Merge pull request #506 from Telecominfraproject/v2.8.0-rc2

V2.8.0 rc2

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf196', 'cig_wf610d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm' ]
+        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf196', 'cig_wf610d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650' ]
 
     steps:
     - uses: actions/checkout@v3

feeds/ipq807x/ipq807x/base-files/etc/board.d/01_leds

@@ -50,6 +50,7 @@ glinet,ax1800|\
 glinet,axt1800)
 	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
 	;;
+yuncore,fap650|\
 muxi,ap3220l)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -59,6 +59,10 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
+	yuncore,fap650)
+		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
+		ucidef_set_interface_wan "eth4"
+		;;
 	qcom,ipq807x-hk14)
 		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 		ucidef_set_interface_wan "eth4"

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -116,6 +116,7 @@ case "$FIRMWARE" in
 	xiaomi,ax1800|\
 	glinet,ax1800|\
 	yuncore,ax840|\
+	yuncore,fap650|\
 	plasmacloud,pax1800-v1|\
 	plasmacloud,pax1800-v2)
                 caldata_extract "0:ART" 0x1000 0x20000  

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-yuncore-fap650.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-yuncore-fap650.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-yuncore-fap650.dts

@@ -0,0 +1,423 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP03-C1";
+	compatible = "yuncore,fap650", "qcom,ipq6018-cp03", "qcom,ipq6018";
+	interrupt-parent = <&intc>;
+	qcom,msm-id = <0x1A5 0x0>;
+
+	aliases {
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		ethernet2 = "/soc/dp3";
+		ethernet3 = "/soc/dp4";
+		ethernet4 = "/soc/dp5";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+#endif
+	};
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		qpic_pad {
+			pins = "gpio1", "gpio3", "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_sys {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_5g {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_2g {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+		};
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x1e>; /* lan port bitmap */
+		switch_wan_bmp = <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@3 {
+				port_id = <3>;
+				phy_address = <4>;
+			};
+			port@4 {
+				port_id = <4>;
+				phy_address = <3>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <1>;
+		reg = <0x3a001000 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <0>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <2>;
+		reg = <0x3a001200 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <1>;
+		phy-mode = "sgmii";
+	};
+
+	dp3 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <2>;
+		phy-mode = "sgmii";
+	};
+
+	dp4 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <3>;
+		phy-mode = "sgmii";
+	};
+
+	dp5 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <5>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_power: led@32 {
+			label = "green:power";
+			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led@35 {
+			label = "green:wifi5";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@37 {
+			label = "green:wifi2";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif

feeds/ipq807x/ipq807x/image/ipq60xx.mk

@@ -185,3 +185,13 @@ define Device/meshpp_s618_cp01
   DEVICE_PACKAGES := ath11k-wifi-meshpp-s618 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
 endef
 TARGET_DEVICES += meshpp_s618_cp01
+
+define Device/yuncore_fap650
+  DEVICE_TITLE := YunCore FAP 650
+  DEVICE_DTS := qcom-ipq6018-yuncore-fap650
+  SUPPORTED_DEVICES := yuncore,fap650
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  DEVICE_PACKAGES := ath11k-wifi-yuncore-fap650
+endef
+TARGET_DEVICES += yuncore_fap650
+

feeds/ucentral/ucentral-schema/Makefile

@@ -4,9 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
+PKG_MIRROR_HASH:=8820ade9a13093dfab1178b3049db734d87e5ae0d509cd5248b0858277b0c8fe
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2022-05-29
-PKG_SOURCE_VERSION:=084fa1a01d0acbdd8fc8e110b9519efb6e32ee8f
+PKG_SOURCE_VERSION:=f3c99724dc985ed08834b5fa04bee696b0fccf0b
 
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause

feeds/wifi-ax/ath11k-wifi/Makefile

@@ -47,6 +47,7 @@ ALLWIFIBOARDS:= \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
+	yuncore-fap650 \
 	meshpp-s618
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ath11k-wifi-$(BOARD))
@@ -254,6 +255,7 @@ $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))
 $(eval $(call generate-ath11k-wifi-package,meshpp-s618,Mesh++ S618))
 $(eval $(call generate-ath11k-wifi-package,muxi-ap3220l,MUXI AP3220L))
+$(eval $(call generate-ath11k-wifi-package,yuncore-fap650,YunCore FAP650))
 
