ipq807x: Add WF-660a support

Fixes: WIFI-12280
Signed-off-by: Ken <xshi@actiontec.com>

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -59,6 +59,9 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
+       cig,wf660a)
+                ucidef_set_interface_lan "eth0"		
+		;;
 	yuncore,fap650)
 		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
 		ucidef_set_interface_wan "eth4"

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -102,6 +102,7 @@ case "$FIRMWARE" in
 	case "$board" in
 	cig,wf188|\
 	cig,wf188n|\
+	cig,wf660a|\
 	edgecore,eap101|\
 	hfcl,ion4xi|\
 	hfcl,ion4x_2|\
@@ -190,6 +191,7 @@ ath11k-macs)
 	indio,um-310ax-v1|\
 	indio,um-510axp-v1|\
 	indio,um-510axm-v1|\
+	cig,wf660a|\
 	cig,wf188n)
 		ath11k_generate_macs
 		;;

feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh

@@ -50,6 +50,22 @@ do_flash_emmc() {
 	tar Oxf $tar_file ${board_dir}/$part | dd of=${emmcblock}
 }
 
+emmc_do_upgrade_cig() {
+        local tar_file="$1"
+
+        local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+        board_dir=${board_dir%/}
+	
+        do_flash_emmc $tar_file '0:HLOS_1' $board_dir kernel
+        do_flash_emmc $tar_file 'rootfs_1' $board_dir root
+
+        local emmcblock="$(find_mmc_part "rootfs_data")"
+        if [ -e "$emmcblock" ]; then
+                mkfs.ext4 -F "$emmcblock"
+        fi
+}
+
+
 emmc_do_upgrade() {
 	local tar_file="$1"
 
@@ -69,6 +85,7 @@ platform_check_image() {
 	board=$(board_name)
 	case $board in
 	cig,wf188|\
+	cig,wf660a|\
 	cig,wf188n|\
 	cig,wf194c|\
 	cig,wf194c4|\
@@ -118,6 +135,9 @@ platform_do_upgrade() {
 	cig,wf188)
 		qca_do_upgrade $1
 		;;
+	cig,wf660a)
+		emmc_do_upgrade_cig $1
+		;;
 	motorola,q14)
 		emmc_do_upgrade $1
 		;;

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-cig-wf660a.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a-cp01.dtsi

@@ -0,0 +1,590 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	compatible = "cig,wf660a", "qcom,ipq6018-cp01", "qcom,ipq6018";
+	interrupt-parent = <&intc>;
+	qcom,msm-id = <0x192 0x0>, <0x193 0x0>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart2;
+		sdhc1 = &sdhc_1;
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		ethernet2 = "/soc/dp3";
+		ethernet3 = "/soc/dp4";
+		ethernet4 = "/soc/dp5";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+#endif
+	};
+
+};
+
+&tlmm {
+	pinctrl-0 = <&sd_ldo_pins>;
+	pinctrl-names = "default";
+
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	sd_ldo_pins: sd_ldo_pins {
+		mux {
+			pins = "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-low;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_1_pins: spi_1_pins {
+		mux {
+			pins = "gpio69", "gpio71", "gpio72";
+			function = "blsp1_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		spi_cs {
+			pins = "gpio70";
+			function = "blsp1_spi";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		quartz_interrupt {
+			pins = "gpio78";
+			function = "gpio";
+			input;
+			bias-disable;
+		};
+		quartz_reset {
+			pins = "gpio79";
+			function = "gpio";
+			output-low;
+			bias-disable;
+		};
+
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		qpic_pad {
+			pins = "gpio1", "gpio3", "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	sd_pins: sd_pins {
+		mux {
+			pins = "gpio62";
+			function = "sd_card";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	extcon_usb_pins: extcon_usb_pins {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		reset_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+		mux_3 {
+			pins = "gpio77";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_5g {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_2g {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_usb0 {
+			pins = "gpio50";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	hsuart_pins: hsuart_pins {
+		mux {
+			pins = "gpio71", "gpio72";
+			function = "blsp1_uart";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	btcoex_pins: btcoex_pins {
+		mux_0 {
+			pins = "gpio51";
+			function = "pta1_1";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+		mux_1 {
+			pins = "gpio53";
+			function = "pta1_0";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+		mux_2 {
+			pins = "gpio52";
+			function = "pta1_2";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+	};
+	pwm_pins: pwm_pinmux {
+        mux_1 {
+                pins = "gpio22";
+                function = "pwm02";
+                drive-strength = <8>;
+        };
+		mux_2 {
+			pins = "gpio23";
+            function = "pwm12";
+            drive-strength = <8>;
+		};
+		mux_3 {
+			pins = "gpio24";
+            function = "pwm22";
+            drive-strength = <8>;
+		};
+		
+        };
+};
+
+&soc {
+	pwm {
+                pinctrl-0 = <&pwm_pins>;
+                pinctrl-names = "default";
+                used-pwm-indices = <1>, <1>, <1>, <0>;
+                status = "ok";
+        };
+	extcon_usb: extcon_usb {
+		pinctrl-0 = <&extcon_usb_pins>;
+		pinctrl-names = "default";
+		id-gpio = <&tlmm 26 GPIO_ACTIVE_LOW>;
+		status = "ok";
+	};
+
+	mdio: mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0 &tlmm 77 1>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+		};
+		phy4: ethernet-phy@4 {
+			reg = <0x1c>;
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <1>;
+		reg = <0x3a001000 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <0>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <2>;
+		reg = <0x3a001200 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <1>;
+		phy-mode = "sgmii";
+	};
+
+	dp3 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <2>;
+		phy-mode = "sgmii";
+	};
+
+	dp4 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <3>;
+		phy-mode = "sgmii";
+	};
+
+	dp5 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <5>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <28>;
+		phy-mode = "sgmii";
+	};
+
+	nss-macsec0 {
+		compatible = "qcom,nss-macsec";
+		phy_addr = <0x1c>;
+		phy_access_mode = <0>;
+		mdiobus = <&mdio>;
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x1e>; /* lan port bitmap */
+		switch_wan_bmp = <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@0 {
+				port_id = <1>;
+				phy_address = <0>;
+			};
+			port@1 {
+				port_id = <2>;
+				phy_address = <1>;
+			};
+			port@2 {
+				port_id = <3>;
+				phy_address = <2>;
+			};
+			port@3 {
+				port_id = <4>;
+				phy_address = <3>;
+			};
+			port@4 {
+				port_id = <5>;
+				phy_address = <0x1c>;
+				port_mac_sel = "QGMAC_PORT";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		reset {
+			label = "reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@35 {
+			label = "led_5g";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_5g";
+			default-state = "off";
+		};
+		led@37 {
+			label = "led_2g";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_2g";
+			default-state = "off";
+		};
+		led@50 {
+			label = "led_usb0";
+			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-host";
+			default-state = "off";
+		};
+	};
+
+i2c_4: i2c@78b9000 {
+	compatible = "qcom,i2c-qup-v2.2.1";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x78b9000 0x600>;
+	interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&gcc GCC_BLSP1_AHB_CLK>,<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+	clock-names = "iface", "core";
+	clock-frequency  = <100000>;
+	dmas = <&blsp_dma 21>, <&blsp_dma 20>;
+	dma-names = "rx", "tx";
+	status = "disabled";
+};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&hsuart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_1 { /* BLSP1 QUP1 */
+	pinctrl-0 = <&spi_1_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	quartz-reset-gpio = <&tlmm 79 1>;
+	status = "disabled";
+	spidev1: spi@1 {
+		compatible = "qca,spidev";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+	};
+};
+
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "disable";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&usb2 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&pcie_phy {
+	status = "ok";
+};
+
+&pcie0 {
+#if defined(__CNSS2__)
+	status = "ok";
+#endif
+};
+
+&qpic_lcd {
+	status = "ok";
+};
+
+&qpic_lcd_panel {
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a.dts

@@ -0,0 +1,120 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-cig-wf660a-cp01.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+
+/ {
+	model = "Cigtech WF-660a";
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	i2c_0_pins: i2c_0_pins {
+		mux {
+			pins = "gpio69", "gpio70";
+			function = "blsp1_i2c";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+	i2c_1_pins: i2c_1_pins {
+		mux {
+			pins = "gpio42", "gpio43";
+			function = "blsp2_i2c";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+	i2c_4_pins: i2c_4_pins {
+		mux {
+			pins = "gpio55", "gpio56";
+			function = "blsp4_i2c";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};	
+	
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_0_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+
+&i2c_1 {
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&i2c_4 {
+	pinctrl-0 = <&i2c_4_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&sdhc_1 {
+	status = "ok";
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif

feeds/ipq807x/ipq807x/image/ipq60xx.mk

@@ -2,6 +2,17 @@ KERNEL_LOADADDR := 0x41008000
 
 DEVICE_VARS += CE_TYPE
 
+define Device/cig_wf660a
+  DEVICE_TITLE := Cigtech WF-660a
+  DEVICE_DTS := qcom-ipq6018-cig-wf660a
+  SUPPORTED_DEVICES := cig,wf660a
+  DEVICE_DTS_CONFIG := config@cp01-c1
+  DEVICE_PACKAGES := ath11k-wifi-cig-wf660a uboot-env uboot-envtools
+  IMAGES := sysupgrade.tar mmc-factory.bin
+  IMAGE/mmc-factory.bin := append-ubi | qsdk-ipq-factory-mmc
+endef
+TARGET_DEVICES += cig_wf660a
+
 define Device/cig_wf188n
   DEVICE_TITLE := Cigtech WF-188n
   DEVICE_DTS := qcom-ipq6018-cig-wf188n

feeds/ucentral/ucentral-schema/files/etc/board.d/04-regdm

@@ -12,6 +12,7 @@ cig,wf194c4|\
 cig,wf194c|\
 cig,wf610d|\
 cig,wf808|\
+cig,wf660a|\
 cig,wf196)
 	ucidef_set_wifi_country 'US'
 	;;

feeds/wifi-ax/ath11k-wifi/Makefile

@@ -26,6 +26,7 @@ endef
 ALLWIFIBOARDS:= \
 	cig-wf188 \
 	cig-wf188n \
+	cig-wf660a \
 	cig-wf194c \
 	cig-wf194c4 \
 	cig-wf196 \
@@ -236,6 +237,7 @@ endef
 
 $(eval $(call generate-ath11k-wifi-package,cig-wf188,Cigtech WF188))
 $(eval $(call generate-ath11k-wifi-package,cig-wf188n,Cigtech WF188n))
+$(eval $(call generate-ath11k-wifi-package,cig-wf660a,Cigtech WF660a))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c,Cigtech WF194c))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c4,Cigtech WF194c4))
 $(eval $(call generate-ath11k-wifi-package,cig-wf196,Cigtech WF196))