Merge pull request #540 from Telecominfraproject/staging-fix-nns-feed

ipq807x: fix qca-nss-clients feed

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -190,6 +190,7 @@ ath11k-macs)
 		;;
 	yuncore,ax840|\
 	edgecore,eap102|\
+	edgecore,eap104|\
 	edgecore,eap106|\
 	indio,um-310ax-v1|\
 	indio,um-510axp-v1|\

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/net/macs

@@ -1,3 +1,3 @@
 #!/bin/sh
-mac=$(cat /etc/board.json | jsonfilter -e '@["network-device"]["'$DEVICENAME'"]'.macaddr)
+mac=$(cat /etc/board.json | jsonfilter -e '@["network_device"]["'$DEVICENAME'"]'.macaddr)
 [ -n "$mac" ] && ip link set $DEVICENAME address $mac

feeds/ipq807x/qca-nss-clients/Makefile

@@ -5,7 +5,7 @@ PKG_NAME:=qca-nss-clients
 PKG_SOURCE_PROTO:=git
 PKG_BRANCH:=master
 PKG_RELEASE:=2
-PKG_SOURCE_URL:=https://source.codeaurora.org/quic/qsdk/oss/lklm/nss-clients/
+PKG_SOURCE_URL:=https://git.codelinaro.org/clo/qsdk/oss/lklm/nss-clients
 PKG_MIRROR_HASH:=802bf8b2dac8da0549e108b873afd982d127370c07d6574ece71f902eafe7698
 PKG_VERSION:=153998d70fdba508a59a28c13a606032cbf32686
 

feeds/mcu/mcu/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mcu
-PKG_VERSION:=2023-03-12
+PKG_VERSION:=2023-03-22
 PKG_RELEASE=1
 
 PKG_LICENSE:=GPL-2.0

feeds/mcu/mcu/files/mcu.hotplug

@@ -47,13 +47,19 @@ mcu_hotplug_setup() {
 	[ $? -ne 0 ] && return 1
 
 	mcu_fw_check_and_update "$uart"
-	[ $? -ne 0 ] && return 1
+	rc="$?"
 
+	[ "$rc" = "1" ] && return 1
+
+	[ "$rc" = "0" ] && {
 		fw_type="$(uci -q get "mcu.${SECT}.firmware" | awk -F '__' '{print $2}')"
 		[ -n "$fw_type" ] || return 0
 
 		[ -x "${MCU_HS_DIR}/${fw_type}.sh" ] && \
 			"${MCU_HS_DIR}/${fw_type}.sh" "$SECT"
+	}
+
+	return 0
 }
 
 # We are looking for ttyACM with specific product name and USB VID:PID

feeds/mcu/mcu/files/mcu.init

@@ -24,7 +24,16 @@ mcu_setup_uart() {
 	[ $? -ne 0 ] && return 1
 
 	mcu_fw_check_and_update "$uart" "$baud" "$flow"
+	rc="$?"
+
+	[ "$rc" = "1" ] && return 1
+
+	[ "$rc" = "2" ] && {
+		sleep 1
+
+		mcu_req "boot" "$uart" "$baud" "$flow"
 		[ $? -ne 0 ] && return 1
+	}
 
 	fw_type="$(uci -q get "mcu.${SECT}.firmware" | awk -F '__' '{print $2}')"
 	[ -n "$fw_type" ] || return 0
@@ -141,18 +150,20 @@ mcu_setup_usb() {
 	}
 
 	mcu_fw_check_and_update "$uart"
-	[ $? -ne 0 ] && {
+	rc="$?"
+
+	[ "$rc" = "1" ] && {
 		mcu_enable_pin_set "$gpio_path" "$gpio_off"
 
 		flock -u 9
 		return 1
 	}
 
+	[ "$rc" = "0" ] && {
 		fw_type="$(uci -q get "mcu.${SECT}.firmware" | awk -F '__' '{print $2}')"
-	[ -n "$fw_type" ] || return 0
+		[ -n "$fw_type" -a -x "${MCU_HS_DIR}/${fw_type}.sh" ] && \
-
-	[ -x "${MCU_HS_DIR}/${fw_type}.sh" ] && \
 			"${MCU_HS_DIR}/${fw_type}.sh" "$SECT"
+	}
 
 	flock -u 9
 }

feeds/mcu/mcu/files/mcu.sh

@@ -289,6 +289,10 @@ mcu_sn_check_and_update() {
 	return 0
 }
 
+# Returns:
+# 0 if MCU was requested to boot firmware
+# 1 on error
+# 2 if MCU was requested to reset
 mcu_fw_check_and_update() {
 	local uart="$1"
 	local baud="$2"
@@ -385,11 +389,13 @@ mcu_fw_check_and_update() {
 
 			mcu_req "boot" "$uart" "$baud" "$flow"
 			[ $? -ne 0 ] && return 1
-		}
 
 			return 0
 		}
 
+		return 1
+	}
+
 	# Do we have target firmware installed in the first slot?
 	[ "$firmware" = "$slot0_fw" -a "$slot0_sha" = "$fw0_sha" ] && {
 		mcu_logi "found matching firmware installed in slot '0'"
@@ -401,6 +407,8 @@ mcu_fw_check_and_update() {
 			# Changing active slots requires MCU reset at the moment
 			mcu_req "reset" "$uart" "$baud" "$flow"
 			[ $? -ne 0 ] && return 1
+
+			return 2
 		else
 			mcu_req "boot" "$uart" "$baud" "$flow"
 			[ $? -ne 0 ] && return 1
@@ -411,15 +419,15 @@ mcu_fw_check_and_update() {
 
 	mcu_logi "no matching firmware found in slot '0'"
 
-	# Upload and boot firmware on single-slot device
+	# Upload firmware and reset on single-slot device
 	[ "$fw_slots" = "1" ] && {
 		mcu_fw_upload "$board" "0" "$firmware" "$uart" "$baud" "$flow"
 		[ $? -ne 0 ] && return 1
 
-		mcu_req "boot" "$uart" "$baud" "$flow"
+		mcu_req "reset" "$uart" "$baud" "$flow"
 		[ $? -ne 0 ] && return 1
 
-		return 0
+		return 2
 	}
 
 	# Do we have target firmware installed in the second slot?
@@ -433,6 +441,8 @@ mcu_fw_check_and_update() {
 			# Changing active slots requires MCU reset at the moment
 			mcu_req "reset" "$uart" "$baud" "$flow"
 			[ $? -ne 0 ] && return 1
+
+			return 2
 		else
 			mcu_req "boot" "$uart" "$baud" "$flow"
 			[ $? -ne 0 ] && return 1
@@ -461,7 +471,7 @@ mcu_fw_check_and_update() {
 	mcu_req "reset" "$uart" "$baud" "$flow"
 	[ $? -ne 0 ] && return 1
 
-	return 0
+	return 2
 }
 
 mcu_add_uci_config() {

feeds/ucentral/ratelimit/files/etc/init.d/ratelimit

@@ -10,7 +10,7 @@ add_rate() {
 	config_get ssid "$cfg" ssid
 	config_get ingress "$cfg" ingress
 	config_get egress "$cfg" egress
-	ubus call ratelimit defaults_set '{"name": "'$ssid'", "rate_ingress": "'$ingress'mbit", "rate_egress": "'$egress'mbit" }'
+	ubus call ratelimit defaults_set "{\"name\": \"$ssid\", \"rate_ingress\": \""$ingress"mbit\", \"rate_egress\": \""$egress"mbit\" }"
 }
 
 reload_service() {