mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-10-29 17:42:41 +00:00
ipq807x: include support for dual-image in YunCore AX840
This adds support for dual-image ('rootfs' partitions rotation), for
the YunCore AX840 board. Implementation details are included in the
'base-files' patch this commit adds:
0060-base-files-minimal-support-for-QCA-runtime-failsafe.patch
Fixes: WIFI-12537
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz
committed by
John Crispin
John Crispin
parent
b89ba787fe
commit
08e976af26
@@ -160,7 +160,6 @@ platform_do_upgrade() {
|
||||
qcom,ipq5018-mp03.3|\
|
||||
wallys,dr6018|\
|
||||
wallys,dr6018-v4|\
|
||||
yuncore,ax840|\
|
||||
yuncore,fap650|\
|
||||
tplink,ex447|\
|
||||
tplink,ex227|\
|
||||
@@ -212,5 +211,12 @@ platform_do_upgrade() {
|
||||
PART_NAME="inactive"
|
||||
platform_do_upgrade_dualboot_datachk "$1"
|
||||
;;
|
||||
yuncore,ax840)
|
||||
[ -f /proc/boot_info/rootfs/upgradepartition ] && {
|
||||
CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
|
||||
CI_BOOTCFG=1
|
||||
}
|
||||
nand_upgrade_tar "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
@@ -63,6 +63,9 @@ boot() {
|
||||
PART_NAME=rootfs_1
|
||||
fi
|
||||
;;
|
||||
yuncore,ax840)
|
||||
PART_NAME=rootfs_1
|
||||
;;
|
||||
*)
|
||||
return 1
|
||||
;;
|
||||
|
||||
@@ -0,0 +1,116 @@
|
||||
From 793e3c02cd7ce6392913031b1f546923d4277f50 Mon Sep 17 00:00:00 2001
|
||||
From: Piotr Dymacz <pepe2k@gmail.com>
|
||||
Date: Sun, 6 Nov 2022 10:22:42 +0100
|
||||
Subject: [PATCH] base-files: minimal support for QCA runtime failsafe upgrade
|
||||
|
||||
During research, when working on support for YunCore AX840 board it was
|
||||
found that this vendor decided to use Qualcomm-made, so called 'runtime
|
||||
failsafe' based upgrades from QSDK (see e.g. [1] and [2]).
|
||||
|
||||
It turned out that vendor firmware makes use of dual-image feature
|
||||
controlled by SBL (not only by U-Boot as usual). This mode allows to
|
||||
switch between two copies of firmware in case of a failed upgrade and
|
||||
works not only with kernel/rootfs but apparently, also with other parts
|
||||
of the firmware, like APPS (U-Boot), Wi-Fi (ath11k) firmware, etc.
|
||||
Here, we will focus only on the firmware (in our case, UBI on NAND).
|
||||
|
||||
Two, equal in size, UBI partitions are used: the 'rootfs' is always the
|
||||
active one (for booting) and 'rootfs_1' is used for storing new firmware
|
||||
during the regular 'sysupgrade'. Partition names are swapped, probably
|
||||
by the 'SBL' (closed-source, second level bootloader), based on layout
|
||||
in 'MIBIB' and content of 'BOOTCONFIG'/'BOOTCONFIG1' partitions (the
|
||||
second one seems to be only a backup, as mentioned in related kernel
|
||||
driver) and then provided by 'SMEM' to U-Boot and kernel. For example:
|
||||
|
||||
- when primary 'rootfs' partition is #0:
|
||||
0x000000000000-0x000003c00000 : "rootfs" (used for booting)
|
||||
0x000003c00000-0x000007800000 : "rootfs_1"
|
||||
|
||||
- when primary 'rootfs' partition is #1:
|
||||
0x000000000000-0x000003c00000 : "rootfs_1"
|
||||
0x000003c00000-0x000007800000 : "rootfs" (used for booting)
|
||||
|
||||
The whole solution requires support in several other places, including
|
||||
kernel (detecting crash) and U-Boot (partition swap) but this requires
|
||||
more research and apparently, YunCore doesn't even use all of that in a
|
||||
proper way, resulting only in a rotation of firmware partitions during
|
||||
upgrade (without the part responsible for reverting in case of fail
|
||||
during the upgrade).
