Merge pull request #960 from Telecominfraproject/main

ucentral-schema: update to latest HEAD

feeds/hostapd/hostapd/patches/zzzz-002-initialize-mode-for-hostapd-cli-chan-switch.patch

@@ -0,0 +1,14 @@
+--- a/hostapd/ctrl_iface.c	2025-09-24 14:15:25.135668867 +0800
++++ b/hostapd/ctrl_iface.c	2025-09-24 15:32:46.082317382 +0800
+@@ -2657,6 +2657,11 @@ static int hostapd_ctrl_iface_chan_switc
+ 		break;
+ 	}
+ 
++    /* Initialize HT/VHT/HE parameters */
++    settings.freq_params.ht_enabled = iface->conf->ieee80211n;
++    settings.freq_params.vht_enabled = iface->conf->ieee80211ac;
++    settings.freq_params.he_enabled = iface->conf->ieee80211ax;
++
+ 	if (settings.freq_params.center_freq1)
+ 		dfs_range += hostapd_is_dfs_overlap(
+ 			iface, bandwidth, settings.freq_params.center_freq1);

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -48,7 +48,9 @@ ALLWIFIBOARDS:= \
 	indio-um-510axp-v1 \
 	indio-um-510axm-v1 \
 	indio-um-325ax-v2 \
+	indio-um-335ax \
 	indio-um-525axp \
+	indio-um-525axm \
 	muxi-ap3220l \
 	plasmacloud-pax1800 \
 	wallys-dr5018 \
@@ -444,7 +446,9 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-325ax-v2,Indio UM-325AX V2))
+$(eval $(call generate-ath11k-wifi-package,indio-um-335ax,Indio UM-335AX))
 $(eval $(call generate-ath11k-wifi-package,indio-um-525axp,Indio UM-525AXP))
+$(eval $(call generate-ath11k-wifi-package,indio-um-525axm,Indio UM-525AXM))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -17,11 +17,12 @@ edgecore,eap104)
         ucidef_set_led_default "power" "POWER" "green:power" "on"
 	;;
 indio,um-325ax-v2|\
+indio,um-335ax|\
+indio,um-525axm|\
 indio,um-525axp)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "led_2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "led_5g" "phy1tpt"
-	ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0"
+	ucidef_set_led_default "power" "POWER" "led_sys" "on"
-        ucidef_set_led_default "power" "POWER" "green:power" "on"
 	;;
 cig,wf186h|\
 cig,wf186w)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -49,6 +49,8 @@ qcom_setup_interfaces()
 			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
 	indio,um-325ax-v2|\
+	indio,um-335ax|\
+	indio,um-525axm|\
 	indio,um-525axp)
 		ucidef_set_interface_wan "eth1"
 		ucidef_set_interface_lan "eth0"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -143,6 +143,8 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
 	indio,um-325ax-v2|\
+	indio,um-335ax|\
+	indio,um-525axm|\
 	indio,um-525axp|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
@@ -186,6 +188,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 ath11k/qcn6122/hw1.0/caldata_2.bin)
 	case "$board" in
 	indio,um-325ax-v2|\
+	indio,um-525axm|\
 	indio,um-525axp|\
 	wallys,dr5018|\
 	edgecore,eap104|\
@@ -205,6 +208,7 @@ ath11k/qcn6122/hw1.0/caldata_2.bin)
 	;;
 ath11k/QCN9074/hw1.0/caldata_1.bin)
 	case "$board" in
+	indio,um-335ax|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
@@ -240,6 +244,7 @@ ath11k-macs)
 	edgecore,oap101e-6e|\
 	indio,um-325ax-v2|\
 	indio,um-525axp|\
+	indio,um-525axm|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -82,7 +82,9 @@ platform_check_image() {
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
 	indio,um-325ax-v2|\
+	indio,um-335ax|\
 	indio,um-525axp|\
+	indio,um-525axm|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
@@ -110,7 +112,9 @@ platform_do_upgrade() {
 	board=$(board_name)
 	case $board in
 	indio,um-325ax-v2|\
+	indio,um-335ax|\
 	indio,um-525axp|\
+	indio,um-525axm|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-indio-um-335ax.dts

@@ -0,0 +1,731 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2025, Shubham Vishwakarma <shubhamvis98@fossfrog.in>.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Indio UM-335AX";
+	compatible = "indio,um-335ax", "qcom,ipq5018-ap-mp03.1", "qcom,ipq5018-mp03.1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		led-boot = &led_red;
+		led-failsafe = &led_red;
+		led-running = &led_red;
+		led-upgrade = &led_red;
+
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	gpio-watchdog {
+		compatible = "linux,wdt-gpio";
+		gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+		hw_algo = "toggle";
+		hw_margin_ms = <5000>;
+		always-running;
+	};
+
+	reserved-memory {
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1800000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4C800000 {
+			no-map;
+			reg = <0x0 0x4C800000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4C900000 {
+			no-map;
+			reg = <0x0 0x4C900000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4CA00000 {
+			no-map;
+			reg = <0x0 0x4CA00000 0x0 0x200000>;
+		};
+
+		qcn9000_pcie0: qcn9000_pcie0@4cc00000 {
+			no-map;
+			reg = <0x0 0x4CC00000 0x0 0x2600000>;
+		};
+
+	#if defined(__CNSS2__)
+		mhi_region1: dma_pool1@4F200000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4F200000 0x0 0x900000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <28>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x1c>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+				ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <0x28>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x1e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <28>;
+					};
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		qcom,test@0 {
+			status = "ok";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio22", "gpio24", "gpio23", "gpio25";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_0 {
+			pins = "gpio7";
+			function = "qspi0";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_1 {
+			pins = "gpio6";
+			function = "qspi1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_2 {
+			pins = "gpio5";
+			function = "qspi2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_3 {
+			pins = "gpio4";
+			function = "qspi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	audio_pins: audio_pinmux {
+	};
+
+	leds_pins: leds_pins {
+		led_blue: led_5g {
+			label = "led_5g";
+			pins = "gpio34";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_green: led_2g {
+			label = "led_2g";
+			pins = "gpio33";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_red: led_sys {
+			label = "led_sys";
+			pins = "gpio26";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_onekey {
+			pins = "gpio28";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@33 {
+			label = "led_5g";
+			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "led_5g";
+			default-state = "off";
+		};
+		led@34 {
+			label = "led_2g";
+			gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "led_2g";
+			default-state = "off";
+		};
+		led@26 {
+			label = "led_sys";
+			gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "led_sys";
+			default-state = "on";
+		};
+		led@28 {
+			label = "led_onekey";
+			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "led_onekey";
+			default-state = "off";
+		};
+	};
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+			<&q6_caldb_region>;
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+					<&wcss_smp2p_in 9 0>,
+					<&wcss_smp2p_in 12 0>,
+					<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+					"gcc_wcss_acmt_clk",
+					"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+					<&wcss_smp2p_out 9>,
+					<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	// status = "disabled";
+};
+
+&usb3 {
+	status = "ok";
+	device-power-gpio = <&tlmm 24 1>;
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&blsp1_uart1 {
+	status = "ok";
+};
+
+&ssuniphy_0 {
+	status = "ok";
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	status = "ok";
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+&wcss {
+	status = "ok";
+};
+
+&pcie_x2phy {
+	status = "ok";
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "ok";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+		qrtr_instance_id = <0x20>;
+		qti,disable-rddm-prealloc;
+		qti,rddm-seg-len = <0x1000>;
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+#if defined(__CNSS2__)
+		memory-region = <0>,<&mhi_region1>;
+#else
+		base-addr = <0x4CB00000>;
+		m3-dump-addr = <0x4DF00000>;
+		etr-addr = <0x4E000000>;
+		qcom,caldb-addr = <0x4E100000>;
+		pageable-addr = <0x4E900000>;
+		qcom,tgt-mem-mode = <0x1>;
+#endif
+	};
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	qcom,tgt-mem-mode = <1>;
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi3 {
+	/* QCN9000 5G */
+	board_id = <0xa0>;
+	hremote_node = <&qcn9000_pcie0>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/* QCN9000 tgt-mem-mode=2 layout - 17MB
+	 * +=========+==============+=========+
+	 * |  Region | Start Offset |   Size  |
+	 * +---------+--------------+---------+
+	 * | HREMOTE |  0x4C900000  |   11MB  |
+	 * +---------+--------------+---------+
+	 * | M3 Dump |  0x4D400000  |   1MB   |
+	 * +---------+--------------+---------+
+	 * |   ETR   |  0x4D500000  |   1MB   |
+	 * +---------+--------------+---------+
+	 * | Pageable|  0x4D600000  |   4MB   |
+	 * +==================================+
+	 */
+	base-addr = <0x4C900000>;
+	m3-dump-addr = <0x4D400000>;
+	etr-addr = <0x4D500000>;
+	caldb-addr = <0>;
+	pageable-addr = <0x4D600000>;
+	caldb-size = <0>;
+	hremote-size = <0xB00000>;
+	tgt-mem-mode = <0x2>;
+	pageable-size = <0x400000>;
+#elif __IPQ_MEM_PROFILE_512_MB__
+	/* QCN9000 tgt-mem-mode=1 layout - 26MB
+	 * +=========+==============+=========+
+	 * |  Region | Start Offset |   Size  |
+	 * +---------+--------------+---------+
+	 * | HREMOTE |  0x4CB00000  |   12MB  |
+	 * +---------+--------------+---------+
+	 * | M3 Dump |  0x4D700000  |   1MB   |
+	 * +---------+--------------+---------+
+	 * |   ETR   |  0x4D800000  |   1MB   |
+	 * +---------+--------------+---------+
+	 * |  Caldb  |  0x4D900000  |   8MB   |
+	 * +---------+--------------+---------+
+	 * | Pageable|  0x4E100000  |   4MB   |
+	 * +==================================+
+	 */
+	base-addr = <0x4CB00000>;
+	m3-dump-addr = <0x4D700000>;
+	etr-addr = <0x4D800000>;
+	caldb-addr = <0x4D900000>;
+	pageable-addr = <0x4E100000>;
+	caldb-size = <0x800000>;
+	hremote-size = <0xC00000>;
+	tgt-mem-mode = <0x1>;
+	pageable-size = <0x400000>;
+#else
+	/* QCN9000 tgt-mem-mode=0 layout - 53MB
+	 * +=========+==============+=========+
+	 * |  Region | Start Offset |   Size  |
+	 * +---------+--------------+---------+
+	 * | HREMOTE |  0x4CB00000  |   35MB  |
+	 * +---------+--------------+---------+
+	 * | M3 Dump |  0x4EE00000  |   1MB   |
+	 * +---------+--------------+---------+
+	 * |   ETR   |  0x4EF00000  |   1MB   |
+	 * +---------+--------------+---------+
+	 * |  Caldb  |  0x4F000000  |   8MB   |
+	 * +---------+--------------+---------+
+	 * | Pageable|  0x4F800000  |   8MB   |
+	 * +==================================+
+	 */
+	base-addr = <0x4CB00000>;
+	m3-dump-addr = <0x4EE00000>;
+	etr-addr = <0x4EF00000>;
+	caldb-addr = <0x4F000000>;
+	pageable-addr = <0x4F800000>;
+	hremote-size = <0x2300000>;
+	caldb-size = <0x800000>;
+	tgt-mem-mode = <0x0>;
+	pageable-size = <0x800000>;
+#endif
+	status = "ok";
+};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-indio-um-525axm.dts

