scottk/wlan-ap
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-ap.git synced 2025-10-29 09:32:34 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity

ipq5018: Update EWW631-B1 to support 512M Memory

Browse Source 
Signed-off-by: wingate.chi <wingate.chi@cybertan.com.tw>
This commit is contained in:
wingate.chi
2023-10-26 16:03:54 +08:00
committed by John Crispin
parent b2ad71e97d
commit 2b8e68551e
11 changed files with 454 additions and 253 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network
View File

@@ -127,17 +127,10 @@ qcom_setup_interfaces()
;;
cybertan,eww631-a1)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch1"
ucidef_add_switch_attr "switch1" "enable" "false"
ucidef_add_switch_attr "switch1" "reset" "true"
ucidef_set_interface_lan ""
;;
cybertan,eww631-b1)
ucidef_add_switch "switch0"
ucidef_set_interface_wan "eth0"
ucidef_set_interface_lan ""
ucidef_add_switch "switch1"
ucidef_add_switch_attr "switch1" "enable" "false"
ucidef_add_switch_attr "switch1" "reset" "true"
ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6@eth0"
;;
wallys,dr5018)
ucidef_set_interface_lan "eth0 eth1"
@@ -195,10 +188,14 @@ qcom_setup_macs()
;;
cybertan,eww631-a1|\
cybertan,eww631-b1)
mac=$(grep -i -m 1 BaseMacAddress= /dev/`cat /proc/mtd | grep APPSBLENV | cut -d: -f1` | cut -d= -f2)
[ -z "$mac"] && mac="00:11:22:33:44:00"
mtd=$(find_mtd_chardev "0:APPSBLENV")
[ -z "$mtd" ] && return;
mac=$(grep BaseMacAddress= $mtd | cut -d '=' -f2)
[ -z "$mac" ] && return;
wan_mac=$(macaddr_canonicalize $mac)
lan_mac=$(macaddr_add "$wan_mac" 1)
ucidef_set_network_device_mac eth0 $wan_mac
ip link set eth0 address $wan_mac
ucidef_set_label_macaddr $wan_mac
;;
cig,wf188n|\
@@ -227,7 +224,7 @@ qcom_setup_macs()
;;
cybertan,eww622-a1)
mac=$(grep -i -m 1 mac_addr_base= /dev/`cat /proc/mtd | grep devinfo | cut -d: -f1` | cut -d= -f2)
[ -z "$mac"] && mac="00:11:22:33:44:55"
[ -z "$mac" ] && mac="00:11:22:33:44:55"
wan_mac=$(macaddr_canonicalize $mac)
lan_mac=$(macaddr_add "$wan_mac" 1)
ucidef_set_network_device_mac eth0 $wan_mac

31
feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
View File

@@ -99,6 +99,27 @@ ath11k_generate_macs_wf186h() {
echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
}
ath11k_generate_macs_eww631_a1() {
touch /lib/firmware/ath11k-macs
local dev=$(find_mtd_chardev "0:APPSBLENV")
mac=$(grep BaseMacAddress= $dev | cut -d '=' -f2)
eth=$(macaddr_canonicalize $mac)
mac1=$(macaddr_add $eth 1)
mac2=$(macaddr_add $eth 2)
echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
}
ath11k_generate_macs_eww631_b1() {
touch /lib/firmware/ath11k-macs
local dev=$(find_mtd_chardev "0:APPSBLENV")
mac=$(grep BaseMacAddress= $dev | cut -d '=' -f2)
eth=$(macaddr_canonicalize $mac)
mac1=$(macaddr_add $eth 2)
mac2=$(macaddr_add $eth 3)
echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
}
caldata_die() {
echo "caldata: " "$*"
@@ -213,12 +234,12 @@ ath11k/qcn6122/hw1.0/caldata_2.bin)
case "$board" in
motorola,q14|\
wallys,dr5018|\
cybertan,eww631-a1|\
cybertan,eww631-b1|\
edgecore,eap104|\
liteon,wpx8324)
caldata_extract "0:ART" 0x4c000 0x20000
;;
cybertan,eww631-a1|\
cybertan,eww631-b1|\
muxi,ap3220l)
caldata_extract "0:ART" 0x26800 0x20000
;;
@@ -290,6 +311,12 @@ ath11k-macs)
cig,wf186h)
ath11k_generate_macs_wf186h
;;
cybertan,eww631-a1)
ath11k_generate_macs_eww631_a1
;;
cybertan,eww631-b1)
ath11k_generate_macs_eww631_b1
;;
esac
;;
*)

622
feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-eww631-b1.dts Normal file → Executable file
View File

@@ -19,104 +19,84 @@
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP02.1";
compatible = "qcom,ipq5018-mp02.1", "qcom,ipq5018";
model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
interrupt-parent = <&intc>;
MP_256;
/delete-property/ MP_512;
aliases {
sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
serial0 = &blsp1_uart1;
//serial1 = &blsp1_uart2;
serial1 = &blsp1_uart2;
ethernet0 = "/soc/dp1";
ethernet1 = "/soc/dp2";
};
chosen {
bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
#ifdef __IPQ_MEM_PROFILE_256_MB__
bootargs-append = " swiotlb=1";
#else
bootargs-append = " swiotlb=1 coherent_pool=2M";
#endif
stdout-path = "serial0";
};
/* 256 MB Profile
* +=========+==============+========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +--------+--------------+-------------------------+
* | | | |
* | | | |
* | NSS | 0x40000000 | 8MB |
* | | | |
* | | | |
* +--------+--------------+-------------------------+
* | | | |
* | | | |
* | | | |
* | | | |
* | Linux | 0x40800000 | Depends on total memory |
* | | | |
* | | | |
* | | | |
* + | | |
* +--------+--------------+-------------------------+
* | | | |
* | uboot | 0x4A600000 | 4MB |
* | | | |
* +--------+--------------+-------------------------+
* | SBL | 0x4AA00000 | 1MB |
* +--------+--------------+-------------------------+
* | smem | 0x4AB00000 | 1MB |
* +--------+--------------+-------------------------+
* | | | |
* | TZ | 0x4AC00000 | 4MB |
* | | | |
* +--------+--------------+-------------------------+
* | | | |
* | | | |
* | | | |
* | Q6 | 0x4B000000 | 20MB |
* | code/ | | |
* | data | | |
* +--------+--------------+-------------------------+
* | | | |
* |IPQ5018 | 0x4C400000 | 13MB |
* | data | | |
* +--------+--------------+-------------------------+
* | M3 Dump| 0x4D100000 | 1MB |
* +--------+--------------+-------------------------+
* | QDSS | 0x4D200000 | 1MB |
* +--------+--------------+-------------------------+
* |QCN6122 | 0x4D300000 | 15MB |
* | data | | |
* +--------+--------------+-------------------------+
* | M3 Dump| 0x4E200000 | 1MB |
* +--------+--------------+-------------------------+
* | QDSS | 0x4E300000 | 1MB |
* +--------+--------------+-------------------------+
* |QCN6122 | 0x4E400000 | 15MB |
* | data | | |
* +--------+--------------+-------------------------+
* | M3 Dump| 0x4F300000 | 1MB |
* +--------+--------------+-------------------------+
* | QDSS | 0x4F400000 | 1MB |
* +--------+--------------+-------------------------+
* | |
* | Rest of the memory for Linux |
* | |
* +=================================================+
*/
reserved-memory {
/delete-node/ nss@40000000;
nss@40000000 {
no-map;
reg = <0x0 0x40000000 0x0 0x0800000>;
};
#ifdef __IPQ_MEM_PROFILE_256_MB__
/* 256 MB Profile
* +==========+==============+=========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +----------+--------------+-------------------------+
* | NSS | 0x40000000 | 8MB |
* +----------+--------------+-------------------------+
* | Linux | 0x40800000 | Depends on total memory |
* +----------+--------------+-------------------------+
* | uboot | 0x4A600000 | 4MB |
* +----------+--------------+-------------------------+
* | SBL | 0x4AA00000 | 1MB |
* +----------+--------------+-------------------------+
* | smem | 0x4AB00000 | 1MB |
* +----------+--------------+-------------------------+
* | TZ | 0x4AC00000 | 4MB |
* +----------+--------------+-------------------------+
* | Q6 | | |
* | code/ | 0x4B000000 | 20MB |
* | data | | |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | data | 0x4C400000 | 13MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | M3 Dump | 0x4D100000 | 1MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | QDSS | 0x4D200000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | data | 0x4D300000 | 15MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | M3 Dump | 0x4E200000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | QDSS | 0x4E300000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | data | 0x4E400000 | 15MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | M3 Dump | 0x4F300000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | QDSS | 0x4F400000 | 1MB |
* +----------+--------------+-------------------------+
* | |
* | Rest of the memory for Linux |
* | |
* +===================================================+
*/
q6_mem_regions: q6_mem_regions@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 0x4500000>;
@@ -171,20 +151,153 @@
no-map;
reg = <0x0 0x4F400000 0x0 0x100000>;
};
#else
/* 512MB/1GB Profiles
* +==========+==============+=========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +----------+--------------+-------------------------+
* | NSS | 0x40000000 | 16MB |
* +----------+--------------+-------------------------+
* | Linux | 0x41000000 | Depends on total memory |
* +----------+--------------+-------------------------+
* | uboot | 0x4A600000 | 4MB |
* +----------+--------------+-------------------------+
* | SBL | 0x4AA00000 | 1MB |
* +----------+--------------+-------------------------+
* | smem | 0x4AB00000 | 1MB |
* +----------+--------------+-------------------------+
* | TZ | 0x4AC00000 | 4MB |
* +----------+--------------+-------------------------+
* | Q6 | | |
* | code/ | 0x4B000000 | 20MB |
* | data | | |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | data | 0x4C400000 | 14MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | M3 Dump | 0x4D200000 | 1MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | QDSS | 0x4D300000 | 1MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | Caldb | 0x4D400000 | 2MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | data | 0x4D600000 | 16MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | M3 Dump | 0x4E600000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | QDSS | 0x4E700000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | Caldb | 0x4E800000 | 5MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | data | 0x4ED00000 | 16MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | M3 Dump | 0x4FD00000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | QDSS | 0x4FE00000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | Caldb | 0x4FF00000 | 5MB |
* +----------+--------------+-------------------------+
* | |
* | Rest of the memory for Linux |
* | |
* +===================================================+
*/
q6_mem_regions: q6_mem_regions@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 0x5400000>;
};
q6_code_data: q6_code_data@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 01400000>;
};
q6_ipq5018_data: q6_ipq5018_data@4C400000 {
no-map;
reg = <0x0 0x4C400000 0x0 0xE00000>;
};
m3_dump: m3_dump@4D200000 {
no-map;
reg = <0x0 0x4D200000 0x0 0x100000>;
};
q6_etr_region: q6_etr_dump@4D300000 {
no-map;
reg = <0x0 0x4D300000 0x0 0x100000>;
};
q6_caldb_region: q6_caldb_region@4D400000 {
no-map;
reg = <0x0 0x4D400000 0x0 0x200000>;
};
q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
no-map;
reg = <0x0 0x4D600000 0x0 0x1000000>;
};
m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
no-map;
reg = <0x0 0x4E600000 0x0 0x100000>;
};
q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
no-map;
reg = <0x0 0x4E700000 0x0 0x100000>;
};
q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
no-map;
reg = <0x0 0x4E800000 0x0 0x500000>;
};
q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
no-map;
reg = <0x0 0x4ED00000 0x0 0x1000000>;
};
m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
no-map;
reg = <0x0 0x4FD00000 0x0 0x100000>;
};
q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
no-map;
reg = <0x0 0x4FE00000 0x0 0x100000>;
};
q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
no-map;
reg = <0x0 0x4FF00000 0x0 0x500000>;
};
#endif
};
soc {
serial@78af000 {
status = "ok";
};
/*
/*
blsp1_uart2: serial@78b0000 {
pinctrl-0 = <&blsp1_uart_pins>;
pinctrl-names = "default";
};
*/
*/
qpic_bam: dma@7984000{
status = "ok";
};
@@ -258,7 +371,6 @@
port@0 {
port_id = <1>;
phy_address = <7>;
// mdiobus = <&mdio0>;
};
port@1 {
port_id = <2>;
@@ -271,10 +383,9 @@
mode = "normal";
speed = "all";
blink_en = "enable";
active = "low";
active = "high";
};
};
ess-switch1@1 {
compatible = "qcom,ess-switch-qca83xx";
device_id = <1>;
@@ -282,7 +393,7 @@
mdio-bus = <&mdio1>;
reset_gpio = <0x26>;
switch_cpu_bmp = <0x40>; /* cpu port bitmap (Port 6 GMAC) */
switch_lan_bmp = <0x1e>; /* lan port bitmap */
switch_lan_bmp = <0x3c>; /* lan port bitmap */
switch_wan_bmp = <0x0>; /* wan port bitmap */
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
@@ -311,15 +422,13 @@
port_id = <4>;
phy_address = <3>;
};
port@4 {
port_id = <5>;
phy_address = <4>;
};
};
};
};
qcom_q6v5_wcss@CD00000 {
memory-region = <&q6_mem_regions>;
};
dp1 {
device_type = "network";
compatible = "qcom,nss-dp";
@@ -333,9 +442,41 @@
phy-mode = "sgmii";
};
dp2 {
device_type = "network";
compatible = "qcom,nss-dp";
clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
clock-names = "nss-snoc-gmac-axi-clk";
qcom,id = <1>;
reg = <0x39C00000 0x10000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
qcom,mactype = <2>;
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <7>;
mdio-bus = <&mdio0>;
local-mac-address = [000000000000];
phy-mode = "sgmii";
};
qcom,test@0 {
status = "ok";
};
/*
lpass: lpass@0xA000000{
status = "disabled";
};
pcm: pcm@0xA3C0000{
pinctrl-0 = <&audio_pins>;
pinctrl-names = "default";
status = "disabled";
};
pcm_lb: pcm_lb@0 {
status = "disabled";
};
*/
};
thermal-zones {
@@ -343,12 +484,8 @@
};
};
&sdhc_1 {
status = "disabled";
};
&tlmm {
pinctrl-0 = <&blsp0_uart_pins>;
pinctrl-0 = <&blsp0_uart_pins>; //<&blsp0_uart_pins &phy_led_pins>;
pinctrl-names = "default";
blsp0_uart_pins: blsp0_uart_pins {
@@ -358,44 +495,15 @@
bias-disable;
};
};
/*
/*
blsp1_uart_pins: blsp1_uart_pins {
blsp1_uart_rx {
pins = "gpio23";
blsp1_uart_rx_tx {
pins = "gpio23", "gpio25", "gpio24", "gpio26";
function = "blsp1_uart2";
drive-strength = <8>;
input-enable;
bias-disable;
bias-pull-up;
};
blsp1_uart_tx {
pins = "gpio25";
function = "blsp1_uart2";
drive-strength = <8>;
bias-disable;
output-high;
bias-pull-up;
};
blsp1_uart_rfr {
pins = "gpio24";
function = "blsp1_uart2";
drive-strength = <8>;
