From 3b68f33298137b7e5b2b17215474fbdcae115cfd Mon Sep 17 00:00:00 2001 From: Tanya Singh Date: Tue, 19 Sep 2023 10:49:36 +0200 Subject: [PATCH] ipq50xx: Support OAP101 and OAP101e-6E Fixes: WIFI-12943 Signed-off-by: Tanya Singh --- .github/workflows/build-dev.yml | 2 +- .../ipq50xx/base-files/etc/board.d/01_leds | 4 +- .../ipq50xx/base-files/etc/board.d/02_network | 6 +- .../etc/hotplug.d/firmware/10-ath11k-caldata | 7 +- .../hotplug.d/firmware/10-ath11k-caldata.orig | 111 ++ .../base-files/lib/upgrade/platform.sh | 8 +- .../boot/dts/qcom/qcom-ipq5018-oap101.dts | 949 +++++++++++++++++ .../boot/dts/qcom/qcom-ipq5018-oap101e-6e.dts | 971 ++++++++++++++++++ feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk | 18 + profiles/edgecore_oap101.yml | 20 + profiles/edgecore_oap101e-6e.yml | 20 + 11 files changed, 2109 insertions(+), 7 deletions(-) create mode 100755 feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata.orig create mode 100755 feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-oap101.dts create mode 100755 feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-oap101e-6e.dts create mode 100644 profiles/edgecore_oap101.yml create mode 100644 profiles/edgecore_oap101e-6e.yml diff --git a/.github/workflows/build-dev.yml b/.github/workflows/build-dev.yml index e65ebf013..686f1452c 100644 --- a/.github/workflows/build-dev.yml +++ b/.github/workflows/build-dev.yml @@ -21,7 +21,7 @@ jobs: strategy: fail-fast: false matrix: - target: [ 'cig_wf186w', 'cig_wf188n-ca', 'cig_wf188n-ca-ath12', 'cig_wf188n-us', 'cig_wf196-us', 'cig_wf196-ca', 'cig_wf196-ca-ath12', 'cig_wf610d', 'cig_wf660a', 'cig_wf808', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap101-ath12', 'edgecore_eap102', 'edgecore_eap102-ath12', 'edgecore_eap104', 'edgecore_eap104-ath12', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_oap101-6e', 'edgecore_oap101e', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4xi_w', 'hfcl_ion4xi_HMR', 'hfcl_ion4x_w', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ] + target: [ 'cig_wf186w', 'cig_wf188n-ca', 'cig_wf188n-ca-ath12', 'cig_wf188n-us', 'cig_wf196-us', 'cig_wf196-ca', 'cig_wf196-ca-ath12', 'cig_wf610d', 'cig_wf660a', 'cig_wf808', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap101-ath12', 'edgecore_eap102', 'edgecore_eap102-ath12', 'edgecore_eap104', 'edgecore_eap104-ath12', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4xi_w', 'hfcl_ion4xi_HMR', 'hfcl_ion4x_w', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ] steps: - uses: actions/checkout@v3 diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds index 974794d30..e01d49aff 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds @@ -12,8 +12,10 @@ edgecore,eap104) ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt" ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0" ;; +edgecore,oap101|\ edgecore,oap101-6e|\ -edgecore,oap101e) +edgecore,oap101e|\ +edgecore,oap101e-6e) ucidef_set_led_netdev "wan" "wan" "red:ethernet" "eth1" ;; hfcl,ion4xi_w) diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network index 6bf5e18d7..cf1de11bc 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network @@ -15,8 +15,10 @@ qcom_setup_interfaces() cig,wf186w) ucidef_add_switch "switch0" "4:wan" "0:lan" "1:lan" "2:lan" "3:lan" "6@eth0" ;; - edgecore,oap101-6e|\ - edgecore,oap101e) + edgecore,oap101|\ + edgecore,oap101-6e|\ + edgecore,oap101e|\ + edgecore,oap101e-6e) ucidef_set_interface_lan "eth0" ucidef_set_interface_wan "eth1" ;; diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata index 5619e8594..fb2382bde 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata @@ -64,8 +64,10 @@ ath11k/IPQ5018/hw1.0/caldata.bin) case "$board" in cig,wf186w|\ edgecore,eap104|\ + edgecore,oap101|\ edgecore,oap101-6e|\ edgecore,oap101e|\ + edgecore,oap101e-6e|\ hfcl,ion4xi_w|\ yuncore,fap655) caldata_extract "0:ART" 0x1000 0x20000 @@ -75,8 +77,10 @@ ath11k/IPQ5018/hw1.0/caldata.bin) ath11k/qcn6122/hw1.0/caldata_1.bin) case "$board" in cig,wf186w|\ + edgecore,oap101|\ edgecore,oap101-6e|\ edgecore,oap101e|\ + edgecore,oap101e-6e|\ hfcl,ion4xi_w|\ yuncore,fap655) caldata_extract "0:ART" 0x26800 0x20000 @@ -86,7 +90,8 @@ ath11k/qcn6122/hw1.0/caldata_1.bin) ath11k/qcn6122/hw1.0/caldata_2.bin) case "$board" in edgecore,eap104|\ - edgecore,oap101-6e) + edgecore,oap101-6e|\ + edgecore,oap101e-6e) caldata_extract "0:ART" 0x4c000 0x20000 ;; esac diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata.orig b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata.orig new file mode 100755 index 000000000..5619e8594 --- /dev/null +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata.orig @@ -0,0 +1,111 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions.sh +. /lib/functions/system.sh + +ath11k_generate_macs() { + touch /lib/firmware/ath11k-macs + eth=$(cat /sys/class/net/eth0/address) + mac1=$(macaddr_add $eth 2) + mac2=$(macaddr_add $eth 3) + mac3=$(macaddr_add $eth 4) + echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs + echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs + echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs +} + +ath11k_generate_macs_wf186w() { + touch /lib/firmware/ath11k-macs + local