mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-10-29 09:32:34 +00:00
mediatek: Update ethernet driver to support PHY AN8801 on Edgecore EAP111
Signed-off-by: Sebastian Huang <sebastian_huang@accton.com>
This commit is contained in:
Sebastian Huang
committed by
Arif Alam
Arif Alam
parent
bc95100ccf
commit
8bd4573262
@@ -173,6 +173,16 @@
|
|||||||
compatible = "ethernet-phy-id03a2.9471";
|
compatible = "ethernet-phy-id03a2.9471";
|
||||||
phy-mode = "sgmii";
|
phy-mode = "sgmii";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
an8801sb: ethernet-phy@30 {
|
||||||
|
reg = <30>;
|
||||||
|
compatible = "ethernet-phy-idc0ff.0421";
|
||||||
|
phy-mode = "sgmii";
|
||||||
|
full-duplex;
|
||||||
|
pause;
|
||||||
|
airoha,surge = <0>;
|
||||||
|
airoha,polarity = <2>;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
ð {
|
ð {
|
||||||
@@ -184,7 +194,8 @@
|
|||||||
compatible = "mediatek,eth-mac";
|
compatible = "mediatek,eth-mac";
|
||||||
reg = <0>;
|
reg = <0>;
|
||||||
phy-mode = "sgmii";
|
phy-mode = "sgmii";
|
||||||
phy-handle = <&en8801sc>;
|
phy-handle = <&an8801sb>;
|
||||||
|
phy-handle2 = <&en8801sc>;
|
||||||
managed = "in-band-status";
|
managed = "in-band-status";
|
||||||
nvmem-cells = <&macaddr_lan>;
|
nvmem-cells = <&macaddr_lan>;
|
||||||
nvmem-cell-names = "mac-address";
|
nvmem-cell-names = "mac-address";
|
||||||
|
|||||||
1534
feeds/mediatek/mediatek/files-6.6/drivers/net/phy/an8801.c
Normal file
1534
feeds/mediatek/mediatek/files-6.6/drivers/net/phy/an8801.c
Normal file
File diff suppressed because it is too large
Load Diff
233
feeds/mediatek/mediatek/files-6.6/drivers/net/phy/an8801.h
Normal file
233
feeds/mediatek/mediatek/files-6.6/drivers/net/phy/an8801.h
Normal file
@@ -0,0 +1,233 @@
|
|||||||
|
/* SPDX-License-Identifier: GPL-2.0 */
|
||||||
|
/*PURPOSE:
|
||||||
|
*Define Airoha phy driver function
|
||||||
|
*
|
||||||
|
*NOTES:
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __AN8801_H
|
||||||
|
#define __AN8801_H
|
||||||
|
|
||||||
|
/* NAMING DECLARATIONS
|
||||||
|
*/
|
||||||
|
#define AN8801_DRIVER_VERSION "1.1.7"
|
||||||
|
|
||||||
|
#define DEBUGFS_COUNTER "counter"
|
||||||
|
#define DEBUGFS_INFO "driver_info"
|
||||||
|
#define DEBUGFS_PBUS_OP "pbus_op"
|
||||||
|
#define DEBUGFS_POLARITY "polarity"
|
||||||
|
#define DEBUGFS_MDIO "mdio"
|
||||||
|
|
||||||
|
#define AN8801_MDIO_PHY_ID 0x1
|
||||||
|
#define AN8801_PHY_ID1 0xc0ff
|
||||||
|
#define AN8801_PHY_ID2 0x0421
|
||||||
|
#define AN8801_PHY_ID ((u32)((AN8801_PHY_ID1 << 16) | AN8801_PHY_ID2))
|
||||||
|
|
||||||
|
#define TRUE 1
|
||||||
|
#define FALSE 0
|
||||||
|
#define LINK_UP 1
|
||||||
|
#define LINK_DOWN 0
|
||||||
|
|
||||||
|
#define MAX_LED_SIZE 3
|
||||||
|
|
||||||
|
#define MAX_RETRY 5
|
||||||
|
|
||||||
|
#define AN8801_EPHY_ADDR 0x11000000
|
||||||
|
#define AN8801_CL22 0x00800000
|
||||||
|
|
||||||
|
#define LED_ENABLE 1
|
||||||
|
#define LED_DISABLE 0
|
||||||
|
|
||||||
|
#define AN8801SB_DEBUGFS
|
||||||
|
|
||||||
|
#ifndef BIT
|
||||||
|
#define BIT(nr) (1 << (nr))
|
||||||
|
#endif
|
||||||
|
#ifndef GET_BIT
|
||||||
|
#define GET_BIT(val, bit) ((val & BIT(bit)) >> bit)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define LED_BCR (0x021)
|
||||||
|
#define LED_BCR_EXT_CTRL BIT(15)
|
||||||
|
#define LED_BCR_EVT_ALL BIT(4)
|
||||||
|
#define LED_BCR_CLK_EN BIT(3)
|
||||||
|
#define LED_BCR_TIME_TEST BIT(2)
|
||||||
|
#define LED_BCR_MODE_MASK (3)
|
||||||
|
#define LED_BCR_MODE_DISABLE (0)
|
||||||
|
#define LED_BCR_MODE_2LED (1)
|
||||||
|
#define LED_BCR_MODE_3LED_1 (2)
|
||||||
|
#define LED_BCR_MODE_3LED_2 (3)
|
||||||
|
|
||||||
|
#define LED_ON_DUR (0x022)
|
||||||
|
#define LED_ON_DUR_MASK (0xffff)
|
||||||
|
|
||||||
|
#define LED_BLK_DUR (0x023)
|
||||||
|
#define LED_BLK_DUR_MASK (0xffff)
|
||||||
|
|
||||||
|
#define LED_ON_CTRL(i) (0x024 + ((i) * 2))
|
||||||
|
#define LED_ON_EN BIT(15)
|
||||||
|
#define LED_ON_POL BIT(14)
|
||||||
|
#define LED_ON_EVT_MASK (0x7f)
|
||||||
|
#define LED_ON_EVT_FORCE BIT(6)
|
||||||
|
#define LED_ON_EVT_HDX BIT(5)
|
||||||
|
#define LED_ON_EVT_FDX BIT(4)
|
||||||
|
#define LED_ON_EVT_LINK_DN BIT(3)
|
||||||
|
#define LED_ON_EVT_LINK_10M BIT(2)
|
||||||
|
#define LED_ON_EVT_LINK_100M BIT(1)
|
||||||
|
#define LED_ON_EVT_LINK_1000M BIT(0)
|
||||||
|
|
||||||
|
#define LED_BLK_CTRL(i) (0x025 + ((i) * 2))
|
||||||
|
#define LED_BLK_EVT_MASK (0x3ff)
|
||||||
|
#define LED_BLK_EVT_FORCE BIT(9)
|
||||||
|
#define LED_BLK_EVT_10M_RX BIT(5)
|
||||||
|
#define LED_BLK_EVT_10M_TX BIT(4)
|
||||||
|
#define LED_BLK_EVT_100M_RX BIT(3)
|
||||||
|
#define LED_BLK_EVT_100M_TX BIT(2)
|
||||||
|
#define LED_BLK_EVT_1000M_RX BIT(1)
|
||||||
|
#define LED_BLK_EVT_1000M_TX BIT(0)
|
||||||
|
|
||||||
|
#define UNIT_LED_BLINK_DURATION 780
|
||||||
|
|
||||||
|
/* Serdes auto negotiation restart */
|
||||||
|
#define AN8801SB_SGMII_AN0_ANRESTART (0x0200)
|
||||||
|
#define AN8801SB_SGMII_AN0_AN_DONE (0x0001)
|
||||||
|
#define AN8801SB_SGMII_AN0_RESET (0x8000)
|
||||||
|
|
||||||
|
|
||||||
|
#define PHY_PRE_SPEED_REG (0x2b)
|
||||||
|
|
||||||
|
#define MMD_DEV_VSPEC1 (0x1E)
|
||||||
|
#define MMD_DEV_VSPEC2 (0x1F)
|
||||||
|
|
||||||
|
#define RGMII_DELAY_STEP_MASK 0x7
|
||||||
|
#define RGMII_RXDELAY_ALIGN BIT(4)
|
||||||
|
#define RGMII_RXDELAY_FORCE_MODE BIT(24)
|
||||||
|
#define RGMII_TXDELAY_FORCE_MODE BIT(24)
|
||||||
|
#define AN8801_RG_PKG_SEL_LSB BIT(4)
|
||||||
|
#define AN8801_RG_PKG_SEL_MSB BIT(5)
|
||||||
|
|
||||||
|
/*
|
||||||
|
*For reference only
|
||||||
|
*/
|
||||||
|
/* User-defined.B */
|
||||||
|
/* Link on(1G/100M/10M), no activity */
|
||||||
|
#define AIR_LED0_ON \
|
||||||
|
(LED_ON_EVT_LINK_1000M | LED_ON_EVT_LINK_100M | LED_ON_EVT_LINK_10M)
|
||||||
|
#define AIR_LED0_BLK (0x0)
|
||||||
|
/* No link on, activity(1G/100M/10M TX/RX) */
|
||||||
|
#define AIR_LED1_ON (0x0)
|
||||||
|
#define AIR_LED1_BLK \
|
||||||
|
(LED_BLK_EVT_1000M_TX | LED_BLK_EVT_1000M_RX | \
|
||||||
|
LED_BLK_EVT_100M_TX | LED_BLK_EVT_100M_RX | \
|
||||||
|
LED_BLK_EVT_10M_TX | LED_BLK_EVT_10M_RX)
|
||||||
|
/* Link on(100M/10M), activity(100M/10M TX/RX) */
|
||||||
|
#define AIR_LED2_ON (LED_ON_EVT_LINK_100M | LED_ON_EVT_LINK_10M)
|
||||||
|
#define AIR_LED2_BLK \
|
||||||
|
(LED_BLK_EVT_100M_TX | LED_BLK_EVT_100M_RX | \
|
||||||
|
LED_BLK_EVT_10M_TX | LED_BLK_EVT_10M_RX)
|
||||||
|
/* User-defined.E */
|
||||||
|
|
||||||
|
/* Invalid data */
|
||||||
|
#define INVALID_DATA 0xffffffff
|
||||||
|
|
||||||
|
#define LED_BLINK_DURATION(f) (UNIT_LED_BLINK_DURATION << (f))
|
||||||
|
#define LED_GPIO_SEL(led, gpio) ((led) << ((gpio) * 3))
|
||||||
|
|
||||||
|
/* Interrupt GPIO number, should not conflict with LED */
|
||||||
|
#define AIR_INTERRUPT_GPIO 3
|
||||||
|
|
||||||
|
/* DATA TYPE DECLARATIONS
|
||||||
|
*/
|
||||||
|
enum AIR_LED_GPIO_PIN_T {
|
||||||
|
AIR_LED_GPIO1 = 1,
|
||||||
|
AIR_LED_GPIO2 = 2,
|
||||||
|
AIR_LED_GPIO3 = 3,
|
||||||
|
AIR_LED_GPIO5 = 5,
|
||||||
|
AIR_LED_GPIO8 = 8,
|
||||||
|
AIR_LED_GPIO9 = 9,
|
||||||
|
};
|
||||||
|
|
||||||
|
enum AIR_LED_T {
|
||||||
|
AIR_LED0 = 0,
|
||||||
|
AIR_LED1,
|
||||||
|
AIR_LED2,
|
||||||
|
AIR_LED3
|
||||||
|
};
|
||||||
|
|
||||||
|
enum AIR_LED_BLK_DUT_T {
|
||||||
|
AIR_LED_BLK_DUR_32M = 0,
|
||||||
|
AIR_LED_BLK_DUR_64M,
|
||||||
|
AIR_LED_BLK_DUR_128M,
|
||||||
|
AIR_LED_BLK_DUR_256M,
|
||||||
|
AIR_LED_BLK_DUR_512M,
|
||||||
|
AIR_LED_BLK_DUR_1024M,
|
||||||
|
AIR_LED_BLK_DUR_LAST
|
||||||
|
};
|
||||||
|
|
||||||
|
enum AIR_LED_POLARITY {
|
||||||
|
AIR_ACTIVE_LOW = 0,
|
||||||
|
AIR_ACTIVE_HIGH,
|
||||||
|
};
|
||||||
|
|
||||||
|
enum AIR_LED_MODE_T {
|
||||||
|
AIR_LED_MODE_DISABLE = 0,
|
||||||
|
AIR_LED_MODE_USER_DEFINE,
|
||||||
|
AIR_LED_MODE_LAST
|
||||||
|
};
|
||||||
|
|
||||||
|
enum AIR_RGMII_DELAY_STEP_T {
|
||||||
|
AIR_RGMII_DELAY_NOSTEP = 0,
|
||||||
|
AIR_RGMII_DELAY_STEP_1 = 1,
|
||||||
|
AIR_RGMII_DELAY_STEP_2 = 2,
|
||||||
|
AIR_RGMII_DELAY_STEP_3 = 3,
|
||||||
|
AIR_RGMII_DELAY_STEP_4 = 4,
|
||||||
|
AIR_RGMII_DELAY_STEP_5 = 5,
|
||||||
|
AIR_RGMII_DELAY_STEP_6 = 6,
|
||||||
|
AIR_RGMII_DELAY_STEP_7 = 7,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct AIR_LED_CFG_T {
|
||||||
|
u16 en;
|
||||||
|
u16 gpio;
|
||||||
|
u16 pol;
|
||||||
|
u16 on_cfg;
|
||||||
|
u16 blk_cfg;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct an8801_priv {
|
||||||
|
struct AIR_LED_CFG_T led_cfg[MAX_LED_SIZE];
|
||||||
|
u32 led_blink_cfg;
|
||||||
|
u8 rxdelay_force;
|
||||||
|
u8 txdelay_force;
|
||||||
|
u16 rxdelay_step;
|
||||||
|
u8 rxdelay_align;
|
||||||
|
u16 txdelay_step;
|
||||||
|
#ifdef AN8801SB_DEBUGFS
|
||||||
|
struct dentry *debugfs_root;
|
||||||
|
#endif
|
||||||
|
int pol;
|
||||||
|
int surge;
|
||||||
|
int sgmii_mode;
|
||||||
|
};
|
||||||
|
|
||||||
|
enum an8801_polarity {
|
||||||
|
AIR_POL_TX_NOR_RX_REV,
|
||||||
|
AIR_POL_TX_REV_RX_REV,
|
||||||
|
AIR_POL_TX_NOR_RX_NOR,
|
||||||
|
AIR_POL_TX_REV_RX_NOR,
|
||||||
|
};
|
||||||
|
|
||||||
|
enum air_surge {
|
||||||
|
AIR_SURGE_0R,
|
||||||
|
AIR_SURGE_5R,
|
||||||
|
AIR_SURGE_LAST = 0xff
|
||||||
|
};
|
||||||
|
|
||||||
|
enum air_sgmii_mode {
|
||||||
|
AIR_SGMII_AN,
|
||||||
|
AIR_SGMII_FORCE,
|
||||||
|
AIR_SGMII_LAST = 0xff
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif /* End of __AN8801_H */
|
||||||
@@ -1,6 +1,7 @@
|
|||||||
CONFIG_64BIT=y
|
CONFIG_64BIT=y
|
||||||
# CONFIG_AHCI_MTK is not set
|
# CONFIG_AHCI_MTK is not set
|
||||||
CONFIG_AIROHA_EN8801SC_PHY=y
|
CONFIG_AIROHA_EN8801SC_PHY=y
|
||||||
|
CONFIG_AIROHA_AN8801_PHY=y
|
||||||
CONFIG_AIR_AN8855_PHY=y
|
CONFIG_AIR_AN8855_PHY=y
|
||||||
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
|
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
|
||||||
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
|
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
|
||||||
|
|||||||
@@ -0,0 +1,92 @@
|
|||||||
|
diff -upr linux-6.6.89/drivers/net/mdio/of_mdio.c /home/build9/seb_working/linux-6.6.89/drivers/net/mdio/of_mdio.c
|
||||||
|
--- a/drivers/net/mdio/of_mdio.c 2025-08-22 14:44:34.467093772 +0800
|
||||||
|
+++ b/drivers/net/mdio/of_mdio.c 2025-08-22 14:39:10.212748831 +0800
|
||||||
|
@@ -145,7 +145,10 @@ static int __of_mdiobus_parse_phys(struc
|
||||||
|
int addr, rc = 0;
|
||||||
|
|
||||||
|
/* Loop over the child nodes and register a phy_device for each phy */
|
||||||
|
+ int an8801=0;
|
||||||
|
for_each_available_child_of_node(np, child) {
|
||||||
|
+ if(an8801==1)break;
|
||||||
|
+
|
||||||
|
if (of_node_name_eq(child, "ethernet-phy-package")) {
|
||||||
|
/* Ignore invalid ethernet-phy-package node */
|
||||||
|
if (!of_find_property(child, "reg", NULL))
|
||||||
|
@@ -166,8 +169,25 @@ static int __of_mdiobus_parse_phys(struc
|
||||||
|
continue;
|
||||||
|
}
|
||||||
|
|
||||||
|
- if (of_mdiobus_child_is_phy(child))
|
||||||
|
+ if (of_mdiobus_child_is_phy(child)) {
|
||||||
|
+ if(addr==30)
|
||||||
|
+ {
|
||||||
|
+ int phy_id ;
|
||||||
|
+
|
||||||
|
+ phy_id = mdiobus_read(mdio, addr, MII_PHYSID1) << 16 ;
|
||||||
|
+ phy_id = phy_id + mdiobus_read(mdio, addr, MII_PHYSID2);
|
||||||
|
+ dev_info(&mdio->dev, "[of_mdio] %s %d addr:%d phy_id:0x%x \n",__func__, __LINE__, addr, phy_id);
|
||||||
|
+
|
||||||
|
+ if (phy_id==0 || phy_id==0x1a750000)
|
||||||
|
+ {
|
||||||
|
+ dev_info(&mdio->dev, "[of_mdio] %s %d continue \n",__func__, __LINE__);
|
||||||
|
+ continue;
|
||||||
|
+ }
|
||||||
|
+ else
|
||||||
|
+ an8801=1;
|
||||||
|
+ }
|
||||||
|
rc = of_mdiobus_register_phy(mdio, child, addr);
|
||||||
|
+ }
|
||||||
|
else
|
||||||
|
rc = of_mdiobus_register_device(mdio, child, addr);
|
||||||
|
|
||||||
|
diff -upr linux-6.6.89/drivers/net/phy/Kconfig /home/build9/seb_working/linux-6.6.89/drivers/net/phy/Kconfig
|
||||||
|
--- a/drivers/net/phy/Kconfig 2025-08-08 17:02:38.023751484 +0800
|
||||||
|
+++ b/drivers/net/phy/Kconfig 2025-08-22 15:01:27.708103066 +0800
|
||||||
|
@@ -142,6 +142,11 @@ endif # RTL8366_SMI
|
||||||
|
|
||||||
|
comment "MII PHY device drivers"
|
||||||
|
|
||||||
|
+config AIROHA_AN8801_PHY
|
||||||
|
+ tristate "Drivers for Airoha AN8801 Gigabit PHYs"
|
||||||
|
+ help
|
||||||
|
+ Currently supports the Airoha AN8801 PHY.
|
||||||
|
+
|
||||||
|
config AIROHA_EN8801SC_PHY
|
||||||
|
tristate "Airoha EN8801SC Gigabit PHY"
|
||||||
|
help
|
||||||
|
diff -upr linux-6.6.89/drivers/net/phy/Makefile /home/build9/seb_working/linux-6.6.89/drivers/net/phy/Makefile
|
||||||
|
--- a/drivers/net/phy/Makefile 2025-08-08 17:02:38.023751484 +0800
|
||||||
|
+++ b/drivers/net/phy/Makefile 2025-08-22 15:02:07.464601732 +0800
|
||||||
|
@@ -49,6 +49,7 @@ obj-y += $(sfp-obj-y) $(sfp-obj-m)
|
||||||
|
|
||||||
|
obj-$(CONFIG_ADIN_PHY) += adin.o
|
||||||
|
obj-$(CONFIG_ADIN1100_PHY) += adin1100.o
|
||||||
|
+obj-$(CONFIG_AIROHA_AN8801_PHY) += an8801.o
|
||||||
|
obj-$(CONFIG_AIROHA_EN8801SC_PHY) += en8801sc.o
|
||||||
|
obj-$(CONFIG_AIR_AN8855_PHY) += air_an8855.o
|
||||||
|
obj-$(CONFIG_AIR_EN8811H_PHY) += air_en8811h.o
|
||||||
|
diff -upr linux-6.6.89/drivers/net/phy/phylink.c /home/build9/seb_working/linux-6.6.89/drivers/net/phy/phylink.c
|
||||||
|
--- a/drivers/net/phy/phylink.c 2025-08-22 14:43:00.994406615 +0800
|
||||||
|
+++ b/drivers/net/phy/phylink.c 2025-08-22 14:39:10.280749309 +0800
|
||||||
|
@@ -2290,7 +2290,20 @@ int phylink_fwnode_phy_connect(struct ph
|
||||||
|
/* We're done with the phy_node handle */
|
||||||
|
fwnode_handle_put(phy_fwnode);
|
||||||
|
if (!phy_dev)
|
||||||
|
- return -ENODEV;
|
||||||
|
+ {
|
||||||
|
+ phylink_info(pl, "[phylink] reload phy-handle2. %s %d\n",__func__, __LINE__);
|
||||||
|
+ phy_fwnode = fwnode_find_reference(fwnode, "phy-handle2", 0);
|
||||||
|
+ if (IS_ERR(phy_fwnode)) {
|
||||||
|
+ if (pl->cfg_link_an_mode == MLO_AN_PHY)
|
||||||
|
+ return -ENODEV;
|
||||||
|
+ return 0;
|
||||||
|
+ }
|
||||||
|
+ phy_dev = fwnode_phy_find_device(phy_fwnode);
|
||||||
|
+ fwnode_handle_put(phy_fwnode);
|
||||||
|
+
|
||||||
|
+ if (!phy_dev)
|
||||||
|
+ return -ENODEV;
|
||||||
|
+ }
|
||||||
|
|
||||||
|
/* Use PHY device/driver interface */
|
||||||
|
if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
|
||||||
Reference in New Issue
Block a user