baeef76 Revert "ucentral-schema: add support for configuring snmpd service using ucentral."
684a1aa firewall: upon up NAT'ed port 53 for ipv6
83a30b4 enable reconf for mpsk interfaces
Signed-off-by: John Crispin <john@phrozen.org>
42e59d5 Add system-password to the schema
8b3701b ucentral-schema: add support for configuring snmpd service using ucentral.
Signed-off-by: John Crispin <john@phrozen.org>
The device was not re-initialized if ony radio settings get updated without the
device settings changing.
Fixes: WIFI-14050
Signed-off-by: John Crispin <john@phrozen.org>
a626097 add schema for RRM based on Channel Utilization
39aed21 captive: allow loading the web-root from an external http server
37e3895 add multi-psk2-radius
Signed-off-by: John Crispin <john@phrozen.org>
To handle this, invoke hapd_subscriber.subscribe after the interface is created.
Also dont delete the interface from ifaces as ifaces should always contain the
configured ports (from uci config) per ieee8021x.uc design.
Deleting interfaces from ifaces will lead to ieee8021x.uc crashes.
Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
Fix configurations for the WPA2 Enterprise example with 802.11r enabled for fast transitioning.
Signed-off-by: Firas Shaari <fshaari-c@telecominfraproject.com>
This commit is an improvement over previous
commit 3598a243b3 which added a
fix for traffic disruption when vlan id of the lan port is
changed on devices with internal switches such as fap655,
CIG_WF186w,EAP-104.
This commit reconfigures the vlans for the mpsk clients on the
switch using the ucentral-event subsystem by tracking the
netifd_add events.
Fixes: WIFI-13797
Signed-off-by: joydeepbenison <joydeep.ghosh@benisontech.com>
ieee8021x
---------
1. Handle link_up events and update hostapd config
2. For certains scenarios, we need to remove and add
instead of reload (reload did not work).
Consider the following scenario -
Say on CIG 186w as an example
eth0.4086 interface exists with some non-ieee8021x config.
Push ieee8021x config. In general the flow is that
reload_config is called followed by invocation of services (from ucentral-schema)
Services inovation does n't wait until the configi reloaded ie in this context
ieee8021x service is invoked much before the network interfaces are recreated.
That is not correct. To handle this, we capture link-up events
and remove the existing interface (in hostapd as shown below) and add again
3. For swconfig platforms, the names contain a dot. Handle that gracefully in
ubus_unsub_object while adding hostapd interface
4. Add better logging using log.syslog
hostapd
---------
In case of swconfig switches, the basename of the interface should be based on the last dot.
Earlier it was done based on the first dot, which would result in incorrect basename.
For example if the interface name is eth0.4087 then the vlan->ifname would be eth0.4087. (A dot at the end) .
Before this patch, the basename was returned as eth0. It should be eth0.4087
Also fixed the return code by adding a default value of 0 and removed an unncessary check
for if_add before ubus add call.
Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
dcd571e allow only psc on 6GHz auto channel selection
310095a captive: handle /logoff and /logout paths
7aceedc ratelimit: reload the service rather than restarting it
ce41668 fingerprint: add missing allow_wan option to render code
721568b Merge pull request #17 from Telecominfraproject/WIFI-431-fix-update-internal-schema-validation
7d05e70 more AFC fixes
Signed-off-by: John Crispin <john@phrozen.org>
