feat: (almost) entirely remove suid (#606)

2025-10-31 18:37:47 +00:00 · 2024-11-26 15:06:03 -08:00
parent 64d0419fa0
commit 5f7a6d2a6f
13 changed files with 71 additions and 72 deletions
--- a/.github/workflows/tests/justfile_tests.bats
+++ b/.github/workflows/tests/justfile_tests.bats
@@ -17,7 +17,7 @@ setup() {
 }

@test "Ensure ujust is configured correctly for tests" {
-    run ujust logs-this-boot
+    run ujust bios
    [ "$status" -eq 0 ]
 }

--- a/docs/POSTINSTALL-README.md
+++ b/docs/POSTINSTALL-README.md
@@ -68,9 +68,8 @@ Setting a GRUB password helps protect the device from physical tampering and mit

 To set a GRUB password, use the following command. By default, the password will be required when modifying boot entries, but not when booting existing entries.

-```
-sudo grub2-setpassword
-```
+1. `run0`
+2. `grub2-setpassword`

 GRUB will prompt for a username and password. The default username is root.

--- a/files/justfiles/hardening.just
+++ b/files/justfiles/hardening.just
@@ -19,7 +19,7 @@ setup-usbguard:
    #!/usr/bin/bash
    echo "Notice: This will generate a policy based on your existing connected USB devices."
    ACTIVE_USERNAME=$(whoami)
-    pkexec sh -c '
+    run0 sh -c '
        mkdir -p /var/log/usbguard
        mkdir -p /etc/usbguard
        chmod 755 /etc/usbguard
--- a/files/justfiles/toggles.just
+++ b/files/justfiles/toggles.just
@@ -1,6 +1,6 @@
 # Toggle the cups service on/off
 toggle-cups:
-    #!/usr/bin/pkexec /usr/bin/bash
+    #! /bin/run0 /bin/bash
    if systemctl is-enabled --quiet cups; then
      firewall-cmd --permanent --remove-port=631/tcp
      firewall-cmd --permanent --remove-port=631/udp 
@@ -23,21 +23,21 @@ toggle-cups:

 # Toggle bluetooth kernel modules on/off (requires reboot)
 toggle-bluetooth-modules:
-    #!/usr/bin/pkexec /usr/bin/bash
+    #! /bin/run0 /bin/bash
    BLUE_MOD_FILE="/etc/modprobe.d/99-bluetooth.conf"
    if test -e $BLUE_MOD_FILE; then
-      sudo rm -f $BLUE_MOD_FILE
+      rm -f $BLUE_MOD_FILE
      echo "Bluetooth kernel modules disabled. Reboot to take effect."
    else
-      sudo sh -c 'echo "install bluetooth /sbin/modprobe --ignore-install bluetooth" >> "$1"' _ "$BLUE_MOD_FILE"
-      sudo sh -c 'echo "install btusb /sbin/modprobe --ignore-install btusb" >> "$1"' _ "$BLUE_MOD_FILE"
-      sudo chmod 644 $BLUE_MOD_FILE
+      sh -c 'echo "install bluetooth /sbin/modprobe --ignore-install bluetooth" >> "$1"' _ "$BLUE_MOD_FILE"
+      sh -c 'echo "install btusb /sbin/modprobe --ignore-install btusb" >> "$1"' _ "$BLUE_MOD_FILE"
+      chmod 644 $BLUE_MOD_FILE
      echo "Bluetooth kernel modules enabled. Reboot to take effect."
    fi

 # Toggle GHNS (KDE Get New Stuff)
 toggle-ghns:
-    #!/usr/bin/pkexec /usr/bin/bash
+    #! /bin/run0 /bin/bash
    KDE_GLOBALS_FILE="/etc/xdg/kdeglobals"
    if test -e $KDE_GLOBALS_FILE; then
      if grep -q "ghns=false" "$KDE_GLOBALS_FILE"; then
@@ -55,24 +55,24 @@ toggle-ghns:

