* refactor code focused on DevTLS mode into new function
* add tests for configureDevTLS function
* replace testcase comments with fields in testcase struct
Note the three overlapping scenarios discussed in the comments. In the
future, when this interface is more broadly supported, we should likely
add the interface directly to SystemView and implement it over the GRPC
interface, removing this nasty layering of already complex SystemView
implementations.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* VAULT-15546 First pass at Vault Proxy docs
* VAULT-15546 correct errors
* VAULT-15546 fully qualify paths
* VAULT-15546 remove index
* VAULT-15546 Some typos and clean up
* VAULT-15546 fix link
* VAULT-15546 Add redirects so old links stay working
* VAULT-15546 more explicit redirects
* VAULT-15546 typo fixes
* Suggestions for Vault Agent & Vault Proxy docs (#20612)
* Rename 'agentandproxy' to 'agent-and-proxy' for better URL
* Update the index pages for each section
* VAULT-15546 fix link typo
---------
Co-authored-by: Yoko Hyakuna <yoko@hashicorp.com>
* Fix tidy with maintain_stored_certificate_counts == publish_stored_certificate_count_metrics == false
The logic around the check to set both to false was wrong, and should
be validated independently.
Additionally, these fields should only exist on auto-tidy and not on the
manual tidy endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update builtin/logical/pki/path_tidy.go
Co-authored-by: claire bontempo <68122737+hellobontempo@users.noreply.github.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: claire bontempo <68122737+hellobontempo@users.noreply.github.com>
* Respond with cache size on config write
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Respond with key policy on write
This includes creating a key, but also trimming or rotating an
existing key.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly handle locking around policy formatting
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate that responses are non-empty
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* pki: add subject key identifier to read key response
This will be helpful for the Terraform Vault Provider to detect
migration of pre-1.11 exported keys (from CA generation) into post-1.11
Vault.
* add changelog
* Update builtin/logical/pki/path_fetch_keys.go
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* check for managed key first
* Validate the SKID matches on root CAs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate SKID matches on int CAs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix formatting of tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Do not set use_csr_values when issuing ACME certs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure CSRs with Basic Constraints are rejected
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test to ensure CA certificates cannot be issued
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update builtin/logical/pkiext/pkiext_binary/acme_test.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Update builtin/logical/pkiext/pkiext_binary/acme_test.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Update acme_test.go to include certutil
* Update acme_test.go - unused imports, reformat
* Update acme_test.go - hex really was used
This is why I can't use the GH web editor. :-)
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* including path parameters into stub Paths for enterprise-only endpoints
* Set Required to true for path parameters in enterprise-only path stubs
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
* properly format go code
* re-adding initialization of Fields and Operations fields in the stubbed Path struct
---------
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
* change testing password policy to be deterministic
* fix panic
* test password against rules
* improve error message
* make test password gen more random
* fix check on test password length
* Add stub ACME billing interfaces
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add initial implementation of client count
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly attribute to mount, namespace
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor adding entities of custom types
This begins to add custom types of events; presently these are counted
as non-entity tokens, but prefixed with a custom ClientID prefix.
In the future, this will be the basis for counting these events
separately (into separate buckets and separate storage segments).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor creation of ACME mounts
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test case for billing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Better support managed key system view casting
Without an additional parameter, SystemView could be of a different
internal implementation type that cannot be directly casted to in OSS.
Use a separate parameter for the managed key system view to use instead.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor creation of mounts for enterprise
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate mounts in ACME billing tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use a hopefully unique separator for encoded identifiers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use mount accesor, not path
Co-authored-by: miagilepner <mia.epner@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename AddEventToFragment->AddActivityToFragment
Co-authored-by: Mike Palmiotto <mike.palmiotto@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: miagilepner <mia.epner@hashicorp.com>
Co-authored-by: Mike Palmiotto <mike.palmiotto@hashicorp.com>
* VAULT-15547 First pass at agent/proxy decoupling
* VAULT-15547 Fix some imports
* VAULT-15547 cases instead of string.Title
* VAULT-15547 changelog
* VAULT-15547 Fix some imports
* VAULT-15547 some more dependency updates
* VAULT-15547 More dependency paths
* VAULT-15547 godocs for tests
* VAULT-15547 godocs for tests
* VAULT-15547 test package updates
* VAULT-15547 test packages
* VAULT-15547 add proxy to test packages
* VAULT-15547 gitignore
* VAULT-15547 address comments
* VAULT-15547 Some typos and small fixes
* core/server: add support to write pprof files to the filesystem via SIGUSR2
* changelog
* Fix filepath join
* Use core logger
* Simplify logic
* Break on error
Determine the allocation pool size for the spot fleet by the allocation
strategy. This allows us to ensure a consistent attribute plan during
re-runs which avoid rebuilding the target fleets.
Signed-off-by: Ryan Cragun <me@ryan.ec>
* Disable requiring EAB in ACME by default
- After an internal meeting it was decided that enabling EAB support by default was probably not the right decision.
- The main motivating factor being ease of use by end-users as the majority of implementations aren't expecting EAB to be required by default.
* Leverage function isPublicACMEDisabledByEnv and log parsing error
- Add logging to the new isPublicACMEDisabledByEnv function if we fail to parse the env var
- Leverage the function within the isAcmeDisabled function in acme_wrappers.go to not duplicate the env getting logic in two places.
* Fail closed when VAULT_DISABLE_PUBLIC_ACME is un-parsable.
* Add a last issued date on ACME accounts
- When we issue a new ACME certificate, attempt to update the account's last issued field
- Within ACME account tidy, use both account creation and last issue date to provide a buffer before we mark the account as revoked.
- Cleanup the cert serial to account tracker
- Misc formatting fixes in JSON objects
* Move account max-cert-expiry updates within tidy
- Perform the account update of max-cert-expiry within
the tidy operation as it has the account write lock
and is already iterating over all orders.
- With this the order path does not need any account
level locks
* Prefix ACME account status constants with AccountStatusX
* Add Vault APIS to create, list, delete ACME EAB keys
- Add Vault authenticated APIs to create, list and delete ACME
EAB keys.
- Add supporting tests for all new apis
* Add require_eab to acme configuration
* Add EAB support to ACME
* Add EAB support to ACME
* PR feedback 1
- Address missing err return within DeleteEab
- Move verifyEabPayload to acme_jws.go no code changes in this PR
- Update error message returned for error on account storage with EAB.
* PR feedback 2
- Verify JWK signature payload after signature verification
* Introduce an ACME eab_policy in configuration
- Instead of a boolean on/off for require_eab, introduce named policies for ACME behaviour enforcing eab.
- The default policy of always-required, will force new accounts to have an EAB, and all operations in the future, will make sure the account has an EAB associated with it.
- Two other policies, not-required will allow any anonymous users to use ACME within PKI and 'new-account-required' will enforce new accounts going forward to require an EAB, but existing accounts will still be allowed to use ACME if they don't have an EAB associated with the account.
- Having 'always-required' as a policy, will override the environment variable to disable public acme as well.
* Add missing go-docs to new tests.
* Add valid eab_policy values in error message.
* initial WIP glimmerize the controller
* wip got the filter engine type by supported backends working
* got filter by engine type working
* wip need to refactor but working ish for name
* wip working state with both filters, does not work if both fiters are set
* fixed when you have two selected filters, but broken for multiples of the same type with different names
* remove repeated engineTypes in filter list
* add disabled to power select
* fix bug of glimmer for the concurrency task.
* wording fix
* remove linkableItem and the nested contextual compnents to help with loading speed.
* add changelog
* fix some tests
* add test coverage
* Update 20481.txt
update changelog text
* test fixes 🤞
* test fix?
* address a pr comment and save
* address pr comment
