Merge pull request #960 from Telecominfraproject/main

ucentral-schema: update to latest HEAD

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -49,7 +49,6 @@ ALLWIFIBOARDS:= \
 	indio-um-510axm-v1 \
 	indio-um-325ax-v2 \
 	indio-um-335ax \
-	indio-um-345ax \
 	indio-um-525axp \
 	indio-um-525axm \
 	muxi-ap3220l \
@@ -448,7 +447,6 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-325ax-v2,Indio UM-325AX V2))
 $(eval $(call generate-ath11k-wifi-package,indio-um-335ax,Indio UM-335AX))
-$(eval $(call generate-ath11k-wifi-package,indio-um-345ax,Indio UM-345AX))
 $(eval $(call generate-ath11k-wifi-package,indio-um-525axp,Indio UM-525AXP))
 $(eval $(call generate-ath11k-wifi-package,indio-um-525axm,Indio UM-525AXM))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))

feeds/ipq807x_v5.4/ipq50xx/Makefile

@@ -27,7 +27,6 @@ DEFAULT_PACKAGES += kmod-qca-nss-dp kmod-qca-ssdk swconfig \
 	kmod-ath11k-ahb  ath11k-firmware-ipq5018 \
 	kmod-gpio-button-hotplug iwinfo \
 	qca-ssdk-shell kmod-bootconfig \
-	uboot-envtools -procd-ujail \
+	uboot-envtools -procd-ujail
-	kmod-mdio-qca
 
 $(eval $(call BuildTarget))

feeds/ipq807x_v5.4/ipq50xx/config-5.4

@@ -635,7 +635,7 @@ CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_BOARDINFO=y
 # CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
 CONFIG_MDIO_GPIO=y
-CONFIG_MDIO_QCA=m
+CONFIG_MDIO_QCA=y
 # CONFIG_MDM_GCC_9615 is not set
 # CONFIG_MDM_LCC_9615 is not set
 # CONFIG_MEMORY_HOTPLUG is not set

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-eww631-b1.dts

@@ -391,8 +391,8 @@
 				mdio-bus = <&mdio1>;
 				reset_gpio = <&tlmm 0x26 0>;
 				switch_cpu_bmp = <0x40>;  /* cpu port bitmap (Port 6 GMAC) */
-				switch_lan_bmp = <0x1c>; /* lan port bitmap */
+				switch_lan_bmp = <0x3c>; /* lan port bitmap */
-				switch_wan_bmp = <0x20>;  /* wan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
 				qca,ar8327-initvals = <
 						0x00004 0x7600000   /* PAD0_MODE */
 						0x00008 0x1000000   /* PAD5_MODE */

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-311g.dts

@@ -408,8 +408,8 @@
 				mdio-bus = <&mdio1>;
 				reset_gpio = <&tlmm 0x26 0>;
 				switch_cpu_bmp = <0x40>;  /* cpu port bitmap (Port 6 GMAC) */
-				switch_lan_bmp = <0x1c>; /* lan port bitmap */
+				switch_lan_bmp = <0x3c>; /* lan port bitmap */
-				switch_wan_bmp = <0x20>;  /* wan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
 				qca,ar8327-initvals = <
 						0x00004 0x7600000   /* PAD0_MODE */
 						0x00008 0x1000000   /* PAD5_MODE */

feeds/ipq807x_v5.4/ipq50xx/modules.mk

@@ -242,17 +242,3 @@ define KernelPackage/bootconfig/description
 endef
 
 $(eval $(call KernelPackage,bootconfig))
-
-define KernelPackage/mdio-qca
-  SUBMENU:=$(NETWORK_DEVICES_MENU)
-  TITLE:=Model for MDIO to QCA PHY connection
-  KCONFIG:=CONFIG_MDIO_QCA
-  FILES:=$(LINUX_DIR)/drivers/net/phy/mdio-qca.ko
-  AUTOLOAD:=$(call AutoLoad,30,mdio-qca)
-endef
-
-define KernelPackage/mdio-qca/description
- This driver supports the MDIO interface found in Qualcomm Atheros ipq Soc chip.
-endef
-
-$(eval $(call KernelPackage,mdio-qca))