 # enable a kernel module that is disabled by modprobe.d (requires restart)
 override-enable-module mod_name:
-    #!/usr/bin/pkexec /usr/bin/bash
+    #! /bin/run0 /bin/bash
    MOD_NAME="{{ mod_name }}"
    MOD_FILE="/etc/modprobe.d/99-$MOD_NAME.conf"
    if test -e $MOD_FILE; then
      echo "$MOD_NAME module is already enabled."
    else
-      sudo sh -c 'echo "install $1 /sbin/modprobe --ignore-install $1" >> "$2"' _ "$MOD_NAME" "$MOD_FILE" 
-      sudo chmod 644 $MOD_FILE
+      sh -c 'echo "install $1 /sbin/modprobe --ignore-install $1" >> "$2"' _ "$MOD_NAME" "$MOD_FILE" 
+      chmod 644 $MOD_FILE
      echo "Override created to enable $MOD_NAME module. Reboot to take effect."
    fi

 # reset the override by `just override-enable-module`, i.e. disable the module again (requires restart)
 override-reset-module mod_name:
-    #!/usr/bin/pkexec /usr/bin/bash
+    #! /bin/run0 /bin/bash
    MOD_NAME="{{ mod_name }}"
    MOD_FILE="/etc/modprobe.d/99-$MOD_NAME.conf"
    if test -e $MOD_FILE; then
-      sudo rm -f $MOD_FILE
+      rm -f $MOD_FILE
      echo "The override for $MOD_NAME module has been reset. Reboot to take effect."
    else
      echo "No override found for $MOD_NAME module."
@@ -80,7 +80,7 @@ override-reset-module mod_name:

 # Toggle anticheat support by changing ptrace scope (requires restart)
 toggle-anticheat-support:
-    #!/usr/bin/pkexec /usr/bin/bash
+    #! /bin/run0 /bin/bash
    SYSCTL_HARDENING_FILE="/etc/sysctl.d/hardening.conf"
    if grep -q "kernel.yama.ptrace_scope = 3" "$SYSCTL_HARDENING_FILE"; then
        sed -i "s/kernel.yama.ptrace_scope = 3/kernel.yama.ptrace_scope = 1/" "$SYSCTL_HARDENING_FILE"
@@ -94,20 +94,20 @@ toggle-anticheat-support:

 # Toggle Gnome JIT JavaScript for GJS and WebkitGTK (requires session restart)
 toggle-gnome-jit-js:
-    #!/usr/bin/pkexec /usr/bin/bash
+    #! /bin/run0 /bin/bash
    ENV_FILE="/etc/profile.d/gnome-disable-jit.sh"
    if test -e $ENV_FILE; then
-        sudo rm -f $ENV_FILE
+        rm -f $ENV_FILE
        echo "JIT JavaScript for Gnome and WebkitGTK has been enabled."
    else
-        sudo cp /usr$ENV_FILE $ENV_FILE
-        sudo chmod 644 $ENV_FILE
+        cp /usr$ENV_FILE $ENV_FILE
+        chmod 644 $ENV_FILE
        echo "JIT JavaScript for Gnome and WebkitGTK has been disabled."
    fi

 # Toggle support for using GNOME user extensions
 toggle-gnome-extensions:
-    #!/usr/bin/bash
+    #! /bin/run0 /bin/bash
    GSETTING="$(gsettings get org.gnome.shell allow-extension-installation)"
    if [[ "${GSETTING}" == "false" ]]; then
      gsettings set org.gnome.shell allow-extension-installation true
@@ -119,7 +119,7 @@ toggle-gnome-extensions:

 # Toggle Xwayland support
 toggle-xwayland ACTION="prompt":
-    #!/usr/bin/pkexec /usr/bin/bash
+    #! /bin/run0 /bin/bash
    source /usr/lib/ujust/ujust.sh
    OPTION={{ ACTION }}
    if [ "$OPTION" == "prompt" ]; then
@@ -137,31 +137,31 @@ toggle-xwayland ACTION="prompt":
    if [ "$OPTION" == "GNOME" ] || [ "${OPTION,,}" == "gnome" ]; then
      GNOME_XWAYLAND_FILE="/etc/systemd/user/org.gnome.Shell@wayland.service.d/override.conf"
      if test -e $GNOME_XWAYLAND_FILE; then
-        sudo rm -f $GNOME_XWAYLAND_FILE
+        rm -f $GNOME_XWAYLAND_FILE
        echo "Xwayland for GNOME has been enabled."
      else
-        sudo cp /usr$GNOME_XWAYLAND_FILE $GNOME_XWAYLAND_FILE
-        sudo chmod 644 $GNOME_XWAYLAND_FILE
+        cp /usr$GNOME_XWAYLAND_FILE $GNOME_XWAYLAND_FILE
+        chmod 644 $GNOME_XWAYLAND_FILE
        echo "Xwayland for GNOME has been disabled."
      fi
    elif [ "$OPTION" == "KDE Plasma" ] || [ "${OPTION,,}" == "plasma" ]; then
      PLASMA_XWAYLAND_FILE="/etc/systemd/user/plasma-kwin_wayland.service.d/override.conf"
      if test -e $PLASMA_XWAYLAND_FILE; then
-        sudo rm -f $PLASMA_XWAYLAND_FILE
+        rm -f $PLASMA_XWAYLAND_FILE
        echo "Xwayland for KDE Plasma has been enabled."
      else
-        sudo cp /usr$PLASMA_XWAYLAND_FILE $PLASMA_XWAYLAND_FILE
-        sudo chmod 644 $PLASMA_XWAYLAND_FILE
+        cp /usr$PLASMA_XWAYLAND_FILE $PLASMA_XWAYLAND_FILE
+        chmod 644 $PLASMA_XWAYLAND_FILE
        echo "Xwayland for KDE Plasma has been disabled."
      fi
    elif [ "$OPTION" == "Sway" ] || [ "${OPTION,,}" == "sway" ]; then
      SWAY_XWAYLAND_FILE="/etc/sway/config.d/99-noxwayland.conf"
      if test -e $SWAY_XWAYLAND_FILE; then
-        sudo rm -f $SWAY_XWAYLAND_FILE
+        rm -f $SWAY_XWAYLAND_FILE
        echo "Xwayland for Sway has been enabled."
      else
-        sudo cp /usr$SWAY_XWAYLAND_FILE $SWAY_XWAYLAND_FILE
-        sudo chmod 644 $SWAY_XWAYLAND_FILE
+        cp /usr$SWAY_XWAYLAND_FILE $SWAY_XWAYLAND_FILE
+        chmod 644 $SWAY_XWAYLAND_FILE
        echo "Xwayland for Sway has been disabled."
      fi
    fi
@@ -179,7 +179,7 @@ toggle-bash-environment-lockdown:
      if lsattr "${BASH_ENV_FILES[0]}" 2>/dev/null | awk '{print $1}' | grep -q 'i'; then
        echo "Bash environment '(${BASH_ENV_FILES[@]})' is locked down. Unlocking it."
        for file in "${BASH_ENV_FILES[@]}"; do
-            pkexec chattr -i "$file"
+            run0 chattr -i "$file"
        done
      else
        echo "Bash environment '(${BASH_ENV_FILES[@]})' is unlocked. Locking it."
@@ -215,7 +215,7 @@ toggle-bash-environment-lockdown:
        " > ~/.bash_profile

        for file in "${BASH_ENV_FILES[@]}"; do
-            pkexec chattr +i "$file"
+            run0 chattr +i "$file"
        done
      fi
    else
--- a/files/justfiles/utilities.just
+++ b/files/justfiles/utilities.just
@@ -25,26 +25,28 @@ bios:

 # Show all messages from this boot
 logs-this-boot:
-    sudo journalctl -b 0
+    #! /bin/run0 /bin/bash
+    journalctl -b 0

 # Show all messages from last boot
 logs-last-boot:
-    sudo journalctl -b -1
+    #! /bin/run0 /bin/bash
+    journalctl -b -1

 # Regenerate GRUB config, useful in dual-boot scenarios where a second operating system isn't listed
 regenerate-grub:
-    #!/usr/bin/bash
+    #! /bin/run0 /bin/bash
    if [ -d /sys/firmware/efi ]; then
-      sudo grub2-mkconfig -o /etc/grub2-efi.cfg
+      grub2-mkconfig -o /etc/grub2-efi.cfg
    else
-      sudo grub2-mkconfig -o /etc/grub2.cfg
+      grub2-mkconfig -o /etc/grub2.cfg
    fi

 # Enroll Nvidia driver & KMOD signing key for secure boot - Enter password "universalblue" if prompted
 enroll-secure-boot-key:
-    sudo mokutil --timeout -1
+    run0 mokutil --timeout -1
    echo 'The next line will prompt for a MOK password. Then, input "universalblue"'
-    sudo mokutil --import /etc/pki/akmods/certs/akmods-ublue.der
+    run0 mokutil --import /etc/pki/akmods/certs/akmods-ublue.der
    echo 'At next reboot, the mokutil UEFI menu UI will be displayed (*QWERTY* keyboard input and navigation).\nThen, select "Enroll MOK", and input "universalblue" as the password'

 # Toggle display of the user-motd in terminal
--- a/files/scripts/removesuid.sh
+++ b/files/scripts/removesuid.sh
@@ -6,36 +6,17 @@ set -oue pipefail
 # Reference: https://gist.github.com/ok-ryoko/1ff42a805d496cb1ca22e5cdf6ddefb0#usrbinchage

 whitelist=(
-    # Needed for flatpak on no-userns images
-    "/usr/bin/bwrap"
-    # Requires cap_setuid if the suid bit is removed
-    "/usr/bin/gpasswd"
-    # "In effect, when the SUID bit is unset on /usr/bin/mount, mount(8) will never drop permissions. If /usr/bin/mount were to have a"
-    # "nonempty permitted capability set and its effective capability bit were set, then mount(8) would never have its effective " 
-    # "capability set cleared during execution, potentially allowing unprivileged users to perform actions they shouldn’t be able to perform"
-    # https://gist.github.com/ok-ryoko/1ff42a805d496cb1ca22e5cdf6ddefb0#can-we-replace-the-suid-bit-with-zero-or-more-file-capabilities-4
-    "/usr/bin/mount"
-    # Required for nvidia images
-    "/usr/bin/nvidia-modprobe"
-    # https://gist.github.com/ok-ryoko/1ff42a805d496cb1ca22e5cdf6ddefb0#can-we-replace-the-suid-bit-with-zero-or-more-file-capabilities
-    "/usr/bin/passwd"
-    # https://gist.github.com/ok-ryoko/1ff42a805d496cb1ca22e5cdf6ddefb0#why-does-this-binary-need-to-be-suid-root-9
-    "/usr/bin/pkexec"
-    # https://gist.github.com/ok-ryoko/1ff42a805d496cb1ca22e5cdf6ddefb0#can-we-replace-the-suid-bit-with-zero-or-more-file-capabilities-6
-    "/usr/bin/su"
-    # https://gist.github.com/ok-ryoko/1ff42a805d496cb1ca22e5cdf6ddefb0#can-we-replace-the-suid-bit-with-zero-or-more-file-capabilities-6
-    "/usr/bin/sudo"
-    # See /usr/bin/mount
-    "/usr/bin/umount"
    # https://gitlab.freedesktop.org/polkit/polkit/-/issues/168
    "/usr/lib/polkit-1/polkit-agent-helper-1"
-    # https://github.com/secureblue/secureblue/issues/119
-    "/usr/lib64/libhardened_malloc-light.so"
-    "/usr/lib64/libhardened_malloc-pkey.so"
-    "/usr/lib64/libhardened_malloc.so"
+    # Needed for flatpak on no-userns images
+    "/usr/bin/bwrap"
    # Required for chrome suid sandbox on no-userns images
    "/usr/lib64/chromium-browser/chrome-sandbox"
    # https://github.com/secureblue/secureblue/issues/119
+    # Required for hardened_malloc to be used by suid-root processes
+    "/usr/lib64/libhardened_malloc-light.so"
+    "/usr/lib64/libhardened_malloc-pkey.so"
+    "/usr/lib64/libhardened_malloc.so"
    "/usr/lib64/glibc-hwcaps/x86-64/libhardened_malloc-light.so"
    "/usr/lib64/glibc-hwcaps/x86-64/libhardened_malloc-pkey.so"
    "/usr/lib64/glibc-hwcaps/x86-64/libhardened_malloc.so"
@@ -48,8 +29,6 @@ whitelist=(
    "/usr/lib64/glibc-hwcaps/x86-64-v4/libhardened_malloc-light.so"
    "/usr/lib64/glibc-hwcaps/x86-64-v4/libhardened_malloc-pkey.so"
    "/usr/lib64/glibc-hwcaps/x86-64-v4/libhardened_malloc.so"
-    # Requires cap_setgid,cap_setuid if the SUID bit is removed
-    "/usr/sbin/grub2-set-bootflag"
 )


@@ -81,4 +60,10 @@ find /usr -type f -perm /2000 |
        fi
    done

+
+rm -f /usr/bin/chsh
+rm -f /usr/bin/pkexec
+rm -f /usr/bin/sudo
+rm -f /usr/bin/su
+
 systemctl enable setcapsforunsuidbinaries.service
--- a/files/scripts/unprotectsudo.sh
+++ b/files/scripts/unprotectsudo.sh
@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+
+# Tell build process to exit if there are any errors.
+set -oue pipefail
+
+rm -f /etc/dnf/protected.d/sudo.conf
--- a/recipes/common/common-modules.yml
+++ b/recipes/common/common-modules.yml
@@ -5,6 +5,7 @@ modules:
    - type: script
      scripts:
        - installrpmfusion.sh
+        - unprotectsudo.sh
    - from-file: common/common-packages.yml
    - type: files
      files:
--- a/recipes/common/common-scripts.yml
+++ b/recipes/common/common-scripts.yml
@@ -5,7 +5,6 @@ scripts:
  - disablesealertpopups.sh
  - httpsmirrors.sh
  - createmissingdirectories.sh
-  - removesuid.sh
  - disablegeoclue.sh
  - enablesecurebluefirstrun.sh
  - createjustcompletions.sh
--- a/recipes/common/desktop-packages.yml
+++ b/recipes/common/desktop-packages.yml
@@ -34,6 +34,9 @@ remove:
  - open-vm-tools-desktop
  - virtualbox-guest-additions
  - passim
+  - sudo
+  - sudo-python-plugin
+



--- a/recipes/common/final-modules.yml
+++ b/recipes/common/final-modules.yml
@@ -2,4 +2,5 @@ modules:
    - type: script
      scripts:
        - removeunusedrepos.sh
+        - removesuid.sh
        - regenerateinitramfs.sh
--- a/recipes/common/server-modules.yml
+++ b/recipes/common/server-modules.yml
@@ -16,6 +16,8 @@ modules:
        - usbguard
        - firewalld
        - policycoreutils-python-utils
+      remove:
+        - sudo
        
    - type: files
      files:
@@ -28,3 +30,4 @@ modules:
      scripts:
        - excludepcsc.sh
        - setserverdefaultzone.sh
+        - removesuid.sh