: object
+        properties:
+          name:
+            description: Name of multiple spanning tree region.
+            type: string
+            maxLength: 32
+            minLength: 1
+          revision:
+            description: MST region revision number.
+            type: integer
+            maximum: 65535
+            minimum: 0
       instances:
         description:
           Define a list of configuration for each STP instance.
@@ -55,40 +105,43 @@ properties:
           type: object
           properties:
             id:
-              description:
+              description: Indicates instance to configure.
-                Indicates instance to configure.
                 Depends on current STP protocol
                 If RPVSTP/PVSTP - vlan id
                 If MSTP - instance id
               type: integer
             enabled:
-              description:
+              description: Enable STP on this instance.
-                Enable STP on this instance.
               type: boolean
               default: true
             priority:
-              description:
+              description: MST priority.
-                Bridge priority.
               type: integer
               default: 32768
-            forward_delay:
+            forward-delay:
-              description:
+              description: Defines the amount of time a switch port stays in the Listening
-                Defines the amount of time a switch port stays in the Listening
                 and Learning states before transitioning to the Forwarding state.
               type: integer
               default: 15
-            hello_time:
+            hello-time:
-              description:
+              description: Determines how often switches send BPDU.
-                Determines how often switches send BPDU.
               type: integer
               default: 2
-            max_age:
+            max-age:
-              description:
+              description: Specifies the maximum time that a switch port should wait to
-                Specifies the maximum time that a switch port should wait to
                 receive a BPDU from its neighbor before 
                 considering the link as failed or disconnected.
               type: integer
               default: 20
+            path-cost:
+              description: Path cost for this MST instance.
+              type: integer
+            vlan-start:
+              description: VLAN starting range assigned to this MST instance.
+              type: integer
+            vlan-end:
+              description: VLAN ending range assigned to this MST instance.
+              type: integer
   ieee8021x:
     description:
       This section describes the global 802.1X (port access control) configuration.
@@ -439,20 +492,28 @@ properties:
               description: Configures the peer-link, which could be a physical port or a trunk group that connects the two MC-LAG peer switches.
               type: object
               properties:
-                type:
+                link-type:
                   description: Defines the type of peer-link, either 'port' or 'trunk-group'
                   type: string
                   enum:
                     - port
                     - trunk-group
                   default: trunk-group
-                value:
+                port-id:
-                  description: Specifies the port or trunk-group ID for the peer-link.
+                  description: Specifies the physical port name used as peer-link (only valid if type = port).
+                  type: string
+                  examples:
+                    - "Ethernet1"
+                    - "Ethernet2"
+                trunk-id:
+                  description: Specifies the trunk group ID used as peer-link (only valid if type = trunk-group).
                   type: integer
                   minimum: 1
                   maximum: 64
             mclag-group:
-              description: Configures the MC-LAG group, which binds the interfaces into a multi-chassis LAG.
+              description: Configures the MC-LAG group(s), which binds the interfaces into a multi-chassis LAG.
+              type: array
+              items:
                 type: object
                 properties:
                   group-id:
@@ -467,8 +528,8 @@ properties:
                       type: string
                       description: Interface names that are part of the MC-LAG group.
                       examples:
-                      - eth0
+                        - Ethernet0
-                      - eth1
+                        - Ethernet1
                   lacp-config:
                     description: LACP configuration settings for the MC-LAG group.
                     type: object

state/lldp-peers.yml

@@ -49,6 +49,10 @@ items:
           type: string
           description: Provides a textual description of the remote port, typically describing the interface or its purpose.
           example: "Ethernet Port on unit 1, port 2"
+        lldp-remote-sys-name:
+          type: string
+          description: Provides a textual description of the system name string (as defined by the sending device)
+          example: "Datacenter Switch-1"
         lldp-remote-port-max-mtu:
           type: string
           description: Displays the maximum transmission unit (MTU) size that the remote port supports, indicating the largest packet size the port can handle.
@@ -117,6 +121,19 @@ items:
               type: string
               description: Displays the PoE class of the remote device, indicating its power consumption classification.
               enum: ["Class-1", "Class-2", "Class-3", "Class-4","Class-5", "Class-6", "Class-7", "Class-8"]
+            lldp-remote-port-power-priority:
+              type: string
+              description: Indicates the power priority level assigned to the PD.
+              enum:
+                - low
+                - high
+                - critical
+            lldp-remote-port-pd-requested-power:
+              type: number
+              description: Power requested by the PD in watts (0.1W resolution possible). The values must be presented with real values like 25.5, 20.5 etc.
+            lldp-remote-port-pse-available-power:
+              type: number
+              description: Power that the PSE port is able to provide in watts (0.1W resolution).
         lldp-remote-port-lag-info:
           type: object
           description: Provides information about the remote port’s involvement in Link Aggregation Groups (LAG), if applicable.
@@ -130,3 +147,39 @@ items:
             lldp-remote-port-lag-port-id:
               type: integer
               description: Displays the identifier of the Link Aggregation Group (LAG) that the remote port belongs to.
+        lldp-remote-port-location:
+          type: object
+          description: Location information provided by LLDP-MED.
+          properties:
+            location-subtype:
+              type: string
+              description: Indicates the type of location information being conveyed.
+              enum:
+                - coordinate
+                - civic-address
+                - elin
+            civic-addr:
+              type: array
+              description: Civic address information consisting of CA-Type and CA-Value pairs as per LLDP-MED.
+              items:
+                type: object
+                properties:
+                  ca-type:
+                    type: integer
+                    description: Civic Address Type identifier (e.g., 1 = Language, 3 = Country, 6 = A1 state/province, etc.)
+                  ca-value:
+                    type: string
+                    description: Civic Address Value corresponding to the type.
+            coordinates:
+              type: object
+              description: Location coordinates information.
+              properties:
+                latitude:
+                  type: string
+                  description: Latitude in decimal degrees (e.g., +37.7749).
+                longitude:
+                  type: string
+                  description: Longitude in decimal degrees (e.g., -122.4194).
+            elin:
+              type: string
+              description: Emergency Location Identification Number (ELIN) assigned to endpoint location

ucentral.schema.full.json

@@ -777,7 +777,7 @@
                     "storm-control": {
                         "description": "Storm Control configuration per storm type. Allows enabling or disabling traffic storm control for broadcast, multicast, and unknown unicast packets, with independent packet-per-second (pps) thresholds. A limit-pps value of 0 implies the control is disabled for that traffic type.",
                         "type": "object",
-                        "properties": null,
+                        "properties": {
                             "broadcast-pps": {
                                 "type": "integer",
                                 "minimum": 0,
@@ -799,6 +799,7 @@
                         }
                     }
                 }
+            }
         },
         "switch": {
             "description": "This section defines the switch fabric specific features of a physical switch.",
@@ -852,6 +853,65 @@
                                 ]
                             }
                         },
+                        "bridge-prio": {
+                            "description": "Bridge priority for root election. Ranging from 0\u201361440 (in steps of 4096)",
+                            "type": "integer",
+                            "default": 32768
+                        },
+                        "forward-delay-secs": {
+                            "description": "Time in seconds a port stays in Listening and Learning states before transitioning to Forwarding.",
+                            "type": "integer"
+                        },
+                        "hello-time-secs": {
+                            "description": "Determines how often switches send BPDU.",
+                            "type": "integer"
+                        },
+                        "max-age-secs": {
+                            "description": "Maximum time (in seconds) before a BPDU is considered invalid.",
+                            "type": "integer"
+                        },
+                        "pathcost-method": {
+                            "description": "Specifies the method used for path cost calculation. - short, 16-bit values (0\u201365535), IEEE 802.1D - long, 32-bit values (0\u2013200,000,000), IEEE 802.1w",
+                            "type": "string",
+                            "enum": [
+                                "short",
+                                "long"
+                            ]
+                        },
+                        "bpdu-flooding": {
+                            "description": "Configures how BPDUs are flooded to spanning-tree disabled ports. - to-all, Flood to all STP-disabled ports - to-vlan, Flood to STP-disabled ports within the same VLAN",
+                            "type": "string",
+                            "enum": [
+                                "to-all",
+                                "to-vlan"
+                            ]
+                        },
+                        "bpdu-tx-limit": {
+                            "description": "Maximum number of BPDU transmissions allowed per Hello interval.",
+                            "type": "integer"
+                        },
+                        "root-guard": {
+                            "description": "Enable Root Guard globally to prevent designated ports from becoming root.",
+                            "type": "boolean"
+                        },
+                        "mst-region": {
+                            "description": "MSTP region-wide configuration. Applicable when protocol is mstp.",
+                            "type": "object",
+                            "properties": {
+                                "name": {
+                                    "description": "Name of multiple spanning tree region.",
+                                    "type": "string",
+                                    "maxLength": 32,
+                                    "minLength": 1
+                                },
+                                "revision": {
+                                    "description": "MST region revision number.",
+                                    "type": "integer",
+                                    "maximum": 65535,
+                                    "minimum": 0
+                                }
+                            }
+                        },
                         "instances": {
                             "description": "Define a list of configuration for each STP instance. Meaning of this field depends on current STP protocol (switch.loop-detection.protocol)",
                             "type": "array",
@@ -868,24 +928,36 @@
                                         "default": true
                                     },
                                     "priority": {
-                                        "description": "Bridge priority.",
+                                        "description": "MST priority.",
                                         "type": "integer",
                                         "default": 32768
                                     },
-                                    "forward_delay": {
+                                    "forward-delay": {
                                         "description": "Defines the amount of time a switch port stays in the Listening and Learning states before transitioning to the Forwarding state.",
                                         "type": "integer",
                                         "default": 15
                                     },
-                                    "hello_time": {
+                                    "hello-time": {
                                         "description": "Determines how often switches send BPDU.",
                                         "type": "integer",
                                         "default": 2
                                     },
-                                    "max_age": {
+                                    "max-age": {
                                         "description": "Specifies the maximum time that a switch port should wait to receive a BPDU from its neighbor before considering the link as failed or disconnected.",
                                         "type": "integer",
                                         "default": 20
+                                    },
+                                    "path-cost": {
+                                        "description": "Path cost for this MST instance.",
+                                        "type": "integer"
+                                    },
+                                    "vlan-start": {
+                                        "description": "VLAN starting range assigned to this MST instance.",
+                                        "type": "integer"
+                                    },
+                                    "vlan-end": {
+                                        "description": "VLAN ending range assigned to this MST instance.",
+                                        "type": "integer"
                                     }
                                 }
                             }
@@ -1288,7 +1360,7 @@
                                         "description": "Configures the peer-link, which could be a physical port or a trunk group that connects the two MC-LAG peer switches.",
                                         "type": "object",
                                         "properties": {
-                                            "type": {
+                                            "link-type": {
                                                 "description": "Defines the type of peer-link, either 'port' or 'trunk-group'",
                                                 "type": "string",
                                                 "enum": [
@@ -1297,8 +1369,16 @@
                                                 ],
                                                 "default": "trunk-group"
                                             },
-                                            "value": {
+                                            "port-id": {
-                                                "description": "Specifies the port or trunk-group ID for the peer-link.",
+                                                "description": "Specifies the physical port name used as peer-link (only valid if type = port).",
+                                                "type": "string",
+                                                "examples": [
+                                                    "Ethernet1",
+                                                    "Ethernet2"
+                                                ]
+                                            },
+                                            "trunk-id": {
+                                                "description": "Specifies the trunk group ID used as peer-link (only valid if type = trunk-group).",
                                                 "type": "integer",
                                                 "minimum": 1,
                                                 "maximum": 64
@@ -1306,7 +1386,9 @@
                                         }
                                     },
                                     "mclag-group": {
-                                        "description": "Configures the MC-LAG group, which binds the interfaces into a multi-chassis LAG.",
+                                        "description": "Configures the MC-LAG group(s), which binds the interfaces into a multi-chassis LAG.",
+                                        "type": "array",
+                                        "items": {
                                             "type": "object",
                                             "properties": {
                                                 "group-id": {
@@ -1322,8 +1404,8 @@
                                                         "type": "string",
                                                         "description": "Interface names that are part of the MC-LAG group.",
                                                         "examples": [
-                                                        "eth0",
+                                                            "Ethernet0",
-                                                        "eth1"
+                                                            "Ethernet1"
                                                         ]
                                                     }
                                                 },
@@ -1357,6 +1439,7 @@
                                                     }
                                                 }
                                             }
+                                        }
                                     },
                                     "system-priority": {
                                         "description": "Specifies the system priority used by the switch for LACP negotiations.",

ucentral.schema.json

@@ -687,7 +687,7 @@
                 },
                 "storm-control": {
                     "type": "object",
-                    "properties": null,
+                    "properties": {
                         "broadcast-pps": {
                             "type": "integer",
                             "minimum": 0,
@@ -705,6 +705,7 @@
                         }
                     }
                 }
+            }
         },
         "switch.arp-inspect": {
             "type": "object",
@@ -1106,6 +1107,54 @@
                                 ]
                             }
                         },
+                        "bridge-prio": {
+                            "type": "integer",
+                            "default": 32768
+                        },
+                        "forward-delay-secs": {
+                            "type": "integer"
+                        },
+                        "hello-time-secs": {
+                            "type": "integer"
+                        },
+                        "max-age-secs": {
+                            "type": "integer"
+                        },
+                        "pathcost-method": {
+                            "type": "string",
+                            "enum": [
+                                "short",
+                                "long"
+                            ]
+                        },
+                        "bpdu-flooding": {
+                            "type": "string",
+                            "enum": [
+                                "to-all",
+                                "to-vlan"
+                            ]
+                        },
