ipq807x: add kernel modules Makefiles

Signed-off-by: John Crispin <john@phrozen.org>

feeds/ipq807x/linux/Makefile

@@ -0,0 +1,69 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=kernel
+PKG_FLAGS:=hold
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/packages
+SUBTARGETS = $(sort $(filter-out feeds,$(notdir $(wildcard $(TOPDIR)/target/linux/* $(TOPDIR)/target/linux/feeds/*))))
+SUBTARGET_MODULES = $(foreach t,$(SUBTARGETS),$(firstword $(wildcard $(TOPDIR)/target/linux/feeds/$(t)/modules.mk $(TOPDIR)/target/linux/$(t)/modules.mk)))
+SCAN_DEPS=modules/*.mk $(SUBTARGET_MODULES) $(TOPDIR)/include/netfilter-4.4.mk
+
+PKG_LICENSE:=GPL-2.0
+PKG_LICENSE_FILES:=
+
+export SHELL:=/bin/sh
+.ONESHELL:
+.SHELLFLAGS = -ec
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(DUMP),)
+  STAMP_BUILT:=$(STAMP_BUILT)_$(shell $(SCRIPT_DIR)/kconfig.pl $(LINUX_DIR)/.config | $(MKHASH) md5)
+  -include $(LINUX_DIR)/.config
+endif
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+endef
+
+define KernelPackage/depends
+endef
+
+CONFIG_PACKAGE_kernel=y
+define Package/kernel
+  SECTION:=sys
+  CATEGORY:=Kernel
+  DEFAULT:=y
+  TITLE:=Virtual kernel package
+  VERSION:=$(LINUX_VERSION)-$(LINUX_RELEASE)-$(LINUX_VERMAGIC)
+  URL:=http://www.kernel.org/
+  PKG_FLAGS:=nonshared
+  DEPENDS:=@!TARGET_ipq807x
+endef
+
+define Package/kernel/install
+  # nothing to do
+endef
+
+define Package/kernel/extra_provides
+	sed -e 's,.*/,,' $(LINUX_DIR)/modules.builtin;
+endef
+
+$(eval $(if $(DUMP),,$(call BuildPackage,kernel)))
+
+include $(sort $(wildcard ./modules/*.mk))
+-include $(SUBTARGET_MODULES)

feeds/ipq807x/linux/files/hotplug-sched-teql.sh

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+if [ "$ACTION" != "ifup" ]; then
+	exit
+fi
+
+config_load network
+
+config_get teql $INTERFACE teql
+
+if [ "$teql" != "" ]; then
+    logger Adding device $DEVICE to TEQL master $teql
+    modprobe sch_teql
+    tc qdisc add dev $DEVICE root $teql
+
+    # The kernel doesn't let us bring it up until it has at least one
+    # slave. So bring it up now, if it isn't already.
+    if ! cat /sys/class/net/$teql/carrier &>/dev/null; then
+        ifup $teql &
+    fi
+fi

feeds/ipq807x/linux/files/sysctl-br-netfilter.conf

@@ -0,0 +1,7 @@
+# Do not edit, changes to this file will be lost on upgrades
+# /etc/sysctl.conf can be used to customize sysctl settings
+
+# disable bridge firewalling by default
+net.bridge.bridge-nf-call-arptables=0
+net.bridge.bridge-nf-call-ip6tables=0
+net.bridge.bridge-nf-call-iptables=0

feeds/ipq807x/linux/files/sysctl-nf-conntrack.conf

@@ -0,0 +1,8 @@
+# Do not edit, changes to this file will be lost on upgrades
+# /etc/sysctl.conf can be used to customize sysctl settings
+
+net.netfilter.nf_conntrack_acct=1
+net.netfilter.nf_conntrack_checksum=0
+net.netfilter.nf_conntrack_tcp_timeout_established=7440
+net.netfilter.nf_conntrack_udp_timeout=60
+net.netfilter.nf_conntrack_udp_timeout_stream=180

feeds/ipq807x/linux/files/sysctl-tcp-bbr.conf

@@ -0,0 +1,4 @@
+# Do not edit, changes to this file will be lost on upgrades
+# /etc/sysctl.conf can be used to customize sysctl settings
+
+net.ipv4.tcp_congestion_control=bbr

feeds/ipq807x/linux/modules/001-depends.mk

@@ -0,0 +1,14 @@
+#
+# Copyright (C) 2010-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define AddDepends/nls
+  DEPENDS+= +kmod-nls-base $(foreach cp,$(1),+kmod-nls-$(cp))
+endef
+
+define AddDepends/rfkill
+  DEPENDS+= +USE_RFKILL:kmod-rfkill $(1)
+endef

feeds/ipq807x/linux/modules/block.mk

@@ -0,0 +1,589 @@
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+BLOCK_MENU:=Block Devices
+
+define KernelPackage/aoe
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=ATA over Ethernet support
+  KCONFIG:=CONFIG_ATA_OVER_ETH
+  FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
+  AUTOLOAD:=$(call AutoLoad,30,aoe)
+endef
+
+define KernelPackage/aoe/description
+ Kernel support for ATA over Ethernet
+endef
+
+$(eval $(call KernelPackage,aoe))
+
+
+define KernelPackage/ata-core
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Serial and Parallel ATA support
+  DEPENDS:=@PCI_SUPPORT||TARGET_sunxi +kmod-scsi-core
+  KCONFIG:=CONFIG_ATA
+  FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
+ifneq ($(wildcard $(LINUX_DIR)/drivers/ata/libahci.ko),)
+  FILES+=$(LINUX_DIR)/drivers/ata/libahci.ko
+endif
+endef
+
+$(eval $(call KernelPackage,ata-core))
+
+
+define AddDepends/ata
+  SUBMENU:=$(BLOCK_MENU)
+  DEPENDS+=+kmod-ata-core $(1)
+endef
+
+
+define KernelPackage/ata-ahci
+  TITLE:=AHCI Serial ATA support
+  KCONFIG:=CONFIG_SATA_AHCI
+  FILES:= \
+    $(LINUX_DIR)/drivers/ata/ahci.ko
+  AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-ahci/description
+ Support for AHCI Serial ATA controllers
+endef
+
+$(eval $(call KernelPackage,ata-ahci))
+
+
+define KernelPackage/ata-ahci-platform
+  TITLE:=AHCI Serial ATA Platform support
+  KCONFIG:=CONFIG_SATA_AHCI_PLATFORM
+  FILES:= \
+    $(LINUX_DIR)/drivers/ata/ahci_platform.ko \
+    $(LINUX_DIR)/drivers/ata/libahci_platform.ko
+  AUTOLOAD:=$(call AutoLoad,40,libahci libahci_platform ahci_platform,1)
+  $(call AddDepends/ata,@TARGET_ipq806x||TARGET_layerscape||TARGET_sunxi)
+endef
+
+define KernelPackage/ata-ahci-platform/description
+ Platform support for AHCI Serial ATA controllers
+endef
+
+$(eval $(call KernelPackage,ata-ahci-platform))
+
+
+define KernelPackage/ata-artop
+  TITLE:=ARTOP 6210/6260 PATA support
+  KCONFIG:=CONFIG_PATA_ARTOP
+  FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
+  AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-artop/description
+ PATA support for ARTOP 6210/6260 host controllers
+endef
+
+$(eval $(call KernelPackage,ata-artop))
+
+
+define KernelPackage/ata-marvell-sata
+  TITLE:=Marvell Serial ATA support
+  KCONFIG:=CONFIG_SATA_MV
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-marvell-sata/description
+ SATA support for marvell chipsets
+endef
+
+$(eval $(call KernelPackage,ata-marvell-sata))
+
+
+define KernelPackage/ata-nvidia-sata
+  TITLE:=Nvidia Serial ATA support
+  KCONFIG:=CONFIG_SATA_NV
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
+  $(call AddDepends/ata)
+endef
+
+$(eval $(call KernelPackage,ata-nvidia-sata))
+
+
+define KernelPackage/ata-pdc202xx-old
+  TITLE:=Older Promise PATA controller support
+  KCONFIG:= \
+       CONFIG_ATA_SFF=y \
+       CONFIG_PATA_PDC_OLD
+  FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
+  AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-pdc202xx-old/description
+ This option enables support for the Promise 20246, 20262, 20263,
+ 20265 and 20267 adapters
+endef
+
+$(eval $(call KernelPackage,ata-pdc202xx-old))
+
+
+define KernelPackage/ata-piix
+  TITLE:=Intel PIIX PATA/SATA support
+  KCONFIG:=CONFIG_ATA_PIIX
+  FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
+  AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-piix/description
+ SATA support for Intel ICH5/6/7/8 series host controllers and
+ PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers
+endef
+
+$(eval $(call KernelPackage,ata-piix))
+
+
+define KernelPackage/ata-sil
+  TITLE:=Silicon Image SATA support
+  KCONFIG:=CONFIG_SATA_SIL
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-sil/description
+ Support for Silicon Image Serial ATA controllers
+endef
+
+$(eval $(call KernelPackage,ata-sil))
+
+
+define KernelPackage/ata-sil24
+  TITLE:=Silicon Image 3124/3132 SATA support
+  KCONFIG:=CONFIG_SATA_SIL24
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-sil24/description
+ Support for Silicon Image 3124/3132 Serial ATA controllers
+endef
+
+$(eval $(call KernelPackage,ata-sil24))
+
+
+define KernelPackage/ata-via-sata
+  TITLE:=VIA SATA support
+  KCONFIG:=CONFIG_SATA_VIA
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-via-sata/description
+ This option enables support for VIA Serial ATA
+endef
+
+$(eval $(call KernelPackage,ata-via-sata))
+
+
+define KernelPackage/block2mtd
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Block device MTD emulation
+  KCONFIG:=CONFIG_MTD_BLOCK2MTD
+  FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
+endef
+
+$(eval $(call KernelPackage,block2mtd))
+
+
+define KernelPackage/dax
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=DAX: direct access to differentiated memory
+  KCONFIG:=CONFIG_DAX
+  FILES:=$(LINUX_DIR)/drivers/dax/dax.ko
+endef
+
+$(eval $(call KernelPackage,dax))
+
+
+define KernelPackage/dm
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Device Mapper
+  DEPENDS:=+kmod-crypto-manager +kmod-dax
+  # All the "=n" are unnecessary, they're only there
+  # to stop the config from asking the question.
+  # MIRROR is M because I've needed it for pvmove.
+  KCONFIG:= \
+	CONFIG_BLK_DEV_MD=n \
+	CONFIG_DM_DEBUG=n \
+	CONFIG_DM_UEVENT=n \
+	CONFIG_DM_DELAY=n \
+	CONFIG_DM_LOG_WRITES=n \
+	CONFIG_DM_MQ_DEFAULT=n \
+	CONFIG_DM_MULTIPATH=n \
+	CONFIG_DM_ZERO=n \
+	CONFIG_DM_SNAPSHOT=n \
+	CONFIG_DM_LOG_USERSPACE=n \
+	CONFIG_MD=y \
+	CONFIG_BLK_DEV_DM \
+	CONFIG_DM_CRYPT \
+	CONFIG_DM_MIRROR
+  FILES:= \
+    $(LINUX_DIR)/drivers/md/dm-mod.ko \
+    $(LINUX_DIR)/drivers/md/dm-crypt.ko \
+    $(LINUX_DIR)/drivers/md/dm-log.ko \
+    $(LINUX_DIR)/drivers/md/dm-mirror.ko \
+    $(LINUX_DIR)/drivers/md/dm-region-hash.ko
+  AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
+endef
+
+define KernelPackage/dm/description
+ Kernel module necessary for LVM2 support
+endef
+
+$(eval $(call KernelPackage,dm))
+
+define KernelPackage/dm-raid
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=LVM2 raid support
+  DEPENDS:=+kmod-dm +kmod-md-mod \
+           +kmod-md-raid0 +kmod-md-raid1 +kmod-md-raid10 +kmod-md-raid456
+  KCONFIG:= \
+	CONFIG_DM_RAID
+  FILES:=$(LINUX_DIR)/drivers/md/dm-raid.ko
+  AUTOLOAD:=$(call AutoLoad,31,dm-raid)
+endef
+
+define KernelPackage/dm-raid/description
+ Kernel module necessary for LVM2 raid support
+endef
+
+$(eval $(call KernelPackage,dm-raid))
+
+
+define KernelPackage/iscsi-initiator
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=iSCSI Initiator over TCP/IP
+  DEPENDS:=+kmod-scsi-core +kmod-crypto-hash
+  KCONFIG:= \
+	CONFIG_INET \
+	CONFIG_SCSI_LOWLEVEL=y \
+	CONFIG_ISCSI_TCP \
+	CONFIG_SCSI_ISCSI_ATTRS=y
+  FILES:= \
+	$(LINUX_DIR)/drivers/scsi/iscsi_tcp.ko \
+	$(LINUX_DIR)/drivers/scsi/libiscsi.ko \
+	$(LINUX_DIR)/drivers/scsi/libiscsi_tcp.ko \
+	$(LINUX_DIR)/drivers/scsi/scsi_transport_iscsi.ko
+  AUTOLOAD:=$(call AutoProbe,libiscsi libiscsi_tcp scsi_transport_iscsi iscsi_tcp)
+endef
+
+define KernelPackage/iscsi-initiator/description
+The iSCSI Driver provides a host with the ability to access storage through an
+IP network. The driver uses the iSCSI protocol to transport SCSI requests and
+responses over a TCP/IP network between the host (the "initiator") and "targets".
+endef
+
+$(eval $(call KernelPackage,iscsi-initiator))
+
+
+define KernelPackage/md-mod
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=MD RAID
+  KCONFIG:= \
+       CONFIG_MD=y \
+       CONFIG_BLK_DEV_MD=m \
+       CONFIG_MD_AUTODETECT=y \
+       CONFIG_MD_FAULTY=n
+  FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
+  AUTOLOAD:=$(call AutoLoad,27,md-mod)
+endef
+
+define KernelPackage/md-mod/description
+ Kernel RAID md module (md-mod.ko).
+ You will need to select at least one RAID level module below.
+endef
+
+$(eval $(call KernelPackage,md-mod))
+
+
+define KernelPackage/md/Depends
+  SUBMENU:=$(BLOCK_MENU)
+  DEPENDS:=kmod-md-mod $(1)
+endef
+
+
+define KernelPackage/md-linear
+$(call KernelPackage/md/Depends,)
+  TITLE:=RAID Linear Module
+  KCONFIG:=CONFIG_MD_LINEAR
+  FILES:=$(LINUX_DIR)/drivers/md/linear.ko
+  AUTOLOAD:=$(call AutoLoad,28,linear)
+endef
+
+define KernelPackage/md-linear/description
+ RAID "Linear" or "Append" driver module (linear.ko)
+endef
+
+$(eval $(call KernelPackage,md-linear))
+
+
+define KernelPackage/md-raid0
+$(call KernelPackage/md/Depends,)
+  TITLE:=RAID0 Module
+  KCONFIG:=CONFIG_MD_RAID0
+  FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
+  AUTOLOAD:=$(call AutoLoad,28,raid0)
+endef
+
+define KernelPackage/md-raid0/description
+ RAID Level 0 (Striping) driver module (raid0.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid0))
+
+
+define KernelPackage/md-raid1
+$(call KernelPackage/md/Depends,)
+  TITLE:=RAID1 Module
+  KCONFIG:=CONFIG_MD_RAID1
+  FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
+  AUTOLOAD:=$(call AutoLoad,28,raid1)
+endef
+
+define KernelPackage/md-raid1/description
+ RAID Level 1 (Mirroring) driver (raid1.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid1))
+
+
+define KernelPackage/md-raid10
+$(call KernelPackage/md/Depends,)
+  TITLE:=RAID10 Module
+  KCONFIG:=CONFIG_MD_RAID10
+  FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
+  AUTOLOAD:=$(call AutoLoad,28,raid10)
+endef
+
+define KernelPackage/md-raid10/description
+ RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid10))
+
+
+define KernelPackage/md-raid456
+$(call KernelPackage/md/Depends,+kmod-lib-raid6 +kmod-lib-xor +kmod-lib-crc32c)
+  TITLE:=RAID Level 456 Driver
+  KCONFIG:= \
+       CONFIG_ASYNC_CORE \
+       CONFIG_ASYNC_MEMCPY \
+       CONFIG_ASYNC_XOR \
+       CONFIG_ASYNC_PQ \
+       CONFIG_ASYNC_RAID6_RECOV \
+       CONFIG_ASYNC_RAID6_TEST=n \
+       CONFIG_MD_RAID456 \
+       CONFIG_MULTICORE_RAID456=n
+  FILES:= \
+	$(LINUX_DIR)/crypto/async_tx/async_tx.ko \
+	$(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
+	$(LINUX_DIR)/crypto/async_tx/async_xor.ko \
+	$(LINUX_DIR)/crypto/async_tx/async_pq.ko \
+	$(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
+	$(LINUX_DIR)/drivers/md/raid456.ko
+  AUTOLOAD:=$(call AutoLoad,28, async_tx async_memcpy async_xor async_pq async_raid6_recov raid456)
+endef
+
+define KernelPackage/md-raid456/description
+ RAID Level 4,5,6 kernel module (raid456.ko)
+
+ Includes the following modules required by
+ raid456.ko:
+    xor.ko
+    async_tx.ko
+    async_xor.ko
+    async_memcpy.ko
+    async_pq.ko
+    async_raid5_recov.ko
+    raid6_pq.ko
+endef
+
+$(eval $(call KernelPackage,md-raid456))
+
+
+define KernelPackage/md-multipath
+$(call KernelPackage/md/Depends,)
+  TITLE:=MD Multipath Module
+  KCONFIG:=CONFIG_MD_MULTIPATH
+  FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
+  AUTOLOAD:=$(call AutoLoad,29,multipath)
+endef
+
+define KernelPackage/md-multipath/description
+ Multipath driver module (multipath.ko)
+endef
+
+$(eval $(call KernelPackage,md-multipath))
+
+
+define KernelPackage/libsas
+  SUBMENU:=$(BLOCK_MENU)
+  DEPENDS:=@TARGET_x86
+  TITLE:=SAS Domain Transport Attributes
+  KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
+	CONFIG_SCSI_SAS_ATTRS \
+	CONFIG_SCSI_SAS_ATA=y \
+	CONFIG_SCSI_SAS_HOST_SMP=y \
+	CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+  FILES:= \
+	$(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
+	$(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
+  AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
+endef
+
+define KernelPackage/libsas/description
+ SAS Domain Transport Attributes support
+endef
+
+$(eval $(call KernelPackage,libsas,1))
+
+
+define KernelPackage/loop
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Loopback device support
+  KCONFIG:= \
+	CONFIG_BLK_DEV_LOOP \
+	CONFIG_BLK_DEV_CRYPTOLOOP=n
+  FILES:=$(LINUX_DIR)/drivers/block/loop.ko
+  AUTOLOAD:=$(call AutoLoad,30,loop)
+endef
+
+define KernelPackage/loop/description
+ Kernel module for loopback device support
+endef
+
+$(eval $(call KernelPackage,loop))
+
+
+define KernelPackage/mvsas
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Marvell 88SE6440 SAS/SATA driver
+  DEPENDS:=@TARGET_x86 +kmod-libsas
+  KCONFIG:= \
+	CONFIG_SCSI_MVSAS \
+	CONFIG_SCSI_MVSAS_TASKLET=n
+  FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
+  AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
+endef
+
+define KernelPackage/mvsas/description
+ Kernel support for the Marvell SAS SCSI adapters
+endef
+
+$(eval $(call KernelPackage,mvsas))
+
+
+define KernelPackage/nbd
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Network block device support
+  KCONFIG:=CONFIG_BLK_DEV_NBD
+  FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
+  AUTOLOAD:=$(call AutoLoad,30,nbd)
+endef
+
+define KernelPackage/nbd/description
+ Kernel module for network block device support
+endef
+
+$(eval $(call KernelPackage,nbd))
+
+
+define KernelPackage/scsi-core
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=SCSI device support
+  KCONFIG:= \
+	CONFIG_SCSI \
+	CONFIG_BLK_DEV_SD
+  FILES:= \
+	$(LINUX_DIR)/drivers/scsi/scsi_mod.ko \
+	$(LINUX_DIR)/drivers/scsi/sd_mod.ko
+  AUTOLOAD:=$(call AutoLoad,40,scsi_mod sd_mod,1)
+endef
+
+$(eval $(call KernelPackage,scsi-core))
+
+
+define KernelPackage/scsi-generic
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Kernel support for SCSI generic
+  DEPENDS:=+kmod-scsi-core
+  KCONFIG:= \
+	CONFIG_CHR_DEV_SG
+  FILES:= \
+	$(LINUX_DIR)/drivers/scsi/sg.ko
+  AUTOLOAD:=$(call AutoLoad,65,sg)
+endef
+
+$(eval $(call KernelPackage,scsi-generic))
+
+
+define KernelPackage/cdrom
+  TITLE:=Kernel library module for CD / DVD drives
+  KCONFIG:=CONFIG_CDROM
+  HIDDEN:=1
+  FILES:=$(LINUX_DIR)/drivers/cdrom/cdrom.ko
+endef
+
+$(eval $(call KernelPackage,cdrom))
+
+
+define KernelPackage/scsi-cdrom
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Kernel support for CD / DVD drives
+  DEPENDS:=+kmod-scsi-core +kmod-cdrom
+  KCONFIG:= \
+    CONFIG_BLK_DEV_SR \
+    CONFIG_BLK_DEV_SR_VENDOR=n
+  FILES:=$(LINUX_DIR)/drivers/scsi/sr_mod.ko
+  AUTOLOAD:=$(call AutoLoad,45,sr_mod)
+endef
+
+$(eval $(call KernelPackage,scsi-cdrom))
+
+
+define KernelPackage/scsi-tape
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Kernel support for scsi tape drives
+  DEPENDS:=+kmod-scsi-core
+  KCONFIG:= \
+    CONFIG_CHR_DEV_ST
+  FILES:= \
+    $(LINUX_DIR)/drivers/scsi/st.ko
+  AUTOLOAD:=$(call AutoLoad,45,st)
+endef
+
+$(eval $(call KernelPackage,scsi-tape))
+
+define KernelPackage/iosched-bfq
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Kernel support for BFQ I/O scheduler
+  KCONFIG:= \
+    CONFIG_IOSCHED_BFQ \
+    CONFIG_BFQ_GROUP_IOSCHED=y \
+    CONFIG_BFQ_CGROUP_DEBUG=n
+  FILES:= \
+    $(LINUX_DIR)/block/bfq.ko
+  AUTOLOAD:=$(call AutoLoad,10,bfq)
+endef
+
+$(eval $(call KernelPackage,iosched-bfq))

feeds/ipq807x/linux/modules/can.mk

@@ -0,0 +1,309 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+CAN_MENU:=CAN Support
+
+define KernelPackage/can
+  SUBMENU:=$(CAN_MENU)
+  TITLE:=CAN bus support
+  KCONFIG:=\
+	CONFIG_CAN=m \
+	CONFIG_CAN_DEV \
+	CONFIG_CAN_CALC_BITTIMING=y \
+	CONFIG_CAN_LEDS=y \
+	CONFIG_CAN_AT91=n \
+	CONFIG_CAN_TI_HECC=n \
+	CONFIG_CAN_MCP251X=n \
+	CONFIG_CAN_BFIN=n \
+	CONFIG_CAN_JANZ_ICAN3=n \
+	CONFIG_PCH_CAN=n \
+	CONFIG_CAN_GRCAN=n \
+	CONFIG_CAN_CC770=n \
+	CONFIG_CAN_MSCAN=n \
+	CONFIG_CAN_SJA1000=n \
+	CONFIG_CAN_SOFTING=n \
+	CONFIG_NET_EMATCH_CANID=n \
+	CONFIG_CAN_DEBUG_DEVICES=n
+  FILES:=$(LINUX_DIR)/drivers/net/can/dev/can-dev.ko \
+	 $(LINUX_DIR)/net/can/can.ko
+  AUTOLOAD:=$(call AutoProbe,can can-dev)
+endef
+
+define KernelPackage/can/description
+ Kernel module for CAN bus support.
+endef
+
+$(eval $(call KernelPackage,can))
+
+
+define AddDepends/can
+  SUBMENU:=$(CAN_MENU)
+  DEPENDS+=kmod-can $(1)
+endef
+
+
+define KernelPackage/can-bcm
+  TITLE:=Broadcast Manager CAN Protcol
+  KCONFIG:=CONFIG_CAN_BCM
+  FILES:=$(LINUX_DIR)/net/can/can-bcm.ko
+  AUTOLOAD:=$(call AutoProbe,can-bcm)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-bcm/description
+ The Broadcast Manager offers content filtering, timeout monitoring,
+ sending of RTR frames, and cyclic CAN messages without permanent user
+ interaction.
+endef
+
+$(eval $(call KernelPackage,can-bcm))
+
+
+define KernelPackage/can-c-can
+  TITLE:=BOSCH C_CAN/D_CAN drivers
+  KCONFIG:=CONFIG_CAN_C_CAN
+  FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can.ko
+  AUTOLOAD:=$(call AutoProbe,c_can)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-c-can/description
+ This driver adds generic support for the C_CAN/D_CAN chips.
+endef
+
+$(eval $(call KernelPackage,can-c-can))
+
+
+define KernelPackage/can-c-can-pci
+  TITLE:=PCI Bus based BOSCH C_CAN/D_CAN driver
+  KCONFIG:=CONFIG_CAN_C_CAN_PCI
+  DEPENDS:=kmod-can-c-can @PCI_SUPPORT
+  FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_pci.ko
+  AUTOLOAD:=$(call AutoProbe,c_can_pci)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-c-can-pci/description
+ This driver adds support for the C_CAN/D_CAN chips connected
+ to the PCI bus.
+endef
+
+$(eval $(call KernelPackage,can-c-can-pci))
+
+
+define KernelPackage/can-c-can-platform
+  TITLE:=Platform Bus based BOSCH C_CAN/D_CAN driver
+  KCONFIG:=CONFIG_CAN_C_CAN_PLATFORM
+  DEPENDS:=kmod-can-c-can +kmod-regmap-core
+  FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_platform.ko
+  AUTOLOAD:=$(call AutoProbe,c_can_platform)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-c-can-platform/description
+ This driver adds support for the C_CAN/D_CAN chips connected
+ to the "platform bus" (Linux abstraction for directly to the
+ processor attached devices) which can be found on various
+ boards from ST Microelectronics (http://www.st.com) like the
+ SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
+ boards like am335x, dm814x, dm813x and dm811x.
+endef
+
+$(eval $(call KernelPackage,can-c-can-platform))
+
+
+define KernelPackage/can-flexcan
+  TITLE:=Support for Freescale FLEXCAN based chips
+  KCONFIG:=CONFIG_CAN_FLEXCAN
+  FILES:=$(LINUX_DIR)/drivers/net/can/flexcan.ko
+  AUTOLOAD:=$(call AutoProbe,flexcan)
+  $(call AddDepends/can,@TARGET_imx6)
+endef
+
+define KernelPackage/can-flexcan/description
+ Freescale FLEXCAN CAN bus controller implementation.
+endef
+
+$(eval $(call KernelPackage,can-flexcan))
+
+
+define KernelPackage/can-gw
+  TITLE:=CAN Gateway/Router
+  KCONFIG:=CONFIG_CAN_GW
+  FILES:=$(LINUX_DIR)/net/can/can-gw.ko
+  AUTOLOAD:=$(call AutoProbe,can-gw)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-gw/description
+ The CAN Gateway/Router is used to route (and modify) CAN frames.
+endef
+
+$(eval $(call KernelPackage,can-gw))
+
+
+define KernelPackage/can-mcp251x
+  TITLE:=MCP251x SPI CAN controller
+  KCONFIG:=\
+	CONFIG_SPI=y \
+	CONFIG_CAN_MCP251X
+  FILES:=$(LINUX_DIR)/drivers/net/can/spi/mcp251x.ko
+  AUTOLOAD:=$(call AutoProbe,can-mcp251x)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-mcp251x/description
+ Microchip MCP251x SPI CAN controller
+endef
+
+$(eval $(call KernelPackage,can-mcp251x))
+
+
+define KernelPackage/can-raw
+  TITLE:=Raw CAN Protcol
+  KCONFIG:=CONFIG_CAN_RAW
+  FILES:=$(LINUX_DIR)/net/can/can-raw.ko
+  AUTOLOAD:=$(call AutoProbe,can-raw)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-raw/description
+ The raw CAN protocol option offers access to the CAN bus via
+ the BSD  socket API.
+endef
+
+$(eval $(call KernelPackage,can-raw))
+
+
+define KernelPackage/can-slcan
+  TITLE:=Serial / USB serial CAN Adaptors (slcan)
+  KCONFIG:=CONFIG_CAN_SLCAN
+  FILES:=$(LINUX_DIR)/drivers/net/can/slcan.ko
+  AUTOLOAD:=$(call AutoProbe,slcan)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-slcan/description
+ CAN driver for several 'low cost' CAN interfaces that are attached
+ via serial lines or via USB-to-serial adapters using the LAWICEL
+ ASCII protocol.
+endef
+
+$(eval $(call KernelPackage,can-slcan))
+
+
+define KernelPackage/can-usb-8dev
+  TITLE:=8 devices USB2CAN interface
+  KCONFIG:=CONFIG_CAN_8DEV_USB
+  FILES:=$(LINUX_DIR)/drivers/net/can/usb/usb_8dev.ko
+  AUTOLOAD:=$(call AutoProbe,usb_8dev)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-8dev/description
+ This driver supports the USB2CAN interface
+ from 8 devices (http://www.8devices.com).
+endef
+
+$(eval $(call KernelPackage,can-usb-8dev))
+
+
+define KernelPackage/can-usb-ems
+  TITLE:=EMS CPC-USB/ARM7 CAN/USB interface
+  KCONFIG:=CONFIG_CAN_EMS_USB
+  FILES:=$(LINUX_DIR)/drivers/net/can/usb/ems_usb.ko
+  AUTOLOAD:=$(call AutoProbe,ems_usb)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-ems/description
+ This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+ from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+endef
+
+$(eval $(call KernelPackage,can-usb-ems))
+
+
+define KernelPackage/can-usb-esd
+  TITLE:=ESD USB/2 CAN/USB interface
+  KCONFIG:=CONFIG_CAN_ESD_USB2
+  FILES:=$(LINUX_DIR)/drivers/net/can/usb/esd_usb2.ko
+  AUTOLOAD:=$(call AutoProbe,esd_usb2)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-esd/description
+ This driver supports the CAN-USB/2 interface
+ from esd electronic system design gmbh (http://www.esd.eu).
+endef
+
+$(eval $(call KernelPackage,can-usb-esd))
+
+
+define KernelPackage/can-usb-kvaser
+  TITLE:=Kvaser CAN/USB interface
+  KCONFIG:=CONFIG_CAN_KVASER_USB
+  FILES:= \
+	$(LINUX_DIR)/drivers/net/can/usb/kvaser_usb.ko@lt4.19 \
+	$(LINUX_DIR)/drivers/net/can/usb/kvaser_usb/kvaser_usb.ko@ge4.19
+  AUTOLOAD:=$(call AutoProbe,kvaser_usb)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-kvaser/description
+ This driver adds support for Kvaser CAN/USB devices like Kvaser
+ Leaf Light.
+endef
+
+$(eval $(call KernelPackage,can-usb-kvaser))
+
+
+define KernelPackage/can-usb-peak
+  TITLE:=PEAK PCAN-USB/USB Pro interfaces
+  KCONFIG:=CONFIG_CAN_PEAK_USB
+  FILES:=$(LINUX_DIR)/drivers/net/can/usb/peak_usb/peak_usb.ko
+  AUTOLOAD:=$(call AutoProbe,peak_usb)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-peak/description
+ This driver supports the PCAN-USB and PCAN-USB Pro adapters
+ from PEAK-System Technik (http://www.peak-system.com).
+endef
+
+$(eval $(call KernelPackage,can-usb-peak))
+
+
+define KernelPackage/can-vcan
+  TITLE:=Virtual Local CAN Interface (vcan)
+  KCONFIG:=CONFIG_CAN_VCAN
+  FILES:=$(LINUX_DIR)/drivers/net/can/vcan.ko
+  AUTOLOAD:=$(call AutoProbe,vcan)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-vcan/description
+ Similar to the network loopback devices, vcan offers a
+ virtual local CAN interface.
+endef
+
+$(eval $(call KernelPackage,can-vcan))
+
+define KernelPackage/can-xilinx-can
+  TITLE:=Xilinx CAN IP
+  KCONFIG:=CONFIG_CAN_XILINXCAN
+  FILES:=$(LINUX_DIR)/drivers/net/can/xilinx_can.ko
+  AUTOLOAD:=$(call AutoProbe,xilinx_can)
+  $(call AddDepends/can,@TARGET_zynq)
+endef
+
+define KernelPackage/can-xilinx-can/description
+ Xilinx CAN driver. This driver supports both
+ soft AXI CAN IP and Zynq CANPS IP.
+endef
+
+$(eval $(call KernelPackage,can-xilinx-can))

feeds/ipq807x/linux/modules/firewire.mk

@@ -0,0 +1,76 @@
+#
+# Copyright (C) 2008-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+FIREWIRE_MENU:=FireWire support
+
+define KernelPackage/firewire
+  SUBMENU:=$(FIREWIRE_MENU)
+  TITLE:=Support for FireWire (new stack)
+  DEPENDS:=@PCI_SUPPORT +kmod-lib-crc-itu-t
+  KCONFIG:=CONFIG_FIREWIRE
+  FILES:=$(LINUX_DIR)/drivers/firewire/firewire-core.ko
+endef
+
+define KernelPackage/firewire/description
+ Kernel support for FireWire (new stack)
+endef
+
+$(eval $(call KernelPackage,firewire))
+
+
+define KernelPackage/firewire-net
+  SUBMENU:=$(FIREWIRE_MENU)
+  TITLE:=Support for IP networking over FireWire
+  DEPENDS:=kmod-firewire
+  KCONFIG:=CONFIG_FIREWIRE_NET
+  FILES:=$(LINUX_DIR)/drivers/firewire/firewire-net.ko
+  AUTOLOAD:=$(call AutoProbe,firewire-net)
+endef
+
+define KernelPackage/firewire-net/description
+ Kernel support for IPv4 over FireWire
+endef
+
+$(eval $(call KernelPackage,firewire-net))
+
+
+define KernelPackage/firewire-ohci
+  SUBMENU:=$(FIREWIRE_MENU)
+  TITLE:=Support for OHCI-1394 controllers
+  DEPENDS:=kmod-firewire
+  KCONFIG:= \
+	CONFIG_FIREWIRE_OHCI \
+	CONFIG_FIREWIRE_OHCI_DEBUG=n \
+	CONFIG_FIREWIRE_OHCI_REMOTE_DMA=n
+  FILES:=$(LINUX_DIR)/drivers/firewire/firewire-ohci.ko
+  AUTOLOAD:=$(call AutoProbe,firewire-ohci)
+endef
+
+
+define KernelPackage/firewire-ohci/description
+ Kernel support for FireWire OHCI-1394 controllers
+endef
+
+$(eval $(call KernelPackage,firewire-ohci))
+
+
+define KernelPackage/firewire-sbp2
+  SUBMENU:=$(FIREWIRE_MENU)
+  TITLE:=Support for SBP-2 devices over FireWire
+  DEPENDS:=kmod-firewire +kmod-scsi-core
+  KCONFIG:=CONFIG_FIREWIRE_SBP2
+  FILES:=$(LINUX_DIR)/drivers/firewire/firewire-sbp2.ko
+  AUTOLOAD:=$(call AutoProbe,firewire-sbp2)
+endef
+
+define KernelPackage/firewire-sbp2/description
+ Kernel support for SBP-2 devices over FireWire
+endef
+
+$(eval $(call KernelPackage,firewire-sbp2))
+
+

