wifi-3258: Fix bridge client traffic on same wifi interface

Allow bridging broadcast and multicast traffic within same
bridge port if hairpinmode is enabled for that port.
This fixes the ARP packet between clients on same wifi interface
being dropped.

Signed-off-by: Chaitanya Godavarthi <chaitanya.kiran@netexperience.com>

feeds/ipq807x/qca-nss-clients/Makefile

@@ -0,0 +1,626 @@
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=qca-nss-clients
+PKG_SOURCE_PROTO:=git
+PKG_BRANCH:=master
+PKG_RELEASE:=2
+PKG_SOURCE_URL:=https://source.codeaurora.org/quic/qsdk/oss/lklm/nss-clients/
+PKG_VERSION:=9136ef60bf68ceed760781d3acbeddb05470e432
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE_VERSION:=$(PKG_VERSION)
+
+#PKG_BUILD_DEPENDS := PACKAGE_kmod-qca-nss-crypto:kmod-qca-nss-crypto
+MAKE_OPTS:=
+
+include $(INCLUDE_DIR)/package.mk
+
+# Keep default as ipq806x for branches that does not have subtarget framework
+ifeq ($(CONFIG_TARGET_ipq),y)
+subtarget:=$(SUBTARGET)
+else
+subtarget:=$(CONFIG_TARGET_BOARD)
+endif
+
+ifneq (, $(findstring $(subtarget), "ipq807x" "ipq807x_ipq807x" "ipq60xx" "ipq807x_ipq60xx"))
+# DTLS Manager v2.0 for Hawkeye/Cypress
+  DTLSMGR_DIR:=v2.0
+# IPsec Manager v2.0 for Hawkeye/Cypress
+  IPSECMGR_DIR:=v2.0
+else
+# DTLS Manager v1.0 for Akronite.
+  DTLSMGR_DIR:=v1.0
+# IPsec Manager v1.0 for Akronite.
+  IPSECMGR_DIR:=v1.0
+endif
+
+define KernelPackage/qca-nss-drv-tun6rd
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (connection manager) - tun6rd
+  DEPENDS:=+kmod-qca-nss-drv +kmod-sit @!LINUX_3_18
+  FILES:=$(PKG_BUILD_DIR)/qca-nss-tun6rd.ko
+  AUTOLOAD:=$(call AutoLoad,60,qca-nss-tun6rd)
+endef
+
+define KernelPackage/qca-nss-drv-tun6rd/Description
+Kernel modules for NSS connection manager - Support for 6rd tunnel
+endef
+
+define KernelPackage/qca-nss-drv-dtlsmgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (connection manager) - dtlsmgr
+  DEPENDS:=+kmod-qca-nss-drv +kmod-qca-nss-cfi-cryptoapi @!LINUX_3_18
+  FILES:=$(PKG_BUILD_DIR)/dtls/$(DTLSMGR_DIR)/qca-nss-dtlsmgr.ko
+endef
+
+define KernelPackage/qca-nss-drv-dtls/Description
+Kernel modules for NSS connection manager - Support for DTLS sessions
+endef
+
+define KernelPackage/qca-nss-drv-tlsmgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (connection manager) - tlsmgr
+  DEPENDS:=@TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq807x||TARGET_ipq807x_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx +kmod-qca-nss-drv +kmod-qca-nss-cfi @!LINUX_3_18
+  FILES:=$(PKG_BUILD_DIR)/tls/qca-nss-tlsmgr.ko
+endef
+
+define KernelPackage/qca-nss-drv-tls/Description
+Kernel modules for NSS connection manager - Support for TLS sessions
+endef
+
+define KernelPackage/qca-nss-drv-l2tpv2
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (connection manager) - l2tp
+  DEPENDS:=+kmod-qca-nss-drv +kmod-ppp +kmod-l2tp @!LINUX_3_18
+  FILES:=$(PKG_BUILD_DIR)/l2tp/l2tpv2/qca-nss-l2tpv2.ko
+  AUTOLOAD:=$(call AutoLoad,51,qca-nss-l2tpv2)
+endef
+
+define KernelPackage/qca-nss-drv-l2tp/Description
+Kernel modules for NSS connection manager - Support for l2tp tunnel
+endef
+
+define KernelPackage/qca-nss-drv-pptp
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (connection manager) - PPTP
+  DEPENDS:=+kmod-qca-nss-drv +kmod-pptp @!LINUX_3_18
+  FILES:=$(PKG_BUILD_DIR)/pptp/qca-nss-pptp.ko
+  AUTOLOAD:=$(call AutoLoad,51,qca-nss-pptp)
+endef
+
+define KernelPackage/qca-nss-drv-pptp/Description
+Kernel modules for NSS connection manager - Support for PPTP tunnel
+endef
+
+define KernelPackage/qca-nss-drv-pppoe
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (connection manager) - PPPoE
+  DEPENDS:=+kmod-qca-nss-drv +kmod-pppoe @!LINUX_3_18 \
+		+!(TARGET_ipq_ipq807x_QSDK_256||TARGET_ipq_ipq60xx_QSDK_256):kmod-bonding
+  FILES:=$(PKG_BUILD_DIR)/pppoe/qca-nss-pppoe.ko
+  AUTOLOAD:=$(call AutoLoad,51,qca-nss-pppoe)
+endef
+
+define KernelPackage/qca-nss-drv-pppoe/Description
+Kernel modules for NSS connection manager - Support for PPPoE
+endef
+
+define KernelPackage/qca-nss-drv-map-t
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (connection manager) - MAP-T
+  DEPENDS:=+kmod-qca-nss-drv +kmod-nat46 @!LINUX_3_18
+  FILES:=$(PKG_BUILD_DIR)/map/map-t/qca-nss-map-t.ko
+  AUTOLOAD:=$(call AutoLoad,51,qca-nss-map-t)
+endef
+
+define KernelPackage/qca-nss-drv-map-t/Description
+Kernel modules for NSS connection manager - Support for MAP-T
+endef
+
+define KernelPackage/qca-nss-drv-gre
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (connection manager) - GRE
+  DEPENDS:=@TARGET_ipq_ipq806x||TARGET_ipq806x||TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq807x||TARGET_ipq807x_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx||TARGET_ipq_ipq50xx||TARGET_ipq_ipq50xx_64 \
+	   +kmod-qca-nss-drv @!LINUX_3_18 +kmod-gre6
+  FILES:=$(PKG_BUILD_DIR)/gre/qca-nss-gre.ko $(PKG_BUILD_DIR)/gre/test/qca-nss-gre-test.ko
+  AUTOLOAD:=$(call AutoLoad,51,qca-nss-gre)
+endef
+
+define KernelPackage/qca-nss-drv-gre/Description
+Kernel modules for NSS connection manager - Support for GRE
+endef
+
+define KernelPackage/qca-nss-drv-tunipip6
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (connection manager) - DS-lite and ipip6 Tunnel
+  DEPENDS:=+kmod-qca-nss-drv +kmod-iptunnel6 +kmod-ip6-tunnel @!LINUX_3_18
+  FILES:=$(PKG_BUILD_DIR)/tunipip6/qca-nss-tunipip6.ko
+  AUTOLOAD:=$(call AutoLoad,60,qca-nss-tunipip6)
+endef
+
+define KernelPackage/qca-nss-drv-tunipip6/Description
+Kernel modules for NSS connection manager
+Add support for DS-lite and ipip6 tunnel
+endef
+
+define KernelPackage/qca-nss-drv-profile
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  DEPENDS:=+kmod-qca-nss-drv @!LINUX_3_18
+  TITLE:=Profiler for QCA NSS driver (IPQ806x)
+  FILES:=$(PKG_BUILD_DIR)/profiler/qca-nss-profile-drv.ko
+endef
+
+define KernelPackage/qca-nss-drv-profile/Description
+This package contains a NSS driver profiler for QCA chipset
+endef
+
+define KernelPackage/qca-nss-drv-ipsecmgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (ipsec manager) - ipsecmgr
+  DEPENDS:=@TARGET_ipq806x||TARGET_ipq_ipq806x||TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq807x||TARGET_ipq807x_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx \
+		+kmod-qca-nss-drv +kmod-qca-nss-cfi-cryptoapi +kmod-qca-nss-cfi-ocf @!LINUX_3_18
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-l2tpv2),)
+  DEPENDS:=+kmod-qca-nss-drv-l2tpv2
+endif
+  FILES:=$(PKG_BUILD_DIR)/ipsecmgr/$(IPSECMGR_DIR)/qca-nss-ipsecmgr.ko
+  AUTOLOAD:=$(call AutoLoad,60,qca-nss-ipsecmgr)
+endef
+
+define KernelPackage/qca-nss-drv-ipsecmgr/Description
+Kernel module for NSS IPsec offload manager
+endef
+
+define KernelPackage/qca-nss-drv-ipsecmgr-klips
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS (ipsec klips)
+  DEPENDS:=@TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx \
+		+kmod-qca-nss-drv-ipsecmgr kmod-qca-nss-ecm
+  FILES:=$(PKG_BUILD_DIR)/ipsecmgr/$(IPSECMGR_DIR)/plugins/klips/qca-nss-ipsec-klips.ko
+endef
+
+define KernelPackage/qca-nss-drv-ipsecmgr-klips/Description
+NSS Kernel module for IPsec klips offload
+endef
+
+
+define KernelPackage/qca-nss-drv-capwapmgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  DEPENDS:=+kmod-qca-nss-drv +kmod-qca-nss-drv-dtlsmgr @!LINUX_3_18
+  TITLE:=NSS CAPWAP Manager for QCA NSS driver (IPQ806x)
+  FILES:=$(PKG_BUILD_DIR)/capwapmgr/qca-nss-capwapmgr.ko
+endef
+
+define KernelPackage/qca-nss-drv-capwapmgr/Description
+This package contains a NSS CAPWAP Manager
+endef
+
+define KernelPackage/qca-nss-drv-bridge-mgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS bridge manager
+  DEPENDS:=@TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq807x||TARGET_ipq807x_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx \
+		+TARGET_ipq_ipq807x:kmod-qca-nss-drv-vlan-mgr \
+		+TARGET_ipq_ipq807x_ipq807x:kmod-qca-nss-drv-vlan-mgr \
+		+TARGET_ipq807x:kmod-qca-nss-drv-vlan-mgr \
+		+TARGET_ipq807x_ipq807x:kmod-qca-nss-drv-vlan-mgr \
+		+TARGET_ipq_ipq60xx:kmod-qca-nss-drv-vlan-mgr \
+		+TARGET_ipq807x_ipq60xx:kmod-qca-nss-drv-vlan-mgr @!LINUX_3_18 \
+		+!(TARGET_ipq_ipq807x_QSDK_256||TARGET_ipq_ipq60xx_QSDK_256):kmod-bonding
+  FILES:=$(PKG_BUILD_DIR)/bridge/qca-nss-bridge-mgr.ko
+  AUTOLOAD:=$(call AutoLoad,51,qca-nss-bridge-mgr)
+endef
+
+define KernelPackage/qca-nss-drv-bridge-mgr/Description
+Kernel modules for NSS bridge manager
+endef
+
+define KernelPackage/qca-nss-drv-vlan-mgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS vlan manager
+  DEPENDS:=@TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq807x||TARGET_ipq807x_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx +kmod-qca-nss-drv @!LINUX_3_18 \
+		+!(TARGET_ipq_ipq807x_QSDK_256||TARGET_ipq_ipq60xx_QSDK_256):kmod-bonding
+  FILES:=$(PKG_BUILD_DIR)/vlan/qca-nss-vlan.ko
+  AUTOLOAD:=$(call AutoLoad,51,qca-nss-vlan)
+endef
+
+define KernelPackage/qca-nss-drv-vlan-mgr/Description
+Kernel modules for NSS vlan manager
+endef
+
+define KernelPackage/qca-nss-drv-qdisc
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Support
+  TITLE:=Qdisc for configuring shapers in NSS
+  DEPENDS:=+kmod-qca-nss-drv @!LINUX_3_18
+  FILES:=$(PKG_BUILD_DIR)/nss_qdisc/qca-nss-qdisc.ko
+  AUTOLOAD:=$(call AutoLoad,58,qca-nss-qdisc)
+endef
+
+define KernelPackage/qca-nss-drv-qdisc/Description
+Linux qdisc that aids in configuring shapers in the NSS
+endef
+
+define KernelPackage/qca-nss-drv-igs
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Support
+  TITLE:=Action for offloading traffic to an IFB interface to perform ingress shaping.
+  DEPENDS:=@TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx||TARGET_ipq_ipq50xx||TARGET_ipq_ipq50xx_64 \
+	+kmod-qca-nss-drv +kmod-sched-core +kmod-ifb +kmod-qca-nss-drv-qdisc @!LINUX_3_18
+  FILES:=$(PKG_BUILD_DIR)/nss_qdisc/igs/act_nssmirred.ko
+endef
+
+define KernelPackage/qca-nss-drv-igs/Description
+Linux action that helps in offloading traffic to an IFB interface to perform ingress shaping.
+endef
+
+define KernelPackage/qca-nss-drv-lag-mgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS LAG manager
+  DEPENDS:=+kmod-qca-nss-drv  @!LINUX_3_18 \
+	   +TARGET_ipq_ipq807x:kmod-qca-nss-drv-vlan-mgr \
+	   +TARGET_ipq_ipq807x_ipq807x:kmod-qca-nss-drv-vlan-mgr @!LINUX_3_18 \
+	   +TARGET_ipq807x:kmod-qca-nss-drv-vlan-mgr \
+	   +TARGET_ipq807x_ipq807x:kmod-qca-nss-drv-vlan-mgr @!LINUX_3_18 \
+	   +TARGET_ipq_ipq60xx:kmod-qca-nss-drv-vlan-mgr @!LINUX_3_18 \
+	   +TARGET_ipq807x_ipq60xx:kmod-qca-nss-drv-vlan-mgr @!LINUX_3_18 \
+	   +kmod-bonding
+  FILES:=$(PKG_BUILD_DIR)/lag/qca-nss-lag-mgr.ko
+  AUTOLOAD:=$(call AutoLoad,51,qca-nss-lag-mgr)
+endef
+
+define KernelPackage/qca-nss-drv-lag-mgr/Description
+Kernel modules for NSS LAG manager
+endef
+
+define KernelPackage/qca-nss-drv-netlink
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  DEPENDS:=@TARGET_ipq807x||TARGET_ipq_ipq807x||TARGET_ipq807x_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx||TARGET_ipq_ipq50xx||TARGET_ipq_ipq50xx_64 \
+		+kmod-qca-nss-drv @!LINUX_3_18 \
+		+PACKAGE_kmod-qca-nss-drv-ipsecmgr:kmod-qca-nss-drv-ipsecmgr \
+		+PACKAGE_kmod-qca-nss-drv-dtlsmgr:kmod-qca-nss-drv-dtlsmgr \
+		+PACKAGE_kmod-qca-nss-drv-capwapmgr:kmod-qca-nss-drv-capwapmgr @!LINUX_3_18
+  TITLE:=NSS NETLINK Manager for QCA NSS driver
+  FILES:=$(PKG_BUILD_DIR)/netlink/qca-nss-netlink.ko
+endef
+
+define KernelPackage/qca-nss-drv-netlink/Description
+Kernel module for NSS netlink manager
+endef
+
+define KernelPackage/qca-nss-drv-ovpn-mgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for NSS OpenVPN manager
+  DEPENDS:=+kmod-qca-nss-drv +kmod-qca-nss-cfi +kmod-tun +kmod-ipt-conntrack @!LINUX_3_18 \
+	  @TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx
+  FILES:=$(PKG_BUILD_DIR)/openvpn/src/qca-nss-ovpn-mgr.ko
+endef
+
+define KernelPackage/qca-nss-drv-ovpn-mgr/Description
+Kernel module for NSS OpenVPN manager
+endef
+
+define KernelPackage/qca-nss-drv-ovpn-link
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=Kernel driver for interfacing NSS OpenVPN manager with ECM
+  DEPENDS:=+kmod-qca-nss-drv-ovpn-mgr +kmod-qca-nss-ecm-premium @!LINUX_3_18 \
+	  @TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_ipq807x||TARGET_ipq_ipq60xx||TARGET_ipq807x_ipq60xx
+  FILES:=$(PKG_BUILD_DIR)/openvpn/plugins/qca-nss-ovpn-link.ko
+endef
+
+define KernelPackage/qca-nss-drv-ovpn-link/Description
+This module registers with ECM and communicates with NSS OpenVPN manager for supporting OpenVPN offload.
+endef
+
+define KernelPackage/qca-nss-drv-pvxlanmgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  DEPENDS:=+kmod-qca-nss-drv @!LINUX_3_18
+  TITLE:=NSS PVXLAN Manager for QCA NSS driver
+  FILES:=$(PKG_BUILD_DIR)/pvxlanmgr/qca-nss-pvxlanmgr.ko
+endef
+
+define KernelPackage/qca-nss-drv-pvxlanmgr/Description
+Kernel module for managing NSS PVxLAN
+endef
+
+define KernelPackage/qca-nss-drv-eogremgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  DEPENDS:=+kmod-qca-nss-drv +kmod-qca-nss-drv-gre @!LINUX_3_18
+  TITLE:=NSS EOGRE Manager for QCA NSS driver
+  FILES:=$(PKG_BUILD_DIR)/eogremgr/qca-nss-eogremgr.ko
+endef
+
+define KernelPackage/qca-nss-drv-eogremgr/Description
+Kernel module for managing NSS EoGRE
+endef
+
+define KernelPackage/qca-nss-drv-clmapmgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  DEPENDS:=+kmod-qca-nss-drv +kmod-qca-nss-drv-eogremgr @!LINUX_3_18
+  TITLE:=NSS clmap Manager for QCA NSS driver
+  FILES:=$(PKG_BUILD_DIR)/clmapmgr/qca-nss-clmapmgr.ko
+endef
+
+define KernelPackage/qca-nss-drv-clmapmgr/Description
+Kernel module for managing NSS clmap
+endef
+
+define KernelPackage/qca-nss-drv-vxlanmgr
+  SECTION:=kernel
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  DEPENDS:=+kmod-qca-nss-drv +kmod-vxlan @!LINUX_3_18
+  TITLE:=NSS VxLAN Manager for QCA NSS driver
+  FILES:=$(PKG_BUILD_DIR)/vxlanmgr/qca-nss-vxlanmgr.ko
+  AUTOLOAD:=$(call AutoLoad,51,qca-nss-vxlanmgr)
+endef
+
+define KernelPackage/qca-nss-drv-vxlanmgr/Description
+Kernel module for managing NSS VxLAN
+endef
+
+define KernelPackage/qca-nss-drv-match
+ SECTION:=kernel
+ CATEGORY:=Kernel modules
+ SUBMENU:=Network Devices
+ DEPENDS:=+kmod-qca-nss-drv @!LINUX_3_18
+ TITLE:=NSS Match for QCA NSS driver
+ FILES:=$(PKG_BUILD_DIR)/match/qca-nss-match.ko
+endef
+
+define KernelPackage/qca-nss-drv-match/Description
+Kernel module for managing NSS Match
+endef
+
+define KernelPackage/qca-nss-drv-mirror
+ SECTION:=kernel
+ CATEGORY:=Kernel modules
+ SUBMENU:=Network Support
+ TITLE:=Module for mirroring packets from NSS to host.
+ DEPENDS:=+kmod-qca-nss-drv @!LINUX_3_18
+ FILES:=$(PKG_BUILD_DIR)/mirror/qca-nss-mirror.ko
+endef
+
+define KernelPackage/qca-nss-drv-mirror/Description
+Kernel module for managing NSS Mirror
+endef
+
+define Build/InstallDev/qca-nss-clients
+	$(INSTALL_DIR) $(1)/usr/include/qca-nss-clients
+	$(CP) $(PKG_BUILD_DIR)/netlink/include/* $(1)/usr/include/qca-nss-clients/
+	$(CP) $(PKG_BUILD_DIR)/exports/* $(1)/usr/include/qca-nss-clients/
+endef
+
+define Build/InstallDev
+	$(call Build/InstallDev/qca-nss-clients,$(1))
+endef
+
+define KernelPackage/qca-nss-drv-ovpn-mgr/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/qca-nss-ovpn.init $(1)/etc/init.d/qca-nss-ovpn
+endef
+
+define KernelPackage/qca-nss-drv-ipsecmgr-klips/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/qca-nss-ipsec $(1)/etc/init.d/qca-nss-ipsec
+endef
+
+define KernelPackage/qca-nss-drv-igs/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/qca-nss-mirred.init $(1)/etc/init.d/qca-nss-mirred
+endef
+
+EXTRA_CFLAGS+= \
+	-I$(STAGING_DIR)/usr/include/qca-nss-drv \
+	-I$(STAGING_DIR)/usr/include/qca-nss-crypto \
+	-I$(STAGING_DIR)/usr/include/qca-nss-cfi \
+	-I$(STAGING_DIR)/usr/include/qca-nss-gmac \
+	-I$(STAGING_DIR)/usr/include/qca-ssdk \
+	-I$(STAGING_DIR)/usr/include/qca-ssdk/fal \
+	-I$(STAGING_DIR)/usr/include/nat46
+
+# Build individual packages if selected
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-profile),)
+MAKE_OPTS+=profile=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-capwapmgr),)
+MAKE_OPTS+=capwapmgr=y
+EXTRA_CFLAGS += -DNSS_CAPWAPMGR_ONE_NETDEV
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-tun6rd),)
+MAKE_OPTS+=tun6rd=m
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-dtlsmgr),)
+MAKE_OPTS+=dtlsmgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-tlsmgr),)
+MAKE_OPTS+=tlsmgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-l2tpv2),)
+MAKE_OPTS+=l2tpv2=y
+EXTRA_CFLAGS += -DNSS_L2TPV2_ENABLED
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-pptp),)
+MAKE_OPTS+=pptp=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-map-t),)
+MAKE_OPTS+=map-t=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-tunipip6),)
+MAKE_OPTS+=tunipip6=m
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-qdisc),)
+MAKE_OPTS+=qdisc=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-igs),)
+MAKE_OPTS+=igs=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-ipsecmgr),)
+EXTRA_CFLAGS+= -I$(PKG_BUILD_DIR)/exports
+MAKE_OPTS+=ipsecmgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-ipsecmgr-klips),)
+EXTRA_CFLAGS+= -I$(STAGING_DIR)/usr/include/qca-nss-ecm
+MAKE_OPTS+=ipsecmgr-klips=m
+endif
+
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-bridge-mgr),)
+MAKE_OPTS+=bridge-mgr=y
+#enable OVS bridge if ovsmgr is enabled
+ifneq ($(CONFIG_PACKAGE_kmod-qca-ovsmgr),)
+MAKE_OPTS+= NSS_BRIDGE_MGR_OVS_ENABLE=y
+EXTRA_CFLAGS+= -I$(STAGING_DIR)/usr/include/qca-ovsmgr
+endif
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-vlan-mgr),)
+MAKE_OPTS+=vlan-mgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-lag-mgr),)
+MAKE_OPTS+=lag-mgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-gre),)
+EXTRA_CFLAGS+= -I$(PKG_BUILD_DIR)/exports
+MAKE_OPTS+=gre=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-pppoe),)
+MAKE_OPTS+=pppoe=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-netlink),)
+MAKE_OPTS+=netlink=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-ovpn-mgr),)
+MAKE_OPTS+=ovpn-mgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-ovpn-link),)
+MAKE_OPTS+=ovpn-link=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-pvxlanmgr),)
+MAKE_OPTS+=pvxlanmgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-eogremgr),)
+MAKE_OPTS+=eogremgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-clmapmgr),)
+MAKE_OPTS+=clmapmgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-vxlanmgr),)
+MAKE_OPTS+=vxlanmgr=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-match),)
+MAKE_OPTS+=match=y
+endif
+
+ifneq ($(CONFIG_PACKAGE_kmod-qca-nss-drv-mirror),)
+MAKE_OPTS+=mirror=y
+endif
+
+define Build/Compile
+	$(MAKE) -C "$(LINUX_DIR)" $(strip $(MAKE_OPTS)) \
+		CROSS_COMPILE="$(TARGET_CROSS)" \
+		ARCH="$(LINUX_KARCH)" \
+		M="$(PKG_BUILD_DIR)" \
+		EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
+		SoC="$(subtarget)" \
+		DTLSMGR_DIR="$(DTLSMGR_DIR)" \
+		IPSECMGR_DIR="$(IPSECMGR_DIR)" \
+		modules
+endef
+
+$(eval $(call KernelPackage,qca-nss-drv-profile))
+#$(eval $(call KernelPackage,qca-nss-drv-capwapmgr))
+$(eval $(call KernelPackage,qca-nss-drv-tun6rd))
+#$(eval $(call KernelPackage,qca-nss-drv-dtlsmgr))
+$(eval $(call KernelPackage,qca-nss-drv-l2tpv2))
+$(eval $(call KernelPackage,qca-nss-drv-pptp))
+$(eval $(call KernelPackage,qca-nss-drv-pppoe))
+$(eval $(call KernelPackage,qca-nss-drv-map-t))
+$(eval $(call KernelPackage,qca-nss-drv-tunipip6))
+$(eval $(call KernelPackage,qca-nss-drv-qdisc))
+$(eval $(call KernelPackage,qca-nss-drv-igs))
+#$(eval $(call KernelPackage,qca-nss-drv-netlink))
+#$(eval $(call KernelPackage,qca-nss-drv-ipsecmgr))
+#$(eval $(call KernelPackage,qca-nss-drv-ipsecmgr-klips))
+$(eval $(call KernelPackage,qca-nss-drv-bridge-mgr))
+$(eval $(call KernelPackage,qca-nss-drv-vlan-mgr))
+$(eval $(call KernelPackage,qca-nss-drv-lag-mgr))
+$(eval $(call KernelPackage,qca-nss-drv-gre))
+#$(eval $(call KernelPackage,qca-nss-drv-ovpn-mgr))
+#$(eval $(call KernelPackage,qca-nss-drv-ovpn-link))
+$(eval $(call KernelPackage,qca-nss-drv-pvxlanmgr))
+$(eval $(call KernelPackage,qca-nss-drv-eogremgr))
+$(eval $(call KernelPackage,qca-nss-drv-clmapmgr))
+$(eval $(call KernelPackage,qca-nss-drv-vxlanmgr))
+$(eval $(call KernelPackage,qca-nss-drv-match))
+#$(eval $(call KernelPackage,qca-nss-drv-tlsmgr))
+$(eval $(call KernelPackage,qca-nss-drv-mirror))

feeds/ipq807x/qca-nss-clients/files/qca-nss-ipsec

@@ -0,0 +1,92 @@
+#!/bin/sh  /etc/rc.common
+#
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+#
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+NSS_IPSEC_LOG_FILE=/tmp/.nss_ipsec_log
+NSS_IPSEC_LOG_STR_ECM="ECM_Loaded"
+
+ecm_load () {
+	if [ ! -d /sys/module/ecm ]; then
+		/etc/init.d/qca-nss-ecm start
+		if [ -d /sys/module/ecm ]; then
+			echo ${NSS_IPSEC_LOG_STR_ECM} >> ${NSS_IPSEC_LOG_FILE}
+		fi
+	fi
+}
+
+ecm_unload () {
+	if [ -f /tmp/.nss_ipsec_log ]; then
+		str=`grep ${NSS_IPSEC_LOG_STR_ECM} ${NSS_IPSEC_LOG_FILE}`
+		if [[ $str == ${NSS_IPSEC_LOG_STR_ECM} ]]; then
+			/etc/init.d/qca-nss-ecm stop
+			`sed 's/${NSS_IPSEC_LOG_STR_ECM}/ /g' $NSS_IPSEC_LOG_FILE >  $NSS_IPSEC_LOG_FILE`
+		fi
+	fi
+}
+
+ecm_disable() {
+
+	if [ ! -d /sys/module/ecm ]; then
+		return;
+	fi
+
+	echo 1 > /sys/kernel/debug/ecm/front_end_ipv4_stop
+	echo 1 > /sys/kernel/debug/ecm/front_end_ipv6_stop
+	echo 1 > /sys/kernel/debug/ecm/ecm_db/defunct_all
+	sleep 2
+}
+
+ecm_enable() {
+	if [ ! -d /sys/module/ecm ]; then
+		return;
+	fi
+
+	echo 0 > /sys/kernel/debug/ecm/ecm_db/defunct_all
+	echo 0 > /sys/kernel/debug/ecm/front_end_ipv4_stop
+	echo 0 > /sys/kernel/debug/ecm/front_end_ipv6_stop
+}
+
+start() {
+	ecm_load
+
+	local kernel_version=$(uname -r)
+
+	insmod /lib/modules/${kernel_version}/qca-nss-ipsec-klips.ko
+	if [ "$?" -gt 0 ]; then
+		echo "Failed to load plugin. Please start ecm if not done already"
+		ecm_enable
+		return
+	fi
+
+	/etc/init.d/ipsec start
+	sleep 2
+	ipsec eroute
+
+	ecm_enable
+}
+
+stop() {
+	ecm_disable
+
+	/etc/init.d/ipsec stop
+	rmmod qca-nss-ipsec-klips
+
+	ecm_unload
+}
+
+restart() {
+	stop
+	start
+}

feeds/ipq807x/qca-nss-clients/files/qca-nss-mirred.init

@@ -0,0 +1,28 @@
+#!/bin/sh /etc/rc.common
+
+###########################################################################
+# Copyright (c) 2019, The Linux Foundation. All rights reserved.
+# Permission to use, copy, modify, and/or distribute this software for
+# any purpose with or without fee is hereby granted, provided that the
+# above copyright notice and this permission notice appear in all copies.
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+###########################################################################
+
+restart() {
+	rmmod act_nssmirred.ko
+	insmod act_nssmirred.ko
+}
+
+start() {
+	insmod act_nssmirred.ko
+}
+
+stop() {
+	rmmod act_nssmirred.ko
+}

feeds/ipq807x/qca-nss-clients/files/qca-nss-ovpn.init

@@ -0,0 +1,69 @@
+#!/bin/sh /etc/rc.common
+
+###########################################################################
+# Copyright (c) 2019, The Linux Foundation. All rights reserved.
+# Permission to use, copy, modify, and/or distribute this software for
+# any purpose with or without fee is hereby granted, provided that the
+# above copyright notice and this permission notice appear in all copies.
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+###########################################################################
+
+ecm_disable() {
+	if [ ! -d /sys/module/ecm ]; then
+	   return
+	fi
+
+	echo 1 > /sys/kernel/debug/ecm/front_end_ipv4_stop
+	echo 1 > /sys/kernel/debug/ecm/front_end_ipv6_stop
+	echo 1 > /sys/kernel/debug/ecm/ecm_db/defunct_all
+	sleep 2
+}
+
+ecm_enable() {
+	if [ ! -d /sys/module/ecm ]; then
+	   return
+	fi
+
+	echo 0 > /sys/kernel/debug/ecm/ecm_db/defunct_all
+	echo 0 > /sys/kernel/debug/ecm/front_end_ipv4_stop
+	echo 0 > /sys/kernel/debug/ecm/front_end_ipv6_stop
+}
+
+restart() {
+	ecm_disable
+
+	/etc/init.d/openvpn stop
+	rmmod qca-nss-ovpn-link
+	rmmod qca-nss-ovpn-mgr
+
+	insmod qca-nss-ovpn-mgr
+	insmod qca-nss-ovpn-link
+
+	if [ "$?" -gt 0 ]; then
+		echo "Failed to load plugin. Please start ecm if not done already"
+		ecm_enable
+		return
+	fi
+
+	ecm_enable
+}
+
+start() {
+	restart
+}
+
+stop() {
+	ecm_disable
+
+	/etc/init.d/openvpn stop
+	rmmod qca-nss-ovpn-link
+	rmmod qca-nss-ovpn-mgr
+
+	ecm_enable
+}

feeds/wifi-ax/hostapd/files/hostapd.sh

@@ -47,8 +47,18 @@ hostapd_append_wpa_key_mgmt() {
 			[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
 			[ "${ieee80211ai:-0}" -gt 0 ] && append wpa_key_mgmt "FILS-SHA256"
 		;;
+		eap-only)
+			append wpa_key_mgmt "WPA-EAP-SHA256"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
+		;;
+		eap-transition)
+			append wpa_key_mgmt "WPA-EAP"
+			append wpa_key_mgmt "WPA-EAP-SHA256"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
+		;;
 		eap192)
 			append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
+			[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-EAP-SHA256"
 			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
 		;;
 		eap-eap192)
@@ -204,6 +214,9 @@ hostapd_common_add_bss_config() {
 	config_add_int maxassoc max_inactivity
 	config_add_boolean disassoc_low_ack isolate short_preamble
 
+config_add_int signal_connect signal_stay signal_poll_time \
+		signal_drop_reason signal_strikes
+
 	config_add_int \
 		wep_rekey eap_reauth_period \
 		wpa_group_rekey wpa_pair_rekey wpa_master_rekey
@@ -311,14 +324,15 @@ hostapd_common_add_bss_config() {
 	config_add_string osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
 
 	config_add_boolean interworking internet
-	config_add_int access_network_type asra esr uesa venue_group venue_type ipaddr_type_availability \
+	config_add_int access_network_type asra esr uesa venue_group venue_type  \
 		gas_address3
-	config_add_string hessid network_auth_type \
+	config_add_string hessid network_auth_type ipaddr_type_availability \
 		anqp_3gpp_cell_net anqp_elem domain_name qos_map_set hs20_t_c_server_url
 
 	config_add_array airtime_sta_weight
 	config_add_int airtime_bss_weight airtime_bss_limit
 	config_add_int rts_threshold
+	config_add_boolean multicast_to_unicast proxy_arp
 }
 
 hostapd_set_vlan_file() {
@@ -474,6 +488,7 @@ hostapd_set_bss_options() {
 	local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 
 	json_get_vars \
+	signal_connect signal_stay signal_poll_time signal_drop_reason signal_strikes \
 		wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_strict_rekey \
 		wpa_disable_eapol_key_retries tdls_prohibit \
 		maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
@@ -485,7 +500,8 @@ hostapd_set_bss_options() {
 		bss_load_update_period chan_util_avg_period sae_require_mfp \
 		multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key \
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request rts_threshold 
+		rssi_reject_assoc_rssi rssi_ignore_probe_request rts_threshold \
+		proxy_arp multicast_to_unicast
 
 	set_default isolate 0
 	set_default maxassoc 0
@@ -508,6 +524,14 @@ hostapd_set_bss_options() {
 	set_default rssi_reject_assoc_rssi 0
 	set_default rssi_ignore_probe_request 0
 	set_default rts_threshold -1
+	set_default signal_connect -128
+	set_default signal_stay -128
+	set_default signal_poll_time 5
+	set_default signal_drop_reason 3
+	set_default signal_strikes 3
+	set_default proxy_arp 1
+	set_default multicast_to_unicast 0
+
 
 	append bss_conf "ctrl_interface=/var/run/hostapd"
 	if [ "$isolate" -gt 0 ]; then
@@ -536,6 +560,14 @@ hostapd_set_bss_options() {
 	append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
 	append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	append bss_conf "rts_threshold=$rts_threshold" "$N"
+	append bss_conf "signal_connect=$signal_connect" "$N"
+	append bss_conf "signal_stay=$signal_stay" "$N"
+	append bss_conf "signal_poll_time=$signal_poll_time" "$N"
+	append bss_conf "signal_strikes=$signal_strikes" "$N"
+	append bss_conf "signal_drop_reason=$signal_drop_reason" "$N"
+
+	[ -n "$proxy_arp" ] && append bss_conf "proxy_arp=$proxy_arp" "$N"
+	[ -n "$multicast_to_unicast" ] && append bss_conf "multicast_to_unicast=$multicast_to_unicast" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
 
@@ -557,11 +589,11 @@ hostapd_set_bss_options() {
 	}
 
 	case "$auth_type" in
-		sae|owe|eap192|eap-eap192)
+		sae|owe|eap192|eap-eap192|eap-only)
 			set_default ieee80211w 2
 			set_default sae_require_mfp 1
 		;;
-		psk-sae)
+		psk-sae|eap-transition)
 			set_default ieee80211w 1
 			set_default sae_require_mfp 1
 		;;
@@ -603,7 +635,7 @@ hostapd_set_bss_options() {
 			vlan_possible=1
 			wps_possible=1
 		;;
-		eap|eap192|eap-eap192)
+		eap|eap192|eap-eap192|eap-only|eap-transition)
 			json_get_vars \
 				auth_server auth_secret auth_port \
 				dae_client dae_secret dae_port \
@@ -815,7 +847,15 @@ hostapd_set_bss_options() {
 				json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout
 				append bss_conf "ieee80211w=$ieee80211w" "$N"
 				[ "$ieee80211w" -gt "0" ] && {
-					append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
+					case "$auth_type" in
+						eap192)
+							append bss_conf "group_mgmt_cipher=BIP-GMAC-256" "$N"
+							append bss_conf "group_cipher=GCMP-256" "$N"
+						;;
+						*)
+							append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
+						;;
+					esac
 					[ -n "$ieee80211w_max_timeout" ] && \
 						append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
 					[ -n "$ieee80211w_retry_timeout" ] && \
@@ -940,16 +980,15 @@ hostapd_set_bss_options() {
 	set_default access_network_type 0
 	set_default venue_group 0
 	set_default venue_type 0
-	set_default ipaddr_type_availability 0
 	set_default gas_address3 0
 	set_default hs20_deauth_req_timeout 60
 	if [ "$hs20" = "1" ]; then
 		append bss_conf "hs20=1" "$N"
 		append_hs20_icons
-		[ -n "$disable_dgaf"] && append bss_conf "disable_dgaf=$disable_dgaf" "$N"
-		[ -n "$osen"] && append bss_conf "osen=$osen" "$N"
+		[ -n "$disable_dgaf" ] && append bss_conf "disable_dgaf=$disable_dgaf" "$N"
+		[ -n "$osen" ] && append bss_conf "osen=$osen" "$N"
 		[ "$anqp_domain_id" -gt 0 ] && append bss_conf "anqp_domain_id=$anqp_domain_id" "$N"
-		[ -n "$hs20_deauth_req_timeout"] && append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N"
+		[ -n "$hs20_deauth_req_timeout" ] && append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N"
 		[ -n "$osu_ssid" ] && append bss_conf "osu_ssid=$osu_ssid" "$N"
 		[ -n "$hs20_wan_metrics" ] && append bss_conf "hs20_wan_metrics=$hs20_wan_metrics" "$N"
 		[ -n "$hs20_operating_class" ] && append bss_conf "hs20_operating_class=$hs20_operating_class" "$N"
@@ -961,7 +1000,6 @@ hostapd_set_bss_options() {
 		json_for_each_item append_venue_url venue_url
 		json_for_each_item append_nai_realm nai_realm
 		json_for_each_item append_hs20_conn_capab hs20_conn_capab
-		json_for_each_item append_hs20_oper_friendly_name hs20_oper_friendly_name
 		json_for_each_item append_osu_provider osu_provider
 		json_for_each_item append_operator_icon operator_icon
 		[ -n "$interworking" ] && append bss_conf "interworking=$interworking" "$N"
@@ -972,7 +1010,7 @@ hostapd_set_bss_options() {
 		[ "$uesa" -gt 0 ] && append bss_conf "uesa=$uesa" "$N"
 		[ "$venue_group" -gt 0 ] && append bss_conf "venue_group=$venue_group" "$N"
 		[ "$venue_type" -gt 0 ] && append bss_conf "venue_type=$venue_type" "$N"
-		[ "$ipaddr_type_availability" -gt 0 ] && append bss_conf "ipaddr_type_availability=$ipaddr_type_availability" "$N"
+		[ -n "$ipaddr_type_availability" ] && append bss_conf "ipaddr_type_availability=$ipaddr_type_availability" "$N"
 		[ "$gas_address3" -gt 0 ] && append bss_conf "gas_address3=$gas_address3" "$N"
 		[ -n "$hessid" ] && append bss_conf "hessid=$hessid" "$N"
 		[ -n "$network_auth_type" ] && append bss_conf "network_auth_type=$network_auth_type" "$N"

feeds/wifi-ax/hostapd/patches/f00-011-ubus-multi-bss-chan-switch.patch

@@ -0,0 +1,24 @@
+--- a/src/ap/ubus.c
++++ b/src/ap/ubus.c
+@@ -722,6 +722,7 @@ hostapd_switch_chan(struct ubus_context
+ 	struct blob_attr *tb[__CSA_MAX];
+ 	struct hostapd_data *hapd = get_hapd_from_object(obj);
+ 	struct csa_settings css;
++	int i;
+ 
+ 	blobmsg_parse(csa_policy, __CSA_MAX, tb, blob_data(msg), blob_len(msg));
+ 
+@@ -746,9 +747,10 @@ hostapd_switch_chan(struct ubus_context
+ 	SET_CSA_SETTING(CSA_VHT, freq_params.vht_enabled, bool);
+ 	SET_CSA_SETTING(CSA_BLOCK_TX, block_tx, bool);
+ 
+-
+-	if (hostapd_switch_channel(hapd, &css) != 0)
+-		return UBUS_STATUS_NOT_SUPPORTED;
++	for (i = 0; i < hapd->iface->num_bss; i++) {
++		if (hostapd_switch_channel(hapd->iface->bss[i], &css) != 0)
++			return UBUS_STATUS_NOT_SUPPORTED;
++	}
+ 	return UBUS_STATUS_OK;
+ #undef SET_CSA_SETTING
+ }

feeds/wifi-ax/hostapd/patches/f00-012-hapd-ubus-channel-switch-event.patch

@@ -0,0 +1,186 @@
+--- a/src/ap/dfs.c
++++ b/src/ap/dfs.c
+@@ -19,7 +19,7 @@
+ #include "dfs.h"
+ #include "beacon.h"
+ #include "eloop.h"
+-
++#include "ubus.h"
+ 
+ static int dfs_get_used_n_chans(struct hostapd_iface *iface, int *seg1)
+ {
+@@ -1207,6 +1207,11 @@ static int hostapd_dfs_start_channel_swi
+ 			break;
+ 	}
+ 
++	if (!err) {
++		wpa_printf(MSG_DEBUG, "Reporting DFS event to ubus");
++		hostapd_ubus_handle_channel_switch_event(iface, HOSTAPD_UBUS_DFS_SWITCH,  channel->freq);
++	}
++
+ 	if (err) {
+ 		wpa_printf(MSG_WARNING, "DFS failed to schedule CSA (%d) - trying fallback",
+ 			   err);
+--- a/src/ap/ubus.c
++++ b/src/ap/ubus.c
+@@ -29,6 +29,8 @@ static int ctx_ref;
+ static char** bss_lst = NULL;
+ static size_t bss_nr = 0;
+ 
++static LIST_HEAD(chan_events);
++
+ static inline struct hapd_interfaces *get_hapd_interfaces_from_object(struct ubus_object *obj)
+ {
+ 	return container_of(obj, struct hapd_interfaces, ubus);
+@@ -714,6 +716,42 @@ static int hostapd_sessions(struct ubus_
+ 	return 0;
+ }
+ 
++static int hostapd_get_chan_switch_events(struct ubus_context *ctx,
++					  struct ubus_object *obj,
++					  struct ubus_request_data *req,
++					  const char *method,
++					  struct blob_attr *msg)
++{
++	void *a = NULL;
++	void *t = NULL;
++	struct hostapd_chan_event_list *entry, *tmp;
++
++	blob_buf_init(&b_ev, 0);
++	a = blobmsg_open_table(&b_ev, "chan_switch_event");
++	list_for_each_entry(entry, &chan_events, list) {
++		t = blobmsg_open_table(&b_ev, "event");
++		blobmsg_add_u32(&b_ev, "radio_name", entry->records.band);
++		blobmsg_add_u32(&b_ev, "reason", entry->records.reason);
++		blobmsg_add_u64(&b_ev, "timestamp", entry->records.ts);
++		blobmsg_add_u32(&b_ev, "frequency", entry->records.freq);
++		blobmsg_close_table(&b_ev, t);
++	}
++
++	blobmsg_close_table(&b_ev, a);
++	ubus_send_reply(ctx, req, b_ev.head);
++
++	/*delete list*/
++
++	if (!list_empty(&chan_events)) {
++		list_for_each_entry_safe(entry, tmp, &chan_events, list) {
++			list_del(&entry->list);
++			free(entry);
++		}
++	}
++
++	return 0;
++}
++
+ static int
+ hostapd_switch_chan(struct ubus_context *ctx, struct ubus_object *obj,
+ 		    struct ubus_request_data *req, const char *method,
+@@ -751,6 +789,9 @@ hostapd_switch_chan(struct ubus_context
+ 		if (hostapd_switch_channel(hapd->iface->bss[i], &css) != 0)
+ 			return UBUS_STATUS_NOT_SUPPORTED;
+ 	}
++
++	hostapd_ubus_handle_channel_switch_event(hapd->iface, HOSTAPD_UBUS_HIGH_INTERFERENCE, css.freq_params.freq);
++
+ 	return UBUS_STATUS_OK;
+ #undef SET_CSA_SETTING
+ }
+@@ -1446,6 +1487,7 @@ static const struct ubus_method daemon_m
+ 	UBUS_METHOD("config_add", hostapd_config_add, config_add_policy),
+ 	UBUS_METHOD("config_remove", hostapd_config_remove, config_remove_policy),
+ 	UBUS_METHOD_NOARG("get_bss_list", hostapd_get_bss_list),
++	UBUS_METHOD_NOARG("get_chan_switch_events", hostapd_get_chan_switch_events),
+ };
+ 
+ static struct ubus_object_type daemon_object_type =
+@@ -1509,6 +1551,26 @@ ubus_event_cb(struct ubus_notify_request
+ 	ureq->resp = ret;
+ }
+ 
++void hostapd_ubus_handle_channel_switch_event(struct hostapd_iface *iface, int reason,
++					      int freq)
++{
++	struct hostapd_chan_event_list *rec = NULL;
++	struct timespec ts;
++	uint64_t timestamp = 0;
++
++	clock_gettime(CLOCK_REALTIME, &ts);
++	timestamp = get_time_in_ms(&ts);
++
++	rec = os_zalloc(sizeof(struct hostapd_chan_event_list));
++
++	rec->records.reason = reason;
++	rec->records.band = iface->freq;
++	rec->records.ts = timestamp;
++	rec->records.freq = freq;
++
++	list_add_tail(&rec->list, &chan_events);
++}
++
+ int hostapd_ubus_handle_rt_event(struct hostapd_data *hapd,
+ 				 struct hostapd_ubus_request *req)
+ {
+--- a/src/ap/ubus.h
++++ b/src/ap/ubus.h
+@@ -17,9 +17,15 @@ enum hostapd_ubus_event_type {
+ 	HOSTAPD_UBUS_DEAUTH_REQ,
+ 	HOSTAPD_UBUS_FDATA_REQ,
+ 	HOSTAPD_UBUS_IP_REQ,
++	HOSTAPD_UBUS_CHAN_SWITCH,
+ 	HOSTAPD_UBUS_TYPE_MAX
+ };
+ 
++enum hostapd_ubus_chan_event_reason {
++	HOSTAPD_UBUS_DFS_SWITCH,
++	HOSTAPD_UBUS_HIGH_INTERFERENCE
++};
++
+ struct hostapd_ubus_request {
+ 	enum hostapd_ubus_event_type type;
+ 	const struct ieee80211_mgmt *mgmt_frame;
+@@ -40,6 +46,7 @@ struct rrm_measurement_beacon_report;
+ 
+ #include <libubox/avl.h>
+ #include <libubus.h>
++#include <libubox/list.h>
+ 
+ struct hostapd_ubus_bss {
+ 	struct ubus_object obj;
+@@ -121,11 +128,24 @@ struct hostapd_event_avl_rec {
+ 	struct avl_node avl;
+ };
+ 
++struct channel_switch_event {
++	int band; /* Radio name*/
++	uint8_t reason;
++	uint64_t ts;
++	uint32_t freq;
++};
++
++struct hostapd_chan_event_list {
++	struct channel_switch_event records;
++	struct list_head list;
++};
++
+ void hostapd_ubus_add_iface(struct hostapd_iface *iface);
+ void hostapd_ubus_free_iface(struct hostapd_iface *iface);
+ void hostapd_ubus_add_bss(struct hostapd_data *hapd);
+ void hostapd_ubus_free_bss(struct hostapd_data *hapd);
+-
++void hostapd_ubus_handle_channel_switch_event(struct hostapd_iface *iface,
++					      int reason, int channel);
+ int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_request *req);
+ int hostapd_ubus_handle_rt_event(struct hostapd_data *hapd, struct hostapd_ubus_request *req);
+ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *mac);
+@@ -157,6 +177,11 @@ static inline void hostapd_ubus_free_bss
+ {
+ }
+ 
++static inline void hostapd_ubus_handle_channel_switch_event(struct hostapd_iface *iface,
++							    int reason, int channel)
++{
++}
++
+ static inline int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_request *req)
+ {
+ 	return 0;

feeds/wifi-ax/hostapd/patches/f00-013-hapd-del_sta_before_add_if_sta_already_exist.patch

@@ -0,0 +1,28 @@
+Index: hostapd-2020-06-08-5a8b3662/src/ap/ieee802_11.c
+===================================================================
+--- hostapd-2020-06-08-5a8b3662.orig/src/ap/ieee802_11.c
++++ hostapd-2020-06-08-5a8b3662/src/ap/ieee802_11.c
+@@ -3675,6 +3675,13 @@ static int add_associated_sta(struct hos
+ 	 * drivers to accept the STA parameter configuration. Since this is
+ 	 * after a new FT-over-DS exchange, a new TK has been derived, so key
+ 	 * reinstallation is not a concern for this case.
++	 *
++	 * If the STA was associated and authorized earlier, but came for a new
++	 * connection (!added_unassoc + !reassoc), remove the existing STA entry
++	 * so that it can be re-added. This case is rarely seen when the AP could
++	 * not receive the deauth/disassoc frame from the STA. And the STA comes
++	 * back with new connection within a short period or before the inactive
++	 * STA entry is removed from the list.
+ 	 */
+ 	wpa_printf(MSG_DEBUG, "Add associated STA " MACSTR
+ 		   " (added_unassoc=%d auth_alg=%u ft_over_ds=%u reassoc=%d authorized=%d ft_tk=%d fils_tk=%d)",
+@@ -3688,7 +3695,8 @@ static int add_associated_sta(struct hos
+ 	    (!(sta->flags & WLAN_STA_AUTHORIZED) ||
+ 	     (reassoc && sta->ft_over_ds && sta->auth_alg == WLAN_AUTH_FT) ||
+ 	     (!wpa_auth_sta_ft_tk_already_set(sta->wpa_sm) &&
+-	      !wpa_auth_sta_fils_tk_already_set(sta->wpa_sm)))) {
++	      !wpa_auth_sta_fils_tk_already_set(sta->wpa_sm)) ||
++	     (!reassoc && (sta->flags & WLAN_STA_AUTHORIZED)))) {
+ 		hostapd_drv_sta_remove(hapd, sta->addr);
+ 		wpa_auth_sm_event(sta->wpa_sm, WPA_DRV_STA_REMOVED);
+ 		set = 0;

feeds/wifi-ax/hostapd/patches/f00-014-fix-ubus-assoc.patch

@@ -0,0 +1,32 @@
+--- a/src/ap/ieee802_11.c
++++ b/src/ap/ieee802_11.c
+@@ -4463,6 +4463,14 @@ static void handle_assoc(struct hostapd_
+ 			ieee802_11_set_beacons(hapd->iface);
+ 	}
+ 
++	ubus_resp = hostapd_ubus_handle_event(hapd, &req);
++	if (ubus_resp) {
++		wpa_printf(MSG_DEBUG, "Station " MACSTR " assoc rejected by ubus handler.\n",
++		       MAC2STR(mgmt->sa));
++		resp = ubus_resp > 0 ? (u16) ubus_resp : WLAN_STATUS_UNSPECIFIED_FAILURE;
++		goto fail;
++	}
++
+ 	update_ht_state(hapd, sta);
+ 
+ 	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
+@@ -4568,14 +4576,6 @@ static void handle_assoc(struct hostapd_
+ 					    pos, left, rssi, omit_rsnxe);
+ 	os_free(tmp);
+ 
+-	ubus_resp = hostapd_ubus_handle_event(hapd, &req);
+-	if (ubus_resp) {
+-		wpa_printf(MSG_DEBUG, "Station " MACSTR " assoc rejected by ubus handler.\n",
+-		       MAC2STR(mgmt->sa));
+-		resp = ubus_resp > 0 ? (u16) ubus_resp : WLAN_STATUS_UNSPECIFIED_FAILURE;
+-		goto fail;
+-	}
+-
+ 	/*
+ 	 * Remove the station in case tranmission of a success response fails
+ 	 * (the STA was added associated to the driver) or if the station was

feeds/wifi-ax/hostapd/patches/f00-015-ubus-change-conf-param.patch

@@ -0,0 +1,68 @@
+Index: hostapd-2020-07-02-58b384f4/src/ap/ubus.c
+===================================================================
+--- hostapd-2020-07-02-58b384f4.orig/src/ap/ubus.c
++++ hostapd-2020-07-02-58b384f4/src/ap/ubus.c
+@@ -1483,7 +1483,63 @@ static int hostapd_get_bss_list(struct u
+ 	return 0;
+ }
+ 
++enum {
++	MOD_IFACE,
++	MOD_PARAM,
++	MOD_PARAM_VAL,
++	__PARAM_MAX
++};
++
++static const struct blobmsg_policy mod_param_policy[__PARAM_MAX] = {
++	[MOD_IFACE] = { "iface", BLOBMSG_TYPE_STRING },
++	[MOD_PARAM] = { "param", BLOBMSG_TYPE_STRING },
++	[MOD_PARAM_VAL] = { "param_val", BLOBMSG_TYPE_STRING },
++};
++
++
++static int
++hostapd_param_modify(struct ubus_context *ctx, struct ubus_object *obj,
++		   struct ubus_request_data *req, const char *method,
++		   struct blob_attr *msg)
++{
++	struct blob_attr *tb[__PARAM_MAX];
++	struct hapd_interfaces *interfaces = NULL;
++	struct hostapd_data *hapd_bss = NULL;
++	struct hostapd_config *iconf = NULL;
++	struct hostapd_iface *iface = NULL;
++	size_t i = 0;
++
++	interfaces = get_hapd_interfaces_from_object(obj);
++	blobmsg_parse(mod_param_policy, __PARAM_MAX, tb, blob_data(msg),
++		      blob_len(msg));
++
++	if (!tb[MOD_PARAM] || !tb[MOD_IFACE] || !tb[MOD_PARAM_VAL])
++		return UBUS_STATUS_INVALID_ARGUMENT;
++
++	wpa_printf(MSG_DEBUG, "Modifyint %s=%s for %s",
++		blobmsg_get_string(tb[MOD_PARAM]),
++		blobmsg_get_string(tb[MOD_PARAM_VAL]),
++		blobmsg_get_string(tb[MOD_IFACE]));
++	
++	hapd_bss = hostapd_get_iface(interfaces,
++				     blobmsg_get_string(tb[MOD_IFACE]));
++
++	if (hapd_bss) {
++		iconf = hapd_bss->iconf;
++		if (os_strcmp(blobmsg_get_string(tb[MOD_PARAM]),
++			      "rssi_ignore_probe_request") == 0) {
++			iconf->rssi_ignore_probe_request = atoi(blobmsg_get_string(tb[MOD_PARAM_VAL]));
++
++		}
++	}
++
++	return UBUS_STATUS_OK;
++}
++
++
++
+ static const struct ubus_method daemon_methods[] = {
++	UBUS_METHOD("param_mod", hostapd_param_modify, mod_param_policy),
+ 	UBUS_METHOD("config_add", hostapd_config_add, config_add_policy),
+ 	UBUS_METHOD("config_remove", hostapd_config_remove, config_remove_policy),
+ 	UBUS_METHOD_NOARG("get_bss_list", hostapd_get_bss_list),

feeds/wifi-ax/hostapd/patches/f00-016-hapd-create_new_session_if_id_is_0.patch

@@ -0,0 +1,14 @@
+Index: hostapd-2020-07-02-58b384f4/src/ap/ubus.c
+===================================================================
+--- hostapd-2020-07-02-58b384f4.orig/src/ap/ubus.c
++++ hostapd-2020-07-02-58b384f4/src/ap/ubus.c
+@@ -1655,7 +1655,8 @@ int hostapd_ubus_handle_rt_event(struct
+ 	session_id = sta->cl_session_id;
+ 
+ 	/* find by session id */
+-	rec = avl_find_element(&hapd->ubus.rt_events, &session_id, rec, avl);
++	if (session_id)
++		rec = avl_find_element(&hapd->ubus.rt_events, &session_id, rec, avl);
+ 
+ 	/* prepare rec if not found */
+ 	if (!rec) {

feeds/wifi-ax/hostapd/patches/f00-017-ubus-add-he-chan-switch.patch

@@ -0,0 +1,28 @@
+Index: hostapd-2020-07-02-58b384f4/src/ap/ubus.c
+===================================================================
+--- hostapd-2020-07-02-58b384f4.orig/src/ap/ubus.c
++++ hostapd-2020-07-02-58b384f4/src/ap/ubus.c
+@@ -528,6 +528,7 @@ enum {
+ 	CSA_SEC_CHANNEL_OFFSET,
+ 	CSA_HT,
+ 	CSA_VHT,
++	CSA_HE,
+ 	CSA_BLOCK_TX,
+ 	__CSA_MAX
+ };
+@@ -541,6 +542,7 @@ static const struct blobmsg_policy csa_p
+ 	[CSA_SEC_CHANNEL_OFFSET] = { "sec_channel_offset", BLOBMSG_TYPE_INT32 },
+ 	[CSA_HT] = { "ht", BLOBMSG_TYPE_BOOL },
+ 	[CSA_VHT] = { "vht", BLOBMSG_TYPE_BOOL },
++	[CSA_HE] = { "he", BLOBMSG_TYPE_BOOL },
+ 	[CSA_BLOCK_TX] = { "block_tx", BLOBMSG_TYPE_BOOL },
+ };
+ 
+@@ -783,6 +785,7 @@ hostapd_switch_chan(struct ubus_context
+ 	SET_CSA_SETTING(CSA_SEC_CHANNEL_OFFSET, freq_params.sec_channel_offset, u32);
+ 	SET_CSA_SETTING(CSA_HT, freq_params.ht_enabled, bool);
+ 	SET_CSA_SETTING(CSA_VHT, freq_params.vht_enabled, bool);
++	SET_CSA_SETTING(CSA_HE, freq_params.he_enabled, bool);
+ 	SET_CSA_SETTING(CSA_BLOCK_TX, block_tx, bool);
+ 
+ 	for (i = 0; i < hapd->iface->num_bss; i++) {

feeds/wifi-ax/hostapd/patches/f00-018-ubus-add-dfs-channel-switch.patch

@@ -0,0 +1,299 @@
+Index: hostapd-2020-07-02-58b384f4/src/ap/ubus.c
+===================================================================
+--- hostapd-2020-07-02-58b384f4.orig/src/ap/ubus.c
++++ hostapd-2020-07-02-58b384f4/src/ap/ubus.c
+@@ -21,6 +21,7 @@
+ #include "rrm.h"
+ #include "wnm_ap.h"
+ #include "taxonomy.h"
++#include "common/hw_features_common.h"
+ 
+ static struct ubus_context *ctx;
+ static struct blob_buf b;
+@@ -754,6 +755,207 @@ static int hostapd_get_chan_switch_event
+ 	return 0;
+ }
+ 
++#define HOSTAPD_DFS_CSA_DUR 1
++int csa_ch_id, csa_cf0_id, csa_cf1_id = 0;
++int csa_bw = CHANWIDTH_USE_HT;
++struct csa_settings css;
++
++struct hostapd_channel_data *freq_to_chan(struct hostapd_iface *iface, int freq)
++{
++	struct hostapd_hw_modes *mode;
++	struct hostapd_channel_data *chan;
++	int i;
++
++	mode = iface->current_mode;
++	if (mode == NULL || freq == 0) {
++		wpa_printf(MSG_INFO, "%s: mode is NULL", __func__);
++		return NULL;
++	}
++
++	for (i = 0; i < iface->current_mode->num_channels; i++) {
++		chan = &iface->current_mode->channels[i];
++		if (chan->freq == freq) {
++			return chan; /* Channel found */
++		}
++	}
++	return NULL;
++}
++
++void hostapd_dfs_csa_timeout(void *eloop_data, void *user_data)
++{
++	struct hostapd_data *hapd = eloop_data;
++	struct hostapd_iface *iface = hapd->iface;
++	struct csa_settings *css = user_data;	
++	int ret = 0;
++
++	wpa_printf(MSG_DEBUG, "%s Stopping CSA in dfs ", __func__);
++
++	hapd->csa_in_progress = 0;
++
++	hostapd_disable_iface(iface);
++
++	iface->freq = css->freq_params.freq;
++	iface->conf->channel = csa_ch_id;
++	iface->conf->secondary_channel = css->freq_params.sec_channel_offset;
++	hostapd_set_oper_centr_freq_seg0_idx(iface->conf, csa_cf0_id);
++	hostapd_set_oper_centr_freq_seg1_idx(iface->conf, csa_cf1_id);
++	hostapd_set_oper_chwidth(iface->conf, csa_bw);
++	iface->conf->ieee80211n = css->freq_params.ht_enabled;
++	iface->conf->ieee80211ac = css->freq_params.vht_enabled;
++	iface->conf->ieee80211ax = css->freq_params.he_enabled;
++	wpa_printf(MSG_INFO, "%s: freq=%d chan=%d sec_ch=%d cf0=%d cf1=%d bw=%d 11n=%d, ac=%d, ax=%d",
++ 		   __func__, iface->freq, iface->conf->channel,
++		   iface->conf->secondary_channel, csa_cf0_id, csa_cf1_id, 
++		   css->freq_params.bandwidth, iface->conf->ieee80211n,
++		   iface->conf->ieee80211ac, iface->conf->ieee80211ax);
++
++	ret = hostapd_enable_iface(iface);
++	if (ret == 0)
++		hostapd_ubus_handle_channel_switch_event(iface,
++						HOSTAPD_UBUS_HIGH_INTERFERENCE,
++						iface->freq);
++}
++
++int hostapd_dfs_set_beacon_csa(struct hostapd_iface *iface, struct csa_settings *css)
++{
++	struct hostapd_data *hapd = iface->bss[0];
++	struct hostapd_data *hapd_bss = NULL;
++	struct csa_settings csa_settings;
++	int secondary_channel = 0;
++	u8 vht_oper_centr_freq_seg0_idx;
++	u8 vht_oper_centr_freq_seg1_idx;
++	int err = 0, i = 0;
++
++	if (hapd->csa_in_progress == 1) {
++		wpa_printf(MSG_ERROR, "CSA in progress, cannot switch channel");
++		return -1;
++	}
++
++	eloop_cancel_timeout(hostapd_dfs_csa_timeout, hapd, NULL);
++
++	/* Setup Beacon CSA request */
++	secondary_channel = iface->conf->secondary_channel;
++	vht_oper_centr_freq_seg0_idx =
++			iface->conf->vht_oper_centr_freq_seg0_idx;
++	vht_oper_centr_freq_seg1_idx =
++			iface->conf->vht_oper_centr_freq_seg1_idx;
++
++	os_memset(&csa_settings, 0, sizeof(csa_settings));
++	err = hostapd_set_freq_params(&csa_settings.freq_params,
++				      iface->conf->hw_mode,
++				      iface->freq,
++				      iface->conf->channel,
++				      iface->conf->enable_edmg,
++				      iface->conf->edmg_channel,
++				      iface->conf->ieee80211n,
++				      iface->conf->ieee80211ac,
++				      iface->conf->ieee80211ax,
++				      secondary_channel,
++				      hostapd_get_oper_chwidth(iface->conf),
++				      vht_oper_centr_freq_seg0_idx,
++				      vht_oper_centr_freq_seg1_idx,
++				      iface->current_mode->vht_capab,
++				      &iface->current_mode->he_capab[IEEE80211_MODE_AP]);
++	if (err) {
++		wpa_printf(MSG_ERROR, "DFS failed to calculate CSA freq params");
++		return -1;
++	}
++
++	if (!(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_AP_CSA)) {
++		wpa_printf(MSG_ERROR, "CSA is not supported");
++		return -1;
++	}
++
++	/* Set Beacon */
++	for (i = 0; i < hapd->iface->num_bss; i++) {
++		hapd_bss = iface->bss[i];
++		hapd_bss->cs_freq_params = csa_settings.freq_params;
++		hapd_bss->cs_count = css->cs_count;
++		hapd_bss->cs_block_tx = css->block_tx;
++		err = ieee802_11_set_beacon(hapd_bss);
++		if (err)
++			wpa_printf(MSG_ERROR, "CSA beacon set failed, changing channel without an Announcement");
++	}
++
++	hapd->csa_in_progress = 1;
++
++	/* Switch Channel after a timeout */
++	eloop_register_timeout(HOSTAPD_DFS_CSA_DUR, 0,
++			       hostapd_dfs_csa_timeout, hapd, css);
++
++	return 0;
++}
++
++int hostapd_switch_chan_dfs(struct hostapd_iface *iface,
++			     struct csa_settings *css)
++{
++	struct hostapd_channel_data *ch, *cf1, *cf2 = NULL;
++	int res = 0;
++
++	if (iface == NULL)
++		return -1;
++
++	/* Set channel id and center frequecies id */
++	if (css->freq_params.freq > 0) {
++		ch = freq_to_chan(iface, css->freq_params.freq);
++		csa_ch_id = ch->chan;
++	}
++
++	if (css->freq_params.center_freq1 > 0) {
++		csa_cf0_id = 36 + (css->freq_params.center_freq1 - 5180) / 5;
++	}
++
++	if (css->freq_params.center_freq2 > 0) {
++		csa_cf1_id = 36 + (css->freq_params.center_freq2 - 5180) / 5;
++	}
++
++	wpa_printf(MSG_DEBUG, "%s freq=%d chan=%d sec_chan=%d, width=%d, seg0=%d, seg1=%d, cac_time=%ds, ieee80211n=%d, ieee80211ac=%d, ieee80211ax=%d ", __func__,
++		css->freq_params.freq,
++		csa_ch_id, css->freq_params.sec_channel_offset,
++		css->freq_params.bandwidth, csa_cf0_id, csa_cf1_id,
++		iface->dfs_cac_ms / 1000, iface->conf->ieee80211n,
++		iface->conf->ieee80211ac, iface->conf->ieee80211ax);
++
++	/* Set bandwidth */
++	switch (css->freq_params.bandwidth) {
++	case 0:
++	case 20:
++	case 40:
++		csa_bw = CHANWIDTH_USE_HT;
++		break;
++	case 80:
++		if (css->freq_params.center_freq2)
++			csa_bw = CHANWIDTH_80P80MHZ;
++		else
++			csa_bw = CHANWIDTH_80MHZ;
++		break;
++	case 160:
++		csa_bw = CHANWIDTH_160MHZ;
++		break;
++	default:
++		wpa_printf(MSG_WARNING, "Unknown CSA bandwidth: %d",
++			   css->freq_params.bandwidth);
++		break;
++	}
++
++	/* Set new frequency info */
++	iface->freq = css->freq_params.freq;
++	iface->conf->channel = csa_ch_id;
++	iface->conf->secondary_channel = css->freq_params.sec_channel_offset;
++	hostapd_set_oper_centr_freq_seg0_idx(iface->conf, csa_cf0_id);
++	hostapd_set_oper_centr_freq_seg1_idx(iface->conf, csa_cf1_id);
++	hostapd_set_oper_chwidth(iface->conf, csa_bw);
++	iface->conf->ieee80211n = css->freq_params.ht_enabled;
++	iface->conf->ieee80211ac = css->freq_params.vht_enabled;
++	iface->conf->ieee80211ax = css->freq_params.he_enabled;
++
++	/*Set beacon for CSA*/
++	hostapd_dfs_set_beacon_csa(iface, css);
++
++	return 0;
++
++}
++
+ static int
+ hostapd_switch_chan(struct ubus_context *ctx, struct ubus_object *obj,
+ 		    struct ubus_request_data *req, const char *method,
+@@ -761,14 +963,19 @@ hostapd_switch_chan(struct ubus_context
+ {
+ 	struct blob_attr *tb[__CSA_MAX];
+ 	struct hostapd_data *hapd = get_hapd_from_object(obj);
+-	struct csa_settings css;
++	struct hostapd_iface *iface = hapd->iface;
++	struct hostapd_channel_data *chan =NULL;
+ 	int i;
++	int freq = 0;
+ 
+ 	blobmsg_parse(csa_policy, __CSA_MAX, tb, blob_data(msg), blob_len(msg));
+ 
+ 	if (!tb[CSA_FREQ])
+ 		return UBUS_STATUS_INVALID_ARGUMENT;
+ 
++	freq = blobmsg_get_u32(tb[CSA_FREQ]);
++	chan = freq_to_chan(iface, freq);
++
+ 	memset(&css, 0, sizeof(css));
+ 	css.freq_params.freq = blobmsg_get_u32(tb[CSA_FREQ]);
+ 
+@@ -788,6 +995,21 @@ hostapd_switch_chan(struct ubus_context
+ 	SET_CSA_SETTING(CSA_HE, freq_params.he_enabled, bool);
+ 	SET_CSA_SETTING(CSA_BLOCK_TX, block_tx, bool);
+ 
++	wpa_printf(MSG_INFO, "%s: CSS freq=%d chan=%d sec_chan_off=%d, width=%d, seg0=%d, seg1=%d", __func__,
++		css.freq_params.freq,
++		chan->chan, css.freq_params.sec_channel_offset,
++		css.freq_params.bandwidth,
++		css.freq_params.center_freq1,
++		css.freq_params.center_freq2);
++
++	if ((chan->flag & HOSTAPD_CHAN_RADAR) &&
++	    ((chan->flag & HOSTAPD_CHAN_DFS_MASK)
++	     != HOSTAPD_CHAN_DFS_AVAILABLE)) {
++		wpa_printf(MSG_INFO, "%s: DFS chan need CAC", __func__);
++		hostapd_switch_chan_dfs(iface, &css);
++		return UBUS_STATUS_OK;
++	}
++
+ 	for (i = 0; i < hapd->iface->num_bss; i++) {
+ 		if (hostapd_switch_channel(hapd->iface->bss[i], &css) != 0)
+ 			return UBUS_STATUS_NOT_SUPPORTED;
+@@ -1454,10 +1676,16 @@ void hostapd_ubus_free_bss(struct hostap
+ 	}
+ 
+ 	free(name);
+-	for (size_t i = 0; i < bss_nr; i++)
+-		os_free(bss_lst[i]);
+-	free(bss_lst);
+-	bss_lst = NULL;
++
++	if (bss_lst != NULL) {
++		for (size_t i = 0; i < bss_nr; i++) {
++			os_free(bss_lst[i]);
++			bss_lst[i] = NULL;
++		}
++		free(bss_lst);
++		bss_lst = NULL;
++		bss_nr = 0;
++	}
+ }
+ 
+ static int hostapd_get_bss_list(struct ubus_context *ctx,
+@@ -1477,9 +1705,11 @@ static int hostapd_get_bss_list(struct u
+ 	a = blobmsg_open_array(&b_ev, "bss_list");
+ 	/* check bss list from hapd */
+ 	for (size_t i = 0; i < bss_nr; i++) {
+-		b = blobmsg_open_table(&b_ev, NULL);
+-		blobmsg_add_string(&b_ev, "name", bss_lst[i]);
+-		blobmsg_close_table(&b_ev, b);
++		if (bss_lst[i] != NULL) {
++			b = blobmsg_open_table(&b_ev, NULL);
++			blobmsg_add_string(&b_ev, "name", bss_lst[i]);
++			blobmsg_close_table(&b_ev, b);
++		}
+ 	}
+ 	blobmsg_close_array(&b_ev, a);
+ 	ubus_send_reply(ctx, req, b_ev.head);

feeds/wifi-ax/hostapd/patches/f00-019-channel-switch-event.patch

@@ -0,0 +1,64 @@
+--- a/src/ap/ubus.c
++++ b/src/ap/ubus.c
+@@ -531,6 +531,7 @@ enum {
+ 	CSA_VHT,
+ 	CSA_HE,
+ 	CSA_BLOCK_TX,
++	CSA_REASON,
+ 	__CSA_MAX
+ };
+ 
+@@ -545,6 +546,7 @@ static const struct blobmsg_policy csa_p
+ 	[CSA_VHT] = { "vht", BLOBMSG_TYPE_BOOL },
+ 	[CSA_HE] = { "he", BLOBMSG_TYPE_BOOL },
+ 	[CSA_BLOCK_TX] = { "block_tx", BLOBMSG_TYPE_BOOL },
++	[CSA_REASON] = { "reason", BLOBMSG_TYPE_INT32 },
+ };
+ 
+ #ifdef NEED_AP_MLME
+@@ -810,7 +812,7 @@ void hostapd_dfs_csa_timeout(void *eloop
+ 		   iface->conf->ieee80211ac, iface->conf->ieee80211ax);
+ 
+ 	ret = hostapd_enable_iface(iface);
+-	if (ret == 0)
++	if (ret == 0 && css->reason == 0)
+ 		hostapd_ubus_handle_channel_switch_event(iface,
+ 						HOSTAPD_UBUS_HIGH_INTERFERENCE,
+ 						iface->freq);
+@@ -994,6 +996,7 @@ hostapd_switch_chan(struct ubus_context
+ 	SET_CSA_SETTING(CSA_VHT, freq_params.vht_enabled, bool);
+ 	SET_CSA_SETTING(CSA_HE, freq_params.he_enabled, bool);
+ 	SET_CSA_SETTING(CSA_BLOCK_TX, block_tx, bool);
++	SET_CSA_SETTING(CSA_REASON, reason, u32);
+ 
+ 	wpa_printf(MSG_INFO, "%s: CSS freq=%d chan=%d sec_chan_off=%d, width=%d, seg0=%d, seg1=%d", __func__,
+ 		css.freq_params.freq,
+@@ -1015,7 +1018,9 @@ hostapd_switch_chan(struct ubus_context
+ 			return UBUS_STATUS_NOT_SUPPORTED;
+ 	}
+ 
+-	hostapd_ubus_handle_channel_switch_event(hapd->iface, HOSTAPD_UBUS_HIGH_INTERFERENCE, css.freq_params.freq);
++	if (css.reason == 0) {
++		hostapd_ubus_handle_channel_switch_event(hapd->iface, HOSTAPD_UBUS_HIGH_INTERFERENCE, css.freq_params.freq);
++	}
+ 
+ 	return UBUS_STATUS_OK;
+ #undef SET_CSA_SETTING
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -2404,6 +2404,7 @@ struct beacon_data {
+  * @freq_params: Next channel frequency parameter
+  * @beacon_csa: Beacon/probe resp/asooc resp info for CSA period
+  * @beacon_after: Next beacon/probe resp/asooc resp info
++ * @reason: The reason why we are switching the channel
+  * @counter_offset_beacon: Offset to the count field in beacon's tail
+  * @counter_offset_presp: Offset to the count field in probe resp.
+  */
+@@ -2414,6 +2415,7 @@ struct csa_settings {
+ 	struct hostapd_freq_params freq_params;
+ 	struct beacon_data beacon_csa;
+ 	struct beacon_data beacon_after;
++	u32 reason;
+ 
+ 	u16 counter_offset_beacon[2];
+ 	u16 counter_offset_presp[2];

feeds/wifi-ax/hostapd/patches/f00-019-ubus-fix-client-events.patch

@@ -0,0 +1,112 @@
+--- a/src/ap/ubus.c
++++ b/src/ap/ubus.c
+@@ -580,6 +580,7 @@ static int hostapd_clear_session(struct
+ 	{
+ 		if (session_id == rec->session_id) {
+ 			/* dec counter and delete */
++			wpa_printf(MSG_INFO, "%s Deleting client session with session id %llu", __func__, session_id);
+ 			cached_events_nr -= rec->rec_nr;
+ 			avl_delete(&hapd->ubus.rt_events, &rec->avl);
+ 			os_free(rec->records);
+@@ -633,6 +634,11 @@ static int hostapd_sessions(struct ubus_
+ 		/* messages for current session */
+ 		for (size_t i = 0; i < rec->rec_nr; i++) {
+ 			c_rec = &rec->records[i];
++			if (c_rec->processed) {
++				/* Record is already reported, continue */
++				continue;
++			}
++
+ 			/* check message type */
+ 			switch (c_rec->type) {
+ 			/* ClientAuthEvent */
+@@ -646,6 +652,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_u32(&b_ev, "auth_status", p->auth_status);
+ 				blobmsg_add_string(&b_ev, "ssid", p->ssid);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -665,6 +672,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_u8(&b_ev, "using11v", p->using11v);
+ 				blobmsg_add_string(&b_ev, "ssid", p->ssid);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -680,6 +688,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_u32(&b_ev, "internal_rc", p->internal_rc);
+ 				blobmsg_add_string(&b_ev, "ssid", p->ssid);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -693,6 +702,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_u64(&b_ev, "fdata_tx_up_ts_in_us", p->tx_ts.tv_sec * (uint64_t)1000000);
+ 				blobmsg_add_u64(&b_ev, "fdata_rx_up_ts_in_us", p->rx_ts.tv_sec * (uint64_t)1000000);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -705,6 +715,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_string(&b_ev, "sta_mac", p->sta_mac);
+ 				blobmsg_add_string(&b_ev, "ip_address", p->ip_addr);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -1912,6 +1923,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_AUTH;
+ 		rp->u.auth.session_id = rec->session_id;
++		rp->processed = false;
+ 
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+@@ -1942,6 +1954,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_ASSOC;
+ 		rp->u.assoc.session_id = rec->session_id;
++		rp->processed = false;
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+ 		/* frequency */
+@@ -1986,6 +1999,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_DISASSOC;
+ 		rp->u.disassoc.session_id = rec->session_id;
++		rp->processed = false;
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+ 		/* frequency */
+@@ -2017,6 +2031,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_FDATA;
+ 		rp->u.fdata.session_id = rec->session_id;
++		rp->processed = false;
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+ 		/* STA MAC */
+@@ -2045,6 +2060,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_IP;
+ 		rp->u.ip.session_id = rec->session_id;
++		rp->processed = false;
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+ 		/* STA MAC */
+--- a/src/ap/ubus.h
++++ b/src/ap/ubus.h
+@@ -110,6 +110,7 @@ struct client_ip_event {
+ };
+ 
+ struct client_session_record {
++	bool processed;
+ 	int type;
+ 	uint64_t timestamp;
+ 	union {

feeds/wifi-ax/mac80211/patches/pending/212-add-survey-local-bss-receive-time

@@ -0,0 +1,31 @@
+--- a/drivers/net/wireless/ath/ath11k/wmi.c
++++ b/drivers/net/wireless/ath/ath11k/wmi.c
+@@ -7339,16 +7339,18 @@
+ 
+ 	survey = &ar->survey[idx];
+ 
+-	survey->noise     = bss_ch_info_ev.noise_floor;
+-	survey->time      = div_u64(total, cc_freq_hz);
+-	survey->time_busy = div_u64(busy, cc_freq_hz);
+-	survey->time_rx   = div_u64(rx_bss, cc_freq_hz);
+-	survey->time_tx   = div_u64(tx, cc_freq_hz);
+-	survey->filled   |= (SURVEY_INFO_NOISE_DBM |
+-			     SURVEY_INFO_TIME |
+-			     SURVEY_INFO_TIME_BUSY |
+-			     SURVEY_INFO_TIME_RX |
+-			     SURVEY_INFO_TIME_TX);
++	survey->noise       = bss_ch_info_ev.noise_floor;
++	survey->time        = div_u64(total, cc_freq_hz);
++	survey->time_busy   = div_u64(busy, cc_freq_hz);
++	survey->time_rx     = div_u64(rx, cc_freq_hz);
++	survey->time_bss_rx = div_u64(rx_bss, cc_freq_hz);
++	survey->time_tx     = div_u64(tx, cc_freq_hz);
++	survey->filled     |= (SURVEY_INFO_NOISE_DBM |
++			       SURVEY_INFO_TIME |
++			       SURVEY_INFO_TIME_BUSY |
++			       SURVEY_INFO_TIME_RX |
++			       SURVEY_INFO_TIME_TX |
++			       SURVEY_INFO_TIME_BSS_RX);
+ exit:
+ 	spin_unlock_bh(&ar->data_lock);
+ 	complete(&ar->bss_survey_done);

feeds/wifi-ax/mac80211/patches/pending/212-ath11k-clear-frag-cache-on-key-install.patch

@@ -0,0 +1,84 @@
+From 0e23a88c63d6abbeaef8ec90bd29584b7c5068bd Mon Sep 17 00:00:00 2001
+From: Sriram R <srirrama@codeaurora.org>
+Date: Thu, 10 Dec 2020 14:20:50 +0530
+Subject: [PATCH] ath11k: Clear the fragment cache during key install
+
+Currently the fragment cache setup during peer assoc is
+cleared during peer delete. In case a key reinstallation
+happens with the same peer, possibilitites are same fragment cache
+where some fragments were added before key installation could be clubbed
+with fragments received after. In ideal cases where
+this could result in wrong PN since we expect all fragments to
+have incrementing PN, this behavior could be explioted
+to mix fragments of different data resulting in a proper
+unintended reassembled packet to be passed up the stack.
+
+Signed-off-by: Sriram R <srirrama@codeaurora.org>
+---
+ drivers/net/wireless/ath/ath11k/dp_rx.c | 19 +++++++++++++++++++
+ drivers/net/wireless/ath/ath11k/dp_rx.h |  1 +
+ drivers/net/wireless/ath/ath11k/mac.c   |  6 ++++++
+ 3 files changed, 26 insertions(+)
+
+diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
+index 0fa25c1..06bbd6e 100644
+--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
++++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
+@@ -844,6 +844,25 @@ static void ath11k_dp_rx_frags_cleanup(struct dp_rx_tid *rx_tid, bool rel_link_d
+ 	__skb_queue_purge(&rx_tid->rx_frags);
+ }
+ 
++void ath11k_peer_frags_flush(struct ath11k *ar, struct ath11k_peer *peer)
++{
++	struct dp_rx_tid *rx_tid;
++	int i;
++
++	lockdep_assert_held(&ar->ab->base_lock);
++
++	for (i = 0; i <= IEEE80211_NUM_TIDS; i++) {
++		rx_tid = &peer->rx_tid[i];
++
++		spin_unlock_bh(&ar->ab->base_lock);
++		del_timer_sync(&rx_tid->frag_timer);
++		spin_lock_bh(&ar->ab->base_lock);
++
++		ath11k_dp_rx_frags_cleanup(rx_tid, true);
++
++	}
++}
++
+ void ath11k_peer_rx_tid_cleanup(struct ath11k *ar, struct ath11k_peer *peer)
+ {
+ 	struct dp_rx_tid *rx_tid;
+diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.h b/drivers/net/wireless/ath/ath11k/dp_rx.h
+index f005ded..732f9a7 100644
+--- a/drivers/net/wireless/ath/ath11k/dp_rx.h
++++ b/drivers/net/wireless/ath/ath11k/dp_rx.h
+@@ -68,6 +68,7 @@ int ath11k_dp_peer_rx_pn_replay_config(struct ath11k_vif *arvif,
+ 				       const u8 *peer_addr,
+ 				       enum set_key_cmd key_cmd,
+ 				       struct ieee80211_key_conf *key);
++void ath11k_peer_frags_flush(struct ath11k *ar, struct ath11k_peer *peer);
+ void ath11k_peer_rx_tid_cleanup(struct ath11k *ar, struct ath11k_peer *peer);
+ void ath11k_peer_rx_tid_delete(struct ath11k *ar,
+ 			       struct ath11k_peer *peer, u8 tid);
+diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
+index 4c88eab..91d645e 100644
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -3707,6 +3707,12 @@ static int ath11k_mac_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ 	 */
+ 	spin_lock_bh(&ab->base_lock);
+ 	peer = ath11k_peer_find(ab, arvif->vdev_id, peer_addr);
++
++	/* flush the fragments cache during key (re)install to
++	 * ensure all frags in the new frag list  belong to the same key.
++	 */
++	if (peer && cmd == SET_KEY)
++		ath11k_peer_frags_flush(ar, peer);
+ 	spin_unlock_bh(&ab->base_lock);
+ 
+ 	if (!peer) {
+-- 
+2.7.4
+

feeds/wifi-ax/mac80211/patches/pending/213-mac80211-frag.patch

@@ -0,0 +1,242 @@
+From patchwork Tue May 11 18:02:44 2021
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Johannes Berg <johannes@sipsolutions.net>
+X-Patchwork-Id: 12251641
+X-Patchwork-Delegate: johannes@sipsolutions.net
+Return-Path: <linux-wireless-owner@kernel.org>
+X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
+	aws-us-west-2-korg-lkml-1.web.codeaurora.org
+X-Spam-Level: 
+X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00,
+	HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH,
+	MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT
+	autolearn=unavailable autolearn_force=no version=3.4.0
+Received: from mail.kernel.org (mail.kernel.org [198.145.29.99])
+	by smtp.lore.kernel.org (Postfix) with ESMTP id 5E0C4C43617
+	for <linux-wireless@archiver.kernel.org>;
+ Tue, 11 May 2021 18:03:20 +0000 (UTC)
+Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
+	by mail.kernel.org (Postfix) with ESMTP id 2E1D461625
+	for <linux-wireless@archiver.kernel.org>;
+ Tue, 11 May 2021 18:03:20 +0000 (UTC)
+Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
+        id S231693AbhEKSEZ (ORCPT
+        <rfc822;linux-wireless@archiver.kernel.org>);
+        Tue, 11 May 2021 14:04:25 -0400
+Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41156 "EHLO
+        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
+        with ESMTP id S231561AbhEKSEV (ORCPT
+        <rfc822;linux-wireless@vger.kernel.org>);
+        Tue, 11 May 2021 14:04:21 -0400
+Received: from sipsolutions.net (s3.sipsolutions.net
+ [IPv6:2a01:4f8:191:4433::2])
+        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D055CC06175F;
+        Tue, 11 May 2021 11:03:10 -0700 (PDT)
+Received: by sipsolutions.net with esmtpsa
+ (TLS1.3:ECDHE_X25519__RSA_PSS_RSAE_SHA256__AES_256_GCM:256)
+        (Exim 4.94.2)
+        (envelope-from <johannes@sipsolutions.net>)
+        id 1lgWir-007aAS-9o; Tue, 11 May 2021 20:03:09 +0200
+From: Johannes Berg <johannes@sipsolutions.net>
+To: linux-wireless@vger.kernel.org
+Cc: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>, stable@vger.kernel.org
+Subject: [PATCH 03/18] mac80211: properly handle A-MSDUs that start with an
+ RFC 1042 header
+Date: Tue, 11 May 2021 20:02:44 +0200
+Message-Id: 
+ <20210511200110.0b2b886492f0.I23dd5d685fe16d3b0ec8106e8f01b59f499dffed@changeid>
+X-Mailer: git-send-email 2.30.2
+In-Reply-To: <20210511180259.159598-1-johannes@sipsolutions.net>
+References: <20210511180259.159598-1-johannes@sipsolutions.net>
+MIME-Version: 1.0
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
+
+Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042
+header. This can occur in practice when the destination MAC address
+equals AA:AA:03:00:00:00. More importantly, this simplifies the next
+patch to mitigate A-MSDU injection attacks.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+ include/net/cfg80211.h | 4 ++--
+ net/mac80211/rx.c      | 2 +-
+ net/wireless/util.c    | 4 ++--
+ 3 files changed, 5 insertions(+), 5 deletions(-)
+
+Index: backports-20200902_001-4.4.60-931c337125/include/net/cfg80211.h
+===================================================================
+--- backports-20200902_001-4.4.60-931c337125.orig/include/net/cfg80211.h
++++ backports-20200902_001-4.4.60-931c337125/include/net/cfg80211.h
+@@ -5631,7 +5631,7 @@ unsigned int ieee80211_get_mesh_hdrlen(s
+  */
+ int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr,
+ 				  const u8 *addr, enum nl80211_iftype iftype,
+-				  u8 data_offset);
++				  u8 data_offset, bool is_amsdu);
+ 
+ /**
+  * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
+@@ -5643,7 +5643,7 @@ int ieee80211_data_to_8023_exthdr(struct
+ static inline int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
+ 					 enum nl80211_iftype iftype)
+ {
+-	return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0);
++	return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0, false);
+ }
+ 
+ /**
+Index: backports-20200902_001-4.4.60-931c337125/net/mac80211/rx.c
+===================================================================
+--- backports-20200902_001-4.4.60-931c337125.orig/net/mac80211/rx.c
++++ backports-20200902_001-4.4.60-931c337125/net/mac80211/rx.c
+@@ -6,7 +6,7 @@
+  * Copyright 2007-2010	Johannes Berg <johannes@sipsolutions.net>
+  * Copyright 2013-2014  Intel Mobile Communications GmbH
+  * Copyright(c) 2015 - 2017 Intel Deutschland GmbH
+- * Copyright (C) 2018-2020 Intel Corporation
++ * Copyright (C) 2018-2021 Intel Corporation
+  */
+ 
+ #include <linux/jiffies.h>
+@@ -2555,13 +2555,13 @@ static bool ieee80211_frame_allowed(stru
+ 	struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
+ 
+ 	/*
+-	 * Allow EAPOL frames to us/the PAE group address regardless
+-	 * of whether the frame was encrypted or not.
+-	 */
+-	if (ehdr->h_proto == rx->sdata->control_port_protocol &&
+-	    (ether_addr_equal(ehdr->h_dest, rx->sdata->vif.addr) ||
+-	     ether_addr_equal(ehdr->h_dest, pae_group_addr)))
+-		return true;
++	 * Allow EAPOL frames to us/the PAE group address regardless of
++	 * whether the frame was encrypted or not, and always disallow
++	 * all other destination addresses for them.
++	 */
++	if (unlikely(ehdr->h_proto == rx->sdata->control_port_protocol))
++		return ether_addr_equal(ehdr->h_dest, rx->sdata->vif.addr) ||
++		       ether_addr_equal(ehdr->h_dest, pae_group_addr);
+ 
+ 	if (ieee80211_802_1x_port_control(rx) ||
+ 	    ieee80211_drop_unencrypted(rx, fc))
+@@ -2632,7 +2632,26 @@ static void ieee80211_deliver_skb_to_loc
+ 		cfg80211_rx_control_port(dev, skb, noencrypt);
+ 		dev_kfree_skb(skb);
+ 	} else {
++		struct ethhdr *ehdr = (void *)skb_mac_header(skb);
+ 		memset(skb->cb, 0, sizeof(skb->cb));
++		/*
++		 * 802.1X over 802.11 requires that the authenticator address
++		 * be used for EAPOL frames. However, 802.1X allows the use of
++		 * the PAE group address instead. If the interface is part of
++		 * a bridge and we pass the frame with the PAE group address,
++		 * then the bridge will forward it to the network (even if the
++		 * client was not associated yet), which isn't supposed to
++		 * happen.
++		 * To avoid that, rewrite the destination address to our own
++		 * address, so that the authenticator (e.g. hostapd) will see
++		 * the frame, but bridge won't forward it anywhere else. Note
++		 * that due to earlier filtering, the only other address can
++		 * be the PAE group address.
++		 */
++		if (unlikely(skb->protocol == sdata->control_port_protocol &&
++			     !ether_addr_equal(ehdr->h_dest, sdata->vif.addr)))
++			ether_addr_copy(ehdr->h_dest, sdata->vif.addr);
++
+ 		netif_rx_nss(rx, skb);
+ 	}
+ }
+@@ -2672,6 +2691,7 @@ ieee80211_deliver_skb(struct ieee80211_r
+ 	if ((sdata->vif.type == NL80211_IFTYPE_AP ||
+ 	     sdata->vif.type == NL80211_IFTYPE_AP_VLAN) &&
+ 	    !(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) &&
++	    ehdr->h_proto != rx->sdata->control_port_protocol &&
+ 	    (sdata->vif.type != NL80211_IFTYPE_AP_VLAN || !sdata->u.vlan.sta)) {
+ 		if (is_multicast_ether_addr(ehdr->h_dest) &&
+ 		    ieee80211_vif_get_num_mcast_if(sdata) != 0) {
+@@ -2781,7 +2801,7 @@ __ieee80211_rx_h_amsdu(struct ieee80211_
+ 	if (ieee80211_data_to_8023_exthdr(skb, &ethhdr,
+ 					  rx->sdata->vif.addr,
+ 					  rx->sdata->vif.type,
+-					  data_offset))
++					  data_offset, true))
+ 		return RX_DROP_UNUSABLE;
+ 
+ 	ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr,
+@@ -2838,6 +2858,23 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx
+ 	if (is_multicast_ether_addr(hdr->addr1))
+ 		return RX_DROP_UNUSABLE;
+ 
++	if (rx->key) {
++		/*
++		 * We should not receive A-MSDUs on pre-HT connections,
++		 * and HT connections cannot use old ciphers. Thus drop
++		 * them, as in those cases we couldn't even have SPP
++		 * A-MSDUs or such.
++		 */
++		switch (rx->key->conf.cipher) {
++		case WLAN_CIPHER_SUITE_WEP40:
++		case WLAN_CIPHER_SUITE_WEP104:
++		case WLAN_CIPHER_SUITE_TKIP:
++			return RX_DROP_UNUSABLE;
++		default:
++			break;
++		}
++	}
++
+ 	return __ieee80211_rx_h_amsdu(rx, 0);
+ }
+ 
+Index: backports-20200902_001-4.4.60-931c337125/net/wireless/util.c
+===================================================================
+--- backports-20200902_001-4.4.60-931c337125.orig/net/wireless/util.c
++++ backports-20200902_001-4.4.60-931c337125/net/wireless/util.c
+@@ -474,7 +474,7 @@ EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen)
+ 
+ int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr,
+ 				  const u8 *addr, enum nl80211_iftype iftype,
+-				  u8 data_offset)
++				  u8 data_offset, bool is_amsdu)
+ {
+ 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ 	struct {
+@@ -562,7 +562,7 @@ int ieee80211_data_to_8023_exthdr(struct
+ 	skb_copy_bits(skb, hdrlen, &payload, sizeof(payload));
+ 	tmp.h_proto = payload.proto;
+ 
+-	if (likely((ether_addr_equal(payload.hdr, rfc1042_header) &&
++	if (likely((!is_amsdu && ether_addr_equal(payload.hdr, rfc1042_header) &&
+ 		    tmp.h_proto != htons(ETH_P_AARP) &&
+ 		    tmp.h_proto != htons(ETH_P_IPX)) ||
+ 		   ether_addr_equal(payload.hdr, bridge_tunnel_header)))
+@@ -708,6 +708,9 @@ void ieee80211_amsdu_to_8023s(struct sk_
+ 		remaining = skb->len - offset;
+ 		if (subframe_len > remaining)
+ 			goto purge;
++		/* mitigate A-MSDU aggregation injection attacks */
++		if (ether_addr_equal(eth.h_dest, rfc1042_header))
++			goto purge;
+ 
+ 		offset += sizeof(struct ethhdr);
+ 		last = remaining <= subframe_len + padding;
+Index: backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/nss.c
+===================================================================
+--- backports-20200902_001-4.4.60-931c337125.orig/drivers/net/wireless/ath/ath11k/nss.c
++++ backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/nss.c
+@@ -477,7 +477,7 @@ static int ath11k_nss_deliver_rx(struct
+ 	}
+ 
+ 	if (ieee80211_data_to_8023_exthdr(skb, NULL, vif->addr, vif->type,
+-					  data_offs - hdr_len)) {
++					  data_offs - hdr_len, false)) {
+ 		dev_kfree_skb_any(skb);
+ 		return -EINVAL;
+ 	}

feeds/wifi-ax/mac80211/patches/pending/214-debugfs-set-rate-mgmt-mcast-bcn.patch

@@ -0,0 +1,392 @@
+Index: backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/debug.c
+===================================================================
+--- backports-20200902_001-4.4.60-931c337125.orig/drivers/net/wireless/ath/ath11k/debug.c
++++ backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/debug.c
+@@ -1838,6 +1838,230 @@ static const struct file_operations fops
+ 	.open = simple_open
+ };
+ 
++static ssize_t ath11k_read_set_rates(struct file *file,
++				     char __user *user_buf,
++				     size_t count, loff_t *ppos)
++{
++	const char buf[] =
++		"This is to set fixed bcast, mcast, and beacon rates.  Normal rate-ctrl\n"
++		"is handled through normal API using 'iw', etc.\n"
++		"To set a value, you specify the dev-name, type, band and rate-code:\n"
++		"types: bcast, mcast, beacon, mgmt\n"
++		"bands: 2, 5\n"
++		"rate-codes: 1M (0x10000103), 2M (0x10000102), 5.5M (0x10000101),\n 11M (0x10000100), 6M (0x10000003),9M (0x10000007),\n 12M (0x10000002), 18M (0x10000006),\n 24M (0x10000001), 36M (0x10000005), 48M (0x10000000),\n 54M (0x10000004) , 0xFF default\n"
++		"Example, set beacon to 18Mbps on wlan0(2.4G):\n  echo \"wlan0 beacon 2 0x10000006\" > /sys/kernel/debug/ieee80211/phy0/ath11k/set_rates\n";
++
++	return simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
++}
++
++bool check_band_rate_compat(struct ath11k *ar, long rc, int band)
++{
++	struct ieee80211_supported_band *sband = NULL;
++	int br, i = 0;
++	long rcode = 0;
++
++	sband = ar->hw->wiphy->bands[band];
++	if (sband == NULL) {
++		ath11k_err(ar->ab, "band not valid\n");
++		return false;
++	}
++
++	for (i = 0; i < sband->n_bitrates; i++) {
++		br = sband->bitrates[i].bitrate;
++		rcode = ath11k_mac_get_rate_hw_value(sband->bitrates[i].bitrate);
++		if (rcode == rc){
++			return true;
++		}
++	}
++	ath11k_err(ar->ab, "rate-code not found rc=%ld(0x%lx)", rc, rc);
++	return false;
++}
++
++/* Set the rates for specific types of traffic. */
++static ssize_t ath11k_write_set_rates(struct file *file,
++				      const char __user *user_buf,
++				      size_t count, loff_t *ppos)
++{
++	struct ath11k *ar = file->private_data;
++	char buf[80];
++	int ret;
++	struct ath11k_vif *arvif;
++	struct ieee80211_vif *vif;
++	unsigned int vdev_id = 0xFFFF;
++	char* bufptr = buf;
++	long rc;
++	int cfg_band;
++	struct cfg80211_chan_def def;
++	char dev_name_match[IFNAMSIZ + 2];
++	struct wireless_dev *wdev;
++	int set_rate_type;
++
++	memset(buf, 0, sizeof(buf));
++
++	simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
++
++	/* make sure that buf is null terminated */
++	buf[sizeof(buf) - 1] = 0;
++
++	/* drop the possible '\n' from the end */
++	if (buf[count - 1] == '\n')
++		buf[count - 1] = 0;
++
++	mutex_lock(&ar->conf_mutex);
++
++	/* Ignore empty lines, 'echo' appends them sometimes at least. */
++	if (buf[0] == 0) {
++		ret = count;
++		goto exit;
++	}
++
++	/* String starts with vdev name, ie 'wlan0'  Find the proper vif that
++	 * matches the name.
++	 */
++	list_for_each_entry(arvif, &ar->arvifs, list) {
++		vif = arvif->vif;
++		wdev = ieee80211_vif_to_wdev(vif);
++
++		if (!wdev)
++			continue;
++		snprintf(dev_name_match, sizeof(dev_name_match) - 1, "%s ",
++			 wdev->netdev->name);
++		if (strncmp(dev_name_match, buf, strlen(dev_name_match)) == 0) {
++			vdev_id = arvif->vdev_id;
++			bufptr = buf + strlen(dev_name_match);
++			break;
++		}
++	}
++
++	if (vdev_id == 0xFFFF) {
++		ath11k_warn(ar->ab, "set-rate, unknown netdev name: %s\n", buf);
++		ret = -EINVAL;
++		goto exit;
++	}
++
++	/* Now, check the type. */
++	if (strncmp(bufptr, "beacon ", strlen("beacon ")) == 0) {
++		set_rate_type = WMI_VDEV_PARAM_BEACON_RATE;
++		bufptr += strlen("beacon ");
++	}
++	else if (strncmp(bufptr, "mgmt ", strlen("mgmt ")) == 0) {
++		set_rate_type = WMI_VDEV_PARAM_MGMT_RATE;
++		bufptr += strlen("mgmt ");
++	}
++	else if (strncmp(bufptr, "bcast ", strlen("bcast ")) == 0) {
++		set_rate_type = WMI_VDEV_PARAM_BCAST_DATA_RATE;
++		bufptr += strlen("bcast ");
++	}
++	else if (strncmp(bufptr, "mcast ", strlen("mcast ")) == 0) {
++		set_rate_type = WMI_VDEV_PARAM_MCAST_DATA_RATE;
++		bufptr += strlen("mcast ");
++	}
++	else {
++		ath11k_warn(ar->ab, "set-rate, invalid rate type: %s\n",
++			    bufptr);
++		ret = -EINVAL;
++		goto exit;
++	}
++
++	/* And the band */
++	if (strncmp(bufptr, "2 ", 2) == 0) {
++		cfg_band = NL80211_BAND_2GHZ;
++		bufptr += 2;
++	}
++	else if (strncmp(bufptr, "5 ", 2) == 0) {
++		cfg_band = NL80211_BAND_5GHZ;
++		bufptr += 2;
++	}
++	else if (strncmp(bufptr, "60 ", 3) == 0) {
++		cfg_band = NL80211_BAND_60GHZ;
++		bufptr += 3;
++	}
++	else {
++		ath11k_warn(ar->ab, "set-rate, invalid band: %s\n",
++			    bufptr);
++		ret = -EINVAL;
++		goto exit;
++	}
++
++	/* Parse the rate-code. */
++	ret = kstrtol(bufptr, 0, &rc);
++	if (ret != 0) {
++		ath11k_warn(ar->ab, "set-rate, invalid rate-code: %s\n",
++			    bufptr);
++		goto exit;
++	}
++
++	/* Store the value so we can re-apply it if firmware is restarted. */
++	if (set_rate_type == WMI_VDEV_PARAM_MGMT_RATE) {
++		arvif->mgt_rate[cfg_band] = rc;
++		arvif->mgt_rate_set[cfg_band] = true;
++	}
++	else if (set_rate_type == WMI_VDEV_PARAM_BCAST_DATA_RATE) {
++		arvif->bcast_rate[cfg_band] = rc;
++		arvif->bcast_rate_set[cfg_band] = true;
++	}
++	else if (set_rate_type == WMI_VDEV_PARAM_MCAST_DATA_RATE) {
++		arvif->mcast_rate[cfg_band] = rc;
++		arvif->mcast_rate_set[cfg_band] = true;
++	}
++	else if (set_rate_type == WMI_VDEV_PARAM_BEACON_RATE) {
++		arvif->bcn_rate[cfg_band] = rc;
++		arvif->bcn_rate_set[cfg_band] = true;
++	}
++
++	if (ar->state != ATH11K_STATE_ON &&
++	    ar->state != ATH11K_STATE_RESTARTED) {
++		/* OK, we will set it when vdev comes up */
++		ath11k_warn(ar->ab, "set-rates, deferred-state is down, vdev %i type: 0x%x rc: 0x%lx band: %d\n",
++			    arvif->vdev_id, set_rate_type, rc, cfg_band);
++		goto exit;
++	}
++
++	if (ath11k_mac_vif_chan(vif, &def) == 0) {
++		if (def.chan->band != cfg_band) {
++			/* We stored value, will apply it later if we move to
++			 * the different band.
++			 */
++			ath11k_warn(ar->ab, "set-rates, deferred-other-band, vdev %i type: 0x%x rc: 0x%lx band: %d\n",
++				    arvif->vdev_id, set_rate_type,
++				    rc, cfg_band);
++			goto exit;
++		}
++
++		if (check_band_rate_compat(ar, rc, def.chan->band) == false) {
++			ath11k_warn(ar->ab, "set-rate, wrong rate code\n");
++			ret = -EINVAL;
++			goto exit;
++		}
++	}
++
++	/* finally, send results to the firmware */
++	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
++					    set_rate_type, rc);
++	if (ret) {
++		ath11k_warn(ar->ab, "set-rates: vdev %i failed to set fixed rate, param 0x%x rate-code 0x%02lx\n",
++			    arvif->vdev_id, set_rate_type, rc);
++		goto exit;
++	}
++
++	ath11k_warn(ar->ab, "set-rates, vdev %i type: 0x%x rc: 0x%lx band: %d\n",
++		    arvif->vdev_id, set_rate_type, rc, cfg_band);
++
++	ret = count;
++
++exit:
++	mutex_unlock(&ar->conf_mutex);
++	return ret;
++}
++
++static const struct file_operations fops_set_rates = {
++	.read = ath11k_read_set_rates,
++	.write = ath11k_write_set_rates,
++	.open = simple_open,
++	.owner = THIS_MODULE,
++	.llseek = default_llseek,
++};
++
+ static ssize_t ath11k_write_enable_m3_dump(struct file *file,
+ 					   const char __user *ubuf,
+ 					   size_t count, loff_t *ppos)
+@@ -2532,6 +2756,9 @@ int ath11k_debug_register(struct ath11k
+ 	                    &fops__btcoex_duty_cycle);
+ 	debugfs_create_file("dump_mgmt_stats", 0644, ar->debug.debugfs_pdev,
+ 			    ar, &fops_dump_mgmt_stats);
++	debugfs_create_file("set_rates", 0600, ar->debug.debugfs_pdev,
++			    ar, &fops_set_rates);
++
+ 
+ 	if (ar->hw->wiphy->bands[NL80211_BAND_5GHZ]) {
+ 		debugfs_create_file("dfs_simulate_radar", 0200,
+Index: backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/mac.c
+===================================================================
+--- backports-20200902_001-4.4.60-931c337125.orig/drivers/net/wireless/ath/ath11k/mac.c
++++ backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/mac.c
+@@ -414,8 +414,8 @@ static u8 ath11k_parse_mpdudensity(u8 mp
+ 	}
+ }
+ 
+-static int ath11k_mac_vif_chan(struct ieee80211_vif *vif,
+-			       struct cfg80211_chan_def *def)
++int ath11k_mac_vif_chan(struct ieee80211_vif *vif,
++			struct cfg80211_chan_def *def)
+ {
+ 	struct ieee80211_chanctx_conf *conf;
+ 
+@@ -2633,7 +2633,7 @@ static void ath11k_bss_disassoc(struct i
+ 	/* TODO: cancel connection_loss_work */
+ }
+ 
+-static u32 ath11k_mac_get_rate_hw_value(int bitrate)
++u32 ath11k_mac_get_rate_hw_value(int bitrate)
+ {
+ 	u32 preamble;
+ 	u16 hw_value;
+@@ -2672,6 +2672,11 @@ static void ath11k_recalculate_mgmt_rate
+ 
+ 	lockdep_assert_held(&ar->conf_mutex);
+ 
++	/* If user has over-ridden the mgt rate, don't muck with it here. */
++	if (arvif->mgt_rate_set[def->chan->band] ||
++	    arvif->bcn_rate_set[def->chan->band])
++		return;
++
+ 	sband = ar->hw->wiphy->bands[def->chan->band];
+ 	basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1;
+ 	bitrate = sband->bitrates[basic_rate_idx].bitrate;
+@@ -2682,12 +2687,14 @@ static void ath11k_recalculate_mgmt_rate
+ 		return;
+ 	}
+ 
++	arvif->mgt_rate[def->chan->band] = hw_rate_code;
+ 	vdev_param = WMI_VDEV_PARAM_MGMT_RATE;
+ 	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, vdev_param,
+ 					    hw_rate_code);
+ 	if (ret)
+ 		ath11k_warn(ar->ab, "failed to set mgmt tx rate %d\n", ret);
+ 
++	arvif->bcn_rate[def->chan->band] = hw_rate_code;
+ 	vdev_param = WMI_VDEV_PARAM_BEACON_RATE;
+ 	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, vdev_param,
+ 					    hw_rate_code);
+@@ -3116,17 +3123,23 @@ static void ath11k_mac_op_bss_info_chang
+ 		rate = ATH11K_HW_RATE_CODE(hw_value, 0, preamble);
+ 
+ 		ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
+-			   "mac vdev %d mcast_rate %x\n",
+-			   arvif->vdev_id, rate);
+-
+-		vdev_param = WMI_VDEV_PARAM_MCAST_DATA_RATE;
+-		ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
+-						    vdev_param, rate);
+-		if (ret)
+-			ath11k_warn(ar->ab,
+-				    "failed to set mcast rate on vdev %i: %d\n",
+-				    arvif->vdev_id,  ret);
++			   "mac vdev %d mcast_rate %x  override-set-mcast: %d  override-set-bcast: %d\n",
++			   arvif->vdev_id, rate, arvif->mcast_rate_set[band],
++			   arvif->bcast_rate_set[band]);
++
++		if (!arvif->mcast_rate_set[band]) {
++			arvif->mcast_rate[band] = rate;
++			vdev_param = WMI_VDEV_PARAM_MCAST_DATA_RATE;
++			ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
++							    vdev_param, rate);
++			if (ret)
++				ath11k_warn(ar->ab,
++					    "failed to set mcast rate on vdev %i: %d\n",
++					    arvif->vdev_id,  ret);
++		}
+ 
++		if (!arvif->bcast_rate_set[band]) {
++			arvif->bcast_rate[band] = rate;
+ 		vdev_param = WMI_VDEV_PARAM_BCAST_DATA_RATE;
+ 		ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
+ 						    vdev_param, rate);
+@@ -3134,6 +3147,7 @@ static void ath11k_mac_op_bss_info_chang
+ 			ath11k_warn(ar->ab,
+ 				    "failed to set bcast rate on vdev %i: %d\n",
+ 				    arvif->vdev_id,  ret);
++		}
+ 	}
+ 
+ 	if (changed & BSS_CHANGED_BASIC_RATES &&
+@@ -5832,6 +5846,12 @@ static int ath11k_mac_op_add_interface(s
+ 
+ 	memset(arvif, 0, sizeof(*arvif));
+ 
++	memset(&arvif->bcast_rate, WMI_FIXED_RATE_NONE,
++	       sizeof(arvif->bcast_rate));
++	memset(&arvif->mcast_rate, WMI_FIXED_RATE_NONE,
++	       sizeof(arvif->mcast_rate));
++	memset(&arvif->mgt_rate, WMI_FIXED_RATE_NONE, sizeof(arvif->mgt_rate));
++
+ 	arvif->ar = ar;
+ 	arvif->vif = vif;
+ 
+Index: backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/mac.h
+===================================================================
+--- backports-20200902_001-4.4.60-931c337125.orig/drivers/net/wireless/ath/ath11k/mac.h
++++ backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/mac.h
+@@ -164,4 +164,8 @@ u8 ath11k_mac_bw_to_mac80211_bw(u8 bw);
+ enum ath11k_supported_bw ath11k_mac_mac80211_bw_to_ath11k_bw(enum rate_info_bw bw);
+ enum hal_encrypt_type ath11k_dp_tx_get_encrypt_type(u32 cipher);
+ void ath11k_mac_bcn_tx_event(struct ath11k_vif *arvif);
++int ath11k_mac_vif_chan(struct ieee80211_vif *vif,
++			struct cfg80211_chan_def *def);
++
++u32 ath11k_mac_get_rate_hw_value(int bitrate);
+ #endif
+Index: backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/core.h
+===================================================================
+--- backports-20200902_001-4.4.60-931c337125.orig/drivers/net/wireless/ath/ath11k/core.h
++++ backports-20200902_001-4.4.60-931c337125/drivers/net/wireless/ath/ath11k/core.h
+@@ -265,6 +265,23 @@ struct ath11k_vif {
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+ 	struct arvif_nss nss;
+ #endif
++	/* Firmware allows configuring rate of each of these traffic types.
++	 * 0xFF will mean value has not been set by user, and in that case,
++	 * we will auto-adjust the rates based on the legacy rate mask.
++	 **/
++	/* TODO-BEN:  This may conflict with upstream code? */
++	u8 mcast_rate[NUM_NL80211_BANDS];
++	u8 bcast_rate[NUM_NL80211_BANDS];
++	u8 mgt_rate[NUM_NL80211_BANDS];
++	u8 bcn_rate[NUM_NL80211_BANDS];
++
++	/* Flag if these rates are set through debugfs, in that case, ignore
++	 * setting from farther up the stack.
++	 */
++	bool mcast_rate_set[NUM_NL80211_BANDS];
++	bool bcast_rate_set[NUM_NL80211_BANDS];
++	bool mgt_rate_set[NUM_NL80211_BANDS];
++	bool bcn_rate_set[NUM_NL80211_BANDS];
+ };
+ 
+ struct ath11k_vif_iter {

feeds/wifi-ax/mac80211/patches/qca/225-ath11k-add_cmd_processing_time_for_scan_timeout.patch

@@ -0,0 +1,22 @@
+diff -Naur a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
+--- a/drivers/net/wireless/ath/ath11k/mac.c	2021-06-09 10:02:12.040840722 -0400
++++ b/drivers/net/wireless/ath/ath11k/mac.c	2021-06-10 10:40:12.094003411 -0400
+@@ -3472,13 +3472,14 @@
+ 		scan_timeout = min_t(u32, arg->max_rest_time *
+ 				    (arg->chan_list.num_chan - 1) + (req->duration +
+ 				     ATH11K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) *
+-				     arg->chan_list.num_chan, arg->max_scan_time +
+-				     ATH11K_MAC_SCAN_TIMEOUT_MSECS);
++				     arg->chan_list.num_chan, arg->max_scan_time);
+ 	} else {
+-		/* Add a 200ms margin to account for event/command processing */
+-		scan_timeout = arg->max_scan_time + ATH11K_MAC_SCAN_TIMEOUT_MSECS;
++		scan_timeout = arg->max_scan_time;
+ 	}
+ 
++	/* Add a 200ms margin to account for event/command processing */
++	scan_timeout += ATH11K_MAC_SCAN_TIMEOUT_MSECS;
++
+ 	ret = ath11k_start_scan(ar, arg);
+ 	if (ret) {
+ 		ath11k_warn(ar->ab, "failed to start hw scan: %d\n", ret);

feeds/wifi-trunk/ath10k-ct/Makefile

@@ -8,8 +8,8 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2020-08-26
-PKG_SOURCE_VERSION:=13319ff0b5dc3c86e8313f49fca583b829878736
+PKG_SOURCE_DATE:=2021-05-22b
+PKG_SOURCE_VERSION:=54a9ac02f1139596ea4361ebbc3e444955d86cfd
 #PKG_MIRROR_HASH:=97cf22a4a57381c7eb7a9b8a8b1e347e9711ce51c89db971b4ab9a35af476ece
 
 # Build the 5.4 ath10k-ct driver version.  Other option is "-4.19".

feeds/wifi-trunk/ath10k-ct/patches/960-0012-ath10k-add_cmd_processing_time_for_scan_timeout.patch

@@ -0,0 +1,22 @@
+diff -Naur a/ath10k-5.7/mac.c b/ath10k-5.7/mac.c
+--- a/ath10k-5.7/mac.c	2021-06-09 16:30:17.793556032 -0400
++++ b/ath10k-5.7/mac.c	2021-06-09 17:38:08.587733979 -0400
+@@ -7103,13 +7103,15 @@
+ 		scan_timeout = min_t(u32, arg.max_rest_time *
+ 				(arg.n_channels - 1) + (req->duration +
+ 				ATH10K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) *
+-				arg.n_channels, arg.max_scan_time + 200);
++				arg.n_channels, arg.max_scan_time);
+ 
+ 	} else {
+-		/* Add a 200ms margin to account for event/command processing */
+-		scan_timeout = arg.max_scan_time + 200;
++		scan_timeout = arg.max_scan_time;
+ 	}
+ 
++	/* Add a 200ms margin to account for event/command processing */
++	scan_timeout += 200;
++
+ 	ret = ath10k_start_scan(ar, &arg);
+ 	if (ret) {
+ 		ath10k_warn(ar, "failed to start hw scan: %d\n", ret);

feeds/wifi-trunk/ath10k-ct/patches/970-accumulate-survey-info-data

@@ -0,0 +1,11 @@
+--- a/ath10k-5.7/mac.c	2021-07-06 11:12:56.022146449 -0700
++++ b/ath10k-5.7/mac.c	2021-07-06 19:37:52.352753693 -0700
+@@ -8286,7 +8286,7 @@
+ 				  struct ieee80211_channel *channel)
+ {
+ 	int ret;
+-	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;
++	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ;
+ 
+ 	lockdep_assert_held(&ar->conf_mutex);
+ 

feeds/wifi-trunk/ath10k-ct/patches/970-add-survey-local-bss-receive-time

@@ -0,0 +1,31 @@
+--- a/ath10k-5.7/wmi.c
++++ b/ath10k-5.7/wmi.c
+@@ -6347,16 +6347,18 @@
+ 
+ 	survey = &ar->survey[idx];
+ 
+-	survey->noise     = noise_floor;
+-	survey->time      = div_u64(total, cc_freq_hz);
+-	survey->time_busy = div_u64(busy, cc_freq_hz);
+-	survey->time_rx   = div_u64(rx_bss, cc_freq_hz);
+-	survey->time_tx   = div_u64(tx, cc_freq_hz);
+-	survey->filled   |= (SURVEY_INFO_NOISE_DBM |
+-			     SURVEY_INFO_TIME |
+-			     SURVEY_INFO_TIME_BUSY |
+-			     SURVEY_INFO_TIME_RX |
+-			     SURVEY_INFO_TIME_TX);
++	survey->noise       = noise_floor;
++	survey->time        = div_u64(total, cc_freq_hz);
++	survey->time_busy   = div_u64(busy, cc_freq_hz);
++	survey->time_rx     = div_u64(rx, cc_freq_hz);
++	survey->time_bss_rx = div_u64(rx_bss, cc_freq_hz);
++	survey->time_tx     = div_u64(tx, cc_freq_hz);
++	survey->filled     |= (SURVEY_INFO_NOISE_DBM |
++			       SURVEY_INFO_TIME |
++			       SURVEY_INFO_TIME_BUSY |
++			       SURVEY_INFO_TIME_RX |
++			       SURVEY_INFO_TIME_TX |
++			       SURVEY_INFO_TIME_BSS_RX);
+ exit:
+ 	spin_unlock_bh(&ar->data_lock);
+ 	complete(&ar->bss_survey_done);

feeds/wifi-trunk/hostapd/files/hostapd.sh

@@ -47,8 +47,18 @@ hostapd_append_wpa_key_mgmt() {
 			[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
 			[ "${ieee80211ai:-0}" -gt 0 ] && append wpa_key_mgmt "FILS-SHA256"
 		;;
+		eap-only)
+			append wpa_key_mgmt "WPA-EAP-SHA256"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
+		;;
+		eap-transition)
+			append wpa_key_mgmt "WPA-EAP"
+			append wpa_key_mgmt "WPA-EAP-SHA256"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
+		;;
 		eap192)
 			append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
+			[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-EAP-SHA256"
 			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
 		;;
 		eap-eap192)
@@ -294,15 +304,17 @@ hostapd_common_add_bss_config() {
 	config_add_string osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
 
 	config_add_boolean interworking internet
-	config_add_int access_network_type asra esr uesa venue_group venue_type ipaddr_type_availability \
+	config_add_int access_network_type asra esr uesa venue_group venue_type \
 		gas_address3
-	config_add_string hessid network_auth_type \
+	config_add_string hessid network_auth_type ipaddr_type_availability \
 		anqp_3gpp_cell_net anqp_elem domain_name qos_map_set hs20_t_c_server_url
 
 	config_add_int airtime_bss_weight airtime_bss_limit
 	config_add_int rts_threshold
 	config_add_array radius_auth_req_attr
 	config_add_array radius_acct_req_attr
+
+	config_add_boolean multicast_to_unicast proxy_arp
 }
 
 hostapd_set_vlan_file() {
@@ -446,7 +458,8 @@ hostapd_set_bss_options() {
 		bss_load_update_period chan_util_avg_period sae_require_mfp \
 		multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key \
 		airtime_bss_weight airtime_bss_limit \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request rts_threshold 
+		rssi_reject_assoc_rssi rssi_ignore_probe_request rts_threshold \
+		proxy_arp multicast_to_unicast
 
 	set_default isolate 0
 	set_default maxassoc 0
@@ -474,6 +487,9 @@ hostapd_set_bss_options() {
 	set_default signal_poll_time 5
 	set_default signal_drop_reason 3
 	set_default signal_strikes 3
+	set_default proxy_arp 0
+	set_default multicast_to_unicast 0
+
 
 	append bss_conf "ctrl_interface=/var/run/hostapd"
 	if [ "$isolate" -gt 0 ]; then
@@ -507,6 +523,9 @@ hostapd_set_bss_options() {
 	append bss_conf "signal_strikes=$signal_strikes" "$N"
 	append bss_conf "signal_drop_reason=$signal_drop_reason" "$N"
 
+	[ -n "$proxy_arp" ] && append bss_conf "proxy_arp=$proxy_arp" "$N"
+	[ -n "$multicast_to_unicast" ] && append bss_conf "multicast_to_unicast=$multicast_to_unicast" "$N"
+
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
 
 	[ "$wpa" -gt 0 ] && {
@@ -529,11 +548,11 @@ hostapd_set_bss_options() {
 	}
 
 	case "$auth_type" in
-		sae|owe|eap192|eap-eap192)
+		sae|owe|eap192|eap-eap192|eap-only)
 			set_default ieee80211w 2
 			set_default sae_require_mfp 1
 		;;
-		psk-sae)
+		psk-sae|eap-transition)
 			set_default ieee80211w 1
 			set_default sae_require_mfp 1
 		;;
@@ -575,7 +594,7 @@ hostapd_set_bss_options() {
 			vlan_possible=1
 			wps_possible=1
 		;;
-		eap|eap192|eap-eap192)
+		eap|eap192|eap-eap192|eap-only|eap-transition)
 			json_get_vars \
 				auth_server auth_secret auth_port \
 				dae_client dae_secret dae_port \
@@ -791,7 +810,15 @@ hostapd_set_bss_options() {
 				json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout
 				append bss_conf "ieee80211w=$ieee80211w" "$N"
 				[ "$ieee80211w" -gt "0" ] && {
-					append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
+					case "$auth_type" in
+						eap192)
+							append bss_conf "group_mgmt_cipher=BIP-GMAC-256" "$N"
+							append bss_conf "group_cipher=GCMP-256" "$N"
+						;;
+						*)
+							append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
+						;;
+					esac
 					[ -n "$ieee80211w_max_timeout" ] && \
 						append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
 					[ -n "$ieee80211w_retry_timeout" ] && \
@@ -871,16 +898,15 @@ hostapd_set_bss_options() {
 	set_default access_network_type 0
 	set_default venue_group 0
 	set_default venue_type 0
-	set_default ipaddr_type_availability 0
 	set_default gas_address3 0
 	set_default hs20_deauth_req_timeout 60
 	if [ "$hs20" = "1" ]; then
 		append bss_conf "hs20=1" "$N"
 		append_hs20_icons
-		[ -n "$disable_dgaf"] && append bss_conf "disable_dgaf=$disable_dgaf" "$N"
-		[ -n "$osen"] && append bss_conf "osen=$osen" "$N"
+		[ -n "$disable_dgaf" ] && append bss_conf "disable_dgaf=$disable_dgaf" "$N"
+		[ -n "$osen" ] && append bss_conf "osen=$osen" "$N"
 		[ "$anqp_domain_id" -gt 0 ] && append bss_conf "anqp_domain_id=$anqp_domain_id" "$N"
-		[ -n "$hs20_deauth_req_timeout"] && append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N"
+		[ -n "$hs20_deauth_req_timeout" ] && append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N"
 		[ -n "$osu_ssid" ] && append bss_conf "osu_ssid=$osu_ssid" "$N"
 		[ -n "$hs20_wan_metrics" ] && append bss_conf "hs20_wan_metrics=$hs20_wan_metrics" "$N"
 		[ -n "$hs20_operating_class" ] && append bss_conf "hs20_operating_class=$hs20_operating_class" "$N"
@@ -892,7 +918,6 @@ hostapd_set_bss_options() {
 		json_for_each_item append_venue_url venue_url
 		json_for_each_item append_nai_realm nai_realm
 		json_for_each_item append_hs20_conn_capab hs20_conn_capab
-		json_for_each_item append_hs20_oper_friendly_name hs20_oper_friendly_name
 		json_for_each_item append_osu_provider osu_provider
 		json_for_each_item append_operator_icon operator_icon
 		[ -n "$interworking" ] && append bss_conf "interworking=$interworking" "$N"
@@ -903,7 +928,7 @@ hostapd_set_bss_options() {
 		[ "$uesa" -gt 0 ] && append bss_conf "uesa=$uesa" "$N"
 		[ "$venue_group" -gt 0 ] && append bss_conf "venue_group=$venue_group" "$N"
 		[ "$venue_type" -gt 0 ] && append bss_conf "venue_type=$venue_type" "$N"
-		[ "$ipaddr_type_availability" -gt 0 ] && append bss_conf "ipaddr_type_availability=$ipaddr_type_availability" "$N"
+		[ -n "$ipaddr_type_availability" ] && append bss_conf "ipaddr_type_availability=$ipaddr_type_availability" "$N"
 		[ "$gas_address3" -gt 0 ] && append bss_conf "gas_address3=$gas_address3" "$N"
 		[ -n "$hessid" ] && append bss_conf "hessid=$hessid" "$N"
 		[ -n "$network_auth_type" ] && append bss_conf "network_auth_type=$network_auth_type" "$N"

feeds/wifi-trunk/hostapd/patches/901-hapd-ubus-channel-switch.patch

@@ -1,7 +1,5 @@
-Index: hostapd-2020-06-08-5a8b3662/src/ap/dfs.c
-===================================================================
---- hostapd-2020-06-08-5a8b3662.orig/src/ap/dfs.c
-+++ hostapd-2020-06-08-5a8b3662/src/ap/dfs.c
+--- a/src/ap/dfs.c
++++ b/src/ap/dfs.c
 @@ -18,7 +18,7 @@
  #include "drivers/driver.h"
  #include "dfs.h"
@@ -23,10 +21,8 @@ Index: hostapd-2020-06-08-5a8b3662/src/ap/dfs.c
  	if (err) {
  		wpa_printf(MSG_WARNING, "DFS failed to schedule CSA (%d) - trying fallback",
  			   err);
-Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
-===================================================================
---- hostapd-2020-06-08-5a8b3662.orig/src/ap/ubus.c
-+++ hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
+--- a/src/ap/ubus.c
++++ b/src/ap/ubus.c
 @@ -29,6 +29,8 @@ static int ctx_ref;
  static char** bss_lst = NULL;
  static size_t bss_nr = 0;
@@ -36,7 +32,7 @@ Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
  static inline struct hapd_interfaces *get_hapd_interfaces_from_object(struct ubus_object *obj)
  {
  	return container_of(obj, struct hapd_interfaces, ubus);
-@@ -714,6 +716,43 @@ static int hostapd_sessions(struct ubus_
+@@ -714,6 +716,44 @@ static int hostapd_sessions(struct ubus_
  	return 0;
  }
  
@@ -48,7 +44,7 @@ Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
 +{
 +	void *a = NULL;
 +	void *t = NULL;
-+	struct hostapd_chan_event_list *entry;
++	struct hostapd_chan_event_list *entry, *tmp;
 +
 +	blob_buf_init(&b_ev, 0);
 +	a = blobmsg_open_table(&b_ev, "chan_switch_event");
@@ -68,9 +64,10 @@ Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
 +	/*delete list*/
 +
 +	if (!list_empty(&chan_events)) {
-+	list_for_each_entry(entry, &chan_events, list)
++	list_for_each_entry_safe(entry, tmp, &chan_events, list)
 +		{
 +			list_del(&entry->list);
++			free(entry);
 +		}
 +	}
 +
@@ -80,7 +77,7 @@ Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
  static int
  hostapd_switch_chan(struct ubus_context *ctx, struct ubus_object *obj,
  		    struct ubus_request_data *req, const char *method,
-@@ -749,6 +788,9 @@ hostapd_switch_chan(struct ubus_context
+@@ -749,6 +789,9 @@ hostapd_switch_chan(struct ubus_context
  
  	if (hostapd_switch_channel(hapd, &css) != 0)
  		return UBUS_STATUS_NOT_SUPPORTED;
@@ -90,7 +87,7 @@ Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
  	return UBUS_STATUS_OK;
  #undef SET_CSA_SETTING
  }
-@@ -1444,6 +1486,7 @@ static const struct ubus_method daemon_m
+@@ -1444,6 +1487,7 @@ static const struct ubus_method daemon_m
  	UBUS_METHOD("config_add", hostapd_config_add, config_add_policy),
  	UBUS_METHOD("config_remove", hostapd_config_remove, config_remove_policy),
  	UBUS_METHOD_NOARG("get_bss_list", hostapd_get_bss_list),
@@ -98,7 +95,7 @@ Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
  };
  
  static struct ubus_object_type daemon_object_type =
-@@ -1507,6 +1550,28 @@ ubus_event_cb(struct ubus_notify_request
+@@ -1507,6 +1551,28 @@ ubus_event_cb(struct ubus_notify_request
  	ureq->resp = ret;
  }
  
@@ -127,10 +124,8 @@ Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
  int hostapd_ubus_handle_rt_event(struct hostapd_data *hapd,
  				 struct hostapd_ubus_request *req)
  {
-Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.h
-===================================================================
---- hostapd-2020-06-08-5a8b3662.orig/src/ap/ubus.h
-+++ hostapd-2020-06-08-5a8b3662/src/ap/ubus.h
+--- a/src/ap/ubus.h
++++ b/src/ap/ubus.h
 @@ -17,9 +17,15 @@ enum hostapd_ubus_event_type {
  	HOSTAPD_UBUS_DEAUTH_REQ,
  	HOSTAPD_UBUS_FDATA_REQ,

feeds/wifi-trunk/hostapd/patches/902-ubus-multi-bss-chan-switch.patch

@@ -0,0 +1,23 @@
+--- a/src/ap/ubus.c
++++ b/src/ap/ubus.c
+@@ -762,6 +762,7 @@ hostapd_switch_chan(struct ubus_context
+ 	struct blob_attr *tb[__CSA_MAX];
+ 	struct hostapd_data *hapd = get_hapd_from_object(obj);
+ 	struct csa_settings css;
++	int i;
+ 
+ 	blobmsg_parse(csa_policy, __CSA_MAX, tb, blob_data(msg), blob_len(msg));
+ 
+@@ -787,8 +788,10 @@ hostapd_switch_chan(struct ubus_context
+ 	SET_CSA_SETTING(CSA_BLOCK_TX, block_tx, bool);
+ 
+ 
+-	if (hostapd_switch_channel(hapd, &css) != 0)
+-		return UBUS_STATUS_NOT_SUPPORTED;
++	for (i = 0; i < hapd->iface->num_bss; i++) {
++		if (hostapd_switch_channel(hapd->iface->bss[i], &css) != 0)
++			return UBUS_STATUS_NOT_SUPPORTED;
++	}
+ 
+ 	hostapd_ubus_handle_channel_switch_event(hapd->iface,HOSTAPD_UBUS_HIGH_INTERFERENCE,  css.freq_params.freq);
+ 

feeds/wifi-trunk/hostapd/patches/903-hapd-del_sta_before_add_if_sta_already_exist.patch

@@ -0,0 +1,28 @@
+Index: hostapd-2020-06-08-5a8b3662/src/ap/ieee802_11.c
+===================================================================
+--- hostapd-2020-06-08-5a8b3662.orig/src/ap/ieee802_11.c
++++ hostapd-2020-06-08-5a8b3662/src/ap/ieee802_11.c
+@@ -3675,6 +3675,13 @@ static int add_associated_sta(struct hos
+ 	 * drivers to accept the STA parameter configuration. Since this is
+ 	 * after a new FT-over-DS exchange, a new TK has been derived, so key
+ 	 * reinstallation is not a concern for this case.
++	 *
++	 * If the STA was associated and authorized earlier, but came for a new
++	 * connection (!added_unassoc + !reassoc), remove the existing STA entry
++	 * so that it can be re-added. This case is rarely seen when the AP could
++	 * not receive the deauth/disassoc frame from the STA. And the STA comes
++	 * back with new connection within a short period or before the inactive
++	 * STA entry is removed from the list.
+ 	 */
+ 	wpa_printf(MSG_DEBUG, "Add associated STA " MACSTR
+ 		   " (added_unassoc=%d auth_alg=%u ft_over_ds=%u reassoc=%d authorized=%d ft_tk=%d fils_tk=%d)",
+@@ -3688,7 +3695,8 @@ static int add_associated_sta(struct hos
+ 	    (!(sta->flags & WLAN_STA_AUTHORIZED) ||
+ 	     (reassoc && sta->ft_over_ds && sta->auth_alg == WLAN_AUTH_FT) ||
+ 	     (!wpa_auth_sta_ft_tk_already_set(sta->wpa_sm) &&
+-	      !wpa_auth_sta_fils_tk_already_set(sta->wpa_sm)))) {
++	      !wpa_auth_sta_fils_tk_already_set(sta->wpa_sm)) ||
++	     (!reassoc && (sta->flags & WLAN_STA_AUTHORIZED)))) {
+ 		hostapd_drv_sta_remove(hapd, sta->addr);
+ 		wpa_auth_sm_event(sta->wpa_sm, WPA_DRV_STA_REMOVED);
+ 		set = 0;

feeds/wifi-trunk/hostapd/patches/904-fix-ubus-assoc.patch

@@ -0,0 +1,32 @@
+--- a/src/ap/ieee802_11.c
++++ b/src/ap/ieee802_11.c
+@@ -4463,6 +4463,14 @@ static void handle_assoc(struct hostapd_
+ 			ieee802_11_set_beacons(hapd->iface);
+ 	}
+ 
++	ubus_resp = hostapd_ubus_handle_event(hapd, &req);
++	if (ubus_resp) {
++		wpa_printf(MSG_DEBUG, "Station " MACSTR " assoc rejected by ubus handler.\n",
++		       MAC2STR(mgmt->sa));
++		resp = ubus_resp > 0 ? (u16) ubus_resp : WLAN_STATUS_UNSPECIFIED_FAILURE;
++		goto fail;
++	}
++
+ 	update_ht_state(hapd, sta);
+ 
+ 	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
+@@ -4568,14 +4576,6 @@ static void handle_assoc(struct hostapd_
+ 					    pos, left, rssi, omit_rsnxe);
+ 	os_free(tmp);
+ 
+-	ubus_resp = hostapd_ubus_handle_event(hapd, &req);
+-	if (ubus_resp) {
+-		wpa_printf(MSG_DEBUG, "Station " MACSTR " assoc rejected by ubus handler.\n",
+-		       MAC2STR(mgmt->sa));
+-		resp = ubus_resp > 0 ? (u16) ubus_resp : WLAN_STATUS_UNSPECIFIED_FAILURE;
+-		goto fail;
+-	}
+-
+ 	/*
+ 	 * Remove the station in case tranmission of a success response fails
+ 	 * (the STA was added associated to the driver) or if the station was

feeds/wifi-trunk/hostapd/patches/905-ubus-change-conf-param.patch

@@ -0,0 +1,65 @@
+Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
+===================================================================
+--- hostapd-2020-06-08-5a8b3662.orig/src/ap/ubus.c
++++ hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
+@@ -1486,7 +1486,60 @@ static int hostapd_get_bss_list(struct u
+ 	return 0;
+ }
+ 
++enum {
++	MOD_IFACE,
++	MOD_PARAM,
++	MOD_PARAM_VAL,
++	__PARAM_MAX
++};
++
++static const struct blobmsg_policy mod_param_policy[__PARAM_MAX] = {
++	[MOD_IFACE] = { "iface", BLOBMSG_TYPE_STRING },
++	[MOD_PARAM] = { "param", BLOBMSG_TYPE_STRING },
++	[MOD_PARAM_VAL] = { "param_val", BLOBMSG_TYPE_STRING },
++};
++
++static int
++hostapd_param_modify(struct ubus_context *ctx, struct ubus_object *obj,
++		   struct ubus_request_data *req, const char *method,
++		   struct blob_attr *msg)
++{
++	struct blob_attr *tb[__PARAM_MAX];
++	struct hapd_interfaces *interfaces = NULL;
++	struct hostapd_data *hapd_bss = NULL;
++	struct hostapd_config *iconf = NULL;
++	struct hostapd_iface *iface = NULL;
++	size_t i = 0;
++
++	interfaces = get_hapd_interfaces_from_object(obj);
++	blobmsg_parse(mod_param_policy, __PARAM_MAX, tb, blob_data(msg),
++		      blob_len(msg));
++	if (!tb[MOD_PARAM] || !tb[MOD_IFACE] || !tb[MOD_PARAM_VAL])
++		return UBUS_STATUS_INVALID_ARGUMENT;
++
++	wpa_printf(MSG_DEBUG, "Modifyint %s=%s for %s",
++		blobmsg_get_string(tb[MOD_PARAM]),
++		blobmsg_get_string(tb[MOD_PARAM_VAL]),
++		blobmsg_get_string(tb[MOD_IFACE]));
++	
++	hapd_bss = hostapd_get_iface(interfaces,
++				     blobmsg_get_string(tb[MOD_IFACE]));
++
++	if (hapd_bss) {
++		iconf = hapd_bss->iconf;
++		if (os_strcmp(blobmsg_get_string(tb[MOD_PARAM]),
++			      "rssi_ignore_probe_request") == 0) {
++			iconf->rssi_ignore_probe_request = atoi(blobmsg_get_string(tb[MOD_PARAM_VAL]));
++
++		}
++	}
++
++	return UBUS_STATUS_OK;
++}
++
++
+ static const struct ubus_method daemon_methods[] = {
++	UBUS_METHOD("param_mod", hostapd_param_modify, mod_param_policy),
+ 	UBUS_METHOD("config_add", hostapd_config_add, config_add_policy),
+ 	UBUS_METHOD("config_remove", hostapd_config_remove, config_remove_policy),
+ 	UBUS_METHOD_NOARG("get_bss_list", hostapd_get_bss_list),

feeds/wifi-trunk/hostapd/patches/906-hapd-create_new_session_if_id_is_0.patch

@@ -0,0 +1,14 @@
+Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
+===================================================================
+--- hostapd-2020-06-08-5a8b3662.orig/src/ap/ubus.c
++++ hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
+@@ -1657,7 +1657,8 @@ int hostapd_ubus_handle_rt_event(struct
+ 	session_id = sta->cl_session_id;
+ 
+ 	/* find by session id */
+-	rec = avl_find_element(&hapd->ubus.rt_events, &session_id, rec, avl);
++	if (session_id)
++		rec = avl_find_element(&hapd->ubus.rt_events, &session_id, rec, avl);
+ 
+ 	/* prepare rec if not found */
+ 	if (!rec) {

feeds/wifi-trunk/hostapd/patches/907-ubus-add-dfs-chan-switch.patch

@@ -0,0 +1,299 @@
+Index: hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
+===================================================================
+--- hostapd-2020-06-08-5a8b3662.orig/src/ap/ubus.c
++++ hostapd-2020-06-08-5a8b3662/src/ap/ubus.c
+@@ -21,6 +21,7 @@
+ #include "rrm.h"
+ #include "wnm_ap.h"
+ #include "taxonomy.h"
++#include "common/hw_features_common.h"
+ 
+ static struct ubus_context *ctx;
+ static struct blob_buf b;
+@@ -754,6 +755,208 @@ static int hostapd_get_chan_switch_event
+ 	return 0;
+ }
+ 
++#define HOSTAPD_DFS_CSA_DUR 1
++int csa_ch_id, csa_cf0_id, csa_cf1_id = 0;
++int csa_bw = CHANWIDTH_USE_HT;
++struct csa_settings css;
++
++struct hostapd_channel_data *freq_to_chan(struct hostapd_iface *iface, int freq)
++{
++	struct hostapd_hw_modes *mode;
++	struct hostapd_channel_data *chan;
++	int i;
++
++	mode = iface->current_mode;
++	if (mode == NULL || freq == 0) {
++		wpa_printf(MSG_INFO, "%s: mode is NULL", __func__);
++		return NULL;
++	}
++
++	for (i = 0; i < iface->current_mode->num_channels; i++) {
++		chan = &iface->current_mode->channels[i];
++		if (chan->freq == freq) {
++			return chan; /* Channel found */
++		}
++	}
++	return NULL;
++}
++
++void hostapd_dfs_csa_timeout(void *eloop_data, void *user_data)
++{
++	struct hostapd_data *hapd = eloop_data;
++	struct hostapd_iface *iface = hapd->iface;
++	struct csa_settings *css = user_data;
++	int ret = 0;
++
++	wpa_printf(MSG_DEBUG, "%s Stopping CSA in dfs ", __func__);
++
++	hapd->csa_in_progress = 0;
++
++	hostapd_disable_iface(iface);
++
++	iface->freq = css->freq_params.freq;
++	iface->conf->channel = csa_ch_id;
++	iface->conf->secondary_channel = css->freq_params.sec_channel_offset;
++	hostapd_set_oper_centr_freq_seg0_idx(iface->conf, csa_cf0_id);
++	hostapd_set_oper_centr_freq_seg1_idx(iface->conf, csa_cf1_id);
++	hostapd_set_oper_chwidth(iface->conf, csa_bw);
++	iface->conf->ieee80211n = css->freq_params.ht_enabled;
++	iface->conf->ieee80211ac = css->freq_params.vht_enabled;
++	iface->conf->ieee80211ax = css->freq_params.he_enabled;
++	wpa_printf(MSG_INFO, "%s: freq=%d chan=%d sec_ch=%d cf0=%d cf1=%d bw=%d 11n=%d, ac=%d, ax=%d",
++ 		   __func__, iface->freq, iface->conf->channel,
++		   iface->conf->secondary_channel, csa_cf0_id, csa_cf1_id, 
++		   css->freq_params.bandwidth, iface->conf->ieee80211n,
++		   iface->conf->ieee80211ac, iface->conf->ieee80211ax);
++
++	ret = hostapd_enable_iface(iface);
++	if (ret == 0)
++		hostapd_ubus_handle_channel_switch_event(iface,
++						HOSTAPD_UBUS_HIGH_INTERFERENCE,
++						iface->freq);
++ 
++}
++
++int hostapd_dfs_set_beacon_csa(struct hostapd_iface *iface, struct csa_settings *css)
++{
++	struct hostapd_data *hapd = iface->bss[0];
++	struct hostapd_data *hapd_bss = NULL;
++	struct csa_settings csa_settings;
++	int secondary_channel = 0;
++	u8 vht_oper_centr_freq_seg0_idx;
++	u8 vht_oper_centr_freq_seg1_idx;
++	int err = 0, i = 0;
++
++	if (hapd->csa_in_progress == 1) {
++		wpa_printf(MSG_ERROR, "CSA in progress, cannot switch channel");
++		return -1;
++	}
++
++	eloop_cancel_timeout(hostapd_dfs_csa_timeout, hapd, NULL);
++
++	/* Setup Beacon CSA request */
++	secondary_channel = iface->conf->secondary_channel;
++	vht_oper_centr_freq_seg0_idx =
++			iface->conf->vht_oper_centr_freq_seg0_idx;
++	vht_oper_centr_freq_seg1_idx =
++			iface->conf->vht_oper_centr_freq_seg1_idx;
++
++	os_memset(&csa_settings, 0, sizeof(csa_settings));
++	err = hostapd_set_freq_params(&csa_settings.freq_params,
++				      iface->conf->hw_mode,
++				      iface->freq,
++				      iface->conf->channel,
++				      iface->conf->enable_edmg,
++				      iface->conf->edmg_channel,
++				      iface->conf->ieee80211n,
++				      iface->conf->ieee80211ac,
++				      iface->conf->ieee80211ax,
++				      secondary_channel,
++				      hostapd_get_oper_chwidth(iface->conf),
++				      vht_oper_centr_freq_seg0_idx,
++				      vht_oper_centr_freq_seg1_idx,
++				      iface->current_mode->vht_capab,
++				      &iface->current_mode->he_capab[IEEE80211_MODE_AP]);
++	if (err) {
++		wpa_printf(MSG_ERROR, "DFS failed to calculate CSA freq params");
++		return -1;
++	}
++
++
++	if (!(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_AP_CSA)) {
++		wpa_printf(MSG_ERROR, "CSA is not supported");
++		return -1;
++	}
++
++	/* Set Beacon */
++	for (i = 0; i < hapd->iface->num_bss; i++) {
++		hapd_bss = iface->bss[i];
++		hapd_bss->cs_freq_params = csa_settings.freq_params;
++		hapd_bss->cs_count = css->cs_count;
++		hapd_bss->cs_block_tx = css->block_tx;
++		err = ieee802_11_set_beacon(hapd_bss);
++		if (err)
++			wpa_printf(MSG_ERROR, "CSA beacon set failed, changing channel without an Announcement");
++	}
++
++	hapd->csa_in_progress = 1;
++
++	/* Switch Channel after a timeout */
++	eloop_register_timeout(HOSTAPD_DFS_CSA_DUR, 0,
++			       hostapd_dfs_csa_timeout, hapd, css);
++
++	return 0;
++}
++
++int hostapd_switch_chan_dfs(struct hostapd_iface *iface,
++			     struct csa_settings *css)
++{
++	struct hostapd_channel_data *ch, *cf1, *cf2 = NULL;
++	int res = 0;
++
++	if (iface == NULL)
++		return -1;
++
++	/* Set channel id and center frequecies id */
++	if (css->freq_params.freq > 0) {
++		ch = freq_to_chan(iface, css->freq_params.freq);
++		csa_ch_id = ch->chan;
++	}
++
++	if (css->freq_params.center_freq1 > 0) {
++		csa_cf0_id = 36 + (css->freq_params.center_freq1 - 5180) / 5;
++	}
++
++	if (css->freq_params.center_freq2 > 0) {
++		csa_cf1_id = 36 + (css->freq_params.center_freq2 - 5180) / 5;
++	}
++
++	wpa_printf(MSG_DEBUG, "%s freq=%d chan=%d sec_chan=%d, width=%d, seg0=%d, seg1=%d, cac_time=%ds, ieee80211n=%d, ieee80211ac=%d, ieee80211ax=%d ", __func__,
++		css->freq_params.freq,
++		csa_ch_id, css->freq_params.sec_channel_offset,
++		css->freq_params.bandwidth, csa_cf0_id, csa_cf1_id,
++		iface->dfs_cac_ms / 1000, iface->conf->ieee80211n,
++		iface->conf->ieee80211ac, iface->conf->ieee80211ax);
++
++	/* Set bandwidth */
++	switch (css->freq_params.bandwidth) {
++	case 0:
++	case 20:
++	case 40:
++		csa_bw = CHANWIDTH_USE_HT;
++		break;
++	case 80:
++		if (css->freq_params.center_freq2)
++			csa_bw = CHANWIDTH_80P80MHZ;
++		else
++			csa_bw = CHANWIDTH_80MHZ;
++		break;
++	case 160:
++		csa_bw = CHANWIDTH_160MHZ;
++		break;
++	default:
++		wpa_printf(MSG_WARNING, "Unknown CSA bandwidth: %d",
++			   css->freq_params.bandwidth);
++		break;
++	}
++
++	/* Set new frequency info */
++	iface->freq = css->freq_params.freq;
++	iface->conf->channel = csa_ch_id;
++	iface->conf->secondary_channel = css->freq_params.sec_channel_offset;
++	hostapd_set_oper_centr_freq_seg0_idx(iface->conf, csa_cf0_id);
++	hostapd_set_oper_centr_freq_seg1_idx(iface->conf, csa_cf1_id);
++	hostapd_set_oper_chwidth(iface->conf, csa_bw);
++	iface->conf->ieee80211n = css->freq_params.ht_enabled;
++	iface->conf->ieee80211ac = css->freq_params.vht_enabled;
++	iface->conf->ieee80211ax = css->freq_params.he_enabled;
++
++	/*Set beacon for CSA*/
++	hostapd_dfs_set_beacon_csa(iface, css);
++
++	return 0;
++}
++
+ static int
+ hostapd_switch_chan(struct ubus_context *ctx, struct ubus_object *obj,
+ 		    struct ubus_request_data *req, const char *method,
+@@ -761,14 +964,19 @@ hostapd_switch_chan(struct ubus_context
+ {
+ 	struct blob_attr *tb[__CSA_MAX];
+ 	struct hostapd_data *hapd = get_hapd_from_object(obj);
+-	struct csa_settings css;
++	struct hostapd_iface *iface = hapd->iface;
++	struct hostapd_channel_data *chan =NULL;
+ 	int i;
++	int freq = 0;
+ 
+ 	blobmsg_parse(csa_policy, __CSA_MAX, tb, blob_data(msg), blob_len(msg));
+ 
+ 	if (!tb[CSA_FREQ])
+ 		return UBUS_STATUS_INVALID_ARGUMENT;
+ 
++	freq = blobmsg_get_u32(tb[CSA_FREQ]);
++	chan = freq_to_chan(iface, freq);
++
+ 	memset(&css, 0, sizeof(css));
+ 	css.freq_params.freq = blobmsg_get_u32(tb[CSA_FREQ]);
+ 
+@@ -787,6 +995,20 @@ hostapd_switch_chan(struct ubus_context
+ 	SET_CSA_SETTING(CSA_VHT, freq_params.vht_enabled, bool);
+ 	SET_CSA_SETTING(CSA_BLOCK_TX, block_tx, bool);
+ 
++	wpa_printf(MSG_INFO, "%s: CSS freq=%d chan=%d sec_chan_off=%d, width=%d, seg0=%d, seg1=%d", __func__,
++		css.freq_params.freq,
++		chan->chan, css.freq_params.sec_channel_offset,
++		css.freq_params.bandwidth,
++		css.freq_params.center_freq1,
++		css.freq_params.center_freq2);
++
++	if ((chan->flag & HOSTAPD_CHAN_RADAR) &&
++	    ((chan->flag & HOSTAPD_CHAN_DFS_MASK)
++	     != HOSTAPD_CHAN_DFS_AVAILABLE)) {
++		wpa_printf(MSG_INFO, "%s: DFS chan need CAC", __func__);
++		hostapd_switch_chan_dfs(iface, &css);
++		return UBUS_STATUS_OK;
++	}
+ 
+ 	for (i = 0; i < hapd->iface->num_bss; i++) {
+ 		if (hostapd_switch_channel(hapd->iface->bss[i], &css) != 0)
+@@ -1454,10 +1676,16 @@ void hostapd_ubus_free_bss(struct hostap
+ 	}
+ 
+ 	free(name);
+-	for (size_t i = 0; i < bss_nr; i++)
+-		os_free(bss_lst[i]);
+-	free(bss_lst);
+-	bss_lst = NULL;
++
++	if (bss_lst != NULL) {
++		for (size_t i = 0; i < bss_nr; i++) {
++			os_free(bss_lst[i]);
++			bss_lst[i] = NULL;
++		}
++		free(bss_lst);
++		bss_lst = NULL;
++		bss_nr = 0;
++	}
+ }
+ 
+ static int hostapd_get_bss_list(struct ubus_context *ctx,
+@@ -1477,9 +1705,11 @@ static int hostapd_get_bss_list(struct u
+ 	a = blobmsg_open_array(&b_ev, "bss_list");
+ 	/* check bss list from hapd */
+ 	for (size_t i = 0; i < bss_nr; i++) {
+-		b = blobmsg_open_table(&b_ev, NULL);
+-		blobmsg_add_string(&b_ev, "name", bss_lst[i]);
+-		blobmsg_close_table(&b_ev, b);
++		if (bss_lst[i] != NULL) {
++			b = blobmsg_open_table(&b_ev, NULL);
++			blobmsg_add_string(&b_ev, "name", bss_lst[i]);
++			blobmsg_close_table(&b_ev, b);
++		}
+ 	}
+ 	blobmsg_close_array(&b_ev, a);
+ 	ubus_send_reply(ctx, req, b_ev.head);

feeds/wifi-trunk/hostapd/patches/908-channel-switch-event.patch

@@ -0,0 +1,64 @@
+--- a/src/ap/ubus.c
++++ b/src/ap/ubus.c
+@@ -530,6 +530,7 @@ enum {
+ 	CSA_HT,
+ 	CSA_VHT,
+ 	CSA_BLOCK_TX,
++	CSA_REASON,
+ 	__CSA_MAX
+ };
+ 
+@@ -543,6 +544,7 @@ static const struct blobmsg_policy csa_p
+ 	[CSA_HT] = { "ht", BLOBMSG_TYPE_BOOL },
+ 	[CSA_VHT] = { "vht", BLOBMSG_TYPE_BOOL },
+ 	[CSA_BLOCK_TX] = { "block_tx", BLOBMSG_TYPE_BOOL },
++	[CSA_REASON] = { "reason", BLOBMSG_TYPE_INT32 },
+ };
+ 
+ #ifdef NEED_AP_MLME
+@@ -810,7 +812,7 @@ void hostapd_dfs_csa_timeout(void *eloop
+ 		   iface->conf->ieee80211ac, iface->conf->ieee80211ax);
+ 
+ 	ret = hostapd_enable_iface(iface);
+-	if (ret == 0)
++	if (ret == 0 && css->reason == 0)
+ 		hostapd_ubus_handle_channel_switch_event(iface,
+ 						HOSTAPD_UBUS_HIGH_INTERFERENCE,
+ 						iface->freq);
+@@ -994,6 +996,7 @@ hostapd_switch_chan(struct ubus_context
+ 	SET_CSA_SETTING(CSA_HT, freq_params.ht_enabled, bool);
+ 	SET_CSA_SETTING(CSA_VHT, freq_params.vht_enabled, bool);
+ 	SET_CSA_SETTING(CSA_BLOCK_TX, block_tx, bool);
++	SET_CSA_SETTING(CSA_REASON, reason, u32);
+ 
+ 	wpa_printf(MSG_INFO, "%s: CSS freq=%d chan=%d sec_chan_off=%d, width=%d, seg0=%d, seg1=%d", __func__,
+ 		css.freq_params.freq,
+@@ -1015,7 +1018,9 @@ hostapd_switch_chan(struct ubus_context
+ 			return UBUS_STATUS_NOT_SUPPORTED;
+ 	}
+ 
+-	hostapd_ubus_handle_channel_switch_event(hapd->iface,HOSTAPD_UBUS_HIGH_INTERFERENCE,  css.freq_params.freq);
++	if (css.reason == 0) {
++		hostapd_ubus_handle_channel_switch_event(hapd->iface, HOSTAPD_UBUS_HIGH_INTERFERENCE, css.freq_params.freq);
++	}
+ 
+ 	return UBUS_STATUS_OK;
+ #undef SET_CSA_SETTING
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -2291,6 +2291,7 @@ struct beacon_data {
+  * @freq_params: Next channel frequency parameter
+  * @beacon_csa: Beacon/probe resp/asooc resp info for CSA period
+  * @beacon_after: Next beacon/probe resp/asooc resp info
++ * @reason: The reason why we are switching the channel
+  * @counter_offset_beacon: Offset to the count field in beacon's tail
+  * @counter_offset_presp: Offset to the count field in probe resp.
+  */
+@@ -2301,6 +2302,7 @@ struct csa_settings {
+ 	struct hostapd_freq_params freq_params;
+ 	struct beacon_data beacon_csa;
+ 	struct beacon_data beacon_after;
++	u32 reason;
+ 
+ 	u16 counter_offset_beacon[2];
+ 	u16 counter_offset_presp[2];

feeds/wifi-trunk/hostapd/patches/908-ubus-fix-client-events.patch

@@ -0,0 +1,111 @@
+--- a/src/ap/ubus.c
++++ b/src/ap/ubus.c
+@@ -578,6 +578,7 @@ static int hostapd_clear_session(struct
+ 	{
+ 		if (session_id == rec->session_id) {
+ 			/* dec counter and delete */
++			wpa_printf(MSG_INFO, "%s Deleting client session with session id %llu", __func__, session_id);
+ 			cached_events_nr -= rec->rec_nr;
+ 			avl_delete(&hapd->ubus.rt_events, &rec->avl);
+ 			os_free(rec->records);
+@@ -631,6 +632,10 @@ static int hostapd_sessions(struct ubus_
+ 		/* messages for current session */
+ 		for (size_t i = 0; i < rec->rec_nr; i++) {
+ 			c_rec = &rec->records[i];
++			if (c_rec->processed) {
++				/* Record is already reported, continue */
++				continue;
++			}
+ 			/* check message type */
+ 			switch (c_rec->type) {
+ 			/* ClientAuthEvent */
+@@ -644,6 +649,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_u32(&b_ev, "auth_status", p->auth_status);
+ 				blobmsg_add_string(&b_ev, "ssid", p->ssid);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -663,6 +669,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_u8(&b_ev, "using11v", p->using11v);
+ 				blobmsg_add_string(&b_ev, "ssid", p->ssid);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -678,6 +685,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_u32(&b_ev, "internal_rc", p->internal_rc);
+ 				blobmsg_add_string(&b_ev, "ssid", p->ssid);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -691,6 +699,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_u64(&b_ev, "fdata_tx_up_ts_in_us", p->tx_ts.tv_sec * (uint64_t)1000000);
+ 				blobmsg_add_u64(&b_ev, "fdata_rx_up_ts_in_us", p->rx_ts.tv_sec * (uint64_t)1000000);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -703,6 +712,7 @@ static int hostapd_sessions(struct ubus_
+ 				blobmsg_add_string(&b_ev, "sta_mac", p->sta_mac);
+ 				blobmsg_add_string(&b_ev, "ip_address", p->ip_addr);
+ 				blobmsg_close_table(&b_ev, t_msg);
++				c_rec->processed = true;
+ 				break;
+ 			}
+ 
+@@ -1911,6 +1921,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_AUTH;
+ 		rp->u.auth.session_id = rec->session_id;
++		rp->processed = false;
+ 
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+@@ -1941,6 +1952,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_ASSOC;
+ 		rp->u.assoc.session_id = rec->session_id;
++		rp->processed = false;
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+ 		/* frequency */
+@@ -1985,6 +1997,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_DISASSOC;
+ 		rp->u.disassoc.session_id = rec->session_id;
++		rp->processed = false;
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+ 		/* frequency */
+@@ -2016,6 +2029,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_FDATA;
+ 		rp->u.fdata.session_id = rec->session_id;
++		rp->processed = false;
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+ 		/* STA MAC */
+@@ -2044,6 +2058,7 @@ int hostapd_ubus_handle_rt_event(struct
+ 		struct client_session_record *rp = &rec->records[rec->rec_nr - 1];
+ 		rp->type = CST_IP;
+ 		rp->u.ip.session_id = rec->session_id;
++		rp->processed = false;
+ 		/* timestamp */
+ 		rp->timestamp = timestamp;
+ 		/* STA MAC */
+--- a/src/ap/ubus.h
++++ b/src/ap/ubus.h
+@@ -110,6 +110,7 @@ struct client_ip_event {
+ };
+ 
+ struct client_session_record {
++	bool processed;
+ 	int type;
+ 	uint64_t timestamp;
+ 	union {

feeds/wlan-ap/apc/Makefile

@@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/apc
   SECTION:=base
-  DEPENDS:=+libev +libinterapcomm
+  DEPENDS:=+libev +libinterapcomm +libubus +libubox
   CATEGORY:=Base system
   TITLE:=Access Point Coordinator
 endef
@@ -33,5 +33,11 @@ endef
 define Package/apc/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/apc $(1)/usr/bin
+	chmod 0700 $(1)/usr/bin/apc
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/apc.init $(1)/etc/init.d/apc
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_BIN) ./files/apc.config $(1)/etc/config/apc
+
 endef
 $(eval $(call BuildPackage,apc))

feeds/wlan-ap/apc/files/apc.init

@@ -0,0 +1,20 @@
+#!/bin/sh /etc/rc.common
+
+USE_PROCD=1
+START=40
+STOP=40
+
+PROG="/usr/bin/apc"
+
+start_service() {
+    procd_open_instance
+    echo "Starting APC"
+    procd_set_param command ${PROG}
+    procd_set_param respawn
+    procd_close_instance
+}
+
+stop_service() {
+    echo "Killing APC"
+    killall -s SIGTERM apc
+}

feeds/wlan-ap/apc/src/Makefile

@@ -3,19 +3,21 @@ srcdir ?= .
 VPATH ?= $(srcdir)/src
 
 
-LIBS = -lpthread -lrt -linterapcomm -lev
+LIBS = -lpthread -lrt -linterapcomm -lev -lubus -lubox
 $(call output,usr/sbin/wc-apc)
 
 CFLAGS += -I./include/ \
 	-I../include/
 
+CFLAGS += -DUBUS_SUPPORT
+
 CFLAGS  += -Wall -g
 CFLAGS += -MMD -Wall -g -Wpointer-arith -Wcast-qual -Wshadow \
 				-Waggregate-return -Wnested-externs -Wstrict-prototypes \
 				-fno-omit-frame-pointer -g -rdynamic -fexceptions -funwind-tables -funsigned-char
 
 OBJS := apc_main.o \
-               hello.o iface.o neighbor.o apc.o
+               hello.o iface.o neighbor.o apc.o ubus.o
 
 all: apc
 

feeds/wlan-ap/apc/src/include/apc.h

@@ -262,6 +262,8 @@ struct apc_neighbor
 #define APC_IS_DROTHER 4   /* I'm on BCAST or NBMA and I'm not DR */
 #define APC_IS_BACKUP  5   /* I'm BDR */
 #define APC_IS_DR      6   /* I'm DR */
+#define APC_MAX_MODE   7
+
 
 /* Definitions for interface state machine */
 #define ISM_UP      0   /* Interface Up */

feeds/wlan-ap/apc/src/include/lib/timer.h

@@ -30,4 +30,9 @@ static inline timer * tm_new_set( void (*hook)(struct _timer *), void *data, uns
     return t;
 }
 
+static inline void tm_free(timer *t)
+{
+    free(t);
+}
+
 #endif

feeds/wlan-ap/apc/src/include/ubus.h

@@ -0,0 +1,22 @@
+/*
+ * netifd - network interface daemon
+ * Copyright (C) 2012 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __NETIFD_UBUS_H
+#define __NETIFD_UBUS_H
+
+extern struct ubus_context *ubus_ctx;
+
+int ubus_init();
+void ubus_done(void);
+
+#endif

feeds/wlan-ap/apc/src/src/apc.c

@@ -27,6 +27,7 @@ static struct proto * apc_init(struct proto_config * c)
 {
 	struct proto * P = mb_allocz(sizeof(struct apc_proto));
 
+	printf("apc_init\n");
 	P->cf = c;
 	P->debug = c->debug;
 	P->mrtdump = c->mrtdump;

feeds/wlan-ap/apc/src/src/apc_main.c

@@ -21,9 +21,11 @@
 #include <nest/apcn.h>
 #include <apc.h>
 #include <protocol.h>
+#include <ubus.h>
 
-static ev_io iac_io;
-static ev_timer  check_timer;
+#include <libubus.h>
+static struct uloop_timeout check_timer;
+static void check_timer_handler(struct uloop_timeout *timeout);
 static unsigned int CheckIp;
 static int CheckCount;
 
@@ -228,8 +230,7 @@ int set_socket(void)
 /*************************************/
 
 
-static void check_timer_handler(struct ev_loop *loop, ev_timer *timer,
-				 int revents) 
+static void check_timer_handler(struct uloop_timeout *timeout)
 {
 	timers_go();
 	if (WaitingToReelect)
@@ -252,29 +253,56 @@ static void check_timer_handler(struct ev_loop *loop, ev_timer *timer,
 		if (CheckIp && (MyIpAddr != CheckIp))
 		{
 			printf("IP address changed from %x to %x - restart APC election\n", MyIpAddr, CheckIp);
+			system("/usr/opensync/bin/ovsh u APC_State dr_addr:=0.0.0.0 bdr_addr:=0.0.0.0 enabled:=false mode:=NC");
+			uloop_done();
+			ubus_done();
+			interap_rcv_close();
 			exit(0);
 		}
 		
 		CheckCount = 0;
-		if (ApcSpecSaved.IsApc == I_AM_APC)
-		{
-		//Radius stuff
-		}
 	}
+
+	uloop_timeout_set(&check_timer, 1000);
+	uloop_timeout_add(&check_timer);
+
 }
 
+static void handle_signal(int signo)
+{
+	uloop_done();
+	ubus_done();
+	interap_rcv_close();
+	system("/usr/opensync/bin/ovsh u APC_State dr_addr:=0.0.0.0 bdr_addr:=0.0.0.0 enabled:=false mode:=NC");
+}
+
+static void set_signals(void)
+{
+	struct sigaction s;
+
+	memset(&s, 0, sizeof(s));
+	s.sa_handler = handle_signal;
+	s.sa_flags = 0;
+	sigaction(SIGINT, &s, NULL);
+	sigaction(SIGTERM, &s, NULL);
+	sigaction(SIGPIPE, &s, NULL);
+}
+
+extern struct ubus_context *ubus_ctx;
+
 int main(int argc, char *const* argv)
 {
 	struct proto_config c;
 	struct proto * apc_proto;
-	struct ev_loop *loop = EV_DEFAULT;
+	uloop_init();
+	/*init term signals*/
+	set_signals();
 
 	/*Socket*/
 	set_socket();
 
 	/*Radius stuff*/
 
-	printf("Basic MAC\n");
 	memset(MyBasicMac, 0, 6);
 	if (get_mac_addr("br-wan", MyBasicMac) == 0) {
 		printf("APC: br-wan mac:%02X:%02X:%02X:%02X:%02X:%02X\n",
@@ -291,6 +319,7 @@ int main(int argc, char *const* argv)
 
 	/*get local ip of br-wan*/
 	MyIpAddr = 0;
+	printf("Getting br-wan IP\n");
 	while(1)
 	{
 		GetLocalIpv4Addr((unsigned char *)&MyIpAddr, "br-wan");
@@ -303,9 +332,13 @@ int main(int argc, char *const* argv)
 
 	/*listening interAP*/
 	callback cb = receive_from_socket;
+
 	if (interap_recv(IAC_APC_ELECTION_PORT, cb, 1000,
-			 loop, &iac_io) < 0)
+			 NULL, NULL) < 0) {
 		printf("Error: Failed InterAP receive");
+		return 1;
+	}
+
 
 	memset(Timers, 0, sizeof(Timers));
 	
@@ -319,11 +352,15 @@ int main(int argc, char *const* argv)
 	ApcProto = (struct apc_proto *)apc_proto;
 	proto_apc.start(apc_proto);
 
-	ev_timer_init(&check_timer, check_timer_handler, 1, 1);
+	check_timer.cb = check_timer_handler;
+	uloop_timeout_set(&check_timer, 1000);
+	uloop_timeout_add(&check_timer);
 
-	ev_timer_start(loop, &check_timer);
-
-	ev_run(loop, 0);
+	ubus_init();
+	uloop_run();
+	uloop_done();
+	ubus_done();
+	interap_rcv_close();
 
 	return(1);
 }

feeds/wlan-ap/apc/src/src/hello.c

@@ -103,6 +103,7 @@ void apc_send_hello(struct apc_iface * ifa, int kind )
 	struct apc_hello2_packet ps;
 	unsigned int length, report = 0;
 	struct apc_spec ApcSpec;
+	char dst_ip[16];
 	
 	if (WaitingToReelect )
 		return;
@@ -188,8 +189,11 @@ void apc_send_hello(struct apc_iface * ifa, int kind )
 			else
 				ApcSpec.FloatIp = ApcSpecSaved.FloatIp;
 		}
-		else
+		else if (ApcSpec.IsApc == I_AM_BAPC )
 		{
+			ifa->priority = 0x12;
+		}
+		else {
 			ifa->priority = 0x11;
 			if ((ApcSpecSaved.IsApc == I_AM_APC) || BackingUpRadius )
 			{
@@ -202,8 +206,7 @@ void apc_send_hello(struct apc_iface * ifa, int kind )
 
 	length += i * sizeof(u32);
 
-	printf("HELLO packet sent via %s\n", ifa->ifname );
-	char *dst_ip = malloc(16);
+	printf("HELLO packet sent via  %s\n", ifa->ifname );
 	memset(dst_ip, 0, 16);
 	if ((get_current_ip(dst_ip, IAC_IFACE)) < 0) {
 		printf("Error: Cannot get IP for %s", IAC_IFACE);

feeds/wlan-ap/apc/src/src/iface.c

@@ -168,7 +168,7 @@ void apc_iface_new( void )
 	ifa->priority = 0x11;
 	ifa->drip = MyIpAddr;
 	ifa->helloint = 4;
-	ifa->deadint = 16;
+	ifa->deadint = 12;
 	ifa->waitint = 16;
 	
 	ifa->type = APC_IT_BCAST;

feeds/wlan-ap/apc/src/src/neighbor.c

@@ -33,11 +33,10 @@ reset_lists(struct apc_proto *p, struct apc_neighbor *n)
 {
 }
 
-
 struct apc_neighbor * apc_neighbor_new(struct apc_iface * ifa)
 {
 	struct apc_neighbor * n = mb_allocz(sizeof(struct apc_neighbor));
-	
+	printf("apc_new_neighbor\n");	
 	n->ifa = ifa;
 	add_tail(&ifa->neigh_list, NODE n);
 	n->adj = 0;
@@ -52,7 +51,6 @@ struct apc_neighbor * apc_neighbor_new(struct apc_iface * ifa)
 	return(n);
 }
 
-
 static void apc_neigh_down(struct apc_neighbor * n)
 {
 	struct apc_iface * ifa = n->ifa;
@@ -60,9 +58,10 @@ static void apc_neigh_down(struct apc_neighbor * n)
 	rem_node(NODE n);
 	
 	printf("Neighbor %x on %s removed", n->rid, ifa->ifname );
+	tm_free(n->inactim);
+	mb_free(n);
 }
 
-
 /**
  * apc_neigh_chstate - handles changes related to new or lod state of neighbor
  * @n: APC neighbor
@@ -81,7 +80,8 @@ static void apc_neigh_chstate(struct apc_neighbor * n, u8 state)
 		return;
 	
 	printf("Neighbor %x on %s changed state from %s to %s\n",
-	                n->rid, ifa->ifname, apc_ns_names[old_state], apc_ns_names[state] );
+	                n->rid, ifa->ifname, apc_ns_names[old_state],
+			apc_ns_names[state]);
 	
 	n->state = state;
 
@@ -121,7 +121,6 @@ static void apc_neigh_chstate(struct apc_neighbor * n, u8 state)
 		apc_iface_sm(ifa, ISM_NEICH);
 }
 
-
 /**
  * apc_neigh_sm - apc neighbor state machine
  * @n: neighor
@@ -218,7 +217,6 @@ void apc_neigh_sm(struct apc_neighbor * n, int event)
 	}
 }
 
-
 static int can_do_adj(struct apc_neighbor * n)
 {
 	struct apc_iface * ifa = n->ifa;
@@ -257,13 +255,11 @@ static int can_do_adj(struct apc_neighbor * n)
 	return i;
 }
 
-
 static inline u32 neigh_get_id(struct apc_proto *p, struct apc_neighbor *n)
 {
 	return ipa_to_u32(n->ip);
 }
 
-
 static struct apc_neighbor * elect_bdr( struct apc_proto * p, list nl)
 {
     struct apc_neighbor *neigh, *n1, *n2;
@@ -271,7 +267,7 @@ static struct apc_neighbor * elect_bdr( struct apc_proto * p, list nl)
 
     n1 = NULL;
     n2 = NULL;
-    WALK_LIST( neigh, nl )                      /* First try those decl. themselves */
+    WALK_LIST( neigh, nl )                /* First try those decl. themselves */
     {
         nid = neigh_get_id( p, neigh );
 
@@ -317,7 +313,6 @@ static struct apc_neighbor * elect_bdr( struct apc_proto * p, list nl)
     return( n1 );
 }
 
-
 static struct apc_neighbor * elect_dr( struct apc_proto * p, list nl )
 {
     struct apc_neighbor *neigh, *n;
@@ -351,7 +346,6 @@ static struct apc_neighbor * elect_dr( struct apc_proto * p, list nl )
     return( n );
 }
 
-
 /**
  * apc_dr_election - (Backup) Designed Router election
  * @ifa: actual interface
@@ -450,7 +444,6 @@ void apc_dr_election(struct apc_iface * ifa)
 	}
 }
 
-
 struct apc_neighbor * find_neigh_by_ip(struct apc_iface * ifa, ip_addr ip)
 {
 	struct apc_neighbor * n;
@@ -463,7 +456,6 @@ struct apc_neighbor * find_neigh_by_ip(struct apc_iface * ifa, ip_addr ip)
 	return NULL;
 }
 
-
 static void inactivity_timer_hook(struct _timer * tmr)
 {
 	struct apc_neighbor * n = (struct apc_neighbor *) tmr->data;
@@ -490,13 +482,17 @@ static void inactivity_timer_hook(struct _timer * tmr)
 			n_neigh += 1;
 			//Radius stuff
 			BackingUpRadius = 1;
+			apc_ifa->priority = 0x33;
 		}
+		else
+			apc_ifa->priority = 0x11;
+
 
 		apc_ifa->drip = MyIpAddr;
-		apc_ifa->priority = 0x11;
 		apc_ifa->bdrip = 0;
 		memset(&ApcSpec, 0, sizeof(struct apc_spec));
-		WaitingToReelect = 12;
+		WaitingToReelect = 3;
+
 		return;
 	}
 	printf("Inactivity timer expired for nbr %x on %s", n->rid, 

feeds/wlan-ap/apc/src/src/ubus.c

@@ -0,0 +1,211 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <string.h>
+#include <stdio.h>
+#include <ev.h>
+#include "ubus.h"
+#include <libubus.h>
+#include <libubox/blobmsg.h>
+#include <apc.h>
+#include <libubox/uloop.h>
+
+struct ubus_context *ubus_ctx = NULL;
+static struct blob_buf b;
+static struct blob_buf nb;
+timer *notify_timer;
+extern struct apc_iface * apc_ifa;
+/* Mandatorily Notify APC_State period */
+#define APC_NOTIFY_INTERVAL 10
+/* Check if any change in APC State and notify period */
+#define APC_NOTIFY_CHECK 1
+static ip_addr old_drip;
+static ip_addr old_bdrip;
+static u8 old_state;
+static unsigned int ucount = 0;
+
+struct apc_state {
+	char mode[4];
+	char dr_addr[17];
+	char bdr_addr[17];
+	bool enabled;
+} state;
+
+static int
+apc_info_handle(struct ubus_context *ctx, struct ubus_object *obj,
+			  struct ubus_request_data *req, const char *method,
+			  struct blob_attr *msg);
+
+static void ubus_reconnect_timer(struct uloop_timeout *timeout);
+static struct uloop_timeout reconnect = {
+	.cb = ubus_reconnect_timer,
+};
+
+static void ubus_reconnect_timer(struct uloop_timeout *timeout)
+{
+        if (ubus_reconnect(ubus_ctx, NULL) != 0) {
+                printf("APC ubus failed to reconnect\n");
+                uloop_timeout_set(&reconnect, 2000);
+                return;
+        }
+
+        printf("APC ubus reconnected\n");
+#ifdef FD_CLOEXEC
+	fcntl(ubus_ctx->sock.fd, F_SETFD,
+	      fcntl(ubus_ctx->sock.fd, F_GETFD) | FD_CLOEXEC);
+#endif
+}
+
+static void ubus_connection_lost(struct ubus_context *ctx)
+{
+	printf("APC ubus connection lost\n");
+        ubus_reconnect_timer(NULL);
+}
+
+static const struct blobmsg_policy apc_policy = {
+	.name = "info",
+	.type = BLOBMSG_TYPE_STRING,
+};
+
+static struct ubus_method apc_object_methods[] = {
+	UBUS_METHOD_NOARG("info", apc_info_handle),
+};
+
+static struct ubus_object_type apc_object_type =
+	UBUS_OBJECT_TYPE("apc", apc_object_methods);
+
+static struct ubus_object apc_object = {
+	.name = "apc",
+	.type = &apc_object_type,
+	.methods = apc_object_methods,
+	.n_methods = ARRAY_SIZE(apc_object_methods),
+};
+
+static int
+apc_info_handle(struct ubus_context *ctx, struct ubus_object *obj,
+			  struct ubus_request_data *req, const char *method,
+			  struct blob_attr *msg)
+{
+	blob_buf_init(&b, 0);
+	blobmsg_add_string(&b, "mode", state.mode);
+	blobmsg_add_string(&b, "dr_addr", state.dr_addr);
+	blobmsg_add_string(&b, "bdr_addr", state.bdr_addr);
+	blobmsg_add_u8(&b, "enabled", state.enabled);
+
+	ubus_notify(ctx, &apc_object, "apc", b.head, -1);
+	ubus_send_event(ctx, "apc", b.head);
+	ubus_send_reply(ctx, req, b.head);
+
+	return 0;
+}
+
+static char apc_mode[APC_MAX_MODE][8] = {"DOWN", "LOOP", "WT", "PTP", "OR", "BDR", "DR"};
+int apc_update_state(void)
+{
+	struct in_addr dr_addr;
+	struct in_addr bdr_addr;
+	ip_addr cur_drip;
+	ip_addr cur_bdrip;
+	u8 cur_state;
+
+	cur_drip = apc_ifa->drip;
+	cur_bdrip = apc_ifa->bdrip;
+	cur_state = apc_ifa->state;
+	ucount++;
+
+	if (cur_drip == old_drip &&
+	    cur_bdrip == old_bdrip &&
+	    cur_state == old_state && ucount < APC_NOTIFY_INTERVAL) {
+		return -1;
+	}
+
+	printf("APC State update %u", ucount);
+	ucount = 0;
+
+	dr_addr.s_addr = htonl(cur_drip);
+	bdr_addr.s_addr = htonl(cur_bdrip);
+
+	state.enabled = true;
+	if ((cur_state == APC_IS_DR) ||
+	    (cur_state == APC_IS_BACKUP) ||
+	    (cur_state == APC_IS_DROTHER)) {
+		snprintf(state.mode, sizeof(state.mode), "%s",
+			 &apc_mode[cur_state][0]);
+		snprintf(state.dr_addr, sizeof(state.dr_addr),
+			 "%s", inet_ntoa(dr_addr));
+		snprintf(state.bdr_addr, sizeof(state.bdr_addr),
+			 "%s", inet_ntoa(bdr_addr));
+	} else if (apc_ifa->state == APC_IS_WAITING) {
+		snprintf(state.mode, sizeof(state.mode), "%s",
+			 &apc_mode[cur_state][0]);
+		snprintf(state.dr_addr, sizeof(state.dr_addr), "0.0.0.0");
+		snprintf(state.bdr_addr, sizeof(state.bdr_addr), "0.0.0.0");
+	} else {
+		snprintf(state.mode, sizeof(state.mode), "NC");
+		snprintf(state.dr_addr, sizeof(state.dr_addr), "0.0.0.0");
+		snprintf(state.bdr_addr, sizeof(state.bdr_addr), "0.0.0.0");
+	}
+
+	old_drip = cur_drip;
+	old_bdrip = cur_bdrip;
+	old_state = cur_state;
+
+	return 0;
+}
+
+void apc_send_notification(struct _timer * tmr)
+{
+	int ustate = 0;
+
+	ustate = apc_update_state();
+	if(ustate != 0)
+		return;
+
+	printf("APC send ubus notification\n");
+	blob_buf_init(&nb, 0);
+	blobmsg_add_string(&nb, "mode", state.mode);
+	blobmsg_add_string(&nb, "dr_addr", state.dr_addr);
+	blobmsg_add_string(&nb, "bdr_addr", state.bdr_addr);
+	blobmsg_add_u8(&nb, "enabled", state.enabled);
+	ubus_notify(ubus_ctx, &apc_object, "apc", nb.head, -1);
+}
+
+static void add_object(struct ubus_object *obj)
+{
+	int ret = ubus_add_object(ubus_ctx, obj);
+
+	if (ret != 0)
+		fprintf(stderr, "Add object fail '%s': %s\n",
+			obj->name, ubus_strerror(ret));
+}
+
+int
+ubus_init(void) {
+	ubus_ctx = ubus_connect(NULL);
+	if (!ubus_ctx)
+		return -EIO;
+
+	ubus_add_uloop(ubus_ctx);
+#ifdef FD_CLOEXEC
+	fcntl(ubus_ctx->sock.fd, F_SETFD,
+	      fcntl(ubus_ctx->sock.fd, F_GETFD) | FD_CLOEXEC);
+#endif
+	add_object(&apc_object);
+	notify_timer = tm_new_set(apc_send_notification, NULL,
+				  0, APC_NOTIFY_CHECK);
+	if (notify_timer) {
+		printf("APC Start state check and notify timer\n");
+		tm_start(notify_timer, APC_NOTIFY_CHECK);
+	}
+
+	ubus_ctx->connection_lost = ubus_connection_lost;
+
+	return 0;
+}
+
+void
+ubus_done(void)
+{
+	ubus_free(ubus_ctx);
+}

feeds/wlan-ap/interAPcomm/Makefile

@@ -11,6 +11,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/libinterapcomm
   SECTION:=libs
+  DEPENDS:=+libev +libubox +libubus
   CATEGORY:=Libraries
   TITLE:=Inter AP communication library
 endef
@@ -29,5 +30,8 @@ endef
 define Package/libinterapcomm/install
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libinterapcomm.so $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/interap.init $(1)/etc/init.d/interap
+
 endef
 $(eval $(call BuildPackage,libinterapcomm))

feeds/wlan-ap/interAPcomm/files/interap.init

@@ -0,0 +1,35 @@
+#!/bin/sh /etc/rc.common
+
+START=12
+STOP=12
+
+start() {
+	apc=`cat /etc/config/firewall | grep Allow-APC`
+	ucc=`cat /etc/config/firewall | grep Allow-UCC`
+
+	if [ -z "$apc" ]; then
+		uci add firewall rule
+		uci set firewall.@rule[-1].name='Allow-APC'
+		uci set firewall.@rule[-1].src='wan'
+		uci set firewall.@rule[-1].proto='udp'
+		uci set firewall.@rule[-1].dst_port='50010'
+		uci set firewall.@rule[-1].target='ACCEPT'
+		uci set firewall.@rule[-1].family='ipv4'
+		uci commit firewall
+	fi
+
+	if [ -z "$ucc" ]; then
+		uci add firewall rule
+		uci set firewall.@rule[-1].name='Allow-UCC'
+		uci set firewall.@rule[-1].src='wan'
+		uci set firewall.@rule[-1].proto='udp'
+		uci set firewall.@rule[-1].dst_port='50000'
+		uci set firewall.@rule[-1].target='ACCEPT'
+		uci set firewall.@rule[-1].family='ipv4'
+		uci commit firewall
+	fi
+}
+
+stop() {
+	echo stop
+}

feeds/wlan-ap/interAPcomm/src/Makefile

@@ -6,7 +6,7 @@ subdirs=src/test
 
 CFLAGS += -O -Wall -Werror -Wshadow
 CFLAGS += -I./include/
-LIBS = -lev
+LIBS = -lev -lubox -lubus
 
 all: $(LIBNAME) $(subdirs)
 

feeds/wlan-ap/interAPcomm/src/include/interAPcomm.h

@@ -5,6 +5,7 @@ int interap_send(unsigned short port, char *dst_ip,
 int interap_recv(unsigned short port, int (*recv_cb)(void *, ssize_t),
 		 unsigned int len, struct ev_loop *loop,
 		 ev_io *io);
+void interap_rcv_close(void);
 
 typedef int (*callback)(void *, ssize_t);
 typedef struct recv_arg {

feeds/wlan-ap/interAPcomm/src/src/interAPcomm.c

@@ -7,12 +7,31 @@
 #include <string.h>
 #include <unistd.h>
 #include <interAPcomm.h>
+#include <libubox/uloop.h>
 
 /*Receiver socket*/
 int recv_sock = -1;
 
 recv_arg ra;
 
+static void receive_data_uloop(struct uloop_fd *fd, unsigned int events)
+{
+	void *recv_data;
+	ssize_t recv_data_len;
+
+	recv_data = malloc(ra.len);
+	memset(recv_data, 0, ra.len);
+	if ((recv_data_len = recvfrom(recv_sock, recv_data, ra.len,
+				      0, NULL, 0)) < 0) {
+		printf("recvfrom() failed");
+		return;
+	}
+
+	ra.cb(recv_data, recv_data_len);
+	free(recv_data);
+
+}
+
 static void receive_data(struct ev_loop *ev, ev_io *io, int event)
 {
 	void *recv_data;
@@ -25,11 +44,14 @@ static void receive_data(struct ev_loop *ev, ev_io *io, int event)
 		printf("recvfrom() failed");
 
 	ra.cb(recv_data, recv_data_len);
+	free(recv_data);
 
 }
 
-int interap_recv(unsigned short port, int (*recv_cb)(void *, ssize_t), unsigned int len,
-		 struct ev_loop *loop, ev_io *io)
+static struct uloop_fd server;
+
+int interap_recv(unsigned short port, int (*recv_cb)(void *, ssize_t),
+		 unsigned int len, struct ev_loop *loop, ev_io *io)
 {
 	struct sockaddr_in addr;
 	int bcast_perm;
@@ -65,12 +87,25 @@ int interap_recv(unsigned short port, int (*recv_cb)(void *, ssize_t), unsigned
 	}
 
 	printf("Interap recving: p:%d\n", port);
-	ev_io_init(io, receive_data, recv_sock, EV_READ);
-	ev_io_start(loop, io);
+
+	if (io && loop) {
+		ev_io_init(io, receive_data, recv_sock, EV_READ);
+		ev_io_start(loop, io);
+	} else {
+
+		server.cb = receive_data_uloop;
+		server.fd = recv_sock;
+		uloop_fd_add(&server, ULOOP_READ);
+	}
 
 	return 0;
 }
 
+void interap_rcv_close(void)
+{
+	close(recv_sock);
+}
+
 int interap_send(unsigned short port, char *dst_ip, void *data,
 		 unsigned int len)
 {

feeds/wlan-ap/interAPcomm/src/src/test/Makefile

@@ -3,7 +3,7 @@ OBJS = interapcommtest.o
 
 CFLAGS += -Wall $(EXTRA_CFLAGS) $(extra_cflags-y)
 
-LIBS =	-L ../../ -linterapcomm -lev
+LIBS =	-L ../../ -linterapcomm -lev -lubox -lubus
 
 CFLAGS += -I. \
 	-I../../include/

feeds/wlan-ap/interAPcomm/src/src/test/interapcommtest.c

@@ -6,6 +6,8 @@
 #include <ev.h>
 #include <interAPcomm.h>
 
+#include <libubus.h>
+
 struct my_data {
 	int x;
 	char y;
@@ -13,7 +15,8 @@ struct my_data {
 };
 
 
-int recv_process(void *data) {
+int recv_process(void *data, ssize_t n)
+{
 	struct my_data *dat = (struct my_data*) data;
 
 	printf("Recv process: %d, %c, %d\n", dat->x, dat->y, dat->z);
@@ -22,34 +25,37 @@ int recv_process(void *data) {
 
 int main (int argc, char *argv[ ])
 {
-	unsigned int send = atoi(argv[1]);   /* First arg: broadcast port */
-	unsigned short port = 50000;
+	unsigned int send = atoi(argv[1]);
+	unsigned short port = 50020;
 //	char *dst_ip = "255.255.255.255";
-	char *dst_ip = "192.168.9.255";
+	char *dst_ip = "10.42.0.255";
 //	char *data = "InterAP Hello";
 	struct my_data data;
 	data.x = 1001;
 	data.y = 'H';
 	data.z = 3003;
 
-//	callback cb = recv_process;
-
-
-	printf("arg1 = %d\n", send);
+	printf("send = %d\n", send);
 
 	if (send) {
 		printf("Send");
-		interap_send(port, dst_ip, &data, sizeof(data));
+		while (1)
+		{
+			sleep(3);
+			printf("Sending...\n");
+			interap_send(port, dst_ip, &data, sizeof(data));
+		}
 	}
 	else {
 		printf("Recieve");
-//		interap_recv(port, cb, sizeof(struct my_data));
+		uloop_init();
+		callback cb = recv_process;
+
+		interap_recv(port, cb, sizeof(struct my_data), NULL, NULL);
+		uloop_run();
+		uloop_done();
+
 	}
 
-	while (1)
-	{
-		sleep(3);
-		printf("In while loop\n");
-	}
 	return 1;
 }

feeds/wlan-ap/luci/luci-mod-simple/htdocs/luci-static/resources/view/setup.js

@@ -444,6 +444,10 @@ return view.extend({
 		o.datatype = 'ip4addr("nomask")';
 		o.depends('proto', 'static');
 
+		o = s.option(form.Button, 'save', _(''));
+		o.inputtitle = _('Save Settings');
+		o.onclick = ui.createHandlerFn(this, 'handleSettingsSave', m);
+
 		s = m.section(form.NamedSection, 'lan', 'lan', _('LAN'));
 
 		o = s.option(form.Value, 'addr', _('IP Address'));
@@ -456,7 +460,7 @@ return view.extend({
 
 		o = s.option(form.Button, 'save', _(''));
 		o.inputtitle = _('Save Settings');
-		o.onclick = ui.createHandlerFn(this, 'handleSettingsSave', m);
+		o.onclick = ui.createHandlerFn(this, 'handleLANSettingsSave', m);
 
 		s = m.section(form.NamedSection, 'maintenance', 'maintenance', _('System Maintenance'));
 

feeds/wlan-ap/luci/luci-theme-tip/htdocs/luci-static/tip/cascade.css

@@ -1,4 +1,12 @@
-@import url('https://fonts.googleapis.com/css2?family=Montserrat&display=swap');
+/* latin */
+@font-face {
+	font-family: 'Montserrat';
+	font-style: normal;
+	font-weight: 400;
+	font-display: swap;
+	src: url(Montserrat_latin.woff2) format('woff2');
+	unicode-range: U+0000-00FF, U+0131, U+0152-0153, U+02BB-02BC, U+02C6, U+02DA, U+02DC, U+2000-206F, U+2074, U+20AC, U+2122, U+2191, U+2193, U+2212, U+2215, U+FEFF, U+FFFD;
+}
 
 :root {
 	--main-bright-color: #1B465C;

feeds/wlan-ap/nft-qos/Makefile

@@ -48,13 +48,8 @@ define Package/nft-qos/install
 	$(INSTALL_DIR) $(1)/lib/nft-qos
 	$(INSTALL_DATA) ./files/lib/* $(1)/lib/nft-qos/
 	chmod 0700 $(1)/lib/nft-qos/mac-rate.sh
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) ./files/nft-qos.config $(1)/etc/config/nft-qos
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN) ./files/nft-qos.init $(1)/etc/init.d/nft-qos
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/dhcp
-	$(INSTALL_BIN) ./files/nft-qos-monitor.hotplug $(1)/etc/hotplug.d/dhcp/00-nft-qos-monitor
-	$(INSTALL_BIN) ./files/nft-qos-dynamic.hotplug $(1)/etc/hotplug.d/dhcp/01-nft-qos-dynamic
 endef
 