dev=$(find_mtd_chardev "0:APPSBLENV") + mac=$(grep BaseMacAddress= $dev | cut -dx -f2) + eth=$(macaddr_canonicalize $mac) + mac1=$(macaddr_add $eth 2) + mac2=$(macaddr_add $eth 3) + mac3=$(macaddr_add $eth 4) + echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs + echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs + echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs +} + +ath11k_generate_macs_ion4x() { + touch /lib/firmware/ath11k-macs + wifimac0=$(grep WLAN0_BASEMAC= /dev/mtd13 |cut -d '=' -f2) + wifimac1=$(grep WLAN1_BASEMAC= /dev/mtd13 |cut -d '=' -f2) + wifimac2=00:00:00:00:00:00 + echo -ne \\x${wifimac0//:/\\x} >> /lib/firmware/ath11k-macs + echo -ne \\x${wifimac1//:/\\x} >> /lib/firmware/ath11k-macs + echo -ne \\x${wifimac2//:/\\x} >> /lib/firmware/ath11k-macs +} + +caldata_die() { + echo "caldata: " "$*" + exit 1 +} + +caldata_extract() { + local part=$1 + local offset=$(($2)) + local count=$(($3)) + local mtd + + mtd=$(find_mtd_chardev $part) + [ -n "$mtd" ] || caldata_die "no mtd device found for partition $part" + + dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ + caldata_die "failed to extract calibration data from $mtd" +} + +board=$(board_name) + +case "$FIRMWARE" in +ath11k/IPQ5018/hw1.0/caldata.bin) + case "$board" in + cig,wf186w|\ + edgecore,eap104|\ + edgecore,oap101-6e|\ + edgecore,oap101e|\ + hfcl,ion4xi_w|\ + yuncore,fap655) + caldata_extract "0:ART" 0x1000 0x20000 + ;; + esac + ;; +ath11k/qcn6122/hw1.0/caldata_1.bin) + case "$board" in + cig,wf186w|\ + edgecore,oap101-6e|\ + edgecore,oap101e|\ + hfcl,ion4xi_w|\ + yuncore,fap655) + caldata_extract "0:ART" 0x26800 0x20000 + ;; + esac + ;; +ath11k/qcn6122/hw1.0/caldata_2.bin) + case "$board" in + edgecore,eap104|\ + edgecore,oap101-6e) + caldata_extract "0:ART" 0x4c000 0x20000 + ;; + esac + ;; +ath11k-macs) + case "$board" in + cig,wf186w) + ath11k_generate_macs_wf186w + ;; + edgecore,eap104|\ + yuncore,fap655) + ath11k_generate_macs + ;; + hfcl,ion4xi_w) + ath11k_generate_macs_ion4x + ;; + esac + ;; +*) + exit 1 + ;; +esac diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh b/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh index 128a3aa66..44f105729 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh @@ -72,8 +72,10 @@ platform_check_image() { edgecore,eap104|\ hfcl,ion4xi_w|\ yuncore,fap655|\ + edgecore,oap101|\ edgecore,oap101-6e|\ - edgecore,oap101e) + edgecore,oap101e|\ + edgecore,oap101e-6e) [ "$magic_long" = "73797375" ] && return 0 ;; esac @@ -87,8 +89,10 @@ platform_do_upgrade() { board=$(board_name) case $board in + edgecore,oap101|\ edgecore,oap101-6e|\ - edgecore,oap101e) + edgecore,oap101e|\ + edgecore,oap101e-6e) nand_upgrade_tar "$1" ;; edgecore,eap104) diff --git a/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-oap101.dts b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-oap101.dts new file mode 100755 index 000000000..fcd827636 --- /dev/null +++ b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-oap101.dts @@ -0,0 +1,949 @@ +/dts-v1/; +/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved. + * + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ipq5018.dtsi" + +/ { + #address-cells = <0x2>; + #size-cells = <0x2>; + model = "Edgecore OAP101"; + compatible = "edgecore,oap101", "qcom,ipq5018-mp03.5", "qcom,ipq5018"; + interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + ethernet0 = "/soc/dp1"; + ethernet1 = "/soc/dp2"; + + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyMSM0,115200,n8 rw init=/init"; + bootargs-append = " swiotlb=1 coherent_pool=2M"; + stdout-path = "serial0"; + }; + + reserved-memory { + #ifdef __IPQ_MEM_PROFILE_256_MB__ + /* 256 MB Profile + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 8MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x40800000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 13MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D100000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D300000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E000000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E100000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4E200000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4EF00000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4F000000 | 1MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x4100000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x1400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xD00000>; + }; + + m3_dump: m3_dump@4D100000 { + no-map; + reg = <0x0 0x4D100000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 { + no-map; + reg = <0x0 0x4E000000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 { + no-map; + reg = <0x0 0x4E100000 0x0 0x100000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E200000 { + no-map; + reg = <0x0 0x4E200000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 { + no-map; + reg = <0x0 0x4EF00000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 { + no-map; + reg = <0x0 0x4F000000 0x0 0x100000>; + }; + #else + /* 512MB/1GB Profiles + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 16MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x41000000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 13MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D100000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | Caldb | 0x4D300000 | 2MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D500000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E300000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | Caldb | 0x4E400000 | 5MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4E900000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4F600000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4F700000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | Caldb | 0x4F800000 | 5MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x4D00000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 01400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xD00000>; + }; + + m3_dump: m3_dump@4D100000 { + no-map; + reg = <0x0 0x4D100000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_caldb_region: q6_caldb_region@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0x200000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D500000 { + no-map; + reg = <0x0 0x4D500000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 { + no-map; + reg = <0x0 0x4E200000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 { + no-map; + reg = <0x0 0x4E300000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 { + no-map; + reg = <0x0 0x4E400000 0x0 0x500000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E900000 { + no-map; + reg = <0x0 0x4E900000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 { + no-map; + reg = <0x0 0x4F600000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 { + no-map; + reg = <0x0 0x4F700000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 { + no-map; + reg = <0x0 0x4F800000 0x0 0x500000>; + }; + + #endif + }; + + soc { + serial@78af000 { + status = "ok"; + }; + + blsp1_uart2: serial@78b0000 { + pinctrl-0 = <&blsp1_uart_pins>; + pinctrl-names = "default"; + }; + + qpic_bam: dma@7984000{ + status = "ok"; + }; + + nand: qpic-nand@79b0000 { + pinctrl-0 = <&qspi_nand_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + spi_0: spi@78b5000 { /* BLSP1 QUP0 */ + pinctrl-0 = <&blsp0_spi_pins>; + pinctrl-names = "default"; + cs-select = <0>; + status = "ok"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + linux,modalias = "m25p80", "n25q128a11"; + spi-max-frequency = <50000000>; + use-default-sizes; + }; + + slb9670: slb9670@1{ + compatible = "infineon,slb9670"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <40000000>; + status = "okay"; + }; + }; + + mdio0: mdio@88000 { + status = "ok"; + + ethernet-phy@0 { + reg = <7>; + }; + }; + + mdio1: mdio@90000 { + status = "ok"; + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + phy-reset-gpio = <&tlmm 39 0>; + + ethernet-phy@0 { + reg = <28>; + }; + }; + + ess-instance { + num_devices = <0x1>; + ess-switch@0x39c00000 { + switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/ + cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/ + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <7>; + mdiobus = <&mdio0>; + }; + port@1 { + port_id = <2>; + phy_address = <0x1c>; + mdiobus = <&mdio1>; + port_mac_sel = "QGMAC_PORT"; + }; + }; + led_source@0 { + source = <0>; + mode = "normal"; + speed = "all"; + blink_en = "enable"; + active = "high"; + }; + }; + }; + + dp1 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <1>; + reg = <0x39C00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + qcom,link-poll = <1>; + qcom,phy-mdio-addr = <7>; + mdio-bus = <&mdio0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + qcom,rx-page-mode = <0>; + }; + + dp2 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <2>; + reg = <0x39D00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + qcom,link-poll = <1>; + qcom,phy-mdio-addr = <28>; + mdio-bus = <&mdio1>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + qcom,rx-page-mode = <0>; + }; + + nss-macsec1 { + compatible = "qcom,nss-macsec"; + phy_addr = <0x1c>; + mdiobus = <&mdio1>; + }; + + pcm: pcm@0xA3C0000{ + pinctrl-0 = <&audio_pins>; + pinctrl-names = "default"; + }; + + }; + + qcom,test@0 { + status = "ok"; + }; + + thermal-zones { + status = "ok"; + }; + + leds { + compatible = "gpio-leds"; + + led@0 { + label = "red:ethernet"; + gpios = <&tca9539 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@1 { + label = "green:system"; + gpios = <&tca9539 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led_power: led@2 { + label = "blue:management"; + gpios = <&tca9539 2 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + ble_enable { + gpio-export,name = "ble_enable"; + gpio-export,output = <0>; + gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + }; + + ble_reset { + gpio-export,name = "ble_reset"; + gpio-export,output = <0>; + gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + }; + + ble_backdoor { + gpio-export,name = "ble_backdoor"; + gpio-export,output = <1>; + gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; + }; + + poe_power { + gpio-export,name = "poe_power"; + gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + heater1 { + gpio-export,name = "heater1"; + gpio-export,output = <0>; + gpios = <&tca9539 7 GPIO_ACTIVE_HIGH>; + }; + + heater2 { + gpio-export,name = "heater2"; + gpio-export,output = <0>; + gpios = <&tca9539 8 GPIO_ACTIVE_HIGH>; + }; + + gps_reset { + gpio-export,name = "gps_reset"; + gpio-export,output = <0>; + gpios = <&tca9539 11 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>; + pinctrl-names = "default"; + + blsp0_uart_pins: uart_pins { + blsp0_uart_rx_tx { + pins = "gpio20", "gpio21"; + function = "blsp0_uart0"; + bias-disable; + }; + }; + + blsp1_uart_pins: blsp1_uart_pins { + blsp1_uart_rx_tx { + pins = "gpio23", "gpio25", "gpio24", "gpio26"; + function = "blsp1_uart2"; + bias-disable; + }; + }; + + blsp0_spi_pins: blsp0_spi_pins { + mux { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-disable; + }; + }; + + qspi_nand_pins: qspi_nand_pins { + qspi_clock { + pins = "gpio9"; + function = "qspi_clk"; + drive-strength = <8>; + bias-disable; + }; + + qspi_cs { + pins = "gpio8"; + function = "qspi_cs"; + drive-strength = <8>; + bias-disable; + }; + + qspi_data { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "qspi_data"; + drive-strength = <8>; + bias-disable; + }; + }; + + mdio1_pins: mdio_pinmux { + mux_0 { + pins = "gpio36"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mux_1 { + pins = "gpio37"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + phy_led_pins: phy_led_pins { + gephy_led_pin { + pins = "gpio46"; + function = "led0"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + + i2c_pins: i2c_pins { + i2c_scl { + pins = "gpio33"; + function = "blsp2_i2c0"; + drive-strength = <8>; + /* bias-disable; */ + bias-pull-up; + }; + + i2c_sda { + pins = "gpio34"; + function = "blsp2_i2c0"; + drive-strength = <8>; + /* bias-disable; */ + bias-pull-up; + }; + }; + + button_pins: button_pins { + wps_button { + pins = "gpio32"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + audio_pins: audio_pinmux { + mux_1 { + pins = "gpio24"; + function = "audio_rxbclk"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_2 { + pins = "gpio25"; + function = "audio_rxfsync"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_3 { + pins = "gpio26"; + function = "audio_rxd"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_4 { + pins = "gpio27"; + function = "audio_txmclk"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_5 { + pins = "gpio28"; + function = "audio_txbclk"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_6 { + pins = "gpio29"; + function = "audio_txfsync"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_7 { + pins = "gpio30"; + function = "audio_txd"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&soc { + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = ; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; +}; + +&q6v5_wcss { + compatible = "qcom,ipq5018-q6-mpd"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + firmware = "IPQ5018/q6_fw.mdt"; + reg = <0x0cd00000 0x4040>, + <0x1938000 0x8>, + <0x193d204 0x4>; + reg-names = "qdsp6", + "tcsr-msip", + "tcsr-q6"; + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_Q6_BCR>; + + reset-names = "wcss_aon_reset", + "wcss_q6_reset"; + + clocks = <&gcc GCC_Q6_AXIS_CLK>, + <&gcc GCC_WCSS_ECAHB_CLK>, + <&gcc GCC_Q6_AXIM_CLK>, + <&gcc GCC_Q6_AXIM2_CLK>, + <&gcc GCC_Q6_AHB_CLK>, + <&gcc GCC_Q6_AHB_S_CLK>, + <&gcc GCC_WCSS_AXI_S_CLK>; + clock-names = "gcc_q6_axis_clk", + "gcc_wcss_ecahb_clk", + "gcc_q6_axim_clk", + "gcc_q6_axim2_clk", + "gcc_q6_ahb_clk", + "gcc_q6_ahb_s_clk", + "gcc_wcss_axi_s_clk"; + + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_mem_regions>, <&q6_etr_region>; + #else + memory-region = <&q6_mem_regions>, <&q6_etr_region>, + <&q6_caldb_region>; + #endif + + qcom,rproc = <&q6v5_wcss>; + qcom,bootargs_smem = <507>; + boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>, + <0x2 0x4 0x2 0x12 0x0 0x0>; + status = "ok"; + q6_wcss_pd1: remoteproc_pd1@4ab000 { + compatible = "qcom,ipq5018-wcss-ahb-mpd"; + reg = <0x4ab000 0x20>; + reg-names = "rmb"; + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "IPQ5018/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 8 0>, + <&wcss_smp2p_in 9 0>, + <&wcss_smp2p_in 12 0>, + <&wcss_smp2p_in 11 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_BCR>, + <&gcc GCC_CE_BCR>; + reset-names = "wcss_aon_reset", + "wcss_reset", + "ce_reset"; + + clocks = <&gcc GCC_WCSS_AHB_S_CLK>, + <&gcc GCC_WCSS_ACMT_CLK>, + <&gcc GCC_WCSS_AXI_M_CLK>; + clock-names = "gcc_wcss_ahb_s_clk", + "gcc_wcss_acmt_clk", + "gcc_wcss_axi_m_clk"; + + qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>; + + qcom,smem-states = <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>; + #else + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>, <&q6_caldb_region>; + #endif + + }; + + q6_wcss_pd2: remoteproc_pd2 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "qcn6122/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 16 0>, + <&wcss_smp2p_in 17 0>, + <&wcss_smp2p_in 20 0>, + <&wcss_smp2p_in 19 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 16>, + <&wcss_smp2p_out 17>, + <&wcss_smp2p_out 18>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>; + #else + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>; + #endif + + }; + + q6_wcss_pd3: remoteproc_pd3 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + firmware = "IPQ5018/q6_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 24 0>, + <&wcss_smp2p_in 25 0>, + <&wcss_smp2p_in 28 0>, + <&wcss_smp2p_in 27 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 24>, + <&wcss_smp2p_out 25>, + <&wcss_smp2p_out 26>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>; + #else + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>; + #endif + }; +}; + +&i2c_0 { + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + status = "ok"; + + temperature-sensor@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + #thermal-sensor-cells = <1>; + }; + + tca9539: gpio@74 { + compatible = "ti,tca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + }; + + st33htpi@0{ + compatible = "st,st33htpm-i2c"; + reg = <0x2E>; + }; +}; + +&wifi0 { + /* IPQ5018 */ + qcom,multipd_arch; + qcom,rproc = <&q6_wcss_pd1>; + qcom,userpd-subsys-name = "q6v5_wcss_userpd1"; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x23>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>; + qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>; + qcom,caldb-size = <0x200000>; + mem-region = <&q6_ipq5018_data>; +#else + memory-region = <&q6_ipq5018_data>; +#endif + status = "ok"; +}; + +&wifi1 { + /* QCN6122 5G */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd2"; + qcom,rproc = <&q6_wcss_pd2>; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x60>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>; + qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>; + qcom,caldb-size = <0x500000>; + mem-region = <&q6_qcn6122_data1>; +#else + memory-region = <&q6_qcn6122_data1>; +#endif + status = "ok"; +}; + +&usb3 { + status = "ok"; + device-power-gpio = <&tlmm 24 1>; +}; + +&dwc_0 { + /delete-property/ #phy-cells; + /delete-property/ phys; + /delete-property/ phy-names; +}; + +&hs_m31phy_0 { + status = "ok"; +}; + +&eud { + status = "ok"; +}; + +&pcie_x1 { + perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>; +}; + +&pcie_x2 { + perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>; +}; + +&pcie_x1_rp { + status = "disabled"; + + mhi_0: qcom,mhi@0 { + reg = <0 0 0 0 0 >; + }; +}; + +&pcie_x2_rp { + status = "disabled"; + + mhi_1: qcom,mhi@1 { + reg = <0 0 0 0 0 >; + + }; +}; + +&blsp1_uart2 { + status = "ok"; +}; + +&bt { + status = "disabled"; +}; diff --git a/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-oap101e-6e.dts b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-oap101e-6e.dts new file mode 100755 index 000000000..62d879fb4 --- /dev/null +++ b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-oap101e-6e.dts @@ -0,0 +1,971 @@ +/dts-v1/; +/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved. + * + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ipq5018.dtsi" + +/ { + #address-cells = <0x2>; + #size-cells = <0x2>; + model = "Edgecore OAP101e 6E"; + compatible = "edgecore,oap101e-6e", "qcom,ipq5018-mp03.5", "qcom,ipq5018"; + interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + ethernet0 = "/soc/dp1"; + ethernet1 = "/soc/dp2"; + + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyMSM0,115200,n8 rw init=/init"; + bootargs-append = " swiotlb=1 coherent_pool=2M"; + stdout-path = "serial0"; + }; + + reserved-memory { + #ifdef __IPQ_MEM_PROFILE_256_MB__ + /* 256 MB Profile + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 8MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x40800000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 13MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D100000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D300000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E000000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E100000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4E200000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4EF00000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4F000000 | 1MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x4100000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x1400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xD00000>; + }; + + m3_dump: m3_dump@4D100000 { + no-map; + reg = <0x0 0x4D100000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 { + no-map; + reg = <0x0 0x4E000000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 { + no-map; + reg = <0x0 0x4E100000 0x0 0x100000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E200000 { + no-map; + reg = <0x0 0x4E200000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 { + no-map; + reg = <0x0 0x4EF00000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 { + no-map; + reg = <0x0 0x4F000000 0x0 0x100000>; + }; + #else + /* 512MB/1GB Profiles + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 16MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x41000000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 13MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D100000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | Caldb | 0x4D300000 | 2MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D500000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E300000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | Caldb | 0x4E400000 | 5MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4E900000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4F600000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4F700000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | Caldb | 0x4F800000 | 5MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x4D00000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 01400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xD00000>; + }; + + m3_dump: m3_dump@4D100000 { + no-map; + reg = <0x0 0x4D100000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_caldb_region: q6_caldb_region@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0x200000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D500000 { + no-map; + reg = <0x0 0x4D500000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 { + no-map; + reg = <0x0 0x4E200000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 { + no-map; + reg = <0x0 0x4E300000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 { + no-map; + reg = <0x0 0x4E400000 0x0 0x500000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E900000 { + no-map; + reg = <0x0 0x4E900000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 { + no-map; + reg = <0x0 0x4F600000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 { + no-map; + reg = <0x0 0x4F700000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 { + no-map; + reg = <0x0 0x4F800000 0x0 0x500000>; + }; + + #endif + }; + + soc { + serial@78af000 { + status = "ok"; + }; + + blsp1_uart2: serial@78b0000 { + pinctrl-0 = <&blsp1_uart_pins>; + pinctrl-names = "default"; + }; + + qpic_bam: dma@7984000{ + status = "ok"; + }; + + nand: qpic-nand@79b0000 { + pinctrl-0 = <&qspi_nand_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + spi_0: spi@78b5000 { /* BLSP1 QUP0 */ + pinctrl-0 = <&blsp0_spi_pins>; + pinctrl-names = "default"; + cs-select = <0>; + status = "ok"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + linux,modalias = "m25p80", "n25q128a11"; + spi-max-frequency = <50000000>; + use-default-sizes; + }; + + slb9670: slb9670@1{ + compatible = "infineon,slb9670"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <40000000>; + status = "okay"; + }; + }; + + mdio0: mdio@88000 { + status = "ok"; + + ethernet-phy@0 { + reg = <7>; + }; + }; + + mdio1: mdio@90000 { + status = "ok"; + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + phy-reset-gpio = <&tlmm 39 0>; + + ethernet-phy@0 { + reg = <28>; + }; + }; + + ess-instance { + num_devices = <0x1>; + ess-switch@0x39c00000 { + switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/ + cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/ + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <7>; + mdiobus = <&mdio0>; + }; + port@1 { + port_id = <2>; + phy_address = <0x1c>; + mdiobus = <&mdio1>; + port_mac_sel = "QGMAC_PORT"; + }; + }; + led_source@0 { + source = <0>; + mode = "normal"; + speed = "all"; + blink_en = "enable"; + active = "high"; + }; + }; + }; + + dp1 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <1>; + reg = <0x39C00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + qcom,link-poll = <1>; + qcom,phy-mdio-addr = <7>; + mdio-bus = <&mdio0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + qcom,rx-page-mode = <0>; + }; + + dp2 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <2>; + reg = <0x39D00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + qcom,link-poll = <1>; + qcom,phy-mdio-addr = <28>; + mdio-bus = <&mdio1>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + qcom,rx-page-mode = <0>; + }; + + nss-macsec1 { + compatible = "qcom,nss-macsec"; + phy_addr = <0x1c>; + mdiobus = <&mdio1>; + }; + + pcm: pcm@0xA3C0000{ + pinctrl-0 = <&audio_pins>; + pinctrl-names = "default"; + }; + + }; + + qcom,test@0 { + status = "ok"; + }; + + thermal-zones { + status = "ok"; + }; + + leds { + compatible = "gpio-leds"; + + led@0 { + label = "red:ethernet"; + gpios = <&tca9539 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@1 { + label = "green:system"; + gpios = <&tca9539 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led_power: led@2 { + label = "blue:management"; + gpios = <&tca9539 2 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + ble_enable { + gpio-export,name = "ble_enable"; + gpio-export,output = <0>; + gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + }; + + ble_reset { + gpio-export,name = "ble_reset"; + gpio-export,output = <0>; + gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + }; + + ble_backdoor { + gpio-export,name = "ble_backdoor"; + gpio-export,output = <1>; + gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; + }; + + poe_power { + gpio-export,name = "poe_power"; + gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + heater1 { + gpio-export,name = "heater1"; + gpio-export,output = <0>; + gpios = <&tca9539 7 GPIO_ACTIVE_HIGH>; + }; + + heater2 { + gpio-export,name = "heater2"; + gpio-export,output = <0>; + gpios = <&tca9539 8 GPIO_ACTIVE_HIGH>; + }; + + gps_reset { + gpio-export,name = "gps_reset"; + gpio-export,output = <0>; + gpios = <&tca9539 11 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>; + pinctrl-names = "default"; + + blsp0_uart_pins: uart_pins { + blsp0_uart_rx_tx { + pins = "gpio20", "gpio21"; + function = "blsp0_uart0"; + bias-disable; + }; + }; + + blsp1_uart_pins: blsp1_uart_pins { + blsp1_uart_rx_tx { + pins = "gpio23", "gpio25", "gpio24", "gpio26"; + function = "blsp1_uart2"; + bias-disable; + }; + }; + + blsp0_spi_pins: blsp0_spi_pins { + mux { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-disable; + }; + }; + + qspi_nand_pins: qspi_nand_pins { + qspi_clock { + pins = "gpio9"; + function = "qspi_clk"; + drive-strength = <8>; + bias-disable; + }; + + qspi_cs { + pins = "gpio8"; + function = "qspi_cs"; + drive-strength = <8>; + bias-disable; + }; + + qspi_data { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "qspi_data"; + drive-strength = <8>; + bias-disable; + }; + }; + + mdio1_pins: mdio_pinmux { + mux_0 { + pins = "gpio36"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mux_1 { + pins = "gpio37"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + phy_led_pins: phy_led_pins { + gephy_led_pin { + pins = "gpio46"; + function = "led0"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + + i2c_pins: i2c_pins { + i2c_scl { + pins = "gpio33"; + function = "blsp2_i2c0"; + drive-strength = <8>; + /* bias-disable; */ + bias-pull-up; + }; + + i2c_sda { + pins = "gpio34"; + function = "blsp2_i2c0"; + drive-strength = <8>; + /* bias-disable; */ + bias-pull-up; + }; + }; + + button_pins: button_pins { + wps_button { + pins = "gpio32"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + audio_pins: audio_pinmux { + mux_1 { + pins = "gpio24"; + function = "audio_rxbclk"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_2 { + pins = "gpio25"; + function = "audio_rxfsync"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_3 { + pins = "gpio26"; + function = "audio_rxd"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_4 { + pins = "gpio27"; + function = "audio_txmclk"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_5 { + pins = "gpio28"; + function = "audio_txbclk"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_6 { + pins = "gpio29"; + function = "audio_txfsync"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_7 { + pins = "gpio30"; + function = "audio_txd"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&soc { + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = ; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; +}; + +&q6v5_wcss { + compatible = "qcom,ipq5018-q6-mpd"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + firmware = "IPQ5018/q6_fw.mdt"; + reg = <0x0cd00000 0x4040>, + <0x1938000 0x8>, + <0x193d204 0x4>; + reg-names = "qdsp6", + "tcsr-msip", + "tcsr-q6"; + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_Q6_BCR>; + + reset-names = "wcss_aon_reset", + "wcss_q6_reset"; + + clocks = <&gcc GCC_Q6_AXIS_CLK>, + <&gcc GCC_WCSS_ECAHB_CLK>, + <&gcc GCC_Q6_AXIM_CLK>, + <&gcc GCC_Q6_AXIM2_CLK>, + <&gcc GCC_Q6_AHB_CLK>, + <&gcc GCC_Q6_AHB_S_CLK>, + <&gcc GCC_WCSS_AXI_S_CLK>; + clock-names = "gcc_q6_axis_clk", + "gcc_wcss_ecahb_clk", + "gcc_q6_axim_clk", + "gcc_q6_axim2_clk", + "gcc_q6_ahb_clk", + "gcc_q6_ahb_s_clk", + "gcc_wcss_axi_s_clk"; + + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_mem_regions>, <&q6_etr_region>; + #else + memory-region = <&q6_mem_regions>, <&q6_etr_region>, + <&q6_caldb_region>; + #endif + + qcom,rproc = <&q6v5_wcss>; + qcom,bootargs_smem = <507>; + boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>, + <0x2 0x4 0x2 0x12 0x0 0x0>; + status = "ok"; + q6_wcss_pd1: remoteproc_pd1@4ab000 { + compatible = "qcom,ipq5018-wcss-ahb-mpd"; + reg = <0x4ab000 0x20>; + reg-names = "rmb"; + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "IPQ5018/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 8 0>, + <&wcss_smp2p_in 9 0>, + <&wcss_smp2p_in 12 0>, + <&wcss_smp2p_in 11 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_BCR>, + <&gcc GCC_CE_BCR>; + reset-names = "wcss_aon_reset", + "wcss_reset", + "ce_reset"; + + clocks = <&gcc GCC_WCSS_AHB_S_CLK>, + <&gcc GCC_WCSS_ACMT_CLK>, + <&gcc GCC_WCSS_AXI_M_CLK>; + clock-names = "gcc_wcss_ahb_s_clk", + "gcc_wcss_acmt_clk", + "gcc_wcss_axi_m_clk"; + + qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>; + + qcom,smem-states = <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>; + #else + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>, <&q6_caldb_region>; + #endif + + }; + + q6_wcss_pd2: remoteproc_pd2 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "qcn6122/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 16 0>, + <&wcss_smp2p_in 17 0>, + <&wcss_smp2p_in 20 0>, + <&wcss_smp2p_in 19 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 16>, + <&wcss_smp2p_out 17>, + <&wcss_smp2p_out 18>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>; + #else + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>; + #endif + + }; + + q6_wcss_pd3: remoteproc_pd3 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + firmware = "IPQ5018/q6_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 24 0>, + <&wcss_smp2p_in 25 0>, + <&wcss_smp2p_in 28 0>, + <&wcss_smp2p_in 27 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 24>, + <&wcss_smp2p_out 25>, + <&wcss_smp2p_out 26>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>; + #else + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>; + #endif + }; +}; + +&i2c_0 { + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + status = "ok"; + + temperature-sensor@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + #thermal-sensor-cells = <1>; + }; + + tca9539: gpio@74 { + compatible = "ti,tca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + }; + + st33htpi@0{ + compatible = "st,st33htpm-i2c"; + reg = <0x2E>; + }; +}; + +&wifi0 { + /* IPQ5018 */ + qcom,multipd_arch; + qcom,rproc = <&q6_wcss_pd1>; + qcom,userpd-subsys-name = "q6v5_wcss_userpd1"; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x23>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>; + qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>; + qcom,caldb-size = <0x200000>; + mem-region = <&q6_ipq5018_data>; +#else + memory-region = <&q6_ipq5018_data>; +#endif + status = "ok"; +}; + +&wifi1 { + /* QCN6122 5G */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd2"; + qcom,rproc = <&q6_wcss_pd2>; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x60>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>; + qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>; + qcom,caldb-size = <0x500000>; + mem-region = <&q6_qcn6122_data1>; +#else + memory-region = <&q6_qcn6122_data1>; +#endif + status = "ok"; +}; + +&wifi2 { + /* QCN6122 6G */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd3"; + qcom,rproc = <&q6_wcss_pd3>; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0xb0>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>; + qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>; + qcom,caldb-size = <0x500000>; + mem-region = <&q6_qcn6122_data2>; +#else + memory-region = <&q6_qcn6122_data2>; +#endif + status = "ok"; +}; + +&usb3 { + status = "ok"; + device-power-gpio = <&tlmm 24 1>; +}; + +&dwc_0 { + /delete-property/ #phy-cells; + /delete-property/ phys; + /delete-property/ phy-names; +}; + +&hs_m31phy_0 { + status = "ok"; +}; + +&eud { + status = "ok"; +}; + +&pcie_x1 { + perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>; +}; + +&pcie_x2 { + perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>; +}; + +&pcie_x1_rp { + status = "disabled"; + + mhi_0: qcom,mhi@0 { + reg = <0 0 0 0 0 >; + }; +}; + +&pcie_x2_rp { + status = "disabled"; + + mhi_1: qcom,mhi@1 { + reg = <0 0 0 0 0 >; + + }; +}; + +&blsp1_uart2 { + status = "ok"; +}; + +&bt { + status = "disabled"; +}; diff --git a/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk b/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk index 687eee5cb..43869e596 100644 --- a/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk +++ b/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk @@ -27,6 +27,15 @@ define Device/yuncore_fap655 endef TARGET_DEVICES += yuncore_fap655 +define Device/edgecore_oap101 + DEVICE_TITLE := EdgeCore OAP101 + DEVICE_DTS := qcom-ipq5018-oap101 + SUPPORTED_DEVICES := edgecore,oap101 + DEVICE_PACKAGES := ath11k-wifi-edgecore-oap101 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122 kmod-hwmon-tmp102 kmod-gpio-pca953x ugps kmod-tpm-tis-i2c + DEVICE_DTS_CONFIG := config@mp03.5-c1 +endef +TARGET_DEVICES += edgecore_oap101 + define Device/edgecore_oap101_6e DEVICE_TITLE := EdgeCore OAP101 6E DEVICE_DTS := qcom-ipq5018-oap101-6e @@ -45,6 +54,15 @@ define Device/edgecore_oap101e endef TARGET_DEVICES += edgecore_oap101e +define Device/edgecore_oap101e_6e + DEVICE_TITLE := EdgeCore OAP101e 6E + DEVICE_DTS := qcom-ipq5018-oap101e-6e + SUPPORTED_DEVICES := edgecore,oap101e-6e + DEVICE_PACKAGES := ath11k-wifi-edgecore-oap101 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122 kmod-hwmon-tmp102 kmod-gpio-pca953x ugps kmod-tpm-tis-i2c + DEVICE_DTS_CONFIG := config@mp03.5-c1 +endef +TARGET_DEVICES += edgecore_oap101e_6e + define Device/hfcl_ion4xi_w DEVICE_TITLE := HFCL ION4xi_w DEVICE_DTS := qcom-ipq5018-hfcl-ion4xi_w diff --git a/profiles/edgecore_oap101.yml b/profiles/edgecore_oap101.yml new file mode 100644 index 000000000..2a0bdcbcd --- /dev/null +++ b/profiles/edgecore_oap101.yml @@ -0,0 +1,20 @@ +--- +profile: edgecore_oap101 +target: ipq50xx +subtarget: generic +description: Build image for the EdgeCore OAP101 +image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-edgecore_oap101-squashfs-sysupgrade.tar +feeds: + - name: ipq807x + path: ../../feeds/ipq807x_v5.4 + - name: edgecore + path: ../../feeds/edgecore +include: + - wifi-ax-v54 + - ucentral-ap +packages: + - ipq50xx +diffconfig: | + CONFIG_KERNEL_IPQ_MEM_PROFILE=512 + CONFIG_BUSYBOX_CUSTOM=y + CONFIG_BUSYBOX_CONFIG_STTY=y diff --git a/profiles/edgecore_oap101e-6e.yml b/profiles/edgecore_oap101e-6e.yml new file mode 100644 index 000000000..7503c0779 --- /dev/null +++ b/profiles/edgecore_oap101e-6e.yml @@ -0,0 +1,20 @@ +--- +profile: edgecore_oap101e_6e +target: ipq50xx +subtarget: generic +description: Build image for the EdgeCore OAP101e_6E +image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-edgecore_oap101e_6e-squashfs-sysupgrade.tar +feeds: + - name: ipq807x + path: ../../feeds/ipq807x_v5.4 + - name: edgecore + path: ../../feeds/edgecore +include: + - wifi-ax-v54 + - ucentral-ap +packages: + - ipq50xx +diffconfig: | + CONFIG_KERNEL_IPQ_MEM_PROFILE=512 + CONFIG_BUSYBOX_CUSTOM=y + CONFIG_BUSYBOX_CONFIG_STTY=y