 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq5018))

patches/ipq807x/0004-ipq807x-add-the-Qualcomm-AX-target-support.patch

@@ -1,16 +1,16 @@
-From 1749748819caa03e249e8a5df1311498550cbd3b Mon Sep 17 00:00:00 2001
+From c931a11e400ddf501f6796c62ba512195a1561ce Mon Sep 17 00:00:00 2001
 From: John Crispin <john@phrozen.org>
 Date: Sat, 18 Jul 2020 08:53:44 +0200
-Subject: [PATCH 68/83] ipq807x: add the Qualcomm AX target support
+Subject: [PATCH] ipq807x: add the Qualcomm AX target support
 
 Signed-off-by: John Crispin <john@phrozen.org>
 ---
  config/Config-kernel.in                   |  9 ++++++
  include/image.mk                          |  6 +++-
  include/kernel-version.mk                 |  2 +-
+ package/boot/uboot-envtools/Makefile      |  5 ---
  package/boot/uboot-envtools/files/ipq807x | 37 +++++++++++++++++++++++
- toolchain/kernel-headers/Makefile         |  8 +++++
+ 5 files changed, 52 insertions(+), 7 deletions(-)
- 5 files changed, 60 insertions(+), 2 deletions(-)
  create mode 100644 package/boot/uboot-envtools/files/ipq807x
 
 diff --git a/config/Config-kernel.in b/config/Config-kernel.in
@@ -70,13 +70,29 @@ index c7aba61cd7..efecf2f919 100644
  LINUX_KERNEL_HASH-4.14.193 = 0b0fb41d4430e1a42738b341cbfd2f41951aa5cd02acabbd53f076119c8b9f03
  LINUX_KERNEL_HASH-5.4.158 = 6e018fecdc8fc24553756e582d83b82d65b10a6b03ef36262a24911f839b8d59
  LINUX_KERNEL_HASH-5.10.27 = d99dc9662951299c53a0a8d8c8d0a72a16ff861d20e927c0f9b14f63282d69d9
+diff --git a/package/boot/uboot-envtools/Makefile b/package/boot/uboot-envtools/Makefile
+index a9eccec0ce..0696c81bea 100644
+--- a/package/boot/uboot-envtools/Makefile
++++ b/package/boot/uboot-envtools/Makefile
+@@ -58,11 +58,6 @@ MAKE_FLAGS += \
+ 	no-dot-config-targets=envtools \
+ 	envtools
+ 
+-define Package/uboot-envtools/conffiles
+-/etc/config/ubootenv
+-/etc/fw_env.config
+-endef
+-
+ define Package/uboot-envtools/install
+ 	$(INSTALL_DIR) $(1)/usr/sbin
+ 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tools/env/fw_printenv $(1)/usr/sbin
 diff --git a/package/boot/uboot-envtools/files/ipq807x b/package/boot/uboot-envtools/files/ipq807x
 new file mode 100644
-index 0000000000..6c429f1852
+index 0000000000..84ed73f288
 --- /dev/null
 +++ b/package/boot/uboot-envtools/files/ipq807x
 @@ -0,0 +1,37 @@
-+[ -e /etc/config/ubootenv ] && exit 0
++[ -e /etc/config/ubootenv ] && rm /etc/config/ubootenv
 +
 +touch /etc/config/ubootenv
 +

patches/ramips/0017-ramips-add-support-for-YunCore-FAP640.patch

@@ -0,0 +1,301 @@
+From dbd1fbf93aa42f4bd69ec6af4c4741229f5d7005 Mon Sep 17 00:00:00 2001
+From: Volodymyr Puiul <volodymyr.puiul@gmail.com>
+Date: Thu, 8 Dec 2022 15:20:40 +0100
+Subject: [PATCH] ramips: add support for YunCore FAP640
+
+It is an in-wall 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A.
+
+Specifications:
+- SoC: MT7621AT (880MHz, 2 Cores)
+- RAM: 128 MB
+- Flash: 16 MB SPI
+- Wi-Fi:
+    - MT7915DN + MT7905DAN: 2.4/5 GHz
+- Ethernet: 5x1GiE via MT7530, 1xWAN with POE and 4xLAN
+- UART: J4 (115200 baud)
+    - Pinout: [3V3] (TXD) (RXD) (GND)
+- Power: 802.11af/at PoE;
+
+- Bootloader: U-Boot
+- Buttons:
+    - Reset
+- LEDs:
+    - Status - RGB controlled by
+      - GPIO 14 LOW - green color
+      - GPIO 15 LOW- red color
+      - GPIO 16 LOW - blue color
+    - WAN - gren color, controlled by switch GPIO 12 LOW
+    - LAN1 - gren color, controlled by switch GPIO 9 HIGH
+    - LAN2 - gren color, controlled by switch GPIO 6 LOW
+    - LAN3 - gren color, controlled by switch GPIO 3 LOW
+    - LAN4 - gren color, controlled by switch GPIO 0 LOW
+
+Installation:
+OEM firmware is based on LEDE with custom UI and support standard sysupgrade
+variant of firmware. However it requires "*.ubin" extension for sysupgrade file.
+Always select "Factory reset" switch on upgrade to OpenWRT, otherwise
+router will not boot.
+
+MAC addresses with OEM firmware:
+vendor   source
+lan      factory 0x4 (label)
+5g       factory 0x4 (label)
+2g       label with flipped bits bit in 1-st byte and bits 5, 6, 7 in
+  4-th byte
+
+Example
+label:  44:xx:xx:b7:xx:xx
+lan:    44:xx:xx:b7:xx:xx
+2g      46:xx:xx:c7:xx:xx
+5g      44:xx:xx:b7:xx:xx
+
+Signed-off-by: Volodymyr Puiul <volodymyr.puiul@gmail.com>
+---
+ .../ramips/dts/mt7621_yuncore_fap640.dts      | 198 ++++++++++++++++++
+ target/linux/ramips/image/mt7621.mk           |  10 +
+ .../etc/hotplug.d/ieee80211/10_fix_wifi_mac   |   5 +
+ 3 files changed, 213 insertions(+)
+ create mode 100644 target/linux/ramips/dts/mt7621_yuncore_fap640.dts
+
+diff --git a/target/linux/ramips/dts/mt7621_yuncore_fap640.dts b/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
+new file mode 100644
+index 0000000000..b48546d825
+--- /dev/null
++++ b/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
+@@ -0,0 +1,198 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include "mt7621.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++	compatible = "yuncore,fap640", "mediatek,mt7621-soc";
++	model = "YunCore FAP640";
++
++	aliases {
++		led-boot = &led_status_blue;
++		led-failsafe = &led_status_red;
++		led-running = &led_status_green;
++		led-upgrade = &led_status_red;
++		label-mac-device = &gmac0;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,115200";
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_green: status_green {
++			label = "green:status";
++			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_red: status_red {
++			label = "red:status";
++			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_blue: status_blue {
++			label = "blue:status";
++			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
++		};
++
++		wan {
++			label = "green:wan";
++			gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mt7530-0:04:link";
++		};
++
++		lan1 {
++			label = "green:lan1";
++			gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "mt7530-0:03:link";
++		};
++
++		lan2 {
++			label = "green:lan2";
++			gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mt7530-0:02:link";
++		};
++
++		lan3 {
++			label = "green:lan3";
++			gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mt7530-0:01:link";
++		};
++
++		lan4 {
++			label = "green:lan4";
++			gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mt7530-0:00:link";
++		};
++	};
++
++	watchdog {
++		compatible = "linux,wdt-gpio";
++		gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++		hw_algo = "toggle";
++		hw_margin_ms = <200>;
++		always-running;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++	};
++};
++
++&spi0 {
++	status = "okay";
++
++	flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <80000000>;
++		m25p,fast-read;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "Bootloader";
++				reg = <0x0 0x30000>;
++				read-only;
++			};
++
++			partition@30000 {
++				label = "Config";
++				reg = <0x30000 0x10000>;
++				read-only;
++			};
++
++			/* range 0x40000 to 0x50000 is empty in vendor
++			 * firmware, so we do not use it either
++			 */
++
++			factory: partition@50000 {
++				label = "Factory";
++				reg = <0x50000 0x40000>;
++				read-only;
++			};
++
++			partition@90000 {
++				compatible = "denx,uimage";
++				label = "firmware";
++				reg = <0x90000 0xf60000>;
++			};
++
++			partition@ff0000 {
++				label = "certificates";
++				reg = <0xff0000 0x10000>;
++			};
++		};
++	};
++};
++
++&pcie {
++	status = "okay";
++};
++
++&pcie1 {
++	wifi@0,0 {
++		compatible = "mediatek,mt76";
++		reg = <0x0000 0 0 0 0>;
++		mediatek,mtd-eeprom = <&factory 0x0>;
++		mediatek,disable-radar-background;
++	};
++};
++
++&gmac0 {
++	mtd-mac-address = <&factory 0x4>;
++};
++
++&switch0 {
++	gpio-controller;
++	#gpio-cells = <2>;
++
++	ports {
++		port@0 {
++			status = "okay";
++			label = "lan4";
++		};
++
++		port@1 {
++			status = "okay";
++			label = "lan3";
++		};
++
++		port@2 {
++			status = "okay";
++			label = "lan2";
++		};
++
++		port@3 {
++			status = "okay";
++			label = "lan1";
++		};
++
++		port@4 {
++			status = "okay";
++			label = "wan";
++			mtd-mac-address = <&factory 0x4>;
++			mtd-mac-address-increment = <1>;
++		};
++	};
++};
++
++&state_default {
++	gpio {
++		groups = "jtag", "wdt";
++		function = "gpio";
++	};
++};
+diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
+index 9e1eed024b..a528a257d4 100644
+--- a/target/linux/ramips/image/mt7621.mk
++++ b/target/linux/ramips/image/mt7621.mk
+@@ -1637,6 +1637,16 @@ define Device/youku_yk-l2
+ endef
+ TARGET_DEVICES += youku_yk-l2
+ 
++define Device/yuncore_fap640
++  $(Device/dsa-migration)
++  $(Device/uimage-lzma-loader)
++  IMAGE_SIZE := 15808k
++  DEVICE_VENDOR := YunCore
++  DEVICE_MODEL := FAP640
++  DEVICE_PACKAGES := kmod-mt7915e
++endef
++TARGET_DEVICES += yuncore_fap640
++
+ define Device/zbtlink_zbt-we1326
+   $(Device/dsa-migration)
+   $(Device/uimage-lzma-loader)
+diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+index 157e706534..be7b226c32 100644
+--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
++++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+@@ -38,4 +38,9 @@ case "$board" in
+ 		[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
+ 		[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
+ 		;;
++	yuncore,fap640)
++		hw_mac_addr="$(mtd_get_mac_binary Factory 0x4)"
++		[ "$PHYNBR" = "0" ] && macaddr_setbit_la "$hw_mac_addr" > /sys${DEVPATH}/macaddress
++		[ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
++		;;
+ esac
+-- 
+2.25.1
+

profiles/yuncore_fap640.yml

@@ -0,0 +1,8 @@
+---
+profile: yuncore_fap640
+target: ramips
+subtarget: mt7621
+description: Build image for the Yuncore FAP640
+image: bin/targets/ramips/mt7621/openwrt-ramips-mt7621-yuncore_fap640-squashfs-sysupgrade.bin
+include:
+  - ucentral-ap

profiles/yuncore_fap650.yml

@@ -0,0 +1,12 @@
+---
+profile: yuncore_fap650
+target: ipq807x
+subtarget: ipq60xx
+description: Build image for the YunCore FAP650
+image: bin/targets/ipq807x/ipq60xx/openwrt-ipq807x-yuncore_fap650-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x
+include:
+  - wifi-ax
+  - ucentral-ap