 $(eval $(call BuildPackage,nft-qos))

feeds/wlan-ap/nft-qos/files/lib/mac-rate.sh

@@ -27,23 +27,31 @@ if [ -z "$1" -o -z "$2" -o -z "$3" ]; then
 	exit 1
 fi
 
-logger -t "$1 $2 $3"
+logger -t "mac-rate" "$1 $2 $3"
+
+bridge=`uci get wireless.$iface.network`
+if [ "$bridge" == "lan" ]; then
+	dlchain="download_nat"
+        ulchain="upload_nat"
+else
+        dlchain="download"
+        ulchain="upload"
+fi
 
 if [ "$1" == "add" ]; then
 	config_load wireless
 
 	config_foreach handle_interface wifi-iface download
-
-	exists=`nft list chain bridge nft-qos-ssid-lan-bridge download  -a | grep -ic $3`
+	exists=`nft list chain bridge nft-qos-ssid-lan-bridge $dlchain  -a | grep -ic $3`
 	logger -t "mac-rate" "exists = $exists"
 	if [ "$exists" -ne 0 ]; then
-		old_drate=`nft list chain bridge nft-qos-ssid-lan-bridge download -a | grep -i $3 |  awk -F'kbytes' '{print $1}' | awk '{print $NF}'`
+		old_drate=`nft list chain bridge nft-qos-ssid-lan-bridge $dlchain -a | grep -i $3 |  awk -F'kbytes' '{print $1}' | awk '{print $NF}'`
 		logger -t "mac-rate" "old_drate=$old_drate"
 		if [ "$old_drate" -ne "$rate" ]; then
 			changed=1
-			id=`nft list chain bridge nft-qos-ssid-lan-bridge download  -a | grep -i $3  | awk -F "handle " '{print $2;exit}'`
+			id=`nft list chain bridge nft-qos-ssid-lan-bridge $dlchain  -a | grep -i $3  | awk -F "handle " '{print $2;exit}'`
 			if [ -n "$id" ]; then
-				nft delete rule bridge nft-qos-ssid-lan-bridge download handle $id
+				nft delete rule bridge nft-qos-ssid-lan-bridge $dlchain handle $id
 			fi
 			logger -t "mac-rate" "changed DL $old_drate to $rate, del $3"
 		else
@@ -54,19 +62,19 @@ if [ "$1" == "add" ]; then
 
         if [ "$exists" == 0 -o "$changed" == 1 ]; then
 	        if [ "$rate" -ne 0 ]; then
-			dok=`nft add rule bridge nft-qos-ssid-lan-bridge download ether daddr $3 limit rate over $rate kbytes/second drop`
+			dok=`nft add rule bridge nft-qos-ssid-lan-bridge $dlchain ether daddr $3 limit rate over $rate kbytes/second drop`
 	        fi
         fi
 
 	config_foreach handle_interface wifi-iface upload
-	exists=`nft list chain bridge nft-qos-ssid-lan-bridge upload  -a | grep -ic $3`
+	exists=`nft list chain bridge nft-qos-ssid-lan-bridge $ulchain  -a | grep -ic $3`
 	if [ "$exists" -ne 0 ]; then
-		old_urate=`nft list chain bridge nft-qos-ssid-lan-bridge upload -a | grep -i $3 |  awk -F'kbytes' '{print $1}' | awk '{print $NF}'`
+		old_urate=`nft list chain bridge nft-qos-ssid-lan-bridge $ulchain -a | grep -i $3 |  awk -F'kbytes' '{print $1}' | awk '{print $NF}'`
 		if [ "$old_urate" -ne "$rate" ]; then
 			changed=1
-			id=`nft list chain bridge nft-qos-ssid-lan-bridge upload  -a | grep -i $3  | awk -F "handle " '{print $2;exit}'`
+			id=`nft list chain bridge nft-qos-ssid-lan-bridge $ulchain  -a | grep -i $3  | awk -F "handle " '{print $2;exit}'`
 			if [ -n "$id" ]; then
-				nft delete rule bridge nft-qos-ssid-lan-bridge upload handle $id
+				nft delete rule bridge nft-qos-ssid-lan-bridge $ulchain handle $id
 			fi
 
 			logger -t "mac-rate" "changed UL $old_urate to $rate del $3"
@@ -78,20 +86,20 @@ if [ "$1" == "add" ]; then
 
         if [ "$exists" == 0 -o "$changed" == 1 ]; then
         	if [ "$rate" -ne 0 ]; then
-			uok=`nft add rule bridge nft-qos-ssid-lan-bridge upload ether saddr $3 limit rate over $rate kbytes/second drop`
+			uok=`nft add rule bridge nft-qos-ssid-lan-bridge $ulchain ether saddr $3 limit rate over $rate kbytes/second drop`
 		fi
 	fi
 
 elif [ "$1" == "del" ]; then
-	id=`nft list chain bridge nft-qos-ssid-lan-bridge download  -a | grep -i $3  | awk -F "handle " '{print $2;exit}'`
+	id=`nft list chain bridge nft-qos-ssid-lan-bridge $dlchain  -a | grep -i $3  | awk -F "handle " '{print $2;exit}'`
 	logger -t "mac-rate" "$id $3"
 	if [ -n "$id" ]; then
-		nft delete rule bridge nft-qos-ssid-lan-bridge download handle $id
+		nft delete rule bridge nft-qos-ssid-lan-bridge $dlchain handle $id
 	fi
 
-	id=`nft list chain bridge nft-qos-ssid-lan-bridge upload  -a | grep -i $3  | awk -F "handle " '{print $2;exit}'`
+	id=`nft list chain bridge nft-qos-ssid-lan-bridge $ulchain  -a | grep -i $3  | awk -F "handle " '{print $2;exit}'`
 	if [ -n "$id" ]; then
-		nft delete rule bridge nft-qos-ssid-lan-bridge upload handle $id
+		nft delete rule bridge nft-qos-ssid-lan-bridge $ulchain handle $id
 	fi
 
 fi

feeds/wlan-ap/nft-qos/files/lib/ssid_ratelimit.sh

@@ -42,8 +42,20 @@ qosdef_append_rule_ssid() { # <section> <operator> <bridge>
 		rate=$((rate/8))
 	fi
 
-	if [ -z "$iface" -o -z "$rate" -o $rate == 0 ]; then
-		logger -t "nft-qos" "Error: No interface $iface or rate $rate present"
+	if [ -z "$iface" ]; then
+		logger -t "nft-qos" "Error: No interface $iface present"
+		return
+	fi
+
+	if [ -z "$rate" -o $rate == 0 ]; then
+		logger -t "nft-qos" "ssid-rate disabled $iface, configure client-rate"
+	        maclist=`iwinfo $iface assoclist | grep dBm | cut -f 1 -s -d" "`
+
+		for mac in $maclist
+		do
+			logger -t "nft-qos" "Add $mac"
+			/lib/nft-qos/mac-rate.sh add $iface $mac
+		done
 		return
 	fi
 

feeds/wlan-ap/nft-qos/files/nft-qos.init

@@ -4,49 +4,26 @@
 #
 
 . /lib/nft-qos/core.sh
-. /lib/nft-qos/monitor.sh
-. /lib/nft-qos/dynamic.sh
-. /lib/nft-qos/static.sh
-. /lib/nft-qos/priority.sh
 . /lib/nft-qos/ssid_ratelimit.sh
 
 START=99
 USE_PROCD=1
 
 service_triggers() {
-#	procd_add_reload_trigger nft-qos wireless
-#	procd_add_reload_trigger wireless
 
 	procd_open_validate
-#	qosdef_validate_dynamic
-#	qosdef_validate_static
-#	qosdef_validate_priority
 	procd_close_validate
 }
 
 start_service() {
 	config_load nft-qos
-
-#	qosdef_init_env
-#	qosdef_flush_static
-#	qosdef_flush_dynamic
 	qosdef_flush_ssid_ratelimit
-#	qosdef_remove_priority
-
-#	qosdef_init_header
-#	qosdef_init_monitor
-#	qosdef_validate_dynamic default qosdef_init_dynamic
-#	qosdef_validate_static default qosdef_init_static
-#	qosdef_validate_priority default qosdef_init_priority
 	qosdef_init_ssid_ratelimit
 	qosdef_init_done
 	qosdef_start
 }
 
 stop_service() {
-#	qosdef_flush_dynamic
-#	qosdef_flush_static
-#	qosdef_remove_priority
 	qosdef_flush_ssid_ratelimit
 	qosdef_clean_cache
 }

feeds/wlan-ap/opennds/Makefile

@@ -52,7 +52,6 @@ define Package/opennds/install
 	$(INSTALL_DIR) $(1)/usr/lib/opennds
 
 	$(CP) ./files/lib/splash.css $(1)/etc/opennds/htdocs/
-	$(CP) ./files/lib/Tip.png $(1)/etc/opennds/htdocs/images/
 	$(CP) ./files/lib/opennds $(1)/etc/config/
 	$(CP) ./files/etc/init.d/opennds $(1)/etc/init.d/
 	$(CP) ./files/lib/login.sh $(1)/usr/lib/opennds/

feeds/wlan-ap/opensync/files/bin/auto-conf

@@ -0,0 +1,17 @@
+#!/bin/sh
+# Finds the highest settings an AP can support for various settings when set to "auto" in config
+
+find_auto_hwmode() {
+	# This function finds the highest mode (hw_mode) that the AP can support
+
+	# Arguments
+	device=$1
+
+	mode='11n'
+	iw phy "$device" info | grep -q 'VHT Capabilities*' && mode="11ac"
+	iw phy "$device" info | grep -q 'HE.*Capabilities' && mode="11ax"
+
+	echo "$mode"
+}
+
+find_auto_hwmode $1

feeds/wlan-ap/opensync/files/bin/check_wan_link.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+if="$(uci get network.wan.ifname)"
+[ "$(cat /sys/class/net/"${if}"/carrier)" = 0 ] && {
+	return 0
+}
+return 1

feeds/wlan-ap/opensync/files/bin/dynamic_lookup.sh

@@ -0,0 +1,55 @@
+#! /bin/sh
+
+usage() {
+   echo "Usage: ${0} <realm>"
+   exit 1
+}
+
+test -n "${1}" || usage
+
+REALM="${1}"
+DIGCMD=$(command -v dig)
+PRINTCMD=$(command -v printf)
+
+validate_host() {
+         echo ${@} | tr -d '\n\t\r' | grep -E '^[_0-9a-zA-Z][-._0-9a-zA-Z]*$'
+}
+
+validate_port() {
+         echo ${@} | tr -d '\n\t\r' | grep -E '^[0-9]+$'
+}
+
+srv_lookup() {
+   ${DIGCMD} +short srv $SRV_HOST | sort -n -k1 |
+   while read line ; do
+      set $line ; PORT=$(validate_port $3) ; HOST=$(validate_host $4)
+      if [ -n "${HOST}" ] && [ -n "${PORT}" ]; then 
+         $PRINTCMD "\thost ${HOST%.}:${PORT}\n"
+      fi
+   done
+}
+
+naptr_lookup() {
+    ${DIGCMD} +short naptr ${REALM} | grep aaa+auth:radius.tls.tcp | sort -n -k1 |
+    while read line; do
+    set $line ; TYPE=$3 ; HOST=$6
+    if [ "$TYPE" = "\"s\"" -o "$TYPE" = "\"S\"" ]; then
+        SRV_HOST=${HOST%.}
+        srv_lookup
+    fi
+    done
+}
+
+if test -x "${DIGCMD}" ; then
+   SERVERS=$(naptr_lookup)
+else
+   echo "${0} requires \"dig\" command."
+   exit 1
+fi
+
+if test -n "${SERVERS}" ; then
+        $PRINTCMD "server dynamic_radsec.${REALM} {\n${SERVERS}\n\ttype TLS\n}\n"
+        exit 0
+fi
+
+exit 10				# No server found.

feeds/wlan-ap/opensync/files/bin/flash-firmware

@@ -24,7 +24,8 @@
 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-IMGFILE="$(ls ${1}.*)"
+# Get the most recent upgrade file available
+IMGFILE="$(ls -t1 ${1}.* | head -n 1)"
 
 if [ -z "$IMGFILE" ] || [ ! -f "$IMGFILE" ] ; then
   echo
@@ -34,11 +35,14 @@ fi
 
 # Set the current version as inactive before the upgrade
 FW_VERSION=`sed -n 's/FW_IMAGE_ACTIVE:\(.*\)/\1/p' < /usr/opensync/.versions`
+FW_BACKUP=$(uci get system.tip.inactivefw)
 uci set system.tip.inactivefw="${FW_VERSION}"
-uci commit
+uci commit system
 
 /sbin/sysupgrade $IMGFILE
 if [ "$?" != "0" ] ; then
+  uci set system.tip.inactivefw="${FW_BACKUP}"
+  uci commit system
   echo "$0: Sysupgrade failed."
   exit 1
 fi

feeds/wlan-ap/opensync/files/bin/lan-ssh-firewall

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ "$#" -ne 1 ]; then
+    echo "Illegal number of parameters"
+    exit 1
+fi
+
+action=$1
+
+[ "$action" = "enable" ] && [ ! -f /etc/ssh-flag ] && uci set firewall.lan_ssh_rule.target='REJECT'
+[ "$action" = "disable" ] && uci set firewall.lan_ssh_rule.target='ACCEPT'
+uci commit firewall
+/etc/init.d/firewall restart
+
+exit 0

feeds/wlan-ap/opensync/files/bin/wlan_ap_factory_reset.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+tar czf /sysupgrade.tgz /usr/opensync/certs/
+jffs2reset -r -y -k

feeds/wlan-ap/opensync/files/bin/wlan_ap_led_blink.sh

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+#Blink AP's LED
+/usr/opensync/tools/ovsh insert Node_Config module:="led" key:="led_blink" value:="on"
+

feeds/wlan-ap/opensync/files/bin/wlan_ap_led_blink_off.sh

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+#Turnoff blinking of AP's LED
+/usr/opensync/tools/ovsh insert Node_Config module:="led" key:="led_off" value:="off"
+

feeds/wlan-ap/opensync/files/bin/wlan_ap_redirector.sh

@@ -1,12 +1,52 @@
 #!/bin/sh
 
-if [ $# -ne 1 ] ; then
-	echo "Usage: $0 <redirector address>" >&2
-	exit 1
+AP_PRIVATE_KEY_FILE="/usr/opensync/certs/client_dec.key"
+AP_CERTIFICATE_FILE="/usr/opensync/certs/client.pem"
+AP_DEVICE_ID_FILE="/usr/opensync/certs/client_deviceid.txt"
+DIGICERT_API_URI="clientauth.one.digicert.com"
+
+if [ "$1" = "-h" ]; then
+  echo "Usage: $0 [redirector address]" >&2
+  exit 1
 fi
 
-redirector_addr=$1
+# Query DigiCert's API if redirector wasn't specified
+if [ -z "$1" ]; then
+  if [ ! -f "$AP_DEVICE_ID_FILE" ]; then
+      echo "Device ID file $AP_DEVICE_ID_FILE does not exist. Make sure to create it or specify the redirector address manually."
+      exit 1
+  fi
 
+  digicert_device_id=`cat ${AP_DEVICE_ID_FILE}`
+  device_data=`curl -s \
+    --retry 5 \
+    --show-error \
+    --key "${AP_PRIVATE_KEY_FILE}" \
+    --cert "${AP_CERTIFICATE_FILE}" \
+    "https://${DIGICERT_API_URI}/iot/api/v2/device/${digicert_device_id}"`
+
+  controller_url=`echo ${device_data} | jsonfilter -e '@.fields[@.name="Redirector"].value'`
+  if [ -z "$controller_url" ]; then
+    echo "No redirector found for this device"
+    exit 1
+  fi
+  controller_port=`echo ${controller_url} | cut -s -d ":" -f2)`
+  if [ -z "$controller_port" ]; then
+    redirector_addr="ssl:${controller_url}:6643"
+  else
+    redirector_addr="ssl:${controller_url}"
+  fi
+else
+  redirector_addr=$1
+fi
+
+# Enable lan ssh accsess
+lan-ssh-firewall disable
+
+echo "${redirector_addr}" > /usr/opensync/certs/redirector.txt
+/etc/init.d/uhttpd enable
+/etc/init.d/uhttpd start
 uci set system.tip.redirector="${redirector_addr}"
+uci set system.tip.deployed=0
 uci commit system
 /etc/init.d/opensync restart

feeds/wlan-ap/opensync/files/etc/hotplug.d/net/50-set-tx-rates

@@ -1,38 +0,0 @@
-#!/bin/sh
-
-[ "${ACTION}" = "add" ] || exit 0
-
-phy=$(cat /sys/class/net/${DEVICENAME}/phy80211/name)
-radio=$(uci get wireless.${DEVICENAME}.device)
-hwmode=$(uci get wireless.${radio}.hwmode)
-
-[ -z "$phy" -o -z "$radio" -o -z "$hwmode" ] && exit 0
-
-[ "${hwmode}" = "11a" ] && band=5 || band=2
-
-bcn_rate=$(uci get wireless.${DEVICENAME}.bcn_rate)
-mcast_rate=$(uci get wireless.${DEVICENAME}.mcast_rate)
-
-# ath10k rate-codes: 0x43 1M, 0x42 2M, 0x41 5.5M, 0x40 11M, 0x3 6M, 0x7 9M, 0x2 12M, 0x6 18M, 0x1 24M, 0x5 36M, 0x0 48M, 0x4 54M, 0xFF default
-rate_codes="1:0x43 2:0x42 5.5:0x41 11:0x40 6:0x3 9:0x7 12:0x2 18:0x6 24:0x1 36:0x5 48:0x0 54:0x4"
-
-# Default codes
-beacon_code=0xFF
-mcast_code=0xFF
-
-for rate_code in $rate_codes ; do
-        rate="${rate_code%%:*}"
-        code="${rate_code##*:}"
-        if [ "${rate_code%%:*}" == "$bcn_rate" ] ; then
-                beacon_code="${rate_code##*:}"
-        fi
-        if [ "${rate_code%%:*}" == "$mcast_rate" ] ; then
-                mcast_code="${rate_code##*:}"
-        fi
-done
-
-# set rates
-logger -t hotplug "Set Tx rates for device ${DEVICENAME}"
-sleep 5
-echo "${DEVICENAME} beacon ${band} ${beacon_code}" > /sys/kernel/debug/ieee80211/${phy}/ath10k/set_rates
-echo "${DEVICENAME} mcast ${band} ${mcast_code}" > /sys/kernel/debug/ieee80211/${phy}/ath10k/set_rates

feeds/wlan-ap/opensync/files/etc/hotplug.d/net/90-set-tx-rates

@@ -0,0 +1,61 @@
+#!/bin/sh
+
+[ "${ACTION}" = "add" ] || exit 0
+
+phy=$(cat /sys/class/net/${DEVICENAME}/phy80211/name)
+radio=$(uci get wireless.${DEVICENAME}.device)
+hwmode=$(uci get wireless.${radio}.hwmode)
+
+[ -z "$phy" -o -z "$radio" -o -z "$hwmode" ] && exit 0
+
+[ "${hwmode}" = "11a" ] && band=5 || band=2
+
+bcn_rate=$(($(uci get wireless.${DEVICENAME}.bcn_rate)/10))
+mcast_rate=$(uci get wireless.${DEVICENAME}.mcast_rate)
+
+ATH10K_FILE="/sys/kernel/debug/ieee80211/${phy}/ath10k/set_rates"
+if [ -f "$ATH10K_FILE" ]; then
+# ath10k rate-codes: 0x43 1M, 0x42 2M, 0x41 5.5M, 0x40 11M, 0x3 6M, 0x7 9M, 0x2 12M, 0x6 18M, 0x1 24M, 0x5 36M, 0x0 48M, 0x4 54M, 0xFF default
+
+	rate_codes="1:0x43 2:0x42 5:0x41 11:0x40 6:0x3 9:0x7 12:0x2 18:0x6 24:0x1 36:0x5 48:0x0 54:0x4"
+	SET_RATES_PATH=${ATH10K_FILE}
+fi
+
+ATH11K_FILE="/sys/kernel/debug/ieee80211/${phy}/ath11k/set_rates"
+if [ -f "$ATH11K_FILE" ]; then
+# ath11k rate-codes: 0x10000103 1M, 0x10000102 2M, 0x10000101 5.5M, 0x10000100 11M, 0x10000003 6M, 0x10000007 9M, 0x10000002 12M, 0x10000006 18M, 0x10000001 24M, 0x10000005 36M, 0x10000000 48M, 0x10000004 54M
+
+	rate_codes="1:0x10000103 2:0x10000102 5:0x10000101 11:0x10000100 6:0x10000003 9:0x10000007 12:0x10000002 18:0x10000006 24:0x10000001 36:0x10000005 48:0x10000000 54:0x10000004"
+	SET_RATES_PATH=${ATH11K_FILE}
+fi
+
+# Default codes
+beacon_code=0xFF
+mcast_code=0xFF
+
+for rate_code in $rate_codes ; do
+        rate="${rate_code%%:*}"
+        code="${rate_code##*:}"
+        if [ "${rate_code%%:*}" == "$bcn_rate" ] ; then
+                beacon_code="${rate_code##*:}"
+        fi
+        if [ "${rate_code%%:*}" == "$mcast_rate" ] ; then
+                mcast_code="${rate_code##*:}"
+        fi
+done
+
+# set rates
+logger -t hotplug "Set Tx rates for device ${DEVICENAME}"
+sleep 20
+
+[ "${beacon_code}" = "0xFF" ] || {
+	echo "${DEVICENAME} beacon ${band} ${beacon_code}" > ${SET_RATES_PATH}
+
+	if [ -f "$ATH11K_FILE" ]; then
+		echo "${DEVICENAME} mgmt ${band} ${beacon_code}" > ${SET_RATES_PATH}
+	fi
+}
+
+[ "${mcast_code}" = "0xFF" ] || {
+	echo "${DEVICENAME} mcast ${band} ${mcast_code}" > ${SET_RATES_PATH}
+}

feeds/wlan-ap/opensync/files/etc/logrotate.d/ovsdb.conf

@@ -0,0 +1,10 @@
+/tmp/log/openvswitch/*.log {
+    daily
+    rotate 5
+    size 1M
+    compress
+    delaycompress
+    dateext
+    dateformat -%s
+    notifempty
+}

feeds/wlan-ap/opensync/files/usr/opensync/certs/ca.pem

@@ -0,0 +1,75 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

feeds/wlan-ap/opensync/patches/30-fix-ipv4-string-to-bytes-conversion

@@ -1,6 +1,6 @@
 --- a/src/lib/datapipeline/src/dppline.c
 +++ b/src/lib/datapipeline/src/dppline.c
-@@ -2147,9 +2147,10 @@ static void dppline_add_stat_events(Sts_
+@@ -2147,9 +2147,11 @@ static void dppline_add_stat_events(Sts_
  			ipe->timestamp_ms = cs_rec->ip_event->timestamp;
  
  			if (cs_rec->ip_event->ip_addr) {
@@ -10,11 +10,12 @@
 +				uint8_t ip[IPV4_BYTES_LEN] = {0};
 +				sscanf(cs_rec->ip_event->ip_addr, "%hhu.%hhu.%hhu.%hhu", &ip[0], &ip[1], &ip[2], &ip[3]);
 +				ipe->ip_addr.data = malloc(IPV4_BYTES_LEN);
++				memcpy(ipe->ip_addr.data, ip, IPV4_BYTES_LEN);
 +				ipe->ip_addr.len = IPV4_BYTES_LEN;
  				ipe->has_ip_addr = true;
  			}
  		}
-@@ -2224,10 +2225,10 @@ static void dppline_add_stat_events(Sts_
+@@ -2224,10 +2226,11 @@ static void dppline_add_stat_events(Sts_
  			}
  
  			if (cs_rec->connect_event->ip_addr) {
@@ -25,6 +26,7 @@
 +				uint8_t ip[IPV4_BYTES_LEN] = {0};
 +				sscanf(cs_rec->connect_event->ip_addr, "%hhu.%hhu.%hhu.%hhu", &ip[0], &ip[1], &ip[2], &ip[3]);
 +				coe->ip_addr.data = malloc(IPV4_BYTES_LEN);
++				memcpy(coe->ip_addr.data, ip, IPV4_BYTES_LEN);
 +				coe->ip_addr.len = IPV4_BYTES_LEN;
  				coe->has_ip_addr = true;
  			}

feeds/wlan-ap/opensync/patches/33-add-apc-radsecproxy-schema.patch

@@ -0,0 +1,86 @@
+Index: opensync-2.0.5.0/interfaces/opensync.ovsschema
+===================================================================
+--- opensync-2.0.5.0.orig/interfaces/opensync.ovsschema
++++ opensync-2.0.5.0/interfaces/opensync.ovsschema
+@@ -9368,6 +9368,69 @@
+             }
+        },
+       "isRoot": true
++    },
++    "APC_Config": {
++      "columns": {
++        "enabled": {
++          "type": {
++            "key": {
++              "type": "boolean"
++            },
++            "min": 0,
++            "max": 1
++          }
++        }
++      },
++      "isRoot": true,
++      "maxRows": 1
++    },
++    "APC_State": {
++      "columns": {
++        "dr_addr": {
++          "type": {
++            "key": {
++              "type": "string"
++            }
++          }
++        },
++        "bdr_addr": {
++          "type": {
++            "key": {
++              "type": "string"
++            }
++          }
++        },
++        "enabled": {
++          "type": {
++            "key": {
++              "type": "boolean"
++            },
++            "min": 0,
++            "max": 1
++          }
++        },
++        "mode": {
++          "type": {
++            "key": {
++              "type": "string",
++              "enum": [
++                "set",
++                [
++                  "DR",
++                  "BDR",
++                  "OR",
++                  "WT",
++                  "NC"
++                ]
++              ]
++            },
++            "min": 0,
++            "max": 1
++          }
++        }
++      },
++      "isRoot": true,
++      "maxRows": 1
+     }
+   }
+ }
+Index: opensync-2.0.5.0/src/lib/schema/inc/schema_consts.h
+===================================================================
+--- opensync-2.0.5.0.orig/src/lib/schema/inc/schema_consts.h
++++ opensync-2.0.5.0/src/lib/schema/inc/schema_consts.h
+@@ -154,6 +154,7 @@ typedef enum {
+ #define SCHEMA_CONSTS_DISABLE_B_RATES	"disable_b_rates"
+ #define SCHEMA_CONSTS_IEEE80211k	"ieee80211k"
+ #define SCHEMA_CONSTS_DYNAMIC_VLAN	"dynamic_vlan"
++#define SCHEMA_CONSTS_RADPROXY	"radproxy"
+ 
+ /* radio Custom options */
+ #define SCHEMA_CONSTS_LOCAL_PWR_CONSTRAINT "local_pwr_constraint"

feeds/wlan-ap/opensync/patches/33-add-new-manufacturing-data.patch

@@ -0,0 +1,270 @@
+Index: opensync-2.0.5.0/interfaces/opensync.ovsschema
+===================================================================
+--- opensync-2.0.5.0.orig/interfaces/opensync.ovsschema
++++ opensync-2.0.5.0/interfaces/opensync.ovsschema
+@@ -199,6 +199,59 @@
+               "type": "integer"
+             }
+           }
++        },
++        "qr_code": {
++          "type": {
++            "key": "string",
++            "value": {
++               "type": "string",
++               "maxLength": 128
++            },
++            "min": 0,
++            "max": "unlimited"
++          }
++        },
++        "model_description": {
++          "type": {
++            "key": {
++              "type": "string"
++            }
++          }
++        },
++        "manufacturer_name": {
++          "type": {
++            "key": {
++              "type": "string"
++            }
++          }
++        },
++        "manufacturer_date": {
++          "type": {
++            "key": {
++              "type": "string"
++            }
++          }
++        },
++        "manufacturer_url": {
++          "type": {
++            "key": {
++              "type": "string"
++            }
++          }
++        },
++        "reference_design": {
++          "type": {
++            "key": {
++              "type": "string"
++            }
++          }
++        },
++        "certification_region": {
++          "type": {
++            "key": {
++              "type": "string"
++            }
++          }
+         }
+       },
+       "isRoot": true,
+Index: opensync-2.0.5.0/src/lib/target/inc/target.h
+===================================================================
+--- opensync-2.0.5.0.orig/src/lib/target/inc/target.h
++++ opensync-2.0.5.0/src/lib/target/inc/target.h
+@@ -332,6 +332,115 @@ bool target_hw_revision_get(void *buff,
+  */
+ bool target_platform_version_get(void *buff, size_t buffsz);
+ 
++/**
++ * @brief Return device model revision
++ *
++ * This function provides a null terminated byte string containing the
++ * model revision. The model revision is a part of AWLAN_Node table.
++ *
++ * @param buff   pointer to a string buffer
++ * @param buffsz size of string buffer
++ * @return true on success
++ */
++bool target_model_revision_get(void *buff, size_t buffsz);
++
++/**
++ * @brief Return device model description
++ *
++ * This function provides a null terminated byte string containing the
++ * model description. The model description is a part of AWLAN_Node table.
++ *
++ * @param buff   pointer to a string buffer
++ * @param buffsz size of string buffer
++ * @return true on success
++ */
++bool target_model_description_get(void *buff, size_t buffsz);
++
++/**
++ * @brief Return device manufacturer name
++ *
++ * This function provides a null terminated byte string containing the
++ * manufacturer name. The manufacturer name is a part of AWLAN_Node table.
++ *
++ * @param buff   pointer to a string buffer
++ * @param buffsz size of string buffer
++ * @return true on success
++ */
++bool target_manuf_name_get(void *buff, size_t buffsz);
++
++/**
++ * @brief Return device manufacturer date
++ *
++ * This function provides a null terminated byte string containing the
++ * manufacturer date. The manufacturer date is a part of AWLAN_Node table.
++ *
++ * @param buff   pointer to a string buffer
++ * @param buffsz size of string buffer
++ * @return true on success
++ */
++bool target_manuf_date_get(void *buff, size_t buffsz);
++
++/**
++ * @brief Return device manufacturer url
++ *
++ * This function provides a null terminated byte string containing the
++ * manufacturer url. The manufacturer url is a part of AWLAN_Node table.
++ *
++ * @param buff   pointer to a string buffer
++ * @param buffsz size of string buffer
++ * @return true on success
++ */
++bool target_manuf_url_get(void *buff, size_t buffsz);
++
++/**
++ * @brief Return device manufacturer name abbreviation
++ *
++ * This function provides a null terminated byte string containing the
++ * manufacturer name abbreviation. This is one of the pieces that form
++ * the QR code entry which is a part of AWLAN_Node table.
++ *
++ * @param buff   pointer to a string buffer
++ * @param buffsz size of string buffer
++ * @return true on success
++ */
++bool target_manuf_abbr_get(void *buff, size_t buffsz);
++
++/**
++ * @brief Return device reference design
++ *
++ * This function provides a null terminated byte string containing the
++ * reference design. The reference design is a part of AWLAN_Node table.
++ *
++ * @param buff   pointer to a string buffer
++ * @param buffsz size of string buffer
++ * @return true on success
++ */
++bool target_ref_design_get(void *buff, size_t buffsz);
++
++/**
++ * @brief Return device certification region
++ *
++ * This function provides a null terminated byte string containing the
++ * certification region. The certification region is a part of AWLAN_Node table.
++ *
++ * @param buff   pointer to a string buffer
++ * @param buffsz size of string buffer
++ * @return true on success
++ */
++bool target_cert_region_get(void *buff, size_t buffsz);
++
++/**
++ * @brief Return device mac address
++ *
++ * This function provides a null terminated byte string containing the
++ * mac address. The mac address is a part of AWLAN_Node table.
++ *
++ * @param buff   pointer to a string buffer
++ * @param buffsz size of string buffer
++ * @return true on success
++ */
++bool target_mac_addr_get(void *buff, size_t buffsz);
++
+ /// @} LIB_TARGET_ENTITY
+ 
+ /// @defgroup LIB_TARGET_MAP Interface Mapping API
+Index: opensync-2.0.5.0/src/dm/src/dm_ovsdb.c
+===================================================================
+--- opensync-2.0.5.0.orig/src/dm/src/dm_ovsdb.c
++++ opensync-2.0.5.0/src/dm/src/dm_ovsdb.c
+@@ -326,7 +326,7 @@ void fill_entity_data(struct schema_AWLA
+         s_awlan_node->sku_number_exists = true;
+     }
+ 
+-    if (true == target_hw_revision_get(buff, sizeof(buff)))
++    if (true == target_model_revision_get(buff, sizeof(buff)))
+     {
+         STRSCPY(s_awlan_node->revision, buff);
+     }
+@@ -359,6 +359,58 @@ void fill_entity_data(struct schema_AWLA
+     }
+     s_awlan_node->model_exists = true;
+ 
++    if (true == target_model_description_get(buff, sizeof(buff)))
++    {
++        STRSCPY(s_awlan_node->model_description, buff);
++        s_awlan_node->model_description_exists = true;
++    }
++
++    if (true == target_manuf_name_get(buff, sizeof(buff)))
++    {
++        STRSCPY(s_awlan_node->manufacturer_name, buff);
++        s_awlan_node->manufacturer_name_exists = true;
++    }
++
++    if (true == target_manuf_date_get(buff, sizeof(buff)))
++    {
++        STRSCPY(s_awlan_node->manufacturer_date, buff);
++        s_awlan_node->manufacturer_date_exists = true;
++    }
++
++    if (true == target_manuf_url_get(buff, sizeof(buff)))
++    {
++        STRSCPY(s_awlan_node->manufacturer_url, buff);
++        s_awlan_node->manufacturer_url_exists = true;
++    }
++
++    if (true == target_ref_design_get(buff, sizeof(buff)))
++    {
++        STRSCPY(s_awlan_node->reference_design, buff);
++        s_awlan_node->reference_design_exists = true;
++    }
++
++    if (true == target_cert_region_get(buff, sizeof(buff)))
++    {
++        STRSCPY(s_awlan_node->certification_region, buff);
++        s_awlan_node->certification_region_exists = true;
++    }
++
++    if (true == target_mac_addr_get(buff, sizeof(buff)))
++    {
++        STRSCPY(s_awlan_node->id, buff);
++        s_awlan_node->id_exists = true;
++    }
++
++    SCHEMA_KEY_VAL_APPEND(s_awlan_node->qr_code, "DT", "AP");
++    SCHEMA_KEY_VAL_APPEND(s_awlan_node->qr_code, "DM", s_awlan_node->id);
++    if (true == target_manuf_abbr_get(buff, sizeof(buff)))
++    {
++    	SCHEMA_KEY_VAL_APPEND(s_awlan_node->qr_code, "VN", buff);
++    }
++    SCHEMA_KEY_VAL_APPEND(s_awlan_node->qr_code, "SN", s_awlan_node->serial_number);
++    SCHEMA_KEY_VAL_APPEND(s_awlan_node->qr_code, "MN", s_awlan_node->model);
++    SCHEMA_KEY_VAL_APPEND(s_awlan_node->qr_code, "HW", s_awlan_node->revision);
++
+     LOG(NOTICE, "Device entity {serial=%s id=%s version=%s platform=%s sku=%s}",
+             s_awlan_node->serial_number,
+             s_awlan_node->id,
+@@ -422,6 +474,13 @@ bool act_update_entity (void)
+                                  "sku_number",
+                                  "upgrade_status",
+                                  "upgrade_timer",
++                                 "qr_code",
++                                 "model_description",
++                                 "manufacturer_name",
++                                 "manufacturer_date",
++                                 "manufacturer_url",
++                                 "reference_design",
++                                 "certification_region",
+                                  NULL)
+                              );
+ 

feeds/wlan-ap/opensync/patches/34-radsec-schema-consts.patch

@@ -0,0 +1,149 @@
+--- a/interfaces/opensync.ovsschema
++++ b/interfaces/opensync.ovsschema
+@@ -9493,6 +9493,146 @@
+       },
+       "isRoot": true,
+       "maxRows": 1
++    },
++    "Radius_Proxy_Config": {
++        "columns": {
++            "radius_config_name": {
++                "type": {
++                "key": {
++                  "type": "string"
++                },
++                "min": 1,
++                "max": 1
++              }
++            },
++            "radsec": {
++                "type": {
++                "key": {
++                  "type": "boolean"
++                },
++                "min": 1,
++                "max": 1
++              }
++            },
++            "auto_discover": {
++                "type": {
++                "key": {
++                  "type": "boolean"
++                },
++                "min": 1,
++                "max": 1
++              }
++            },
++            "server": {
++                "type": {
++                "key": {
++                  "type": "string"
++                },
++                "min": 1,
++                "max": 1
++              }
++            },
++            "port": {
++              "type": {
++                "key": {
++                  "type": "integer"
++                },
++                "min": 1,
++                "max": 1
++              }
++            },
++            "secret": {
++                "type": {
++                "key": {
++                  "type": "string"
++                },
++                "min": 1,
++                "max": 1
++              }
++            },
++            "acct_server": {
++                "type": {
++                "key": {
++                  "type": "string"
++                },
++                "min": 0,
++                "max": 1
++              }
++            },
++            "acct_port": {
++              "type": {
++                "key": {
++                  "type": "integer"
++                },
++                "min": 0,
++                "max": 1
++              }
++            },
++            "acct_secret": {
++                "type": {
++                "key": {
++                  "type": "string"
++                },
++                "min": 0,
++                "max": 1
++              }
++            },
++            "ca_cert": {
++                "type": {
++                    "key": {
++                        "type": "string",
++                        "minLength": 1,
++                        "maxLength": 256
++                    },
++                    "min": 0,
++                    "max": 1
++                }
++              },
++            "client_cert": {
++                "type": {
++                    "key": {
++                        "type": "string",
++                        "minLength": 1,
++                        "maxLength": 256
++                    },
++                    "min": 0,
++                    "max": 1
++                }
++              },
++            "client_key": {
++                "type": {
++                    "key": {
++                        "type": "string",
++                        "minLength": 1,
++                        "maxLength": 256
++                    },
++                    "min": 0,
++                    "max": 1
++                }
++              },
++            "passphrase": {
++                "type": {
++                    "key": {
++                        "type": "string",
++                        "minLength": 0,
++                        "maxLength": 128
++                    },
++                    "min": 0,
++                    "max": 1
++                }
++              },
++            "realm": {
++              "type": {
++                "key": {
++                  "type": "string",
++                  "maxLength": 256
++                },
++                "min": 0,
++                "max": 16
++              }
++            }
++         },
++        "isRoot": true
+     }
+   }
+ }

feeds/wlan-ap/opensync/patches/35-add-proxy-arp-schema.patch

@@ -0,0 +1,13 @@
+Index: opensync-2.0.5.0/src/lib/schema/inc/schema_consts.h
+===================================================================
+--- opensync-2.0.5.0.orig/src/lib/schema/inc/schema_consts.h
++++ opensync-2.0.5.0/src/lib/schema/inc/schema_consts.h
+@@ -155,6 +155,8 @@ typedef enum {
+ #define SCHEMA_CONSTS_IEEE80211k	"ieee80211k"
+ #define SCHEMA_CONSTS_DYNAMIC_VLAN	"dynamic_vlan"
+ #define SCHEMA_CONSTS_RADPROXY	"radproxy"
++#define SCHEMA_CONSTS_PROXY_ARP		"proxy_arp"
++#define SCHEMA_CONSTS_MCAST_TO_UCAST	"mcast_to_ucast"
+ 
+ /* radio Custom options */
+ #define SCHEMA_CONSTS_LOCAL_PWR_CONSTRAINT "local_pwr_constraint"

feeds/wlan-ap/opensync/patches/35-channel-switch-fix.patch

@@ -0,0 +1,34 @@
+Index: opensync-2.0.5.0/src/lib/datapipeline/src/dppline.c
+===================================================================
+--- opensync-2.0.5.0.orig/src/lib/datapipeline/src/dppline.c
++++ opensync-2.0.5.0/src/lib/datapipeline/src/dppline.c
+@@ -652,8 +652,8 @@ static bool dppline_copysts(dppline_stat
+ 			dst->u.events.client_event_qty++;
+ 		}
+ 
+-		size = dst->u.events.client_event_qty * sizeof(dpp_event_record_session_t);
+-		dst->u.events.client_event_list = calloc(1, size);
++		int size_cl = dst->u.events.client_event_qty * sizeof(dpp_event_record_session_t);
++		dst->u.events.client_event_list = calloc(1, size_cl);
+ 		int count = 0;
+ 		ds_dlist_foreach(&report_data->client_event_list, result)
+ 		{
+@@ -671,8 +671,8 @@ static bool dppline_copysts(dppline_stat
+ 			dst->u.events.channel_event_qty++;
+ 		}
+ 
+-		size = dst->u.events.channel_event_qty * sizeof(dpp_event_record_channel_switch_t);
+-		dst->u.events.channel_event_list = calloc(1, size);
++		int size_ch = dst->u.events.channel_event_qty * sizeof(dpp_event_record_channel_switch_t);
++		dst->u.events.channel_event_list = calloc(1, size_ch);
+ 		ds_dlist_foreach(&report_data->channel_switch_list, channel_result)
+ 		{
+ 			assert(count < (int)dst->u.events.channel_event_qty);
+@@ -680,6 +680,7 @@ static bool dppline_copysts(dppline_stat
+ 			       sizeof(dpp_event_record_channel_switch_t));
+ 			count++;
+ 		}
++		size = size_cl + size_ch;
+ 
+ 	} break;
+ 

feeds/wlan-ap/opensync/patches/36-add-channel-hop-config.patch

@@ -0,0 +1,66 @@
+Index: opensync-2.0.5.0/interfaces/opensync.ovsschema
+===================================================================
+--- opensync-2.0.5.0.orig/interfaces/opensync.ovsschema
++++ opensync-2.0.5.0/interfaces/opensync.ovsschema
+@@ -8982,6 +8982,61 @@
+                     "min": 0,
+                     "max": 1
+                 }
++            },
++            "noise_floor_thresh": {
++                "type": {
++                    "key": {
++                        "type": "integer",
++                        "minInteger": -90,
++                        "maxInteger": -10
++                    },
++                    "min": 0,
++                    "max": 1
++                }
++            },
++            "noise_floor_time": {
++                "type": {
++                    "key": {
++                        "type": "integer",
++                        "minInteger": 60,
++                        "maxInteger": 600
++                    },
++                    "min": 0,
++                    "max": 1
++                }
++            },
++            "non_wifi_thresh": {
++                "type": {
++                    "key": {
++                        "type": "integer",
++                        "minInteger": 0,
++                        "maxInteger": 100
++                    },
++                    "min": 0,
++                    "max": 1
++                }
++            },
++            "non_wifi_time": {
++                "type": {
++                    "key": {
++                        "type": "integer",
++                        "minInteger": 60,
++                        "maxInteger": 600
++                    },
++                    "min": 0,
++                    "max": 1
++                }
++            },
++            "obss_hop_mode": {
++                "type": {
++                    "key": {
++                        "type": "integer",
++                        "minInteger": 1,
++                        "maxInteger": 2
++                    },
++                    "min": 0,
++                    "max": 1
++                }
+             }
+         },
+         "isRoot": true

feeds/wlan-ap/opensync/patches/37-add-auto-hw_mode.patch

@@ -0,0 +1,12 @@
+--- a/interfaces/opensync.ovsschema
++++ b/interfaces/opensync.ovsschema
+@@ -1357,7 +1357,8 @@
+                   "11n",
+                   "11ab",
+                   "11ac",
+-                  "11ax"
++                  "11ax",
++                  "auto"
+                 ]
+               ]
+             },

feeds/wlan-ap/opensync/patches/37-add-channel-max-power.patch

@@ -0,0 +1,19 @@
+--- a/interfaces/opensync.ovsschema
++++ b/interfaces/opensync.ovsschema
+@@ -1880,7 +1880,15 @@
+             "min": 0,
+             "max": "unlimited"
+           }
+-        }
++        },
++        "channel_max_power": {
++          "type": {
++            "key": "integer",
++            "value": "integer",
++            "min": 0,
++            "max": "unlimited"
++          }
++        }
+       },
+       "isRoot": true,
+       "maxRows": 256

feeds/wlan-ap/opensync/patches/37-cpu-utilization.patch

@@ -0,0 +1,13 @@
+Index: opensync-2.0.5.0/src/lib/target/src/target_linux.c
+===================================================================
+--- opensync-2.0.5.0.orig/src/lib/target/src/target_linux.c
++++ opensync-2.0.5.0/src/lib/target/src/target_linux.c
+@@ -249,7 +249,7 @@ static bool linux_device_cpuutil_get(dpp
+         }
+ 
+         /* Calculate percentage and round */
+-        busy = (1.0 - ((double)diff.hz_idle / (double)hz_total_diff)) * 100.0;
++       	busy = (100.0 - (((double)diff.hz_idle *100.0) / (double)hz_total_diff));
+ 
+         cpuutil->cpu_util = (uint32_t) (busy + 0.5);
+ 

feeds/wlan-ap/opensync/patches/38-correcting-scan-type-max-count.patch

@@ -0,0 +1,16 @@
+Index: opensync-2.0.5.0/src/lib/datapipeline/inc/dpp_types.h
+===================================================================
+--- opensync-2.0.5.0.orig/src/lib/datapipeline/inc/dpp_types.h
++++ opensync-2.0.5.0/src/lib/datapipeline/inc/dpp_types.h
+@@ -148,10 +148,9 @@ typedef enum
+     RADIO_SCAN_TYPE_FULL,
+     RADIO_SCAN_TYPE_ONCHAN,
+     RADIO_SCAN_TYPE_OFFCHAN,
++    RADIO_SCAN_MAX_TYPE_QTY
+ } radio_scan_type_t;
+ 
+-#define RADIO_SCAN_MAX_TYPE_QTY       3
+-
+ typedef enum
+ {
+     RADIO_QUEUE_TYPE_VI = 0,

feeds/wlan-ap/opensync/patches/39-allow-upgrade-retry.patch

@@ -0,0 +1,12 @@
+--- a/src/um/src/um_ovsdb.c
++++ b/src/um/src/um_ovsdb.c
+@@ -356,7 +356,8 @@ static void callback_AWLAN_Node(
+                 //TODO Is there something that needs to be done here?
+             }
+ 
+-            if(awlan_node->upgrade_timer_changed){
++            if(awlan_node->upgrade_timer_changed
++                || ((awlan_node->firmware_url_changed) && (strlen(awlan_node->firmware_url) > 0))) {
+                 if (awlan_node->upgrade_timer > 0)
+                 {
+                     /* if there is active timer, stop it to set new value   */

feeds/wlan-ap/opensync/patches/40-reboot-factory-reset-status-codes.patch

@@ -0,0 +1,32 @@
+--- a/src/um/inc/um.h
++++ b/src/um/inc/um.h
+@@ -32,6 +32,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBI
+ 
+ #define UM_STS_FW_DL_START     (10)    /* FW download started                      */
+ #define UM_STS_FW_DL_END       (11)    /* FW download successfully completed       */
++#define UM_STS_RB_END          (12)    /* Reboot has been started                  */
++#define UM_STS_FR_END          (13)    /* Factory reset has been started           */
+ #define UM_STS_FW_WR_START     (20)    /* FW write on alt partition started        */
+ #define UM_STS_FW_WR_END       (21)    /* FW image write successfully completed    */
+ #define UM_STS_FW_BC_START     (30)    /* Bootconfig partition update started      */
+--- a/src/um/src/um_ovsdb.c
++++ b/src/um/src/um_ovsdb.c
+@@ -248,8 +248,16 @@ static void cb_upg(const osp_upg_op_t op
+         case OSP_UPG_DL:
+             if (status == OSP_UPG_OK)
+             {
+-                LOG(INFO, "Download successfully completed");
+-                ret_status = UM_STS_FW_DL_END;
++                if (!strcmp(upg_url, "reboot")) {
++                    LOG(INFO, "Reboot successfully initiated");
++                    ret_status = UM_STS_RB_END;
++                } else if (!strcmp(upg_url, "factory"))  {
++                    LOG(INFO, "Factory reset successfully initiated");
++                    ret_status = UM_STS_FR_END;
++                } else {
++                    LOG(INFO, "Download successfully completed");
++                    ret_status = UM_STS_FW_DL_END;
++                }
+             }
+             else
+             {

feeds/wlan-ap/opensync/patches/41-log-supression.patch

@@ -0,0 +1,11 @@
+--- a/src/lib/ovsdb/src/ovsdb_table.c
++++ b/src/lib/ovsdb/src/ovsdb_table.c
+@@ -560,7 +560,7 @@ void ovsdb_table_update_cb(ovsdb_update_
+         return;
+     }
+ 
+-    LOG(INFO, "MON upd: %s table: %s row: %s", typestr, table->table_name, mon_uuid );
++    LOG(TRACE, "MON upd: %s table: %s row: %s", typestr, table->table_name, mon_uuid );
+ 
+     if (LOG_SEVERITY_TRACE <= log_module_severity_get(MODULE_ID))
+     {

feeds/wlan-ap/opensync/src/platform/openwrt/rootfs/common/etc/init.d/opensync

@@ -37,6 +37,23 @@ start_service() {
     echo "Setting certificates"
     mkdir -p ${CERTS_DEST_PATH}
     cp ${CERTS_SRC_PATH}/* ${CERTS_DEST_PATH}/
+    echo "Checking Redirector"
+    redirector=$(uci get system.tip.redirector)
+    if [ -z "$redirector" ]; then
+        [[ -f /usr/opensync/certs/redirector.txt ]] && saved_redirector=$(cat /usr/opensync/certs/redirector.txt | tr -d '\r\n')
+        logger -t opensync "Contacting DigiCert for redirector address"
+        wlan_ap_redirector.sh
+        new_redirector=$(uci get system.tip.redirector)
+        if [ -z "$new_redirector" && -n "$saved_redirector" ]; then
+            logger -t opensync "No response from DigiCert, using saved redirector address ${saved_redirector}"
+            wlan_ap_redirector.sh ${saved_redirector}
+        else
+            logger -t opensync "DigiCert returned redirector address ${new_redirector}"
+        fi
+    else
+        logger -t opensync "Using existing redirector address ${redirector}"
+        [[ -f /usr/opensync/certs/redirector.txt ]] || echo "${redirector}" > /usr/opensync/certs/redirector.txt
+    fi
     echo "Starting OpenSync"
     procd_set_param command ${PROG}
     procd_close_instance

feeds/wlan-ap/opensync/src/platform/openwrt/src/command/src/cmd_tcpdump.c

@@ -215,6 +215,7 @@ pid_t cmd_handler_tcpdump_wifi(struct task *task)
 	char *argv[] = { "/usr/sbin/tcpdump", "-c", "1000", "-G", duration, "-W", "1", "-w", pcap, "-i", phy, NULL };
 	char iw[128];
 	pid_t pid;
+	int ret = 0;
 
 	task->arg = SCHEMA_KEY_VAL(task->conf.payload, "wifi");
 	if (!task->arg) {
@@ -225,15 +226,23 @@ pid_t cmd_handler_tcpdump_wifi(struct task *task)
 
 	blob_buf_init(&b, 0);
 	uci = uci_alloc_context();
-	uci_load(uci, "wireless", &p);
-	s = uci_lookup_section(uci, p, task->arg);
-        if (!s) {
-		task_status(task, TASK_FAILED, "unknown wifi");
+
+	ret = uci_load(uci, "wireless", &p);
+	if (ret) {
+		LOGE("%s: uci_load() failed with rc %d", __func__, ret);
 		uci_free_context(uci);
-                return -1;
+		return -1;
+	}
+	s = uci_lookup_section(uci, p, task->arg);
+	if (!s) {
+		task_status(task, TASK_FAILED, "unknown wifi");
+		uci_unload(uci, p);
+		uci_free_context(uci);
+		return -1;
 	}
 
-        uci_to_blob(&b, s, &phy_param);
+	uci_to_blob(&b, s, &phy_param);
+	uci_unload(uci, p);
 	uci_free_context(uci);
 
 	blobmsg_parse(phy_policy, __PHY_ATTR_MAX, tb, blob_data(b.head), blob_len(b.head));

feeds/wlan-ap/opensync/src/platform/openwrt/src/command/src/node_config.c

@@ -1,6 +1,10 @@
 /* SPDX-License-Identifier: BSD-3-Clause */
-
 #include <string.h>
+#include <glob.h>
+#include <linux/limits.h>
+#include <libgen.h>
+#include <stdio.h>
+#include <libubox/blobmsg_json.h>
 
 #include "uci.h"
 #include "command.h"
@@ -88,9 +92,14 @@ static void syslog_state(int config)
 	struct uci_element *e = NULL;
 	struct uci_section *s = NULL;
 	char val[128];
+	int ret = 0;
 
 	blob_buf_init(&b, 0);
-	uci_load(uci, "system", &system);
+	ret = uci_load(uci, "system", &system);
+	if (ret) {
+		LOGE("%s: uci_load() failed with rc %d", __func__, ret);
+		return;
+	}
 	uci_foreach_element(&system->sections, e) {
 		s = uci_to_section(e);
 		if (!strcmp(s->type, "system"))
@@ -151,7 +160,6 @@ static void syslog_handler(int type,
 	blob_to_uci_section(uci, "system", "@system[-1]", "system",
 			    b.head, &log_param, NULL);
 	uci_commit_all(uci);
-	system("/sbin/reload_config");
 	if (del)
 		node_state_del("syslog");
 	else
@@ -179,14 +187,20 @@ static void ntp_state(int config)
         struct uci_section *s;
 	struct blob_attr *cur = NULL;
 	char val[128] = {};
-	int first = 1, rem = 0;
+	int first = 1, rem = 0, ret = 0;
 
 	blob_buf_init(&b, 0);
-	uci_load(uci, "system", &p);
+	ret = uci_load(uci, "system", &p);
+	if (ret) {
+		LOGE("%s: uci_load() failed with rc %d", __func__, ret);
+		return;
+	}
 
 	s = uci_lookup_section(uci, p, "ntp");
-	if (!s)
+	if (!s) {
+		uci_unload(uci, p);
 		return;
+	}
 
 	uci_to_blob(&b, s, &ntp_param);
 	blobmsg_parse(ntp_policy, __NTP_ATTR_MAX, tb, blob_data(b.head), blob_len(b.head));
@@ -238,10 +252,205 @@ static void ntp_handler(int type,
 	blob_to_uci_section(uci, "system", "ntp", "timeserver",
 			    b.head, &ntp_param, NULL);
 	uci_commit_all(uci);
-	system("/sbin/reload_config");
 	ntp_state(0);
 }
 
+enum {
+	LED_ATTR_SYSFS,
+	LED_ATTR_TRIGGER,
+	LED_ATTR_DELAYON,
+	LED_ATTR_DELAYOFF,
+	LED_ATTR_VALUE,
+	LED_ATTR_KEY,
+	__LED_ATTR_MAX,
+};
+
+static const struct blobmsg_policy led_policy[__LED_ATTR_MAX] = {
+	[LED_ATTR_SYSFS] = { .name = "sysfs", .type = BLOBMSG_TYPE_STRING },
+	[LED_ATTR_TRIGGER] = { .name = "trigger", .type = BLOBMSG_TYPE_STRING },
+	[LED_ATTR_DELAYON] = { .name = "delayon", .type = BLOBMSG_TYPE_STRING},
+	[LED_ATTR_DELAYOFF] = { .name = "delayoff", .type = BLOBMSG_TYPE_STRING},
+	[LED_ATTR_VALUE] = { .name = "value", .type = BLOBMSG_TYPE_STRING},
+	[LED_ATTR_KEY] = { .name = "key", .type = BLOBMSG_TYPE_STRING},
+};
+
+static const struct uci_blob_param_list led_param = {
+	.n_params = __LED_ATTR_MAX,
+	.params = led_policy,
+};
+
+static char led[][8]={"lan", "wan", "eth", "wifi2", "wifi5", "wlan2g", "wlan5g", "power","eth0",
+			  "status", "eth1", "wifi2g", "eth2", "wifi5g", "plug", "world", "usb", "linksys", "wps", "bt"};
+
+static struct blob_buf b;
+#define DEFAULT_BOARD_JSON		"/etc/board.json"
+static struct blob_attr *board_info;
+
+static void led_state(int config)
+{
+	struct blob_attr *tb[__LED_ATTR_MAX] = { };
+	struct uci_package *system;
+	struct uci_section *s = NULL;
+	struct uci_element *e = NULL;
+	char val[8];
+	char key[16];
+	blob_buf_init(&b, 0);
+	uci_load(uci, "system", &system);
+	uci_foreach_element(&system->sections, e) {
+		s = uci_to_section(e);
+		if (!strcmp(s->type, "led")) {
+			uci_to_blob(&b, s, &led_param);
+			blobmsg_parse(led_policy, __LED_ATTR_MAX, tb, blob_data(b.head), blob_len(b.head));
+			if(tb[LED_ATTR_KEY])
+				strcpy(key, blobmsg_get_string(tb[LED_ATTR_KEY]));
+			if(tb[LED_ATTR_VALUE])
+				strcpy(val, blobmsg_get_string(tb[LED_ATTR_VALUE]));
+			break;
+		}
+		s = NULL;
+	}
+	if (!s)
+		goto out;
+	if (config)
+		node_config_set("led", key, val);
+	node_state_set("led", key, val);
+out:
+	uci_unload(uci, system);
+}
+
+int available_led_check(char *led_name)
+{
+	unsigned int i;
+	for (i = 0; i < ARRAY_SIZE(led); i++) {
+		if(!strcmp(led_name,led[i])) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static void set_led_config(char *trigger_name, char *key, char* value, char* led_string, char* led_section)
+{
+	blob_buf_init(&b, 0);
+	blobmsg_add_string(&b, "sysfs", led_string);
+	blobmsg_add_string(&b, "trigger", trigger_name);
+	blobmsg_add_string(&b, "value", value);
+	blobmsg_add_string(&b, "key", key);
+	blob_to_uci_section(uci, "system", led_section, "led", b.head, &led_param, NULL);
+	return;
+}
+
+static struct blob_attr* config_find_blobmsg_attr(struct blob_attr *attr, const char *name, int type)
+{
+	struct blobmsg_policy policy = { .name = name, .type = type };
+	struct blob_attr *cur;
+
+	blobmsg_parse(&policy, 1, &cur, blobmsg_data(attr), blobmsg_len(attr));
+
+	return cur;
+}
+
+static char* get_phy_map_led_info(char* wifi)
+{
+	struct blob_attr *cur;
+
+	blob_buf_init(&b, 0);
+
+	if (!blobmsg_add_json_from_file(&b, DEFAULT_BOARD_JSON)) {
+		return NULL;
+	}
+	if (board_info != NULL) {
+		free(board_info);
+		board_info = NULL;
+	}
+	cur = config_find_blobmsg_attr(b.head, "led", BLOBMSG_TYPE_TABLE);
+	if (!cur) {
+		LOGD("Failed to find led objet in board.json file");
+		return NULL;
+	}
+	board_info = blob_memdup(cur);
+	if (!board_info)
+		return NULL;
+	cur = config_find_blobmsg_attr(board_info, wifi, BLOBMSG_TYPE_TABLE);
+	if (!cur) {
+		LOGD("Failed to find %s objet in board.json file", wifi);
+		return NULL;
+	}
+	cur = config_find_blobmsg_attr(cur, "trigger", BLOBMSG_TYPE_STRING);
+	if (!cur) {
+		LOGD("Failed to find trigger in board.json file");
+		return NULL;
+	}
+	return blobmsg_get_string(cur);
+}
+
+static void get_led_info_from_sys_config(char* key, char* value)
+{
+	char led_string[32];
+	char ap_name[16];
+	char color[16];
+	char led_section[16];
+	char led_name_final[24];
+	char sys[8];
+	char class[8];
+	char leds[8];
+	char sysled[PATH_MAX];
+	glob_t gl;
+	unsigned int i;
+
+	if (glob("/sys/class/leds/*", GLOB_NOSORT, NULL, &gl))
+		return;
+	for (i = 0; i < gl.gl_pathc; i++) {
+		strncpy(sysled, gl.gl_pathv[i], sizeof(sysled));
+		sscanf(sysled,"/%[^/]/%[^/]/%[^/]/%s", sys, class, leds, led_string);
+		sscanf(led_string,"%[^:]:%[^:]:%s",ap_name, color, led_section);
+		if(available_led_check(led_section)) {
+			snprintf(led_name_final, sizeof(led_name_final), "%s%s","led_",led_section);
+			if(!strcmp(key, "led_blink")) {
+				set_led_config("heartbeat", key, value, led_string, led_name_final);
+			}
+			else if(!strcmp(key, "led_off")) {
+				set_led_config("none", key, value, led_string, led_name_final);
+			}
+			else {
+				if(!strcmp(led_section, "wifi2g") || !strcmp(led_section, "wifi5g")) {
+					set_led_config(get_phy_map_led_info(led_section), key, value, led_string, led_name_final);
+				}
+				else
+					set_led_config("none", key, value, led_string, led_name_final);
+			}
+		}
+	}
+	globfree(&gl);
+	return;
+}
+
+static void led_handler(int type,
+			struct schema_Node_Config *old,
+			struct schema_Node_Config *conf)
+{
+	int del=1;
+	switch (type) {
+	case OVSDB_UPDATE_NEW:
+	case OVSDB_UPDATE_MODIFY:
+		if (!strcmp(conf->key, "led_blink") || !strcmp(conf->key, "led_off")) {
+			get_led_info_from_sys_config(conf->key, conf->value);
+			del=0;
+		}
+		break;
+	case OVSDB_UPDATE_DEL:
+		get_led_info_from_sys_config("led_state", "default");
+		break;
+	default:
+		LOGD("Invalid Command");
+	}
+	uci_commit_all(uci);
+	if(del)
+		node_state_del("led");
+	else
+		led_state(0);
+}
+
 static struct node_handler {
 	char *name;
 	void (*handler)(int type,
@@ -259,6 +468,11 @@ static struct node_handler {
 		.handler = ntp_handler,
 		.state = ntp_state,
 	},
+	{
+		.name = "led",
+		.handler = led_handler,
+		.state = led_state,
+	},
 };
 
 static void callback_Node_Config(ovsdb_update_monitor_t *mon,

feeds/wlan-ap/opensync/src/platform/openwrt/src/command/src/webserver.c

@@ -10,6 +10,13 @@
 static ovsdb_table_t table_Manager;
 static int done;
 
+
+static void disable_ssh() 
+{
+	LOGN("Disabling LAN ssh access");
+	system("lan-ssh-firewall enable");
+}
+
 static void stop_http(void *arg)
 {
 	LOGN("Stopping webserver");
@@ -17,6 +24,8 @@ static void stop_http(void *arg)
 	system("uci commit system");
 	system("/etc/init.d/uhttpd stop");
 	system("/etc/init.d/uhttpd disable");
+
+	disable_ssh();
 }
 
 static void callback_Manager(ovsdb_update_monitor_t *mon,

feeds/wlan-ap/opensync/src/platform/openwrt/src/command/unit.mk

@@ -54,7 +54,7 @@ UNIT_CFLAGS := -I$(UNIT_PATH)/inc
 UNIT_CFLAGS += -Isrc/lib/common/inc/
 UNIT_CFLAGS += -Isrc/lib/version/inc/
 
-UNIT_LDFLAGS += -lev -lubox -luci -lubus -lwebsocket
+UNIT_LDFLAGS += -lev -lubox -luci -lubus -lwebsocket -lblobmsg_json
 UNIT_LDFLAGS += -lrt
 
 UNIT_EXPORT_CFLAGS := $(UNIT_CFLAGS)

feeds/wlan-ap/opensync/src/platform/openwrt/src/lib/target/inc/captive.h

@@ -10,7 +10,7 @@ extern const struct schema_Wifi_VIF_Config *vconf;
 extern void vif_captive_portal_set (const struct schema_Wifi_VIF_Config *vconf, char *ifname);
 extern void vif_state_captive_portal_options_get(struct schema_Wifi_VIF_State *vstate);
 extern void captive_portal_init();
-extern void splash_page_logo(char* dest_file,char* src_url);
+extern void captive_portal_files_download(char* dest_file,char* src_url);
 extern void vif_dhcp_opennds_allowlist_set(const struct schema_Wifi_VIF_Config *vconf, char *ifname);
 extern void vif_state_dhcp_allowlist_get(struct schema_Wifi_VIF_State *vstate);
 

feeds/wlan-ap/opensync/src/platform/openwrt/src/lib/target/inc/fixup.h

@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+
+#ifndef _FIXUP_H__
+#define _FIXUP_H__
+
+struct vif_fixup {
+        struct avl_node avl;
+        char name[IF_NAMESIZE];
+        bool has_captive;
+};
+
+struct vif_fixup * vif_fixup_find(const char *name);
+void vif_fixup_del(char *ifname);
+
+
+bool vif_fixup_captive_enabled(void);
+bool vif_fixup_iface_captive_enabled(const char *ifname);
+void vif_fixup_set_iface_captive(const char *ifname, bool en);
+
+struct radio_fixup {
+        struct avl_node avl;
+        char rname[IF_NAMESIZE];
+        char hw_mode[8];
+};
+
+struct radio_fixup * radio_fixup_find(const char *name);
+void radio_fixup_del(char *ifname);
+void radio_fixup_set_hw_mode(const char *ifname, char *hw_mode);
+char *radio_fixup_get_hw_mode(const char *ifname);
+#endif

feeds/wlan-ap/opensync/src/platform/openwrt/src/lib/target/inc/phy.h

@@ -5,13 +5,14 @@
 
 extern int phy_from_path(char *path, char *phy);
 extern int phy_get_mac(char *phy, char *mac);
-extern int phy_find_hwmon(char *path, char *hwmon);
+extern int phy_find_hwmon(char *phy, char *hwmon, bool *DegreesNotMilliDegrees);
 extern int phy_get_tx_chainmask(const char *name);
 extern int phy_get_rx_chainmask(const char *name);
 extern int phy_get_tx_available_antenna(const char *name);
 extern int phy_get_rx_available_antenna(const char *name);
 extern int phy_get_max_tx_power(const char *name , int channel);
 extern int phy_get_channels(const char *name, int *channel);
+extern int phy_get_dfs_channels(const char *name, int *channel);
 extern int phy_get_channels_state(const char *name,
 			struct schema_Wifi_Radio_State *rstate);
 extern int phy_get_band(const char *name, char *band);