Merge pull request #620 from Telecominfraproject/v3.0.0-release

V3.0.1 release

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -133,7 +133,7 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan ""
 		;;
 	cybertan,eww631-b1)
-		ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6@eth0"
+		ucidef_add_switch "switch1" "5:wan" "4:lan" "3:lan" "2:lan" "6@eth0"
 		;;
 	wallys,dr5018)
                 ucidef_set_interface_lan "eth0 eth1"

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -134,6 +134,11 @@ $(call Package/ath11k-wifi-default)
     TITLE:=hfcl-ion4xi bdf
 endef
 
+define Package/ath11k-wifi-hfcl-ion4xe
+$(call Package/ath11k-wifi-default)
+    TITLE:=hfcl-ion4xe bdf
+endef
+
 define Package/ath11k-wifi-hfcl-ion4xi_w
 $(call Package/ath11k-wifi-default)
     TITLE:=hfcl-ion4xi_w bdf
@@ -315,6 +320,11 @@ define Package/ath11k-wifi-hfcl-ion4xi/install
 	$(INSTALL_DATA) ./board-hfcl-ion4xi.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board-2.bin
 endef
 
+define Package/ath11k-wifi-hfcl-ion4xe/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/
+	$(INSTALL_DATA) ./board-hfcl-ion4xe.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board-2.bin
+endef
+
 define Package/ath11k-wifi-hfcl-ion4xi_wp/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/
 	$(INSTALL_DATA) ./board-hfcl-ion4xi_wp.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board.bin
@@ -406,6 +416,7 @@ $(eval $(call BuildPackage,ath11k-wifi-motorola-q14))
 $(eval $(call BuildPackage,ath11k-wifi-optimcloud-d50))
 $(eval $(call BuildPackage,ath11k-wifi-optimcloud-d60))
 $(eval $(call BuildPackage,ath11k-wifi-hfcl-ion4xi))
+$(eval $(call BuildPackage,ath11k-wifi-hfcl-ion4xe))
 $(eval $(call BuildPackage,ath11k-wifi-hfcl-ion4xi_wp))
 $(eval $(call BuildPackage,ath11k-wifi-hfcl-ion4xi_w))
 $(eval $(call BuildPackage,ath11k-wifi-hfcl-ion4x_w))

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.c

@@ -1958,6 +1958,9 @@ void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequen
 	struct hostapd_data *hapd;
 	int i;
 
+	if (!ctx)
+		return;
+
 	blob_buf_init(&b, 0);
 	blobmsg_add_u16(&b, "frequency", frequency);
 	blobmsg_add_u16(&b, "width", chan_width);

feeds/ipq807x_v5.4/ipq50xx/Makefile

@@ -20,7 +20,7 @@ DEFAULT_PACKAGES += kmod-qca-nss-dp kmod-qca-ssdk swconfig \
 	kmod-usb-phy-ipq5018 kmod-usb-dwc3-qcom-internal \
 	kmod-ath11k-ahb  ath11k-firmware-ipq5018 \
 	kmod-gpio-button-hotplug iwinfo \
-	qca-ssdk-shell \
+	qca-ssdk-shell kmod-bootconfig \
 	uboot-envtools -procd-ujail
 
 $(eval $(call BuildTarget))

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-yuncore-fap655.dts

@@ -340,7 +340,7 @@
 			status = "ok";
 			pinctrl-0 = <&mdio1_pins>;
 			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
+			phy-reset-gpio = <&tlmm 16 0>;
 
 			ethernet-phy@0 {
 				reg = <0x00>;

feeds/ipq807x_v5.4/ipq50xx/modules.mk

@@ -51,3 +51,17 @@ define KernelPackage/tpm-tis-i2c/description
   within Linux.
 endef
 $(eval $(call KernelPackage,tpm-tis-i2c))
+
+define KernelPackage/bootconfig
+  SUBMENU:=Other modules
+  TITLE:=Bootconfig partition for failsafe
+  KCONFIG:=CONFIG_BOOTCONFIG_PARTITION
+  FILES:=$(LINUX_DIR)/drivers/platform/ipq/bootconfig.ko@ge4.4
+  AUTOLOAD:=$(call AutoLoad,56,bootconfig,1)
+endef
+
+define KernelPackage/bootconfig/description
+  Bootconfig partition for failsafe
+endef
+
+$(eval $(call KernelPackage,bootconfig))

feeds/ipq807x_v5.4/ipq50xx/patches/300-bootconfig.patch

@@ -0,0 +1,13 @@
+Index: linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d/drivers/platform/ipq/bootconfig.c
+===================================================================
+--- linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d.orig/drivers/platform/ipq/bootconfig.c
++++ linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d/drivers/platform/ipq/bootconfig.c
+@@ -366,7 +366,7 @@ static int __init bootconfig_partition_i
+ 			continue;
+ 
+ 		partname_dir[i] = proc_mkdir(part_info[i].name, boot_info_dir);
+-		if (partname_dir != NULL) {
++		if (partname_dir[i] != NULL) {
+ 			proc_create_data("primaryboot", S_IRUGO,
+ 					   partname_dir[i],
+ 					   &primaryboot_ops,

feeds/ipq807x_v5.4/ipq60xx/Makefile

@@ -20,7 +20,7 @@ DEFAULT_PACKAGES += kmod-qca-nss-dp kmod-qca-ssdk swconfig \
 	kmod-usb-phy-ipq807x kmod-usb-dwc3-qcom-internal \
 	kmod-ath11k-ahb  ath11k-firmware-ipq60xx \
 	kmod-gpio-button-hotplug iwinfo \
-	qca-ssdk-shell \
+	qca-ssdk-shell kmod-bootconfig \
 	uboot-envtools -procd-ujail
 
 $(eval $(call BuildTarget))

feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk

@@ -25,7 +25,7 @@ define Device/hfcl_ion4xe
   DEVICE_DTS := qcom-ipq6018-hfcl-ion4xe
   DEVICE_DTS_CONFIG := config@cp01-c1
   SUPPORTED_DEVICES := hfcl,ion4xe
-  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-envtools kmod-hwmon-lm75
+  DEVICE_PACKAGES := ath11k-wifi-hfcl-ion4xe uboot-envtools kmod-hwmon-lm75
 endef
 TARGET_DEVICES += hfcl_ion4xe
 

feeds/ipq807x_v5.4/ipq60xx/modules.mk

@@ -76,3 +76,17 @@ define KernelPackage/usb-dwc3-qcom-internal/description
 endef
 
 $(eval $(call KernelPackage,usb-dwc3-qcom-internal))
+
+define KernelPackage/bootconfig
+  SUBMENU:=Other modules
+  TITLE:=Bootconfig partition for failsafe
+  KCONFIG:=CONFIG_BOOTCONFIG_PARTITION
+  FILES:=$(LINUX_DIR)/drivers/platform/ipq/bootconfig.ko@ge4.4
+  AUTOLOAD:=$(call AutoLoad,56,bootconfig,1)
+endef
+
+define KernelPackage/bootconfig/description
+  Bootconfig partition for failsafe
+endef
+
+$(eval $(call KernelPackage,bootconfig))

feeds/ipq807x_v5.4/ipq60xx/patches/300-bootconfig.patch

@@ -0,0 +1,13 @@
+Index: linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d/drivers/platform/ipq/bootconfig.c
+===================================================================
+--- linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d.orig/drivers/platform/ipq/bootconfig.c
++++ linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d/drivers/platform/ipq/bootconfig.c
+@@ -366,7 +366,7 @@ static int __init bootconfig_partition_i
+ 			continue;
+ 
+ 		partname_dir[i] = proc_mkdir(part_info[i].name, boot_info_dir);
+-		if (partname_dir != NULL) {
++		if (partname_dir[i] != NULL) {
+ 			proc_create_data("primaryboot", S_IRUGO,
+ 					   partname_dir[i],
+ 					   &primaryboot_ops,

feeds/ipq807x_v5.4/ipq807x/Makefile

@@ -20,7 +20,7 @@ DEFAULT_PACKAGES += kmod-qca-nss-dp kmod-qca-ssdk swconfig \
 	kmod-usb-phy-ipq807x kmod-usb-dwc3-qcom-internal \
 	kmod-ath11k-ahb ath11k-firmware-ipq807x \
 	kmod-gpio-button-hotplug iwinfo \
-	qca-ssdk-shell \
+	qca-ssdk-shell kmod-bootconfig \
 	uboot-envtools -procd-ujail
 
 $(eval $(call BuildTarget))

feeds/ipq807x_v5.4/ipq807x/modules.mk

@@ -56,4 +56,16 @@ endef
 
 $(eval $(call KernelPackage,diag-char))
 
+define KernelPackage/bootconfig
+  SUBMENU:=Other modules
+  TITLE:=Bootconfig partition for failsafe
+  KCONFIG:=CONFIG_BOOTCONFIG_PARTITION
+  FILES:=$(LINUX_DIR)/drivers/platform/ipq/bootconfig.ko@ge4.4
+  AUTOLOAD:=$(call AutoLoad,56,bootconfig,1)
+endef
 
+define KernelPackage/bootconfig/description
+  Bootconfig partition for failsafe
+endef
+
+$(eval $(call KernelPackage,bootconfig))

feeds/ipq807x_v5.4/ipq807x/patches/300-bootconfig.patch

@@ -0,0 +1,13 @@
+Index: linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d/drivers/platform/ipq/bootconfig.c
+===================================================================
+--- linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d.orig/drivers/platform/ipq/bootconfig.c
++++ linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d/drivers/platform/ipq/bootconfig.c
+@@ -366,7 +366,7 @@ static int __init bootconfig_partition_i
+ 			continue;
+ 
+ 		partname_dir[i] = proc_mkdir(part_info[i].name, boot_info_dir);
+-		if (partname_dir != NULL) {
++		if (partname_dir[i] != NULL) {
+ 			proc_create_data("primaryboot", S_IRUGO,
+ 					   partname_dir[i],
+ 					   &primaryboot_ops,

feeds/ipq807x_v5.4/mac80211/patches/pending/310-fix_crash_on_invalid_band.patch

@@ -0,0 +1,11 @@
+--- a/net/mac80211/sta_info.c
++++ b/net/mac80211/sta_info.c
+@@ -2157,7 +2157,7 @@ static void sta_stats_decode_rate(struct
+ 
+ 		sband = local->hw.wiphy->bands[band];
+ 
+-		if (WARN_ON_ONCE(!sband->bitrates))
++		if (WARN_ON_ONCE(!sband || !sband->bitrates))
+ 			break;
+ 
+ 		brate = sband->bitrates[rate_idx].bitrate;

feeds/ipq95xx/hostapd/src/src/ap/ubus.c

@@ -1892,6 +1892,9 @@ void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequen
 	struct hostapd_data *hapd;
 	int i;
 
+	if (!ctx)
+		return;
+
 	blob_buf_init(&b, 0);
 	blobmsg_add_u16(&b, "frequency", frequency);
 	blobmsg_add_u16(&b, "width", chan_width);

feeds/ucentral/rrmd/files/usr/share/rrmd/station.uc

@@ -29,8 +29,9 @@ function station_add(device, addr, data, seen, bssid) {
 			beacon_report: {},
 		};
 
-		if (config.beacon_request_assoc)
+	/*	if (config.beacon_request_assoc)
 			stations[addr].beacon_request_assoc = time();
+	*/
 	}
 
 	/* update device, seen and signal data */
@@ -47,6 +48,7 @@ function station_add(device, addr, data, seen, bssid) {
 		global.event.send('rrm.station.add', { addr, rrm: stations[addr].rrm, bssid });
 
 	/* check if a beacon_report should be triggered */
+	/*
 	if (stations[addr].beacon_request_assoc && time() - stations[addr].beacon_request_assoc >= 30) {
 		global.station.beacon_request({ addr, channel: stations[addr].channel});
 		stations[addr].beacon_request_assoc = 0;	
@@ -56,6 +58,7 @@ function station_add(device, addr, data, seen, bssid) {
 		global.event.send('rrm.beacon.report', { addr, report: stations[addr].beacon_report });
 		stations[addr].beacon_report_seen = 0;
 	}
+	*/
 }
 
 function station_del(addr) {

feeds/ucentral/ucentral-client/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
-PKG_MIRROR_HASH:=279c58711c354372d570320651644bf75ce758c6197a7eb8dda481a925c82620
+PKG_MIRROR_HASH:=3fa810edd53a8c08ce3d8090a095fbc1697c70c50e00a78931400df59fe66eaf
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2022-06-22
-PKG_SOURCE_VERSION:=6ca7b2e43c20a92508bf408e586c310dfff38f51
+PKG_SOURCE_VERSION:=f19b1e86b7f36f4adc544e087cadd7907dabb5f0
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>

feeds/ucentral/ucentral-event/files/ucentral-event

@@ -126,7 +126,8 @@ handlers = {
 			vlan: [ `${notify.data.vlan_id}:u` ]  
 		};                                          
 		ubus.call('network.interface.up_none', 'add_device', msg);          
-
+		if (`${notify.data.vlan_id}` in config.config.swconfig_vlans)            
+                        return;          
 		msg = {                          
 			name: 'eth0.' + notify.data.vlan_id,
 			vlan: [ `${notify.data.vlan_id}:u` ]

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=8558ddc1b975a9b0bf1832c3277a99de95e9cf3682a671991d3125c04d375e96
+PKG_MIRROR_HASH:=8ab9a9361415e0302c502d1e92273b4b8098bca5e469783b6813d47b284ed965
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2022-05-29
-PKG_SOURCE_VERSION:=e77cd3fa1ea727cbdfc64f78aff2401a869edc27
+PKG_SOURCE_VERSION:=3093a565c4c28609089ac03a4c206fae0c89cb49
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-state/files/ucentral-state

@@ -147,9 +147,8 @@ let state_handler = {
 		led_write(led, 'trigger', 'heartbeat');
 		if (config.ui.offline_trigger) {
 			if (offline_timer)
-				offline_timer.set(config.ui.offline_trigger * 1000);
-			else
-				offline_timer = uloop.timer(config.ui.offline_trigger * 1000, offline_handler);
+				offline_timer.cancel();
+			offline_timer = uloop.timer(config.ui.offline_trigger * 1000, offline_handler);
 		}
 		return 0;
 	},

feeds/wifi-ax/hostapd/src/src/ap/ubus.c

@@ -1958,6 +1958,9 @@ void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequen
 	struct hostapd_data *hapd;
 	int i;
 
+	if (!ctx)
+		return;
+
 	blob_buf_init(&b, 0);
 	blobmsg_add_u16(&b, "frequency", frequency);
 	blobmsg_add_u16(&b, "width", chan_width);

patches/0073-hostapd-add-missing-NULL-pointer-check-on-radar-noti.patch

@@ -0,0 +1,27 @@
+From 20bf17b6bb9c40a14db5ed9744c3362afe4a67d8 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 9 Jan 2024 12:36:01 +0100
+Subject: [PATCH] hostapd: add missing NULL pointer check on radar notification
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ package/network/services/hostapd/src/src/ap/ubus.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/package/network/services/hostapd/src/src/ap/ubus.c b/package/network/services/hostapd/src/src/ap/ubus.c
+index 52f83c50f7..54361ea460 100644
+--- a/package/network/services/hostapd/src/src/ap/ubus.c
++++ b/package/network/services/hostapd/src/src/ap/ubus.c
+@@ -2125,6 +2125,9 @@ void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequen
+ 	struct hostapd_data *hapd;
+ 	int i;
+ 
++	if (!ctx)
++		return;
++
+ 	blob_buf_init(&b, 0);
+ 	blobmsg_add_u16(&b, "frequency", frequency);
+ 	blobmsg_add_u16(&b, "width", chan_width);
+-- 
+2.34.1
+

patches/0074-netifd-only-reload-swconfig-if-something-changed.patch

@@ -0,0 +1,30 @@
+From 66382792778a6647ec8809e3858e030b3bbf5554 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 15 Jan 2024 13:19:24 +0100
+Subject: [PATCH] netifd: only reload swconfig if something changed
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ package/network/config/netifd/files/etc/init.d/network | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/package/network/config/netifd/files/etc/init.d/network b/package/network/config/netifd/files/etc/init.d/network
+index dc208c4ce0..6af668f557 100755
+--- a/package/network/config/netifd/files/etc/init.d/network
++++ b/package/network/config/netifd/files/etc/init.d/network
+@@ -9,7 +9,11 @@ init_switch() {
+ 	setup_switch() { return 0; }
+ 
+ 	include /lib/network
+-	setup_switch
++        uci show network | grep @switch | sort | md5sum | cut -d" " -f1 > /var/run/swconfig.new
++        [ "$(cat /var/run/swconfig.new)" != "$(cat /var/run/swconfig.applied)" ] && {
++                mv /var/run/swconfig.new /var/run/swconfig.applied
++                setup_switch
++        }
+ }
+ 
+ start_service() {
+-- 
+2.34.1
+

patches/0075-ramips-reduce-yuncore-ax820-SPI-clock-speed-to-20MHz.patch

@@ -0,0 +1,26 @@
+From 594261d2f696136b9cb1d63fd4706248b5cd9ffa Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Wed, 17 Jan 2024 09:58:18 +0100
+Subject: [PATCH] ramips: reduce yuncore ax820 SPI clock speed to 20MHz
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ target/linux/ramips/dts/mt7621_yuncore_ax820.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
+index 51fd358095..b2f55b9be0 100644
+--- a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
++++ b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
+@@ -87,7 +87,7 @@
+ 	flash@0 {
+ 		compatible = "jedec,spi-nor";
+ 		reg = <0>;
+-		spi-max-frequency = <80000000>;
++		spi-max-frequency = <20000000>;
+ 		m25p,fast-read;
+ 
+ 		partitions {
+-- 
+2.34.1
+

patches/0076-rstrip.sh-do-not-strip-FW-binaries.patch

@@ -0,0 +1,26 @@
+From f8a801dee8bf0706e349f8f9a7ca1e1fb2fcd42a Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 22 Jan 2024 12:21:02 +0100
+Subject: [PATCH] rstrip.sh: do not strip FW binaries
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ scripts/rstrip.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/scripts/rstrip.sh b/scripts/rstrip.sh
+index e47960a941..2aa7e96fda 100755
+--- a/scripts/rstrip.sh
++++ b/scripts/rstrip.sh
+@@ -20,7 +20,7 @@ TARGETS=$*
+   exit 1
+ }
+ 
+-find $TARGETS -type f -a -exec file {} \; | \
++find $TARGETS -not -path \*/lib/firmware/\* -a -type f -a -exec file {} \; | \
+   sed -n -e 's/^\(.*\):.*ELF.*\(executable\|relocatable\|shared object\).*,.*/\1:\2/p' | \
+ (
+   IFS=":"
+-- 
+2.34.1
+