@@ -0,0 +1,941 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Indio UM-525AXM";
+	compatible = "indio,um-525axm", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+                //led-failsafe = &led_red;
+                //led-running = &led_green;
+                //led-upgrade = &led_green;
+                //led-gateway = &led_blue;
+                //led-factory = &led_blue;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E400000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F400000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4500000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
+			no-map;
+			reg = <0x0 0x4F300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
+			no-map;
+			reg = <0x0 0x4F400000 0x0 0x100000>;
+		};
+		
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          14MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D400000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D600000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4ED00000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4FD00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4FE00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4FF00000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x5400000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D400000 {
+			no-map;
+			reg = <0x0 0x4D400000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
+			no-map;
+			reg = <0x0 0x4D600000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
+			no-map;
+			reg = <0x0 0x4E600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
+			no-map;
+			reg = <0x0 0x4E700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
+			no-map;
+			reg = <0x0 0x4E800000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4ED00000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
+			no-map;
+			reg = <0x0 0x4FD00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
+			no-map;
+			reg = <0x0 0x4FE00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
+			no-map;
+			reg = <0x0 0x4FF00000 0x0 0x500000>;
+		};
+
+	#endif
+	};
+
+	soc {
+		gpio-watchdog {
+			compatible = "linux,wdt-gpio";
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			hw_algo = "toggle";
+			hw_margin_ms = <5000>;
+			always-running;
+		};
+
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <28>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x1c>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+				ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <0x28>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x1e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <28>;
+					};
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		qcom,test@0 {
+			status = "ok";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio22", "gpio24", "gpio23", "gpio25";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_0 {
+			pins = "gpio7";
+			function = "qspi0";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_1 {
+			pins = "gpio6";
+			function = "qspi1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_2 {
+			pins = "gpio5";
+			function = "qspi2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_3 {
+			pins = "gpio4";
+			function = "qspi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+audio_pins: audio_pinmux {
+};
+        leds_pins: leds_pins {
+                led_5g {
+                        pins = "gpio34";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+                led_2g {
+                        pins = "gpio33";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+                led_sys {
+                        pins = "gpio26";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+		led_onekey {
+                        pins = "gpio28";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+        };
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+        leds {
+                compatible = "gpio-leds";
+                pinctrl-0 = <&leds_pins>;
+                pinctrl-names = "default";
+
+                led_blue: led@34 {
+                        label = "led_5g";
+                        gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_5g";
+                        default-state = "off";
+                };
+                led_green: led@33 {
+                        label = "led_2g";
+                        gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_2g";
+                        default-state = "off";
+                };
+                led_red: led@26 {
+                        label = "led_sys";
+                        gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_sys";
+                        default-state = "off";
+                };
+		led@28 {
+                        label = "led_onekey";
+                        gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_onekey";
+                        default-state = "off";
+                };
+        };
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+					<&wcss_smp2p_in 9 0>,
+					<&wcss_smp2p_in 12 0>,
+					<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+					"gcc_wcss_acmt_clk",
+					"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+					<&wcss_smp2p_out 9>,
+					<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+					<&wcss_smp2p_in 17 0>,
+					<&wcss_smp2p_in 20 0>,
+					<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+					<&wcss_smp2p_out 17>,
+					<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+
+	q6_wcss_pd3: remoteproc_pd3 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+					<&wcss_smp2p_in 25 0>,
+					<&wcss_smp2p_in 28 0>,
+					<&wcss_smp2p_in 27 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+					<&wcss_smp2p_out 25>,
+					<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef	__IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+	#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+	#endif
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x50>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "disabled";
+};
+
+&wifi2 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,rproc = <&q6_wcss_pd3>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0xb0>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data2>;
+#else
+	memory-region = <&q6_qcn6122_data2>;
+#endif
+	status = "ok";
+};
+
+
+&usb3 {
+	status = "ok";
+	device-power-gpio = <&tlmm 24 1>;
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	#status = "disabled";
+	#perst-gpio = <&tlmm 18 1>;
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	#status = "disabled";
+	#perst-gpio = <&tlmm 15 1>;
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x1_rp {
+        status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+        status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};
+

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -102,6 +102,15 @@ define Device/indio_um-325ax-v2
 endef
 TARGET_DEVICES += indio_um-325ax-v2
 
+define Device/indio_um-335ax
+  DEVICE_TITLE := Indio UM-335ax
+  DEVICE_DTS := qcom-ipq5018-indio-um-335ax
+  SUPPORTED_DEVICES := indio,um-335ax
+  DEVICE_PACKAGES := ath11k-wifi-indio-um-335ax ath11k-firmware-qcn9000 ath11k-firmware-ipq50xx-spruce
+  DEVICE_DTS_CONFIG := config@mp03.1
+endef
+TARGET_DEVICES += indio_um-335ax
+
 define Device/indio_um-525axp
   DEVICE_TITLE := Indio UM-525axp
   DEVICE_DTS := qcom-ipq5018-indio-um-525axp
@@ -111,6 +120,15 @@ define Device/indio_um-525axp
 endef
 TARGET_DEVICES += indio_um-525axp
 
+define Device/indio_um-525axm
+  DEVICE_TITLE := Indio UM-525axm
+  DEVICE_DTS := qcom-ipq5018-indio-um-525axm
+  SUPPORTED_DEVICES := indio,um-525axm
+  DEVICE_PACKAGES := ath11k-wifi-indio-um-525axm ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+endef
+TARGET_DEVICES += indio_um-525axm
+
 define Device/udaya_a6_id2
   DEVICE_TITLE := Udaya A6 - ID2
   DEVICE_DTS := qcom-ipq5018-udaya-a6-id2

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-edgecore-eap112.dts

@@ -169,7 +169,8 @@
 		compatible = "mediatek,eth-mac";
 		reg = <0>;
 		phy-mode = "sgmii";
-		phy-handle = <&phy1>;      // add phy handler
+		phy-handle = <&phy30>;
+		phy-handle2 = <&phy1>;
 		mtd-mac-address = <&factory 0x24>;
 	};
 
@@ -193,6 +194,16 @@
 			nvmem-cell-names = "phy-cal-data";
 		};
 
+		phy30: ethernet-phy@30 { // AN8801SB
+			compatible = "ethernet-phy-idc0ff.0421";
+			reg = <30>; //0x1e
+			phy-mode = "sgmii";
+			full-duplex;
+			pause;
+			airoha,surge = <0>;
+			airoha,polarity = <2>;
+		};
+
 		phy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-id03a2.9471";
 			reg = <24>;            // set phy address to 0x18
@@ -200,9 +211,8 @@
 			reset-assert-us = <600>;
 			reset-deassert-us = <20000>;
 			phy-mode = "sgmii";
-    };
+		};
-
+	};
-        };
 };
 
 &hnat {

feeds/qca-wifi-7/hostapd/files/common.uc

@@ -259,8 +259,13 @@ const phy_proto = {
 			addr[0] ^= idx << 2;
 			break;
 		case "b5":
-			if (mbssid)
+			if (mbssid) {
+				let b5 = addr[5];
+				addr[5] = addr[3];
+				addr[3] = b5;
+				addr[5] &= ~0xf;
 				addr[0] |= 2;
+			}
 			addr[5] ^= idx;
 			break;
 		default:

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -14,9 +14,12 @@ ipq53xx_setup_interfaces()
 		;;
 	cig,wf189|\
 	edgecore,eap105|\
-	sercomm,ap72tip|\
+	sercomm,ap72tip)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		;;
 	sonicfi,rap750w-311a)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan" "1:lan"
 		;;
 	sonicfi,rap7110c-341x|\
 	sonicfi,rap750e-h|\

feeds/qca-wifi-7/ipq53xx/config-6.1

@@ -1180,7 +1180,7 @@ CONFIG_QTI_LICENSE_MANAGER=y
 # CONFIG_SYMBOLIC_ERRNAME is not set
 # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
 # CONFIG_LEDS_CLASS_MULTICOLOR is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y 
 # CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set
 # CONFIG_PINCTRL_SINGLE is not set
 # CONFIG_RANDOM_TRUST_BOOTLOADER is not set

feeds/qca-wifi-7/ipq53xx/patches-6.1/0660-add-IPQ_MEM_PROFILE-in-arm64-kconfig.patch

@@ -0,0 +1,33 @@
+From f7b27331b915477cd289c37b56efb0d28b2d6f38 Mon Sep 17 00:00:00 2001
+From: Antonio Wu <antonio.wu@cybertan.com.tw>
+Date: Tue, 5 Aug 2025 10:39:58 +0000
+Subject: [PATCH] Add IPQ_MEM_PROFILE in arm64 kconfig
+
+---
+ arch/arm64/Kconfig | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
+index 702a289..7864e79 100644
+--- a/arch/arm64/Kconfig
++++ b/arch/arm64/Kconfig
+@@ -2143,6 +2143,16 @@ config STACKPROTECTOR_PER_TASK
+ 	def_bool y
+ 	depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_SYSREG
+ 
++config IPQ_MEM_PROFILE
++	int "Select Memory Profile"
++	range 0 1024
++	default 0
++	help
++	  This option select memory profile to be used, which defines
++	  the reserved memory configuration used in device tree.
++
++	  If unsure, say 0
++
+ # The GPIO number here must be sorted by descending number. In case of
+ # a multiplatform kernel, we just want the highest value required by the
+ # selected platforms.
+-- 
+2.17.1
+

feeds/qca-wifi-7/mac80211/patches-sonicfi_rap7110c_341x/ath12k/0001-sonicfi_rap7110c-341x-therlaml-setting.patch

@@ -0,0 +1,63 @@
+Index: backports-6.5-rc3/drivers/net/wireless/ath/ath12k/thermal.h
+===================================================================
+--- backports-6.5-rc3.orig/drivers/net/wireless/ath/ath12k/thermal.h
++++ backports-6.5-rc3/drivers/net/wireless/ath/ath12k/thermal.h
+@@ -13,35 +13,35 @@
+ 
+ /* Below temperatures are in celsius */
+ #define ATH12K_THERMAL_LVL0_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 105
+-#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
++#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 110
++#define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 105
++#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 115
++#define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 110
++#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 120
++#define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 115
++#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 125
+ 
+ #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
++#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 105
++#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 100
++#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 110
++#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 105
++#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
++#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
++#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
++#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 110
+ #define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
+-#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
+-#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 90
+-#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 100
++#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 30
++#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 50
++#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 70
+ 
+-#define ATH12K_THERMAL_LVL0_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL4_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
++#define ATH12K_THERMAL_LVL0_V2_DUTY_CYCLE 0
++#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE 20
++#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE 40
++#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE 80
++#define ATH12K_THERMAL_LVL4_V2_DUTY_CYCLE 100
+ 
+ #define THERMAL_CONFIG_POUT0                        0
+ #define THERMAL_CONFIG_POUT1                        12

feeds/qca-wifi-7/mac80211/patches-sonicfi_rap750w_311a/ath12k/0001-sonicfi-rap750w-311a-thermal-setting.patch

@@ -0,0 +1,57 @@
+--- a/drivers/net/wireless/ath/ath12k/thermal.h
++++ b/drivers/net/wireless/ath/ath12k/thermal.h
+@@ -13,34 +13,34 @@
+ 
+ /* Below temperatures are in celsius */
+ #define ATH12K_THERMAL_LVL0_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 105
++#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 105
++#define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 100
++#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 110
++#define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 105
++#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 115
++#define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 110
+ #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
++#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 105
++#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 100
++#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 110
++#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 105
++#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
++#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
++#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
++#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 110
+ #define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
+-#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
+-#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 90
+-#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 100
++#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 30
++#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 50
++#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 70
+ 
+ #define ATH12K_THERMAL_LVL0_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
++#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
++#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
++#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
+ #define ATH12K_THERMAL_LVL4_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
+ 
+ #define THERMAL_CONFIG_POUT0                        0

feeds/qca-wifi-7/qca-ssdk-qca/patches-zyxel_nwa50be/0001-pinctrl-make-the-switch-LED-works.patch

@@ -1,47 +0,0 @@
-From 7fa9e9b683f1c573c58a14755347988919bc7d06 Mon Sep 17 00:00:00 2001
-From: YenLin Pan <yenlin.pan@zyxel.com.tw>
-Date: Wed, 14 May 2025 13:47:06 +0800
-Subject: [PATCH] pinctrl: make the switch LED works
-
-Enable switch LED pin definition for LED0/LED1/LED2 control
-
-Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>
----
- src/init/ssdk_mht_pinctrl.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/src/init/ssdk_mht_pinctrl.c b/src/init/ssdk_mht_pinctrl.c
-index 2debe59..1ae0002 100755
---- a/src/init/ssdk_mht_pinctrl.c
-+++ b/src/init/ssdk_mht_pinctrl.c
-@@ -33,11 +33,17 @@ static struct mht_pinctrl_setting mht_pin_settings[] = {
-     /*PINs default MUX Setting*/
-     MHT_PIN_SETTING_MUX(0,  MHT_PIN_FUNC_INTN_WOL),
-     MHT_PIN_SETTING_MUX(1,  MHT_PIN_FUNC_INTN),
--#if 0
-+#if 1
-     MHT_PIN_SETTING_MUX(2,  MHT_PIN_FUNC_P0_LED_0),
-     MHT_PIN_SETTING_MUX(3,  MHT_PIN_FUNC_P1_LED_0),
-     MHT_PIN_SETTING_MUX(4,  MHT_PIN_FUNC_P2_LED_0),
-     MHT_PIN_SETTING_MUX(5,  MHT_PIN_FUNC_P3_LED_0),
-+    MHT_PIN_SETTING_MUX(6,  MHT_PIN_FUNC_P0_LED_2),
-+    MHT_PIN_SETTING_MUX(7,  MHT_PIN_FUNC_P1_LED_2),
-+    MHT_PIN_SETTING_MUX(8,  MHT_PIN_FUNC_P2_LED_2),
-+    MHT_PIN_SETTING_MUX(9,  MHT_PIN_FUNC_P3_LED_2),
-+#endif
-+#if 0
-     MHT_PIN_SETTING_MUX(6,  MHT_PIN_FUNC_PPS_IN),
-     MHT_PIN_SETTING_MUX(7,  MHT_PIN_FUNC_TOD_IN),
-     MHT_PIN_SETTING_MUX(8,  MHT_PIN_FUNC_RTC_REFCLK_IN),
-@@ -49,7 +55,7 @@ static struct mht_pinctrl_setting mht_pin_settings[] = {
-     MHT_PIN_SETTING_MUX(13, MHT_PIN_FUNC_P0_TOD_OUT),
-     MHT_PIN_SETTING_MUX(14, MHT_PIN_FUNC_P0_CLK125_TDI),
-     MHT_PIN_SETTING_MUX(15, MHT_PIN_FUNC_P0_SYNC_CLKO_PTP),
--#if 0
-+#if 1
-     MHT_PIN_SETTING_MUX(16, MHT_PIN_FUNC_P0_LED_1),
-     MHT_PIN_SETTING_MUX(17, MHT_PIN_FUNC_P1_LED_1),
-     MHT_PIN_SETTING_MUX(18, MHT_PIN_FUNC_P2_LED_1),
--- 
-2.34.1
-

feeds/tip/certificates/files/etc/init.d/early_boot

@@ -25,6 +25,11 @@ copy_certificates() {
 }
 
 boot() {
+	case "$(board_name)" in
+	sonicfi,rap6*)
+		touch /tmp/squashfs
+	;;
+	esac
 	[ -f /etc/ucentral/key.pem ] && return
 	/usr/bin/mount_certs
 	copy_certificates

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -37,13 +37,16 @@ sonicfi,rap7*)
 		mtd=$(find_mtd_index certificates)
 		[ -n "$mtd" ] && mount -t ext4 /dev/mtdblock$mtd /certificates
 	fi
-	if [ ! -f /certificates/cert.pem ] || [ ! -f /certificates/key.pem ]; then
+	;;
-		part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
+sonicfi,rap6*)
-		if [ -n "part" ]; then
+	mtd=$(find_mtd_index certificates)
-			mmc_dev=$(echo $(find_mmc_part "$part") | sed 's/^.\{5\}//')
+	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-			[ -n "$mmc_dev" ] && tar xf /dev/$mmc_dev -C /certificates
+		mount -t squashfs /dev/mtdblock$mtd /mnt
-		fi
+		cp /mnt/* /certificates
+		umount /mnt
 	fi
+		mtd=$(find_mtd_index devinfo)
+		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
 	;;
 udaya,a5-id2|\
 yuncore,ax820)
@@ -59,19 +62,6 @@ yuncore,ax820)
 		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
 	fi
 	;;
-sonicfi,rap6*)
-	mtd=$(find_mtd_index certificates)
-	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-		mount -t squashfs /dev/mtdblock$mtd /mnt
-		cp /mnt/* /certificates
-		umount /mnt
-	fi
-	part=$(tar_part_lookup "devinfo" "certificates")
-	if [ -n "$part" ]; then
-		mtd=$(find_mtd_index $part)
-		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
-	fi
-	;;
 *)
 	mtd=$(find_mtd_index certificates)
 

feeds/tip/certificates/files/usr/bin/store_certs

@@ -14,13 +14,6 @@ tar_part_lookup() {
 
 . /lib/functions.sh
 case "$(board_name)" in
-sonicfi,rap7110c-341x)
-	cd /certificates
-	tar cf /tmp/certs.tar .
-	part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
-	mmc_dev=$(echo $(find_mmc_part $part) | sed 's/^.\{5\}//')
-	dd if=/tmp/certs.tar of=/dev/$mmc_dev
-	;;
 udaya,a5-id2|\
 yuncore,ax820)
 	cd /certificates
@@ -33,8 +26,7 @@ sonicfi,rap6*)
 	if [ "$(fw_printenv -n store_certs_disabled)" != "1" ]; then
 		cd /certificates
 		tar cf /tmp/certs.tar .
-		part=$(tar_part_lookup "devinfo" "certificates")
+		mtd=$(find_mtd_index devinfo)
-		mtd=$(find_mtd_index $part)
 		block_size=$(cat /sys/class/mtd/mtd$mtd/size)
 		dd if=/tmp/certs.tar of=/tmp/certs_pad.tar bs=$block_size conv=sync
 		mtd write /tmp/certs_pad.tar /dev/mtd$mtd

feeds/tip/cloud_discovery/files/usr/bin/cloud_discovery

@@ -23,6 +23,7 @@ let ubus = libubus.connect();
 let uci = libuci.cursor();
 let state = DISCOVER;
 let discovery_method = "";
+let discovery_block_list = [];
 let validate_time;
 let offline_time;
 let orphan_time;
@@ -102,6 +103,9 @@ function gateway_load() {
 }
 
 function discovery_state_write() {
+	if (length(discovery_method) == 0)
+		return;
+
 	let discovery_state = {
 		"type": discovery_method,
 		"updated": time()
@@ -155,6 +159,7 @@ function set_state(set) {
 		ulog(LOG_INFO, 'Wait for validation\n');
 		validate_time = time();
 		state = VALIDATING;
+		push(discovery_block_list, discovery_method);
 		break;
 
 	case ONLINE:
@@ -163,6 +168,7 @@ function set_state(set) {
 			ulog(LOG_INFO, 'Setting cloud controller to validated\n');
 			gateway_write({ valid: true });
 			discovery_state_write();
+			discovery_block_list = [];
 		}
 		break;
 
@@ -231,6 +237,13 @@ function time_is_valid() {
 	return valid;
 }
 
+function is_discover_method_blacked() {
+	if (discovery_method in discovery_block_list)
+		return true;
+
+	return false;
+}
+
 function interval_handler() {
 	printf(`State ${state}\n`);
 	switch(state) {
@@ -260,19 +273,21 @@ function interval_handler() {
 		if (!time_is_valid())
 			return;
 
-		discovery_method = DISCOVER_DHCP;
-		if (discover_dhcp())
-			return;
-
 		if (system('/usr/bin/est_client enroll'))
 			return;
 
+		discovery_method = DISCOVER_DHCP;
+		if (!is_discover_method_blacked() && discover_dhcp())
+			return;
+
 		discovery_method = DISCOVER_FLASH;
-		if (!discover_flash())
+		if (!is_discover_method_blacked() && !discover_flash())
 			return;
 
 		discovery_method = DISCOVER_LOOKUP;
 		redirector_lookup();
+
+		discovery_block_list = [];
 		break;
 
 	case VALIDATING:

feeds/tip/cloud_discovery/files/usr/share/ucentral/cloud_discovery.uc

@@ -5,8 +5,8 @@ import * as fs from 'fs';
 
 let cmd = ARGV[0];
 let ifname = getenv("interface");
-let opt138 = getenv("opt138");
+let opt138 = fs.readfile('/tmp/dhcp-option-138');
-let opt224 = getenv("opt224");
+let opt224 = fs.readfile('/tmp/dhcp-option-224');
 
 if (cmd != 'bound' && cmd != 'renew')
 	exit(0);
@@ -23,14 +23,14 @@ let cloud = {
 	lease: true,
 };
 if (opt138) {
-	let dhcp = hexdec(opt138);
+	let dhcp = opt138;
 	dhcp = split(dhcp, ':');
 	cloud.dhcp_server = dhcp[0];
 	cloud.dhcp_port = dhcp[1] ?? 15002;
 	cloud.no_validation = true;
 }
 if (opt224) {
-	let dhcp = hexdec(opt224);
+	let dhcp = opt224;
 	dhcp = split(dhcp, ':');
 	cloud.dhcp_server = dhcp[0];
 	cloud.dhcp_port = dhcp[1] ?? 15002;

feeds/ucentral/ucentral-client/Makefile

@@ -4,6 +4,7 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
+PKG_MIRROR_HASH:=2935998d6074f0c290d9b96c2988c89aae6f405608f12a0063fa7215498bae9a
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2025-08-11
 PKG_SOURCE_VERSION:=549e84e5fea7230c5471d6a3dbddcc7d3152f665

feeds/ucentral/ucentral-client/files/etc/ucentral/version.json

@@ -1,5 +1,5 @@
 {
 	"major": 4,
 	"minor": 1,
-	"patch": 0
+	"patch": 1
 }

feeds/ucentral/ucentral-event/files/ucentral-event

@@ -2,6 +2,8 @@
 
 'use strict';
 
+push(REQUIRE_SEARCH_PATH, '/usr/share/ucentral/*.uc');
+
 import * as libubus from 'ubus';
 import * as libuci from 'uci';
 import * as uloop from 'uloop';
@@ -36,6 +38,7 @@ let ucentral_running = false;
 let pending_events = [];
 let relay = {};
 let net_config = {};
+let vlan_refcount = {};
 
 
 function config_load() {
@@ -52,6 +55,20 @@ function config_load() {
 	net_config = {};
 }
 
+function vlan_refcount_init() {
+	let stations = require('wifi.station');
+
+	vlan_refcount = {};
+
+	for (let k, v in stations) {
+		let vlan = split(k, '-v')[1];
+		let count = length(v);
+		if (vlan && count > 0) {
+			vlan_refcount[vlan] = count;
+		}
+	}
+}
+
 function match(object, type, list) {
 	if (object in list || type in list)
 		return true;
@@ -261,13 +278,24 @@ handlers = {
 		if (config.config.swconfig)
 			return handlers.vlan_add_swconfig(notify);
 
-		for (let wan in wan_ports) {
+		let vlan_id = `${notify.data.vlan_id}`;
-			let msg = {
+		vlan_refcount[vlan_id] = (vlan_refcount[vlan_id] || 0) + 1;
-				name: wan,
+
-				vlan: [ `${notify.data.vlan_id}:t` ]
+		let parts = split(notify.data.ifname, '-v');
-			};
+		let is_wifi_iface = (length(parts) == 2 && wildcard(parts[0], 'wlan*'));
-			ubus.call('network.interface.up_none', 'add_device', msg);
+
-			ubus.call('udevstats', 'add_device', { device: wan, vlan: +notify.data.vlan_id });
+		if (vlan_refcount[vlan_id] > 1 && !is_wifi_iface)
+			return;
+
+		if (vlan_refcount[vlan_id] == 1) {
+			for (let wan in wan_ports) {
+				let msg = {
+					name: wan,
+					vlan: [ `${notify.data.vlan_id}:t` ]
+				};
+				ubus.call('network.interface.up_none', 'add_device', msg);
+				ubus.call('udevstats', 'add_device', { device: wan, vlan: +notify.data.vlan_id });
+			}
 		}
 
 		let msg = {
@@ -282,6 +310,14 @@ handlers = {
 	vlan_remove: function(notify) {
 		if (config.config.swconfig)
 			return;
+
+		let vlan_id = `${notify.data.vlan_id}`;
+		vlan_refcount[vlan_id] = (vlan_refcount[vlan_id] || 1) - 1;
+
+		if (vlan_refcount[vlan_id] > 0)
+			return;
+		delete vlan_refcount[vlan_id];
+
 		for (let wan in wan_ports) {
 			let msg = {
 				name: wan,
@@ -624,6 +660,7 @@ let ubus_methods = {
 };
 
 config_load();
+vlan_refcount_init();
 
 hapd_subscriber = ubus.subscriber(hapd_subscriber_notify_cb, hapd_subscriber_remove_cb);
 dhcp_subscriber = ubus.subscriber(dhcp_subscriber_notify_cb, dhcp_subscriber_remove_cb);

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=dd37ce95e77af90424d4792f1d292e90242d66ebf5c6552afdf364fd33c58af8
+PKG_MIRROR_HASH:=c0f43db0530a38eb424e81908ad47a14e1d4d8f8a86eb148e34f98187c79ba6b
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-08-12
+PKG_SOURCE_DATE:=2025-10-16
-PKG_SOURCE_VERSION:=a1e7571a07ad309301954149884b13f71fbf74be
+PKG_SOURCE_VERSION:=dc9cad95641266a08de73aab85d931d992090159
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-schema/files/etc/ucentral/examples/multi-psk.json

@@ -1,17 +1,12 @@
 {
 	"uuid": 2,
 	"radios": [
-		{
-			"band": "6G",
-			"country": "CA",
-			"channel-mode": "HE",
-			"channel-width": 80
-		},
 		{
 			"band": "5G",
 			"country": "CA",
 			"channel-mode": "HE",
-			"channel-width": 80
+			"channel-width": 80,
+			"channel": 36
 		},
 		{
 			"band": "2G",
@@ -57,10 +52,7 @@
 							"key": "bbbbbbbb"
 						}
 					],
-					"roaming": {
+					"roaming": true
-						"message-exchange": "ds",
-						"generate-psk": true
-					}
 				}
 			]
 		},

feeds/ucentral/ucentral-schema/files/usr/share/ucentral/wifi_max_user.uc

@@ -1,7 +1,10 @@
 #!/usr/bin/ucode 
+import { readfile } from "fs";
 
 let nl = require("nl80211");
 let def = nl.const;
+let board_name = rtrim(readfile('/tmp/sysinfo/board_name'), '\n');
+let phy_index = 0;
 
 function phy_get() {
 	let res = nl.request(def.NL80211_CMD_GET_WIPHY, def.NLM_F_DUMP, { split_wiphy_dump: true });
@@ -12,5 +15,11 @@ function phy_get() {
 	return res;
 }
 
+switch(board_name) {
+case 'edgecore,eap112':
+        phy_index = 1;
+        break;
+}
+
 let phys = phy_get();
-printf("%d\n", phys[0].max_ap_assoc || 32);
+printf("%d\n", phys[phy_index].max_ap_assoc || 32);

feeds/ucentral/udhcpinject/Makefile

@@ -12,7 +12,7 @@ define Package/udhcpinject
 	SECTION:=net
 	CATEGORY:=Network
 	TITLE:=An agent to inject DHCP option
-	DEPENDS:=+libpcap +kmod-ifb +tc
+	DEPENDS:=+libpcap +kmod-ifb +tc +libuci
 	MAINTAINER:=kmk <alex18_huang@accton.com>
 endef
 

feeds/ucentral/udhcpinject/files/etc/config/dhcpinject

@@ -1,10 +1,19 @@
-# config device 'uplink'
+#config network 'wan0'
-#   list port 'eth0'
+#        option upstream 'up0v0'
-#
+#        list ssid5G '18-KMK-YAYA'
-# config ssids 'ssids'
+#        list ssid5G '18-KMK-AKIHO'
-#   list ssid 'EAP101-ERICHI'
+#        list ssid2G '18-KMK-YAYA'
-#   list ssid 'EAP101-AKIHO'
+#        list ssid2G '18-KMK-AKIHO'
-#   list ssid 'EAP101-DAMAYU'
+#        option count '4'
-#
+
-# config dhcpinject 'dhcpinject'
+#config network 'wan284'
-#   option iface_count '6'
+#        option upstream 'up1v284'
+#        list ssid5G '18-KMK-SARAN'
+#        list ssid2G '18-KMK-SARAN'
+#        option count '2'
+
+#config network 'wan283'
+#        option upstream 'up2v283'
+#        list ssid5G '18-KMK-ERICHI'
+#        list ssid2G '18-KMK-ERICHI'
+#        option count '2'

feeds/ucentral/udhcpinject/files/etc/init.d/dhcpinject

@@ -9,55 +9,18 @@ SERVICE_NAME="dhcpinject"
 PROG=/usr/bin/udhcpinject
 
 start_service() {
-    local ssids=""
+    # check if config file has contents by executing `uci get dhcpinject.@network[0]`
-    local ports=""
+    if [ -z "$(uci get dhcpinject.@network[0] 2>/dev/null)" ]; then
-    local ifaces=""
+        echo "No upstreams specified, exiting $SERVICE_NAME"
-
+        return 0
-    # Function to process each ssid
-    append_ssid() {
-        local value="$1"
-        if [ -n "$ssids" ]; then
-            ssids="$ssids,$value"
-        else
-            ssids="$value"
-        fi
-    }
-
-    append_port() {
-        local value="$1"
-        if [ -n "$ports" ]; then
-            ports="$ports,$value"
-        else
-            ports="$value"
-        fi
-    }
-
-    # Load the dhcpinject config
-    config_load dhcpinject
-
-    # Get the list of SSIDs
-    config_list_foreach ssids ssid append_ssid
-
-    # Get the list of ports
-    config_list_foreach uplink port append_port
-
-    # Get the iface_count
-    config_get ifaces dhcpinject iface_count
-    
-    # Fallback to eth0 if no ports are specified
-    if [ -z "$ports" ]; then
-        ports="eth0"
     fi
-
+    # Wait for wifi to be up
-    # Optional: Log or echo for debugging
+    ubus -t 90 wait_for network.wireless
-    logger -t dhcp_inject "Generated SSIDs=$ssids, Uplink=$ports, IFACEs=$ifaces"
 
     procd_open_instance "$SERVICE_NAME"
     procd_set_param command $PROG
-    procd_set_param env SSIDs="$ssids" PORTs="$ports" IFACEs="$ifaces"
     procd_set_param respawn 3600 10 10
     procd_set_param file /etc/config/dhcpinject
-    procd_set_param reload_signal SIGHUP
     procd_close_instance
 }
 

feeds/ucentral/udhcpinject/src/Makefile

@@ -7,7 +7,7 @@ obj-y := udhcpinject.o
 all: udhcpinject
 
 udhcpinject: $(obj-y)
-	$(CC) $(LDFLAGS) -lpcap -o $@ $(obj-y)
+	$(CC) $(LDFLAGS) -lpcap -luci -o $@ $(obj-y)
 
 %.o: %.c
 	$(CC) $(CFLAGS) $(TARGET_CFLAGS) -c $< -o $@

feeds/ucentral/udhcpinject/src/udhcpinject.c

@@ -6,286 +6,81 @@
 #include <linux/ip.h>
 #include <linux/udp.h>
 #include <net/if.h>
-#include <netinet/in.h>
+
 #include <pcap.h>
 #include <signal.h>
-#include <stdio.h>
+
-#include <stdlib.h>
-#include <string.h>
 #include <sys/socket.h>
 #include <syslog.h>
 #include <unistd.h>
+#include <uci.h>
 
 #include "udhcpinject.h"
 
-#define MAX_INTERFACES 48
-#define MAX_PORTS 8
-
-// Global variables
-struct iface_info *iface_map = NULL;
-static struct port_info *ports = NULL;
-int iface_count = 0;
-int port_count = 0;
-int total_iface = 0;
-static pcap_t *handle = NULL;
-static char *provided_ssids = NULL;
-static char *provided_ports = NULL;
-
-// Function to cleanup tc rules
-void cleanup_tc() {
-    char cmd[1024];
-    for (int i = 0; i < iface_count; i++) {
-        snprintf(cmd, sizeof(cmd), "tc filter del dev %s ingress pref 32 2>/dev/null",
-                 iface_map[i].iface);
-        system(cmd);
-    }
-}
-
 // Cleanup function
-void cleanup() {
+void cleanup()
+{
     syslog(LOG_INFO, "Cleaning up resources...\n");
-    cleanup_tc();
 
-    if (handle) {
+    if (handle)
+    {
         pcap_close(handle);
         handle = NULL;
     }
-    if (ports) {
+
-        for (int i = 0; i < port_count; i++) {
+    if (iface_map)
-            if (ports[i].sock >= 0) {
+    {
-                close(ports[i].sock);
+        char cmd[1024];
-            }
+        for (int i = 0; i < iface_map_size; i++)
+        {
+            snprintf(cmd, sizeof(cmd), "tc filter del dev %s ingress pref 32 2>/dev/null",
+                     iface_map[i].iface);
+            system(cmd);
         }
-        free(ports);
-        ports = NULL;
-        port_count = 0;
-    }
-    if (iface_map) {
         free(iface_map);
-        iface_map = NULL;
-        iface_count = 0;
     }
-    if (provided_ssids) {
+
-        free(provided_ssids);
+    if (port_map)
-        provided_ssids = NULL;
+    {
-    }
+        for (int i = 0; i < port_map_size; i++)
-    if (provided_ports) {
+        {
-        free(provided_ports);
+            close(port_map[i].sock);
-        provided_ports = NULL;
+        }
+        free(port_map);
     }
+
     syslog(LOG_INFO, "Cleanup complete.\n");
 }
 
-// Function to parse SSIDs and populate iface_map
+int setup_tc()
-int parse_ssids(const char *ssids) {
+{
-    if (iface_map) {
+    char cmd[512];
-        free(iface_map);
-        iface_map = NULL;
-        iface_count = 0;
-    }
-
-    // Create a set of provided SSIDs for efficient lookup
-    char ssids_copy[256];
-    strncpy(ssids_copy, ssids, sizeof(ssids_copy) - 1);
-    ssids_copy[sizeof(ssids_copy) - 1] = '\0';
-
-    // Count number of SSIDs for allocation
-    int ssid_count = 1; // Start at 1 for first SSID
-    for (int i = 0; ssids_copy[i]; i++) {
-        if (ssids_copy[i] == ',')
-            ssid_count++;
-    }
-
-    char **ssid_set = malloc(ssid_count * sizeof(char *));
-    if (!ssid_set) {
-        syslog(LOG_ERR, "Failed to allocate memory for SSID set\n");
-        return -1;
-    }
-
-    int ssid_idx = 0;
-    char *token = strtok(ssids_copy, ",");
-    while (token) {
-        ssid_set[ssid_idx++] = token;
-        token = strtok(NULL, ",");
-    }
-
-    // Execute iwinfo command and capture output
-    FILE *pipe = popen("iwinfo | grep wlan -A1 | grep -v \"^--\" | tr -d '\"' "
-                       "| awk '/wlan/ {name=$1; essid=$3} /Access Point/ "
-                       "{print name \"=\" essid \",\" $3}' | tr -d ':'",
-                       "r");
-    if (!pipe) {
-        syslog(LOG_ERR, "Failed to execute iwinfo command\n");
-        free(ssid_set);
-        return -1;
-    }
-
-    char line[256];
-    while (fgets(line, sizeof(line), pipe) != NULL) {
-        // Remove trailing newline
-        line[strcspn(line, "\n")] = 0;
-
-        // Parse line format: wlanX=SSID,BSSID
-        char *iface = strtok(line, "=");
-        char *rest = strtok(NULL, "=");
-        if (!iface || !rest)
-            continue;
-
-        char *essid = strtok(rest, ",");
-        char *bssid = strtok(NULL, ",");
-        if (!essid || !bssid)
-            continue;
-
-        // Check if this SSID is in our provided set
-        int match = 0;
-        for (int i = 0; i < ssid_idx; i++) {
-            if (strcmp(essid, ssid_set[i]) == 0) {
-                match = 1;
-                break;
-            }
-        }
-
-        if (!match)
-            continue;
-
-        // Add matching interface to iface_map
-        if (iface_count >= MAX_INTERFACES) {
-            syslog(LOG_ERR, "Too many matching interfaces, max is %d\n",
-                   MAX_INTERFACES);
-            pclose(pipe);
-            free(ssid_set);
-            return -1;
-        }
-
-        iface_map =
-            realloc(iface_map, (iface_count + 1) * sizeof(struct iface_info));
-        if (!iface_map) {
-            syslog(LOG_ERR, "Failed to reallocate iface_map\n");
-            pclose(pipe);
-            free(ssid_set);
-            return -1;
-        }
-
-        struct iface_info *info = &iface_map[iface_count];
-        info->serial = iface_count + 1;
-
-        strncpy(info->iface, iface, LEN_IFACE);
-        info->iface[LEN_IFACE] = '\0';
-
-        strncpy(info->essid, essid, LEN_ESSID);
-        info->essid[LEN_ESSID] = '\0';
-
-        strncpy(info->bssid, bssid, LEN_BSSID);
-        info->bssid[LEN_BSSID] = '\0';
-
-        iface_count++;
-    }
-
-    int pipe_status = pclose(pipe);
-    if (pipe_status == -1) {
-        syslog(LOG_ERR, "Error closing iwinfo pipe: %s\n", strerror(errno));
-    }
-
-    free(ssid_set);
-
-    if (iface_count == 0) {
-        syslog(LOG_ERR, "No matching interfaces found for provided SSIDs\n");
-        return -1;
-    }
-
-    if (iface_count != total_iface) {
-        syslog(LOG_ERR, "Expect %d but only %d interfaces were found.\n", total_iface, iface_count);
-        return -1;
-    }
-
-    syslog(LOG_INFO, "Found %d matching interfaces\n", iface_count);
-    return 0;
-}
-
-int parse_ports(const char *port_list) {
-    if (ports) {
-        for (int i = 0; i < port_count; i++) {
-            if (ports[i].sock >= 0) {
-                close(ports[i].sock);
-            }
-        }
-        free(ports);
-        ports = NULL;
-        port_count = 0;
-    }
-
-    char ports_copy[256];
-    strncpy(ports_copy, port_list, sizeof(ports_copy) - 1);
-    ports_copy[sizeof(ports_copy) - 1] = '\0';
-
-    port_count = 1;
-    for (int i = 0; ports_copy[i]; i++) {
-        if (ports_copy[i] == ',') {
-            port_count++;
-        }
-    }
-
-    if (port_count > MAX_PORTS) {
-        syslog(LOG_ERR, "Too many ports specified, maximum is %d\n", MAX_PORTS);
-        return -1;
-    }
-
-    ports = calloc(port_count, sizeof(struct port_info));
-    if (!ports) {
-        syslog(LOG_ERR, "Failed to allocate memory for ports\n");
-        return -1;
-    }
-
-    char *token = strtok(ports_copy, ",");
-    int idx = 0;
-    while (token && idx < port_count) {
-        strncpy(ports[idx].name, token, LEN_IFACE);
-        ports[idx].name[LEN_IFACE] = '\0';
-
-        ports[idx].sock = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
-        if (ports[idx].sock < 0) {
-            syslog(LOG_ERR, "Socket creation failed for %s: %s\n",
-                   ports[idx].name, strerror(errno));
-            return -1;
-        }
-
-        ports[idx].ifindex = if_nametoindex(ports[idx].name);
-        if (ports[idx].ifindex == 0) {
-            syslog(LOG_ERR, "Failed to get interface index for %s: %s\n",
-                   ports[idx].name, strerror(errno));
-            return -1;
-        }
-
-        token = strtok(NULL, ",");
-        idx++;
-    }
-
-    syslog(LOG_INFO, "Configured %d ports for forwarding\n", port_count);
-    return 0;
-}
-
-int setup_tc() {
-    char cmd[1024];
 
+    // check if ifb-inject exists, if not create it
     snprintf(cmd, sizeof(cmd), "ip link show ifb-inject >/dev/null 2>&1");
-    if (system(cmd) != 0) {
+    if (system(cmd) != 0)
+    {
         snprintf(cmd, sizeof(cmd),
                  "ip link add name ifb-inject type ifb && ip link set "
                  "ifb-inject up");
-        if (system(cmd) != 0) {
+        if (system(cmd) != 0)
+        {
             syslog(LOG_ERR, "Failed to setup ifb-inject\n");
             return -1;
         }
     }
 
-    for (int i = 0; i < iface_count; i++) {
+    for (int i = 0; i < iface_map_size; i++)
+    {
         snprintf(cmd, sizeof(cmd), "tc qdisc add dev %s ingress 2>/dev/null 1>2",
-            iface_map[i].iface);
+                 iface_map[i].iface);
         int result = system(cmd);
-        if (result == 2) {
+        if (result == 2)
+        {
             syslog(LOG_INFO, "Ingress qdisc already exists for %s\n", iface_map[i].iface);
         }
-        else if (result == 1) {
+        else if (result == 1)
+        {
             syslog(LOG_ERR, "Failed to add qdisc for %s\n", iface_map[i].iface);
             return -1;
         }
@@ -300,7 +95,8 @@ int setup_tc() {
                  "action mirred egress mirror dev ifb-inject pipe "
                  "action drop",
                  iface_map[i].iface, iface_map[i].serial);
-        if (system(cmd) != 0) {
+        if (system(cmd) != 0)
+        {
             syslog(LOG_ERR, "Failed to setup tc for %s\n", iface_map[i].iface);
             return -1;
         }
@@ -308,82 +104,172 @@ int setup_tc() {
     return 0;
 }
 
-// Signal handler
+int parse_iwinfo_by_essid(struct iface_info *iface)
-void signal_handler(int sig) {
+{
-    if (sig == SIGTERM) {
+    char cmd[256];
-        syslog(LOG_INFO, "Received SIGTERM, cleaning up...\n");
+    FILE *fp;
-        cleanup();
+    char output[128];
-        exit(0);
+    char *line;
-    } else if (sig == SIGHUP) {
-        syslog(LOG_INFO, "Received reload signal, reconfiguring...\n");
-        // Clean up existing resources
-        cleanup_tc();
 
-        // Free old SSIDs and get new ones
+    snprintf(cmd, sizeof(cmd), IWINFO_CMD, iface->essid, iface->frequency);
-        if (provided_ssids) {
-            free(provided_ssids);
-        }
-        provided_ssids = getenv("SSIDs");
-        if (!provided_ssids) {
-            syslog(LOG_ERR, "No SSIDs provided on reload\n");
-            return;
-        }
 
-        // Reload SSIDs
+    fp = popen(cmd, "r");
-        if (parse_ssids(provided_ssids) != 0) {
+    if (fp == NULL)
-            syslog(LOG_ERR, "Failed to reload SSIDs configuration\n");
+    {
-            return;
+        syslog(LOG_ERR, "Failed to execute command: %s\n", cmd);
-        }
+        return 1;
+    }
 
-        // Free old ports and get new ones
+    // Read the first line (interface name)
-        if (provided_ports) {
+    line = fgets(output, sizeof(output), fp);
-            free(provided_ports);
+    if (line)
-        }
+    {
-        provided_ports = getenv("PORTs");
+        output[strcspn(output, "\n")] = '\0'; // Remove trailing newline
-        if (!provided_ports) {
+        snprintf(iface->iface, LEN_IFACE + 1, output);
-            syslog(LOG_ERR, "No PORTs provided on reload\n");
+    }
-            return;
+    else
-        }
+    {
+        return 1;
+    }
 
-        // Close existing sockets and reopen with new config
+    // Read the second line (BSSID)
-        if (ports) {
+    line = fgets(output, sizeof(output), fp);
-            for (int i = 0; i < port_count; i++) {
+    if (line)
-                if (ports[i].sock >= 0) {
+    {
-                    close(ports[i].sock);
+        output[strcspn(output, "\n")] = '\0'; // Remove trailing newline
+        snprintf(iface->bssid, LEN_BSSID + 1, output);
+    }
+    else
+    {
+        return 1;
+    }
+
+    // Close the pipe
+    pclose(fp);
+    return 0;
+}
+
+void add_iface_info(const char *essid, const char *upstream, const char *freq, int serial)
+{
+    iface_map = realloc(iface_map, (iface_map_size + 1) * sizeof(struct iface_info));
+    if (!iface_map)
+    {
+        syslog(LOG_ERR, "Memory allocation failed\n");
+        exit(1);
+    }
+    struct iface_info *info = &iface_map[iface_map_size];
+    memset(info, 0, sizeof(struct iface_info));
+    // use snprintf to copy essid to info->essid
+    snprintf(info->essid, LEN_ESSID + 1, essid);
+    snprintf(info->upstream, LEN_IFACE + 1, upstream);
+    snprintf(info->frequency, 2, freq);
+    info->serial = serial;
+    iface_map_size++;
+}
+
+int parse_uci_config()
+{
+    struct uci_context *ctx = uci_alloc_context();
+    if (!ctx)
+    {
+        syslog(LOG_ERR, "Failed to allocate UCI context\n");
+        return 1;
+    }
+
+    struct uci_package *pkg = NULL;
+    if (uci_load(ctx, CONFIG_PATH, &pkg) != UCI_OK)
+    {
+        syslog(LOG_ERR, "Failed to load UCI config\n");
+        uci_free_context(ctx);
+        return 1;
+    }
+
+    int serial = 1;
+    struct uci_element *e;
+    uci_foreach_element(&pkg->sections, e)
+    {
+        struct uci_section *s = uci_to_section(e);
+        if (!strcmp(s->type, "network"))
+        {
+            const char *upstream = uci_lookup_option_string(ctx, s, "upstream");
+            if (!upstream)
+                continue;
+            syslog(LOG_INFO, "Processing ssids with upstream %s", upstream);
+            struct uci_option *opt, *opt2;
+
+            opt = uci_lookup_option(ctx, s, "freq");
+            if (opt && opt->type == UCI_TYPE_LIST)
+            {
+                struct uci_element *i;
+                char *freq_type = NULL;
+                uci_foreach_element(&opt->v.list, i)
+                {
+                    // parse 6G ifaces
+                    if (!strcmp(i->name, "6G"))
+                    {
+                        opt2 = uci_lookup_option(ctx, s, "ssid6G");
+                        freq_type = "6";
+                    }
+                    // parse 5G ifaces
+                    else if (!strcmp(i->name, "5G"))
+                    {
+                        opt2 = uci_lookup_option(ctx, s, "ssid5G");
+                        freq_type = "5";
+                    }
+                    // parse 2G ifaces
+                    else if (!strcmp(i->name, "2G"))
+                    {
+                        opt2 = uci_lookup_option(ctx, s, "ssid2G");
+                        freq_type = "2";
+                    }
+
+                    if (opt2 && opt2->type == UCI_TYPE_LIST)
+                    {
+                        struct uci_element *i;
+                        uci_foreach_element(&opt2->v.list, i)
+                        {
+                            add_iface_info(i->name, upstream, freq_type, serial++);
+                        }
+                    }
                 }
             }
-            free(ports);
-            ports = NULL;
-            port_count = 0;
-        }
 
-        // Reload ports
+            // initialize socket to upstream interface, say "up0v0"
-        if (parse_ports(provided_ports) != 0) {
+            port_map = realloc(port_map, (port_map_size + 1) * sizeof(struct port_info));
-            syslog(LOG_ERR, "Failed to reload ports configuration\n");
+            int sock = socket(AF_PACKET, SOCK_RAW, 0);
-            return;
+            if (sock < 0)
-        }
+            {
+                syslog(LOG_ERR, "Failed to create socket for %s\n", upstream);
+                continue;
+            }
 
-        // Reapply tc rules
+            // Get interface index
-        if (setup_tc() == 0) {
+            int ifindex = if_nametoindex(upstream);
-            syslog(LOG_INFO, "Reloaded with SSIDs: %s and Ports: %s\n",
+            if (ifindex == 0)
-                   provided_ssids, provided_ports);
+            {
-        } else {
+                syslog(LOG_ERR, "Failed to get ifindex for %s\n", upstream);
-            syslog(LOG_ERR, "Failed to reload tc configuration\n");
+                close(sock);
+            }
+
+            // Store in port_map
+            snprintf(port_map[port_map_size].name, LEN_IFACE + 1, upstream);
+            port_map[port_map_size].sock = sock;
+            port_map[port_map_size].ifindex = ifindex;
+            port_map_size++;
+            syslog(LOG_INFO, "Initialized socket for upstream interface %s", upstream);
         }
     }
+
+    uci_free_context(ctx);
+    return 0;
 }
 
-char *get_hostname() {
+struct iface_info *find_iface_info_by_vlan(int vlan_id)
-    static char hostname[256];
+{
-    if (gethostname(hostname, sizeof(hostname)) != 0) {
+    for (int i = 0; i < iface_map_size; i++)
-        strcpy(hostname, "unknown");
+    {
-    }
+        if (iface_map[i].serial == vlan_id)
-    return hostname;
+        {
-}
-
-struct iface_info *find_iface_info_by_vlan(int vlan_id) {
-    for (int i = 0; i < iface_count; i++) {
-        if (iface_map[i].serial == vlan_id) {
             return &iface_map[i];
         }
     }
@@ -391,13 +277,15 @@ struct iface_info *find_iface_info_by_vlan(int vlan_id) {
 }
 
 void process_packet(unsigned char *user, const struct pcap_pkthdr *header,
-                    const unsigned char *packet) {
+                    const unsigned char *packet)
+{
     int orig_len = header->len;
     struct ethhdr *eth = (struct ethhdr *)packet;
     int vlan_id = -1;
     int eth_offset = sizeof(struct ethhdr);
 
-    if (ntohs(eth->h_proto) != ETH_P_8021Q) {
+    if (ntohs(eth->h_proto) != ETH_P_8021Q)
+    {
         syslog(LOG_DEBUG,
                "No VLAN header found in packet (EtherType: 0x%04x)\n",
                ntohs(eth->h_proto));
@@ -409,11 +297,14 @@ void process_packet(unsigned char *user, const struct pcap_pkthdr *header,
     eth_offset += sizeof(struct vlan_hdr);
 
     struct iface_info *info = find_iface_info_by_vlan(vlan_id);
-    if (!info) {
+    if (!info)
+    {
         syslog(LOG_ERR, "No interface info found for VLAN ID %d\n", vlan_id);
         return;
     }
 