feeds/ipq807x/linux/modules/fs.mk

@@ -0,0 +1,578 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+FS_MENU:=Filesystems
+
+define KernelPackage/fs-9p
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Plan 9 Resource Sharing Support
+  DEPENDS:=+kmod-9pnet
+  KCONFIG:=\
+	CONFIG_9P_FS \
+	CONFIG_9P_FS_POSIX_ACL=n \
+	CONFIG_9P_FS_SECURITY=n \
+	CONFIG_9P_FSCACHE=n
+  FILES:=$(LINUX_DIR)/fs/9p/9p.ko
+  AUTOLOAD:=$(call AutoLoad,30,9p)
+endef
+
+define KernelPackage/fs-9p/description
+  Kernel module for Plan 9 Resource Sharing Support support
+endef
+
+$(eval $(call KernelPackage,fs-9p))
+
+
+define KernelPackage/fs-afs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Andrew FileSystem client
+  DEFAULT:=n
+  DEPENDS:=+kmod-rxrpc +kmod-dnsresolver +kmod-fs-fscache
+  KCONFIG:=\
+	CONFIG_AFS_FS=m \
+	CONFIG_AFS_DEBUG=n \
+	CONFIG_AFS_FSCACHE=y
+  FILES:=$(LINUX_DIR)/fs/afs/kafs.ko
+  AUTOLOAD:=$(call AutoLoad,30,kafs)
+endef
+
+define KernelPackage/fs-afs/description
+  Kernel module for Andrew FileSystem client support
+endef
+
+$(eval $(call KernelPackage,fs-afs))
+
+define KernelPackage/fs-autofs4
+  SUBMENU:=$(FS_MENU)
+  TITLE:=AUTOFS4 filesystem support
+  KCONFIG:= \
+	CONFIG_AUTOFS4_FS \
+	CONFIG_AUTOFS_FS
+  FILES:= \
+	$(LINUX_DIR)/fs/autofs4/autofs4.ko@lt4.18 \
+	$(LINUX_DIR)/fs/autofs/autofs4.ko@ge4.18
+  AUTOLOAD:=$(call AutoLoad,30,autofs4)
+endef
+
+define KernelPackage/fs-autofs4/description
+ Kernel module for AutoFS4 support
+endef
+
+$(eval $(call KernelPackage,fs-autofs4))
+
+
+define KernelPackage/fs-btrfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=BTRFS filesystem support
+  DEPENDS:=+kmod-lib-crc32c +kmod-lib-lzo +kmod-lib-zlib-inflate +kmod-lib-zlib-deflate +kmod-lib-raid6 +kmod-lib-xor +kmod-lib-zstd
+  KCONFIG:=\
+	CONFIG_BTRFS_FS \
+	CONFIG_BTRFS_FS_POSIX_ACL=n \
+	CONFIG_BTRFS_FS_CHECK_INTEGRITY=n
+  FILES:=\
+	$(LINUX_DIR)/fs/btrfs/btrfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,btrfs,1)
+endef
+
+define KernelPackage/fs-btrfs/description
+ Kernel module for BTRFS support
+endef
+
+$(eval $(call KernelPackage,fs-btrfs))
+
+
+define KernelPackage/fs-cifs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=CIFS support
+  KCONFIG:= \
+	CONFIG_CIFS \
+	CONFIG_CIFS_DFS_UPCALL=n \
+	CONFIG_CIFS_UPCALL=n
+  FILES:=$(LINUX_DIR)/fs/cifs/cifs.ko
+  AUTOLOAD:=$(call AutoLoad,30,cifs)
+  $(call AddDepends/nls)
+  DEPENDS+= \
+    +kmod-crypto-md4 \
+    +kmod-crypto-md5 \
+    +kmod-crypto-sha256 \
+    +kmod-crypto-sha512 \
+    +kmod-crypto-cmac \
+    +kmod-crypto-hmac \
+    +kmod-crypto-arc4 \
+    +kmod-crypto-aead \
+    +kmod-crypto-ccm \
+    +kmod-crypto-ecb \
+    +kmod-crypto-des
+endef
+
+define KernelPackage/fs-cifs/description
+ Kernel module for CIFS support
+endef
+
+$(eval $(call KernelPackage,fs-cifs))
+
+
+define KernelPackage/fs-configfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Configuration filesystem support
+  KCONFIG:= \
+	CONFIG_CONFIGFS_FS
+  FILES:=$(LINUX_DIR)/fs/configfs/configfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,configfs)
+endef
+
+define KernelPackage/fs-configfs/description
+ Kernel module for configfs support
+endef
+
+$(eval $(call KernelPackage,fs-configfs))
+
+
+define KernelPackage/fs-cramfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Compressed RAM/ROM filesystem support
+  DEPENDS:=+kmod-lib-zlib-inflate
+  KCONFIG:= \
+	CONFIG_CRAMFS
+  FILES:=$(LINUX_DIR)/fs/cramfs/cramfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,cramfs)
+endef
+
+define KernelPackage/fs-cramfs/description
+ Kernel module for cramfs support
+endef
+
+$(eval $(call KernelPackage,fs-cramfs))
+
+
+define KernelPackage/fs-efivarfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=efivar filesystem support
+  KCONFIG:=CONFIG_EFIVAR_FS
+  FILES:=$(LINUX_DIR)/fs/efivarfs/efivarfs.ko
+  DEPENDS:=@(x86_64||x86)
+  AUTOLOAD:=$(call Autoload,90,efivarfs)
+endef
+
+define KernelPackage/fs-efivarfs/description
+  Kernel module to support efivarfs file system mountpoint.
+endef
+
+$(eval $(call KernelPackage,fs-efivarfs))
+
+
+define KernelPackage/fs-exportfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=exportfs kernel server support
+  KCONFIG:=CONFIG_EXPORTFS
+  FILES=$(LINUX_DIR)/fs/exportfs/exportfs.ko
+  AUTOLOAD:=$(call AutoLoad,20,exportfs,1)
+endef
+
+define KernelPackage/fs-exportfs/description
+ Kernel module for exportfs. Needed for some other modules.
+endef
+
+$(eval $(call KernelPackage,fs-exportfs))
+
+
+define KernelPackage/fs-ext4
+  SUBMENU:=$(FS_MENU)
+  TITLE:=EXT4 filesystem support
+  DEPENDS := \
+    +kmod-lib-crc16 \
+    +kmod-crypto-hash \
+    +kmod-crypto-crc32c
+  KCONFIG:= \
+	CONFIG_EXT4_FS \
+	CONFIG_EXT4_ENCRYPTION=n \
+	CONFIG_JBD2
+  FILES:= \
+	$(LINUX_DIR)/fs/ext4/ext4.ko \
+	$(LINUX_DIR)/fs/jbd2/jbd2.ko \
+	$(LINUX_DIR)/fs/mbcache.ko
+  AUTOLOAD:=$(call AutoLoad,30,mbcache jbd2 ext4,1)
+endef
+
+define KernelPackage/fs-ext4/description
+ Kernel module for EXT4 filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-ext4))
+
+
+define KernelPackage/fs-f2fs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=F2FS filesystem support
+  DEPENDS:= +kmod-crypto-hash +kmod-crypto-crc32 +kmod-nls-base
+  KCONFIG:=CONFIG_F2FS_FS
+  FILES:=$(LINUX_DIR)/fs/f2fs/f2fs.ko
+  AUTOLOAD:=$(call AutoLoad,30,f2fs,1)
+endef
+
+define KernelPackage/fs-f2fs/description
+ Kernel module for F2FS filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-f2fs))
+
+
+define KernelPackage/fs-fscache
+  SUBMENU:=$(FS_MENU)
+  TITLE:=General filesystem local cache manager
+  DEPENDS:=
+  KCONFIG:=\
+	CONFIG_FSCACHE=m \
+	CONFIG_FSCACHE_STATS=y \
+	CONFIG_FSCACHE_HISTOGRAM=n \
+	CONFIG_FSCACHE_DEBUG=n \
+	CONFIG_FSCACHE_OBJECT_LIST=n \
+	CONFIG_CACHEFILES=y \
+	CONFIG_CACHEFILES_DEBUG=n \
+	CONFIG_CACHEFILES_HISTOGRAM=n
+  FILES:=$(LINUX_DIR)/fs/fscache/fscache.ko
+  AUTOLOAD:=$(call AutoLoad,29,fscache)
+endef
+
+$(eval $(call KernelPackage,fs-fscache))
+
+
+define KernelPackage/fs-hfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=HFS filesystem support
+  DEPENDS:=+kmod-cdrom
+  KCONFIG:=CONFIG_HFS_FS
+  FILES:=$(LINUX_DIR)/fs/hfs/hfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,hfs)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-hfs/description
+ Kernel module for HFS filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-hfs))
+
+
+define KernelPackage/fs-hfsplus
+  SUBMENU:=$(FS_MENU)
+  TITLE:=HFS+ filesystem support
+  DEPENDS:=+kmod-cdrom
+  KCONFIG:=CONFIG_HFSPLUS_FS
+  FILES:=$(LINUX_DIR)/fs/hfsplus/hfsplus.ko
+  AUTOLOAD:=$(call AutoLoad,30,hfsplus)
+  $(call AddDepends/nls,utf8)
+endef
+
+define KernelPackage/fs-hfsplus/description
+ Kernel module for HFS+ filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-hfsplus))
+
+
+define KernelPackage/fs-isofs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=ISO9660 filesystem support
+  DEPENDS:=+kmod-lib-zlib-inflate +kmod-cdrom
+  KCONFIG:=CONFIG_ISO9660_FS CONFIG_JOLIET=y CONFIG_ZISOFS=n
+  FILES:=$(LINUX_DIR)/fs/isofs/isofs.ko
+  AUTOLOAD:=$(call AutoLoad,30,isofs)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-isofs/description
+ Kernel module for ISO9660 filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-isofs))
+
+
+define KernelPackage/fs-jfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=JFS filesystem support
+  KCONFIG:=CONFIG_JFS_FS
+  FILES:=$(LINUX_DIR)/fs/jfs/jfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,jfs,1)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-jfs/description
+ Kernel module for JFS support
+endef
+
+$(eval $(call KernelPackage,fs-jfs))
+
+define KernelPackage/fs-minix
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Minix filesystem support
+  KCONFIG:=CONFIG_MINIX_FS
+  FILES:=$(LINUX_DIR)/fs/minix/minix.ko
+  AUTOLOAD:=$(call AutoLoad,30,minix)
+endef
+
+define KernelPackage/fs-minix/description
+ Kernel module for Minix filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-minix))
+
+
+define KernelPackage/fs-msdos
+  SUBMENU:=$(FS_MENU)
+  TITLE:=MSDOS filesystem support
+  DEPENDS:=+kmod-fs-vfat
+  KCONFIG:=CONFIG_MSDOS_FS
+  FILES:=$(LINUX_DIR)/fs/fat/msdos.ko
+  AUTOLOAD:=$(call AutoLoad,40,msdos)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-msdos/description
+ Kernel module for MSDOS filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-msdos))
+
+
+define KernelPackage/fs-nfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS filesystem client support
+  DEPENDS:=+kmod-fs-nfs-common +kmod-dnsresolver
+  KCONFIG:= \
+	CONFIG_NFS_FS \
+	CONFIG_NFS_USE_LEGACY_DNS=n \
+	CONFIG_NFS_USE_NEW_IDMAPPER=n
+  FILES:= \
+	$(LINUX_DIR)/fs/nfs/nfs.ko
+  AUTOLOAD:=$(call AutoLoad,40,nfs)
+endef
+
+define KernelPackage/fs-nfs/description
+ Kernel module for NFS client support
+endef
+
+$(eval $(call KernelPackage,fs-nfs))
+
+
+define KernelPackage/fs-nfs-common
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Common NFS filesystem modules
+  KCONFIG:= \
+	CONFIG_LOCKD \
+	CONFIG_SUNRPC \
+	CONFIG_GRACE_PERIOD
+  FILES:= \
+	$(LINUX_DIR)/fs/lockd/lockd.ko \
+	$(LINUX_DIR)/net/sunrpc/sunrpc.ko \
+	$(LINUX_DIR)/fs/nfs_common/grace.ko
+  AUTOLOAD:=$(call AutoLoad,30,grace sunrpc lockd)
+endef
+
+$(eval $(call KernelPackage,fs-nfs-common))
+
+
+define KernelPackage/fs-nfs-common-rpcsec
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS Secure RPC
+  DEPENDS:= \
+	+kmod-fs-nfs-common \
+	+kmod-crypto-des \
+	+kmod-crypto-cbc \
+	+kmod-crypto-cts \
+	+kmod-crypto-md5 \
+	+kmod-crypto-sha1 \
+	+kmod-crypto-hmac \
+	+kmod-crypto-ecb \
+	+kmod-crypto-arc4
+  KCONFIG:= \
+	CONFIG_SUNRPC_GSS \
+	CONFIG_RPCSEC_GSS_KRB5
+  FILES:= \
+	$(LINUX_DIR)/lib/oid_registry.ko \
+	$(LINUX_DIR)/net/sunrpc/auth_gss/auth_rpcgss.ko \
+	$(LINUX_DIR)/net/sunrpc/auth_gss/rpcsec_gss_krb5.ko
+  AUTOLOAD:=$(call AutoLoad,31,oid_registry auth_rpcgss rpcsec_gss_krb5)
+endef
+
+define KernelPackage/fs-nfs-common-rpcsec/description
+ Kernel modules for NFS Secure RPC
+endef
+
+$(eval $(call KernelPackage,fs-nfs-common-rpcsec))
+
+
+define KernelPackage/fs-nfs-v3
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS3 filesystem client support
+  DEPENDS:=+kmod-fs-nfs
+  FILES:= \
+	$(LINUX_DIR)/fs/nfs/nfsv3.ko
+  AUTOLOAD:=$(call AutoLoad,41,nfsv3)
+endef
+
+define KernelPackage/fs-nfs-v3/description
+ Kernel module for NFS v3 client support
+endef
+
+$(eval $(call KernelPackage,fs-nfs-v3))
+
+
+define KernelPackage/fs-nfs-v4
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS4 filesystem client support
+  DEPENDS:=+kmod-fs-nfs
+  KCONFIG:= \
+	CONFIG_NFS_V4=y
+  FILES:= \
+	$(LINUX_DIR)/fs/nfs/nfsv4.ko
+  AUTOLOAD:=$(call AutoLoad,41,nfsv4)
+endef
+
+define KernelPackage/fs-nfs-v4/description
+ Kernel module for NFS v4 client support
+endef
+
+$(eval $(call KernelPackage,fs-nfs-v4))
+
+
+define KernelPackage/fs-nfsd
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS kernel server support
+  DEPENDS:=+kmod-fs-nfs-common +kmod-fs-exportfs +kmod-fs-nfs-common-rpcsec
+  KCONFIG:= \
+	CONFIG_NFSD \
+	CONFIG_NFSD_V4=y \
+	CONFIG_NFSD_V4_SECURITY_LABEL=n \
+	CONFIG_NFSD_BLOCKLAYOUT=n \
+	CONFIG_NFSD_SCSILAYOUT=n \
+	CONFIG_NFSD_FLEXFILELAYOUT=n \
+	CONFIG_NFSD_FAULT_INJECTION=n
+  FILES:=$(LINUX_DIR)/fs/nfsd/nfsd.ko
+  AUTOLOAD:=$(call AutoLoad,40,nfsd)
+endef
+
+define KernelPackage/fs-nfsd/description
+ Kernel module for NFS kernel server support
+endef
+
+$(eval $(call KernelPackage,fs-nfsd))
+
+
+define KernelPackage/fs-ntfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NTFS filesystem support
+  KCONFIG:=CONFIG_NTFS_FS
+  FILES:=$(LINUX_DIR)/fs/ntfs/ntfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,ntfs)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-ntfs/description
+ Kernel module for NTFS filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-ntfs))
+
+
+define KernelPackage/fs-reiserfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=ReiserFS filesystem support
+  KCONFIG:=CONFIG_REISERFS_FS
+  FILES:=$(LINUX_DIR)/fs/reiserfs/reiserfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,reiserfs,1)
+endef
+
+define KernelPackage/fs-reiserfs/description
+ Kernel module for ReiserFS support
+endef
+
+$(eval $(call KernelPackage,fs-reiserfs))
+
+
+define KernelPackage/fs-squashfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=SquashFS 4.0 filesystem support
+  KCONFIG:=CONFIG_SQUASHFS \
+	CONFIG_SQUASHFS_XZ=y
+  FILES:=$(LINUX_DIR)/fs/squashfs/squashfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,squashfs,1)
+endef
+
+define KernelPackage/fs-squashfs/description
+ Kernel module for SquashFS 4.0 support
+endef
+
+$(eval $(call KernelPackage,fs-squashfs))
+
+
+define KernelPackage/fs-udf
+  SUBMENU:=$(FS_MENU)
+  TITLE:=UDF filesystem support
+  KCONFIG:=CONFIG_UDF_FS
+  FILES:=$(LINUX_DIR)/fs/udf/udf.ko
+  AUTOLOAD:=$(call AutoLoad,30,udf)
+  DEPENDS:=+kmod-lib-crc-itu-t +kmod-cdrom
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-udf/description
+ Kernel module for UDF filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-udf))
+
+
+define KernelPackage/fs-vfat
+  SUBMENU:=$(FS_MENU)
+  TITLE:=VFAT filesystem support
+  KCONFIG:= \
+	CONFIG_FAT_FS \
+	CONFIG_VFAT_FS
+  FILES:= \
+	$(LINUX_DIR)/fs/fat/fat.ko \
+	$(LINUX_DIR)/fs/fat/vfat.ko
+  AUTOLOAD:=$(call AutoLoad,30,fat vfat)
+  $(call AddDepends/nls,cp437 iso8859-1 utf8)
+endef
+
+define KernelPackage/fs-vfat/description
+ Kernel module for VFAT filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-vfat))
+
+
+define KernelPackage/fs-xfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=XFS filesystem support
+  KCONFIG:=CONFIG_XFS_FS
+  DEPENDS:= +kmod-fs-exportfs +kmod-lib-crc32c
+  FILES:=$(LINUX_DIR)/fs/xfs/xfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,xfs,1)
+endef
+
+define KernelPackage/fs-xfs/description
+ Kernel module for XFS support
+endef
+
+$(eval $(call KernelPackage,fs-xfs))
+
+
+define KernelPackage/fuse
+  SUBMENU:=$(FS_MENU)
+  TITLE:=FUSE (Filesystem in Userspace) support
+  KCONFIG:= CONFIG_FUSE_FS
+  FILES:=$(LINUX_DIR)/fs/fuse/fuse.ko
+  AUTOLOAD:=$(call AutoLoad,80,fuse)
+endef
+
+define KernelPackage/fuse/description
+ Kernel module for userspace filesystem support
+endef
+
+$(eval $(call KernelPackage,fuse))

feeds/ipq807x/linux/modules/hwmon.mk

@@ -0,0 +1,572 @@
+#
+# Copyright (C) 2006-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+HWMON_MENU:=Hardware Monitoring Support
+
+define KernelPackage/hwmon-core
+  SUBMENU:=$(HWMON_MENU)
+  TITLE:=Hardware monitoring support
+  KCONFIG:= \
+	CONFIG_HWMON \
+	CONFIG_HWMON_DEBUG_CHIP=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/hwmon/hwmon.ko
+endef
+
+define KernelPackage/hwmon-core/description
+ Kernel modules for hardware monitoring
+endef
+
+$(eval $(call KernelPackage,hwmon-core))
+
+
+define AddDepends/hwmon
+  SUBMENU:=$(HWMON_MENU)
+  DEPENDS:=+kmod-hwmon-core $(1)
+endef
+
+define KernelPackage/hwmon-ad7418
+  TITLE:=AD741x monitoring support
+  KCONFIG:=CONFIG_SENSORS_AD7418
+  FILES:=$(LINUX_DIR)/drivers/hwmon/ad7418.ko
+  AUTOLOAD:=$(call AutoLoad,60,ad7418 ad7418)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-ad7418/description
+ Kernel module for Analog Devices AD7416, AD7417 and AD7418 temperature monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-ad7418))
+
+define KernelPackage/hwmon-ads1015
+  TITLE:=Texas Instruments ADS1015
+  KCONFIG:= CONFIG_SENSORS_ADS1015
+  FILES:= $(LINUX_DIR)/drivers/hwmon/ads1015.ko
+  AUTOLOAD:=$(call AutoLoad,60,ads1015)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-ads1015/description
+ Kernel module for Texas Instruments ADS1015 Analog-to-Digital converter
+endef
+
+$(eval $(call KernelPackage,hwmon-ads1015))
+
+define KernelPackage/hwmon-adt7410
+  TITLE:=ADT7410 monitoring support
+  KCONFIG:= \
+	CONFIG_SENSORS_ADT7X10 \
+	CONFIG_SENSORS_ADT7410
+  FILES:= \
+	$(LINUX_DIR)/drivers/hwmon/adt7x10.ko \
+	$(LINUX_DIR)/drivers/hwmon/adt7410.ko
+  AUTOLOAD:=$(call AutoLoad,60,adt7x10 adt7410)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-adt7410/description
+ Kernel module for ADT7410/7420 I2C thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-adt7410))
+
+
+define KernelPackage/hwmon-adt7475
+  TITLE:=ADT7473/7475/7476/7490 monitoring support
+  KCONFIG:=CONFIG_SENSORS_ADT7475
+  FILES:=$(LINUX_DIR)/drivers/hwmon/adt7475.ko
+  AUTOLOAD:=$(call AutoProbe,adt7475)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-hwmon-vid)
+endef
+
+define KernelPackage/hwmon-adt7475/description
+ Kernel module for ADT7473/7475/7476/7490 thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-adt7475))
+
+
+define KernelPackage/hwmon-dme1737
+  TITLE:=SMSC DME1737 and compatible monitoring support
+  KCONFIG:=CONFIG_SENSORS_DME1737
+  FILES:= \
+	$(LINUX_DIR)/drivers/hwmon/dme1737.ko
+  AUTOLOAD:=$(call AutoProbe,dme1737)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-hwmon-vid)
+endef
+
+define KernelPackage/hwmon-dme1737/description
+ SMSC DME1737, SCH3112, SCH3114, SCH3116, SCH5027 monitoring support
+endef
+
+$(eval $(call KernelPackage,hwmon-dme1737))
+
+
+define KernelPackage/hwmon-drivetemp
+  TITLE:=Hard disk drives with temperature sensor
+  KCONFIG:=CONFIG_SENSORS_DRIVETEMP
+  FILES:=$(LINUX_DIR)/drivers/hwmon/drivetemp.ko
+  AUTOLOAD:=$(call AutoLoad,60,drivetemp)
+  $(call AddDepends/hwmon,+kmod-ata-core +kmod-scsi-core)
+endef
+
+define KernelPackage/hwmon-drivetemp/description
+ Kernel module for Hard disk drives with temperature sensor
+endef
+
+$(eval $(call KernelPackage,hwmon-drivetemp))
+
+
+define KernelPackage/hwmon-gpiofan
+  TITLE:=Generic GPIO FAN support
+  KCONFIG:=CONFIG_SENSORS_GPIO_FAN
+  FILES:=$(LINUX_DIR)/drivers/hwmon/gpio-fan.ko
+  AUTOLOAD:=$(call AutoLoad,60,gpio-fan)
+  $(call AddDepends/hwmon,+kmod-i2c-core +PACKAGE_kmod-thermal:kmod-thermal)
+endef
+
+define KernelPackage/hwmon-gpiofan/description
+  Kernel module for GPIO controlled FANs
+endef
+
+$(eval $(call KernelPackage,hwmon-gpiofan))
+
+
+define KernelPackage/hwmon-f71882fg
+  TITLE:=F71882FG compatible monitoring support
+  KCONFIG:=CONFIG_SENSORS_F71882FG
+  FILES:=$(LINUX_DIR)/drivers/hwmon/f71882fg.ko
+  AUTOLOAD:=$(call AutoProbe,f71882fg)
+  $(call AddDepends/hwmon,@TARGET_x86)
+endef
+
+define KernelPackage/hwmon-f71882fg/description
+ Kernel module for hardware monitoring via many Fintek Super-IO chips.
+endef
+
+$(eval $(call KernelPackage,hwmon-f71882fg))
+
+
+define KernelPackage/hwmon-ina209
+  TITLE:=INA209 monitoring support
+  KCONFIG:=CONFIG_SENSORS_INA209
+  FILES:=$(LINUX_DIR)/drivers/hwmon/ina209.ko
+  AUTOLOAD:=$(call AutoProbe,ina209)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-ina209/description
+ Kernel module for ina209 dc power monitor chips
+endef
+
+$(eval $(call KernelPackage,hwmon-ina209))
+
+
+define KernelPackage/hwmon-ina2xx
+  TITLE:=INA2XX monitoring support
+  KCONFIG:=CONFIG_SENSORS_INA2XX
+  FILES:=$(LINUX_DIR)/drivers/hwmon/ina2xx.ko
+  AUTOLOAD:=$(call AutoProbe,ina2xx)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-regmap-i2c)
+endef
+
+define KernelPackage/hwmon-ina2xx/description
+ Kernel module for ina2xx dc current monitor chips
+endef
+
+$(eval $(call KernelPackage,hwmon-ina2xx))
+
+
+define KernelPackage/hwmon-it87
+  TITLE:=IT87 monitoring support
+  KCONFIG:=CONFIG_SENSORS_IT87
+  FILES:=$(LINUX_DIR)/drivers/hwmon/it87.ko
+  AUTOLOAD:=$(call AutoProbe,it87)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-hwmon-vid +PACKAGE_kmod-thermal:kmod-thermal)
+endef
+
+define KernelPackage/hwmon-it87/description
+ Kernel module for it87 thermal and voltage monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-it87))
+
+
+define KernelPackage/hwmon-lm63
+  TITLE:=LM63/64 monitoring support
+  KCONFIG:=CONFIG_SENSORS_LM63
+  FILES:=$(LINUX_DIR)/drivers/hwmon/lm63.ko
+  AUTOLOAD:=$(call AutoProbe,lm63)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-regmap-i2c)
+endef
+
+define KernelPackage/hwmon-lm63/description
+ Kernel module for lm63 and lm64 thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-lm63))
+
+
+define KernelPackage/hwmon-lm75
+  TITLE:=LM75 monitoring support
+  KCONFIG:=CONFIG_SENSORS_LM75
+  FILES:=$(LINUX_DIR)/drivers/hwmon/lm75.ko
+  AUTOLOAD:=$(call AutoProbe,lm75)
+  $(call AddDepends/hwmon,+kmod-i2c-core +PACKAGE_kmod-thermal:kmod-thermal +kmod-regmap-i2c)
+endef
+
+define KernelPackage/hwmon-lm75/description
+ Kernel module for lm75 thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-lm75))
+
+
+define KernelPackage/hwmon-lm77
+  TITLE:=LM77 monitoring support
+  KCONFIG:=CONFIG_SENSORS_LM77
+  FILES:=$(LINUX_DIR)/drivers/hwmon/lm77.ko
+  AUTOLOAD:=$(call AutoProbe,lm77)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-lm77/description
+ Kernel module for LM77 thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-lm77))
+
+
+define KernelPackage/hwmon-lm85
+  TITLE:=LM85 monitoring support
+  KCONFIG:=CONFIG_SENSORS_LM85
+  FILES:=$(LINUX_DIR)/drivers/hwmon/lm85.ko
+  AUTOLOAD:=$(call AutoProbe,lm85)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-hwmon-vid)
+endef
+
+define KernelPackage/hwmon-lm85/description
+ Kernel module for LM85 thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-lm85))
+
+
+define KernelPackage/hwmon-lm90
+  TITLE:=LM90 monitoring support
+  KCONFIG:=CONFIG_SENSORS_LM90
+  FILES:=$(LINUX_DIR)/drivers/hwmon/lm90.ko
+  AUTOLOAD:=$(call AutoProbe,lm90)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-lm90/description
+ Kernel module for LM90 thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-lm90))
+
+
+define KernelPackage/hwmon-lm92
+  TITLE:=LM92 monitoring support
+  KCONFIG:=CONFIG_SENSORS_LM92
+  FILES:=$(LINUX_DIR)/drivers/hwmon/lm92.ko
+  AUTOLOAD:=$(call AutoProbe,lm92)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-lm92/description
+ Kernel module for LM92 thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-lm92))
+
+
+define KernelPackage/hwmon-lm95241
+  TITLE:=LM95241 monitoring support
+  KCONFIG:=CONFIG_SENSORS_LM95241
+  FILES:=$(LINUX_DIR)/drivers/hwmon/lm95241.ko
+  AUTOLOAD:=$(call AutoProbe,lm95241)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-lm95241/description
+ Kernel module for LM95241 thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-lm95241))
+
+
+define KernelPackage/hwmon-ltc4151
+  TITLE:=LTC4151 monitoring support
+  KCONFIG:=CONFIG_SENSORS_LTC4151
+  FILES:=$(LINUX_DIR)/drivers/hwmon/ltc4151.ko
+  AUTOLOAD:=$(call AutoProbe,ltc4151)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-ltc4151/description
+ Kernel module for Linear Technology LTC4151 current and voltage monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-ltc4151))
+
+
+define KernelPackage/hwmon-mcp3021
+  TITLE:=MCP3021/3221 monitoring support
+  KCONFIG:=CONFIG_SENSORS_MCP3021
+  FILES:=$(LINUX_DIR)/drivers/hwmon/mcp3021.ko
+  AUTOLOAD:=$(call AutoProbe,mcp3021)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-mcp3021/description
+ Kernel module for Linear Technology MCP3021/3221 current and voltage monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-mcp3021))
+
+
+define KernelPackage/hwmon-nct6775
+  TITLE:=NCT6106D/6775F/6776F/6779D/6791D/6792D/6793D and compatibles monitoring support
+  KCONFIG:=CONFIG_SENSORS_NCT6775
+  FILES:=$(LINUX_DIR)/drivers/hwmon/nct6775.ko
+  AUTOLOAD:=$(call AutoProbe,nct6775)
+  $(call AddDepends/hwmon,@PCI_SUPPORT @TARGET_x86 +kmod-hwmon-vid)
+endef
+
+define KernelPackage/hwmon-nct6775/description
+ Kernel module for NCT6106D/6775F/6776F/6779D/6791D/6792D/6793D thermal monitor chip
+endef
+
+$(eval $(call KernelPackage,hwmon-nct6775))
+
+
+define KernelPackage/hwmon-pc87360
+  TITLE:=PC87360 monitoring support
+  KCONFIG:=CONFIG_SENSORS_PC87360
+  FILES:=$(LINUX_DIR)/drivers/hwmon/pc87360.ko
+  AUTOLOAD:=$(call AutoProbe,pc87360)
+  $(call AddDepends/hwmon,@TARGET_x86 +kmod-hwmon-vid)
+endef
+
+define KernelPackage/hwmon-pc87360/description
+ Kernel modules for PC87360 chips
+endef
+
+$(eval $(call KernelPackage,hwmon-pc87360))
+
+
+define KernelPackage/pmbus-core
+  TITLE:=PMBus support
+  KCONFIG:= CONFIG_PMBUS
+  FILES:=$(LINUX_DIR)/drivers/hwmon/pmbus/pmbus_core.ko
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/pmbus-core/description
+ Kernel modules for Power Management Bus
+endef
+
+$(eval $(call KernelPackage,pmbus-core))
+
+
+define KernelPackage/pmbus-zl6100
+  TITLE:=Intersil / Zilker Labs ZL6100 hardware monitoring
+  KCONFIG:=CONFIG_SENSORS_ZL6100
+  FILES:=$(LINUX_DIR)/drivers/hwmon/pmbus/zl6100.ko
+  AUTOLOAD:=$(call AutoProbe,zl6100)
+  $(call AddDepends/hwmon, +kmod-pmbus-core)
+endef
+
+define KernelPackage/pmbus-zl6100/description
+ Kernel module for Intersil / Zilker Labs ZL6100 and
+compatible digital DC-DC controllers
+endef
+
+$(eval $(call KernelPackage,pmbus-zl6100))
+
+
+define KernelPackage/hwmon-pwmfan
+  TITLE:=Generic PWM FAN support
+  KCONFIG:=CONFIG_SENSORS_PWM_FAN
+  FILES:=$(LINUX_DIR)/drivers/hwmon/pwm-fan.ko
+  AUTOLOAD:=$(call AutoLoad,60,pwm-fan)
+  $(call AddDepends/hwmon, +PACKAGE_kmod-thermal:kmod-thermal)
+endef
+
+define KernelPackage/hwmon-pwmfan/description
+  Kernel module for PWM controlled FANs
+endef
+
+$(eval $(call KernelPackage,hwmon-pwmfan))
+
+
+define KernelPackage/hwmon-sch5627
+  TITLE:=SMSC SCH5627 monitoring support
+  KCONFIG:= \
+	CONFIG_SENSORS_SCH5627 \
+	CONFIG_WATCHDOG_CORE=y
+  FILES:= \
+	$(LINUX_DIR)/drivers/hwmon/sch5627.ko \
+	$(LINUX_DIR)/drivers/hwmon/sch56xx-common.ko
+  AUTOLOAD:=$(call AutoProbe,sch5627)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-sch5627/description
+ SMSC SCH5627 Super I/O chips include complete hardware monitoring
+endef
+
+$(eval $(call KernelPackage,hwmon-sch5627))
+
+
+define KernelPackage/hwmon-sht21
+  TITLE:=Sensiron SHT21 and compat. monitoring support
+  KCONFIG:=CONFIG_SENSORS_SHT21
+  FILES:=$(LINUX_DIR)/drivers/hwmon/sht21.ko
+  AUTOLOAD:=$(call AutoProbe,sht21)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-sht21/description
+ Kernel module for Sensirion SHT21 and SHT25 temperature and humidity sensors chip
+endef
+
+$(eval $(call KernelPackage,hwmon-sht21))
+
+
+define KernelPackage/hwmon-tmp102
+  TITLE:=Texas Instruments TMP102 monitoring support
+  KCONFIG:=CONFIG_SENSORS_TMP102
+  FILES:=$(LINUX_DIR)/drivers/hwmon/tmp102.ko
+  AUTOLOAD:=$(call AutoProbe,tmp102)
+  $(call AddDepends/hwmon,+kmod-i2c-core +PACKAGE_kmod-thermal:kmod-thermal +kmod-regmap-i2c)
+endef
+
+define KernelPackage/hwmon-tmp102/description
+ Kernel module for Texas Instruments TMP102 temperature sensors chip
+endef
+
+$(eval $(call KernelPackage,hwmon-tmp102))
+
+
+define KernelPackage/hwmon-tmp103
+  TITLE:=Texas Instruments TMP103 monitoring support
+  KCONFIG:=CONFIG_SENSORS_TMP103
+  FILES:=$(LINUX_DIR)/drivers/hwmon/tmp103.ko
+  AUTOLOAD:=$(call AutoProbe,tmp103)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-regmap-i2c)
+endef
+
+define KernelPackage/hwmon-tmp103/description
+ Kernel module for Texas Instruments TMP103 temperature sensors chip
+endef
+
+$(eval $(call KernelPackage,hwmon-tmp103))
+
+
+define KernelPackage/hwmon-tmp421
+  TITLE:=TI TMP421 and compatible monitoring support
+  KCONFIG:=CONFIG_SENSORS_TMP421
+  FILES:=$(LINUX_DIR)/drivers/hwmon/tmp421.ko
+  AUTOLOAD:=$(call AutoLoad,60,tmp421)
+  $(call AddDepends/hwmon,+kmod-i2c-core)
+endef
+
+define KernelPackage/hwmon-tmp421/description
+  Kernel module for the Texas Instruments TMP421 and compatible chips.
+endef
+
+$(eval $(call KernelPackage,hwmon-tmp421))
+
+
+define KernelPackage/hwmon-vid
+  TITLE:=VID/VRM/VRD voltage conversion module.
+  KCONFIG:=CONFIG_HWMON_VID
+  FILES:=$(LINUX_DIR)/drivers/hwmon/hwmon-vid.ko
+  AUTOLOAD:=$(call AutoLoad,41,hwmon-vid)
+  $(call AddDepends/hwmon,)
+endef
+
+define KernelPackage/hwmon-vid/description
+ VID/VRM/VRD voltage conversion module for hardware monitoring
+endef
+
+$(eval $(call KernelPackage,hwmon-vid))
+
+
+define KernelPackage/hwmon-w83627ehf
+  TITLE:=Winbond W83627EHF/EHG/DHG/UHG, W83667HG monitoring support
+  KCONFIG:=CONFIG_SENSORS_W83627EHF
+  FILES:=$(LINUX_DIR)/drivers/hwmon/w83627ehf.ko
+  AUTOLOAD:=$(call AutoProbe,w83627ehf)
+  $(call AddDepends/hwmon,@TARGET_x86 +kmod-hwmon-vid)
+endef
+
+define KernelPackage/hwmon-w83627ehf/description
+ Kernel module for Winbond W83627EHF/EHG/DHG/UHG and W83667HG thermal monitor chip
+ Support for NCT6775F and NCT6776F has been removed from this driver in favour of
+ using the nct6775 driver to handle those chips.
+endef
+
+$(eval $(call KernelPackage,hwmon-w83627ehf))
+
+
+define KernelPackage/hwmon-w83627hf
+  TITLE:=Winbond W83627HF monitoring support
+  KCONFIG:=CONFIG_SENSORS_W83627HF
+  FILES:=$(LINUX_DIR)/drivers/hwmon/w83627hf.ko
+  AUTOLOAD:=$(call AutoLoad,50,w83627hf)
+  $(call AddDepends/hwmon,@TARGET_x86 +kmod-hwmon-vid)
+endef
+
+define KernelPackage/hwmon-w83627hf/description
+  Kernel module for the Winbond W83627HF chips.
+endef
+
+$(eval $(call KernelPackage,hwmon-w83627hf))
+
+
+define KernelPackage/hwmon-w83793
+  TITLE:=Winbond W83793G/R monitoring support
+  KCONFIG:=CONFIG_SENSORS_W83793
+  FILES:=$(LINUX_DIR)/drivers/hwmon/w83793.ko
+  AUTOLOAD:=$(call AutoProbe,w83793)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-hwmon-vid)
+endef
+
+define KernelPackage/hwmon-w83793/description
+  Kernel module for the Winbond W83793G and W83793R chips.
+endef
+
+$(eval $(call KernelPackage,hwmon-w83793))
+
+
+define KernelPackage/hwmon-adcxx
+  TITLE:=ADCxx monitoring support
+  KCONFIG:=CONFIG_SENSORS_ADCXX
+  FILES:=$(LINUX_DIR)/drivers/hwmon/adcxx.ko
+  AUTOLOAD:=$(call AutoLoad,60,adcxx)
+  $(call AddDepends/hwmon,)
+endef
+
+define KernelPackage/hwmon-adcxx/description
+  Kernel module for the National Semiconductor
+  ADC<bb><c>S<sss> chip family, where
+  * bb  is the resolution in number of bits (8, 10, 12)
+  * c   is the number of channels (1, 2, 4, 8)
+  * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+    kSPS and 101 for 1 MSPS)
+
+  Examples : ADC081S101, ADC124S501, ...
+endef
+
+$(eval $(call KernelPackage,hwmon-adcxx))
+
+

feeds/ipq807x/linux/modules/i2c.mk

@@ -0,0 +1,261 @@
+#
+# Copyright (C) 2006-2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+I2C_MENU:=I2C support
+
+ModuleConfVar=$(word 1,$(subst :,$(space),$(1)))
+ModuleFullPath=$(LINUX_DIR)/$(word 2,$(subst :,$(space),$(1))).ko
+ModuleKconfig=$(foreach mod,$(1),$(call ModuleConfVar,$(mod)))
+ModuleFiles=$(foreach mod,$(1),$(call ModuleFullPath,$(mod)))
+ModuleAuto=$(call AutoLoad,$(1),$(foreach mod,$(2),$(basename $(notdir $(call ModuleFullPath,$(mod))))),$(3))
+
+define i2c_defaults
+  SUBMENU:=$(I2C_MENU)
+  KCONFIG:=$(call ModuleKconfig,$(1))
+  FILES:=$(call ModuleFiles,$(1))
+  AUTOLOAD:=$(call ModuleAuto,$(2),$(1),$(3))
+endef
+
+I2C_CORE_MODULES:= \
+  CONFIG_I2C:drivers/i2c/i2c-core \
+  CONFIG_I2C_CHARDEV:drivers/i2c/i2c-dev
+
+define KernelPackage/i2c-core
+  $(call i2c_defaults,$(I2C_CORE_MODULES),51)
+  TITLE:=I2C support
+endef
+
+define KernelPackage/i2c-core/description
+ Kernel modules for I2C support
+endef
+
+$(eval $(call KernelPackage,i2c-core))
+
+
+I2C_ALGOBIT_MODULES:= \
+  CONFIG_I2C_ALGOBIT:drivers/i2c/algos/i2c-algo-bit
+
+define KernelPackage/i2c-algo-bit
+  $(call i2c_defaults,$(I2C_ALGOBIT_MODULES),55)
+  TITLE:=I2C bit-banging interfaces
+  DEPENDS:=+kmod-i2c-core
+endef
+
+define KernelPackage/i2c-algo-bit/description
+ Kernel modules for I2C bit-banging interfaces
+endef
+
+$(eval $(call KernelPackage,i2c-algo-bit))
+
+
+I2C_ALGOPCA_MODULES:= \
+  CONFIG_I2C_ALGOPCA:drivers/i2c/algos/i2c-algo-pca
+
+define KernelPackage/i2c-algo-pca
+  $(call i2c_defaults,$(I2C_ALGOPCA_MODULES),55)
+  TITLE:=I2C PCA 9564 interfaces
+  DEPENDS:=+kmod-i2c-core
+endef
+
+define KernelPackage/i2c-algo-pca/description
+ Kernel modules for I2C PCA 9564 interfaces
+endef
+
+$(eval $(call KernelPackage,i2c-algo-pca))
+
+
+I2C_ALGOPCF_MODULES:= \
+  CONFIG_I2C_ALGOPCF:drivers/i2c/algos/i2c-algo-pcf
+
+define KernelPackage/i2c-algo-pcf
+  $(call i2c_defaults,$(I2C_ALGOPCF_MODULES),55)
+  TITLE:=I2C PCF 8584 interfaces
+  DEPENDS:=+kmod-i2c-core
+endef
+
+define KernelPackage/i2c-algo-pcf/description
+ Kernel modules for I2C PCF 8584 interfaces
+endef
+
+$(eval $(call KernelPackage,i2c-algo-pcf))
+
+
+I2C_GPIO_MODULES:= \
+  CONFIG_I2C_GPIO:drivers/i2c/busses/i2c-gpio
+
+define KernelPackage/i2c-gpio
+  $(call i2c_defaults,$(I2C_GPIO_MODULES),59)
+  TITLE:=GPIO-based bitbanging I2C
+  DEPENDS:=@GPIO_SUPPORT +kmod-i2c-algo-bit
+endef
+
+define KernelPackage/i2c-gpio/description
+ Kernel modules for a very simple bitbanging I2C driver utilizing the
+ arch-neutral GPIO API to control the SCL and SDA lines.
+endef
+
+$(eval $(call KernelPackage,i2c-gpio))
+
+
+I2C_I801_MODULES:= \
+  CONFIG_I2C_I801:drivers/i2c/busses/i2c-i801
+
+define KernelPackage/i2c-i801
+  $(call i2c_defaults,$(I2C_I801_MODULES),59)
+  TITLE:=Intel I801 and compatible I2C interfaces
+  DEPENDS:=@PCI_SUPPORT @TARGET_x86 +kmod-i2c-core +kmod-i2c-smbus
+endef
+
+define KernelPackage/i2c-i801/description
+ Support for the Intel I801 family of mainboard I2C interfaces,
+ specifically 82801AA, 82801AB, 82801BA, 82801CA/CAM, 82801DB,
+ 82801EB/ER (ICH5/ICH5R), 6300ESB, ICH6, ICH7, ESB2, ICH8, ICH9,
+ EP80579 (Tolapai), ICH10, 5/3400 Series (PCH), 6 Series (PCH),
+ Patsburg (PCH), DH89xxCC (PCH), Panther Point (PCH),
+ Lynx Point (PCH), Lynx Point-LP (PCH), Avoton (SOC),
+ Wellsburg (PCH), Coleto Creek (PCH), Wildcat Point (PCH),
+ Wildcat Point-LP (PCH), BayTrail (SOC), Sunrise Point-H (PCH),
+ Sunrise Point-LP (PCH), DNV (SOC), Broxton (SOC),
+ Lewisburg (PCH).
+endef
+
+$(eval $(call KernelPackage,i2c-i801))
+
+
+I2C_MUX_MODULES:= \
+  CONFIG_I2C_MUX:drivers/i2c/i2c-mux
+
+define KernelPackage/i2c-mux
+  $(call i2c_defaults,$(I2C_MUX_MODULES),51)
+  TITLE:=I2C bus multiplexing support
+  DEPENDS:=+kmod-i2c-core
+endef
+
+define KernelPackage/i2c-mux/description
+ Kernel modules for I2C bus multiplexing support
+endef
+
+$(eval $(call KernelPackage,i2c-mux))
+
+I2C_MUX_GPIO_MODULES:= \
+  CONFIG_I2C_MUX_GPIO:drivers/i2c/muxes/i2c-mux-gpio
+
+define KernelPackage/i2c-mux-gpio
+  $(call i2c_defaults,$(I2C_MUX_GPIO_MODULES),51)
+  TITLE:=GPIO-based I2C mux/switches
+  DEPENDS:=+kmod-i2c-mux
+endef
+
+define KernelPackage/i2c-mux-gpio/description
+ Kernel modules for GENERIC_GPIO I2C bus mux/switching devices
+endef
+
+$(eval $(call KernelPackage,i2c-mux-gpio))
+
+
+I2C_MUX_PCA9541_MODULES:= \
+  CONFIG_I2C_MUX_PCA9541:drivers/i2c/muxes/i2c-mux-pca9541
+
+define KernelPackage/i2c-mux-pca9541
+  $(call i2c_defaults,$(I2C_MUX_PCA9541_MODULES),51)
+  TITLE:=Philips PCA9541 I2C mux/switches
+  DEPENDS:=+kmod-i2c-mux
+endef
+
+define KernelPackage/i2c-mux-pca9541/description
+ Kernel modules for PCA9541 I2C bus mux/switching devices
+endef
+
+$(eval $(call KernelPackage,i2c-mux-pca9541))
+
+I2C_MUX_PCA954x_MODULES:= \
+  CONFIG_I2C_MUX_PCA954x:drivers/i2c/muxes/i2c-mux-pca954x
+
+define KernelPackage/i2c-mux-pca954x
+  $(call i2c_defaults,$(I2C_MUX_PCA954x_MODULES),51)
+  TITLE:=Philips PCA954x I2C mux/switches
+  DEPENDS:=+kmod-i2c-mux
+endef
+
+define KernelPackage/i2c-mux-pca954x/description
+ Kernel modules for PCA954x I2C bus mux/switching devices
+endef
+
+$(eval $(call KernelPackage,i2c-mux-pca954x))
+
+
+I2C_PIIX4_MODULES:= \
+  CONFIG_I2C_PIIX4:drivers/i2c/busses/i2c-piix4
+
+define KernelPackage/i2c-piix4
+  $(call i2c_defaults,$(I2C_PIIX4_MODULES),59)
+  TITLE:=Intel PIIX4 and compatible I2C interfaces
+  DEPENDS:=@PCI_SUPPORT @TARGET_x86 +kmod-i2c-core
+endef
+
+define KernelPackage/i2c-piix4/description
+ Support for the Intel PIIX4 family of mainboard I2C interfaces,
+ specifically Intel PIIX4, Intel 440MX, ATI IXP200, ATI IXP300,
+ ATI IXP400, ATI SB600, ATI SB700/SP5100, ATI SB800, AMD Hudson-2,
+ AMD ML, AMD CZ, Serverworks OSB4, Serverworks CSB5,
+ Serverworks CSB6, Serverworks HT-1000, Serverworks HT-1100 and
+ SMSC Victory66.
+endef
+
+$(eval $(call KernelPackage,i2c-piix4))
+
+
+I2C_PXA_MODULES:= \
+  CONFIG_I2C_PXA:drivers/i2c/busses/i2c-pxa
+
+define KernelPackage/i2c-pxa
+  $(call i2c_defaults,$(I2C_PXA_MODULES),50)
+  TITLE:=Intel PXA I2C bus driver
+  DEPENDS:=+kmod-i2c-core
+endef
+
+define KernelPackage/i2c-pxa/description
+  Kernel module for Intel PXA2XX I2C adapter
+endef
+
+$(eval $(call KernelPackage,i2c-pxa))
+
+
+I2C_SMBUS_MODULES:= \
+  CONFIG_I2C_SMBUS:drivers/i2c/i2c-smbus
+
+define KernelPackage/i2c-smbus
+  $(call i2c_defaults,$(I2C_SMBUS_MODULES),58)
+  TITLE:=SMBus-specific protocols helper
+  DEPENDS:=+kmod-i2c-core
+endef
+
+define KernelPackage/i2c-smbus/description
+ Support for the SMBus extensions to the I2C specification.
+endef
+
+$(eval $(call KernelPackage,i2c-smbus))
+
+
+
+I2C_TINY_USB_MODULES:= \
+  CONFIG_I2C_TINY_USB:drivers/i2c/busses/i2c-tiny-usb
+
+define KernelPackage/i2c-tiny-usb
+  $(call i2c_defaults,$(I2C_TINY_USB_MODULES),59)
+  TITLE:=I2C Tiny USB adaptor
+  DEPENDS:=@USB_SUPPORT +kmod-i2c-core +kmod-usb-core
+endef
+
+define KernelPackage/i2c-tiny-usb/description
+ Kernel module for the I2C Tiny USB adaptor developed
+ by Till Harbaum (http://www.harbaum.org/till/i2c_tiny_usb)
+endef
+
+$(eval $(call KernelPackage,i2c-tiny-usb))
+
+