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/02_network

@@ -20,7 +20,6 @@ qcom_setup_interfaces()
 		ucidef_set_interface_wan "eth0 eth1"
 		ucidef_set_interface_lan ""
 		;;
-	indio,um-310ax-v1|\
 	yuncore,ax840)
 		ucidef_set_interface_lan "eth0"
 		ucidef_set_interface_wan "eth1"
@@ -80,7 +79,6 @@ qcom_setup_macs()
 	emplus,wap386v2)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		;;
-	indio,um-310ax-v1|\
 	yuncore,ax840)
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -82,7 +82,6 @@ case "$FIRMWARE" in
 	hfcl,ion4x_2|\
 	hfcl,ion4x_3|\
 	hfcl,ion4xe|\
-	indio,um-310ax-v1|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	yuncore,ax840|\

feeds/ipq807x_v5.4/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -119,7 +119,6 @@ platform_check_image() {
 	cig,wf196|\
 	glinet,ax1800|\
 	glinet,axt1800|\
-	indio,um-310ax-v1|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
@@ -157,7 +156,6 @@ platform_do_upgrade() {
 		;;
 	glinet,ax1800|\
 	glinet,axt1800|\
-	indio,um-310ax-v1|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	yuncore,ax840|\

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-indio-um-310ax-v1.dts

@@ -1,321 +0,0 @@
-/dts-v1/;
-/*
- * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq6018.dtsi"
-#include "ipq6018-cpr-regulator.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Indio UM-310AX V1";
-	compatible = "indio,um-310ax-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
-	interrupt-parent = <&intc>;
-	qcom,msm-id = <0x1A5 0x0>;
-
-	aliases {
-		/*
-		 * Aliases as required by u-boot
-		 * to patch MAC addresses
-		 */
-		ethernet0 = "/soc/dp2";
-		ethernet1 = "/soc/dp1";
-		led-boot = &led_system;
-		led-failsafe = &led_system;
-		led-running = &led_system;
-		led-upgrade = &led_system;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-		bootargs-append = " swiotlb=1";
-#else
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-#endif
-	};
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		wps_button {
-			pins = "gpio9";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_blue {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		led_green {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		led_red {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		rst_button {
-			pins = "gpio19";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-};
-
-&soc {
-	mdio@90000 {
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0>;
-		status = "ok";
-		phy0: ethernet-phy@0 {
-			reg = <3>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <4>;
-		};
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp =   <0x01>; /* cpu port bitmap */
-		switch_lan_bmp =   <0x10>; /* lan port bitmap */
-		switch_wan_bmp =   <0x20>; /* wan port bitmap */
-		switch_inner_bmp = <0x80>; /*inner port bitmap*/
-		switch_mac_mode =  <0x00>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-		qcom,port_phyinfo {
-			port@3 {
-				port_id = <0x04>;
-				phy_address = <0x03>;
-			};
-
-			port@4 {
-				port_id = <0x05>;
-				phy_address = <0x04>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <0x04>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0x00>;
-		local-mac-address = [00 00 00 00 00 00];
-		qcom,link-poll = <0x01>;
-		qcom,phy-mdio-addr = <0x03>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <0x05>;
-		reg = <0x3a001800 0x200>;
-		qcom,mactype = <0x00>;
-		local-mac-address = [00 00 00 00 00 00];
-		qcom,link-poll = <0x01>;
-		qcom,phy-mdio-addr = <0x04>;
-		phy-mode = "sgmii";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_system: system {
-			label = "ax860:green:system";
-			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "ax860:blue:wlan2g";
-			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "ax860:red:wlan5g";
-			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&qpic_nand {
-	status = "ok";
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&qusb_phy_0 {
-	status = "ok";
-};
-
-&usb3 {
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};

feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk

@@ -92,7 +92,7 @@ define Device/indio_um-310ax-v1
   SUPPORTED_DEVICES := indio,um-310ax-v1
   DEVICE_PACKAGES := ath11k-wifi-indio-um-310ax-v1 uboot-env
 endef
-TARGET_DEVICES += indio_um-310ax-v1
+#TARGET_DEVICES += indio_um-310ax-v1
 
 define Device/indio_um-510axp-v1
   DEVICE_TITLE := Indio UM-510AXP V1

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -14,8 +14,7 @@ cig,wf194c4)
 	;;
 edgecore,eap102|\
 edgecore,oap102|\
-edgecore,oap103|\
+edgecore,oap103)
-indio,um-345ax)
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -18,8 +18,7 @@ qcom_setup_interfaces()
 		ucidef_set_interface_wan "eth0"
 		ucidef_set_interface_lan ""
 		;;
-	cig,wf194c4|\
+	cig,wf194c4)
-	indio,um-345ax)
 		ucidef_set_interface_lan "eth0"
 		ucidef_set_interface_wan "eth1"
 		;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -73,7 +73,6 @@ case "$FIRMWARE" in
 	edgecore,oap103 |\
 	edgecore,eap106 |\
 	emplus,wap380c|\
-	indio,um-345ax|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
@@ -108,8 +107,7 @@ ath11k-macs)
 	edgecore,eap102|\
 	edgecore,oap102|\
 	edgecore,oap103|\
-	edgecore,eap106|\
+	edgecore,eap106)
-	indio,um-345ax)
 		ath11k_generate_macs
 		;;
 	cig,wf196)

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -30,7 +30,6 @@ platform_check_image() {
 	edgecore,oap103|\
 	edgecore,eap106|\
 	emplus,wap380c|\
-	indio,um-345ax|\
 	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
@@ -62,8 +61,7 @@ platform_do_upgrade() {
 	tplink,ex447)
 		nand_upgrade_tar "$1"
 		;;
-	edgecore,eap106|\
+	edgecore,eap106)
-	indio,um-345ax)
 		CI_UBIPART="rootfs1"
 		[ "$(find_mtd_chardev rootfs)" ] && CI_UBIPART="rootfs"
 		nand_upgrade_tar "$1"

