scottk/wlan-ap
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-ap.git synced 2025-11-01 19:07:47 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity

ipq807x: Add support for Plasma Cloud PAX1800 v1

Browse Source 
Device specifications:
======================

* Qualcomm IPQ6000
* 256 MB of RAM
* 64 MB of SPI NOR flash
  - 2x 28 MB available; but one of the 28 MB regions is the recovery image
* 2T2R 2.4 GHz Wi-Fi (11ax)
* 2T2R 5 GHz Wi-Fi (11ax)
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default))
* TTL pins are on board
* 2x ethernet
  - eth0
    + 1000 Mbps Ethernet
    + used as LAN interface
  - eth1
    + 1000 Mbps Ethernet
    + 802.3at POE
    + used as WAN interface
* 12 2A DC
* internal antennas

This device is not exported via a profile in TIP because there were
concerns about the 256MB limitations. But the actual OpenWrt support is
still added for interested parties.

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   setenv bootargs 'console=ttyMSM0,115200n8 rootfstype=squashfs,jffs2 board=PAX1800 root=31:10 mtdparts=spi32766.0:768k(0:SBL1),64k(0:MIBIB),1664k(0:QSEE),64k(0:DEVCFG),128k(0:RPM),64k(0:CDT),64k(0:APPSBLENV),640k(0:APPSBL),256k(0:ART),28672k(inactive),28672k(inactive2),64k(custom),64k(0:KEYS),2304k(0:WIFIFW)'
   tftpboot <filename-of-initramfs-kernel>.bin && bootm

The actual sysupgrade image can then be transferred (on the LAN port) to the
device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>
This commit is contained in:
Sven Eckelmann
2022-03-14 15:47:05 +01:00
committed by John Crispin
parent 128bd3a17e
commit 3e692ed95a
10 changed files with 377 additions and 298 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network
View File

@@ -35,6 +35,7 @@ qcom_setup_interfaces()
yuncore,ax840|\
motorola,q14|\
sercomm,wallaby|\
plasmacloud,pax1800-v1|\
plasmacloud,pax1800-v2)
ucidef_set_interface_lan "eth0"
ucidef_set_interface_wan "eth1"

2
feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
View File

@@ -108,6 +108,7 @@ case "$FIRMWARE" in
qcom,ipq6018-cp01|\
xiaomi,ax1800|\
glinet,ax1800|\
plasmacloud,pax1800-v1|\
plasmacloud,pax1800-v2)
caldata_extract "0:ART" 0x1000 0x20000
;;
@@ -175,6 +176,7 @@ ath11k-macs)
cig,wf194c)
ath11k_generate_macs_wf194
;;
plasmacloud,pax1800-v1|\
plasmacloud,pax1800-v2)
ath11k_generate_macs_pax1800
;;

1
feeds/ipq807x/ipq807x/base-files/lib/upgrade/dualboot_datachk.sh
View File

@@ -63,6 +63,7 @@ platform_do_upgrade_dualboot_datachk() {
# boot anymore to Linux until it was reflashed with ap51-flash.
local next_boot_part="1"
case "$(board_name)" in
plasmacloud,pax1800-v1|\
plasmacloud,pax1800-v2)
primary_kernel_mtd=9
;;

2
feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh
View File

@@ -84,6 +84,7 @@ platform_check_image() {
edgecore,eap106|\
hfcl,ion4xi|\
hfcl,ion4xe|\
plasmacloud,pax1800-v1|\
plasmacloud,pax1800-v2|\
tplink,ex227|\
tplink,ex447|\
@@ -162,6 +163,7 @@ platform_do_upgrade() {
fi
nand_upgrade_tar "$1"
;;
plasmacloud,pax1800-v1|\
plasmacloud,pax1800-v2)
PART_NAME="inactive"
platform_do_upgrade_dualboot_datachk "$1"

18
feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-pax1800-v1.dts Normal file
View File

@@ -0,0 +1,18 @@
/*
* Copyright (c) 2019, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v1.dts"
#include "qcom-ipq6018.dtsi"

23
feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v1.dts Normal file
View File

@@ -0,0 +1,23 @@
/dts-v1/;
/*
* Copyright (c) 2019, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "qcom-ipq6018-pax1800.dtsi"
/ {
model = "Plasma Cloud PAX1800 v1";
compatible = "plasmacloud,pax1800-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
};

297
feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v2.dts
View File

@@ -15,304 +15,9 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "qcom-ipq6018.dtsi"
#include "qcom-ipq6018-rpm-regulator.dtsi"
#include "qcom-ipq6018-cpr-regulator.dtsi"
#include "qcom-ipq6018-cp-cpu.dtsi"
#include <dt-bindings/input/input.h>
#include "qcom-ipq6018-pax1800.dtsi"
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
model = "Plasma Cloud PAX1800 v2";
compatible = "plasmacloud,pax1800-v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
interrupt-parent = <&intc>;
qcom,msm-id = <0x1A5 0x0>;
chosen {
bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
bootargs-append = " swiotlb=1 coherent_pool=2M";
};
aliases {
serial0 = &blsp1_uart3;
/*
* Aliases as required by u-boot
* to patch MAC addresses
*/
ethernet0 = "/soc/dp1";
ethernet1 = "/soc/dp2";
led-boot = &led_status_green;
led-failsafe = &led_status_green;
led-running = &led_status_green;
led-upgrade = &led_status_green;
led-uplink = &led_status_blue;
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&leds_pins>;
pinctrl-names = "default";
status_red {
label = "red:status";
gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
led_status_green: status_green {
label = "green:status";
gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
};
led_status_blue: status_blue {
label = "blue:status";
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
watchdog {
compatible = "linux,wdt-gpio";
pinctrl-0 = <&watchdog_pins>;
pinctrl-names = "default";
gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
hw_margin_ms = <2000>;
always-running;
};
/*
* +=========+==============+========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +--------+--------------+-------------------------+
* | | | |
* | | | |
* | | | |
* | | | |
* | Linux | 0x41000000 | 139MB |
* | | | |
* | | | |
* | | | |
* +--------+--------------+-------------------------+
* | TZ App | 0x49B00000 | 6MB |
* +--------+--------------+-------------------------+
*
* From the available 145 MB for Linux in the first 256 MB,
* we are reserving 6 MB for TZAPP.
*
* Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
* for memory layout.
*/
/* TZAPP is enabled only in default memory profile */
#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
reserved-memory {
tzapp:tzapp@49B00000 { /* TZAPPS */
no-map;
reg = <0x0 0x49B00000 0x0 0x00600000>;
};
};
#endif
};
&tlmm {
uart_pins: uart_pins {
mux {
pins = "gpio44", "gpio45";
function = "blsp2_uart";
drive-strength = <8>;
bias-pull-down;
};
};
spi_0_pins: spi_0_pins {
mux {
pins = "gpio38", "gpio39", "gpio40", "gpio41";
function = "blsp0_spi";
drive-strength = <8>;
bias-pull-down;
};
};
button_pins: button_pins {
reset_button {
pins = "gpio24";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};
mdio_pins: mdio_pinmux {
mux_0 {
pins = "gpio64";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mux_1 {
pins = "gpio65";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
mux_2 {
pins = "gpio75";
function = "gpio";
bias-pull-up;
};
};
leds_pins: led_pinmux {
led_power_green {
pins = "gpio25";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_power_blue {
pins = "gpio35";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_power_red {
pins = "gpio37";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
};
watchdog_pins: watchdog_pinmux {
mux {
pins = "gpio67";
function = "gpio";
bias-none;
output-low;
};
};
};
&soc {
mdio@90000 {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 75 0>;
status = "ok";
phy0: ethernet-phy@0 {
reg = <3>;
};
phy1: ethernet-phy@1 {
reg = <4>;
};
};
ess-switch@3a000000 {
switch_cpu_bmp = <0x1>; /* cpu port bitmap */
switch_lan_bmp = <0x08>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
switch_inner_bmp = <0xc0>; /*inner port bitmap*/
switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
qcom,port_phyinfo {
port@3 {
port_id = <3>;
phy_address = <4>;
};
port@4 {
port_id = <4>;
phy_address = <3>;
};
};
};
dp1 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <3>;
reg = <0x3a001400 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <4>;
phy-mode = "sgmii";
};
dp2 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <4>;
reg = <0x3a001600 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <3>;
phy-mode = "sgmii";
};
};
&blsp1_uart3 {
pinctrl-0 = <&uart_pins>;
pinctrl-names = "default";
status = "ok";
};
&spi_0 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-select = <0>;
status = "ok";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "n25q128a11";
linux,modalias = "m25p80", "n25q128a11";
spi-max-frequency = <50000000>;
use-default-sizes;
};
};
&qpic_bam {
status = "ok";
};
&nss_crypto {
status = "ok";
};
/* TZAPP is enabled in default memory profile only */
#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
&qseecom {
mem-start = <0x49B00000>;
mem-size = <0x600000>;
status = "ok";
};
#endif
&wifi0 {
status = "okay";
qcom,ath11k-calibration-variant = "PlasmaCloud-PAX1800";
};

315
feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-pax1800.dtsi Normal file
View File

