diff --git a/feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network b/feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network index c667adccb..68f1a5d24 100755 --- a/feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network +++ b/feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network @@ -102,10 +102,6 @@ qcom_setup_interfaces() ucidef_add_switch "switch1" \ "6@eth1" "1:lan" "2:lan" "3:lan" "4:lan" ;; - xunison,d50-5g) - ucidef_set_interface_wan "eth0" - ucidef_set_interface_lan "eth1" - ;; qcom,ipq5018-mp03.1) ucidef_set_interface_lan "eth1" ucidef_set_interface_wan "eth0" diff --git a/feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata b/feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata index 9c8fbc736..678ac332f 100755 --- a/feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata +++ b/feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata @@ -208,7 +208,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin) liteon,wpx8324|\ motorola,q14|\ muxi,ap3220l|\ - xunison,d50-5g|\ qcom,ipq5018-mp03.1) caldata_extract "0:ART" 0x1000 0x20000 ;; @@ -250,7 +249,6 @@ ath11k/QCN9074/hw1.0/caldata_1.bin) cig,wf196|\ wallys,dr6018-v4|\ cybertan,eww622-a1|\ - xunison,d50-5g|\ qcom,ipq5018-mp03.1|\ qcom,ipq807x-hk14) caldata_extract "0:ART" 0x26800 0x20000 @@ -289,7 +287,6 @@ ath11k-macs) indio,um-310ax-v1|\ indio,um-510axp-v1|\ indio,um-510axm-v1|\ - xunison,d50-5g|\ cig,wf188n) ath11k_generate_macs ;; diff --git a/feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh b/feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh index de7a411d7..30d4e23ff 100755 --- a/feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh +++ b/feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh @@ -162,8 +162,6 @@ platform_check_image() { qcom,ipq6018-cp01|\ qcom,ipq807x-hk01|\ qcom,ipq807x-hk14|\ - xunison,d50|\ - xunison,d50-5g|\ qcom,ipq5018-mp03.3) [ "$magic_long" = "73797375" ] && return 0 ;; @@ -202,8 +200,6 @@ platform_do_upgrade() { qcom,ipq6018-cp01|\ qcom,ipq807x-hk01|\ qcom,ipq807x-hk14|\ - xunison,d50|\ - xunison,d50-5g|\ qcom,ipq5018-mp03.3|\ wallys,dr5018|\ wallys,dr6018|\ diff --git a/feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-xunison-d50-5g.dts b/feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-xunison-d50-5g.dts deleted file mode 100644 index b7dbf32f1..000000000 --- a/feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-xunison-d50-5g.dts +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50-5g.dts" - -/ { - pmuv8: pmu { - compatible = "arm,cortex-a7-pmu"; - }; -}; diff --git a/feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-xunison-d50.dts b/feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-xunison-d50.dts deleted file mode 100644 index a0cc4cc20..000000000 --- a/feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-xunison-d50.dts +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50.dts" - -/ { - pmuv8: pmu { - compatible = "arm,cortex-a7-pmu"; - }; -}; diff --git a/feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50-5g.dts b/feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50-5g.dts deleted file mode 100755 index f89ab5a6d..000000000 --- a/feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50-5g.dts +++ /dev/null @@ -1,995 +0,0 @@ -/dts-v1/; -/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include "qcom-ipq5018.dtsi" - -/ { - #address-cells = <0x2>; - #size-cells = <0x2>; - model = "Xunison D50-5G"; - compatible = "xunison,d50-5g", "qcom,ipq5018-mp03.1", "qcom,ipq5018"; - interrupt-parent = <&intc>; - #ifdef __IPQ_MEM_PROFILE_256_MB__ - AUTO_MOUNT; - #endif - - aliases { - sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ - serial0 = &blsp1_uart1; - serial1 = &blsp1_uart2; - ethernet0 = "/soc/dp2"; - ethernet1 = "/soc/dp1"; - }; - - chosen { - bootargs = "console=ttyMSM0,115200,n8 rw init=/init"; - #ifdef __IPQ_MEM_PROFILE_256_MB__ - bootargs-append = " swiotlb=1"; - #else - bootargs-append = " swiotlb=1 coherent_pool=2M"; - #endif - stdout-path = "serial0"; - }; - - reserved-memory { - #ifdef __IPQ_MEM_PROFILE_256_MB__ - /* 256 MB Profile - * +=========+==============+========================+ - * | | | | - * | Region | Start Offset | Size | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | NSS | 0x40000000 | 8MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | | | | - * | Linux | 0x40800000 | Depends on total memory | - * | | | | - * | | | | - * | | | | - * + | | | - * +--------+--------------+-------------------------+ - * | | | | - * | uboot | 0x4A600000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | SBL | 0x4AA00000 | 1MB | - * +--------+--------------+-------------------------+ - * | smem | 0x4AB00000 | 1MB | - * +--------+--------------+-------------------------+ - * | | | | - * | TZ | 0x4AC00000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | Q6 | 0x4B000000 | 23MB | - * | | | | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | M3 Dump| 0x4C700000 | 1MB | - * +--------+--------------+-------------------------+ - * | QDSS | 0x4C800000 | 1MB | - * +--------+--------------+-------------------------+ - * | | | | - * |QCN9000 | 0x4C900000 | 17MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | MHI1 | 0x4DA00000 | 16MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | - * | Rest of the memory for Linux | - * | | - * +=================================================+ - */ - q6_region: wcnss@4b000000 { - no-map; - reg = <0x0 0x4b000000 0x0 0x01700000>; - }; - - m3_dump@4c700000 { - no-map; - reg = <0x0 0x4C700000 0x0 0x100000>; - }; - - q6_etr_region:q6_etr_dump@4c800000 { - no-map; - reg = <0x0 0x4c800000 0x0 0x100000>; - }; - - qcn9000_pcie0@4c900000 { - no-map; - reg = <0x0 0x4C900000 0x0 0x01100000>; - }; - - mhi_region1: dma_pool1@4da00000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x0 0x4da00000 0x0 0x01000000>; - }; - #elif __IPQ_MEM_PROFILE_512_MB__ - /* 512 MB Profile - * +=========+==============+========================+ - * | | | | - * | Region | Start Offset | Size | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | NSS | 0x40000000 | 16MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | | | | - * | Linux | 0x41000000 | Depends on total memory | - * | | | | - * | | | | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | uboot | 0x4A600000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | SBL | 0x4AA00000 | 1MB | - * +--------+--------------+-------------------------+ - * | smem | 0x4AB00000 | 1MB | - * +--------+--------------+-------------------------+ - * | | | | - * | TZ | 0x4AC00000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | Q6 | 0x4B000000 | 24MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | M3 Dump| 0x4C800000 | 1MB | - * +--------+--------------+-------------------------+ - * | QDSS | 0x4C900000 | 1MB | - * +--------+--------------+-------------------------+ - * | caldb | 0x4CA00000 | 2MB | - * +--------+--------------+-------------------------+ - * | | | | - * |QCN9000 | 0x4CC00000 | 30MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | MHI1 | 0x4EA00000 | 16MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | - * | Rest of the memory for Linux | - * | | - * +=================================================+ - */ - q6_region: wcnss@4b000000 { - no-map; - reg = <0x0 0x4b000000 0x0 0x01800000>; - }; - - m3_dump@4c800000 { - no-map; - reg = <0x0 0x4c800000 0x0 0x100000>; - }; - - q6_etr_region:q6_etr_dump@4c900000 { - no-map; - reg = <0x0 0x4c900000 0x0 0x100000>; - }; - - q6_caldb_region:q6_caldb_region@4ca00000 { - no-map; - reg = <0x0 0x4ca00000 0x0 0x200000>; - }; - - qcn9000_pcie0@4cc00000 { - no-map; - reg = <0x0 0x4CC00000 0x0 0x01E00000>; - }; - - mhi_region1: dma_pool1@4ea00000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x0 0x4ea00000 0x0 0x01000000>; - }; - #else - /* 1G Profile - * +=========+==============+========================+ - * | | | | - * | Region | Start Offset | Size | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | NSS | 0x40000000 | 16MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | | | | - * | Linux | 0x41000000 | Depends on total memory | - * | | | | - * | | | | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | uboot | 0x4A600000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | SBL | 0x4AA00000 | 1MB | - * +--------+--------------+-------------------------+ - * | smem | 0x4AB00000 | 1MB | - * +--------+--------------+-------------------------+ - * | | | | - * | TZ | 0x4AC00000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | Q6 | 0x4B000000 | 24MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | M3 Dump| 0x4C800000 | 1MB | - * +--------+--------------+-------------------------+ - * | QDSS | 0x4C900000 | 1MB | - * +--------+--------------+-------------------------+ - * | caldb | 0x4CA00000 | 2MB | - * +--------+--------------+-------------------------+ - * | | | | - * |QCN9000 | 0x4CC00000 | 45MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | MHI1 | 0x4F900000 | 24MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | - * | Rest of the memory for Linux | - * | | - * +=================================================+ - */ - q6_region: wcnss@4b000000 { - no-map; - reg = <0x0 0x4b000000 0x0 0x01800000>; - }; - - m3_dump@4c800000 { - no-map; - reg = <0x0 0x4c800000 0x0 0x100000>; - }; - - q6_etr_region:q6_etr_dump@4c900000 { - no-map; - reg = <0x0 0x4c900000 0x0 0x100000>; - }; - - q6_caldb_region:q6_caldb_region@4ca00000 { - no-map; - reg = <0x0 0x4ca00000 0x0 0x200000>; - }; - - qcn9000_pcie0@4cc00000 { - no-map; - reg = <0x0 0x4CC00000 0x0 0x02D00000>; - }; - - mhi_region1: dma_pool1@4F900000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x0 0x4F900000 0x0 0x01800000>; - }; - #endif - }; - - soc { - serial@78af000 { - status = "ok"; - }; - - blsp1_uart2: serial@78b0000 { - pinctrl-0 = <&blsp1_uart_pins>; - pinctrl-names = "default"; - }; - - qpic_bam: dma@7984000{ - status = "ok"; - }; - - nand: qpic-nand@79b0000 { - pinctrl-0 = <&qspi_nand_pins>; - pinctrl-names = "default"; - status = "ok"; - }; - - spi_0: spi@78b5000 { /* BLSP1 QUP0 */ - pinctrl-0 = <&blsp0_spi_pins>; - pinctrl-names = "default"; - cs-select = <0>; - status = "ok"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - compatible = "n25q128a11"; - linux,modalias = "m25p80", "n25q128a11"; - spi-max-frequency = <50000000>; - use-default-sizes; - }; - }; - - mdio0: mdio@88000 { - status = "ok"; - - ethernet-phy@0 { - reg = <7>; - }; - }; - - mdio1: mdio@90000 { - status = "ok"; - pinctrl-0 = <&mdio1_pins>; - pinctrl-names = "default"; - phy-reset-gpio = <&tlmm 39 0>; - ethernet-phy@0 { - reg = <0>; - }; - - ethernet-phy@1 { - reg = <1>; - }; - - ethernet-phy@2 { - reg = <2>; - }; - - ethernet-phy@3 { - reg = <3>; - }; - }; - - ess-instance { - num_devices = <0x2>; - ess-switch@0x39c00000 { - compatible = "qcom,ess-switch-ipq50xx"; - device_id = <0>; - switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/ - cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/ - qcom,port_phyinfo { - port@0 { - port_id = <1>; - phy_address = <7>; - }; - port@1 { - port_id = <2>; - forced-speed = <1000>; - forced-duplex = <1>; - }; - }; - led_source@0 { - source = <0>; - mode = "normal"; - speed = "all"; - blink_en = "enable"; - active = "high"; - }; - }; - ess-switch1@1 { - compatible = "qcom,ess-switch-qca83xx"; - device_id = <1>; - switch_access_mode = "mdio"; - mdio-bus = <&mdio1>; - reset_gpio = <0x27>; - switch_cpu_bmp = <0x40>; /* cpu port bitmap */ - switch_lan_bmp = <0x1e>; /* lan port bitmap */ - switch_wan_bmp = <0x0>; /* wan port bitmap */ - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x00010 0x2613a0 /* PORT6 FORCE MODE*/ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - qcom,port_phyinfo { - port@0 { - port_id = <1>; - phy_address = <0>; - }; - port@1 { - port_id = <2>; - phy_address = <1>; - }; - port@2 { - port_id = <3>; - phy_address = <2>; - }; - port@3 { - port_id = <4>; - phy_address = <3>; - }; - }; - }; - }; - - wifi0: wifi@c000000 { - qcom,bdf-addr = <0x4BA00000 0x4BA00000 0x4BA00000 - 0x0 0x0>; - qcom,caldb-addr = <0x4CA00000 0x4CA00000 0x4CA00000 - 0x0 0x0>; - qcom,caldb-size = <0x200000>; - status = "ok"; - }; - - ess-uniphy@98000 { - status = "disabled"; - }; - - qcom,sps { - status = "ok"; - }; - - qcom,usbbam@8B04000 { - status = "ok"; - }; - - qcom,diag@0 { - status = "ok"; - }; - - dp2 { - device_type = "network"; - compatible = "qcom,nss-dp"; - clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; - clock-names = "nss-snoc-gmac-axi-clk"; - qcom,id = <1>; - reg = <0x39C00000 0x10000>; - interrupts = ; - qcom,mactype = <2>; - qcom,link-poll = <1>; - qcom,phy-mdio-addr = <7>; - mdio-bus = <&mdio0>; - local-mac-address = [000000000000]; - phy-mode = "sgmii"; - }; - - dp1 { - device_type = "network"; - compatible = "qcom,nss-dp"; - clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; - clock-names = "nss-snoc-gmac-axi-clk"; - qcom,id = <2>; - reg = <0x39D00000 0x10000>; - interrupts = ; - qcom,mactype = <2>; - local-mac-address = [000000000000]; - phy-mode = "sgmii"; - }; - - rpm_etm0 { - status = "disabled"; - }; - - lpass: lpass@0xA000000{ - status = "disabled"; - }; - - pcm: pcm@0xA3C0000{ - pinctrl-0 = <&audio_pins>; - pinctrl-names = "default"; - status = "disabled"; - }; - - pcm_lb: pcm_lb@0 { - status = "disabled"; - }; - }; - - thermal-zones { - status = "ok"; - }; - - gpio_keys { - compatible = "gpio-keys-polled"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - poll-interval = <100>; - - button@0 { - label = "reset"; - linux,code = ; - gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - debounce-interval = <60>; - }; - button@1 { - label = "wps"; - linux,code = ; - gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - debounce-interval = <60>; - }; - - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&leds_pins>; - pinctrl-names = "default"; - - led@35 { - label = "green:4g"; - gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "led_5g_wifi"; - default-state = "off"; - }; - led@30 { - label = "green:wifi"; - gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "led_2g_wifi"; - default-state = "off"; - }; - led@1 { - label = "green:internet"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "led_voice"; - default-state = "off"; - }; - led@33 { - label = "green:lte"; - gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "led_lte_g"; - default-state = "off"; - }; - led@34 { - label = "red:lte"; - gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "led_lte_r"; - default-state = "off"; - }; - led@27 { - label = "green:mesh"; - gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "led_nr_g"; - default-state = "off"; - }; - led@28 { - label = "red:mesh"; - gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "led_nr_r"; - default-state = "off"; - }; - }; - - -}; - -&tlmm { - pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>; - pinctrl-names = "default"; - - blsp0_uart_pins: blsp0_uart_pins { - blsp0_uart_rx_tx { - pins = "gpio20", "gpio21"; - function = "blsp0_uart0"; - bias-disable; - }; - }; - - blsp1_uart_pins: blsp1_uart_pins { - blsp1_uart_rx_tx { - pins = "gpio23", "gpio25", "gpio24", "gpio26"; - function = "blsp1_uart2"; - bias-disable; - }; - }; - - blsp0_spi_pins: blsp0_spi_pins { - mux { - pins = "gpio10", "gpio11", "gpio12", "gpio13"; - function = "blsp0_spi"; - drive-strength = <2>; - bias-disable; - }; - }; - - qspi_nand_pins: qspi_nand_pins { - qspi_clock { - pins = "gpio9"; - function = "qspi_clk"; - drive-strength = <8>; - bias-disable; - }; - qspi_cs { - pins = "gpio8"; - function = "qspi_cs"; - drive-strength = <8>; - bias-disable; - }; - qspi_data_0 { - pins = "gpio7"; - function = "qspi0"; - drive-strength = <8>; - bias-disable; - }; - qspi_data_1 { - pins = "gpio6"; - function = "qspi1"; - drive-strength = <8>; - bias-disable; - }; - qspi_data_2 { - pins = "gpio5"; - function = "qspi2"; - drive-strength = <8>; - bias-disable; - }; - qspi_data_3 { - pins = "gpio4"; - function = "qspi3"; - drive-strength = <8>; - bias-disable; - }; - }; - - mdio1_pins: mdio_pinmux { - mux_0 { - pins = "gpio36"; - function = "mdc"; - drive-strength = <8>; - bias-pull-up; - }; - - mux_1 { - pins = "gpio37"; - function = "mdio"; - drive-strength = <8>; - bias-pull-up; - }; - }; - - phy_led_pins: phy_led_pins { - gephy_led_pin { - pins = "gpio46"; - function = "led0"; - drive-strength = <8>; - bias-pull-down; - }; - }; - - i2c_pins: i2c_pins { - i2c_scl { - pins = "gpio25"; - function = "blsp2_i2c1"; - drive-strength = <8>; - bias-disable; - }; - - i2c_sda { - pins = "gpio26"; - function = "blsp2_i2c1"; - drive-strength = <8>; - bias-disable; - }; - }; - - button_pins: button_pins { - reset_button{ - pins = "gpio22"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; - - wps_button { - pins = "gpio38"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; - - }; - - leds_pins: leds_pins { - led_5g_wifi { - pins = "gpio35"; - function = "gpio"; - drive-strength = <8>; - bias-pull-down; - }; - led_2g_wifi { - pins = "gpio30"; - function = "gpio"; - drive-strength = <8>; - bias-pull-down; - }; - led_lte_g { - pins = "gpio33"; - function = "gpio"; - drive-strength = <8>; - bias-pull-down; - }; - led_lte_r { - pins = "gpio34"; - function = "gpio"; - drive-strength = <8>; - bias-pull-down; - }; - led_nr_g { - pins = "gpio27"; - function = "gpio"; - drive-strength = <8>; - bias-pull-down; - }; - led_nr_r { - pins = "gpio28"; - function = "gpio"; - drive-strength = <8>; - bias-pull-down; - }; - led_voice { - pins = "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-pull-down; - }; - }; - - audio_pins: audio_pinmux { - mux_1 { - pins = "gpio24"; - function = "audio_rxbclk"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_2 { - pins = "gpio25"; - function = "audio_rxfsync"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_3 { - pins = "gpio26"; - function = "audio_rxd"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_4 { - pins = "gpio27"; - function = "audio_txmclk"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_5 { - pins = "gpio28"; - function = "audio_txbclk"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_6 { - pins = "gpio29"; - function = "audio_txfsync"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_7 { - pins = "gpio30"; - function = "audio_txd"; - drive-strength = <8>; - bias-pull-down; - }; - }; - -}; - -&usb3 { - qcom,multiplexed-phy; - qcom,phy-mux-regs = <&tcsr_q6_block 0x2540>; - device-power-gpio = <&tlmm 24 1>; - status = "ok"; -}; - -&eud { - status = "ok"; -}; - -&pcie_x1 { - status = "disabled"; - perst-gpio = <&tlmm 18 1>; -}; - -&pcie_x2 { - status = "ok"; - perst-gpio = <&tlmm 15 1>; -}; - -&bt { - status = "ok"; -}; - -&wcss { - status = "ok"; -}; - -&q6v5_wcss { - status = "disabled"; -}; - -&q6v5_m3 { - status = "disabled"; -}; - -&tcsr_mutex_block { - status = "ok"; -}; - -&tcsr_mutex { - status = "ok"; -}; - -&smem { - status = "ok"; -}; - -&apcs_glb { - status = "ok"; -}; - -&tcsr_q6_block { - status = "ok"; -}; - -&qcom_q6v5_wcss { - #ifdef __IPQ_MEM_PROFILE_256_MB__ - memory-region = <&q6_region>, <&q6_etr_region>; - #else - memory-region = <&q6_region>, <&q6_etr_region>, - <&q6_caldb_region>; - #endif - /* IPQ5018 */ - q6v5_wcss_userpd1 { - m3_firmware = "IPQ5018/m3_fw.mdt"; - interrupts-extended = <&wcss_smp2p_in 8 0>, - <&wcss_smp2p_in 9 0>, - <&wcss_smp2p_in 12 0>, - <&wcss_smp2p_in 11 0>; - interrupt-names ="fatal", - "ready", - "spawn_ack", - "stop-ack"; - qcom,smem-states = <&wcss_smp2p_out 8>, - <&wcss_smp2p_out 9>, - <&wcss_smp2p_out 10>; - qcom,smem-state-names = "shutdown", - "stop", - "spawn"; - qca,asid = <1>; - qca,auto-restart; - qca,int_radio; - }; -}; - -&i2c_0 { - pinctrl-0 = <&i2c_pins>; - pinctrl-names = "default"; - status = "disabled"; -}; - -&dbm_1p5 { - status = "ok"; -}; - -&msm_imem { - status = "ok"; -}; - -&blsp1_uart1 { - status = "ok"; -}; - -&ssuniphy_0 { - status = "ok"; -}; - -&hs_m31phy_0 { - status = "ok"; -}; - -&pcie_x1phy { - status = "disabled"; -}; - -&pcie_x2phy { - status = "ok"; -}; - -&pcie_x1_rp { - status = "disabled"; - - mhi_0: qcom,mhi@0 { - reg = <0 0 0 0 0 >; - }; -}; - -&pcie_x2_rp { - status = "ok"; - - mhi_1: qcom,mhi@1 { - reg = <0 0 0 0 0 >; - qrtr_instance_id = <0x20>; - #address-cells = <0x2>; - #size-cells = <0x2>; - memory-region = <&mhi_region1>; -#if !defined(__CNSS2__) - base-addr = <0x4CC00000>; - m3-dump-addr = <0x4E000000>; - etr-addr = <0x4E100000>; - qcom,caldb-addr = <0x4E200000>; - qcom,tgt-mem-mode = <0x1>; - mhi,max-channels = <30>; - mhi,timeout = <10000>; -#endif - }; -}; - -&wifi0 { - /* IPQ5018 */ - qcom,board_id = <0x24>; - status = "ok"; -}; - -&wifi3 { - /* QCN9000 5G */ - board_id = <0xa0>; - status = "ok"; -}; - -&qfprom { - status = "ok"; -}; - -&tsens { - status = "ok"; -}; diff --git a/feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50.dts b/feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50.dts deleted file mode 100644 index dd50ba58c..000000000 --- a/feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50.dts +++ /dev/null @@ -1,884 +0,0 @@ -/dts-v1/; -/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include "qcom-ipq5018.dtsi" - -/ { - #address-cells = <0x2>; - #size-cells = <0x2>; - model = "Xunison D50"; - compatible = "xunison,d50", "qcom,ipq5018-mp03.1", "qcom,ipq5018"; - interrupt-parent = <&intc>; - #ifdef __IPQ_MEM_PROFILE_256_MB__ - AUTO_MOUNT; - #endif - - aliases { - sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ - serial0 = &blsp1_uart1; - serial1 = &blsp1_uart2; - ethernet0 = "/soc/dp1"; - ethernet1 = "/soc/dp2"; - }; - - chosen { - bootargs = "console=ttyMSM0,115200,n8 rw init=/init"; - #ifdef __IPQ_MEM_PROFILE_256_MB__ - bootargs-append = " swiotlb=1"; - #else - bootargs-append = " swiotlb=1 coherent_pool=2M"; - #endif - stdout-path = "serial0"; - }; - - reserved-memory { - #ifdef __IPQ_MEM_PROFILE_256_MB__ - /* 256 MB Profile - * +=========+==============+========================+ - * | | | | - * | Region | Start Offset | Size | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | NSS | 0x40000000 | 8MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | | | | - * | Linux | 0x40800000 | Depends on total memory | - * | | | | - * | | | | - * | | | | - * + | | | - * +--------+--------------+-------------------------+ - * | | | | - * | uboot | 0x4A600000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | SBL | 0x4AA00000 | 1MB | - * +--------+--------------+-------------------------+ - * | smem | 0x4AB00000 | 1MB | - * +--------+--------------+-------------------------+ - * | | | | - * | TZ | 0x4AC00000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | Q6 | 0x4B000000 | 23MB | - * | | | | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | M3 Dump| 0x4C700000 | 1MB | - * +--------+--------------+-------------------------+ - * | QDSS | 0x4C800000 | 1MB | - * +--------+--------------+-------------------------+ - * | | | | - * |QCN9000 | 0x4C900000 | 17MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | MHI1 | 0x4DA00000 | 16MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | - * | Rest of the memory for Linux | - * | | - * +=================================================+ - */ - q6_region: wcnss@4b000000 { - no-map; - reg = <0x0 0x4b000000 0x0 0x01700000>; - }; - - m3_dump@4c700000 { - no-map; - reg = <0x0 0x4C700000 0x0 0x100000>; - }; - - q6_etr_region:q6_etr_dump@4c800000 { - no-map; - reg = <0x0 0x4c800000 0x0 0x100000>; - }; - - qcn9000_pcie0@4c900000 { - no-map; - reg = <0x0 0x4C900000 0x0 0x01100000>; - }; - - mhi_region1: dma_pool1@4da00000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x0 0x4da00000 0x0 0x01000000>; - }; - #elif __IPQ_MEM_PROFILE_512_MB__ - /* 512 MB Profile - * +=========+==============+========================+ - * | | | | - * | Region | Start Offset | Size | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | NSS | 0x40000000 | 16MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | | | | - * | Linux | 0x41000000 | Depends on total memory | - * | | | | - * | | | | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | uboot | 0x4A600000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | SBL | 0x4AA00000 | 1MB | - * +--------+--------------+-------------------------+ - * | smem | 0x4AB00000 | 1MB | - * +--------+--------------+-------------------------+ - * | | | | - * | TZ | 0x4AC00000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | Q6 | 0x4B000000 | 24MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | M3 Dump| 0x4C800000 | 1MB | - * +--------+--------------+-------------------------+ - * | QDSS | 0x4C900000 | 1MB | - * +--------+--------------+-------------------------+ - * | caldb | 0x4CA00000 | 2MB | - * +--------+--------------+-------------------------+ - * | | | | - * |QCN9000 | 0x4CC00000 | 30MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | MHI1 | 0x4EA00000 | 16MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | - * | Rest of the memory for Linux | - * | | - * +=================================================+ - */ - q6_region: wcnss@4b000000 { - no-map; - reg = <0x0 0x4b000000 0x0 0x01800000>; - }; - - m3_dump@4c800000 { - no-map; - reg = <0x0 0x4c800000 0x0 0x100000>; - }; - - q6_etr_region:q6_etr_dump@4c900000 { - no-map; - reg = <0x0 0x4c900000 0x0 0x100000>; - }; - - q6_caldb_region:q6_caldb_region@4ca00000 { - no-map; - reg = <0x0 0x4ca00000 0x0 0x200000>; - }; - - qcn9000_pcie0@4cc00000 { - no-map; - reg = <0x0 0x4CC00000 0x0 0x01E00000>; - }; - - mhi_region1: dma_pool1@4ea00000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x0 0x4ea00000 0x0 0x01000000>; - }; - #else - /* 1G Profile - * +=========+==============+========================+ - * | | | | - * | Region | Start Offset | Size | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | NSS | 0x40000000 | 16MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | | | | - * | Linux | 0x41000000 | Depends on total memory | - * | | | | - * | | | | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | uboot | 0x4A600000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | SBL | 0x4AA00000 | 1MB | - * +--------+--------------+-------------------------+ - * | smem | 0x4AB00000 | 1MB | - * +--------+--------------+-------------------------+ - * | | | | - * | TZ | 0x4AC00000 | 4MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | | | | - * | | | | - * | Q6 | 0x4B000000 | 24MB | - * | | | | - * | | | | - * +--------+--------------+-------------------------+ - * | M3 Dump| 0x4C800000 | 1MB | - * +--------+--------------+-------------------------+ - * | QDSS | 0x4C900000 | 1MB | - * +--------+--------------+-------------------------+ - * | caldb | 0x4CA00000 | 2MB | - * +--------+--------------+-------------------------+ - * | | | | - * |QCN9000 | 0x4CC00000 | 45MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | | | - * | MHI1 | 0x4F900000 | 24MB | - * | | | | - * +--------+--------------+-------------------------+ - * | | - * | Rest of the memory for Linux | - * | | - * +=================================================+ - */ - q6_region: wcnss@4b000000 { - no-map; - reg = <0x0 0x4b000000 0x0 0x01800000>; - }; - - m3_dump@4c800000 { - no-map; - reg = <0x0 0x4c800000 0x0 0x100000>; - }; - - q6_etr_region:q6_etr_dump@4c900000 { - no-map; - reg = <0x0 0x4c900000 0x0 0x100000>; - }; - - q6_caldb_region:q6_caldb_region@4ca00000 { - no-map; - reg = <0x0 0x4ca00000 0x0 0x200000>; - }; - - qcn9000_pcie0@4cc00000 { - no-map; - reg = <0x0 0x4CC00000 0x0 0x02D00000>; - }; - - mhi_region1: dma_pool1@4F900000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x0 0x4F900000 0x0 0x01800000>; - }; - #endif - }; - - soc { - serial@78af000 { - status = "ok"; - }; - - blsp1_uart2: serial@78b0000 { - pinctrl-0 = <&blsp1_uart_pins>; - pinctrl-names = "default"; - }; - - qpic_bam: dma@7984000{ - status = "ok"; - }; - - nand: qpic-nand@79b0000 { - pinctrl-0 = <&qspi_nand_pins>; - pinctrl-names = "default"; - status = "ok"; - }; - - spi_0: spi@78b5000 { /* BLSP1 QUP0 */ - pinctrl-0 = <&blsp0_spi_pins>; - pinctrl-names = "default"; - cs-select = <0>; - status = "ok"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - compatible = "n25q128a11"; - linux,modalias = "m25p80", "n25q128a11"; - spi-max-frequency = <50000000>; - use-default-sizes; - }; - }; - - mdio0: mdio@88000 { - status = "ok"; - - ethernet-phy@0 { - reg = <7>; - }; - }; - - mdio1: mdio@90000 { - status = "ok"; - pinctrl-0 = <&mdio1_pins>; - pinctrl-names = "default"; - phy-reset-gpio = <&tlmm 39 0>; - ethernet-phy@0 { - reg = <0>; - }; - - ethernet-phy@1 { - reg = <1>; - }; - - ethernet-phy@2 { - reg = <2>; - }; - - ethernet-phy@3 { - reg = <3>; - }; - }; - - ess-instance { - num_devices = <0x2>; - ess-switch@0x39c00000 { - compatible = "qcom,ess-switch-ipq50xx"; - device_id = <0>; - switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/ - cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/ - qcom,port_phyinfo { - port@0 { - port_id = <1>; - phy_address = <7>; - }; - port@1 { - port_id = <2>; - forced-speed = <1000>; - forced-duplex = <1>; - }; - }; - led_source@0 { - source = <0>; - mode = "normal"; - speed = "all"; - blink_en = "enable"; - active = "high"; - }; - }; - ess-switch1@1 { - compatible = "qcom,ess-switch-qca83xx"; - device_id = <1>; - switch_access_mode = "mdio"; - mdio-bus = <&mdio1>; - reset_gpio = <0x27>; - switch_cpu_bmp = <0x40>; /* cpu port bitmap */ - switch_lan_bmp = <0x1e>; /* lan port bitmap */ - switch_wan_bmp = <0x0>; /* wan port bitmap */ - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x00010 0x2613a0 /* PORT6 FORCE MODE*/ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - qcom,port_phyinfo { - port@0 { - port_id = <1>; - phy_address = <0>; - }; - port@1 { - port_id = <2>; - phy_address = <1>; - }; - port@2 { - port_id = <3>; - phy_address = <2>; - }; - port@3 { - port_id = <4>; - phy_address = <3>; - }; - }; - }; - }; - - wifi0: wifi@c000000 { - qcom,bdf-addr = <0x4BA00000 0x4BA00000 0x4BA00000 - 0x0 0x0>; - qcom,caldb-addr = <0x4CA00000 0x4CA00000 0x4CA00000 - 0x0 0x0>; - qcom,caldb-size = <0x200000>; - status = "ok"; - }; - - ess-uniphy@98000 { - status = "disabled"; - }; - - qcom,sps { - status = "ok"; - }; - - qcom,usbbam@8B04000 { - status = "ok"; - }; - - qcom,diag@0 { - status = "ok"; - }; - - dp1 { - device_type = "network"; - compatible = "qcom,nss-dp"; - clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; - clock-names = "nss-snoc-gmac-axi-clk"; - qcom,id = <1>; - reg = <0x39C00000 0x10000>; - interrupts = ; - qcom,mactype = <2>; - qcom,link-poll = <1>; - qcom,phy-mdio-addr = <7>; - mdio-bus = <&mdio0>; - local-mac-address = [000000000000]; - phy-mode = "sgmii"; - }; - - dp2 { - device_type = "network"; - compatible = "qcom,nss-dp"; - clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; - clock-names = "nss-snoc-gmac-axi-clk"; - qcom,id = <2>; - reg = <0x39D00000 0x10000>; - interrupts = ; - qcom,mactype = <2>; - local-mac-address = [000000000000]; - phy-mode = "sgmii"; - }; - - rpm_etm0 { - status = "disabled"; - }; - - lpass: lpass@0xA000000{ - status = "disabled"; - }; - - pcm: pcm@0xA3C0000{ - pinctrl-0 = <&audio_pins>; - pinctrl-names = "default"; - status = "disabled"; - }; - - pcm_lb: pcm_lb@0 { - status = "disabled"; - }; - }; - - thermal-zones { - status = "ok"; - }; -}; - -&tlmm { - pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>; - pinctrl-names = "default"; - - blsp0_uart_pins: blsp0_uart_pins { - blsp0_uart_rx_tx { - pins = "gpio20", "gpio21"; - function = "blsp0_uart0"; - bias-disable; - }; - }; - - blsp1_uart_pins: blsp1_uart_pins { - blsp1_uart_rx_tx { - pins = "gpio23", "gpio25", "gpio24", "gpio26"; - function = "blsp1_uart2"; - bias-disable; - }; - }; - - blsp0_spi_pins: blsp0_spi_pins { - mux { - pins = "gpio10", "gpio11", "gpio12", "gpio13"; - function = "blsp0_spi"; - drive-strength = <2>; - bias-disable; - }; - }; - - qspi_nand_pins: qspi_nand_pins { - qspi_clock { - pins = "gpio9"; - function = "qspi_clk"; - drive-strength = <8>; - bias-disable; - }; - qspi_cs { - pins = "gpio8"; - function = "qspi_cs"; - drive-strength = <8>; - bias-disable; - }; - qspi_data_0 { - pins = "gpio7"; - function = "qspi0"; - drive-strength = <8>; - bias-disable; - }; - qspi_data_1 { - pins = "gpio6"; - function = "qspi1"; - drive-strength = <8>; - bias-disable; - }; - qspi_data_2 { - pins = "gpio5"; - function = "qspi2"; - drive-strength = <8>; - bias-disable; - }; - qspi_data_3 { - pins = "gpio4"; - function = "qspi3"; - drive-strength = <8>; - bias-disable; - }; - }; - - mdio1_pins: mdio_pinmux { - mux_0 { - pins = "gpio36"; - function = "mdc"; - drive-strength = <8>; - bias-pull-up; - }; - - mux_1 { - pins = "gpio37"; - function = "mdio"; - drive-strength = <8>; - bias-pull-up; - }; - }; - - phy_led_pins: phy_led_pins { - gephy_led_pin { - pins = "gpio46"; - function = "led0"; - drive-strength = <8>; - bias-pull-down; - }; - }; - - i2c_pins: i2c_pins { - i2c_scl { - pins = "gpio25"; - function = "blsp2_i2c1"; - drive-strength = <8>; - bias-disable; - }; - - i2c_sda { - pins = "gpio26"; - function = "blsp2_i2c1"; - drive-strength = <8>; - bias-disable; - }; - }; - - button_pins: button_pins { - wps_button { - pins = "gpio38"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; - }; - - audio_pins: audio_pinmux { - mux_1 { - pins = "gpio24"; - function = "audio_rxbclk"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_2 { - pins = "gpio25"; - function = "audio_rxfsync"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_3 { - pins = "gpio26"; - function = "audio_rxd"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_4 { - pins = "gpio27"; - function = "audio_txmclk"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_5 { - pins = "gpio28"; - function = "audio_txbclk"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_6 { - pins = "gpio29"; - function = "audio_txfsync"; - drive-strength = <8>; - bias-pull-down; - }; - - mux_7 { - pins = "gpio30"; - function = "audio_txd"; - drive-strength = <8>; - bias-pull-down; - }; - }; - -}; - -&soc { - gpio_keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - button@1 { - label = "wps"; - linux,code = ; - gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - debounce-interval = <60>; - }; - }; -}; - -&usb3 { - qcom,multiplexed-phy; - qcom,phy-mux-regs = <&tcsr_q6_block 0x2540>; - device-power-gpio = <&tlmm 24 1>; - status = "ok"; -}; - -&eud { - status = "ok"; -}; - -&pcie_x1 { - status = "disabled"; - perst-gpio = <&tlmm 18 1>; -}; - -&pcie_x2 { - status = "ok"; - perst-gpio = <&tlmm 15 1>; -}; - -&bt { - status = "ok"; -}; - -&wcss { - status = "ok"; -}; - -&q6v5_wcss { - status = "disabled"; -}; - -&q6v5_m3 { - status = "disabled"; -}; - -&tcsr_mutex_block { - status = "ok"; -}; - -&tcsr_mutex { - status = "ok"; -}; - -&smem { - status = "ok"; -}; - -&apcs_glb { - status = "ok"; -}; - -&tcsr_q6_block { - status = "ok"; -}; - -&qcom_q6v5_wcss { - #ifdef __IPQ_MEM_PROFILE_256_MB__ - memory-region = <&q6_region>, <&q6_etr_region>; - #else - memory-region = <&q6_region>, <&q6_etr_region>, - <&q6_caldb_region>; - #endif - /* IPQ5018 */ - q6v5_wcss_userpd1 { - m3_firmware = "IPQ5018/m3_fw.mdt"; - interrupts-extended = <&wcss_smp2p_in 8 0>, - <&wcss_smp2p_in 9 0>, - <&wcss_smp2p_in 12 0>, - <&wcss_smp2p_in 11 0>; - interrupt-names ="fatal", - "ready", - "spawn_ack", - "stop-ack"; - qcom,smem-states = <&wcss_smp2p_out 8>, - <&wcss_smp2p_out 9>, - <&wcss_smp2p_out 10>; - qcom,smem-state-names = "shutdown", - "stop", - "spawn"; - qca,asid = <1>; - qca,auto-restart; - qca,int_radio; - }; -}; - -&i2c_0 { - pinctrl-0 = <&i2c_pins>; - pinctrl-names = "default"; - status = "disabled"; -}; - -&dbm_1p5 { - status = "ok"; -}; - -&msm_imem { - status = "ok"; -}; - -&blsp1_uart1 { - status = "ok"; -}; - -&ssuniphy_0 { - status = "ok"; -}; - -&hs_m31phy_0 { - status = "ok"; -}; - -&pcie_x1phy { - status = "disabled"; -}; - -&pcie_x2phy { - status = "ok"; -}; - -&pcie_x1_rp { - status = "disabled"; - - mhi_0: qcom,mhi@0 { - reg = <0 0 0 0 0 >; - }; -}; - -&pcie_x2_rp { - status = "ok"; - - mhi_1: qcom,mhi@1 { - reg = <0 0 0 0 0 >; - qrtr_instance_id = <0x20>; - #address-cells = <0x2>; - #size-cells = <0x2>; - memory-region = <&mhi_region1>; -#if !defined(__CNSS2__) - base-addr = <0x4CC00000>; - m3-dump-addr = <0x4E000000>; - etr-addr = <0x4E100000>; - qcom,caldb-addr = <0x4E200000>; - qcom,tgt-mem-mode = <0x1>; - mhi,max-channels = <30>; - mhi,timeout = <10000>; -#endif - }; -}; - -&wifi0 { - /* IPQ5018 */ - qcom,board_id = <0x24>; - status = "ok"; -}; - -&wifi3 { - /* QCN9000 5G */ - board_id = <0xa0>; - status = "ok"; -}; - -&qfprom { - status = "ok"; -}; - -&tsens { - status = "ok"; -}; diff --git a/feeds/ipq807x/ipq807x/image/ipq50xx.mk b/feeds/ipq807x/ipq807x/image/ipq50xx.mk index da7c77725..9975a1254 100644 --- a/feeds/ipq807x/ipq807x/image/ipq50xx.mk +++ b/feeds/ipq807x/ipq807x/image/ipq50xx.mk @@ -165,29 +165,3 @@ define Device/yuncore_fap655 endef TARGET_DEVICES += yuncore_fap655 -define Device/xunison_d50-5g - DEVICE_TITLE := Xunison D50-5G - DEVICE_DTS := qcom-ipq5018-xunison-d50-5g - SUPPORTED_DEVICES := xunison,d50_5g - DEVICE_PACKAGES := ath11k-wifi-xunison-d50 ath11k-firmware-ipq50xx ath11k-firmware-qcn9000 - DEVICE_DTS_CONFIG := config@mp03.1 - IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi - IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata - IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand - IMAGE/nand-factory.ubi := append-ubi -endef -TARGET_DEVICES += xunison_d50-5g - -define Device/xunison_d50 - DEVICE_TITLE := Xunison D50 - DEVICE_DTS := qcom-ipq5018-xunison-d50 - SUPPORTED_DEVICES := xunison,d50 - DEVICE_PACKAGES := ath11k-wifi-xunison-d50 ath11k-firmware-ipq50xx ath11k-firmware-qcn9000 ath11k-firmware-qcn6122 - DEVICE_DTS_CONFIG := config@mp03.1 - IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi - IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata - IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand - IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand - IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand -endef -TARGET_DEVICES += xunison_d50 diff --git a/feeds/wifi-ax/ath11k-wifi/Makefile b/feeds/wifi-ax/ath11k-wifi/Makefile index 0e0377d59..1a4a9d247 100644 --- a/feeds/wifi-ax/ath11k-wifi/Makefile +++ b/feeds/wifi-ax/ath11k-wifi/Makefile @@ -128,11 +128,6 @@ $(call Package/ath11k-wifi-default) TITLE:=motorola q14 bdf endef -define Package/ath11k-wifi-xunison-d50 -$(call Package/ath11k-wifi-default) - TITLE:=xunison d50 bdf -endef - define Package/ath11k-wifi-plasmacloud-pax1800 $(call Package/ath11k-wifi-default) TITLE:=plasmacloud-pax1800(-v2) bdf @@ -279,13 +274,6 @@ define Package/ath11k-wifi-cig-wf196_6g-us/install echo -n 'US' > $(1)/lib/firmware/country endef -define Package/ath11k-wifi-xunison-d50/install - $(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/ - $(INSTALL_DIR) $(1)/lib/firmware/ath11k/QCN9074/hw1.0/ - $(INSTALL_DATA) ./board-xunison-d50.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin - $(INSTALL_DATA) ./board-xunison-d50.bin.QCN9074 $(1)/lib/firmware/ath11k/QCN9074/hw1.0/board.bin -endef - define Package/ath11k-wifi-gl-ax1800/install $(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/ $(INSTALL_DATA) ./board-gl-ax1800.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board-2.bin @@ -400,7 +388,6 @@ $(eval $(call BuildPackage,ath11k-wifi-cig-wf188n-us)) $(eval $(call BuildPackage,ath11k-wifi-cig-wf196_6g-ca)) $(eval $(call BuildPackage,ath11k-wifi-cig-wf196_6g-us)) $(eval $(call BuildPackage,ath11k-wifi-motorola-q14)) -$(eval $(call BuildPackage,ath11k-wifi-xunison-d50)) $(eval $(call BuildPackage,ath11k-wifi-hfcl-ion4xi)) $(eval $(call BuildPackage,ath11k-wifi-hfcl-ion4xi_wp)) $(eval $(call BuildPackage,ath11k-wifi-hfcl-ion4xi_w)) diff --git a/feeds/wifi-ax/ath11k-wifi/board-xunison-d50.bin.IPQ5018 b/feeds/wifi-ax/ath11k-wifi/board-xunison-d50.bin.IPQ5018 deleted file mode 100644 index b65d6bc71..000000000 Binary files a/feeds/wifi-ax/ath11k-wifi/board-xunison-d50.bin.IPQ5018 and /dev/null differ diff --git a/feeds/wifi-ax/ath11k-wifi/board-xunison-d50.bin.QCN9074 b/feeds/wifi-ax/ath11k-wifi/board-xunison-d50.bin.QCN9074 deleted file mode 100644 index 86c84f2e2..000000000 Binary files a/feeds/wifi-ax/ath11k-wifi/board-xunison-d50.bin.QCN9074 and /dev/null differ