diff --git a/feeds/ipq807x_v5.4/ath11k-wifi/Makefile b/feeds/ipq807x_v5.4/ath11k-wifi/Makefile old mode 100644 new mode 100755 index 42db32320..840139021 --- a/feeds/ipq807x_v5.4/ath11k-wifi/Makefile +++ b/feeds/ipq807x_v5.4/ath11k-wifi/Makefile @@ -32,8 +32,7 @@ ALLWIFIBOARDS:= \ cybertan-eww622-a1 \ cybertan-eww631-a1 \ cybertan-eww631-b1 \ - sonicfi-rap630c-311g \ - sonicfi-rap630w-311g \ + cybertan-rap630w-312g \ edgecore-eap101 \ gl-ax1800 \ gl-axt1800 \ @@ -51,6 +50,8 @@ ALLWIFIBOARDS:= \ wallys-dr5018 \ wallys-dr6018 \ wallys-dr6018-v4 \ + sonicfi-rap630c-311g \ + sonicfi-rap630w-311g \ tplink-ex227 \ tplink-ex447 \ yuncore-ax840 \ @@ -393,8 +394,7 @@ $(eval $(call generate-ath11k-wifi-package,cig-wf194c4,Cigtech WF194c4)) $(eval $(call generate-ath11k-wifi-package,cybertan-eww622-a1,CyberTan EWW622 A1)) $(eval $(call generate-ath11k-wifi-package,cybertan-eww631-a1,CyberTan EWW631 A1)) $(eval $(call generate-ath11k-wifi-package,cybertan-eww631-b1,CyberTan EWW631 B1)) -$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G)) -$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G)) +$(eval $(call generate-ath11k-wifi-package,cybertan-rap630w-312g,CyberTan RAP630W 312G)) $(eval $(call generate-ath11k-wifi-package,sercomm-wallaby,Sercomm Kiwi)) $(eval $(call generate-ath11k-wifi-package,wallys-dr6018,Wallys DR6018)) $(eval $(call generate-ath11k-wifi-package,wallys-dr6018-v4,Wallys DR6018 V4)) @@ -406,6 +406,8 @@ $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324)) $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1)) $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1)) $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1)) +$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G)) +$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G)) $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227)) $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447)) $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840)) diff --git a/feeds/ipq807x_v5.4/ath11k-wifi/board-cybertan-rap630w-312g.bin.IPQ5018 b/feeds/ipq807x_v5.4/ath11k-wifi/board-cybertan-rap630w-312g.bin.IPQ5018 new file mode 100755 index 000000000..0f883f318 Binary files /dev/null and b/feeds/ipq807x_v5.4/ath11k-wifi/board-cybertan-rap630w-312g.bin.IPQ5018 differ diff --git a/feeds/ipq807x_v5.4/ath11k-wifi/board-cybertan-rap630w-312g.bin.QCN6122 b/feeds/ipq807x_v5.4/ath11k-wifi/board-cybertan-rap630w-312g.bin.QCN6122 new file mode 100755 index 000000000..1ce7599aa Binary files /dev/null and b/feeds/ipq807x_v5.4/ath11k-wifi/board-cybertan-rap630w-312g.bin.QCN6122 differ diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds index 8c8ec1846..0b53c4358 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds @@ -24,6 +24,11 @@ cybertan,eww631-a1|\ cybertan,eww631-b1) ucidef_set_led_default "power" "POWER" "sys:blue" "on" ;; +cybertan,rap630w-312g) + ucidef_set_led_default "power" "POWER" "red:power" "on" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt" + ;; sonicfi,rap630c-311g|\ sonicfi,rap630w-311g) ucidef_set_led_default "power" "POWER" "pwm:blue" "on" diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network index 6f0accb86..bed9bc8bb 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network @@ -27,6 +27,10 @@ qcom_setup_interfaces() cybertan,eww631-b1) ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6@eth0" ;; + cybertan,rap630w-312g) + ucidef_add_switch "switch1" \ + "6@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" + ;; udaya,a6-id2) ucidef_set_interface_wan "eth1" ucidef_set_interface_lan "eth0" diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata index 22b1a2ce7..49c17f14a 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata @@ -123,6 +123,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin) sonicfi,rap630w-311g|\ cybertan,eww631-a1|\ cybertan,eww631-b1|\ + cybertan,rap630w-312g|\ edgecore,eap104|\ edgecore,oap101|\ edgecore,oap101-6e|\ @@ -151,6 +152,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin) sonicfi,rap630w-311g|\ cybertan,eww631-a1|\ cybertan,eww631-b1|\ + cybertan,rap630w-312g|\ edgecore,oap101|\ edgecore,oap101-6e|\ edgecore,oap101e|\ @@ -217,6 +219,7 @@ ath11k-macs) optimcloud,d60-5g|\ optimcloud,d50|\ optimcloud,d50-5g|\ + cybertan,rap630w-312g|\ yuncore,fap655) ath11k_generate_macs ;; diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh b/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh index 788cc2e9a..461772f31 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh @@ -74,6 +74,7 @@ platform_check_image() { sonicfi,rap630w-311g|\ cybertan,eww631-a1|\ cybertan,eww631-b1|\ + cybertan,rap630w-312g|\ edgecore,eap104|\ wallys,dr5018|\ hfcl,ion4x_w|\ @@ -145,16 +146,17 @@ platform_do_upgrade() { sonicfi,rap630c-311g|\ sonicfi,rap630w-311g|\ cybertan,eww631-a1|\ - cybertan,eww631-b1) + cybertan,eww631-b1|\ + cybertan,rap630w-312g) boot_part=$(fw_printenv bootfrom | cut -d = -f2) - echo "Current bootfrom is $boot_part" - if [[ $boot_part == 1 ]]; then - CI_UBIPART="rootfs" - CI_FWSETENV="bootfrom 0" - else - CI_UBIPART="rootfs_1" - CI_FWSETENV="bootfrom 1" - fi + echo "Current bootfrom is $boot_part" + if [[ $boot_part == 1 ]]; then + CI_UBIPART="rootfs" + CI_FWSETENV="bootfrom 0" + elif [[ $boot_part == 0 ]]; then + CI_UBIPART="rootfs_1" + CI_FWSETENV="bootfrom 1" + fi nand_upgrade_tar "$1" ;; esac diff --git a/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-312g.dts b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-312g.dts new file mode 100755 index 000000000..17f168a49 --- /dev/null +++ b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-312g.dts @@ -0,0 +1,925 @@ +/dts-v1/; +/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved. + * + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ipq5018.dtsi" +#include + +/ { + #address-cells = <0x2>; + #size-cells = <0x2>; + model = "Cybertan RAP630W-312G"; + compatible = "cybertan,rap630w-312g", "qcom,ipq5018-mp03.3", "qcom,ipq5018"; + interrupt-parent = <&intc>; + + aliases { + sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + ethernet0 = "/soc/dp1"; + ethernet1 = "/soc/dp2"; + + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyMSM0,115200,n8 rw init=/init"; + bootargs-append = " swiotlb=1 coherent_pool=2M"; + stdout-path = "serial0"; + }; + + reserved-memory { + #ifdef __IPQ_MEM_PROFILE_256_MB__ + /* 256 MB Profile + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 8MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x40800000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 13MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D100000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D300000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E000000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E100000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4E200000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4EF00000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4F000000 | 1MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x4100000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x1400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xD00000>; + }; + + m3_dump: m3_dump@4D100000 { + no-map; + reg = <0x0 0x4D100000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 { + no-map; + reg = <0x0 0x4E000000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 { + no-map; + reg = <0x0 0x4E100000 0x0 0x100000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E200000 { + no-map; + reg = <0x0 0x4E200000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 { + no-map; + reg = <0x0 0x4EF00000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 { + no-map; + reg = <0x0 0x4F000000 0x0 0x100000>; + }; + #else + /* 512MB/1GB Profiles + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 16MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x41000000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 13MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D100000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | Caldb | 0x4D300000 | 2MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D500000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E300000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | Caldb | 0x4E400000 | 5MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4E900000 | 13MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4F600000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4F700000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | Caldb | 0x4F800000 | 5MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x4D00000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 01400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xD00000>; + }; + + m3_dump: m3_dump@4D100000 { + no-map; + reg = <0x0 0x4D100000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_caldb_region: q6_caldb_region@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0x200000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D500000 { + no-map; + reg = <0x0 0x4D500000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 { + no-map; + reg = <0x0 0x4E200000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 { + no-map; + reg = <0x0 0x4E300000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 { + no-map; + reg = <0x0 0x4E400000 0x0 0x500000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E900000 { + no-map; + reg = <0x0 0x4E900000 0x0 0xD00000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 { + no-map; + reg = <0x0 0x4F600000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 { + no-map; + reg = <0x0 0x4F700000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 { + no-map; + reg = <0x0 0x4F800000 0x0 0x500000>; + }; + + #endif + }; + + soc { + serial@78af000 { + status = "ok"; + }; + + blsp1_uart2: serial@78b0000 { + pinctrl-0 = <&blsp1_uart_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + qpic_bam: dma@7984000{ + status = "ok"; + }; + + nand: qpic-nand@79b0000 { + pinctrl-0 = <&qspi_nand_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + spi_0: spi@78b5000 { /* BLSP1 QUP0 */ + pinctrl-0 = <&blsp0_spi_pins>; + pinctrl-names = "default"; + cs-select = <0>; + status = "ok"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + linux,modalias = "m25p80", "n25q128a11"; + spi-max-frequency = <50000000>; + use-default-sizes; + }; + }; + + mdio0: mdio@88000 { + status = "ok"; + + ethernet-phy@0 { + reg = <7>; + }; + }; + + mdio1: mdio@90000 { + status = "ok"; + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + phy-reset-gpio = <&tlmm 16 0>; + ethernet-phy@0 { + reg = <0>; + }; + + ethernet-phy@1 { + reg = <1>; + }; + + ethernet-phy@2 { + reg = <2>; + }; + + ethernet-phy@3 { + reg = <3>; + }; + ethernet-phy@4 { + reg = <4>; + }; + }; + + ess-instance { + num_devices = <0x2>; + ess-switch@0x39c00000 { + compatible = "qcom,ess-switch-ipq50xx"; + device_id = <0>; + switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/ + cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/ + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <7>; + phy_dac = <0x10 0x10>; + mdiobus = <&mdio0>; + }; + port@1 { + mdio-bus = <&mdio0>; + port_id = <2>; + forced-speed = <1000>; + forced-duplex = <1>; + }; + }; + led_source@0 { + source = <0>; + mode = "normal"; + speed = "all"; + blink_en = "enable"; + active = "high"; + }; + }; + ess-switch1@1 { + compatible = "qcom,ess-switch-qca83xx"; + device_id = <1>; + switch_access_mode = "mdio"; + mdio-bus = <&mdio1>; + reset_gpio = <&tlmm 0x10 0>; /* gpio 16 */ + switch_cpu_bmp = <0x40>; /* cpu port bitmap */ + switch_lan_bmp = <0x3e>; /* lan port bitmap */ + switch_wan_bmp = <0x0>; /* wan port bitmap */ + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x00010 0x2613a0 /* PORT6 FORCE MODE*/ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <0>; + }; + port@1 { + port_id = <2>; + phy_address = <1>; + }; + port@2 { + port_id = <3>; + phy_address = <2>; + }; + port@3 { + port_id = <4>; + phy_address = <3>; + }; + port@4 { + port_id = <5>; + phy_address = <4>; + }; + }; + }; + }; + + wifi0: wifi@c000000 { + status = "ok"; + }; + + dp1 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <1>; + reg = <0x39C00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + qcom,link-poll = <1>; + qcom,phy-mdio-addr = <7>; + mdio-bus = <&mdio0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + }; + + dp2 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <2>; + reg = <0x39D00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + mdio-bus = <&mdio1>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + }; + + nss-macsec1 { + compatible = "qcom,nss-macsec"; + phy_addr = <0x1c>; + mdiobus = <&mdio1>; + }; + }; + + qcom,test@0 { + status = "ok"; + }; + + thermal-zones { + status = "ok"; + }; +}; + +&tlmm { + pinctrl-0 = <&blsp0_uart_pins>; + pinctrl-names = "default"; + + blsp0_uart_pins: uart_pins { + blsp0_uart_rx_tx { + pins = "gpio20", "gpio21"; + function = "blsp0_uart0"; + bias-disable; + }; + }; + + blsp1_uart_pins: blsp1_uart_pins { + blsp1_uart_rx_tx { + pins = "gpio23", "gpio25", "gpio24", "gpio26"; + function = "blsp1_uart2"; + bias-disable; + }; + }; + + blsp0_spi_pins: blsp0_spi_pins { + mux { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-disable; + }; + }; + + qspi_nand_pins: qspi_nand_pins { + qspi_clock { + pins = "gpio9"; + function = "qspi_clk"; + drive-strength = <8>; + bias-disable; + }; + + qspi_cs { + pins = "gpio8"; + function = "qspi_cs"; + drive-strength = <8>; + bias-disable; + }; + + qspi_data { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "qspi_data"; + drive-strength = <8>; + bias-disable; + }; + }; + + mdio1_pins: mdio_pinmux { + mux_0 { + pins = "gpio36"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mux_1 { + pins = "gpio37"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + +// phy_led_pins: phy_led_pins { +// gephy_led_pin { +// pins = "gpio50"; +// function = "led0"; +// drive-strength = <8>; +// bias-pull-down; +// }; +// }; + + button_pins: button_pins { + wps_button { + pins = "gpio38"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + leds_pins: leds_pins { + led_sys { + pins = "gpio24"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + + led_5g { + pins = "gpio22"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + + led_2g { + pins = "gpio23"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + led_onekey { + pins = "gpio46"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&soc { + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + button@1 { + label = "restart"; + linux,code = ; + gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led_power: led24 { + label = "red:power"; + gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + default-state = "on"; + }; + + led22 { + label = "green:wifi5"; + gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + default-state = "off"; + }; + + led23 { + label = "green:wifi2"; + gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + default-state = "off"; + }; + led46 { + label = "led_onekey"; + gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; + linux,default-trigger = "led_onekey"; + default-state = "off"; + }; + }; + + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wps { + label = "reset"; + linux,code = ; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; +}; + +&q6v5_wcss { + compatible = "qcom,ipq5018-q6-mpd"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + firmware = "IPQ5018/q6_fw.mdt"; + reg = <0x0cd00000 0x4040>, + <0x1938000 0x8>, + <0x193d204 0x4>; + reg-names = "qdsp6", + "tcsr-msip", + "tcsr-q6"; + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_Q6_BCR>; + + reset-names = "wcss_aon_reset", + "wcss_q6_reset"; + + clocks = <&gcc GCC_Q6_AXIS_CLK>, + <&gcc GCC_WCSS_ECAHB_CLK>, + <&gcc GCC_Q6_AXIM_CLK>, + <&gcc GCC_Q6_AXIM2_CLK>, + <&gcc GCC_Q6_AHB_CLK>, + <&gcc GCC_Q6_AHB_S_CLK>, + <&gcc GCC_WCSS_AXI_S_CLK>; + clock-names = "gcc_q6_axis_clk", + "gcc_wcss_ecahb_clk", + "gcc_q6_axim_clk", + "gcc_q6_axim2_clk", + "gcc_q6_ahb_clk", + "gcc_q6_ahb_s_clk", + "gcc_wcss_axi_s_clk"; + + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_mem_regions>, <&q6_etr_region>; + #else + memory-region = <&q6_mem_regions>, <&q6_etr_region>, + <&q6_caldb_region>; + #endif + + qcom,rproc = <&q6v5_wcss>; + qcom,bootargs_smem = <507>; + boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>, + <0x2 0x4 0x2 0x12 0x0 0x0>; + status = "ok"; + q6_wcss_pd1: remoteproc_pd1@4ab000 { + compatible = "qcom,ipq5018-wcss-ahb-mpd"; + reg = <0x4ab000 0x20>; + reg-names = "rmb"; + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "IPQ5018/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 8 0>, + <&wcss_smp2p_in 9 0>, + <&wcss_smp2p_in 12 0>, + <&wcss_smp2p_in 11 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_BCR>, + <&gcc GCC_CE_BCR>; + reset-names = "wcss_aon_reset", + "wcss_reset", + "ce_reset"; + + clocks = <&gcc GCC_WCSS_AHB_S_CLK>, + <&gcc GCC_WCSS_ACMT_CLK>, + <&gcc GCC_WCSS_AXI_M_CLK>; + clock-names = "gcc_wcss_ahb_s_clk", + "gcc_wcss_acmt_clk", + "gcc_wcss_axi_m_clk"; + + qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>; + + qcom,smem-states = <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>; + #else + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>, <&q6_caldb_region>; + #endif + + }; + + q6_wcss_pd2: remoteproc_pd2 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "qcn6122/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 16 0>, + <&wcss_smp2p_in 17 0>, + <&wcss_smp2p_in 20 0>, + <&wcss_smp2p_in 19 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 16>, + <&wcss_smp2p_out 17>, + <&wcss_smp2p_out 18>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>; + #else + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>; + #endif + + }; + + q6_wcss_pd3: remoteproc_pd3 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + firmware = "IPQ5018/q6_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 24 0>, + <&wcss_smp2p_in 25 0>, + <&wcss_smp2p_in 28 0>, + <&wcss_smp2p_in 27 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 24>, + <&wcss_smp2p_out 25>, + <&wcss_smp2p_out 26>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>; + #else + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>; + #endif + }; +}; + +&wifi0 { + /* IPQ5018 */ + qcom,multipd_arch; + qcom,rproc = <&q6_wcss_pd1>; + qcom,userpd-subsys-name = "q6v5_wcss_userpd1"; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x23>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>; + qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>; + qcom,caldb-size = <0x200000>; + mem-region = <&q6_ipq5018_data>; +#else + memory-region = <&q6_ipq5018_data>; +#endif + status = "ok"; +}; + +&wifi1 { + /* QCN6122 5G */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd2"; + qcom,rproc = <&q6_wcss_pd2>; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x60>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>; + qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>; + qcom,caldb-size = <0x500000>; + mem-region = <&q6_qcn6122_data1>; +#else + memory-region = <&q6_qcn6122_data1>; +#endif + status = "ok"; +}; + +&wifi2 { + /* QCN6122 6G */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd3"; + qcom,rproc = <&q6_wcss_pd3>; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0xb0>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>; + qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>; + qcom,caldb-size = <0x500000>; + mem-region = <&q6_qcn6122_data2>; +#else + memory-region = <&q6_qcn6122_data2>; +#endif + status = "disabled"; +}; + +&usb3 { + status = "ok"; + /* device-power-gpio = <&tlmm 24 1>; */ +}; + +&dwc_0 { + /delete-property/ #phy-cells; + /delete-property/ phys; + /delete-property/ phy-names; +}; + +&hs_m31phy_0 { + status = "ok"; +}; + +&eud { + status = "ok"; +}; + +&pcie_x1 { + perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>; +}; + +&pcie_x2 { + perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>; +}; + +&pcie_x1_rp { + status = "disabled"; + + mhi_0: qcom,mhi@0 { + reg = <0 0 0 0 0 >; + }; +}; + +&pcie_x2_rp { + status = "disabled"; + + mhi_1: qcom,mhi@1 { + reg = <0 0 0 0 0 >; + + }; +}; diff --git a/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk b/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk old mode 100644 new mode 100755 index 40d84a394..c3ce88a47 --- a/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk +++ b/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk @@ -40,6 +40,17 @@ define Device/cybertan_eww631_b1 endef TARGET_DEVICES += cybertan_eww631_b1 +define Device/cybertan_rap630w_312g + DEVICE_TITLE := CyberTan RAP630W-312G + DEVICE_DTS := qcom-ipq5018-rap630w-312g + SUPPORTED_DEVICES := cybertan,rap630w-312g + DEVICE_PACKAGES := ath11k-wifi-cybertan-rap630w-312g ath11k-firmware-ipq50xx-map-spruce \ + -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3 \ + kmod-usb-uas kmod-fs-msdos kmod-fs-ntfs + DEVICE_DTS_CONFIG := config@mp03.3 +endef +TARGET_DEVICES += cybertan_rap630w_312g + define Device/sonicfi_rap630c_311g DEVICE_TITLE := Sonicfi RAP630C-311G DEVICE_DTS := qcom-ipq5018-rap630c-311g diff --git a/feeds/ipq807x_v5.4/ipq50xx/modules.mk b/feeds/ipq807x_v5.4/ipq50xx/modules.mk old mode 100644 new mode 100755 index 05c753aba..3f3d1c7aa --- a/feeds/ipq807x_v5.4/ipq50xx/modules.mk +++ b/feeds/ipq807x_v5.4/ipq50xx/modules.mk @@ -52,6 +52,183 @@ define KernelPackage/tpm-tis-i2c/description endef $(eval $(call KernelPackage,tpm-tis-i2c)) +define KernelPackage/usb-dwc3-internal + TITLE:=DWC3 USB controller driver + DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget + KCONFIG:= \ + CONFIG_USB_DWC3 \ + CONFIG_USB_DWC3_HOST=n \ + CONFIG_USB_DWC3_GADGET=n \ + CONFIG_USB_DWC3_DUAL_ROLE=y \ + CONFIG_EXTCON=y \ + CONFIG_USB_DWC3_DEBUG=n \ + CONFIG_USB_DWC3_VERBOSE=n + FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3.ko + AUTOLOAD:=$(call AutoLoad,84,dwc3) + $(call AddPlatformDepends/usb) +endef + +define KernelPackage/usb-dwc3-internal/description + This driver provides support