scottk/oopt-gnpy
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/oopt-gnpy.git synced 2025-10-30 17:47:50 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity
Files
54a3725e1788bea722729cc047b04114d5b42f8f
oopt-gnpy/gnpy/tools/json_io.py
EstherLerouzic 54a3725e17 Add a -spectrum option to input external file to define spectrum 
The option is only set for gnpy-transmission-main.

The spectrum file is a list of spectrum objects, each defining
f_min, f_max and spectrum attributes using the same meaning as SI
in eqpt_config.json for baud_rate, roll_off, tx_osnr. slot_width is
used for the occupation of each carrier around their central frequency,
so slot_width corresponds to spacing of SI.
Unlike SI, the frequencies are defined includint f_min and f_max.
The partitions must be contiguous not overlapping.

Pref.p_span0 object records the req_power, while
ref_carrier records info that will be useful for equalization ie baud_rate.

For now, I have not integrated the possibility to directly use
transceivers type and mode in the list.

User can define sets of contiguous channels and a label to identify
the spectrum bands. If no label are defined, the program justs uses
the index + baud rate of the spectrum bands as label.

Print results per spectrum label

If propagated spectrum has mixed rates, then prints results (GSNR and OSNR)
for each propagated spectrum type according to its label.

Print per label channel power of elements

Per channel power prints were previously only showing the noiseless
reference channel power and only an average power.
With this change, we add a new information on the print:
the average total power (signal + noise + non-linear noise).
If there are several spectrum types propagating, the average per
spectrum is displayed using the label.
For this purpose, label and total power are recorded in each element
upon propagation

Note that the difference between this total power and the existing
channel power represents the added noise for the considered OMS.
Indeed ROADMs equalize per channel total power, so that power displayed
in 'actual pch (dBm)' may contain some noise contribution accumulated
with previous propagation.
Because 'reference pch out (dBm)' is for the noiseless reference,
it is exactly set to the target power and 'actual pch (dBm)' is always
matching 'reference pch out (dBm)' in ROADM prints.

Add examples and tests for -spectrum option

initial_spectrum1.json reproduces exactly the case of SI
initial_spectrum2.json sets half of the spectrum with 50GHz 32Gbauds and
half with 75GHz 64 Gbauds. Power setting is not set for the second half,
So that equalization will depend on ROADM settings.

Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Ibc01e59e461e5e933e95d23dacbc5289e275ccf7
2022-11-09 14:39:25 +01:00

660 lines
29 KiB
Python
Raw Blame History

#!/usr/bin/env python3
# -*- coding: utf-8 -*-
'''
gnpy.tools.json_io
==================
Loading and saving data from JSON files in GNPy's internal data format
'''
from networkx import DiGraph
from logging import getLogger
from pathlib import Path
import json
from collections import namedtuple
from numpy import arange
from gnpy.core import ansi_escapes, elements
from gnpy.core.equipment import trx_mode_params
from gnpy.core.exceptions import ConfigurationError, EquipmentConfigError, NetworkTopologyError, ServiceError
from gnpy.core.science_utils import estimate_nf_model
