the automatic add_missing_elements function is updated to insert
multiband booster, preamp or inline amplifiers based on the OMS
nature. If nothing is stated, then uses Edfas.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I968a2fc0a3da97aecb7b513ff211491b20cdd4f2
Compute the tilts only if raman-flag in sim_params is turned on.
Use actual input power in fiber (according to expected propagation
during design).
Creates a function that computes the expected tilt after propagation
in a span, and returns the normalized power difference at the center
frequency of each band, and the tilt experenced between lower and
upper frequency in each band.
Include the expected tilt when computing target gains of amplifiers.
Current function requires that the bands remain in the same order.
(ordering is ensured when creating the objects).
Change-Id: I28bdf13f2010153175e8b6d199fd8eea15d7b292
make sure that selected amplifiers (single or multiband) have a band
that encompasses design_band.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I8b66755efbe8413f32328b9e02099ffdedd4b7ed
Introduce a design_band parameter in ROADM and Transceiver.
- if nothing is defined, use SI band(s)
- if design band is defined in ROADM, use this one for all degrees
- if per degree design band is defined, use this one instead
unsupported case: single band OMS with default multiband design band.
Check that these definitions are consistent with actual amplifiers
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Ibea4ce6e72d2b1e96ef8cf4efaf499530d24179c
gnpy currently uses the same parameter for tx output power and span
input power: this prevents from modelling low tx power effect.
This patch introduces a new tx-cannel-power and uses it to
propagate in ROADM.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Id3ac75e2cb617b513bdb38b51a52e05d15af46f5
The recent refactor removed a default pref in case of transceivers-OMS
(amplified links starting with a transceiver).
This resulted in a mismatch between input power during design
(default 0 forced in the function) and the design ref power using SI
power_dbm.
This change ensures that the same power is used for the input power
and for the design ref power, and avoid inconsistent gain computatiion.
The code has been using the same power input (SI power_dbm) to define the
power target out of a transceiver and the target out of amplifiers
(at the input of fibers). This will be changed in a future patch.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I610c8df19039bcf156a8ba77c79114b22913a538
Remove the visualisation of the effective_pch in amp because actual
and target are the relevant ones. effective_pch was artificially
related to a mix of reference channel and noisy channel (mixed between
on the fly redesign but using actual ROADM equalisation which includes noise
in its actual loss).
the change does no more rely on the target power (which is rounded)
but on the designed gain, which is not rounded.
Propagations are slightly changed for openroadm simulations because of that.
(I verified)
The gain of amp was estimated on the fly with p_spni also in case of
RamanFiber preceding elements. removing p_spani requies that an estimation
of Raman gain be done during design.
This commit also adds this estimation.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I960b85e99f85a7d168ac5349e325c4928fa5673b
make sure that their loss is not concatenated
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I63678dd5b72f7f6984101c4367320f3f981cb573
The old code assumed that the Fused node only connects Fiber nodes. In a
sequence of Fused - Amplifier - Fused - Fiber, the Amplifier would be
included by a mistake. In addition, the code was not that easy to read,
and it just instantiated StopIteration without raising that (which would
be an error in a generator context). It was also rather strict, failing
if the iterator was requested for an "edge node" (a transponder), and
one of the exceptions was not actually an f-string.
Finally, the span_loss function would occasionally report wrong values
(for example in the provided test case, span_loss("fused7") would say 1
instead of 17).
Fix this by making sure that prev_node_generator() and
next_node_generator() never return anything but Fiber and Fused nodes,
which made it possible to simplify the span_loss() function. This should
now properly account for the accumulated losses of an arbitrary sequence
of Fiber and Fused elements.
I went over this a few times because set_egress_amplifier() calls
span_loss() on a *ROADM* node type. That does not make any sense, and
the code deals with this "properly" by returning a loss of 0 dB. It was
a bit confusing for me to see that it's actually OK to ask for a "span
loss" that's identified by a ROADM.
A side effect of this code is that Fused instances that are isolated
from the rest of the topology no longer raise an exception. I was
thinking about preserving this (because for GNPy, the only element with
no previous or no next nodes are the transceivers, but then Esther's
test topology contains an isolated `fused4` element. If we want to make
this strict, we can do that easily like this:
--- a/gnpy/core/network.py
+++ b/gnpy/core/network.py
@@ -162,10 +162,12 @@ _fiber_fused_types = (elements.Fused, elements.Fiber)
def prev_node_generator(network, node):
"""fused spans interest:
iterate over all predecessors while they are Fused or Fiber type"""
try:
prev_node = next(network.predecessors(node))
except StopIteration:
- return
+ if isinstance(node, elements.Transceiver):
+ return
+ raise NetworkTopologyError(f'Node {node.uid} is not properly connected, please check network topology')
if isinstance(prev_node, _fiber_fused_types) and isinstance(node, _fiber_fused_types):
yield prev_node
yield from prev_node_generator(network, prev_node)
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Co-authored-by: Jan Kundrát <jan.kundrat@telecominfraproject.com>
Change-Id: I41a65e89eef763f82e41e52bc325ed2d488cb601