for the Dual Role SuperSpeed + USB Controller based on the Synopsys DesignWare USB3 IP Core +endef + +$(eval $(call KernelPackage,usb-dwc3-internal)) + +define KernelPackage/usb-dwc3-qcom-internal + TITLE:=DWC3 QTI USB driver + DEPENDS:=@!LINUX_4_14 @(TARGET_ipq40xx||TARGET_ipq806x||TARGET_ipq807x||TARGET_ipq60xx||TARGET_ipq95xx||TARGET_ipq50xx||TARGET_ipq53xx) +kmod-usb-dwc3-internal + KCONFIG:= CONFIG_USB_DWC3_QCOM + FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko + AUTOLOAD:=$(call AutoLoad,83,dwc3-qcom) + $(call AddPlatformDepends/usb) +endef + +define KernelPackage/usb-dwc3-qcom-internal/description + Some QTI SoCs use DesignWare Core IP for USB2/3 functionality. + This driver also handles Qscratch wrapper which is needed for + peripheral mode support. +endef + +$(eval $(call KernelPackage,usb-dwc3-qcom-internal)) + +define KernelPackage/usb-configfs + TITLE:= USB functions + KCONFIG:=CONFIG_USB_CONFIGFS \ + CONFIG_USB_CONFIGFS_SERIAL=n \ + CONFIG_USB_CONFIGFS_ACM=n \ + CONFIG_USB_CONFIGFS_OBEX=n \ + CONFIG_USB_CONFIGFS_NCM=n \ + CONFIG_USB_CONFIGFS_ECM=n \ + CONFIG_USB_CONFIGFS_ECM_SUBSET=n \ + CONFIG_USB_CONFIGFS_RNDIS=n \ + CONFIG_USB_CONFIGFS_EEM=n \ + CONFIG_USB_CONFIGFS_MASS_STORAGE=n \ + CONFIG_USB_CONFIGFS_F_LB_SS=n \ + CONFIG_USB_CONFIGFS_F_FS=n \ + CONFIG_USB_CONFIGFS_F_UAC1=n \ + CONFIG_USB_CONFIGFS_F_UAC2=n \ + CONFIG_USB_CONFIGFS_F_MIDI=n \ + CONFIG_USB_CONFIGFS_F_HID=n \ + CONFIG_USB_CONFIGFS_F_PRINTER=n \ + CONFIG_USB_CONFIGFS_F_QDSS=n + $(call AddPlatformDepends/usb) +endef + +define KernelPackage/usb-configfs/description + USB functions +endef + +$(eval $(call KernelPackage,usb-configfs)) + +define KernelPackage/usb-f-diag + TITLE:=USB DIAG + KCONFIG:=CONFIG_USB_F_DIAG \ + CONFIG_USB_CONFIGFS_F_DIAG=y \ + CONFIG_DIAG_OVER_USB=y + DEPENDS:=+kmod-usb-lib-composite +kmod-usb-configfs + FILES:=$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_diag.ko + AUTOLOAD:=$(call AutoLoad,52,usb_f_diag) + $(call AddPlatformDepends/usb) +endef + +define KernelPackage/usb-f-diag/description + USB DIAG +endef + +$(eval $(call KernelPackage,usb-f-diag)) + +define KernelPackage/usb-uas + TITLE:=USB Attched SCSI support + DEPENDS:= +kmod-scsi-core +kmod-usb-storage + KCONFIG:=CONFIG_USB_UAS + FILES:=$(LINUX_DIR)/drivers/usb/storage/uas.ko + AUTOLOAD:=$(call AutoProbe,uas) + $(call AddPlatformDepends/usb) +endef + +define KernelPackage/usb-uas/description + Kernel support for USB Attached SCSI devices (UAS) +endef + +$(eval $(call KernelPackage,usb-uas)) + + +define KernelPackage/diag-char + TITLE:=CHAR DIAG + KCONFIG:= CONFIG_DIAG_MHI=y@ge5.4 \ + CONFIG_DIAG_OVER_PCIE=n@ge5.4 \ + CONFIG_DIAGFWD_BRIDGE_CODE=y \ + CONFIG_DIAG_CHAR + DEPENDS:=+kmod-lib-crc-ccitt +USB_CONFIGFS_F_DIAG:kmod-usb-f-diag +USB_CONFIGFS_F_DIAG:kmod-usb-core + FILES:=$(LINUX_DIR)/drivers/char/diag/diagchar.ko +ifneq (,$(findstring $(CONFIG_KERNEL_IPQ_MEM_PROFILE), 256)$(CONFIG_LOWMEM_FLASH)) + AUTOLOAD:= +else + AUTOLOAD:=$(call AutoLoad,52,diagchar) +endif +endef + +define KernelPackage/diag-char/description + CHAR DIAG +endef + +$(eval $(call KernelPackage,diag-char)) + +define KernelPackage/usb-f-qdss + TITLE:=USB QDSS + KCONFIG:=CONFIG_USB_F_QDSS \ + CONFIG_USB_CONFIGFS_F_QDSS=y + DEPENDS:=@TARGET_ipq807x||TARGET_ipq60xx||TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_64||TARGET_ipq_ipq60xx||TARGET_ipq_ipq60xx_64||TARGET_ipq_ipq50xx||TARGET_ipq_ipq50xx_64 +kmod-usb-lib-composite +kmod-usb-configfs +kmod-lib-crc-ccitt +kmod-usb-dwc3 +TARGET_ipq_ipq60xx:kmod-usb-dwc3-qcom +TARGET_ipq_ipq60xx_64:kmod-usb-dwc3-qcom +TARGET_ipq_ipq50xx:kmod-usb-dwc3-qcom +TARGET_ipq_ipq50xx_64:kmod-usb-dwc3-qcom +TARGET_ipq_ipq807x:kmod-usb-dwc3-of-simple +TARGET_ipq_ipq807x_64:kmod-usb-dwc3-of-simple +TARGET_ipq60xx:kmod-usb-dwc3-qcom +TARGET_ipq60xx:kmod-usb-dwc3-of-simple +TARGET_ipq807x:kmod-usb-dwc3-qcom +TARGET_ipq807x:kmod-usb-dwc3-of-simple + FILES:=$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_qdss.ko \ + $(LINUX_DIR)/drivers/usb/gadget/function/u_qdss.ko + AUTOLOAD:=$(call AutoLoad,52,usb_f_qdss) + $(call AddPlatformDepends/usb) +endef + +define KernelPackage/usb-f-qdss/description + USB QDSS +endef + +$(eval $(call KernelPackage,usb-f-qdss)) + +define KernelPackage/usb-gdiag + TITLE:=USB GDIAG support + KCONFIG:=CONFIG_USB_G_DIAG + FILES:=\ + $(LINUX_DIR)/drivers/usb/gadget/legacy/g_diag.ko + AUTOLOAD:=$(call AutoLoad,52,g_diag) + DEPENDS:=@TARGET_ipq807x||TARGET_ipq60xx||TARGET_ipq95xx||TARGET_ipq_ipq60xx||TARGET_ipq_ipq60xx_64||TARGET_ipq50xx||TARGET_ipq53xx +kmod-usb-gadget +kmod-usb-lib-composite + $(call AddPlatformDepends/usb) +endef + +define KernelPackage/usb-gdiag/description + Kernel support for USB gdiag mode +endef + +$(eval $(call KernelPackage,usb-gdiag)) + +define KernelPackage/usb-phy-ipq5018 + TITLE:=DWC3 USB PHY driver for IPQ5018 + DEPENDS:=@TARGET_ipq50xx||TARGET_ipq53xx + KCONFIG:= \ + CONFIG_USB_QCA_M31_PHY \ + CONFIG_PHY_IPQ_UNIPHY_USB + FILES:= \ + $(LINUX_DIR)/drivers/usb/phy/phy-qca-m31.ko \ + $(LINUX_DIR)/drivers/phy/phy-qca-uniphy.ko@le4.4 \ + $(LINUX_DIR)/drivers/phy/qualcomm/phy-qca-uniphy.ko@ge5.4 + AUTOLOAD:=$(call AutoLoad,85,phy-qca-m31 phy-qca-uniphy) + $(call AddDepends/usb) +endef + +define KernelPackage/usb-phy-ipq5018/description + This driver provides support for the USB PHY drivers + within the IPQ5018 SoCs. +endef + +$(eval $(call KernelPackage,usb-phy-ipq5018)) + define KernelPackage/bootconfig SUBMENU:=Other modules TITLE:=Bootconfig partition for failsafe diff --git a/patches/0081-ipq50xx-fix-compile-error-with-scsi-core.patch b/patches/0081-ipq50xx-fix-compile-error-with-scsi-core.patch new file mode 100755 index 000000000..378f66f2e --- /dev/null +++ b/patches/0081-ipq50xx-fix-compile-error-with-scsi-core.patch @@ -0,0 +1,28 @@ +From c3b15680de7b17c2c67c9d523463d8689cb811e0 Mon Sep 17 00:00:00 2001 +From: "wingate.chi" +Date: Mon, 2 Dec 2024 03:16:27 +0000 +Subject: [PATCH] ipq50xx: fix compile error of scsi-core\n this is reference + qsdk 12.2 SPF + +--- + package/kernel/linux/modules/block.mk | 1 - + 1 file changed, 1 deletion(-) + mode change 100644 => 100755 package/kernel/linux/modules/block.mk + +diff --git a/package/kernel/linux/modules/block.mk b/package/kernel/linux/modules/block.mk +old mode 100644 +new mode 100755 +index 4ee3f78f38..5e8c69a202 +--- a/package/kernel/linux/modules/block.mk ++++ b/package/kernel/linux/modules/block.mk +@@ -525,7 +525,6 @@ define KernelPackage/scsi-core + CONFIG_BLK_DEV_SD + FILES:= \ + $(LINUX_DIR)/drivers/scsi/scsi_mod.ko \ +- $(LINUX_DIR)/drivers/scsi/scsi_common.ko \ + $(LINUX_DIR)/drivers/scsi/sd_mod.ko + AUTOLOAD:=$(call AutoLoad,40,scsi_mod scsi_common sd_mod,1) + endef +-- +2.17.1 + diff --git a/profiles/cybertan_rap630w-312g.yml b/profiles/cybertan_rap630w-312g.yml new file mode 100755 index 000000000..30c83805e --- /dev/null +++ b/profiles/cybertan_rap630w-312g.yml @@ -0,0 +1,17 @@ +--- +profile: cybertan_rap630w_312g +target: ipq50xx +subtarget: generic +description: Build image for the Cybertan Wallmount EAP RAP630W-312G +image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-cybertan_rap630w_312g-squashfs-sysupgrade.tar +feeds: + - name: ipq807x + path: ../../feeds/ipq807x_v5.4 +packages: + - ipq50xx + - e2fsprogs + - losetup +include: + - ucentral-ap +diffconfig: | + CONFIG_KERNEL_IPQ_MEM_PROFILE=512