from gnpy.core.utils import automatic_nch, automatic_fmax, merge_amplifier_restrictions
from gnpy.core.info import Carrier
from gnpy.topology.request import PathRequest, Disjunction, compute_spectrum_slot_vs_bandwidth
from gnpy.tools.convert import xls_to_json_data
from gnpy.tools.service_sheet import read_service_sheet
_logger = getLogger(__name__)
Model_vg = namedtuple('Model_vg', 'nf1 nf2 delta_p orig_nf_min orig_nf_max')
Model_fg = namedtuple('Model_fg', 'nf0')
Model_openroadm_ila = namedtuple('Model_openroadm_ila', 'nf_coef')
Model_hybrid = namedtuple('Model_hybrid', 'nf_ram gain_ram edfa_variety')
Model_dual_stage = namedtuple('Model_dual_stage', 'preamp_variety booster_variety')
class Model_openroadm_preamp:
pass
class Model_openroadm_booster:
pass
class _JsonThing:
def update_attr(self, default_values, kwargs, name):
clean_kwargs = {k: v for k, v in kwargs.items() if v != ''}
for k, v in default_values.items():
setattr(self, k, clean_kwargs.get(k, v))
if k not in clean_kwargs and name != 'Amp':
print(ansi_escapes.red +
f'\n WARNING missing {k} attribute in eqpt_config.json[{name}]' +
f'\n default value is {k} = {v}' +
ansi_escapes.reset)
class SI(_JsonThing):
default_values = {
"f_min": 191.35e12,
"f_max": 196.1e12,
"baud_rate": 32e9,
"spacing": 50e9,
"power_dbm": 0,
"power_range_db": [0, 0, 0.5],
"roll_off": 0.15,
"tx_osnr": 45,
"sys_margins": 0
}
def __init__(self, **kwargs):
self.update_attr(self.default_values, kwargs, 'SI')
class Span(_JsonThing):
default_values = {
'power_mode': True,
'delta_power_range_db': None,
'max_fiber_lineic_loss_for_raman': 0.25,
'target_extended_gain': 2.5,
'max_length': 150,
'length_units': 'km',
'max_loss': None,
'padding': 10,
'EOL': 0,
'con_in': 0,
'con_out': 0
}
def __init__(self, **kwargs):
self.update_attr(self.default_values, kwargs, 'Span')
class Roadm(_JsonThing):
default_values = {
'target_pch_out_db': -17,
'add_drop_osnr': 100,
'pmd': 0,
'pdl': 0,
'restrictions': {
'preamp_variety_list': [],
'booster_variety_list': []
}
}
def __init__(self, **kwargs):
self.update_attr(self.default_values, kwargs, 'Roadm')
class Transceiver(_JsonThing):
default_values = {
'type_variety': None,
'frequency': None,
'mode': {}
}
def __init__(self, **kwargs):
self.update_attr(self.default_values, kwargs, 'Transceiver')
for mode_params in self.mode:
penalties = mode_params.get('penalties')
mode_params['penalties'] = {}
if not penalties:
continue
for impairment in ('chromatic_dispersion', 'pmd', 'pdl'):
imp_penalties = [p for p in penalties if impairment in p]
if not imp_penalties:
continue
if all(p[impairment] > 0 for p in imp_penalties):
# make sure the list of penalty values include a proper lower boundary
# (we assume 0 penalty for 0 impairment)
imp_penalties.insert(0, {impairment: 0, 'penalty_value': 0})
# make sure the list of penalty values are sorted by impairment value
imp_penalties.sort(key=lambda i: i[impairment])
# rearrange as dict of lists instead of list of dicts
mode_params['penalties'][impairment] = {
'up_to_boundary': [p[impairment] for p in imp_penalties],
'penalty_value': [p['penalty_value'] for p in imp_penalties]
}
class Fiber(_JsonThing):
default_values = {
'type_variety': '',
'dispersion': None,
'effective_area': None,
'pmd_coef': 0
}
def __init__(self, **kwargs):
self.update_attr(self.default_values, kwargs, self.__class__.__name__)
for optional in ['gamma', 'raman_efficiency']:
if optional in kwargs:
setattr(self, optional, kwargs[optional])
class RamanFiber(Fiber):
pass
class Amp(_JsonThing):
default_values = {
'f_min': 191.35e12,
'f_max': 196.1e12,
'type_variety': '',
'type_def': '',
'gain_flatmax': None,
'gain_min': None,
'p_max': None,
'nf_model': None,
'dual_stage_model': None,
'nf_fit_coeff': None,
'nf_ripple': None,
'dgt': None,
'gain_ripple': None,
'out_voa_auto': False,
'allowed_for_design': False,
'raman': False,
'pmd': 0,
'pdl': 0
}
def __init__(self, **kwargs):
self.update_attr(self.default_values, kwargs, 'Amp')
@classmethod
def from_json(cls, filename, **kwargs):
config = Path(filename).parent / 'default_edfa_config.json'
type_variety = kwargs['type_variety']
type_def = kwargs.get('type_def', 'variable_gain') # default compatibility with older json eqpt files
nf_def = None
dual_stage_def = None
if type_def == 'fixed_gain':
try:
nf0 = kwargs.pop('nf0')
except KeyError: # nf0 is expected for a fixed gain amp
raise EquipmentConfigError(f'missing nf0 value input for amplifier: {type_variety} in equipment config')
for k in ('nf_min', 'nf_max'):
try:
del kwargs[k]
except KeyError:
pass
nf_def = Model_fg(nf0)
elif type_def == 'advanced_model':
config = Path(filename).parent / kwargs.pop('advanced_config_from_json')
elif type_def == 'variable_gain':
gain_min, gain_max = kwargs['gain_min'], kwargs['gain_flatmax']
try: # nf_min and nf_max are expected for a variable gain amp
nf_min = kwargs.pop('nf_min')
nf_max = kwargs.pop('nf_max')
except KeyError:
raise EquipmentConfigError(f'missing nf_min or nf_max value input for amplifier: {type_variety} in equipment config')
try: # remove all remaining nf inputs
del kwargs['nf0']
except KeyError:
pass # nf0 is not needed for variable gain amp
nf1, nf2, delta_p = estimate_nf_model(type_variety, gain_min, gain_max, nf_min, nf_max)
nf_def = Model_vg(nf1, nf2, delta_p, nf_min, nf_max)
elif type_def == 'openroadm':
try:
nf_coef = kwargs.pop('nf_coef')
except KeyError: # nf_coef is expected for openroadm amp
raise EquipmentConfigError(f'missing nf_coef input for amplifier: {type_variety} in equipment config')
nf_def = Model_openroadm_ila(nf_coef)
elif type_def == 'openroadm_preamp':
nf_def = Model_openroadm_preamp()
elif type_def == 'openroadm_booster':
nf_def = Model_openroadm_booster()
elif type_def == 'dual_stage':
try: # nf_ram and gain_ram are expected for a hybrid amp
preamp_variety = kwargs.pop('preamp_variety')
booster_variety = kwargs.pop('booster_variety')
except KeyError:
raise EquipmentConfigError(f'missing preamp/booster variety input for amplifier: {type_variety} in equipment config')
dual_stage_def = Model_dual_stage(preamp_variety, booster_variety)
else:
raise EquipmentConfigError(f'Edfa type_def {type_def} does not exist')
json_data = load_json(config)
return cls(**{**kwargs, **json_data,
'nf_model': nf_def, 'dual_stage_model': dual_stage_def})
def _automatic_spacing(baud_rate):
"""return the min possible channel spacing for a given baud rate"""
# TODO : this should parametrized in a cfg file
# list of possible tuples [(max_baud_rate, spacing_for_this_baud_rate)]
spacing_list = [(33e9, 37.5e9), (38e9, 50e9), (50e9, 62.5e9), (67e9, 75e9), (92e9, 100e9)]
return min((s[1] for s in spacing_list if s[0] > baud_rate), default=baud_rate * 1.2)
def _spectrum_from_json(json_data):
"""JSON_data is a list of spectrum partitions each with
{f_min, f_max, baud_rate, roll_off, delta_pdb, slot_width, tx_osnr, label}
Creates the per freq Carrier's dict.
f_min, f_max, baud_rate, slot_width and roll_off are mandatory
label, tx_osnr and delta_pdb are created if not present
label should be different for each partition
>>> json_data = {'spectrum': \
[{'f_min': 193.2e12, 'f_max': 193.4e12, 'slot_width': 50e9, 'baud_rate': 32e9, 'roll_off': 0.15, \
'delta_pdb': 1, 'tx_osnr': 45},\
{'f_min': 193.4625e12, 'f_max': 193.9875e12, 'slot_width': 75e9, 'baud_rate': 64e9, 'roll_off': 0.15},\
{'f_min': 194.075e12, 'f_max': 194.075e12, 'slot_width': 100e9, 'baud_rate': 90e9, 'roll_off': 0.15},\
{'f_min': 194.2e12, 'f_max': 194.35e12, 'slot_width': 50e9, 'baud_rate': 32e9, 'roll_off': 0.15}]}
>>> spectrum = _spectrum_from_json(json_data['spectrum'])
>>> for k, v in spectrum.items():
... print(f'{k}: {v}')
...
193200000000000.0: Carrier(delta_pdb=1, baud_rate=32000000000.0, slot_width=50000000000.0, roll_off=0.15, tx_osnr=45, label='0-32.00G')
193250000000000.0: Carrier(delta_pdb=1, baud_rate=32000000000.0, slot_width=50000000000.0, roll_off=0.15, tx_osnr=45, label='0-32.00G')
193300000000000.0: Carrier(delta_pdb=1, baud_rate=32000000000.0, slot_width=50000000000.0, roll_off=0.15, tx_osnr=45, label='0-32.00G')
193350000000000.0: Carrier(delta_pdb=1, baud_rate=32000000000.0, slot_width=50000000000.0, roll_off=0.15, tx_osnr=45, label='0-32.00G')
193400000000000.0: Carrier(delta_pdb=1, baud_rate=32000000000.0, slot_width=50000000000.0, roll_off=0.15, tx_osnr=45, label='0-32.00G')
193462500000000.0: Carrier(delta_pdb=0, baud_rate=64000000000.0, slot_width=75000000000.0, roll_off=0.15, tx_osnr=40, label='1-64.00G')
193537500000000.0: Carrier(delta_pdb=0, baud_rate=64000000000.0, slot_width=75000000000.0, roll_off=0.15, tx_osnr=40, label='1-64.00G')
193612500000000.0: Carrier(delta_pdb=0, baud_rate=64000000000.0, slot_width=75000000000.0, roll_off=0.15, tx_osnr=40, label='1-64.00G')
193687500000000.0: Carrier(delta_pdb=0, baud_rate=64000000000.0, slot_width=75000000000.0, roll_off=0.15, tx_osnr=40, label='1-64.00G')
193762500000000.0: Carrier(delta_pdb=0, baud_rate=64000000000.0, slot_width=75000000000.0, roll_off=0.15, tx_osnr=40, label='1-64.00G')
193837500000000.0: Carrier(delta_pdb=0, baud_rate=64000000000.0, slot_width=75000000000.0, roll_off=0.15, tx_osnr=40, label='1-64.00G')
193912500000000.0: Carrier(delta_pdb=0, baud_rate=64000000000.0, slot_width=75000000000.0, roll_off=0.15, tx_osnr=40, label='1-64.00G')
193987500000000.0: Carrier(delta_pdb=0, baud_rate=64000000000.0, slot_width=75000000000.0, roll_off=0.15, tx_osnr=40, label='1-64.00G')
194075000000000.0: Carrier(delta_pdb=0, baud_rate=90000000000.0, slot_width=100000000000.0, roll_off=0.15, tx_osnr=40, label='2-90.00G')
194200000000000.0: Carrier(delta_pdb=0, baud_rate=32000000000.0, slot_width=50000000000.0, roll_off=0.15, tx_osnr=40, label='3-32.00G')
194250000000000.0: Carrier(delta_pdb=0, baud_rate=32000000000.0, slot_width=50000000000.0, roll_off=0.15, tx_osnr=40, label='3-32.00G')
194300000000000.0: Carrier(delta_pdb=0, baud_rate=32000000000.0, slot_width=50000000000.0, roll_off=0.15, tx_osnr=40, label='3-32.00G')
194350000000000.0: Carrier(delta_pdb=0, baud_rate=32000000000.0, slot_width=50000000000.0, roll_off=0.15, tx_osnr=40, label='3-32.00G')
"""
spectrum = {}
json_data = sorted(json_data, key=lambda x: x['f_min'])
# min freq of occupation is f_min - slot_width/2 (numbering starts at 0)
previous_part_max_freq = 0.0
for index, part in enumerate(json_data):
# default delta_pdb is 0 dB
if 'delta_pdb' not in part:
part['delta_pdb'] = 0
# add a label to the partition for the printings
if 'label' not in part:
part['label'] = f'{index}-{part["baud_rate"] * 1e-9 :.2f}G'
# default tx_osnr is set to 40 dB
if 'tx_osnr' not in part:
part['tx_osnr'] = 40
# starting freq is exactly f_min to be consistent with utils.automatic_nch
# first partition min occupation is f_min - slot_width / 2 (central_frequency is f_min)
# supposes that carriers are centered on frequency
if previous_part_max_freq > (part['f_min'] - part['slot_width'] / 2):
# check that previous part last channel does not overlap on next part first channel
# max center of the part should be below part['f_max'] and aligned on the slot_width
msg = 'Not a valid initial spectrum definition:\nprevious spectrum last carrier max occupation ' +\
f'{previous_part_max_freq * 1e-12 :.5f}GHz ' +\
'overlaps on next spectrum first carrier occupation ' +\
f'{(part["f_min"] - part["slot_width"] / 2) * 1e-12 :.5f}GHz'
raise ValueError(msg)
max_range = ((part['f_max'] - part['f_min']) // part['slot_width'] + 1) * part['slot_width']
for current_freq in arange(part['f_min'],
part['f_min'] + max_range,
part['slot_width']):
spectrum[current_freq] = Carrier(delta_pdb=part['delta_pdb'], baud_rate=part['baud_rate'],
slot_width=part['slot_width'], roll_off=part['roll_off'],
tx_osnr=part['tx_osnr'], label=part['label'])
previous_part_max_freq = current_freq + part['slot_width'] / 2
return spectrum
def load_equipment(filename):
json_data = load_json(filename)
return _equipment_from_json(json_data, filename)
def load_initial_spectrum(filename):
json_data = load_json(filename)
return _spectrum_from_json(json_data['spectrum'])
def _update_dual_stage(equipment):
edfa_dict = equipment['Edfa']
for edfa in edfa_dict.values():
if edfa.type_def == 'dual_stage':
edfa_preamp = edfa_dict[edfa.dual_stage_model.preamp_variety]
edfa_booster = edfa_dict[edfa.dual_stage_model.booster_variety]
for key, value in edfa_preamp.__dict__.items():
attr_k = 'preamp_' + key
setattr(edfa, attr_k, value)
for key, value in edfa_booster.__dict__.items():
attr_k = 'booster_' + key
setattr(edfa, attr_k, value)
edfa.p_max = edfa_booster.p_max
edfa.gain_flatmax = edfa_booster.gain_flatmax + edfa_preamp.gain_flatmax
if edfa.gain_min < edfa_preamp.gain_min:
raise EquipmentConfigError(f'Dual stage {edfa.type_variety} minimal gain is lower than its preamp minimal gain')
return equipment
def _roadm_restrictions_sanity_check(equipment):
""" verifies that booster and preamp restrictions specified in roadm equipment are listed
in the edfa.
"""
restrictions = equipment['Roadm']['default'].restrictions['booster_variety_list'] + \
equipment['Roadm']['default'].restrictions['preamp_variety_list']
for amp_name in restrictions:
if amp_name not in equipment['Edfa']:
raise EquipmentConfigError(f'ROADM restriction {amp_name} does not refer to a defined EDFA name')
def _check_fiber_vs_raman_fiber(equipment):
"""Ensure that Fiber and RamanFiber with the same name define common properties equally"""
if 'RamanFiber' not in equipment:
return
for fiber_type in set(equipment['Fiber'].keys()) & set(equipment['RamanFiber'].keys()):
for attr in ('dispersion', 'dispersion-slope', 'effective_area', 'gamma', 'pmd-coefficient'):
fiber = equipment['Fiber'][fiber_type]
raman = equipment['RamanFiber'][fiber_type]
a = getattr(fiber, attr, None)
b = getattr(raman, attr, None)
if a != b:
raise EquipmentConfigError(f'WARNING: Fiber and RamanFiber definition of "{fiber_type}" '
f'disagrees for "{attr}": {a} != {b}')
def _equipment_from_json(json_data, filename):
"""build global dictionnary eqpt_library that stores all eqpt characteristics:
edfa type type_variety, fiber type_variety
from the eqpt_config.json (filename parameter)
also read advanced_config_from_json file parameters for edfa if they are available:
typically nf_ripple, dfg gain ripple, dgt and nf polynomial nf_fit_coeff
if advanced_config_from_json file parameter is not present: use nf_model:
requires nf_min and nf_max values boundaries of the edfa gain range
"""
equipment = {}
for key, entries in json_data.items():
equipment[key] = {}
for entry in entries:
subkey = entry.get('type_variety', 'default')
if key == 'Edfa':
equipment[key][subkey] = Amp.from_json(filename, **entry)
elif key == 'Fiber':
equipment[key][subkey] = Fiber(**entry)
elif key == 'Span':
equipment[key][subkey] = Span(**entry)
elif key == 'Roadm':
equipment[key][subkey] = Roadm(**entry)
elif key == 'SI':
equipment[key][subkey] = SI(**entry)
elif key == 'Transceiver':
equipment[key][subkey] = Transceiver(**entry)
elif key == 'RamanFiber':
equipment[key][subkey] = RamanFiber(**entry)
else:
raise EquipmentConfigError(f'Unrecognized network element type "{key}"')
_check_fiber_vs_raman_fiber(equipment)
equipment = _update_dual_stage(equipment)
_roadm_restrictions_sanity_check(equipment)
return equipment
def load_network(filename, equipment):
if filename.suffix.lower() in ('.xls', '.xlsx'):
json_data = xls_to_json_data(filename)
elif filename.suffix.lower() == '.json':
json_data = load_json(filename)
else:
raise ValueError(f'unsupported topology filename extension {filename.suffix.lower()}')
return network_from_json(json_data, equipment)
def save_network(network: DiGraph, filename: str):
'''Dump the network into a JSON file
:param network: network to work on
:param filename: file to write to
'''
save_json(network_to_json(network), filename)
def _cls_for(equipment_type):
if equipment_type == 'Edfa':
return elements.Edfa
if equipment_type == 'Fused':
return elements.Fused
elif equipment_type == 'Roadm':
return elements.Roadm
elif equipment_type == 'Transceiver':
return elements.Transceiver
elif equipment_type == 'Fiber':
return elements.Fiber
elif equipment_type == 'RamanFiber':
return elements.RamanFiber
else:
raise ConfigurationError(f'Unknown network equipment "{equipment_type}"')
def network_from_json(json_data, equipment):
# NOTE|dutc: we could use the following, but it would tie our data format
# too closely to the graph library
# from networkx import node_link_graph
g = DiGraph()
for el_config in json_data['elements']:
typ = el_config.pop('type')
variety = el_config.pop('type_variety', 'default')
cls = _cls_for(typ)
if typ == 'Fused':
# well, there's no variety for the 'Fused' node type
pass
elif variety in equipment[typ]:
extra_params = equipment[typ][variety]
temp = el_config.setdefault('params', {})
temp = merge_amplifier_restrictions(temp, extra_params.__dict__)
el_config['params'] = temp
el_config['type_variety'] = variety
elif (typ in ['Fiber', 'RamanFiber']) or (typ == 'Edfa' and variety not in ['default', '']):
