ipq807x: add cybertan eww622-a1

Fixes: WIFI-7054
Signed-off-by: John Crispin <john@phrozen.org>

.github/workflows/build-dev.yml

@@ -11,7 +11,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: ['cig_wf188n', 'cig_wf194c', 'cig_wf194c4', 'cig_wf160d', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'indio_um-305ac', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'tp-link_ec420-g1', 'tplink_ex227', 'tplink_ex228', 'tplink_ex447', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4' ]
+        target: ['cig_wf188n', 'cig_wf194c', 'cig_wf194c4', 'cig_wf160d', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'indio_um-305ac', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'tp-link_ec420-g1', 'tplink_ex227', 'tplink_ex228', 'tplink_ex447', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4' ]
 
     steps:
     - uses: actions/checkout@v2

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -55,6 +55,14 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1 eth2 eth3 eth4"
 		ucidef_set_interface_wan "eth0"
 		;;
+	cybertan,eww622-a1|\
+	qcom,ipq5018-mp03.1)
+		ucidef_set_interface_lan "eth1"
+		ucidef_set_interface_wan "eth0"
+		ucidef_add_switch "switch1"
+		ucidef_add_switch_attr "switch1" "enable" "false"
+		ucidef_add_switch_attr "switch1" "reset" "true"
+		;;
 	esac
 }
 

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -80,9 +80,19 @@ case "$FIRMWARE" in
 		;;
 	esac
 	;;
+ath11k/IPQ5018/hw1.0/caldata.bin)
+	case "$board" in
+	cybertan,eww622-a1|\
+	qcom,ipq5018-mp03.1)
+                caldata_extract "0:ART" 0x1000 0x20000  
+		;;
+	esac
+	;;
 ath11k/QCN9074/hw1.0/caldata_1.bin)
 	case "$board" in
 	cig,wf196|\
+	cybertan,eww622-a1|\
+	qcom,ipq5018-mp03.1|\
 	qcom,ipq807x-hk14)
                 caldata_extract "0:ART" 0x26800 0x20000  
 		;;

feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh

@@ -24,6 +24,7 @@ platform_check_image() {
 	cig,wf188n|\
 	cig,wf194c|\
 	cig,wf194c4|\
+	cybertan,eww622-a1|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
@@ -56,6 +57,7 @@ platform_do_upgrade() {
 	cig,wf188n|\
 	cig,wf194c|\
 	cig,wf194c4|\
+	cybertan,eww622-a1|\
 	hfcl,ion4xi|\
 	hfcl,ion4xe|\
 	qcom,ipq6018-cp01|\

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-eww622-a1.dts

@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-eww622-a1.dts"
+
+/ {
+	model = "CyberTan EWW622-A1";
+	compatible = "cybertan,eww622-a1", "qcom,ipq5018";
+
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-eww622-a1.dts

@@ -0,0 +1,909 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq5018.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.1";
+	compatible = "qcom,ipq5018-mp03.1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	AUTO_MOUNT;
+	#endif
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*            256 MB Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          8MB            |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x40800000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          23MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump| 0x4C700000   |          1MB            |
+	 * +--------+--------------+-------------------------+
+	 * | QDSS   | 0x4C800000   |          1MB            |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4C900000  |          17MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4DA00000  |          16MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01700000>;
+		};
+
+		m3_dump@4c700000 {
+			no-map;
+			reg = <0x0 0x4C700000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		qcn9000_pcie0@4c900000 {
+			no-map;
+			reg = <0x0 0x4C900000 0x0 0x01100000>;
+		};
+
+		mhi_region1: dma_pool1@4da00000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4da00000 0x0 0x01000000>;
+		};
+	#elif __IPQ_MEM_PROFILE_512_MB__
+	/*                      512 MB Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          16MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          24MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4C800000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4C900000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4CA00000  |           2MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4CC00000  |          30MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4EA00000  |          16MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01800000>;
+		};
+
+		m3_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4c900000 {
+			no-map;
+			reg = <0x0 0x4c900000 0x0 0x100000>;
+		};
+
+		q6_caldb_region:q6_caldb_region@4ca00000 {
+			no-map;
+			reg = <0x0 0x4ca00000 0x0 0x200000>;
+		};
+
+		qcn9000_pcie0@4cc00000 {
+			no-map;
+			reg = <0x0 0x4CC00000 0x0 0x01E00000>;
+		};
+
+		mhi_region1: dma_pool1@4ea00000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4ea00000 0x0 0x01000000>;
+		};
+	#else
+	/*                      1G Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          16MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          24MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4C800000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4C900000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4CA00000  |           2MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4CC00000  |          45MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4F900000  |          24MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01800000>;
+		};
+
+		m3_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4c900000 {
+			no-map;
+			reg = <0x0 0x4c900000 0x0 0x100000>;
+		};
+
+		q6_caldb_region:q6_caldb_region@4ca00000 {
+			no-map;
+			reg = <0x0 0x4ca00000 0x0 0x200000>;
+		};
+
+		qcn9000_pcie0@4cc00000 {
+			no-map;
+			reg = <0x0 0x4CC00000 0x0 0x02D00000>;
+		};
+
+		mhi_region1: dma_pool1@4F900000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4F900000 0x0 0x01800000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <2>;
+					mode = "normal";
+					speed = "1000M";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@1 {
+					source = <0>;
+					mode = "normal";
+					speed = "100M";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <0x27>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x3c>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+					port@4 {
+						port_id = <5>;
+						phy_address = <4>;
+					};
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			qcom,bdf-addr = <0x4BA00000 0x4BA00000 0x4BA00000
+						0x0 0x0>;
+			qcom,caldb-addr = <0x4CA00000 0x4CA00000 0x4CA00000
+						0x0 0x0>;
+			qcom,caldb-size = <0x200000>;
+			status = "ok";
+		};
+
+		ess-uniphy@98000 {
+			status = "disabled";
+		};
+
+		qcom,sps {
+			status = "ok";
+		};
+
+		qcom,usbbam@8B04000 {
+			status = "ok";
+		};
+
+		qcom,diag@0 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		rpm_etm0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: blsp0_uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio23", "gpio25", "gpio24", "gpio26";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+				pins = "gpio9";
+				function = "qspi_clk";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_cs {
+				pins = "gpio8";
+				function = "qspi_cs";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_0 {
+				pins = "gpio7";
+				function = "qspi0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_1 {
+				pins = "gpio6";
+				function = "qspi1";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_2 {
+				pins = "gpio5";
+				function = "qspi2";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_3 {
+				pins = "gpio4";
+				function = "qspi3";
+				drive-strength = <8>;
+				bias-disable;
+			};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+                gephy_led_pin_1g {
+                        pins = "gpio30";
+                        function = "led2";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+                gephy_led_pin_100 {
+                        pins = "gpio46";
+                        function = "led0";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		
+		reset_button {
+			pins = "gpio28";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pinmux {
+		sys_blue {
+			pins = "gpio1";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		sys_green {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		sys_red {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	
+		button@2 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@1 {
+			label = "sys:blue";
+			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;  /* GPIO_1 */
+		/*	default-state="on"; */
+			linux,default-trigger = "timer";
+			active-delay = <700>;
+			inactive-delay = <700>;
+			default-state="on";
+		};
+		led@35 {
+			label = "sys:green";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;  /* GPIO_35 */
+			default-state="off";
+		/*	linux,default-trigger = "timer";
+			active-delay = <700>;
+			inactive-delay = <700>;
+			default-state="on";		*/
+		};
+		led@31 {
+			label = "sys:red";
+			gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;  /* GPIO_31 */
+			default-state="off";
+		/*	linux,default-trigger = "timer";
+			active-delay = <700>;
+			inactive-delay = <700>;
+			default-state="on";		*/
+		};
+	};
+};
+
+&usb3 {
+	qcom,multiplexed-phy;
+	qcom,phy-mux-regs = <&tcsr_q6_block 0x2540>;
+	device-power-gpio = <&tlmm 24 1>;
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	status = "disabled";
+	perst-gpio = <&tlmm 18 1>;
+};
+
+&pcie_x2 {
+	status = "ok";
+	perst-gpio = <&tlmm 15 1>;
+};
+
+&bt {
+	status = "ok";
+};
+
+&wcss {
+	status = "ok";
+};
+
+&q6v5_wcss {
+	status = "disabled";
+};
+
+&q6v5_m3 {
+	status = "disabled";
+};
+
+&tcsr_mutex_block {
+	status = "ok";
+};
+
+&tcsr_mutex {
+	status = "ok";
+};
+
+&smem {
+	status = "ok";
+};
+
+&apcs_glb {
+	status = "ok";
+};
+
+&tcsr_q6_block {
+	status = "ok";
+};
+
+&qcom_q6v5_wcss {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_region>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_region>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+	/* IPQ5018 */
+	q6v5_wcss_userpd1 {
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <1>;
+		qca,auto-restart;
+		qca,int_radio;
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&dbm_1p5 {
+	status = "ok";
+};
+
+&msm_imem {
+	status = "ok";
+};
+
+&blsp1_uart1 {
+	status = "ok";
+};
+
+&ssuniphy_0 {
+	status = "ok";
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&pcie_x1phy {
+	status = "disabled";
+};
+
+&pcie_x2phy {
+	status = "ok";
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "ok";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+		qrtr_instance_id = <0x20>;
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		memory-region = <&mhi_region1>;
+#if !defined(__CNSS2__)
+		base-addr = <0x4CC00000>;
+		m3-dump-addr = <0x4E000000>;
+		etr-addr = <0x4E100000>;
+		qcom,caldb-addr = <0x4E200000>;
+		qcom,tgt-mem-mode = <0x1>;
+		mhi,max-channels = <30>;
+		mhi,timeout = <10000>;
+#endif
+	};
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,board_id = <0x24>;
+	status = "ok";
+};
+
+&wifi3 {
+	/* QCN9000 5G */
+	board_id = <0xa0>;
+	status = "ok";
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};

feeds/ipq807x/ipq807x/image/ipq50xx.mk

@@ -1,5 +1,23 @@
 KERNEL_LOADADDR := 0x41208000
 
+define Device/cybertan_eww622_a1
+  DEVICE_TITLE := CyberTan EWW622-A1
+  DEVICE_DTS := qcom-ipq5018-eww622-a1
+  SUPPORTED_DEVICES := cybertan,eww622-a1
+  DEVICE_PACKAGES := ath11k-wifi-cybertan-eww622-a1 ath11k-firmware-ipq50xx ath11k-firmware-qcn9000
+  DEVICE_DTS_CONFIG := config@mp03.1
+endef
+TARGET_DEVICES += cybertan_eww622_a1
+
+define Device/qcom_mp03_1
+  DEVICE_TITLE := Qualcomm Maple 03.1
+  DEVICE_DTS := qcom-ipq5018-mp03.1
+  SUPPORTED_DEVICES := qcom,ipq5018-mp03.1
+  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq5018
+  DEVICE_DTS_CONFIG := config@mp03.1
+endef
+TARGET_DEVICES += qcom_mp03_1
+
 define Device/qcom_mp03_3
   DEVICE_TITLE := Qualcomm Maple 03.3
   DEVICE_DTS := qcom-ipq5018-mp03.3

feeds/ipq807x/ipq807x/ipq50xx/config-default

@@ -82,3 +82,4 @@ CONFIG_RMNET_CTL_DEBUG=y
 CONFIG_SND_SOC_IPQ_LPASS=y
 CONFIG_SND_SOC_IPQ_LPASS_PCM_RAW=y
 # CONFIG_SND_SOC_IPQ_PCM_RAW is not set
+CONFIG_QCOM_RESTART_REASON=y

feeds/ipq807x/ipq807x/modules.mk

@@ -59,3 +59,39 @@ Kernel configs for ath11k support specific to ipq807x and IPQ60xx
 endef
 
 $(eval $(call KernelPackage,qrtr_mproc))
+
+define KernelPackage/bt_tty
+  TITLE:= BT Inter-processor Communication
+  DEPENDS+= @TARGET_ipq807x
+  KCONFIG:= \
+          CONFIG_QTI_BT_TTY=y \
+          CONFIG_QCOM_MDT_LOADER=y
+  FILES:= $(LINUX_DIR)/drivers/soc/qcom/bt/bt_rproc.ko
+  AUTOLOAD:=$(call AutoLoad,53,bt_rproc,1)
+endef
+
+define KernelPackage/bt_tty/description
+BT Interprocessor Communication support specific to IPQ50xx
+endef
+
+$(eval $(call KernelPackage,bt_tty))
+
+define KernelPackage/usb-phy-ipq5018
+  TITLE:=DWC3 USB PHY driver for IPQ5018
+  DEPENDS:=@TARGET_ipq807x_ipq50xx
+  KCONFIG:= \
+        CONFIG_USB_QCA_M31_PHY \
+        CONFIG_PHY_IPQ_UNIPHY_USB
+  FILES:= \
+        $(LINUX_DIR)/drivers/usb/phy/phy-qca-m31.ko \
+        $(LINUX_DIR)/drivers/phy/phy-qca-uniphy.ko
+  AUTOLOAD:=$(call AutoLoad,45,phy-qca-m31 phy-qca-uniphy,1)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-ipq5018/description
+ This driver provides support for the USB PHY drivers
+ within the IPQ5018 SoCs.
+endef
+
+$(eval $(call KernelPackage,usb-phy-ipq5018))

feeds/wifi-ax/ath11k-wifi/Makefile

@@ -29,6 +29,7 @@ ALLWIFIBOARDS:= \
 	cig-wf194c \
 	cig-wf194c4 \
 	cig-wf196 \
+	cybertan-eww622-a1 \
 	edgecore-eap101 \
 	sercomm-wallaby \
 	edgecore-eap102 \
@@ -78,12 +79,18 @@ define ath11k-wifi-install-one-to
 endef
 
 define ath11k-wifi-install-one
+  $(if $(filter $(suffix $(1)),.IPQ5018),\
+    $(call ath11k-wifi-install-one-to,$(1),$(2),ath11k/IPQ5018/hw1.0/),\
+  )
   $(if $(filter $(suffix $(1)),.IPQ6018),\
     $(call ath11k-wifi-install-one-to,$(1),$(2),ath11k/IPQ6018/hw1.0/),\
   )
   $(if $(filter $(suffix $(1)),.IPQ8074),\
     $(call ath11k-wifi-install-one-to,$(1),$(2),ath11k/IPQ8074/hw2.0/),\
   )
+  $(if $(filter $(suffix $(1)),.QCN9074),\
+    $(call ath11k-wifi-install-one-to,$(1),$(2),ath11k/QCN9074/hw1.0/),\
+  )
 
 endef
 # Blank line required at end of above define due to foreach context
@@ -145,6 +152,7 @@ $(eval $(call generate-ath11k-wifi-package,cig-wf188n,Cigtech WF188n))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c,Cigtech WF194c))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c4,Cigtech WF194c4))
 $(eval $(call generate-ath11k-wifi-package,cig-wf196,Cigtech WF196))
+$(eval $(call generate-ath11k-wifi-package,cybertan-eww622-a1,CyberTan EWW622 A1))
 $(eval $(call generate-ath11k-wifi-package,sercomm-wallaby,Sercomm Kiwi))
 $(eval $(call generate-ath11k-wifi-package,wallys-dr6018,Wallys DR6018))
 $(eval $(call generate-ath11k-wifi-package,wallys-dr6018-v4,Wallys DR6018 V4))

profiles/cybertan_eww622-a1.yml

@@ -0,0 +1,12 @@
+---
+profile: cybertan_eww622_a1
+target: ipq807x
+subtarget: ipq50xx
+description: Build image for the CyberTan EWW622-A1
+image: bin/targets/ipq807x/ipq50xx/openwrt-ipq807x-cybertan_eww622_a1-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x
+include:
+  - wifi-ax
+  - ucentral-ap