diff --git a/.github/workflows/build-dev.yml b/.github/workflows/build-dev.yml
index b2b6d53c4..781d2e995 100644
--- a/.github/workflows/build-dev.yml
+++ b/.github/workflows/build-dev.yml
@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf189', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap111', 'edgecore_ecw5211', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'sercomm_ap72tip', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018-v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf189', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap111', 'edgecore_ecw5211', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'sercomm_ap72tip', 'udaya_a5-id2', 'udaya_a6-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018-v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
 
     steps:
     - uses: actions/checkout@v3
diff --git a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network
index f408e6737..941aabce1 100755
--- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network
+++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network
@@ -25,7 +25,10 @@ qcom_setup_interfaces()
 	cybertan,eww631-b1)
 		ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6@eth0"
 		;;
-	udaya,a6-id2|\
+	udaya,a6-id2)
+		ucidef_set_interface_wan "eth1"
+		ucidef_set_interface_lan "eth0"
+		;;
 	edgecore,oap101|\
  	edgecore,oap101-6e|\
 	edgecore,oap101e|\
diff --git a/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-udaya-a6-id2.dts b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-udaya-a6-id2.dts
index e5f0faa86..a9262f816 100755
--- a/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-udaya-a6-id2.dts
+++ b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-udaya-a6-id2.dts
@@ -31,6 +31,11 @@
 		serial1 = &blsp1_uart2;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -415,6 +420,31 @@
 			pinctrl-names = "default";
 		};
 
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+
+			wps {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led_power: led@30 {
+				label = "green:power";
+				gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+				default-state = "on";
+			};
+		};
 	};
 
 	qcom,test@0 {
@@ -528,6 +558,15 @@
 		};
 	};
 
+	leds_pins: leds_pins {
+		led_status {
+			pins = "gpio30";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
 	audio_pins: audio_pinmux {
 		mux_1 {
 			pins = "gpio24";