WIFI-14456 CIG WiFi7 WF-189W/H bring up

Signed-off-by: Ken <xshi@actiontec.com>

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -14,6 +14,9 @@ sercomm,ap72tip)
 sonicfi,rap7110c-341x)
 	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
+cig,wf189w)
+	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
+	;;
 esac
 
 board_config_flush

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -22,10 +22,7 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
 	cig,wf189w)
-		ucidef_add_switch "switch1"
+		ucidef_add_switch "switch1" "5u@eth0" "3:lan" "2:lan" "1:lan" "4:wan" "0u@eth1"
-		ucidef_add_switch_attr "switch1" "enable" "false"
-		ucidef_add_switch_attr "switch1" "reset" "false"
-		ucidef_add_switch "switch1" "5u@eth0" "1:lan" "2:lan" "3:lan" "4:wan" "0u@eth1"
 		;;
 	esac
 }

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts

@@ -166,6 +166,10 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -254,28 +258,28 @@
 			};
 		};
 
-		leds {
+		pwmleds {
-			compatible = "gpio-leds";
+			compatible = "pwm-leds";
-			pinctrl-0 = <&gpio_leds_default>;
-			pinctrl-names = "default";
 
-      			led@29 {
+			red {
-				label = "led_r";
+				label = "pwm:red";
-				gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+				pwms = <&pwm 3 1250000>;
-				linux,default-trigger = "led_r";
+				max-brightness = <160>;
-				default-state = "off";
+				linux,default-trigger = "none";
 			};
-			led@30 {
+
-				label = "led_g";
+			green {
-				gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+				label = "pwm:green";
-				linux,default-trigger = "led_g";
+				pwms = <&pwm 2 1250000>;
-				default-state = "off";
+				max-brightness = <160>;
+				linux,default-trigger = "none";
 			};
-			led@31 {
+
-				label = "led_b";
+			led_power: blue {
-				gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+				label = "pwm:blue";
-				linux,default-trigger = "led_b";
+				pwms = <&pwm 1 1250000>;
-				default-state = "off";
+				max-brightness = <160>;
+				linux,default-trigger = "none";
 			};
 		};
 
@@ -644,6 +648,27 @@
 		};
 	};
 
+	pwm_pins: pwm_pinmux {
+		/* PWM LED GREEN */
+		mux_1 {
+			pins = "gpio30";
+			function = "pwm1";
+			drive-strength = <8>;
+		};
+		/* PWM LED BLUE */
+		mux_2 {
+			pins = "gpio31";
+			function = "pwm1";
+			drive-strength = <8>;
+		};
+		/* PWM LED RED */
+		mux_3 {
+			pins = "gpio29";
+			function = "pwm1";
+			drive-strength = <8>;
+		};
+	};
+
 	serial_1_pins: serial1-pinmux {
 		pins = "gpio33", "gpio34", "gpio35", "gpio36";
 		function = "blsp1_uart2";
@@ -651,26 +676,6 @@
 		bias-pull-up;
 	};
 
-	gpio_leds_default: gpio-leds-default-state {
-		led_r {
-			pins = "gpio29";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_g {
-			pins = "gpio30";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_b {
-			pins = "gpio31";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
 
 	button_pins: button-state {
 		pins = "gpio21";
@@ -713,15 +718,11 @@
 	status = "okay";
 };
 
-&usb3 {
+&pwm {
-	qcom,select-utmi-as-pipe-clk;
+        pinctrl-0 = <&pwm_pins>;
+        used-pwm-indices = <1>, <1>, <0>, <1>;
+        pinctrl-names = "default";
         status = "okay";
-
-	dwc3@8a00000 {
-		/delete-property/ #phy-cells;
-		/delete-property/ phys;
-		/delete-property/ phy-names;
-	};
 };
 
 &hs_m31phy_0 {

feeds/qca-wifi-7/qca-ssdk-qca/patches/0005-qca-ssdk-Fix-QCA8385-Maximum-support-for-4096-VLAN-s.patch

@@ -0,0 +1,25 @@
+From 41861d8524e61b1c350f00c67e0ca8534b73d033 Mon Sep 17 00:00:00 2001
+From: huangyunxiang <huangyunxiang@cigtech.com>
+Date: Wed, 9 Apr 2025 10:03:52 +0800
+Subject: [PATCH] qca-ssdk:Fix QCA8385 Maximum support for 4096 VLAN settings
+
+---
+ include/init/ssdk_plat.h                                    | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/init/ssdk_plat.h b/init/ssdk_plat.h
+index 414918a5bd..92596477af 100644
+--- a/include/init/ssdk_plat.h
++++ b/include/init/ssdk_plat.h
+@@ -174,7 +174,7 @@
+ #define AR8327_NUM_PHYS                              5
+ #define AR8327_PORT_CPU                              0
+ #define AR8327_NUM_PORTS                             7
+-#define AR8327_MAX_VLANS                             128
++#define AR8327_MAX_VLANS                             4096
+ 
+ #define MII_PHYADDR_C45                              (1<<30)
+ 
+-- 
+2.34.1
+

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,9 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=2d824a49bcb7e62f99061d201e8745124ee733f2473bd2c569fb69dfcdf6ab47
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2025-01-27
-PKG_SOURCE_VERSION:=0683d041e48c0057f4b2d4fbeeebb6f475b6ecad
+PKG_SOURCE_VERSION:=e88d964280e03d543eb7d16e4762d43794da7637
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause