scottk/oopt-gnpy
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/oopt-gnpy.git synced 2025-10-31 18:18:00 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity
1,278 Commits 10 Branches 30 Tags
d9924acbf120c481e81262af43650fd80619c78e
Commit Graph

31 Commits

Author SHA1 Message Date
EstherLerouzic
93dfadca35 Change ref_power to ref_carrier 
P_span0 and p_spani record powers for the noiseless reference, but not
its other attributes (baud rate, roll-off, ...). we add this ref_carrier
specification in the function call. This will be usefull for example
to compute power spectral density.

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Ic7441afa12ca5273ff99dea0268e439276107257
 2021-10-04 10:41:06 +02:00
EstherLerouzic
12e58e3dbf Add a user defined initial spectrum in propagation functions 
A new function is added to use requests specs based on transceivers
and on user definition of mixed rates and powers.

Propagation functions are changed so that, if the user defines a
specific distribution, then they use it else they use as before,
all identical channels based on the initial request. In this case,
as before this change, we assume full load, with same channel for
the spectral info and not the resulting mixt of channels after
routing.

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Icf56396837b77009e98accd27fcebd2dded6d112
 2021-10-04 10:40:25 +02:00
EstherLerouzic
4f9193fab4 Add utilities 
- to create a reference channel based on SI
- to convert from to watt, mW, dBm, power spectral density ...

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I9b9684c1ad096aa54d01ef3f0242ecd2dcae79aa
 2021-10-04 10:04:06 +02:00
Jan Kundrát
0dc7d853ef Merge changes I7f6cc553,I0a6a8442,I34fe2dcf 
* changes:
  requests: avoid TypeError
  add an invocation test with power saturation
  Update a roadm test to include more cases for power handling
 2021-09-15 13:09:32 +00:00
Jan Kundrát
f250990a49 requests: avoid TypeError 
When printing a Request which had its baud_rate set and bit_rate unset,
the code would hit a TypeError.

Fixes: https://review.gerrithub.io/c/Telecominfraproject/oopt-gnpy/+/521471
Change-Id: I7f6cc553c07fd8e7d1ef32866d9f711a32016744
 2021-09-15 14:59:59 +02:00
Jonas Mårtensson
22541d65e4 Check for non-existing N or M values when comparing requests 
The compare_reqs function checks if N and M values of the requests are
None but these attributes may not exist e.g. if a service file does not
define an "effective-freq-slot" for a request.

Signed-off-by: Jonas Mårtensson <jonas.martensson@ri.se>
Change-Id: I786aad97ed658cd703694f164a87525d77b51fe1
 2021-08-31 22:52:10 +02:00
EstherLerouzic
718007b3de Do not agregate requests which have non None N,M spectrum values 
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Ib103e3292887c863e7c1cd785ffbffba629d0d02
 2021-08-31 11:31:16 +02:00
EstherLerouzic
75e7fca8e4 change M value from 0 to None in case of blocking 
Change tests based on M==0 value for response creation and use
instead the blocking_reason attribute existence
result element should have non null M value if request is not blocked.

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I67e4222cf9d014201e91d3aefd3624b001264e03
 2021-08-31 11:31:16 +02:00
EstherLerouzic
299ca10a47 Add a consistency check on request before any propagation is performed 
In case user defines trx_mode, it is possible to check consistency of
nb of required slots and the total requested path_bandwidth and raise
a service error, before staring any propagation computation.

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I543cab581280faef5d6072eb172da136f2542492
 2021-08-31 11:31:16 +02:00
EstherLerouzic
7f7c568160 Enabling the reading of N and M value from the json request 
For this commit only the first element from the {N, M} list is read
and assigned.

This is better than not reading this value at all.

the commit also updates test_files and test data files with correct
values for the effective_freq_slot attribute

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I1e60fe833ca1092b40de27c8cbfb13083810414e
 2021-08-31 11:31:07 +02:00
EstherLerouzic
9bf6ed953a Add a new cause of blocking 
if the user has specified a nb of slot and has not specified a mode
it may happen that the nb of slot is finally not large enough to support
the requested traffic: then blocking reason is 'NOT_ENOUGH_RESERVED_SPECTRUM'

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I8d4c4df5fa97e37aefac8d9ee0d93c901505fa55
 2021-08-31 11:23:08 +02:00
EstherLerouzic
e68dc39ddd Avoid overwriting blocking reason 
When a path is blocked for 'NO_FEASIBLE_MODE' reason, and bidir is true,
the request attributes are filled with the last explored mode values
(baudrate notably), and the reversed path is propagated with this last
explored mode specs. if this reversed path is also not feasible the blocking
reason was overwritten with a 'MODE_NOT_FESIBLE' reasonn, because
baudrate is filled in the request attribute.

This change ensure that the blocking reason (if it exists) is not overwritten.

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: If80a37d77e2b967a327562c733a44e7f78f1c544
 2021-08-31 11:23:08 +02:00
Jan Kundrát
f8007b41d1 Merge changes from topic "refactor disjunction" 
* changes:
  adding another set of test for disjunction
  Minor refactor
  Refactor step4 of the compute_path_dsjctn
 2021-08-31 09:19:57 +00:00
EstherLerouzic
b867c57bee bugfix: don't check a reversed path that has no baudrate 
without this change if a request was blocked on main path due to 'NO_FEASIBLE_BAUDRATE_WITH_SPACING'
and if the request was bidir, there was a propagation tentative on the reversed path
despite the fact that no baudrate was selected, which ended up with a program crash.

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Ie4e578aab944e534d8b2d99fb02c4e28a242e717
 2021-05-20 16:53:16 +02:00
EstherLerouzic
902cfa11a7 Minor refactor 
Correct comments

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I99874f08625bade15223cfbbd3cd933419fb5c66
 2021-02-04 10:02:51 +01:00
EstherLerouzic
24c6acc027 Refactor step4 of the compute_path_dsjctn 
Previous implementation selected last candidate in case both routing
and disjunction constraints could not be applied. The new implementation
elaborates an alternate list where each feasible paths satisfyng
disjunction constraint but not route constraint is recorded. The algorithm
then preferably selects a feasible path that satisfies all constraints and
if none is found and route constraint is LOOSE, the first set of paths
that satisfy disjunction is selected (instead of the last one).

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Iba44397d105006a98539494d821cc83dc3e3bbd9
 2021-02-04 10:02:51 +01:00
Jan Kundrát
59c3895a51 Merge "Remove while loop to avoid infinite loop" 2020-11-24 16:27:22 +00:00
EstherLerouzic
c56ea898a6 Add per degree channel power target out 
- add the per degree info using the EXACT next node uid as identifier
  of the degree when a node is a roadm
- add the degree identifier on the propagate and on the call functions
- use the per degree target_pch_out_db defined in json entry for the
  target power in network build
- verifies existence of the per degree power target in order to support
  partial per degree target power definition
- correct test data files for expected auto design results that now
  should include the per degree information, even if it is the same
  for all degree.
- in order to enable per degree power definition on direction where
  booster is not defined, enable the declaration of edfas in json without
  specifying type variety

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I5004cbb250ca5fd6b6498ac9d4b9c4f28a65efee
 2020-11-03 16:44:21 +01:00
EstherLerouzic
6dd40935b7 Remove while loop to avoid infinite loop 
In the previous implementation, when a constraint was added on top of
the disjunction, there could be an infinite loop because the test was
not correctly performed on the request_id but on a request class.
Moreover, there the loop was not needed since the first feasible
candidate is selected if it exist.
This patch removes the loop and adds some comments to explain the code.

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Icdbee9032f28214b3e03cb62d55ea353477d94bf
 2020-10-21 15:17:08 +02:00
Jan Kundrát
e6ee512001 Explicitly consider "system margins" instead of stashing them to transponder modes 
Since 30234f913c, the code just added the
"system margins" to each transponder's minimal required OSNR. That's
simple and straightforward, but I think that mutating "equipment
library" in response to a "global simulation parameter" is not really
the right way to go.

Make this explicit; always check the resulting OSNR against the
transponder's minimum plus the margin.

I got into this when checking the fixups that are performed within the
JSON loader. I don't think that the JSON loader is an appropriate place
for this.

Change-Id: Ic8f8385cbbb29dc0d769462f17caad47c2b36940
 2020-09-15 10:04:15 +02:00
Jonas Mårtensson
1d657d6819 Return spectral info from propagate function 
There are two propagation functions in request.py, propagate and
propagate2. The propagate2 function saves and returns spectral infos
from before and after every element of the path. In most cases only the
final spectral info after propagation is needed (there is currently
nothing in the code using anything more). On the other hand, the
propagate function just returns the path which is unnecessary since that
is modified in place. This patch proposes to instead return the final
spectral info from the propagate function.

Since propagate2 is now redundant, it can be removed.

Change-Id: I3a0f7310a7d5f9c93dc5f257e051c7d45e20c6fe
Signed-off-by: Jonas Mårtensson <jonas.martensson@ri.se>
 2020-06-25 19:41:03 +02:00
Jonas Mårtensson
0b965d931c Don't include add_drop_osnr when there is no ROADM in path 
The parameter add_drop_osnr is specified in the Roadm section of
eqpt_config.json and represents noise added by amplifiers within the
add/drop block of ROADMs. Currently this noise is added to the signal
whether the propagation path includes any ROADMs or not, which does not
make sense to me. This patch proposes to only add the add_drop_osnr when
a path actually includes ROADMs.

See GitHub issue #274.

Change-Id: I58961772c049578eff8879dfb2e53265866d12c4
Signed-off-by: Jonas Mårtensson <jonas.martensson@ri.se>
 2020-06-22 10:06:04 +02:00
Jonas Mårtensson
d3eaa4d7ba Include tx_osnr when printing first transceiver 
(Migrated from GitHub PR #311)

Currently the output of transmission_main_example shows the first
transceiver having ONSR = +inf even when a tx_osnr has been specified,
which is confusing.

This patch proposes to update the SNR of the first transceiver with
tx_osnr.

Change-Id: Idab7c92c2f5a12cc92ce5c1c551e5710f30e6a02
Signed-off-by: Jonas Mårtensson <jonas.martensson@ri.se>
 2020-06-18 21:39:44 +02:00
Jonas Mårtensson
cc11bd186c Update compute_constrained_path 
This patch proposes a new implementation of the compute_constrained_path function based on the same method as the newly proposed compute_k_constrained_paths function, i.e. using shortest_simple_paths instead of all_simple_paths. This method is more efficient and avoids having to set a cutoff parameter. The new implementation should be identical to the old one from an external perspective, except that it finds a path with include node constraints in more cases.

Change-Id: Ia93b61c0af27076ed5088013bc87787a2920b629
Signed-off-by: Jonas Mårtensson <jonas.martensson@ri.se>
 2020-06-03 20:57:39 +02:00
Jan Kundrát
1b2b048b47 reorganization: move request processing and request disjunction handling into topology.requests 
Change-Id: I14902a2e15cc5fd27530cb294f4f549f6974fd49
 2020-05-23 22:03:23 +02:00
Jan Kundrát
11509f5686 requests: simplify ResultElement inheritance 
This has been the only place where content from gnyp.tools.service_sheet
was being used outside of tests and examples. It looks like something
which is actually *not* used anywhere (the ResultElement instances are
only ever apended to a list which gets used as-is, so we do not need any
custom comparisons or hashing).

Change-Id: Ib6ddcf55779218d602620e77973d88ad62d0ec7b
 2020-05-23 15:23:27 +02:00
Jan Kundrát
785c823fa2 coding style: separate property definitions from each other 
While not strictly needed in Python, it's much clearer this way.

Change-Id: I5f8caccde6440cb4032aae5deae577d328834a75
 2020-05-23 15:23:27 +02:00
Jan Kundrát
9faf6430a5 reorganization: gnpy/{core => tools}/service_sheet.py 
Change-Id: I88559cc718536f222b8ea9829bcc72a425c062ca
 2020-05-23 15:23:27 +02:00
Jan Kundrát
faccc23018 Always use our ansi_escapes module 
Change-Id: I27bac671caa7544f51e7935ee120c9fcd6c942a7
 2020-05-19 13:59:56 +02:00
Jan Kundrát
46f89aa770 coding style: autopep8 in an aggressive mode (-aaaaaaaaaa) 
I decided to skip the following chunk of the diff because I think that
it would actually made the code a bit harder to read:

diff --git gnpy/core/service_sheet.py gnpy/core/service_sheet.py
index 9965840..9834111 100644
--- gnpy/core/service_sheet.py
+++ gnpy/core/service_sheet.py
@@ -41,8 +41,22 @@ logger = getLogger(__name__)

 class Request(namedtuple('Request', 'request_id source destination trx_type mode \
     spacing power nb_channel disjoint_from nodes_list is_loose path_bandwidth')):
-    def __new__(cls, request_id, source, destination, trx_type,  mode=None, spacing=None, power=None, nb_channel=None, disjoint_from='',  nodes_list=None, is_loose='', path_bandwidth=None):
-        return super().__new__(cls, request_id, source, destination, trx_type, mode, spacing, power, nb_channel, disjoint_from,  nodes_list, is_loose, path_bandwidth)
+    def __new__(
+            cls,
+            request_id,
+            source,
+            destination,
+            trx_type,
+            mode=None,
+            spacing=None,
+            power=None,
+            nb_channel=None,
+            disjoint_from='',
+            nodes_list=None,
+            is_loose='',
+            path_bandwidth=None):
+        return super().__new__(cls, request_id, source, destination, trx_type, mode, spacing,
+                               power, nb_channel, disjoint_from, nodes_list, is_loose, path_bandwidth)

 # Type for output data:  // from dutc

diff --git tests/test_automaticmodefeature.py tests/test_automaticmodefeature.py
index 0e5f633..5ba5881 100644
--- tests/test_automaticmodefeature.py
+++ tests/test_automaticmodefeature.py
@@ -32,7 +32,26 @@ eqpt_library_name = Path(__file__).parent.parent / 'tests/data/eqpt_config.json'
 @pytest.mark.parametrize("net", [network_file_name])
 @pytest.mark.parametrize("eqpt", [eqpt_library_name])
 @pytest.mark.parametrize("serv", [service_file_name])
-@pytest.mark.parametrize("expected_mode", [['16QAM', 'PS_SP64_1', 'PS_SP64_1', 'PS_SP64_1', 'mode 2 - fake', 'mode 2', 'PS_SP64_1', 'mode 3', 'PS_SP64_1', 'PS_SP64_1', '16QAM', 'mode 1', 'PS_SP64_1', 'PS_SP64_1', 'mode 1', 'mode 2', 'mode 1', 'mode 2', 'nok']])
+@pytest.mark.parametrize("expected_mode",
+                         [['16QAM',
+                           'PS_SP64_1',
+                           'PS_SP64_1',
+                           'PS_SP64_1',
+                           'mode 2 - fake',
+                           'mode 2',
+                           'PS_SP64_1',
+                           'mode 3',
+                           'PS_SP64_1',
+                           'PS_SP64_1',
+                           '16QAM',
+                           'mode 1',
+                           'PS_SP64_1',
+                           'PS_SP64_1',
+                           'mode 1',
+                           'mode 2',
+                           'mode 1',
+                           'mode 2',
+                           'nok']])
 def test_automaticmodefeature(net, eqpt, serv, expected_mode):
     equipment = load_equipment(eqpt)
     network = load_network(net, equipment)

Change-Id: I522c45c079b3a9540568657e2ae0a4bfc5fb1272
 2020-05-19 12:53:11 +02:00
Jan Kundrát
145653df6e reorganization: gnpy/{core => topology}/request.py 
Change-Id: Ib399549479b56634c681930aa444b657e5f58ca7
 2020-05-19 11:56:02 +02:00