+                        "bpdu-tx-limit": {
+                            "type": "integer"
+                        },
+                        "root-guard": {
+                            "type": "boolean"
+                        },
+                        "mst-region": {
+                            "type": "object",
+                            "properties": {
+                                "name": {
+                                    "type": "string",
+                                    "maxLength": 32,
+                                    "minLength": 1
+                                },
+                                "revision": {
+                                    "type": "integer",
+                                    "maximum": 65535,
+                                    "minimum": 0
+                                }
+                            }
+                        },
                         "instances": {
                             "type": "array",
                             "items": {
@@ -1122,17 +1171,26 @@
                                         "type": "integer",
                                         "default": 32768
                                     },
-                                    "forward_delay": {
+                                    "forward-delay": {
                                         "type": "integer",
                                         "default": 15
                                     },
-                                    "hello_time": {
+                                    "hello-time": {
                                         "type": "integer",
                                         "default": 2
                                     },
-                                    "max_age": {
+                                    "max-age": {
                                         "type": "integer",
                                         "default": 20
+                                    },
+                                    "path-cost": {
+                                        "type": "integer"
+                                    },
+                                    "vlan-start": {
+                                        "type": "integer"
+                                    },
+                                    "vlan-end": {
+                                        "type": "integer"
                                     }
                                 }
                             }
@@ -1473,7 +1531,7 @@
                                     "peer-link": {
                                         "type": "object",
                                         "properties": {
-                                            "type": {
+                                            "link-type": {
                                                 "type": "string",
                                                 "enum": [
                                                     "port",
@@ -1481,7 +1539,14 @@
                                                 ],
                                                 "default": "trunk-group"
                                             },
-                                            "value": {
+                                            "port-id": {
+                                                "type": "string",
+                                                "examples": [
+                                                    "Ethernet1",
+                                                    "Ethernet2"
+                                                ]
+                                            },
+                                            "trunk-id": {
                                                 "type": "integer",
                                                 "minimum": 1,
                                                 "maximum": 64
@@ -1489,6 +1554,8 @@
                                         }
                                     },
                                     "mclag-group": {
+                                        "type": "array",
+                                        "items": {
                                             "type": "object",
                                             "properties": {
                                                 "group-id": {
@@ -1501,8 +1568,8 @@
                                                     "items": {
                                                         "type": "string",
                                                         "examples": [
-                                                        "eth0",
+                                                            "Ethernet0",
-                                                        "eth1"
+                                                            "Ethernet1"
                                                         ]
                                                     }
                                                 },
@@ -1532,6 +1599,7 @@
                                                     }
                                                 }
                                             }
+                                        }
                                     },
                                     "system-priority": {
                                         "type": "integer",

ucentral.schema.pretty.json

@@ -811,7 +811,7 @@
                 "storm-control": {
                     "description": "Storm Control configuration per storm type. Allows enabling or disabling traffic storm control for broadcast, multicast, and unknown unicast packets, with independent packet-per-second (pps) thresholds. A limit-pps value of 0 implies the control is disabled for that traffic type.",
                     "type": "object",
-                    "properties": null,
+                    "properties": {
                         "broadcast-pps": {
                             "type": "integer",
                             "minimum": 0,
@@ -832,6 +832,7 @@
                         }
                     }
                 }
+            }
         },
         "switch.arp-inspect": {
             "type": "object",
@@ -1310,6 +1311,65 @@
                                 ]
                             }
                         },
+                        "bridge-prio": {
+                            "description": "Bridge priority for root election. Ranging from 0\u201361440 (in steps of 4096)",
+                            "type": "integer",
+                            "default": 32768
+                        },
+                        "forward-delay-secs": {
+                            "description": "Time in seconds a port stays in Listening and Learning states before transitioning to Forwarding.",
+                            "type": "integer"
+                        },
+                        "hello-time-secs": {
+                            "description": "Determines how often switches send BPDU.",
+                            "type": "integer"
+                        },
+                        "max-age-secs": {
+                            "description": "Maximum time (in seconds) before a BPDU is considered invalid.",
+                            "type": "integer"
+                        },
+                        "pathcost-method": {
+                            "description": "Specifies the method used for path cost calculation. - short, 16-bit values (0\u201365535), IEEE 802.1D - long, 32-bit values (0\u2013200,000,000), IEEE 802.1w",