|
||||
|
||||
This patch adds only a small part of the solution, making 'dual-image'
|
||||
feature kind of working, resulting in rotation between 'rootfs' and
|
||||
'rootfs_1' partitions (areas on NAND) between subsequent updates. This
|
||||
requires also 'CONFIG_BOOTCONFIG_PARTITION' support in the kernel and
|
||||
in simple terms, works as follows:
|
||||
|
||||
1. Get name of target 'rootfs' partition for upgrade from:
|
||||
'/proc/boot_info/rootfs/upgradepartition'
|
||||
|
||||
2. Perform upgrade and in case of success change 'primaryboot' flag
|
||||
(1 -> 0, 0 -> 1) for 'rootfs' partition in 'BOOTCONFIG'
|
||||
|
||||
3. Write back updated 'BOOTCONFIG' content to flash:
|
||||
from '/proc/boot_info/getbinary_bootconfig' to mtd partitions
|
||||
('0:BOOTCONFIG' and '0:BOOTCONFIG1')
|
||||
|
||||
This topic definitely requires additional research if a proper solution
|
||||
(kernel crash and/or failed upgrade detection) is needed so more changes
|
||||
might come in future.
|
||||
|
||||
[1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/commit/67225a559ca8e61e87c36a1c9940a085b3950c97
|
||||
[2] https://git.codelinaro.org/clo/qsdk/oss/system/openwrt_repo/-/blob/NHSS.QSDK.12.1.5.r2/target/linux/ipq60xx/base-files/lib/upgrade/platform.sh#L175
|
||||
|
||||
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
||||
---
|
||||
package/base-files/files/lib/upgrade/nand.sh | 25 ++++++++++++++++++++
|
||||
1 file changed, 25 insertions(+)
|
||||
|
||||
diff --git a/package/base-files/files/lib/upgrade/nand.sh b/package/base-files/files/lib/upgrade/nand.sh
|
||||
index ab3db4cdf2..349d287841 100644
|
||||
--- a/package/base-files/files/lib/upgrade/nand.sh
|
||||
+++ b/package/base-files/files/lib/upgrade/nand.sh
|
||||
@@ -15,6 +15,9 @@ CI_ROOTPART="${CI_ROOTPART:-rootfs}"
|
||||
# ipq807x qsdk kernel misbehaves
|
||||
CI_IPQ807X=0
|
||||
|
||||
+# update BOOTCONFIG partitions (rotate rootfs/rootfs_1)
|
||||
+CI_BOOTCFG=0
|
||||
+
|
||||
ubi_mknod() {
|
||||
local dir="$1"
|
||||
local dev="/dev/$(basename $dir)"
|
||||
@@ -216,9 +219,31 @@ nand_upgrade_prepare_ubi() {
|
||||
return 0
|
||||
}
|
||||
|
||||
+nand_qca_update_bootconfig() {
|
||||
+ local primary="0"
|
||||
+ local mtdnum
|
||||
+ local part
|
||||
+
|
||||
+ [ -f /proc/boot_info/rootfs/primaryboot ] || return
|
||||
+ [ -f /proc/boot_info/getbinary_bootconfig ] || return
|
||||
+
|
||||
+ [ "$(cat /proc/boot_info/rootfs/primaryboot)" = "0" ] && primary="1"
|
||||
+ echo "$primary" > /proc/boot_info/rootfs/primaryboot 2>/dev/null
|
||||
+
|
||||
+ for part in "0:BOOTCONFIG" "0:BOOTCONFIG1"; do
|
||||
+ mtdnum="$(find_mtd_index "$part")"
|
||||
+ [ -c "/dev/mtd${mtdnum}" ] && {
|
||||
+ mtd -qq write /proc/boot_info/getbinary_bootconfig \
|
||||
+ "/dev/mtd${mtdnum}" 2>/dev/null &&\
|
||||
+ echo "partition '$part' updated"
|
||||
+ }
|
||||
+ done
|
||||
+}
|
||||
+
|
||||
nand_do_upgrade_success() {
|
||||
local conf_tar="/tmp/sysupgrade.tgz"
|
||||
sync
|
||||
+ [ "$CI_BOOTCFG" = 1 ] && nand_qca_update_bootconfig
|
||||
[ -f "$conf_tar" ] && nand_restore_config "$conf_tar"
|
||||
echo "sysupgrade successful"
|
||||
umount -a
|
||||
--
|
||||
2.38.1
|
||||
|
||||
Reference in New Issue
Block a user