@@ -0,0 +1,315 @@
/*
* Copyright (c) 2019, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "qcom-ipq6018.dtsi"
#include "qcom-ipq6018-rpm-regulator.dtsi"
#include "qcom-ipq6018-cpr-regulator.dtsi"
#include "qcom-ipq6018-cp-cpu.dtsi"
#include <dt-bindings/input/input.h>
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
interrupt-parent = <&intc>;
qcom,msm-id = <0x1A5 0x0>;
chosen {
bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
bootargs-append = " swiotlb=1 coherent_pool=2M";
};
aliases {
serial0 = &blsp1_uart3;
/*
* Aliases as required by u-boot
* to patch MAC addresses
*/
ethernet0 = "/soc/dp1";
ethernet1 = "/soc/dp2";
led-boot = &led_status_green;
led-failsafe = &led_status_green;
led-running = &led_status_green;
led-upgrade = &led_status_green;
led-uplink = &led_status_blue;
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&leds_pins>;
pinctrl-names = "default";
status_red {
label = "red:status";
gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
led_status_green: status_green {
label = "green:status";
gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
};
led_status_blue: status_blue {
label = "blue:status";
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
watchdog {
compatible = "linux,wdt-gpio";
pinctrl-0 = <&watchdog_pins>;
pinctrl-names = "default";
gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
hw_margin_ms = <2000>;
always-running;
};
/*
* +=========+==============+========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +--------+--------------+-------------------------+
* | | | |
* | | | |
* | | | |
* | | | |
* | Linux | 0x41000000 | 139MB |
* | | | |
* | | | |
* | | | |
* +--------+--------------+-------------------------+
* | TZ App | 0x49B00000 | 6MB |
* +--------+--------------+-------------------------+
*
* From the available 145 MB for Linux in the first 256 MB,
* we are reserving 6 MB for TZAPP.
*
* Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
* for memory layout.
*/
/* TZAPP is enabled only in default memory profile */
#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
reserved-memory {
tzapp:tzapp@49B00000 { /* TZAPPS */
no-map;
reg = <0x0 0x49B00000 0x0 0x00600000>;
};
};
#endif
};
&tlmm {
uart_pins: uart_pins {
mux {
pins = "gpio44", "gpio45";
function = "blsp2_uart";
drive-strength = <8>;
bias-pull-down;
};
};
spi_0_pins: spi_0_pins {
mux {
pins = "gpio38", "gpio39", "gpio40", "gpio41";
function = "blsp0_spi";
drive-strength = <8>;
bias-pull-down;
};
};
button_pins: button_pins {
reset_button {
pins = "gpio24";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};
mdio_pins: mdio_pinmux {
mux_0 {
pins = "gpio64";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mux_1 {
pins = "gpio65";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
mux_2 {
pins = "gpio75";
function = "gpio";
bias-pull-up;
};
};
leds_pins: led_pinmux {
led_power_green {
pins = "gpio25";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_power_blue {
pins = "gpio35";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_power_red {
pins = "gpio37";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
};
watchdog_pins: watchdog_pinmux {
mux {
pins = "gpio67";
function = "gpio";
bias-none;
output-low;
};
};
};
&soc {
mdio@90000 {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 75 0>;
status = "ok";
phy0: ethernet-phy@0 {
reg = <3>;
};
phy1: ethernet-phy@1 {
reg = <4>;
};
};
ess-switch@3a000000 {
switch_cpu_bmp = <0x1>; /* cpu port bitmap */
switch_lan_bmp = <0x08>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
switch_inner_bmp = <0xc0>; /*inner port bitmap*/
switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
qcom,port_phyinfo {
port@3 {
port_id = <3>;
phy_address = <4>;
};
port@4 {
port_id = <4>;
phy_address = <3>;
};
};
};
dp1 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <3>;
reg = <0x3a001400 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <4>;
phy-mode = "sgmii";
};
dp2 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <4>;
reg = <0x3a001600 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <3>;
phy-mode = "sgmii";
};
};
&blsp1_uart3 {
pinctrl-0 = <&uart_pins>;
pinctrl-names = "default";
status = "ok";
};
&spi_0 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-select = <0>;
status = "ok";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "n25q128a11";
linux,modalias = "m25p80", "n25q128a11";
spi-max-frequency = <50000000>;
use-default-sizes;
};
};
&qpic_bam {
status = "ok";
};
&nss_crypto {
status = "ok";
};
/* TZAPP is enabled in default memory profile only */
#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
&qseecom {
mem-start = <0x49B00000>;
mem-size = <0x600000>;
status = "ok";
};
#endif
&wifi0 {
status = "okay";
qcom,ath11k-calibration-variant = "PlasmaCloud-PAX1800";
};

11
feeds/ipq807x/ipq807x/image/ipq60xx.mk
View File

@@ -101,6 +101,17 @@ define Device/plasmacloud_common_64k
KERNEL += | pad-to $$(BLOCKSIZE)
endef
define Device/plasmacloud_pax1800-v1
$(Device/plasmacloud_common_64k)
DEVICE_TITLE := Plasma Cloud PAX1800 v1
DEVICE_DTS := qcom-ipq6018-pax1800-v1
SUPPORTED_DEVICES := plasmacloud,pax1800-v1
DEVICE_DTS_CONFIG := config@cp03-c1
CE_TYPE := PAX1800
DEVICE_PACKAGES += ath11k-wifi-plasmacloud-pax1800
endef
TARGET_DEVICES += plasmacloud_pax1800-v1
define Device/plasmacloud_pax1800-v2
$(Device/plasmacloud_common_64k)
DEVICE_TITLE := Plasma Cloud PAX1800 v2