+                            "type": "string",
+                            "enum": [
+                                "short",
+                                "long"
+                            ]
+                        },
+                        "bpdu-flooding": {
+                            "description": "Configures how BPDUs are flooded to spanning-tree disabled ports. - to-all, Flood to all STP-disabled ports - to-vlan, Flood to STP-disabled ports within the same VLAN",
+                            "type": "string",
+                            "enum": [
+                                "to-all",
+                                "to-vlan"
+                            ]
+                        },
+                        "bpdu-tx-limit": {
+                            "description": "Maximum number of BPDU transmissions allowed per Hello interval.",
+                            "type": "integer"
+                        },
+                        "root-guard": {
+                            "description": "Enable Root Guard globally to prevent designated ports from becoming root.",
+                            "type": "boolean"
+                        },
+                        "mst-region": {
+                            "description": "MSTP region-wide configuration. Applicable when protocol is mstp.",
+                            "type": "object",
+                            "properties": {
+                                "name": {
+                                    "description": "Name of multiple spanning tree region.",
+                                    "type": "string",
+                                    "maxLength": 32,
+                                    "minLength": 1
+                                },
+                                "revision": {
+                                    "description": "MST region revision number.",
+                                    "type": "integer",
+                                    "maximum": 65535,
+                                    "minimum": 0
+                                }
+                            }
+                        },
                         "instances": {
                             "description": "Define a list of configuration for each STP instance. Meaning of this field depends on current STP protocol (switch.loop-detection.protocol)",
                             "type": "array",
@@ -1326,24 +1386,36 @@
                                         "default": true
                                     },
                                     "priority": {
-                                        "description": "Bridge priority.",
+                                        "description": "MST priority.",
                                         "type": "integer",
                                         "default": 32768
                                     },
-                                    "forward_delay": {
+                                    "forward-delay": {
                                         "description": "Defines the amount of time a switch port stays in the Listening and Learning states before transitioning to the Forwarding state.",
                                         "type": "integer",
                                         "default": 15
                                     },
-                                    "hello_time": {
+                                    "hello-time": {
                                         "description": "Determines how often switches send BPDU.",
                                         "type": "integer",
                                         "default": 2
                                     },
-                                    "max_age": {
+                                    "max-age": {
                                         "description": "Specifies the maximum time that a switch port should wait to receive a BPDU from its neighbor before considering the link as failed or disconnected.",
                                         "type": "integer",
                                         "default": 20
+                                    },
+                                    "path-cost": {
+                                        "description": "Path cost for this MST instance.",
+                                        "type": "integer"
+                                    },
+                                    "vlan-start": {
+                                        "description": "VLAN starting range assigned to this MST instance.",
+                                        "type": "integer"
+                                    },
+                                    "vlan-end": {
+                                        "description": "VLAN ending range assigned to this MST instance.",
+                                        "type": "integer"
                                     }
                                 }
                             }
@@ -1746,7 +1818,7 @@
                                         "description": "Configures the peer-link, which could be a physical port or a trunk group that connects the two MC-LAG peer switches.",
                                         "type": "object",
                                         "properties": {
-                                            "type": {
+                                            "link-type": {
                                                 "description": "Defines the type of peer-link, either 'port' or 'trunk-group'",
                                                 "type": "string",
                                                 "enum": [
@@ -1755,8 +1827,16 @@
                                                 ],
                                                 "default": "trunk-group"
                                             },
-                                            "value": {
+                                            "port-id": {
-                                                "description": "Specifies the port or trunk-group ID for the peer-link.",
+                                                "description": "Specifies the physical port name used as peer-link (only valid if type = port).",
+                                                "type": "string",
+                                                "examples": [
+                                                    "Ethernet1",
+                                                    "Ethernet2"
+                                                ]
+                                            },
+                                            "trunk-id": {
+                                                "description": "Specifies the trunk group ID used as peer-link (only valid if type = trunk-group).",
                                                 "type": "integer",
                                                 "minimum": 1,
                                                 "maximum": 64
@@ -1764,7 +1844,9 @@
                                         }
                                     },
                                     "mclag-group": {
-                                        "description": "Configures the MC-LAG group, which binds the interfaces into a multi-chassis LAG.",
+                                        "description": "Configures the MC-LAG group(s), which binds the interfaces into a multi-chassis LAG.",
+                                        "type": "array",
+                                        "items": {
                                             "type": "object",
                                             "properties": {
                                                 "group-id": {
@@ -1780,8 +1862,8 @@
                                                         "type": "string",
                                                         "description": "Interface names that are part of the MC-LAG group.",
                                                         "examples": [
-                                                        "eth0",
+                                                            "Ethernet0",
-                                                        "eth1"
+                                                            "Ethernet1"
                                                         ]
                                                     }
                                                 },
@@ -1815,6 +1897,7 @@
                                                     }
                                                 }
                                             }
+                                        }
                                     },
                                     "system-priority": {
                                         "description": "Specifies the system priority used by the switch for LACP negotiations.",

ucentral.state.pretty.json

@@ -909,6 +909,11 @@
                                 "description": "Provides a textual description of the remote port, typically describing the interface or its purpose.",
                                 "example": "Ethernet Port on unit 1, port 2"
                             },
+                            "lldp-remote-sys-name": {
+                                "type": "string",
+                                "description": "Provides a textual description of the system name string (as defined by the sending device)",
+                                "example": "Datacenter Switch-1"
+                            },
                             "lldp-remote-port-max-mtu": {
                                 "type": "string",
                                 "description": "Displays the maximum transmission unit (MTU) size that the remote port supports, indicating the largest packet size the port can handle."
@@ -1014,6 +1019,23 @@
                                             "Class-7",
                                             "Class-8"
                                         ]
+                                    },
+                                    "lldp-remote-port-power-priority": {
+                                        "type": "string",
+                                        "description": "Indicates the power priority level assigned to the PD.",
+                                        "enum": [
+                                            "low",
+                                            "high",
+                                            "critical"
+                                        ]
+                                    },
+                                    "lldp-remote-port-pd-requested-power": {
+                                        "type": "number",
+                                        "description": "Power requested by the PD in watts (0.1W resolution possible). The values must be presented with real values like 25.5, 20.5 etc."
+                                    },
+                                    "lldp-remote-port-pse-available-power": {
+                                        "type": "number",
+                                        "description": "Power that the PSE port is able to provide in watts (0.1W resolution)."
                                     }
                                 }
                             },
@@ -1034,6 +1056,56 @@
                                         "description": "Displays the identifier of the Link Aggregation Group (LAG) that the remote port belongs to."
                                     }
                                 }
+                            },
+                            "lldp-remote-port-location": {
+                                "type": "object",
+                                "description": "Location information provided by LLDP-MED.",
+                                "properties": {
+                                    "location-subtype": {
+                                        "type": "string",
+                                        "description": "Indicates the type of location information being conveyed.",
+                                        "enum": [
+                                            "coordinate",
+                                            "civic-address",
+                                            "elin"
+                                        ]
+                                    },
+                                    "civic-addr": {
+                                        "type": "array",
+                                        "description": "Civic address information consisting of CA-Type and CA-Value pairs as per LLDP-MED.",
+                                        "items": {
+                                            "type": "object",
+                                            "properties": {
+                                                "ca-type": {
+                                                    "type": "integer",
+                                                    "description": "Civic Address Type identifier (e.g., 1 = Language, 3 = Country, 6 = A1 state/province, etc.)"
+                                                },
+                                                "ca-value": {
+                                                    "type": "string",
+                                                    "description": "Civic Address Value corresponding to the type."
+                                                }
+                                            }
+                                        }
+                                    },
+                                    "coordinates": {
+                                        "type": "object",
+                                        "description": "Location coordinates information.",
+                                        "properties": {
+                                            "latitude": {
+                                                "type": "string",
+                                                "description": "Latitude in decimal degrees (e.g., +37.7749)."
+                                            },
+                                            "longitude": {
+                                                "type": "string",
+                                                "description": "Longitude in decimal degrees (e.g., -122.4194)."
+                                            }
+                                        }
+                                    },
+                                    "elin": {
+                                        "type": "string",
+                                        "description": "Emergency Location Identification Number (ELIN) assigned to endpoint location"
+                                    }
+                                }
                             }
                         }
                     }