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-indio-um-345ax.dts

@@ -1,713 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2020 The Linux Foundation. All rights reserved.
- * Copyright (c) 2025, Shubham Vishwakarma <shubhamvis98@fossfrog.in>
- */
-
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-ac-cpu.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Indio UM-345AX";
-	compatible = "indio,um-345ax", "qcom,ipq807x-hk09", "qcom,ipq807x";
-	qcom,msm-id = <0x178 0x0>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart5;
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet1 = "/soc/dp5";
-		ethernet0 = "/soc/dp6";
-
-		led-boot = &led_red;
-		led-failsafe = &led_red;
-		led-running = &led_green;
-		led-upgrade = &led_green;
-		led-gateway = &led_blue;
-		led-factory = &led_blue;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc {
-		pinctrl@1000000 {
-			pinctrl-0 = <&mcu_rst &mcu_rsv &usb_rear_pwr &usb_side_pwr &usb_hub_rst>;
-			pinctrl-names = "default";
-
-			mcu_rst: mcu_rst_pins {
-				pins = "gpio54";
-				function = "gpio";
-				drive-strength = <8>;
-				bias-disable;
-				output-low;
-			};
-
-			mcu_rsv: mcu_rsv_pins {
-				pins = "gpio56";
-				function = "gpio";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			usb_rear_pwr: usb_rear_pwr_pins {
-				pins = "gpio29";
-				function = "gpio";
-				drive-strength = <8>;
-				bias-disable;
-				output-high;
-			};
-
-			usb_side_pwr: usb_side_pwr_pins {
-				pins = "gpio30";
-				function = "gpio";
-				drive-strength = <8>;
-				bias-disable;
-				output-high;
-			};
-
-			usb_hub_rst: usb_hub_rst_pins {
-				pins = "gpio55";
-				function = "gpio";
-				drive-strength = <8>;
-				bias-disable;
-				output-high;
-			};
-
-			button_pins: button_pins {
-				reset_button {
-					pins = "gpio57";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			mdio_pins: mdio_pinmux {
-				mux_0 {
-					pins = "gpio68";
-					function = "mdc";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_1 {
-					pins = "gpio69";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio25";
-					function = "gpio";
-					bias-pull-up;
-				};
-				mux_3 {
-					pins = "gpio44";
-					function = "gpio";
-					bias-pull-up;
-				};
-			};
-			led_pins: led_pins {
-				led_red {
-					pins = "gpio0";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				led_2g {
-					pins = "gpio2";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				led_5g {
-					pins = "gpio9";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-		};
-
-		serial@78b3000 {
-			status = "ok";
-		};
-
-		spi@78b5000 {
-			status = "ok";
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-
-			m25p80@0 {
-				  compatible = "n25q128a11";
-				  #address-cells = <1>;
-				  #size-cells = <1>;
-				  reg = <0>;
-				  spi-max-frequency = <50000000>;
-			};
-		};
-
-		dma@7984000 {
-			 status = "ok";
-		};
-
-		nand@79b0000 {
-			status = "ok";
-
-			nand@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		qusb@79000 {
-			status = "ok";
-		};
-
-		ssphy@78000 {
-			status = "ok";
-		};
-
-		usb3@8A00000 {
-			status = "ok";
-		};
-
-		usb3@8C00000 {
-			status = "ok";
-		};
-
-		qusb@59000 {
-			status = "ok";
-		};
-
-		ssphy@58000 {
-			status = "ok";
-		};
-
-		usb3@8C00000 {
-			status = "ok";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		mdio: mdio@90000 {
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 1 &tlmm 44 1>;
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <24>;
-			};
-			phy5: ethernet-phy@5 {
-				reg = <28>;
-			};
-		};
-
-		ess-switch@3a000000 {
-			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-			switch_lan_bmp = <0x3e>; /* lan port bitmap */
-			switch_wan_bmp = <0x40>; /* wan port bitmap */
-			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
-			bm_tick_mode = <0>; /* bm tick mode */
-			tm_tick_mode = <0>; /* tm tick mode */
-			qcom,port_phyinfo {
-				port@0 {
-					port_id = <1>;
-					phy_address = <0>;
-				};
-				port@1 {
-					port_id = <2>;
-					phy_address = <1>;
-				};
-				port@2 {
-					port_id = <3>;
-					phy_address = <2>;
-				};
-				port@3 {
-					port_id = <4>;
-					phy_address = <3>;
-				};
-				port@4 {
-					port_id = <5>;
-					phy_address = <24>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-				port@5 {
-					port_id = <6>;
-					phy_address = <28>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-			};
-			port_scheduler_resource {
-				port@0 {
-					port_id = <0>;
-					ucast_queue = <0 143>;
-					mcast_queue = <256 271>;
-					l0sp = <0 35>;
-					l0cdrr = <0 47>;
-					l0edrr = <0 47>;
-					l1cdrr = <0 7>;
-					l1edrr = <0 7>;
-				};
-				port@1 {
-					port_id = <1>;
-					ucast_queue = <144 159>;
-					mcast_queue = <272 275>;
-					l0sp = <36 39>;
-					l0cdrr = <48 63>;
-					l0edrr = <48 63>;
-					l1cdrr = <8 11>;
-					l1edrr = <8 11>;
-				};
-				port@2 {
-					port_id = <2>;
-					ucast_queue = <160 175>;
-					mcast_queue = <276 279>;
-					l0sp = <40 43>;
-					l0cdrr = <64 79>;
-					l0edrr = <64 79>;
-					l1cdrr = <12 15>;
-					l1edrr = <12 15>;
-				};
-				port@3 {
-					port_id = <3>;
-					ucast_queue = <176 191>;
-					mcast_queue = <280 283>;
-					l0sp = <44 47>;
-					l0cdrr = <80 95>;
-					l0edrr = <80 95>;
-					l1cdrr = <16 19>;
-					l1edrr = <16 19>;
-				};
-				port@4 {
-					port_id = <4>;
-					ucast_queue = <192 207>;
-					mcast_queue = <284 287>;
-					l0sp = <48 51>;
-					l0cdrr = <96 111>;
-					l0edrr = <96 111>;
-					l1cdrr = <20 23>;
-					l1edrr = <20 23>;
-				};
-				port@5 {
-					port_id = <5>;
-					ucast_queue = <208 223>;
-					mcast_queue = <288 291>;
-					l0sp = <52 55>;
-					l0cdrr = <112 127>;
-					l0edrr = <112 127>;
-					l1cdrr = <24 27>;
-					l1edrr = <24 27>;
-				};
-				port@6 {
-					port_id = <6>;
-					ucast_queue = <224 239>;
-					mcast_queue = <292 295>;
-					l0sp = <56 59>;
-					l0cdrr = <128 143>;
-					l0edrr = <128 143>;
-					l1cdrr = <28 31>;
-					l1edrr = <28 31>;
-				};
-				port@7 {
-					port_id = <7>;
-					ucast_queue = <240 255>;
-					mcast_queue = <296 299>;
-					l0sp = <60 63>;
-					l0cdrr = <144 159>;
-					l0edrr = <144 159>;
-					l1cdrr = <32 35>;
-					l1edrr = <32 35>;
-				};
-			};
-			port_scheduler_config {
-				port@0 {
-					port_id = <0>;
-					l1scheduler {
-						group@0 {
-							sp = <0 1>; /*L0 SPs*/
-							/*cpri cdrr epri edrr*/
-							cfg = <0 0 0 0>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							/*unicast queues*/
-							ucast_queue = <0 4 8>;
-							/*multicast queues*/
-							mcast_queue = <256 260>;
-							/*sp cpri cdrr epri edrr*/
-							cfg = <0 0 0 0 0>;
-						};
-						group@1 {
-							ucast_queue = <1 5 9>;
-							mcast_queue = <257 261>;
-							cfg = <0 1 1 1 1>;
-						};
-						group@2 {
-							ucast_queue = <2 6 10>;
-							mcast_queue = <258 262>;
-							cfg = <0 2 2 2 2>;
-						};
-						group@3 {
-							ucast_queue = <3 7 11>;
-							mcast_queue = <259 263>;
-							cfg = <0 3 3 3 3>;
-						};
-					};
-				};
-				port@1 {
-					port_id = <1>;
-					l1scheduler {
-						group@0 {
-							sp = <36>;
-							cfg = <0 8 0 8>;
-						};
-						group@1 {
-							sp = <37>;
-							cfg = <1 9 1 9>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <144>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <272>;
-							mcast_loop_pri = <4>;
-							cfg = <36 0 48 0 48>;
-						};
-					};
-				};
-				port@2 {
-					port_id = <2>;
-					l1scheduler {
-						group@0 {
-							sp = <40>;
-							cfg = <0 12 0 12>;
-						};
-						group@1 {
-							sp = <41>;
-							cfg = <1 13 1 13>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <160>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <276>;
-							mcast_loop_pri = <4>;
-							cfg = <40 0 64 0 64>;
-						};
-					};
-				};
-				port@3 {
-					port_id = <3>;
-					l1scheduler {
-						group@0 {
-							sp = <44>;
-							cfg = <0 16 0 16>;
-						};
-						group@1 {
-							sp = <45>;
-							cfg = <1 17 1 17>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <176>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <280>;
-							mcast_loop_pri = <4>;
-							cfg = <44 0 80 0 80>;
-						};
-					};
-				};
-				port@4 {
-					port_id = <4>;
-					l1scheduler {
-						group@0 {
-							sp = <48>;
-							cfg = <0 20 0 20>;
-						};
-						group@1 {
-							sp = <49>;
-							cfg = <1 21 1 21>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <192>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <284>;
-							mcast_loop_pri = <4>;
-							cfg = <48 0 96 0 96>;
-						};
-					};
-				};
-				port@5 {
-					port_id = <5>;
-					l1scheduler {
-						group@0 {
-							sp = <52>;
-							cfg = <0 24 0 24>;
-						};
-						group@1 {
-							sp = <53>;
-							cfg = <1 25 1 25>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <208>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <288>;
-							mcast_loop_pri = <4>;
-							cfg = <52 0 112 0 112>;
-						};
-					};
-				};
-				port@6 {
-					port_id = <6>;
-					l1scheduler {
-						group@0 {
-							sp = <56>;
-							cfg = <0 28 0 28>;
-						};
-						group@1 {
-							sp = <57>;
-							cfg = <1 29 1 29>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <224>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <292>;
-							mcast_loop_pri = <4>;
-							cfg = <56 0 128 0 128>;
-						};
-					};
-				};
-				port@7 {
-					port_id = <7>;
-					l1scheduler {
-						group@0 {
-							sp = <60>;
-							cfg = <0 32 0 32>;
-						};
-						group@1 {
-							sp = <61>;
-							cfg = <1 33 1 33>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <240>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <296>;
-							cfg = <60 0 144 0 144>;
-						};
-					};
-				};
-			};
-		};
-
-		dp6 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <6>;
-			reg = <0x3a001800 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			phy-mode = "sgmii";
-		};
-
-		dp5 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <5>;
-			reg = <0x3a001a00 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <24>;
-			phy-mode = "sgmii";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&led_pins>;
-			pinctrl-names = "default";
-
-			led_red: led_sys {
-				label = "led_sys";
-				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-				linux,default-trigger = "led_pwr";
-			};
-
-			led_green: led_2g {
-				label = "led_2g";
-				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led_blue: led_5g {
-				label = "led_5g";
-				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-		nss-macsec0 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x18>;
-			mdiobus = <&mdio>;
-		};
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio>;
-		};
-	};
-};
-
-&apc_cpr {
-	/* Same CPR configuration as OAK */
-	compatible = "qcom,cpr4-ipq817x-apss-regulator";
-
-	thread@0 {
-		apc_vreg: regulator {
-			regulator-min-microvolt = <1>;
-			regulator-max-microvolt = <2>;
-			qcom,cpr-fuse-corners = <2>;
-			qcom,cpr-corners = <3>;
-			qcom,cpr-speed-bin-corners = <3>;
-			qcom,cpr-corner-fmax-map = <1 3>;
-
-			qcom,cpr-voltage-ceiling =
-				<840000 904000 944000>;
-			qcom,cpr-voltage-floor =
-				<592000 648000 712000>;
-			qcom,corner-frequencies =
-				<1017600000 1382400000 1382400000>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
-				/* Speed bin 0; CPR rev 0..7 */
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				< 20000  26000>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0   7000>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-floor-to-ceiling-max-range =
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>;
-		};
-	};
-};
-
-&npu_cpr {
-	status = "disabled";
-};
-
-&nss0 {
-        qcom,low-frequency = <187200000>;
-        qcom,mid-frequency = <748800000>;
-        qcom,max-frequency = <1497600000>;
-};
-
-&nss0 {
-	npu-supply = <&dummy_reg>;
-	mx-supply = <&dummy_reg>;
-};
-
-&wifi0 {
-	qcom,board_id = <0x92>;
-};
-
-&wifi1 {
-	qcom,board_id = <0x292>;
-};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -66,15 +66,6 @@ define Device/emplus_wap380c
 endef
 TARGET_DEVICES += emplus_wap380c
 
-define Device/indio_um-345ax
-  DEVICE_TITLE := Indio UM-345AX
-  DEVICE_DTS := qcom-ipq807x-indio-um-345ax
-  DEVICE_DTS_CONFIG=config@hk09
-  SUPPORTED_DEVICES := indio,um-345ax
-  DEVICE_PACKAGES := ath11k-wifi-indio-um-345ax uboot-envtools
-endef
-TARGET_DEVICES += indio_um-345ax
-
 define Device/sonicfi_rap650c
   DEVICE_TITLE := SonicFi RAP650C
   DEVICE_DTS := qcom-ipq807x-rap650c

profiles/indio_um-310ax-v1.yml

@@ -1,13 +0,0 @@
----
-profile: indio_um-310ax-v1
-target: ipq60xx
-subtarget: generic
-description: Build image for the Indio UM-310AX V1
-image: bin/targets/ipq60xx/generic/openwrt-ipq60xx-indio_um-310ax-v1-squashfs-sysupgrade.tar
-feeds:
-  - name: ipq807x
-    path: ../../feeds/ipq807x_v5.4
-include:
-  - ucentral-ap
-packages:
-  - ipq60xx

profiles/indio_um-345ax.yml

@@ -1,15 +0,0 @@
----
-profile: indio_um-345ax
-target: ipq807x
-subtarget: generic
-description: Build image for the Indio UM-345AX
-image: bin/targets/ipq807x/generic/openwrt-ipq807x-indio_um-345ax-squashfs-sysupgrade.tar
-feeds:
-  - name: ipq807x
-    path: ../../feeds/ipq807x_v5.4
-include:
-  - ucentral-ap
-packages:
-  - ipq807x
-diffconfig: |
-  CONFIG_KERNEL_IPQ_MEM_PROFILE=0