diff --git a/feeds/ipq807x_v5.4/ath11k-wifi/Makefile b/feeds/ipq807x_v5.4/ath11k-wifi/Makefile index 439830621..532a14d9c 100755 --- a/feeds/ipq807x_v5.4/ath11k-wifi/Makefile +++ b/feeds/ipq807x_v5.4/ath11k-wifi/Makefile @@ -50,6 +50,7 @@ ALLWIFIBOARDS:= \ indio-um-325ax-v2 \ indio-um-335ax \ indio-um-525axp \ + indio-um-525axm \ muxi-ap3220l \ plasmacloud-pax1800 \ wallys-dr5018 \ @@ -447,6 +448,7 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1 $(eval $(call generate-ath11k-wifi-package,indio-um-325ax-v2,Indio UM-325AX V2)) $(eval $(call generate-ath11k-wifi-package,indio-um-335ax,Indio UM-335AX)) $(eval $(call generate-ath11k-wifi-package,indio-um-525axp,Indio UM-525AXP)) +$(eval $(call generate-ath11k-wifi-package,indio-um-525axm,Indio UM-525AXM)) $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G)) $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G)) $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G)) diff --git a/feeds/ipq807x_v5.4/ath11k-wifi/board-indio-um-525axm.bin.IPQ5018 b/feeds/ipq807x_v5.4/ath11k-wifi/board-indio-um-525axm.bin.IPQ5018 new file mode 100755 index 000000000..dcbe27fe0 Binary files /dev/null and b/feeds/ipq807x_v5.4/ath11k-wifi/board-indio-um-525axm.bin.IPQ5018 differ diff --git a/feeds/ipq807x_v5.4/ath11k-wifi/board-indio-um-525axm.bin.QCN6122 b/feeds/ipq807x_v5.4/ath11k-wifi/board-indio-um-525axm.bin.QCN6122 new file mode 100755 index 000000000..bd2ebed98 Binary files /dev/null and b/feeds/ipq807x_v5.4/ath11k-wifi/board-indio-um-525axm.bin.QCN6122 differ diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds index 09ff6b056..8fede3554 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds @@ -18,6 +18,7 @@ edgecore,eap104) ;; indio,um-325ax-v2|\ indio,um-335ax|\ +indio,um-525axm|\ indio,um-525axp) ucidef_set_led_wlan "wlan2g" "WLAN2G" "led_2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "led_5g" "phy1tpt" diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network index 53ebf3b36..efe1eb840 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network @@ -50,6 +50,7 @@ qcom_setup_interfaces() ;; indio,um-325ax-v2|\ indio,um-335ax|\ + indio,um-525axm|\ indio,um-525axp) ucidef_set_interface_wan "eth1" ucidef_set_interface_lan "eth0" diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata index 74bbeb470..3a2110e34 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata @@ -144,6 +144,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin) hfcl,ion4xi_w|\ indio,um-325ax-v2|\ indio,um-335ax|\ + indio,um-525axm|\ indio,um-525axp|\ optimcloud,d60|\ optimcloud,d60-5g|\ @@ -187,6 +188,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin) ath11k/qcn6122/hw1.0/caldata_2.bin) case "$board" in indio,um-325ax-v2|\ + indio,um-525axm|\ indio,um-525axp|\ wallys,dr5018|\ edgecore,eap104|\ @@ -242,6 +244,7 @@ ath11k-macs) edgecore,oap101e-6e|\ indio,um-325ax-v2|\ indio,um-525axp|\ + indio,um-525axm|\ optimcloud,d60|\ optimcloud,d60-5g|\ optimcloud,d50|\ diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh b/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh index b4d83838b..ca37ad2cc 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh +++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh @@ -84,6 +84,7 @@ platform_check_image() { indio,um-325ax-v2|\ indio,um-335ax|\ indio,um-525axp|\ + indio,um-525axm|\ optimcloud,d60|\ optimcloud,d60-5g|\ optimcloud,d50|\ @@ -113,6 +114,7 @@ platform_do_upgrade() { indio,um-325ax-v2|\ indio,um-335ax|\ indio,um-525axp|\ + indio,um-525axm|\ edgecore,oap101|\ edgecore,oap101-6e|\ edgecore,oap101e|\ diff --git a/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-indio-um-525axm.dts b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-indio-um-525axm.dts new file mode 100644 index 000000000..ce5740073 --- /dev/null +++ b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-indio-um-525axm.dts @@ -0,0 +1,941 @@ +/dts-v1/; +/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ipq5018.dtsi" +#include + +/ { + #address-cells = <0x2>; + #size-cells = <0x2>; + model = "Indio UM-525AXM"; + compatible = "indio,um-525axm", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018"; + interrupt-parent = <&intc>; + + aliases { + sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + ethernet0 = "/soc/dp1"; + ethernet1 = "/soc/dp2"; + //led-failsafe = &led_red; + //led-running = &led_green; + //led-upgrade = &led_green; + //led-gateway = &led_blue; + //led-factory = &led_blue; + }; + + chosen { + bootargs = "console=ttyMSM0,115200,n8 rw init=/init"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + bootargs-append = " swiotlb=1"; + #else + bootargs-append = " swiotlb=1 coherent_pool=2M"; + #endif + stdout-path = "serial0"; + }; + + reserved-memory { + #ifdef __IPQ_MEM_PROFILE_256_MB__ + /* 256 MB Profile + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 8MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x40800000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 13MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D100000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D300000 | 15MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E300000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4E400000 | 15MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4F300000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4F400000 | 1MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x4500000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x1400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xD00000>; + }; + + m3_dump: m3_dump@4D100000 { + no-map; + reg = <0x0 0x4D100000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0xF00000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 { + no-map; + reg = <0x0 0x4E200000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 { + no-map; + reg = <0x0 0x4E300000 0x0 0x100000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E400000 { + no-map; + reg = <0x0 0x4E400000 0x0 0xF00000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 { + no-map; + reg = <0x0 0x4F300000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 { + no-map; + reg = <0x0 0x4F400000 0x0 0x100000>; + }; + + #else + /* 512MB/1GB Profiles + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 16MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x41000000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 14MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D300000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | Caldb | 0x4D400000 | 2MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D600000 | 16MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E600000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E700000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | Caldb | 0x4E800000 | 5MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4ED00000 | 16MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4FD00000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4FE00000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | Caldb | 0x4FF00000 | 5MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x5400000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 01400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xE00000>; + }; + + m3_dump: m3_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0x100000>; + }; + + q6_caldb_region: q6_caldb_region@4D400000 { + no-map; + reg = <0x0 0x4D400000 0x0 0x200000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D600000 { + no-map; + reg = <0x0 0x4D600000 0x0 0x1000000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 { + no-map; + reg = <0x0 0x4E600000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 { + no-map; + reg = <0x0 0x4E700000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 { + no-map; + reg = <0x0 0x4E800000 0x0 0x500000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E900000 { + no-map; + reg = <0x0 0x4ED00000 0x0 0x1000000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 { + no-map; + reg = <0x0 0x4FD00000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 { + no-map; + reg = <0x0 0x4FE00000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 { + no-map; + reg = <0x0 0x4FF00000 0x0 0x500000>; + }; + + #endif + }; + + soc { + gpio-watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + hw_margin_ms = <5000>; + always-running; + }; + + serial@78af000 { + status = "ok"; + }; + + blsp1_uart2: serial@78b0000 { + pinctrl-0 = <&blsp1_uart_pins>; + pinctrl-names = "default"; + }; + + qpic_bam: dma@7984000{ + status = "ok"; + }; + + nand: qpic-nand@79b0000 { + pinctrl-0 = <&qspi_nand_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + spi_0: spi@78b5000 { /* BLSP1 QUP0 */ + pinctrl-0 = <&blsp0_spi_pins>; + pinctrl-names = "default"; + cs-select = <0>; + status = "ok"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + linux,modalias = "m25p80", "n25q128a11"; + spi-max-frequency = <50000000>; + use-default-sizes; + }; + }; + + mdio0: mdio@88000 { + status = "ok"; + + ethernet-phy@0 { + reg = <7>; + }; + }; + + mdio1: mdio@90000 { + status = "ok"; + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + phy-reset-gpio = <&tlmm 39 0>; + + ethernet-phy@0 { + reg = <28>; + }; + }; + + ess-instance { + num_devices = <0x1>; + ess-switch@0x39c00000 { + switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/ + cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/ + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <7>; + mdiobus = <&mdio0>; + }; + port@1 { + port_id = <2>; + phy_address = <0x1c>; + mdiobus = <&mdio1>; + port_mac_sel = "QGMAC_PORT"; + }; + }; + led_source@0 { + source = <0>; + mode = "normal"; + speed = "all"; + blink_en = "enable"; + active = "high"; + }; + }; + ess-switch1@1 { + compatible = "qcom,ess-switch-qca83xx"; + device_id = <1>; + switch_access_mode = "mdio"; + mdio-bus = <&mdio1>; + reset_gpio = <0x28>; + switch_cpu_bmp = <0x40>; /* cpu port bitmap */ + switch_lan_bmp = <0x1e>; /* lan port bitmap */ + switch_wan_bmp = <0x0>; /* wan port bitmap */ + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x00010 0x2613a0 /* PORT6 FORCE MODE*/ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <28>; + }; + }; + }; + }; + + dp1 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <1>; + reg = <0x39C00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + qcom,link-poll = <1>; + qcom,phy-mdio-addr = <7>; + mdio-bus = <&mdio0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + }; + + dp2 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <2>; + reg = <0x39D00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + qcom,link-poll = <1>; + qcom,phy-mdio-addr = <28>; + mdio-bus = <&mdio1>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + }; + + qcom,test@0 { + status = "ok"; + }; + + nss-macsec1 { + compatible = "qcom,nss-macsec"; + phy_addr = <0x1c>; + mdiobus = <&mdio1>; + }; + + lpass: lpass@0xA000000{ + status = "disabled"; + }; + + pcm: pcm@0xA3C0000{ + pinctrl-0 = <&audio_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + pcm_lb: pcm_lb@0 { + status = "disabled"; + }; + }; + + thermal-zones { + status = "ok"; + }; + +}; + +&tlmm { + pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>; + pinctrl-names = "default"; + + blsp0_uart_pins: uart_pins { + blsp0_uart_rx_tx { + pins = "gpio20", "gpio21"; + function = "blsp0_uart0"; + bias-disable; + }; + }; + + blsp1_uart_pins: blsp1_uart_pins { + blsp1_uart_rx_tx { + pins = "gpio22", "gpio24", "gpio23", "gpio25"; + function = "blsp1_uart2"; + bias-disable; + }; + }; + + blsp0_spi_pins: blsp0_spi_pins { + mux { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-disable; + }; + }; + + qspi_nand_pins: qspi_nand_pins { + qspi_clock { + pins = "gpio9"; + function = "qspi_clk"; + drive-strength = <8>; + bias-disable; + }; + qspi_cs { + pins = "gpio8"; + function = "qspi_cs"; + drive-strength = <8>; + bias-disable; + }; + qspi_data_0 { + pins = "gpio7"; + function = "qspi0"; + drive-strength = <8>; + bias-disable; + }; + qspi_data_1 { + pins = "gpio6"; + function = "qspi1"; + drive-strength = <8>; + bias-disable; + }; + qspi_data_2 { + pins = "gpio5"; + function = "qspi2"; + drive-strength = <8>; + bias-disable; + }; + qspi_data_3 { + pins = "gpio4"; + function = "qspi3"; + drive-strength = <8>; + bias-disable; + }; + }; + + mdio1_pins: mdio_pinmux { + mux_0 { + pins = "gpio36"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mux_1 { + pins = "gpio37"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + phy_led_pins: phy_led_pins { + gephy_led_pin { + pins = "gpio46"; + function = "led0"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + i2c_pins: i2c_pins { + i2c_scl { + pins = "gpio25"; + function = "blsp2_i2c1"; + drive-strength = <8>; + bias-disable; + }; + + i2c_sda { + pins = "gpio26"; + function = "blsp2_i2c1"; + drive-strength = <8>; + bias-disable; + }; + }; + + button_pins: button_pins { + reset_button { + pins = "gpio38"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + }; +audio_pins: audio_pinmux { +}; + leds_pins: leds_pins { + led_5g { + pins = "gpio34"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + led_2g { + pins = "gpio33"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + led_sys { + pins = "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + led_onekey { + pins = "gpio28"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&soc { + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = ; + gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led_blue: led@34 { + label = "led_5g"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,default-trigger = "led_5g"; + default-state = "off"; + }; + led_green: led@33 { + label = "led_2g"; + gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + linux,default-trigger = "led_2g"; + default-state = "off"; + }; + led_red: led@26 { + label = "led_sys"; + gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; + linux,default-trigger = "led_sys"; + default-state = "off"; + }; + led@28 { + label = "led_onekey"; + gpios = <&tlmm 28 GPIO_ACTIVE_LOW>; + linux,default-trigger = "led_onekey"; + default-state = "off"; + }; + }; +}; + +&q6v5_wcss { + compatible = "qcom,ipq5018-q6-mpd"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + firmware = "IPQ5018/q6_fw.mdt"; + reg = <0x0cd00000 0x4040>, + <0x1938000 0x8>, + <0x193d204 0x4>; + reg-names = "qdsp6", + "tcsr-msip", + "tcsr-q6"; + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_Q6_BCR>; + + reset-names = "wcss_aon_reset", + "wcss_q6_reset"; + + clocks = <&gcc GCC_Q6_AXIS_CLK>, + <&gcc GCC_WCSS_ECAHB_CLK>, + <&gcc GCC_Q6_AXIM_CLK>, + <&gcc GCC_Q6_AXIM2_CLK>, + <&gcc GCC_Q6_AHB_CLK>, + <&gcc GCC_Q6_AHB_S_CLK>, + <&gcc GCC_WCSS_AXI_S_CLK>; + clock-names = "gcc_q6_axis_clk", + "gcc_wcss_ecahb_clk", + "gcc_q6_axim_clk", + "gcc_q6_axim2_clk", + "gcc_q6_ahb_clk", + "gcc_q6_ahb_s_clk", + "gcc_wcss_axi_s_clk"; + + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_mem_regions>, <&q6_etr_region>; + #else + memory-region = <&q6_mem_regions>, <&q6_etr_region>, + <&q6_caldb_region>; + #endif + + qcom,rproc = <&q6v5_wcss>; + qcom,bootargs_smem = <507>; + boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>, + <0x2 0x4 0x2 0x12 0x0 0x0>; + status = "ok"; + q6_wcss_pd1: remoteproc_pd1@4ab000 { + compatible = "qcom,ipq5018-wcss-ahb-mpd"; + reg = <0x4ab000 0x20>; + reg-names = "rmb"; + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "IPQ5018/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 8 0>, + <&wcss_smp2p_in 9 0>, + <&wcss_smp2p_in 12 0>, + <&wcss_smp2p_in 11 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_BCR>, + <&gcc GCC_CE_BCR>; + reset-names = "wcss_aon_reset", + "wcss_reset", + "ce_reset"; + + clocks = <&gcc GCC_WCSS_AHB_S_CLK>, + <&gcc GCC_WCSS_ACMT_CLK>, + <&gcc GCC_WCSS_AXI_M_CLK>; + clock-names = "gcc_wcss_ahb_s_clk", + "gcc_wcss_acmt_clk", + "gcc_wcss_axi_m_clk"; + + qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>; + + qcom,smem-states = <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>; + #else + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>, <&q6_caldb_region>; + #endif + + }; + + q6_wcss_pd2: remoteproc_pd2 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "qcn6122/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 16 0>, + <&wcss_smp2p_in 17 0>, + <&wcss_smp2p_in 20 0>, + <&wcss_smp2p_in 19 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 16>, + <&wcss_smp2p_out 17>, + <&wcss_smp2p_out 18>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>; + #else + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>; + #endif + + }; + + q6_wcss_pd3: remoteproc_pd3 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + firmware = "IPQ5018/q6_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 24 0>, + <&wcss_smp2p_in 25 0>, + <&wcss_smp2p_in 28 0>, + <&wcss_smp2p_in 27 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 24>, + <&wcss_smp2p_out 25>, + <&wcss_smp2p_out 26>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>; + #else + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>; + #endif + }; +}; + +&i2c_0 { + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&wifi0 { + /* IPQ5018 */ + qcom,multipd_arch; + qcom,rproc = <&q6_wcss_pd1>; + qcom,userpd-subsys-name = "q6v5_wcss_userpd1"; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x24>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>; + qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>; + qcom,caldb-size = <0x200000>; + mem-region = <&q6_ipq5018_data>; +#else + memory-region = <&q6_ipq5018_data>; +#endif + status = "ok"; +}; + +&wifi1 { + /* QCN6122 5G */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd2"; + qcom,rproc = <&q6_wcss_pd2>; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x50>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>; + qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>; + qcom,caldb-size = <0x500000>; + mem-region = <&q6_qcn6122_data1>; +#else + memory-region = <&q6_qcn6122_data1>; +#endif + status = "disabled"; +}; + +&wifi2 { + /* QCN6122 6G */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd3"; + qcom,rproc = <&q6_wcss_pd3>; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0xb0>; +#ifdef __CNSS2__ + qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>; + qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>; + qcom,caldb-size = <0x500000>; + mem-region = <&q6_qcn6122_data2>; +#else + memory-region = <&q6_qcn6122_data2>; +#endif + status = "ok"; +}; + + +&usb3 { + status = "ok"; + device-power-gpio = <&tlmm 24 1>; +}; + +&dwc_0 { + /delete-property/ #phy-cells; + /delete-property/ phys; + /delete-property/ phy-names; +}; +&hs_m31phy_0 { + status = "ok"; +}; + +&eud { + status = "ok"; +}; + +&pcie_x1 { + #status = "disabled"; + #perst-gpio = <&tlmm 18 1>; + perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>; +}; + +&pcie_x2 { + #status = "disabled"; + #perst-gpio = <&tlmm 15 1>; + perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>; +}; + +&pcie_x1_rp { + status = "disabled"; + + mhi_0: qcom,mhi@0 { + reg = <0 0 0 0 0 >; + }; +}; + +&pcie_x2_rp { + status = "disabled"; + + mhi_1: qcom,mhi@1 { + reg = <0 0 0 0 0 >; + + }; +}; + diff --git a/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk b/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk index afbfe0b5b..ee1736d84 100755 --- a/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk +++ b/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk @@ -120,6 +120,15 @@ define Device/indio_um-525axp endef TARGET_DEVICES += indio_um-525axp +define Device/indio_um-525axm + DEVICE_TITLE := Indio UM-525axm + DEVICE_DTS := qcom-ipq5018-indio-um-525axm + SUPPORTED_DEVICES := indio,um-525axm + DEVICE_PACKAGES := ath11k-wifi-indio-um-525axm ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122 + DEVICE_DTS_CONFIG := config@mp03.5-c1 +endef +TARGET_DEVICES += indio_um-525axm + define Device/udaya_a6_id2 DEVICE_TITLE := Udaya A6 - ID2 DEVICE_DTS := qcom-ipq5018-udaya-a6-id2 diff --git a/profiles/indio_um-525axm.yml b/profiles/indio_um-525axm.yml new file mode 100644 index 000000000..b9d918ba4 --- /dev/null +++ b/profiles/indio_um-525axm.yml @@ -0,0 +1,17 @@ +--- +profile: indio_um-525axm +target: ipq50xx +subtarget: generic +description: Build image for the Indio um-525axm +image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-indio_um-525axm-squashfs-sysupgrade.tar +feeds: + - name: ipq807x + path: ../../feeds/ipq807x_v5.4 +include: + - ucentral-ap +packages: + - ipq50xx +diffconfig: | + CONFIG_KERNEL_IPQ_MEM_PROFILE=512 + CONFIG_BUSYBOX_CUSTOM=y + CONFIG_BUSYBOX_CONFIG_STTY=y