diff --git a/feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds b/feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds
index 030f8c827..48a2810e0 100755
--- a/feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds
+++ b/feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds
@@ -15,6 +15,9 @@ cig,wf188n)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
         ucidef_set_led_default "power" "POWER" "green:power" "on"
 	;;
+cig,wf660a)
+        ucidef_set_led_default "power" "POWER" "status:blue" "on"
+	;;
 edgecore,eap101)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
diff --git a/feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cp01-cig-wf660a.dtsi b/feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cp01-cig-wf660a.dtsi
index 059e7d282..860ece5ab 100755
--- a/feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cp01-cig-wf660a.dtsi
+++ b/feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cp01-cig-wf660a.dtsi
@@ -11,7 +11,6 @@
 #include "ipq6018-cpr-regulator.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
 
 / {
     compatible = "cig,wf660a", "qcom,ipq6018-ap-cp01", "qcom,ipq6018";
@@ -29,6 +28,11 @@
 		ethernet2 = "/soc/dp3";
 		ethernet3 = "/soc/dp4";
 		ethernet4 = "/soc/dp5";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -181,20 +185,20 @@
 		};
 	};
 
-	pwm_pins: pwm_pinmux {
+	led_pins: led_pins {
 		mux_1 {
 			pins = "gpio22";
-			function = "pwm02";
+			function = "gpio";
 			drive-strength = <8>;
 		};
 		mux_2 {
 			pins = "gpio23";
-			function = "pwm12";
+			function = "gpio";
 			drive-strength = <8>;
 		};
 		mux_3 {
 			pins = "gpio24";
-			function = "pwm22";
+			function = "gpio";
 			drive-strength = <8>;
 		};
 	};
@@ -208,27 +212,6 @@
 		};
 	};
 
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_usb0 {
-			pins = "gpio50";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
 	btcoex_pins: btcoex_pins {
 		mux_0 {
 			pins = "gpio51";
@@ -390,36 +373,24 @@
 		mdiobus = <&mdio>;
 	};
 
-	pwm {
-		pinctrl-0 = <&pwm_pins>;
-		pinctrl-names = "default";
-		used-pwm-indices = <1>, <1>, <1>, <0>;
-		dft-pwm-status = <0>, <1>, <0>, <0>;
-		status = "ok";
-	};
-
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
+		pinctrl-0 = <&led_pins>;
 		pinctrl-names = "default";
 
-		led@35 {
-			label = "led_5g";
-			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_5g";
-			default-state = "off";
+		led_power: led@22 {
+			label = "status:blue";
+			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 		};
-		led@37 {
-			label = "led_2g";
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_2g";
-			default-state = "off";
+		
+		led@23 {
+			label = "status:green";
+			gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
 		};
-		led@50 {
-			label = "led_usb0";
-			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "usb-host";
-			default-state = "off";
+
+		led@24 {
+			label = "status:red";
+			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };