* logic
* actually got test working
* heartbeat health test
* fix healthy definition and add changelog
* fix test condition
* actually fix test condition
* Update vault/testing.go
Co-authored-by: Kuba Wieczorek <kuba.wieczorek@hashicorp.com>
* close body
---------
Co-authored-by: Kuba Wieczorek <kuba.wieczorek@hashicorp.com>
* initial implementation of unseal trace
* close file if we fail to start the trace
didn't bother to check the error from traceFile.Close()
* use reloadable config instead of env var
* license
* remove leftover
* allow setting custom dir and remove new package
* bring back StartDebugTrace
after talking to Kuba it sounds like it's a good idea to try to move stuff out of core, so even if there's no immediate need for a generic debug trace function it's still fair to add it
* track postUnseal instead of unsealInternal
also some usability improvements from manual testing
* address PR comments
* address security review
there were concerns about using the /tmp directory because of permissions, or having a default dir at all, so now it's required to set a dir in order to generate the traces.
* add unit tests to StartDebugTrace
* move back to default dir
* document new parameters
* add tiny integration test
* avoid column in trace filename
sounds like it might be forbidden in Windows and possibly cause problems in some MacOS applications.
* address PR feedback
* add go doc to test
CI was complaining about missing comments on the new test function. It feels a bit silly to require this of tests but whatever XD
* fix tests
This PR introduces the CE plumbing for a new high WritePriority, meant
to bypass rejection from the AOP write controller. We attach this
priority to any request on a sudo path, such that administrators can
still perform necessary operations during an overload.
This PR introduces the CE plumbing for a new HTTP header, called
X-Vault-AOP-Force-Reject, which will force any associated request to
reject storage writes as if Vault were overloaded.
This flag is intended to test end-to-end functionality of write
rejection in Vault. This is specifically useful for testing 503 -
Service Unavailable HTTP response codes during load shedding.
* Add support for x_forwarded_for_client_cert_header
* add changelog entry
* add tests for a badly and properly formatted certs
* both conditions should be true
* handle case where r.TLS is nil
* prepend client_certs to PeerCertificates list
* Add support for x_forwarded_for_client_cert_header
* add changelog entry
* add tests for a badly and properly formatted certs
* both conditions should be true
* handle case where r.TLS is nil
* prepend client_certs to PeerCertificates list
* add option for decoders to handle different proxies
* Add support for x_forwarded_for_client_cert_header
* add changelog entry
* add tests for a badly and properly formatted certs
* both conditions should be true
* handle case where r.TLS is nil
* prepend client_certs to PeerCertificates list
* add option for decoders to handle different proxies
* fix tests
* fix typo
---------
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Scott Miller <smiller@hashicorp.com>
Co-authored-by: Violet Hynes <violet.hynes@hashicorp.com>
* fix VAULT-24372
* use redaction settings in context to redact values in sys/leader
* add tests to check redaction in GetLeaderStatus and GetSealStatus
* add ENT badge to sys/config/ui/custom-messages api-docs page in ToC
* remove unrelated change to website ToC
This removes the WebSockets endpoint for events
(which will be moved to the Enterprise repo) and
disables tests that rely on it unless they are
running in Enterprise.
It also updates documentation to document that
events are only available in Vault Enterprise.
* add gosimport to make fmt and run it
* move installation to tools.sh
* correct weird spacing issue
* Update Makefile
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* fix a weird issue
---------
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
This PR introduces a new testonly endpoint for introspecting the
RequestLimiter state. It makes use of the endpoint to verify that changes to
the request_limiter config are honored across reload.
In the future, we may choose to make the sys/internal/request-limiter/status
endpoint available in normal binaries, but this is an expedient way to expose
the status for testing without having to rush the design.
In order to re-use as much of the existing command package utility funcionality
as possible without introducing sprawling code changes, I introduced a new
server_util.go and exported some fields via accessors.
The tests shook out a couple of bugs (including a deadlock and lack of
locking around the core limiterRegistry state).
This commit introduces two new adaptive concurrency limiters in Vault,
which should handle overloading of the server during periods of
untenable request rate. The limiter adjusts the number of allowable
in-flight requests based on latency measurements performed across the
request duration. This approach allows us to reject entire requests
prior to doing any work and prevents clients from exceeding server
capacity.
The limiters intentionally target two separate vectors that have been
proven to lead to server over-utilization.
- Back pressure from the storage backend, resulting in bufferbloat in
the WAL system. (enterprise)
- Back pressure from CPU over-utilization via PKI issue requests
(specifically for RSA keys), resulting in failed heartbeats.
Storage constraints can be accounted for by limiting logical requests
according to their http.Method. We only limit requests with write-based
methods, since these will result in storage Puts and exhibit the
aforementioned bufferbloat.
CPU constraints are accounted for using the same underlying library and
technique; however, they require special treatment. The maximum number
of concurrent pki/issue requests found in testing (again, specifically
for RSA keys) is far lower than the minimum tolerable write request
rate. Without separate limiting, we would artificially impose limits on
tolerable request rates for non-PKI requests. To specifically target PKI
issue requests, we add a new PathsSpecial field, called limited,
allowing backends to specify a list of paths which should get
special-case request limiting.
For the sake of code cleanliness and future extensibility, we introduce
the concept of a LimiterRegistry. The registry proposed in this PR has
two entries, corresponding with the two vectors above. Each Limiter
entry has its own corresponding maximum and minimum concurrency,
allowing them to react to latency deviation independently and handle
high volumes of requests to targeted bottlenecks (CPU and storage).
In both cases, utilization will be effectively throttled before Vault
reaches any degraded state. The resulting 503 - Service Unavailable is a
retryable HTTP response code, which can be handled to gracefully retry
and eventually succeed. Clients should handle this by retrying with
jitter and exponential backoff. This is done within Vault's API, using
the go-retryablehttp library.
Limiter testing was performed via benchmarks of mixed workloads and
across a deployment of agent pods with great success.
* Re-process .well-known redirects with a recursive handler call rather than a 302 redirect
* Track when the RequestURI mismatches path (in a redirect) and add it to the audit log
* call cancelFunc
* Work towards removing the feature flag that disabled eventlogger for audit events
* Removed audited headers from LogRequest and LogResponse and clean up
* make clear we don't use a method param, and comment tweak
* Moved BenchmarkAuditFile_request to audit_broker_test and renamed. Clean up
* fixed calls from tests to Factory's
* waffling godoc for a ported and tweaked test
* Remove duplicate code from previous merges, remove uneeded code
* Refactor file audit backend tests
---------
Co-authored-by: Kuba Wieczorek <kuba.wieczorek@hashicorp.com>
* Support reloading database plugins across multiple mounts
* Add clarifying comment to MountEntry.Path field
* Tests: Replace non-parallelisable t.Setenv with plugin env settings
* VAULT-22481: Audit filter node (#24465)
* Initial commit on adding filter nodes for audit
* tests for audit filter
* test: longer filter - more conditions
* copywrite headers
* Check interface for the right type
* Add audit filtering feature (#24554)
* Support filter nodes in backend factories and add some tests
* More tests and cleanup
* Attempt to move control of registration for nodes and pipelines to the audit broker (#24505)
* invert control of the pipelines/nodes to the audit broker vs. within each backend
* update noop audit test code to implement the pipeliner interface
* noop mount path has trailing slash
* attempting to make NoopAudit more friendly
* NoopAudit uses known salt
* Refactor audit.ProcessManual to support filter nodes
* HasFiltering
* rename the pipeliner
* use exported AuditEvent in Filter
* Add tests for registering and deregistering backends on the audit broker
* Add missing licence header to one file, fix a typo in two tests
---------
Co-authored-by: Peter Wilson <peter.wilson@hashicorp.com>
* Add changelog file
* update bexpr datum to use a strong type
* go docs updates
* test path
* PR review comments
* handle scenarios/outcomes from broker.send
* don't need to re-check the complete sinks
* add extra check to deregister to ensure that re-registering non-filtered device sets sink threshold
* Ensure that the multierror is appended before attempting to return it
---------
Co-authored-by: Peter Wilson <peter.wilson@hashicorp.com>
* Export audit event
* Move older tests away from audit behavior that didn't use eventlogger
* spelling--;
* no more struct initialization of NoopAudit outside of NewNoopAudit
* locking since we're accessing the shared backend
* Refactor plugin catalog into its own package
* Fix some unnecessarily slow tests due to accidentally running multiple plugin processes
* Clean up MakeTestPluginDir helper
* Move getBackendVersion tests to plugin catalog package
* Use corehelpers.MakeTestPlugin consistently
* Fix semgrep failure: check for nil value from logical.Storage
* Re-implementation of API redirects with more deterministic matching
* add missing file
* Handle query params properly
* licensing
* Add single src deregister
* Implement specifically RFC 5785 (.well-known) redirects.
Also implement a unit test for HA setups, making sure the standby node redirects to the active (as usual), and that then the active redirects the .well-known request to a backend, and that that is subsequently satisfied.
* Remove test code
* Rename well known redirect logic
* comments/cleanup
* PR feedback
* Remove wip typo
* Update http/handler.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Fix registrations with trailing slashes
---------
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* wip
* more pruning
* Integrate OCSP into binary paths PoC
- Simplify some of the changes to the router
- Remove the binary test PKI endpoint
- Switch OCSP to use the new binary paths backend variable
* Fix proto generation and test compilation
* Add unit test for binary request handling
---------
Co-authored-by: Scott G. Miller <smiller@hashicorp.com>
* Update the default kv mount to kv.Factory
* Imports
* Set some tests that care about leaseapssthroughbackend to use it
* extra newline
* More test updates
* Test updates
* Refactor KV mounting in tests
* Re-add comment
