Merge pull request #462 from Telecominfraproject/main

Fixes for WIFI-9962 and others

.github/actions/create-ami-from-image/action.yml

@@ -15,7 +15,7 @@ runs:
       id: import_snapshot
       shell: bash
       run: |
-        echo "import_task_id=$(aws ec2 import-snapshot --description '${{ inputs.firmware_image_name }}' --disk-container 'Format=raw,UserBucket={S3Bucket=${{ inputs.firmware_image_s3_bucket }},S3Key=${{ inputs.firmware_image_name }}}' | jq -r '.ImportTaskId')" >> $GITHUB_OUTPUT
+        echo ::set-output name=import_task_id::$(aws ec2 import-snapshot --description '${{ inputs.firmware_image_name }}' --disk-container 'Format=raw,UserBucket={S3Bucket=${{ inputs.firmware_image_s3_bucket }},S3Key=${{ inputs.firmware_image_name }}}' | jq -r '.ImportTaskId')
 
     - name: Wait for import task to complete and get snapshot ID
       id: get_snapshot_id
@@ -26,7 +26,7 @@ runs:
           IMPORT_TASK_STATUS=$(aws ec2 describe-import-snapshot-tasks --import-task-ids ${{ steps.import_snapshot.outputs.import_task_id }} | jq -r '.ImportSnapshotTasks[].SnapshotTaskDetail.Status')
           echo "Import task status is $IMPORT_TASK_STATUS, waiting for completion."
         done
-        echo "id=$(aws ec2 describe-import-snapshot-tasks --import-task-ids ${{ steps.import_snapshot.outputs.import_task_id }} | jq -r '.ImportSnapshotTasks[].SnapshotTaskDetail.SnapshotId')" >> $GITHUB_OUTPUT
+        echo ::set-output name=id::$(aws ec2 describe-import-snapshot-tasks --import-task-ids ${{ steps.import_snapshot.outputs.import_task_id }} | jq -r '.ImportSnapshotTasks[].SnapshotTaskDetail.SnapshotId')
 
     - name: Tag snapshot with image name
       shell: bash

.github/workflows/build-dev.yml

@@ -21,10 +21,10 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf194c4', 'cig_wf196-us', 'cig_wf196-ca', 'cig_wf610d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650' ]
+        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf194c', 'cig_wf194c4', 'cig_wf196', 'cig_wf610d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'tp-link_ec420-g1', 'tplink_ex227', 'tplink_ex228', 'tplink_ex447', 'udaya_a5-id2', 'wallys_dr40x9', 'x64_vm' ]
 
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v2
 
     - name: Build image for ${{ matrix.target }}
       id: build
@@ -72,7 +72,7 @@ jobs:
         [ -f openwrt/tmp/image-file ] && aws s3api put-object-tagging --bucket "$AWS_S3_BUCKET_NAME" --key "$JSON_NAME" --tagging "{\"TagSet\":[{\"Key\":\"release\",\"Value\":\"$IS_RELEASE\"}]}"
 
         if [ ${{ matrix.target }} == 'x64_vm' ]; then
-          echo "x64_vm_image_name=$(echo $IMG_NAME)" >> $GITHUB_OUTPUT
+          echo ::set-output name=x64_vm_image_name::"$(echo $IMG_NAME)"
         fi
 
   trigger-testing:
@@ -93,7 +93,7 @@ jobs:
     needs: build
     if: startsWith(github.ref, 'refs/tags/v')
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v2
 
     - name: Use create-ami-from-image composite action
       uses: ./.github/actions/create-ami-from-image

.github/workflows/x64_vm-build-test.yml

@@ -22,7 +22,7 @@ jobs:
         target: ['x64_vm']
 
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v2
 
     - name: Build image for ${{ matrix.target }}
       id: build
@@ -70,14 +70,14 @@ jobs:
         [ -f openwrt/tmp/image-file ] && aws s3api put-object-tagging --bucket "$AWS_S3_BUCKET_NAME" --key "$JSON_NAME" --tagging "{\"TagSet\":[{\"Key\":\"release\",\"Value\":\"$IS_RELEASE\"}]}"
 
         if [[ ${{ matrix.target }} == 'x64_vm' ]]; then
-            echo "x64_vm_image_name=$(echo $IMG_NAME)" >> $GITHUB_OUTPUT
+          echo ::set-output name=x64_vm_image_name::"$(echo $IMG_NAME)"
         fi
 
   create-x64_vm-ami:
     runs-on: ubuntu-latest
     needs: build
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v2
       with:
         ref: WIFI-7206-add-workflow-to-build-virtual-ap-image
 

README.md

@@ -1,83 +1,20 @@
-# OpenWiFi AP NOS
+# Setting up your build machine
 
-OpenWrt-based access point network operating system (AP NOS) for TIP OpenWiFi.
+Requires a recent linux installation. Older systems without python 3.7 will have trouble.  See this link for details: https://openwrt.org/docs/guide-developer/quickstart-build-images
-Read more at [openwifi.tip.build](https://openwifi.tip.build/).
 
-## Building
+Install build packages:  sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml.
 