+    syslog(LOG_INFO, "Received dhcp packet with vlan id %d from iface %s of length: %d", vlan_id, info->iface, header->len);
+
     char *hostname = get_hostname();
     int circuit_id_len = strlen(info->bssid) + 1 + strlen(info->essid);
     int remote_id_len = strlen(hostname);
@@ -429,13 +320,16 @@ void process_packet(unsigned char *user, const struct pcap_pkthdr *header,
     int dhcp_len = ntohs(udp->len) - sizeof(struct udphdr);
 
     int options_end = -1;
-    for (int i = dhcp_len - 1; i >= 0; i--) {
+    for (int i = dhcp_len - 1; i >= 0; i--)
-        if (dhcp_start[i] == 0xFF) { // End option
+    {
+        if (dhcp_start[i] == 0xFF)
+        { // End option
             options_end = i;
             break;
         }
     }
-    if (options_end == -1) {
+    if (options_end == -1)
+    {
         syslog(LOG_DEBUG, "Could not find DHCP options end tag\n");
         return;
     }
@@ -445,7 +339,8 @@ void process_packet(unsigned char *user, const struct pcap_pkthdr *header,
     int orig_options_len = options_end;
     int new_len = orig_len - 4 - 1 + opt82_len + 1;
     unsigned char *new_packet = malloc(new_len);
-    if (!new_packet) {
+    if (!new_packet)
+    {
         syslog(LOG_ERR, "Failed to allocate memory for new packet\n");
         return;
     }
@@ -501,10 +396,12 @@ void process_packet(unsigned char *user, const struct pcap_pkthdr *header,
     new_ip->check = 0;
     unsigned int sum = 0;
     unsigned short *ip_ptr = (unsigned short *)new_ip;
-    for (int i = 0; i < ip->ihl * 2; i++) {
+    for (int i = 0; i < ip->ihl * 2; i++)
+    {
         sum += *ip_ptr++;
     }
-    while (sum >> 16) {
+    while (sum >> 16)
+    {
         sum = (sum & 0xFFFF) + (sum >> 16);
     }
     new_ip->check = ~sum;
@@ -524,13 +421,16 @@ void process_packet(unsigned char *user, const struct pcap_pkthdr *header,
     unsigned char *udp_start = (unsigned char *)new_udp;
     int udp_total_len = ntohs(new_udp->len);
     unsigned short *udp_ptr = (unsigned short *)udp_start;
-    for (int i = 0; i < udp_total_len / 2; i++) {
+    for (int i = 0; i < udp_total_len / 2; i++)
+    {
         sum += *udp_ptr++;
     }
-    if (udp_total_len % 2) {
+    if (udp_total_len % 2)
+    {
         sum += *(unsigned char *)udp_ptr;
     }
-    while (sum >> 16) {
+    while (sum >> 16)
+    {
         sum = (sum & 0xFFFF) + (sum >> 16);
     }
     new_udp->check = ~sum;
@@ -542,92 +442,91 @@ void process_packet(unsigned char *user, const struct pcap_pkthdr *header,
     socket_address.sll_family = AF_PACKET;
     socket_address.sll_protocol = htons(ETH_P_ALL);
 
-    for (int i = 0; i < port_count; i++) {
+    for (int i = 0; i < port_map_size; i++)
-        socket_address.sll_ifindex = ports[i].ifindex;
+    {
-        
+        if (!strcmp(info->upstream, port_map[i].name))
-        if (sendto(ports[i].sock, new_packet, new_len, 0,
+        {
-                  (struct sockaddr *)&socket_address,
+            socket_address.sll_ifindex = port_map[i].ifindex;
-                  sizeof(socket_address)) < 0) {
+            if (sendto(port_map[i].sock, new_packet, new_len, 0, (struct sockaddr *)&socket_address,
-            syslog(LOG_ERR, "Failed to send packet to %s: %s\n",
+                       sizeof(socket_address)) < 0)
-                   ports[i].name, strerror(errno));
+            {
-        } else {
+                syslog(LOG_ERR, "Failed to send packet to %s: %s\n",
-            syslog(LOG_DEBUG,
+                       info->upstream, strerror(errno));
-                   "Successfully forwarded packet to %s (new length: %d)\n",
+            }
-                   ports[i].name, new_len);
+            else
+            {
+                syslog(LOG_INFO,
+                       "Successfully forwarded packet to %s (new length: %d)\n",
+                       info->upstream, new_len);
+            }
+            break;
         }
     }
 
     free(new_packet);
 }
 
-int main(int argc, char *argv[]) {
+void signal_handler(int sig)
+{
+    switch (sig)
+    {
+    case SIGTERM:
+    case SIGHUP:
+        cleanup();
+        break;
+    default:
+        break;
+    }
+}
+
+int main(int argc, char *argv[])
+{
     openlog("dhcp_inject:", LOG_PID | LOG_CONS, LOG_DAEMON);
 
     signal(SIGTERM, signal_handler);
     signal(SIGHUP, signal_handler);
 
-    // Read IFACEs from environment variable
+    if (parse_uci_config() != 0)
-    char *iface_env = getenv("IFACEs");
+    {
-    if (!iface_env) {
+        syslog(LOG_ERR, "Failed to parse UCI configuration\n");
-        syslog(LOG_ERR, "No IFACEs provided. Exiting...\n");
-        cleanup();
-        return 1;
-    }
-    total_iface = atoi(iface_env);
-    if (total_iface <= 0) {
-        syslog(LOG_ERR, "Invalid IFACEs value: %s. Exiting...\n", iface_env);
         cleanup();
         return 1;
     }
 
-    provided_ssids = getenv("SSIDs");
+    for (int i = 0; i < iface_map_size; i++)
-    syslog(LOG_INFO, "Provided SSIDs: %s\n", provided_ssids);
+    {
-    if (!provided_ssids && argc > 1) {
+        if (parse_iwinfo_by_essid(&iface_map[i]) != 0)
-        provided_ssids = strdup(argv[1]);
+        {
-    }
+            syslog(LOG_ERR, "Failed to get iface info for ESSID: %s\n", iface_map[i].essid);
-    if (!provided_ssids) {
+            cleanup();
-        syslog(LOG_ERR, "No SSIDs provided. Exiting...\n");
+            return 1;
-        return 1;
+        }
+        else
+        {
+            syslog(LOG_INFO, "iface_info[%d]: iface='%s', freq='%s', essid='%s', bssid='%s', upstream='%s', serial=%d\n",
+                   i, iface_map[i].iface, iface_map[i].frequency, iface_map[i].essid, iface_map[i].bssid,
+                   iface_map[i].upstream, iface_map[i].serial);
+        }
     }
 
-    provided_ports = getenv("PORTs");
+    if (setup_tc() != 0)
-    syslog(LOG_INFO, "Provided PORTs: %s\n", provided_ports);
+    {
-    if (!provided_ports) {
-        syslog(LOG_ERR, "No PORTs provided. Exiting...\n");
-        cleanup();
-        return 1;
-    }
-
-    if (parse_ssids(provided_ssids) != 0) {
-        syslog(LOG_ERR, "Failed to parse SSIDs\n");
-        cleanup();
-        return 1;
-    }
-
-    if (parse_ports(provided_ports) != 0) {
-        syslog(LOG_ERR, "Failed to parse ports\n");
-        cleanup();
-        return 1;
-    }
-
-    if (setup_tc() != 0) {
         syslog(LOG_ERR, "Setup failed\n");
         cleanup();
         return 1;
     }
 
-    syslog(LOG_INFO, "Setup complete for SSIDs: %s and Ports: %s\n",
-           provided_ssids, provided_ports);
-
     char errbuf[PCAP_ERRBUF_SIZE];
     handle = pcap_open_live("ifb-inject", BUFSIZ, 1, 1000, errbuf);
-    if (handle == NULL) {
+    if (handle == NULL)
+    {
         syslog(LOG_ERR, "Couldn't open device ifb-inject: %s\n", errbuf);
         cleanup();
         return 1;
     }
 
-    if (pcap_loop(handle, -1, process_packet, NULL) < 0) {
+    if (pcap_loop(handle, -1, process_packet, NULL) < 0)
+    {
         syslog(LOG_ERR, "pcap_loop failed: %s\n", pcap_geterr(handle));
         cleanup();
         return 1;

feeds/ucentral/udhcpinject/src/udhcpinject.h

@@ -1,9 +1,27 @@
 #include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
 #include <netinet/in.h>
 
 #define LEN_ESSID 32
 #define LEN_BSSID 12
 #define LEN_IFACE 15
+#define LEN_FREQ 3
+
+#define MAX_INTERFACES 48
+#define MAX_PORTS 8
+
+#define CONFIG_PATH "/etc/config/dhcpinject"
+
+#define IWINFO_CMD "iwinfo | grep %s -A2 | grep '.*Channel:.*\\(%s\\..*\\) GHz' -B2 | awk '/ESSID/{print $1} /Access Point/{gsub(/:/, \"\", $3); print $3}'"
+
+static pcap_t 		*handle = NULL;
+
+static int 			 iface_map_size = 0;
+struct iface_info 	*iface_map = NULL;
+static int 			 port_map_size = 0;
+struct port_info 	*port_map = NULL;
 
 // DHCP header structure
 struct dhcp_packet {
@@ -25,11 +43,15 @@ struct dhcp_packet {
 	uint8_t options[];
 };
 
+// up4094v4094
+
 // Structure to hold interface info
 struct iface_info {
     char iface[LEN_IFACE + 1];
     char essid[LEN_ESSID + 1];
     char bssid[LEN_BSSID + 1];
+	char upstream[LEN_IFACE + 1];
+	char frequency[4];
     int serial;
 };
 
@@ -41,6 +63,14 @@ struct port_info {
 
 // VLAN header structure
 struct vlan_hdr {
-    __be16 h_vlan_TCI;              // VLAN Tag Control Information
+    __be16 h_vlan_TCI;                // VLAN Tag Control Information
     __be16 h_vlan_encapsulated_proto; // Encapsulated protocol
 };
+
+char *get_hostname() {
+    static char hostname[256];
+    if (gethostname(hostname, sizeof(hostname)) != 0) {
+        strcpy(hostname, "unknown");
+    }
+    return hostname;
+}

patches/0058-ramips-mt7621-add-mt7621-indio-um-305ax.patch

@@ -1,16 +1,22 @@
-From ec135e7aefac08806fbabb0634a2bd88a169dfc6 Mon Sep 17 00:00:00 2001
+From 937c4ba769b4d3a0b5cb804e54fd8bece8efac47 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
+From: Shubham Vishwakarma <shubhamvis98@fossfrog.in>
-Date: Sat, 15 Jul 2023 15:25:59 +0200
+Date: Mon, 29 Sep 2025 10:35:54 +0530
-Subject: [PATCH 58/68] ramips: add mt7621_indio_um-305ax
+Subject: [PATCH 58/68] ramips: mt7621: add mt7621 indio um-305ax
 