bias-disable;
output-high;
bias-pull-up;
};
blsp1_uart_cts {
pins = "gpio26";
function = "blsp1_uart2";
drive-strength = <8>;
bias-disable;
input-enable;
bias-pull-up;
};
};
*/
*/
blsp0_spi_pins: blsp0_spi_pins {
mux {
pins = "gpio10", "gpio11", "gpio12", "gpio13";
@@ -405,56 +513,6 @@
};
};
/*
phy_pins: phy_pins {
phy_intr {
pins = "gpio25";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
phy_reset {
pins = "gpio26";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
output-low;
};
};
*/
mdio1_pins: mdio_pinmux {
mux_0 {
pins = "gpio36";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mux_1 {
pins = "gpio37";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
};
i2c_pins: i2c_pins {
i2c_scl {
pins = "gpio25";
function = "blsp2_i2c1";
drive-strength = <8>;
bias-disable;
};
i2c_sda {
pins = "gpio26";
function = "blsp2_i2c1";
drive-strength = <8>;
bias-disable;
};
};
qspi_nand_pins: qspi_nand_pins {
qspi_clock {
pins = "gpio9";
@@ -494,6 +552,47 @@
};
};
mdio1_pins: mdio_pinmux {
mux_0 {
pins = "gpio36";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mux_1 {
pins = "gpio37";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
};
/*
phy_led_pins: phy_led_pins {
gephy_led_pin {
pins = "gpio46";
function = "led0";
drive-strength = <8>;
bias-pull-down;
};
};
*/
i2c_pins: i2c_pins {
i2c_scl {
pins = "gpio25";
function = "blsp2_i2c1";
drive-strength = <8>;
bias-disable;
};
i2c_sda {
pins = "gpio26";
function = "blsp2_i2c1";
drive-strength = <8>;
bias-disable;
};
};
button_pins: button_pins {
reset_button {
pins = "gpio28";
@@ -502,13 +601,64 @@
bias-pull-up;
};
};
/*
audio_pins: audio_pinmux {
mux_1 {
pins = "gpio24";
function = "audio_rxbclk";
drive-strength = <8>;
bias-pull-down;
};
mux_2 {
pins = "gpio25";
function = "audio_rxfsync";
drive-strength = <8>;
bias-pull-down;
};
mux_3 {
pins = "gpio26";
function = "audio_rxd";
drive-strength = <8>;
bias-pull-down;
};
mux_4 {
pins = "gpio27";
function = "audio_txmclk";
drive-strength = <8>;
bias-pull-down;
};
mux_5 {
pins = "gpio28";
function = "audio_txbclk";
drive-strength = <8>;
bias-pull-down;
};
mux_6 {
pins = "gpio29";
function = "audio_txfsync";
drive-strength = <8>;
bias-pull-down;
};
mux_7 {
pins = "gpio30";
function = "audio_txd";
drive-strength = <8>;
bias-pull-down;
};
};
*/
poe_pins: poe_pinmux {
/*
LAN port PoE output enable
H --> enable; L --> disable (Default setting to H)
*/
mux_0 {
mux_0 { /* PoE_OUT_EN */
pins = "gpio24";
function = "gpio";
drive-strength = <2>;
@@ -531,14 +681,12 @@
drive-strength = <8>;
bias-disable;
};
sys_blue {
pins = "gpio30";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
sys_red {
pins = "gpio46";
function = "gpio";
@@ -572,36 +720,23 @@
label = "sys:green";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; /* GPIO_1/ATST_QP0 */
default-state="off";
/* linux,default-trigger = "timer";
active-delay = <700>;
inactive-delay = <700>;
default-state="on"; */
};
led@30 {
label = "sys:blue";
gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; /* GPIO_30 */
default-state="on";
/* linux,default-trigger = "timer";
active-delay = <700>;
inactive-delay = <700>;
default-state="on"; */
};
led@46 {
label = "sys:red";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; /* GPIO_46 */
default-state="off";
/* linux,default-trigger = "timer";
active-delay = <700>;
inactive-delay = <700>;
default-state="on"; */
};
};
};
&usb3 {
status = "disabled";
device-power-gpio = <&tlmm 24 1>;
};
&eud {
@@ -610,7 +745,7 @@
&pcie_x1 {
status = "disabled";
perst-gpio = <&tlmm 27 1>;
perst-gpio = <&tlmm 18 1>;
};
&pcie_x2 {
@@ -618,6 +753,10 @@
perst-gpio = <&tlmm 15 1>;
};
&bt {
status = "disabled";
};
&dwc_0 {
/delete-property/ #phy-cells;
/delete-property/ phys;
@@ -637,7 +776,7 @@
};
&pcie_x1_rp {
status = "disabled";
status = "disabled";
mhi_0: qcom,mhi@0 {
reg = <0 0 0 0 0 >;
@@ -645,10 +784,11 @@
};
&pcie_x2_rp {
status = "disabled";
status = "disabled";
mhi_1: qcom,mhi@1 {
reg = <0 0 0 0 0 >;
};
};
@@ -662,12 +802,11 @@
&qcom_q6v5_wcss {
qcom,multipd_arch;
memory-region = <&q6_mem_regions>;
qcom,share_bootargs;
qcom,bootargs_smem = <507>;
/* Please refer the IPQ50xx SoC Software doc to define pcie reset pin */
boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
<0x2 0x4 0x2 0x0F 0x0 0x0>;
<0x2 0x4 0x2 0x12 0x0 0x0>;
/* IPQ5018 */
q6v5_wcss_userpd1 {
m3_firmware = "IPQ5018/m3_fw.mdt";
@@ -688,8 +827,13 @@
qca,asid = <1>;
qca,auto-restart;
qca,int_radio;
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_ipq5018_data>, <&m3_dump>,
<&q6_etr_region>;
#else
memory-region = <&q6_ipq5018_data>, <&m3_dump>,
<&q6_etr_region>, <&q6_caldb_region>;
#endif
};
/* QCN6122 6G */
@@ -711,8 +855,13 @@
"spawn";
qca,asid = <2>;
qca,auto-restart;
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
<&q6_qcn6122_etr_1>;
#else
memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
#endif
};
/* QCN6122 5G */
@@ -734,8 +883,13 @@
"spawn";
qca,asid = <3>;
qca,auto-restart;
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
<&q6_qcn6122_etr_2>;
#else
memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
#endif
};
};
@@ -753,39 +907,65 @@
status = "ok";
};
&wifi0 {
/* IPQ5018 24G*/
/* IPQ5018 */
qcom,multipd_arch;
qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
#ifdef __IPQ_MEM_PROFILE_256_MB__
qcom,tgt-mem-mode = <2>;
#else
qcom,tgt-mem-mode = <1>;
#endif
qcom,board_id = <0x24>;
qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
#ifdef __CNSS2__
qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
#else
qcom,caldb-addr = <0x4D400000>;
qcom,caldb-size = <0x200000>;
nss-radio-priority = <0>;
m3-dump-addr = <0x4D200000>;
mem-region = <&q6_ipq5018_data>;
#endif
qcom,caldb-size = <0x200000>;
status = "ok";
};
&wifi1 {
/* QCN6122 5G */
/* QCN6122 6G */
qcom,multipd_arch;
qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
#ifdef __IPQ_MEM_PROFILE_256_MB__
qcom,tgt-mem-mode = <2>;
#else
qcom,tgt-mem-mode = <1>;
#endif
qcom,board_id = <0x60>;
qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
qcom,caldb-addr = <0x4E800000>;
m3-dump-addr = <0x4E600000>;
nss-radio-priority = <1>;
mem-region = <&q6_qcn6122_data1>;
qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
#ifdef __CNSS2__
qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
#else
qcom,caldb-addr = <0x4FF00000>;
m3-dump-addr = <0x4FD00000>;
#endif
qcom,caldb-size = <0x500000>;
status = "ok";
};
&wifi2 {
/* QCN6122 6G */
qcom,multipd_arch;
qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
#ifdef __IPQ_MEM_PROFILE_256_MB__
qcom,tgt-mem-mode = <2>;
#else
qcom,tgt-mem-mode = <1>;
#endif
qcom,board_id = <0xb0>;
qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
#ifdef __CNSS2__
qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
#else
qcom,caldb-addr = <0x4FF00000>;
m3-dump-addr = <0x4FD00000>;
#endif
qcom,caldb-size = <0x500000>;
status = "disabled";
};

2
feeds/ipq807x/ipq807x/image/ipq50xx.mk
View File

@@ -69,7 +69,7 @@ define Device/cybertan_eww631_b1
DEVICE_DTS := qcom-ipq5018-eww631-b1
SUPPORTED_DEVICES := cybertan,eww631-b1
DEVICE_PACKAGES := ath11k-wifi-cybertan-eww631-b1 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
DEVICE_DTS_CONFIG := config@mp02.1
DEVICE_DTS_CONFIG := config@mp03.5-c1
endef
TARGET_DEVICES += cybertan_eww631_b1

12
feeds/ipq807x/qca-thermald-10.4/src/ipq-thermald-cybertan-eww631-a1.conf
View File

@@ -3,13 +3,13 @@ sampling 5000
[tsens_tz_sensor1]
sampling 5000
thresholds 105 110 115 119 120
thresholds_clr 0 100 105 110 115
thresholds_clr 0 100 105 110 115
actions cooling cooling cooling cooling shutdown
action_info 35 35 50 70 800000
action_info 0 35 50 70 800000
[tsens_tz_sensor4]
sampling 5000
thresholds 105 107 112 119 120
thresholds_clr 0 100 105 110 115
actions cooling cooling cooling cooling shutdown
action_info 0 20 30 50 800000
thresholds 105 110 115 119 120
thresholds_clr 0 100 105 110 115
actions cooling cooling cooling cooling shutdown
action_info 0 20 30 50 800000

16
feeds/ipq807x/qca-thermald-10.4/src/ipq-thermald-cybertan-eww631-b1.conf
View File

@@ -2,14 +2,14 @@ sampling 5000
[tsens_tz_sensor1]
sampling 5000
thresholds 70 80 90 105 115 120
thresholds_clr 0 75 85 100 110 113
actions cooling cooling cooling cooling cooling shutdown
action_info 0 25 45 65 90 800000
thresholds 105 115 119 125
thresholds_clr 0 105 110 120
actions cooling cooling cooling cooling
action_info 0 20 50 70
[tsens_tz_sensor4]
sampling 5000
thresholds 70 80 90 105 115 120
thresholds_clr 0 75 85 100 110 113
actions cooling cooling cooling cooling cooling shutdown
action_info 0 15 25 45 60 800000
thresholds 105 115 119 125
thresholds_clr 0 105 110 120
actions cooling cooling cooling cooling
action_info 0 20 50 70

BIN
feeds/wifi-ax/ath11k-wifi/board-cybertan-eww631-a1.bin.IPQ5018
View File

Binary file not shown.

BIN
feeds/wifi-ax/ath11k-wifi/board-cybertan-eww631-a1.bin.QCN6122
View File

Binary file not shown.

BIN
feeds/wifi-ax/ath11k-wifi/board-cybertan-eww631-b1.bin.IPQ5018 Normal file → Executable file
View File

Binary file not shown.

BIN
feeds/wifi-ax/ath11k-wifi/board-cybertan-eww631-b1.bin.QCN6122 Normal file → Executable file
View File

Binary file not shown.

3
profiles/cybertan_eww631-b1.yml
View File

@@ -12,6 +12,3 @@ packages:
include:
- wifi-ax
- ucentral-ap
diffconfig: |
CONFIG_KERNEL_IPQ_MEM_PROFILE=256
CONFIG_KERNEL_ARCH_IPQ256M=y