-### Setting up your build machine
+# Doing a native build on Linux
-
+First we need to clone and setup our tree. This will result in an openwrt/.
-Building requires a recent Linux installation. Older systems without Python 3.7
-will have trouble. See this guide for details:
-https://openwrt.org/docs/guide-developer/toolchain/beginners-build-guide
-
-Install build packages on Debian/Ubuntu (or see above guide for other systems):
 ```
-sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml
+./setup.py --setup
 ```
-
+Next we need to select the profile and base package selection. This setup will install the feeds, packages and generate the .config file.
-### Doing a native build on Linux
-
-Use `./build.sh <target>`, or follow the manual steps below:
-
-1. Clone and set up the tree. This will create an `openwrt/` directory.
-```shell
-./setup.py --setup    # for subsequent builds, use --rebase instead
 ```
-
-2. Select the profile and base package selection. This setup will install the
-   feeds and packages and generate the `.config` file.
-```shell
 cd openwrt
 ./scripts/gen_config.py linksys_ea8300
 ```
-
+Finally we can build the tree.
-3. Build the tree (replace `-j 8` with the number of cores to use).
+```
-```shell
+make -j X V=s
-make -j 8 V=s
 ```
-
-### Build output
-
-The build results are located in the `openwrt/bin/` directory:
-
-| Type             | Path                                                 |
-| ---------------- | ---------------------------------------------------- |
-| Firmware images  | `openwrt/bin/targets/<target>/<subtarget>/`          |
-| Kernel modules   | `openwrt/bin/targets/<target>/<subtarget>/packages/` |
-| Package binaries | `openwrt/bin/packages/<platform>/<feed>/`            |
-
-## Developer Notes
-
-### Branching model
-
-- `main` - Stable dev branch
-- `next` - Integration branch
-- `staging-*` - Feature/bug branches
-- `release/v#.#.#` - Release branches (*major.minor.patch*)
-
-### Repository structure
-
-Build files:
-- `Makefile` - Calls Docker environment per target
-- `dock-run.sh` - Dockerized build environment
-- `docker/Dockerfile` - Dockerfile for build image
-- `build.sh` - Build script
-- `setup.py` - Clone and set up the tree
-- `config.yml` - Specifies OpenWrt version and patches to apply
-
-Directories:
-- `feeds/` - OpenWiFi feeds
-- `patches/` - OpenWiFi patches applied during builds
-- `profiles/` - Per-target kernel configs, packages, and feeds
-    - [wifi-ax](profiles/wifi-ax.yml): Wi-Fi AX packages
-    - [ucentral-ap](profiles/ucentral-ap.yml): uCentral packages
-    - [x64_vm](profiles/x64_vm.yml): x86-64 VM image
-
-### uCentral packages
-
-AP-NOS packages implementing the uCentral protocol include the following
-repositories (refer to the [ucentral](feeds/ucentral/) feed for a full list):
-- ucentral-client: https://github.com/Telecominfraproject/wlan-ucentral-client
-- ucentral-schema: https://github.com/Telecominfraproject/wlan-ucentral-schema
-- ucentral-wifi: https://github.com/blogic/ucentral-wifi

config.yml

@@ -14,4 +14,3 @@ patch_folders:
   - patches/ipq807x
   - patches/rtkmipsel
   - patches/rest
-  - patches/x86

feeds/facebook/fbwifi/Makefile

@@ -0,0 +1,77 @@
+# Copyright (c) Facebook, Inc. and its affiliates.
+# All rights reserved.
+#
+# This source code is licensed under the license found in the
+# LICENSE file in the root directory of this source tree.
+#
+
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fbwifi
+PKG_VERSION:=2
+PKG_RELEASE:=0
+PKG_LICENSE:=GPL-2.0
+
+PKG_MAINTAINER:=Simon Kinane <skinane@fb.com>
+
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fbwifi
+  SUBMENU:=Captive Portals
+  SECTION:=net
+  CATEGORY:=Network
+  DEPENDS:=+iptables +luasec +luasocket \
+	+libuci-lua +luaposix \
+	+lua-cjson +uhttpd
+  TITLE:=Facebook Wi-Fi
+  PKGARCH:=all
+endef
+
+define Package/fbwifi/description
+  Facebook Wi-Fi, an AP authorisation solution
+endef
+
+
+define Package/luci-app-fbwifi
+  SUBMENU:=3. Applications
+  SECTION:=luci
+  CATEGORY:=LuCI
+  TITLE:=LuCI support for Facebook Wi-Fi
+  DEPENDS:= \
+	+fbwifi \
+	+luci-base +luci-mod-network +luci-mod-status +luci-theme-bootstrap
+endef
+
+define Package/luci-app-fbwifi/description
+  LuCI support for Facebook Wi-Fi
+endef
+
+
+define Package/fbwifi/conffiles
+/etc/config/fbwifi
+endef
+
+define Build/Prepare
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+endef
+
+define Package/fbwifi/install
+	$(INSTALL_DIR) $(1)
+	$(CP) ./files/fbwifi/* $(1)/
+endef
+
+define Package/luci-app-fbwifi/install
+	$(INSTALL_DIR) $(1)
+	$(CP) ./files/luci-app-fbwifi/* $(1)
+endef
+
+$(eval $(call BuildPackage,fbwifi))
+$(eval $(call BuildPackage,luci-app-fbwifi))

feeds/facebook/fbwifi/README.md

@@ -0,0 +1,22 @@
+# Facebook Wi-Fi v2.0 Reference Implementation for OpenWrt 
+
+## Getting started
+
+Case studies for OEM customers are available at the official page of [Facebook Wi-Fi](https://www.facebook.com/facebook-wifi).
+
+For OEM engineers, start by reading the init script in [files/etc/init.d/fbwifi](https://github.com/facebookincubator/fbc_owrt_feed/blob/master/fbwifi/files/etc/init.d/fbwifi)
+
+To enable Facebook Wi-Fi, configure the gateway_token in `/etc/config/fbwifi`, and run `fbwifi enable`.
+To disable Facebook Wi-Fi, run `fbwifi disable`.
+
+## Contents
+
+The 'files' subdirectory contains two subdirectories, one for the fbwifi
+package that implements the Facebook Wi-Fi v2.0 standard for OpenWrt, and
+another one containing a LuCI application to configure Facebook Wi-Fi.
+
+The folder structures follow *nix conventions:
+- 'etc' is the boot time scripts and configuration
+- 'usr' contains procedural scripts, lua common code module and GUI prototype for luci
+- 'www' contains the HTTP endpoints as CGI handlers 
+

feeds/facebook/fbwifi/files/fbwifi/etc/config/fbwifi

@@ -0,0 +1,6 @@
+config fbwifi 'main'
+	option enabled '0'
+	option gateway_token 'FBWIFI:GATEWAY|123456789|0123456789|abcdeABCDE123456789'
+	option http_port '2060'
+	option https_port '2061'
+	option zone 'lan'

feeds/facebook/fbwifi/files/fbwifi/etc/hotplug.d/iface/50-fbwifi

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+[ "$ACTION" = ifup ] || exit 0
+
+/etc/init.d/fbwifi enabled || exit 0
+
+ip route get fibmatch 1.1.1.1 | grep -q "$DEVICE" || exit 0
+
+logger -t fbwifi "Reloading fbwifi due to $ACTION of $INTERFACE ($DEVICE)"
+/etc/init.d/fbwifi restart

feeds/facebook/fbwifi/files/fbwifi/etc/init.d/fbwifi

@@ -0,0 +1,43 @@
+#!/bin/sh /etc/rc.common
+
+START=90
+
+USE_PROCD=1
+
+reload_service() {
+	restart
+}
+
+service_triggers() {
+	procd_add_reload_trigger fbwifi
+}
+
+start_service() {
+
+	config_load fbwifi
+	config_get_bool enabled 'main' 'enabled' '0'
+	[ "$enabled" -eq 0 ] && return
+
+	config_get http_port main http_port
+	[ -z "$http_port" ] && {
+		logger -t fbwifi "required option http_port not set"
+		exit 1
+	}
+
+	config_get https_port main https_port
+	[ -z "$https_port" ] && {
+		logger -t fbwifi "required option https_port not set"
+		exit 1
+	}
+
+	logger "[fbwifi] Enabled; starting"
+
+	mkdir -p /tmp/fbwifi
+
+	/usr/sbin/fbwifi reload
+
+	procd_open_instance
+	procd_set_param command /usr/sbin/fbwifi_validate_token_db
+	procd_set_param respawn 1 300 0
+	procd_close_instance
+}

feeds/facebook/fbwifi/files/fbwifi/usr/lib/lua/fbwifi.lua

@@ -0,0 +1,156 @@
+-- SPDX-License-Identifier: GPL-2.0-only
+-- Copyright (c) Facebook, Inc. and its affiliates.
+--
+-- FBWIFI Lua library
+-- function table
+local fbwifi = {}
+
+local http = require("ssl.https")
+local json = require("cjson")
+local log = require("posix.syslog")
+local uci = require("uci")
+
+function fbwifi.gateway_token()
+	token = uci.get("fbwifi.main.gateway_token")
+	if token and string.len(token) > 0 then
+		return token
+	else
+		log.syslog( log.LOG_WARNING, "[fbwifi] UCI option fbwifi.main.gateway_token is missing" )
+		return nil
+	end 
+end
+
+function fbwifi.validate_token( token )
+
+	local valid = false
+
+	if string.len(token or '' ) > 0 then
+
+	        GATEWAY_TOKEN = fbwifi.gateway_token()
+
+	        URL="https://api.fbwifi.com/v2.0/token"
+	        BODY="token="..token
+	        body, code, headers = http.request(URL.."?access_token="..GATEWAY_TOKEN, BODY)
+
+	        if code==200 then
+	                valid = true
+	        else
+	                log.syslog(log.LOG_WARNING, "[fbwifi] validate_token:"..body)
+	        end
+
+	end
+
+	return valid
+end
+
+local mac_to_purge=''
+function remove_client_by_mac(client)
+	state = uci.cursor("/var/state", "/tmp/fbwifi")
+
+	for key, value in pairs(client) do
+		if
+			key == 'mac' and
+			value == mac_to_purge
+		then
+			log.syslog(log.LOG_INFO, string.format("[fbwifi] Purging DB entry %s for MAC %s", client['.name'] or 'unknown', mac_to_purge) )
+			state:delete("fbwifi", client['.name'])
+			return
+		end
+	end
+end
+
+function fbwifi.instate_client_rule( token, client_mac )
+
+	log.syslog(log.LOG_INFO, "[fbwifi] Validating client "..client_mac)
+
+	state = uci.cursor("/var/state", "/tmp/fbwifi")
+	state_name = "token_" .. token
+
+	RULE_COND="iptables -w -L FBWIFI_CLIENT_TO_INTERNET -t mangle | grep -i -q \"%s\""
+	RULE_FMT="iptables -w -t mangle -%s FBWIFI_CLIENT_TO_INTERNET -m mac --mac-source \"%s\" -j MARK --set-mark 0xfb"
+	local RULE
+
+	log.syslog(log.LOG_INFO, string.format("[fbwifi] Cleaning DB for MAC %s", client_mac) )
+	mac_to_purge = client_mac
+	state:foreach("fbwifi", "client", remove_client_by_mac)
+	
+		
+	log.syslog(log.LOG_INFO, string.format("[fbwifi] Adding DB entry %s for MAC %s", state_name, client_mac) )
+	state:set("fbwifi", state_name, "client")
+	state:set("fbwifi", state_name, "token", token)
+	state:set("fbwifi", state_name, "mac", client_mac)
+	state:set("fbwifi", state_name, "authenticated", "true")
+				
+	-- verify a rule exists for the given client MAC, 
+	--   OR install it
+	RULE=string.format(RULE_COND.." || "..RULE_FMT, client_mac, "A", client_mac)
+
+	log.syslog(log.LOG_INFO, string.format( "[fbwifi] Opening iptables for %s", client_mac ) )
+	res = os.execute(RULE)
+	if res ~= 0 then 
+		log.syslog(log.LOG_WARNING, string.format( "[fbwifi] Failed to update iptables (%s)", res ) )
+	end
+	log.syslog(log.LOG_INFO, "[fbwifi] "..RULE)
+
+	state:save('fbwifi')
+	state:commit('fbwifi')
+end
+
+function fbwifi.revoke_client_rule( token )
+        
+        if (token == nil) then
+                log.syslog(log.LOG_INFO, "[fbwifi] Invalidating token, but token is Nil")
+                return
+        end
+
+	log.syslog(log.LOG_INFO, string.format( "[fbwifi] Invalidating token (%s)", token) )
+
+	state = uci.cursor("/var/state", "/tmp/fbwifi")
+	state_name = "token_" .. token
+	
+	client_mac = state:get("fbwifi", state_name, "mac")
+
+	if client_mac then
+		RULE_COND="iptables -w -L FBWIFI_CLIENT_TO_INTERNET -t mangle | grep -i -q \"%s\""
+		RULE_FMT="iptables -w -t mangle -%s FBWIFI_CLIENT_TO_INTERNET -m mac --mac-source \"%s\" -j MARK --set-mark 0xfb"
+
+		-- verify a rule exists for the given client MAC, 
+		--  AND delete it
+		RULE=string.format(RULE_COND.." && "..RULE_FMT, client_mac, "D", client_mac)
+
+		res = os.execute(RULE)
+		if res ~= 0 then 
+			log.syslog(log.LOG_WARNING, string.format( "[fbwifi] Failed to update iptables (%s)", res ) )
+		end
+		log.syslog(log.LOG_INFO, "[fbwifi] "..RULE)
+
+		state:delete("fbwifi", state_name)
+		state:save('fbwifi')
+		state:commit('fbwifi')
+	else
+		log.syslog(log.LOG_WARNING, string.format( "[fbwifi] Client MAC not found in DB (%s)", state_name ) )
+	end
+end
+
+function fbwifi.reset()
+
+	local success = false
+        GATEWAY_TOKEN = fbwifi.gateway_token()
+        URL="https://api.fbwifi.com/v2.0/gateway/reset"
+	BODY="{}"
+        body, code, headers = http.request(URL.."?access_token="..GATEWAY_TOKEN, BODY)
+
+        if code==200 then
+                log.syslog(log.LOG_INFO, "[fbwifi] Reset committed")
+                success = true
+        else
+                log.syslog(log.LOG_WARNING, "[fbwifi] Reset failed : "..body)
+        end
+
+	return success
+end
+
+--
+-- Return the function table to the host script
+--
+return fbwifi

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi

@@ -0,0 +1,58 @@
+#!/bin/sh
+
+case "$1" in
+disable)
+	uci set fbwifi.main.enabled=0
+
+	uci delete firewall.fbwifi
+
+	uci delete uhttpd.fbwifi_redirect
+
+	uci delete uhttpd.main.json_script
+	uci set uhttpd.main.cert='/etc/uhttpd.crt'
+	uci set uhttpd.main.key='/etc/uhttpd.key'
+	uci set uhttpd.main.rfc1918_filter=1
+	;;
+enable)
+	uci set fbwifi.main.enabled=1
+
+	uci set firewall.fbwifi=include
+	uci set firewall.fbwifi.enabled=1
+	uci set firewall.fbwifi.family=ipv4
+	uci set firewall.fbwifi.path=/usr/share/fbwifi/firewall.include
+	uci set firewall.fbwifi.reload=1
+	uci set firewall.fbwifi.type=script
+
+	uci set uhttpd.fbwifi_redirect=uhttpd
+	uci set uhttpd.fbwifi_redirect.enabled=1
+	uci set uhttpd.fbwifi_redirect.cert='/tmp/fbwifi/https_server_cert'
+	uci set uhttpd.fbwifi_redirect.home='/dev/null'
+	uci set uhttpd.fbwifi_redirect.json_script='/tmp/fbwifi/uhttpd-redirect.json'
+	uci set uhttpd.fbwifi_redirect.key='/tmp/fbwifi/https_server_key'
+	uci set uhttpd.fbwifi_redirect.listen_http='0.0.0.0:2060'
+	uci set uhttpd.fbwifi_redirect.listen_https='0.0.0.0:2061'
+
+	uci set uhttpd.main.cert='/tmp/fbwifi/https_server_cert'
+	uci set uhttpd.main.json_script='/usr/share/fbwifi/uhttpd.json'
+	uci set uhttpd.main.key='/tmp/fbwifi/https_server_key'
+	uci set uhttpd.main.rfc1918_filter=0
+	;;
+reload)
+	/usr/sbin/fbwifi_get_config
+
+	login_url=$(uci -c /var/state get fbwifi.main.captive_portal_url)
+	[ -z "$login_url" ] && {
+		logger -t fbwifi "captive_portal_url not available yet"
+		exit 1
+	}
+	printf '{ "request": [ ["redirect", "%s", 302] ] }' "$login_url" > /tmp/fbwifi/uhttpd-redirect.json
+
+	/etc/init.d/uhttpd restart
+
+	exit 0
+	;;
+esac
+
+uci commit
+/etc/init.d/uhttpd restart
+reload_config

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi_debug_dump

@@ -0,0 +1,8 @@
+echo -e "Runtime configuration and token DB\n"
+uci -c /var/state export fbwifi
+
+echo -e "\nDynamic firewall flow rules\n"
+iptables -t mangle -L FBWIFI_CLIENT_TO_INTERNET
+
+echo -e "\nDHCP leases\n"
+cat /tmp/dhcp.leases

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi_gateway_info_update

@@ -0,0 +1,39 @@
+#!/usr/bin/lua
+
+http = require("ssl.https")
+json = require("cjson")
+log = require("posix.syslog")
+socket = require("socket")
+require("uci")
+fbwifi = require("fbwifi")
+
+GATEWAY_TOKEN = fbwifi.gateway_token()
+state = uci.cursor("/var/state", "/tmp/fbwifi")
+
+payload="name="..socket.dns.gethostname()
+
+function queue_ssid_update(iface)
+	bssid_file="/sys/class/net/br-"..iface["network"].."/address"
+	local file = io.open(bssid_file)
+        if file then
+            for line in file:lines() do
+		payload=payload.."&bssid[]="..line
+            end
+	    file:close()
+	    payload=payload.."ssid[]="..iface["ssid"]
+        else
+	    log.syslog(log.LOG_WARNING, "[fbwifi] Failed to find BSSID for interface br-"..iface["network"])
+        end
+end
+
+state:foreach("wireless", "wifi-iface", queue_ssid_update)
+
+URL="https://api.fbwifi.com/v2.0/gateway"
+body, code, headers = http.request(URL.."?access_token="..GATEWAY_TOKEN, payload)
+if code == 200 then 
+	log.syslog(log.LOG_INFO, "[fbwifi] gateway information updated "..body)
+	os.exit(0)
+else
+	log.syslog(log.LOG_WARNING, "[fbwifi] gateway API failed "..body)
+	os.exit(code)
+end

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi_get_config

@@ -0,0 +1,111 @@
+#!/usr/bin/lua
+http = require("ssl.https")
+json = require("cjson")
+require("uci")
+log = require("posix.syslog")
+fbwifi = require("fbwifi")
+
+GATEWAY_TOKEN = fbwifi.gateway_token()
+
+http_port = uci.get("fbwifi.main.http_port")
+https_port = uci.get("fbwifi.main.https_port")
+
+statefile = assert(io.open("/var/state/fbwifi", "a"), "could not create state file")
+statefile:close()
+
+state = uci.cursor("/var/state", "/tmp/fbwifi")
+
+URL="https://api.fbwifi.com/v2.0/gateway"
+body, code, headers = http.request(URL.."?access_token="..GATEWAY_TOKEN.."&fields=config,config_version")
+
+if code == 200 then
+	log.syslog(log.LOG_INFO, "[fbwifi] Got gateway config ("..code..")")
+else
+	log.syslog(log.LOG_CRIT, "[fbwifi] Failed to get gateway config ("..code..")")
+	os.exit(1)
+end
+
+obj = json.decode(body)
+
+function save_cert(name, value)
+	log.syslog(log.LOG_INFO, "[fbwifi] Saving cert "..name)
+	local f = assert(io.open("/tmp/fbwifi/"..name, "w"))
+	f:write(value)
+	f:close()
+end
+
+function process_redirect(ix, host)
+	IP_SET = "ip addr replace dev lo "..host
+	local result = os.execute(IP_SET)
+	if result == 0 then
+		log.syslog(log.LOG_INFO, "[fbwifi] Redirect address applied "..host)
+	else
+		log.syslog(log.LOG_WARNING, "[fbwifi] Failed to apply redirect address "..host)
+	end
+
+	ip = string.match(host, '([0-9\.]*)/([0-9]*)')
+	RULE_FMT="grep -q \"%s\" /etc/hosts || echo \"%s\tstar.fbwifigateway.net\" >> /etc/hosts"
+	HOSTS_RULE = string.format(RULE_FMT, ip, ip)
+	result = os.execute(HOSTS_RULE)
+	if result == 0 then
+		log.syslog(log.LOG_INFO, "[fbwifi] Cached redirect host for DNS")
+	else
+		log.syslog(log.LOG_WARNING, "[fbwifi] Failed to amend /etc/hosts")
+		log.syslog(log.LOG_INFO, "[fbwifi] "..HOSTS_RULE)
+	end
+
+	result = os.execute("iptables -t nat -A FBWIFI_HOST_REDIRLIST -p tcp --dport 80 -d "..ip.." -j ACCEPT # REDIRECT --to-ports "..http_port)
+	--print(result)
+	result = os.execute("iptables -t nat -A FBWIFI_HOST_REDIRLIST -p tcp --dport 443 -d "..ip.."  -j ACCEPT # REDIRECT --to-ports "..https_port)
+	--print(result)
+end
+
+save_cert("https_server_cert", obj['config']['https_server_cert'])
+save_cert("https_server_key", obj['config']['https_server_key'])
+
+result = os.execute("iptables -t nat -F FBWIFI_HOST_REDIRLIST")
+--print(result)
+table.foreach(obj['config']['host_redirect_ips'], process_redirect)
+
+RULE_FORMAT = "iptables -t mangle -A FBWIFI_TRAFFIC_ALLOWLIST -d %s -p %s --dport %s -j MARK --set-mark 0xfb"
+function process_traffic_rule(ix, rule)
+	log.syslog(log.LOG_INFO, "[fbwifi] Traffic rule "..ix)
+	
+	if rule["protocol"] == 6 then
+		PROTO = "tcp"
+	elseif rule["protocol"] == 17 then
+		PROTO = "udp"
+	end
+	RULE = string.format(RULE_FORMAT, rule["ip"], PROTO, rule["port"])
+	local result = os.execute(RULE)
+	if result == 0 then
+		log.syslog(log.LOG_INFO, "[fbwifi] Traffic rule "..ix)
+	else
+		log.syslog(log.LOG_WARNING, "[fbwifi] Failed to install traffic rule ; "..RULE)
+	end
+end
+
+local cross_origin_list = {}
+function process_cross_origin_rule(ix, url)
+	log.syslog(log.LOG_INFO, "[fbwifi] Cross origin rule "..url)
+	table.insert(cross_origin_list, url)
+end
+
+function process_url(url_purpose, fqdn)
+	log.syslog(log.LOG_INFO, "[fbwifi] Caching "..url_purpose)
+	state:set("fbwifi", "main", url_purpose, fqdn)	
+end
+
+state:set("fbwifi", "main", "config")
+
+result = os.execute("iptables -t mangle -F FBWIFI_TRAFFIC_ALLOWLIST ")
+--print(result)
+table.foreach(obj['config']['traffic_allowlist'], process_traffic_rule)
+table.foreach(obj['config']['cross_origin_allowlist'], process_cross_origin_rule)
+table.foreach(obj['config']['urls'], process_url)
+
+state:set("fbwifi", "main", "cross_origin_allow_rules", cross_origin_list)
+state:set("fbwifi", "main", "config_version", obj['config_version'])
+
+state:save('fbwifi')
+state:commit('fbwifi')

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi_validate_token_db

@@ -0,0 +1,75 @@
+#!/usr/bin/lua
+
+https = require("ssl.https")
+json = require("cjson")
+log = require("posix.syslog")
+fbwifi = require("fbwifi")
+require("uci")
+
+state = uci.cursor("/var/state", "/tmp/fbwifi")
+GATEWAY_TOKEN = fbwifi.gateway_token()
+
+request = { 
+	tokens = {}, 
+	traffic_type = "total",
+	config_version = state:get("fbwifi", "main", "config_version")
+}
+
+function queue_token(client)
+
+	request.tokens[client.token]={
+		incoming = json.null,
+		outgoing = json.null,
+		connected_time_sec = json.null,
+		inactive_time_sec = json.null,
+		signal_rssi_dbm = json.null,
+		--expected_tpus_mbps = json.null,
+		is_connected = true
+	}
+
+end
+
+state:foreach("fbwifi", "client", queue_token)
+print( "\nRequest:\n"..json.encode(request) )
+
+URL="https://api.fbwifi.com/v2.0/tokens"
+BODY=string.format(
+	"tokens=%s&traffic_type=%s&config_version=%s",
+	json.encode(request.tokens),
+	"total",
+	state:get("fbwifi", "main", "config_version")
+)
+
+body, code, headers = https.request(URL.."?access_token="..GATEWAY_TOKEN, BODY)
+
+if code then
+	print( "\nResponse:\n"..body )
+end
+
+response = json.decode(body)
+--print(response)
+--table.foreach(response,print)
+--table.foreach(response.tokens,print)
+
+if response.config_valid then
+	log.syslog(log.LOG_INFO, "[fbwifi] Config validated")
+else
+	log.syslog(log.LOG_WARNING, "[fbwifi] config is stale, refreshing config")
+        local result = os.execute("/usr/sbin/fbwifi reload")
+        if result == 0 then
+                log.syslog(log.LOG_INFO, "[fbwifi] successfully fetched and loaded new config ")
+        else
+                log.syslog(log.LOG_WARNING, "[fbwifi] failed to fetch and load new config, possible stale config")
+        end
+end
+
+function process_token(token, metadata)
+	table.foreach(metadata,print)
+	if metadata.valid then
+		print("OK: "..token)	
+	else
+		print("Nok: "..token)	
+		fbwifi.revoke_client_rule( token )
+	end
+end
+table.foreach(response.tokens,process_token)

feeds/facebook/fbwifi/files/fbwifi/usr/share/fbwifi/firewall.include

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (c) Facebook, Inc. and its affiliates.
+
+IPT4="/usr/sbin/iptables"
+
+set -- --wait 1 --wait-interval 100
+
+fbwifi_http_port="$(uci get fbwifi.main.http_port)"
+[ -n "$fbwifi_http_port" ] || {
+	logger -t fbwifi "required option http_port not set"
+	exit 1
+}
+
+fbwifi_https_port="$(uci get fbwifi.main.https_port)"
+[ -n "$fbwifi_https_port" ] || {
+	logger -t fbwifi "required option https_port not set"
+	exit 1
+}
+
+fbwifi_zone="$(uci get fbwifi.main.zone)"
+[ -n "$fbwifi_zone" ] || {
+	logger -t fbwifi "required option zone  not set"
+	exit 1
+}
+
+fbwifi_ifaces="$(fw3 -q zone "$fbwifi_zone")"
+
+## Create custom chains
+"$IPT4" "$@" -t filter -N FBWIFI_FORWARD 2>/dev/null
+"$IPT4" "$@" -t filter -N FBWIFI_INPUT 2>/dev/null
+"$IPT4" "$@" -t mangle -N FBWIFI_CLIENT_TO_INTERNET 2>/dev/null
+"$IPT4" "$@" -t mangle -N FBWIFI_PREROUTING 2>/dev/null
+"$IPT4" "$@" -t mangle -N FBWIFI_TRAFFIC_ALLOWLIST 2>/dev/null
+"$IPT4" "$@" -t nat -N FBWIFI_CLIENT_TO_INTERNET 2>/dev/null
+"$IPT4" "$@" -t nat -N FBWIFI_PREROUTING 2>/dev/null
+"$IPT4" "$@" -t nat -N FBWIFI_HOST_REDIRLIST 2>/dev/null
+
+## Flush custom chains
+"$IPT4" "$@" -t filter -F FBWIFI_FORWARD
+"$IPT4" "$@" -t filter -F FBWIFI_INPUT
+"$IPT4" "$@" -t mangle -F FBWIFI_CLIENT_TO_INTERNET
+"$IPT4" "$@" -t mangle -F FBWIFI_PREROUTING
+"$IPT4" "$@" -t mangle -F FBWIFI_TRAFFIC_ALLOWLIST
+"$IPT4" "$@" -t nat -F FBWIFI_CLIENT_TO_INTERNET
+"$IPT4" "$@" -t nat -F FBWIFI_PREROUTING
+"$IPT4" "$@" -t nat -F FBWIFI_HOST_REDIRLIST
+
+## Populate custom chains
+"$IPT4" "$@" -t filter -A FBWIFI_FORWARD -p udp --dport 53 -m conntrack --ctstate NEW -j ACCEPT
+"$IPT4" "$@" -t filter -A FBWIFI_FORWARD -m conntrack --ctstate NEW -m mark --mark 0xfb -j ACCEPT
+"$IPT4" "$@" -t filter -A FBWIFI_FORWARD -j REJECT
+"$IPT4" "$@" -t filter -A FBWIFI_INPUT -p tcp --dport "$fbwifi_http_port" -m conntrack --ctstate NEW -j ACCEPT
+"$IPT4" "$@" -t filter -A FBWIFI_INPUT -p tcp --dport "$fbwifi_https_port"  -m conntrack --ctstate NEW -j ACCEPT
+"$IPT4" "$@" -t filter -A FBWIFI_INPUT -p tcp --dport 443 -m conntrack --ctstate NEW -j ACCEPT
+"$IPT4" "$@" -t mangle -A FBWIFI_PREROUTING -j FBWIFI_CLIENT_TO_INTERNET
+"$IPT4" "$@" -t mangle -A FBWIFI_PREROUTING -j FBWIFI_TRAFFIC_ALLOWLIST
+"$IPT4" "$@" -t nat -A FBWIFI_PREROUTING -j FBWIFI_CLIENT_TO_INTERNET
+"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 80 -m conntrack --ctstate NEW -j FBWIFI_HOST_REDIRLIST
+"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 443 -m conntrack --ctstate NEW -j FBWIFI_HOST_REDIRLIST
+"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p udp --dport 443 -m conntrack --ctstate NEW -j FBWIFI_HOST_REDIRLIST
+"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 80 -m conntrack --ctstate NEW -m mark --mark 0xfb -j ACCEPT
+"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 443 -m conntrack --ctstate NEW -m mark --mark 0xfb -j ACCEPT
+"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p udp --dport 443 -m conntrack --ctstate NEW -m mark --mark 0xfb -j ACCEPT
+"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 80 -m conntrack --ctstate NEW -j REDIRECT --to-ports "$fbwifi_http_port"
+
+## Hook custom chains in firewall3 chains
+"$IPT4" "$@" -t filter -I "zone_${fbwifi_zone}_input" 2 -j FBWIFI_INPUT
+"$IPT4" "$@" -t filter -I "zone_${fbwifi_zone}_forward" 2 -j FBWIFI_FORWARD
+"$IPT4" "$@" -t nat -I "zone_${fbwifi_zone}_prerouting" 2 -j FBWIFI_PREROUTING
+# There are no firewall3 zone chains in the mangle table so we need to do this for all interfaces in the zone
+for iface in $fbwifi_ifaces; do
+	"$IPT4" "$@" -t mangle -I PREROUTING -i "$iface" -j FBWIFI_PREROUTING
+done

feeds/facebook/fbwifi/files/fbwifi/usr/share/fbwifi/uhttpd.json

@@ -0,0 +1,8 @@
+{
+  "request": [
+    [ "if",
+      [ "regex", "REQUEST_URI", "^/fbwifi" ],
+      [ "rewrite", "/cgi-bin%REQUEST_URI%" ]
+    ]
+  ]
+}

feeds/facebook/fbwifi/files/fbwifi/www/cgi-bin/fbwifi/v2.0/auth

@@ -0,0 +1,70 @@
+#!/usr/bin/lua
+require("uci")
+log = require("posix.syslog")
+fbwifi = require("fbwifi")
+
+state = uci.cursor("/var/state", "/tmp/fbwifi")
+function process_cors()
+	origin = os.getenv("HTTP_ORIGIN")
+	log.syslog(log.LOG_INFO, string.format("[fbwifi] [auth] process_cors origin %s", origin or 'not found') )
+	if string.len(origin or '') > 0 then
+		allow_list = state:get("fbwifi", "main", "cross_origin_allow_rules")
+		for _, value in pairs(allow_list) do
+    			if value == origin then
+				log.syslog(log.LOG_INFO, "[fbwifi] [auth] process_cors Appending CORS Headers to HTTP")
+				print("Access-Control-Allow-Origin: "..origin)
+				print("Vary: Origin")
+				break
+			end
+		end
+	else	
+		log.syslog(log.LOG_INFO, "[fbwifi] [auth] process_cors No CORS Headers added to Response")
+	end
+end
+
+method = os.getenv("REQUEST_METHOD")
+if method == 'GET' then
+	log.syslog(log.LOG_INFO, "[fbwifi] [auth] GET handler")
+	print("Status: 302 Found")
+	print("Location: "..state:get("fbwifi", "main", "landing_page_url"))
+	process_cors()
+	print ('\n')
+
+elseif method == 'POST' then
+	local token
+	
+	log.syslog(log.LOG_INFO, "[fbwifi] [auth] POST handler")
+	process_cors()
+	print("Status: 200 OK")
+
+	form_data=io.read()
+	while form_data do
+		token = string.match(form_data, '[%d]+')
+		if string.len(token or '') > 14 then
+
+			client = os.getenv("REMOTE_ADDR")
+			f = io.popen("awk '/"..client..".*0x2/ { printf(\"%s\", $4) }' /proc/net/arp", 'r')
+			client_mac = assert(f:read('*a'))
+			f:close()
+
+			if fbwifi.validate_token(token) then
+                                log.syslog(log.LOG_INFO, string.format( "[fbwifi] [auth] POST handler : Validating Token (%s) for MAC (%s)", token or 'nil', client_mac or 'nil') )
+				fbwifi.instate_client_rule(token, client_mac)
+				print("\n{\"valid\":true}\n")
+			else
+                                log.syslog(log.LOG_WARNING, string.format( "[fbwifi] [auth] POST handler : ! Invalid token (%s) for mac (%s) !", token or 'nil', client_mac or 'nil') )
+				fbwifi.revoke_client_rule(token)
+				print("\n{\"valid\":false}\n")
+			end
+			log.syslog(log.LOG_INFO, "[fbwifi] [auth] POST handler completed")
+			return
+		end
+
+		form_data=io.read()
+	end
+	print ('\n')
+
+	log.syslog(log.LOG_WARNING, string.format("[fbwifi] [auth] POST handler : token not found" ))
+	fbwifi.revoke_client_rule(token)
+	print("\n{\"valid\":false}\n")
+end

feeds/facebook/fbwifi/files/fbwifi/www/cgi-bin/fbwifi/v2.0/capport

@@ -0,0 +1,42 @@
+#!/usr/bin/lua
+json = require("cjson")
+require("uci")
+
+state = uci.cursor("/var/state", "/tmp/fbwifi")
+client_mac = ""
+token = ""
+
+response = {}
+response['venue-info-url'] = state:get("fbwifi", "main", "capport_venue_info_url")
+
+function map_remote_mac_to_token(client)
+        for key, value in pairs(client) do
+                if
+                        key == 'mac' and
+                        value == client_mac
+                then
+			token = client.token
+                        return false
+                end
+        end
+end
+
+function hasValidToken(client_ip)
+	f = io.popen("awk '/"..client_ip..".*0x2/ { printf(\"%s\", $4) }' /proc/net/arp", 'r')
+	client_mac = assert(f:read('*a'))
+	f:close()
+	state:foreach("fbwifi", "client", map_remote_mac_to_token)
+
+	return 0 < string.len(token)
+end
+
+print("Content-type: application/captive+json; charset=utf-8\n")
+
+client = os.getenv("REMOTE_ADDR")
+response['captive'] = not hasValidToken(client)
+
+if response['captive'] then
+	response['user-portal-url'] = state:get("fbwifi", "main", "captive_portal_url")
+end
+
+print( json.encode(response) )

feeds/facebook/fbwifi/files/fbwifi/www/cgi-bin/fbwifi/v2.0/info

@@ -0,0 +1,57 @@
+#!/usr/bin/lua
+json = require("cjson")
+fbwifi = require("fbwifi")
+
+state = uci.cursor("/var/state", "/tmp/fbwifi")
+GATEWAY_TOKEN = fbwifi.gateway_token()
+
+response = { api_version = "2.0", token = json.null }
+client_mac = ""
+
+function process_cors()
+        origin = os.getenv("HTTP_ORIGIN")
+        if string.len(origin or '') > 0 then
+                allow_list = state:get("fbwifi", "main", "cross_origin_allow_rules")
+                for _, value in pairs(allow_list) do
+                        if value == origin then
+                                print("Access-Control-Allow-Origin: "..origin)
+                                print("Vary: Origin")
+                                break
+                        end
+                end
+        end
+end
+
+function map_remote_mac_to_token(client)
+
+	for key, value in pairs(client) do
+		if
+			key == 'mac' and
+			value == client_mac
+		then
+			response.token = client.token
+			return false -- escape outer loop
+		end
+	end
+end
+
+function getClientToken(client_ip)
+	f = io.popen("awk '/"..client_ip..".*0x2/ { printf(\"%s\", $4) }' /proc/net/arp", 'r')
+	client_mac = assert(f:read('*a'))
+	f:close()
+
+	state:foreach("fbwifi", "client", map_remote_mac_to_token)
+end
+
+function getGatewayId()
+	id = string.match(GATEWAY_TOKEN, 'FBWIFI:GATEWAY|[0-9]*|([0-9]*)')
+	return id
+end
+
+process_cors()
+print("Content-type: application/json; charset=utf-8\n")
+
+getClientToken(os.getenv("REMOTE_ADDR"))
+response.gateway_id = getGatewayId()
+
+print( json.encode(response) )

feeds/facebook/fbwifi/files/luci-app-fbwifi/usr/lib/lua/luci/controller/fbwifi.lua

@@ -0,0 +1,12 @@
+-- SPDX-License-Identifier: GPL-2.0-only
+-- Copyright (c) Facebook, Inc. and its affiliates.
+
+module("luci.controller.fbwifi", package.seeall)
+
+sys = require "luci.sys"
+ut = require "luci.util"
+
+function index()
+    entry({"admin", "network", "fbwifi"}, template("fbwifi"), "Facebook Wi-Fi", 90).dependent=false
+end
+

feeds/facebook/fbwifi/files/luci-app-fbwifi/usr/lib/lua/luci/view/fbwifi.htm

@@ -0,0 +1,16 @@
+<%#
+ Copyright
+ Licensed to the public under the GNU General Public License v2.
+-%>
+
+<%+header%>
+
+<h1>Facebook Wi-Fi</h1>
+<%
+	require("uci")
+	state = uci.cursor("/var/state", "/tmp/fbwifi")
+	url = state:get("fbwifi", "main", "captive_portal_config_url")
+%>
+<a href="<% print(url) %>">Configure FB business page</a>
+
+<%+footer%>

feeds/ipq807x/ipq807x/base-files/etc/board.d/01_leds

@@ -34,14 +34,7 @@ edgecore,eap104)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
 	ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0"
 	;;
-liteon,wpx8324)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "orange:wifi2" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
-	ucidef_set_led_netdev "wan" "wan" "blue:uplink" "eth0"
-	;;
 hfcl,ion4xi|\
-hfcl,ion4x|\
-hfcl,ion4x_2|\
 hfcl,ion4xe)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
@@ -50,11 +43,6 @@ glinet,ax1800|\
 glinet,axt1800)
 	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
 	;;
-yuncore,fap650|\
-muxi,ap3220l)
-        ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
-        ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
-	;;
 esac
 
 board_config_flush

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -13,8 +13,6 @@ qcom_setup_interfaces()
 
 	case $board in
 	hfcl,ion4xi|\
-	hfcl,ion4x|\
-	hfcl,ion4x_2|\
 	hfcl,ion4xe)
 		ucidef_set_interface_wan "eth0 eth1"
 		ucidef_set_interface_lan ""
@@ -33,15 +31,10 @@ qcom_setup_interfaces()
 	cig,wf194c|\
 	cig,wf194c4|\
 	edgecore,eap106|\
-	indio,um-310ax-v1|\
-	indio,um-510axp-v1|\
-	indio,um-510axm-v1|\
 	qcom,ipq5018-mp03.3|\
 	yuncore,ax840|\
 	motorola,q14|\
-	sercomm,wallaby|\
+	sercomm,wallaby)
-	plasmacloud,pax1800-v1|\
-	plasmacloud,pax1800-v2)
 		ucidef_set_interface_lan "eth0"
 		ucidef_set_interface_wan "eth1"
 		;;
@@ -51,29 +44,19 @@ qcom_setup_interfaces()
 		ucidef_set_interface_wan "eth0"
 		;;
 	edgecore,eap102|\
-	liteon,wpx8324|\
+	edgecore,eap104|\
 	wallys,dr6018|\
 	cig,wf188n|\
-	cig,wf196|\
+	cig,wf196)
-	muxi,ap3220l)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
-       cig,wf660a)
-                ucidef_set_interface_lan "eth0"		
-		;;
-	yuncore,fap650)
-		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
-		ucidef_set_interface_wan "eth4"
-		;;
 	qcom,ipq807x-hk14)
 		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 		ucidef_set_interface_wan "eth4"
 		;;
 	wallys,dr6018-v4|\
-	glinet,ax1800|\
+	glinet,ax1800)
-	meshpp,s618-cp03|\
-	meshpp,s618-cp01)
 		ucidef_set_interface_lan "eth1 eth2 eth3 eth4"
 		ucidef_set_interface_wan "eth0"
 		;;
@@ -85,12 +68,6 @@ qcom_setup_interfaces()
 		ucidef_add_switch_attr "switch1" "enable" "false"
 		ucidef_add_switch_attr "switch1" "reset" "true"
 		;;
-	edgecore,eap104)
-		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch1" \
-			"6@eth1" "1:lan1" "2:lan2" "3:lan3" "4:lan4"
-		;;
 	esac
 }
 
@@ -99,32 +76,14 @@ qcom_setup_macs()
 	local board="$1"
 
 	case $board in
-	cig,wf188n|\
 	cig,wf194c|\
-	cig,wf194c4)
+	cig,wf194c4|\
-		mtd=$(find_mtd_chardev "0:APPSBLENV")
+	cig,wf196)
-		[ -z "$mtd" ] && return;
+		mac=$(grep BaseMacAddress= /dev/mtd14 | cut -dx -f2)
-		mac=$(grep BaseMacAddress= $mtd | cut -dx -f2)
-		[ -z "$mac" ] && return;
 		wan_mac=$(macaddr_canonicalize $mac)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		ucidef_set_network_device_mac eth0 $lan_mac
 		ucidef_set_network_device_mac eth1 $wan_mac
-		ip link set eth0 address $lan_mac
-		ip link set eth1 address $wan_mac
-		ucidef_set_label_macaddr $wan_mac
-		;;
-	cig,wf196)
-		mtd=$(find_mtd_chardev "0:APPSBLENV")
-		[ -z "$mtd" ] && return;
-		mac=$(grep BaseMacAddress= $mtd | cut -dx -f2)
-		[ -z "$mac" ] && return;
-		wan_mac=$(macaddr_canonicalize $mac)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth1 $lan_mac
-		ucidef_set_network_device_mac eth0 $wan_mac
-		ip link set eth0 address $wan_mac
-		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
 	cybertan,eww622-a1)
@@ -136,25 +95,6 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth1 $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
-	indio,um-310ax-v1|\
-	indio,um-510axp-v1|\
-	indio,um-510axm-v1|\
-	yuncore,ax840)
-		wan_mac=$(cat /sys/class/net/eth1/address)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	yuncore,fap650)
-		wan_mac=$(cat /sys/class/net/eth4/address)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	muxi,ap3220l)
-		wan_mac=$(mtd_get_mac_binary 0:Product_Info 0x5b)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth0 $wan_mac
-		ucidef_set_network_device_mac eth1 $lan_mac
-		ip link set eth0 address $wan_mac
-		ip link set eth1 address $lan_mac
-		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -49,15 +49,6 @@ ath11k_generate_macs_ion4x() {
 	echo -ne \\x${wifimac2//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_pax1800() {
-	touch /lib/firmware/ath11k-macs
-	eth=$(cat /sys/class/net/eth0/address)
-	mac1=$(macaddr_add $eth 10)
-	mac2=$(macaddr_add $eth 2)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
 caldata_die() {
         echo "caldata: " "$*"
         exit 1
@@ -70,9 +61,6 @@ caldata_extract() {
         local mtd
 
         mtd=$(find_mtd_chardev $part)
-        if [ -z "$mtd" ]; then                                 
-                mtd=/dev/$(echo $(find_mmc_part $part) | sed 's/^.\{5\}//')
-        fi                	
         [ -n "$mtd" ] || caldata_die "no mtd device found for partition $part"
 
         dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
@@ -89,13 +77,11 @@ case "$FIRMWARE" in
 	cig,wf196|\
 	edgecore,eap102 |\
 	edgecore,eap106 |\
-	indio,um-310ax-v1|\
-	indio,um-510axp-v1|\
-	indio,um-510axm-v1|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
 	tplink,ex447|\
+	yuncore,ax840|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -105,24 +91,14 @@ case "$FIRMWARE" in
 	case "$board" in
 	cig,wf188|\
 	cig,wf188n|\
-	cig,wf660a|\
 	edgecore,eap101|\
 	hfcl,ion4xi|\
-	hfcl,ion4x_2|\
-	hfcl,ion4x|\
 	hfcl,ion4xe|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
-	meshpp,ipq6018-cp01|\
-	meshpp,ipq6018-cp03|\
-	qcom,ipq6018-cp03|\
 	qcom,ipq6018-cp01|\
 	xiaomi,ax1800|\
-	glinet,ax1800|\
+	glinet,ax1800)
-	yuncore,ax840|\
-	yuncore,fap650|\
-	plasmacloud,pax1800-v1|\
-	plasmacloud,pax1800-v2)
                 caldata_extract "0:ART" 0x1000 0x20000  
 		;;
 	esac
@@ -131,9 +107,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	case "$board" in
 	cybertan,eww622-a1|\
 	edgecore,eap104|\
-	liteon,wpx8324|\
 	motorola,q14|\
-	muxi,ap3220l|\
 	qcom,ipq5018-mp03.1)
                 caldata_extract "0:ART" 0x1000 0x20000  
 		;;
@@ -149,19 +123,14 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 ath11k/qcn6122/hw1.0/caldata_2.bin)
 	case "$board" in
 	motorola,q14|\
-	edgecore,eap104|\
+	edgecore,eap104)
-	liteon,wpx8324)
                 caldata_extract "0:ART" 0x4c000 0x20000  
 		;;
-	muxi,ap3220l)
-		caldata_extract "0:ART" 0x26800 0x20000
-		;;
 	esac
 	;;
 ath11k/QCN9074/hw1.0/caldata_1.bin)
 	case "$board" in
 	cig,wf196|\
-	wallys,dr6018-v4|\
 	cybertan,eww622-a1|\
 	qcom,ipq5018-mp03.1|\
 	qcom,ipq807x-hk14)
@@ -180,33 +149,21 @@ ath11k/QCN9074/hw1.0/caldata_2.bin)
 ath11k-macs)
 	case "$board" in
 	hfcl,ion4xi|\
-	hfcl,ion4x|\
-	hfcl,ion4x_2|\
 	hfcl,ion4xe)                                               
 		ath11k_generate_macs_ion4x
 		;;
 	edgecore,eap101)
 		ath11k_generate_macs_eap101
 		;;
-	yuncore,ax840|\
 	edgecore,eap102|\
 	edgecore,eap106|\
-	indio,um-310ax-v1|\
-	indio,um-510axp-v1|\
-	indio,um-510axm-v1|\
-	cig,wf660a|\
 	cig,wf188n)
 		ath11k_generate_macs
 		;;
 	cig,wf194c|\
-	cig,wf194c4|\
+	cig,wf194c)
-	cig,wf196)
 		ath11k_generate_macs_wf194
 		;;
-	plasmacloud,pax1800-v1|\
-	plasmacloud,pax1800-v2)
-		ath11k_generate_macs_pax1800
-		;;
 	esac
 	;;
 *)

feeds/ipq807x/ipq807x/base-files/lib/upgrade/dualboot_datachk.sh

@@ -1,126 +0,0 @@
-# The U-Boot loader with the datachk patchset for dualbooting requires image
-# sizes and checksums to be provided in the U-Boot environment.
-# The devices come with 2 main partitions - while one is active
-# sysupgrade will flash the other. The boot order is changed to boot the
-# newly flashed partition. If the new partition can't be booted due to
-# upgrade failures the previously used partition is loaded.
-
-platform_post_upgrade_sanity_check()
-{
-	local part_name=$1
-	local inactive_mtd=$2
-	local cfg_md5=$3
-	local part_offset=$4
-	local part_size=$5
-
-	md5_part_disk=$(dd if=/dev/${inactive_mtd} bs=$((64*1024)) skip=$((part_offset / (64*1024))) count=$((part_size / (64*1024))) 2>&- | md5sum | awk '{print $1}')
-
-	if [ "${cfg_md5}" != "${md5_part_disk}" ]; then
-	      echo "post-flashing checksum mismatch: ${part_name}" >&2
-	      echo "${cfg_md5} != ${md5_part_disk}"
-	      return 1
-	fi
-
-	return 0
-}
-
-platform_do_upgrade_dualboot_datachk() {
-	local tar_file="$1"
-	local restore_backup
-	local primary_kernel_mtd
-
-	local setenv_script="/tmp/fw_env_upgrade"
-
-	local kernel_mtd="$(find_mtd_index $PART_NAME)"
-	local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
-	local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
-
-	# detect to which flash region the new image is written to.
-	#
-	# 1. check what is the mtd index for the first flash region on this
-	#    device
-	# 2. check if the target partition ("inactive") has the mtd index of
-	#    the first flash region
-	#
-	#    - when it is: the new bootseq will be 1,2 and the first region is
-	#      modified
-	#    - when it isnt: bootseq will be 2,1 and the second region is
-	#      modified
-	#
-	# The detection has to be done via the hardcoded mtd partition because
-	# the current boot might be done with the fallback region. Let us
-	# assume that the current bootseq is 1,2. The bootloader detected that
-	# the image in flash region 1 is corrupt and thus switches to flash
-	# region 2. The bootseq in the u-boot-env is now still the same and
-	# the sysupgrade code can now only rely on the actual mtd indexes and
-	# not the bootseq variable to detect the currently booted flash
-	# region/image.
-	#
-	# In the above example, an implementation which uses bootseq ("1,2") to
-	# detect the currently booted image would assume that region 1 is booted
-	# and then overwrite the variables for the wrong flash region (aka the
-	# one which isn't modified). This could result in a device which doesn't
-	# boot anymore to Linux until it was reflashed with ap51-flash.
-	local next_boot_part="1"
-	case "$(board_name)" in
-	plasmacloud,pax1800-v1|\
-	plasmacloud,pax1800-v2)
-		primary_kernel_mtd=9
-		;;
-	*)
-		echo "failed to detect primary kernel mtd partition for board"
-		return 1
-		;;
-	esac
-	[ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-
-	local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
-	local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
-	# rootfs without EOF marker
-	rootfs_length=$((rootfs_length-4))
-
-	local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
-	# md5 checksum of rootfs with EOF marker
-	local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
-
-	#
-	# add tar support to get_image() to use default_do_upgrade() instead?
-	#
-
-	# take care of restoring a saved config
-	[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
-
-	mtd -q erase inactive
-	tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
-	tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
-
-	platform_post_upgrade_sanity_check "kernel" "mtd${kernel_mtd}" $kernel_md5 0 $kernel_length || return 1
-	platform_post_upgrade_sanity_check "rootfs" "mtd${kernel_mtd}" $rootfs_md5 $kernel_length $rootfs_length || return 1
-
-	# prepare new u-boot env
-	if [ "$next_boot_part" = "1" ]; then
-		echo "bootseq 1,2" > $setenv_script
-	else
-		echo "bootseq 2,1" > $setenv_script
-	fi
-
-	printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
-	printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
-	printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
-	printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
-
-	printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
-	printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
-	printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
-	printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
-
-	# store u-boot env changes
-	mkdir -p /var/lock
-	fw_setenv -s $setenv_script || {
-		echo "failed to update U-Boot environment"
-		return 1
-	}
-}

feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh

@@ -1,8 +1,7 @@
 . /lib/functions/system.sh
 
-
+RAMFS_COPY_BIN='fw_printenv fw_setenv'
-RAMFS_COPY_BIN='fw_setenv'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
-RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock /tmp/downgrade'
 
 qca_do_upgrade() {
         local tar_file="$1"
@@ -50,22 +49,6 @@ do_flash_emmc() {
 	tar Oxf $tar_file ${board_dir}/$part | dd of=${emmcblock}
 }
 
-emmc_do_upgrade_cig() {
-        local tar_file="$1"
-
-        local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-        board_dir=${board_dir%/}
-	
-        do_flash_emmc $tar_file '0:HLOS_1' $board_dir kernel
-        do_flash_emmc $tar_file 'rootfs_1' $board_dir root
-
-        local emmcblock="$(find_mmc_part "rootfs_data")"
-        if [ -e "$emmcblock" ]; then
-                mkfs.ext4 -F "$emmcblock"
-        fi
-}
-
-
 emmc_do_upgrade() {
 	local tar_file="$1"
 
@@ -85,7 +68,6 @@ platform_check_image() {
 	board=$(board_name)
 	case $board in
 	cig,wf188|\
-	cig,wf660a|\
 	cig,wf188n|\
 	cig,wf194c|\
 	cig,wf194c4|\
@@ -93,29 +75,18 @@ platform_check_image() {
 	cybertan,eww622-a1|\
 	glinet,ax1800|\
 	glinet,axt1800|\
-	indio,um-310ax-v1|\
-	indio,um-510axp-v1|\
-	indio,um-510axm-v1|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
 	edgecore,eap102|\
 	edgecore,eap104|\
-	liteon,wpx8324|\
 	edgecore,eap106|\
 	hfcl,ion4xi|\
-	hfcl,ion4x|\
-	hfcl,ion4x_2|\
 	hfcl,ion4xe|\
-	muxi,ap3220l|\
-	plasmacloud,pax1800-v1|\
-	plasmacloud,pax1800-v2|\
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
-	yuncore,fap650|\
 	motorola,q14|\
-	muxi,ap3220l|\
 	qcom,ipq6018-cp01|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
@@ -136,9 +107,6 @@ platform_do_upgrade() {
 	cig,wf188)
 		qca_do_upgrade $1
 		;;
-	cig,wf660a)
-		emmc_do_upgrade_cig $1
-		;;
 	motorola,q14)
 		emmc_do_upgrade $1
 		;;
@@ -147,11 +115,9 @@ platform_do_upgrade() {
 	cig,wf194c4|\
 	cig,wf196|\
 	cybertan,eww622-a1|\
+	edgecore,eap104|\
 	glinet,ax1800|\
 	glinet,axt1800|\
-	indio,um-310ax-v1|\
-	indio,um-510axp-v1|\
-	indio,um-510axm-v1|\
 	qcom,ipq6018-cp01|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
@@ -159,16 +125,11 @@ platform_do_upgrade() {
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	yuncore,ax840|\
-	yuncore,fap650|\
 	tplink,ex447|\
-	tplink,ex227|\
+	tplink,ex227)	
-	meshpp,s618-cp03|\
-	meshpp,s618-cp01)
 		nand_upgrade_tar "$1"
 		;;
 	hfcl,ion4xi|\
-	hfcl,ion4x|\
-	hfcl,ion4x_2|\
 	hfcl,ion4xe)
 		if grep -q rootfs_1 /proc/cmdline; then
 			CI_UBIPART="rootfs"
@@ -179,8 +140,6 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
-	edgecore,eap104|\
-	liteon,wpx8324|\
 	edgecore,eap106)
 		CI_UBIPART="rootfs1"
 		[ "$(find_mtd_chardev rootfs)" ] && CI_UBIPART="rootfs"
@@ -191,11 +150,7 @@ platform_do_upgrade() {
 		if [ "$(find_mtd_chardev rootfs)" ]; then
 			CI_UBIPART="rootfs"
 		else
-			if [ -e /tmp/downgrade ]; then
+			if grep -q rootfs1 /proc/cmdline; then
-				CI_UBIPART="rootfs1"
-				fw_setenv active 1 || exit 1
-				fw_setenv upgrade_available 0 || exit 1
-			elif grep -q rootfs1 /proc/cmdline; then
 				CI_UBIPART="rootfs2"
 				fw_setenv active 2 || exit 1
 			else
@@ -205,10 +160,5 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
-	plasmacloud,pax1800-v1|\
-	plasmacloud,pax1800-v2)
-		PART_NAME="inactive"
-		platform_do_upgrade_dualboot_datachk "$1"
-		;;
 	esac
 }

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-liteon-wpx8324.dts

@@ -1,23 +0,0 @@
-/*
- * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-liteon-wpx8324.dts"
-
-/ {
-	pmuv8: pmu {
-		compatible = "arm,cortex-a7-pmu";
-	};
-};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-muxi-ap3220l.dts

@@ -1,23 +0,0 @@
-/*
- * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-muxi-ap3220l.dts"
-
-/ {
-	pmuv8: pmu {
-		compatible = "arm,cortex-a7-pmu";
-	};
-};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-cig-wf660a.dts

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-hfcl-ion4x.dts

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-hfcl-ion4x.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-hfcl-ion4x_2.dts

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-hfcl-ion4x_2.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-indio-um-310ax-v1.dts

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-indio-um-310ax-v1.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-indio-um-510axm-v1.dts

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-indio-um-510axm-v1.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-indio-um-510axp-v1.dts

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-indio-um-510axp-v1.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-meshpp-s618-cp01.dts

@@ -1,2 +0,0 @@
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp01.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-meshpp-s618-cp03.dts

@@ -1,2 +0,0 @@
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp03.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-pax1800-v1.dts

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v1.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-pax1800-v2.dts

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v2.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-yuncore-fap650.dts

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-yuncore-fap650.dts"
-#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-liteon-wpx8324.dts

@@ -1,812 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq5018.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Liteon WPX8324";
-	compatible = "liteon,wpx8324", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		/*serial1 = &blsp1_uart2;*/
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		bootargs-append = " swiotlb=1";
-	#else
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	#endif
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*                   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |           8MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D300000  |          15MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E400000  |          15MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4F300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F400000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4500000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xF00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0xF00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
-			no-map;
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
-			no-map;
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-		};
-	#else
-	/*                 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          14MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D400000  |           2MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D600000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E600000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E700000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E800000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4ED00000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4FD00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4FE00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4FF00000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x5400000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xE00000>;
-		};
-
-		m3_dump: m3_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D400000 {
-			no-map;
-			reg = <0x0 0x4D400000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
-			no-map;
-			reg = <0x0 0x4D600000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
-			no-map;
-			reg = <0x0 0x4E600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
-			no-map;
-			reg = <0x0 0x4E700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
-			no-map;
-			reg = <0x0 0x4E800000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4ED00000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
-			no-map;
-			reg = <0x0 0x4FD00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
-			no-map;
-			reg = <0x0 0x4FE00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
-			no-map;
-			reg = <0x0 0x4FF00000 0x0 0x500000>;
-		};
-
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		spi_2: spi@78b7000 { /* BLSP1 QUP2 */
-			pinctrl-0 = <&blsp2_spi0_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			tpm0: slb9670@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <1>;	/* CE1 */
-				compatible = "infineon,slb9670";
-				linux,modalias = "slb9670", "slb9670a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
- 			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 26 0>;
-
-			ethernet-phy@0 {
-				reg = <28>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x1c>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-		wifi0: wifi@c000000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			mdio-bus = <&mdio1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		qcom,test@0 {
-			status = "ok";
-		};
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_blue: led@19 {
-			label = "blue:uplink";
-			gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		led_orange: led@18 {
-			label = "orange:wifi2";
-			gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		led_green: led@39 {
-			label = "green:wifi5";
-			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
-	pinctrl-names = "default";
-
-	leds_pins: leds_pins {
-		led_blue {
-			pins = "gpio19";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_orange {
-			pins = "gpio18";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_green {
-			pins = "gpio39";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	blsp2_spi0_pins: blsp2_spi0_pins {
-		mux {
-			pins = "gpio31", "gpio32", "gpio33", "gpio34";
-			function = "blsp2_spi0";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_0 {
-			pins = "gpio7";
-			function = "qspi0";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_1 {
-			pins = "gpio6";
-			function = "qspi1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_2 {
-			pins = "gpio5";
-			function = "qspi2";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_3 {
-			pins = "gpio4";
-			function = "qspi3";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_led_pins: phy_led_pins {
-		gephy_led_pin {
-			pins = "gpio18", "gpio19", "gpio39";
-			/* function = "led0"; */
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		wps_button {
-			pins = "gpio29";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&usb3 {
-	status = "ok";
-	device-power-gpio = <&tlmm 28 0>;
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	status = "disabled";
-	perst-gpio = <&tlmm 18 1>;
-};
-
-&pcie_x2 {
-	status = "disabled";
-	perst-gpio = <&tlmm 15 1>;
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&pcie_x1phy {
-	status = "disabled";
-};
-
-&pcie_x2phy {
-	status = "disabled";
-};
-
-&pcie_x1_rp {
-        status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-        status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};
-
-&qfprom {
-	status = "ok";
-};
-
-&tsens {
-	status = "ok";
-};
-
-&qcom_q6v5_wcss {
-	qcom,multipd_arch;
-	memory-region = <&q6_mem_regions>;
-	qcom,share_bootargs;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	/* IPQ5018 */
-	q6v5_wcss_userpd1 {
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-			<&wcss_smp2p_in 9 0>,
-			<&wcss_smp2p_in 12 0>,
-			<&wcss_smp2p_in 11 0>;
-		interrupt-names ="fatal",
-			"ready",
-			"spawn_ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-			<&wcss_smp2p_out 9>,
-			<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-		qca,asid = <1>;
-		qca,auto-restart;
-		qca,int_radio;
-		#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-		#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-		#endif
-	};
-
-	/* QCN6122 6G */
-	q6v5_wcss_userpd2 {
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-			<&wcss_smp2p_in 17 0>,
-			<&wcss_smp2p_in 20 0>,
-			<&wcss_smp2p_in 19 0>;
-		interrupt-names ="fatal",
-			"ready",
-			"spawn_ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-			<&wcss_smp2p_out 17>,
-			<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-		qca,asid = <2>;
-		qca,auto-restart;
-		#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-		#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-		#endif
-	};
-
-	/* QCN6122 5G */
-	q6v5_wcss_userpd3 {
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-			<&wcss_smp2p_in 25 0>,
-			<&wcss_smp2p_in 28 0>,
-			<&wcss_smp2p_in 27 0>;
-		interrupt-names ="fatal",
-			"ready",
-			"spawn_ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-			<&wcss_smp2p_out 25>,
-			<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-		qca,asid = <3>;
-		qca,auto-restart;
-		#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-		#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-		#endif
-	};
-};
-
-&qgic_msi_0 {
-	status = "ok";
-};
-
-&qgic_msi_1 {
-	status = "ok";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4D400000>;
-	m3-dump-addr = <0x4D200000>;
-#endif
-	qcom,caldb-size = <0x200000>;
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4FF00000>;
-	m3-dump-addr = <0x4FD00000>;
-#endif
-	qcom,caldb-size = <0x500000>;
-	status = "ok";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-muxi-ap3220l.dts

@@ -1,891 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq5018.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "MUXI AP3220L";
-	compatible = "muxi,ap3220l", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		bootargs-append = " swiotlb=1";
-	#else
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	#endif
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*                   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |           8MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D300000  |          15MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E400000  |          15MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4F300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F400000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4500000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xF00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0xF00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
-			no-map;
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
-			no-map;
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-		};
-	#else
-	/*                 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          14MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D400000  |           2MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D600000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E600000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E700000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E800000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4ED00000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4FD00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4FE00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4FF00000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x5400000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xE00000>;
-		};
-
-		m3_dump: m3_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D400000 {
-			no-map;
-			reg = <0x0 0x4D400000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
-			no-map;
-			reg = <0x0 0x4D600000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
-			no-map;
-			reg = <0x0 0x4E600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
-			no-map;
-			reg = <0x0 0x4E700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
-			no-map;
-			reg = <0x0 0x4E800000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4ED00000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
-			no-map;
-			reg = <0x0 0x4FD00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
-			no-map;
-			reg = <0x0 0x4FE00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
-			no-map;
-			reg = <0x0 0x4FF00000 0x0 0x500000>;
-		};
-
-	#endif
-	};
-
-	soc {
-
-		blsp1_uart1: serial@78af000 {
-			pinctrl-0 = <&blsp0_uart_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			pinctrl-0 = <&blsp1_uart_pins>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins &phy_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-			ess-switch@0x39c00000 {
-				compatible = "qcom,ess-switch-ipq50xx";
-				device_id = <0>;
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-					};
-					port@1 {
-						port_id = <2>;
-						forced-speed = <1000>;
-						forced-duplex = <1>;
-					};
-				};
-				/*
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				*/
-			};
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca83xx";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio1>;
-				reset_gpio = <0x27>;
-				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x1e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-				qca,ar8327-initvals = <
-						0x00004 0x7600000   /* PAD0_MODE */
-						0x00008 0x1000000   /* PAD5_MODE */
-						0x0000c 0x80        /* PAD6_MODE */
-						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
-						0x000e4 0xaa545     /* MAC_POWER_SEL */
-						0x000e0 0xc74164de  /* SGMII_CTRL */
-						0x0007c 0x4e        /* PORT0_STATUS */
-						0x00094 0x4e        /* PORT6_STATUS */
-				>;
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <3>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <4>;
-						phy_address = <3>;
-					};
-				};
-			};
-		};
-
-		ess-uniphy@98000 {
-			status = "disabled";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <3>;
-			mdio-bus = <&mdio1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		qcom,test@0 {
-			status = "ok";
-		};
-
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	//pinctrl-0 = <&phy_led_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp1_uart_pins: blsp1_uart_pins {
-		blsp1_uart_rx_tx {
-			pins = "gpio23", "gpio25";
-			function = "blsp1_uart2";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-				pins = "gpio9";
-				function = "qspi_clk";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		qspi_cs {
-				pins = "gpio8";
-				function = "qspi_cs";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		qspi_data_0 {
-				pins = "gpio7";
-				function = "qspi0";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		qspi_data_1 {
-				pins = "gpio6";
-				function = "qspi1";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		qspi_data_2 {
-				pins = "gpio5";
-				function = "qspi2";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		qspi_data_3 {
-				pins = "gpio4";
-				function = "qspi3";
-				drive-strength = <8>;
-				bias-disable;
-			};
-	};
-
-	phy_pins: phy_pins {
-		phy_intr {
-			pins = "gpio29";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-			bias-disable;
-		};
-		phy_reset {
-			pins = "gpio39";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-			output-low;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_led_pins: phy_led_pins {
-		gephy_led_pin {
-			//pins = "gpio46";
-			function = "led0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		led_pwr {
-			pins = "gpio26";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_2g {
-			pins = "gpio31";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_5g {
-			pins = "gpio33";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset_button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-			led_power: led_pwr {
-				label = "green:led_pwr";
-				gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
-				default-state = "on";
-				linux,default-trigger = "led_pwr";
-			};
-
-			led_2g {
-				label = "green:wifi2";
-				gpio = <&tlmm 33 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led_5g {
-				label = "green:wifi5";
-				gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-	};
-};
-
-&usb3 {
-	status = "ok";
-	device-power-gpio = <&tlmm 30 1>;
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	status = "disabled";
-	perst-gpio = <&tlmm 18 1>;
-};
-
-&pcie_x2 {
-	status = "disabled";
-	perst-gpio = <&tlmm 15 1>;
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&pcie_x1phy {
-	status = "disabled";
-};
-
-&pcie_x2phy {
-	status = "disabled";
-};
-
-&pcie_x1_rp {
-        status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-        status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};
-
-&qfprom {
-	status = "ok";
-};
-
-&tsens {
-	status = "ok";
-};
-
-&qcom_q6v5_wcss {
-	qcom,multipd_arch;
-	memory-region = <&q6_mem_regions>;
-	qcom,share_bootargs;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x2 0x4 0x2 0xF 0x0 0x0>;
-
-	/* IPQ5018 */
-	q6v5_wcss_userpd1 {
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-			<&wcss_smp2p_in 9 0>,
-			<&wcss_smp2p_in 12 0>,
-			<&wcss_smp2p_in 11 0>;
-		interrupt-names ="fatal",
-			"ready",
-			"spawn_ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-			<&wcss_smp2p_out 9>,
-			<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-		qca,asid = <1>;
-		qca,auto-restart;
-		qca,int_radio;
-		#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-		#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-		#endif
-	};
-
-	/* QCN6122 6G */
-	q6v5_wcss_userpd2 {
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-			<&wcss_smp2p_in 17 0>,
-			<&wcss_smp2p_in 20 0>,
-			<&wcss_smp2p_in 19 0>;
-		interrupt-names ="fatal",
-			"ready",
-			"spawn_ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-			<&wcss_smp2p_out 17>,
-			<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-		qca,asid = <2>;
-		qca,auto-restart;
-		#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-		#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-		#endif
-	};
-
-	/* QCN6122 5G */
-	q6v5_wcss_userpd3 {
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-			<&wcss_smp2p_in 25 0>,
-			<&wcss_smp2p_in 28 0>,
-			<&wcss_smp2p_in 27 0>;
-		interrupt-names ="fatal",
-			"ready",
-			"spawn_ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-			<&wcss_smp2p_out 25>,
-			<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-		qca,asid = <3>;
-		qca,auto-restart;
-		#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-		#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-		#endif
-	};
-};
-
-&qgic_msi_0 {
-	status = "ok";
-};
-
-&qgic_msi_1 {
-	status = "ok";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4D400000>;
-	m3-dump-addr = <0x4D200000>;
-#endif
-	qcom,caldb-size = <0x200000>;
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 6G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-	qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4E800000>;
-	m3-dump-addr = <0x4E600000>;
-#endif
-	qcom,caldb-size = <0x500000>;
-	status = "disabled";
-};
-
-&wifi2 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4FF00000>;
-	m3-dump-addr = <0x4FD00000>;
-#endif
-	qcom,caldb-size = <0x500000>;
-	status = "ok";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a-cp01.dtsi

@@ -1,590 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	compatible = "cig,wf660a", "qcom,ipq6018-cp01", "qcom,ipq6018";
-	interrupt-parent = <&intc>;
-	qcom,msm-id = <0x192 0x0>, <0x193 0x0>;
-
-	aliases {
-		serial0 = &blsp1_uart3;
-		serial1 = &blsp1_uart2;
-		sdhc1 = &sdhc_1;
-		/*
-		 * Aliases as required by u-boot
-		 * to patch MAC addresses
-		 */
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-		ethernet2 = "/soc/dp3";
-		ethernet3 = "/soc/dp4";
-		ethernet4 = "/soc/dp5";
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-		bootargs-append = " swiotlb=1";
-#else
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-#endif
-	};
-
-};
-
-&tlmm {
-	pinctrl-0 = <&sd_ldo_pins>;
-	pinctrl-names = "default";
-
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	sd_ldo_pins: sd_ldo_pins {
-		mux {
-			pins = "gpio66";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-			output-low;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_1_pins: spi_1_pins {
-		mux {
-			pins = "gpio69", "gpio71", "gpio72";
-			function = "blsp1_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		spi_cs {
-			pins = "gpio70";
-			function = "blsp1_spi";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		quartz_interrupt {
-			pins = "gpio78";
-			function = "gpio";
-			input;
-			bias-disable;
-		};
-		quartz_reset {
-			pins = "gpio79";
-			function = "gpio";
-			output-low;
-			bias-disable;
-		};
-
-	};
-
-	qpic_pins: qpic_pins {
-		data_0 {
-			pins = "gpio15";
-			function = "qpic_pad0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_1 {
-			pins = "gpio12";
-			function = "qpic_pad1";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_2 {
-			pins = "gpio13";
-			function = "qpic_pad2";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_3 {
-			pins = "gpio14";
-			function = "qpic_pad3";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_4 {
-			pins = "gpio5";
-			function = "qpic_pad4";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_5 {
-			pins = "gpio6";
-			function = "qpic_pad5";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_6 {
-			pins = "gpio7";
-			function = "qpic_pad6";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_7 {
-			pins = "gpio8";
-			function = "qpic_pad7";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		qpic_pad {
-			pins = "gpio1", "gpio3", "gpio4",
-			       "gpio10", "gpio11", "gpio17";
-			function = "qpic_pad";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	sd_pins: sd_pins {
-		mux {
-			pins = "gpio62";
-			function = "sd_card";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	extcon_usb_pins: extcon_usb_pins {
-		mux {
-			pins = "gpio26";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		wps_button {
-			pins = "gpio9";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		reset_button {
-			pins = "gpio19";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-		mux_3 {
-			pins = "gpio77";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_usb0 {
-			pins = "gpio50";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	hsuart_pins: hsuart_pins {
-		mux {
-			pins = "gpio71", "gpio72";
-			function = "blsp1_uart";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	btcoex_pins: btcoex_pins {
-		mux_0 {
-			pins = "gpio51";
-			function = "pta1_1";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-		mux_1 {
-			pins = "gpio53";
-			function = "pta1_0";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-		mux_2 {
-			pins = "gpio52";
-			function = "pta1_2";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-	};
-	pwm_pins: pwm_pinmux {
-        mux_1 {
-                pins = "gpio22";
-                function = "pwm02";
-                drive-strength = <8>;
-        };
-		mux_2 {
-			pins = "gpio23";
-            function = "pwm12";
-            drive-strength = <8>;
-		};
-		mux_3 {
-			pins = "gpio24";
-            function = "pwm22";
-            drive-strength = <8>;
-		};
-		
-        };
-};
-
-&soc {
-	pwm {
-                pinctrl-0 = <&pwm_pins>;
-                pinctrl-names = "default";
-                used-pwm-indices = <1>, <1>, <1>, <0>;
-                status = "ok";
-        };
-	extcon_usb: extcon_usb {
-		pinctrl-0 = <&extcon_usb_pins>;
-		pinctrl-names = "default";
-		id-gpio = <&tlmm 26 GPIO_ACTIVE_LOW>;
-		status = "ok";
-	};
-
-	mdio: mdio@90000 {
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0 &tlmm 77 1>;
-		status = "ok";
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-		phy2: ethernet-phy@2 {
-			reg = <2>;
-		};
-		phy3: ethernet-phy@3 {
-			reg = <3>;
-		};
-		phy4: ethernet-phy@4 {
-			reg = <0x1c>;
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <1>;
-		reg = <0x3a001000 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <0>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <2>;
-		reg = <0x3a001200 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <1>;
-		phy-mode = "sgmii";
-	};
-
-	dp3 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <3>;
-		reg = <0x3a001400 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <2>;
-		phy-mode = "sgmii";
-	};
-
-	dp4 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <4>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <3>;
-		phy-mode = "sgmii";
-	};
-
-	dp5 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <5>;
-		reg = <0x3a001800 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <28>;
-		phy-mode = "sgmii";
-	};
-
-	nss-macsec0 {
-		compatible = "qcom,nss-macsec";
-		phy_addr = <0x1c>;
-		phy_access_mode = <0>;
-		mdiobus = <&mdio>;
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-		switch_lan_bmp = <0x1e>; /* lan port bitmap */
-		switch_wan_bmp = <0x20>; /* wan port bitmap */
-		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
-		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-		qcom,port_phyinfo {
-			port@0 {
-				port_id = <1>;
-				phy_address = <0>;
-			};
-			port@1 {
-				port_id = <2>;
-				phy_address = <1>;
-			};
-			port@2 {
-				port_id = <3>;
-				phy_address = <2>;
-			};
-			port@3 {
-				port_id = <4>;
-				phy_address = <3>;
-			};
-			port@4 {
-				port_id = <5>;
-				phy_address = <0x1c>;
-				port_mac_sel = "QGMAC_PORT";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-		reset {
-			label = "reset";
-			linux,code = <KEY_POWER>;
-			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led@35 {
-			label = "led_5g";
-			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_5g";
-			default-state = "off";
-		};
-		led@37 {
-			label = "led_2g";
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_2g";
-			default-state = "off";
-		};
-		led@50 {
-			label = "led_usb0";
-			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "usb-host";
-			default-state = "off";
-		};
-	};
-
-i2c_4: i2c@78b9000 {
-	compatible = "qcom,i2c-qup-v2.2.1";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x78b9000 0x600>;
-	interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&gcc GCC_BLSP1_AHB_CLK>,<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
-	clock-names = "iface", "core";
-	clock-frequency  = <100000>;
-	dmas = <&blsp_dma 21>, <&blsp_dma 20>;
-	dma-names = "rx", "tx";
-	status = "disabled";
-};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&hsuart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_1_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	quartz-reset-gpio = <&tlmm 79 1>;
-	status = "disabled";
-	spidev1: spi@1 {
-		compatible = "qca,spidev";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-	};
-};
-
-
-&qpic_bam {
-	status = "ok";
-};
-
-&nand {
-	pinctrl-0 = <&qpic_pins>;
-	pinctrl-names = "default";
-	status = "disable";
-};
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&qusb_phy_0 {
-	status = "ok";
-};
-
-&qusb_phy_1 {
-	status = "ok";
-};
-
-&usb2 {
-	status = "ok";
-};
-
-&usb3 {
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-&pcie_phy {
-	status = "ok";
-};
-
-&pcie0 {
-#if defined(__CNSS2__)
-	status = "ok";
-#endif
-};
-
-&qpic_lcd {
-	status = "ok";
-};
-
-&qpic_lcd_panel {
-	status = "ok";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a.dts

@@ -1,120 +0,0 @@
-/dts-v1/;
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018-cig-wf660a-cp01.dtsi"
-#include "qcom-ipq6018-rpm-regulator.dtsi"
-#include "qcom-ipq6018-cpr-regulator.dtsi"
-#include "qcom-ipq6018-cp-cpu.dtsi"
-
-/ {
-	model = "Cigtech WF-660a";
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	i2c_0_pins: i2c_0_pins {
-		mux {
-			pins = "gpio69", "gpio70";
-			function = "blsp1_i2c";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-	i2c_1_pins: i2c_1_pins {
-		mux {
-			pins = "gpio42", "gpio43";
-			function = "blsp2_i2c";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-	i2c_4_pins: i2c_4_pins {
-		mux {
-			pins = "gpio55", "gpio56";
-			function = "blsp4_i2c";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};	
-	
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-
-&i2c_1 {
-	pinctrl-0 = <&i2c_1_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&i2c_4 {
-	pinctrl-0 = <&i2c_4_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&sdhc_1 {
-	status = "ok";
-};
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-&qseecom {
-	mem-start = <0x49B00000>;
-	mem-size = <0x600000>;
-	status = "ok";
-};
-#endif

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-hfcl-ion4x.dts

@@ -1,155 +0,0 @@
-/dts-v1/;
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018-cp01-hfcl.dtsi"
-#include "qcom-ipq6018-rpm-regulator.dtsi"
-#include "qcom-ipq6018-cpr-regulator.dtsi"
-#include "qcom-ipq6018-cp-cpu.dtsi"
-
-/ {
-	model = "HFCL ION4X";
-	compatible = "hfcl,ion4x", "qcom,ipq6018-cp01", "qcom,ipq6018";
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	i2c_1_pins: i2c_1_pins {
-		mux {
-			pins = "gpio42", "gpio43";
-			function = "blsp2_i2c";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-	
-	i2c_2_pins: i2c_2_pins {
-                mux {
-                        pins = "gpio55", "gpio56";
-                        function = "blsp4_i2c";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-        };
-};
-
-&i2c_1 {
-	pinctrl-0 = <&i2c_1_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-
-	lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-		status = "okay";
-	};
-};
-
-&i2c_2 {
-        pinctrl-0 = <&i2c_2_pins>;
-        pinctrl-names = "default";
-        status = "ok";
-};
-
-&sdhc_2 {
-	pinctrl-0 = <&sd_pins>;
-	pinctrl-names = "default";
-	cd-gpios = <&tlmm 62 1>;
-	sd-ldo-gpios = <&tlmm 66 0>;
-	vqmmc-supply = <&ipq6018_l2_corner>;
-	status = "ok";
-};
-
-&soc {
-        leds {
-                compatible = "gpio-leds";
-                pinctrl-0 = <&leds_pins>;
-                pinctrl-names = "default";
-
-                led@60 {
-                        label = "blue:wifi5";
-                        gpios = <&tlmm 60 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_5g";
-                        default-state = "off";
-                };
-                led@61 {
-                        label = "blue:wifi2";
-                        gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_2g";
-                        default-state = "off";
-                };
-        };
-};
-
-&tlmm {
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio60";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio61";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-&qseecom {
-	mem-start = <0x49B00000>;
-	mem-size = <0x600000>;
-	status = "ok";
-};
-#endif

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-hfcl-ion4x_2.dts

@@ -1,155 +0,0 @@
-/dts-v1/;
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018-cp01-hfcl.dtsi"
-#include "qcom-ipq6018-rpm-regulator.dtsi"
-#include "qcom-ipq6018-cpr-regulator.dtsi"
-#include "qcom-ipq6018-cp-cpu.dtsi"
-
-/ {
-	model = "HFCL ION4X_2";
-	compatible = "hfcl,ion4x_2", "qcom,ipq6018-cp01", "qcom,ipq6018";
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	i2c_1_pins: i2c_1_pins {
-		mux {
-			pins = "gpio42", "gpio43";
-			function = "blsp2_i2c";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-	
-	i2c_2_pins: i2c_2_pins {
-                mux {
-                        pins = "gpio55", "gpio56";
-                        function = "blsp4_i2c";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-        };
-};
-
-&i2c_1 {
-	pinctrl-0 = <&i2c_1_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-
-	lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-		status = "okay";
-	};
-};
-
-&i2c_2 {
-        pinctrl-0 = <&i2c_2_pins>;
-        pinctrl-names = "default";
-        status = "ok";
-};
-
-&sdhc_2 {
-	pinctrl-0 = <&sd_pins>;
-	pinctrl-names = "default";
-	cd-gpios = <&tlmm 62 1>;
-	sd-ldo-gpios = <&tlmm 66 0>;
-	vqmmc-supply = <&ipq6018_l2_corner>;
-	status = "ok";
-};
-
-&soc {
-        leds {
-                compatible = "gpio-leds";
-                pinctrl-0 = <&leds_pins>;
-                pinctrl-names = "default";
-
-                led@60 {
-                        label = "blue:wifi5";
-                        gpios = <&tlmm 60 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_5g";
-                        default-state = "off";
-                };
-                led@61 {
-                        label = "blue:wifi2";
-                        gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_2g";
-                        default-state = "off";
-                };
-        };
-};
-
-&tlmm {
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio60";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio61";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-&qseecom {
-	mem-start = <0x49B00000>;
-	mem-size = <0x600000>;
-	status = "ok";
-};
-#endif

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-indio-um-310ax-v1.dts

@@ -1,379 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "qcom-ipq6018.dtsi"
-#include "qcom-ipq6018-rpm-regulator.dtsi"
-#include "qcom-ipq6018-cpr-regulator.dtsi"
-#include "qcom-ipq6018-cp-cpu.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Indio UM-310AX V1";
-	compatible = "indio,um-310ax-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
-
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp2";
-		ethernet1 = "/soc/dp1";
-
-		serial0 = &blsp1_uart3;
-		serial1 = &blsp1_uart2;
-
-		led-boot = &led_system;
-		led-failsafe = &led_system;
-		led-running = &led_system;
-		led-upgrade = &led_system;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	};
-
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	qpic_pins: qpic_pins {
-		data_0 {
-			pins = "gpio15";
-			function = "qpic_pad0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_1 {
-			pins = "gpio12";
-			function = "qpic_pad1";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_2 {
-			pins = "gpio13";
-			function = "qpic_pad2";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_3 {
-			pins = "gpio14";
-			function = "qpic_pad3";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_4 {
-			pins = "gpio5";
-			function = "qpic_pad4";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_5 {
-			pins = "gpio6";
-			function = "qpic_pad5";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_6 {
-			pins = "gpio7";
-			function = "qpic_pad6";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_7 {
-			pins = "gpio8";
-			function = "qpic_pad7";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qpic_pad {
-			pins = "gpio1",  "gpio3",  "gpio4",
-			       "gpio10", "gpio11", "gpio17";
-			function = "qpic_pad";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		rst_button {
-			pins = "gpio19";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	modem_power_pins {
-		mux {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_blue {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		led_green {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		led_red {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-	mdio: mdio@90000 {
-		status = "ok";
-
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0>;
-
-		ethernet-phy@0 {
-			reg = <0x03>;
-		};
-
-		ethernet-phy@1 {
-			reg = <0x04>;
-		};
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp =   <0x01>; /* cpu port bitmap */
-		switch_lan_bmp =   <0x10>; /* lan port bitmap */
-		switch_wan_bmp =   <0x20>; /* wan port bitmap */
-		switch_inner_bmp = <0x80>; /*inner port bitmap*/
-		switch_mac_mode =  <0x00>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-		qcom,port_phyinfo {
-			port@3 {
-				port_id = <0x04>;
-				phy_address = <0x03>;
-			};
-
-			port@4 {
-				port_id = <0x05>;
-				phy_address = <0x04>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <0x04>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0x00>;
-		local-mac-address = [00 00 00 00 00 00];
-		qcom,link-poll = <0x01>;
-		qcom,phy-mdio-addr = <0x03>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <0x05>;
-		reg = <0x3a001800 0x200>;
-		qcom,mactype = <0x00>;
-		local-mac-address = [00 00 00 00 00 00];
-		qcom,link-poll = <0x01>;
-		qcom,phy-mdio-addr = <0x04>;
-		phy-mode = "sgmii";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_system: system {
-			label = "green:system";
-			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "blue:wlan2g";
-			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "red:wlan5g";
-			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&nand {
-	pinctrl-0 = <&qpic_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-&cpu0_opp_table {
-	compatible = "operating-points-v2";
-	opp-shared;
-
-	opp03 {
-		opp-hz = /bits/ 64 <1200000000>;
-		opp-microvolt = <3>;
-		clock-latency-ns = <200000>;
-	};
-
-	/delete-node/ opp04;
-	/delete-node/ opp05;
-	/delete-node/ opp06;
-};
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-&qseecom {
-	mem-start = <0x49B00000>;
-	mem-size = <0x600000>;
-	status = "ok";
-};
-#endif
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&qusb_phy_0 {
-	status = "ok";
-};
-
-&qusb_phy_1 {
-	status = "ok";
-};
-
-&usb2 {
-	status = "ok";
-};
-
-&usb3 {
-	status = "ok";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-indio-um-510axm-v1.dts

@@ -1,379 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "qcom-ipq6018.dtsi"
-#include "qcom-ipq6018-rpm-regulator.dtsi"
-#include "qcom-ipq6018-cpr-regulator.dtsi"
-#include "qcom-ipq6018-cp-cpu.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Indio UM-510AXM V1";
-	compatible = "indio,um-510axm-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
-
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp2";
-		ethernet1 = "/soc/dp1";
-
-		serial0 = &blsp1_uart3;
-		serial1 = &blsp1_uart2;
-
-		led-boot = &led_system;
-		led-failsafe = &led_system;
-		led-running = &led_system;
-		led-upgrade = &led_system;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	};
-
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	qpic_pins: qpic_pins {
-		data_0 {
-			pins = "gpio15";
-			function = "qpic_pad0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_1 {
-			pins = "gpio12";
-			function = "qpic_pad1";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_2 {
-			pins = "gpio13";
-			function = "qpic_pad2";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_3 {
-			pins = "gpio14";
-			function = "qpic_pad3";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_4 {
-			pins = "gpio5";
-			function = "qpic_pad4";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_5 {
-			pins = "gpio6";
-			function = "qpic_pad5";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_6 {
-			pins = "gpio7";
-			function = "qpic_pad6";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_7 {
-			pins = "gpio8";
-			function = "qpic_pad7";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qpic_pad {
-			pins = "gpio1",  "gpio3",  "gpio4",
-			       "gpio10", "gpio11", "gpio17";
-			function = "qpic_pad";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		rst_button {
-			pins = "gpio19";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	modem_power_pins {
-		mux {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_blue {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		led_green {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		led_red {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-	mdio: mdio@90000 {
-		status = "ok";
-
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0>;
-
-		ethernet-phy@0 {
-			reg = <0x03>;
-		};
-
-		ethernet-phy@1 {
-			reg = <0x04>;
-		};
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp =   <0x01>; /* cpu port bitmap */
-		switch_lan_bmp =   <0x10>; /* lan port bitmap */
-		switch_wan_bmp =   <0x20>; /* wan port bitmap */
-		switch_inner_bmp = <0x80>; /*inner port bitmap*/
-		switch_mac_mode =  <0x00>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-		qcom,port_phyinfo {
-			port@3 {
-				port_id = <0x04>;
-				phy_address = <0x03>;
-			};
-
-			port@4 {
-				port_id = <0x05>;
-				phy_address = <0x04>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <0x04>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0x00>;
-		local-mac-address = [00 00 00 00 00 00];
-		qcom,link-poll = <0x01>;
-		qcom,phy-mdio-addr = <0x03>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <0x05>;
-		reg = <0x3a001800 0x200>;
-		qcom,mactype = <0x00>;
-		local-mac-address = [00 00 00 00 00 00];
-		qcom,link-poll = <0x01>;
-		qcom,phy-mdio-addr = <0x04>;
-		phy-mode = "sgmii";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_system: system {
-			label = "green:system";
-			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "blue:wlan2g";
-			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "red:wlan5g";
-			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&nand {
-	pinctrl-0 = <&qpic_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-&cpu0_opp_table {
-	compatible = "operating-points-v2";
-	opp-shared;
-
-	opp03 {
-		opp-hz = /bits/ 64 <1200000000>;
-		opp-microvolt = <3>;
-		clock-latency-ns = <200000>;
-	};
-
-	/delete-node/ opp04;
-	/delete-node/ opp05;
-	/delete-node/ opp06;
-};
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-&qseecom {
-	mem-start = <0x49B00000>;
-	mem-size = <0x600000>;
-	status = "ok";
-};
-#endif
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&qusb_phy_0 {
-	status = "ok";
-};
-
-&qusb_phy_1 {
-	status = "ok";
-};
-
-&usb2 {
-	status = "ok";
-};
-
-&usb3 {
-	status = "ok";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-indio-um-510axp-v1.dts

@@ -1,379 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "qcom-ipq6018.dtsi"
-#include "qcom-ipq6018-rpm-regulator.dtsi"
-#include "qcom-ipq6018-cpr-regulator.dtsi"
-#include "qcom-ipq6018-cp-cpu.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Indio UM-510AXP V1";
-	compatible = "indio,um-510axp-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
-
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp2";
-		ethernet1 = "/soc/dp1";
-
-		serial0 = &blsp1_uart3;
-		serial1 = &blsp1_uart2;
-
-		led-boot = &led_system;
-		led-failsafe = &led_system;
-		led-running = &led_system;
-		led-upgrade = &led_system;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	};
-
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	qpic_pins: qpic_pins {
-		data_0 {
-			pins = "gpio15";
-			function = "qpic_pad0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_1 {
-			pins = "gpio12";
-			function = "qpic_pad1";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_2 {
-			pins = "gpio13";
-			function = "qpic_pad2";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_3 {
-			pins = "gpio14";
-			function = "qpic_pad3";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_4 {
-			pins = "gpio5";
-			function = "qpic_pad4";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_5 {
-			pins = "gpio6";
-			function = "qpic_pad5";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_6 {
-			pins = "gpio7";
-			function = "qpic_pad6";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		data_7 {
-			pins = "gpio8";
-			function = "qpic_pad7";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qpic_pad {
-			pins = "gpio1",  "gpio3",  "gpio4",
-			       "gpio10", "gpio11", "gpio17";
-			function = "qpic_pad";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		rst_button {
-			pins = "gpio19";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	modem_power_pins {
-		mux {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_blue {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		led_green {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		led_red {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-	mdio: mdio@90000 {
-		status = "ok";
-
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0>;
-
-		ethernet-phy@0 {
-			reg = <0x03>;
-		};
-
-		ethernet-phy@1 {
-			reg = <0x04>;
-		};
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp =   <0x01>; /* cpu port bitmap */
-		switch_lan_bmp =   <0x10>; /* lan port bitmap */
-		switch_wan_bmp =   <0x20>; /* wan port bitmap */
-		switch_inner_bmp = <0x80>; /*inner port bitmap*/
-		switch_mac_mode =  <0x00>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-		qcom,port_phyinfo {
-			port@3 {
-				port_id = <0x04>;
-				phy_address = <0x03>;
-			};
-
-			port@4 {
-				port_id = <0x05>;
-				phy_address = <0x04>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <0x04>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0x00>;
-		local-mac-address = [00 00 00 00 00 00];
-		qcom,link-poll = <0x01>;
-		qcom,phy-mdio-addr = <0x03>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <0x05>;
-		reg = <0x3a001800 0x200>;
-		qcom,mactype = <0x00>;
-		local-mac-address = [00 00 00 00 00 00];
-		qcom,link-poll = <0x01>;
-		qcom,phy-mdio-addr = <0x04>;
-		phy-mode = "sgmii";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_system: system {
-			label = "green:system";
-			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "blue:wlan2g";
-			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "red:wlan5g";
-			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&nand {
-	pinctrl-0 = <&qpic_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-&cpu0_opp_table {
-	compatible = "operating-points-v2";
-	opp-shared;
-
-	opp03 {
-		opp-hz = /bits/ 64 <1200000000>;
-		opp-microvolt = <3>;
-		clock-latency-ns = <200000>;
-	};
-
-	/delete-node/ opp04;
-	/delete-node/ opp05;
-	/delete-node/ opp06;
-};
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-&qseecom {
-	mem-start = <0x49B00000>;
-	mem-size = <0x600000>;
-	status = "ok";
-};
-#endif
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&qusb_phy_0 {
-	status = "ok";
-};
-
-&qusb_phy_1 {
-	status = "ok";
-};
-
-&usb2 {
-	status = "ok";
-};
-
-&usb3 {
-	status = "ok";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp01.dts

@@ -1,23 +0,0 @@
-/dts-v1/;
-/*
- * Copyright (c) 2022, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018-meshpp-s618.dtsi"
-
-/ {
-	model = "MeshPlusPlus, Inc. S618 CP01";
-	compatible = "meshpp,s618-cp01", "qcom,ipq6018-cp01", "qcom,ipq6018";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp03.dts

@@ -1,23 +0,0 @@
-/dts-v1/;
-/*
- * Copyright (c) 2022, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018-meshpp-s618.dtsi"
-
-/ {
-	model = "MeshPlusPlus, Inc. S618 CP01";
-	compatible = "meshpp,s618-cp03", "qcom,ipq6018-cp03", "qcom,ipq6018";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618.dtsi

@@ -1,789 +0,0 @@
-/*
- * Copyright (c) 2022, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	interrupt-parent = <&intc>;
-	qcom,msm-id = <0x1A5 0x0>;
-
-	aliases {
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-		ethernet2 = "/soc/dp3";
-		ethernet3 = "/soc/dp4";
-		ethernet4 = "/soc/dp5";
-
-		led-boot = &led_green;
-		led-running = &led_blue;
-		led-upgrade = &led_red;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-                bootargs-append = " console=ttyMSM0,115200n8 panic=10 ubi.mtd=nand root=mtd:ubi_rootfs rootfstype=squashfs swiotlb=1 rootwait";
-#else
-                bootargs-append = " console=ttyMSM0,115200n8 panic=10 ubi.mtd=nand root=mtd:ubi_rootfs rootfstype=squashfs swiotlb=1 coherent_pool=2M rootwait";
-#endif
-	};
-
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled only in default memory profile */
-	reserved-memory {
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-#endif
-		qcn9000_pcie0@50200000 {
-			no-map;
-			reg = <0x0 0x50200000 0x0 0x03700000>;
-		};
-
-		mhi_region0: dma_pool0@53900000 {
-			compatible = "shared-dma-pool";
-			no-map;
-			reg = <0x0 0x53900000 0x0 0x01800000>;
-		};
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&sd_ldo_pins &generic_gpios &pcie_pins>;
-	pinctrl-names = "default";
-
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	sd_ldo_pins: sd_ldo_pins {
-		mux {
-			pins = "gpio66";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-			output-low;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_1_pins: spi_1_pins {
-		mux {
-			pins = "gpio69", "gpio71", "gpio72";
-			function = "blsp1_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		spi_cs {
-			pins = "gpio70";
-			function = "blsp1_spi";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		quartz_interrupt {
-			pins = "gpio78";
-			function = "gpio";
-			input;
-			bias-disable;
-		};
-		quartz_reset {
-			pins = "gpio79";
-			function = "gpio";
-			output-low;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		switch_button {
-			pins = "gpio9";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		reset_button {
-			pins = "gpio19";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-		mux_3 {
-			pins = "gpio77";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		m2_1_regulator {
-			pins = "gpio29";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		m2_1_pwr_en {
-			pins = "gpio49";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		m2_1_reset_n {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_red: red {
-			pins = "gpio50";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_green: green {
-			pins = "gpio54";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_blue: blue {
-			pins = "gpio57";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	sd_pins: sd_pins {
-		mux_1 {
-			pins = "gpio62";
-			function = "sd_card";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio23";
-			function = "gpio";
-			drive_strength = <8>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	extcon_usb_pins: extcon_usb_pins {
-		mux {
-			pins = "gpio26";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	generic_gpios: generic_gpios {
-		gpio42 {
-			pins = "gpio42";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	pcie_pins: pcie_pins {
-		pcie0_enable {
-			pins = "gpio34";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-        i2c_2_pins: i2c_2_pins {
-                mux {
-                        pins = "gpio55", "gpio56";
-                        function = "gpio";
-                        drive-strength = <16>;
-                        bias-pull-up;
-                        input-enable;
-                };
-
-                mux_2 {
-                        pins = "gpio48";
-                        function = "gpio";
-                        drive_strength = <16>;
-                        output-high;
-                };
-
-                mux_3 {
-                        pins = "gpio73";
-                        function = "gpio";
-                        drive-stength = <16>;
-                        output-low;
-                };
-        };
-};
-
-&soc {
-	extcon_usb: extcon_usb {
-		pinctrl-0 = <&extcon_usb_pins>;
-		pinctrl-names = "default";
-		id-gpio = <&tlmm 26 GPIO_ACTIVE_LOW>;
-		status = "ok";
-	};
-
-	mdio0: mdio@90000 {
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0 &tlmm 77 1>;
-		status = "ok";
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-		phy2: ethernet-phy@2 {
-			reg = <2>;
-		};
-                phy3: ethernet-phy@3 {
-                        reg = <3>;
-                };
-                phy4: ethernet-phy@4 {
-                        reg = <4>;
-                };
-	};
-
-	ess0: ess-switch@3a000000 {
-		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-		switch_lan_bmp = <0x1e>; /* lan port bitmap */
-		switch_wan_bmp = <0x20>; /* wan port bitmap */
-		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
-		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-		qcom,port_phyinfo {
-			port@0 {
-				port_id = <1>;
-				phy_address = <0>;
-			};
-			port@1 {
-				port_id = <2>;
-				phy_address = <1>;
-			};
-			port@2 {
-				port_id = <3>;
-				phy_address = <2>;
-			};
-			port@3 {
-				port_id = <4>;
-				phy_address = <3>;
-			};
-			port@4 {
-				port_id = <5>;
-				phy_address = <4>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <1>;
-		reg = <0x3a001000 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <0>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <2>;
-		reg = <0x3a001200 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <1>;
-		phy-mode = "sgmii";
-	};
-
-	dp3 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <3>;
-		reg = <0x3a001400 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <2>;
-		phy-mode = "sgmii";
-	};
-
-	dp4 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <4>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <3>;
-		phy-mode = "sgmii";
-	};
-
-	dp5 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <5>;
-		reg = <0x3a001800 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <4>;
-		phy-mode = "sgmii";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led@29 {
-			label = "m2_1_regulator";
-			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		led@49 {
-			label = "m2_1_pwr_en";
-			gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		led@32 {
-			label = "m2_1_reset_n";
-			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "off";
-		};
-
-		led@50 {
-			label = "red";
-			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		led@54 {
-			label = "green";
-			gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		led@57 {
-			label = "blue";
-			gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-			default-state = "off";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		switch {
-			label = "switch";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	i2c_2: i2c@0 { /* i2c gpio */
-		pinctrl-0 = <&i2c_2_pins>;
-	        pinctrl-names = "default";
-		compatible = "i2c-gpio";
-		gpios = <&tlmm 56 0>, <&tlmm 55 0>;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <7>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "ok";
-	};
-
-	wifi3: wifi3@f00000 {
-		qcom,wlan-ramdump-dynamic = <0x400000>;
-		mhi,max-channels = <30>;
-		mhi,timeout = <10000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		qrtr_node_id = <0x20>;
-		qca,auto-restart;
-#ifdef __IPQ_MEM_PROFILE_512_MB__
-
-	      /* QCN9000 tgt-mem-mode=1 layout - 30MB
-	       * +=========+==============+=========+
-	       * |  Region | Start Offset |   Size  |
-	       * +---------+--------------+---------+
-	       * | BASE    |  0x4E400000  |   20MB  |
-	       * +---------+--------------+---------+
-	       * | M3 Dump |  0x4F800000  |   1MB   |
-	       * +---------+--------------+---------+
-	       * |  Caldb  |  0x4FA00000  |   8MB   |
-	       * +==================================+
-	       */
-
-		base-addr = <0x4E400000>;
-		m3-dump-addr = <0x4F800000>;
-		qcom,caldb-addr = <0x4FA00000>;
-#else
-
-	      /* QCN9000 tgt-mem-mode=0 layout - 55MB
-	       * +=========+==============+=========+
-	       * |  Region | Start Offset |   Size  |
-	       * +---------+--------------+---------+
-	       * | BASE    |  0x50200000  |   45MB  |
-	       * +---------+--------------+---------+
-	       * | M3 Dump |  0x52F00000  |   1MB   |
-	       * +---------+--------------+---------+
-	       * |  Caldb  |  0x53100000  |   8MB   |
-	       * +==================================+
-	       */
-
-		base-addr = <0x50200000>;
-		m3-dump-addr = <0x52F00000>;
-		qcom,caldb-addr = <0x53100000>;
-#endif
-		status = "ok";
-
-		mhi_channels {
-			mhi_chan@0 {
-				reg = <0>;
-				label = "LOOPBACK";
-				mhi,num-elements = <32>;
-				mhi,event-ring = <1>;
-				mhi,chan-dir = <1>;
-				mhi,data-type = <0>;
-				mhi,doorbell-mode = <2>;
-				mhi,ee = <0x14>;
-			};
-
-			mhi_chan@1 {
-				reg = <1>;
-				label = "LOOPBACK";
-				mhi,num-elements = <32>;
-				mhi,event-ring = <1>;
-				mhi,chan-dir = <2>;
-				mhi,data-type = <0>;
-				mhi,doorbell-mode = <2>;
-				mhi,ee = <0x14>;
-			};
-
-			mhi_chan@4 {
-				reg = <4>;
-				label = "DIAG";
-				mhi,num-elements = <32>;
-				mhi,event-ring = <1>;
-				mhi,chan-dir = <1>;
-				mhi,data-type = <0>;
-				mhi,doorbell-mode = <2>;
-				mhi,ee = <0x14>;
-			};
-
-			mhi_chan@5 {
-				reg = <5>;
-				label = "DIAG";
-				mhi,num-elements = <32>;
-				mhi,event-ring = <1>;
-				mhi,chan-dir = <2>;
-				mhi,data-type = <0>;
-				mhi,doorbell-mode = <2>;
-				mhi,ee = <0x14>;
-			};
-
-			mhi_chan@20 {
-				reg = <20>;
-				label = "IPCR";
-				mhi,num-elements = <32>;
-				mhi,event-ring = <1>;
-				mhi,chan-dir = <1>;
-				mhi,data-type = <1>;
-				mhi,doorbell-mode = <2>;
-				mhi,ee = <0x14>;
-				mhi,auto-start;
-			};
-
-			mhi_chan@21 {
-				reg = <21>;
-				label = "IPCR";
-				mhi,num-elements = <32>;
-				mhi,event-ring = <1>;
-				mhi,chan-dir = <2>;
-				mhi,data-type = <0>;
-				mhi,doorbell-mode = <2>;
-				mhi,ee = <0x14>;
-				mhi,auto-queue;
-				mhi,auto-start;
-			};
-		};
-
-		mhi_events {
-			mhi_event@0 {
-				mhi,num-elements = <32>;
-				mhi,intmod = <1>;
-				mhi,msi = <1>;
-				mhi,priority = <1>;
-				mhi,brstmode = <2>;
-				mhi,data-type = <1>;
-			};
-
-			mhi_event@1 {
-				mhi,num-elements = <256>;
-				mhi,intmod = <1>;
-				mhi,msi = <2>;
-				mhi,priority = <1>;
-				mhi,brstmode = <2>;
-			};
-		};
-
-		mhi_devices {
-			mhi_qrtr {
-				mhi,chan = "IPCR";
-				qcom,net-id = <0>;
-			};
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&qusb_phy_0 {
-	status = "ok";
-};
-
-&qusb_phy_1 {
-	status = "ok";
-};
-
-&usb2 {
-	status = "ok";
-};
-
-&usb3 {
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-&CPU0 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1200000  1100000
-		1608000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU1 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1200000  1100000
-		1608000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU2 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1200000  1100000
-		1608000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU3 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1200000  1100000
-		1608000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&wifi0 {
-        qcom,board_id = <0x10>;
-        status = "ok";
-};
-
-&pcie0 {
-	status = "ok";
-
-	pcie0_rp {
-		reg = <0 0 0 0 0>;
-		status = "ok";
-
-		mhi_0: qcom,mhi@0 {
-			reg = <0 0 0 0 0 >;
-			qrtr_instance_id = <0x20>;
-			qcom,board_id = <0xa4>;
-#if !defined(__IPQ_MEM_PROFILE_256_MB__)
-			memory-region = <&mhi_region0>;
-#endif
-		};
-	};
-};
-
-&pcie_phy {
-        status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v1.dts

@@ -1,23 +0,0 @@
-/dts-v1/;
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018-pax1800.dtsi"
-
-/ {
-	model = "Plasma Cloud PAX1800 v1";
-	compatible = "plasmacloud,pax1800-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v2.dts

@@ -1,23 +0,0 @@
-/dts-v1/;
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018-pax1800.dtsi"
-
-/ {
-	model = "Plasma Cloud PAX1800 v2";
-	compatible = "plasmacloud,pax1800-v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-pax1800.dtsi

@@ -1,315 +0,0 @@
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018.dtsi"
-#include "qcom-ipq6018-rpm-regulator.dtsi"
-#include "qcom-ipq6018-cpr-regulator.dtsi"
-#include "qcom-ipq6018-cp-cpu.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-
-	interrupt-parent = <&intc>;
-	qcom,msm-id = <0x1A5 0x0>;
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	};
-
-	aliases {
-		serial0 = &blsp1_uart3;
-		/*
-		 * Aliases as required by u-boot
-		 * to patch MAC addresses
-		 */
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_status_green;
-		led-failsafe = &led_status_green;
-		led-running = &led_status_green;
-		led-upgrade = &led_status_green;
-		led-uplink = &led_status_blue;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		status_red {
-			label = "red:status";
-			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-
-		led_status_green: status_green {
-			label = "green:status";
-			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_blue: status_blue {
-			label = "blue:status";
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		pinctrl-0 = <&watchdog_pins>;
-		pinctrl-names = "default";
-		gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		hw_margin_ms = <2000>;
-		always-running;
-	};
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio24";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: led_pinmux {
-		led_power_green {
-			pins = "gpio25";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_power_blue {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_power_red {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	watchdog_pins: watchdog_pinmux {
-		mux {
-			pins = "gpio67";
-			function = "gpio";
-			bias-none;
-			output-low;
-		};
-	};
-};
-
-&soc {
-	mdio@90000 {
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0>;
-		status = "ok";
-		phy0: ethernet-phy@0 {
-			reg = <3>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <4>;
-		};
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-		switch_lan_bmp = <0x08>; /* lan port bitmap */
-		switch_wan_bmp = <0x10>; /* wan port bitmap */
-		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
-		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-		qcom,port_phyinfo {
-			port@3 {
-				port_id = <3>;
-				phy_address = <4>;
-			};
-			port@4 {
-				port_id = <4>;
-				phy_address = <3>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <3>;
-		reg = <0x3a001400 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <4>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <4>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <3>;
-		phy-mode = "sgmii";
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-&qseecom {
-	mem-start = <0x49B00000>;
-	mem-size = <0x600000>;
-	status = "ok";
-};
-#endif
-
-&wifi0 {
-	status = "okay";
-	qcom,ath11k-calibration-variant = "PlasmaCloud-PAX1800";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-wallys-dr6018-v4.dts

@@ -82,24 +82,14 @@
 	 */
 
 /* TZAPP is enabled only in default memory profile */
-	reserved-memory {
 #if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
 		tzapp:tzapp@49B00000 {	/* TZAPPS */
 			no-map;
 			reg = <0x0 0x49B00000 0x0 0x00600000>;
 		};
-#endif
-		qcn9000_pcie0@50200000 {
-			no-map;
-			reg = <0x0 0x50200000 0x0 0x02D00000>;
-		};
-
-		mhi_region0: dma_pool0@52f00000 {
-			compatible = "shared-dma-pool";
-			no-map;
-			reg = <0x0 0x52F00000 0x0 0x01800000>;
-		};
 	};
+#endif
 };
 
 &tlmm {
@@ -500,49 +490,3 @@
 	//vqmmc-supply = <&ipq6018_l2_corner>;
 	status = "ok";
 };
-
-&wifi1 {
-	base-addr = <0x50200000>;
-	m3-dump-addr = <0x52500000>;
-	etr-addr = <0x52600000>;
-	caldb-addr = <0x52700000>;
-	hremote-size = <0x2300000>;
-	tgt-mem-mode = <0x0>;
-	board_id = <0xa4>;
-	caldb-size = <0x800000>;
-	status = "ok";
-};
-
-&pcie0 {
-	status = "ok";
-	interrupts = <0 52 0>, <0 416 0>, <0 417 0>,
-                     <0 418 0>, <0 419 0>, <0 420 0>,
-                     <0 421 0>, <0 422 0>, <0 423 0>,
-                     <0 424 0>, <0 425 0>, <0 426 0>,
-                     <0 427 0>, <0 428 0>, <0 429 0>,
-                     <0 430 0>, <0 431 0>;
-
-        interrupt-names = "msi", "msi_0", "msi_1",
-                          "msi_2", "msi_3", "msi_4",
-                          "msi_5", "msi_6", "msi_7",
-                          "msi_8", "msi_9", "msi_10",
-                          "msi_11", "msi_12", "msi_13",
-                          "msi_14", "msi_15";
-
-        qcom,msi-gicm-addr = <0x0B00A040>;
-        qcom,msi-gicm-base = <0x1c0>;
-};
-
-&pcie0_rp {
-        status = "ok";
-
-        mhi_0: qcom,mhi@0 {
-                reg = <0 0 0 0 0 >;
-                qrtr_instance_id = <0x20>;
-                memory-region = <&mhi_region0>;
-        };
-};
-
-&pcie_phy {
-        status = "ok";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-yuncore-ax840.dts

@@ -35,15 +35,12 @@
 		bootargs-append = " swiotlb=1 coherent_pool=2M";
 	};
 
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
 	reserved-memory {
 		tzapp:tzapp@49B00000 {	/* TZAPPS */
 			no-map;
 			reg = <0x0 0x49B00000 0x0 0x00600000>;
 		};
 	};
-#endif
 };
 
 &tlmm {
@@ -162,16 +159,6 @@
 		};
 	};
 
-	modem_power_pins {
-		mux {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-
 	leds_pins: leds_pins {
 		led_blue {
 			pins = "gpio35";
@@ -236,18 +223,6 @@
 	};
 
 	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <0x04>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0x00>;
-		local-mac-address = [00 00 00 00 00 00];
-		qcom,link-poll = <0x01>;
-		qcom,phy-mdio-addr = <0x03>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
 		device_type = "network";
 		compatible = "qcom,nss-dp";
 		qcom,id = <0x05>;
@@ -259,6 +234,18 @@
 		phy-mode = "sgmii";
 	};
 
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x04>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x03>;
+		phy-mode = "sgmii";
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -281,17 +268,17 @@
 		pinctrl-names = "default";
 
 		led_system: system {
-			label = "green:system";
+			label = "ax860:green:system";
 			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan2g {
-			label = "blue:wlan2g";
+			label = "ax860:blue:wlan2g";
 			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan5g {
-			label = "red:wlan5g";
+			label = "ax860:red:wlan5g";
 			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
 		};
 	};
@@ -349,31 +336,8 @@
 	/delete-node/ opp06;
 };
 
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
 &qseecom {
 	mem-start = <0x49B00000>;
 	mem-size = <0x600000>;
 	status = "ok";
 };
-#endif
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&qusb_phy_0 {
-	status = "ok";
-};
-
-&qusb_phy_1 {
-	status = "ok";
-};
-
-&usb2 {
-	status = "ok";
-};
-
-&usb3 {
-	status = "ok";
-};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-yuncore-fap650.dts

@@ -1,423 +0,0 @@
-/dts-v1/;
-/*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "qcom-ipq6018.dtsi"
-#include "qcom-ipq6018-rpm-regulator.dtsi"
-#include "qcom-ipq6018-cpr-regulator.dtsi"
-#include "qcom-ipq6018-cp-cpu.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Yuncore FAP650";
-	compatible = "yuncore,fap650", "qcom,ipq6018-cp03", "qcom,ipq6018";
-	interrupt-parent = <&intc>;
-	qcom,msm-id = <0x1A5 0x0>;
-
-	aliases {
-		/*
-		 * Aliases as required by u-boot
-		 * to patch MAC addresses
-		 */
-		ethernet0 = "/soc/dp5";
-		ethernet1 = "/soc/dp4";
-		ethernet2 = "/soc/dp3";
-		ethernet3 = "/soc/dp2";
-		ethernet4 = "/soc/dp1";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-		bootargs-append = " swiotlb=1";
-#else
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-#endif
-	};
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	qpic_pins: qpic_pins {
-		data_0 {
-			pins = "gpio15";
-			function = "qpic_pad0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_1 {
-			pins = "gpio12";
-			function = "qpic_pad1";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_2 {
-			pins = "gpio13";
-			function = "qpic_pad2";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_3 {
-			pins = "gpio14";
-			function = "qpic_pad3";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_4 {
-			pins = "gpio5";
-			function = "qpic_pad4";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_5 {
-			pins = "gpio6";
-			function = "qpic_pad5";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_6 {
-			pins = "gpio7";
-			function = "qpic_pad6";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		data_7 {
-			pins = "gpio8";
-			function = "qpic_pad7";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		qpic_pad {
-			pins = "gpio1", "gpio3", "gpio4",
-			       "gpio10", "gpio11", "gpio17";
-			function = "qpic_pad";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		wps_button {
-			pins = "gpio19";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_sys {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_5g {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_2g {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-	mdio@90000 {
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0>;
-		status = "ok";
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-		phy2: ethernet-phy@2 {
-			reg = <2>;
-		};
-		phy3: ethernet-phy@3 {
-			reg = <3>;
-		};
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-		};
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-		switch_lan_bmp = <0x1e>; /* lan port bitmap */
-		switch_wan_bmp = <0x20>; /* wan port bitmap */
-		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
-		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-		qcom,port_phyinfo {
-			port@3 {
-				port_id = <3>;
-				phy_address = <4>;
-			};
-			port@4 {
-				port_id = <4>;
-				phy_address = <3>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <1>;
-		reg = <0x3a001000 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <0>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <2>;
-		reg = <0x3a001200 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <1>;
-		phy-mode = "sgmii";
-	};
-
-	dp3 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <3>;
-		reg = <0x3a001400 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <2>;
-		phy-mode = "sgmii";
-	};
-
-	dp4 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <4>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <3>;
-		phy-mode = "sgmii";
-	};
-
-	dp5 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <5>;
-		reg = <0x3a001800 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <4>;
-		phy-mode = "sgmii";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_power: led@32 {
-			label = "green:power";
-			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led@35 {
-			label = "green:wifi5";
-			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@37 {
-			label = "green:wifi2";
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&nand {
-	pinctrl-0 = <&qpic_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&qusb_phy_0 {
-	status = "ok";
-};
-
-&usb3 {
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-/* TZAPP is enabled in default memory profile only */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-&qseecom {
-	mem-start = <0x49B00000>;
-	mem-size = <0x600000>;
-	status = "ok";
-};
-#endif

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-eap102.dts

@@ -50,78 +50,25 @@
 			bootargs-append = " swiotlb=1 coherent_pool=2M";
 		#endif
 	};
-
-	gpio-export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		mcu-enable {
-			gpio-export,name = "mcu-enable";
-			gpio-export,output = <0>;
-			gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb-hub-enable {
-			gpio-export,name = "usb-hub-enable";
-			gpio-export,output = <1>;
-			gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb-rear-power {
-			gpio-export,name = "usb-rear-power";
-			gpio-export,output = <1>;
-			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb-side-power {
-			gpio-export,name = "usb-side-power";
-			gpio-export,output = <1>;
-			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &tlmm {
-	pinctrl-0 = <&mcu_rst &mcu_rsv &usb_rear_pwr &usb_side_pwr &usb_hub_rst>;
+	pinctrl-0 = <&btcoex_pins>;
 	pinctrl-names = "default";
 
-	mcu_rst: mcu_rst_pins {
+	btcoex_pins: btcoex_pins {
-		pins = "gpio54";
+		mux_0 {
-		function = "gpio";
+			pins = "gpio64";
-		drive-strength = <8>;
+			function = "pta1_1";
-		bias-disable;
+			drive-strength = <6>;
-		output-low;
+			bias-pull-down;
-	};
+		};
-
+		mux_1 {
-	mcu_rsv: mcu_rsv_pins {
+			pins = "gpio65";
-		pins = "gpio56";
+			function = "pta1_2";
-		function = "gpio";
+			drive-strength = <6>;
-		drive-strength = <8>;
+			bias-pull-down;
-		bias-disable;
+		};
-	};
-
-	usb_rear_pwr: usb_rear_pwr_pins {
-		pins = "gpio29";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-disable;
-		output-high;
-	};
-
-	usb_side_pwr: usb_side_pwr_pins {
-		pins = "gpio30";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-disable;
-		output-high;
-	};
-
-	usb_hub_rst: usb_hub_rst_pins {
-		pins = "gpio55";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-disable;
-		output-high;
 	};
 
 	mdio_pins: mdio_pinmux {
@@ -225,7 +172,17 @@
 		};
 	};
 
+	hsuart_pins: hsuart_pins {
+		mux {
+			pins = "gpio49";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
 	button_pins: button_pins {
+
 		reset_button {
 			pins = "gpio66";
 			function = "gpio";
@@ -263,6 +220,31 @@
 			bias-pull-down;
 		};
 	};
+
+	usb_mux_sel_pins: usb_mux_pins {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	pcie0_pins: pcie_pins {
+		pcie0_rst {
+			pins = "gpio58";
+			function = "pcie0_rst";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		pcie0_wake {
+			pins = "gpio59";
+			function = "pcie0_wake";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
 };
 
 &soc {
@@ -751,6 +733,12 @@
 	};
 };
 
+&serial_blsp2 {
+	pinctrl-0 = <&hsuart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
 &nss0 {
 	qcom,low-frequency = <187200000>;
 	qcom,mid-frequency = <748800000>;
@@ -824,7 +812,7 @@
 };
 
 &pcie0 {
-	status = "disabled";
+	status = "ok";
 };
 
 &pcie1 {

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wf196.dts

@@ -55,17 +55,6 @@
 		#endif
 	};
 
-	gpio-export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		mcu-enable {
-			gpio-export,name = "mcu-enable";
-			gpio-export,output = <0>;
-			gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
 	reserved-memory {
 /* No Pine attach in 256M profile */
 #if !defined(__IPQ_MEM_PROFILE_256_MB__)
@@ -166,15 +155,28 @@
 };
 
 &tlmm {
-	pinctrl-0 = <&mcu_rst>;
+	pinctrl-0 = <&btcoex_pins>;
 	pinctrl-names = "default";
 
-	mcu_rst: mcu_rst_pins {
+	btcoex_pins: btcoex_pins {
-		pins = "gpio34";
+		mux_0 {
-		function = "gpio";
+			pins = "gpio64";
-		drive-strength = <8>;
+			function = "pta1_1";
-		bias-disable;
+			drive-strength = <6>;
-		output-low;
+			bias-pull-down;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "pta1_2";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+		mux_2 {
+			pins = "gpio66";
+			function = "pta1_0";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
 	};
 
 	mdio_pins: mdio_pinmux {
@@ -205,15 +207,14 @@
 			bias-disable;
 		};
 	};
-
 	i2c_5_pins: i2c_5_pinmux {
-		mux {
+                mux {
-			pins = "gpio0", "gpio2";
+                        pins = "gpio0", "gpio2";
-			function = "blsp5_i2c";
+                        function = "blsp5_i2c";
-			drive-strength = <8>;
+                        drive-strength = <8>;
-			bias-disable;
+                        bias-disable;
-		};
+                };
-	};
+        };
 
 	spi_0_pins: spi_0_pins {
 		mux {
@@ -224,6 +225,33 @@
 		};
 	};
 
+	spi_3_pins: spi_3_pins {
+		mux {
+			pins = "gpio50", "gpio52", "gpio53";
+			function = "blsp3_spi";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		spi_cs {
+			pins = "gpio22";
+			function = "blsp3_spi2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		quartz_interrupt {
+			pins = "gpio47";
+			function = "gpio";
+			input;
+			bias-disable;
+		};
+		quartz_reset {
+			pins = "gpio21";
+			function = "gpio";
+			output-low;
+			bias-disable;
+		};
+	};
+
 	qpic_pins: qpic_pins {
 		data_0 {
 			pins = "gpio15";
@@ -284,7 +312,7 @@
 
 	hsuart_pins: hsuart_pins {
 		mux {
-			pins = "gpio48", "gpio49";
+			pins = "gpio46", "gpio47", "gpio48", "gpio49";
 			function = "blsp2_uart";
 			drive-strength = <8>;
 			bias-disable;
@@ -292,6 +320,7 @@
 	};
 
 	button_pins: button_pins {
+
 		wps_button {
 			pins = "gpio67";
 			function = "gpio";
@@ -337,24 +366,24 @@
 			bias-pull-down;
 		};
 	};
-
 	pwm_pins: pwm_pinmux {
-		mux_1 {
+                mux_1 {
-			pins = "gpio25";
+                        pins = "gpio25";
-			function = "pwm02";
+                        function = "pwm02";
-			drive-strength = <8>;
+                        drive-strength = <8>;
-		};
+                };
 		mux_2 {
-			pins = "gpio26";
+                        pins = "gpio26";
-			function = "pwm12";
+                        function = "pwm12";
-			drive-strength = <8>;
+                        drive-strength = <8>;
-		};
+                };
 		mux_3 {
-			pins = "gpio27";
+                        pins = "gpio27";
-			function = "pwm22";
+                        function = "pwm22";
-			drive-strength = <8>;
+                        drive-strength = <8>;
-		};
+                };
 	};
+
 };
 
 &soc {

feeds/ipq807x/ipq807x/image/ipq50xx.mk

@@ -18,24 +18,6 @@ define Device/edgecore_eap104
 endef
 TARGET_DEVICES += edgecore_eap104
 
-define Device/liteon_wpx8324
-  DEVICE_TITLE := Liteon WPX8324
-  DEVICE_DTS := qcom-ipq5018-liteon-wpx8324
-  SUPPORTED_DEVICES := liteon,wpx8324
-  DEVICE_PACKAGES := ath11k-wifi-liteon-wpx8324 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-endef
-TARGET_DEVICES += liteon_wpx8324
-
-define Device/muxi_ap3220l
-  DEVICE_TITLE := MUXI AP3220L
-  DEVICE_DTS := qcom-ipq5018-muxi-ap3220l
-  SUPPORTED_DEVICES := muxi,ap3220l
-  DEVICE_PACKAGES := ath11k-wifi-muxi-ap3220l ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-endef
-TARGET_DEVICES += muxi_ap3220l
-
 define Device/motorola_q14
   DEVICE_TITLE := Motorola Q14
   DEVICE_DTS := qcom-ipq5018-q14

feeds/ipq807x/ipq807x/image/ipq60xx.mk

@@ -1,18 +1,5 @@
 KERNEL_LOADADDR := 0x41008000
 
-DEVICE_VARS += CE_TYPE
-
-define Device/cig_wf660a
-  DEVICE_TITLE := Cigtech WF-660a
-  DEVICE_DTS := qcom-ipq6018-cig-wf660a
-  SUPPORTED_DEVICES := cig,wf660a
-  DEVICE_DTS_CONFIG := config@cp01-c1
-  DEVICE_PACKAGES := ath11k-wifi-cig-wf660a uboot-env uboot-envtools
-  IMAGES := sysupgrade.tar mmc-factory.bin
-  IMAGE/mmc-factory.bin := append-ubi | qsdk-ipq-factory-mmc
-endef
-TARGET_DEVICES += cig_wf660a
-
 define Device/cig_wf188n
   DEVICE_TITLE := Cigtech WF-188n
   DEVICE_DTS := qcom-ipq6018-cig-wf188n
@@ -31,30 +18,12 @@ define Device/hfcl_ion4xe
 endef
 TARGET_DEVICES += hfcl_ion4xe
 
-define Device/hfcl_ion4x
-  DEVICE_TITLE := HFCL ION4X
-  DEVICE_DTS := qcom-ipq6018-hfcl-ion4x
-  DEVICE_DTS_CONFIG := config@cp01-c1
-  SUPPORTED_DEVICES := hfcl,ion4x
-  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-envtools
-endef
-TARGET_DEVICES += hfcl_ion4x
-
-define Device/hfcl_ion4x_2
-  DEVICE_TITLE := HFCL ION4X_2
-  DEVICE_DTS := qcom-ipq6018-hfcl-ion4x_2
-  DEVICE_DTS_CONFIG := config@cp01-c1
-  SUPPORTED_DEVICES := hfcl,ion4x_2
-  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-envtools
-endef
-TARGET_DEVICES += hfcl_ion4x_2
-
 define Device/hfcl_ion4xi
   DEVICE_TITLE := HFCL ION4Xi
   DEVICE_DTS := qcom-ipq6018-hfcl-ion4xi
   DEVICE_DTS_CONFIG := config@cp01-c1
   SUPPORTED_DEVICES := hfcl,ion4xi
-  DEVICE_PACKAGES := ath11k-wifi-hfcl-ion4xi uboot-envtools
+  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-envtools
 endef
 TARGET_DEVICES += hfcl_ion4xi
 
@@ -67,33 +36,6 @@ define Device/edgecore_eap101
 endef
 TARGET_DEVICES += edgecore_eap101
 
-define Device/indio_um-310ax-v1
-  DEVICE_TITLE := Indio UM-310AX V1
-  DEVICE_DTS := qcom-ipq6018-indio-um-310ax-v1
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  SUPPORTED_DEVICES := indio,um-310ax-v1
-  DEVICE_PACKAGES := ath11k-wifi-indio-um-310ax-v1 uboot-env
-endef
-TARGET_DEVICES += indio_um-310ax-v1
-
-define Device/indio_um-510axp-v1
-  DEVICE_TITLE := Indio UM-510AXP V1
-  DEVICE_DTS := qcom-ipq6018-indio-um-510axp-v1
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  SUPPORTED_DEVICES := indio,um-510axp-v1
-  DEVICE_PACKAGES := ath11k-wifi-indio-um-510axp-v1 uboot-env
-endef
-TARGET_DEVICES += indio_um-510axp-v1
-
-define Device/indio_um-510axm-v1
-  DEVICE_TITLE := Indio UM-510AXM V1
-  DEVICE_DTS := qcom-ipq6018-indio-um-510axm-v1
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  SUPPORTED_DEVICES := indio,um-510axm-v1
-  DEVICE_PACKAGES := ath11k-wifi-indio-um-510axm-v1 uboot-env
-endef
-TARGET_DEVICES += indio_um-510axm-v1
-
 define Device/wallys_dr6018
   DEVICE_TITLE := Wallys DR6018
   DEVICE_DTS := qcom-ipq6018-wallys-dr6018
@@ -108,7 +50,7 @@ define Device/wallys_dr6018_v4
   DEVICE_DTS := qcom-ipq6018-wallys-dr6018-v4
   DEVICE_DTS_CONFIG := config@cp01-c4
   SUPPORTED_DEVICES := wallys,dr6018-v4
-  DEVICE_PACKAGES := ath11k-wifi-wallys-dr6018-v4 uboot-envtools ath11k-firmware-qcn9000
+  DEVICE_PACKAGES := ath11k-wifi-wallys-dr6018-v4 uboot-envtools
 endef
 TARGET_DEVICES += wallys_dr6018_v4
 
@@ -146,63 +88,3 @@ define Device/yuncore_ax840
   DEVICE_PACKAGES := ath11k-wifi-yuncore-ax840 uboot-env
 endef
 TARGET_DEVICES += yuncore_ax840
-
-define Device/plasmacloud_common_64k
-  DEVICE_PACKAGES := uboot-envtools
-  CE_TYPE :=
-  BLOCKSIZE := 64k
-  IMAGES := sysupgrade.tar factory.bin
-  IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=$$$$(CE_TYPE)
-  IMAGE/sysupgrade.tar := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-  KERNEL += | pad-to $$(BLOCKSIZE)
-endef
-
-define Device/plasmacloud_pax1800-v1
-  $(Device/plasmacloud_common_64k)
-  DEVICE_TITLE := Plasma Cloud PAX1800 v1
-  DEVICE_DTS := qcom-ipq6018-pax1800-v1
-  SUPPORTED_DEVICES := plasmacloud,pax1800-v1
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  CE_TYPE := PAX1800
-  DEVICE_PACKAGES += ath11k-wifi-plasmacloud-pax1800
-endef
-TARGET_DEVICES += plasmacloud_pax1800-v1
-
-define Device/plasmacloud_pax1800-v2
-  $(Device/plasmacloud_common_64k)
-  DEVICE_TITLE := Plasma Cloud PAX1800 v2
-  DEVICE_DTS := qcom-ipq6018-pax1800-v2
-  SUPPORTED_DEVICES := plasmacloud,pax1800-v2
-  DEVICE_DTS_CONFIG := config@plasmacloud.pax1800v2
-  CE_TYPE := PAX1800v2
-  DEVICE_PACKAGES += ath11k-wifi-plasmacloud-pax1800
-endef
-TARGET_DEVICES += plasmacloud_pax1800-v2
-
-define Device/meshpp_s618_cp03
-  DEVICE_TITLE := S618 cp03
-  DEVICE_DTS := qcom-ipq6018-meshpp-s618-cp03
-  SUPPORTED_DEVICES := meshpp,s618-cp03
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  DEVICE_PACKAGES := ath11k-wifi-meshpp-s618 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
-endef
-TARGET_DEVICES += meshpp_s618_cp03
-
-define Device/meshpp_s618_cp01
-  DEVICE_TITLE := S618 cp01
-  DEVICE_DTS := qcom-ipq6018-meshpp-s618-cp01
-  SUPPORTED_DEVICES := meshpp,s618-cp01
-  DEVICE_DTS_CONFIG := config@cp01-c1
-  DEVICE_PACKAGES := ath11k-wifi-meshpp-s618 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
-endef
-TARGET_DEVICES += meshpp_s618_cp01
-
-define Device/yuncore_fap650
-  DEVICE_TITLE := YunCore FAP 650
-  DEVICE_DTS := qcom-ipq6018-yuncore-fap650
-  SUPPORTED_DEVICES := yuncore,fap650
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  DEVICE_PACKAGES := ath11k-wifi-yuncore-fap650
-endef
-TARGET_DEVICES += yuncore_fap650
-

feeds/ipq807x/ipq807x/image/ipq807x.mk

@@ -36,39 +36,24 @@ define Device/cig_wf194c4
 endef
 TARGET_DEVICES += cig_wf194c4
 
-define Device/cig_wf196_us
+define Device/cig_wf196
-  DEVICE_TITLE := CIG WF196 (US)
+  DEVICE_TITLE := CIG WF196
   DEVICE_DTS := qcom-ipq807x-wf196
   DEVICE_DTS_CONFIG=config@hk14
   SUPPORTED_DEVICES := cig,wf196
   BLOCKSIZE := 256k
   PAGESIZE := 4096
-  DEVICE_PACKAGES := ath11k-wifi-cig-wf196-us aq-fw-download uboot-envtools kmod-usb3 kmod-usb2 \
+  DEVICE_PACKAGES := ath11k-wifi-cig-wf196 aq-fw-download uboot-envtools kmod-usb3 kmod-usb2 \
-	ath11k-firmware-qcn9000 ath11k-wifi-cig-wf196_6g-us \
+  	ath11k-firmware-qcn9000 ath11k-wifi-cig-wf196_6g
-	zephyr-v3.3.x-hci_uart-cig_wf196_nrf52833
 endef
-TARGET_DEVICES += cig_wf196_us
+TARGET_DEVICES += cig_wf196
-
-define Device/cig_wf196_ca
-  DEVICE_TITLE := CIG WF196 (CA)
-  DEVICE_DTS := qcom-ipq807x-wf196
-  DEVICE_DTS_CONFIG=config@hk14
-  SUPPORTED_DEVICES := cig,wf196
-  BLOCKSIZE := 256k
-  PAGESIZE := 4096
-  DEVICE_PACKAGES := ath11k-wifi-cig-wf196-ca aq-fw-download uboot-envtools kmod-usb3 kmod-usb2 \
-	ath11k-firmware-qcn9000 ath11k-wifi-cig-wf196_6g-ca \
-	zephyr-v3.3.x-hci_uart-cig_wf196_nrf52833
-endef
-TARGET_DEVICES += cig_wf196_ca
 
 define Device/edgecore_eap102
   DEVICE_TITLE := Edgecore EAP102
   DEVICE_DTS := qcom-ipq807x-eap102
   DEVICE_DTS_CONFIG=config@ac02
   SUPPORTED_DEVICES := edgecore,eap102
-  DEVICE_PACKAGES := ath11k-wifi-edgecore-eap102 kmod-usb2 kmod-usb3 uboot-envtools \
+  DEVICE_PACKAGES := ath11k-wifi-edgecore-eap102 kmod-usb2 kmod-usb3 uboot-envtools
-	zephyr-v3.3.x-hci_usb-edgecore_eap102_nrf52840
 endef
 TARGET_DEVICES += edgecore_eap102
 

feeds/ipq807x/ipq807x/patches/200-bpf_backport.patch

@@ -32856,7 +32856,7 @@
 +
 +	new_range = dst_reg->off;
 +	if (range_right_open)
-+		new_range++;
++		new_range--;
 +
 +	/* Examples for register markings:
 +	 *

feeds/ipq807x/ipq807x/patches/224-clear-skbuffs-cb-for-incoming-packets.patch

@@ -1,30 +0,0 @@
-From a0d398a7373b395a2cbdc865815560671d1e8a08 Mon Sep 17 00:00:00 2001
-From: Venkat Chimata <venkata@shasta.cloud>
-Date: Fri, 12 Aug 2022 15:42:40 +0530
-Subject: [PATCH] sk_buff's cb should be cleared in the entry point for both
- incoming and outgoing packets at each layer. At bridge, it is already handled
- in the outgoing path, but not in the incoming path. We have seen cases where
- proxyarp_replied was 1 on sk_buffs coming from the WLAN driver and they were
- getting dropped in forwarding path.
-
-Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
----
- net/bridge/br_input.c | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
-index e6b745b7..09cd5b72 100644
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -282,6 +282,8 @@ rx_handler_result_t br_handle_frame(struct sk_buff **pskb)
- 	if (!skb)
- 		return RX_HANDLER_CONSUMED;
- 
-+	memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
-+
- 	p = br_port_get_rcu(skb->dev);
- 
- 	if (unlikely(is_link_local_ether_addr(dest))) {
--- 
-2.34.1
-

feeds/ipq807x/ipq807x/patches/225-net-sched-introduce-Match-all-classifier.patch

@@ -1,315 +0,0 @@
-From: Jiri Pirko <jiri@mellanox.com>
-Date: Thu, 21 Jul 2016 12:03:11 +0200
-Subject: [PATCH] net/sched: introduce Match-all classifier
-
-The matchall classifier matches every packet and allows the user to apply
-actions on it. This filter is very useful in usecases where every packet
-should be matched, for example, packet mirroring (SPAN) can be setup very
-easily using that filter.
-
-Signed-off-by: Jiri Pirko <jiri@mellanox.com>
-Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- create mode 100644 net/sched/cls_matchall.c
-
---- a/include/uapi/linux/pkt_cls.h
-+++ b/include/uapi/linux/pkt_cls.h
-@@ -427,6 +427,17 @@ enum {
- 
- #define TCA_FLOWER_MAX (__TCA_FLOWER_MAX - 1)
- 
-+/* Match-all classifier */
-+
-+enum {
-+	TCA_MATCHALL_UNSPEC,
-+	TCA_MATCHALL_CLASSID,
-+	TCA_MATCHALL_ACT,
-+	__TCA_MATCHALL_MAX,
-+};
-+
-+#define TCA_MATCHALL_MAX (__TCA_MATCHALL_MAX - 1)
-+
- /* Extended Matches */
- 
- struct tcf_ematch_tree_hdr {
---- /dev/null
-+++ b/net/sched/cls_matchall.c
-@@ -0,0 +1,248 @@
-+/*
-+ * net/sched/cls_matchll.c		Match-all classifier
-+ *
-+ * Copyright (c) 2016 Jiri Pirko <jiri@mellanox.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+
-+#include <net/sch_generic.h>
-+#include <net/pkt_cls.h>
-+
-+struct cls_mall_filter {
-+	struct tcf_exts exts;
-+	struct tcf_result res;
-+	u32 handle;
-+	struct rcu_head	rcu;
-+};
-+
-+struct cls_mall_head {
-+	struct cls_mall_filter *filter;
-+	struct rcu_head	rcu;
-+};
-+
-+static int mall_classify(struct sk_buff *skb, const struct tcf_proto *tp,
-+			 struct tcf_result *res)
-+{
-+	struct cls_mall_head *head = rcu_dereference_bh(tp->root);
-+	struct cls_mall_filter *f = head->filter;
-+
-+	return tcf_exts_exec(skb, &f->exts, res);
-+}
-+
-+static int mall_init(struct tcf_proto *tp)
-+{
-+	struct cls_mall_head *head;
-+
-+	head = kzalloc(sizeof(*head), GFP_KERNEL);
-+	if (!head)
-+		return -ENOBUFS;
-+
-+	rcu_assign_pointer(tp->root, head);
-+
-+	return 0;
-+}
-+
-+static void mall_destroy_filter(struct rcu_head *head)
-+{
-+	struct cls_mall_filter *f = container_of(head, struct cls_mall_filter, rcu);
-+
-+	tcf_exts_destroy(&f->exts);
-+	kfree(f);
-+}
-+
-+static bool mall_destroy(struct tcf_proto *tp, bool force)
-+{
-+	struct cls_mall_head *head = rtnl_dereference(tp->root);
-+
-+	if (!force && head->filter)
-+		return false;
-+
-+	if (head->filter)
-+		call_rcu(&head->filter->rcu, mall_destroy_filter);
-+	RCU_INIT_POINTER(tp->root, NULL);
-+	kfree_rcu(head, rcu);
-+	return true;
-+}
-+
-+static unsigned long mall_get(struct tcf_proto *tp, u32 handle)
-+{
-+	struct cls_mall_head *head = rtnl_dereference(tp->root);
-+	struct cls_mall_filter *f = head->filter;
-+
-+	if (f && f->handle == handle)
-+		return (unsigned long) f;
-+	return 0;
-+}
-+
-+static const struct nla_policy mall_policy[TCA_MATCHALL_MAX + 1] = {
-+	[TCA_MATCHALL_UNSPEC]		= { .type = NLA_UNSPEC },
-+	[TCA_MATCHALL_CLASSID]		= { .type = NLA_U32 },
-+};
-+
-+static int mall_set_parms(struct net *net, struct tcf_proto *tp,
-+			  struct cls_mall_filter *f,
-+			  unsigned long base, struct nlattr **tb,
-+			  struct nlattr *est, bool ovr)
-+{
-+	struct tcf_exts e;
-+	int err;
-+
-+	tcf_exts_init(&e, TCA_MATCHALL_ACT, 0);
-+	err = tcf_exts_validate(net, tp, tb, est, &e, ovr);
-+	if (err < 0)
-+		return err;
-+
-+	if (tb[TCA_MATCHALL_CLASSID]) {
-+		f->res.classid = nla_get_u32(tb[TCA_MATCHALL_CLASSID]);
-+		tcf_bind_filter(tp, &f->res, base);
-+	}
-+
-+	tcf_exts_change(tp, &f->exts, &e);
-+
-+	return 0;
-+}
-+
-+static int mall_change(struct net *net, struct sk_buff *in_skb,
-+		       struct tcf_proto *tp, unsigned long base,
-+		       u32 handle, struct nlattr **tca,
-+		       unsigned long *arg, bool ovr)
-+{
-+	struct cls_mall_head *head = rtnl_dereference(tp->root);
-+	struct cls_mall_filter *fold = (struct cls_mall_filter *) *arg;
-+	struct cls_mall_filter *f;
-+	struct nlattr *tb[TCA_MATCHALL_MAX + 1];
-+	int err;
-+
-+	if (!tca[TCA_OPTIONS])
-+		return -EINVAL;
-+
-+	if (head->filter)
-+		return -EBUSY;
-+
-+	if (fold)
-+		return -EINVAL;
-+
-+	err = nla_parse_nested(tb, TCA_MATCHALL_MAX,
-+			       tca[TCA_OPTIONS], mall_policy);
-+	if (err < 0)
-+		return err;
-+
-+	f = kzalloc(sizeof(*f), GFP_KERNEL);
-+	if (!f)
-+		return -ENOBUFS;
-+
-+	tcf_exts_init(&f->exts, TCA_MATCHALL_ACT, 0);
-+
-+	if (!handle)
-+		handle = 1;
-+	f->handle = handle;
-+
-+	err = mall_set_parms(net, tp, f, base, tb, tca[TCA_RATE], ovr);
-+	if (err)
-+		goto errout;
-+
-+	*arg = (unsigned long) f;
-+	rcu_assign_pointer(head->filter, f);
-+
-+	return 0;
-+
-+errout:
-+	kfree(f);
-+	return err;
-+}
-+
-+static int mall_delete(struct tcf_proto *tp, unsigned long arg)
-+{
-+	struct cls_mall_head *head = rtnl_dereference(tp->root);
-+	struct cls_mall_filter *f = (struct cls_mall_filter *) arg;
-+
-+	RCU_INIT_POINTER(head->filter, NULL);
-+	tcf_unbind_filter(tp, &f->res);
-+	call_rcu(&f->rcu, mall_destroy_filter);
-+	return 0;
-+}
-+
-+static void mall_walk(struct tcf_proto *tp, struct tcf_walker *arg)
-+{
-+	struct cls_mall_head *head = rtnl_dereference(tp->root);
-+	struct cls_mall_filter *f = head->filter;
-+
-+	if (arg->count < arg->skip)
-+		goto skip;
-+	if (arg->fn(tp, (unsigned long) f, arg) < 0)
-+		arg->stop = 1;
-+skip:
-+	arg->count++;
-+}
-+
-+static int mall_dump(struct net *net, struct tcf_proto *tp, unsigned long fh,
-+		     struct sk_buff *skb, struct tcmsg *t)
-+{
-+	struct cls_mall_filter *f = (struct cls_mall_filter *) fh;
-+	struct nlattr *nest;
-+
-+	if (!f)
-+		return skb->len;
-+
-+	t->tcm_handle = f->handle;
-+
-+	nest = nla_nest_start(skb, TCA_OPTIONS);
-+	if (!nest)
-+		goto nla_put_failure;
-+
-+	if (f->res.classid &&
-+	    nla_put_u32(skb, TCA_MATCHALL_CLASSID, f->res.classid))
-+		goto nla_put_failure;
-+
-+	if (tcf_exts_dump(skb, &f->exts))
-+		goto nla_put_failure;
-+
-+	nla_nest_end(skb, nest);
-+
-+	if (tcf_exts_dump_stats(skb, &f->exts) < 0)
-+		goto nla_put_failure;
-+
-+	return skb->len;
-+
-+nla_put_failure:
-+	nla_nest_cancel(skb, nest);
-+	return -1;
-+}
-+
-+static struct tcf_proto_ops cls_mall_ops __read_mostly = {
-+	.kind		= "matchall",
-+	.classify	= mall_classify,
-+	.init		= mall_init,
-+	.destroy	= mall_destroy,
-+	.get		= mall_get,
-+	.change		= mall_change,
-+	.delete		= mall_delete,
-+	.walk		= mall_walk,
-+	.dump		= mall_dump,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int __init cls_mall_init(void)
-+{
-+	return register_tcf_proto_ops(&cls_mall_ops);
-+}
-+
-+static void __exit cls_mall_exit(void)
-+{
-+	unregister_tcf_proto_ops(&cls_mall_ops);
-+}
-+
-+module_init(cls_mall_init);
-+module_exit(cls_mall_exit);
-+
-+MODULE_AUTHOR("Jiri Pirko <jiri@mellanox.com>");
-+MODULE_DESCRIPTION("Match-all classifier");
-+MODULE_LICENSE("GPL v2");
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -526,6 +526,16 @@ config NET_CLS_FLOWER
- 	  To compile this code as a module, choose M here: the module will
- 	  be called cls_flower.
- 
-+config NET_CLS_MATCHALL
-+	tristate "Match-all classifier"
-+	select NET_CLS
-+	---help---
-+	  If you say Y here, you will be able to classify packets based on
-+	  nothing. Every packet will match.
-+
-+	  To compile this code as a module, choose M here: the module will
-+	  be called cls_matchall.
-+
- config NET_EMATCH
- 	bool "Extended Matches"
- 	select NET_CLS
---- a/net/sched/Makefile
-+++ b/net/sched/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_NET_CLS_FLOW)	+= cls_flow.o
- obj-$(CONFIG_NET_CLS_CGROUP)	+= cls_cgroup.o
- obj-$(CONFIG_NET_CLS_BPF)	+= cls_bpf.o
- obj-$(CONFIG_NET_CLS_FLOWER)	+= cls_flower.o
-+obj-$(CONFIG_NET_CLS_MATCHALL)	+= cls_matchall.o
- obj-$(CONFIG_NET_EMATCH)	+= ematch.o
- obj-$(CONFIG_NET_EMATCH_CMP)	+= em_cmp.o
- obj-$(CONFIG_NET_EMATCH_NBYTE)	+= em_nbyte.o

feeds/ipq807x/ipq807x/patches/230-ipv4-route-Ignore-output-interface-in-FIB-lookup-for.patch

@@ -1,72 +0,0 @@
-From: Stefano Brivio <sbrivio@redhat.com>
-Date: Tue, 4 Aug 2020 07:53:42 +0200
-Subject: [PATCH] ipv4: route: Ignore output interface in FIB lookup for PMTU
- route
-
-Currently, processes sending traffic to a local bridge with an
-encapsulation device as a port don't get ICMP errors if they exceed
-the PMTU of the encapsulated link.
-
-David Ahern suggested this as a hack, but it actually looks like
-the correct solution: when we update the PMTU for a given destination
-by means of updating or creating a route exception, the encapsulation
-might trigger this because of PMTU discovery happening either on the
-encapsulation device itself, or its lower layer. This happens on
-bridged encapsulations only.
-
-The output interface shouldn't matter, because we already have a
-valid destination. Drop the output interface restriction from the
-associated route lookup.
-
-For UDP tunnels, we will now have a route exception created for the
-encapsulation itself, with a MTU value reflecting its headroom, which
-allows a bridge forwarding IP packets originated locally to deliver
-errors back to the sending socket.
-
-The behaviour is now consistent with IPv6 and verified with selftests
-pmtu_ipv{4,6}_br_{geneve,vxlan}{4,6}_exception introduced later in
-this series.
-
-v2:
-- reset output interface only for bridge ports (David Ahern)
-- add and use netif_is_any_bridge_port() helper (David Ahern)
-
-Suggested-by: David Ahern <dsahern@gmail.com>
-Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
-Reviewed-by: David Ahern <dsahern@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -4015,6 +4015,16 @@ static inline bool netif_is_ovs_master(c
- 	return dev->priv_flags & IFF_OPENVSWITCH;
- }
- 
-+static inline bool netif_is_ovs_port(const struct net_device *dev)
-+{
-+	return dev->priv_flags & IFF_OVS_DATAPATH;
-+}
-+
-+static inline bool netif_is_any_bridge_port(const struct net_device *dev)
-+{
-+	return netif_is_bridge_port(dev) || netif_is_ovs_port(dev);
-+}
-+
- static inline bool netif_is_ifb_dev(const struct net_device *dev)
- {
- 	return dev->priv_flags_ext & IFF_EXT_IFB;
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -1004,6 +1004,11 @@ static void ip_rt_update_pmtu(struct dst
- 	struct flowi4 fl4;
- 
- 	ip_rt_build_flow_key(&fl4, sk, skb);
-+
-+	/* Don't make lookup fail for bridged encapsulations */
-+	if (skb && netif_is_any_bridge_port(skb->dev))
-+		fl4.flowi4_oif = 0;
-+
- 	__ip_rt_update_pmtu(rt, &fl4, mtu);
- }
- 

feeds/ipq807x/ipq807x/patches/231-icmp-add-helpers-to-recognize-ICMP-error-packets.patch

@@ -1,57 +0,0 @@
-From: Matteo Croce <mcroce@redhat.com>
-Date: Sat, 2 Nov 2019 01:12:03 +0100
-Subject: [PATCH] icmp: add helpers to recognize ICMP error packets
-
-Add two helper functions, one for IPv4 and one for IPv6, to recognize
-the ICMP packets which are error responses.
-This packets are special because they have as payload the original
-header of the packet which generated it (RFC 792 says at least 8 bytes,
-but Linux actually includes much more than that).
-
-Signed-off-by: Matteo Croce <mcroce@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/linux/icmp.h
-+++ b/include/linux/icmp.h
-@@ -24,4 +24,19 @@ static inline struct icmphdr *icmp_hdr(c
- {
- 	return (struct icmphdr *)skb_transport_header(skb);
- }
-+
-+static inline bool icmp_is_err(int type)
-+{
-+	switch (type) {
-+	case ICMP_DEST_UNREACH:
-+	case ICMP_SOURCE_QUENCH:
-+	case ICMP_REDIRECT:
-+	case ICMP_TIME_EXCEEDED:
-+	case ICMP_PARAMETERPROB:
-+		return true;
-+	}
-+
-+	return false;
-+}
-+
- #endif	/* _LINUX_ICMP_H */
---- a/include/linux/icmpv6.h
-+++ b/include/linux/icmpv6.h
-@@ -42,4 +42,18 @@ extern void				icmpv6_flow_init(struct s
- 							 const struct in6_addr *saddr,
- 							 const struct in6_addr *daddr,
- 							 int oif);
-+
-+static inline bool icmpv6_is_err(int type)
-+{
-+	switch (type) {
-+	case ICMPV6_DEST_UNREACH:
-+	case ICMPV6_PKT_TOOBIG:
-+	case ICMPV6_TIME_EXCEED:
-+	case ICMPV6_PARAMPROB:
-+		return true;
-+	}
-+
-+	return false;
-+}
-+
- #endif

feeds/ipq807x/ipq807x/patches/232-tunnels-PMTU-discovery-support-for-directly-bridged-.patch

@@ -1,360 +0,0 @@
-From: Stefano Brivio <sbrivio@redhat.com>
-Date: Tue, 4 Aug 2020 07:53:43 +0200
-Subject: [PATCH] tunnels: PMTU discovery support for directly bridged IP
- packets
-
-It's currently possible to bridge Ethernet tunnels carrying IP
-packets directly to external interfaces without assigning them
-addresses and routes on the bridged network itself: this is the case
-for UDP tunnels bridged with a standard bridge or by Open vSwitch.
-
-PMTU discovery is currently broken with those configurations, because
-the encapsulation effectively decreases the MTU of the link, and
-while we are able to account for this using PMTU discovery on the
-lower layer, we don't have a way to relay ICMP or ICMPv6 messages
-needed by the sender, because we don't have valid routes to it.
-
-On the other hand, as a tunnel endpoint, we can't fragment packets
-as a general approach: this is for instance clearly forbidden for
-VXLAN by RFC 7348, section 4.3:
-
-   VTEPs MUST NOT fragment VXLAN packets.  Intermediate routers may
-   fragment encapsulated VXLAN packets due to the larger frame size.
-   The destination VTEP MAY silently discard such VXLAN fragments.
-
-The same paragraph recommends that the MTU over the physical network
-accomodates for encapsulations, but this isn't a practical option for
-complex topologies, especially for typical Open vSwitch use cases.
-
-Further, it states that:
-
-   Other techniques like Path MTU discovery (see [RFC1191] and
-   [RFC1981]) MAY be used to address this requirement as well.
-
-Now, PMTU discovery already works for routed interfaces, we get
-route exceptions created by the encapsulation device as they receive
-ICMP Fragmentation Needed and ICMPv6 Packet Too Big messages, and
-we already rebuild those messages with the appropriate MTU and route
-them back to the sender.
-
-Add the missing bits for bridged cases:
-
-- checks in skb_tunnel_check_pmtu() to understand if it's appropriate
-  to trigger a reply according to RFC 1122 section 3.2.2 for ICMP and
-  RFC 4443 section 2.4 for ICMPv6. This function is already called by
-  UDP tunnels
-
-- a new function generating those ICMP or ICMPv6 replies. We can't
-  reuse icmp_send() and icmp6_send() as we don't see the sender as a
-  valid destination. This doesn't need to be generic, as we don't
-  cover any other type of ICMP errors given that we only provide an
-  encapsulation function to the sender
-
-While at it, make the MTU check in skb_tunnel_check_pmtu() accurate:
-we might receive GSO buffers here, and the passed headroom already
-includes the inner MAC length, so we don't have to account for it
-a second time (that would imply three MAC headers on the wire, but
-there are just two).
-
-This issue became visible while bridging IPv6 packets with 4500 bytes
-of payload over GENEVE using IPv4 with a PMTU of 4000. Given the 50
-bytes of encapsulation headroom, we would advertise MTU as 3950, and
-we would reject fragmented IPv6 datagrams of 3958 bytes size on the
-wire. We're exclusively dealing with network MTU here, though, so we
-could get Ethernet frames up to 3964 octets in that case.
-
-v2:
-- moved skb_tunnel_check_pmtu() to ip_tunnel_core.c (David Ahern)
-- split IPv4/IPv6 functions (David Ahern)
-
-Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
-Reviewed-by: David Ahern <dsahern@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/net/ip_tunnels.h
-+++ b/include/net/ip_tunnels.h
-@@ -279,6 +279,8 @@ int iptunnel_xmit(struct sock *sk, struc
- 		  u8 tos, u8 ttl, __be16 df, bool xnet);
- struct metadata_dst *iptunnel_metadata_reply(struct metadata_dst *md,
- 					     gfp_t flags);
-+int skb_tunnel_check_pmtu(struct sk_buff *skb, struct dst_entry *encap_dst,
-+			  int headroom, bool reply);
- 
- struct sk_buff *iptunnel_handle_offloads(struct sk_buff *skb, bool gre_csum,
- 					 int gso_type_mask);
---- a/net/ipv4/ip_tunnel_core.c
-+++ b/net/ipv4/ip_tunnel_core.c
-@@ -204,6 +204,252 @@ error:
- }
- EXPORT_SYMBOL_GPL(iptunnel_handle_offloads);
- 
-+/**
-+ * iptunnel_pmtud_build_icmp() - Build ICMP error message for PMTUD
-+ * @skb:	Original packet with L2 header
-+ * @mtu:	MTU value for ICMP error
-+ *
-+ * Return: length on success, negative error code if message couldn't be built.
-+ */
-+static int iptunnel_pmtud_build_icmp(struct sk_buff *skb, int mtu)
-+{
-+	const struct iphdr *iph = ip_hdr(skb);
-+	struct icmphdr *icmph;
-+	struct iphdr *niph;
-+	struct ethhdr eh;
-+	int len, err;
-+
-+	if (!pskb_may_pull(skb, ETH_HLEN + sizeof(struct iphdr)))
-+		return -EINVAL;
-+
-+	skb_copy_bits(skb, skb_mac_header(skb) - skb->data, &eh, ETH_HLEN);
-+	pskb_pull(skb, ETH_HLEN);
-+	skb_reset_network_header(skb);
-+
-+	err = pskb_trim(skb, 576 - sizeof(*niph) - sizeof(*icmph));
-+	if (err)
-+		return err;
-+
-+	len = skb->len + sizeof(*icmph);
-+	err = skb_cow(skb, sizeof(*niph) + sizeof(*icmph) + ETH_HLEN);
-+	if (err)
-+		return err;
-+
-+	icmph = (struct icmphdr *)skb_push(skb, sizeof(*icmph));
-+	*icmph = (struct icmphdr) {
-+		.type			= ICMP_DEST_UNREACH,
-+		.code			= ICMP_FRAG_NEEDED,
-+		.checksum		= 0,
-+		.un.frag.__unused	= 0,
-+		.un.frag.mtu		= ntohs(mtu),
-+	};
-+	icmph->checksum = ip_compute_csum(icmph, len);
-+	skb_reset_transport_header(skb);
-+
-+	niph = (struct iphdr *)skb_push(skb, sizeof(*niph));
-+	*niph = (struct iphdr) {
-+		.ihl			= sizeof(*niph) / 4u,
-+		.version 		= 4,
-+		.tos 			= 0,
-+		.tot_len		= htons(len + sizeof(*niph)),
-+		.id			= 0,
-+		.frag_off		= htons(IP_DF),
-+		.ttl			= iph->ttl,
-+		.protocol		= IPPROTO_ICMP,
-+		.saddr			= iph->daddr,
-+		.daddr			= iph->saddr,
-+	};
-+	ip_send_check(niph);
-+	skb_reset_network_header(skb);
-+
-+	skb->ip_summed = CHECKSUM_NONE;
-+
-+	eth_header(skb, skb->dev, htons(eh.h_proto), eh.h_source, eh.h_dest, 0);
-+	skb_reset_mac_header(skb);
-+
-+	return skb->len;
-+}
-+
-+/**
-+ * iptunnel_pmtud_check_icmp() - Trigger ICMP reply if needed and allowed
-+ * @skb:	Buffer being sent by encapsulation, L2 headers expected
-+ * @mtu:	Network MTU for path
-+ *
-+ * Return: 0 for no ICMP reply, length if built, negative value on error.
-+ */
-+static int iptunnel_pmtud_check_icmp(struct sk_buff *skb, int mtu)
-+{
-+	const struct icmphdr *icmph = icmp_hdr(skb);
-+	const struct iphdr *iph = ip_hdr(skb);
-+
-+	if (mtu <= 576 || iph->frag_off != htons(IP_DF))
-+		return 0;
-+
-+	if (ipv4_is_lbcast(iph->daddr)  || ipv4_is_multicast(iph->daddr) ||
-+	    ipv4_is_zeronet(iph->saddr) || ipv4_is_loopback(iph->saddr)  ||
-+	    ipv4_is_lbcast(iph->saddr)  || ipv4_is_multicast(iph->saddr))
-+		return 0;
-+
-+	if (iph->protocol == IPPROTO_ICMP && icmp_is_err(icmph->type))
-+		return 0;
-+
-+	return iptunnel_pmtud_build_icmp(skb, mtu);
-+}
-+
-+#if IS_ENABLED(CONFIG_IPV6)
-+/**
-+ * iptunnel_pmtud_build_icmpv6() - Build ICMPv6 error message for PMTUD
-+ * @skb:	Original packet with L2 header
-+ * @mtu:	MTU value for ICMPv6 error
-+ *
-+ * Return: length on success, negative error code if message couldn't be built.
-+ */
-+static int iptunnel_pmtud_build_icmpv6(struct sk_buff *skb, int mtu)
-+{
-+	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
-+	struct icmp6hdr *icmp6h;
-+	struct ipv6hdr *nip6h;
-+	struct ethhdr eh;
-+	int len, err;
-+	__wsum csum;
-+
-+	if (!pskb_may_pull(skb, ETH_HLEN + sizeof(struct ipv6hdr)))
-+		return -EINVAL;
-+
-+	skb_copy_bits(skb, skb_mac_header(skb) - skb->data, &eh, ETH_HLEN);
-+	pskb_pull(skb, ETH_HLEN);
-+	skb_reset_network_header(skb);
-+
-+	err = pskb_trim(skb, IPV6_MIN_MTU - sizeof(*nip6h) - sizeof(*icmp6h));
-+	if (err)
-+		return err;
-+
-+	len = skb->len + sizeof(*icmp6h);
-+	err = skb_cow(skb, sizeof(*nip6h) + sizeof(*icmp6h) + ETH_HLEN);
-+	if (err)
-+		return err;
-+
-+	icmp6h = (struct icmp6hdr *)skb_push(skb, sizeof(*icmp6h));
-+	*icmp6h = (struct icmp6hdr) {
-+		.icmp6_type		= ICMPV6_PKT_TOOBIG,
-+		.icmp6_code		= 0,
-+		.icmp6_cksum		= 0,
-+		.icmp6_mtu		= htonl(mtu),
-+	};
-+	skb_reset_transport_header(skb);
-+
-+	nip6h = (struct ipv6hdr *)skb_push(skb, sizeof(*nip6h));
-+	*nip6h = (struct ipv6hdr) {
-+		.priority		= 0,
-+		.version		= 6,
-+		.flow_lbl		= { 0 },
-+		.payload_len		= htons(len),
-+		.nexthdr		= IPPROTO_ICMPV6,
-+		.hop_limit		= ip6h->hop_limit,
-+		.saddr			= ip6h->daddr,
-+		.daddr			= ip6h->saddr,
-+	};
-+	skb_reset_network_header(skb);
-+
-+	csum = csum_partial(icmp6h, len, 0);
-+	icmp6h->icmp6_cksum = csum_ipv6_magic(&nip6h->saddr, &nip6h->daddr, len,
-+					      IPPROTO_ICMPV6, csum);
-+
-+	skb->ip_summed = CHECKSUM_NONE;
-+
-+	eth_header(skb, skb->dev, htons(eh.h_proto), eh.h_source, eh.h_dest, 0);
-+	skb_reset_mac_header(skb);
-+
-+	return skb->len;
-+}
-+
-+/**
-+ * iptunnel_pmtud_check_icmpv6() - Trigger ICMPv6 reply if needed and allowed
-+ * @skb:	Buffer being sent by encapsulation, L2 headers expected
-+ * @mtu:	Network MTU for path
-+ *
-+ * Return: 0 for no ICMPv6 reply, length if built, negative value on error.
-+ */
-+static int iptunnel_pmtud_check_icmpv6(struct sk_buff *skb, int mtu)
-+{
-+	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
-+	int stype = ipv6_addr_type(&ip6h->saddr);
-+	u8 proto = ip6h->nexthdr;
-+	__be16 frag_off;
-+	int offset;
-+
-+	if (mtu <= IPV6_MIN_MTU)
-+		return 0;
-+
-+	if (stype == IPV6_ADDR_ANY || stype == IPV6_ADDR_MULTICAST ||
-+	    stype == IPV6_ADDR_LOOPBACK)
-+		return 0;
-+
-+	offset = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &proto,
-+				  &frag_off);
-+	if (offset < 0 || (frag_off & htons(~0x7)))
-+		return 0;
-+
-+	if (proto == IPPROTO_ICMPV6) {
-+		struct icmp6hdr *icmp6h;
-+
-+		if (!pskb_may_pull(skb, skb_network_header(skb) +
-+					offset + 1 - skb->data))
-+			return 0;
-+
-+		icmp6h = (struct icmp6hdr *)(skb_network_header(skb) + offset);
-+		if (icmpv6_is_err(icmp6h->icmp6_type) ||
-+		    icmp6h->icmp6_type == NDISC_REDIRECT)
-+			return 0;
-+	}
-+
-+	return iptunnel_pmtud_build_icmpv6(skb, mtu);
-+}
-+#endif /* IS_ENABLED(CONFIG_IPV6) */
-+
-+/**
-+ * skb_tunnel_check_pmtu() - Check, update PMTU and trigger ICMP reply as needed
-+ * @skb:	Buffer being sent by encapsulation, L2 headers expected
-+ * @encap_dst:	Destination for tunnel encapsulation (outer IP)
-+ * @headroom:	Encapsulation header size, bytes
-+ * @reply:	Build matching ICMP or ICMPv6 message as a result
-+ *
-+ * L2 tunnel implementations that can carry IP and can be directly bridged
-+ * (currently UDP tunnels) can't always rely on IP forwarding paths to handle
-+ * PMTU discovery. In the bridged case, ICMP or ICMPv6 messages need to be built
-+ * based on payload and sent back by the encapsulation itself.
-+ *
-+ * For routable interfaces, we just need to update the PMTU for the destination.
-+ *
-+ * Return: 0 if ICMP error not needed, length if built, negative value on error
-+ */
-+int skb_tunnel_check_pmtu(struct sk_buff *skb, struct dst_entry *encap_dst,
-+			  int headroom, bool reply)
-+{
-+	struct dst_entry *dst = skb_dst(skb);
-+	u32 mtu = dst_mtu(encap_dst) - headroom;
-+
-+	if ((skb_is_gso(skb) && skb_gso_network_seglen(skb) <= mtu) ||
-+	    (!skb_is_gso(skb) && (skb->len - skb_mac_header_len(skb)) <= mtu))
-+		return 0;
-+
-+	if (dst && dst->ops->update_pmtu)
-+		dst->ops->update_pmtu(dst, NULL, skb, mtu);
-+
-+	if (!reply || skb->pkt_type == PACKET_HOST)
-+		return 0;
-+
-+	if (skb->protocol == htons(ETH_P_IP))
-+		return iptunnel_pmtud_check_icmp(skb, mtu);
-+
-+#if IS_ENABLED(CONFIG_IPV6)
-+	if (skb->protocol == htons(ETH_P_IPV6))
-+		return iptunnel_pmtud_check_icmpv6(skb, mtu);
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(skb_tunnel_check_pmtu);
-+
- /* Often modified stats are per cpu, other are shared (netdev->stats) */
- struct rtnl_link_stats64 *ip_tunnel_get_stats64(struct net_device *dev,
- 						struct rtnl_link_stats64 *tot)
---- a/drivers/net/vxlan.c
-+++ b/drivers/net/vxlan.c
-@@ -2076,6 +2076,8 @@ static void vxlan_xmit_one(struct sk_buf
- 		/* Reset the skb_iif to Tunnels interface index */
- 		skb->skb_iif = dev->ifindex;
- 
-+		skb_tunnel_check_pmtu(skb, &rt->dst, VXLAN_HEADROOM, false);
-+
- 		tos = ip_tunnel_ecn_encap(tos, old_iph, skb);
- 		ttl = ttl ? : ip4_dst_hoplimit(&rt->dst);
- 		err = vxlan_xmit_skb(rt, sk, skb, fl4.saddr,
-@@ -2141,6 +2143,8 @@ static void vxlan_xmit_one(struct sk_buf
- 				flags |= VXLAN_F_UDP_ZERO_CSUM6_TX;
- 		}
- 
-+		skb_tunnel_check_pmtu(skb, ndst, VXLAN6_HEADROOM, false);
-+
- 		ttl = ttl ? : ip6_dst_hoplimit(ndst);
- 		err = vxlan6_xmit_skb(ndst, sk, skb, dev, &saddr, &dst->sin6.sin6_addr,
- 				      0, ttl, src_port, dst_port, htonl(vni << 8), md,

feeds/ipq807x/ipq807x/patches/233-vxlan-simplify-RTF_LOCAL-handling.patch

@@ -1,114 +0,0 @@
-From: pravin shelar <pshelar@ovn.org>
-Date: Sun, 13 Nov 2016 20:43:56 -0800
-Subject: [PATCH] vxlan: simplify RTF_LOCAL handling.
-
-Avoid code duplicate code for handling RTF_LOCAL routes.
-
-Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
-Acked-by: Jiri Benc <jbenc@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/vxlan.c
-+++ b/drivers/net/vxlan.c
-@@ -1946,6 +1946,40 @@ static void vxlan_encap_bypass(struct sk
- 	}
- }
- 
-+static int encap_bypass_if_local(struct sk_buff *skb, struct net_device *dev,
-+				 struct vxlan_dev *vxlan, union vxlan_addr *daddr,
-+				 __be32 dst_port, __be32 vni, struct dst_entry *dst,
-+				 u32 rt_flags)
-+{
-+#if IS_ENABLED(CONFIG_IPV6)
-+	/* IPv6 rt-flags are checked against RTF_LOCAL, but the value of
-+	 * RTF_LOCAL is equal to RTCF_LOCAL. So to keep code simple
-+	 * we can use RTCF_LOCAL which works for ipv4 and ipv6 route entry.
-+	 */
-+	BUILD_BUG_ON(RTCF_LOCAL != RTF_LOCAL);
-+#endif
-+	/* Bypass encapsulation if the destination is local */
-+	if (rt_flags & RTCF_LOCAL &&
-+	    !(rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))) {
-+		struct vxlan_dev *dst_vxlan;
-+
-+		dst_release(dst);
-+		dst_vxlan = vxlan_find_vni(vxlan->net, vni,
-+					   daddr->sa.sa_family, dst_port,
-+					   vxlan->flags);
-+		if (!dst_vxlan) {
-+			dev->stats.tx_errors++;
-+			kfree_skb(skb);
-+
-+			return -ENOENT;
-+		}
-+		vxlan_encap_bypass(skb, vxlan, dst_vxlan);
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
- static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
- 			   struct vxlan_rdst *rdst, bool did_rsc)
- {
-@@ -2059,18 +2093,12 @@ static void vxlan_xmit_one(struct sk_buf
- 		}
- 
- 		/* Bypass encapsulation if the destination is local */
--		if (rt->rt_flags & RTCF_LOCAL &&
--		    !(rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))) {
--			struct vxlan_dev *dst_vxlan;
--
--			ip_rt_put(rt);
--			dst_vxlan = vxlan_find_vni(vxlan->net, vni,
--						   dst->sa.sa_family, dst_port,
--						   vxlan->flags);
--			if (!dst_vxlan)
--				goto tx_error;
--			vxlan_encap_bypass(skb, vxlan, dst_vxlan);
--			return;
-+		if (!info) {
-+			err = encap_bypass_if_local(skb, dev, vxlan, dst,
-+						    dst_port, vni, &rt->dst,
-+						    rt->rt_flags);
-+			if (err)
-+				return;
- 		}
- 
- 		/* Reset the skb_iif to Tunnels interface index */
-@@ -2096,7 +2124,6 @@ static void vxlan_xmit_one(struct sk_buf
- 	} else {
- 		struct dst_entry *ndst;
- 		struct in6_addr saddr;
--		u32 rt6i_flags;
- 
- 		if (!vxlan->vn6_sock)
- 			goto drop;
-@@ -2121,19 +2148,14 @@ static void vxlan_xmit_one(struct sk_buf
- 		}
- 
- 		/* Bypass encapsulation if the destination is local */
--		rt6i_flags = ((struct rt6_info *)ndst)->rt6i_flags;
--		if (rt6i_flags & RTF_LOCAL &&
--		    !(rt6i_flags & (RTCF_BROADCAST | RTCF_MULTICAST))) {
--			struct vxlan_dev *dst_vxlan;
-+		if (!info) {
-+			u32 rt6i_flags = ((struct rt6_info *)ndst)->rt6i_flags;
- 
--			dst_release(ndst);
--			dst_vxlan = vxlan_find_vni(vxlan->net, vni,
--						   dst->sa.sa_family, dst_port,
--						   vxlan->flags);
--			if (!dst_vxlan)
--				goto tx_error;
--			vxlan_encap_bypass(skb, vxlan, dst_vxlan);
--			return;
-+			err = encap_bypass_if_local(skb, dev, vxlan, dst,
-+						    dst_port, vni, ndst,
-+						    rt6i_flags);
-+			if (err)
-+				return;
- 		}
- 
- 		if (info) {

feeds/ipq807x/ipq807x/patches/234-vxlan-Support-for-PMTU-discovery-on-directly-bridged.patch

@@ -1,140 +0,0 @@
-From: Stefano Brivio <sbrivio@redhat.com>
-Date: Tue, 4 Aug 2020 07:53:44 +0200
-Subject: [PATCH] vxlan: Support for PMTU discovery on directly bridged links
-
-If the interface is a bridge or Open vSwitch port, and we can't
-forward a packet because it exceeds the local PMTU estimate,
-trigger an ICMP or ICMPv6 reply to the sender, using the same
-interface to forward it back.
-
-If metadata collection is enabled, reverse destination and source
-addresses, so that Open vSwitch is able to match this packet against
-the existing, reverse flow.
-
-v2: Use netif_is_any_bridge_port() (David Ahern)
-
-Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/vxlan.c
-+++ b/drivers/net/vxlan.c
-@@ -1903,7 +1903,7 @@ static struct dst_entry *vxlan6_get_rout
- 
- /* Bypass encapsulation if the destination is local */
- static void vxlan_encap_bypass(struct sk_buff *skb, struct vxlan_dev *src_vxlan,
--			       struct vxlan_dev *dst_vxlan)
-+			       struct vxlan_dev *dst_vxlan, bool snoop)
- {
- 	struct pcpu_sw_netstats *tx_stats, *rx_stats;
- 	union vxlan_addr loopback;
-@@ -1928,7 +1928,7 @@ static void vxlan_encap_bypass(struct sk
- #endif
- 	}
- 
--	if (dst_vxlan->flags & VXLAN_F_LEARN)
-+	if ((dst_vxlan->flags & VXLAN_F_LEARN) && snoop)
- 		vxlan_snoop(skb->dev, &loopback, eth_hdr(skb)->h_source);
- 
- 	u64_stats_update_begin(&tx_stats->syncp);
-@@ -1973,7 +1973,7 @@ static int encap_bypass_if_local(struct
- 
- 			return -ENOENT;
- 		}
--		vxlan_encap_bypass(skb, vxlan, dst_vxlan);
-+		vxlan_encap_bypass(skb, vxlan, dst_vxlan, true);
- 		return 1;
- 	}
- 
-@@ -1990,7 +1990,7 @@ static void vxlan_xmit_one(struct sk_buf
- 	const struct iphdr *old_iph;
- 	struct flowi4 fl4;
- 	union vxlan_addr *dst;
--	union vxlan_addr remote_ip;
-+	union vxlan_addr remote_ip, local_ip;
- 	struct vxlan_metadata _md;
- 	struct vxlan_metadata *md = &_md;
- 	__be16 src_port = 0, dst_port;
-@@ -2006,6 +2006,7 @@ static void vxlan_xmit_one(struct sk_buf
- 		dst_port = rdst->remote_port ? rdst->remote_port : vxlan->cfg.dst_port;
- 		vni = rdst->remote_vni;
- 		dst = &rdst->remote_ip;
-+		local_ip = vxlan->cfg.saddr;
- 	} else {
- 		if (!info) {
- 			WARN_ONCE(1, "%s: Missing encapsulation instructions\n",
-@@ -2015,17 +2016,20 @@ static void vxlan_xmit_one(struct sk_buf
- 		dst_port = info->key.tp_dst ? : vxlan->cfg.dst_port;
- 		vni = be64_to_cpu(info->key.tun_id);
- 		remote_ip.sa.sa_family = ip_tunnel_info_af(info);
--		if (remote_ip.sa.sa_family == AF_INET)
-+		if (remote_ip.sa.sa_family == AF_INET) {
- 			remote_ip.sin.sin_addr.s_addr = info->key.u.ipv4.dst;
--		else
-+			local_ip.sin.sin_addr.s_addr = info->key.u.ipv4.src;
-+		} else {
- 			remote_ip.sin6.sin6_addr = info->key.u.ipv6.dst;
-+			local_ip.sin6.sin6_addr = info->key.u.ipv6.src;
-+		}
- 		dst = &remote_ip;
- 	}
- 
- 	if (vxlan_addr_any(dst)) {
- 		if (did_rsc) {
- 			/* short-circuited back to local bridge */
--			vxlan_encap_bypass(skb, vxlan, vxlan);
-+			vxlan_encap_bypass(skb, vxlan, vxlan, true);
- 			return;
- 		}
- 		goto drop;
-@@ -2104,7 +2108,23 @@ static void vxlan_xmit_one(struct sk_buf
- 		/* Reset the skb_iif to Tunnels interface index */
- 		skb->skb_iif = dev->ifindex;
- 
--		skb_tunnel_check_pmtu(skb, &rt->dst, VXLAN_HEADROOM, false);
-+		err = skb_tunnel_check_pmtu(skb, &rt->dst, VXLAN_HEADROOM,
-+					    netif_is_any_bridge_port(dev));
-+		if (err < 0) {
-+			goto tx_error;
-+		} else if (err) {
-+			if (info) {
-+				struct in_addr src, dst;
-+
-+				src = remote_ip.sin.sin_addr;
-+				dst = local_ip.sin.sin_addr;
-+				info->key.u.ipv4.src = src.s_addr;
-+				info->key.u.ipv4.dst = dst.s_addr;
-+			}
-+			vxlan_encap_bypass(skb, vxlan, vxlan, false);
-+			ip_rt_put(rt);
-+			return;
-+		}
- 
- 		tos = ip_tunnel_ecn_encap(tos, old_iph, skb);
- 		ttl = ttl ? : ip4_dst_hoplimit(&rt->dst);
-@@ -2165,7 +2185,24 @@ static void vxlan_xmit_one(struct sk_buf
- 				flags |= VXLAN_F_UDP_ZERO_CSUM6_TX;
- 		}
- 
--		skb_tunnel_check_pmtu(skb, ndst, VXLAN6_HEADROOM, false);
-+		err = skb_tunnel_check_pmtu(skb, ndst, VXLAN6_HEADROOM,
-+					    netif_is_any_bridge_port(dev));
-+		if (err < 0) {
-+			goto tx_error;
-+		} else if (err) {
-+			if (info) {
-+				struct in6_addr src, dst;
-+
-+				src = remote_ip.sin6.sin6_addr;
-+				dst = local_ip.sin6.sin6_addr;
-+				info->key.u.ipv6.src = src;
-+				info->key.u.ipv6.dst = dst;
-+			}
-+
-+			vxlan_encap_bypass(skb, vxlan, vxlan, false);
-+			ip_rt_put(rt);
-+			return;
-+		}
- 
- 		ttl = ttl ? : ip6_dst_hoplimit(ndst);
- 		err = vxlan6_xmit_skb(ndst, sk, skb, dev, &saddr, &dst->sin6.sin6_addr,

feeds/ipq807x/ipq807x/patches/235-generic-Fix-per-interface-nf_call_iptables-setting.patch

@@ -1,234 +0,0 @@
-From: Sven Eckelmann <sven@open-mesh.com>
-Date: Wed, 2 Sep 2015 19:47:43 +0200
-Subject: generic: Fix per interface nf_call_iptables setting
-
-commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that
-functionality have been disabled - eliminates the overhead of enabling
-CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization
-which should reduce/eliminate the overhead for traffic send over bridges on
-kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization
-breaks the nf_call_iptables per bridge setting which is more fine grained
-than the global sysctl net.bridge.bridge-nf-call-iptables setting.
-
-A test reflecting a real world setup was created to identify if this really
-eliminates the overhead and if per-bridge nf_call_iptables could be used in
-some setups to increase the throughput. A Qualcomm Atheros QCA9558 based
-system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used.
-Cables from the AP to the wifi station were used to reduce interference
-problems during the tests.
-
-The wlan interface was put in one bridge interface called br-wlan. This
-bridge usually contains some more wlan interfaces. The eth0 was put in a
-second bridge called br-lan. This usually contains some other privileged
-wlan or mesh interfaces. Routing was added between br-lan and br-wlan.
-
-Three kernels were tested:
-
- * (default) OpenWrt kernel for this device
- * (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y
- * (brfilter-local)  OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and
-    without 644-bridge_optimize_netfilter_hooks.patch
-
-The changes to the the netfilter settings of the bridge were done via:
-
- * (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1
- * (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables
-   and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables
-
-A station connected to the wlan0 (AP) interface was used to send traffic to
-a PC connected via ethernet. iperf with 3 concurrent transmissions was used
-to generate the traffic.
-
-| kernel          | br-nf-* global | nf-call* iface | download | upload   |
-|-----------------|----------------|----------------|----------|----------|
-| default         | 0              | -              |      209 |      268 |
-| brfilter-global | 0              | -              |      185 |      243 |
-| brfilter-local  | 0              | -              |      187 |      243 |
-| brfilter-local  | 0              | br-lan         |      157 |      226 |
-| brfilter-local  | 0              | br-lan br-wlan |      139 |      161 |
-| brfilter-global | 1              | -              |      136 |      162 |
-
-Download/upload results in Mibit/s
-
-It can be seen that the patch doesn't eliminate the overhead. It can also
-be seen that the throughput of brfilter-global and brfilter-local with
-disabled filtering is the roughly the same. Also the throughput for
-brfilter-global and brfilter-local for enabled filtering on all bridges is
-roughly the same.
-
-But also the brfilter-local throughput is higher when only br-lan requires
-the filtering. This setting would not be possible with
-644-bridge_optimize_netfilter_hooks.patch applied and thus can only be
-compared with brfilter-global and filtering enabled for all interfaces.
-
-Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
-
-Forwarded: https://patchwork.ozlabs.org/patch/513592/
-Applied-Upstream: https://dev.openwrt.org/changeset/46835
-
---- a/net/bridge/br_forward.c
-+++ b/net/bridge/br_forward.c
-@@ -69,7 +69,7 @@ EXPORT_SYMBOL_GPL(br_dev_queue_push_xmit
- 
- int br_forward_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
- {
--	return BR_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING,
-+	return NF_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING,
- 		       net, sk, skb, NULL, skb->dev,
- 		       br_dev_queue_push_xmit);
- 
-@@ -97,7 +97,7 @@ static void __br_deliver(const struct ne
- 		return;
- 	}
- 
--	BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
-+	NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
- 		dev_net(skb->dev), NULL, skb,NULL, skb->dev,
- 		br_forward_finish);
- }
-@@ -121,7 +121,7 @@ static void __br_forward(const struct ne
- 	skb->dev = to->dev;
- 	skb_forward_csum(skb);
- 
--	BR_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD,
-+	NF_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD,
- 		dev_net(indev), NULL, skb, indev, skb->dev,
- 		br_forward_finish);
- }
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -70,7 +70,7 @@ int br_pass_frame_up(struct sk_buff *skb
- 	if (!skb)
- 		return NET_RX_DROP;
- 
--	return BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
-+	return NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
- 		       dev_net(indev), NULL, skb, indev, NULL,
- 		       br_netif_receive_skb);
- }
-@@ -320,7 +320,7 @@ rx_handler_result_t br_handle_frame(stru
- 		}
- 
- 		/* Deliver packet to local host only */
--		if (BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
-+		if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
- 			    dev_net(skb->dev), NULL, skb, skb->dev, NULL,
- 			    br_handle_local_finish)) {
- 			return RX_HANDLER_CONSUMED; /* consumed by filter */
-@@ -337,7 +337,7 @@ forward:
- 			if (ether_addr_equal(p->br->dev->dev_addr, dest))
- 				skb->pkt_type = PACKET_HOST;
- 
--			if (BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, dev_net(skb->dev), NULL,
-+			if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, dev_net(skb->dev), NULL,
- 				skb, skb->dev, NULL, br_handle_local_finish))
- 				break;
- 
-@@ -361,7 +361,7 @@ forward:
- 		if (ether_addr_equal(p->br->dev->dev_addr, dest))
- 			skb->pkt_type = PACKET_HOST;
- 
--		BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
-+		NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
- 			dev_net(skb->dev), NULL, skb, skb->dev, NULL,
- 			br_handle_frame_finish);
- 		break;
---- a/net/bridge/br_multicast.c
-+++ b/net/bridge/br_multicast.c
-@@ -856,7 +856,7 @@ static void __br_multicast_send_query(st
- 
- 	if (port) {
- 		skb->dev = port->dev;
--		BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
-+		NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
- 			dev_net(port->dev), NULL, skb, NULL, skb->dev,
- 			br_dev_queue_push_xmit);
- 	} else {
---- a/net/bridge/br_netfilter_hooks.c
-+++ b/net/bridge/br_netfilter_hooks.c
-@@ -72,15 +72,6 @@ static int brnf_pass_vlan_indev __read_m
- #define IS_ARP(skb) \
- 	(!skb_vlan_tag_present(skb) && skb->protocol == htons(ETH_P_ARP))
- 
--int brnf_call_ebtables __read_mostly;
--EXPORT_SYMBOL_GPL(brnf_call_ebtables);
--
--bool br_netfilter_run_hooks(void)
--{
--	return brnf_call_iptables | brnf_call_ip6tables | brnf_call_arptables |
--		brnf_call_ebtables | brnf_call_custom;
--}
--
- static inline __be16 vlan_proto(const struct sk_buff *skb)
- {
- 	if (skb_vlan_tag_present(skb))
---- a/net/bridge/br_private.h
-+++ b/net/bridge/br_private.h
-@@ -909,29 +909,15 @@ extern const struct nf_br_ops __rcu *nf_
- 
- /* br_netfilter.c */
- #if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
--extern int brnf_call_ebtables;
- int br_nf_core_init(void);
- void br_nf_core_fini(void);
- void br_netfilter_rtable_init(struct net_bridge *);
--bool br_netfilter_run_hooks(void);
- #else
- static inline int br_nf_core_init(void) { return 0; }
- static inline void br_nf_core_fini(void) {}
- #define br_netfilter_rtable_init(x)
--#define br_netfilter_run_hooks()	false
- #endif
- 
--static inline int
--BR_HOOK(uint8_t pf, unsigned int hook, struct net *net, struct sock *sk,
--	struct sk_buff *skb, struct net_device *in, struct net_device *out,
--	int (*okfn)(struct net *, struct sock *, struct sk_buff *))
--{
--	if (!br_netfilter_run_hooks())
--		return okfn(net, sk, skb);
--
--	return NF_HOOK(pf, hook, net, sk, skb, in, out, okfn);
--}
--
- /* br_stp.c */
- void br_log_state(const struct net_bridge_port *p);
- void br_set_state(struct net_bridge_port *p, unsigned int state);
---- a/net/bridge/br_stp_bpdu.c
-+++ b/net/bridge/br_stp_bpdu.c
-@@ -60,7 +60,7 @@ static void br_send_bpdu(struct net_brid
- 
- 	skb_reset_mac_header(skb);
- 
--	BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
-+	NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
- 		dev_net(p->dev), NULL, skb, NULL, skb->dev,
- 		br_send_bpdu_finish);
- }
---- a/net/bridge/netfilter/ebtables.c
-+++ b/net/bridge/netfilter/ebtables.c
-@@ -2416,13 +2416,11 @@ static int __init ebtables_init(void)
- 	}
- 
- 	printk(KERN_INFO "Ebtables v2.0 registered\n");
--	brnf_call_ebtables = 1;
- 	return 0;
- }
- 
- static void __exit ebtables_fini(void)
- {
--	brnf_call_ebtables = 0;
- 	nf_unregister_sockopt(&ebt_sockopts);
- 	xt_unregister_target(&ebt_standard_target);
- 	printk(KERN_INFO "Ebtables v2.0 unregistered\n");
---- a/net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
-+++ b/net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
-@@ -310,7 +310,7 @@ nf_nat_ipv4_fn(void *priv, struct sk_buf
- 		 * nf_bridge will be set and nf_bridge->physoutdev is not null,
- 		 * We can assume that it is not expecting NAT operation.
- 		 *
--		 * when BR_HOOK is enabled, multicast packets will reach
-+		 * when NF_HOOK is enabled, multicast packets will reach
- 		 * postrouting twice,the first time is when it is forwarded
- 		 * between ports of a bridge, the second time is that it is
- 		 * forwarded to upstream port.

feeds/ipq807x/ipq807x/patches/800-GPIO-add-named-gpio-exports.patch

@@ -1,162 +0,0 @@
-From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 30/36] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
- 
- #include "gpiolib.h"
- 
-@@ -450,3 +452,72 @@ void of_gpiochip_remove(struct gpio_chip
- 	gpiochip_remove_pin_ranges(chip);
- 	of_node_put(chip->of_node);
- }
-+
-+#ifdef CONFIG_GPIO_SYSFS
-+
-+static struct of_device_id gpio_export_ids[] = {
-+	{ .compatible = "gpio-export" },
-+	{ /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct device_node *cnp;
-+	u32 val;
-+	int nb = 0;
-+
-+	for_each_child_of_node(np, cnp) {
-+		const char *name = NULL;
-+		int gpio;
-+		bool dmc;
-+		int max_gpio = 1;
-+		int i;
-+
-+		of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+		if (!name)
-+			max_gpio = of_gpio_count(cnp);
-+
-+		for (i = 0; i < max_gpio; i++) {
-+			unsigned flags = 0;
-+			enum of_gpio_flags of_flags;
-+
-+			gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+			if (!gpio_is_valid(gpio))
-+				return gpio;
-+
-+			if (of_flags == OF_GPIO_ACTIVE_LOW)
-+				flags |= GPIOF_ACTIVE_LOW;
-+
-+			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+			else
-+				flags |= GPIOF_IN;
-+
-+			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+				continue;
-+
-+			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+			gpio_export_with_name(gpio, dmc, name);
-+			nb++;
-+		}
-+	}
-+
-+	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+	.driver		= {
-+		.name		= "gpio-export",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(gpio_export_ids),
-+	},
-+	.probe		= of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
-+
-+#endif
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned g
- 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
- 
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- 				   unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get
- 
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
- 
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- 		      struct gpio_desc *desc);
-@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de
- 
- #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
- 
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+			       bool direction_may_change,
-+			       const char *name)
-+{
-+	return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- 			       bool direction_may_change)
- {
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -544,7 +544,7 @@ static struct class gpio_class = {
-  *
-  * Returns zero on success, else an error.
-  */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- 	struct gpio_chip	*chip;
- 	struct gpiod_data	*data;
-@@ -604,6 +604,8 @@ int gpiod_export(struct gpio_desc *desc,
- 	offset = gpio_chip_hwgpio(desc);
- 	if (chip->names && chip->names[offset])
- 		ioname = chip->names[offset];
-+	if (name)
-+		ioname = name;
- 
- 	dev = device_create_with_groups(&gpio_class, chip->dev,
- 					MKDEV(0, 0), data, gpio_groups,
-@@ -625,6 +627,12 @@ err_unlock:
- 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- 	return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+	return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
- 
- static int match_export(struct device *dev, const void *desc)

feeds/ipq807x/ipq807x/patches/801-v4.9-Bluetooth-Fix-using-the-correct-source-address-type.patch

@@ -1,131 +0,0 @@
-From 39385cb5f3274735b03ed1f8e7ff517b02a0beed Mon Sep 17 00:00:00 2001
-From: Johan Hedberg <johan.hedberg@intel.com>
-Date: Sat, 12 Nov 2016 17:03:07 +0200
-Subject: [PATCH] Bluetooth: Fix using the correct source address type
-
-The hci_get_route() API is used to look up local HCI devices, however
-so far it has been incapable of dealing with anything else than the
-public address of HCI devices. This completely breaks with LE-only HCI
-devices that do not come with a public address, but use a static
-random address instead.
-
-This patch exteds the hci_get_route() API with a src_type parameter
-that's used for comparing with the right address of each HCI device.
-
-Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
----
- include/net/bluetooth/hci_core.h |  2 +-
- net/bluetooth/6lowpan.c          |  4 ++--
- net/bluetooth/hci_conn.c         | 26 ++++++++++++++++++++++++--
- net/bluetooth/l2cap_core.c       |  2 +-
- net/bluetooth/rfcomm/tty.c       |  2 +-
- net/bluetooth/sco.c              |  2 +-
- 6 files changed, 30 insertions(+), 8 deletions(-)
-
---- a/include/net/bluetooth/hci_core.h
-+++ b/include/net/bluetooth/hci_core.h
-@@ -1003,7 +1003,7 @@ static inline void hci_set_drvdata(struc
- }
- 
- struct hci_dev *hci_dev_get(int index);
--struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src);
-+struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, u8 src_type);
- 
- struct hci_dev *hci_alloc_dev(void);
- void hci_free_dev(struct hci_dev *hdev);
---- a/net/bluetooth/6lowpan.c
-+++ b/net/bluetooth/6lowpan.c
-@@ -1102,7 +1102,6 @@ static int get_l2cap_conn(char *buf, bda
- {
- 	struct hci_conn *hcon;
- 	struct hci_dev *hdev;
--	bdaddr_t *src = BDADDR_ANY;
- 	int n;
- 
- 	n = sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx %hhu",
-@@ -1113,7 +1112,8 @@ static int get_l2cap_conn(char *buf, bda
- 	if (n < 7)
- 		return -EINVAL;
- 
--	hdev = hci_get_route(addr, src);
-+	/* The LE_PUBLIC address type is ignored because of BDADDR_ANY */
-+	hdev = hci_get_route(addr, BDADDR_ANY, BDADDR_LE_PUBLIC);
- 	if (!hdev)
- 		return -ENOENT;
- 
---- a/net/bluetooth/hci_conn.c
-+++ b/net/bluetooth/hci_conn.c
-@@ -609,7 +609,7 @@ int hci_conn_del(struct hci_conn *conn)
- 	return 0;
- }
- 
--struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src)
-+struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, uint8_t src_type)
- {
- 	int use_src = bacmp(src, BDADDR_ANY);
- 	struct hci_dev *hdev = NULL, *d;
-@@ -630,7 +630,29 @@ struct hci_dev *hci_get_route(bdaddr_t *
- 		 */
- 
- 		if (use_src) {
--			if (!bacmp(&d->bdaddr, src)) {
-+			bdaddr_t id_addr;
-+			u8 id_addr_type;
-+
-+			if (src_type == BDADDR_BREDR) {
-+				if (!lmp_bredr_capable(d))
-+					continue;
-+				bacpy(&id_addr, &d->bdaddr);
-+				id_addr_type = BDADDR_BREDR;
-+			} else {
-+				if (!lmp_le_capable(d))
-+					continue;
-+
-+				hci_copy_identity_address(d, &id_addr,
-+							  &id_addr_type);
-+
-+				/* Convert from HCI to three-value type */
-+				if (id_addr_type == ADDR_LE_DEV_PUBLIC)
-+					id_addr_type = BDADDR_LE_PUBLIC;
-+				else
-+					id_addr_type = BDADDR_LE_RANDOM;
-+			}
-+
-+			if (!bacmp(&id_addr, src) && id_addr_type == src_type) {
- 				hdev = d; break;
- 			}
- 		} else {
---- a/net/bluetooth/l2cap_core.c
-+++ b/net/bluetooth/l2cap_core.c
-@@ -7044,7 +7044,7 @@ int l2cap_chan_connect(struct l2cap_chan
- 	BT_DBG("%pMR -> %pMR (type %u) psm 0x%2.2x", &chan->src, dst,
- 	       dst_type, __le16_to_cpu(psm));
- 
--	hdev = hci_get_route(dst, &chan->src);
-+	hdev = hci_get_route(dst, &chan->src, chan->src_type);
- 	if (!hdev)
- 		return -EHOSTUNREACH;
- 
---- a/net/bluetooth/rfcomm/tty.c
-+++ b/net/bluetooth/rfcomm/tty.c
-@@ -178,7 +178,7 @@ static void rfcomm_reparent_device(struc
- 	struct hci_dev *hdev;
- 	struct hci_conn *conn;
- 
--	hdev = hci_get_route(&dev->dst, &dev->src);
-+	hdev = hci_get_route(&dev->dst, &dev->src, BDADDR_BREDR);
- 	if (!hdev)
- 		return;
- 
---- a/net/bluetooth/sco.c
-+++ b/net/bluetooth/sco.c
-@@ -219,7 +219,7 @@ static int sco_connect(struct sock *sk)
- 
- 	BT_DBG("%pMR -> %pMR", &sco_pi(sk)->src, &sco_pi(sk)->dst);
- 
--	hdev = hci_get_route(&sco_pi(sk)->dst, &sco_pi(sk)->src);
-+	hdev = hci_get_route(&sco_pi(sk)->dst, &sco_pi(sk)->src, BDADDR_BREDR);
- 	if (!hdev)
- 		return -EHOSTUNREACH;
- 

feeds/ipq807x/ipq807x/patches/802-v4.9-Bluetooth-Fix-the-HCI-to-MGMT-status-conversion-tabl.patch

@@ -1,37 +0,0 @@
-From 345bafc04fa2dea44dbdc8bda5633de256a74262 Mon Sep 17 00:00:00 2001
-From: Yu Liu <yudiliu@google.com>
-Date: Mon, 19 Apr 2021 16:53:30 -0700
-Subject: [PATCH] Bluetooth: Fix the HCI to MGMT status conversion table
-
-[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]
-
-0x2B, 0x31 and 0x33 are reserved for future use but were not present in
-the HCI to MGMT conversion table, this caused the conversion to be
-incorrect for the HCI status code greater than 0x2A.
-
-Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
-Signed-off-by: Yu Liu <yudiliu@google.com>
-Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-Signed-off-by: Sasha Levin <sashal@kernel.org>
----
- net/bluetooth/mgmt.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/net/bluetooth/mgmt.c
-+++ b/net/bluetooth/mgmt.c
-@@ -212,12 +212,15 @@ static u8 mgmt_status_table[] = {
- 	MGMT_STATUS_TIMEOUT,		/* Instant Passed */
- 	MGMT_STATUS_NOT_SUPPORTED,	/* Pairing Not Supported */
- 	MGMT_STATUS_FAILED,		/* Transaction Collision */
-+	MGMT_STATUS_FAILED,		/* Reserved for future use */
- 	MGMT_STATUS_INVALID_PARAMS,	/* Unacceptable Parameter */
- 	MGMT_STATUS_REJECTED,		/* QoS Rejected */
- 	MGMT_STATUS_NOT_SUPPORTED,	/* Classification Not Supported */
- 	MGMT_STATUS_REJECTED,		/* Insufficient Security */
- 	MGMT_STATUS_INVALID_PARAMS,	/* Parameter Out Of Range */
-+	MGMT_STATUS_FAILED,		/* Reserved for future use */
- 	MGMT_STATUS_BUSY,		/* Role Switch Pending */
-+	MGMT_STATUS_FAILED,		/* Reserved for future use */
- 	MGMT_STATUS_FAILED,		/* Slot Violation */
- 	MGMT_STATUS_FAILED,		/* Role Switch Failed */
- 	MGMT_STATUS_INVALID_PARAMS,	/* EIR Too Large */

feeds/ipq807x/ipq807x/patches/803-v4.9-Bluetooth-skip-invalid-hci_sync_conn_complete_evt.patch

@@ -1,52 +0,0 @@
-From 433c3febcb837cf8f2758660c6a89e1d734c55dc Mon Sep 17 00:00:00 2001
-From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
-Date: Wed, 28 Jul 2021 15:51:04 +0800
-Subject: [PATCH] Bluetooth: skip invalid hci_sync_conn_complete_evt
-
-[ Upstream commit 92fe24a7db751b80925214ede43f8d2be792ea7b ]
-
-Syzbot reported a corrupted list in kobject_add_internal [1]. This
-happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with
-status 0 are sent for the same HCI connection. This causes us to
-register the device more than once which corrupts the kset list.
-
-As this is forbidden behavior, we add a check for whether we're
-trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple
-times for one connection. If that's the case, the event is invalid, so
-we report an error that the device is misbehaving, and ignore the
-packet.
-
-Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c [1]
-Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
-Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
-Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
-Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-Signed-off-by: Sasha Levin <sashal@kernel.org>
----
- net/bluetooth/hci_event.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/net/bluetooth/hci_event.c
-+++ b/net/bluetooth/hci_event.c
-@@ -3748,6 +3748,21 @@ static void hci_sync_conn_complete_evt(s
- 
- 	switch (ev->status) {
- 	case 0x00:
-+		/* The synchronous connection complete event should only be
-+		 * sent once per new connection. Receiving a successful
-+		 * complete event when the connection status is already
-+		 * BT_CONNECTED means that the device is misbehaving and sent
-+		 * multiple complete event packets for the same new connection.
-+		 *
-+		 * Registering the device more than once can corrupt kernel
-+		 * memory, hence upon detecting this invalid event, we report
-+		 * an error and ignore the packet.
-+		 */
-+		if (conn->state == BT_CONNECTED) {
-+			bt_dev_err(hdev, "Ignoring connect complete event for existing connection");
-+			goto unlock;
-+		}
-+
- 		conn->handle = __le16_to_cpu(ev->handle);
- 		conn->state  = BT_CONNECTED;
- 		conn->type   = ev->link_type;

feeds/ipq807x/ipq807x/patches/804-v4.9-Bluetooth-Fix-debugfs-entry-leak-in-hci_register_dev.patch

@@ -1,33 +0,0 @@
-From 69f728dac41d13fc3e8d4514684e476ebd0d61f5 Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyongjun1@huawei.com>
-Date: Wed, 13 Oct 2021 16:55:46 +0800
-Subject: [PATCH] Bluetooth: Fix debugfs entry leak in hci_register_dev()
-
-[ Upstream commit 5a4bb6a8e981d3d0d492aa38412ee80b21033177 ]
-
-Fault injection test report debugfs entry leak as follows:
-
-debugfs: Directory 'hci0' with parent 'bluetooth' already present!
-
-When register_pm_notifier() failed in hci_register_dev(), the debugfs
-create by debugfs_create_dir() do not removed in the error handing path.
-
-Add the remove debugfs code to fix it.
-
-Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
-Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-Signed-off-by: Sasha Levin <sashal@kernel.org>
----
- net/bluetooth/hci_core.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/net/bluetooth/hci_core.c
-+++ b/net/bluetooth/hci_core.c
-@@ -3420,6 +3420,7 @@ int hci_register_dev(struct hci_dev *hde
- 	return id;
- 
- err_wqueue:
-+	debugfs_remove_recursive(hdev->debugfs);
- 	destroy_workqueue(hdev->workqueue);
- 	destroy_workqueue(hdev->req_workqueue);
- err:

feeds/ipq807x/qca-ssdk/patches/300-fdb.patch

@@ -1,97 +0,0 @@
-Index: qca-ssdk/src/init/ssdk_init.c
-===================================================================
---- qca-ssdk.orig/src/init/ssdk_init.c
-+++ qca-ssdk/src/init/ssdk_init.c
-@@ -137,6 +137,10 @@
- #include "ssdk_scomphy.h"
- #endif
- 
-+#include <linux/debugfs.h>
-+#include "fal/fal_fdb.h"
-+#include "ref/ref_vsi.h"
-+
- #ifdef IN_RFS
- struct rfs_device rfs_dev;
- struct notifier_block ssdk_inet_notifier;
-@@ -2005,10 +2009,81 @@ void ssdk_ess_reset(void)
- 
- char ssdk_driver_name[] = "ess_ssdk";
- 
-+static ssize_t ssdk_flush_mac_write(struct file *f, const char *buffer,
-+				    size_t len, loff_t *offset)
-+{
-+        fal_fdb_entry_t entry;
-+	char data[18];
-+	ssize_t ret;
-+	char mac[6];
-+
-+	ret = simple_write_to_buffer(data, sizeof(data), offset, buffer, len);
-+
-+	if (ret < 0)
-+		return ret;
-+	data[17] = 0;
-+
-+	if (sscanf(data, "%2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx",
-+                                &mac[0], &mac[1], &mac[2], &mac[3],
-+                                &mac[4], &mac[5]) != 6) {
-+		printk("failed to parse mac\n");
-+		return -1;
-+	}
-+
-+	{
-+		fal_fdb_op_t	fdb_op;
-+		fal_fdb_entry_t	fdb_entry;
-+		sw_error_t	ret;
-+
-+		memset(&fdb_op, 0, sizeof(fdb_op));
-+		memset(&fdb_entry, 0, sizeof(fdb_entry));
-+
-+		ret = fal_fdb_entry_extend_getfirst(0, &fdb_op, &fdb_entry);
-+		while (ret == SW_OK) {
-+			/*printk("%s:%s[%d]%d %2x:%2x:%2x:%2x:%2x:%2x | %2x:%2x:%2x:%2x:%2x:%2x\n", __FILE__, __func__, __LINE__,
-+				fdb_entry.fid, fdb_entry.addr.uc[0], fdb_entry.addr.uc[1], fdb_entry.addr.uc[2], fdb_entry.addr.uc[3], fdb_entry.addr.uc[4], fdb_entry.addr.uc[5],
-+				mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);*/
-+			if (!memcmp(mac, &fdb_entry.addr, 6)) {
-+				memset(&entry, 0, sizeof(entry));
-+				memcpy(&entry.addr, mac, ETH_ALEN);
-+				entry.fid = fdb_entry.fid;
-+
-+				if (SW_OK != fal_fdb_entry_del_bymac(0, &entry)) 
-+					printk("failed to delete FDB entry\n");
-+				else
-+					printk("deleted %s/%d\n", data, entry.fid);
-+			}
-+
-+			ret = fal_fdb_entry_extend_getnext(0, &fdb_op, &fdb_entry);
-+		}
-+
-+	}
-+	return len;
-+}
-+
-+const struct file_operations ssdk_flush_mac_fops = {
-+	.owner = THIS_MODULE,
-+	.write = ssdk_flush_mac_write,
-+};
-+
-+static int debugfs_fdb_init(void)
-+{
-+	void *ret;
-+
-+	ret = debugfs_create_file("ssdk_flush_mac", 0644, NULL, NULL,
-+				&ssdk_flush_mac_fops);
-+	if (!ret)
-+		pr_warn("Failed to create ssdk_flush_mac in debugfs");
-+
-+	return 0;
-+}
-+
- static int ssdk_probe(struct platform_device *pdev)
- {
- 	struct device_node *np;
- 
-+	debugfs_fdb_init();
-+
- 	np = of_node_get(pdev->dev.of_node);
- 	if (of_device_is_compatible(np, "qcom,ess-instance"))
- 		return of_platform_populate(np, NULL, NULL, &pdev->dev);

feeds/ipq807x/xtables-addons/Makefile

@@ -1,179 +0,0 @@
-#
-# Copyright (C) 2009-2013 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=xtables-addons
-PKG_VERSION:=2.14
-PKG_RELEASE:=8
-PKG_HASH:=d215a9a8b8e66aae04b982fa2e1228e8a71e7dfe42320df99e34e5000cbdf152
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=@SF/xtables-addons
-PKG_BUILD_DEPENDS:=iptables
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-PKG_CHECK_FORMAT_SECURITY:=0
-
-PKG_MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
-PKG_LICENSE:=GPL-2.0
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/xtables-addons
-  SECTION:=net
-  CATEGORY:=Network
-  SUBMENU:=Firewall
-  TITLE:=Extensions not distributed in the main Xtables
-  URL:=http://xtables-addons.sourceforge.net/
-endef
-
-# uses GNU configure
-
-CONFIGURE_ARGS+= \
-	--with-kbuild="$(LINUX_DIR)" \
-	--with-xtlibdir="/usr/lib/iptables"
-
-ifdef CONFIG_EXTERNAL_TOOLCHAIN
-MAKE_FLAGS:= \
-	$(patsubst ARCH=%,ARCH=$(LINUX_KARCH),$(MAKE_FLAGS)) \
-	DEPMOD="/bin/true"
-
-MAKE_INSTALL_FLAGS:= \
-	$(patsubst ARCH=%,ARCH=$(LINUX_KARCH),$(MAKE_FLAGS)) \
-	DEPMOD="/bin/true"
-else
-define Build/Compile
-	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
-		$(KERNEL_MAKE_FLAGS) \
-		DESTDIR="$(PKG_INSTALL_DIR)" \
-		DEPMOD="/bin/true" \
-		all
-endef
-
-define Build/Install
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		$(KERNEL_MAKE_FLAGS) \
-		DESTDIR="$(PKG_INSTALL_DIR)" \
-		DEPMOD="/bin/true" \
-		install
-endef
-endif
-
-# 1: extension/module suffix used in package name
-# 2: extension/module display name used in package title/description
-# 3: list of extensions to package
-# 4: list of modules to package
-# 5: module load priority
-# 6: module depends
-define BuildTemplate
-
- ifneq ($(3),)
-  define Package/iptables-mod-$(1)
-    $$(call Package/xtables-addons)
-    CATEGORY:=Network
-    TITLE:=$(2) iptables extension
-    DEPENDS:=iptables $(if $(4),+kmod-ipt-$(1))
-  endef
-
-  define Package/iptables-mod-$(1)/install
-	$(INSTALL_DIR) $$(1)/usr/lib/iptables
-	for m in $(3); do \
-		$(CP) \
-			$(PKG_INSTALL_DIR)/usr/lib/iptables/lib$$$$$$$${m}.so \
-			$$(1)/usr/lib/iptables/ ; \
-	done
-  endef
-
-  $$(eval $$(call BuildPackage,iptables-mod-$(1)))
- endif
-
- ifneq ($(4),)
-  define KernelPackage/ipt-$(1)
-    SUBMENU:=Netfilter Extensions
-    TITLE:=$(2) netfilter module
-    DEPENDS:=+kmod-ipt-core $(5)
-    FILES:=$(foreach mod,$(4),$(PKG_BUILD_DIR)/extensions/$(mod).$(LINUX_KMOD_SUFFIX))
-    AUTOLOAD:=$(call AutoProbe,$(notdir $(4)))
-  endef
-
-  $$(eval $$(call KernelPackage,ipt-$(1)))
- endif
-
-endef
-
-
-define Package/iptaccount
-  $(call Package/xtables-addons)
-  CATEGORY:=Network
-  TITLE:=iptables-mod-account control utility
-  DEPENDS:=iptables +iptables-mod-account
-endef
-
-define Package/iptaccount/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/libxt_ACCOUNT_cl.so* \
-		$(1)/usr/lib/
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/sbin/iptaccount \
-		$(1)/usr/sbin/
-endef
-
-
-define Package/iptgeoip
-  $(call Package/xtables-addons)
-  CATEGORY:=Network
-  TITLE:=iptables-mod-geoip support scripts for MaxMind GeoIP databases
-  # we could also use wget-nossl but that's more complicated than our
-  # syntax of dependencies permits...
-  DEPENDS:=iptables +iptables-mod-geoip \
-		+perl +perlbase-getopt +perlbase-io +perl-text-csv_xs \
-		+!BUSYBOX_CONFIG_WGET:wget +!BUSYBOX_CONFIG_GZIP:gzip +!BUSYBOX_CONFIG_UNZIP:unzip
-endef
-
-define Package/iptgeoip/install
-	$(INSTALL_DIR) $(1)/usr/lib/xtables-addons
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/xtables-addons/xt_geoip_{build,dl} \
-		$(1)/usr/lib/xtables-addons/
-	$(INSTALL_DIR) $(1)/usr/share/xt_geoip
-endef
-
-
-#$(eval $(call BuildTemplate,SUFFIX,DESCRIPTION,EXTENSION,MODULE,PRIORITY,DEPENDS))
-
-$(eval $(call BuildTemplate,compat-xtables,API compatibilty layer,,compat_xtables,+IPV6:kmod-ip6tables))
-$(eval $(call BuildTemplate,nathelper-rtsp,RTSP Conntrack and NAT,,rtsp/nf_conntrack_rtsp rtsp/nf_nat_rtsp,+kmod-ipt-conntrack-extra +kmod-ipt-nat))
-
-$(eval $(call BuildTemplate,account,ACCOUNT,xt_ACCOUNT,ACCOUNT/xt_ACCOUNT,+kmod-ipt-compat-xtables))
-$(eval $(call BuildTemplate,chaos,CHAOS,xt_CHAOS,xt_CHAOS,+kmod-ipt-compat-xtables +kmod-ipt-delude +kmod-ipt-tarpit))
-$(eval $(call BuildTemplate,condition,Condition,xt_condition,xt_condition,))
-$(eval $(call BuildTemplate,delude,DELUDE,xt_DELUDE,xt_DELUDE,+kmod-ipt-compat-xtables))
-$(eval $(call BuildTemplate,dhcpmac,DHCPMAC,xt_DHCPMAC,xt_DHCPMAC,+kmod-ipt-compat-xtables))
-$(eval $(call BuildTemplate,dnetmap,DNETMAP,xt_DNETMAP,xt_DNETMAP,+kmod-ipt-compat-xtables +kmod-ipt-nat))
-$(eval $(call BuildTemplate,fuzzy,fuzzy,xt_fuzzy,xt_fuzzy,))
-$(eval $(call BuildTemplate,geoip,geoip,xt_geoip,xt_geoip,))
-$(eval $(call BuildTemplate,iface,iface,xt_iface,xt_iface,))
-$(eval $(call BuildTemplate,ipmark,IPMARK,xt_IPMARK,xt_IPMARK,+kmod-ipt-compat-xtables))
-$(eval $(call BuildTemplate,ipp2p,IPP2P,xt_ipp2p,xt_ipp2p,+kmod-ipt-compat-xtables))
-$(eval $(call BuildTemplate,ipv4options,ipv4options,xt_ipv4options,xt_ipv4options,))
-$(eval $(call BuildTemplate,length2,length2,xt_length2,xt_length2,+kmod-ipt-compat-xtables))
-$(eval $(call BuildTemplate,logmark,LOGMARK,xt_LOGMARK,xt_LOGMARK,+kmod-ipt-compat-xtables))
-$(eval $(call BuildTemplate,lscan,lscan,xt_lscan,xt_lscan,))
-$(eval $(call BuildTemplate,lua,Lua PacketScript,xt_LUA,LUA/xt_LUA,+kmod-ipt-conntrack-extra))
-$(eval $(call BuildTemplate,psd,psd,xt_psd,xt_psd,))
-$(eval $(call BuildTemplate,quota2,quota2,xt_quota2,xt_quota2,))
-$(eval $(call BuildTemplate,sysrq,SYSRQ,xt_SYSRQ,xt_SYSRQ,+kmod-ipt-compat-xtables +kmod-crypto-hash))
-$(eval $(call BuildTemplate,tarpit,TARPIT,xt_TARPIT,xt_TARPIT,+kmod-ipt-compat-xtables))
-
-$(eval $(call BuildPackage,iptaccount))
-$(eval $(call BuildPackage,iptgeoip))

feeds/ipq807x/xtables-addons/patches/001-fix-kernel-version-detection.patch

@@ -1,11 +0,0 @@
---- a/configure.ac
-+++ b/configure.ac
-@@ -44,7 +44,7 @@ regular_CFLAGS="-Wall -Waggregate-return
- 
- if test -n "$kbuilddir"; then
- 	AC_MSG_CHECKING([kernel version that we will build against])
--	krel="$(make -sC "$kbuilddir" M=$PWD kernelrelease | $AWK -v 'FS=[[^0-9.]]' '{print $1; exit}')"
-+	krel="$(make -sC "$kbuilddir" M=$PWD kernelversion | $AWK -v 'FS=[[^0-9.]]' '{print $1; exit}')"
- 	save_IFS="$IFS"
- 	IFS='.'
- 	set x $krel

feeds/ipq807x/xtables-addons/patches/002-build-support-for-Linux-4.15.patch

@@ -1,50 +0,0 @@
-From 2b76b68c65c97fc11409088c3c30993324df8500 Mon Sep 17 00:00:00 2001
-From: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
-Date: Thu, 4 Jan 2018 18:50:50 +0100
-Subject: [PATCH] build: support for Linux 4.15
-
-Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
----
- extensions/pknock/xt_pknock.c | 16 +++++++++++++++-
- 1 file changed, 15 insertions(+), 1 deletion(-)
-
-diff --git a/extensions/pknock/xt_pknock.c b/extensions/pknock/xt_pknock.c
-index 6fbdea4..31d4bc8 100644
---- a/extensions/pknock/xt_pknock.c
-+++ b/extensions/pknock/xt_pknock.c
-@@ -358,10 +358,20 @@ has_logged_during_this_minute(const struct peer *peer)
-  * @r: rule
-  */
- static void
--peer_gc(unsigned long r)
-+peer_gc(
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 15, 0)
-+	struct timer_list *tl
-+#else
-+	unsigned long r
-+#endif
-+)
- {
- 	unsigned int i;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 15, 0)
-+	struct xt_pknock_rule *rule = from_timer(rule, tl, timer);
-+#else
- 	struct xt_pknock_rule *rule = (struct xt_pknock_rule *)r;
-+#endif
- 	struct peer *peer;
- 	struct list_head *pos, *n;
- 
-@@ -469,9 +479,13 @@ add_rule(struct xt_pknock_mtinfo *info)
- 	if (rule->peer_head == NULL)
- 		goto out;
- 
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 15, 0)
-+	timer_setup(&rule->timer, peer_gc, 0);
-+#else
- 	init_timer(&rule->timer);
- 	rule->timer.function	= peer_gc;
- 	rule->timer.data	= (unsigned long)rule;
-+#endif
- 
- 	rule->status_proc = proc_create_data(info->rule_name, 0, pde,
- 	                    &pknock_proc_ops, rule);

feeds/ipq807x/xtables-addons/patches/003-build-add-support-for-Linux-4.18.patch

@@ -1,25 +0,0 @@
-From 3ea761a1ed338241fbc79bef8e433307e108b6cd Mon Sep 17 00:00:00 2001
-From: Jan Engelhardt <jengelh@inai.de>
-Date: Tue, 14 Aug 2018 14:29:30 +0200
-Subject: [PATCH] build: add support for Linux 4.18
-
----
- extensions/xt_DNETMAP.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/extensions/xt_DNETMAP.c b/extensions/xt_DNETMAP.c
-index 1b415c3..de7d4ec 100644
---- a/extensions/xt_DNETMAP.c
-+++ b/extensions/xt_DNETMAP.c
-@@ -367,7 +367,11 @@ dnetmap_tg(struct sk_buff *skb, const struct xt_action_param *par)
- 	__be32 prenat_ip, postnat_ip, prenat_ip_prev;
- 	const struct xt_DNETMAP_tginfo *tginfo = par->targinfo;
- 	const struct nf_nat_range *mr = &tginfo->prefix;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 18, 0)
-+	struct nf_nat_range2 newrange;
-+#else
- 	struct nf_nat_range newrange;
-+#endif
- 	struct dnetmap_entry *e;
- 	struct dnetmap_prefix *p;
- 	__s32 jttl;

feeds/ipq807x/xtables-addons/patches/201-fix-lua-packetscript.patch

@@ -1,127 +0,0 @@
---- a/extensions/LUA/xt_LUA_target.c
-+++ b/extensions/LUA/xt_LUA_target.c
-@@ -19,7 +19,7 @@
- #include <linux/kernel.h>
- #include <linux/slab.h>
- #include <linux/module.h>
--#include <asm/uaccess.h>
-+#include <linux/uaccess.h>
- #include <net/ip.h>
- #include <linux/netfilter/x_tables.h>
- #include "xt_LUA.h"
-@@ -64,10 +64,10 @@ uint32_t  lua_state_refs[LUA_STATE_ARRAY
-  * XT_CONTINUE inside the *register_lua_packet_lib* function.
-  */
- 
--spinlock_t lock = SPIN_LOCK_UNLOCKED;
-+DEFINE_SPINLOCK(lock);
- 
- static uint32_t 
--lua_tg(struct sk_buff *pskb, const struct xt_target_param *par)
-+lua_tg(struct sk_buff *pskb, const struct xt_action_param *par)
- {
- 	uint32_t  verdict;
- 	lua_packet_segment *p;
-@@ -88,11 +88,11 @@ lua_tg(struct sk_buff *pskb, const struc
- 	/* push the lua_packet_segment as a parameter */
- 	p = (lua_packet_segment *)lua_newuserdata(L, sizeof(lua_packet_segment));
- 	if (pskb->mac_header)
--		p->start = pskb->mac_header;
-+		p->start = skb_mac_header(pskb);
- 	else if (pskb->network_header)
--		p->start = pskb->network_header;
-+		p->start = skb_network_header(pskb);
- 	else if (pskb->transport_header)
--		p->start = pskb->transport_header;
-+		p->start = skb_transport_header(pskb);
- 	p->offset = 0;
- 	p->length = (unsigned long)pskb->tail - (unsigned long)p->start;
- 	p->changes = NULL;
-@@ -208,16 +208,16 @@ static bool load_script_into_state(uint3
-  * some workqueue initialization. So far this is done each time this function
-  * is called, subject to change.
-  */
--static bool
-+static int
- lua_tg_checkentry(const struct xt_tgchk_param *par)
- {
- 	const struct xt_lua_tginfo *info = par->targinfo;
- 
- 	if (load_script_into_state(info->state_id, info->script_size, (char *)info->buf)) {
- 		lua_state_refs[info->state_id]++;
--		return true;
-+		return 0;
- 	}
--	return false;
-+	return -EINVAL;
- }
- 
- /*::*
---- a/extensions/LUA/lua/llimits.h
-+++ b/extensions/LUA/lua/llimits.h
-@@ -8,7 +8,6 @@
- #define llimits_h
- 
- #include <stddef.h>
--#include <limits.h>
- 
- #include "lua.h"
- 
---- a/extensions/LUA/lua/lapi.c
-+++ b/extensions/LUA/lua/lapi.c
-@@ -4,9 +4,6 @@
- ** See Copyright Notice in lua.h
- */
- 
--#include <stdarg.h>
--#include <math.h>
--#include <assert.h>
- #include <string.h>
- 
- #define lapi_c
---- a/extensions/LUA/lua/ltable.c
-+++ b/extensions/LUA/lua/ltable.c
-@@ -18,7 +18,6 @@
- ** Hence even when the load factor reaches 100%, performance remains good.
- */
- 
--#include <math.h>
- #include <string.h>
- 
- #define ltable_c
---- a/extensions/LUA/lua/luaconf.h
-+++ b/extensions/LUA/lua/luaconf.h
-@@ -13,8 +13,12 @@
- #if !defined(__KERNEL__)
- #include <limits.h>
- #else
-+#include <linux/kernel.h>
-+
-+#undef UCHAR_MAX
-+#undef BUFSIZ
-+#undef NO_FPU
- #define UCHAR_MAX	255
--#define SHRT_MAX        32767
- #define BUFSIZ 		8192
- #define NO_FPU
- #endif
-@@ -637,6 +641,8 @@ union luai_Cast { double l_d; long l_l;
- */
- #if defined(__KERNEL__)
- #undef LUA_USE_ULONGJMP
-+#define setjmp __builtin_setjmp
-+#define longjmp __builtin_longjmp
- #endif
- 
- #if defined(__cplusplus)
---- a/extensions/LUA/lua/llex.h
-+++ b/extensions/LUA/lua/llex.h
-@@ -10,6 +10,8 @@
- #include "lobject.h"
- #include "lzio.h"
- 
-+/* prevent conflict with definition from asm/current.h */
-+#undef current
- 
- #define FIRST_RESERVED	257
- 

feeds/ipq807x/xtables-addons/patches/300-geoip-endian-detection.patch

@@ -1,18 +0,0 @@
---- a/extensions/libxt_geoip.c
-+++ b/extensions/libxt_geoip.c
-@@ -59,13 +59,13 @@ geoip_get_subnets(const char *code, uint
- 
- 	/* Use simple integer vector files */
- 	if (nfproto == NFPROTO_IPV6) {
--#if __BYTE_ORDER == _BIG_ENDIAN
-+#if BYTE_ORDER == BIG_ENDIAN
- 		snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/BE/%s.iv6", code);
- #else
- 		snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/LE/%s.iv6", code);
- #endif
- 	} else {
--#if __BYTE_ORDER == _BIG_ENDIAN
-+#if BYTE_ORDER == BIG_ENDIAN
- 		snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/BE/%s.iv4", code);
- #else
- 		snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/LE/%s.iv4", code);

feeds/mcu/mcu-firmware/Makefile

@@ -1,128 +0,0 @@
-#
-# Copyright (C) 2023 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=mcu-firmware
-PKG_VERSION:=2023-03-05
-PKG_RELEASE:=1
-
-PKG_MAINTAINER:=Piotr Dymacz <pepe2k@gmail.com>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mcu-fw-default
-  CATEGORY:=Firmware
-  SUBMENU:=MCU firmware
-  SECTION:=firmware
-  TITLE:=MCU firmware
-endef
-
-
-# Zephyr versions
-# 4 fields separated with underscore:
-#   version-name_git-sha_pipeline-id_sha256-of-package
-ZEPHYR_VERSIONS := \
-	zephyr-v3.3.x_7055d10e538e_3877473859_321a0daf6328698a913c6504d19aa85a5170dfce6039b86d31d2e9162d34af7c \
-	zephyr-main_63d7f67d401d_3877472923_e44948759ad705f8a28449760ec3153f81d3620e0d3665e50490c7786dd2f8e2
-
-ZEPHYR_FW_CI_URL := https://gitlab.com/pepe2k/zephyr/-/jobs/
-
-# Zephyr 'hello_world' targets
-ZEPHYR_HELLO_WORLD_TARGETS := \
-	cig_wf196_nrf52833 \
-	edgecore_eap102_nrf52840 \
-	nrf52840dongle_nrf52840
-
-# Zephyr 'hci_uart' targets
-ZEPHYR_HCI_UART_TARGETS:= \
-	cig_wf196_nrf52833 \
-	edgecore_eap102_nrf52840 \
-	nrf52840dongle_nrf52840
-
-# Zephyr 'hci_usb' targets
-ZEPHYR_HCI_USB_TARGETS := \
-	edgecore_eap102_nrf52840 \
-	nrf52840dongle_nrf52840
-
-word-underscore = $(word $2,$(subst _, ,$1))
-
-define Download/zephyr-fw
-  URL:=$(ZEPHYR_FW_CI_URL)$(call word-underscore,$(2),3)/
-  URL_FILE:=artifacts/download?file_type=archive
-  FILE:=$(call word-underscore,$(2),1)-$(call word-underscore,$(2),2).zip
-  HASH:=$(call word-underscore,$(2),4)
-endef
-$(foreach FW,$(ZEPHYR_VERSIONS),$(eval $(call Download,zephyr-fw,$(FW))))
-
-# $(1) version (e.g zephyr-v3.3.x)
-# $(2) firmware name (e.g. hci_usb)
-# $(3) target/board name (e.g. nrf52840dongle_nrf52840)
-define zephyr-fw
-  define Package/$(1)-$(2)-$(3)
-    $(call Package/mcu-fw-default)
-    DEPENDS:=+mcu $(call zephyr-fw-deps,$(2))
-    TITLE:=Zephyr '$(2)'
-  endef
-
-  define Package/$(1)-$(2)-$(3)/description
-    Zephyr '$(1)' based firmware '$(2)' for '$(3)' board
-  endef
-
-  define Package/$(1)-$(2)-$(3)/install
-	$(INSTALL_DIR) $$(1)/lib/firmware/mcu/$(3)/$(1)__$(2)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(1)/$(3)/$(1)__$(2)/*.bin \
-		$$(1)/lib/firmware/mcu/$(3)/$(1)__$(2)/
-  endef
-endef
-
-define zephyr-fw-deps
-	$(if $(findstring hci_u,$1),+bluez-daemon +kmod-bluetooth +kmod-crypto-user)
-endef
-
-define zephyr-fw-unzip
-	mkdir -p $(PKG_BUILD_DIR)/$(call word-underscore,$(1),1); \
-	unzip -q -d $(PKG_BUILD_DIR)/$(call word-underscore,$(1),1) \
-	  $(DL_DIR)/$(call word-underscore,$(1),1)-$(call word-underscore,$(1),2).zip; \
-	for fw in $(PKG_BUILD_DIR)/$(call word-underscore,$(1),1)/*.tar.gz; do \
-		$(TAR) -C $(PKG_BUILD_DIR)/$(call word-underscore,$(1),1) --one-top-level -xzf $$$$fw; \
-		rm -rf $$$$fw; \
-	done;
-endef
-
-define Build/Prepare
-	$(foreach FW,$(ZEPHYR_VERSIONS),$(call zephyr-fw-unzip,$(FW)))
-endef
-
-define Build/Compile
-endef
-
-
-$(foreach VER,$(ZEPHYR_VERSIONS),\
-  $(foreach TARGET,$(ZEPHYR_HELLO_WORLD_TARGETS),\
-    $(eval $(call zephyr-fw,$(call word-underscore,$(VER),1),hello_world,$(TARGET)))))
-
-$(foreach VER,$(ZEPHYR_VERSIONS),\
-  $(foreach TARGET,$(ZEPHYR_HCI_UART_TARGETS),\
-    $(eval $(call zephyr-fw,$(call word-underscore,$(VER),1),hci_uart,$(TARGET)))))
-
-$(foreach VER,$(ZEPHYR_VERSIONS),\
-  $(foreach TARGET,$(ZEPHYR_HCI_USB_TARGETS),\
-    $(eval $(call zephyr-fw,$(call word-underscore,$(VER),1),hci_usb,$(TARGET)))))
-
-
-$(foreach VER,$(ZEPHYR_VERSIONS),\
-  $(foreach TARGET,$(ZEPHYR_HELLO_WORLD_TARGETS),\
-    $(eval $(call BuildPackage,$(call word-underscore,$(VER),1)-hello_world-$(TARGET)))))
-
-$(foreach VER,$(ZEPHYR_VERSIONS),\
-  $(foreach TARGET,$(ZEPHYR_HCI_UART_TARGETS),\
-    $(eval $(call BuildPackage,$(call word-underscore,$(VER),1)-hci_uart-$(TARGET)))))
-
-$(foreach VER,$(ZEPHYR_VERSIONS),\
-  $(foreach TARGET,$(ZEPHYR_HCI_USB_TARGETS),\
-    $(eval $(call BuildPackage,$(call word-underscore,$(VER),1)-hci_usb-$(TARGET)))))

feeds/mcu/mcu/Makefile

@@ -1,50 +0,0 @@
-#
-# Copyright (C) 2023 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=mcu
-PKG_VERSION:=2023-03-05
-PKG_RELEASE=1
-
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Piotr Dymacz <pepe2k@gmail.com>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mcu
-  TITLE:=Generic OpenWrt/OpenWiFi MCU config and management handler
-  CATEGORY:=Utilities
-  DEPENDS:=+umcumgr +libubox
-  SECTION:=utils
-endef
-
-define Package/mcu/conffiles
-  /etc/config/mcu
-endef
-
-define Build/Compile
-endef
-
-define Package/mcu/install
-	$(INSTALL_DIR) $(1)/etc/init.d $(1)/etc/hotplug.d/usb $(1)/lib/functions $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/mcu.init $(1)/etc/init.d/mcu
-	$(INSTALL_DATA) ./files/mcu.hotplug $(1)/etc/hotplug.d/usb/30-mcu
-	$(INSTALL_DATA) ./files/mcu.sh $(1)/lib/functions
-	$(if $(wildcard ./files/uci-defaults/$(BOARD)_$(SUBTARGET)), \
-		$(INSTALL_DATA) ./files/uci-defaults/$(BOARD)_$(SUBTARGET) \
-		$(1)/etc/uci-defaults/20-mcu, \
-		$(if $(wildcard ./files/uci-defaults/$(BOARD)), \
-			$(INSTALL_DATA) ./files/uci-defaults/$(BOARD) \
-			$(1)/etc/uci-defaults/20-mcu \
-		) \
-	)
-endef
-
-$(eval $(call BuildPackage,mcu))

feeds/mcu/mcu/files/example.config

@@ -1,32 +0,0 @@
-config mcu 'uart_no_hw_flow'
-	option interface	'uart'
-	option bootloader	'mcuboot'
-	option enable_pin	'mcu-enable'
-	option uart_path	'/dev/ttyMSM1'
-	option uart_baud	'115200'
-	option firmware		'zephyr-main__hello_world'
-	option disabled		'1'
-
-config mcu 'uart_with_hw_flow'
-	option interface	'uart'
-	option bootloader	'mcuboot'
-	option enable_pin	'mcu-enable'
-	option uart_path	'/dev/ttyMSM1'
-	option uart_baud	'1000000'
-	option uart_flow	'1'
-	option firmware		'zephyr-main__hello_world'
-	option disabled		'1'
-
-config mcu 'usb_with_enable_pin'
-	option interface	'usb'
-	option bootloader	'mcuboot'
-	option enable_pin	'mcu-enable'
-	option firmware		'zephyr-main__hello_world'
-	option disabled		'1'
-
-config mcu 'usb_no_enable_pin'
-	option interface	'usb'
-	option bootloader	'mcuboot'
-	option sn		'ABCDEF1234567890'
-	option firmware		'zephyr-main__hello_world'
-	option disabled		'1'

feeds/mcu/mcu/files/mcu.hotplug

@@ -1,122 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/mcu.sh
-
-MCU_SCRIPT_NAME="mcu-hotplug"
-MCU_CFG_FOUND="0"
-
-mcu_hotplug_setup() {
-	local sn
-	local disabled
-
-	local sn_dev="$2"
-	local uart="$3"
-
-	SECT="$1"
-
-	[ "$MCU_CFG_FOUND" = "1" ] && return 0
-
-	config_get sn "$SECT" sn
-	[ "$sn" != "$sn_dev" ] && return 0
-
-	MCU_SCRIPT_NAME="mcu-hotplug.${SECT}"
-	MCU_CFG_FOUND="1"
-
-	mcu_logi "found matching config section '$SECT'"
-
-	# Section disabled?
-	config_get_bool disabled "$SECT" disabled "0"
-	[ "$disabled" = "1" ] && {
-		mcu_logw "section is disabled in config"
-		return 0
-	}
-
-	mcu_sn_check_and_update "$sn" "$uart"
-	[ $? -ne 0 ] && return 1
-
-	mcu_fw_check_and_update "$uart"
-	[ $? -ne 0 ] && return 1
-}
-
-# We are looking for ttyACM with specific product name and USB VID:PID
-[ "$ACTION" = "add" -a \
-  "$DRIVER" = "cdc_acm" -a \
-  "$DEVTYPE" = "usb_interface" ] && {
-
-	usb_path="/sys/bus/usb/devices/"
-	dev="$(echo "$DEVICENAME" | cut -d ':' -f 1)"
-	[ -n "$dev" ] || return 1
-
-	p="$(cat "${usb_path}/${dev}/product" 2>/dev/null)"
-	id="$(cat "${usb_path}/${dev}/idVendor" 2>/dev/null)"
-	id="${id}$(cat "${usb_path}//${dev}/idProduct" 2>/dev/null)"
-	sn="$(cat "${usb_path}/${dev}/serial" 2>/dev/null)"
-
-	[ "$p" = "$MCUBOOT_USB_PRODUCT" -a \
-	 "$id" = "$MCUBOOT_USB_VID_PID" ] || return 0
-
-	mcu_logi "found compatible MCU with S/N '$sn' at USB bus '$dev'"
-
-	MCU_SYSINFO_OUTPUT=""
-	MCU_IMGLIST_OUTPUT=""
-
-	# We expect just a single ttyACM interface
-	usb_path="/sys/bus/usb/devices/${dev}*/tty/*"
-	for tty in $usb_path; do
-		[ -c "/dev/$(basename "$tty")" ] && {
-			uart_path="/dev/$(basename "$tty")"
-			break
-		}
-	done
-
-	[ -n "$uart_path" ] || {
-		mcu_loge "failed to find ttyACM interface"
-		return 1
-	}
-
-	# Try to acquire lock (init script might be handling this device)
-	exec 9>"$MCU_FLOCK_FILE" || return 1
-	flock -n 9 || {
-		mcu_logd "lock taken by init script, skipping"
-		return 1
-	}
-
-	config_load mcu
-	config_foreach mcu_hotplug_setup mcu "$sn" "$uart_path"
-
-	# Add new config section for this MCU if no matching found (by S/N)
-	[ "$MCU_CFG_FOUND" = "0" ] && {
-		MCU_SCRIPT_NAME="mcu-hotplug"
-
-		sect="${sn:0:8}_usb"
-		mcu_logi "no matching MCU config found, adding new (disabled): '$sect'"
-
-		[ -d /etc/config-shadow ] && {
-			uci -c /etc/config-shadow -q batch <<-EOF
-				set mcu.${sect}=mcu
-				set mcu.${sect}.interface=usb
-				set mcu.${sect}.bootloader=mcuboot
-				set mcu.${sect}.sn=$sn
-				set mcu.${sect}.disabled=1
-				EOF
-
-			uci -c /etc/config-shadow -q commit mcu
-		}
-
-		uci -q batch <<-EOF
-			set mcu.${sect}=mcu
-			set mcu.${sect}.interface=usb
-			set mcu.${sect}.bootloader=mcuboot
-			set mcu.${sect}.sn=$sn
-			set mcu.${sect}.disabled=1
-			EOF
-
-		uci -q commit mcu
-
-		flock -u 9
-		return 0
-	}
-
-	flock -u 9
-}

feeds/mcu/mcu/files/mcu.init

@@ -1,254 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-
-. /lib/functions/mcu.sh
-
-SECT=
-
-mcu_setup_uart() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-	local gpio_path="$4"
-	local gpio_on="$5"
-	local sn="$6"
-
-	# Take out MCU out of reset and read basic info
-	mcu_enable_pin_set "$gpio_path" "$gpio_on"
-	sleep 1
-
-	mcu_sn_check_and_update "$sn" "$uart" "$baud" "$flow"
-	[ $? -ne 0 ] && return 1
-
-	mcu_fw_check_and_update "$uart" "$baud" "$flow"
-	[ $? -ne 0 ] && return 1
-}
-
-mcu_setup_usb() {
-	local gpio_path="$1"
-	local gpio_on="$2"
-	local sn="$3"
-	local gpio_off="0"
-
-	local uart
-
-	[ "$gpio_on" = "0" ] && gpio_off="1"
-
-	# If we have S/N in config, only take out the MCU from reset
-	[ -n "$sn" ] && {
-		mcu_logi "MCU S/N already set, hotplug will perform config"
-		mcu_enable_pin_set "$gpio_path" "$gpio_on"
-		return 0
-	}
-
-	# If S/N is missing, we need to take out MCU from reset, find out
-	# its S/N and save it for later
-
-	exec 9>"$MCU_FLOCK_FILE" || {
-		mcu_loge "failed to obtain lock (exec fail)!"
-		return 1
-	}
-
-	flock -n 9 || {
-		mcu_loge "failed to obtain lock (flock fail)!"
-		return 1
-	}
-
-	usb_path="/sys/bus/usb/devices/*"
-	devs_old=""
-	for dev_path in $usb_path; do
-		dev="$(basename "$dev_path")"
-		[[ $dev == *":"* ]] && continue
-
-		p="$(cat "${dev_path}/product" 2>/dev/null)"
-		id="$(cat "${dev_path}/idVendor" 2>/dev/null)"
-		id="${id}$(cat "${dev_path}/idProduct" 2>/dev/null)"
-
-		[ "$p" = "$MCUBOOT_USB_PRODUCT" -a \
-		 "$id" = "$MCUBOOT_USB_VID_PID" ] && \
-			devs_old="$devs_old $dev"
-	done
-
-	mcu_enable_pin_set "$gpio_path" "$gpio_on"
-	sleep 2
-
-	dev_found=""
-	for dev_path in $usb_path; do
-		dev="$(basename "$dev_path")"
-		[[ $dev == *":"* ]] && continue
-
-		p="$(cat "${dev_path}/product" 2>/dev/null)"
-		id="$(cat "${dev_path}/idVendor" 2>/dev/null)"
-		id="${id}$(cat "${dev_path}/idProduct" 2>/dev/null)"
-
-		[ "$p" = "$MCUBOOT_USB_PRODUCT" -a \
-		 "$id" = "$MCUBOOT_USB_VID_PID" ] && {
-			[ -n "$devs_old" ] && {
-				if echo "$devs_old" | grep -q "$dev"; then
-					continue
-				fi
-			}
-
-			dev_found="$dev"
-			break
-		}
-	done
-
-	[ -n "$dev_found" ] || {
-		mcu_loge "failed to find MCU on USB bus"
-		mcu_enable_pin_set "$gpio_path" "$gpio_off"
-
-		flock -u 9
-		return 1
-	}
-
-	mcu_logd "MCU found on USB bus: '$dev_found'"
-
-	# We expect just a single ttyACM interface
-	usb_path="/sys/bus/usb/devices/${dev_found}*/tty/*"
-	for tty_path in $usb_path; do
-		tty="$(basename "$tty_path")"
-		[ -c "/dev/${tty}" ] && {
-			uart="/dev/${tty}"
-			break
-		}
-	done
-
-	[ -n "$uart" ] || {
-		mcu_loge "failed to find ttyACM interface"
-		mcu_enable_pin_set "$gpio_path" "$gpio_off"
-
-		flock -u 9
-		return 1
-	}
-
-	mcu_sn_check_and_update "$sn" "$uart"
-	[ $? -ne 0 ] && {
-		mcu_enable_pin_set "$gpio_path" "$gpio_off"
-
-		flock -u 9
-		return 1
-	}
-
-	mcu_fw_check_and_update "$uart"
-	[ $? -ne 0 ] && {
-		mcu_enable_pin_set "$gpio_path" "$gpio_off"
-
-		flock -u 9
-		return 1
-	}
-
-	flock -u 9
-}
-
-mcu_setup() {
-	local sn
-	local disabled
-	local uart_baud
-	local uart_flow
-	local uart_path
-	local interface
-	local bootloader
-	local enable_pin
-	local gpio_path
-
-	local gpio_on="1"
-	local gpio_off="0"
-
-	SECT="$1"
-	MCU_SCRIPT_NAME="mcu-init.${SECT}"
-
-	MCU_SYSINFO_OUTPUT=""
-	MCU_IMGLIST_OUTPUT=""
-
-	# Section disabled?
-	config_get_bool disabled "$SECT" disabled "0"
-	[ "$disabled" = "1" ] && {
-		mcu_logw "section is disabled in config"
-		return 0
-	}
-
-	config_get sn "$SECT" sn
-	config_get bootloader "$SECT" bootloader
-	config_get enable_pin "$SECT" enable_pin
-	config_get interface "$SECT" interface
-	config_get uart_path "$SECT" uart_path
-	config_get uart_baud "$SECT" uart_baud "115200"
-	config_get_bool uart_flow "$SECT" uart_flow "0"
-
-	# As for now, only 'mcuboot' bootloader is supported
-	case "$bootloader" in
-	"mcuboot")
-		command -v umcumgr > /dev/null 2>&1 || {
-			mcu_loge "missing 'umcumgr' tool"
-			return 1
-		}
-		;;
-	*)
-		mcu_loge "unsupported or unset 'bootloader' option"
-		return 1
-		;;
-	esac
-
-	# Verify 'enable_pin' option
-	if [ -z "$enable_pin" ]; then
-		# USB based MCU without GPIO based way for reset are fully
-		# handled by the hotplug script
-		[ "$interface" = "usb" ] && {
-			mcu_logw "'enable_pin' option is unset, ignoring"
-			return 0
-		}
-
-		[ "$interface" = "uart" ] && {
-			mcu_loge "'enable_pin' option is unset"
-			return 1
-		}
-	else
-		gpio_path="/sys/class/gpio/${enable_pin}"
-		[ -d "$gpio_path" ] || {
-			mcu_loge "invalid 'enable_pin' option"
-			return 1
-		}
-
-		[ "$(cat "${gpio_path}/active_low")" = "1" ] && {
-			gpio_on="0"
-			gpio_off="1"
-		}
-
-		# TODO: should we maybe bail out here if the MCU was took out
-		#       of reset already before, by something/someone else?
-		[ "$(cat "${gpio_path}/value")" = "$gpio_on" ] && {
-			mcu_logw "MCU already enabled, resetting"
-			mcu_enable_pin_set "$gpio_path" "$gpio_off"
-			sleep 1
-		}
-	fi
-
-	# For now only 'usb' and 'uart' interfaces are supported
-	case "$interface" in
-	"uart")
-		[ -z "$uart_path" -o ! -c "$uart_path" ] && {
-			mcu_loge "invalid or unset 'uart_path' option"
-			return 1
-		}
-
-		mcu_setup_uart "$uart_path" "$uart_baud" "$uart_flow" \
-			       "$gpio_path" "$gpio_on" "$sn"
-		;;
-	"usb")
-		mcu_setup_usb "$gpio_path" "$gpio_on" "$sn"
-		;;
-	*)
-		mcu_loge "unsupported or unset 'interface' option"
-		return 1
-		;;
-	esac
-}
-
-start() {
-	config_load mcu
-	config_foreach mcu_setup mcu
-
-	return 0
-}

feeds/mcu/mcu/files/mcu.sh

@@ -1,541 +0,0 @@
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-
-# Product name and VID:PID used by OpenWrt/OpenWiFi MCUboot fork
-MCUBOOT_USB_PRODUCT="MCUboot serial recovery"
-MCUBOOT_USB_VID_PID="16c005e1"
-
-MCU_FW_DIR="/lib/firmware/mcu/"
-MCU_FLOCK_FILE="/tmp/lock/mcu"
-
-MCU_SYSINFO_OUTPUT=
-MCU_IMGLIST_OUTPUT=
-
-MCU_SCRIPT_NAME=""
-
-# logger helpers
-mcu_log() {
-	if [ -n "$MCU_SCRIPT_NAME" ]; then
-		logger -p "$1" -t "${MCU_SCRIPT_NAME}[$$]" "$2"
-	else
-		logger -p "$1" "$2"
-	fi
-}
-
-mcu_loge() {
-	mcu_log "err" "$1"
-}
-
-mcu_logd() {
-	mcu_log "debug" "$1"
-}
-
-mcu_logi() {
-	mcu_log "info" "$1"
-}
-
-mcu_logn() {
-	mcu_log "notice" "$1"
-}
-
-mcu_logw() {
-	mcu_log "warn" "$1"
-}
-
-_mcu_get_fwlist() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	if [ "$flow" = "1" ]; then
-		flow=" -f"
-	else
-		flow=""
-	fi
-
-	[ -n "$baud" ] || baud="115200"
-
-	MCU_IMGLIST_OUTPUT="$(umcumgr -s -d "$uart" -b "$baud$flow" list)"
-	[ $? -eq 0 ] || return 1
-}
-
-_mcu_get_fwmetadata() {
-	local slot="$1"
-	local uart="$2"
-	local baud="$3"
-	local flow="$4"
-
-	local value
-
-	[ -n "$MCU_IMGLIST_OUTPUT" ] || {
-		_mcu_get_fwlist "$uart" "$baud" "$flow" || {
-			mcu_loge "request 'list' failed (uart='$uart', baud='$baud', flow='$flow')"
-			return 1
-		}
-	}
-
-	if [ "$slot" = "0" ]; then
-		slot="slot0_metadata"
-	else
-		slot="slot1_metadata"
-	fi
-
-	value="$(echo "$MCU_IMGLIST_OUTPUT" | grep "$slot=" | cut -d '=' -f 2)"
-	echo "$value"
-}
-
-_mcu_get_sysinfo() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	if [ "$flow" = "1" ]; then
-		flow=" -f"
-	else
-		flow=""
-	fi
-
-	[ -n "$baud" ] || baud="115200"
-
-	MCU_SYSINFO_OUTPUT="$(umcumgr -s -d "$uart" -b "$baud$flow" sysinfo)"
-	[ $? -eq 0 ] || return 1
-}
-
-_mcu_get() {
-	local field="$1"
-	local uart="$2"
-	local baud="$3"
-	local flow="$4"
-
-	local value
-
-	[ -n "$MCU_SYSINFO_OUTPUT" ] || {
-		_mcu_get_sysinfo "$uart" "$baud" "$flow" || {
-			mcu_loge "request 'sysinfo' failed (uart='$uart', baud='$baud', flow='$flow')"
-			return 1
-		}
-	}
-
-	value="$(echo "$MCU_SYSINFO_OUTPUT" | grep "$field=" | cut -d '=' -f 2)"
-	echo "$value"
-}
-
-mcu_get_sn() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	local value
-
-	value="$(_mcu_get "serial_num" "$uart" "$baud" "$flow")"
-	[ $? -eq 0 ] || return 1
-
-	[ -n "$value" ] && mcu_logd "MCU S/N: '$value'"
-	echo "$value"
-}
-
-mcu_get_board() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	local value
-
-	value="$(_mcu_get "board" "$uart" "$baud" "$flow")"
-	[ $? -eq 0 ] || return 1
-
-	[ -n "$value" ] && mcu_logd "MCU board: '$value'"
-	echo "$value"
-}
-
-mcu_get_slotsnum() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	local value
-
-	value="$(_mcu_get "single_slot" "$uart" "$baud" "$flow")"
-	[ $? -eq 0 ] || return 1
-
-	[ -n "$value" ] || value="1"
-	[ "$value" != "1" ] && value="2"
-
-	[ -n "$value" ] && mcu_logd "number of firmware slots: '$value'"
-	echo "$value"
-}
-
-mcu_get_softver() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	local value
-
-	value="$(_mcu_get "soft_ver" "$uart" "$baud" "$flow")"
-	[ $? -eq 0 ] || return 1
-
-	[ -n "$value" ] && mcu_logd "MCUboot version: '$value'"
-	echo "$value"
-}
-
-mcu_get_activeslot() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	local value
-
-	value="$(_mcu_get "active_slot" "$uart" "$baud" "$flow")"
-	[ $? -eq 0 ] || return 1
-
-	[ -n "$value" ] && mcu_logd "active firmware slot: '$value'"
-	echo "$value"
-}
-
-mcu_get_fwname() {
-	local slot="$1"
-	local uart="$2"
-	local baud="$3"
-	local flow="$4"
-
-	local value
-	local metadata
-
-	metadata="$(_mcu_get_fwmetadata "$slot" "$uart" "$baud" "$flow")"
-	[ $? -eq 0 ] || return 1
-
-	[ -n "$metadata" ] && {
-		json_load "$metadata"
-		json_get_var value fw_name
-	}
-
-	if [ -n "$value" ]; then
-		mcu_logi "firmware installed in slot '$slot': '$value'"
-	else
-		mcu_logw "no firmware installed in slot '$slot'"
-	fi
-
-	echo "$value"
-}
-
-mcu_req_boot() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	if [ "$flow" = "1" ]; then
-		flow=" -f"
-	else
-		flow=""
-	fi
-
-	[ -n "$baud" ] || baud="115200"
-
-	umcumgr -s -d "$uart" -b "$baud$flow" boot || {
-		mcu_loge "request 'boot' failed"
-		return 1
-	}
-
-	mcu_logi "MCU requested to boot the firmware"
-}
-
-mcu_req_reset() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	if [ "$flow" = "1" ]; then
-		flow=" -f"
-	else
-		flow=""
-	fi
-
-	[ -n "$baud" ] || baud="115200"
-
-	# Request warm reset of the MCU
-	umcumgr -s -d "$uart" -b "$baud$flow" reset || {
-		mcu_loge "request 'reset' failed"
-		return 1
-	}
-
-	mcu_logi "MCU requested to reset"
-}
-
-mcu_sel_slot() {
-	local slot="$1"
-	local uart="$2"
-	local baud="$3"
-	local flow="$4"
-
-	if [ "$flow" = "1" ]; then
-		flow=" -f"
-	else
-		flow=""
-	fi
-
-	[ -n "$baud" ] || baud="115200"
-
-	# Request firmware active slot change
-	umcumgr -s -d "$uart" -b "$baud$flow" select "$slot" || {
-		mcu_loge "request 'select slot' failed"
-		return 1
-	}
-
-	mcu_logi "active firmware slot changed to: '$slot'"
-}
-
-mcu_fw_upload() {
-	local board="$1"
-	local slot="$2"
-	local fw_name="$3"
-	local uart="$4"
-	local baud="$5"
-	local flow="$6"
-
-	local fw_path
-
-	if [ "$flow" = "1" ]; then
-		flow=" -f"
-	else
-		flow=""
-	fi
-
-	[ -n "$baud" ] || baud="115200"
-
-	fw_path="${MCU_FW_DIR}/${board}/${fw_name}/slot${slot}.bin"
-	umcumgr -q info "$fw_path" > /dev/null 2>&1 || {
-		mcu_loge "invalid or missing firmware file: '$fw_path'"
-		return 1
-	}
-
-	mcu_logi "uploading '$fw_name' to slot: '$slot'..."
-
-	# Upload fw to selected slot (TODO: slots numbering Zephyr vs. MCUboot)
-	[ "$slot" = "1" ] && slot="2"
-	umcumgr -q -n "$slot" -d "$uart" -b "$baud$flow" upload "$fw_path" || {
-		mcu_loge "request 'upload' failed"
-		return 1
-	}
-
-	mcu_logi "firmware uploaded!"
-}
-
-mcu_enable_pin_set() {
-	local gpio="$1"
-	local gpio_value="$2"
-
-	mcu_logd "setting MCU enable_pin '$(basename "$gpio")' to '$gpio_value'"
-	echo "$gpio_value" > "${gpio}/value" 2>/dev/null
-}
-
-mcu_sn_check_and_update() {
-	local sn="$1"
-	local uart="$2"
-	local baud="$3"
-	local flow="$4"
-
-	local sn_dev
-
-	if [ "$flow" = "1" ]; then
-		flow=" -f"
-	else
-		flow=""
-	fi
-
-	[ -n "$baud" ] || baud="115200"
-
-	sn_dev="$(mcu_get_sn "$uart" "$baud" "$flow")"
-	[ -n "$sn_dev" ] || return 1
-
-	[ -n "$sn_dev" ] && {
-		if [ -z "$sn" ]; then
-			[ -d /etc/config-shadow ] && {
-				uci -c /etc/config-shadow -q set mcu.${SECT}.sn="$sn_dev"
-				uci -c /etc/config-shadow -q commit mcu
-			}
-
-			uci -q set mcu.${SECT}.sn="$sn_dev"
-			uci -q commit mcu
-		else
-			[ "$sn" != "$sn_dev" ] && {
-				mcu_loge "MCU S/N mismatch ('$sn_dev' != '$sn')!"
-				return 1
-			}
-		fi
-	}
-
-	return 0
-}
-
-mcu_fw_check_and_update() {
-	local uart="$1"
-	local baud="$2"
-	local flow="$3"
-
-	local active_slot
-	local fw_slots
-	local slot0_fw
-	local slot1_fw
-	local firmware
-	local board
-
-	config_get firmware "$SECT" firmware
-	[ -n "$firmware" ] || mcu_logw "option 'firmware' unset"
-
-	# MCU board name
-	board="$(mcu_get_board "$uart" "$baud" "$flow")"
-	[ $? -eq 0 ] || return 1
-
-	# Number of firmware slots and active slot
-	fw_slots="$(mcu_get_slotsnum "$uart" "$baud" "$flow")"
-	[ $? -eq 0 ] || return 1
-	[ -n "$fw_slots" ] || fw_slots="1"
-
-	[ "$fw_slots" = "2" ] && {
-		active_slot="$(mcu_get_activeslot "$uart" "$baud" "$flow")"
-		[ $? -eq 0 ] || return 1
-	}
-	[ -n "$active_slot" ] || active_slot="0"
-
-	# Firmware available?
-	[ -n "$firmware" ] && {
-		if [ "$fw_slots" = "2" ]; then
-			[ -f "${MCU_FW_DIR}/${board}/${firmware}/slot0.bin" -a \
-			  -f "${MCU_FW_DIR}/${board}/${firmware}/slot1.bin" ] || {
-				mcu_loge "firmware '$firmware' doesn't exist"
-				return 1
-			}
-		else
-			[ -f "${MCU_FW_DIR}/${board}/${firmware}/slot0.bin" ] || {
-				mcu_loge "firmware '$firmware' doesn't exist"
-				return 1
-			}
-		fi
-	}
-
-	slot0_fw="$(mcu_get_fwname "0" "$uart" "$baud" "$flow")"
-	[ $? -eq 0 ] || return 1
-
-	[ "$fw_slots" = "2" ] && {
-		slot1_fw="$(mcu_get_fwname "1" "$uart" "$baud" "$flow")"
-		[ $? -eq 0 ] || return 1
-	}
-
-	# No target firmware provided, check what's on device and update config
-	[ -n "$firmware" ] || {
-		firmware="$slot0_fw"
-		[ "$active_slot" = "1" ] && firmware="$slot1_fw"
-
-		[ -n "$firmware" ] && {
-			[ -d /etc/config-shadow ] && {
-				uci -c /etc/config-shadow -q set mcu.${SECT}.firmware="$firmware"
-				uci -c /etc/config-shadow -q commit mcu
-			}
-
-			uci -q set mcu.${SECT}.firmware="$firmware"
-			uci -q commit mcu
-
-			mcu_req_boot "$uart" "$baud" "$flow"
-			[ $? -ne 0 ] && return 1
-		}
-
-		return 0
-	}
-
-	# Do we have target firmware installed in the first slot?
-	[ "$firmware" = "$slot0_fw" ] && {
-		mcu_logd "found matching firmware installed in slot '0'"
-
-		if [ "$fw_slots" = "2" -a "$active_slot" != "0" ]; then
-			mcu_sel_slot "0" "$uart" "$baud" "$flow"
-			[ $? -ne 0 ] && return 1
-
-			# Changing active slots requires MCU reset at the moment
-			mcu_req_reset "$uart" "$baud" "$flow"
-			[ $? -ne 0 ] && return 1
-		else
-			mcu_req_boot "$uart" "$baud" "$flow"
-			[ $? -ne 0 ] && return 1
-		fi
-
-		return 0
-	}
-
-	# Upload and boot firmware on single-slot device
-	[ "$fw_slots" = "1" ] && {
-		mcu_fw_upload "$board" "0" "$firmware" "$uart" "$baud" "$flow"
-		[ $? -ne 0 ] && return 1
-
-		mcu_req_boot "$uart" "$baud" "$flow"
-		[ $? -ne 0 ] && return 1
-
-		return 0
-	}
-
-	# Do we have target firmware installed in the second slot?
-	[ "$firmware" = "$slot1_fw" ] && {
-		mcu_logd "found matching firmware installed in slot '1'"
-
-		if [ "$active_slot" != "1" ]; then
-			mcu_sel_slot "1" "$uart" "$baud" "$flow"
-			[ $? -ne 0 ] && return 1
-
-			# Changing active slots requires MCU reset at the moment
-			mcu_req_reset "$uart" "$baud" "$flow"
-			[ $? -ne 0 ] && return 1
-		else
-			mcu_req_boot "$uart" "$baud" "$flow"
-			[ $? -ne 0 ] && return 1
-		fi
-
-		return 0
-	}
-
-	# Upload and boot firmware on multi-slot device
-	# Always use inactive slot
-	if [ "$active_slot" = "0" ]; then
-		active_slot="1"
-	else
-		active_slot="0"
-	fi
-
-	mcu_fw_upload "$board" "$active_slot" "$firmware" "$uart" "$baud" "$flow"
-	[ $? -ne 0 ] && return 1
-
-	mcu_sel_slot "$active_slot" "$uart" "$baud" "$flow"
-	[ $? -ne 0 ] && return 1
-
-	# Changing active slots requires MCU reset at the moment
-	mcu_req_reset "$uart" "$baud" "$flow"
-	[ $? -ne 0 ] && return 1
-
-	return 0
-}
-
-mcu_add_uci_config() {
-	local name="$1"
-	local interface="$2"
-	local bootloader="$3"
-	local firmware="$4"
-	local enable_pin="$5"
-	local uart_path="$6"
-	local uart_baud="$7"
-	local uart_flow="$8"
-
-	uci -q set mcu.${name}="mcu"
-	uci -q set mcu.${name}.interface="$interface"
-	uci -q set mcu.${name}.bootloader="$bootloader"
-	uci -q set mcu.${name}.firmware="$firmware"
-
-	[ -n "$enable_pin" ] && uci -q set mcu.${name}.enable_pin="$enable_pin"
-	[ -n "$uart_path" ] && uci -q set mcu.${name}.uart_path="$uart_path"
-	[ -n "$uart_baud" ] && uci -q set mcu.${name}.uart_baud="$uart_baud"
-
-	[ "$uart_flow" = "1" ] && uci -q set mcu.${name}.uart_flow="1"
-
-	uci -q set mcu.${name}.disabled="0"
-
-	uci -q commit mcu
-}

feeds/mcu/mcu/files/uci-defaults/ipq807x

@@ -1,23 +0,0 @@
-[ -e /etc/config/mcu ] && exit 0
-
-touch /etc/config/mcu
-
-. /lib/functions.sh
-. /lib/functions/mcu.sh
-
-board=$(board_name)
-
-case "$board" in
-cig,wf196)
-	mcu_add_uci_config "nrf52833_uart" "uart" "mcuboot" \
-			   "zephyr-v3.3.x__hci_uart" \
-			   "mcu-enable" "/dev/ttyMSM1" "115200"
-	;;
-edgecore,eap102)
-	mcu_add_uci_config "nrf52840_usb" "usb" "mcuboot" \
-			   "zephyr-v3.3.x__hci_usb" \
-			   "mcu-enable"
-	;;
-esac
-
-exit 0

feeds/mcu/umcumgr/Makefile

@@ -1,43 +0,0 @@
-#
-# Copyright (C) 2023 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=umcumgr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://gitlab.com/pepe2k/umcumgr
-PKG_SOURCE_DATE:=2023-03-06
-PKG_SOURCE_VERSION:=966606a2868b8e6b0a2c7e129dc45a30e0d9ef87
-
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Piotr Dymacz <pepe2k@gmail.com>
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-CMAKE_INSTALL:=1
-
-define Package/umcumgr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libubox
-  TITLE:=User space tool for MCUmgr SMP based management
-endef
-
-define Package/umcumgr/description
-  Simple user space tool for MCU management over MCUmgr SMP
-  (Simple Management Protocol) protocol
-endef
-
-define Package/umcumgr/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/umcumgr $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,umcumgr))

feeds/openflow/openvswitch/Config.in

@@ -0,0 +1,8 @@
+menu "Configuration"
+	depends on PACKAGE_openvswitch
+
+	config	OPENVSWITCH_WITH_LIBUNBOUND
+		bool
+		default y
+		prompt "Build with libunbound library."
+endmenu

feeds/openflow/openvswitch/Makefile

@@ -0,0 +1,282 @@
+#
+# Copyright (C) 2013 Julius Schulz-Zander <julius@net.t-labs.tu-berlin.de>
+# Copyright (C) 2014-2017 OpenWrt.org
+# Copyright (C) 2018-2020 Yousong Zhou <yszhou4tech@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+include ./openvswitch.mk
+
+# Checklist on version bump
+#
+#  - Check acinclude.m4 for range of supported kernel versions: "but version newer than .* is not supported"
+#  - Check and update kmod dependencies when necessary (runtime module load check in the least)
+#
+PKG_NAME:=openvswitch
+PKG_VERSION:=$(ovs_version)
+PKG_RELEASE:=10
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://www.openvswitch.org/releases/
+PKG_HASH:=5c7baed537364d43af36c15dde298c95d35cb2cb3204b4d3fe9b0fc73c97f16d
+
+PKG_LICENSE:=Apache-2.0
+PKG_LICENSE_FILES:=LICENSE
+PKG_CPE_ID:=cpe:/a:openvswitch:openvswitch
+
+PKG_BUILD_DIR:=$(ovs_builddir)
+PKG_BUILD_DEPENDS+=python3/host python-six/host
+PKG_USE_MIPS16:=0
+PKG_BUILD_PARALLEL:=1
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+PYTHON3_PKG_BUILD:=0
+
+PKG_MAINTAINER:=Yousong Zhou <yszhou4tech@gmail.com>
+
+include $(INCLUDE_DIR)/package.mk
+include $(TOPDIR)/feeds/packages/lang/python/python3-host.mk
+include $(TOPDIR)/feeds/packages/lang/python/python3-package.mk
+
+define Package/openvswitch/config
+source "$(SOURCE)/Config.in"
+endef
+
+ovs_kmod_packages:=
+ovs_kmod_intree_kernel_patchver_min:=3.10
+ovs_kmod_intree_kernel_patchver_max:=5.5
+ovs_kmod_intree_not_supported:=$(strip $(call kernel_patchver_lt,$(ovs_kmod_intree_kernel_patchver_min))$(call kernel_patchver_gt,$(ovs_kmod_intree_kernel_patchver_max)))
+ovs_kmod_intree_dir:=$(PKG_BUILD_DIR)/datapath/linux
+ovs_kmod_upstream_dir:=$(LINUX_DIR)/net/openvswitch
+ovs_kmod_package_name=$(if $(filter openvswitch,$(1)),openvswitch,$(1))
+ovs_kmod_is_intree=$(filter %-intree,$(1))
+ovs_kmod_upstream_name=kmod-$(call ovs_kmod_package_name,$(patsubst %-intree,%,$(1)))
+ovs_kmod_package_provides=$(call ovs_kmod_upstream_name,$(1))
+define OvsKmodPackageTemplate
+ifeq ($(if $(call ovs_kmod_is_intree,$(1)),$(ovs_kmod_intree_not_supported)),)
+  define KernelPackage/$(call ovs_kmod_package_name,$(1))
+     SECTION:=kernel
+     CATEGORY:=Kernel modules
+     SUBMENU:=Network Support
+     TITLE:=$(ovs_kmod_$(1)_title)
+     DEPENDS:=$(ovs_kmod_$(1)_depends) $(if $(call ovs_kmod_is_intree,$(1)),@IPV6 @DEVEL)
+     PROVIDES:=$(call ovs_kmod_package_provides,$(1))
+     KCONFIG:=$(ovs_kmod_$(1)_kconfig)
+     FILES:=$(ovs_kmod_$(1)_files)
+     AUTOLOAD:=$(call AutoProbe,$(foreach m,$(ovs_kmod_$(1)_files),$(notdir $(patsubst %.ko,%,$(basename $(m))))))
+  endef
+
+  ovs_kmod_packages+=$(call ovs_kmod_package_name,$(1))
+endif
+endef
+
+ovs_kmod_openvswitch_title:=Open vSwitch kernel datapath (upstream)
+ovs_kmod_openvswitch_kconfig:=CONFIG_OPENVSWITCH
+ovs_kmod_openvswitch_depends:=\
+	  +kmod-lib-crc32c \
+	  +kmod-nf-nat \
+	  +IPV6:kmod-nf-nat6 \
+	  +kmod-nf-conntrack \
+	  +IPV6:kmod-nf-conntrack6 \
+	  +kmod-nsh \
+	  +kmod-ipt-conntrack-extra \
+
+ovs_kmod_openvswitch_files:=$(ovs_kmod_upstream_dir)/openvswitch.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch))
+
+ovs_kmod_openvswitch-gre_title:=Open vSwitch GRE tunneling support (upstream)
+ovs_kmod_openvswitch-gre_kconfig:= CONFIG_OPENVSWITCH_GRE
+ovs_kmod_openvswitch-gre_depends:= +kmod-openvswitch +kmod-gre
+ovs_kmod_openvswitch-gre_files:= $(ovs_kmod_upstream_dir)/vport-gre.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch-gre))
+
+ovs_kmod_openvswitch-vxlan_title:=Open vSwitch VXLAN tunneling support (upstream)
+ovs_kmod_openvswitch-vxlan_kconfig:= CONFIG_OPENVSWITCH_VXLAN
+ovs_kmod_openvswitch-vxlan_depends:= +kmod-openvswitch +kmod-vxlan
+ovs_kmod_openvswitch-vxlan_files:= $(ovs_kmod_upstream_dir)/vport-vxlan.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch-vxlan))
+
+ovs_kmod_openvswitch-geneve_title:=Open vSwitch Geneve tunneling support (upstream)
+ovs_kmod_openvswitch-geneve_kconfig:= CONFIG_OPENVSWITCH_GENEVE
+ovs_kmod_openvswitch-geneve_depends:= +kmod-openvswitch +kmod-geneve
+ovs_kmod_openvswitch-geneve_files:= $(ovs_kmod_upstream_dir)/vport-geneve.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch-geneve))
+
+# NOTE depends
+#
+#  - kmod-ipt-conntrack-extra: required for nf_conncount.ko
+#
+ovs_kmod_openvswitch-intree_title:=Open vSwitch kernel datapath (in tree)
+ovs_kmod_openvswitch-intree_depends:=\
+	  +kmod-lib-crc32c \
+	  +kmod-nf-nat \
+	  +IPV6:kmod-nf-nat6 \
+	  +kmod-nf-conntrack \
+	  +kmod-udptunnel4 \
+	  +kmod-ipt-conntrack-extra \
+
+ovs_kmod_openvswitch-intree_files:= $(ovs_kmod_intree_dir)/openvswitch.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch-intree))
+
+ovs_kmod_openvswitch-gre-intree_title:=Open vSwitch GRE tunneling support (in tree)
+ovs_kmod_openvswitch-gre-intree_depends:= +kmod-openvswitch-intree +kmod-gre
+ovs_kmod_openvswitch-gre-intree_files:= $(ovs_kmod_intree_dir)/vport-gre.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch-gre-intree))
+
+ovs_kmod_openvswitch-vxlan-intree_title:=Open vSwitch VXLAN tunneling support (in tree)
+ovs_kmod_openvswitch-vxlan-intree_depends:= +kmod-openvswitch-intree +kmod-vxlan
+ovs_kmod_openvswitch-vxlan-intree_files:= $(ovs_kmod_intree_dir)/vport-vxlan.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch-vxlan-intree))
+
+ovs_kmod_openvswitch-geneve-intree_title:=Open vSwitch Geneve tunneling support (in tree)
+ovs_kmod_openvswitch-geneve-intree_depends:= +kmod-openvswitch-intree +kmod-geneve
+ovs_kmod_openvswitch-geneve-intree_files:= $(ovs_kmod_intree_dir)/vport-geneve.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch-geneve-intree))
+
+ovs_kmod_openvswitch-stt-intree_title:=Open vSwitch STT tunneling support (in tree)
+ovs_kmod_openvswitch-stt-intree_depends:= +kmod-openvswitch-intree
+ovs_kmod_openvswitch-stt-intree_files:= $(ovs_kmod_intree_dir)/vport-stt.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch-stt-intree))
+
+ovs_kmod_openvswitch-lisp-intree_title:=Open vSwitch LISP tunneling support (in tree)
+ovs_kmod_openvswitch-lisp-intree_depends:= +kmod-openvswitch-intree
+ovs_kmod_openvswitch-lisp-intree_files:= $(ovs_kmod_intree_dir)/vport-lisp.ko
+$(eval $(call OvsKmodPackageTemplate,openvswitch-lisp-intree))
+
+# Dependency review
+#
+#	for f in sbin/*;   do echo $f; readelf -d $f | grep -i shared; done
+#	for f in bin/*;    do echo $f; readelf -d $f | grep -i shared; done
+#	for f in lib/*.so; do echo $f; readelf -d $f | grep -i shared; done
+#
+ovs_libopenvswitch_title:=Open vSwitch (libopenvswitch.so)
+ovs_libopenvswitch_hidden:=1
+ovs_libopenvswitch_depends:=+libopenssl +!(arc||arceb):libunwind
+ovs_libopenvswitch_depends+=+libatomic
+ifeq ($(CONFIG_OPENVSWITCH_WITH_LIBUNBOUND),y)
+ovs_libopenvswitch_depends+=+libunbound
+endif
+ovs_libopenvswitch_files:=usr/lib/libopenvswitch*.so*
+$(eval $(call OvsPackageTemplate,libopenvswitch))
+
+
+ovs_libofproto_title:=Open vSwitch (libofproto.so libsflow.so)
+ovs_libofproto_hidden:=1
+ovs_libofproto_depends+=+libatomic
+ovs_libofproto_files:=usr/lib/libofproto*.so* usr/lib/libsflow*.so*
+$(eval $(call OvsPackageTemplate,libofproto))
+
+
+ovs_libovsdb_title:=Open vSwitch (libovsdb.so)
+ovs_libovsdb_hidden:=1
+ovs_libovsdb_depends+=+libatomic
+ovs_libovsdb_files:=usr/lib/libovsdb*.so*
+$(eval $(call OvsPackageTemplate,libovsdb))
+
+
+ovs_vswitchd_title:=Open vSwitch (ovs-vswitchd)
+ovs_vswitchd_hidden:=1
+ovs_vswitchd_depends:=+openvswitch-libopenvswitch +openvswitch-libofproto
+ovs_vswitchd_depends+=+libatomic
+ovs_vswitchd_files:=usr/sbin/ovs-vswitchd
+$(eval $(call OvsPackageTemplate,vswitchd))
+
+
+ovs_ovsdb_title:=Open vSwitch (ovsdb-server)
+ovs_ovsdb_hidden:=1
+ovs_ovsdb_depends:=+openvswitch-libopenvswitch +openvswitch-libovsdb
+ovs_ovsdb_depends+=+libatomic
+ovs_ovsdb_files:=usr/sbin/ovsdb-server
+$(eval $(call OvsPackageTemplate,ovsdb))
+
+
+ovs_common_title:=Open vSwitch (common files)
+ovs_common_hidden:=1
+ovs_common_depends:=+openvswitch-libopenvswitch +openvswitch-libofproto +openvswitch-libovsdb
+ovs_common_depends+=+libatomic
+ovs_common_files:= \
+	usr/share/openvswitch/scripts/ovs-lib \
+	usr/share/openvswitch/scripts/ovs-ctl \
+	usr/share/openvswitch/scripts/ovs-kmod-ctl \
+	usr/share/openvswitch/scripts/ovs-save \
+	$(foreach b,ovs-appctl ovs-dpctl ovs-ofctl ovs-vsctl ovsdb-client ovsdb-tool,usr/bin/$(b))
+define ovs_common_install
+	$$(INSTALL_DIR) $$(1)/etc/openvswitch
+	$$(INSTALL_DIR) $$(1)/etc/init.d
+	$$(INSTALL_BIN) ./files/openvswitch.init $$(1)/etc/init.d/openvswitch
+	$$(INSTALL_DIR) $$(1)/etc/config
+	$$(INSTALL_DATA) ./files/openvswitch.config $$(1)/etc/config/openvswitch
+	$$(INSTALL_DIR) $$(1)/usr/share/openvswitch/scripts
+	$$(INSTALL_BIN) ./files/ovs-ctl-wrapper $$(1)/usr/share/openvswitch/scripts/
+	$$(LN) /usr/share/openvswitch/scripts/ovs-ctl-wrapper $$(1)/usr/bin/ovs-ctl
+	$$(LN) /usr/share/openvswitch/scripts/ovs-ctl-wrapper $$(1)/usr/bin/ovs-kmod-ctl
+endef
+define Package/openvswitch-common/conffiles
+/etc/config/openvswitch
+/etc/openvswitch
+endef
+$(eval $(call OvsPackageTemplate,common))
+
+
+# coreutils-sleep is required by ovs-lib for sleeping a fraction of second
+#
+# uuidgen is required for generating system-id
+ovs_openvswitch_title:=Open vSwitch
+ovs_openvswitch_hidden:=
+ovs_openvswitch_depends:=+coreutils +coreutils-sleep +uuidgen \
+	+openvswitch-common +openvswitch-vswitchd +openvswitch-ovsdb +kmod-openvswitch
+ovs_openvswitch_depends+=+libatomic
+ovs_openvswitch_files:= usr/share/openvswitch/vswitch.ovsschema
+$(eval $(call OvsPackageTemplate,openvswitch))
+
+
+ovs_python3_title:=Open vSwitch (Python3 library)
+ovs_python3_hidden:=
+ovs_python3_depends:=+PACKAGE_openvswitch-python3:python3 +PACKAGE_openvswitch-python3:python3-six
+define ovs_python3_install
+	$$(INSTALL_DIR) $$(1)$$(PYTHON3_PKG_DIR)
+	$$(CP) $$(PKG_INSTALL_DIR)/usr/share/openvswitch/python/ovs $$(1)$$(PYTHON3_PKG_DIR)
+endef
+$(eval $(call OvsPackageTemplate,python3))
+
+
+CONFIGURE_ARGS+= \
+	--enable-ndebug \
+	--enable-shared \
+	--disable-libcapng \
+	--disable-silent-rules \
+
+CONFIGURE_VARS += \
+	$(if $(CONFIG_OPENVSWITCH_WITH_LIBUNBOUND),,ac_cv_lib_unbound_ub_ctx_create=no) \
+	ovs_cv_flake8=no \
+	ovs_cv_python3=$(PYTHON3) \
+	ovs_cv_python3_host=$(HOST_PYTHON3_BIN) \
+	SPHINXBUILD=none \
+	KARCH=$(LINUX_KARCH) \
+
+ovs_intree_kmod_configs:=CONFIG_PACKAGE_kmod-openvswitch-intree
+ovs_intree_kmod_enabled:=$(strip $(foreach c,$(ovs_intree_kmod_configs),$($(c))))
+PKG_CONFIG_DEPENDS+=$(ovs_intree_kmod_configs)
+ifneq ($(ovs_intree_kmod_enabled),)
+  ifeq ($(ovs_kmod_intree_not_supported),)
+    CONFIGURE_ARGS += --with-linux=$(LINUX_DIR)
+  else
+    $(warning XXX: openvswitch: intree kmods selected but not supported)
+  endif
+endif
+
+TARGET_CFLAGS += -flto -std=gnu99
+MAKE_VARS += PYTHONPATH="$(HOST_PYTHON3PATH)"
+
+export OVS_KERNEL_MAKE_FLAGS=$(KERNEL_MAKE_FLAGS)
+
+override CONFIG_AUTOREMOVE=
+
+$(foreach p,$(ovs_kmod_packages),\
+  $(eval $(call KernelPackage,$(p)))\
+)
+$(foreach p,$(ovs_packages),\
+  $(eval $(call BuildPackage,$(p)))\
+)

feeds/openflow/openvswitch/README.md

@@ -0,0 +1,106 @@
+# Which packages to install
+
+Install `openvswitch` if you need OpenFlow virtual switch function.  It
+contains ovs-vswitchd, ovsdb-server and helper utilities such as ovs-vsctl,
+ovs-ofctl, ovs-ctl etc.
+
+Linux kernel datapath module openvswitch.ko will also be installed along with
+package `openvswitch`.  Tunnel encap support for gre, geneve, vxlan can be
+included by installing `kmod-openvswitch-{gre,geneve,vxlan}` respectively
+
+For OVN deployment
+
+- Install `openvswitch-ovn-north` for ovs-northd, ovsdb-server, ovn helper utitlies
+- Install `openvswitch-ovn-host` for ovn-controller and `openvswitch`
+
+# How to use them
+
+Open vSwitch provides a few very useful helper script in
+`/usr/share/openvswitch/scripts/`.  A simple initscript is provided.  It's
+mainly a wrapper around `ovs-ctl` and `ovn-ctl` with simple knobs from
+`/etc/config/openvswitch`.  Procd is not used here.
+
+	/etc/init.d/openvswitch start
+	/etc/init.d/openvswitch stop
+	/etc/init.d/openvswitch stop north
+	/etc/init.d/openvswitch restart ovs
+	/etc/init.d/openvswitch status
+
+Use `ovs-ctl` and `ovn-ctl` directly for more functionalities
+
+# Open vSwitch in-tree Linux datapath modules
+
+The Open vSwitch build system uses regexp and conditional-compilation
+heuristics to support building the shipped kernel module source code against a
+wide range of kernels, as of openvswitch-2.10, the list is supposed to include
+vanilla linux 3.10 to 4.15, plus a few distro kernels.
+
+It may NOT work
+
+ - Sometimes the code does not compile
+ - Sometimes the code compiles but insmod will fail
+ - Sometimes modules are loaded okay but actually does not function right
+
+For these reasons, the in-tree datapath modules are NOT visible/enabled by
+default.
+
+Building and using in-tree datapath modules requires some level of devel
+abilities to proceed.  You are expected to configure build options and build
+the code on your own
+
+E.g. pair openvswitch userspace with in-tree datapath module
+
+	CONFIG_DEVEL=y
+	CONFIG_PACKAGE_openvswitch=y
+	# CONFIG_PACKAGE_kmod-openvswitch is not set
+	CONFIG_PACKAGE_kmod-openvswitch-intree=y
+
+E.g. replace in-tree datapath module with upstream version
+
+	opkg remove --force-depends kmod-openvswitch-intree
+	opkg install kmod-openvswitch
+	ovs-ctl force-reload-kmod
+
+# UCI configuration options
+
+There are 5 config section types in package openvswitch:
+ovs ovn_northd, ovn_controller & ovs_bridge.
+
+Each of these supports a disabled option, which should be 
+set to 0 to launch the respective daemons.
+
+The ovs section section also supports the options below, to configure a set of
+SSL CA, certificate and private key. After adding these to Open vSwitch, you
+may specify ssl: connection methods for e.g. the OpenFlow controller. Note that
+Open vSwitch only reads these files during startup, so it needs to be restarted
+after adding or changing these options.
+
+| Name     | Type    | Required | Default | Description                       |
+|----------|---------|----------|---------|-----------------------------------|
+| disabled | boolean | no       | 0       | If set to 1, do not configure SSL |
+| ca       | string  | no       | (none)  | Path to CA certificate            |
+| cert     | string  | no       | (none)  | Path to certificate               |
+| key      | string  | no       | (none)  | Path to private key               |
+
+The ovs_bridge section also supports the options below,
+for initialising a virtual bridge with an OpenFlow controller.
+
+| Name          | Type    | Required | Default                        | Description                                                |
+|---------------|---------|----------|--------------------------------|------------------------------------------------------------|
+| disabled      | boolean | no       | 0                              | If set to true, disable initialisation of the named bridge |
+| name          | string  | no       | Inherits UCI config block name | The name of the switch in the OVS daemon                   |
+| controller    | string  | no       | (none)                         | The endpoint of an OpenFlow controller for this bridge     |
+| datapath_id   | string  | no       | (none)                         | The OpenFlow datapath ID for this bridge                   |
+| datapath_desc | string  | no       | (none)                         | The OpenFlow datapath description for this bridge          |
+| fail_mode     | string  | no       | standalone                     | The bridge failure mode                                    |
+
+The ovs_port section can be used to add ports to a bridge. It supports the options below.
+
+| Name     | Type    | Required | Default | Description
+| ---------|---------|----------|---------|------------------------------------------------|
+| disabled | boolean | no       | 0       | If set to 1, do not add the port to the bridge |
+| bridge   | string  | yes      | (none)  | Name of the bridge to add the port to          |
+| port     | string  | yes      | (none)  | Name of the port to add to the bridge          |
+| ofport   | integer | no       | (none)  | OpenFlow port number to be used by the port    |
+| tag      | integer | no       | (none)  | 802.1Q VLAN tag to set on the port             |
+| type     | string  | no       | (none)  | Port type, e.g. internal, erspan, type, ...    |

feeds/openflow/openvswitch/files/openvswitch.config

@@ -0,0 +1,27 @@
+config ovs ovs
+	option disabled 1
+	option ca '/etc/openvswitch/example_ca.crt'
+	option cert '/etc/openvswitch/example_cert.crt'
+	option key '/etc/openvswitch/example_key.crt'
+
+config ovn_northd north
+	option disabled 1
+
+config ovn_controller controller
+	option disabled 1
+
+config ovs_bridge
+	option disabled 1
+	option name 'my-bridge'
+	option controller 'tcp:192.168.0.1'
+	option datapath_desc ''
+	option datapath_id ''
+	option fail_mode 'standalone'
+
+config ovs_port
+	option disabled 1
+	option bridge 'my-bridge'
+	option port 'ovs-port1'
+	option ofport '1'
+	option tag '123'
+	option type 'internal'

feeds/openflow/openvswitch/files/openvswitch.init

@@ -0,0 +1,281 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2013 Julius Schulz-Zander <julius@net.t-labs.tu-berlin.de>
+# Copyright (C) 2014-2017 OpenWrt.org
+# Copyright (C) 2018 Yousong Zhou <yszhou4tech@gmail.com>
+# Copyright (C) 2021 Felix Fietkau <nbd@nbd.name>
+
+. /lib/functions/procd.sh
+START=15
+
+basescript=$(readlink "$initscript")
+
+ovs_ctl="/usr/share/openvswitch/scripts/ovs-ctl"; [ -x "$ovs_ctl" ] || ovs_ctl=:
+ovn_ctl="/usr/share/ovn/scripts/ovn-ctl"; [ -x "$ovn_ctl" ] || ovn_ctl=:
+
+extra_command "status" "Get status information"
+
+service_triggers() {
+	procd_add_reload_trigger openvswitch
+}
+
+init_triggers() {
+	procd_open_service "$(basename ${basescript:-$initscript})" "$initscript"
+	procd_close_service set
+}
+
+start() {
+	init_triggers
+	ovs_action start "$@"
+}
+
+reload() {
+	start
+}
+
+running() {
+	return 0
+}
+
+stop() {
+	procd_kill "$(basename ${basescript:-$initscript})"
+	ovs_action stop "$@"
+}
+
+restart() {
+	init_triggers
+	ovs_action restart "$@"
+}
+
+status() {
+	ovs_action status "$@"
+}
+
+ovs_action_cfgs=
+ovs_action() {
+	local action="$1"; shift
+	local cfgtype
+
+	ovs_action_cfgs="$*"
+	config_load openvswitch
+	for cfgtype in ovs ovn_northd ovn_controller; do
+		config_foreach "ovs_xx" "$cfgtype" "$action" "$cfgtype"
+	done
+
+	case "$action" in
+		restart|start)
+			config_foreach ovs_bridge_init "ovs_bridge"
+			;;
+	esac
+
+}
+
+ovs_xx() {
+	local cfg="$1"
+	local action="$2"
+	local cfgtype="$3"
+	local disabled
+
+	if [ -n "$ovs_action_cfgs" ] && ! list_contains "ovs_action_cfgs" "$cfg"; then
+		return
+	fi
+	case "$action" in
+		status|stop) ;;
+		*)
+			config_get_bool disabled "$cfg" disabled 0
+			[ "$disabled" == "0" ] || return
+			;;
+	esac
+
+	case "$cfgtype" in
+		ovs)
+			"$ovs_ctl" "$action" \
+				--system-id=random 1000>&-
+			ovs_set_ssl
+			;;
+		ovn_*)
+			"$ovn_ctl" "${action}_${cfgtype#ovn_}"
+			;;
+	esac
+}
+
+ovs_bridge_parse_port() {
+	case "$1" in
+		*:*)
+			port="${1%%:*}"
+			type="${1#*:}"
+		;;
+		*)
+			port="$1"
+			type=""
+		;;
+	esac
+}
+
+ovs_bridge_port_add() {
+	[ -n "$1" ] || return
+
+	ovs_bridge_parse_port "$1"
+	cur_type="$(ovs-vsctl get interface "$port" type 2>/dev/null)"
+	[ "$?" = 0 ] && {
+		[ "$type" = "$cur_type" ] || ovs-vsctl del-port "$port"
+	}
+
+	ovs-vsctl --may-exist add-port "$name" "$port" ${type:+ -- set interface "$port" type="$type"}
+	ovs_bridge_port_up "$port"
+	__port_list="$__port_list ${port} "
+}
+
+ovs_bridge_port_add_complex() {
+	local cfg="$1"
+	local cur_bridge="$2"
+
+	local bridge disabled ofport port tag type
+	local cur_tag cur_type del_port
+
+	config_get_bool disabled "$cfg" disabled 0
+	[ "$disabled" = "0" ] || return
+
+	config_get bridge "$cfg" bridge
+	[ "$bridge" = "$cur_bridge" ] || return
+	ovs-vsctl br-exists "$bridge" || return
+
+	config_get port "$cfg" port
+	[ -n "$port" ] || return
+
+	config_get ofport "$cfg" ofport
+
+	config_get tag "$cfg" tag
+	if [ -n "$tag" ]; then
+		if cur_tag="$(ovs-vsctl get port "$port" tag 2>/dev/null)"; then
+			[ "$tag" = "$cur_tag" ] || del_port=1
+		fi
+	fi
+
+	config_get type "$cfg" type
+	if [ -n "$type" ]; then
+		if cur_type="$(ovs-vsctl get interface "$port" type 2>/dev/null)"; then
+			[ "$type" = "$cur_type" ] || del_port=1
+		fi
+	fi
+
+	[ "${del_port:-0}" -eq 1 ] && ovs-vsctl --if-exists del-port "$bridge" "$port"
+
+	ovs-vsctl --may-exist add-port "$bridge" "$port" ${tag:+tag="$tag"} \
+		${ofport:+ -- set interface "$port" ofport_request="$ofport"} \
+		${type:+ -- set interface "$port" type="$type"}
+	ovs_bridge_port_up "$port"
+	__port_list="$__port_list ${port} "
+}
+
+ovs_bridge_port_cleanup() {
+	for port in `ovs-vsctl list-ports "$name"`; do
+		case "$__port_list" in
+			*" $port "*);;
+			*) ovs-vsctl del-port "$port";;
+		esac
+	done
+}
+
+ovs_bridge_port_up() {
+	local port="$1"
+
+	ip link set dev "$port" up
+}
+
+ovs_bridge_validate_datapath_id() {
+	local dpid="$1"
+
+	if expr "$dpid" : '[[:xdigit:]]\{16\}$' > /dev/null; then
+		return 0
+	elif expr "$dpid" : '0x[[:xdigit:]]\{1,16\}$' > /dev/null; then
+		return 0
+	else
+		logger -t openvswitch "invalid datapath_id: $dpid"
+		return 1
+	fi
+}
+
+ovs_bridge_validate_datapath_desc() {
+	local dpdesc="$1"
+
+	if [ "$(echo $dpdesc | wc -c)" -le 255 ]; then
+		return 0
+	else
+		logger -t openvswitch "invalid datapath_desc: $dpdesc"
+		return 1
+	fi
+}
+
+ovs_bridge_validate_fail_mode() {
+	local fail_mode="$1"
+
+	case "$fail_mode" in
+		secure|standalone)
+			return 0
+			;;
+		*)
+			logger -t openvswitch "invalid fail_mode: $fail_mode"
+			return 1
+			;;
+	esac
+}
+
+ovs_bridge_init() {
+	local cfg="$1"
+
+	local disabled
+	local name
+	local controller
+	local datapath_id
+
+	config_get_bool disabled "$cfg" disabled 0
+	[ "$disabled" == "0" ] || return
+
+	config_get name "$cfg" name $cfg
+	ovs-vsctl --may-exist add-br "$name"
+
+	config_get datapath_id "$cfg" datapath_id
+	[ -n "$datapath_id" ] && {
+		ovs_bridge_validate_datapath_id "$datapath_id" && {
+			ovs-vsctl --if-exists set bridge "$name" other-config:datapath-id="$datapath_id"
+		}
+	}
+
+	config_get datapath_desc "$cfg" datapath_desc
+	[ -n "$datapath_desc" ] && {
+		ovs_bridge_validate_datapath_desc "$datapath_desc" && {
+			ovs-vsctl --if-exists set bridge "$name" other-config:dp-desc="$datapath_desc"
+		}
+	}
+
+	config_get fail_mode "$cfg" fail_mode
+	[ -n "$fail_mode" ] && {
+		ovs_bridge_validate_fail_mode "$fail_mode" && {
+			ovs-vsctl set-fail-mode "$name" "$fail_mode" 2> /dev/null
+		} || {
+			ovs-vsctl del-fail-mode "$name" 2> /dev/null
+		}
+	} || {
+		ovs-vsctl del-fail-mode "$name" 2> /dev/null
+	}
+
+	config_list_foreach "$cfg" "ports" ovs_bridge_port_add
+	config_foreach ovs_bridge_port_add_complex ovs_port "$name"
+	config_get_bool drop "$cfg" "drop_unknown_ports" 0
+	[ "$drop" == 1 ] && ovs_bridge_port_cleanup
+
+	config_get controller "$cfg" controller
+	[ -n "$controller" ] && \
+		ovs-vsctl set-controller "$name" "$controller"
+}
+
+ovs_set_ssl() {
+	local ca="$(uci -q get openvswitch.ovs.ca)"
+	[ -f "$ca" ] || return
+	local cert="$(uci get openvswitch.ovs.cert)"
+	[ -f "$cert" ] || return
+	local key="$(uci get openvswitch.ovs.key)"
+	[ -f "$key" ] || return
+
+	ovs-vsctl set-ssl "$key" "$cert" "$ca"
+}