raise ConfigurationError(f'The {typ} of variety type {variety} was not recognized:'
'\nplease check it is properly defined in the eqpt_config json file')
el = cls(**el_config)
g.add_node(el)
nodes = {k.uid: k for k in g.nodes()}
for cx in json_data['connections']:
from_node, to_node = cx['from_node'], cx['to_node']
try:
if isinstance(nodes[from_node], elements.Fiber):
edge_length = nodes[from_node].params.length
else:
edge_length = 0.01
g.add_edge(nodes[from_node], nodes[to_node], weight=edge_length)
except KeyError:
raise NetworkTopologyError(f'can not find {from_node} or {to_node} defined in {cx}')
return g
def network_to_json(network):
data = {
'elements': [n.to_json for n in network]
}
connections = {
'connections': [{"from_node": n.uid,
"to_node": next_n.uid}
for n in network
for next_n in network.successors(n) if next_n is not None]
}
data.update(connections)
return data
def load_json(filename):
with open(filename, 'r', encoding='utf-8') as f:
data = json.load(f)
return data
def save_json(obj, filename):
with open(filename, 'w', encoding='utf-8') as f:
json.dump(obj, f, indent=2, ensure_ascii=False)
def load_requests(filename, eqpt, bidir, network, network_filename):
""" loads the requests from a json or an excel file into a data string
"""
if filename.suffix.lower() in ('.xls', '.xlsx'):
_logger.info('Automatically converting requests from XLS to JSON')
try:
return convert_service_sheet(filename, eqpt, network, network_filename=network_filename, bidir=bidir)
except ServiceError as this_e:
print(f'{ansi_escapes.red}Service error:{ansi_escapes.reset} {this_e}')
exit(1)
else:
return load_json(filename)
def requests_from_json(json_data, equipment):
"""Extract list of requests from data parsed from JSON"""
requests_list = []
for req in json_data['path-request']:
# init all params from request
params = {}
params['request_id'] = req['request-id']
params['source'] = req['source']
params['bidir'] = req['bidirectional']
params['destination'] = req['destination']
params['trx_type'] = req['path-constraints']['te-bandwidth']['trx_type']
params['trx_mode'] = req['path-constraints']['te-bandwidth']['trx_mode']
params['format'] = params['trx_mode']
params['spacing'] = req['path-constraints']['te-bandwidth']['spacing']
try:
nd_list = req['explicit-route-objects']['route-object-include-exclude']
except KeyError:
nd_list = []
params['nodes_list'] = [n['num-unnum-hop']['node-id'] for n in nd_list]
params['loose_list'] = [n['num-unnum-hop']['hop-type'] for n in nd_list]
# recover trx physical param (baudrate, ...) from type and mode
# in trx_mode_params optical power is read from equipment['SI']['default'] and
# nb_channel is computed based on min max frequency and spacing
trx_params = trx_mode_params(equipment, params['trx_type'], params['trx_mode'], True)
params.update(trx_params)
# print(trx_params['min_spacing'])
# optical power might be set differently in the request. if it is indicated then the
# params['power'] is updated
try:
if req['path-constraints']['te-bandwidth']['output-power']:
params['power'] = req['path-constraints']['te-bandwidth']['output-power']
except KeyError:
pass
# same process for nb-channel
f_min = params['f_min']
f_max_from_si = params['f_max']
try:
if req['path-constraints']['te-bandwidth']['max-nb-of-channel'] is not None:
nch = req['path-constraints']['te-bandwidth']['max-nb-of-channel']
params['nb_channel'] = nch
spacing = params['spacing']
params['f_max'] = automatic_fmax(f_min, spacing, nch)
else:
params['nb_channel'] = automatic_nch(f_min, f_max_from_si, params['spacing'])
except KeyError:
params['nb_channel'] = automatic_nch(f_min, f_max_from_si, params['spacing'])
params['effective_freq_slot'] = req['path-constraints']['te-bandwidth'].get('effective-freq-slot', [None])[0]
try:
params['path_bandwidth'] = req['path-constraints']['te-bandwidth']['path_bandwidth']
except KeyError:
pass
_check_one_request(params, f_max_from_si)
requests_list.append(PathRequest(**params))
return requests_list
def _check_one_request(params, f_max_from_si):
"""Checks that the requested parameters are consistant (spacing vs nb channel vs transponder mode...)"""
f_min = params['f_min']
f_max = params['f_max']
max_recommanded_nb_channels = automatic_nch(f_min, f_max, params['spacing'])
if params['baud_rate'] is not None:
# implicitly means that a mode is defined with min_spacing
if params['min_spacing'] > params['spacing']:
msg = f'Request {params["request_id"]} has spacing below transponder ' +\
f'{params["trx_type"]} {params["trx_mode"]} min spacing value ' +\
f'{params["min_spacing"]*1e-9}GHz.\nComputation stopped'
print(msg)
_logger.critical(msg)
raise ServiceError(msg)
if f_max > f_max_from_si:
msg = f'''Requested channel number {params["nb_channel"]}, baud rate {params["baud_rate"]} GHz
and requested spacing {params["spacing"]*1e-9}GHz is not consistent with frequency range
{f_min*1e-12} THz, {f_max*1e-12} THz, min recommanded spacing {params["min_spacing"]*1e-9}GHz.
max recommanded nb of channels is {max_recommanded_nb_channels}.'''
_logger.critical(msg)
raise ServiceError(msg)
# Transponder mode already selected; will it fit to the requested bandwidth?
if params['trx_mode'] is not None and params['effective_freq_slot'] is not None \
and params['effective_freq_slot']['M'] is not None:
_, requested_m = compute_spectrum_slot_vs_bandwidth(params['path_bandwidth'],
params['spacing'],
params['bit_rate'])
# params['effective_freq_slot']['M'] value should be bigger than the computed requested_m (simple estimate)
# TODO: elaborate a more accurate estimate with nb_wl * tx_osnr + possibly guardbands in case of
# superchannel closed packing.
if requested_m > params['effective_freq_slot']['M']:
msg = f'requested M {params["effective_freq_slot"]["M"]} number of slots for request' +\
f'{params["request_id"]} should be greater than {requested_m} to support request' +\
f'{params["path_bandwidth"] * 1e-9} Gbit/s with {params["trx_type"]} {params["trx_mode"]}'
_logger.critical(msg)
raise ServiceError(msg)
def disjunctions_from_json(json_data):
""" reads the disjunction requests from the json dict and create the list
of requested disjunctions for this set of requests
"""
disjunctions_list = []
if 'synchronization' in json_data:
for snc in json_data['synchronization']:
params = {}
params['disjunction_id'] = snc['synchronization-id']
params['relaxable'] = snc['svec']['relaxable']
params['link_diverse'] = 'link' in snc['svec']['disjointness']
params['node_diverse'] = 'node' in snc['svec']['disjointness']
params['disjunctions_req'] = snc['svec']['request-id-number']
disjunctions_list.append(Disjunction(**params))
return disjunctions_list
def convert_service_sheet(
input_filename,
eqpt,
network,
network_filename=None,
output_filename='',
bidir=False):
if output_filename == '':
output_filename = f'{str(input_filename)[0:len(str(input_filename))-len(str(input_filename.suffixes[0]))]}_services.json'
data = read_service_sheet(input_filename, eqpt, network, network_filename, bidir)
save_json(data, output_filename)
return data
Reference in New Issue View Git Blame Copy Permalink