feeds/ipq807x/linux/modules/iio.mk

@@ -0,0 +1,546 @@
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+IIO_MENU:=Industrial I/O Modules
+
+
+define KernelPackage/iio-core
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=Industrial IO core
+  KCONFIG:= \
+	CONFIG_IIO \
+	CONFIG_IIO_BUFFER=y \
+	CONFIG_IIO_TRIGGER=y
+  FILES:=$(LINUX_DIR)/drivers/iio/industrialio.ko
+  AUTOLOAD:=$(call AutoLoad,55,industrialio)
+endef
+
+define KernelPackage/iio-core/description
+ The industrial I/O subsystem provides a unified framework for
+ drivers for many different types of embedded sensors using a
+ number of different physical interfaces (i2c, spi, etc)
+endef
+
+$(eval $(call KernelPackage,iio-core))
+
+
+define KernelPackage/iio-kfifo-buf
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=Industrial I/O buffering based on kfifo
+  DEPENDS:=+kmod-iio-core
+  KCONFIG:=CONFIG_IIO_KFIFO_BUF
+  FILES:=$(LINUX_DIR)/drivers/iio/buffer/kfifo_buf.ko
+  AUTOLOAD:=$(call AutoLoad,55,kfifo_buf)
+endef
+
+define KernelPackage/iio-kfifo-buf/description
+ A simple fifo based on kfifo.  Note that this currently provides no buffer
+ events so it is up to userspace to work out how often to read from the buffer.
+endef
+
+$(eval $(call KernelPackage,iio-kfifo-buf))
+
+
+define KernelPackage/industrialio-triggered-buffer
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=Provides helper functions for setting up triggered buffers.
+  DEPENDS:=+kmod-iio-core +kmod-iio-kfifo-buf
+  KCONFIG:=CONFIG_IIO_TRIGGERED_BUFFER
+  FILES:=$(LINUX_DIR)/drivers/iio/buffer/industrialio-triggered-buffer.ko
+  AUTOLOAD:=$(call AutoLoad,55,industrialio-triggered-buffer)
+endef
+
+define KernelPackage/industrialio-triggered-buffer/description
+ Provides helper functions for setting up triggered buffers.
+endef
+
+$(eval $(call KernelPackage,industrialio-triggered-buffer))
+
+
+define KernelPackage/iio-ad799x
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-i2c-core +kmod-iio-core +kmod-industrialio-triggered-buffer
+  TITLE:=Analog Devices AD799x ADC driver
+  KCONFIG:= \
+	CONFIG_AD799X_RING_BUFFER=y \
+	CONFIG_AD799X
+  FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
+  AUTOLOAD:=$(call AutoLoad,56,ad799x)
+endef
+
+define KernelPackage/iio-ad799x/description
+ support for Analog Devices:
+ ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
+ i2c analog to digital converters (ADC).
+endef
+
+$(eval $(call KernelPackage,iio-ad799x))
+
+define KernelPackage/iio-hmc5843
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-i2c-core +kmod-iio-core +kmod-regmap-i2c +kmod-industrialio-triggered-buffer
+  TITLE:=Honeywell HMC58x3 Magnetometer
+  KCONFIG:= CONFIG_SENSORS_HMC5843_I2C
+  FILES:= \
+      $(LINUX_DIR)/drivers/iio/magnetometer/hmc5843_i2c.ko \
+      $(LINUX_DIR)/drivers/iio/magnetometer/hmc5843_core.ko
+  AUTOLOAD:=$(call AutoLoad,56,hmc5843)
+endef
+
+define KernelPackage/iio-hmc5843/description
+  Honeywell HMC5843/5883/5883L 3-Axis Magnetometer
+endef
+
+$(eval $(call KernelPackage,iio-hmc5843))
+
+define KernelPackage/iio-bh1750
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-i2c-core +kmod-iio-core
+  TITLE:=ROHM BH1750 ambient light sensor
+  KCONFIG:= CONFIG_BH1750
+  FILES:=$(LINUX_DIR)/drivers/iio/light/bh1750.ko
+  AUTOLOAD:=$(call AutoLoad,56,bh1750)
+endef
+define KernelPackage/iio-bh1750/description
+  ROHM BH1750 ambient light sensor (i2c bus)
+endef
+$(eval $(call KernelPackage,iio-bh1750))
+
+define KernelPackage/iio-am2315
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-i2c-core +kmod-iio-core +kmod-industrialio-triggered-buffer
+  TITLE:=Asong AM2315 humidity/temperature sensor
+  KCONFIG:= CONFIG_AM2315
+  FILES:=$(LINUX_DIR)/drivers/iio/humidity/am2315.ko
+  AUTOLOAD:=$(call AutoLoad,56,am2315)
+endef
+define KernelPackage/iio-am2315/description
+  Aosong AM2315 humidity/temperature sensor (I2C bus)
+endef
+$(eval $(call KernelPackage,iio-am2315))
+
+define KernelPackage/iio-mxs-lradc
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=@TARGET_mxs +kmod-iio-core +kmod-industrialio-triggered-buffer
+  TITLE:=Freescale i.MX23/i.MX28 LRADC ADC driver
+  KCONFIG:= \
+	CONFIG_MXS_LRADC_ADC
+  FILES:=$(LINUX_DIR)/drivers/iio/adc/mxs-lradc-adc.ko
+  AUTOLOAD:=$(call AutoLoad,56,mxs-lradc-adc)
+endef
+
+define KernelPackage/iio-mxs-lradc/description
+ Support for Freescale's i.MX23/i.MX28 SoC internal Low-Resolution ADC
+endef
+
+$(eval $(call KernelPackage,iio-mxs-lradc))
+
+define KernelPackage/iio-dht11
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
+  TITLE:=DHT11 (and compatible) humidity and temperature sensors
+  KCONFIG:= \
+	CONFIG_DHT11
+  FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
+  AUTOLOAD:=$(call AutoLoad,56,dht11)
+endef
+
+define KernelPackage/iio-dht11/description
+ support for DHT11 and DHT22 digitial humidity and temperature sensors
+ attached at GPIO lines. You will need a custom device tree file to
+ specify the GPIO line to use.
+endef
+
+$(eval $(call KernelPackage,iio-dht11))
+
+
+define KernelPackage/iio-bme680
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=BME680 gas/humidity/pressure/temperature sensor
+  DEPENDS:=@!LINUX_4_14 +kmod-iio-core +kmod-regmap-core
+  KCONFIG:=CONFIG_BME680
+  FILES:=$(LINUX_DIR)/drivers/iio/chemical/bme680_core.ko
+endef
+
+define KernelPackage/iio-bme680/description
+ This driver adds support for Bosch Sensortec BME680 sensor with gas,
+ humidity, pressure and temperatue sensing capability.
+endef
+
+$(eval $(call KernelPackage,iio-bme680))
+
+define KernelPackage/iio-bme680-i2c
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=BME680 gas/humidity/pressure/temperature sensor (I2C)
+  DEPENDS:=+kmod-iio-bme680 +kmod-regmap-i2c
+  KCONFIG:=CONFIG_BME680_I2C
+  FILES:=$(LINUX_DIR)/drivers/iio/chemical/bme680_i2c.ko
+  AUTOLOAD:=$(call AutoProbe,bme680-i2c)
+endef
+define KernelPackage/iio-bme680-i2c/description
+ This driver adds support for Bosch Sensortec's BME680 connected via I2C.
+endef
+
+$(eval $(call KernelPackage,iio-bme680-i2c))
+
+define KernelPackage/iio-bme680-spi
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=BME680 gas/humidity/pressure/temperature sensor (SPI)
+  DEPENDS:=+kmod-iio-bme680 +kmod-regmap-spi
+  KCONFIG:=CONFIG_BME680_SPI
+  FILES:=$(LINUX_DIR)/drivers/iio/chemical/bme680_spi.ko
+  AUTOLOAD:=$(call AutoProbe,bme680-spi)
+endef
+define KernelPackage/iio-bme680-spi/description
+ This driver adds support for Bosch Sensortec's BME680 connected via SPI.
+endef
+
+$(eval $(call KernelPackage,iio-bme680-spi))
+
+
+define KernelPackage/iio-bmp280
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=BMP180/BMP280/BME280 pressure/temperatur sensor
+  DEPENDS:=+kmod-iio-core +kmod-regmap-core
+  KCONFIG:=CONFIG_BMP280
+  FILES:=$(LINUX_DIR)/drivers/iio/pressure/bmp280.ko
+endef
+
+define KernelPackage/iio-bmp280/description
+ This driver adds support for Bosch Sensortec BMP180 and BMP280 pressure and
+ temperature sensors. Also supports the BME280 with an additional humidity
+ sensor channel.
+endef
+
+$(eval $(call KernelPackage,iio-bmp280))
+
+
+define KernelPackage/iio-bmp280-i2c
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=BMP180/BMP280/BME280 pressure/temperatur sensor (I2C)
+  DEPENDS:=+kmod-iio-bmp280 +kmod-i2c-core +kmod-regmap-i2c
+  KCONFIG:=CONFIG_BMP280_I2C
+  FILES:=$(LINUX_DIR)/drivers/iio/pressure/bmp280-i2c.ko
+  AUTOLOAD:=$(call AutoProbe,bmp280-i2c)
+endef
+define KernelPackage/iio-bmp280-i2c/description
+ This driver adds support for Bosch Sensortec's digital pressure and
+ temperature sensor connected via I2C.
+endef
+
+$(eval $(call KernelPackage,iio-bmp280-i2c))
+
+
+define KernelPackage/iio-bmp280-spi
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=BMP180/BMP280/BME280 pressure/temperatur sensor (SPI)
+  DEPENDS:=+kmod-iio-bmp280 +kmod-spi-bitbang
+  KCONFIG:=CONFIG_BMP280_SPI
+  FILES:=$(LINUX_DIR)/drivers/iio/pressure/bmp280-spi.ko
+  AUTOLOAD:=$(call AutoProbe,bmp280-spi)
+endef
+define KernelPackage/iio-bmp280-spi/description
+ This driver adds support for Bosch Sensortec's digital pressure and
+ temperature sensor connected via SPI.
+endef
+
+$(eval $(call KernelPackage,iio-bmp280-spi))
+
+define KernelPackage/iio-htu21
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-i2c-core +kmod-iio-core
+  TITLE:=HTU21 humidity & temperature sensor
+  KCONFIG:= \
+       CONFIG_HTU21 \
+       CONFIG_IIO_MS_SENSORS_I2C
+  FILES:= \
+       $(LINUX_DIR)/drivers/iio/humidity/htu21.ko \
+       $(LINUX_DIR)/drivers/iio/common/ms_sensors/ms_sensors_i2c.ko
+  AUTOLOAD:=$(call AutoLoad,56,htu21)
+endef
+
+define KernelPackage/iio-htu21/description
+ support for the Measurement Specialties HTU21 humidity and
+ temperature sensor.
+ This driver is also used for MS8607 temperature, pressure & humidity
+ sensor
+endef
+
+$(eval $(call KernelPackage,iio-htu21))
+
+
+define KernelPackage/iio-ccs811
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-i2c-core +kmod-iio-core +kmod-industrialio-triggered-buffer
+  TITLE:=AMS CCS811 VOC sensor
+  KCONFIG:= \
+	CONFIG_CCS811
+  FILES:= $(LINUX_DIR)/drivers/iio/chemical/ccs811.ko
+  AUTOLOAD:=$(call AutoLoad,56,ccs811)
+endef
+
+define KernelPackage/iio-ccs811/description
+  Support for the AMS CCS811 VOC (Volatile Organic Compounds) sensor
+endef
+
+$(eval $(call KernelPackage,iio-ccs811))
+
+
+define KernelPackage/iio-si7020
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-i2c-core +kmod-iio-core
+  TITLE:=Silicon Labs Si7020 sensor
+  KCONFIG:= CONFIG_SI7020
+  FILES:=$(LINUX_DIR)/drivers/iio/humidity/si7020.ko
+  AUTOLOAD:=$(call AutoLoad,56,si7020)
+endef
+
+define KernelPackage/iio-si7020/description
+ Support for Silicon Labs Si7020 family of relative humidity and
+ temperature sensors connected via I2C. Following models are usable:
+ Si7013, Si7020, Si7021, Hoperf TH06.
+endef
+
+$(eval $(call KernelPackage,iio-si7020))
+
+
+define KernelPackage/iio-st_accel
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=STMicroelectronics accelerometer 3-Axis Driver
+  DEPENDS:=+kmod-iio-core +kmod-regmap-core +kmod-industrialio-triggered-buffer
+  KCONFIG:= \
+	CONFIG_IIO_ST_ACCEL_3AXIS \
+	CONFIG_IIO_ST_SENSORS_CORE
+  FILES:= \
+	$(LINUX_DIR)/drivers/iio/accel/st_accel.ko \
+	$(LINUX_DIR)/drivers/iio/common/st_sensors/st_sensors.ko
+endef
+
+define KernelPackage/iio-st_accel/description
+ This package adds support for STMicroelectronics accelerometers:
+  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
+  LNG2DM, LIS3DE, LIS2DE12
+endef
+
+$(eval $(call KernelPackage,iio-st_accel))
+
+
+define KernelPackage/iio-st_accel-i2c
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=STMicroelectronics accelerometer 3-Axis Driver (I2C)
+  DEPENDS:=+kmod-iio-st_accel +kmod-i2c-core +kmod-regmap-i2c
+  KCONFIG:= CONFIG_IIO_ST_ACCEL_I2C_3AXIS
+  FILES:= \
+	$(LINUX_DIR)/drivers/iio/accel/st_accel_i2c.ko \
+	$(LINUX_DIR)/drivers/iio/common/st_sensors/st_sensors_i2c.ko
+  AUTOLOAD:=$(call AutoLoad,56,st_accel_i2c)
+endef
+
+define KernelPackage/iio-st_accel-i2c/description
+ This package adds support for STMicroelectronics I2C based accelerometers
+endef
+
+$(eval $(call KernelPackage,iio-st_accel-i2c))
+
+
+define KernelPackage/iio-st_accel-spi
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=STMicroelectronics accelerometer 3-Axis Driver (SPI)
+  DEPENDS:=+kmod-iio-st_accel +kmod-regmap-spi
+  KCONFIG:= CONFIG_IIO_ST_ACCEL_SPI_3AXIS
+  FILES:= \
+	$(LINUX_DIR)/drivers/iio/accel/st_accel_spi.ko \
+	$(LINUX_DIR)/drivers/iio/common/st_sensors/st_sensors_spi.ko
+  AUTOLOAD:=$(call AutoLoad,56,st_accel_spi)
+endef
+
+define KernelPackage/iio-st_accel-spi/description
+ This package adds support for STMicroelectronics SPI based accelerometers
+endef
+
+$(eval $(call KernelPackage,iio-st_accel-spi))
+
+
+define KernelPackage/iio-lsm6dsx
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-iio-core +kmod-iio-kfifo-buf +kmod-regmap-core
+  TITLE:=ST LSM6DSx driver for IMU MEMS sensors
+  KCONFIG:=CONFIG_IIO_ST_LSM6DSX
+  FILES:=$(LINUX_DIR)/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.ko
+  AUTOLOAD:=$(call AutoProbe,st_lsm6dsx)
+endef
+
+define KernelPackage/iio-lsm6dsx/description
+ Support for the ST LSM6DSx and related IMU MEMS sensors.
+endef
+
+$(eval $(call KernelPackage,iio-lsm6dsx))
+
+
+define KernelPackage/iio-lsm6dsx-i2c
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-iio-lsm6dsx +kmod-i2c-core +kmod-regmap-i2c
+  TITLE:=ST LSM6DSx driver for IMU MEMS sensors (I2C)
+  KCONFIG:=CONFIG_IIO_ST_LSM6DSX
+  FILES:=$(LINUX_DIR)/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.ko
+  AUTOLOAD:=$(call AutoProbe,st_lsm6dsx-i2c)
+endef
+
+define KernelPackage/iio-lsm6dsx-i2c/description
+ Support for the ST LSM6DSx and related IMU MEMS I2C sensors.
+endef
+
+$(eval $(call KernelPackage,iio-lsm6dsx-i2c))
+
+
+define KernelPackage/iio-lsm6dsx-spi
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-iio-lsm6dsx +kmod-regmap-spi
+  TITLE:=ST LSM6DSx driver for IMU MEMS sensors (SPI)
+  KCONFIG:=CONFIG_IIO_ST_LSM6DSX
+  FILES:=$(LINUX_DIR)/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.ko
+  AUTOLOAD:=$(call AutoProbe,st_lsm6dsx-spi)
+endef
+
+define KernelPackage/iio-lsm6dsx-spi/description
+ Support for the ST LSM6DSx and related IMU MEMS SPI sensors.
+endef
+
+$(eval $(call KernelPackage,iio-lsm6dsx-spi))
+
+
+define KernelPackage/iio-sps30
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=@!LINUX_4_14 +kmod-i2c-core +kmod-iio-core +kmod-industrialio-triggered-buffer +kmod-lib-crc8
+  TITLE:=Sensirion SPS30 particulate matter sensor
+  KCONFIG:=CONFIG_SPS30
+  FILES:=$(LINUX_DIR)/drivers/iio/chemical/sps30.ko
+  AUTOLOAD:=$(call AutoProbe,sps30)
+endef
+
+define KernelPackage/iio-sps30/description
+ Support for the Sensirion SPS30 particulate matter sensor.
+endef
+
+$(eval $(call KernelPackage,iio-sps30))
+
+
+define KernelPackage/iio-tsl4531
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-i2c-core +kmod-iio-core
+  TITLE:=TAOS TSL4531 ambient light sensor
+  KCONFIG:= CONFIG_TSL4531
+  FILES:=$(LINUX_DIR)/drivers/iio/light/tsl4531.ko
+  AUTOLOAD:=$(call AutoLoad,56,tsl4531)
+endef
+
+define KernelPackage/iio-tsl4531/description
+ Support for TAOS TSL4531x family of ambient light sensors
+ connected via I2C. Following models are usable:
+ TSL45311, TSL45313, TSL45315, TSL45317.
+endef
+
+$(eval $(call KernelPackage,iio-tsl4531))
+
+
+define KernelPackage/iio-fxas21002c
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=Freescale FXAS21002C 3-axis gyro driver
+  DEPENDS:=+kmod-iio-core +kmod-regmap-core +kmod-industrialio-triggered-buffer
+  KCONFIG:= CONFIG_FXAS21002C
+  FILES:=$(LINUX_DIR)/drivers/iio/gyro/fxas21002c_core.ko
+  AUTOLOAD:=$(call AutoLoad,56,fxas21002c)
+endef
+
+define KernelPackage/iio-fxas21002c/description
+ Support for Freescale FXAS21002C 3-axis gyro.
+endef
+
+$(eval $(call KernelPackage,iio-fxas21002c))
+
+
+define KernelPackage/iio-fxas21002c-i2c
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=Freescale FXAS21002C 3-axis gyro driver (I2C)
+  DEPENDS:=+kmod-iio-fxas21002c +kmod-i2c-core +kmod-regmap-i2c
+  KCONFIG:= CONFIG_FXAS21002C_I2C
+  FILES:=$(LINUX_DIR)/drivers/iio/gyro/fxas21002c_i2c.ko
+  AUTOLOAD:=$(call AutoLoad,56,fxas21002c_i2c)
+endef
+
+define KernelPackage/iio-fxas21002c-i2c/description
+ Support for Freescale FXAS21002C 3-axis gyro
+ connected via I2C.
+endef
+
+
+$(eval $(call KernelPackage,iio-fxas21002c-i2c))
+
+define KernelPackage/iio-fxas21002c-spi
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-iio-fxas21002c +kmod-regmap-spi
+  TITLE:=Freescale FXAS21002C 3-axis gyro driver (SPI)
+  KCONFIG:= CONFIG_FXAS21002C_SPI
+  FILES:=$(LINUX_DIR)/drivers/iio/gyro/fxas21002c_spi.ko
+  AUTOLOAD:=$(call AutoLoad,56,fxas21002c_spi)
+endef
+
+define KernelPackage/iio-fxas21002c-spi/description
+ Support for Freescale FXAS21002C 3-axis gyro
+ connected via SPI.
+endef
+
+$(eval $(call KernelPackage,iio-fxas21002c-spi))
+
+
+define KernelPackage/iio-fxos8700
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=Freescale FXOS8700 3-axis accelerometer driver
+  DEPENDS:=+kmod-iio-core +kmod-regmap-core
+  KCONFIG:= CONFIG_FXOS8700
+  FILES:=$(LINUX_DIR)/drivers/iio/imu/fxos8700_core.ko
+  AUTOLOAD:=$(call AutoLoad,56,fxos8700)
+endef
+
+define KernelPackage/iio-fxos8700/description
+ Support for Freescale FXOS8700 3-axis accelerometer.
+endef
+
+$(eval $(call KernelPackage,iio-fxos8700))
+
+
+define KernelPackage/iio-fxos8700-i2c
+  SUBMENU:=$(IIO_MENU)
+  TITLE:=Freescale FXOS8700 3-axis acceleromter driver (I2C)
+  DEPENDS:=+kmod-iio-fxos8700 +kmod-i2c-core +kmod-regmap-i2c
+  KCONFIG:= CONFIG_FXOS8700_I2C
+  FILES:=$(LINUX_DIR)/drivers/iio/imu/fxos8700_i2c.ko
+  AUTOLOAD:=$(call AutoLoad,56,fxos8700_i2c)
+endef
+
+define KernelPackage/iio-fxos8700-i2c/description
+ Support for Freescale FXOS8700 3-axis accelerometer
+ connected via I2C.
+endef
+
+
+$(eval $(call KernelPackage,iio-fxos8700-i2c))
+
+define KernelPackage/iio-fxos8700-spi
+  SUBMENU:=$(IIO_MENU)
+  DEPENDS:=+kmod-iio-fxos8700 +kmod-regmap-spi
+  TITLE:=Freescale FXOS8700 3-axis accelerometer driver (SPI)
+  KCONFIG:= CONFIG_FXOS8700_SPI
+  FILES:=$(LINUX_DIR)/drivers/iio/imu/fxos8700_spi.ko
+  AUTOLOAD:=$(call AutoLoad,56,fxos8700_spi)
+endef
+
+define KernelPackage/iio-fxos8700-spi/description
+ Support for Freescale FXOS8700 3-axis accelerometer
+ connected via SPI.
+endef
+
+$(eval $(call KernelPackage,iio-fxos8700-spi))

feeds/ipq807x/linux/modules/input.mk

@@ -0,0 +1,229 @@
+#
+# Copyright (C) 2006-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+INPUT_MODULES_MENU:=Input modules
+
+define KernelPackage/hid
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=HID Devices
+  DEPENDS:=+kmod-input-core +kmod-input-evdev
+  KCONFIG:=CONFIG_HID CONFIG_HIDRAW=y CONFIG_HID_BATTERY_STRENGTH=y
+  FILES:=$(LINUX_DIR)/drivers/hid/hid.ko
+  AUTOLOAD:=$(call AutoLoad,61,hid)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for HID devices
+endef
+
+$(eval $(call KernelPackage,hid))
+
+define KernelPackage/hid-generic
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=Generic HID device support
+  DEPENDS:=+kmod-hid
+  KCONFIG:=CONFIG_HID_GENERIC
+  FILES:=$(LINUX_DIR)/drivers/hid/hid-generic.ko
+  AUTOLOAD:=$(call AutoProbe,hid-generic)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for generic HID device (e.g. keyboards and mice) support
+endef
+
+$(eval $(call KernelPackage,hid-generic))
+
+define KernelPackage/input-core
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=Input device core
+  KCONFIG:=CONFIG_INPUT
+  FILES:=$(LINUX_DIR)/drivers/input/input-core.ko
+endef
+
+define KernelPackage/input-core/description
+ Kernel modules for support of input device
+endef
+
+$(eval $(call KernelPackage,input-core))
+
+
+define KernelPackage/input-evdev
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=Input event device
+  DEPENDS:=+kmod-input-core
+  KCONFIG:=CONFIG_INPUT_EVDEV
+  FILES:=$(LINUX_DIR)/drivers/input/evdev.ko
+  AUTOLOAD:=$(call AutoLoad,60,evdev)
+endef
+
+define KernelPackage/input-evdev/description
+ Kernel modules for support of input device events
+endef
+
+$(eval $(call KernelPackage,input-evdev))
+
+
+define KernelPackage/input-gpio-keys
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=GPIO key support
+  DEPENDS:= @GPIO_SUPPORT +kmod-input-core
+  KCONFIG:= \
+	CONFIG_KEYBOARD_GPIO \
+	CONFIG_INPUT_KEYBOARD=y
+  FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.ko
+  AUTOLOAD:=$(call AutoProbe,gpio_keys,1)
+endef
+
+define KernelPackage/input-gpio-keys/description
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
+
+ See also gpio-button-hotplug which is an alternative, lower overhead
+ implementation that generates uevents instead of kernel input events.
+endef
+
+$(eval $(call KernelPackage,input-gpio-keys))
+
+
+define KernelPackage/input-gpio-keys-polled
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=Polled GPIO key support
+  DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
+  KCONFIG:= \
+	CONFIG_KEYBOARD_GPIO_POLLED \
+	CONFIG_INPUT_KEYBOARD=y
+  FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys_polled.ko
+  AUTOLOAD:=$(call AutoProbe,gpio_keys_polled,1)
+endef
+
+define KernelPackage/input-gpio-keys-polled/description
+ Kernel module for support polled GPIO keys input device
+
+ See also gpio-button-hotplug which is an alternative, lower overhead
+ implementation that generates uevents instead of kernel input events.
+endef
+
+$(eval $(call KernelPackage,input-gpio-keys-polled))
+
+
+define KernelPackage/input-gpio-encoder
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=GPIO rotary encoder
+  DEPENDS:=@GPIO_SUPPORT +kmod-input-core
+  KCONFIG:=CONFIG_INPUT_GPIO_ROTARY_ENCODER
+  FILES:=$(LINUX_DIR)/drivers/input/misc/rotary_encoder.ko
+  AUTOLOAD:=$(call AutoProbe,rotary_encoder)
+endef
+
+define KernelPackage/input-gpio-encoder/description
+ Kernel module to use rotary encoders connected to GPIO pins
+endef
+
+$(eval $(call KernelPackage,input-gpio-encoder))
+
+
+define KernelPackage/input-joydev
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=Joystick device support
+  DEPENDS:=+kmod-input-core
+  KCONFIG:=CONFIG_INPUT_JOYDEV
+  FILES:=$(LINUX_DIR)/drivers/input/joydev.ko
+  AUTOLOAD:=$(call AutoProbe,joydev)
+endef
+
+define KernelPackage/input-joydev/description
+ Kernel module for joystick support
+endef
+
+$(eval $(call KernelPackage,input-joydev))
+
+
+define KernelPackage/input-polldev
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=Polled Input device support
+  DEPENDS:=+kmod-input-core
+  KCONFIG:=CONFIG_INPUT_POLLDEV
+  FILES:=$(LINUX_DIR)/drivers/input/input-polldev.ko
+endef
+
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
+endef
+
+$(eval $(call KernelPackage,input-polldev))
+
+
+define KernelPackage/input-matrixkmap
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=Input matrix devices support
+  DEPENDS:=+kmod-input-core
+  KCONFIG:=CONFIG_INPUT_MATRIXKMAP
+  FILES:=$(LINUX_DIR)/drivers/input/matrix-keymap.ko
+  AUTOLOAD:=$(call AutoProbe,matrix-keymap)
+endef
+
+define KernelPackage/input-matrixkmap/description
+ Kernel module support for input matrix devices
+endef
+
+$(eval $(call KernelPackage,input-matrixkmap))
+
+
+define KernelPackage/input-touchscreen-ads7846
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens
+  DEPENDS:=+kmod-hwmon-core +kmod-input-core +kmod-spi-bitbang
+  KCONFIG:= \
+	CONFIG_INPUT_TOUCHSCREEN=y \
+	CONFIG_TOUCHSCREEN_PROPERTIES=y \
+	CONFIG_TOUCHSCREEN_ADS7846
+  FILES:=$(LINUX_DIR)/drivers/input/touchscreen/ads7846.ko \
+	$(LINUX_DIR)/drivers/input/touchscreen/of_touchscreen.ko
+  AUTOLOAD:=$(call AutoProbe,ads7846)
+endef
+
+define KernelPackage/input-touchscreen-ads7846/description
+  Kernel module for ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens
+endef
+
+$(eval $(call KernelPackage,input-touchscreen-ads7846))
+
+
+define KernelPackage/keyboard-imx
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=IMX keypad support
+  DEPENDS:=@(TARGET_mxs||TARGET_imx6) +kmod-input-matrixkmap
+  KCONFIG:= \
+	CONFIG_KEYBOARD_IMX \
+	CONFIG_INPUT_KEYBOARD=y
+  FILES:=$(LINUX_DIR)/drivers/input/keyboard/imx_keypad.ko
+  AUTOLOAD:=$(call AutoProbe,imx_keypad)
+endef
+
+define KernelPackage/keyboard-imx/description
+ Enable support for IMX keypad port.
+endef
+
+$(eval $(call KernelPackage,keyboard-imx))
+
+
+define KernelPackage/input-uinput
+  SUBMENU:=$(INPUT_MODULES_MENU)
+  TITLE:=user input module
+  DEPENDS:=+kmod-input-core
+  KCONFIG:= \
+	CONFIG_INPUT_MISC=y \
+	CONFIG_INPUT_UINPUT
+  FILES:=$(LINUX_DIR)/drivers/input/misc/uinput.ko
+  AUTOLOAD:=$(call AutoProbe,uinput)
+endef
+
+define KernelPackage/input-uinput/description
+  user input modules needed for bluez
+endef
+
+$(eval $(call KernelPackage,input-uinput))

feeds/ipq807x/linux/modules/leds.mk

@@ -0,0 +1,116 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+LEDS_MENU:=LED modules
+
+define KernelPackage/leds-gpio
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=GPIO LED support
+  DEPENDS:= @GPIO_SUPPORT
+  KCONFIG:=CONFIG_LEDS_GPIO
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.ko
+  AUTOLOAD:=$(call AutoLoad,60,leds-gpio,1)
+endef
+
+define KernelPackage/leds-gpio/description
+ Kernel module for LEDs on GPIO lines
+endef
+
+$(eval $(call KernelPackage,leds-gpio))
+
+LED_TRIGGER_DIR=$(LINUX_DIR)/drivers/leds/trigger
+
+define KernelPackage/ledtrig-activity
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED Activity Trigger
+  KCONFIG:=CONFIG_LEDS_TRIGGER_ACTIVITY
+  FILES:=$(LED_TRIGGER_DIR)/ledtrig-activity.ko
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-activity)
+endef
+
+define KernelPackage/ledtrig-activity/description
+ Kernel module that allows LEDs to blink based on system load
+endef
+
+$(eval $(call KernelPackage,ledtrig-activity))
+
+define KernelPackage/ledtrig-gpio
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED GPIO Trigger
+  KCONFIG:=CONFIG_LEDS_TRIGGER_GPIO
+  FILES:=$(LED_TRIGGER_DIR)/ledtrig-gpio.ko
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-gpio)
+endef
+
+define KernelPackage/ledtrig-gpio/description
+ Kernel module that allows LEDs to be controlled by gpio events
+endef
+
+$(eval $(call KernelPackage,ledtrig-gpio))
+
+
+define KernelPackage/ledtrig-transient
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED Transient Trigger
+  KCONFIG:=CONFIG_LEDS_TRIGGER_TRANSIENT
+  FILES:=$(LED_TRIGGER_DIR)/ledtrig-transient.ko
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-transient,1)
+endef
+
+define KernelPackage/ledtrig-transient/description
+ Kernel module that allows LEDs one time activation of a transient state.
+endef
+
+$(eval $(call KernelPackage,ledtrig-transient))
+
+
+define KernelPackage/ledtrig-oneshot
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED One-Shot Trigger
+  KCONFIG:=CONFIG_LEDS_TRIGGER_ONESHOT
+  FILES:=$(LED_TRIGGER_DIR)/ledtrig-oneshot.ko
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-oneshot)
+endef
+
+define KernelPackage/ledtrig-oneshot/description
+ Kernel module that allows LEDs to be triggered by sporadic events in
+ one-shot pulses
+endef
+
+$(eval $(call KernelPackage,ledtrig-oneshot))
+
+
+define KernelPackage/leds-pca963x
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=PCA963x LED support
+  DEPENDS:=+kmod-i2c-core
+  KCONFIG:=CONFIG_LEDS_PCA963X
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-pca963x.ko
+  AUTOLOAD:=$(call AutoLoad,60,leds-pca963x,1)
+endef
+
+define KernelPackage/leds-pca963x/description
+ Driver for the NXP PCA963x I2C LED controllers.
+endef
+
+$(eval $(call KernelPackage,leds-pca963x))
+
+
+define KernelPackage/leds-pwm
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=PWM driven LED Support
+  KCONFIG:=CONFIG_LEDS_PWM
+  DEPENDS:= @PWM_SUPPORT
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-pwm.ko
+  AUTOLOAD:=$(call AutoLoad,60,leds-pwm,1)
+endef
+
+define KernelPackage/leds-pwm/description
+ This option enables support for pwm driven LEDs
+endef
+
+$(eval $(call KernelPackage,leds-pwm))

feeds/ipq807x/linux/modules/lib.mk

@@ -0,0 +1,274 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+LIB_MENU:=Libraries
+
+define KernelPackage/lib-crc-ccitt
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=CRC-CCITT support
+  KCONFIG:=CONFIG_CRC_CCITT
+  FILES:=$(LINUX_DIR)/lib/crc-ccitt.ko
+  AUTOLOAD:=$(call AutoProbe,crc-ccitt)
+endef
+
+define KernelPackage/lib-crc-ccitt/description
+ Kernel module for CRC-CCITT support
+endef
+
+$(eval $(call KernelPackage,lib-crc-ccitt))
+
+
+define KernelPackage/lib-crc-itu-t
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=CRC ITU-T V.41 support
+  KCONFIG:=CONFIG_CRC_ITU_T
+  FILES:=$(LINUX_DIR)/lib/crc-itu-t.ko
+  AUTOLOAD:=$(call AutoProbe,crc-itu-t)
+endef
+
+define KernelPackage/lib-crc-itu-t/description
+ Kernel module for CRC ITU-T V.41 support
+endef
+
+$(eval $(call KernelPackage,lib-crc-itu-t))
+
+
+define KernelPackage/lib-crc7
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=CRC7 support
+  KCONFIG:=CONFIG_CRC7
+  FILES:=$(LINUX_DIR)/lib/crc7.ko
+  AUTOLOAD:=$(call AutoProbe,crc7)
+endef
+
+define KernelPackage/lib-crc7/description
+ Kernel module for CRC7 support
+endef
+
+$(eval $(call KernelPackage,lib-crc7))
+
+
+define KernelPackage/lib-crc8
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=CRC8 support
+  KCONFIG:=CONFIG_CRC8
+  FILES:=$(LINUX_DIR)/lib/crc8.ko
+  AUTOLOAD:=$(call AutoProbe,crc8)
+endef
+
+define KernelPackage/lib-crc8/description
+ Kernel module for CRC8 support
+endef
+
+$(eval $(call KernelPackage,lib-crc8))
+
+
+define KernelPackage/lib-crc16
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=CRC16 support
+  KCONFIG:=CONFIG_CRC16
+  FILES:=$(LINUX_DIR)/lib/crc16.ko
+  AUTOLOAD:=$(call AutoLoad,20,crc16,1)
+endef
+
+define KernelPackage/lib-crc16/description
+ Kernel module for CRC16 support
+endef
+
+$(eval $(call KernelPackage,lib-crc16))
+
+
+define KernelPackage/lib-crc32c
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=CRC32 support
+  KCONFIG:=CONFIG_LIBCRC32C
+  DEPENDS:=+kmod-crypto-crc32c
+  FILES:=$(LINUX_DIR)/lib/libcrc32c.ko
+  AUTOLOAD:=$(call AutoProbe,libcrc32c)
+endef
+
+define KernelPackage/lib-crc32c/description
+ Kernel module for CRC32 support
+endef
+
+$(eval $(call KernelPackage,lib-crc32c))
+
+
+define KernelPackage/lib-lzo
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=LZO support
+  DEPENDS:=+kmod-crypto-acompress
+  KCONFIG:= \
+	CONFIG_CRYPTO_LZO \
+	CONFIG_LZO_COMPRESS \
+	CONFIG_LZO_DECOMPRESS
+  HIDDEN:=1
+  FILES:= \
+	$(LINUX_DIR)/crypto/lzo.ko \
+	$(LINUX_DIR)/lib/lzo/lzo_compress.ko \
+	$(LINUX_DIR)/lib/lzo/lzo_decompress.ko
+  AUTOLOAD:=$(call AutoProbe,lzo lzo_compress lzo_decompress)
+endef
+
+define KernelPackage/lib-lzo/description
+ Kernel module for LZO compression/decompression support
+endef
+
+$(eval $(call KernelPackage,lib-lzo))
+
+
+define KernelPackage/lib-zstd
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=ZSTD support
+  DEPENDS:=+kmod-crypto-acompress
+  KCONFIG:= \
+	CONFIG_CRYPTO_ZSTD \
+	CONFIG_ZSTD_COMPRESS \
+	CONFIG_ZSTD_DECOMPRESS \
+	CONFIG_XXHASH
+  FILES:= \
+	$(LINUX_DIR)/crypto/zstd.ko \
+	$(LINUX_DIR)/lib/xxhash.ko \
+	$(LINUX_DIR)/lib/zstd/zstd_compress.ko \
+	$(LINUX_DIR)/lib/zstd/zstd_decompress.ko
+  AUTOLOAD:=$(call AutoProbe,xxhash zstd zstd_compress zstd_decompress)
+endef
+
+define KernelPackage/lib-zstd/description
+ Kernel module for ZSTD compression/decompression support
+endef
+
+$(eval $(call KernelPackage,lib-zstd))
+
+
+define KernelPackage/lib-lz4
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=LZ4 support
+  DEPENDS:=+kmod-crypto-acompress
+  KCONFIG:= \
+	CONFIG_CRYPTO_LZ4 \
+	CONFIG_LZ4_COMPRESS \
+	CONFIG_LZ4_DECOMPRESS
+  FILES:= \
+	$(LINUX_DIR)/crypto/lz4.ko \
+	$(LINUX_DIR)/lib/lz4/lz4_compress.ko \
+	$(LINUX_DIR)/lib/lz4/lz4_decompress.ko
+  AUTOLOAD:=$(call AutoProbe,lz4 lz4_compress lz4_decompress)
+endef
+
+define KernelPackage/lib-lz4/description
+ Kernel module for LZ4 compression/decompression support
+endef
+
+$(eval $(call KernelPackage,lib-lz4))
+
+
+define KernelPackage/lib-raid6
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=RAID6 algorithm support
+  HIDDEN:=1
+  KCONFIG:=CONFIG_RAID6_PQ
+  FILES:=$(LINUX_DIR)/lib/raid6/raid6_pq.ko
+  AUTOLOAD:=$(call AutoProbe,raid6_pq)
+endef
+
+define KernelPackage/lib-raid6/description
+ Kernel module for RAID6 algorithms
+endef
+
+$(eval $(call KernelPackage,lib-raid6))
+
+
+define KernelPackage/lib-xor
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=XOR blocks algorithm support
+  HIDDEN:=1
+  KCONFIG:=CONFIG_XOR_BLOCKS
+ifneq ($(wildcard $(LINUX_DIR)/arch/$(LINUX_KARCH)/lib/xor-neon.ko),)
+  FILES:= \
+    $(LINUX_DIR)/crypto/xor.ko \
+    $(LINUX_DIR)/arch/$(LINUX_KARCH)/lib/xor-neon.ko
+  AUTOLOAD:=$(call AutoProbe,xor-neon xor)
+else
+  FILES:=$(LINUX_DIR)/crypto/xor.ko
+  AUTOLOAD:=$(call AutoProbe,xor)
+endif
+endef
+
+define KernelPackage/lib-xor/description
+ Kernel module for XOR blocks algorithms
+endef
+
+$(eval $(call KernelPackage,lib-xor))
+
+
+define KernelPackage/lib-textsearch
+SUBMENU:=$(LIB_MENU)
+  TITLE:=Textsearch support
+  KCONFIG:= \
+    CONFIG_TEXTSEARCH=y \
+    CONFIG_TEXTSEARCH_KMP \
+    CONFIG_TEXTSEARCH_BM \
+    CONFIG_TEXTSEARCH_FSM
+  FILES:= \
+    $(LINUX_DIR)/lib/ts_kmp.ko \
+    $(LINUX_DIR)/lib/ts_bm.ko \
+    $(LINUX_DIR)/lib/ts_fsm.ko
+  AUTOLOAD:=$(call AutoProbe,ts_kmp ts_bm ts_fsm)
+endef
+
+$(eval $(call KernelPackage,lib-textsearch))
+
+
+define KernelPackage/lib-zlib-inflate
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=Zlib support
+  HIDDEN:=1
+  KCONFIG:=CONFIG_ZLIB_INFLATE
+  FILES:=$(LINUX_DIR)/lib/zlib_inflate/zlib_inflate.ko
+  AUTOLOAD:=$(call AutoProbe,zlib_inflate)
+endef
+
+$(eval $(call KernelPackage,lib-zlib-inflate))
+
+
+define KernelPackage/lib-zlib-deflate
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=Zlib support
+  HIDDEN:=1
+  KCONFIG:=CONFIG_ZLIB_DEFLATE
+  FILES:=$(LINUX_DIR)/lib/zlib_deflate/zlib_deflate.ko
+  AUTOLOAD:=$(call AutoProbe,zlib_deflate)
+endef
+
+$(eval $(call KernelPackage,lib-zlib-deflate))
+
+
+define KernelPackage/lib-cordic
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=Cordic function support
+  KCONFIG:=CONFIG_CORDIC
+  FILES:=$(LINUX_DIR)/lib/math/cordic.ko
+  AUTOLOAD:=$(call AutoProbe,cordic)
+endef
+
+define KernelPackage/lib-cordic/description
+ Kernel module for Cordic function support
+endef
+
+$(eval $(call KernelPackage,lib-cordic))
+
+
+define KernelPackage/asn1-decoder
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=Simple ASN1 decoder
+  KCONFIG:= CONFIG_ASN1
+  HIDDEN:=1
+  FILES:=$(LINUX_DIR)/lib/asn1_decoder.ko
+endef
+
+$(eval $(call KernelPackage,asn1-decoder))

feeds/ipq807x/linux/modules/nls.mk

@@ -0,0 +1,339 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define KernelPackage/nls-base
+  SUBMENU:=Native Language Support
+  TITLE:=Native Language Support
+  KCONFIG:=CONFIG_NLS
+  FILES:=$(LINUX_DIR)/fs/nls/nls_base.ko
+endef
+
+define KernelPackage/nls-base/description
+ Kernel module for NLS (Native Language Support)
+endef
+
+$(eval $(call KernelPackage,nls-base))
+
+
+define KernelPackage/nls-cp437
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 437 (United States, Canada)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_437
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp437.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp437)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp437/description
+ Kernel module for NLS Codepage 437 (United States, Canada)
+endef
+
+$(eval $(call KernelPackage,nls-cp437))
+
+
+define KernelPackage/nls-cp775
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 775 (Baltic Rim)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_775
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp775.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp775)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp775/description
+ Kernel module for NLS Codepage 775 (Baltic Rim)
+endef
+
+$(eval $(call KernelPackage,nls-cp775))
+
+
+define KernelPackage/nls-cp850
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 850 (Europe)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_850
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp850.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp850)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp850/description
+ Kernel module for NLS Codepage 850 (Europe)
+endef
+
+$(eval $(call KernelPackage,nls-cp850))
+
+
+define KernelPackage/nls-cp852
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 852 (Europe)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_852
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp852.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp852)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp852/description
+ Kernel module for NLS Codepage 852 (Europe)
+endef
+
+$(eval $(call KernelPackage,nls-cp852))
+
+
+define KernelPackage/nls-cp862
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 862 (Hebrew)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_862
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp862.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp862)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp862/description
+  Kernel module for NLS Codepage 862 (Hebrew)
+endef
+
+$(eval $(call KernelPackage,nls-cp862))
+
+
+define KernelPackage/nls-cp864
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 864 (Arabic)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_864
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp864.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp864)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp864/description
+  Kernel module for NLS Codepage 864 (Arabic)
+endef
+
+$(eval $(call KernelPackage,nls-cp864))
+
+
+define KernelPackage/nls-cp866
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 866 (Cyrillic)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_866
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp866.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp866)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp866/description
+  Kernel module for NLS Codepage 866 (Cyrillic)
+endef
+
+$(eval $(call KernelPackage,nls-cp866))
+
+
+define KernelPackage/nls-cp932
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 932 (Japanese)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_932
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp932.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp932)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp932/description
+  Kernel module for NLS Codepage 932 (Japanese)
+endef
+
+$(eval $(call KernelPackage,nls-cp932))
+
+
+define KernelPackage/nls-cp936
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 936 (Simplified Chinese)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_936
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp936.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp936)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp936/description
+  Kernel module for NLS Codepage 936 (Simplified Chinese)
+endef
+
+$(eval $(call KernelPackage,nls-cp936))
+
+
+define KernelPackage/nls-cp950
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 950 (Traditional Chinese)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_950
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp950.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp950)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp950/description
+  Kernel module for NLS Codepage 950 (Traditional Chinese)
+endef
+
+$(eval $(call KernelPackage,nls-cp950))
+
+
+define KernelPackage/nls-cp1250
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 1250 (Eastern Europe)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_1250
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp1250.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp1250)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp1250/description
+ Kernel module for NLS Codepage 1250 (Eastern Europe)
+endef
+
+$(eval $(call KernelPackage,nls-cp1250))
+
+
+define KernelPackage/nls-cp1251
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 1251 (Russian)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_1251
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp1251.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp1251)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp1251/description
+ Kernel module for NLS Codepage 1251 (Russian)
+endef
+
+$(eval $(call KernelPackage,nls-cp1251))
+
+
+define KernelPackage/nls-iso8859-1
+  SUBMENU:=Native Language Support
+  TITLE:=ISO 8859-1 (Latin 1; Western European Languages)
+  KCONFIG:=CONFIG_NLS_ISO8859_1
+  FILES:=$(LINUX_DIR)/fs/nls/nls_iso8859-1.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_iso8859-1)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-iso8859-1/description
+ Kernel module for NLS ISO 8859-1 (Latin 1)
+endef
+
+$(eval $(call KernelPackage,nls-iso8859-1))
+
+
+define KernelPackage/nls-iso8859-2
+  SUBMENU:=Native Language Support
+  TITLE:=ISO 8859-2 (Latin 2; Central European Languages)
+  KCONFIG:=CONFIG_NLS_ISO8859_2
+  FILES:=$(LINUX_DIR)/fs/nls/nls_iso8859-2.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_iso8859-2)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-iso8859-2/description
+ Kernel module for NLS ISO 8859-2 (Latin 2)
+endef
+
+$(eval $(call KernelPackage,nls-iso8859-2))
+
+
+define KernelPackage/nls-iso8859-6
+  SUBMENU:=Native Language Support
+  TITLE:=ISO 8859-6 (Arabic)
+  KCONFIG:=CONFIG_NLS_ISO8859_6
+  FILES:=$(LINUX_DIR)/fs/nls/nls_iso8859-6.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_iso8859-6)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-iso8859-6/description
+ Kernel module for NLS ISO 8859-6 (Arabic)
+endef
+
+$(eval $(call KernelPackage,nls-iso8859-6))
+
+
+define KernelPackage/nls-iso8859-8
+  SUBMENU:=Native Language Support
+  TITLE:=ISO 8859-8, CP1255 (Hebrew)
+  KCONFIG:=CONFIG_NLS_ISO8859_8
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp1255.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp1255)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-iso8859-8/description
+ Kernel module for Hebrew charsets (ISO-8859-8, CP1255)
+endef
+
+$(eval $(call KernelPackage,nls-iso8859-8))
+
+
+define KernelPackage/nls-iso8859-13
+  SUBMENU:=Native Language Support
+  TITLE:=ISO 8859-13 (Latin 7; Baltic)
+  KCONFIG:=CONFIG_NLS_ISO8859_13
+  FILES:=$(LINUX_DIR)/fs/nls/nls_iso8859-13.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_iso8859-13)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-iso8859-13/description
+ Kernel module for NLS ISO 8859-13 (Latin 7; Baltic)
+endef
+
+$(eval $(call KernelPackage,nls-iso8859-13))
+
+
+define KernelPackage/nls-iso8859-15
+  SUBMENU:=Native Language Support
+  TITLE:=ISO 8859-15 (Latin 9; Western, with Euro symbol)
+  KCONFIG:=CONFIG_NLS_ISO8859_15
+  FILES:=$(LINUX_DIR)/fs/nls/nls_iso8859-15.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_iso8859-15)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-iso8859-15/description
+ Kernel module for NLS ISO 8859-15 (Latin 9)
+endef
+
+$(eval $(call KernelPackage,nls-iso8859-15))
+
+
+define KernelPackage/nls-koi8r
+  SUBMENU:=Native Language Support
+  TITLE:=KOI8-R (Russian)
+  KCONFIG:=CONFIG_NLS_KOI8_R
+  FILES:=$(LINUX_DIR)/fs/nls/nls_koi8-r.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_koi8-r)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-koi8r/description
+ Kernel module for NLS KOI8-R (Russian)
+endef
+
+$(eval $(call KernelPackage,nls-koi8r))
+
+
+define KernelPackage/nls-utf8
+  SUBMENU:=Native Language Support
+  TITLE:=UTF-8
+  KCONFIG:=CONFIG_NLS_UTF8
+  FILES:=$(LINUX_DIR)/fs/nls/nls_utf8.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_utf8)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-utf8/description
+ Kernel module for NLS UTF-8
+endef
+
+$(eval $(call KernelPackage,nls-utf8))

feeds/ipq807x/linux/modules/pcmcia.mk

@@ -0,0 +1,113 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+PCMCIA_MENU:=PCMCIA support
+
+define KernelPackage/pcmcia-core
+  SUBMENU:=$(PCMCIA_MENU)
+  TITLE:=PCMCIA/CardBus support
+  DEPENDS:=@PCMCIA_SUPPORT
+  KCONFIG:= \
+	CONFIG_PCMCIA \
+	CONFIG_PCMCIA_LOAD_CIS=y \
+	CONFIG_CARDBUS \
+	CONFIG_PCCARD \
+	PCMCIA_DEBUG=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.ko \
+	$(LINUX_DIR)/drivers/pcmcia/pcmcia.ko
+  AUTOLOAD:=$(call AutoLoad,25,pcmcia_core pcmcia)
+endef
+
+define KernelPackage/pcmcia-core/description
+ Kernel support for PCMCIA/CardBus controllers
+endef
+
+$(eval $(call KernelPackage,pcmcia-core))
+
+
+define AddDepends/pcmcia
+  SUBMENU:=$(PCMCIA_MENU)
+  DEPENDS+=kmod-pcmcia-core $(1)
+endef
+
+
+define KernelPackage/pcmcia-rsrc
+  TITLE:=PCMCIA resource support
+  KCONFIG:=CONFIG_PCCARD_NONSTATIC=y
+  FILES:=$(LINUX_DIR)/drivers/pcmcia/pcmcia_rsrc.ko
+  AUTOLOAD:=$(call AutoLoad,26,pcmcia_rsrc)
+  $(call AddDepends/pcmcia)
+endef
+
+define KernelPackage/pcmcia-rsrc/description
+ Kernel support for PCMCIA resource allocation
+endef
+
+$(eval $(call KernelPackage,pcmcia-rsrc))
+
+
+define KernelPackage/pcmcia-yenta
+  TITLE:=yenta socket driver
+  KCONFIG:=CONFIG_YENTA
+  FILES:=$(LINUX_DIR)/drivers/pcmcia/yenta_socket.ko
+  AUTOLOAD:=$(call AutoLoad,41,yenta_socket)
+  DEPENDS:=+kmod-pcmcia-rsrc
+  $(call AddDepends/pcmcia)
+endef
+
+$(eval $(call KernelPackage,pcmcia-yenta))
+
+
+define KernelPackage/pcmcia-serial
+  TITLE:=Serial devices support
+  KCONFIG:= \
+	CONFIG_PCMCIA_SERIAL_CS \
+	CONFIG_SERIAL_8250_CS
+  FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/serial_cs.ko
+  AUTOLOAD:=$(call AutoLoad,45,serial_cs)
+  DEPENDS:=+kmod-serial-8250
+  $(call AddDepends/pcmcia)
+endef
+
+define KernelPackage/pcmcia-serial/description
+ Kernel support for PCMCIA/CardBus serial devices
+endef
+
+$(eval $(call KernelPackage,pcmcia-serial))
+
+
+define KernelPackage/pcmcia-pd6729
+  TITLE:=Cirrus PD6729 compatible bridge support
+  KCONFIG:=CONFIG_PD6729
+  FILES:=$(LINUX_DIR)/drivers/pcmcia/pd6729.ko
+  AUTOLOAD:=$(call AutoLoad,41,pd6729)
+  DEPENDS:=+kmod-pcmcia-rsrc
+  $(call AddDepends/pcmcia)
+endef
+
+define KernelPackage/pcmcia-pd6729/description
+ Kernel support for the Cirrus PD6729 PCI-to-PCMCIA bridge
+endef
+
+$(eval $(call KernelPackage,pcmcia-pd6729))
+
+
+define KernelPackage/pcmcia-nozomi
+  TITLE:=Option Fusion+ card
+  KCONFIG:=CONFIG_NOZOMI
+  FILES:=$(LINUX_DIR)/drivers/tty/nozomi.ko
+  AUTOLOAD:=$(call AutoLoad,60,nozomi)
+  DEPENDS:=+kmod-pcmcia-rsrc
+  $(call AddDepends/pcmcia)
+endef
+
+define KernelPackage/pcmcia-nozomi/description
+ Kernel support for Option Fusion+ card
+endef
+
+$(eval $(call KernelPackage,pcmcia-nozomi))

feeds/ipq807x/linux/modules/sound.mk

@@ -0,0 +1,534 @@
+#
+# Copyright (C) 2006-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+SOUND_MENU:=Sound Support
+
+# allow targets to override the soundcore stuff
+SOUNDCORE_LOAD ?= \
+	soundcore \
+	snd \
+	snd-hwdep \
+	snd-seq-device \
+	snd-rawmidi \
+	snd-timer \
+	snd-pcm \
+	snd-mixer-oss \
+	snd-pcm-oss \
+	snd-compress
+
+SOUNDCORE_FILES ?= \
+	$(LINUX_DIR)/sound/soundcore.ko \
+	$(LINUX_DIR)/sound/core/snd.ko \
+	$(LINUX_DIR)/sound/core/snd-hwdep.ko \
+	$(LINUX_DIR)/sound/core/snd-seq-device.ko \
+	$(LINUX_DIR)/sound/core/snd-rawmidi.ko \
+	$(LINUX_DIR)/sound/core/snd-timer.ko \
+	$(LINUX_DIR)/sound/core/snd-pcm.ko \
+	$(LINUX_DIR)/sound/core/oss/snd-mixer-oss.ko \
+	$(LINUX_DIR)/sound/core/oss/snd-pcm-oss.ko \
+	$(LINUX_DIR)/sound/core/snd-compress.ko
+
+SOUNDCORE_LOAD += \
+	$(if $(CONFIG_SND_DMAENGINE_PCM),snd-pcm-dmaengine)
+
+SOUNDCORE_FILES += \
+	$(if $(CONFIG_SND_DMAENGINE_PCM),$(LINUX_DIR)/sound/core/snd-pcm-dmaengine.ko)
+
+define KernelPackage/sound-core
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=Sound support
+  DEPENDS:=@AUDIO_SUPPORT +kmod-input-core
+  KCONFIG:= \
+	CONFIG_SOUND \
+	CONFIG_SND \
+	CONFIG_SND_HWDEP \
+	CONFIG_SND_RAWMIDI \
+	CONFIG_SND_TIMER \
+	CONFIG_SND_PCM \
+	CONFIG_SND_PCM_TIMER=y \
+	CONFIG_SND_SEQUENCER \
+	CONFIG_SND_VIRMIDI \
+	CONFIG_SND_SEQ_DUMMY \
+	CONFIG_SND_SEQUENCER_OSS=y \
+	CONFIG_HOSTAUDIO \
+	CONFIG_SND_PCM_OSS \
+	CONFIG_SND_MIXER_OSS \
+	CONFIG_SOUND_OSS_CORE_PRECLAIM=y \
+	CONFIG_SND_COMPRESS_OFFLOAD
+  FILES:=$(SOUNDCORE_FILES)
+  AUTOLOAD:=$(call AutoLoad,30,$(SOUNDCORE_LOAD))
+endef
+
+define KernelPackage/sound-core/uml
+  FILES:= \
+	$(LINUX_DIR)/sound/soundcore.ko \
+	$(LINUX_DIR)/arch/um/drivers/hostaudio.ko
+  AUTOLOAD+=$(call AutoLoad,30,soundcore hostaudio)
+endef
+
+define KernelPackage/sound-core/description
+ Kernel modules for sound support
+endef
+
+$(eval $(call KernelPackage,sound-core))
+
+
+define AddDepends/sound
+  SUBMENU:=$(SOUND_MENU)
+  DEPENDS+=kmod-sound-core $(1) @!TARGET_uml
+endef
+
+
+define KernelPackage/ac97
+  TITLE:=ac97 controller
+  KCONFIG:=CONFIG_SND_AC97_CODEC
+  FILES:= \
+	$(LINUX_DIR)/sound/ac97_bus.ko \
+	$(LINUX_DIR)/sound/pci/ac97/snd-ac97-codec.ko
+  AUTOLOAD:=$(call AutoLoad,35,ac97_bus snd-ac97-codec)
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/ac97/description
+ The ac97 controller
+endef
+
+$(eval $(call KernelPackage,ac97))
+
+
+define KernelPackage/sound-mpu401
+  TITLE:=MPU-401 uart driver
+  KCONFIG:=CONFIG_SND_MPU401_UART
+  FILES:= \
+	$(LINUX_DIR)/sound/drivers/mpu401/snd-mpu401-uart.ko
+  AUTOLOAD:=$(call AutoLoad,35,snd-mpu401-uart)
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-mpu401/description
+ support for MIDI ports compatible with the Roland MPU-401
+ interface in UART mode.
+endef
+
+$(eval $(call KernelPackage,sound-mpu401))
+
+
+define KernelPackage/sound-seq
+  TITLE:=Sequencer support
+  FILES:= \
+	$(LINUX_DIR)/sound/core/seq/snd-seq.ko \
+	$(LINUX_DIR)/sound/core/seq/snd-seq-midi-event.ko \
+	$(LINUX_DIR)/sound/core/seq/snd-seq-midi.ko
+  AUTOLOAD:=$(call AutoLoad,35,snd-seq snd-seq-midi-event snd-seq-midi)
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-seq/description
+ Kernel modules for sequencer support
+endef
+
+$(eval $(call KernelPackage,sound-seq))
+
+
+define KernelPackage/sound-ens1371
+  TITLE:=(Creative) Ensoniq AudioPCI 1371
+  KCONFIG:=CONFIG_SND_ENS1371
+  DEPENDS:=@PCI_SUPPORT +kmod-ac97
+  FILES:=$(LINUX_DIR)/sound/pci/snd-ens1371.ko
+  AUTOLOAD:=$(call AutoLoad,36,snd-ens1371)
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-ens1371/description
+ support for (Creative) Ensoniq AudioPCI 1371 chips
+endef
+
+$(eval $(call KernelPackage,sound-ens1371))
+
+
+define KernelPackage/sound-i8x0
+  TITLE:=Intel/SiS/nVidia/AMD/ALi AC97 Controller
+  DEPENDS:=+kmod-ac97
+  KCONFIG:=CONFIG_SND_INTEL8X0
+  FILES:=$(LINUX_DIR)/sound/pci/snd-intel8x0.ko
+  AUTOLOAD:=$(call AutoLoad,36,snd-intel8x0)
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-i8x0/description
+ support for the integrated AC97 sound device on motherboards
+ with Intel/SiS/nVidia/AMD chipsets, or ALi chipsets using
+ the M5455 Audio Controller.
+endef
+
+$(eval $(call KernelPackage,sound-i8x0))
+
+
+define KernelPackage/sound-via82xx
+  TITLE:=VIA 82xx AC97 Controller
+  DEPENDS:=+kmod-ac97 +kmod-sound-mpu401
+  KCONFIG:=CONFIG_SND_VIA82XX
+  FILES:=$(LINUX_DIR)/sound/pci/snd-via82xx.ko
+  AUTOLOAD:=$(call AutoLoad,36,snd-via82xx)
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-via82xx/description
+ support for the integrated AC97 sound device on motherboards
+ with VIA chipsets.
+endef
+
+$(eval $(call KernelPackage,sound-via82xx))
+
+
+define KernelPackage/sound-soc-core
+  TITLE:=SoC sound support
+  DEPENDS:=+kmod-regmap-core +kmod-ac97
+  KCONFIG:= \
+	CONFIG_SND_SOC \
+	CONFIG_SND_SOC_ADI=n \
+	CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y \
+	CONFIG_SND_SOC_ALL_CODECS=n
+  FILES:=$(LINUX_DIR)/sound/soc/snd-soc-core.ko
+  AUTOLOAD:=$(call AutoLoad,55,snd-soc-core)
+  $(call AddDepends/sound)
+endef
+
+$(eval $(call KernelPackage,sound-soc-core))
+
+
+define KernelPackage/sound-soc-ac97
+  TITLE:=AC97 Codec support
+  KCONFIG:=CONFIG_SND_SOC_AC97_CODEC
+  FILES:=$(LINUX_DIR)/sound/soc/codecs/snd-soc-ac97.ko
+  AUTOLOAD:=$(call AutoLoad,57,snd-soc-ac97)
+  DEPENDS:=+kmod-ac97 +kmod-sound-soc-core
+  $(call AddDepends/sound)
+endef
+
+$(eval $(call KernelPackage,sound-soc-ac97))
+
+
+define KernelPackage/sound-soc-imx
+  TITLE:=IMX SoC support
+  KCONFIG:=\
+	CONFIG_SND_IMX_SOC \
+	CONFIG_SND_SOC_IMX_AUDMUX \
+	CONFIG_SND_SOC_FSL_SSI \
+	CONFIG_SND_SOC_IMX_PCM_DMA
+  FILES:= \
+	$(LINUX_DIR)/sound/soc/fsl/snd-soc-imx-audmux.ko \
+	$(LINUX_DIR)/sound/soc/fsl/snd-soc-fsl-ssi.ko \
+	$(LINUX_DIR)/sound/soc/fsl/imx-pcm-dma.ko
+  AUTOLOAD:=$(call AutoLoad,56,snd-soc-imx-audmux snd-soc-fsl-ssi snd-soc-imx-pcm)
+  DEPENDS:=@TARGET_imx6 +kmod-sound-soc-core
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-soc-imx/description
+ Support for i.MX6 Platform sound (ssi/audmux/pcm)
+endef
+
+$(eval $(call KernelPackage,sound-soc-imx))
+
+
+define KernelPackage/sound-soc-imx-sgtl5000
+  TITLE:=IMX SoC support for SGTL5000
+  KCONFIG:=CONFIG_SND_SOC_IMX_SGTL5000
+  FILES:=\
+	$(LINUX_DIR)/sound/soc/codecs/snd-soc-sgtl5000.ko \
+	$(LINUX_DIR)/sound/soc/fsl/snd-soc-imx-sgtl5000.ko
+  AUTOLOAD:=$(call AutoLoad,57,snd-soc-sgtl5000 snd-soc-imx-sgtl5000)
+  DEPENDS:=@TARGET_imx6 +kmod-sound-soc-imx
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-soc-imx-sgtl5000/description
+ Support for i.MX6 Platform sound SGTL5000 codec
+endef
+
+$(eval $(call KernelPackage,sound-soc-imx-sgtl5000))
+
+
+define KernelPackage/sound-soc-spdif
+  TITLE:=SoC S/PDIF codec support
+  KCONFIG:=CONFIG_SND_SOC_SPDIF
+  FILES:= \
+	$(LINUX_DIR)/sound/soc/codecs/snd-soc-spdif-tx.ko \
+	$(LINUX_DIR)/sound/soc/codecs/snd-soc-spdif-rx.ko
+  DEPENDS:=+kmod-sound-soc-core
+  AUTOLOAD:=$(call AutoProbe,snd-soc-spdif-tx snd-soc-spdif-rx)
+  $(call AddDepends/sound)
+endef
+
+$(eval $(call KernelPackage,sound-soc-spdif))
+
+
+define KernelPackage/pcspkr
+  DEPENDS:=@TARGET_x86 +kmod-input-core
+  TITLE:=PC speaker support
+  KCONFIG:= \
+	CONFIG_SND_PCSP
+  FILES:= \
+	$(LINUX_DIR)/sound/drivers/pcsp/snd-pcsp.ko
+  AUTOLOAD:=$(call AutoLoad,50,snd-pcsp)
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/pcspkr/description
+ This enables sounds (tones) through the pc speaker
+endef
+
+$(eval $(call KernelPackage,pcspkr))
+
+define KernelPackage/sound-dummy
+  $(call AddDepends/sound)
+  TITLE:=Null sound output driver (sink)
+  KCONFIG:= \
+	CONFIG_SND_DUMMY
+  FILES:= \
+	$(LINUX_DIR)/sound/drivers/snd-dummy.ko
+  AUTOLOAD:=$(call AutoLoad,32,snd-dummy)
+endef
+
+define KernelPackage/sound-dummy/description
+ Dummy sound device for Alsa when no hardware present
+endef
+
+$(eval $(call KernelPackage,sound-dummy))
+
+define KernelPackage/sound-hda-core
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Sound Core Support
+  KCONFIG:= \
+	CONFIG_SND_HDA_CORE \
+	CONFIG_SND_HDA_HWDEP=y \
+	CONFIG_SND_HDA_RECONFIG=n \
+	CONFIG_SND_HDA_INPUT_BEEP=n \
+	CONFIG_SND_HDA_PATCH_LOADER=n \
+	CONFIG_SND_HDA_GENERIC
+  FILES:= \
+	$(LINUX_DIR)/sound/hda/snd-hda-core.ko \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec.ko \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-generic.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-core snd-hda-codec snd-hda-codec-generic)
+  $(call AddDepends/sound,+kmod-regmap-core)
+endef
+
+define KernelPackage/sound-hda-core/description
+ Kernel modules for HD Audio sound support
+endef
+
+$(eval $(call KernelPackage,sound-hda-core))
+
+define KernelPackage/sound-hda-codec-realtek
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:= HD Audio Realtek Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_REALTEK
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-realtek.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-realtek)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-realtek/description
+ Kernel modules for Intel HDA Realtek codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-realtek))
+
+define KernelPackage/sound-hda-codec-cmedia
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio C-Media Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_CMEDIA
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-cmedia.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-cmedia)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-cmedia/description
+ Kernel modules for HD Audio C-Media codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-cmedia))
+
+define KernelPackage/sound-hda-codec-analog
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Analog Devices Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_ANALOG
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-analog.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-analog)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-analog/description
+ Kernel modules for HD Audio Analog Devices codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-analog))
+
+define KernelPackage/sound-hda-codec-idt
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Sigmatel IDT Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_SIGMATEL
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-idt.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-idt)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-idt/description
+ Kernel modules for HD Audio Sigmatel IDT codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-idt))
+
+define KernelPackage/sound-hda-codec-si3054
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Silicon Labs 3054 Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_SI3054
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-si3054.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-si3054)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-si3054/description
+ Kernel modules for HD Audio Silicon Labs 3054 codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-si3054))
+
+define KernelPackage/sound-hda-codec-cirrus
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Cirrus Logic Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_CIRRUS
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-cirrus.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-cirrus)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-cirrus/description
+ Kernel modules for HD Audio Cirrus Logic codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-cirrus))
+
+define KernelPackage/sound-hda-codec-ca0110
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Creative CA0110 Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_CA0110
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-ca0110.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-ca0110)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-ca0110/description
+ Kernel modules for HD Audio Creative CA0110 codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-ca0110))
+
+define KernelPackage/sound-hda-codec-ca0132
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Creative CA0132 Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_CA0132 \
+	CONFIG_SND_HDA_CODEC_CA0132_DSP=n
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-ca0132.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-ca0132)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-ca0132/description
+ Kernel modules for HD Audio Creative CA0132 codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-ca0132))
+
+define KernelPackage/sound-hda-codec-conexant
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Conexant Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_CONEXANT
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-conexant.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-conexant)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-conexant/description
+ Kernel modules for HD Audio Conexant codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-conexant))
+
+define KernelPackage/sound-hda-codec-via
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Via Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_VIA
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-via.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-via)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-via/description
+ Kernel modules for HD Audio VIA codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-via))
+
+define KernelPackage/sound-hda-codec-hdmi
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio HDMI/DisplayPort Codec
+  KCONFIG:= \
+	CONFIG_SND_HDA_CODEC_HDMI
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-codec-hdmi.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-codec-hdmi)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-codec-hdmi/description
+ Kernel modules for HD Audio HDMI codec support
+endef
+
+$(eval $(call KernelPackage,sound-hda-codec-hdmi))
+
+define KernelPackage/sound-hda-intel
+  SUBMENU:=$(SOUND_MENU)
+  TITLE:=HD Audio Intel Driver
+  DEPENDS:=@TARGET_x86
+  KCONFIG:= \
+	CONFIG_SOUND_PCI \
+	CONFIG_SND_HDA_INTEL
+  FILES:= \
+	$(LINUX_DIR)/sound/pci/hda/snd-hda-intel.ko \
+	$(LINUX_DIR)/sound/hda/snd-intel-nhlt.ko
+  AUTOLOAD:=$(call AutoProbe,snd-hda-intel)
+  $(call AddDepends/sound,kmod-sound-hda-core)
+endef
+
+define KernelPackage/sound-hda-intel/description
+ Kernel modules for HD Audio Intel driver support
+endef
+
+$(eval $(call KernelPackage,sound-hda-intel))

feeds/ipq807x/linux/modules/spi.mk

@@ -0,0 +1,75 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+SPI_MENU:=SPI Support
+
+define KernelPackage/mmc-spi
+  SUBMENU:=$(SPI_MENU)
+  TITLE:=MMC/SD over SPI Support
+  DEPENDS:=+kmod-mmc +kmod-lib-crc-itu-t +kmod-lib-crc7
+  KCONFIG:=CONFIG_MMC_SPI \
+          CONFIG_SPI=y \
+          CONFIG_SPI_MASTER=y
+  FILES:=\
+	$(if $(CONFIG_OF),$(LINUX_DIR)/drivers/mmc/host/of_mmc_spi.ko) \
+	$(LINUX_DIR)/drivers/mmc/host/mmc_spi.ko
+  AUTOLOAD:=$(call AutoProbe,$(if $(CONFIG_OF),of_mmc_spi) mmc_spi)
+endef
+
+define KernelPackage/mmc-spi/description
+ Kernel support for MMC/SD over SPI
+endef
+
+$(eval $(call KernelPackage,mmc-spi))
+
+
+define KernelPackage/spi-bitbang
+  SUBMENU:=$(SPI_MENU)
+  TITLE:=Serial Peripheral Interface bitbanging library
+  KCONFIG:=CONFIG_SPI_BITBANG \
+          CONFIG_SPI=y \
+          CONFIG_SPI_MASTER=y
+  FILES:=$(LINUX_DIR)/drivers/spi/spi-bitbang.ko
+endef
+
+define KernelPackage/spi-bitbang/description
+ This package contains the SPI bitbanging library
+endef
+
+$(eval $(call KernelPackage,spi-bitbang))
+
+
+define KernelPackage/spi-gpio
+  SUBMENU:=$(SPI_MENU)
+  TITLE:=GPIO-based bitbanging SPI Master
+  DEPENDS:=@GPIO_SUPPORT +kmod-spi-bitbang
+  KCONFIG:=CONFIG_SPI_GPIO
+  FILES:=$(LINUX_DIR)/drivers/spi/spi-gpio.ko
+  AUTOLOAD:=$(call AutoProbe,spi-gpio)
+endef
+
+define KernelPackage/spi-gpio/description
+ This package contains the GPIO-based bitbanging SPI Master
+endef
+
+$(eval $(call KernelPackage,spi-gpio))
+
+define KernelPackage/spi-dev
+  SUBMENU:=$(SPI_MENU)
+  TITLE:=User mode SPI device driver
+  KCONFIG:=CONFIG_SPI_SPIDEV \
+          CONFIG_SPI=y \
+          CONFIG_SPI_MASTER=y
+  FILES:=$(LINUX_DIR)/drivers/spi/spidev.ko
+  AUTOLOAD:=$(call AutoProbe,spidev)
+endef
+
+define KernelPackage/spi-dev/description
+ This package contains the user mode SPI device driver
+endef
+
+$(eval $(call KernelPackage,spi-dev))

feeds/ipq807x/linux/modules/virt.mk

@@ -0,0 +1,73 @@
+#
+# Copyright (C) 2016 Yousong Zhou <yszhou4tech@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+define KernelPackage/irqbypass
+  SUBMENU:=Virtualization
+  TITLE:=IRQ offload/bypass manager
+  KCONFIG:=CONFIG_IRQ_BYPASS_MANAGER
+  HIDDEN:=1
+  FILES:= $(LINUX_DIR)/virt/lib/irqbypass.ko
+  AUTOLOAD:=$(call AutoProbe,irqbypass.ko)
+endef
+$(eval $(call KernelPackage,irqbypass))
+
+
+define KernelPackage/kvm-x86
+  SUBMENU:=Virtualization
+  TITLE:=Kernel-based Virtual Machine (KVM) support
+  DEPENDS:=@TARGET_x86_generic||TARGET_x86_64 +kmod-irqbypass
+  KCONFIG:=\
+	  CONFIG_VIRTUALIZATION=y \
+	  CONFIG_KVM
+  FILES:= $(LINUX_DIR)/arch/$(LINUX_KARCH)/kvm/kvm.ko
+  AUTOLOAD:=$(call AutoProbe,kvm.ko)
+endef
+
+define KernelPackage/kvm-x86/description
+  Support hosting fully virtualized guest machines using hardware
+  virtualization extensions.  You will need a fairly recent
+  processor equipped with virtualization extensions. You will also
+  need to select one or more of the processor modules.
+
+  This module provides access to the hardware capabilities through
+  a character device node named /dev/kvm.
+endef
+
+$(eval $(call KernelPackage,kvm-x86))
+
+
+define KernelPackage/kvm-intel
+  SUBMENU:=Virtualization
+  TITLE:=KVM for Intel processors support
+  DEPENDS:=+kmod-kvm-x86
+  KCONFIG:=CONFIG_KVM_INTEL
+  FILES:= $(LINUX_DIR)/arch/$(LINUX_KARCH)/kvm/kvm-intel.ko
+  AUTOLOAD:=$(call AutoProbe,kvm-intel.ko)
+endef
+
+define KernelPackage/kvm-intel/description
+  Provides support for KVM on Intel processors equipped with the VT
+  extensions.
+endef
+
+$(eval $(call KernelPackage,kvm-intel))
+
+
+define KernelPackage/kvm-amd
+  SUBMENU:=Virtualization
+  TITLE:=KVM for AMD processors support
+  DEPENDS:=+kmod-kvm-x86
+  KCONFIG:=CONFIG_KVM_AMD
+  FILES:= $(LINUX_DIR)/arch/$(LINUX_KARCH)/kvm/kvm-amd.ko
+  AUTOLOAD:=$(call AutoProbe,kvm-amd.ko)
+endef
+
+define KernelPackage/kvm-amd/description
+  Provides support for KVM on AMD processors equipped with the AMD-V
+  (SVM) extensions.
+endef
+
+$(eval $(call KernelPackage,kvm-amd))

feeds/ipq807x/linux/modules/w1.mk

@@ -0,0 +1,193 @@
+#
+# Copyright (C) 2008-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+W1_MENU:=W1 support
+W1_MASTERS_DIR:=$(LINUX_DIR)/drivers/w1/masters
+W1_SLAVES_DIR:=$(LINUX_DIR)/drivers/w1/slaves
+
+define KernelPackage/w1
+  SUBMENU:=$(W1_MENU)
+  TITLE:=Dallas's 1-wire support
+  KCONFIG:=CONFIG_W1
+  FILES:=$(LINUX_DIR)/drivers/w1/wire.ko
+  DEPENDS:=+kmod-hwmon-core
+endef
+
+define KernelPackage/w1/description
+ Kernel module for Dallas's 1-wire support
+endef
+
+$(eval $(call KernelPackage,w1))
+
+
+define AddDepends/w1
+  SUBMENU:=$(W1_MENU)
+  DEPENDS+=kmod-w1 $(1)
+endef
+
+
+#
+# 1-wire masters
+#
+define KernelPackage/w1-master-gpio
+  TITLE:=GPIO 1-wire bus master driver
+  DEPENDS:=@GPIO_SUPPORT
+  KCONFIG:=CONFIG_W1_MASTER_GPIO
+  FILES:=$(W1_MASTERS_DIR)/w1-gpio.ko
+  AUTOLOAD:=$(call AutoProbe,w1-gpio)
+  $(call AddDepends/w1)
+endef
+
+define KernelPackage/w1-master-gpio/description
+ Kernel module for the GPIO 1-wire bus master driver
+endef
+
+$(eval $(call KernelPackage,w1-master-gpio))
+
+define KernelPackage/w1-master-ds2482
+  TITLE:=DS2482 1-wire i2c bus master driver
+  KCONFIG:=CONFIG_W1_MASTER_DS2482
+  FILES:=$(W1_MASTERS_DIR)/ds2482.ko
+  AUTOLOAD:=$(call AutoProbe,ds2482)
+  $(call AddDepends/w1,+kmod-i2c-core)
+endef
+
+define KernelPackage/w1-master-ds2482/description
+ Kernel module for the DS2482 i2c 1-wire bus master driver
+ NOTE: Init with: echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
+ or use owfs
+endef
+
+$(eval $(call KernelPackage,w1-master-ds2482))
+
+
+define KernelPackage/w1-master-ds2490
+  TITLE:=DS2490 1-wire usb bus master driver
+  DEPENDS:=@USB_SUPPORT +kmod-usb-core
+  KCONFIG:=CONFIG_W1_MASTER_DS2490
+  FILES:=$(W1_MASTERS_DIR)/ds2490.ko
+  AUTOLOAD:=$(call AutoProbe,ds2490)
+  $(call AddDepends/w1)
+endef
+
+define KernelPackage/w1-master-ds2490/description
+ Kernel module for the DS2490 usb 1-wire bus master driver
+endef
+
+$(eval $(call KernelPackage,w1-master-ds2490))
+
+
+define KernelPackage/w1-master-mxc
+  TITLE:=Freescale MXC 1-wire busmaster
+  DEPENDS:=@TARGET_imx6
+  KCONFIG:=CONFIG_W1_MASTER_MXC
+  FILES:=$(W1_MASTERS_DIR)/mxc_w1.ko
+  AUTOLOAD:=$(call AutoProbe,mxc_w1)
+  $(call AddDepends/w1)
+endef
+
+define KernelPackage/w1-master-mxc/description
+ Kernel module for 1-wire Freescale MXC 1-wire busmaster
+endef
+
+$(eval $(call KernelPackage,w1-master-mxc))
+
+
+#
+# 1-wire slaves
+#
+define KernelPackage/w1-slave-therm
+  TITLE:=Thermal family implementation
+  KCONFIG:=CONFIG_W1_SLAVE_THERM
+  FILES:=$(W1_SLAVES_DIR)/w1_therm.ko
+  AUTOLOAD:=$(call AutoProbe,w1_therm)
+  $(call AddDepends/w1)
+endef
+
+define KernelPackage/w1-slave-therm/description
+ Kernel module for 1-wire thermal sensors
+endef
+
+$(eval $(call KernelPackage,w1-slave-therm))
+
+
+define KernelPackage/w1-slave-smem
+  TITLE:=Simple 64bit memory family implementation
+  KCONFIG:=CONFIG_W1_SLAVE_SMEM
+  FILES:=$(W1_SLAVES_DIR)/w1_smem.ko
+  AUTOLOAD:=$(call AutoProbe,w1_smem)
+  $(call AddDepends/w1)
+endef
+
+define KernelPackage/w1-slave-smem/description
+ Kernel module for 1-wire simple 64bit memory rom(ds2401/ds2411/ds1990*)
+endef
+
+$(eval $(call KernelPackage,w1-slave-smem))
+
+define KernelPackage/w1-slave-ds2431
+  TITLE:=DS2431 1kb EEPROM driver
+  KCONFIG:= CONFIG_W1_SLAVE_DS2431
+  FILES:=$(W1_SLAVES_DIR)/w1_ds2431.ko
+  AUTOLOAD:=$(call AutoProbe,w1_ds2431)
+  $(call AddDepends/w1)
+endef
+
+define KernelPackage/w1-slave-ds2431/description
+ Kernel module for 1-wire 1kb EEPROM (DS2431)
+endef
+
+$(eval $(call KernelPackage,w1-slave-ds2431))
+
+define KernelPackage/w1-slave-ds2433
+  TITLE:=DS2433 4kb EEPROM driver
+  KCONFIG:= \
+	CONFIG_W1_SLAVE_DS2433 \
+	CONFIG_W1_SLAVE_DS2433_CRC=n
+  FILES:=$(W1_SLAVES_DIR)/w1_ds2433.ko
+  AUTOLOAD:=$(call AutoProbe,w1_ds2433)
+  $(call AddDepends/w1)
+endef
+
+define KernelPackage/w1-slave-ds2433/description
+ Kernel module for 1-wire 4kb EEPROM (DS2433)
+endef
+
+$(eval $(call KernelPackage,w1-slave-ds2433))
+
+
+define KernelPackage/w1-slave-ds2760
+  TITLE:=Dallas 2760 battery monitor chip (HP iPAQ & others)
+  KCONFIG:= \
+	CONFIG_W1_SLAVE_DS2760 \
+	CONFIG_W1_SLAVE_DS2433_CRC=n
+  FILES:=$(W1_SLAVES_DIR)/w1_ds2760.ko
+  AUTOLOAD:=$(call AutoProbe,w1_ds2760)
+  $(call AddDepends/w1)
+endef
+
+define KernelPackage/w1-slave-ds2760/description
+ Kernel module for 1-wire DS2760 battery monitor chip support
+endef
+
+$(eval $(call KernelPackage,w1-slave-ds2760))
+
+
+define KernelPackage/w1-slave-ds2413
+  TITLE:=DS2413 2 Ch. Addressable Switch
+  KCONFIG:= \
+	CONFIG_W1_SLAVE_DS2413
+  FILES:=$(W1_SLAVES_DIR)/w1_ds2413.ko
+  AUTOLOAD:=$(call AutoProbe,w1_ds2413)
+  $(call AddDepends/w1)
+endef
+
+define KernelPackage/w1-slave-ds2413/description
+ Kernel module for 1-wire DS2413 Dual Channel Addressable Switch support
+endef
+
+$(eval $(call KernelPackage,w1-slave-ds2413))

feeds/ipq807x/linux/modules/wireless.mk

@@ -0,0 +1,42 @@
+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+WIRELESS_MENU:=Wireless Drivers
+
+define KernelPackage/net-prism54
+  SUBMENU:=$(WIRELESS_MENU)
+  TITLE:=Intersil Prism54 support
+  DEPENDS:=@PCI_SUPPORT +@DRIVER_WEXT_SUPPORT +prism54-firmware
+  KCONFIG:=CONFIG_PRISM54
+  FILES:= \
+	$(LINUX_DIR)/drivers/net/wireless/intersil/prism54/prism54.ko
+  AUTOLOAD:=$(call AutoProbe,prism54)
+endef
+
+define KernelPackage/net-prism54/description
+ Kernel modules for Intersil Prism54 support
+endef
+
+$(eval $(call KernelPackage,net-prism54))
+
+
+define KernelPackage/net-rtl8192su
+  SUBMENU:=$(WIRELESS_MENU)
+  TITLE:=RTL8192SU support (staging)
+  DEPENDS:=@USB_SUPPORT +@DRIVER_WEXT_SUPPORT +kmod-usb-core +rtl8192su-firmware
+  KCONFIG:=\
+	CONFIG_STAGING=y \
+	CONFIG_R8712U
+  FILES:=$(LINUX_DIR)/drivers/staging/rtl8712/r8712u.ko
+  AUTOLOAD:=$(call AutoProbe,r8712u)
+endef
+
+define KernelPackage/net-rtl8192su/description
+ Kernel modules for RealTek RTL8712 and RTL81XXSU fullmac support.
+endef
+
+$(eval $(call KernelPackage,net-rtl8192su))

feeds/ipq807x/linux/modules/wpan.mk

@@ -0,0 +1,152 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+
+WPAN_MENU:=WPAN 802.15.4 Support
+
+define KernelPackage/ieee802154
+  SUBMENU:=$(WPAN_MENU)
+  TITLE:=IEEE-802.15.4 support
+  KCONFIG:= \
+	CONFIG_IEEE802154 \
+	CONFIG_IEEE802154_SOCKET=y \
+	CONFIG_IEEE802154_NL802154_EXPERIMENTAL=n
+  FILES:= \
+	$(LINUX_DIR)/net/ieee802154/ieee802154.ko \
+	$(LINUX_DIR)/net/ieee802154/ieee802154_socket.ko
+  AUTOLOAD:=$(call AutoLoad,90,ieee802154 ieee802154_socket)
+endef
+
+define KernelPackage/ieee802154/description
+  IEEE Std 802.15.4 defines a low data rate, low power and low
+  complexity short range wireless personal area networks. It was
+  designed to organise networks of sensors, switches, etc automation
+  devices. Maximum allowed data rate is 250 kb/s and typical personal
+  operating space around 10m.
+endef
+
+$(eval $(call KernelPackage,ieee802154))
+
+define KernelPackage/mac802154
+  SUBMENU:=$(WPAN_MENU)
+  TITLE:=MAC-802.15.4 support
+  DEPENDS:=+kmod-ieee802154 +kmod-crypto-aead +kmod-lib-crc-ccitt
+  KCONFIG:= \
+	CONFIG_MAC802154 \
+	CONFIG_IEEE802154_DRIVERS=y
+  FILES:=$(LINUX_DIR)/net/mac802154/mac802154.ko
+  AUTOLOAD:=$(call AutoLoad,91,mac802154)
+endef
+
+define KernelPackage/mac802154/description
+  This option enables the hardware independent IEEE 802.15.4
+  networking stack for SoftMAC devices (the ones implementing
+  only PHY level of IEEE 802.15.4 standard).
+
+  Note: this implementation is neither certified, nor feature
+  complete! Compatibility with other implementations hasn't
+  been tested yet!
+endef
+
+$(eval $(call KernelPackage,mac802154))
+
+define KernelPackage/fakelb
+  SUBMENU:=$(WPAN_MENU)
+  TITLE:=Fake LR-WPAN driver
+  DEPENDS:=+kmod-mac802154
+  KCONFIG:=CONFIG_IEEE802154_FAKELB
+  FILES:=$(LINUX_DIR)/drivers/net/ieee802154/fakelb.ko
+  AUTOLOAD:=$(call AutoLoad,92,fakelb)
+endef
+
+define KernelPackage/fakelb/description
+  Say Y here to enable the fake driver that can emulate a net
+  of several interconnected radio devices.
+endef
+
+$(eval $(call KernelPackage,fakelb))
+
+define KernelPackage/atusb
+  SUBMENU:=$(WPAN_MENU)
+  TITLE:=ATUSB transceiver driver
+  DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-mac802154
+  KCONFIG:=CONFIG_IEEE802154_ATUSB
+  FILES:=$(LINUX_DIR)/drivers/net/ieee802154/atusb.ko
+  AUTOLOAD:=$(call AutoProbe,atusb)
+endef
+
+$(eval $(call KernelPackage,atusb))
+
+define KernelPackage/at86rf230
+  SUBMENU:=$(WPAN_MENU)
+  TITLE:=AT86RF230 transceiver driver
+  DEPENDS:=+kmod-mac802154 +kmod-regmap-spi
+  KCONFIG:=CONFIG_IEEE802154_AT86RF230 \
+	CONFIG_IEEE802154_AT86RF230_DEBUGFS=n \
+	CONFIG_SPI=y \
+	CONFIG_SPI_MASTER=y
+  FILES:=$(LINUX_DIR)/drivers/net/ieee802154/at86rf230.ko
+  AUTOLOAD:=$(call AutoProbe,at86rf230)
+endef
+
+$(eval $(call KernelPackage,at86rf230))
+
+define KernelPackage/mrf24j40
+  SUBMENU:=$(WPAN_MENU)
+  TITLE:=MRF24J40 transceiver driver
+  DEPENDS:=+kmod-mac802154 +kmod-regmap-spi
+  KCONFIG:=CONFIG_IEEE802154_MRF24J40 \
+	CONFIG_SPI=y \
+	CONFIG_SPI_MASTER=y
+  FILES:=$(LINUX_DIR)/drivers/net/ieee802154/mrf24j40.ko
+  AUTOLOAD:=$(call AutoProbe,mrf24j40)
+endef
+
+$(eval $(call KernelPackage,mrf24j40))
+
+define KernelPackage/cc2520
+  SUBMENU:=$(WPAN_MENU)
+  TITLE:=CC2520 transceiver driver
+  DEPENDS:=+kmod-mac802154
+  KCONFIG:=CONFIG_IEEE802154_CC2520 \
+	CONFIG_SPI=y \
+	CONFIG_SPI_MASTER=y
+  FILES:=$(LINUX_DIR)/drivers/net/ieee802154/cc2520.ko
+  AUTOLOAD:=$(call AutoProbe,cc2520)
+endef
+
+$(eval $(call KernelPackage,cc2520))
+
+
+define KernelPackage/ca8210
+  SUBMENU:=$(WPAN_MENU)
+  TITLE:=CA8210 transceiver driver
+  DEPENDS:=+kmod-mac802154
+  KCONFIG:=CONFIG_IEEE802154_CA8210 \
+	CONFIG_SPI=y \
+	CONFIG_SPI_MASTER=y \
+	CONFIG_IEEE802154_CA8210_DEBUGFS=n
+  FILES:=$(LINUX_DIR)/drivers/net/ieee802154/ca8210.ko
+  AUTOLOAD:=$(call AutoProbe,ca8210)
+endef
+
+$(eval $(call KernelPackage,ca8210))
+
+
+define KernelPackage/ieee802154-6lowpan
+  SUBMENU:=$(WPAN_MENU)
+  TITLE:= 6LoWPAN support over IEEE-802.15.4
+  DEPENDS:=+kmod-6lowpan +kmod-ieee802154
+  KCONFIG:=CONFIG_IEEE802154_6LOWPAN
+  FILES:= \
+	$(LINUX_DIR)/net/ieee802154/6lowpan/ieee802154_6lowpan.ko
+  AUTOLOAD:=$(call AutoLoad,91,ieee802154_6lowpan)
+endef
+
+define KernelPackage/ieee802154-6lowpan/description
+ IPv6 compression over IEEE 802.15.4
+endef
+
+$(eval $(call KernelPackage,ieee802154-6lowpan))