Merge pull request #489 from Telecominfraproject/main

Fixes for WIFI-11004

README.md

@@ -1,20 +1,83 @@
-# Setting up your build machine
+# OpenWiFi AP NOS
 
-Requires a recent linux installation. Older systems without python 3.7 will have trouble.  See this link for details: https://openwrt.org/docs/guide-developer/quickstart-build-images
+OpenWrt-based access point network operating system (AP NOS) for TIP OpenWiFi.
+Read more at [openwifi.tip.build](https://openwifi.tip.build/).
 
-Install build packages:  sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml.
+## Building
 
-# Doing a native build on Linux
+### Setting up your build machine
-First we need to clone and setup our tree. This will result in an openwrt/.
+
+Building requires a recent Linux installation. Older systems without Python 3.7
+will have trouble. See this guide for details:
+https://openwrt.org/docs/guide-developer/toolchain/beginners-build-guide
+
+Install build packages on Debian/Ubuntu (or see above guide for other systems):
 ```
-./setup.py --setup
+sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml
 ```
-Next we need to select the profile and base package selection. This setup will install the feeds, packages and generate the .config file.
+
+### Doing a native build on Linux
+
+Use `./build.sh <target>`, or follow the manual steps below:
+
+1. Clone and set up the tree. This will create an `openwrt/` directory.
+```shell
+./setup.py --setup    # for subsequent builds, use --rebase instead
 ```
+
+2. Select the profile and base package selection. This setup will install the
+   feeds and packages and generate the `.config` file.
+```shell
 cd openwrt
 ./scripts/gen_config.py linksys_ea8300
 ```
-Finally we can build the tree.
+
-```
+3. Build the tree (replace `-j 8` with the number of cores to use).
-make -j X V=s
+```shell
+make -j 8 V=s
 ```
+
+### Build output
+
+The build results are located in the `openwrt/bin/` directory:
+
+| Type             | Path                                                 |
+| ---------------- | ---------------------------------------------------- |
+| Firmware images  | `openwrt/bin/targets/<target>/<subtarget>/`          |
+| Kernel modules   | `openwrt/bin/targets/<target>/<subtarget>/packages/` |
+| Package binaries | `openwrt/bin/packages/<platform>/<feed>/`            |
+
+## Developer Notes
+
+### Branching model
+
+- `main` - Stable dev branch
+- `next` - Integration branch
+- `staging-*` - Feature/bug branches
+- `release/v#.#.#` - Release branches (*major.minor.patch*)
+
+### Repository structure
+
+Build files:
+- `Makefile` - Calls Docker environment per target
+- `dock-run.sh` - Dockerized build environment
+- `docker/Dockerfile` - Dockerfile for build image
+- `build.sh` - Build script
+- `setup.py` - Clone and set up the tree
+- `config.yml` - Specifies OpenWrt version and patches to apply
+
+Directories:
+- `feeds/` - OpenWiFi feeds
+- `patches/` - OpenWiFi patches applied during builds
+- `profiles/` - Per-target kernel configs, packages, and feeds
+    - [wifi-ax](profiles/wifi-ax.yml): Wi-Fi AX packages
+    - [ucentral-ap](profiles/ucentral-ap.yml): uCentral packages
+    - [x64_vm](profiles/x64_vm.yml): x86-64 VM image
+
+### uCentral packages
+
+AP-NOS packages implementing the uCentral protocol include the following
+repositories (refer to the [ucentral](feeds/ucentral/) feed for a full list):
+- ucentral-client: https://github.com/Telecominfraproject/wlan-ucentral-client
+- ucentral-schema: https://github.com/Telecominfraproject/wlan-ucentral-schema
+- ucentral-wifi: https://github.com/blogic/ucentral-wifi

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -85,13 +85,24 @@ qcom_setup_macs()
 
 	case $board in
 	cig,wf194c|\
-	cig,wf194c4|\
+	cig,wf194c4)
-	cig,wf196)
 		mac=$(grep BaseMacAddress= /dev/mtd14 | cut -dx -f2)
 		wan_mac=$(macaddr_canonicalize $mac)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		ucidef_set_network_device_mac eth0 $lan_mac
 		ucidef_set_network_device_mac eth1 $wan_mac
+		ip link set eth0 address $lan_mac
+		ip link set eth1 address $wan_mac
+		ucidef_set_label_macaddr $wan_mac
+		;;
+	cig,wf196)
+		mac=$(grep BaseMacAddress= /dev/mtd14 | cut -dx -f2)
+		wan_mac=$(macaddr_canonicalize $mac)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ip link set eth0 address $wan_mac
+		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
 	cybertan,eww622-a1)

feeds/wifi-ax/mac80211/patches/pending/211-replace_txq0.patch

@@ -0,0 +1,12 @@
+Index: backports-20210222_001-4.4.60-b157d2276/drivers/net/wireless/ath/ath11k/mac.c
+===================================================================
+--- backports-20210222_001-4.4.60-b157d2276.orig/drivers/net/wireless/ath/ath11k/mac.c
++++ backports-20210222_001-4.4.60-b157d2276/drivers/net/wireless/ath/ath11k/mac.c
+@@ -9356,6 +9356,7 @@ static int __ath11k_mac_register(struct
+ 	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+ 	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_STA_TX_PWR);
+ 	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_BSS_COLOR);
++	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CAN_REPLACE_PTK0);
+ 
+ 	if (test_bit(WMI_TLV_SERVICE_SCAN_PHYMODE_SUPPORT,
+ 		     ar->ab->wmi_ab.svc_map))