-Signed-off-by: John Crispin <john@phrozen.org>
+Changelog:
+- Fix MAC address assignment for Ethernet ports
+- Fix Ethernet port configuration (was not working in the current DTS
+  because GPIOs 23 and 24, used for LEDs, are RGMII2 pins)
+- Add package kmod-7915-firmware to enable Wi-Fi
+
+Signed-off-by: Shubham Vishwakarma <shubhamvis98@fossfrog.in>
 ---
  target/linux/ath79/image/generic.mk           |  22 +--
- .../ramips/dts/mt7621_indio_um-305ax.dts      | 146 ++++++++++++++++++
+ .../ramips/dts/mt7621_indio_um-305ax.dts      | 168 ++++++++++++++++++
  target/linux/ramips/image/mt7621.mk           |  11 ++
  .../mt7621/base-files/etc/board.d/02_network  |   6 +
  .../etc/hotplug.d/ieee80211/10_fix_wifi_mac   |   6 +
- 5 files changed, 180 insertions(+), 11 deletions(-)
+ 5 files changed, 202 insertions(+), 11 deletions(-)
  create mode 100644 target/linux/ramips/dts/mt7621_indio_um-305ax.dts
 
 diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
@@ -55,27 +61,30 @@ index 5882feafcb..a98a5e816f 100644
    DEVICE_VENDOR := YunCore
 diff --git a/target/linux/ramips/dts/mt7621_indio_um-305ax.dts b/target/linux/ramips/dts/mt7621_indio_um-305ax.dts
 new file mode 100644
-index 0000000000..79cffbdec2
+index 0000000000..42837dd9fe
 --- /dev/null
 +++ b/target/linux/ramips/dts/mt7621_indio_um-305ax.dts
-@@ -0,0 +1,146 @@
+@@ -0,0 +1,168 @@
 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2025, Shubham Vishwakarma <shubhamvis98@fossfrog.in>
++ */
++
++/dts-v1/;
 +
 +#include "mt7621.dtsi"
-+
 +#include <dt-bindings/gpio/gpio.h>
 +#include <dt-bindings/input/input.h>
 +
 +/ {
 +	compatible = "indio,um-305ax", "mediatek,mt7621-soc";
-+	model = "INDIO UM-305AX";
++	model = "Indio UM-305AX";
 +
 +	aliases {
 +		led-boot = &led_green;
-+		led-failsafe = &led_red;
++		led-failsafe = &led_green;
-+		led-running = &led_blue;
++		led-running = &led_green;
-+		led-upgrade = &led_red;
++		led-upgrade = &led_green;
-+		label-mac-device = &wan_port;
 +	};
 +
 +	chosen {
@@ -84,6 +93,11 @@ index 0000000000..79cffbdec2
 +	};
 +
 +	leds {
++		/*
++		* GPIO 23 and 24 LEDs won’t work because these pins are part of the RGMII2 pin group.
++		* To make the LEDs work, we need to change the &state_default node’s group variable
++		* to "rgmii2", which restores LED functionality but disables the Ethernet ports.
++		*/
 +		compatible = "gpio-leds";
 +
 +		led_blue: blue {
@@ -119,7 +133,7 @@ index 0000000000..79cffbdec2
 +
 +&state_default {
 +	gpio {
-+		groups = "rgmii2";
++		groups = "jtag", "wdt";
 +		function = "gpio";
 +	};
 +};
@@ -136,15 +150,19 @@ index 0000000000..79cffbdec2
 +};
 +
 +&gmac0 {
-+	mtd-mac-address = <&factory 0x4>;
++	status = "okay";
++	nvmem-cells = <&macaddr_offset>;
++	nvmem-cell-names = "mac-address";
 +};
 +
 +&switch0 {
 +	ports {
-+		wan_port: port@0 {
++		port@0 {
 +			status = "okay";
 +			label = "wan";
-+			mtd-mac-address = <&factory 0x28>;
++			nvmem-cells = <&macaddr_offset>;
++			nvmem-cell-names = "mac-address";
++			mac-address-increment = <1>;
 +		};
 +
 +		port@1 {
@@ -205,6 +223,16 @@ index 0000000000..79cffbdec2
 +	};
 +};
 +
++&factory {
++	compatible = "nvmem-cells";
++	#address-cells = <1>;
++	#size-cells = <1>;
++
++	macaddr_offset: macaddr@4 {
++		reg = <0x4 0x6>;
++	};
++};
++
 diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
 index 962d7ef440..8790a2fa50 100644
 --- a/target/linux/ramips/image/mt7621.mk
@@ -269,5 +297,5 @@ index 3467e783f0..d5bd50fdf7 100644
  		[ "$PHYNBR" = "1" ] && \
  			macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
 -- 
-2.34.1
+2.47.3
 

patches/0101-ipq53xx-add-KERNEL_IPQ_MEM_PROFILE.patch

@@ -0,0 +1,25 @@
+From 40894005e2c114664a44abb0ffadb1cb945a88e2 Mon Sep 17 00:00:00 2001
+From: Antonio Wu <antonio.wu@cybertan.com.tw>
+Date: Mon, 4 Aug 2025 05:10:41 +0000
+Subject: [PATCH] add KERNEL_IPQ_MEM_PROFILE for IPQ53XX 
+
+---
+ config/Config-kernel.in | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/config/Config-kernel.in b/config/Config-kernel.in
+index 3529696559..b7f13eccbe 100644
+--- a/config/Config-kernel.in
++++ b/config/Config-kernel.in
+@@ -6,7 +6,7 @@ config KERNEL_IPQ_MEM_PROFILE
+ 	int "Different memory profile "
+ 	range 0 1024
+ 	default 512
+-	depends on TARGET_ipq807x || TARGET_ipq60xx || TARGET_ipq50xx || TARGET_ipq95xx
++	depends on TARGET_ipq807x || TARGET_ipq60xx || TARGET_ipq50xx || TARGET_ipq95xx || TARGET_ipq53xx
+ 	help
+ 	  This option select memory profile to be used,which defines
+ 	  the reserved memory configuration used in device tree.
+-- 
+2.17.1
+

patches/0101-support-dhcp-opt138-opt224.patch

@@ -0,0 +1,68 @@
+From ba5c63cc0cbbacd952a5c2cfd873439bf5adc86a Mon Sep 17 00:00:00 2001
+From: Tanya Singh <tanya_singh@accton.com>
+Date: Thu, 18 Sep 2025 13:21:38 +0800
+Subject: [PATCH] netifd: Support DHCP option 138 and DHCP option 224
+
+---
+ .../netifd/files/lib/netifd/dhcp.script       | 10 ++++++++++
+ .../patches/601-dhcp_opt138_opt224.patch      | 20 +++++++++++++++++++
+ 2 files changed, 30 insertions(+)
+ create mode 100644 package/utils/busybox/patches/601-dhcp_opt138_opt224.patch
+
+diff --git a/package/network/config/netifd/files/lib/netifd/dhcp.script b/package/network/config/netifd/files/lib/netifd/dhcp.script
+index 6fcf139beb..9c4366f48b 100755
+--- a/package/network/config/netifd/files/lib/netifd/dhcp.script
++++ b/package/network/config/netifd/files/lib/netifd/dhcp.script
+@@ -4,6 +4,8 @@
+ . /lib/functions.sh
+ . /lib/netifd/netifd-proto.sh
+ 
++rm -rf /tmp/dhcp-option-*
++
+ set_classless_routes() {
+ 	local max=128
+ 	while [ -n "$1" -a -n "$2" -a $max -gt 0 ]; do
+@@ -111,6 +113,14 @@ case "$1" in
+ 	;;
+ esac
+ 
++if [ -n "${opt138}" ]; then
++	echo -n "${opt138}" > /tmp/dhcp-option-138
++fi
++
++if [ -n "${opt224}" ]; then
++	echo -n "${opt224}" > /tmp/dhcp-option-224
++fi
++
+ # user rules
+ [ -f /etc/udhcpc.user ] && . /etc/udhcpc.user "$@"
+ for f in /etc/udhcpc.user.d/*; do
+diff --git a/package/utils/busybox/patches/601-dhcp_opt138_opt224.patch b/package/utils/busybox/patches/601-dhcp_opt138_opt224.patch
+new file mode 100644
+index 0000000000..38e53be78c
+--- /dev/null
++++ b/package/utils/busybox/patches/601-dhcp_opt138_opt224.patch
+@@ -0,0 +1,20 @@
++--- a/networking/udhcp/common.c	2025-09-18 13:15:38.313248300 +0800
+++++ b/networking/udhcp/common.c	2025-09-18 13:17:50.078418978 +0800
++@@ -55,6 +55,8 @@ const struct dhcp_optflag dhcp_optflags[
++ 	{ OPTION_STRING                           , 0x43 }, /* DHCP_BOOT_FILE     */
++ //TODO: not a string, but a set of LASCII strings:
++ //	{ OPTION_STRING                           , 0x4D }, /* DHCP_USER_CLASS    */
+++	{ OPTION_IP								  , 0x8A }, /* DHCP_OPT138        */
+++	{ OPTION_STRING		          			  , 0xE0 }, /* DHCP_OPT224        */
++ 	{ OPTION_STRING                           , 0x64 }, /* DHCP_PCODE         */
++ 	{ OPTION_STRING                           , 0x65 }, /* DHCP_TCODE         */
++ #if ENABLE_FEATURE_UDHCP_RFC3397
++@@ -124,6 +126,8 @@ const char dhcp_option_strings[] ALIGN1
++ 	"tftp" "\0"             /* DHCP_TFTP_SERVER_NAME*/
++ 	"bootfile" "\0"         /* DHCP_BOOT_FILE       */
++ //	"userclass" "\0"        /* DHCP_USER_CLASS      */
+++	"opt138" "\0"           /* DHCP_OPT138          */
+++	"opt224" "\0"           /* DHCP_OPT224          */
++ 	"tzstr" "\0"            /* DHCP_PCODE           */
++ 	"tzdbstr" "\0"          /* DHCP_TCODE           */
++ #if ENABLE_FEATURE_UDHCP_RFC3397
+-- 
+2.34.1
+

profiles/cig_wf189.yml

@@ -16,3 +16,5 @@ packages:
   - iperf3
   - sysstat
   - kmod-cig-poe-judgment
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/cig_wf189h.yml

@@ -15,3 +15,5 @@ packages:
   - iperf3
   - sysstat
   - kmod-cig-poe-judgment
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/cig_wf189w.yml

@@ -15,3 +15,5 @@ packages:
   - iperf3
   - sysstat
   - kmod-cig-poe-judgment
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/cig_wf672.yml

@@ -24,5 +24,6 @@ packages:
   - kmod-iio-ilps22qs
   - kmod-cig-poe-judgment 
 diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0
   CONFIG_BUSYBOX_CUSTOM=y
   CONFIG_BUSYBOX_CONFIG_STTY=y

profiles/edgecore_eap105.yml

@@ -12,3 +12,5 @@ include:
 packages:
   - ipq53xx
   - qca-ssdk-shell
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/indio_um-335ax.yml

@@ -0,0 +1,18 @@
+---
+profile: indio_um-335ax
+target: ipq50xx
+subtarget: generic
+description: Build image for the Indio um-335ax
+image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-indio_um-335ax-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq50xx
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=512
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_STTY=y
+

profiles/indio_um-525axm.yml

@@ -0,0 +1,17 @@
+---
+profile: indio_um-525axm
+target: ipq50xx
+subtarget: generic
+description: Build image for the Indio um-525axm
+image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-indio_um-525axm-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq50xx
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=512
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_STTY=y  

profiles/sonicfi_rap7110c-341x.yml

@@ -13,3 +13,5 @@ packages:
   - ipq53xx
   - qca-ssdk-shell
   - e2fsprogs
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

setup.py

@@ -87,7 +87,7 @@ def setup_tree():
 		for patch in patches:
 			run(["git", "am", "-3", str(base_dir / patch)], check=True)
 		run(
-			["ln", "-s", profiles, "profiles"], check=True,
+			["ln", "-rs", profiles, "profiles"], check=True,
 		)
 		print("### Patches done")
 	except: