Merge pull request #613 from Telecominfraproject/v3.0.0-release

V3.0.0 release

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf189', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'cybertan_rap63xc-211g','sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'sercomm_ap72tip', 'udaya_a6-id2', 'udaya_a6-od2', 'wallys_dr5018', 'wallys_dr6018', 'wallys_dr6018-v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf660a', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap111', 'edgecore_ecw5211', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap102', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4xi_w', 'hfcl_ion4xi_HMR', 'hfcl_ion4x_w', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
 
     steps:
     - uses: actions/checkout@v3

LICENSE

@@ -1,28 +0,0 @@
-BSD 3-Clause License
-
-Copyright (c) 2024, Telecom Infra Project
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-3. Neither the name of the copyright holder nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

feeds/hfcl/hfcl/Makefile

@@ -1,29 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=hfcl
-PKG_VERSION:=1.0
-PKG_BUILD_DIR:= $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/hfcl
-        SECTION:=base
-        CATEGORY:=Utilities
-        TITLE:=hfcl
-endef
-
-define Build/Prepare
-        mkdir -p $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile/Default
-
-endef
-
-Build/Compile = $(Build/Compile/Default)
-
-define Package/hfcl/install
-	cp -rf ./files/* $(1)
-endef
-
-$(eval $(call BuildPackage,hfcl))

feeds/hfcl/hfcl/files/etc/ucentral_check.sh

@@ -1,43 +0,0 @@
-#!/bin/sh
-echo "Start Websocket check/recovery script"
-
-ucentral_conn=$(netstat -atulpn | grep -i ucentral | awk '{print $6}')
-hostname_AP=$(uci get system.@system[0].hostname)
-uc_file_check=$(du /etc/config/ucentral | awk '{print $1}' )
-sleep 20
-
-curr_date=$(date)
-
-if [[ "$uc_file_check" = 0 ]]
-then
-	echo "[[$curr_date]]  empty ucentral file found, need to factory reset"
-	ubi_mount=$(mount | grep ubifs | grep noatime | awk '{print $1}')
-	if [[ "$ubi_mount" != "/dev/ubi0_3" ]]
-	then
-		echo "[[$curr_date]]  ubifs not mounted, need to reboot before factory reset, mount was $ubi_mount"
-		/sbin/reboot
-	else
-		/sbin/jffs2reset -y -r
-	fi
-elif [[ "$hostname_AP" = "OpenWrt" ]]
-then
-	echo "[[$curr_date]] hostname set to openwrt, doing ucentral and capabilities load"
-	/usr/share/ucentral/capabilities.uc
-	rlink=$(readlink -f /etc/ucentral/ucentral.active)
-	/usr/share/ucentral/ucentral.uc /etc/ucentral/ucentral.active
-	rm -rf /etc/ucentral/ucentral.active
-	ln -s $rlink /etc/ucentral/ucentral.active
-	sleep 60
-	ucentral_check=$(netstat -atulpn | grep -i ucentral | awk '{print $6}')
-	if [[ "$ucentral_check" != "ESTABLIHED" ]]
-	then
-		echo "[[$curr_date]] loading didn't work, need to factory reset"
-		/sbin/jffs2reset -y -r
-	fi
-elif [[ "$ucentral_conn" != "ESTABLISHED" ]]
-then
-	echo "[[$curr_date]]  Ucentral either crashed or stopped, restarting the same"
-        /etc/init.d/ucentral restart
-else
-        echo "[[$curr_date]]  Ucentral working all fine, nothing to do"
-fi

feeds/hfcl/hfcl/files/etc/uci-defaults/abc-hfcl-ucentral

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-#rm -f /etc/rc.local
-#cp -f /etc/loop.local /etc/rc.local
-
-crontab -r
-
-/etc/init.d/cron enable
-
-/etc/init.d/cron start
-
-sleep 60
-
-crontab -l | { cat; echo "*/3 * * * * /bin/sh /etc/ucentral_check.sh >> /tmp/ucentral_check";} | crontab -
-
-crontab -l | { cat; echo "* */4 * * * rm -rf /tmp/ucentral_check";} | crontab -
-
-/etc/init.d/cron restart

feeds/hostapd/hostapd/Config.in

@@ -1,108 +0,0 @@
-# wpa_supplicant config
-config WPA_RFKILL_SUPPORT
-	bool "Add rfkill support"
-	depends on PACKAGE_wpa-supplicant || \
-		   PACKAGE_wpa-supplicant-openssl || \
-		   PACKAGE_wpa-supplicant-wolfssl || \
-		   PACKAGE_wpa-supplicant-mbedtls || \
-		   PACKAGE_wpa-supplicant-mesh-openssl || \
-		   PACKAGE_wpa-supplicant-mesh-wolfssl || \
-		   PACKAGE_wpa-supplicant-mesh-mbedtls || \
-		   PACKAGE_wpa-supplicant-basic || \
-		   PACKAGE_wpa-supplicant-mini || \
-		   PACKAGE_wpa-supplicant-p2p || \
-		   PACKAGE_wpad || \
-		   PACKAGE_wpad-openssl || \
-		   PACKAGE_wpad-wolfssl || \
-		   PACKAGE_wpad-mbedtls || \
-		   PACKAGE_wpad-basic || \
-		   PACKAGE_wpad-basic-openssl || \
-		   PACKAGE_wpad-basic-wolfssl || \
-		   PACKAGE_wpad-basic-mbedtls || \
-		   PACKAGE_wpad-mini || \
-		   PACKAGE_wpad-mesh-openssl || \
-		   PACKAGE_wpad-mesh-wolfssl || \
-		   PACKAGE_wpad-mesh-mbedtls
-	default n
-
-config WPA_MSG_MIN_PRIORITY
-	int "Minimum debug message priority"
-	depends on PACKAGE_wpa-supplicant || \
-		   PACKAGE_wpa-supplicant-openssl || \
-		   PACKAGE_wpa-supplicant-wolfssl || \
-		   PACKAGE_wpa-supplicant-mbedtls || \
-		   PACKAGE_wpa-supplicant-mesh-openssl || \
-		   PACKAGE_wpa-supplicant-mesh-wolfssl || \
-		   PACKAGE_wpa-supplicant-mesh-mbedtls || \
-		   PACKAGE_wpa-supplicant-basic || \
-		   PACKAGE_wpa-supplicant-mini || \
-		   PACKAGE_wpa-supplicant-p2p || \
-		   PACKAGE_wpad || \
-		   PACKAGE_wpad-openssl || \
-		   PACKAGE_wpad-wolfssl || \
-		   PACKAGE_wpad-mbedtls || \
-		   PACKAGE_wpad-basic || \
-		   PACKAGE_wpad-basic-openssl || \
-		   PACKAGE_wpad-basic-wolfssl || \
-		   PACKAGE_wpad-basic-mbedtls || \
-		   PACKAGE_wpad-mini || \
-		   PACKAGE_wpad-mesh-openssl || \
-		   PACKAGE_wpad-mesh-wolfssl || \
-		   PACKAGE_wpad-mesh-mbedtls
-	default 3
-	help
-	  Useful values are:
-	    0 = all messages
-		1 = raw message dumps
-		2 = most debugging messages
-		3 = info messages
-		4 = warnings
-		5 = errors
-
-config WPA_WOLFSSL
-	bool
-	default PACKAGE_wpa-supplicant-wolfssl ||\
-	        PACKAGE_wpad-wolfssl ||\
-	        PACKAGE_wpad-basic-wolfssl || \
-	        PACKAGE_wpad-mesh-wolfssl ||\
-	        PACKAGE_eapol-test-wolfssl
-	select WOLFSSL_HAS_AES_CCM
-	select WOLFSSL_HAS_ARC4
-	select WOLFSSL_HAS_DH
-	select WOLFSSL_HAS_OCSP
-	select WOLFSSL_HAS_SESSION_TICKET
-	select WOLFSSL_HAS_WPAS
-
-config DRIVER_11AC_SUPPORT
-	bool
-	default n
-
-config DRIVER_11AX_SUPPORT
-	bool
-	default n
-	select WPA_MBO_SUPPORT
-
-config WPA_ENABLE_WEP
-	bool "Enable support for unsecure and obsolete WEP"
-	help
-	  Wired equivalent privacy (WEP) is an obsolete cryptographic data
-	  confidentiality algorithm that is not considered secure. It should not be used
-	  for anything anymore. The functionality needed to use WEP is available in the
-	  current hostapd release under this optional build parameter and completely
-	  removed in a future release.
-
-config WPA_MBO_SUPPORT
-	bool "Multi Band Operation (Agile Multiband)"
-	default PACKAGE_wpa-supplicant || \
-		PACKAGE_wpa-supplicant-openssl || \
-		PACKAGE_wpa-supplicant-wolfssl || \
-		PACKAGE_wpa-supplicant-mbedtls || \
-		PACKAGE_wpad || \
-		PACKAGE_wpad-openssl || \
-		PACKAGE_wpad-wolfssl || \
-		PACKAGE_wpad-mbedtls
-	help
-	  Multi Band Operation aka (Agile Multiband) enables features
-	  that facilitate efficient use of multiple frequency bands.
-	  Enabling MBO on an AP using RSN requires 802.11w to be enabled.
-	  Hostapd will refuse to start if MBO and RSN are enabled without 11w.

feeds/hostapd/hostapd/Makefile

@@ -1,851 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) 2006-2021 OpenWrt.org
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=hostapd
-PKG_RELEASE:=4
-
-PKG_SOURCE_URL:=http://w1.fi/hostap.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2023-09-08
-PKG_SOURCE_VERSION:=e5ccbfc69ecf297590341ae8b461edba9d8e964c
-PKG_MIRROR_HASH:=fcc6550f46c7f8bbdbf71e63f8f699b9a0878565ad1b90a17855f5ec21283b8f
-
-PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
-PKG_LICENSE:=BSD-3-Clause
-PKG_CPE_ID:=cpe:/a:w1.fi:hostapd
-
-PKG_BUILD_PARALLEL:=1
-PKG_ASLR_PIE_REGULAR:=1
-
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_PACKAGE_hostapd \
-	CONFIG_PACKAGE_hostapd-basic \
-	CONFIG_PACKAGE_hostapd-mini \
-	CONFIG_WPA_RFKILL_SUPPORT \
-	CONFIG_DRIVER_11AC_SUPPORT \
-	CONFIG_DRIVER_11AX_SUPPORT \
-	CONFIG_WPA_ENABLE_WEP
-
-PKG_BUILD_FLAGS:=gc-sections lto
-
-EAPOL_TEST_PROVIDERS:=eapol-test eapol-test-openssl eapol-test-wolfssl
-
-SUPPLICANT_PROVIDERS:=
-HOSTAPD_PROVIDERS:=
-
-LOCAL_TYPE=$(strip \
-		$(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
-		$(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \
-		hostapd \
-		)))
-
-LOCAL_AND_LIB_VARIANT=$(patsubst hostapd-%,%,\
-		      $(patsubst wpad-%,%,\
-		      $(patsubst supplicant-%,%,\
-		      $(BUILD_VARIANT)\
-		      )))
-
-LOCAL_VARIANT=$(patsubst %-internal,%,\
-	      $(patsubst %-openssl,%,\
-	      $(patsubst %-wolfssl,%,\
-	      $(patsubst %-mbedtls,%,\
-	      $(LOCAL_AND_LIB_VARIANT)\
-	      ))))
-
-SSL_VARIANT=$(strip \
-		$(if $(findstring openssl,$(LOCAL_AND_LIB_VARIANT)),openssl,\
-		$(if $(findstring wolfssl,$(LOCAL_AND_LIB_VARIANT)),wolfssl,\
-		$(if $(findstring mbedtls,$(LOCAL_AND_LIB_VARIANT)),mbedtls,\
-		internal\
-		))))
-
-CONFIG_VARIANT:=$(LOCAL_VARIANT)
-ifeq ($(LOCAL_VARIANT),mesh)
-  CONFIG_VARIANT:=full
-endif
-
-include $(INCLUDE_DIR)/package.mk
-
-STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY)
-
-ifneq ($(CONFIG_DRIVER_11AC_SUPPORT),)
-  HOSTAPD_IEEE80211AC:=y
-endif
-
-ifneq ($(CONFIG_DRIVER_11AX_SUPPORT),)
-  HOSTAPD_IEEE80211AX:=y
-endif
-
-CORE_DEPENDS = +ucode +libubus +libucode +ucode-mod-fs +ucode-mod-nl80211 +ucode-mod-rtnl +ucode-mod-ubus +ucode-mod-uloop +libblobmsg-json
-OPENSSL_DEPENDS = +PACKAGE_$(1):libopenssl +PACKAGE_$(1):libopenssl-legacy
-
-DRIVER_MAKEOPTS= \
-	CONFIG_ACS=y CONFIG_DRIVER_NL80211=y \
-	CONFIG_IEEE80211AC=$(HOSTAPD_IEEE80211AC) \
-	CONFIG_IEEE80211AX=$(HOSTAPD_IEEE80211AX) \
-	CONFIG_MBO=$(CONFIG_WPA_MBO_SUPPORT) \
-	CONFIG_UCODE=y
-
-ifeq ($(SSL_VARIANT),openssl)
-  DRIVER_MAKEOPTS += CONFIG_TLS=openssl CONFIG_SAE=y
-  TARGET_LDFLAGS += -lcrypto -lssl
-
-  ifeq ($(LOCAL_VARIANT),basic)
-    DRIVER_MAKEOPTS += CONFIG_OWE=y
-  endif
-  ifeq ($(LOCAL_VARIANT),mesh)
-    DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y
-  endif
-  ifeq ($(LOCAL_VARIANT),full)
-    DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y
-  endif
-endif
-
-ifeq ($(SSL_VARIANT),wolfssl)
-  DRIVER_MAKEOPTS += CONFIG_TLS=wolfssl CONFIG_SAE=y
-  TARGET_LDFLAGS += -lwolfssl
-
-  ifeq ($(LOCAL_VARIANT),basic)
-    DRIVER_MAKEOPTS += CONFIG_OWE=y
-  endif
-  ifeq ($(LOCAL_VARIANT),mesh)
-    DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
-  endif
-  ifeq ($(LOCAL_VARIANT),full)
-    DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
-  endif
-endif
-
-ifeq ($(SSL_VARIANT),mbedtls)
-  DRIVER_MAKEOPTS += CONFIG_TLS=mbedtls CONFIG_SAE=y
-  TARGET_LDFLAGS += -lmbedcrypto -lmbedx509 -lmbedtls
-
-  ifeq ($(LOCAL_VARIANT),basic)
-    DRIVER_MAKEOPTS += CONFIG_OWE=y
-  endif
-  ifeq ($(LOCAL_VARIANT),mesh)
-    DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
-  endif
-  ifeq ($(LOCAL_VARIANT),full)
-    DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
-  endif
-endif
-
-ifneq ($(LOCAL_TYPE),hostapd)
-  ifdef CONFIG_WPA_RFKILL_SUPPORT
-    DRIVER_MAKEOPTS += NEED_RFKILL=y
-  endif
-endif
-
-DRV_DEPENDS:=+libnl-tiny
-
-
-define Package/hostapd/Default
-  SECTION:=net
-  CATEGORY:=Network
-  SUBMENU:=WirelessAPD
-  TITLE:=IEEE 802.1x Authenticator
-  URL:=http://hostap.epitest.fi/
-  DEPENDS:=$(DRV_DEPENDS) +hostapd-common $(CORE_DEPENDS)
-  EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
-  USERID:=network=101:network=101
-  PROVIDES:=hostapd
-  CONFLICTS:=$(HOSTAPD_PROVIDERS)
-  HOSTAPD_PROVIDERS+=$(1)
-endef
-
-define Package/hostapd
-$(call Package/hostapd/Default,$(1))
-  TITLE+= (built-in full)
-  VARIANT:=full-internal
-endef
-
-define Package/hostapd/description
- This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
- Authenticator.
-endef
-
-define Package/hostapd-openssl
-$(call Package/hostapd/Default,$(1))
-  TITLE+= (OpenSSL full)
-  VARIANT:=full-openssl
-  DEPENDS+=$(OPENSSL_DEPENDS)
-endef
-
-Package/hostapd-openssl/description = $(Package/hostapd/description)
-
-define Package/hostapd-wolfssl
-$(call Package/hostapd/Default,$(1))
-  TITLE+= (wolfSSL full)
-  VARIANT:=full-wolfssl
-  DEPENDS+=+PACKAGE_hostapd-wolfssl:libwolfssl
-endef
-
-Package/hostapd-wolfssl/description = $(Package/hostapd/description)
-
-define Package/hostapd-mbedtls
-$(call Package/hostapd/Default,$(1))
-  TITLE+= (mbedTLS full)
-  VARIANT:=full-mbedtls
-  DEPENDS+=+PACKAGE_hostapd-mbedtls:libmbedtls
-endef
-
-Package/hostapd-mbedtls/description = $(Package/hostapd/description)
-
-define Package/hostapd-basic
-$(call Package/hostapd/Default,$(1))
-  TITLE+= (WPA-PSK, 11r, 11w)
-  VARIANT:=basic
-endef
-
-define Package/hostapd-basic/description
- This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
-endef
-
-define Package/hostapd-basic-openssl
-$(call Package/hostapd/Default,$(1))
-  TITLE+= (WPA-PSK, 11r and 11w)
-  VARIANT:=basic-openssl
-  DEPENDS+=+PACKAGE_hostapd-basic-openssl:libopenssl
-endef
-
-define Package/hostapd-basic-openssl/description
- This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
-endef
-
-define Package/hostapd-basic-wolfssl
-$(call Package/hostapd/Default,$(1))
-  TITLE+= (WPA-PSK, 11r and 11w)
-  VARIANT:=basic-wolfssl
-  DEPENDS+=+PACKAGE_hostapd-basic-wolfssl:libwolfssl
-endef
-
-define Package/hostapd-basic-wolfssl/description
- This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
-endef
-
-define Package/hostapd-basic-mbedtls
-$(call Package/hostapd/Default,$(1))
-  TITLE+= (WPA-PSK, 11r and 11w)
-  VARIANT:=basic-mbedtls
-  DEPENDS+=+PACKAGE_hostapd-basic-mbedtls:libmbedtls
-endef
-
-define Package/hostapd-basic-mbedtls/description
- This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
-endef
-
-define Package/hostapd-mini
-$(call Package/hostapd/Default,$(1))
-  TITLE+= (WPA-PSK only)
-  VARIANT:=mini
-endef
-
-define Package/hostapd-mini/description
- This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only).
-endef
-
-
-define Package/wpad/Default
-  SECTION:=net
-  CATEGORY:=Network
-  SUBMENU:=WirelessAPD
-  TITLE:=IEEE 802.1x Auth/Supplicant
-  DEPENDS:=$(DRV_DEPENDS) +hostapd-common $(CORE_DEPENDS)
-  EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
-  USERID:=network=101:network=101
-  URL:=http://hostap.epitest.fi/
-  PROVIDES:=hostapd wpa-supplicant
-  CONFLICTS:=$(HOSTAPD_PROVIDERS) $(SUPPLICANT_PROVIDERS)
-  HOSTAPD_PROVIDERS+=$(1)
-  SUPPLICANT_PROVIDERS+=$(1)
-endef
-
-define Package/wpad
-$(call Package/wpad/Default,$(1))
-  TITLE+= (built-in full)
-  VARIANT:=wpad-full-internal
-endef
-
-define Package/wpad/description
- This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
- Authenticator and Supplicant
-endef
-
-define Package/wpad-openssl
-$(call Package/wpad/Default,$(1))
-  TITLE+= (OpenSSL full)
-  VARIANT:=wpad-full-openssl
-  DEPENDS+=$(OPENSSL_DEPENDS)
-endef
-
-Package/wpad-openssl/description = $(Package/wpad/description)
-
-define Package/wpad-wolfssl
-$(call Package/wpad/Default,$(1))
-  TITLE+= (wolfSSL full)
-  VARIANT:=wpad-full-wolfssl
-  DEPENDS+=+PACKAGE_wpad-wolfssl:libwolfssl
-endef
-
-Package/wpad-wolfssl/description = $(Package/wpad/description)
-
-define Package/wpad-mbedtls
-$(call Package/wpad/Default,$(1))
-  TITLE+= (mbedTLS full)
-  VARIANT:=wpad-full-mbedtls
-  DEPENDS+=+PACKAGE_wpad-mbedtls:libmbedtls
-endef
-
-Package/wpad-mbedtls/description = $(Package/wpad/description)
-
-define Package/wpad-basic
-$(call Package/wpad/Default,$(1))
-  TITLE+= (WPA-PSK, 11r, 11w)
-  VARIANT:=wpad-basic
-endef
-
-define Package/wpad-basic/description
- This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, 802.11r and 802.11w support.
-endef
-
-define Package/wpad-basic-openssl
-$(call Package/wpad/Default,$(1))
-  TITLE+= (OpenSSL, 11r, 11w)
-  VARIANT:=wpad-basic-openssl
-  DEPENDS+=$(OPENSSL_DEPENDS)
-endef
-
-define Package/wpad-basic-openssl/description
- This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
-endef
-
-define Package/wpad-basic-wolfssl
-$(call Package/wpad/Default,$(1))
-  TITLE+= (wolfSSL, 11r, 11w)
-  VARIANT:=wpad-basic-wolfssl
-  DEPENDS+=+PACKAGE_wpad-basic-wolfssl:libwolfssl
-endef
-
-define Package/wpad-basic-wolfssl/description
- This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
-endef
-
-define Package/wpad-basic-mbedtls
-$(call Package/wpad/Default,$(1))
-  TITLE+= (mbedTLS, 11r, 11w)
-  VARIANT:=wpad-basic-mbedtls
-  DEPENDS+=+PACKAGE_wpad-basic-mbedtls:libmbedtls
-endef
-
-define Package/wpad-basic-mbedtls/description
- This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
-endef
-
-define Package/wpad-mini
-$(call Package/wpad/Default,$(1))
-  TITLE+= (WPA-PSK only)
-  VARIANT:=wpad-mini
-endef
-
-define Package/wpad-mini/description
- This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).
-endef
-
-define Package/wpad-mesh
-$(call Package/wpad/Default,$(1))
-  DEPENDS+=@(!TARGET_uml||BROKEN)
-  PROVIDES+=wpa-supplicant-mesh wpad-mesh
-endef
-
-define Package/wpad-mesh/description
- This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support).
-endef
-
-define Package/wpad-mesh-openssl
-$(call Package/wpad-mesh,$(1))
-  TITLE+= (OpenSSL, 11s, SAE)
-  DEPENDS+=$(OPENSSL_DEPENDS)
-  VARIANT:=wpad-mesh-openssl
-endef
-
-Package/wpad-mesh-openssl/description = $(Package/wpad-mesh/description)
-
-define Package/wpad-mesh-wolfssl
-$(call Package/wpad-mesh,$(1))
-  TITLE+= (wolfSSL, 11s, SAE)
-  DEPENDS+=+PACKAGE_wpad-mesh-wolfssl:libwolfssl
-  VARIANT:=wpad-mesh-wolfssl
-endef
-
-Package/wpad-mesh-wolfssl/description = $(Package/wpad-mesh/description)
-
-define Package/wpad-mesh-mbedtls
-$(call Package/wpad-mesh,$(1))
-  TITLE+= (mbedTLS, 11s, SAE)
-  DEPENDS+=+PACKAGE_wpad-mesh-mbedtls:libmbedtls
-  VARIANT:=wpad-mesh-mbedtls
-endef
-
-Package/wpad-mesh-mbedtls/description = $(Package/wpad-mesh/description)
-
-
-define Package/wpa-supplicant/Default
-  SECTION:=net
-  CATEGORY:=Network
-  SUBMENU:=WirelessAPD
-  TITLE:=WPA Supplicant
-  URL:=http://hostap.epitest.fi/wpa_supplicant/
-  DEPENDS:=$(DRV_DEPENDS) +hostapd-common $(CORE_DEPENDS)
-  EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
-  USERID:=network=101:network=101
-  PROVIDES:=wpa-supplicant
-  CONFLICTS:=$(SUPPLICANT_PROVIDERS)
-  SUPPLICANT_PROVIDERS+=$(1)
-endef
-
-define Package/wpa-supplicant
-$(call Package/wpa-supplicant/Default,$(1))
-  TITLE+= (built-in full)
-  VARIANT:=supplicant-full-internal
-endef
-
-define Package/wpa-supplicant-openssl
-$(call Package/wpa-supplicant/Default,$(1))
-  TITLE+= (OpenSSL full)
-  VARIANT:=supplicant-full-openssl
-  DEPENDS+=$(OPENSSL_DEPENDS)
-endef
-
-define Package/wpa-supplicant-wolfssl
-$(call Package/wpa-supplicant/Default,$(1))
-  TITLE+= (wolfSSL full)
-  VARIANT:=supplicant-full-wolfssl
-  DEPENDS+=+PACKAGE_wpa-supplicant-wolfssl:libwolfssl
-endef
-
-define Package/wpa-supplicant-mbedtls
-$(call Package/wpa-supplicant/Default,$(1))
-  TITLE+= (mbedTLS full)
-  VARIANT:=supplicant-full-mbedtls
-  DEPENDS+=+PACKAGE_wpa-supplicant-mbedtls:libmbedtls
-endef
-
-define Package/wpa-supplicant/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/wpa-supplicant-p2p
-$(call Package/wpa-supplicant/Default,$(1))
-  TITLE+= (Wi-Fi P2P support)
-  VARIANT:=supplicant-p2p-internal
-endef
-
-define Package/wpa-supplicant-mesh/Default
-$(call Package/wpa-supplicant/Default,$(1))
-  DEPENDS+=@(!TARGET_uml||BROKEN)
-  PROVIDES+=wpa-supplicant-mesh
-endef
-
-define Package/wpa-supplicant-mesh-openssl
-$(call Package/wpa-supplicant-mesh/Default,$(1))
-  TITLE+= (OpenSSL, 11s, SAE)
-  VARIANT:=supplicant-mesh-openssl
-  DEPENDS+=$(OPENSSL_DEPENDS)
-endef
-
-define Package/wpa-supplicant-mesh-wolfssl
-$(call Package/wpa-supplicant-mesh/Default,$(1))
-  TITLE+= (wolfSSL, 11s, SAE)
-  VARIANT:=supplicant-mesh-wolfssl
-  DEPENDS+=+PACKAGE_wpa-supplicant-mesh-wolfssl:libwolfssl
-endef
-
-define Package/wpa-supplicant-mesh-mbedtls
-$(call Package/wpa-supplicant-mesh/Default,$(1))
-  TITLE+= (mbedTLS, 11s, SAE)
-  VARIANT:=supplicant-mesh-mbedtls
-  DEPENDS+=+PACKAGE_wpa-supplicant-mesh-mbedtls:libmbedtls
-endef
-
-define Package/wpa-supplicant-basic
-$(call Package/wpa-supplicant/Default,$(1))
-  TITLE+= (11r, 11w)
-  VARIANT:=supplicant-basic
-endef
-
-define Package/wpa-supplicant-mini
-$(call Package/wpa-supplicant/Default,$(1))
-  TITLE+= (minimal)
-  VARIANT:=supplicant-mini
-endef
-
-
-define Package/hostapd-common
-  TITLE:=hostapd/wpa_supplicant common support files
-  SECTION:=net
-  CATEGORY:=Network
-  SUBMENU:=WirelessAPD
-endef
-
-define Package/hostapd-utils
-  SECTION:=net
-  CATEGORY:=Network
-  SUBMENU:=WirelessAPD
-  TITLE:=IEEE 802.1x Authenticator (utils)
-  URL:=http://hostap.epitest.fi/
-  DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(HOSTAPD_PROVIDERS),PACKAGE_$(pkg)))
-  VARIANT:=*
-endef
-
-define Package/hostapd-utils/description
- This package contains a command line utility to control the
- IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
-endef
-
-define Package/wpa-cli
-  SECTION:=net
-  CATEGORY:=Network
-  SUBMENU:=WirelessAPD
-  DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(SUPPLICANT_PROVIDERS),PACKAGE_$(pkg)))
-  TITLE:=WPA Supplicant command line control utility
-  VARIANT:=*
-endef
-
-define Package/eapol-test/Default
-  TITLE:=802.1x auth test utility
-  SECTION:=net
-  SUBMENU:=WirelessAPD
-  CATEGORY:=Network
-  DEPENDS:=$(DRV_DEPENDS) $(CORE_DEPENDS)
-endef
-
-define Package/eapol-test
-  $(call Package/eapol-test/Default,$(1))
-  TITLE+= (built-in full)
-  VARIANT:=supplicant-full-internal
-endef
-
-define Package/eapol-test-openssl
-  $(call Package/eapol-test/Default,$(1))
-  TITLE+= (OpenSSL full)
-  VARIANT:=supplicant-full-openssl
-  CONFLICTS:=$(filter-out eapol-test-openssl ,$(EAPOL_TEST_PROVIDERS))
-  DEPENDS+=$(OPENSSL_DEPENDS)
-  PROVIDES:=eapol-test
-endef
-
-define Package/eapol-test-wolfssl
-  $(call Package/eapol-test/Default,$(1))
-  TITLE+= (wolfSSL full)
-  VARIANT:=supplicant-full-wolfssl
-  CONFLICTS:=$(filter-out eapol-test-openssl ,$(filter-out eapol-test-wolfssl ,$(EAPOL_TEST_PROVIDERS)))
-  DEPENDS+=+PACKAGE_eapol-test-wolfssl:libwolfssl
-  PROVIDES:=eapol-test
-endef
-
-define Package/eapol-test-mbedtls
-  $(call Package/eapol-test/Default,$(1))
-  TITLE+= (mbedTLS full)
-  VARIANT:=supplicant-full-mbedtls
-  CONFLICTS:=$(filter-out eapol-test-openssl ,$(filter-out eapol-test-mbedtls ,$(EAPOL_TEST_PROVIDERS)))
-  DEPENDS+=+PACKAGE_eapol-test-mbedtls:libmbedtls
-  PROVIDES:=eapol-test
-endef
-
-
-ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
-  define Build/Configure/rebuild
-	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f
-	rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
-	rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant
-	rm -f $(PKG_BUILD_DIR)/.config_*
-	touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
-  endef
-endif
-
-define Build/Configure
-	$(Build/Configure/rebuild)
-	$(if $(wildcard ./files/hostapd-$(CONFIG_VARIANT).config), \
-		$(CP) ./files/hostapd-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config \
-	)
-	$(if $(wildcard ./files/wpa_supplicant-$(CONFIG_VARIANT).config), \
-		$(CP) ./files/wpa_supplicant-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config
-	)
-endef
-
-TARGET_CPPFLAGS := \
-	-I$(STAGING_DIR)/usr/include/libnl-tiny \
-	-I$(PKG_BUILD_DIR)/src/crypto \
-	$(TARGET_CPPFLAGS) \
-	-DCONFIG_LIBNL20 \
-	-D_GNU_SOURCE \
-	$(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY))
-
-TARGET_LDFLAGS += -lubox -lubus -lblobmsg_json -lucode -lm -lnl-tiny
-
-ifdef CONFIG_WPA_ENABLE_WEP
-    DRIVER_MAKEOPTS += CONFIG_WEP=y
-endif
-
-define Build/RunMake
-	CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
-	$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \
-		$(TARGET_CONFIGURE_OPTS) \
-		$(DRIVER_MAKEOPTS) \
-		LIBS="$(TARGET_LDFLAGS)" \
-		LIBS_c="$(TARGET_LDFLAGS_C)" \
-		AR="$(TARGET_CROSS)gcc-ar" \
-		BCHECK= \
-		$(if $(findstring s,$(OPENWRT_VERBOSE)),V=1) \
-		$(2)
-endef
-
-define Build/Compile/wpad
-	echo ` \
-		$(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \
-		$(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \
-		sed -e 's,-n ,,g' -e 's^$(TARGET_CFLAGS)^^' \
-	` > $(PKG_BUILD_DIR)/.cflags
-	sed -i 's/"/\\"/g' $(PKG_BUILD_DIR)/.cflags
-	+$(call Build/RunMake,hostapd, \
-		CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
-		MULTICALL=1 \
-		hostapd_cli hostapd_multi.a \
-	)
-	+$(call Build/RunMake,wpa_supplicant, \
-		CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
-		MULTICALL=1 \
-		wpa_cli wpa_supplicant_multi.a \
-	)
-	+export MAKEFLAGS="$(MAKE_JOBSERVER)"; $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \
-		$(TARGET_CFLAGS) \
-		./files/multicall.c \
-		$(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \
-		$(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \
-		$(TARGET_LDFLAGS)
-endef
-
-define Build/Compile/hostapd
-	+$(call Build/RunMake,hostapd, \
-		hostapd hostapd_cli \
-	)
-endef
-
-define Build/Compile/supplicant
-	+$(call Build/RunMake,wpa_supplicant, \
-		wpa_cli wpa_supplicant \
-	)
-endef
-
-define Build/Compile/supplicant-full-internal
-	+$(call Build/RunMake,wpa_supplicant, \
-		eapol_test \
-	)
-endef
-
-define Build/Compile/supplicant-full-openssl
-	+$(call Build/RunMake,wpa_supplicant, \
-		eapol_test \
-	)
-endef
-
-define Build/Compile/supplicant-full-wolfssl
-	+$(call Build/RunMake,wpa_supplicant, \
-		eapol_test \
-	)
-endef
-
-define Build/Compile/supplicant-full-mbedtls
-	+$(call Build/RunMake,wpa_supplicant, \
-		eapol_test \
-	)
-endef
-
-define Build/Compile
-	$(Build/Compile/$(LOCAL_TYPE))
-	$(Build/Compile/$(BUILD_VARIANT))
-endef
-
-define Install/hostapd/full
-	$(INSTALL_DIR) $(1)/etc/init.d $(1)/etc/config $(1)/etc/radius
-	ln -sf hostapd $(1)/usr/sbin/hostapd-radius
-	$(INSTALL_BIN) ./files/radius.init $(1)/etc/init.d/radius
-	$(INSTALL_DATA) ./files/radius.config $(1)/etc/config/radius
-	$(INSTALL_DATA) ./files/radius.clients $(1)/etc/radius/clients
-	$(INSTALL_DATA) ./files/radius.users $(1)/etc/radius/users
-endef
-
-define Package/hostapd-full/conffiles
-/etc/config/radius
-/etc/radius
-endef
-
-ifeq ($(CONFIG_VARIANT),full)
-Package/wpad-mesh-openssl/conffiles = $(Package/hostapd-full/conffiles)
-Package/wpad-mesh-wolfssl/conffiles = $(Package/hostapd-full/conffiles)
-Package/wpad-mesh-mbedtls/conffiles = $(Package/hostapd-full/conffiles)
-Package/wpad/conffiles = $(Package/hostapd-full/conffiles)
-Package/wpad-openssl/conffiles = $(Package/hostapd-full/conffiles)
-Package/wpad-wolfssl/conffiles = $(Package/hostapd-full/conffiles)
-Package/wpad-mbedtls/conffiles = $(Package/hostapd-full/conffiles)
-Package/hostapd/conffiles = $(Package/hostapd-full/conffiles)
-Package/hostapd-openssl/conffiles = $(Package/hostapd-full/conffiles)
-Package/hostapd-wolfssl/conffiles = $(Package/hostapd-full/conffiles)
-Package/hostapd-mbedtls/conffiles = $(Package/hostapd-full/conffiles)
-endif
-
-define Install/hostapd
-	$(INSTALL_DIR) $(1)/usr/sbin $(1)/usr/share/hostap
-	$(INSTALL_DATA) ./files/hostapd.uc $(1)/usr/share/hostap/
-	$(if $(findstring full,$(CONFIG_VARIANT)),$(Install/hostapd/full))
-endef
-
-define Install/supplicant
-	$(INSTALL_DIR) $(1)/usr/sbin $(1)/usr/share/hostap
-	$(INSTALL_DATA) ./files/wpa_supplicant.uc $(1)/usr/share/hostap/
-endef
-
-define Package/hostapd-common/install
-	$(INSTALL_DIR) $(1)/etc/capabilities $(1)/etc/rc.button $(1)/etc/hotplug.d/ieee80211 $(1)/etc/init.d $(1)/lib/netifd  $(1)/usr/share/acl.d $(1)/usr/share/hostap
-	$(INSTALL_BIN) ./files/dhcp-get-server.sh $(1)/lib/netifd/dhcp-get-server.sh
-	$(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/netifd/hostapd.sh
-	$(INSTALL_BIN) ./files/wpad.init $(1)/etc/init.d/wpad
-	$(INSTALL_BIN) ./files/wps-hotplug.sh $(1)/etc/rc.button/wps
-	$(INSTALL_DATA) ./files/wpad_acl.json $(1)/usr/share/acl.d
-	$(INSTALL_DATA) ./files/wpad.json $(1)/etc/capabilities
-	$(INSTALL_DATA) ./files/common.uc $(1)/usr/share/hostap/
-	$(INSTALL_DATA) ./files/wdev.uc $(1)/usr/share/hostap/
-endef
-
-define Package/hostapd/install
-	$(call Install/hostapd,$(1))
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
-endef
-Package/hostapd-basic/install = $(Package/hostapd/install)
-Package/hostapd-basic-openssl/install = $(Package/hostapd/install)
-Package/hostapd-basic-wolfssl/install = $(Package/hostapd/install)
-Package/hostapd-basic-mbedtls/install = $(Package/hostapd/install)
-Package/hostapd-mini/install = $(Package/hostapd/install)
-Package/hostapd-openssl/install = $(Package/hostapd/install)
-Package/hostapd-wolfssl/install = $(Package/hostapd/install)
-Package/hostapd-mbedtls/install = $(Package/hostapd/install)
-
-ifneq ($(LOCAL_TYPE),supplicant)
-  define Package/hostapd-utils/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
-  endef
-endif
-
-define Package/wpad/install
-	$(call Install/hostapd,$(1))
-	$(call Install/supplicant,$(1))
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
-	$(LN) wpad $(1)/usr/sbin/hostapd
-	$(LN) wpad $(1)/usr/sbin/wpa_supplicant
-endef
-Package/wpad-basic/install = $(Package/wpad/install)
-Package/wpad-basic-openssl/install = $(Package/wpad/install)
-Package/wpad-basic-wolfssl/install = $(Package/wpad/install)
-Package/wpad-basic-mbedtls/install = $(Package/wpad/install)
-Package/wpad-mini/install = $(Package/wpad/install)
-Package/wpad-openssl/install = $(Package/wpad/install)
-Package/wpad-wolfssl/install = $(Package/wpad/install)
-Package/wpad-mbedtls/install = $(Package/wpad/install)
-Package/wpad-mesh-openssl/install = $(Package/wpad/install)
-Package/wpad-mesh-wolfssl/install = $(Package/wpad/install)
-Package/wpad-mesh-mbedtls/install = $(Package/wpad/install)
-
-define Package/wpa-supplicant/install
-	$(call Install/supplicant,$(1))
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/
-endef
-Package/wpa-supplicant-basic/install = $(Package/wpa-supplicant/install)
-Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install)
-Package/wpa-supplicant-p2p/install = $(Package/wpa-supplicant/install)
-Package/wpa-supplicant-openssl/install = $(Package/wpa-supplicant/install)
-Package/wpa-supplicant-wolfssl/install = $(Package/wpa-supplicant/install)
-Package/wpa-supplicant-mbedtls/install = $(Package/wpa-supplicant/install)
-Package/wpa-supplicant-mesh-openssl/install = $(Package/wpa-supplicant/install)
-Package/wpa-supplicant-mesh-wolfssl/install = $(Package/wpa-supplicant/install)
-Package/wpa-supplicant-mesh-mbedtls/install = $(Package/wpa-supplicant/install)
-
-ifneq ($(LOCAL_TYPE),hostapd)
-  define Package/wpa-cli/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
-  endef
-endif
-
-ifeq ($(BUILD_VARIANT),supplicant-full-internal)
-  define Package/eapol-test/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
-  endef
-endif
-
-ifeq ($(BUILD_VARIANT),supplicant-full-openssl)
-  define Package/eapol-test-openssl/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
-  endef
-endif
-
-ifeq ($(BUILD_VARIANT),supplicant-full-wolfssl)
-  define Package/eapol-test-wolfssl/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
-  endef
-endif
-
-ifeq ($(BUILD_VARIANT),supplicant-full-mbedtls)
-  define Package/eapol-test-mbedtls/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
-  endef
-endif
-
-# Build hostapd-common before its dependents, to avoid
-# spurious rebuilds when building multiple variants.
-$(eval $(call BuildPackage,hostapd-common))
-$(eval $(call BuildPackage,hostapd))
-$(eval $(call BuildPackage,hostapd-basic))
-$(eval $(call BuildPackage,hostapd-basic-openssl))
-$(eval $(call BuildPackage,hostapd-basic-wolfssl))
-$(eval $(call BuildPackage,hostapd-basic-mbedtls))
-$(eval $(call BuildPackage,hostapd-mini))
-$(eval $(call BuildPackage,hostapd-openssl))
-$(eval $(call BuildPackage,hostapd-wolfssl))
-$(eval $(call BuildPackage,hostapd-mbedtls))
-$(eval $(call BuildPackage,wpad))
-$(eval $(call BuildPackage,wpad-mesh-openssl))
-$(eval $(call BuildPackage,wpad-mesh-wolfssl))
-$(eval $(call BuildPackage,wpad-mesh-mbedtls))
-$(eval $(call BuildPackage,wpad-basic))
-$(eval $(call BuildPackage,wpad-basic-openssl))
-$(eval $(call BuildPackage,wpad-basic-wolfssl))
-$(eval $(call BuildPackage,wpad-basic-mbedtls))
-$(eval $(call BuildPackage,wpad-mini))
-$(eval $(call BuildPackage,wpad-openssl))
-$(eval $(call BuildPackage,wpad-wolfssl))
-$(eval $(call BuildPackage,wpad-mbedtls))
-$(eval $(call BuildPackage,wpa-supplicant))
-$(eval $(call BuildPackage,wpa-supplicant-mesh-openssl))
-$(eval $(call BuildPackage,wpa-supplicant-mesh-wolfssl))
-$(eval $(call BuildPackage,wpa-supplicant-mesh-mbedtls))
-$(eval $(call BuildPackage,wpa-supplicant-basic))
-$(eval $(call BuildPackage,wpa-supplicant-mini))
-$(eval $(call BuildPackage,wpa-supplicant-p2p))
-$(eval $(call BuildPackage,wpa-supplicant-openssl))
-$(eval $(call BuildPackage,wpa-supplicant-wolfssl))
-$(eval $(call BuildPackage,wpa-supplicant-mbedtls))
-$(eval $(call BuildPackage,wpa-cli))
-$(eval $(call BuildPackage,hostapd-utils))
-$(eval $(call BuildPackage,eapol-test))
-$(eval $(call BuildPackage,eapol-test-openssl))
-$(eval $(call BuildPackage,eapol-test-wolfssl))
-$(eval $(call BuildPackage,eapol-test-mbedtls))

feeds/hostapd/hostapd/README.md

@@ -1,419 +0,0 @@
-# UBUS methods - hostapd
-
-## bss_mgmt_enable
-Enable 802.11k/v features.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| neighbor_report | bool | no | enable 802.11k neighbor reports |
-| beacon_report | bool | no | enable 802.11k beacon reports |
-| link_measurements | bool | no | enable 802.11k link measurements |
-| bss_transition | bool | no | enable 802.11v BSS transition support |
-
-### example
-`ubus call hostapd.wl5-fb bss_mgmt_enable '{ "neighbor_report": true, "beacon_report": true, "link_measurements": true, "bss_transition": true
-}'`
-
-
-## bss_transition_request
-Initiate an 802.11v transition request.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| addr | string | yes | client MAC address |
-| disassociation_imminent | bool | no | set Disassociation Imminent bit |
-| disassociation_timer | int32 | no | disassociate client if it doesn't roam after this time |
-| validity_period | int32 | no | validity of the BSS Transition Candiate List |
-| neighbors | array | no | BSS Transition Candidate List |
-| abridged | bool | no | prefer APs in the BSS Transition Candidate List |
-| dialog_token | int32 | no | identifier for the request/report transaction |
-| mbo_reason | int32 | no | MBO Transition Reason Code Attribute |
-| cell_pref | int32 | no | MBO Cellular Data Connection Preference Attribute |
-| reassoc_delay | int32 | no | MBO Re-association retry delay |
-
-### example
-`ubus call hostapd.wl5-fb bss_transition_request '{ "addr": "68:2F:67:8B:98:ED", "disassociation_imminent": false, "disassociation_timer": 0, "validity_period": 30, "neighbors": ["b6a7b9cbeebabf5900008064090603026a00"], "abridged": 1 }'`
-
-
-## config_add
-Dynamically load a BSS configuration from a file. This is used by netifd's mac80211 support script to configure BSSes on multiple PHYs in a single hostapd instance.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| iface | string | yes | WiFi interface name |
-| config | string | yes | path to hostapd config file |
-
-
-## config_remove
-Dynamically remove a BSS configuration.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| iface | string | yes | WiFi interface name |
-
-
-## del_client
-Kick a client off the network.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| addr | string | yes | client MAC address |
-| reason | int32 | no | 802.11 reason code |
-| deauth | bool | no | deauthenticates client instead of disassociating |
-| ban_time | int32 | no | ban client for N milliseconds |
-
-### example
-`ubus call hostapd.wl5-fb del_client '{ "addr": "68:2f:67:8b:98:ed", "reason": 5, "deauth": true, "ban_time": 10000 }'`
-
-
-## get_clients
-Show associated clients.
-
-### example
-`ubus call hostapd.wl5-fb get_clients`
-
-### output
-```json
-{
-        "freq": 5260,
-        "clients": {
-                "68:2f:67:8b:98:ed": {
-                        "auth": true,
-                        "assoc": true,
-                        "authorized": true,
-                        "preauth": false,
-                        "wds": false,
-                        "wmm": true,
-                        "ht": true,
-                        "vht": true,
-                        "he": false,
-                        "wps": false,
-                        "mfp": true,
-                        "rrm": [
-                                0,
-                                0,
-                                0,
-                                0,
-                                0
-                        ],
-                        "extended_capabilities": [
-                                0,
-                                0,
-                                0,
-                                0,
-                                0,
-                                0,
-                                0,
-                                64
-                        ],
-                        "aid": 3,
-                        "signature": "wifi4|probe:0,1,45,127,107,191,221(0017f2,10),221(001018,2),htcap:006f,htagg:1b,htmcs:0000ffff,vhtcap:0f825832,vhtrxmcs:0000ffea,vhttxmcs:0000ffea,extcap:0000008000000040|assoc:0,1,33,36,48,45,127,191,221(0017f2,10),221(001018,2),221(0050f2,2),htcap:006f,htagg:1b,htmcs:0000ffff,vhtcap:0f825832,vhtrxmcs:0000ffea,vhttxmcs:0000ffea,txpow:14f9,extcap:0000000000000040",
-                        "bytes": {
-                                "rx": 1933667,
-                                "tx": 746805
-                        },
-                        "airtime": {
-                                "rx": 208863,
-                                "tx": 9037883
-                        },
-                        "packets": {
-                                "rx": 3587,
-                                "tx": 2185
-                        },
-                        "rate": {
-                                "rx": 866700,
-                                "tx": 866700
-                        },
-                        "signal": -50,
-                        "capabilities": {
-                                "vht": {
-                                        "su_beamformee": true,
-                                        "mu_beamformee": false,
-                                        "mcs_map": {
-                                                "rx": {
-                                                        "1ss": 9,
-                                                        "2ss": 9,
-                                                        "3ss": 9,
-                                                        "4ss": -1,
-                                                        "5ss": -1,
-                                                        "6ss": -1,
-                                                        "7ss": -1,
-                                                        "8ss": -1
-                                                },
-                                                "tx": {
-                                                        "1ss": 9,
-                                                        "2ss": 9,
-                                                        "3ss": 9,
-                                                        "4ss": -1,
-                                                        "5ss": -1,
-                                                        "6ss": -1,
-                                                        "7ss": -1,
-                                                        "8ss": -1
-                                                }
-                                        }
-                                }
-                        }
-                }
-        }
-}
-```
-
-
-## get_features
-Show HT/VHT support.
-
-### example
-`ubus call hostapd.wl5-fb get_features`
-
-### output
-```json
-{
-        "ht_supported": true,
-        "vht_supported": true
-}
-```
-
-
-## get_status
-Get BSS status.
-
-### example
-`ubus call hostapd.wl5-fb get_status`
-
-### output
-```json
-{
-        "status": "ENABLED",
-        "bssid": "b6:a7:b9:cb:ee:bc",
-        "ssid": "fb",
-        "freq": 5260,
-        "channel": 52,
-        "op_class": 128,
-        "beacon_interval": 100,
-        "phy": "wl5-lan",
-        "rrm": {
-                "neighbor_report_tx": 0
-        },
-        "wnm": {
-                "bss_transition_query_rx": 0,
-                "bss_transition_request_tx": 0,
-                "bss_transition_response_rx": 0
-        },
-        "airtime": {
-                "time": 259561738,
-                "time_busy": 2844249,
-                "utilization": 0
-        },
-        "dfs": {
-                "cac_seconds": 60,
-                "cac_active": false,
-                "cac_seconds_left": 0
-        }
-}
-```
-
-
-## link_measurement_req
-Initiate an 802.11k Link Measurement Request.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| addr | string | yes | client MAC address |
-| tx-power-used | int32 | no | transmit power used to transmit the Link Measurement Request frame |
-| tx-power-max | int32 | no | upper limit of transmit power to be used by the client |
-
-
-## list_bans
-List banned clients.
-
-### example
-`ubus call hostapd.wl5-fb list_bans`
-
-### output
-```json
-{
-        "clients": [
-                "68:2f:67:8b:98:ed"
-        ]
-}
-```
-
-
-## notify_response
-When enabled, hostapd will send a ubus notification and wait for a response before responding to various requests. This is used by e.g. usteer to make it possible to ignore probe requests.
-
-:warning: enabling this will cause hostapd to stop responding to probe requests unless a ubus subscriber responds to the ubus notifications.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| notify_response | int32 | yes | disable (0) or enable (!0) |
-
-### example
-`ubus call hostapd.wl5-fb notify_response '{ "notify_response": 1 }'`
-
-## reload
-Reload BSS configuration.
-
-:warning: this can cause problems for certain configurations:
-
-```
-Mon May 16 16:09:08 2022 daemon.warn hostapd: Failed to check if DFS is required; ret=-1
-Mon May 16 16:09:08 2022 daemon.warn hostapd: Failed to check if DFS is required; ret=-1
-Mon May 16 16:09:08 2022 daemon.err hostapd: Wrong coupling between HT and VHT/HE channel setting
-```
-
-### example
-`ubus call hostapd.wl5-fb reload`
-
-
-## rrm_beacon_req
-Send a Beacon Measurement Request to a client.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| addr | string | yes | client MAC address |
-| op_class | int32 | yes | the Regulatory Class for which this Measurement Request applies |
-| channel | int32 | yes | channel to measure |
-| duration | int32 | yes | compile Beacon Measurement Report after N TU |
-| mode | int32 | yes | mode to be used for measurement (0: passive, 1: active, 2: beacon table) |
-| bssid | string | no | filter BSSes in Beacon Measurement Report by BSSID |
-| ssid | string | no | filter BSSes in Beacon Measurement Report by SSID|
-
-
-## rrm_nr_get_own
-Show Neighbor Report Element for this BSS.
-
-### example
-`ubus call hostapd.wl5-fb rrm_nr_get_own`
-
-### output
-```json
-{
-        "value": [
-                "b6:a7:b9:cb:ee:bc",
-                "fb",
-                "b6a7b9cbeebcaf5900008095090603029b00"
-        ]
-}
-```
-
-
-## rrm_nr_list
-Show Neighbor Report Elements for other BSSes in this ESS.
-
-### example
-`ubus call hostapd.wl5-fb rrm_nr_list`
-
-### output
-```json
-{
-        "list": [
-                [
-                        "b6:a7:b9:cb:ee:ba",
-                        "fb",
-                        "b6a7b9cbeebabf5900008064090603026a00"
-                ]
-        ]
-}
-```
-
-## rrm_nr_set
-Set the Neighbor Report Elements. An element for the node on which this command is executed will always be added.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| list | array | yes | array of Neighbor Report Elements in the format of the rrm_nr_list output |
-
-### example
-`ubus call hostapd.wl5-fb rrm_nr_set '{ "list": [ [ "b6:a7:b9:cb:ee:ba", "fb", "b6a7b9cbeebabf5900008064090603026a00" ] ] }'`
-
-
-## set_vendor_elements
-Configure Vendor-specific Information Elements for BSS.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| vendor_elements | string | yes | Vendor-specific Information Elements as hex string |
-
-### example
-`ubus call hostapd.wl5-fb set_vendor_elements '{ "vendor_elements": "dd054857dd6662" }'`
-
-
-## switch_chan
-Initiate a channel switch.
-
-:warning: trying to switch to the channel that is currently in use will fail: `Command failed: Operation not supported`
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| freq | int32 | yes | frequency in MHz to switch to |
-| bcn_count | int32 | no | count in Beacon frames (TBTT) to perform the switch |
-| center_freq1 | int32 | no | segment 0 center frequency in MHz (valid for HT and VHT) |
-| center_freq2 | int32 | no | segment 1 center frequency in MHz (valid only for 80 MHz channel width and an 80+80 channel) |
-| bandwidth | int32 | no | channel width to use |
-| sec_channel_offset| int32 | no | secondary channel offset for HT40 (0 = disabled, 1 = HT40+, -1 = HT40-) |
-| ht | bool | no | enable 802.11n |
-| vht | bool | no | enable 802.11ac |
-| he | bool | no | enable 802.11ax |
-| block_tx | bool | no | block transmission during CSA period |
-| csa_force | bool | no | restart the interface in case the CSA fails |
-
-## example
-`ubus call hostapd.wl5-fb switch_chan '{ "freq": 5180, "bcn_count": 10, "center_freq1": 5210, "bandwidth": 80, "he": 1, "block_tx": 1, "csa_force": 0 }'`
-
-
-## update_airtime
-Set dynamic airtime weight for client.
-
-### arguments
-| Name | Type | Required | Description |
-|---|---|---|---|
-| sta | string | yes | client MAC address |
-| weight | int32 | yes | airtime weight |
-
-
-## update_beacon
-Force beacon frame content to be updated and to start beaconing on an interface that uses start_disabled=1.
-
-### example
-`ubus call hostapd.wl5-fb update_beacon`
-
-
-## wps_status
-Get WPS status for BSS.
-
-### example
-`ubus call hostapd.wl5-fb wps_status`
-
-### output
-```json
-{
-        "pbc_status": "Disabled",
-        "last_wps_result": "None"
-}
-```
-
-
-## wps_cancel
-Cancel WPS Push Button Configuration.
-
-### example
-`ubus call hostapd.wl5-fb wps_cancel`
-
-
-## wps_start
-Start WPS Push Button Configuration.
-
-### example
-`ubus call hostapd.wl5-fb wps_start`

feeds/hostapd/hostapd/files/dhcp-get-server.sh

@@ -1,2 +0,0 @@
-#!/bin/sh
-[ "$1" = bound ] && echo "$serverid"

feeds/hostapd/hostapd/files/hostapd-basic.config

@@ -1,404 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-#CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# QCA vendor extensions to nl80211
-#CONFIG_DRIVER_NL80211_QCA=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-#CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-#CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# IEEE 802.11w (management frame protection)
-#CONFIG_IEEE80211W=y
-
-# Support Operating Channel Validation
-CONFIG_OCV=y
-
-# Integrated EAP server
-#CONFIG_EAP=y
-
-# EAP Re-authentication Protocol (ERP) in integrated EAP server
-#CONFIG_ERP=y
-
-# EAP-MD5 for the integrated EAP server
-#CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-#CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-#CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-#CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-#CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-#CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd for the integrated EAP server (secure authentication with a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-#CONFIG_EAP_FAST=y
-
-# EAP-TEAP for the integrated EAP server
-# Note: The current EAP-TEAP implementation is experimental and should not be
-# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
-# of conflicting statements and missing details and the implementation has
-# vendor specific workarounds for those and as such, may not interoperate with
-# any other implementation. This should not be used for anything else than
-# experimentation and interoperability testing until those issues has been
-# resolved.
-#CONFIG_EAP_TEAP=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# EAP-EKE for the integrated EAP server
-#CONFIG_EAP_EKE=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-#CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-#CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-#CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
-
-# IEEE 802.11ac (Very High Throughput) support
-CONFIG_IEEE80211AC=y
-
-# IEEE 802.11ax HE support
-# Note: This is experimental and work in progress. The definitions are still
-# subject to change and this should not be expected to interoperate with the
-# final IEEE 802.11ax version.
-#CONFIG_IEEE80211AX=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Add support for writing debug log to a file: -f /tmp/hostapd.log
-# Disabled by default.
-#CONFIG_DEBUG_FILE=y
-
-# Send debug messages to syslog instead of stdout
-CONFIG_DEBUG_SYSLOG=y
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Remove support for RADIUS accounting
-CONFIG_NO_ACCOUNTING=y
-
-# Remove support for RADIUS
-CONFIG_NO_RADIUS=y
-
-# Remove support for VLANs
-#CONFIG_NO_VLAN=y
-
-# Enable support for fully dynamic VLANs. This enables hostapd to
-# automatically create bridge and VLAN interfaces if necessary.
-#CONFIG_FULL_DYNAMIC_VLAN=y
-
-# Use netlink-based kernel API for VLAN operations instead of ioctl()
-# Note: This requires libnl 3.1 or newer.
-#CONFIG_VLAN_NETLINK=y
-
-# Remove support for dumping internal state through control interface commands
-# This can be used to reduce binary size at the cost of disabling a debugging
-# option.
-CONFIG_NO_DUMP_STATE=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, comment out these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, comment out these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-# hostapd depends on strong random number generation being available from the
-# operating system. os_get_random() function is used to fetch random data when
-# needed, e.g., for key generation. On Linux and BSD systems, this works by
-# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
-# properly initialized before hostapd is started. This is important especially
-# on embedded devices that do not have a hardware random number generator and
-# may by default start up with minimal entropy available for random number
-# generation.
-#
-# As a safety net, hostapd is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data
-# fetched from the OS. This by itself is not considered to be very strong, but
-# it may help in cases where the system pool is not initialized properly.
-# However, it is very strongly recommended that the system pool is initialized
-# with enough entropy either by using hardware assisted random number
-# generator or by storing state over device reboots.
-#
-# hostapd can be configured to maintain its own entropy store over restarts to
-# enhance random number generation. This is not perfect, but it is much more
-# secure than using the same sequence of random numbers after every reboot.
-# This can be enabled with -e<entropy file> command line option. The specified
-# file needs to be readable and writable by hostapd.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal hostapd random pool can be disabled.
-# This will save some in binary size and CPU use. However, this should only be
-# considered for builds that are known to be used on devices that meet the
-# requirements described above.
-CONFIG_NO_RANDOM_POOL=y
-
-# Should we attempt to use the getrandom(2) call that provides more reliable
-# yet secure randomness source than /dev/random on Linux 3.17 and newer.
-# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
-CONFIG_GETRANDOM=y
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Should we use epoll instead of select? Select is used by default.
-CONFIG_ELOOP_EPOLL=y
-
-# Should we use kqueue instead of select? Select is used by default.
-#CONFIG_ELOOP_KQUEUE=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used.
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms.
-#CONFIG_TLSV12=y
-
-# Select which ciphers to use by default with OpenSSL if the user does not
-# specify them.
-#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-#CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks.
-#CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-#CONFIG_HS20=y
-
-# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
-#CONFIG_SQLITE=y
-
-# Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
-
-# Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
-
-# Testing options
-# This can be used to enable some testing options (see also the example
-# configuration file) that are really useful only for testing clients that
-# connect to this hostapd. These options allow, for example, to drop a
-# certain percentage of probe requests or auth/(re)assoc frames.
-#
-#CONFIG_TESTING_OPTIONS=y
-
-# Automatic Channel Selection
-# This will allow hostapd to pick the channel automatically when channel is set
-# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
-# similar way.
-#
-# Automatic selection is currently only done through initialization, later on
-# we hope to do background checks to keep us moving to more ideal channels as
-# time goes by. ACS is currently only supported through the nl80211 driver and
-# your driver must have survey dump capability that is filled by the driver
-# during scanning.
-#
-# You can customize the ACS survey algorithm with the hostapd.conf variable
-# acs_num_scans.
-#
-# Supported ACS drivers:
-# * ath9k
-# * ath5k
-# * ath10k
-#
-# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
-#
-#CONFIG_ACS=y
-
-# Multiband Operation support
-# These extentions facilitate efficient use of multiple frequency bands
-# available to the AP and the devices that may associate with it.
-#CONFIG_MBO=y
-
-# Client Taxonomy
-# Has the AP retain the Probe Request and (Re)Association Request frames from
-# a client, from which a signature can be produced which can identify the model
-# of client device like "Nexus 6P" or "iPhone 5s".
-#CONFIG_TAXONOMY=y
-
-# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
-#CONFIG_FILS=y
-# FILS shared key authentication with PFS
-#CONFIG_FILS_SK_PFS=y
-
-# Include internal line edit mode in hostapd_cli. This can be used to provide
-# limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Opportunistic Wireless Encryption (OWE)
-# Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
-
-# Airtime policy support
-CONFIG_AIRTIME_POLICY=y
-
-# Proxy ARP support
-#CONFIG_PROXYARP=y
-
-# Override default value for the wpa_disable_eapol_key_retries configuration
-# parameter. See that parameter in hostapd.conf for more details.
-#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
-
-# uBus IPC/RPC System
-# Services can connect to the bus and provide methods
-# that can be called by other services or clients.
-CONFIG_UBUS=y
-
-# OpenWrt patch 380-disable-ctrl-iface-mib.patch
-# leads to the MIB only being compiled in if
-# CONFIG_CTRL_IFACE_MIB is enabled.
-#CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/hostapd-full.config

@@ -1,404 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-#CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# QCA vendor extensions to nl80211
-#CONFIG_DRIVER_NL80211_QCA=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-#CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# IEEE 802.11w (management frame protection)
-#CONFIG_IEEE80211W=y
-
-# Support Operating Channel Validation
-CONFIG_OCV=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP Re-authentication Protocol (ERP) in integrated EAP server
-CONFIG_ERP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-CONFIG_EAP_PSK=y
-
-# EAP-pwd for the integrated EAP server (secure authentication with a password)
-CONFIG_EAP_PWD=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-CONFIG_EAP_FAST=y
-
-# EAP-TEAP for the integrated EAP server
-# Note: The current EAP-TEAP implementation is experimental and should not be
-# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
-# of conflicting statements and missing details and the implementation has
-# vendor specific workarounds for those and as such, may not interoperate with
-# any other implementation. This should not be used for anything else than
-# experimentation and interoperability testing until those issues has been
-# resolved.
-#CONFIG_EAP_TEAP=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# EAP-EKE for the integrated EAP server
-#CONFIG_EAP_EKE=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-CONFIG_WNM=y
-
-# IEEE 802.11ac (Very High Throughput) support
-CONFIG_IEEE80211AC=y
-
-# IEEE 802.11ax HE support
-# Note: This is experimental and work in progress. The definitions are still
-# subject to change and this should not be expected to interoperate with the
-# final IEEE 802.11ax version.
-#CONFIG_IEEE80211AX=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Add support for writing debug log to a file: -f /tmp/hostapd.log
-# Disabled by default.
-#CONFIG_DEBUG_FILE=y
-
-# Send debug messages to syslog instead of stdout
-CONFIG_DEBUG_SYSLOG=y
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Remove support for RADIUS accounting
-#CONFIG_NO_ACCOUNTING=y
-
-# Remove support for RADIUS
-#CONFIG_NO_RADIUS=y
-
-# Remove support for VLANs
-#CONFIG_NO_VLAN=y
-
-# Enable support for fully dynamic VLANs. This enables hostapd to
-# automatically create bridge and VLAN interfaces if necessary.
-CONFIG_FULL_DYNAMIC_VLAN=y
-
-# Use netlink-based kernel API for VLAN operations instead of ioctl()
-# Note: This requires libnl 3.1 or newer.
-#CONFIG_VLAN_NETLINK=y
-
-# Remove support for dumping internal state through control interface commands
-# This can be used to reduce binary size at the cost of disabling a debugging
-# option.
-CONFIG_NO_DUMP_STATE=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, comment out these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, comment out these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-# hostapd depends on strong random number generation being available from the
-# operating system. os_get_random() function is used to fetch random data when
-# needed, e.g., for key generation. On Linux and BSD systems, this works by
-# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
-# properly initialized before hostapd is started. This is important especially
-# on embedded devices that do not have a hardware random number generator and
-# may by default start up with minimal entropy available for random number
-# generation.
-#
-# As a safety net, hostapd is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data
-# fetched from the OS. This by itself is not considered to be very strong, but
-# it may help in cases where the system pool is not initialized properly.
-# However, it is very strongly recommended that the system pool is initialized
-# with enough entropy either by using hardware assisted random number
-# generator or by storing state over device reboots.
-#
-# hostapd can be configured to maintain its own entropy store over restarts to
-# enhance random number generation. This is not perfect, but it is much more
-# secure than using the same sequence of random numbers after every reboot.
-# This can be enabled with -e<entropy file> command line option. The specified
-# file needs to be readable and writable by hostapd.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal hostapd random pool can be disabled.
-# This will save some in binary size and CPU use. However, this should only be
-# considered for builds that are known to be used on devices that meet the
-# requirements described above.
-CONFIG_NO_RANDOM_POOL=y
-
-# Should we attempt to use the getrandom(2) call that provides more reliable
-# yet secure randomness source than /dev/random on Linux 3.17 and newer.
-# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
-CONFIG_GETRANDOM=y
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Should we use epoll instead of select? Select is used by default.
-CONFIG_ELOOP_EPOLL=y
-
-# Should we use kqueue instead of select? Select is used by default.
-#CONFIG_ELOOP_KQUEUE=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used.
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms.
-#CONFIG_TLSV12=y
-
-# Select which ciphers to use by default with OpenSSL if the user does not
-# specify them.
-#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks.
-CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-CONFIG_HS20=y
-
-# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
-#CONFIG_SQLITE=y
-
-# Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
-
-# Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
-
-# Testing options
-# This can be used to enable some testing options (see also the example
-# configuration file) that are really useful only for testing clients that
-# connect to this hostapd. These options allow, for example, to drop a
-# certain percentage of probe requests or auth/(re)assoc frames.
-#
-#CONFIG_TESTING_OPTIONS=y
-
-# Automatic Channel Selection
-# This will allow hostapd to pick the channel automatically when channel is set
-# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
-# similar way.
-#
-# Automatic selection is currently only done through initialization, later on
-# we hope to do background checks to keep us moving to more ideal channels as
-# time goes by. ACS is currently only supported through the nl80211 driver and
-# your driver must have survey dump capability that is filled by the driver
-# during scanning.
-#
-# You can customize the ACS survey algorithm with the hostapd.conf variable
-# acs_num_scans.
-#
-# Supported ACS drivers:
-# * ath9k
-# * ath5k
-# * ath10k
-#
-# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
-#
-#CONFIG_ACS=y
-
-# Multiband Operation support
-# These extentions facilitate efficient use of multiple frequency bands
-# available to the AP and the devices that may associate with it.
-#CONFIG_MBO=y
-
-# Client Taxonomy
-# Has the AP retain the Probe Request and (Re)Association Request frames from
-# a client, from which a signature can be produced which can identify the model
-# of client device like "Nexus 6P" or "iPhone 5s".
-CONFIG_TAXONOMY=y
-
-# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
-#CONFIG_FILS=y
-# FILS shared key authentication with PFS
-#CONFIG_FILS_SK_PFS=y
-
-# Include internal line edit mode in hostapd_cli. This can be used to provide
-# limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Opportunistic Wireless Encryption (OWE)
-# Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
-
-# Airtime policy support
-CONFIG_AIRTIME_POLICY=y
-
-# Proxy ARP support
-CONFIG_PROXYARP=y
-
-# Override default value for the wpa_disable_eapol_key_retries configuration
-# parameter. See that parameter in hostapd.conf for more details.
-#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
-
-# uBus IPC/RPC System
-# Services can connect to the bus and provide methods
-# that can be called by other services or clients.
-CONFIG_UBUS=y
-
-# OpenWrt patch 380-disable-ctrl-iface-mib.patch
-# leads to the MIB only being compiled in if
-# CONFIG_CTRL_IFACE_MIB is enabled.
-CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/hostapd-mini.config

@@ -1,404 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-#CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# QCA vendor extensions to nl80211
-#CONFIG_DRIVER_NL80211_QCA=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-#CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-#CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# IEEE 802.11w (management frame protection)
-#CONFIG_IEEE80211W=y
-
-# Support Operating Channel Validation
-#CONFIG_OCV=y
-
-# Integrated EAP server
-#CONFIG_EAP=y
-
-# EAP Re-authentication Protocol (ERP) in integrated EAP server
-#CONFIG_ERP=y
-
-# EAP-MD5 for the integrated EAP server
-#CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-#CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-#CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-#CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-#CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-#CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd for the integrated EAP server (secure authentication with a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-#CONFIG_EAP_FAST=y
-
-# EAP-TEAP for the integrated EAP server
-# Note: The current EAP-TEAP implementation is experimental and should not be
-# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
-# of conflicting statements and missing details and the implementation has
-# vendor specific workarounds for those and as such, may not interoperate with
-# any other implementation. This should not be used for anything else than
-# experimentation and interoperability testing until those issues has been
-# resolved.
-#CONFIG_EAP_TEAP=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# EAP-EKE for the integrated EAP server
-#CONFIG_EAP_EKE=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-#CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-#CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-#CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
-
-# IEEE 802.11ac (Very High Throughput) support
-CONFIG_IEEE80211AC=y
-
-# IEEE 802.11ax HE support
-# Note: This is experimental and work in progress. The definitions are still
-# subject to change and this should not be expected to interoperate with the
-# final IEEE 802.11ax version.
-#CONFIG_IEEE80211AX=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Add support for writing debug log to a file: -f /tmp/hostapd.log
-# Disabled by default.
-#CONFIG_DEBUG_FILE=y
-
-# Send debug messages to syslog instead of stdout
-CONFIG_DEBUG_SYSLOG=y
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Remove support for RADIUS accounting
-CONFIG_NO_ACCOUNTING=y
-
-# Remove support for RADIUS
-CONFIG_NO_RADIUS=y
-
-# Remove support for VLANs
-#CONFIG_NO_VLAN=y
-
-# Enable support for fully dynamic VLANs. This enables hostapd to
-# automatically create bridge and VLAN interfaces if necessary.
-#CONFIG_FULL_DYNAMIC_VLAN=y
-
-# Use netlink-based kernel API for VLAN operations instead of ioctl()
-# Note: This requires libnl 3.1 or newer.
-#CONFIG_VLAN_NETLINK=y
-
-# Remove support for dumping internal state through control interface commands
-# This can be used to reduce binary size at the cost of disabling a debugging
-# option.
-CONFIG_NO_DUMP_STATE=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, comment out these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, comment out these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-# hostapd depends on strong random number generation being available from the
-# operating system. os_get_random() function is used to fetch random data when
-# needed, e.g., for key generation. On Linux and BSD systems, this works by
-# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
-# properly initialized before hostapd is started. This is important especially
-# on embedded devices that do not have a hardware random number generator and
-# may by default start up with minimal entropy available for random number
-# generation.
-#
-# As a safety net, hostapd is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data
-# fetched from the OS. This by itself is not considered to be very strong, but
-# it may help in cases where the system pool is not initialized properly.
-# However, it is very strongly recommended that the system pool is initialized
-# with enough entropy either by using hardware assisted random number
-# generator or by storing state over device reboots.
-#
-# hostapd can be configured to maintain its own entropy store over restarts to
-# enhance random number generation. This is not perfect, but it is much more
-# secure than using the same sequence of random numbers after every reboot.
-# This can be enabled with -e<entropy file> command line option. The specified
-# file needs to be readable and writable by hostapd.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal hostapd random pool can be disabled.
-# This will save some in binary size and CPU use. However, this should only be
-# considered for builds that are known to be used on devices that meet the
-# requirements described above.
-CONFIG_NO_RANDOM_POOL=y
-
-# Should we attempt to use the getrandom(2) call that provides more reliable
-# yet secure randomness source than /dev/random on Linux 3.17 and newer.
-# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
-CONFIG_GETRANDOM=y
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Should we use epoll instead of select? Select is used by default.
-CONFIG_ELOOP_EPOLL=y
-
-# Should we use kqueue instead of select? Select is used by default.
-#CONFIG_ELOOP_KQUEUE=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used.
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms.
-#CONFIG_TLSV12=y
-
-# Select which ciphers to use by default with OpenSSL if the user does not
-# specify them.
-#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-#CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks.
-#CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-#CONFIG_HS20=y
-
-# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
-#CONFIG_SQLITE=y
-
-# Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
-
-# Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
-
-# Testing options
-# This can be used to enable some testing options (see also the example
-# configuration file) that are really useful only for testing clients that
-# connect to this hostapd. These options allow, for example, to drop a
-# certain percentage of probe requests or auth/(re)assoc frames.
-#
-#CONFIG_TESTING_OPTIONS=y
-
-# Automatic Channel Selection
-# This will allow hostapd to pick the channel automatically when channel is set
-# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
-# similar way.
-#
-# Automatic selection is currently only done through initialization, later on
-# we hope to do background checks to keep us moving to more ideal channels as
-# time goes by. ACS is currently only supported through the nl80211 driver and
-# your driver must have survey dump capability that is filled by the driver
-# during scanning.
-#
-# You can customize the ACS survey algorithm with the hostapd.conf variable
-# acs_num_scans.
-#
-# Supported ACS drivers:
-# * ath9k
-# * ath5k
-# * ath10k
-#
-# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
-#
-#CONFIG_ACS=y
-
-# Multiband Operation support
-# These extentions facilitate efficient use of multiple frequency bands
-# available to the AP and the devices that may associate with it.
-#CONFIG_MBO=y
-
-# Client Taxonomy
-# Has the AP retain the Probe Request and (Re)Association Request frames from
-# a client, from which a signature can be produced which can identify the model
-# of client device like "Nexus 6P" or "iPhone 5s".
-#CONFIG_TAXONOMY=y
-
-# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
-#CONFIG_FILS=y
-# FILS shared key authentication with PFS
-#CONFIG_FILS_SK_PFS=y
-
-# Include internal line edit mode in hostapd_cli. This can be used to provide
-# limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Opportunistic Wireless Encryption (OWE)
-# Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
-
-# Airtime policy support
-#CONFIG_AIRTIME_POLICY=y
-
-# Proxy ARP support
-#CONFIG_PROXYARP=y
-
-# Override default value for the wpa_disable_eapol_key_retries configuration
-# parameter. See that parameter in hostapd.conf for more details.
-#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
-
-# uBus IPC/RPC System
-# Services can connect to the bus and provide methods
-# that can be called by other services or clients.
-CONFIG_UBUS=y
-
-# OpenWrt patch 380-disable-ctrl-iface-mib.patch
-# leads to the MIB only being compiled in if
-# CONFIG_CTRL_IFACE_MIB is enabled.
-#CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/radius.clients

@@ -1 +0,0 @@
-0.0.0.0/0 radius

feeds/hostapd/hostapd/files/radius.config

@@ -1,9 +0,0 @@
-config radius
-	option disabled '1'
-	option ca_cert '/etc/radius/ca.pem'
-	option cert '/etc/radius/cert.pem'
-	option key '/etc/radius/key.pem'
-	option users '/etc/radius/users'
-	option clients '/etc/radius/clients'
-	option auth_port '1812'
-	option acct_port '1813'

feeds/hostapd/hostapd/files/radius.init

@@ -1,42 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=30
-
-USE_PROCD=1
-NAME=radius
-
-radius_start() {
-	local cfg="$1"
-
-	config_get_bool disabled "$cfg" disabled 0
-
-	[ "$disabled" -gt 0 ] && return
-
-	config_get ca "$cfg" ca_cert
-	config_get key "$cfg" key
-	config_get cert "$cfg" cert
-	config_get users "$cfg" users
-	config_get clients "$cfg" clients
-	config_get auth_port "$cfg" auth_port 1812
-	config_get acct_port "$cfg" acct_port 1813
-	config_get identity "$cfg" identity "$(cat /proc/sys/kernel/hostname)"
-
-	procd_open_instance $cfg
-	procd_set_param command /usr/sbin/hostapd-radius \
-		-C "$ca" \
-		-c "$cert" -k "$key" \
-		-s "$clients" -u "$users" \
-		-p "$auth_port" -P "$acct_port" \
-		-i "$identity"
-	procd_close_instance
-}
-
-start_service() {
-	config_load radius
-	config_foreach radius_start radius
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "radius"
-}

feeds/hostapd/hostapd/files/radius.users

@@ -1,14 +0,0 @@
-{
-	"phase1": {
-		"wildcard": [
-			{
-				"name": "*",
-				"methods": [ "PEAP" ]
-			}
-		]
-	},
-	"phase2": {
-		"users": {
-		}
-	}
-}

feeds/hostapd/hostapd/files/wpa_supplicant-basic.config

@@ -1,625 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# wpa_supplicant binary. All lines starting with # are ignored. Configuration
-# option lines must be commented out complete, if they are not to be included,
-# i.e., just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Driver interface for generic Linux wireless extensions
-# Note: WEXT is deprecated in the current Linux kernel version and no new
-# functionality is added to it. nl80211-based interface is the new
-# replacement for WEXT and its use allows wpa_supplicant to properly control
-# the driver to improve existing functionality like roaming and to support new
-# functionality.
-#CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# QCA vendor extensions to nl80211
-#CONFIG_DRIVER_NL80211_QCA=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-#CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for MACsec capable Qualcomm Atheros drivers
-#CONFIG_DRIVER_MACSEC_QCA=y
-
-# Driver interface for Linux MACsec drivers
-#CONFIG_DRIVER_MACSEC_LINUX=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Driver interface for no driver (e.g., WPS ER only)
-#CONFIG_DRIVER_NONE=y
-
-# Solaris libraries
-#LIBS += -lsocket -ldlpi -lnsl
-#LIBS_c += -lsocket
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
-# MACsec is included)
-#CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-#CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-#CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-#CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-#CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-#CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-#CONFIG_EAP_FAST=y
-
-# EAP-TEAP
-# Note: The current EAP-TEAP implementation is experimental and should not be
-# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
-# of conflicting statements and missing details and the implementation has
-# vendor specific workarounds for those and as such, may not interoperate with
-# any other implementation. This should not be used for anything else than
-# experimentation and interoperability testing until those issues has been
-# resolved.
-#CONFIG_EAP_TEAP=y
-
-# EAP-GTC
-#CONFIG_EAP_GTC=y
-
-# EAP-OTP
-#CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# Enable SIM simulator (Milenage) for EAP-SIM
-#CONFIG_SIM_SIMULATOR=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd (secure authentication using only a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-#CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable WPS external registrar functionality
-#CONFIG_WPS_ER=y
-# Disable credentials for an open network by default when acting as a WPS
-# registrar.
-#CONFIG_WPS_REG_DISABLE_OPEN=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# EAP-EKE
-#CONFIG_EAP_EKE=y
-
-# MACsec
-#CONFIG_MACSEC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-#CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-#CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
-CONFIG_HT_OVERRIDES=y
-
-# Support VHT overrides (disable VHT, mask MCS rates, etc.)
-CONFIG_VHT_OVERRIDES=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# udp6 = UDP IPv6 sockets using localhost (::1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
-# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Include internal line edit mode in wpa_cli. This can be used as a replacement
-# for GNU Readline to provide limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Simultaneous Authentication of Equals (SAE), WPA3-Personal
-#CONFIG_SAE=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#	path is given on command line, not here; this option is just used to
-#	select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operating system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-#CONFIG_ELOOP=eloop
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Should we use epoll instead of select? Select is used by default.
-CONFIG_ELOOP_EPOLL=y
-
-# Should we use kqueue instead of select? Select is used by default.
-#CONFIG_ELOOP_KQUEUE=y
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# Disable Linux packet socket workaround applicable for station interface
-# in a bridge for EAPOL frames. This should be uncommented only if the kernel
-# is known to not have the regression issue in packet socket behavior with
-# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
-CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
-
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Support Operating Channel Validation
-CONFIG_OCV=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used. It should be noted that some existing TLS v1.0 -based
-# implementation may not be compatible with TLS v1.1 message (ClientHello is
-# sent prior to negotiating which version will be used)
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms. It should be
-# noted that some existing TLS v1.0 -based implementation may not be compatible
-# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
-# will be used)
-#CONFIG_TLSV12=y
-
-# Select which ciphers to use by default with OpenSSL if the user does not
-# specify them.
-#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-#CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
-#CONFIG_CTRL_IFACE_DBUS_NEW=y
-
-# Add introspection support for new DBus control interface
-#CONFIG_CTRL_IFACE_DBUS_INTRO=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
-CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-#CONFIG_DEBUG_FILE=y
-
-# Send debug messages to syslog instead of stdout
-CONFIG_DEBUG_SYSLOG=y
-# Set syslog facility for debug messages
-CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Add support for writing debug log to Android logcat instead of standard
-# output
-#CONFIG_ANDROID_LOG=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, uncomment these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, uncomment these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-# wpa_supplicant depends on strong random number generation being available
-# from the operating system. os_get_random() function is used to fetch random
-# data when needed, e.g., for key generation. On Linux and BSD systems, this
-# works by reading /dev/urandom. It should be noted that the OS entropy pool
-# needs to be properly initialized before wpa_supplicant is started. This is
-# important especially on embedded devices that do not have a hardware random
-# number generator and may by default start up with minimal entropy available
-# for random number generation.
-#
-# As a safety net, wpa_supplicant is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data fetched
-# from the OS. This by itself is not considered to be very strong, but it may
-# help in cases where the system pool is not initialized properly. However, it
-# is very strongly recommended that the system pool is initialized with enough
-# entropy either by using hardware assisted random number generator or by
-# storing state over device reboots.
-#
-# wpa_supplicant can be configured to maintain its own entropy store over
-# restarts to enhance random number generation. This is not perfect, but it is
-# much more secure than using the same sequence of random numbers after every
-# reboot. This can be enabled with -e<entropy file> command line option. The
-# specified file needs to be readable and writable by wpa_supplicant.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal wpa_supplicant random pool can be
-# disabled. This will save some in binary size and CPU use. However, this
-# should only be considered for builds that are known to be used on devices
-# that meet the requirements described above.
-CONFIG_NO_RANDOM_POOL=y
-
-# Should we attempt to use the getrandom(2) call that provides more reliable
-# yet secure randomness source than /dev/random on Linux 3.17 and newer.
-# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
-CONFIG_GETRANDOM=y
-
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-#CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
-#CONFIG_IEEE80211AC=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks (GAS/ANQP to learn more about the networks and network
-# selection based on available credentials).
-#CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-#CONFIG_HS20=y
-
-# Enable interface matching in wpa_supplicant
-#CONFIG_MATCH_IFACE=y
-
-# Disable roaming in wpa_supplicant
-#CONFIG_NO_ROAMING=y
-
-# AP mode operations with wpa_supplicant
-# This can be used for controlling AP mode operations with wpa_supplicant. It
-# should be noted that this is mainly aimed at simple cases like
-# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
-# external RADIUS server can be supported with hostapd.
-#CONFIG_AP=y
-
-# P2P (Wi-Fi Direct)
-# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
-# more information on P2P operations.
-#CONFIG_P2P=y
-
-# Enable TDLS support
-#CONFIG_TDLS=y
-
-# Wi-Fi Display
-# This can be used to enable Wi-Fi Display extensions for P2P using an external
-# program to control the additional information exchanges in the messages.
-#CONFIG_WIFI_DISPLAY=y
-
-# Autoscan
-# This can be used to enable automatic scan support in wpa_supplicant.
-# See wpa_supplicant.conf for more information on autoscan usage.
-#
-# Enabling directly a module will enable autoscan support.
-# For exponential module:
-#CONFIG_AUTOSCAN_EXPONENTIAL=y
-# For periodic module:
-#CONFIG_AUTOSCAN_PERIODIC=y
-
-# Password (and passphrase, etc.) backend for external storage
-# These optional mechanisms can be used to add support for storing passwords
-# and other secrets in external (to wpa_supplicant) location. This allows, for
-# example, operating system specific key storage to be used
-#
-# External password backend for testing purposes (developer use)
-#CONFIG_EXT_PASSWORD_TEST=y
-
-# Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
-
-# Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
-
-# OS X builds. This is only for building eapol_test.
-#CONFIG_OSX=y
-
-# Automatic Channel Selection
-# This will allow wpa_supplicant to pick the channel automatically when channel
-# is set to "0".
-#
-# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
-# to "channel=0". This would enable us to eventually add other ACS algorithms in
-# similar way.
-#
-# Automatic selection is currently only done through initialization, later on
-# we hope to do background checks to keep us moving to more ideal channels as
-# time goes by. ACS is currently only supported through the nl80211 driver and
-# your driver must have survey dump capability that is filled by the driver
-# during scanning.
-#
-# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
-# a newly to create wpa_supplicant.conf variable acs_num_scans.
-#
-# Supported ACS drivers:
-# * ath9k
-# * ath5k
-# * ath10k
-#
-# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
-#CONFIG_ACS=y
-
-# Support Multi Band Operation
-#CONFIG_MBO=y
-
-# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
-#CONFIG_FILS=y
-# FILS shared key authentication with PFS
-#CONFIG_FILS_SK_PFS=y
-
-# Support RSN on IBSS networks
-# This is needed to be able to use mode=1 network profile with proto=RSN and
-# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
-#CONFIG_IBSS_RSN=y
-
-# External PMKSA cache control
-# This can be used to enable control interface commands that allow the current
-# PMKSA cache entries to be fetched and new entries to be added.
-#CONFIG_PMKSA_CACHE_EXTERNAL=y
-
-# Mesh Networking (IEEE 802.11s)
-#CONFIG_MESH=y
-
-# Background scanning modules
-# These can be used to request wpa_supplicant to perform background scanning
-# operations for roaming within an ESS (same SSID). See the bgscan parameter in
-# the wpa_supplicant.conf file for more details.
-# Periodic background scans based on signal strength
-#CONFIG_BGSCAN_SIMPLE=y
-# Learn channels used by the network and try to avoid bgscans on other
-# channels (experimental)
-#CONFIG_BGSCAN_LEARN=y
-
-# Opportunistic Wireless Encryption (OWE)
-# Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
-
-# Device Provisioning Protocol (DPP)
-# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
-# wpa_supplicant/README-DPP for details)
-#CONFIG_DPP=y
-
-# uBus IPC/RPC System
-# Services can connect to the bus and provide methods
-# that can be called by other services or clients.
-CONFIG_UBUS=y
-
-# OpenWrt patch 380-disable-ctrl-iface-mib.patch
-# leads to the MIB only being compiled in if
-# CONFIG_CTRL_IFACE_MIB is enabled.
-#CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/wpa_supplicant-full.config

@@ -1,625 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# wpa_supplicant binary. All lines starting with # are ignored. Configuration
-# option lines must be commented out complete, if they are not to be included,
-# i.e., just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Driver interface for generic Linux wireless extensions
-# Note: WEXT is deprecated in the current Linux kernel version and no new
-# functionality is added to it. nl80211-based interface is the new
-# replacement for WEXT and its use allows wpa_supplicant to properly control
-# the driver to improve existing functionality like roaming and to support new
-# functionality.
-#CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# QCA vendor extensions to nl80211
-#CONFIG_DRIVER_NL80211_QCA=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-#CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for MACsec capable Qualcomm Atheros drivers
-#CONFIG_DRIVER_MACSEC_QCA=y
-
-# Driver interface for Linux MACsec drivers
-#CONFIG_DRIVER_MACSEC_LINUX=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Driver interface for no driver (e.g., WPS ER only)
-#CONFIG_DRIVER_NONE=y
-
-# Solaris libraries
-#LIBS += -lsocket -ldlpi -lnsl
-#LIBS_c += -lsocket
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
-# MACsec is included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-CONFIG_EAP_FAST=y
-
-# EAP-TEAP
-# Note: The current EAP-TEAP implementation is experimental and should not be
-# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
-# of conflicting statements and missing details and the implementation has
-# vendor specific workarounds for those and as such, may not interoperate with
-# any other implementation. This should not be used for anything else than
-# experimentation and interoperability testing until those issues has been
-# resolved.
-#CONFIG_EAP_TEAP=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# Enable SIM simulator (Milenage) for EAP-SIM
-#CONFIG_SIM_SIMULATOR=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd (secure authentication using only a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable WPS external registrar functionality
-#CONFIG_WPS_ER=y
-# Disable credentials for an open network by default when acting as a WPS
-# registrar.
-#CONFIG_WPS_REG_DISABLE_OPEN=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# EAP-EKE
-#CONFIG_EAP_EKE=y
-
-# MACsec
-#CONFIG_MACSEC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
-CONFIG_HT_OVERRIDES=y
-
-# Support VHT overrides (disable VHT, mask MCS rates, etc.)
-CONFIG_VHT_OVERRIDES=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# udp6 = UDP IPv6 sockets using localhost (::1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
-# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Include internal line edit mode in wpa_cli. This can be used as a replacement
-# for GNU Readline to provide limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Simultaneous Authentication of Equals (SAE), WPA3-Personal
-#CONFIG_SAE=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#	path is given on command line, not here; this option is just used to
-#	select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-#CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operating system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-#CONFIG_ELOOP=eloop
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Should we use epoll instead of select? Select is used by default.
-CONFIG_ELOOP_EPOLL=y
-
-# Should we use kqueue instead of select? Select is used by default.
-#CONFIG_ELOOP_KQUEUE=y
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# Disable Linux packet socket workaround applicable for station interface
-# in a bridge for EAPOL frames. This should be uncommented only if the kernel
-# is known to not have the regression issue in packet socket behavior with
-# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
-CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
-
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Support Operating Channel Validation
-CONFIG_OCV=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used. It should be noted that some existing TLS v1.0 -based
-# implementation may not be compatible with TLS v1.1 message (ClientHello is
-# sent prior to negotiating which version will be used)
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms. It should be
-# noted that some existing TLS v1.0 -based implementation may not be compatible
-# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
-# will be used)
-#CONFIG_TLSV12=y
-
-# Select which ciphers to use by default with OpenSSL if the user does not
-# specify them.
-#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
-#CONFIG_CTRL_IFACE_DBUS_NEW=y
-
-# Add introspection support for new DBus control interface
-#CONFIG_CTRL_IFACE_DBUS_INTRO=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
-CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-#CONFIG_DEBUG_FILE=y
-
-# Send debug messages to syslog instead of stdout
-CONFIG_DEBUG_SYSLOG=y
-# Set syslog facility for debug messages
-CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Add support for writing debug log to Android logcat instead of standard
-# output
-#CONFIG_ANDROID_LOG=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, uncomment these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, uncomment these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-# wpa_supplicant depends on strong random number generation being available
-# from the operating system. os_get_random() function is used to fetch random
-# data when needed, e.g., for key generation. On Linux and BSD systems, this
-# works by reading /dev/urandom. It should be noted that the OS entropy pool
-# needs to be properly initialized before wpa_supplicant is started. This is
-# important especially on embedded devices that do not have a hardware random
-# number generator and may by default start up with minimal entropy available
-# for random number generation.
-#
-# As a safety net, wpa_supplicant is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data fetched
-# from the OS. This by itself is not considered to be very strong, but it may
-# help in cases where the system pool is not initialized properly. However, it
-# is very strongly recommended that the system pool is initialized with enough
-# entropy either by using hardware assisted random number generator or by
-# storing state over device reboots.
-#
-# wpa_supplicant can be configured to maintain its own entropy store over
-# restarts to enhance random number generation. This is not perfect, but it is
-# much more secure than using the same sequence of random numbers after every
-# reboot. This can be enabled with -e<entropy file> command line option. The
-# specified file needs to be readable and writable by wpa_supplicant.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal wpa_supplicant random pool can be
-# disabled. This will save some in binary size and CPU use. However, this
-# should only be considered for builds that are known to be used on devices
-# that meet the requirements described above.
-CONFIG_NO_RANDOM_POOL=y
-
-# Should we attempt to use the getrandom(2) call that provides more reliable
-# yet secure randomness source than /dev/random on Linux 3.17 and newer.
-# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
-CONFIG_GETRANDOM=y
-
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-#CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
-#CONFIG_IEEE80211AC=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-CONFIG_WNM=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks (GAS/ANQP to learn more about the networks and network
-# selection based on available credentials).
-CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-CONFIG_HS20=y
-
-# Enable interface matching in wpa_supplicant
-#CONFIG_MATCH_IFACE=y
-
-# Disable roaming in wpa_supplicant
-#CONFIG_NO_ROAMING=y
-
-# AP mode operations with wpa_supplicant
-# This can be used for controlling AP mode operations with wpa_supplicant. It
-# should be noted that this is mainly aimed at simple cases like
-# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
-# external RADIUS server can be supported with hostapd.
-#CONFIG_AP=y
-
-# P2P (Wi-Fi Direct)
-# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
-# more information on P2P operations.
-#CONFIG_P2P=y
-
-# Enable TDLS support
-#CONFIG_TDLS=y
-
-# Wi-Fi Display
-# This can be used to enable Wi-Fi Display extensions for P2P using an external
-# program to control the additional information exchanges in the messages.
-#CONFIG_WIFI_DISPLAY=y
-
-# Autoscan
-# This can be used to enable automatic scan support in wpa_supplicant.
-# See wpa_supplicant.conf for more information on autoscan usage.
-#
-# Enabling directly a module will enable autoscan support.
-# For exponential module:
-#CONFIG_AUTOSCAN_EXPONENTIAL=y
-# For periodic module:
-#CONFIG_AUTOSCAN_PERIODIC=y
-
-# Password (and passphrase, etc.) backend for external storage
-# These optional mechanisms can be used to add support for storing passwords
-# and other secrets in external (to wpa_supplicant) location. This allows, for
-# example, operating system specific key storage to be used
-#
-# External password backend for testing purposes (developer use)
-#CONFIG_EXT_PASSWORD_TEST=y
-
-# Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
-
-# Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
-
-# OS X builds. This is only for building eapol_test.
-#CONFIG_OSX=y
-
-# Automatic Channel Selection
-# This will allow wpa_supplicant to pick the channel automatically when channel
-# is set to "0".
-#
-# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
-# to "channel=0". This would enable us to eventually add other ACS algorithms in
-# similar way.
-#
-# Automatic selection is currently only done through initialization, later on
-# we hope to do background checks to keep us moving to more ideal channels as
-# time goes by. ACS is currently only supported through the nl80211 driver and
-# your driver must have survey dump capability that is filled by the driver
-# during scanning.
-#
-# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
-# a newly to create wpa_supplicant.conf variable acs_num_scans.
-#
-# Supported ACS drivers:
-# * ath9k
-# * ath5k
-# * ath10k
-#
-# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
-#CONFIG_ACS=y
-
-# Support Multi Band Operation
-#CONFIG_MBO=y
-
-# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
-CONFIG_FILS=y
-# FILS shared key authentication with PFS
-#CONFIG_FILS_SK_PFS=y
-
-# Support RSN on IBSS networks
-# This is needed to be able to use mode=1 network profile with proto=RSN and
-# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
-CONFIG_IBSS_RSN=y
-
-# External PMKSA cache control
-# This can be used to enable control interface commands that allow the current
-# PMKSA cache entries to be fetched and new entries to be added.
-#CONFIG_PMKSA_CACHE_EXTERNAL=y
-
-# Mesh Networking (IEEE 802.11s)
-#CONFIG_MESH=y
-
-# Background scanning modules
-# These can be used to request wpa_supplicant to perform background scanning
-# operations for roaming within an ESS (same SSID). See the bgscan parameter in
-# the wpa_supplicant.conf file for more details.
-# Periodic background scans based on signal strength
-#CONFIG_BGSCAN_SIMPLE=y
-# Learn channels used by the network and try to avoid bgscans on other
-# channels (experimental)
-#CONFIG_BGSCAN_LEARN=y
-
-# Opportunistic Wireless Encryption (OWE)
-# Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
-
-# Device Provisioning Protocol (DPP)
-# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
-# wpa_supplicant/README-DPP for details)
-#CONFIG_DPP=y
-
-# uBus IPC/RPC System
-# Services can connect to the bus and provide methods
-# that can be called by other services or clients.
-CONFIG_UBUS=y
-
-# OpenWrt patch 380-disable-ctrl-iface-mib.patch
-# leads to the MIB only being compiled in if
-# CONFIG_CTRL_IFACE_MIB is enabled.
-CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/wpa_supplicant-mini.config

@@ -1,625 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# wpa_supplicant binary. All lines starting with # are ignored. Configuration
-# option lines must be commented out complete, if they are not to be included,
-# i.e., just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Driver interface for generic Linux wireless extensions
-# Note: WEXT is deprecated in the current Linux kernel version and no new
-# functionality is added to it. nl80211-based interface is the new
-# replacement for WEXT and its use allows wpa_supplicant to properly control
-# the driver to improve existing functionality like roaming and to support new
-# functionality.
-#CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# QCA vendor extensions to nl80211
-#CONFIG_DRIVER_NL80211_QCA=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-#CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for MACsec capable Qualcomm Atheros drivers
-#CONFIG_DRIVER_MACSEC_QCA=y
-
-# Driver interface for Linux MACsec drivers
-#CONFIG_DRIVER_MACSEC_LINUX=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Driver interface for no driver (e.g., WPS ER only)
-#CONFIG_DRIVER_NONE=y
-
-# Solaris libraries
-#LIBS += -lsocket -ldlpi -lnsl
-#LIBS_c += -lsocket
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
-# MACsec is included)
-#CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-#CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-#CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-#CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-#CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-#CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-#CONFIG_EAP_FAST=y
-
-# EAP-TEAP
-# Note: The current EAP-TEAP implementation is experimental and should not be
-# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
-# of conflicting statements and missing details and the implementation has
-# vendor specific workarounds for those and as such, may not interoperate with
-# any other implementation. This should not be used for anything else than
-# experimentation and interoperability testing until those issues has been
-# resolved.
-#CONFIG_EAP_TEAP=y
-
-# EAP-GTC
-#CONFIG_EAP_GTC=y
-
-# EAP-OTP
-#CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# Enable SIM simulator (Milenage) for EAP-SIM
-#CONFIG_SIM_SIMULATOR=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd (secure authentication using only a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-#CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable WPS external registrar functionality
-#CONFIG_WPS_ER=y
-# Disable credentials for an open network by default when acting as a WPS
-# registrar.
-#CONFIG_WPS_REG_DISABLE_OPEN=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# EAP-EKE
-#CONFIG_EAP_EKE=y
-
-# MACsec
-#CONFIG_MACSEC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-#CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-#CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
-CONFIG_HT_OVERRIDES=y
-
-# Support VHT overrides (disable VHT, mask MCS rates, etc.)
-CONFIG_VHT_OVERRIDES=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# udp6 = UDP IPv6 sockets using localhost (::1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
-# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Include internal line edit mode in wpa_cli. This can be used as a replacement
-# for GNU Readline to provide limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Simultaneous Authentication of Equals (SAE), WPA3-Personal
-#CONFIG_SAE=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#	path is given on command line, not here; this option is just used to
-#	select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operating system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-#CONFIG_ELOOP=eloop
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Should we use epoll instead of select? Select is used by default.
-CONFIG_ELOOP_EPOLL=y
-
-# Should we use kqueue instead of select? Select is used by default.
-#CONFIG_ELOOP_KQUEUE=y
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# Disable Linux packet socket workaround applicable for station interface
-# in a bridge for EAPOL frames. This should be uncommented only if the kernel
-# is known to not have the regression issue in packet socket behavior with
-# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
-CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
-
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Support Operating Channel Validation
-#CONFIG_OCV=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used. It should be noted that some existing TLS v1.0 -based
-# implementation may not be compatible with TLS v1.1 message (ClientHello is
-# sent prior to negotiating which version will be used)
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms. It should be
-# noted that some existing TLS v1.0 -based implementation may not be compatible
-# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
-# will be used)
-#CONFIG_TLSV12=y
-
-# Select which ciphers to use by default with OpenSSL if the user does not
-# specify them.
-#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-#CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
-#CONFIG_CTRL_IFACE_DBUS_NEW=y
-
-# Add introspection support for new DBus control interface
-#CONFIG_CTRL_IFACE_DBUS_INTRO=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-#CONFIG_DEBUG_FILE=y
-
-# Send debug messages to syslog instead of stdout
-CONFIG_DEBUG_SYSLOG=y
-# Set syslog facility for debug messages
-CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Add support for writing debug log to Android logcat instead of standard
-# output
-#CONFIG_ANDROID_LOG=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, uncomment these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, uncomment these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-# wpa_supplicant depends on strong random number generation being available
-# from the operating system. os_get_random() function is used to fetch random
-# data when needed, e.g., for key generation. On Linux and BSD systems, this
-# works by reading /dev/urandom. It should be noted that the OS entropy pool
-# needs to be properly initialized before wpa_supplicant is started. This is
-# important especially on embedded devices that do not have a hardware random
-# number generator and may by default start up with minimal entropy available
-# for random number generation.
-#
-# As a safety net, wpa_supplicant is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data fetched
-# from the OS. This by itself is not considered to be very strong, but it may
-# help in cases where the system pool is not initialized properly. However, it
-# is very strongly recommended that the system pool is initialized with enough
-# entropy either by using hardware assisted random number generator or by
-# storing state over device reboots.
-#
-# wpa_supplicant can be configured to maintain its own entropy store over
-# restarts to enhance random number generation. This is not perfect, but it is
-# much more secure than using the same sequence of random numbers after every
-# reboot. This can be enabled with -e<entropy file> command line option. The
-# specified file needs to be readable and writable by wpa_supplicant.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal wpa_supplicant random pool can be
-# disabled. This will save some in binary size and CPU use. However, this
-# should only be considered for builds that are known to be used on devices
-# that meet the requirements described above.
-CONFIG_NO_RANDOM_POOL=y
-
-# Should we attempt to use the getrandom(2) call that provides more reliable
-# yet secure randomness source than /dev/random on Linux 3.17 and newer.
-# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
-CONFIG_GETRANDOM=y
-
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-#CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
-#CONFIG_IEEE80211AC=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks (GAS/ANQP to learn more about the networks and network
-# selection based on available credentials).
-#CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-#CONFIG_HS20=y
-
-# Enable interface matching in wpa_supplicant
-#CONFIG_MATCH_IFACE=y
-
-# Disable roaming in wpa_supplicant
-#CONFIG_NO_ROAMING=y
-
-# AP mode operations with wpa_supplicant
-# This can be used for controlling AP mode operations with wpa_supplicant. It
-# should be noted that this is mainly aimed at simple cases like
-# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
-# external RADIUS server can be supported with hostapd.
-#CONFIG_AP=y
-
-# P2P (Wi-Fi Direct)
-# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
-# more information on P2P operations.
-#CONFIG_P2P=y
-
-# Enable TDLS support
-#CONFIG_TDLS=y
-
-# Wi-Fi Display
-# This can be used to enable Wi-Fi Display extensions for P2P using an external
-# program to control the additional information exchanges in the messages.
-#CONFIG_WIFI_DISPLAY=y
-
-# Autoscan
-# This can be used to enable automatic scan support in wpa_supplicant.
-# See wpa_supplicant.conf for more information on autoscan usage.
-#
-# Enabling directly a module will enable autoscan support.
-# For exponential module:
-#CONFIG_AUTOSCAN_EXPONENTIAL=y
-# For periodic module:
-#CONFIG_AUTOSCAN_PERIODIC=y
-
-# Password (and passphrase, etc.) backend for external storage
-# These optional mechanisms can be used to add support for storing passwords
-# and other secrets in external (to wpa_supplicant) location. This allows, for
-# example, operating system specific key storage to be used
-#
-# External password backend for testing purposes (developer use)
-#CONFIG_EXT_PASSWORD_TEST=y
-
-# Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
-
-# Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
-
-# OS X builds. This is only for building eapol_test.
-#CONFIG_OSX=y
-
-# Automatic Channel Selection
-# This will allow wpa_supplicant to pick the channel automatically when channel
-# is set to "0".
-#
-# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
-# to "channel=0". This would enable us to eventually add other ACS algorithms in
-# similar way.
-#
-# Automatic selection is currently only done through initialization, later on
-# we hope to do background checks to keep us moving to more ideal channels as
-# time goes by. ACS is currently only supported through the nl80211 driver and
-# your driver must have survey dump capability that is filled by the driver
-# during scanning.
-#
-# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
-# a newly to create wpa_supplicant.conf variable acs_num_scans.
-#
-# Supported ACS drivers:
-# * ath9k
-# * ath5k
-# * ath10k
-#
-# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
-#CONFIG_ACS=y
-
-# Support Multi Band Operation
-#CONFIG_MBO=y
-
-# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
-#CONFIG_FILS=y
-# FILS shared key authentication with PFS
-#CONFIG_FILS_SK_PFS=y
-
-# Support RSN on IBSS networks
-# This is needed to be able to use mode=1 network profile with proto=RSN and
-# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
-#CONFIG_IBSS_RSN=y
-
-# External PMKSA cache control
-# This can be used to enable control interface commands that allow the current
-# PMKSA cache entries to be fetched and new entries to be added.
-#CONFIG_PMKSA_CACHE_EXTERNAL=y
-
-# Mesh Networking (IEEE 802.11s)
-#CONFIG_MESH=y
-
-# Background scanning modules
-# These can be used to request wpa_supplicant to perform background scanning
-# operations for roaming within an ESS (same SSID). See the bgscan parameter in
-# the wpa_supplicant.conf file for more details.
-# Periodic background scans based on signal strength
-#CONFIG_BGSCAN_SIMPLE=y
-# Learn channels used by the network and try to avoid bgscans on other
-# channels (experimental)
-#CONFIG_BGSCAN_LEARN=y
-
-# Opportunistic Wireless Encryption (OWE)
-# Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
-
-# Device Provisioning Protocol (DPP)
-# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
-# wpa_supplicant/README-DPP for details)
-#CONFIG_DPP=y
-
-# uBus IPC/RPC System
-# Services can connect to the bus and provide methods
-# that can be called by other services or clients.
-CONFIG_UBUS=y
-
-# OpenWrt patch 380-disable-ctrl-iface-mib.patch
-# leads to the MIB only being compiled in if
-# CONFIG_CTRL_IFACE_MIB is enabled.
-#CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/wpa_supplicant-p2p.config

@@ -1,625 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# wpa_supplicant binary. All lines starting with # are ignored. Configuration
-# option lines must be commented out complete, if they are not to be included,
-# i.e., just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Driver interface for generic Linux wireless extensions
-# Note: WEXT is deprecated in the current Linux kernel version and no new
-# functionality is added to it. nl80211-based interface is the new
-# replacement for WEXT and its use allows wpa_supplicant to properly control
-# the driver to improve existing functionality like roaming and to support new
-# functionality.
-#CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# QCA vendor extensions to nl80211
-#CONFIG_DRIVER_NL80211_QCA=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-#CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for MACsec capable Qualcomm Atheros drivers
-#CONFIG_DRIVER_MACSEC_QCA=y
-
-# Driver interface for Linux MACsec drivers
-#CONFIG_DRIVER_MACSEC_LINUX=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Driver interface for no driver (e.g., WPS ER only)
-#CONFIG_DRIVER_NONE=y
-
-# Solaris libraries
-#LIBS += -lsocket -ldlpi -lnsl
-#LIBS_c += -lsocket
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
-# MACsec is included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-CONFIG_EAP_FAST=y
-
-# EAP-TEAP
-# Note: The current EAP-TEAP implementation is experimental and should not be
-# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
-# of conflicting statements and missing details and the implementation has
-# vendor specific workarounds for those and as such, may not interoperate with
-# any other implementation. This should not be used for anything else than
-# experimentation and interoperability testing until those issues has been
-# resolved.
-#CONFIG_EAP_TEAP=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# Enable SIM simulator (Milenage) for EAP-SIM
-#CONFIG_SIM_SIMULATOR=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd (secure authentication using only a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable WPS external registrar functionality
-#CONFIG_WPS_ER=y
-# Disable credentials for an open network by default when acting as a WPS
-# registrar.
-#CONFIG_WPS_REG_DISABLE_OPEN=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# EAP-EKE
-#CONFIG_EAP_EKE=y
-
-# MACsec
-#CONFIG_MACSEC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
-CONFIG_HT_OVERRIDES=y
-
-# Support VHT overrides (disable VHT, mask MCS rates, etc.)
-CONFIG_VHT_OVERRIDES=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# udp6 = UDP IPv6 sockets using localhost (::1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
-# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Include internal line edit mode in wpa_cli. This can be used as a replacement
-# for GNU Readline to provide limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Simultaneous Authentication of Equals (SAE), WPA3-Personal
-#CONFIG_SAE=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#	path is given on command line, not here; this option is just used to
-#	select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-#CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operating system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-#CONFIG_ELOOP=eloop
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Should we use epoll instead of select? Select is used by default.
-CONFIG_ELOOP_EPOLL=y
-
-# Should we use kqueue instead of select? Select is used by default.
-#CONFIG_ELOOP_KQUEUE=y
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# Disable Linux packet socket workaround applicable for station interface
-# in a bridge for EAPOL frames. This should be uncommented only if the kernel
-# is known to not have the regression issue in packet socket behavior with
-# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
-CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
-
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-CONFIG_IEEE80211W=y
-
-# Support Operating Channel Validation
-#CONFIG_OCV=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used. It should be noted that some existing TLS v1.0 -based
-# implementation may not be compatible with TLS v1.1 message (ClientHello is
-# sent prior to negotiating which version will be used)
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms. It should be
-# noted that some existing TLS v1.0 -based implementation may not be compatible
-# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
-# will be used)
-#CONFIG_TLSV12=y
-
-# Select which ciphers to use by default with OpenSSL if the user does not
-# specify them.
-#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
-#CONFIG_CTRL_IFACE_DBUS_NEW=y
-
-# Add introspection support for new DBus control interface
-#CONFIG_CTRL_IFACE_DBUS_INTRO=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-#CONFIG_DEBUG_FILE=y
-
-# Send debug messages to syslog instead of stdout
-CONFIG_DEBUG_SYSLOG=y
-# Set syslog facility for debug messages
-CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Add support for writing debug log to Android logcat instead of standard
-# output
-#CONFIG_ANDROID_LOG=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, uncomment these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, uncomment these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-# wpa_supplicant depends on strong random number generation being available
-# from the operating system. os_get_random() function is used to fetch random
-# data when needed, e.g., for key generation. On Linux and BSD systems, this
-# works by reading /dev/urandom. It should be noted that the OS entropy pool
-# needs to be properly initialized before wpa_supplicant is started. This is
-# important especially on embedded devices that do not have a hardware random
-# number generator and may by default start up with minimal entropy available
-# for random number generation.
-#
-# As a safety net, wpa_supplicant is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data fetched
-# from the OS. This by itself is not considered to be very strong, but it may
-# help in cases where the system pool is not initialized properly. However, it
-# is very strongly recommended that the system pool is initialized with enough
-# entropy either by using hardware assisted random number generator or by
-# storing state over device reboots.
-#
-# wpa_supplicant can be configured to maintain its own entropy store over
-# restarts to enhance random number generation. This is not perfect, but it is
-# much more secure than using the same sequence of random numbers after every
-# reboot. This can be enabled with -e<entropy file> command line option. The
-# specified file needs to be readable and writable by wpa_supplicant.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal wpa_supplicant random pool can be
-# disabled. This will save some in binary size and CPU use. However, this
-# should only be considered for builds that are known to be used on devices
-# that meet the requirements described above.
-CONFIG_NO_RANDOM_POOL=y
-
-# Should we attempt to use the getrandom(2) call that provides more reliable
-# yet secure randomness source than /dev/random on Linux 3.17 and newer.
-# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
-CONFIG_GETRANDOM=y
-
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-#CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
-#CONFIG_IEEE80211AC=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks (GAS/ANQP to learn more about the networks and network
-# selection based on available credentials).
-#CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-#CONFIG_HS20=y
-
-# Enable interface matching in wpa_supplicant
-#CONFIG_MATCH_IFACE=y
-
-# Disable roaming in wpa_supplicant
-#CONFIG_NO_ROAMING=y
-
-# AP mode operations with wpa_supplicant
-# This can be used for controlling AP mode operations with wpa_supplicant. It
-# should be noted that this is mainly aimed at simple cases like
-# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
-# external RADIUS server can be supported with hostapd.
-CONFIG_AP=y
-
-# P2P (Wi-Fi Direct)
-# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
-# more information on P2P operations.
-CONFIG_P2P=y
-
-# Enable TDLS support
-#CONFIG_TDLS=y
-
-# Wi-Fi Display
-# This can be used to enable Wi-Fi Display extensions for P2P using an external
-# program to control the additional information exchanges in the messages.
-#CONFIG_WIFI_DISPLAY=y
-
-# Autoscan
-# This can be used to enable automatic scan support in wpa_supplicant.
-# See wpa_supplicant.conf for more information on autoscan usage.
-#
-# Enabling directly a module will enable autoscan support.
-# For exponential module:
-#CONFIG_AUTOSCAN_EXPONENTIAL=y
-# For periodic module:
-#CONFIG_AUTOSCAN_PERIODIC=y
-
-# Password (and passphrase, etc.) backend for external storage
-# These optional mechanisms can be used to add support for storing passwords
-# and other secrets in external (to wpa_supplicant) location. This allows, for
-# example, operating system specific key storage to be used
-#
-# External password backend for testing purposes (developer use)
-#CONFIG_EXT_PASSWORD_TEST=y
-
-# Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
-
-# Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
-
-# OS X builds. This is only for building eapol_test.
-#CONFIG_OSX=y
-
-# Automatic Channel Selection
-# This will allow wpa_supplicant to pick the channel automatically when channel
-# is set to "0".
-#
-# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
-# to "channel=0". This would enable us to eventually add other ACS algorithms in
-# similar way.
-#
-# Automatic selection is currently only done through initialization, later on
-# we hope to do background checks to keep us moving to more ideal channels as
-# time goes by. ACS is currently only supported through the nl80211 driver and
-# your driver must have survey dump capability that is filled by the driver
-# during scanning.
-#
-# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
-# a newly to create wpa_supplicant.conf variable acs_num_scans.
-#
-# Supported ACS drivers:
-# * ath9k
-# * ath5k
-# * ath10k
-#
-# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
-#CONFIG_ACS=y
-
-# Support Multi Band Operation
-#CONFIG_MBO=y
-
-# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
-CONFIG_FILS=y
-# FILS shared key authentication with PFS
-#CONFIG_FILS_SK_PFS=y
-
-# Support RSN on IBSS networks
-# This is needed to be able to use mode=1 network profile with proto=RSN and
-# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
-CONFIG_IBSS_RSN=y
-
-# External PMKSA cache control
-# This can be used to enable control interface commands that allow the current
-# PMKSA cache entries to be fetched and new entries to be added.
-#CONFIG_PMKSA_CACHE_EXTERNAL=y
-
-# Mesh Networking (IEEE 802.11s)
-#CONFIG_MESH=y
-
-# Background scanning modules
-# These can be used to request wpa_supplicant to perform background scanning
-# operations for roaming within an ESS (same SSID). See the bgscan parameter in
-# the wpa_supplicant.conf file for more details.
-# Periodic background scans based on signal strength
-#CONFIG_BGSCAN_SIMPLE=y
-# Learn channels used by the network and try to avoid bgscans on other
-# channels (experimental)
-#CONFIG_BGSCAN_LEARN=y
-
-# Opportunistic Wireless Encryption (OWE)
-# Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
-
-# Device Provisioning Protocol (DPP)
-# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
-# wpa_supplicant/README-DPP for details)
-#CONFIG_DPP=y
-
-# uBus IPC/RPC System
-# Services can connect to the bus and provide methods
-# that can be called by other services or clients.
-CONFIG_UBUS=y
-
-# OpenWrt patch 380-disable-ctrl-iface-mib.patch
-# leads to the MIB only being compiled in if
-# CONFIG_CTRL_IFACE_MIB is enabled.
-CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/wpad_acl.json

@@ -1,16 +0,0 @@
-{
-	"user": "network",
-	"access": {
-		"service": {
-			"methods": [ "event" ]
-		},
-		"wpa_supplicant": {
-			"methods": [ "phy_set_state", "phy_set_macaddr_list", "phy_status" ]
-		},
-		"hostapd": {
-			"methods": [ "apsta_state" ]
-		}
-	},
-	"publish": [ "hostapd", "hostapd.*", "wpa_supplicant", "wpa_supplicant.*" ],
-	"send": [ "bss.*", "wps_credentials" ]
-}

feeds/hostapd/hostapd/files/wps-hotplug.sh

@@ -1,69 +0,0 @@
-#!/bin/sh
-
-wps_catch_credentials() {
-	local iface ifaces ifc ifname ssid encryption key radio radios
-	local found=0
-
-	. /usr/share/libubox/jshn.sh
-	ubus -S -t 30 listen wps_credentials | while read creds; do
-		json_init
-		json_load "$creds"
-		json_select wps_credentials || continue
-		json_get_vars ifname ssid key encryption
-		local ifcname="$ifname"
-		json_init
-		json_load "$(ubus -S call network.wireless status)"
-		json_get_keys radios
-		for radio in $radios; do
-			json_select $radio
-			json_select interfaces
-			json_get_keys ifaces
-			for ifc in $ifaces; do
-				json_select $ifc
-				json_get_vars ifname
-				[ "$ifname" = "$ifcname" ] && {
-					ubus -S call uci set "{\"config\":\"wireless\", \"type\":\"wifi-iface\",		\
-								\"match\": { \"device\": \"$radio\", \"encryption\": \"wps\" },	\
-								\"values\": { \"encryption\": \"$encryption\", 			\
-										\"ssid\": \"$ssid\", 				\
-										\"key\": \"$key\" } }"
-					ubus -S call uci commit '{"config": "wireless"}'
-					ubus -S call uci apply
-				}
-				json_select ..
-			done
-			json_select ..
-			json_select ..
-		done
-	done
-}
-
-if [ "$ACTION" = "released" ] && [ "$BUTTON" = "wps" ]; then
-	# If the button was pressed for 3 seconds or more, trigger WPS on
-	# wpa_supplicant only, no matter if hostapd is running or not.  If
-	# was pressed for less than 3 seconds, try triggering on
-	# hostapd. If there is no hostapd instance to trigger it on or WPS
-	# is not enabled on them, trigger it on wpa_supplicant.
-	if [ "$SEEN" -lt 3 ] ; then
-		wps_done=0
-		ubusobjs="$( ubus -S list hostapd.* )"
-		for ubusobj in $ubusobjs; do
-			ubus -S call $ubusobj wps_start && wps_done=1
-		done
-		[ $wps_done = 0 ] || return 0
-	fi
-	wps_done=0
-	ubusobjs="$( ubus -S list wpa_supplicant.* )"
-	for ubusobj in $ubusobjs; do
-		ifname="$(echo $ubusobj | cut -d'.' -f2 )"
-		multi_ap=""
-		if [ -e "/var/run/wpa_supplicant-${ifname}.conf.is_multiap" ]; then
-			ubus -S call $ubusobj wps_start '{ "multi_ap": true }' && wps_done=1
-		else
-			ubus -S call $ubusobj wps_start && wps_done=1
-		fi
-	done
-	[ $wps_done = 0 ] || wps_catch_credentials &
-fi
-
-return 0

feeds/hostapd/hostapd/patches/001-wolfssl-init-RNG-with-ECC-key.patch

@@ -1,43 +0,0 @@
-From 21ce83b4ae2b9563175fdb4fc4312096cc399cf8 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Wed, 5 May 2021 00:44:34 +0200
-Subject: [PATCH] wolfssl: add RNG to EC key
-
-Since upstream commit 6467de5a8840 ("Randomize z ordinates in
-scalar mult when timing resistant") WolfSSL requires a RNG for
-the EC key when built hardened which is the default.
-
-Set the RNG for the EC key to fix connections for OWE clients.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- src/crypto/crypto_wolfssl.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/src/crypto/crypto_wolfssl.c
-+++ b/src/crypto/crypto_wolfssl.c
-@@ -1340,6 +1340,7 @@ int ecc_projective_add_point(ecc_point *
- 
- struct crypto_ec {
- 	ecc_key key;
-+	WC_RNG rng;
- 	mp_int a;
- 	mp_int prime;
- 	mp_int order;
-@@ -1394,6 +1395,8 @@ struct crypto_ec * crypto_ec_init(int gr
- 		return NULL;
- 
- 	if (wc_ecc_init(&e->key) != 0 ||
-+	    wc_InitRng(&e->rng) != 0 ||
-+	    wc_ecc_set_rng(&e->key, &e->rng) != 0 ||
- 	    wc_ecc_set_curve(&e->key, 0, curve_id) != 0 ||
- 	    mp_init(&e->a) != MP_OKAY ||
- 	    mp_init(&e->prime) != MP_OKAY ||
-@@ -1425,6 +1428,7 @@ void crypto_ec_deinit(struct crypto_ec*
- 	mp_clear(&e->order);
- 	mp_clear(&e->prime);
- 	mp_clear(&e->a);
-+	wc_FreeRng(&e->rng);
- 	wc_ecc_free(&e->key);
- 	os_free(e);
- }

feeds/hostapd/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch

@@ -1,135 +0,0 @@
-From 8de8cd8380af0c43d4fde67a668d79ef73b26b26 Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 30 Jun 2020 14:18:58 +0200
-Subject: [PATCH 10/19] mesh: Allow DFS channels to be selected if dfs is
- enabled
-
-Note: DFS is assumed to be usable if a country code has been set
-
-Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- wpa_supplicant/wpa_supplicant.c | 25 +++++++++++++++++++------
- 1 file changed, 19 insertions(+), 6 deletions(-)
-
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2638,7 +2638,7 @@ static int drv_supports_vht(struct wpa_s
- }
- 
- 
--static bool ibss_mesh_is_80mhz_avail(int channel, struct hostapd_hw_modes *mode)
-+static bool ibss_mesh_is_80mhz_avail(int channel, struct hostapd_hw_modes *mode, bool dfs_enabled)
- {
- 	int i;
- 
-@@ -2647,7 +2647,10 @@ static bool ibss_mesh_is_80mhz_avail(int
- 
- 		chan = hw_get_channel_chan(mode, i, NULL);
- 		if (!chan ||
--		    chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
-+		    chan->flag & HOSTAPD_CHAN_DISABLED)
-+			return false;
-+		
-+		if (!dfs_enabled && chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
- 			return false;
- 	}
- 
-@@ -2774,7 +2777,7 @@ static void ibss_mesh_select_40mhz(struc
- 				   const struct wpa_ssid *ssid,
- 				   struct hostapd_hw_modes *mode,
- 				   struct hostapd_freq_params *freq,
--				   int obss_scan) {
-+				   int obss_scan, bool dfs_enabled) {
- 	int chan_idx;
- 	struct hostapd_channel_data *pri_chan = NULL, *sec_chan = NULL;
- 	int i, res;
-@@ -2798,8 +2801,11 @@ static void ibss_mesh_select_40mhz(struc
- 		return;
- 
- 	/* Check primary channel flags */
--	if (pri_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
-+	if (pri_chan->flag & HOSTAPD_CHAN_DISABLED)
- 		return;
-+	if (pri_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
-+		if (!dfs_enabled)
-+			return;
- 
- #ifdef CONFIG_HT_OVERRIDES
- 	if (ssid->disable_ht40)
-@@ -2825,8 +2831,11 @@ static void ibss_mesh_select_40mhz(struc
- 		return;
- 
- 	/* Check secondary channel flags */
--	if (sec_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
-+	if (sec_chan->flag & HOSTAPD_CHAN_DISABLED)
- 		return;
-+	if (sec_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
-+		if (!dfs_enabled)
-+			return;
- 
- 	if (ht40 == -1) {
- 		if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS))
-@@ -2880,7 +2889,7 @@ static bool ibss_mesh_select_80_160mhz(s
- 				       const struct wpa_ssid *ssid,
- 				       struct hostapd_hw_modes *mode,
- 				       struct hostapd_freq_params *freq,
--				       int ieee80211_mode, bool is_6ghz) {
-+				       int ieee80211_mode, bool is_6ghz, bool dfs_enabled) {
- 	static const int bw80[] = {
- 		5180, 5260, 5500, 5580, 5660, 5745, 5825,
- 		5955, 6035, 6115, 6195, 6275, 6355, 6435,
-@@ -2925,7 +2934,7 @@ static bool ibss_mesh_select_80_160mhz(s
- 		goto skip_80mhz;
- 
- 	/* Use 40 MHz if channel not usable */
--	if (!ibss_mesh_is_80mhz_avail(channel, mode))
-+	if (!ibss_mesh_is_80mhz_avail(channel, mode, dfs_enabled))
- 		goto skip_80mhz;
- 
- 	chwidth = CONF_OPER_CHWIDTH_80MHZ;
-@@ -2939,7 +2948,7 @@ static bool ibss_mesh_select_80_160mhz(s
- 	if ((mode->he_capab[ieee80211_mode].phy_cap[
- 		     HE_PHYCAP_CHANNEL_WIDTH_SET_IDX] &
- 	     HE_PHYCAP_CHANNEL_WIDTH_SET_160MHZ_IN_5G) && is_6ghz &&
--	    ibss_mesh_is_80mhz_avail(channel + 16, mode)) {
-+	    ibss_mesh_is_80mhz_avail(channel + 16, mode, dfs_enabled)) {
- 		for (j = 0; j < ARRAY_SIZE(bw160); j++) {
- 			if (freq->freq == bw160[j]) {
- 				chwidth = CONF_OPER_CHWIDTH_160MHZ;
-@@ -2967,10 +2976,12 @@ static bool ibss_mesh_select_80_160mhz(s
- 				if (!chan)
- 					continue;
- 
--				if (chan->flag & (HOSTAPD_CHAN_DISABLED |
--						  HOSTAPD_CHAN_NO_IR |
--						  HOSTAPD_CHAN_RADAR))
-+				if (chan->flag & HOSTAPD_CHAN_DISABLED)
- 					continue;
-+				if (chan->flag & (HOSTAPD_CHAN_RADAR |
-+						  HOSTAPD_CHAN_NO_IR))
-+					if (!dfs_enabled)
-+						continue;
- 
- 				/* Found a suitable second segment for 80+80 */
- 				chwidth = CONF_OPER_CHWIDTH_80P80MHZ;
-@@ -3025,6 +3036,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
- 	int i, obss_scan = 1;
- 	u8 channel;
- 	bool is_6ghz;
-+	bool dfs_enabled = wpa_s->conf->country[0] && (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
- 
- 	freq->freq = ssid->frequency;
- 
-@@ -3070,9 +3082,9 @@ void ibss_mesh_setup_freq(struct wpa_sup
- 	freq->channel = channel;
- 	/* Setup higher BW only for 5 GHz */
- 	if (mode->mode == HOSTAPD_MODE_IEEE80211A) {
--		ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan);
-+		ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan, dfs_enabled);
- 		if (!ibss_mesh_select_80_160mhz(wpa_s, ssid, mode, freq,
--						ieee80211_mode, is_6ghz))
-+						ieee80211_mode, is_6ghz, dfs_enabled))
- 			freq->he_enabled = freq->vht_enabled = false;
- 	}
- 

feeds/hostapd/hostapd/patches/011-mesh-use-deterministic-channel-on-channel-switch.patch

@@ -1,81 +0,0 @@
-From fc8ea40f6130ac18d9c66797de2cf1d5af55d496 Mon Sep 17 00:00:00 2001
-From: Markus Theil <markus.theil@tu-ilmenau.de>
-Date: Tue, 30 Jun 2020 14:19:07 +0200
-Subject: [PATCH 19/19] mesh: use deterministic channel on channel switch
-
-This patch uses a deterministic channel on DFS channel switch
-in mesh networks. Otherwise, when switching to a usable but not
-available channel, no CSA can be sent and a random channel is choosen
-without notification of other nodes. It is then quite likely, that
-the mesh network gets disconnected.
-
-Fix this by using a deterministic number, based on the sha256 hash
-of the mesh ID, in order to use at least a different number in each
-mesh network.
-
-Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
----
- src/ap/dfs.c                 | 20 +++++++++++++++++++-
- src/drivers/driver_nl80211.c |  4 ++++
- 2 files changed, 23 insertions(+), 1 deletion(-)
-
---- a/src/ap/dfs.c
-+++ b/src/ap/dfs.c
-@@ -17,6 +17,7 @@
- #include "ap_drv_ops.h"
- #include "drivers/driver.h"
- #include "dfs.h"
-+#include "crypto/crypto.h"
- 
- 
- enum dfs_channel_type {
-@@ -526,9 +527,14 @@ dfs_get_valid_channel(struct hostapd_ifa
- 	int num_available_chandefs;
- 	int chan_idx, chan_idx2;
- 	int sec_chan_idx_80p80 = -1;
-+	bool is_mesh = false;
- 	int i;
- 	u32 _rand;
- 
-+#ifdef CONFIG_MESH
-+	is_mesh = iface->mconf;
-+#endif
-+
- 	wpa_printf(MSG_DEBUG, "DFS: Selecting random channel");
- 	*secondary_channel = 0;
- 	*oper_centr_freq_seg0_idx = 0;
-@@ -548,8 +554,20 @@ dfs_get_valid_channel(struct hostapd_ifa
- 	if (num_available_chandefs == 0)
- 		return NULL;
- 
--	if (os_get_random((u8 *) &_rand, sizeof(_rand)) < 0)
-+	/* try to use deterministic channel in mesh, so that both sides
-+	 * have a chance to switch to the same channel */
-+	if (is_mesh) {
-+#ifdef CONFIG_MESH
-+		u64 hash[4];
-+		const u8 *meshid[1] = { &iface->mconf->meshid[0] };
-+		const size_t meshid_len = iface->mconf->meshid_len;
-+
-+		sha256_vector(1, meshid, &meshid_len, (u8 *)&hash[0]);
-+		_rand = hash[0] + hash[1] + hash[2] + hash[3];
-+#endif
-+	} else if (os_get_random((u8 *) &_rand, sizeof(_rand)) < 0)
- 		return NULL;
-+
- 	chan_idx = _rand % num_available_chandefs;
- 	dfs_find_channel(iface, &chan, chan_idx, type);
- 	if (!chan) {
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -11017,6 +11017,10 @@ static int nl80211_switch_channel(void *
- 	if (ret)
- 		goto error;
- 
-+	if (drv->nlmode == NL80211_IFTYPE_MESH_POINT) {
-+		nla_put_flag(msg, NL80211_ATTR_HANDLE_DFS);
-+	}
-+
- 	/* beacon_csa params */
- 	beacon_csa = nla_nest_start(msg, NL80211_ATTR_CSA_IES);
- 	if (!beacon_csa)

feeds/hostapd/hostapd/patches/021-fix-sta-add-after-previous-connection.patch

@@ -1,26 +0,0 @@
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -4621,6 +4621,13 @@ static int add_associated_sta(struct hos
- 	 * drivers to accept the STA parameter configuration. Since this is
- 	 * after a new FT-over-DS exchange, a new TK has been derived, so key
- 	 * reinstallation is not a concern for this case.
-+	 *
-+	 * If the STA was associated and authorized earlier, but came for a new
-+	 * connection (!added_unassoc + !reassoc), remove the existing STA entry
-+	 * so that it can be re-added. This case is rarely seen when the AP could
-+	 * not receive the deauth/disassoc frame from the STA. And the STA comes
-+	 * back with new connection within a short period or before the inactive
-+	 * STA entry is removed from the list.
- 	 */
- 	wpa_printf(MSG_DEBUG, "Add associated STA " MACSTR
- 		   " (added_unassoc=%d auth_alg=%u ft_over_ds=%u reassoc=%d authorized=%d ft_tk=%d fils_tk=%d)",
-@@ -4634,7 +4641,8 @@ static int add_associated_sta(struct hos
- 	    (!(sta->flags & WLAN_STA_AUTHORIZED) ||
- 	     (reassoc && sta->ft_over_ds && sta->auth_alg == WLAN_AUTH_FT) ||
- 	     (!wpa_auth_sta_ft_tk_already_set(sta->wpa_sm) &&
--	      !wpa_auth_sta_fils_tk_already_set(sta->wpa_sm)))) {
-+	      !wpa_auth_sta_fils_tk_already_set(sta->wpa_sm)) ||
-+	     (!reassoc && (sta->flags & WLAN_STA_AUTHORIZED)))) {
- 		hostapd_drv_sta_remove(hapd, sta->addr);
- 		wpa_auth_sm_event(sta->wpa_sm, WPA_DRV_STA_REMOVED);
- 		set = 0;

feeds/hostapd/hostapd/patches/022-hostapd-fix-use-of-uninitialized-stack-variables.patch

@@ -1,25 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 8 Jul 2021 16:33:03 +0200
-Subject: [PATCH] hostapd: fix use of uninitialized stack variables
-
-When a CSA is performed on an 80 MHz channel, hostapd_change_config_freq
-unconditionally calls hostapd_set_oper_centr_freq_seg0/1_idx with seg0/1
-filled by ieee80211_freq_to_chan.
-However, if ieee80211_freq_to_chan fails (because the freq is 0 or invalid),
-seg0/1 remains uninitialized and filled with stack garbage, causing errors
-such as "hostapd: 80 MHz: center segment 1 configured"
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -3764,7 +3764,7 @@ static int hostapd_change_config_freq(st
- 				      struct hostapd_freq_params *old_params)
- {
- 	int channel;
--	u8 seg0, seg1;
-+	u8 seg0 = 0, seg1 = 0;
- 	struct hostapd_hw_modes *mode;
- 
- 	if (!params->channel) {

feeds/hostapd/hostapd/patches/030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch

@@ -1,275 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 28 Jul 2021 05:49:46 +0200
-Subject: [PATCH] driver_nl80211: rewrite neigh code to not depend on
- libnl3-route
-
-Removes an unnecessary dependency and also makes the code smaller
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -16,9 +16,6 @@
- #include <net/if.h>
- #include <netlink/genl/genl.h>
- #include <netlink/genl/ctrl.h>
--#ifdef CONFIG_LIBNL3_ROUTE
--#include <netlink/route/neighbour.h>
--#endif /* CONFIG_LIBNL3_ROUTE */
- #include <linux/rtnetlink.h>
- #include <netpacket/packet.h>
- #include <linux/errqueue.h>
-@@ -5783,26 +5780,29 @@ fail:
- 
- static void rtnl_neigh_delete_fdb_entry(struct i802_bss *bss, const u8 *addr)
- {
--#ifdef CONFIG_LIBNL3_ROUTE
- 	struct wpa_driver_nl80211_data *drv = bss->drv;
--	struct rtnl_neigh *rn;
--	struct nl_addr *nl_addr;
-+	struct ndmsg nhdr = {
-+		.ndm_state = NUD_PERMANENT,
-+		.ndm_ifindex = bss->ifindex,
-+		.ndm_family = AF_BRIDGE,
-+	};
-+	struct nl_msg *msg;
- 	int err;
- 
--	rn = rtnl_neigh_alloc();
--	if (!rn)
-+	msg = nlmsg_alloc_simple(RTM_DELNEIGH, NLM_F_CREATE);
-+	if (!msg)
- 		return;
- 
--	rtnl_neigh_set_family(rn, AF_BRIDGE);
--	rtnl_neigh_set_ifindex(rn, bss->ifindex);
--	nl_addr = nl_addr_build(AF_BRIDGE, (void *) addr, ETH_ALEN);
--	if (!nl_addr) {
--		rtnl_neigh_put(rn);
--		return;
--	}
--	rtnl_neigh_set_lladdr(rn, nl_addr);
-+	if (nlmsg_append(msg, &nhdr, sizeof(nhdr), NLMSG_ALIGNTO) < 0)
-+		goto errout;
-+
-+	if (nla_put(msg, NDA_LLADDR, ETH_ALEN, (void *)addr))
-+		goto errout;
-+
-+	if (nl_send_auto_complete(drv->rtnl_sk, msg) < 0)
-+		goto errout;
- 
--	err = rtnl_neigh_delete(drv->rtnl_sk, rn, 0);
-+	err = nl_wait_for_ack(drv->rtnl_sk);
- 	if (err < 0) {
- 		wpa_printf(MSG_DEBUG, "nl80211: bridge FDB entry delete for "
- 			   MACSTR " ifindex=%d failed: %s", MAC2STR(addr),
-@@ -5812,9 +5812,8 @@ static void rtnl_neigh_delete_fdb_entry(
- 			   MACSTR, MAC2STR(addr));
- 	}
- 
--	nl_addr_put(nl_addr);
--	rtnl_neigh_put(rn);
--#endif /* CONFIG_LIBNL3_ROUTE */
-+errout:
-+	nlmsg_free(msg);
- }
- 
- 
-@@ -8492,7 +8491,6 @@ static void *i802_init(struct hostapd_da
- 	    (params->num_bridge == 0 || !params->bridge[0]))
- 		add_ifidx(drv, br_ifindex, drv->ifindex);
- 
--#ifdef CONFIG_LIBNL3_ROUTE
- 	if (bss->added_if_into_bridge || bss->already_in_bridge) {
- 		int err;
- 
-@@ -8509,7 +8507,6 @@ static void *i802_init(struct hostapd_da
- 			goto failed;
- 		}
- 	}
--#endif /* CONFIG_LIBNL3_ROUTE */
- 
- 	if (drv->capa.flags2 & WPA_DRIVER_FLAGS2_CONTROL_PORT_RX) {
- 		wpa_printf(MSG_DEBUG,
-@@ -11883,13 +11880,14 @@ static int wpa_driver_br_add_ip_neigh(vo
- 				      const u8 *ipaddr, int prefixlen,
- 				      const u8 *addr)
- {
--#ifdef CONFIG_LIBNL3_ROUTE
- 	struct i802_bss *bss = priv;
- 	struct wpa_driver_nl80211_data *drv = bss->drv;
--	struct rtnl_neigh *rn;
--	struct nl_addr *nl_ipaddr = NULL;
--	struct nl_addr *nl_lladdr = NULL;
--	int family, addrsize;
-+	struct ndmsg nhdr = {
-+		.ndm_state = NUD_PERMANENT,
-+		.ndm_ifindex = bss->br_ifindex,
-+	};
-+	struct nl_msg *msg;
-+	int addrsize;
- 	int res;
- 
- 	if (!ipaddr || prefixlen == 0 || !addr)
-@@ -11908,85 +11906,66 @@ static int wpa_driver_br_add_ip_neigh(vo
- 	}
- 
- 	if (version == 4) {
--		family = AF_INET;
-+		nhdr.ndm_family = AF_INET;
- 		addrsize = 4;
- 	} else if (version == 6) {
--		family = AF_INET6;
-+		nhdr.ndm_family = AF_INET6;
- 		addrsize = 16;
- 	} else {
- 		return -EINVAL;
- 	}
- 
--	rn = rtnl_neigh_alloc();
--	if (rn == NULL)
-+	msg = nlmsg_alloc_simple(RTM_NEWNEIGH, NLM_F_CREATE);
-+	if (!msg)
- 		return -ENOMEM;
- 
--	/* set the destination ip address for neigh */
--	nl_ipaddr = nl_addr_build(family, (void *) ipaddr, addrsize);
--	if (nl_ipaddr == NULL) {
--		wpa_printf(MSG_DEBUG, "nl80211: nl_ipaddr build failed");
--		res = -ENOMEM;
-+	res = -ENOMEM;
-+	if (nlmsg_append(msg, &nhdr, sizeof(nhdr), NLMSG_ALIGNTO) < 0)
- 		goto errout;
--	}
--	nl_addr_set_prefixlen(nl_ipaddr, prefixlen);
--	res = rtnl_neigh_set_dst(rn, nl_ipaddr);
--	if (res) {
--		wpa_printf(MSG_DEBUG,
--			   "nl80211: neigh set destination addr failed");
-+
-+	if (nla_put(msg, NDA_DST, addrsize, (void *)ipaddr))
- 		goto errout;
--	}
- 
--	/* set the corresponding lladdr for neigh */
--	nl_lladdr = nl_addr_build(AF_BRIDGE, (u8 *) addr, ETH_ALEN);
--	if (nl_lladdr == NULL) {
--		wpa_printf(MSG_DEBUG, "nl80211: neigh set lladdr failed");
--		res = -ENOMEM;
-+	if (nla_put(msg, NDA_LLADDR, ETH_ALEN, (void *)addr))
- 		goto errout;
--	}
--	rtnl_neigh_set_lladdr(rn, nl_lladdr);
- 
--	rtnl_neigh_set_ifindex(rn, bss->br_ifindex);
--	rtnl_neigh_set_state(rn, NUD_PERMANENT);
-+	res = nl_send_auto_complete(drv->rtnl_sk, msg);
-+	if (res < 0)
-+		goto errout;
- 
--	res = rtnl_neigh_add(drv->rtnl_sk, rn, NLM_F_CREATE);
-+	res = nl_wait_for_ack(drv->rtnl_sk);
- 	if (res) {
- 		wpa_printf(MSG_DEBUG,
- 			   "nl80211: Adding bridge ip neigh failed: %s",
- 			   nl_geterror(res));
- 	}
- errout:
--	if (nl_lladdr)
--		nl_addr_put(nl_lladdr);
--	if (nl_ipaddr)
--		nl_addr_put(nl_ipaddr);
--	if (rn)
--		rtnl_neigh_put(rn);
-+	nlmsg_free(msg);
- 	return res;
--#else /* CONFIG_LIBNL3_ROUTE */
--	return -1;
--#endif /* CONFIG_LIBNL3_ROUTE */
- }
- 
- 
- static int wpa_driver_br_delete_ip_neigh(void *priv, u8 version,
- 					 const u8 *ipaddr)
- {
--#ifdef CONFIG_LIBNL3_ROUTE
- 	struct i802_bss *bss = priv;
- 	struct wpa_driver_nl80211_data *drv = bss->drv;
--	struct rtnl_neigh *rn;
--	struct nl_addr *nl_ipaddr;
--	int family, addrsize;
-+	struct ndmsg nhdr = {
-+		.ndm_state = NUD_PERMANENT,
-+		.ndm_ifindex = bss->br_ifindex,
-+	};
-+	struct nl_msg *msg;
-+	int addrsize;
- 	int res;
- 
- 	if (!ipaddr)
- 		return -EINVAL;
- 
- 	if (version == 4) {
--		family = AF_INET;
-+		nhdr.ndm_family = AF_INET;
- 		addrsize = 4;
- 	} else if (version == 6) {
--		family = AF_INET6;
-+		nhdr.ndm_family = AF_INET6;
- 		addrsize = 16;
- 	} else {
- 		return -EINVAL;
-@@ -12004,41 +11983,30 @@ static int wpa_driver_br_delete_ip_neigh
- 		return -1;
- 	}
- 
--	rn = rtnl_neigh_alloc();
--	if (rn == NULL)
-+	msg = nlmsg_alloc_simple(RTM_DELNEIGH, NLM_F_CREATE);
-+	if (!msg)
- 		return -ENOMEM;
- 
--	/* set the destination ip address for neigh */
--	nl_ipaddr = nl_addr_build(family, (void *) ipaddr, addrsize);
--	if (nl_ipaddr == NULL) {
--		wpa_printf(MSG_DEBUG, "nl80211: nl_ipaddr build failed");
--		res = -ENOMEM;
-+	res = -ENOMEM;
-+	if (nlmsg_append(msg, &nhdr, sizeof(nhdr), NLMSG_ALIGNTO) < 0)
- 		goto errout;
--	}
--	res = rtnl_neigh_set_dst(rn, nl_ipaddr);
--	if (res) {
--		wpa_printf(MSG_DEBUG,
--			   "nl80211: neigh set destination addr failed");
-+
-+	if (nla_put(msg, NDA_DST, addrsize, (void *)ipaddr))
- 		goto errout;
--	}
- 
--	rtnl_neigh_set_ifindex(rn, bss->br_ifindex);
-+	res = nl_send_auto_complete(drv->rtnl_sk, msg);
-+	if (res < 0)
-+		goto errout;
- 
--	res = rtnl_neigh_delete(drv->rtnl_sk, rn, 0);
-+	res = nl_wait_for_ack(drv->rtnl_sk);
- 	if (res) {
- 		wpa_printf(MSG_DEBUG,
- 			   "nl80211: Deleting bridge ip neigh failed: %s",
- 			   nl_geterror(res));
- 	}
- errout:
--	if (nl_ipaddr)
--		nl_addr_put(nl_ipaddr);
--	if (rn)
--		rtnl_neigh_put(rn);
-+	nlmsg_free(msg);
- 	return res;
--#else /* CONFIG_LIBNL3_ROUTE */
--	return -1;
--#endif /* CONFIG_LIBNL3_ROUTE */
- }
- 
- 

feeds/hostapd/hostapd/patches/040-mesh-allow-processing-authentication-frames-in-block.patch

@@ -1,34 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 18 Feb 2019 12:57:11 +0100
-Subject: [PATCH] mesh: allow processing authentication frames in blocked state
-
-If authentication fails repeatedly e.g. because of a weak signal, the link
-can end up in blocked state. If one of the nodes tries to establish a link
-again before it is unblocked on the other side, it will block the link to
-that other side. The same happens on the other side when it unblocks the
-link. In that scenario, the link never recovers on its own.
-
-To fix this, allow restarting authentication even if the link is in blocked
-state, but don't initiate the attempt until the blocked period is over.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -3020,15 +3020,6 @@ static void handle_auth(struct hostapd_d
- 				       seq_ctrl);
- 			return;
- 		}
--#ifdef CONFIG_MESH
--		if ((hapd->conf->mesh & MESH_ENABLED) &&
--		    sta->plink_state == PLINK_BLOCKED) {
--			wpa_printf(MSG_DEBUG, "Mesh peer " MACSTR
--				   " is blocked - drop Authentication frame",
--				   MAC2STR(sa));
--			return;
--		}
--#endif /* CONFIG_MESH */
- #ifdef CONFIG_PASN
- 		if (auth_alg == WLAN_AUTH_PASN &&
- 		    (sta->flags & WLAN_STA_ASSOC)) {

feeds/hostapd/hostapd/patches/050-build_fix.patch

@@ -1,20 +0,0 @@
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -324,6 +324,7 @@ ifdef CONFIG_FILS
- CFLAGS += -DCONFIG_FILS
- OBJS += ../src/ap/fils_hlp.o
- NEED_SHA384=y
-+NEED_HMAC_SHA384_KDF=y
- NEED_AES_SIV=y
- ifdef CONFIG_FILS_SK_PFS
- CFLAGS += -DCONFIG_FILS_SK_PFS
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -331,6 +331,7 @@ endif
- ifdef CONFIG_FILS
- CFLAGS += -DCONFIG_FILS
- NEED_SHA384=y
-+NEED_HMAC_SHA384_KDF=y
- NEED_AES_SIV=y
- ifdef CONFIG_FILS_SK_PFS
- CFLAGS += -DCONFIG_FILS_SK_PFS

feeds/hostapd/hostapd/patches/120-mbedtls-fips186_2_prf.patch

@@ -1,114 +0,0 @@
-From c8dba4bd750269bcc80fed3d546e2077cb4cdf0e Mon Sep 17 00:00:00 2001
-From: Glenn Strauss <gstrauss@gluelogic.com>
-Date: Tue, 19 Jul 2022 20:02:21 -0400
-Subject: [PATCH 2/7] mbedtls: fips186_2_prf()
-
-Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
----
- hostapd/Makefile            |  4 ---
- src/crypto/crypto_mbedtls.c | 60 +++++++++++++++++++++++++++++++++++++
- wpa_supplicant/Makefile     |  4 ---
- 3 files changed, 60 insertions(+), 8 deletions(-)
-
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -759,10 +759,6 @@ endif
- OBJS += ../src/crypto/crypto_$(CONFIG_CRYPTO).o
- HOBJS += ../src/crypto/crypto_$(CONFIG_CRYPTO).o
- SOBJS += ../src/crypto/crypto_$(CONFIG_CRYPTO).o
--ifdef NEED_FIPS186_2_PRF
--OBJS += ../src/crypto/fips_prf_internal.o
--SHA1OBJS += ../src/crypto/sha1-internal.o
--endif
- ifeq ($(CONFIG_CRYPTO), mbedtls)
- ifdef CONFIG_DPP
- LIBS += -lmbedx509
---- a/src/crypto/crypto_mbedtls.c
-+++ b/src/crypto/crypto_mbedtls.c
-@@ -132,6 +132,12 @@
- #define CRYPTO_MBEDTLS_HMAC_KDF_SHA512
- #endif
- 
-+#if defined(EAP_SIM) || defined(EAP_SIM_DYNAMIC) || defined(EAP_SERVER_SIM) \
-+ || defined(EAP_AKA) || defined(EAP_AKA_DYNAMIC) || defined(EAP_SERVER_AKA)
-+/* EAP_SIM=y EAP_AKA=y */
-+#define CRYPTO_MBEDTLS_FIPS186_2_PRF
-+#endif
-+
- #if defined(EAP_FAST) || defined(EAP_FAST_DYNAMIC) || defined(EAP_SERVER_FAST) \
-  || defined(EAP_TEAP) || defined(EAP_TEAP_DYNAMIC) || defined(EAP_SERVER_FAST)
- #define CRYPTO_MBEDTLS_SHA1_T_PRF
-@@ -813,6 +819,60 @@ int sha1_t_prf(const u8 *key, size_t key
- 
- #endif /* CRYPTO_MBEDTLS_SHA1_T_PRF */
- 
-+#ifdef CRYPTO_MBEDTLS_FIPS186_2_PRF
-+
-+/* fips_prf_internal.c sha1-internal.c */
-+
-+/* used only by src/eap_common/eap_sim_common.c:eap_sim_prf()
-+ * for eap_sim_derive_keys() and eap_sim_derive_keys_reauth()
-+ * where xlen is 160 */
-+
-+int fips186_2_prf(const u8 *seed, size_t seed_len, u8 *x, size_t xlen)
-+{
-+	/* FIPS 186-2 + change notice 1 */
-+
-+	mbedtls_sha1_context ctx;
-+	u8 * const xkey = ctx.MBEDTLS_PRIVATE(buffer);
-+	u32 * const xstate = ctx.MBEDTLS_PRIVATE(state);
-+	const u32 xstate_init[] =
-+	  { 0x67452301, 0xEFCDAB89, 0x98BADCFE, 0x10325476, 0xC3D2E1F0 };
-+
-+	mbedtls_sha1_init(&ctx);
-+	os_memcpy(xkey, seed, seed_len < 64 ? seed_len : 64);
-+
-+	/* note: does not fill extra bytes if (xlen % 20) (SHA1_MAC_LEN) */
-+	for (; xlen >= 20; xlen -= 20) {
-+		/* XSEED_j = 0 */
-+		/* XVAL = (XKEY + XSEED_j) mod 2^b */
-+
-+		/* w_i = G(t, XVAL) */
-+		os_memcpy(xstate, xstate_init, sizeof(xstate_init));
-+		mbedtls_internal_sha1_process(&ctx, xkey);
-+
-+	  #if __BYTE_ORDER == __LITTLE_ENDIAN
-+		xstate[0] = host_to_be32(xstate[0]);
-+		xstate[1] = host_to_be32(xstate[1]);
-+		xstate[2] = host_to_be32(xstate[2]);
-+		xstate[3] = host_to_be32(xstate[3]);
-+		xstate[4] = host_to_be32(xstate[4]);
-+	  #endif
-+		os_memcpy(x, xstate, 20);
-+		if (xlen == 20) /*(done; skip prep for next loop)*/
-+			break;
-+
-+		/* XKEY = (1 + XKEY + w_i) mod 2^b */
-+		for (u32 carry = 1, k = 20; k-- > 0; carry >>= 8)
-+			xkey[k] = (carry += xkey[k] + x[k]) & 0xff;
-+		x += 20;
-+		/* x_j = w_0|w_1 (each pair of iterations through loop)*/
-+	}
-+
-+	mbedtls_sha1_free(&ctx);
-+	return 0;
-+}
-+
-+#endif /* CRYPTO_MBEDTLS_FIPS186_2_PRF */
-+
- #endif /* MBEDTLS_SHA1_C */
- 
- 
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -1174,10 +1174,6 @@ endif
- OBJS += ../src/crypto/crypto_$(CONFIG_CRYPTO).o
- OBJS_p += ../src/crypto/crypto_$(CONFIG_CRYPTO).o
- OBJS_priv += ../src/crypto/crypto_$(CONFIG_CRYPTO).o
--ifdef NEED_FIPS186_2_PRF
--OBJS += ../src/crypto/fips_prf_internal.o
--SHA1OBJS += ../src/crypto/sha1-internal.o
--endif
- ifeq ($(CONFIG_CRYPTO), mbedtls)
- LIBS += -lmbedcrypto
- LIBS_p += -lmbedcrypto

feeds/hostapd/hostapd/patches/130-mbedtls-annotate-with-TEST_FAIL-for-hwsim-tests.patch

@@ -1,421 +0,0 @@
-From 31bd19e0e0254b910cccfd3ddc6a6a9222bbcfc0 Mon Sep 17 00:00:00 2001
-From: Glenn Strauss <gstrauss@gluelogic.com>
-Date: Sun, 9 Oct 2022 05:12:17 -0400
-Subject: [PATCH 3/7] mbedtls: annotate with TEST_FAIL() for hwsim tests
-
-Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
----
- src/crypto/crypto_mbedtls.c | 124 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 124 insertions(+)
-
---- a/src/crypto/crypto_mbedtls.c
-+++ b/src/crypto/crypto_mbedtls.c
-@@ -280,6 +280,9 @@ __attribute_noinline__
- static int md_vector(size_t num_elem, const u8 *addr[], const size_t *len,
-                      u8 *mac, mbedtls_md_type_t md_type)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	mbedtls_md_context_t ctx;
- 	mbedtls_md_init(&ctx);
- 	if (mbedtls_md_setup(&ctx, mbedtls_md_info_from_type(md_type), 0) != 0){
-@@ -343,6 +346,9 @@ __attribute_noinline__
- static int sha384_512_vector(size_t num_elem, const u8 *addr[],
-                              const size_t *len, u8 *mac, int is384)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	struct mbedtls_sha512_context ctx;
- 	mbedtls_sha512_init(&ctx);
-   #if MBEDTLS_VERSION_MAJOR >= 3
-@@ -375,6 +381,9 @@ int sha384_vector(size_t num_elem, const
- #include <mbedtls/sha256.h>
- int sha256_vector(size_t num_elem, const u8 *addr[], const size_t *len, u8 *mac)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	struct mbedtls_sha256_context ctx;
- 	mbedtls_sha256_init(&ctx);
-   #if MBEDTLS_VERSION_MAJOR >= 3
-@@ -397,6 +406,9 @@ int sha256_vector(size_t num_elem, const
- #include <mbedtls/sha1.h>
- int sha1_vector(size_t num_elem, const u8 *addr[], const size_t *len, u8 *mac)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	struct mbedtls_sha1_context ctx;
- 	mbedtls_sha1_init(&ctx);
-   #if MBEDTLS_VERSION_MAJOR >= 3
-@@ -419,6 +431,9 @@ int sha1_vector(size_t num_elem, const u
- #include <mbedtls/md5.h>
- int md5_vector(size_t num_elem, const u8 *addr[], const size_t *len, u8 *mac)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	struct mbedtls_md5_context ctx;
- 	mbedtls_md5_init(&ctx);
-   #if MBEDTLS_VERSION_MAJOR >= 3
-@@ -441,6 +456,9 @@ int md5_vector(size_t num_elem, const u8
- #include <mbedtls/md4.h>
- int md4_vector(size_t num_elem, const u8 *addr[], const size_t *len, u8 *mac)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	struct mbedtls_md4_context ctx;
- 	mbedtls_md4_init(&ctx);
- 	mbedtls_md4_starts_ret(&ctx);
-@@ -460,6 +478,9 @@ static int hmac_vector(const u8 *key, si
-                        const u8 *addr[], const size_t *len, u8 *mac,
-                        mbedtls_md_type_t md_type)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	mbedtls_md_context_t ctx;
- 	mbedtls_md_init(&ctx);
- 	if (mbedtls_md_setup(&ctx, mbedtls_md_info_from_type(md_type), 1) != 0){
-@@ -571,6 +592,9 @@ static int hmac_kdf_expand(const u8 *prk
-                            const char *label, const u8 *info, size_t info_len,
-                            u8 *okm, size_t okm_len, mbedtls_md_type_t md_type)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	const mbedtls_md_info_t *md_info = mbedtls_md_info_from_type(md_type);
-   #ifdef MBEDTLS_HKDF_C
- 	if (label == NULL)  /* RFC 5869 HKDF-Expand when (label == NULL) */
-@@ -663,6 +687,9 @@ static int hmac_prf_bits(const u8 *key,
-                          const u8 *data, size_t data_len, u8 *buf,
-                          size_t buf_len_bits, mbedtls_md_type_t md_type)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	mbedtls_md_context_t ctx;
- 	mbedtls_md_init(&ctx);
- 	const mbedtls_md_info_t *md_info = mbedtls_md_info_from_type(md_type);
-@@ -938,6 +965,9 @@ int pbkdf2_sha1(const char *passphrase,
- 
- static void *aes_crypt_init_mode(const u8 *key, size_t len, int mode)
- {
-+	if (TEST_FAIL())
-+		return NULL;
-+
- 	mbedtls_aes_context *aes = os_malloc(sizeof(*aes));
- 	if (!aes)
- 		return NULL;
-@@ -996,6 +1026,9 @@ void aes_decrypt_deinit(void *ctx)
- /* aes-wrap.c */
- int aes_wrap(const u8 *kek, size_t kek_len, int n, const u8 *plain, u8 *cipher)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	mbedtls_nist_kw_context ctx;
- 	mbedtls_nist_kw_init(&ctx);
- 	size_t olen;
-@@ -1010,6 +1043,9 @@ int aes_wrap(const u8 *kek, size_t kek_l
- /* aes-unwrap.c */
- int aes_unwrap(const u8 *kek, size_t kek_len, int n, const u8 *cipher, u8 *plain)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	mbedtls_nist_kw_context ctx;
- 	mbedtls_nist_kw_init(&ctx);
- 	size_t olen;
-@@ -1041,6 +1077,9 @@ int omac1_aes_vector(
-     const u8 *key, size_t key_len, size_t num_elem, const u8 *addr[],
-     const size_t *len, u8 *mac)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	mbedtls_cipher_type_t cipher_type;
- 	switch (key_len) {
- 	case 16: cipher_type = MBEDTLS_CIPHER_AES_128_ECB; break;
-@@ -1103,6 +1142,9 @@ int omac1_aes_256(const u8 *key, const u
- /* aes-encblock.c */
- int aes_128_encrypt_block(const u8 *key, const u8 *in, u8 *out)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	mbedtls_aes_context aes;
- 	mbedtls_aes_init(&aes);
- 	int ret = mbedtls_aes_setkey_enc(&aes, key, 128)
-@@ -1118,6 +1160,9 @@ int aes_128_encrypt_block(const u8 *key,
- int aes_ctr_encrypt(const u8 *key, size_t key_len, const u8 *nonce,
- 		    u8 *data, size_t data_len)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	unsigned char counter[MBEDTLS_AES_BLOCK_SIZE];
- 	unsigned char stream_block[MBEDTLS_AES_BLOCK_SIZE];
- 	os_memcpy(counter, nonce, MBEDTLS_AES_BLOCK_SIZE);/*(must be writable)*/
-@@ -1160,11 +1205,17 @@ static int aes_128_cbc_oper(const u8 *ke
- 
- int aes_128_cbc_encrypt(const u8 *key, const u8 *iv, u8 *data, size_t data_len)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	return aes_128_cbc_oper(key, iv, data, data_len, MBEDTLS_AES_ENCRYPT);
- }
- 
- int aes_128_cbc_decrypt(const u8 *key, const u8 *iv, u8 *data, size_t data_len)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	return aes_128_cbc_oper(key, iv, data, data_len, MBEDTLS_AES_DECRYPT);
- }
- 
-@@ -1407,6 +1458,10 @@ int crypto_hash_finish(struct crypto_has
- 	}
- 	mbedtls_md_free(mctx);
- 	os_free(mctx);
-+
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	return 0;
- }
- 
-@@ -1421,6 +1476,9 @@ int crypto_hash_finish(struct crypto_has
- 
- struct crypto_bignum *crypto_bignum_init(void)
- {
-+	if (TEST_FAIL())
-+		return NULL;
-+
- 	mbedtls_mpi *bn = os_malloc(sizeof(*bn));
- 	if (bn)
- 		mbedtls_mpi_init(bn);
-@@ -1429,6 +1487,9 @@ struct crypto_bignum *crypto_bignum_init
- 
- struct crypto_bignum *crypto_bignum_init_set(const u8 *buf, size_t len)
- {
-+	if (TEST_FAIL())
-+		return NULL;
-+
- 	mbedtls_mpi *bn = os_malloc(sizeof(*bn));
- 	if (bn) {
- 		mbedtls_mpi_init(bn);
-@@ -1442,6 +1503,9 @@ struct crypto_bignum *crypto_bignum_init
- 
- struct crypto_bignum *crypto_bignum_init_uint(unsigned int val)
- {
-+	if (TEST_FAIL())
-+		return NULL;
-+
-   #if 0 /*(hostap use of this interface passes int, not uint)*/
- 	val = host_to_be32(val);
- 	return crypto_bignum_init_set((const u8 *)&val, sizeof(val));
-@@ -1467,6 +1531,9 @@ void crypto_bignum_deinit(struct crypto_
- int crypto_bignum_to_bin(const struct crypto_bignum *a,
- 			 u8 *buf, size_t buflen, size_t padlen)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	size_t n = mbedtls_mpi_size((mbedtls_mpi *)a);
- 	if (n < padlen)
- 		n = padlen;
-@@ -1477,6 +1544,9 @@ int crypto_bignum_to_bin(const struct cr
- 
- int crypto_bignum_rand(struct crypto_bignum *r, const struct crypto_bignum *m)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	/*assert(r != m);*//* r must not be same as m for mbedtls_mpi_random()*/
-   #if MBEDTLS_VERSION_NUMBER >= 0x021B0000 /* mbedtls 2.27.0 */
- 	return mbedtls_mpi_random((mbedtls_mpi *)r, 0, (mbedtls_mpi *)m,
-@@ -1513,6 +1583,9 @@ int crypto_bignum_exptmod(const struct c
- 			  const struct crypto_bignum *c,
- 			  struct crypto_bignum *d)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	/* (check if input params match d; d is the result) */
- 	/* (a == d) is ok in current mbedtls implementation */
- 	if (b == d || c == d) { /*(not ok; store result in intermediate)*/
-@@ -1540,6 +1613,9 @@ int crypto_bignum_inverse(const struct c
- 			  const struct crypto_bignum *b,
- 			  struct crypto_bignum *c)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	return mbedtls_mpi_inv_mod((mbedtls_mpi *)c,
- 				   (const mbedtls_mpi *)a,
- 				   (const mbedtls_mpi *)b) ? -1 : 0;
-@@ -1549,6 +1625,9 @@ int crypto_bignum_sub(const struct crypt
- 		      const struct crypto_bignum *b,
- 		      struct crypto_bignum *c)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	return mbedtls_mpi_sub_mpi((mbedtls_mpi *)c,
- 				   (const mbedtls_mpi *)a,
- 				   (const mbedtls_mpi *)b) ? -1 : 0;
-@@ -1558,6 +1637,9 @@ int crypto_bignum_div(const struct crypt
- 		      const struct crypto_bignum *b,
- 		      struct crypto_bignum *c)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	/*(most current use of this crypto.h interface has a == c (result),
- 	 * so store result in an intermediate to avoid overwritten input)*/
- 	mbedtls_mpi R;
-@@ -1575,6 +1657,9 @@ int crypto_bignum_addmod(const struct cr
- 			 const struct crypto_bignum *c,
- 			 struct crypto_bignum *d)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	return mbedtls_mpi_add_mpi((mbedtls_mpi *)d,
- 				   (const mbedtls_mpi *)a,
- 				   (const mbedtls_mpi *)b)
-@@ -1588,6 +1673,9 @@ int crypto_bignum_mulmod(const struct cr
- 			 const struct crypto_bignum *c,
- 			 struct crypto_bignum *d)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	return mbedtls_mpi_mul_mpi((mbedtls_mpi *)d,
- 				   (const mbedtls_mpi *)a,
- 				   (const mbedtls_mpi *)b)
-@@ -1600,6 +1688,9 @@ int crypto_bignum_sqrmod(const struct cr
- 			 const struct crypto_bignum *b,
- 			 struct crypto_bignum *c)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
-   #if 1
- 	return crypto_bignum_mulmod(a, a, b, c);
-   #else
-@@ -1650,6 +1741,9 @@ int crypto_bignum_is_odd(const struct cr
- int crypto_bignum_legendre(const struct crypto_bignum *a,
- 			   const struct crypto_bignum *p)
- {
-+	if (TEST_FAIL())
-+		return -2;
-+
- 	/* Security Note:
- 	 * mbedtls_mpi_exp_mod() is not documented to run in constant time,
- 	 * though mbedtls/library/bignum.c uses constant_time_internal.h funcs.
-@@ -1702,6 +1796,9 @@ int crypto_mod_exp(const u8 *base, size_
- 		   const u8 *modulus, size_t modulus_len,
- 		   u8 *result, size_t *result_len)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	mbedtls_mpi bn_base, bn_exp, bn_modulus, bn_result;
- 	mbedtls_mpi_init(&bn_base);
- 	mbedtls_mpi_init(&bn_exp);
-@@ -1769,6 +1866,9 @@ static int crypto_mbedtls_dh_init_public
- int crypto_dh_init(u8 generator, const u8 *prime, size_t prime_len, u8 *privkey,
- 		   u8 *pubkey)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
-   #if 0 /*(crypto_dh_init() duplicated (and identical) in crypto_*.c modules)*/
- 	size_t pubkey_len, pad;
- 
-@@ -1810,6 +1910,9 @@ int crypto_dh_derive_secret(u8 generator
- 			    const u8 *pubkey, size_t pubkey_len,
- 			    u8 *secret, size_t *len)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
-   #if 0
- 	if (pubkey_len > prime_len ||
- 	    (pubkey_len == prime_len &&
-@@ -2512,6 +2615,9 @@ const struct crypto_ec_point * crypto_ec
- 
- struct crypto_ec_point *crypto_ec_point_init(struct crypto_ec *e)
- {
-+	if (TEST_FAIL())
-+		return NULL;
-+
- 	mbedtls_ecp_point *p = os_malloc(sizeof(*p));
- 	if (p != NULL)
- 		mbedtls_ecp_point_init(p);
-@@ -2536,6 +2642,9 @@ int crypto_ec_point_x(struct crypto_ec *
- int crypto_ec_point_to_bin(struct crypto_ec *e,
- 			   const struct crypto_ec_point *point, u8 *x, u8 *y)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	/* crypto.h documents crypto_ec_point_to_bin() output is big-endian */
- 	size_t len = CRYPTO_EC_plen(e);
- 	if (x) {
-@@ -2563,6 +2672,9 @@ int crypto_ec_point_to_bin(struct crypto
- struct crypto_ec_point * crypto_ec_point_from_bin(struct crypto_ec *e,
- 						  const u8 *val)
- {
-+	if (TEST_FAIL())
-+		return NULL;
-+
- 	size_t len = CRYPTO_EC_plen(e);
- 	mbedtls_ecp_point *p = os_malloc(sizeof(*p));
- 	u8 buf[1+MBEDTLS_MPI_MAX_SIZE*2];
-@@ -2615,6 +2727,9 @@ int crypto_ec_point_add(struct crypto_ec
- 			const struct crypto_ec_point *b,
- 			struct crypto_ec_point *c)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	/* mbedtls does not provide an mbedtls_ecp_point add function */
- 	mbedtls_mpi one;
- 	mbedtls_mpi_init(&one);
-@@ -2631,6 +2746,9 @@ int crypto_ec_point_mul(struct crypto_ec
- 			const struct crypto_bignum *b,
- 			struct crypto_ec_point *res)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	return mbedtls_ecp_mul(
- 		(mbedtls_ecp_group *)e, (mbedtls_ecp_point *)res,
- 		(const mbedtls_mpi *)b, (const mbedtls_ecp_point *)p,
-@@ -2639,6 +2757,9 @@ int crypto_ec_point_mul(struct crypto_ec
- 
- int crypto_ec_point_invert(struct crypto_ec *e, struct crypto_ec_point *p)
- {
-+	if (TEST_FAIL())
-+		return -1;
-+
- 	if (mbedtls_ecp_get_type((mbedtls_ecp_group *)e)
- 	    == MBEDTLS_ECP_TYPE_MONTGOMERY) {
- 		/* e.g. MBEDTLS_ECP_DP_CURVE25519 and MBEDTLS_ECP_DP_CURVE448 */
-@@ -2751,6 +2872,9 @@ struct crypto_bignum *
- crypto_ec_point_compute_y_sqr(struct crypto_ec *e,
- 			      const struct crypto_bignum *x)
- {
-+	if (TEST_FAIL())
-+		return NULL;
-+
- 	mbedtls_mpi *y2 = os_malloc(sizeof(*y2));
- 	if (y2 == NULL)
- 		return NULL;

feeds/hostapd/hostapd/patches/150-add-NULL-checks-encountered-during-tests-hwsim.patch

@@ -1,45 +0,0 @@
-From 33afce36c54b0cad38643629ded10ff5d727f077 Mon Sep 17 00:00:00 2001
-From: Glenn Strauss <gstrauss@gluelogic.com>
-Date: Fri, 12 Aug 2022 05:34:47 -0400
-Subject: [PATCH 5/7] add NULL checks (encountered during tests/hwsim)
-
-sae_derive_commit_element_ecc NULL pwe_ecc check
-dpp_gen_keypair() NULL curve check
-
-Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
----
- src/common/dpp_crypto.c | 6 ++++++
- src/common/sae.c        | 7 +++++++
- 2 files changed, 13 insertions(+)
-
---- a/src/common/dpp_crypto.c
-+++ b/src/common/dpp_crypto.c
-@@ -269,6 +269,12 @@ int dpp_get_pubkey_hash(struct crypto_ec
- 
- struct crypto_ec_key * dpp_gen_keypair(const struct dpp_curve_params *curve)
- {
-+	if (curve == NULL) {
-+		wpa_printf(MSG_DEBUG,
-+		           "DPP: %s curve must be initialized", __func__);
-+		return NULL;
-+	}
-+
- 	struct crypto_ec_key *key;
- 
- 	wpa_printf(MSG_DEBUG, "DPP: Generating a keypair");
---- a/src/common/sae.c
-+++ b/src/common/sae.c
-@@ -1278,6 +1278,13 @@ void sae_deinit_pt(struct sae_pt *pt)
- static int sae_derive_commit_element_ecc(struct sae_data *sae,
- 					 struct crypto_bignum *mask)
- {
-+	if (sae->tmp->pwe_ecc == NULL) {
-+		wpa_printf(MSG_DEBUG,
-+		           "SAE: %s sae->tmp->pwe_ecc must be initialized",
-+		           __func__);
-+		return -1;
-+	}
-+
- 	/* COMMIT-ELEMENT = inverse(scalar-op(mask, PWE)) */
- 	if (!sae->tmp->own_commit_element_ecc) {
- 		sae->tmp->own_commit_element_ecc =

feeds/hostapd/hostapd/patches/160-dpp_pkex-EC-point-mul-w-value-prime.patch

@@ -1,26 +0,0 @@
-From 54211caa2e0e5163aefef390daf88a971367a702 Mon Sep 17 00:00:00 2001
-From: Glenn Strauss <gstrauss@gluelogic.com>
-Date: Tue, 4 Oct 2022 17:09:24 -0400
-Subject: [PATCH 6/7] dpp_pkex: EC point mul w/ value < prime
-
-crypto_ec_point_mul() with mbedtls requires point
-be multiplied by a multiplicand with value < prime
-
-Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
----
- src/common/dpp_crypto.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/src/common/dpp_crypto.c
-+++ b/src/common/dpp_crypto.c
-@@ -1588,7 +1588,9 @@ dpp_pkex_derive_Qr(const struct dpp_curv
- 	Pr = crypto_ec_key_get_public_key(Pr_key);
- 	Qr = crypto_ec_point_init(ec);
- 	hash_bn = crypto_bignum_init_set(hash, curve->hash_len);
--	if (!Pr || !Qr || !hash_bn || crypto_ec_point_mul(ec, Pr, hash_bn, Qr))
-+	if (!Pr || !Qr || !hash_bn ||
-+	    crypto_bignum_mod(hash_bn, crypto_ec_get_prime(ec), hash_bn) ||
-+	    crypto_ec_point_mul(ec, Pr, hash_bn, Qr))
- 		goto fail;
- 
- 	if (crypto_ec_point_is_at_infinity(ec, Qr)) {

feeds/hostapd/hostapd/patches/170-hostapd-update-cfs0-and-cfs1-for-160MHz.patch

@@ -1,141 +0,0 @@
-From d4c4ef302f98fd6bce173b8636e7e350d8b44981 Mon Sep 17 00:00:00 2001
-From: P Praneesh <ppranees@codeaurora.org>
-Date: Fri, 19 Mar 2021 12:17:27 +0530
-Subject: [PATCH] hostapd: update cfs0 and cfs1 for 160MHz
-
-As per standard Draft P802.11ax_D8.0,( Table 26-9—Setting
-of the VHT Channel Width and VHT NSS at an HE STA
-transmitting the OM Control subfield ), center frequency of
-160MHz should be published in HT information subset 2 of
-HT information when EXT NSS BW field is enabled.
-
-If the supported number of NSS in 160MHz is at least max NSS
-support, then center_freq_seg0 indicates the center frequency of 80MHz and
-center_freq_seg1 indicates the center frequency of 160MHz.
-
-If the supported number of NSS in 160MHz is less than max NSS
-support, then center_freq_seg0 indicates the center frequency of 80MHz and
-center_freq_seg1 is 0. The center frequency of 160MHz is published in HT
-operation information element instead.
-
-Signed-off-by: P Praneesh <ppranees@codeaurora.org>
----
- hostapd/config_file.c           |  2 ++
- src/ap/ieee802_11_ht.c          |  7 +++++++
- src/ap/ieee802_11_vht.c         | 16 ++++++++++++++++
- src/common/hw_features_common.c |  1 +
- src/common/ieee802_11_defs.h    |  1 +
- 5 files changed, 27 insertions(+)
-
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -1153,6 +1153,8 @@ static int hostapd_config_vht_capab(stru
- 		conf->vht_capab |= VHT_CAP_RX_ANTENNA_PATTERN;
- 	if (os_strstr(capab, "[TX-ANTENNA-PATTERN]"))
- 		conf->vht_capab |= VHT_CAP_TX_ANTENNA_PATTERN;
-+	if (os_strstr(capab, "[EXT-NSS-BW-SUPP]"))
-+		conf->vht_capab |= VHT_CAP_EXTENDED_NSS_BW_SUPPORT;
- 	return 0;
- }
- #endif /* CONFIG_IEEE80211AC */
---- a/src/ap/ieee802_11_ht.c
-+++ b/src/ap/ieee802_11_ht.c
-@@ -82,7 +82,9 @@ u8 * hostapd_eid_ht_capabilities(struct
- u8 * hostapd_eid_ht_operation(struct hostapd_data *hapd, u8 *eid)
- {
- 	struct ieee80211_ht_operation *oper;
-+	le32 vht_capabilities_info;
- 	u8 *pos = eid;
-+	u8 chwidth;
- 
- 	if (!hapd->iconf->ieee80211n || hapd->conf->disable_11n ||
- 	    is_6ghz_op_class(hapd->iconf->op_class))
-@@ -103,6 +105,13 @@ u8 * hostapd_eid_ht_operation(struct hos
- 		oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW |
- 			HT_INFO_HT_PARAM_STA_CHNL_WIDTH;
- 
-+	vht_capabilities_info = host_to_le32(hapd->iface->current_mode->vht_capab);
-+	chwidth = hostapd_get_oper_chwidth(hapd->iconf);
-+	if (vht_capabilities_info & VHT_CAP_EXTENDED_NSS_BW_SUPPORT
-+		&& ((chwidth == CHANWIDTH_160MHZ) || (chwidth == CHANWIDTH_80P80MHZ))) {
-+		oper->operation_mode = host_to_le16(hapd->iconf->vht_oper_centr_freq_seg0_idx << 5);
-+	}
-+
- 	pos += sizeof(*oper);
- 
- 	return pos;
---- a/src/ap/ieee802_11_vht.c
-+++ b/src/ap/ieee802_11_vht.c
-@@ -25,6 +25,7 @@ u8 * hostapd_eid_vht_capabilities(struct
- 	struct ieee80211_vht_capabilities *cap;
- 	struct hostapd_hw_modes *mode = hapd->iface->current_mode;
- 	u8 *pos = eid;
-+	u8 chwidth;
- 
- 	if (!mode || is_6ghz_op_class(hapd->iconf->op_class))
- 		return eid;
-@@ -62,6 +63,17 @@ u8 * hostapd_eid_vht_capabilities(struct
- 			host_to_le32(nsts << VHT_CAP_BEAMFORMEE_STS_OFFSET);
- 	}
- 
-+	chwidth = hostapd_get_oper_chwidth(hapd->iconf);
-+	if (((host_to_le32(mode->vht_capab)) & VHT_CAP_EXTENDED_NSS_BW_SUPPORT)
-+		&& ((chwidth == CHANWIDTH_160MHZ) || (chwidth == CHANWIDTH_80P80MHZ))) {
-+		cap->vht_capabilities_info |= VHT_CAP_EXTENDED_NSS_BW_SUPPORT;
-+		cap->vht_capabilities_info &= ~(host_to_le32(VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ));
-+		cap->vht_capabilities_info &= ~(host_to_le32(VHT_CAP_SUPP_CHAN_WIDTH_160MHZ));
-+		cap->vht_capabilities_info &= ~(host_to_le32(VHT_CAP_SUPP_CHAN_WIDTH_MASK));
-+	} else {
-+		cap->vht_capabilities_info &= ~VHT_CAP_EXTENDED_NSS_BW_SUPPORT_MASK;
-+	}
-+
- 	/* Supported MCS set comes from hw */
- 	os_memcpy(&cap->vht_supported_mcs_set, mode->vht_mcs_set, 8);
- 
-@@ -74,6 +86,7 @@ u8 * hostapd_eid_vht_capabilities(struct
- u8 * hostapd_eid_vht_operation(struct hostapd_data *hapd, u8 *eid)
- {
- 	struct ieee80211_vht_operation *oper;
-+	le32 vht_capabilities_info;
- 	u8 *pos = eid;
- 	enum oper_chan_width oper_chwidth =
- 		hostapd_get_oper_chwidth(hapd->iconf);
-@@ -106,6 +119,7 @@ u8 * hostapd_eid_vht_operation(struct ho
- 	oper->vht_op_info_chan_center_freq_seg1_idx = seg1;
- 
- 	oper->vht_op_info_chwidth = oper_chwidth;
-+	vht_capabilities_info = host_to_le32(hapd->iface->current_mode->vht_capab);
- 	if (oper_chwidth == CONF_OPER_CHWIDTH_160MHZ) {
- 		/*
- 		 * Convert 160 MHz channel width to new style as interop
-@@ -119,6 +133,9 @@ u8 * hostapd_eid_vht_operation(struct ho
- 			oper->vht_op_info_chan_center_freq_seg0_idx -= 8;
- 		else
- 			oper->vht_op_info_chan_center_freq_seg0_idx += 8;
-+
-+		if (vht_capabilities_info & VHT_CAP_EXTENDED_NSS_BW_SUPPORT)
-+			oper->vht_op_info_chan_center_freq_seg1_idx = 0;
- 	} else if (oper_chwidth == CONF_OPER_CHWIDTH_80P80MHZ) {
- 		/*
- 		 * Convert 80+80 MHz channel width to new style as interop
---- a/src/common/hw_features_common.c
-+++ b/src/common/hw_features_common.c
-@@ -811,6 +811,7 @@ int ieee80211ac_cap_check(u32 hw, u32 co
- 	VHT_CAP_CHECK(VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB);
- 	VHT_CAP_CHECK(VHT_CAP_RX_ANTENNA_PATTERN);
- 	VHT_CAP_CHECK(VHT_CAP_TX_ANTENNA_PATTERN);
-+	VHT_CAP_CHECK(VHT_CAP_EXTENDED_NSS_BW_SUPPORT);
- 
- #undef VHT_CAP_CHECK
- #undef VHT_CAP_CHECK_MAX
---- a/src/common/ieee802_11_defs.h
-+++ b/src/common/ieee802_11_defs.h
-@@ -1349,6 +1349,8 @@ struct ieee80211_ampe_ie {
- #define VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB     ((u32) BIT(26) | BIT(27))
- #define VHT_CAP_RX_ANTENNA_PATTERN                  ((u32) BIT(28))
- #define VHT_CAP_TX_ANTENNA_PATTERN                  ((u32) BIT(29))
-+#define VHT_CAP_EXTENDED_NSS_BW_SUPPORT		    ((u32) BIT(30))
-+#define VHT_CAP_EXTENDED_NSS_BW_SUPPORT_MASK	    ((u32) BIT(30) | BIT(31))
- 
- #define VHT_OPMODE_CHANNEL_WIDTH_MASK		    ((u8) BIT(0) | BIT(1))
- #define VHT_OPMODE_CHANNEL_RxNSS_MASK		    ((u8) BIT(4) | BIT(5) | \

feeds/hostapd/hostapd/patches/180-driver_nl80211-fix-setting-QoS-map-on-secondary-BSSs.patch

@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 14 Sep 2023 10:53:50 +0200
-Subject: [PATCH] driver_nl80211: fix setting QoS map on secondary BSSs
-
-The setting is per-BSS, not per PHY
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -11341,7 +11341,7 @@ static int nl80211_set_qos_map(void *pri
- 	wpa_hexdump(MSG_DEBUG, "nl80211: Setting QoS Map",
- 		    qos_map_set, qos_map_set_len);
- 
--	if (!(msg = nl80211_drv_msg(drv, 0, NL80211_CMD_SET_QOS_MAP)) ||
-+	if (!(msg = nl80211_bss_msg(bss, 0, NL80211_CMD_SET_QOS_MAP)) ||
- 	    nla_put(msg, NL80211_ATTR_QOS_MAP, qos_map_set_len, qos_map_set)) {
- 		nlmsg_free(msg);
- 		return -ENOBUFS;

feeds/hostapd/hostapd/patches/181-driver_nl80211-update-drv-ifindex-on-removing-the-fi.patch

@@ -1,18 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 14 Sep 2023 11:28:03 +0200
-Subject: [PATCH] driver_nl80211: update drv->ifindex on removing the first
- BSS
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -8867,6 +8867,7 @@ static int wpa_driver_nl80211_if_remove(
- 		if (drv->first_bss->next) {
- 			drv->first_bss = drv->first_bss->next;
- 			drv->ctx = drv->first_bss->ctx;
-+			drv->ifindex = drv->first_bss->ifindex;
- 			os_free(bss);
- 		} else {
- 			wpa_printf(MSG_DEBUG, "nl80211: No second BSS to reassign context to");

feeds/hostapd/hostapd/patches/182-nl80211-move-nl80211_put_freq_params-call-outside-of.patch

@@ -1,34 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 18 Sep 2023 16:47:41 +0200
-Subject: [PATCH] nl80211: move nl80211_put_freq_params call outside of
- 802.11ax #ifdef
-
-The relevance of this call is not specific to 802.11ax, so it should be done
-even with CONFIG_IEEE80211AX disabled.
-
-Fixes: b3921db426ea ("nl80211: Add frequency info in start AP command")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -5226,6 +5226,9 @@ static int wpa_driver_nl80211_set_ap(voi
- 		nla_nest_end(msg, ftm);
- 	}
- 
-+	if (params->freq && nl80211_put_freq_params(msg, params->freq) < 0)
-+		goto fail;
-+
- #ifdef CONFIG_IEEE80211AX
- 	if (params->he_spr_ctrl) {
- 		struct nlattr *spr;
-@@ -5260,9 +5263,6 @@ static int wpa_driver_nl80211_set_ap(voi
- 		nla_nest_end(msg, spr);
- 	}
- 
--	if (params->freq && nl80211_put_freq_params(msg, params->freq) < 0)
--		goto fail;
--
- 	if (params->freq && params->freq->he_enabled) {
- 		struct nlattr *bss_color;
- 

feeds/hostapd/hostapd/patches/183-hostapd-cancel-channel_list_update_timeout-in-hostap.patch

@@ -1,28 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 20 Sep 2023 13:41:10 +0200
-Subject: [PATCH] hostapd: cancel channel_list_update_timeout in
- hostapd_cleanup_iface_partial
-
-Fixes a crash when disabling an interface during channel list update
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -569,6 +569,7 @@ static void sta_track_deinit(struct host
- void hostapd_cleanup_iface_partial(struct hostapd_iface *iface)
- {
- 	wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface);
-+	eloop_cancel_timeout(channel_list_update_timeout, iface, NULL);
- #ifdef NEED_AP_MLME
- 	hostapd_stop_setup_timers(iface);
- #endif /* NEED_AP_MLME */
-@@ -598,7 +599,6 @@ void hostapd_cleanup_iface_partial(struc
- static void hostapd_cleanup_iface(struct hostapd_iface *iface)
- {
- 	wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface);
--	eloop_cancel_timeout(channel_list_update_timeout, iface, NULL);
- 	eloop_cancel_timeout(hostapd_interface_setup_failure_handler, iface,
- 			     NULL);
- 

feeds/hostapd/hostapd/patches/200-multicall.patch

@@ -1,355 +0,0 @@
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -1,6 +1,7 @@
- ALL=hostapd hostapd_cli
- CONFIG_FILE = .config
- 
-+-include $(if $(MULTICALL), ../wpa_supplicant/.config)
- include ../src/build.rules
- 
- ifdef LIBS
-@@ -199,7 +200,8 @@ endif
- 
- ifdef CONFIG_NO_VLAN
- CFLAGS += -DCONFIG_NO_VLAN
--else
-+endif
-+ifneq ($(findstring CONFIG_NO_VLAN,$(CFLAGS)), CONFIG_NO_VLAN)
- OBJS += ../src/ap/vlan_init.o
- OBJS += ../src/ap/vlan_ifconfig.o
- OBJS += ../src/ap/vlan.o
-@@ -357,10 +359,14 @@ CFLAGS += -DCONFIG_MBO
- OBJS += ../src/ap/mbo_ap.o
- endif
- 
-+ifndef MULTICALL
-+CFLAGS += -DNO_SUPPLICANT
-+endif
-+
- include ../src/drivers/drivers.mak
--OBJS += $(DRV_AP_OBJS)
--CFLAGS += $(DRV_AP_CFLAGS)
--LDFLAGS += $(DRV_AP_LDFLAGS)
-+OBJS += $(sort $(DRV_AP_OBJS) $(if $(MULTICALL),$(DRV_WPA_OBJS)))
-+CFLAGS += $(DRV_AP_CFLAGS) $(if $(MULTICALL),$(DRV_WPA_CFLAGS))
-+LDFLAGS += $(DRV_AP_LDFLAGS) $(if $(MULTICALL),$(DRV_WPA_LDFLAGS))
- LIBS += $(DRV_AP_LIBS)
- 
- ifdef CONFIG_L2_PACKET
-@@ -1380,6 +1386,12 @@ install: $(addprefix $(DESTDIR)$(BINDIR)
- _OBJS_VAR := OBJS
- include ../src/objs.mk
- 
-+hostapd_multi.a: $(BCHECK) $(OBJS)
-+	$(Q)$(CC) -c -o hostapd_multi.o -Dmain=hostapd_main $(CFLAGS) main.c
-+	@$(E) "  CC " $<
-+	@rm -f $@
-+	@$(AR) cr $@ hostapd_multi.o $(OBJS)
-+
- hostapd: $(OBJS)
- 	$(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
- 	@$(E) "  LD " $@
-@@ -1460,6 +1472,12 @@ include ../src/objs.mk
- _OBJS_VAR := SOBJS
- include ../src/objs.mk
- 
-+dump_cflags:
-+	@printf "%s " "$(CFLAGS)"
-+
-+dump_ldflags:
-+	@printf "%s " "$(LDFLAGS) $(LIBS) $(EXTRALIBS)"
-+
- nt_password_hash: $(NOBJS)
- 	$(Q)$(CC) $(LDFLAGS) -o nt_password_hash $(NOBJS) $(LIBS_n)
- 	@$(E) "  LD " $@
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -10,6 +10,7 @@ ALL += dbus/fi.w1.wpa_supplicant1.servic
- EXTRA_TARGETS=dynamic_eap_methods
- 
- CONFIG_FILE=.config
-+-include $(if $(MULTICALL),../hostapd/.config)
- include ../src/build.rules
- 
- ifdef CONFIG_BUILD_PASN_SO
-@@ -382,7 +383,9 @@ endif
- ifdef CONFIG_IBSS_RSN
- NEED_RSN_AUTHENTICATOR=y
- CFLAGS += -DCONFIG_IBSS_RSN
-+ifndef MULTICALL
- CFLAGS += -DCONFIG_NO_VLAN
-+endif
- OBJS += ibss_rsn.o
- endif
- 
-@@ -924,6 +927,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
- CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS
- LIBS += -ldl -rdynamic
- endif
-+else
-+  ifdef MULTICALL
-+    OBJS += ../src/eap_common/eap_common.o
-+  endif
- endif
- 
- ifdef CONFIG_AP
-@@ -931,9 +938,11 @@ NEED_EAP_COMMON=y
- NEED_RSN_AUTHENTICATOR=y
- CFLAGS += -DCONFIG_AP
- OBJS += ap.o
-+ifndef MULTICALL
- CFLAGS += -DCONFIG_NO_RADIUS
- CFLAGS += -DCONFIG_NO_ACCOUNTING
- CFLAGS += -DCONFIG_NO_VLAN
-+endif
- OBJS += ../src/ap/hostapd.o
- OBJS += ../src/ap/wpa_auth_glue.o
- OBJS += ../src/ap/utils.o
-@@ -1022,6 +1031,12 @@ endif
- ifdef CONFIG_HS20
- OBJS += ../src/ap/hs20.o
- endif
-+else
-+  ifdef MULTICALL
-+    OBJS += ../src/eap_server/eap_server.o
-+    OBJS += ../src/eap_server/eap_server_identity.o
-+    OBJS += ../src/eap_server/eap_server_methods.o
-+  endif
- endif
- 
- ifdef CONFIG_MBO
-@@ -1030,7 +1045,9 @@ CFLAGS += -DCONFIG_MBO
- endif
- 
- ifdef NEED_RSN_AUTHENTICATOR
-+ifndef MULTICALL
- CFLAGS += -DCONFIG_NO_RADIUS
-+endif
- NEED_AES_WRAP=y
- OBJS += ../src/ap/wpa_auth.o
- OBJS += ../src/ap/wpa_auth_ie.o
-@@ -2010,6 +2027,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv)
- 
- _OBJS_VAR := OBJS
- include ../src/objs.mk
-+wpa_supplicant_multi.a: .config $(BCHECK) $(OBJS) $(EXTRA_progs)
-+	$(Q)$(CC) -c -o wpa_supplicant_multi.o -Dmain=wpa_supplicant_main $(CFLAGS) main.c
-+	@$(E) "  CC " $<
-+	@rm -f $@
-+	@$(AR) cr $@ wpa_supplicant_multi.o $(OBJS)
-+
- wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs)
- 	$(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
- 	@$(E) "  LD " $@
-@@ -2142,6 +2165,12 @@ eap_gpsk.so: $(SRC_EAP_GPSK)
- 	$(Q)sed -e 's|\@BINDIR\@|$(BINDIR)|g' $< >$@
- 	@$(E) "  sed" $<
- 
-+dump_cflags:
-+	@printf "%s " "$(CFLAGS)"
-+
-+dump_ldflags:
-+	@printf "%s " "$(LDFLAGS) $(LIBS) $(EXTRALIBS)"
-+
- wpa_supplicant.exe: wpa_supplicant
- 	mv -f $< $@
- wpa_cli.exe: wpa_cli
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -6667,8 +6667,8 @@ union wpa_event_data {
-  * Driver wrapper code should call this function whenever an event is received
-  * from the driver.
-  */
--void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
--			  union wpa_event_data *data);
-+extern void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event,
-+				    union wpa_event_data *data);
- 
- /**
-  * wpa_supplicant_event_global - Report a driver event for wpa_supplicant
-@@ -6680,7 +6680,7 @@ void wpa_supplicant_event(void *ctx, enu
-  * Same as wpa_supplicant_event(), but we search for the interface in
-  * wpa_global.
-  */
--void wpa_supplicant_event_global(void *ctx, enum wpa_event_type event,
-+extern void (*wpa_supplicant_event_global)(void *ctx, enum wpa_event_type event,
- 				 union wpa_event_data *data);
- 
- /*
---- a/src/ap/drv_callbacks.c
-+++ b/src/ap/drv_callbacks.c
-@@ -2184,8 +2184,8 @@ err:
- #endif /* CONFIG_OWE */
- 
- 
--void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
--			  union wpa_event_data *data)
-+void hostapd_wpa_event(void *ctx, enum wpa_event_type event,
-+		       union wpa_event_data *data)
- {
- 	struct hostapd_data *hapd = ctx;
- #ifndef CONFIG_NO_STDOUT_DEBUG
-@@ -2489,7 +2489,7 @@ void wpa_supplicant_event(void *ctx, enu
- }
- 
- 
--void wpa_supplicant_event_global(void *ctx, enum wpa_event_type event,
-+void hostapd_wpa_event_global(void *ctx, enum wpa_event_type event,
- 				 union wpa_event_data *data)
- {
- 	struct hapd_interfaces *interfaces = ctx;
---- a/wpa_supplicant/wpa_priv.c
-+++ b/wpa_supplicant/wpa_priv.c
-@@ -1039,8 +1039,8 @@ static void wpa_priv_send_ft_response(st
- }
- 
- 
--void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
--			  union wpa_event_data *data)
-+static void supplicant_event(void *ctx, enum wpa_event_type event,
-+			     union wpa_event_data *data)
- {
- 	struct wpa_priv_interface *iface = ctx;
- 
-@@ -1103,7 +1103,7 @@ void wpa_supplicant_event(void *ctx, enu
- }
- 
- 
--void wpa_supplicant_event_global(void *ctx, enum wpa_event_type event,
-+void supplicant_event_global(void *ctx, enum wpa_event_type event,
- 				 union wpa_event_data *data)
- {
- 	struct wpa_priv_global *global = ctx;
-@@ -1217,6 +1217,8 @@ int main(int argc, char *argv[])
- 	if (os_program_init())
- 		return -1;
- 
-+	wpa_supplicant_event = supplicant_event;
-+	wpa_supplicant_event_global = supplicant_event_global;
- 	wpa_priv_fd_workaround();
- 
- 	os_memset(&global, 0, sizeof(global));
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -5353,8 +5353,8 @@ static void wpas_link_reconfig(struct wp
- }
- 
- 
--void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
--			  union wpa_event_data *data)
-+void supplicant_event(void *ctx, enum wpa_event_type event,
-+		      union wpa_event_data *data)
- {
- 	struct wpa_supplicant *wpa_s = ctx;
- 	int resched;
-@@ -6272,7 +6272,7 @@ void wpa_supplicant_event(void *ctx, enu
- }
- 
- 
--void wpa_supplicant_event_global(void *ctx, enum wpa_event_type event,
-+void supplicant_event_global(void *ctx, enum wpa_event_type event,
- 				 union wpa_event_data *data)
- {
- 	struct wpa_supplicant *wpa_s;
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -7462,7 +7462,6 @@ struct wpa_interface * wpa_supplicant_ma
- 	return NULL;
- }
- 
--
- /**
-  * wpa_supplicant_match_existing - Match existing interfaces
-  * @global: Pointer to global data from wpa_supplicant_init()
-@@ -7497,6 +7496,11 @@ static int wpa_supplicant_match_existing
- 
- #endif /* CONFIG_MATCH_IFACE */
- 
-+extern void supplicant_event(void *ctx, enum wpa_event_type event,
-+			     union wpa_event_data *data);
-+
-+extern void supplicant_event_global(void *ctx, enum wpa_event_type event,
-+ 				 union wpa_event_data *data);
- 
- /**
-  * wpa_supplicant_add_iface - Add a new network interface
-@@ -7753,6 +7757,8 @@ struct wpa_global * wpa_supplicant_init(
- #ifndef CONFIG_NO_WPA_MSG
- 	wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb);
- #endif /* CONFIG_NO_WPA_MSG */
-+	wpa_supplicant_event = supplicant_event;
-+	wpa_supplicant_event_global = supplicant_event_global;
- 
- 	if (params->wpa_debug_file_path)
- 		wpa_debug_open_file(params->wpa_debug_file_path);
---- a/hostapd/main.c
-+++ b/hostapd/main.c
-@@ -698,6 +698,11 @@ fail:
- 	return -1;
- }
- 
-+void hostapd_wpa_event(void *ctx, enum wpa_event_type event,
-+                       union wpa_event_data *data);
-+
-+void hostapd_wpa_event_global(void *ctx, enum wpa_event_type event,
-+ 				 union wpa_event_data *data);
- 
- #ifdef CONFIG_WPS
- static int gen_uuid(const char *txt_addr)
-@@ -791,6 +796,8 @@ int main(int argc, char *argv[])
- 		return -1;
- #endif /* CONFIG_DPP */
- 
-+	wpa_supplicant_event = hostapd_wpa_event;
-+	wpa_supplicant_event_global = hostapd_wpa_event_global;
- 	for (;;) {
- 		c = getopt(argc, argv, "b:Bde:f:hi:KP:sSTtu:vg:G:q");
- 		if (c < 0)
---- a/src/drivers/drivers.c
-+++ b/src/drivers/drivers.c
-@@ -10,6 +10,10 @@
- #include "utils/common.h"
- #include "driver.h"
- 
-+void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event,
-+			     union wpa_event_data *data);
-+void (*wpa_supplicant_event_global)(void *ctx, enum wpa_event_type event,
-+			     union wpa_event_data *data);
- 
- const struct wpa_driver_ops *const wpa_drivers[] =
- {
---- a/wpa_supplicant/eapol_test.c
-+++ b/wpa_supplicant/eapol_test.c
-@@ -31,7 +31,12 @@
- #include "ctrl_iface.h"
- #include "pcsc_funcs.h"
- #include "wpas_glue.h"
-+#include "drivers/driver.h"
- 
-+void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event,
-+			     union wpa_event_data *data);
-+void (*wpa_supplicant_event_global)(void *ctx, enum wpa_event_type event,
-+			     union wpa_event_data *data);
- 
- const struct wpa_driver_ops *const wpa_drivers[] = { NULL };
- 
-@@ -1303,6 +1308,10 @@ static void usage(void)
- 	       "option several times.\n");
- }
- 
-+extern void supplicant_event(void *ctx, enum wpa_event_type event,
-+			     union wpa_event_data *data);
-+extern void supplicant_event_global(void *ctx, enum wpa_event_type event,
-+			     union wpa_event_data *data);
- 
- int main(int argc, char *argv[])
- {
-@@ -1323,6 +1332,8 @@ int main(int argc, char *argv[])
- 	if (os_program_init())
- 		return -1;
- 
-+	wpa_supplicant_event = supplicant_event;
-+	wpa_supplicant_event_global = supplicant_event_global;
- 	hostapd_logger_register_cb(hostapd_logger_cb);
- 
- 	os_memset(&eapol_test, 0, sizeof(eapol_test));

feeds/hostapd/hostapd/patches/300-noscan.patch

@@ -1,58 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -3448,6 +3448,10 @@ static int hostapd_config_fill(struct ho
- 		if (bss->ocv && !bss->ieee80211w)
- 			bss->ieee80211w = 1;
- #endif /* CONFIG_OCV */
-+	} else if (os_strcmp(buf, "noscan") == 0) {
-+		conf->noscan = atoi(pos);
-+	} else if (os_strcmp(buf, "ht_coex") == 0) {
-+		conf->no_ht_coex = !atoi(pos);
- 	} else if (os_strcmp(buf, "ieee80211n") == 0) {
- 		conf->ieee80211n = atoi(pos);
- 	} else if (os_strcmp(buf, "ht_capab") == 0) {
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -1075,6 +1075,8 @@ struct hostapd_config {
- 
- 	int ht_op_mode_fixed;
- 	u16 ht_capab;
-+	int noscan;
-+	int no_ht_coex;
- 	int ieee80211n;
- 	int secondary_channel;
- 	int no_pri_sec_switch;
---- a/src/ap/hw_features.c
-+++ b/src/ap/hw_features.c
-@@ -546,7 +546,8 @@ static int ieee80211n_check_40mhz(struct
- 	int ret;
- 
- 	/* Check that HT40 is used and PRI / SEC switch is allowed */
--	if (!iface->conf->secondary_channel || iface->conf->no_pri_sec_switch)
-+	if (!iface->conf->secondary_channel || iface->conf->no_pri_sec_switch ||
-+		iface->conf->noscan)
- 		return 0;
- 
- 	hostapd_set_state(iface, HAPD_IFACE_HT_SCAN);
---- a/src/ap/ieee802_11_ht.c
-+++ b/src/ap/ieee802_11_ht.c
-@@ -239,6 +239,9 @@ void hostapd_2040_coex_action(struct hos
- 		return;
- 	}
- 
-+	if (iface->conf->noscan || iface->conf->no_ht_coex)
-+		return;
-+
- 	if (len < IEEE80211_HDRLEN + 2 + sizeof(*bc_ie)) {
- 		wpa_printf(MSG_DEBUG,
- 			   "Ignore too short 20/40 BSS Coexistence Management frame");
-@@ -399,6 +402,9 @@ void ht40_intolerant_add(struct hostapd_
- 	if (iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
- 		return;
- 
-+	if (iface->conf->noscan || iface->conf->no_ht_coex)
-+		return;
-+
- 	wpa_printf(MSG_INFO, "HT: Forty MHz Intolerant is set by STA " MACSTR
- 		   " in Association Request", MAC2STR(sta->addr));
- 

feeds/hostapd/hostapd/patches/301-mesh-noscan.patch

@@ -1,71 +0,0 @@
---- a/wpa_supplicant/config.c
-+++ b/wpa_supplicant/config.c
-@@ -2600,6 +2600,7 @@ static const struct parse_data ssid_fiel
- #else /* CONFIG_MESH */
- 	{ INT_RANGE(mode, 0, 4) },
- #endif /* CONFIG_MESH */
-+	{ INT_RANGE(noscan, 0, 1) },
- 	{ INT_RANGE(proactive_key_caching, 0, 1) },
- 	{ INT_RANGE(disabled, 0, 2) },
- 	{ STR(id_str) },
---- a/wpa_supplicant/config_file.c
-+++ b/wpa_supplicant/config_file.c
-@@ -775,6 +775,7 @@ static void wpa_config_write_network(FIL
- #endif /* IEEE8021X_EAPOL */
- 	INT(mode);
- 	INT(no_auto_peer);
-+	INT(noscan);
- 	INT(mesh_fwding);
- 	INT(frequency);
- 	INT(enable_edmg);
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -506,6 +506,8 @@ static int wpa_supplicant_mesh_init(stru
- 			   frequency);
- 		goto out_free;
- 	}
-+	if (ssid->noscan)
-+		conf->noscan = 1;
- 
- 	if (ssid->mesh_basic_rates == NULL) {
- 		/*
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2710,7 +2710,7 @@ static bool ibss_mesh_can_use_vht(struct
- 				  const struct wpa_ssid *ssid,
- 				  struct hostapd_hw_modes *mode)
- {
--	if (mode->mode != HOSTAPD_MODE_IEEE80211A)
-+	if (mode->mode != HOSTAPD_MODE_IEEE80211A && !(ssid->noscan))
- 		return false;
- 
- 	if (!drv_supports_vht(wpa_s, ssid))
-@@ -2783,7 +2783,7 @@ static void ibss_mesh_select_40mhz(struc
- 	int i, res;
- 	unsigned int j;
- 	static const int ht40plus[] = {
--		36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157, 165, 173,
-+		1, 2, 3, 4, 5, 6, 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157, 165, 173,
- 		184, 192
- 	};
- 	int ht40 = -1;
-@@ -3033,7 +3033,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
- 	int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode);
- 	enum hostapd_hw_mode hw_mode;
- 	struct hostapd_hw_modes *mode = NULL;
--	int i, obss_scan = 1;
-+	int i, obss_scan = !(ssid->noscan);
- 	u8 channel;
- 	bool is_6ghz;
- 	bool dfs_enabled = wpa_s->conf->country[0] && (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
---- a/wpa_supplicant/config_ssid.h
-+++ b/wpa_supplicant/config_ssid.h
-@@ -1035,6 +1035,8 @@ struct wpa_ssid {
- 	 */
- 	int no_auto_peer;
- 
-+	int noscan;
-+
- 	/**
- 	 * mesh_rssi_threshold - Set mesh parameter mesh_rssi_threshold (dBm)
- 	 *

feeds/hostapd/hostapd/patches/310-rescan_immediately.patch

@@ -1,11 +0,0 @@
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -5767,7 +5767,7 @@ wpa_supplicant_alloc(struct wpa_supplica
- 	if (wpa_s == NULL)
- 		return NULL;
- 	wpa_s->scan_req = INITIAL_SCAN_REQ;
--	wpa_s->scan_interval = 5;
-+	wpa_s->scan_interval = 1;
- 	wpa_s->new_connection = 1;
- 	wpa_s->parent = parent ? parent : wpa_s;
- 	wpa_s->p2pdev = wpa_s->parent;

feeds/hostapd/hostapd/patches/320-optional_rfkill.patch

@@ -1,61 +0,0 @@
---- a/src/drivers/drivers.mak
-+++ b/src/drivers/drivers.mak
-@@ -54,7 +54,6 @@ NEED_SME=y
- NEED_AP_MLME=y
- NEED_NETLINK=y
- NEED_LINUX_IOCTL=y
--NEED_RFKILL=y
- NEED_RADIOTAP=y
- NEED_LIBNL=y
- endif
-@@ -111,7 +110,6 @@ DRV_WPA_CFLAGS += -DCONFIG_DRIVER_WEXT
- CONFIG_WIRELESS_EXTENSION=y
- NEED_NETLINK=y
- NEED_LINUX_IOCTL=y
--NEED_RFKILL=y
- endif
- 
- ifdef CONFIG_DRIVER_NDIS
-@@ -137,7 +135,6 @@ endif
- ifdef CONFIG_WIRELESS_EXTENSION
- DRV_WPA_CFLAGS += -DCONFIG_WIRELESS_EXTENSION
- DRV_WPA_OBJS += ../src/drivers/driver_wext.o
--NEED_RFKILL=y
- endif
- 
- ifdef NEED_NETLINK
-@@ -146,6 +143,7 @@ endif
- 
- ifdef NEED_RFKILL
- DRV_OBJS += ../src/drivers/rfkill.o
-+DRV_WPA_CFLAGS += -DCONFIG_RFKILL
- endif
- 
- ifdef NEED_RADIOTAP
---- a/src/drivers/rfkill.h
-+++ b/src/drivers/rfkill.h
-@@ -18,8 +18,24 @@ struct rfkill_config {
- 	void (*unblocked_cb)(void *ctx);
- };
- 
-+#ifdef CONFIG_RFKILL
- struct rfkill_data * rfkill_init(struct rfkill_config *cfg);
- void rfkill_deinit(struct rfkill_data *rfkill);
- int rfkill_is_blocked(struct rfkill_data *rfkill);
-+#else
-+static inline struct rfkill_data * rfkill_init(struct rfkill_config *cfg)
-+{
-+	return (void *) 1;
-+}
-+
-+static inline void rfkill_deinit(struct rfkill_data *rfkill)
-+{
-+}
-+
-+static inline int rfkill_is_blocked(struct rfkill_data *rfkill)
-+{
-+	return 0;
-+}
-+#endif
- 
- #endif /* RFKILL_H */

feeds/hostapd/hostapd/patches/330-nl80211_fix_set_freq.patch

@@ -1,11 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -5407,7 +5407,7 @@ static int nl80211_set_channel(struct i8
- 		   freq->he_enabled, freq->eht_enabled, freq->bandwidth,
- 		   freq->center_freq1, freq->center_freq2);
- 
--	msg = nl80211_drv_msg(drv, 0, set_chan ? NL80211_CMD_SET_CHANNEL :
-+	msg = nl80211_bss_msg(bss, 0, set_chan ? NL80211_CMD_SET_CHANNEL :
- 			      NL80211_CMD_SET_WIPHY);
- 	if (!msg || nl80211_put_freq_params(msg, freq) < 0) {
- 		nlmsg_free(msg);

feeds/hostapd/hostapd/patches/341-mesh-ctrl-iface-channel-switch.patch

@@ -1,39 +0,0 @@
---- a/wpa_supplicant/ap.c
-+++ b/wpa_supplicant/ap.c
-@@ -1825,15 +1825,35 @@ int ap_switch_channel(struct wpa_supplic
- 
- 
- #ifdef CONFIG_CTRL_IFACE
-+
-+static int __ap_ctrl_iface_chanswitch(struct hostapd_iface *iface,
-+				      struct csa_settings *settings)
-+{
-+#ifdef NEED_AP_MLME
-+	if (!iface || !iface->bss[0])
-+		return 0;
-+
-+	return hostapd_switch_channel(iface->bss[0], settings);
-+#else
-+	return -1;
-+#endif
-+}
-+
-+
- int ap_ctrl_iface_chanswitch(struct wpa_supplicant *wpa_s, const char *pos)
- {
- 	struct csa_settings settings;
- 	int ret = hostapd_parse_csa_settings(pos, &settings);
- 
-+	if (!(wpa_s->ap_iface && wpa_s->ap_iface->bss[0]) &&
-+	    !(wpa_s->ifmsh && wpa_s->ifmsh->bss[0]))
-+		return -1;
-+
-+	ret = __ap_ctrl_iface_chanswitch(wpa_s->ap_iface, &settings);
- 	if (ret)
- 		return ret;
- 
--	return ap_switch_channel(wpa_s, &settings);
-+	return __ap_ctrl_iface_chanswitch(wpa_s->ifmsh, &settings);
- }
- #endif /* CONFIG_CTRL_IFACE */
- 

feeds/hostapd/hostapd/patches/350-nl80211_del_beacon_bss.patch

@@ -1,35 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -3008,12 +3008,12 @@ static int wpa_driver_nl80211_del_beacon
- 		return 0;
- 
- 	wpa_printf(MSG_DEBUG, "nl80211: Remove beacon (ifindex=%d)",
--		   drv->ifindex);
-+		   bss->ifindex);
- 	link->beacon_set = 0;
- 	link->freq = 0;
- 
- 	nl80211_put_wiphy_data_ap(bss);
--	msg = nl80211_drv_msg(drv, 0, NL80211_CMD_DEL_BEACON);
-+	msg = nl80211_bss_msg(bss, 0, NL80211_CMD_DEL_BEACON);
- 	if (!msg)
- 		return -ENOBUFS;
- 
-@@ -6100,7 +6100,7 @@ static void nl80211_teardown_ap(struct i
- 		nl80211_mgmt_unsubscribe(bss, "AP teardown");
- 
- 	nl80211_put_wiphy_data_ap(bss);
--	bss->flink->beacon_set = 0;
-+	wpa_driver_nl80211_del_beacon_all(bss);
- }
- 
- 
-@@ -8859,8 +8859,6 @@ static int wpa_driver_nl80211_if_remove(
- 	} else {
- 		wpa_printf(MSG_DEBUG, "nl80211: First BSS - reassign context");
- 		nl80211_teardown_ap(bss);
--		if (!bss->added_if && !drv->first_bss->next)
--			wpa_driver_nl80211_del_beacon_all(bss);
- 		nl80211_destroy_bss(bss);
- 		if (!bss->added_if)
- 			i802_set_iface_flags(bss, 0);

feeds/hostapd/hostapd/patches/380-disable_ctrl_iface_mib.patch

@@ -1,239 +0,0 @@
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -221,6 +221,9 @@ endif
- ifdef CONFIG_NO_CTRL_IFACE
- CFLAGS += -DCONFIG_NO_CTRL_IFACE
- else
-+ifdef CONFIG_CTRL_IFACE_MIB
-+CFLAGS += -DCONFIG_CTRL_IFACE_MIB
-+endif
- ifeq ($(CONFIG_CTRL_IFACE), udp)
- CFLAGS += -DCONFIG_CTRL_IFACE_UDP
- else
---- a/hostapd/ctrl_iface.c
-+++ b/hostapd/ctrl_iface.c
-@@ -3314,6 +3314,7 @@ static int hostapd_ctrl_iface_receive_pr
- 						      reply_size);
- 	} else if (os_strcmp(buf, "STATUS-DRIVER") == 0) {
- 		reply_len = hostapd_drv_status(hapd, reply, reply_size);
-+#ifdef CONFIG_CTRL_IFACE_MIB
- 	} else if (os_strcmp(buf, "MIB") == 0) {
- 		reply_len = ieee802_11_get_mib(hapd, reply, reply_size);
- 		if (reply_len >= 0) {
-@@ -3355,6 +3356,7 @@ static int hostapd_ctrl_iface_receive_pr
- 	} else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
- 		reply_len = hostapd_ctrl_iface_sta_next(hapd, buf + 9, reply,
- 							reply_size);
-+#endif
- 	} else if (os_strcmp(buf, "ATTACH") == 0) {
- 		if (hostapd_ctrl_iface_attach(hapd, from, fromlen, NULL))
- 			reply_len = -1;
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -983,6 +983,9 @@ ifdef CONFIG_FILS
- OBJS += ../src/ap/fils_hlp.o
- endif
- ifdef CONFIG_CTRL_IFACE
-+ifdef CONFIG_CTRL_IFACE_MIB
-+CFLAGS += -DCONFIG_CTRL_IFACE_MIB
-+endif
- OBJS += ../src/ap/ctrl_iface_ap.o
- endif
- 
---- a/wpa_supplicant/ctrl_iface.c
-+++ b/wpa_supplicant/ctrl_iface.c
-@@ -2326,7 +2326,7 @@ static int wpa_supplicant_ctrl_iface_sta
- 			pos += ret;
- 		}
- 
--#ifdef CONFIG_AP
-+#if defined(CONFIG_AP) && defined(CONFIG_CTRL_IFACE_MIB)
- 		if (wpa_s->ap_iface) {
- 			pos += ap_ctrl_iface_wpa_get_status(wpa_s, pos,
- 							    end - pos,
-@@ -12087,6 +12087,7 @@ char * wpa_supplicant_ctrl_iface_process
- 			reply_len = -1;
- 	} else if (os_strncmp(buf, "NOTE ", 5) == 0) {
- 		wpa_printf(MSG_INFO, "NOTE: %s", buf + 5);
-+#ifdef CONFIG_CTRL_IFACE_MIB
- 	} else if (os_strcmp(buf, "MIB") == 0) {
- 		reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size);
- 		if (reply_len >= 0) {
-@@ -12099,6 +12100,7 @@ char * wpa_supplicant_ctrl_iface_process
- 				reply_size - reply_len);
- #endif /* CONFIG_MACSEC */
- 		}
-+#endif
- 	} else if (os_strncmp(buf, "STATUS", 6) == 0) {
- 		reply_len = wpa_supplicant_ctrl_iface_status(
- 			wpa_s, buf + 6, reply, reply_size);
-@@ -12587,6 +12589,7 @@ char * wpa_supplicant_ctrl_iface_process
- 		reply_len = wpa_supplicant_ctrl_iface_bss(
- 			wpa_s, buf + 4, reply, reply_size);
- #ifdef CONFIG_AP
-+#ifdef CONFIG_CTRL_IFACE_MIB
- 	} else if (os_strcmp(buf, "STA-FIRST") == 0) {
- 		reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size);
- 	} else if (os_strncmp(buf, "STA ", 4) == 0) {
-@@ -12595,12 +12598,15 @@ char * wpa_supplicant_ctrl_iface_process
- 	} else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
- 		reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply,
- 						   reply_size);
-+#endif
-+#ifdef CONFIG_CTRL_IFACE_MIB
- 	} else if (os_strncmp(buf, "DEAUTHENTICATE ", 15) == 0) {
- 		if (ap_ctrl_iface_sta_deauthenticate(wpa_s, buf + 15))
- 			reply_len = -1;
- 	} else if (os_strncmp(buf, "DISASSOCIATE ", 13) == 0) {
- 		if (ap_ctrl_iface_sta_disassociate(wpa_s, buf + 13))
- 			reply_len = -1;
-+#endif
- 	} else if (os_strncmp(buf, "CHAN_SWITCH ", 12) == 0) {
- 		if (ap_ctrl_iface_chanswitch(wpa_s, buf + 12))
- 			reply_len = -1;
---- a/src/ap/ctrl_iface_ap.c
-+++ b/src/ap/ctrl_iface_ap.c
-@@ -26,6 +26,26 @@
- #include "taxonomy.h"
- #include "wnm_ap.h"
- 
-+static const char * hw_mode_str(enum hostapd_hw_mode mode)
-+{
-+	switch (mode) {
-+	case HOSTAPD_MODE_IEEE80211B:
-+		return "b";
-+	case HOSTAPD_MODE_IEEE80211G:
-+		return "g";
-+	case HOSTAPD_MODE_IEEE80211A:
-+		return "a";
-+	case HOSTAPD_MODE_IEEE80211AD:
-+		return "ad";
-+	case HOSTAPD_MODE_IEEE80211ANY:
-+		return "any";
-+	case NUM_HOSTAPD_MODES:
-+		return "invalid";
-+	}
-+	return "unknown";
-+}
-+
-+#ifdef CONFIG_CTRL_IFACE_MIB
- 
- static size_t hostapd_write_ht_mcs_bitmask(char *buf, size_t buflen,
- 					   size_t curr_len, const u8 *mcs_set)
-@@ -212,26 +232,6 @@ static const char * timeout_next_str(int
- }
- 
- 
--static const char * hw_mode_str(enum hostapd_hw_mode mode)
--{
--	switch (mode) {
--	case HOSTAPD_MODE_IEEE80211B:
--		return "b";
--	case HOSTAPD_MODE_IEEE80211G:
--		return "g";
--	case HOSTAPD_MODE_IEEE80211A:
--		return "a";
--	case HOSTAPD_MODE_IEEE80211AD:
--		return "ad";
--	case HOSTAPD_MODE_IEEE80211ANY:
--		return "any";
--	case NUM_HOSTAPD_MODES:
--		return "invalid";
--	}
--	return "unknown";
--}
--
--
- static int hostapd_ctrl_iface_sta_mib(struct hostapd_data *hapd,
- 				      struct sta_info *sta,
- 				      char *buf, size_t buflen)
-@@ -493,6 +493,7 @@ int hostapd_ctrl_iface_sta_next(struct h
- 	return hostapd_ctrl_iface_sta_mib(hapd, sta->next, buf, buflen);
- }
- 
-+#endif
- 
- #ifdef CONFIG_P2P_MANAGER
- static int p2p_manager_disconnect(struct hostapd_data *hapd, u16 stype,
-@@ -884,12 +885,12 @@ int hostapd_ctrl_iface_status(struct hos
- 			return len;
- 		len += ret;
- 	}
--
-+#ifdef CONFIG_CTRL_IFACE_MIB
- 	if (iface->conf->ieee80211n && !hapd->conf->disable_11n && mode) {
- 		len = hostapd_write_ht_mcs_bitmask(buf, buflen, len,
- 						   mode->mcs_set);
- 	}
--
-+#endif /* CONFIG_CTRL_IFACE_MIB */
- 	if (iface->current_rates && iface->num_rates) {
- 		ret = os_snprintf(buf + len, buflen - len, "supported_rates=");
- 		if (os_snprintf_error(buflen - len, ret))
---- a/src/ap/ieee802_1x.c
-+++ b/src/ap/ieee802_1x.c
-@@ -2834,6 +2834,7 @@ static const char * bool_txt(bool val)
- 	return val ? "TRUE" : "FALSE";
- }
- 
-+#ifdef CONFIG_CTRL_IFACE_MIB
- 
- int ieee802_1x_get_mib(struct hostapd_data *hapd, char *buf, size_t buflen)
- {
-@@ -3020,6 +3021,7 @@ int ieee802_1x_get_mib_sta(struct hostap
- 	return len;
- }
- 
-+#endif
- 
- #ifdef CONFIG_HS20
- static void ieee802_1x_wnm_notif_send(void *eloop_ctx, void *timeout_ctx)
---- a/src/ap/wpa_auth.c
-+++ b/src/ap/wpa_auth.c
-@@ -5328,6 +5328,7 @@ static const char * wpa_bool_txt(int val
- 	return val ? "TRUE" : "FALSE";
- }
- 
-+#ifdef CONFIG_CTRL_IFACE_MIB
- 
- #define RSN_SUITE "%02x-%02x-%02x-%d"
- #define RSN_SUITE_ARG(s) \
-@@ -5480,7 +5481,7 @@ int wpa_get_mib_sta(struct wpa_state_mac
- 
- 	return len;
- }
--
-+#endif
- 
- void wpa_auth_countermeasures_start(struct wpa_authenticator *wpa_auth)
- {
---- a/src/rsn_supp/wpa.c
-+++ b/src/rsn_supp/wpa.c
-@@ -3834,6 +3834,8 @@ static u32 wpa_key_mgmt_suite(struct wpa
- }
- 
- 
-+#ifdef CONFIG_CTRL_IFACE_MIB
-+
- #define RSN_SUITE "%02x-%02x-%02x-%d"
- #define RSN_SUITE_ARG(s) \
- ((s) >> 24) & 0xff, ((s) >> 16) & 0xff, ((s) >> 8) & 0xff, (s) & 0xff
-@@ -3915,6 +3917,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch
- 
- 	return (int) len;
- }
-+#endif
- #endif /* CONFIG_CTRL_IFACE */
- 
- 
---- a/wpa_supplicant/ap.c
-+++ b/wpa_supplicant/ap.c
-@@ -1499,7 +1499,7 @@ int wpas_ap_wps_nfc_report_handover(stru
- #endif /* CONFIG_WPS */
- 
- 
--#ifdef CONFIG_CTRL_IFACE
-+#if defined(CONFIG_CTRL_IFACE) && defined(CONFIG_CTRL_IFACE_MIB)
- 
- int ap_ctrl_iface_sta_first(struct wpa_supplicant *wpa_s,
- 			    char *buf, size_t buflen)

feeds/hostapd/hostapd/patches/381-hostapd_cli_UNKNOWN-COMMAND.patch

@@ -1,11 +0,0 @@
---- a/hostapd/hostapd_cli.c
-+++ b/hostapd/hostapd_cli.c
-@@ -757,7 +757,7 @@ static int wpa_ctrl_command_sta(struct w
- 	}
- 
- 	buf[len] = '\0';
--	if (memcmp(buf, "FAIL", 4) == 0)
-+	if (memcmp(buf, "FAIL", 4) == 0 || memcmp(buf, "UNKNOWN COMMAND", 15) == 0)
- 		return -1;
- 	if (print)
- 		printf("%s", buf);

feeds/hostapd/hostapd/patches/390-wpa_ie_cap_workaround.patch

@@ -1,56 +0,0 @@
---- a/src/common/wpa_common.c
-+++ b/src/common/wpa_common.c
-@@ -2841,6 +2841,31 @@ u32 wpa_akm_to_suite(int akm)
- }
- 
- 
-+static void wpa_fixup_wpa_ie_rsn(u8 *assoc_ie, const u8 *wpa_msg_ie,
-+				 size_t rsn_ie_len)
-+{
-+	int pos, count;
-+
-+	pos = sizeof(struct rsn_ie_hdr) + RSN_SELECTOR_LEN;
-+	if (rsn_ie_len < pos + 2)
-+		return;
-+
-+	count = WPA_GET_LE16(wpa_msg_ie + pos);
-+	pos += 2 + count * RSN_SELECTOR_LEN;
-+	if (rsn_ie_len < pos + 2)
-+		return;
-+
-+	count = WPA_GET_LE16(wpa_msg_ie + pos);
-+	pos += 2 + count * RSN_SELECTOR_LEN;
-+	if (rsn_ie_len < pos + 2)
-+		return;
-+
-+	if (!assoc_ie[pos] && !assoc_ie[pos + 1] &&
-+	    (wpa_msg_ie[pos] || wpa_msg_ie[pos + 1]))
-+		memcpy(&assoc_ie[pos], &wpa_msg_ie[pos], 2);
-+}
-+
-+
- int wpa_compare_rsn_ie(int ft_initial_assoc,
- 		       const u8 *ie1, size_t ie1len,
- 		       const u8 *ie2, size_t ie2len)
-@@ -2848,8 +2873,19 @@ int wpa_compare_rsn_ie(int ft_initial_as
- 	if (ie1 == NULL || ie2 == NULL)
- 		return -1;
- 
--	if (ie1len == ie2len && os_memcmp(ie1, ie2, ie1len) == 0)
--		return 0; /* identical IEs */
-+	if (ie1len == ie2len) {
-+		u8 *ie_tmp;
-+
-+		if (os_memcmp(ie1, ie2, ie1len) == 0)
-+			return 0; /* identical IEs */
-+
-+		ie_tmp = alloca(ie1len);
-+		memcpy(ie_tmp, ie1, ie1len);
-+		wpa_fixup_wpa_ie_rsn(ie_tmp, ie2, ie1len);
-+
-+		if (os_memcmp(ie_tmp, ie2, ie1len) == 0)
-+			return 0; /* only mismatch in RSN capabilties */
-+	}
- 
- #ifdef CONFIG_IEEE80211R
- 	if (ft_initial_assoc) {

feeds/hostapd/hostapd/patches/400-wps_single_auth_enc_type.patch

@@ -1,23 +0,0 @@
---- a/src/ap/wps_hostapd.c
-+++ b/src/ap/wps_hostapd.c
-@@ -394,9 +394,8 @@ static int hapd_wps_reconfig_in_memory(s
- 				bss->wpa_pairwise |= WPA_CIPHER_GCMP;
- 			else
- 				bss->wpa_pairwise |= WPA_CIPHER_CCMP;
--		}
- #ifndef CONFIG_NO_TKIP
--		if (cred->encr_type & WPS_ENCR_TKIP)
-+		} else if (cred->encr_type & WPS_ENCR_TKIP)
- 			bss->wpa_pairwise |= WPA_CIPHER_TKIP;
- #endif /* CONFIG_NO_TKIP */
- 		bss->rsn_pairwise = bss->wpa_pairwise;
-@@ -1181,8 +1180,7 @@ int hostapd_init_wps(struct hostapd_data
- 					  WPA_CIPHER_GCMP_256)) {
- 			wps->encr_types |= WPS_ENCR_AES;
- 			wps->encr_types_rsn |= WPS_ENCR_AES;
--		}
--		if (conf->rsn_pairwise & WPA_CIPHER_TKIP) {
-+		} else if (conf->rsn_pairwise & WPA_CIPHER_TKIP) {
- #ifdef CONFIG_NO_TKIP
- 			wpa_printf(MSG_INFO, "WPS: TKIP not supported");
- 			goto fail;

feeds/hostapd/hostapd/patches/410-limit_debug_messages.patch

@@ -1,210 +0,0 @@
---- a/src/utils/wpa_debug.c
-+++ b/src/utils/wpa_debug.c
-@@ -206,7 +206,7 @@ void wpa_debug_close_linux_tracing(void)
-  *
-  * Note: New line '\n' is added to the end of the text when printing to stdout.
-  */
--void wpa_printf(int level, const char *fmt, ...)
-+void _wpa_printf(int level, const char *fmt, ...)
- {
- 	va_list ap;
- 
-@@ -255,7 +255,7 @@ void wpa_printf(int level, const char *f
- }
- 
- 
--static void _wpa_hexdump(int level, const char *title, const u8 *buf,
-+void _wpa_hexdump(int level, const char *title, const u8 *buf,
- 			 size_t len, int show, int only_syslog)
- {
- 	size_t i;
-@@ -382,19 +382,7 @@ static void _wpa_hexdump(int level, cons
- #endif /* CONFIG_ANDROID_LOG */
- }
- 
--void wpa_hexdump(int level, const char *title, const void *buf, size_t len)
--{
--	_wpa_hexdump(level, title, buf, len, 1, 0);
--}
--
--
--void wpa_hexdump_key(int level, const char *title, const void *buf, size_t len)
--{
--	_wpa_hexdump(level, title, buf, len, wpa_debug_show_keys, 0);
--}
--
--
--static void _wpa_hexdump_ascii(int level, const char *title, const void *buf,
-+void _wpa_hexdump_ascii(int level, const char *title, const void *buf,
- 			       size_t len, int show)
- {
- 	size_t i, llen;
-@@ -507,20 +495,6 @@ file_done:
- }
- 
- 
--void wpa_hexdump_ascii(int level, const char *title, const void *buf,
--		       size_t len)
--{
--	_wpa_hexdump_ascii(level, title, buf, len, 1);
--}
--
--
--void wpa_hexdump_ascii_key(int level, const char *title, const void *buf,
--			   size_t len)
--{
--	_wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys);
--}
--
--
- #ifdef CONFIG_DEBUG_FILE
- static char *last_path = NULL;
- #endif /* CONFIG_DEBUG_FILE */
-@@ -644,7 +618,7 @@ void wpa_msg_register_ifname_cb(wpa_msg_
- }
- 
- 
--void wpa_msg(void *ctx, int level, const char *fmt, ...)
-+void _wpa_msg(void *ctx, int level, const char *fmt, ...)
- {
- 	va_list ap;
- 	char *buf;
-@@ -682,7 +656,7 @@ void wpa_msg(void *ctx, int level, const
- }
- 
- 
--void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...)
-+void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...)
- {
- 	va_list ap;
- 	char *buf;
---- a/src/utils/wpa_debug.h
-+++ b/src/utils/wpa_debug.h
-@@ -51,6 +51,17 @@ void wpa_debug_close_file(void);
- void wpa_debug_setup_stdout(void);
- void wpa_debug_stop_log(void);
- 
-+/* internal */
-+void _wpa_hexdump(int level, const char *title, const u8 *buf,
-+		  size_t len, int show, int only_syslog);
-+void _wpa_hexdump_ascii(int level, const char *title, const void *buf,
-+			size_t len, int show);
-+extern int wpa_debug_show_keys;
-+
-+#ifndef CONFIG_MSG_MIN_PRIORITY
-+#define CONFIG_MSG_MIN_PRIORITY 0
-+#endif
-+
- /**
-  * wpa_debug_printf_timestamp - Print timestamp for debug output
-  *
-@@ -71,9 +82,15 @@ void wpa_debug_print_timestamp(void);
-  *
-  * Note: New line '\n' is added to the end of the text when printing to stdout.
-  */
--void wpa_printf(int level, const char *fmt, ...)
-+void _wpa_printf(int level, const char *fmt, ...)
- PRINTF_FORMAT(2, 3);
- 
-+#define wpa_printf(level, ...)						\
-+	do {								\
-+		if (level >= CONFIG_MSG_MIN_PRIORITY)			\
-+			_wpa_printf(level, __VA_ARGS__);		\
-+	} while(0)
-+
- /**
-  * wpa_hexdump - conditional hex dump
-  * @level: priority level (MSG_*) of the message
-@@ -85,7 +102,13 @@ PRINTF_FORMAT(2, 3);
-  * output may be directed to stdout, stderr, and/or syslog based on
-  * configuration. The contents of buf is printed out has hex dump.
-  */
--void wpa_hexdump(int level, const char *title, const void *buf, size_t len);
-+static inline void wpa_hexdump(int level, const char *title, const void *buf, size_t len)
-+{
-+	if (level < CONFIG_MSG_MIN_PRIORITY)
-+		return;
-+
-+	_wpa_hexdump(level, title, buf, len, 1, 1);
-+}
- 
- static inline void wpa_hexdump_buf(int level, const char *title,
- 				   const struct wpabuf *buf)
-@@ -107,7 +130,13 @@ static inline void wpa_hexdump_buf(int l
-  * like wpa_hexdump(), but by default, does not include secret keys (passwords,
-  * etc.) in debug output.
-  */
--void wpa_hexdump_key(int level, const char *title, const void *buf, size_t len);
-+static inline void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len)
-+{
-+	if (level < CONFIG_MSG_MIN_PRIORITY)
-+		return;
-+
-+	_wpa_hexdump(level, title, buf, len, wpa_debug_show_keys, 1);
-+}
- 
- static inline void wpa_hexdump_buf_key(int level, const char *title,
- 				       const struct wpabuf *buf)
-@@ -129,8 +158,14 @@ static inline void wpa_hexdump_buf_key(i
-  * the hex numbers and ASCII characters (for printable range) are shown. 16
-  * bytes per line will be shown.
-  */
--void wpa_hexdump_ascii(int level, const char *title, const void *buf,
--		       size_t len);
-+static inline void wpa_hexdump_ascii(int level, const char *title,
-+				     const u8 *buf, size_t len)
-+{
-+	if (level < CONFIG_MSG_MIN_PRIORITY)
-+		return;
-+
-+	_wpa_hexdump_ascii(level, title, buf, len, 1);
-+}
- 
- /**
-  * wpa_hexdump_ascii_key - conditional hex dump, hide keys
-@@ -146,8 +181,14 @@ void wpa_hexdump_ascii(int level, const
-  * bytes per line will be shown. This works like wpa_hexdump_ascii(), but by
-  * default, does not include secret keys (passwords, etc.) in debug output.
-  */
--void wpa_hexdump_ascii_key(int level, const char *title, const void *buf,
--			   size_t len);
-+static inline void wpa_hexdump_ascii_key(int level, const char *title,
-+					 const u8 *buf, size_t len)
-+{
-+	if (level < CONFIG_MSG_MIN_PRIORITY)
-+		return;
-+
-+	_wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys);
-+}
- 
- /*
-  * wpa_dbg() behaves like wpa_msg(), but it can be removed from build to reduce
-@@ -184,7 +225,12 @@ void wpa_hexdump_ascii_key(int level, co
-  *
-  * Note: New line '\n' is added to the end of the text when printing to stdout.
-  */
--void wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4);
-+void _wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4);
-+#define wpa_msg(ctx, level, ...)					\
-+	do {								\
-+		if (level >= CONFIG_MSG_MIN_PRIORITY)			\
-+			_wpa_msg(ctx, level, __VA_ARGS__);		\
-+	} while(0)
- 
- /**
-  * wpa_msg_ctrl - Conditional printf for ctrl_iface monitors
-@@ -198,8 +244,13 @@ void wpa_msg(void *ctx, int level, const
-  * attached ctrl_iface monitors. In other words, it can be used for frequent
-  * events that do not need to be sent to syslog.
-  */
--void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...)
-+void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...)
- PRINTF_FORMAT(3, 4);
-+#define wpa_msg_ctrl(ctx, level, ...)					\
-+	do {								\
-+		if (level >= CONFIG_MSG_MIN_PRIORITY)			\
-+			_wpa_msg_ctrl(ctx, level, __VA_ARGS__);		\
-+	} while(0)
- 
- /**
-  * wpa_msg_global - Global printf for ctrl_iface monitors

feeds/hostapd/hostapd/patches/420-indicate-features.patch

@@ -1,63 +0,0 @@
---- a/hostapd/main.c
-+++ b/hostapd/main.c
-@@ -31,7 +31,7 @@
- #include "config_file.h"
- #include "eap_register.h"
- #include "ctrl_iface.h"
--
-+#include "build_features.h"
- 
- struct hapd_global {
- 	void **drv_priv;
-@@ -799,7 +799,7 @@ int main(int argc, char *argv[])
- 	wpa_supplicant_event = hostapd_wpa_event;
- 	wpa_supplicant_event_global = hostapd_wpa_event_global;
- 	for (;;) {
--		c = getopt(argc, argv, "b:Bde:f:hi:KP:sSTtu:vg:G:q");
-+		c = getopt(argc, argv, "b:Bde:f:hi:KP:sSTtu:g:G:qv::");
- 		if (c < 0)
- 			break;
- 		switch (c) {
-@@ -836,6 +836,8 @@ int main(int argc, char *argv[])
- 			break;
- #endif /* CONFIG_DEBUG_LINUX_TRACING */
- 		case 'v':
-+			if (optarg)
-+				exit(!has_feature(optarg));
- 			show_version();
- 			exit(1);
- 		case 'g':
---- a/wpa_supplicant/main.c
-+++ b/wpa_supplicant/main.c
-@@ -12,6 +12,7 @@
- #endif /* __linux__ */
- 
- #include "common.h"
-+#include "build_features.h"
- #include "crypto/crypto.h"
- #include "fst/fst.h"
- #include "wpa_supplicant_i.h"
-@@ -202,7 +203,7 @@ int main(int argc, char *argv[])
- 
- 	for (;;) {
- 		c = getopt(argc, argv,
--			   "b:Bc:C:D:de:f:g:G:hi:I:KLMm:No:O:p:P:qsTtuvW");
-+			   "b:Bc:C:D:de:f:g:G:hi:I:KLMm:No:O:p:P:qsTtuv::W");
- 		if (c < 0)
- 			break;
- 		switch (c) {
-@@ -302,8 +303,12 @@ int main(int argc, char *argv[])
- 			break;
- #endif /* CONFIG_CTRL_IFACE_DBUS_NEW */
- 		case 'v':
--			printf("%s\n", wpa_supplicant_version);
--			exitcode = 0;
-+			if (optarg) {
-+				exitcode = !has_feature(optarg);
-+			} else {
-+				printf("%s\n", wpa_supplicant_version);
-+				exitcode = 0;
-+			}
- 			goto out;
- 		case 'W':
- 			params.wait_for_monitor++;

feeds/hostapd/hostapd/patches/430-hostapd_cli_ifdef.patch

@@ -1,56 +0,0 @@
---- a/hostapd/hostapd_cli.c
-+++ b/hostapd/hostapd_cli.c
-@@ -401,7 +401,6 @@ static int hostapd_cli_cmd_disassociate(
- }
- 
- 
--#ifdef CONFIG_TAXONOMY
- static int hostapd_cli_cmd_signature(struct wpa_ctrl *ctrl, int argc,
- 				     char *argv[])
- {
-@@ -414,7 +413,6 @@ static int hostapd_cli_cmd_signature(str
- 	os_snprintf(buf, sizeof(buf), "SIGNATURE %s", argv[0]);
- 	return wpa_ctrl_command(ctrl, buf);
- }
--#endif /* CONFIG_TAXONOMY */
- 
- 
- static int hostapd_cli_cmd_sa_query(struct wpa_ctrl *ctrl, int argc,
-@@ -431,7 +429,6 @@ static int hostapd_cli_cmd_sa_query(stru
- }
- 
- 
--#ifdef CONFIG_WPS
- static int hostapd_cli_cmd_wps_pin(struct wpa_ctrl *ctrl, int argc,
- 				   char *argv[])
- {
-@@ -657,7 +654,6 @@ static int hostapd_cli_cmd_wps_config(st
- 			 ssid_hex, argv[1]);
- 	return wpa_ctrl_command(ctrl, buf);
- }
--#endif /* CONFIG_WPS */
- 
- 
- static int hostapd_cli_cmd_disassoc_imminent(struct wpa_ctrl *ctrl, int argc,
-@@ -1610,13 +1606,10 @@ static const struct hostapd_cli_cmd host
- 	{ "disassociate", hostapd_cli_cmd_disassociate,
- 	  hostapd_complete_stations,
- 	  "<addr> = disassociate a station" },
--#ifdef CONFIG_TAXONOMY
- 	{ "signature", hostapd_cli_cmd_signature, hostapd_complete_stations,
- 	  "<addr> = get taxonomy signature for a station" },
--#endif /* CONFIG_TAXONOMY */
- 	{ "sa_query", hostapd_cli_cmd_sa_query, hostapd_complete_stations,
- 	  "<addr> = send SA Query to a station" },
--#ifdef CONFIG_WPS
- 	{ "wps_pin", hostapd_cli_cmd_wps_pin, NULL,
- 	  "<uuid> <pin> [timeout] [addr] = add WPS Enrollee PIN" },
- 	{ "wps_check_pin", hostapd_cli_cmd_wps_check_pin, NULL,
-@@ -1641,7 +1634,6 @@ static const struct hostapd_cli_cmd host
- 	  "<SSID> <auth> <encr> <key> = configure AP" },
- 	{ "wps_get_status", hostapd_cli_cmd_wps_get_status, NULL,
- 	  "= show current WPS status" },
--#endif /* CONFIG_WPS */
- 	{ "disassoc_imminent", hostapd_cli_cmd_disassoc_imminent, NULL,
- 	  "= send Disassociation Imminent notification" },
- 	{ "ess_disassoc", hostapd_cli_cmd_ess_disassoc, NULL,

feeds/hostapd/hostapd/patches/460-wpa_supplicant-add-new-config-params-to-be-used-with.patch

@@ -1,189 +0,0 @@
-From 4bb69d15477e0f2b00e166845341dc933de47c58 Mon Sep 17 00:00:00 2001
-From: Antonio Quartulli <ordex@autistici.org>
-Date: Sun, 3 Jun 2012 18:22:56 +0200
-Subject: [PATCHv2 601/602] wpa_supplicant: add new config params to be used
- with the ibss join command
-
-Signed-hostap: Antonio Quartulli <ordex@autistici.org>
----
- src/drivers/driver.h            |    6 +++
- wpa_supplicant/config.c         |   96 +++++++++++++++++++++++++++++++++++++++
- wpa_supplicant/config_ssid.h    |    6 +++
- wpa_supplicant/wpa_supplicant.c |   23 +++++++---
- 4 files changed, 124 insertions(+), 7 deletions(-)
-
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -19,6 +19,7 @@
- 
- #define WPA_SUPPLICANT_DRIVER_VERSION 4
- 
-+#include "ap/sta_info.h"
- #include "common/defs.h"
- #include "common/ieee802_11_defs.h"
- #include "common/wpa_common.h"
-@@ -953,6 +954,9 @@ struct wpa_driver_associate_params {
- 	 * responsible for selecting with which BSS to associate. */
- 	const u8 *bssid;
- 
-+	unsigned char rates[WLAN_SUPP_RATES_MAX];
-+	int mcast_rate;
-+
- 	/**
- 	 * bssid_hint - BSSID of a proposed AP
- 	 *
---- a/wpa_supplicant/config.c
-+++ b/wpa_supplicant/config.c
-@@ -18,6 +18,7 @@
- #include "eap_peer/eap.h"
- #include "p2p/p2p.h"
- #include "fst/fst.h"
-+#include "ap/sta_info.h"
- #include "config.h"
- 
- 
-@@ -2389,6 +2390,97 @@ static char * wpa_config_write_mac_value
- #endif /* NO_CONFIG_WRITE */
- 
- 
-+static int wpa_config_parse_mcast_rate(const struct parse_data *data,
-+				       struct wpa_ssid *ssid, int line,
-+				       const char *value)
-+{
-+	ssid->mcast_rate = (int)(strtod(value, NULL) * 10);
-+
-+	return 0;
-+}
-+
-+#ifndef NO_CONFIG_WRITE
-+static char * wpa_config_write_mcast_rate(const struct parse_data *data,
-+					  struct wpa_ssid *ssid)
-+{
-+	char *value;
-+	int res;
-+
-+	if (!ssid->mcast_rate == 0)
-+		return NULL;
-+
-+	value = os_malloc(6); /* longest: 300.0 */
-+	if (value == NULL)
-+		return NULL;
-+	res = os_snprintf(value, 5, "%.1f", (double)ssid->mcast_rate / 10);
-+	if (res < 0) {
-+		os_free(value);
-+		return NULL;
-+	}
-+	return value;
-+}
-+#endif /* NO_CONFIG_WRITE */
-+
-+static int wpa_config_parse_rates(const struct parse_data *data,
-+				  struct wpa_ssid *ssid, int line,
-+				  const char *value)
-+{
-+	int i;
-+	char *pos, *r, *sptr, *end;
-+	double rate;
-+
-+	pos = (char *)value;
-+	r = strtok_r(pos, ",", &sptr);
-+	i = 0;
-+	while (pos && i < WLAN_SUPP_RATES_MAX) {
-+		rate = 0.0;
-+		if (r)
-+			rate = strtod(r, &end);
-+		ssid->rates[i] = rate * 2;
-+		if (*end != '\0' || rate * 2 != ssid->rates[i])
-+			return 1;
-+
-+		i++;
-+		r = strtok_r(NULL, ",", &sptr);
-+	}
-+
-+	return 0;
-+}
-+
-+#ifndef NO_CONFIG_WRITE
-+static char * wpa_config_write_rates(const struct parse_data *data,
-+				     struct wpa_ssid *ssid)
-+{
-+	char *value, *pos;
-+	int res, i;
-+
-+	if (ssid->rates[0] <= 0)
-+		return NULL;
-+
-+	value = os_malloc(6 * WLAN_SUPP_RATES_MAX + 1);
-+	if (value == NULL)
-+		return NULL;
-+	pos = value;
-+	for (i = 0; i < WLAN_SUPP_RATES_MAX - 1; i++) {
-+		res = os_snprintf(pos, 6, "%.1f,", (double)ssid->rates[i] / 2);
-+		if (res < 0) {
-+			os_free(value);
-+			return NULL;
-+		}
-+		pos += res;
-+	}
-+	res = os_snprintf(pos, 6, "%.1f",
-+			  (double)ssid->rates[WLAN_SUPP_RATES_MAX - 1] / 2);
-+	if (res < 0) {
-+		os_free(value);
-+		return NULL;
-+	}
-+
-+	value[6 * WLAN_SUPP_RATES_MAX] = '\0';
-+	return value;
-+}
-+#endif /* NO_CONFIG_WRITE */
-+
- /* Helper macros for network block parser */
- 
- #ifdef OFFSET
-@@ -2674,6 +2766,8 @@ static const struct parse_data ssid_fiel
- 	{ INT(ap_max_inactivity) },
- 	{ INT(dtim_period) },
- 	{ INT(beacon_int) },
-+	{ FUNC(rates) },
-+	{ FUNC(mcast_rate) },
- #ifdef CONFIG_MACSEC
- 	{ INT_RANGE(macsec_policy, 0, 1) },
- 	{ INT_RANGE(macsec_integ_only, 0, 1) },
---- a/wpa_supplicant/config_ssid.h
-+++ b/wpa_supplicant/config_ssid.h
-@@ -10,8 +10,10 @@
- #define CONFIG_SSID_H
- 
- #include "common/defs.h"
-+#include "ap/sta_info.h"
- #include "utils/list.h"
- #include "eap_peer/eap_config.h"
-+#include "drivers/nl80211_copy.h"
- 
- 
- #define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
-@@ -879,6 +881,9 @@ struct wpa_ssid {
- 	 */
- 	void *parent_cred;
- 
-+	unsigned char rates[WLAN_SUPP_RATES_MAX];
-+	double mcast_rate;
-+
- #ifdef CONFIG_MACSEC
- 	/**
- 	 * macsec_policy - Determines the policy for MACsec secure session
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -4175,6 +4175,12 @@ static void wpas_start_assoc_cb(struct w
- 			params.beacon_int = ssid->beacon_int;
- 		else
- 			params.beacon_int = wpa_s->conf->beacon_int;
-+		int i = 0;
-+		while (i < WLAN_SUPP_RATES_MAX) {
-+			params.rates[i] = ssid->rates[i];
-+			i++;
-+		}
-+		params.mcast_rate = ssid->mcast_rate;
- 	}
- 
- 	if (bss && ssid->enable_edmg)

feeds/hostapd/hostapd/patches/463-add-mcast_rate-to-11s.patch

@@ -1,68 +0,0 @@
-From: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Date: Thu, 11 May 2017 08:21:45 +0200
-Subject: [PATCH] set mcast_rate in mesh mode
-
-The wpa_supplicant code for IBSS allows to set the mcast rate. It is
-recommended to increase this value from 1 or 6 Mbit/s to something higher
-when using a mesh protocol on top which uses the multicast packet loss as
-indicator for the link quality.
-
-This setting was unfortunately not applied for mesh mode. But it would be
-beneficial when wpa_supplicant would behave similar to IBSS mode and set
-this argument during mesh join like authsae already does. At least it is
-helpful for companies/projects which are currently switching to 802.11s
-(without mesh_fwding and with mesh_ttl set to 1) as replacement for IBSS
-because newer drivers seem to support 802.11s but not IBSS anymore.
-
-Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Tested-by: Simon Wunderlich <simon.wunderlich@openmesh.com>
-
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -1827,6 +1827,7 @@ struct wpa_driver_mesh_join_params {
- #define WPA_DRIVER_MESH_FLAG_AMPE	0x00000008
- 	unsigned int flags;
- 	bool handle_dfs;
-+	int mcast_rate;
- };
- 
- struct wpa_driver_set_key_params {
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -11667,6 +11667,18 @@ static int nl80211_put_mesh_id(struct nl
- }
- 
- 
-+static int nl80211_put_mcast_rate(struct nl_msg *msg, int mcast_rate)
-+{
-+	if (mcast_rate > 0) {
-+		wpa_printf(MSG_DEBUG, "  * mcast_rate=%.1f",
-+			   (double)mcast_rate / 10);
-+		return nla_put_u32(msg, NL80211_ATTR_MCAST_RATE, mcast_rate);
-+	}
-+
-+	return 0;
-+}
-+
-+
- static int nl80211_put_mesh_config(struct nl_msg *msg,
- 				   struct wpa_driver_mesh_bss_params *params)
- {
-@@ -11728,6 +11740,7 @@ static int nl80211_join_mesh(struct i802
- 	    nl80211_put_basic_rates(msg, params->basic_rates) ||
- 	    nl80211_put_mesh_id(msg, params->meshid, params->meshid_len) ||
- 	    nl80211_put_beacon_int(msg, params->beacon_int) ||
-+	    nl80211_put_mcast_rate(msg, params->mcast_rate) ||
- 	    nl80211_put_dtim_period(msg, params->dtim_period))
- 		goto fail;
- 
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -632,6 +632,7 @@ int wpa_supplicant_join_mesh(struct wpa_
- 
- 	params->meshid = ssid->ssid;
- 	params->meshid_len = ssid->ssid_len;
-+	params->mcast_rate = ssid->mcast_rate;
- 	ibss_mesh_setup_freq(wpa_s, ssid, &params->freq);
- 	wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
- 	wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;

feeds/hostapd/hostapd/patches/464-fix-mesh-obss-check.patch

@@ -1,13 +0,0 @@
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -3040,6 +3040,10 @@ void ibss_mesh_setup_freq(struct wpa_sup
- 
- 	freq->freq = ssid->frequency;
- 
-+	if (ssid->fixed_freq) {
-+		obss_scan = 0;
-+	}
-+
- 	if (ssid->mode == WPAS_MODE_IBSS && !ssid->fixed_freq) {
- 		struct wpa_bss *bss = ibss_find_existing_bss(wpa_s, ssid);
- 

feeds/hostapd/hostapd/patches/465-hostapd-config-support-random-BSS-color.patch

@@ -1,24 +0,0 @@
-From c9304d3303d563ad6d2619f4e07864ed12f96889 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sat, 14 May 2022 21:41:03 +0200
-Subject: [PATCH] hostapd: config: support random BSS color
-
-Configure the HE BSS color to a random value in case the config defines
-a BSS color which exceeds the max BSS color (63).
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- hostapd/config_file.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -3500,6 +3500,8 @@ static int hostapd_config_fill(struct ho
- 	} else if (os_strcmp(buf, "he_bss_color") == 0) {
- 		conf->he_op.he_bss_color = atoi(pos) & 0x3f;
- 		conf->he_op.he_bss_color_disabled = 0;
-+		if (atoi(pos) > 63)
-+			conf->he_op.he_bss_color = os_random() % 63 + 1;
- 	} else if (os_strcmp(buf, "he_bss_color_partial") == 0) {
- 		conf->he_op.he_bss_color_partial = atoi(pos);
- 	} else if (os_strcmp(buf, "he_default_pe_duration") == 0) {

feeds/hostapd/hostapd/patches/470-survey_data_fallback.patch

@@ -1,30 +0,0 @@
---- a/src/ap/acs.c
-+++ b/src/ap/acs.c
-@@ -455,17 +455,17 @@ static int acs_get_bw_center_chan(int fr
- static int acs_survey_is_sufficient(struct freq_survey *survey)
- {
- 	if (!(survey->filled & SURVEY_HAS_NF)) {
-+		survey->nf = -95;
- 		wpa_printf(MSG_INFO,
- 			   "ACS: Survey for freq %d is missing noise floor",
- 			   survey->freq);
--		return 0;
- 	}
- 
- 	if (!(survey->filled & SURVEY_HAS_CHAN_TIME)) {
-+		survey->channel_time = 0;
- 		wpa_printf(MSG_INFO,
- 			   "ACS: Survey for freq %d is missing channel time",
- 			   survey->freq);
--		return 0;
- 	}
- 
- 	if (!(survey->filled & SURVEY_HAS_CHAN_TIME_BUSY) &&
-@@ -473,7 +473,6 @@ static int acs_survey_is_sufficient(stru
- 		wpa_printf(MSG_INFO,
- 			   "ACS: Survey for freq %d is missing RX and busy time (at least one is required)",
- 			   survey->freq);
--		return 0;
- 	}
- 
- 	return 1;

feeds/hostapd/hostapd/patches/500-lto-jobserver-support.patch

@@ -1,59 +0,0 @@
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -1396,7 +1396,7 @@ hostapd_multi.a: $(BCHECK) $(OBJS)
- 	@$(AR) cr $@ hostapd_multi.o $(OBJS)
- 
- hostapd: $(OBJS)
--	$(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
-+	+$(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
- 	@$(E) "  LD " $@
- 
- ifdef CONFIG_WPA_TRACE
-@@ -1407,7 +1407,7 @@ _OBJS_VAR := OBJS_c
- include ../src/objs.mk
- 
- hostapd_cli: $(OBJS_c)
--	$(Q)$(CC) $(LDFLAGS) -o hostapd_cli $(OBJS_c) $(LIBS_c)
-+	+$(Q)$(CC) $(LDFLAGS) -o hostapd_cli $(OBJS_c) $(LIBS_c)
- 	@$(E) "  LD " $@
- 
- NOBJS = nt_password_hash.o ../src/crypto/ms_funcs.o $(SHA1OBJS)
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -2037,31 +2037,31 @@ wpa_supplicant_multi.a: .config $(BCHECK
- 	@$(AR) cr $@ wpa_supplicant_multi.o $(OBJS)
- 
- wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs)
--	$(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
-+	+$(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
- 	@$(E) "  LD " $@
- 
- _OBJS_VAR := OBJS_t
- include ../src/objs.mk
- eapol_test: $(OBJS_t)
--	$(Q)$(LDO) $(LDFLAGS) -o eapol_test $(OBJS_t) $(LIBS)
-+	+$(Q)$(LDO) $(LDFLAGS) -o eapol_test $(OBJS_t) $(LIBS)
- 	@$(E) "  LD " $@
- 
- _OBJS_VAR := OBJS_t2
- include ../src/objs.mk
- preauth_test: $(OBJS_t2)
--	$(Q)$(LDO) $(LDFLAGS) -o preauth_test $(OBJS_t2) $(LIBS)
-+	+$(Q)$(LDO) $(LDFLAGS) -o preauth_test $(OBJS_t2) $(LIBS)
- 	@$(E) "  LD " $@
- 
- _OBJS_VAR := OBJS_p
- include ../src/objs.mk
- wpa_passphrase: $(OBJS_p)
--	$(Q)$(LDO) $(LDFLAGS) -o wpa_passphrase $(OBJS_p) $(LIBS_p) $(LIBS)
-+	+$(Q)$(LDO) $(LDFLAGS) -o wpa_passphrase $(OBJS_p) $(LIBS_p) $(LIBS)
- 	@$(E) "  LD " $@
- 
- _OBJS_VAR := OBJS_c
- include ../src/objs.mk
- wpa_cli: $(OBJS_c)
--	$(Q)$(LDO) $(LDFLAGS) -o wpa_cli $(OBJS_c) $(LIBS_c)
-+	+$(Q)$(LDO) $(LDFLAGS) -o wpa_cli $(OBJS_c) $(LIBS_c)
- 	@$(E) "  LD " $@
- 
- LIBCTRL += ../src/common/wpa_ctrl.o

feeds/hostapd/hostapd/patches/590-rrm-wnm-statistics.patch

@@ -1,92 +0,0 @@
---- a/src/ap/hostapd.h
-+++ b/src/ap/hostapd.h
-@@ -163,6 +163,21 @@ struct hostapd_sae_commit_queue {
- };
- 
- /**
-+ * struct hostapd_openwrt_stats - OpenWrt custom STA/AP statistics
-+ */
-+struct hostapd_openwrt_stats {
-+	struct {
-+		u64 neighbor_report_tx;
-+	} rrm;
-+
-+	struct {
-+		u64 bss_transition_query_rx;
-+		u64 bss_transition_request_tx;
-+		u64 bss_transition_response_rx;
-+	} wnm;
-+};
-+
-+/**
-  * struct hostapd_data - hostapd per-BSS data structure
-  */
- struct hostapd_data {
-@@ -182,6 +197,9 @@ struct hostapd_data {
- 
- 	struct hostapd_data *mld_first_bss;
- 
-+	/* OpenWrt specific statistics */
-+	struct hostapd_openwrt_stats openwrt_stats;
-+
- 	int num_sta; /* number of entries in sta_list */
- 	struct sta_info *sta_list; /* STA info list head */
- #define STA_HASH_SIZE 256
---- a/src/ap/wnm_ap.c
-+++ b/src/ap/wnm_ap.c
-@@ -386,6 +386,7 @@ static int ieee802_11_send_bss_trans_mgm
- 	mgmt->u.action.u.bss_tm_req.validity_interval = 1;
- 	pos = mgmt->u.action.u.bss_tm_req.variable;
- 
-+	hapd->openwrt_stats.wnm.bss_transition_request_tx++;
- 	wpa_printf(MSG_DEBUG, "WNM: Send BSS Transition Management Request to "
- 		   MACSTR " dialog_token=%u req_mode=0x%x disassoc_timer=%u "
- 		   "validity_interval=%u",
-@@ -790,10 +791,12 @@ int ieee802_11_rx_wnm_action_ap(struct h
- 					       plen);
- 		return 0;
- 	case WNM_BSS_TRANS_MGMT_QUERY:
-+		hapd->openwrt_stats.wnm.bss_transition_query_rx++;
- 		ieee802_11_rx_bss_trans_mgmt_query(hapd, mgmt->sa, payload,
- 						   plen);
- 		return 0;
- 	case WNM_BSS_TRANS_MGMT_RESP:
-+		hapd->openwrt_stats.wnm.bss_transition_response_rx++;
- 		ieee802_11_rx_bss_trans_mgmt_resp(hapd, mgmt->sa, payload,
- 						  plen);
- 		return 0;
-@@ -840,6 +843,7 @@ int wnm_send_disassoc_imminent(struct ho
- 
- 	pos = mgmt->u.action.u.bss_tm_req.variable;
- 
-+	hapd->openwrt_stats.wnm.bss_transition_request_tx++;
- 	wpa_printf(MSG_DEBUG, "WNM: Send BSS Transition Management Request frame to indicate imminent disassociation (disassoc_timer=%d) to "
- 		   MACSTR, disassoc_timer, MAC2STR(sta->addr));
- 	if (hostapd_drv_send_mlme(hapd, buf, pos - buf, 0, NULL, 0, 0) < 0) {
-@@ -921,6 +925,7 @@ int wnm_send_ess_disassoc_imminent(struc
- 		return -1;
- 	}
- 
-+	hapd->openwrt_stats.wnm.bss_transition_request_tx++;
- 	if (disassoc_timer) {
- 		/* send disassociation frame after time-out */
- 		set_disassoc_timer(hapd, sta, disassoc_timer);
-@@ -1001,6 +1006,7 @@ int wnm_send_bss_tm_req(struct hostapd_d
- 	}
- 	os_free(buf);
- 
-+	hapd->openwrt_stats.wnm.bss_transition_request_tx++;
- 	if (disassoc_timer) {
- 		/* send disassociation frame after time-out */
- 		set_disassoc_timer(hapd, sta, disassoc_timer);
---- a/src/ap/rrm.c
-+++ b/src/ap/rrm.c
-@@ -269,6 +269,8 @@ static void hostapd_send_nei_report_resp
- 		}
- 	}
- 
-+	hapd->openwrt_stats.rrm.neighbor_report_tx++;
-+
- 	hostapd_drv_send_action(hapd, hapd->iface->freq, 0, addr,
- 				wpabuf_head(buf), wpabuf_len(buf));
- 	wpabuf_free(buf);

feeds/hostapd/hostapd/patches/600-ubus_support.patch

@@ -1,738 +0,0 @@
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -166,6 +166,12 @@ OBJS += ../src/common/hw_features_common
- 
- OBJS += ../src/eapol_auth/eapol_auth_sm.o
- 
-+ifdef CONFIG_UBUS
-+CFLAGS += -DUBUS_SUPPORT
-+OBJS += ../src/utils/uloop.o
-+OBJS += ../src/ap/ubus.o
-+LIBS += -lubox -lubus
-+endif
- 
- ifdef CONFIG_CODE_COVERAGE
- CFLAGS += -O0 -fprofile-arcs -ftest-coverage
---- a/src/ap/hostapd.h
-+++ b/src/ap/hostapd.h
-@@ -18,6 +18,7 @@
- #include "utils/list.h"
- #include "ap_config.h"
- #include "drivers/driver.h"
-+#include "ubus.h"
- 
- #define OCE_STA_CFON_ENABLED(hapd) \
- 	((hapd->conf->oce & OCE_STA_CFON) && \
-@@ -184,6 +185,7 @@ struct hostapd_data {
- 	struct hostapd_iface *iface;
- 	struct hostapd_config *iconf;
- 	struct hostapd_bss_config *conf;
-+	struct hostapd_ubus_bss ubus;
- 	int interface_added; /* virtual interface added for this BSS */
- 	unsigned int started:1;
- 	unsigned int disabled:1;
-@@ -695,6 +697,7 @@ hostapd_alloc_bss_data(struct hostapd_if
- 		       struct hostapd_bss_config *bss);
- int hostapd_setup_interface(struct hostapd_iface *iface);
- int hostapd_setup_interface_complete(struct hostapd_iface *iface, int err);
-+void hostapd_set_own_neighbor_report(struct hostapd_data *hapd);
- void hostapd_interface_deinit(struct hostapd_iface *iface);
- void hostapd_interface_free(struct hostapd_iface *iface);
- struct hostapd_iface * hostapd_alloc_iface(void);
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -435,6 +435,7 @@ void hostapd_free_hapd_data(struct hosta
- 	hapd->beacon_set_done = 0;
- 
- 	wpa_printf(MSG_DEBUG, "%s(%s)", __func__, hapd->conf->iface);
-+	hostapd_ubus_free_bss(hapd);
- 	accounting_deinit(hapd);
- 	hostapd_deinit_wpa(hapd);
- 	vlan_deinit(hapd);
-@@ -1187,6 +1188,8 @@ static int hostapd_start_beacon(struct h
- 	if (hapd->driver && hapd->driver->set_operstate)
- 		hapd->driver->set_operstate(hapd->drv_priv, 1);
- 
-+	hostapd_ubus_add_bss(hapd);
-+
- 	return 0;
- }
- 
-@@ -2275,6 +2278,7 @@ static int hostapd_setup_interface_compl
- 	if (err)
- 		goto fail;
- 
-+	hostapd_ubus_add_iface(iface);
- 	wpa_printf(MSG_DEBUG, "Completing interface initialization");
- 	if (iface->freq) {
- #ifdef NEED_AP_MLME
-@@ -2494,6 +2498,7 @@ dfs_offload:
- 
- fail:
- 	wpa_printf(MSG_ERROR, "Interface initialization failed");
-+	hostapd_ubus_free_iface(iface);
- 
- 	if (iface->is_no_ir) {
- 		hostapd_set_state(iface, HAPD_IFACE_NO_IR);
-@@ -2984,6 +2989,7 @@ void hostapd_interface_deinit_free(struc
- 		   (unsigned int) iface->conf->num_bss);
- 	driver = iface->bss[0]->driver;
- 	drv_priv = iface->bss[0]->drv_priv;
-+	hostapd_ubus_free_iface(iface);
- 	hostapd_interface_deinit(iface);
- 	wpa_printf(MSG_DEBUG, "%s: driver=%p drv_priv=%p -> hapd_deinit",
- 		   __func__, driver, drv_priv);
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -2786,7 +2786,7 @@ static void handle_auth(struct hostapd_d
- 	u16 auth_alg, auth_transaction, status_code;
- 	u16 resp = WLAN_STATUS_SUCCESS;
- 	struct sta_info *sta = NULL;
--	int res, reply_res;
-+	int res, reply_res, ubus_resp;
- 	u16 fc;
- 	const u8 *challenge = NULL;
- 	u8 resp_ies[2 + WLAN_AUTH_CHALLENGE_LEN];
-@@ -2795,6 +2795,11 @@ static void handle_auth(struct hostapd_d
- 	struct radius_sta rad_info;
- 	const u8 *dst, *sa, *bssid;
- 	bool mld_sta = false;
-+	struct hostapd_ubus_request req = {
-+		.type = HOSTAPD_UBUS_AUTH_REQ,
-+		.mgmt_frame = mgmt,
-+		.ssi_signal = rssi,
-+	};
- 
- 	if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.auth)) {
- 		wpa_printf(MSG_INFO, "handle_auth - too short payload (len=%lu)",
-@@ -2986,6 +2991,13 @@ static void handle_auth(struct hostapd_d
- 		resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
- 		goto fail;
- 	}
-+	ubus_resp = hostapd_ubus_handle_event(hapd, &req);
-+	if (0 && ubus_resp) {
-+		wpa_printf(MSG_DEBUG, "Station " MACSTR " rejected by ubus handler.\n",
-+			MAC2STR(mgmt->sa));
-+		resp = ubus_resp > 0 ? (u16) ubus_resp : WLAN_STATUS_UNSPECIFIED_FAILURE;
-+		goto fail;
-+	}
- 	if (res == HOSTAPD_ACL_PENDING)
- 		return;
- 
-@@ -5161,7 +5173,7 @@ static void handle_assoc(struct hostapd_
- 	int resp = WLAN_STATUS_SUCCESS;
- 	u16 reply_res = WLAN_STATUS_UNSPECIFIED_FAILURE;
- 	const u8 *pos;
--	int left, i;
-+	int left, i, ubus_resp;
- 	struct sta_info *sta;
- 	u8 *tmp = NULL;
- #ifdef CONFIG_FILS
-@@ -5374,6 +5386,11 @@ static void handle_assoc(struct hostapd_
- 		left = res;
- 	}
- #endif /* CONFIG_FILS */
-+	struct hostapd_ubus_request req = {
-+		.type = HOSTAPD_UBUS_ASSOC_REQ,
-+		.mgmt_frame = mgmt,
-+		.ssi_signal = rssi,
-+	};
- 
- 	/* followed by SSID and Supported rates; and HT capabilities if 802.11n
- 	 * is used */
-@@ -5472,6 +5489,13 @@ static void handle_assoc(struct hostapd_
- 	}
- #endif /* CONFIG_FILS */
- 
-+	ubus_resp = hostapd_ubus_handle_event(hapd, &req);
-+	if (0 && ubus_resp) {
-+		wpa_printf(MSG_DEBUG, "Station " MACSTR " assoc rejected by ubus handler.\n",
-+		       MAC2STR(mgmt->sa));
-+		resp = ubus_resp > 0 ? (u16) ubus_resp : WLAN_STATUS_UNSPECIFIED_FAILURE;
-+		goto fail;
-+	}
-  fail:
- 
- 	/*
-@@ -5753,6 +5777,7 @@ static void handle_disassoc(struct hosta
- 			   (unsigned long) len);
- 		return;
- 	}
-+	hostapd_ubus_notify(hapd, "disassoc", mgmt->sa);
- 
- 	sta = ap_get_sta(hapd, mgmt->sa);
- 	if (!sta) {
-@@ -5784,6 +5809,8 @@ static void handle_deauth(struct hostapd
- 	/* Clear the PTKSA cache entries for PASN */
- 	ptksa_cache_flush(hapd->ptksa, mgmt->sa, WPA_CIPHER_NONE);
- 
-+	hostapd_ubus_notify(hapd, "deauth", mgmt->sa);
-+
- 	sta = ap_get_sta(hapd, mgmt->sa);
- 	if (!sta) {
- 		wpa_msg(hapd->msg_ctx, MSG_DEBUG, "Station " MACSTR
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -1036,6 +1036,12 @@ void handle_probe_req(struct hostapd_dat
- 	u16 csa_offs[2];
- 	size_t csa_offs_len;
- 	struct radius_sta rad_info;
-+	struct hostapd_ubus_request req = {
-+		.type = HOSTAPD_UBUS_PROBE_REQ,
-+		.mgmt_frame = mgmt,
-+		.ssi_signal = ssi_signal,
-+		.elems = &elems,
-+	};
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
- 	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-@@ -1222,6 +1228,12 @@ void handle_probe_req(struct hostapd_dat
- 	}
- #endif /* CONFIG_P2P */
- 
-+	if (hostapd_ubus_handle_event(hapd, &req)) {
-+		wpa_printf(MSG_DEBUG, "Probe request for " MACSTR " rejected by ubus handler.\n",
-+		       MAC2STR(mgmt->sa));
-+		return;
-+	}
-+
- 	/* TODO: verify that supp_rates contains at least one matching rate
- 	 * with AP configuration */
- 
---- a/src/ap/drv_callbacks.c
-+++ b/src/ap/drv_callbacks.c
-@@ -260,6 +260,10 @@ int hostapd_notif_assoc(struct hostapd_d
- 	u16 reason = WLAN_REASON_UNSPECIFIED;
- 	int status = WLAN_STATUS_SUCCESS;
- 	const u8 *p2p_dev_addr = NULL;
-+	struct hostapd_ubus_request req = {
-+		.type = HOSTAPD_UBUS_ASSOC_REQ,
-+		.addr = addr,
-+	};
- 
- 	if (addr == NULL) {
- 		/*
-@@ -396,6 +400,12 @@ int hostapd_notif_assoc(struct hostapd_d
- 		goto fail;
- 	}
- 
-+	if (hostapd_ubus_handle_event(hapd, &req)) {
-+		wpa_printf(MSG_DEBUG, "Station " MACSTR " assoc rejected by ubus handler.\n",
-+			   MAC2STR(req.addr));
-+		goto fail;
-+	}
-+
- #ifdef CONFIG_P2P
- 	if (elems.p2p) {
- 		wpabuf_free(sta->p2p_ie);
---- a/src/ap/sta_info.c
-+++ b/src/ap/sta_info.c
-@@ -471,6 +471,7 @@ void ap_handle_timer(void *eloop_ctx, vo
- 		hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
- 			       HOSTAPD_LEVEL_INFO, "deauthenticated due to "
- 			       "local deauth request");
-+		hostapd_ubus_notify(hapd, "local-deauth", sta->addr);
- 		ap_free_sta(hapd, sta);
- 		return;
- 	}
-@@ -626,6 +627,7 @@ skip_poll:
- 		mlme_deauthenticate_indication(
- 			hapd, sta,
- 			WLAN_REASON_PREV_AUTH_NOT_VALID);
-+		hostapd_ubus_notify(hapd, "inactive-deauth", sta->addr);
- 		ap_free_sta(hapd, sta);
- 		break;
- 	}
-@@ -1344,15 +1346,28 @@ void ap_sta_set_authorized(struct hostap
- 					sta->addr, authorized, dev_addr);
- 
- 	if (authorized) {
-+		static const char * const auth_algs[] = {
-+			[WLAN_AUTH_OPEN] = "open",
-+			[WLAN_AUTH_SHARED_KEY] = "shared",
-+			[WLAN_AUTH_FT] = "ft",
-+			[WLAN_AUTH_SAE] = "sae",
-+			[WLAN_AUTH_FILS_SK] = "fils-sk",
-+			[WLAN_AUTH_FILS_SK_PFS] = "fils-sk-pfs",
-+			[WLAN_AUTH_FILS_PK] = "fils-pk",
-+			[WLAN_AUTH_PASN] = "pasn",
-+		};
-+		const char *auth_alg = NULL;
- 		const u8 *dpp_pkhash;
- 		const char *keyid;
- 		char dpp_pkhash_buf[100];
- 		char keyid_buf[100];
- 		char ip_addr[100];
-+		char alg_buf[100];
- 
- 		dpp_pkhash_buf[0] = '\0';
- 		keyid_buf[0] = '\0';
- 		ip_addr[0] = '\0';
-+		alg_buf[0] = '\0';
- #ifdef CONFIG_P2P
- 		if (wpa_auth_get_ip_addr(sta->wpa_sm, ip_addr_buf) == 0) {
- 			os_snprintf(ip_addr, sizeof(ip_addr),
-@@ -1362,6 +1377,13 @@ void ap_sta_set_authorized(struct hostap
- 		}
- #endif /* CONFIG_P2P */
- 
-+		if (sta->auth_alg < ARRAY_SIZE(auth_algs))
-+			auth_alg = auth_algs[sta->auth_alg];
-+
-+		if (auth_alg)
-+			os_snprintf(alg_buf, sizeof(alg_buf),
-+				" auth_alg=%s", auth_alg);
-+
- 		keyid = ap_sta_wpa_get_keyid(hapd, sta);
- 		if (keyid) {
- 			os_snprintf(keyid_buf, sizeof(keyid_buf),
-@@ -1380,17 +1402,19 @@ void ap_sta_set_authorized(struct hostap
- 					 dpp_pkhash, SHA256_MAC_LEN);
- 		}
- 
--		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s%s",
--			buf, ip_addr, keyid_buf, dpp_pkhash_buf);
-+		hostapd_ubus_notify_authorized(hapd, sta);
-+		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s%s%s",
-+			buf, ip_addr, keyid_buf, dpp_pkhash_buf, alg_buf);
- 
- 		if (hapd->msg_ctx_parent &&
- 		    hapd->msg_ctx_parent != hapd->msg_ctx)
- 			wpa_msg_no_global(hapd->msg_ctx_parent, MSG_INFO,
--					  AP_STA_CONNECTED "%s%s%s%s",
-+					  AP_STA_CONNECTED "%s%s%s%s%s",
- 					  buf, ip_addr, keyid_buf,
--					  dpp_pkhash_buf);
-+					  dpp_pkhash_buf, alg_buf);
- 	} else {
- 		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_DISCONNECTED "%s", buf);
-+		hostapd_ubus_notify(hapd, "disassoc", sta->addr);
- 
- 		if (hapd->msg_ctx_parent &&
- 		    hapd->msg_ctx_parent != hapd->msg_ctx)
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -269,6 +269,7 @@ static void hostapd_wpa_auth_psk_failure
- 	struct hostapd_data *hapd = ctx;
- 	wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_POSSIBLE_PSK_MISMATCH MACSTR,
- 		MAC2STR(addr));
-+	hostapd_ubus_notify(hapd, "key-mismatch", addr);
- }
- 
- 
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -192,6 +192,13 @@ ifdef CONFIG_EAPOL_TEST
- CFLAGS += -Werror -DEAPOL_TEST
- endif
- 
-+ifdef CONFIG_UBUS
-+CFLAGS += -DUBUS_SUPPORT
-+OBJS += ubus.o
-+OBJS += ../src/utils/uloop.o
-+LIBS += -lubox -lubus
-+endif
-+
- ifdef CONFIG_CODE_COVERAGE
- CFLAGS += -O0 -fprofile-arcs -ftest-coverage
- LIBS += -lgcov
-@@ -987,6 +994,9 @@ ifdef CONFIG_CTRL_IFACE_MIB
- CFLAGS += -DCONFIG_CTRL_IFACE_MIB
- endif
- OBJS += ../src/ap/ctrl_iface_ap.o
-+ifdef CONFIG_UBUS
-+OBJS += ../src/ap/ubus.o
-+endif
- endif
- 
- CFLAGS += -DEAP_SERVER -DEAP_SERVER_IDENTITY
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -7593,6 +7593,8 @@ struct wpa_supplicant * wpa_supplicant_a
- 	}
- #endif /* CONFIG_P2P */
- 
-+	wpas_ubus_add_bss(wpa_s);
-+
- 	return wpa_s;
- }
- 
-@@ -7619,6 +7621,8 @@ int wpa_supplicant_remove_iface(struct w
- 	struct wpa_supplicant *parent = wpa_s->parent;
- #endif /* CONFIG_MESH */
- 
-+	wpas_ubus_free_bss(wpa_s);
-+
- 	/* Remove interface from the global list of interfaces */
- 	prev = global->ifaces;
- 	if (prev == wpa_s) {
-@@ -7965,8 +7969,12 @@ int wpa_supplicant_run(struct wpa_global
- 	eloop_register_signal_terminate(wpa_supplicant_terminate, global);
- 	eloop_register_signal_reconfig(wpa_supplicant_reconfig, global);
- 
-+	wpas_ubus_add(global);
-+
- 	eloop_run();
- 
-+	wpas_ubus_free(global);
-+
- 	return 0;
- }
- 
---- a/wpa_supplicant/wpa_supplicant_i.h
-+++ b/wpa_supplicant/wpa_supplicant_i.h
-@@ -21,6 +21,7 @@
- #include "config_ssid.h"
- #include "wmm_ac.h"
- #include "pasn/pasn_common.h"
-+#include "ubus.h"
- 
- extern const char *const wpa_supplicant_version;
- extern const char *const wpa_supplicant_license;
-@@ -319,6 +320,8 @@ struct wpa_global {
- #endif /* CONFIG_WIFI_DISPLAY */
- 
- 	struct psk_list_entry *add_psk; /* From group formation */
-+
-+	struct ubus_object ubus_global;
- };
- 
- 
-@@ -685,6 +688,7 @@ struct wpa_supplicant {
- 	unsigned char own_addr[ETH_ALEN];
- 	unsigned char perm_addr[ETH_ALEN];
- 	char ifname[100];
-+	struct wpas_ubus_bss ubus;
- #ifdef CONFIG_MATCH_IFACE
- 	int matched;
- #endif /* CONFIG_MATCH_IFACE */
---- a/wpa_supplicant/wps_supplicant.c
-+++ b/wpa_supplicant/wps_supplicant.c
-@@ -33,6 +33,7 @@
- #include "p2p/p2p.h"
- #include "p2p_supplicant.h"
- #include "wps_supplicant.h"
-+#include "ubus.h"
- 
- 
- #ifndef WPS_PIN_SCAN_IGNORE_SEL_REG
-@@ -402,6 +403,8 @@ static int wpa_supplicant_wps_cred(void
- 	wpa_hexdump_key(MSG_DEBUG, "WPS: Received Credential attribute",
- 			cred->cred_attr, cred->cred_attr_len);
- 
-+	wpas_ubus_notify(wpa_s, cred);
-+
- 	if (wpa_s->conf->wps_cred_processing == 1)
- 		return 0;
- 
---- a/wpa_supplicant/main.c
-+++ b/wpa_supplicant/main.c
-@@ -203,7 +203,7 @@ int main(int argc, char *argv[])
- 
- 	for (;;) {
- 		c = getopt(argc, argv,
--			   "b:Bc:C:D:de:f:g:G:hi:I:KLMm:No:O:p:P:qsTtuv::W");
-+			   "b:Bc:C:D:de:f:g:G:hi:I:KLMm:nNo:O:p:P:qsTtuv::W");
- 		if (c < 0)
- 			break;
- 		switch (c) {
-@@ -268,6 +268,9 @@ int main(int argc, char *argv[])
- 			params.conf_p2p_dev = optarg;
- 			break;
- #endif /* CONFIG_P2P */
-+		case 'n':
-+			iface_count = 0;
-+			break;
- 		case 'o':
- 			params.override_driver = optarg;
- 			break;
---- a/src/ap/rrm.c
-+++ b/src/ap/rrm.c
-@@ -89,6 +89,9 @@ static void hostapd_handle_beacon_report
- 		return;
- 	wpa_msg(hapd->msg_ctx, MSG_INFO, BEACON_RESP_RX MACSTR " %u %02x %s",
- 		MAC2STR(addr), token, rep_mode, report);
-+	if (len < sizeof(struct rrm_measurement_beacon_report))
-+		return;
-+	hostapd_ubus_notify_beacon_report(hapd, addr, token, rep_mode, (struct rrm_measurement_beacon_report*) pos, len);
- }
- 
- 
---- a/src/ap/vlan_init.c
-+++ b/src/ap/vlan_init.c
-@@ -22,6 +22,7 @@
- static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- 		       int existsok)
- {
-+	bool vlan_exists = iface_exists(vlan->ifname);
- 	int ret;
- #ifdef CONFIG_WEP
- 	int i;
-@@ -36,7 +37,7 @@ static int vlan_if_add(struct hostapd_da
- 	}
- #endif /* CONFIG_WEP */
- 
--	if (!iface_exists(vlan->ifname))
-+	if (!vlan_exists)
- 		ret = hostapd_vlan_if_add(hapd, vlan->ifname);
- 	else if (!existsok)
- 		return -1;
-@@ -51,6 +52,9 @@ static int vlan_if_add(struct hostapd_da
- 	if (hapd->wpa_auth)
- 		ret = wpa_auth_ensure_group(hapd->wpa_auth, vlan->vlan_id);
- 
-+	if (!ret && !vlan_exists)
-+		hostapd_ubus_add_vlan(hapd, vlan);
-+
- 	if (ret == 0)
- 		return ret;
- 
-@@ -77,6 +81,8 @@ int vlan_if_remove(struct hostapd_data *
- 			   "WPA deinitialization for VLAN %d failed (%d)",
- 			   vlan->vlan_id, ret);
- 
-+	hostapd_ubus_remove_vlan(hapd, vlan);
-+
- 	return hostapd_vlan_if_remove(hapd, vlan->ifname);
- }
- 
---- a/src/ap/dfs.c
-+++ b/src/ap/dfs.c
-@@ -1216,6 +1216,8 @@ int hostapd_dfs_pre_cac_expired(struct h
- 		"freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
- 		freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
- 
-+	hostapd_ubus_notify_radar_detected(iface, freq, chan_width, cf1, cf2);
-+
- 	/* Proceed only if DFS is not offloaded to the driver */
- 	if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
- 		return 0;
---- a/src/ap/airtime_policy.c
-+++ b/src/ap/airtime_policy.c
-@@ -112,8 +112,14 @@ static void set_sta_weights(struct hosta
- {
- 	struct sta_info *sta;
- 
--	for (sta = hapd->sta_list; sta; sta = sta->next)
--		sta_set_airtime_weight(hapd, sta, weight);
-+	for (sta = hapd->sta_list; sta; sta = sta->next) {
-+		unsigned int sta_weight = weight;
-+
-+		if (sta->dyn_airtime_weight)
-+			sta_weight = (weight * sta->dyn_airtime_weight) / 256;
-+
-+		sta_set_airtime_weight(hapd, sta, sta_weight);
-+	}
- }
- 
- 
-@@ -244,7 +250,10 @@ int airtime_policy_new_sta(struct hostap
- 	unsigned int weight;
- 
- 	if (hapd->iconf->airtime_mode == AIRTIME_MODE_STATIC) {
--		weight = get_weight_for_sta(hapd, sta->addr);
-+		if (sta->dyn_airtime_weight)
-+			weight = sta->dyn_airtime_weight;
-+		else
-+			weight = get_weight_for_sta(hapd, sta->addr);
- 		if (weight)
- 			return sta_set_airtime_weight(hapd, sta, weight);
- 	}
---- a/src/ap/sta_info.h
-+++ b/src/ap/sta_info.h
-@@ -322,6 +322,7 @@ struct sta_info {
- #endif /* CONFIG_TESTING_OPTIONS */
- #ifdef CONFIG_AIRTIME_POLICY
- 	unsigned int airtime_weight;
-+	unsigned int dyn_airtime_weight;
- 	struct os_reltime backlogged_until;
- #endif /* CONFIG_AIRTIME_POLICY */
- 
---- a/src/ap/wnm_ap.c
-+++ b/src/ap/wnm_ap.c
-@@ -455,7 +455,8 @@ static void ieee802_11_rx_bss_trans_mgmt
- 		MAC2STR(addr), reason, hex ? " neighbor=" : "", hex);
- 	os_free(hex);
- 
--	ieee802_11_send_bss_trans_mgmt_request(hapd, addr, dialog_token);
-+	if (!hostapd_ubus_notify_bss_transition_query(hapd, addr, dialog_token, reason, pos, end - pos))
-+		ieee802_11_send_bss_trans_mgmt_request(hapd, addr, dialog_token);
- }
- 
- 
-@@ -477,7 +478,7 @@ static void ieee802_11_rx_bss_trans_mgmt
- 					      size_t len)
- {
- 	u8 dialog_token, status_code, bss_termination_delay;
--	const u8 *pos, *end;
-+	const u8 *pos, *end, *target_bssid = NULL;
- 	int enabled = hapd->conf->bss_transition;
- 	struct sta_info *sta;
- 
-@@ -524,6 +525,7 @@ static void ieee802_11_rx_bss_trans_mgmt
- 			wpa_printf(MSG_DEBUG, "WNM: not enough room for Target BSSID field");
- 			return;
- 		}
-+		target_bssid = pos;
- 		sta->agreed_to_steer = 1;
- 		eloop_cancel_timeout(ap_sta_reset_steer_flag_timer, hapd, sta);
- 		eloop_register_timeout(2, 0, ap_sta_reset_steer_flag_timer,
-@@ -543,6 +545,10 @@ static void ieee802_11_rx_bss_trans_mgmt
- 			MAC2STR(addr), status_code, bss_termination_delay);
- 	}
- 
-+	hostapd_ubus_notify_bss_transition_response(hapd, sta->addr, dialog_token,
-+						    status_code, bss_termination_delay,
-+						    target_bssid, pos, end - pos);
-+
- 	wpa_hexdump(MSG_DEBUG, "WNM: BSS Transition Candidate List Entries",
- 		    pos, end - pos);
- }
---- a/src/utils/eloop.c
-+++ b/src/utils/eloop.c
-@@ -77,6 +77,9 @@ struct eloop_sock_table {
- struct eloop_data {
- 	int max_sock;
- 
-+	eloop_timeout_poll_handler timeout_poll_cb;
-+	eloop_poll_handler poll_cb;
-+
- 	size_t count; /* sum of all table counts */
- #ifdef CONFIG_ELOOP_POLL
- 	size_t max_pollfd_map; /* number of pollfds_map currently allocated */
-@@ -1121,6 +1124,12 @@ void eloop_run(void)
- 				os_reltime_sub(&timeout->time, &now, &tv);
- 			else
- 				tv.sec = tv.usec = 0;
-+		}
-+
-+		if (eloop.timeout_poll_cb && eloop.timeout_poll_cb(&tv, !!timeout))
-+			timeout = (void *)1;
-+
-+		if (timeout) {
- #if defined(CONFIG_ELOOP_POLL) || defined(CONFIG_ELOOP_EPOLL)
- 			timeout_ms = tv.sec * 1000 + tv.usec / 1000;
- #endif /* defined(CONFIG_ELOOP_POLL) || defined(CONFIG_ELOOP_EPOLL) */
-@@ -1190,7 +1199,8 @@ void eloop_run(void)
- 		eloop.exceptions.changed = 0;
- 
- 		eloop_process_pending_signals();
--
-+		if (eloop.poll_cb)
-+			eloop.poll_cb();
- 
- 		/* check if some registered timeouts have occurred */
- 		timeout = dl_list_first(&eloop.timeout, struct eloop_timeout,
-@@ -1252,6 +1262,14 @@ out:
- 	return;
- }
- 
-+int eloop_register_cb(eloop_poll_handler poll_cb,
-+		      eloop_timeout_poll_handler timeout_cb)
-+{
-+	eloop.poll_cb = poll_cb;
-+	eloop.timeout_poll_cb = timeout_cb;
-+
-+	return 0;
-+}
- 
- void eloop_terminate(void)
- {
---- a/src/utils/eloop.h
-+++ b/src/utils/eloop.h
-@@ -65,6 +65,9 @@ typedef void (*eloop_timeout_handler)(vo
-  */
- typedef void (*eloop_signal_handler)(int sig, void *signal_ctx);
- 
-+typedef bool (*eloop_timeout_poll_handler)(struct os_reltime *tv, bool tv_set);
-+typedef void (*eloop_poll_handler)(void);
-+
- /**
-  * eloop_init() - Initialize global event loop data
-  * Returns: 0 on success, -1 on failure
-@@ -73,6 +76,9 @@ typedef void (*eloop_signal_handler)(int
-  */
- int eloop_init(void);
- 
-+int eloop_register_cb(eloop_poll_handler poll_cb,
-+		      eloop_timeout_poll_handler timeout_cb);
-+
- /**
-  * eloop_register_read_sock - Register handler for read events
-  * @sock: File descriptor number for the socket
-@@ -320,6 +326,8 @@ int eloop_register_signal_reconfig(eloop
-  */
- int eloop_sock_requeue(void);
- 
-+void eloop_add_uloop(void);
-+
- /**
-  * eloop_run - Start the event loop
-  *
---- /dev/null
-+++ b/src/utils/uloop.c
-@@ -0,0 +1,64 @@
-+#include <libubox/uloop.h>
-+#include "includes.h"
-+#include "common.h"
-+#include "eloop.h"
-+
-+static void eloop_uloop_event_cb(int sock, void *eloop_ctx, void *sock_ctx)
-+{
-+}
-+
-+static void eloop_uloop_fd_cb(struct uloop_fd *fd, unsigned int events)
-+{
-+	unsigned int changed = events ^ fd->flags;
-+
-+	if (changed & ULOOP_READ) {
-+		if (events & ULOOP_READ)
-+			eloop_register_sock(fd->fd, EVENT_TYPE_READ, eloop_uloop_event_cb, fd, fd);
-+		else
-+			eloop_unregister_sock(fd->fd, EVENT_TYPE_READ);
-+	}
-+
-+	if (changed & ULOOP_WRITE) {
-+		if (events & ULOOP_WRITE)
-+			eloop_register_sock(fd->fd, EVENT_TYPE_WRITE, eloop_uloop_event_cb, fd, fd);
-+		else
-+			eloop_unregister_sock(fd->fd, EVENT_TYPE_WRITE);
-+	}
-+}
-+
-+static bool uloop_timeout_poll_handler(struct os_reltime *tv, bool tv_set)
-+{
-+	struct os_reltime tv_uloop;
-+	int timeout_ms = uloop_get_next_timeout();
-+
-+	if (timeout_ms < 0)
-+		return false;
-+
-+	tv_uloop.sec = timeout_ms / 1000;
-+	tv_uloop.usec = (timeout_ms % 1000) * 1000;
-+
-+	if (!tv_set || os_reltime_before(&tv_uloop, tv)) {
-+		*tv = tv_uloop;
-+		return true;
-+	}
-+
-+	return false;
-+}
-+
-+static void uloop_poll_handler(void)
-+{
-+	uloop_run_timeout(0);
-+}
-+
-+void eloop_add_uloop(void)
-+{
-+	static bool init_done = false;
-+
-+	if (!init_done) {
-+		uloop_init();
-+		uloop_fd_set_cb = eloop_uloop_fd_cb;
-+		init_done = true;
-+	}
-+
-+	eloop_register_cb(uloop_poll_handler, uloop_timeout_poll_handler);
-+}

feeds/hostapd/hostapd/patches/601-ucode_support.patch

@@ -1,723 +0,0 @@
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -168,9 +168,21 @@ OBJS += ../src/eapol_auth/eapol_auth_sm.
- 
- ifdef CONFIG_UBUS
- CFLAGS += -DUBUS_SUPPORT
--OBJS += ../src/utils/uloop.o
- OBJS += ../src/ap/ubus.o
--LIBS += -lubox -lubus
-+LIBS += -lubus
-+NEED_ULOOP:=y
-+endif
-+
-+ifdef CONFIG_UCODE
-+CFLAGS += -DUCODE_SUPPORT
-+OBJS += ../src/utils/ucode.o
-+OBJS += ../src/ap/ucode.o
-+NEED_ULOOP:=y
-+endif
-+
-+ifdef NEED_ULOOP
-+OBJS += ../src/utils/uloop.o
-+LIBS += -lubox
- endif
- 
- ifdef CONFIG_CODE_COVERAGE
---- a/hostapd/main.c
-+++ b/hostapd/main.c
-@@ -1007,6 +1007,7 @@ int main(int argc, char *argv[])
- 	}
- 
- 	hostapd_global_ctrl_iface_init(&interfaces);
-+	hostapd_ucode_init(&interfaces);
- 
- 	if (hostapd_global_run(&interfaces, daemonize, pid_file)) {
- 		wpa_printf(MSG_ERROR, "Failed to start eloop");
-@@ -1016,6 +1017,7 @@ int main(int argc, char *argv[])
- 	ret = 0;
- 
-  out:
-+	hostapd_ucode_free();
- 	hostapd_global_ctrl_iface_deinit(&interfaces);
- 	/* Deinitialize all interfaces */
- 	for (i = 0; i < interfaces.count; i++) {
---- a/src/ap/hostapd.h
-+++ b/src/ap/hostapd.h
-@@ -19,6 +19,7 @@
- #include "ap_config.h"
- #include "drivers/driver.h"
- #include "ubus.h"
-+#include "ucode.h"
- 
- #define OCE_STA_CFON_ENABLED(hapd) \
- 	((hapd->conf->oce & OCE_STA_CFON) && \
-@@ -51,6 +52,10 @@ struct hapd_interfaces {
- 	struct hostapd_config * (*config_read_cb)(const char *config_fname);
- 	int (*ctrl_iface_init)(struct hostapd_data *hapd);
- 	void (*ctrl_iface_deinit)(struct hostapd_data *hapd);
-+	int (*ctrl_iface_recv)(struct hostapd_data *hapd,
-+			       char *buf, char *reply, int reply_size,
-+			       struct sockaddr_storage *from,
-+			       socklen_t fromlen);
- 	int (*for_each_interface)(struct hapd_interfaces *interfaces,
- 				  int (*cb)(struct hostapd_iface *iface,
- 					    void *ctx), void *ctx);
-@@ -186,6 +191,7 @@ struct hostapd_data {
- 	struct hostapd_config *iconf;
- 	struct hostapd_bss_config *conf;
- 	struct hostapd_ubus_bss ubus;
-+	struct hostapd_ucode_bss ucode;
- 	int interface_added; /* virtual interface added for this BSS */
- 	unsigned int started:1;
- 	unsigned int disabled:1;
-@@ -506,6 +512,7 @@ struct hostapd_sta_info {
-  */
- struct hostapd_iface {
- 	struct hapd_interfaces *interfaces;
-+	struct hostapd_ucode_iface ucode;
- 	void *owner;
- 	char *config_fname;
- 	struct hostapd_config *conf;
-@@ -706,6 +713,8 @@ struct hostapd_iface * hostapd_init(stru
- struct hostapd_iface *
- hostapd_interface_init_bss(struct hapd_interfaces *interfaces, const char *phy,
- 			   const char *config_fname, int debug);
-+int hostapd_setup_bss(struct hostapd_data *hapd, int first, bool start_beacon);
-+void hostapd_bss_deinit(struct hostapd_data *hapd);
- void hostapd_new_assoc_sta(struct hostapd_data *hapd, struct sta_info *sta,
- 			   int reassoc);
- void hostapd_interface_deinit_free(struct hostapd_iface *iface);
-@@ -732,6 +741,7 @@ hostapd_switch_channel_fallback(struct h
- void hostapd_cleanup_cs_params(struct hostapd_data *hapd);
- void hostapd_periodic_iface(struct hostapd_iface *iface);
- int hostapd_owe_trans_get_info(struct hostapd_data *hapd);
-+void hostapd_owe_update_trans(struct hostapd_iface *iface);
- void hostapd_ocv_check_csa_sa_query(void *eloop_ctx, void *timeout_ctx);
- 
- void hostapd_switch_color(struct hostapd_data *hapd, u64 bitmap);
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -252,6 +252,8 @@ int hostapd_reload_config(struct hostapd
- 	struct hostapd_config *newconf, *oldconf;
- 	size_t j;
- 
-+	hostapd_ucode_reload_bss(hapd);
-+
- 	if (iface->config_fname == NULL) {
- 		/* Only in-memory config in use - assume it has been updated */
- 		hostapd_clear_old(iface);
-@@ -435,6 +437,7 @@ void hostapd_free_hapd_data(struct hosta
- 	hapd->beacon_set_done = 0;
- 
- 	wpa_printf(MSG_DEBUG, "%s(%s)", __func__, hapd->conf->iface);
-+	hostapd_ucode_free_bss(hapd);
- 	hostapd_ubus_free_bss(hapd);
- 	accounting_deinit(hapd);
- 	hostapd_deinit_wpa(hapd);
-@@ -538,7 +541,7 @@ void hostapd_free_hapd_data(struct hosta
-  * Most of the modules that are initialized in hostapd_setup_bss() are
-  * deinitialized here.
-  */
--static void hostapd_cleanup(struct hostapd_data *hapd)
-+void hostapd_cleanup(struct hostapd_data *hapd)
- {
- 	wpa_printf(MSG_DEBUG, "%s(hapd=%p (%s))", __func__, hapd,
- 		   hapd->conf ? hapd->conf->iface : "N/A");
-@@ -600,6 +603,7 @@ void hostapd_cleanup_iface_partial(struc
- static void hostapd_cleanup_iface(struct hostapd_iface *iface)
- {
- 	wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface);
-+	hostapd_ucode_free_iface(iface);
- 	eloop_cancel_timeout(hostapd_interface_setup_failure_handler, iface,
- 			     NULL);
- 
-@@ -1189,6 +1193,7 @@ static int hostapd_start_beacon(struct h
- 		hapd->driver->set_operstate(hapd->drv_priv, 1);
- 
- 	hostapd_ubus_add_bss(hapd);
-+	hostapd_ucode_add_bss(hapd);
- 
- 	return 0;
- }
-@@ -1211,7 +1216,7 @@ static int hostapd_start_beacon(struct h
-  * initialized. Most of the modules that are initialized here will be
-  * deinitialized in hostapd_cleanup().
-  */
--static int hostapd_setup_bss(struct hostapd_data *hapd, int first,
-+int hostapd_setup_bss(struct hostapd_data *hapd, int first,
- 			     bool start_beacon)
- {
- 	struct hostapd_bss_config *conf = hapd->conf;
-@@ -2237,7 +2242,7 @@ static int hostapd_owe_iface_iter2(struc
- #endif /* CONFIG_OWE */
- 
- 
--static void hostapd_owe_update_trans(struct hostapd_iface *iface)
-+void hostapd_owe_update_trans(struct hostapd_iface *iface)
- {
- #ifdef CONFIG_OWE
- 	/* Check whether the enabled BSS can complete OWE transition mode
-@@ -2698,7 +2703,7 @@ hostapd_alloc_bss_data(struct hostapd_if
- }
- 
- 
--static void hostapd_bss_deinit(struct hostapd_data *hapd)
-+void hostapd_bss_deinit(struct hostapd_data *hapd)
- {
- 	if (!hapd)
- 		return;
-@@ -3491,7 +3496,8 @@ int hostapd_remove_iface(struct hapd_int
- 		hapd_iface = interfaces->iface[i];
- 		if (hapd_iface == NULL)
- 			return -1;
--		if (!os_strcmp(hapd_iface->conf->bss[0]->iface, buf)) {
-+		if (!os_strcmp(hapd_iface->phy, buf) ||
-+		    !os_strcmp(hapd_iface->conf->bss[0]->iface, buf)) {
- 			wpa_printf(MSG_INFO, "Remove interface '%s'", buf);
- 			hapd_iface->driver_ap_teardown =
- 				!!(hapd_iface->drv_flags &
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -195,8 +195,20 @@ endif
- ifdef CONFIG_UBUS
- CFLAGS += -DUBUS_SUPPORT
- OBJS += ubus.o
-+LIBS += -lubus
-+NEED_ULOOP:=y
-+endif
-+
-+ifdef CONFIG_UCODE
-+CFLAGS += -DUCODE_SUPPORT
-+OBJS += ../src/utils/ucode.o
-+OBJS += ucode.o
-+NEED_ULOOP:=y
-+endif
-+
-+ifdef NEED_ULOOP
- OBJS += ../src/utils/uloop.o
--LIBS += -lubox -lubus
-+LIBS += -lubox
- endif
- 
- ifdef CONFIG_CODE_COVERAGE
-@@ -997,6 +1009,9 @@ OBJS += ../src/ap/ctrl_iface_ap.o
- ifdef CONFIG_UBUS
- OBJS += ../src/ap/ubus.o
- endif
-+ifdef CONFIG_UCODE
-+OBJS += ../src/ap/ucode.o
-+endif
- endif
- 
- CFLAGS += -DEAP_SERVER -DEAP_SERVER_IDENTITY
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -1044,6 +1044,7 @@ void wpa_supplicant_set_state(struct wpa
- 		sme_sched_obss_scan(wpa_s, 0);
- 	}
- 	wpa_s->wpa_state = state;
-+	wpas_ucode_update_state(wpa_s);
- 
- #ifdef CONFIG_BGSCAN
- 	if (state == WPA_COMPLETED && wpa_s->current_ssid != wpa_s->bgscan_ssid)
-@@ -7594,6 +7595,7 @@ struct wpa_supplicant * wpa_supplicant_a
- #endif /* CONFIG_P2P */
- 
- 	wpas_ubus_add_bss(wpa_s);
-+	wpas_ucode_add_bss(wpa_s);
- 
- 	return wpa_s;
- }
-@@ -7621,6 +7623,7 @@ int wpa_supplicant_remove_iface(struct w
- 	struct wpa_supplicant *parent = wpa_s->parent;
- #endif /* CONFIG_MESH */
- 
-+	wpas_ucode_free_bss(wpa_s);
- 	wpas_ubus_free_bss(wpa_s);
- 
- 	/* Remove interface from the global list of interfaces */
-@@ -7931,6 +7934,7 @@ struct wpa_global * wpa_supplicant_init(
- 
- 	eloop_register_timeout(WPA_SUPPLICANT_CLEANUP_INTERVAL, 0,
- 			       wpas_periodic, global, NULL);
-+	wpas_ucode_init(global);
- 
- 	return global;
- }
-@@ -7969,12 +7973,8 @@ int wpa_supplicant_run(struct wpa_global
- 	eloop_register_signal_terminate(wpa_supplicant_terminate, global);
- 	eloop_register_signal_reconfig(wpa_supplicant_reconfig, global);
- 
--	wpas_ubus_add(global);
--
- 	eloop_run();
- 
--	wpas_ubus_free(global);
--
- 	return 0;
- }
- 
-@@ -8007,6 +8007,8 @@ void wpa_supplicant_deinit(struct wpa_gl
- 
- 	wpas_notify_supplicant_deinitialized(global);
- 
-+	wpas_ucode_free();
-+
- 	eap_peer_unregister_methods();
- #ifdef CONFIG_AP
- 	eap_server_unregister_methods();
---- a/wpa_supplicant/wpa_supplicant_i.h
-+++ b/wpa_supplicant/wpa_supplicant_i.h
-@@ -22,6 +22,7 @@
- #include "wmm_ac.h"
- #include "pasn/pasn_common.h"
- #include "ubus.h"
-+#include "ucode.h"
- 
- extern const char *const wpa_supplicant_version;
- extern const char *const wpa_supplicant_license;
-@@ -689,6 +690,7 @@ struct wpa_supplicant {
- 	unsigned char perm_addr[ETH_ALEN];
- 	char ifname[100];
- 	struct wpas_ubus_bss ubus;
-+	struct wpas_ucode_bss ucode;
- #ifdef CONFIG_MATCH_IFACE
- 	int matched;
- #endif /* CONFIG_MATCH_IFACE */
---- a/hostapd/ctrl_iface.c
-+++ b/hostapd/ctrl_iface.c
-@@ -4856,6 +4856,7 @@ try_again:
- 		return -1;
- 	}
- 
-+	interface->ctrl_iface_recv = hostapd_ctrl_iface_receive_process;
- 	wpa_msg_register_cb(hostapd_ctrl_iface_msg_cb);
- 
- 	return 0;
-@@ -4957,6 +4958,7 @@ fail:
- 	os_free(fname);
- 
- 	interface->global_ctrl_sock = s;
-+	interface->ctrl_iface_recv = hostapd_ctrl_iface_receive_process;
- 	eloop_register_read_sock(s, hostapd_global_ctrl_iface_receive,
- 				 interface, NULL);
- 
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -3787,6 +3787,25 @@ struct wpa_driver_ops {
- 			 const char *ifname);
- 
- 	/**
-+	 * if_rename - Rename a virtual interface
-+	 * @priv: Private driver interface data
-+	 * @type: Interface type
-+	 * @ifname: Interface name of the virtual interface to be renamed
-+	 *	    (NULL when renaming the AP BSS interface)
-+	 * @new_name: New interface name of the virtual interface
-+	 * Returns: 0 on success, -1 on failure
-+	 */
-+	int (*if_rename)(void *priv, enum wpa_driver_if_type type,
-+			 const char *ifname, const char *new_name);
-+
-+	/**
-+	 * set_first_bss - Make a virtual interface the first (primary) bss
-+	 * @priv: Private driver interface data
-+	 * Returns: 0 on success, -1 on failure
-+	 */
-+	int (*set_first_bss)(void *priv);
-+
-+	/**
- 	 * set_sta_vlan - Bind a station into a specific interface (AP only)
- 	 * @priv: Private driver interface data
- 	 * @ifname: Interface (main or virtual BSS or VLAN)
-@@ -6440,6 +6459,7 @@ union wpa_event_data {
- 
- 	/**
- 	 * struct ch_switch
-+	 * @count: Count until channel switch activates
- 	 * @freq: Frequency of new channel in MHz
- 	 * @ht_enabled: Whether this is an HT channel
- 	 * @ch_offset: Secondary channel offset
-@@ -6450,6 +6470,7 @@ union wpa_event_data {
- 	 * @punct_bitmap: Puncturing bitmap
- 	 */
- 	struct ch_switch {
-+		int count;
- 		int freq;
- 		int ht_enabled;
- 		int ch_offset;
---- a/src/drivers/driver_nl80211_event.c
-+++ b/src/drivers/driver_nl80211_event.c
-@@ -1202,6 +1202,7 @@ static void mlme_event_ch_switch(struct
- 				 struct nlattr *bw, struct nlattr *cf1,
- 				 struct nlattr *cf2,
- 				 struct nlattr *punct_bitmap,
-+				 struct nlattr *count,
- 				 int finished)
- {
- 	struct i802_bss *bss;
-@@ -1265,6 +1266,8 @@ static void mlme_event_ch_switch(struct
- 		data.ch_switch.cf1 = nla_get_u32(cf1);
- 	if (cf2)
- 		data.ch_switch.cf2 = nla_get_u32(cf2);
-+	if (count)
-+		data.ch_switch.count = nla_get_u32(count);
- 
- 	if (finished)
- 		bss->flink->freq = data.ch_switch.freq;
-@@ -3912,6 +3915,7 @@ static void do_process_drv_event(struct
- 				     tb[NL80211_ATTR_CENTER_FREQ1],
- 				     tb[NL80211_ATTR_CENTER_FREQ2],
- 				     tb[NL80211_ATTR_PUNCT_BITMAP],
-+				     tb[NL80211_ATTR_CH_SWITCH_COUNT],
- 				     0);
- 		break;
- 	case NL80211_CMD_CH_SWITCH_NOTIFY:
-@@ -3924,6 +3928,7 @@ static void do_process_drv_event(struct
- 				     tb[NL80211_ATTR_CENTER_FREQ1],
- 				     tb[NL80211_ATTR_CENTER_FREQ2],
- 				     tb[NL80211_ATTR_PUNCT_BITMAP],
-+					 NULL,
- 				     1);
- 		break;
- 	case NL80211_CMD_DISCONNECT:
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -5389,6 +5389,7 @@ void supplicant_event(void *ctx, enum wp
- 		event_to_string(event), event);
- #endif /* CONFIG_NO_STDOUT_DEBUG */
- 
-+	wpas_ucode_event(wpa_s, event, data);
- 	switch (event) {
- 	case EVENT_AUTH:
- #ifdef CONFIG_FST
---- a/src/ap/ap_drv_ops.h
-+++ b/src/ap/ap_drv_ops.h
-@@ -393,6 +393,23 @@ static inline int hostapd_drv_stop_ap(st
- 	return hapd->driver->stop_ap(hapd->drv_priv);
- }
- 
-+static inline int hostapd_drv_if_rename(struct hostapd_data *hapd,
-+					enum wpa_driver_if_type type,
-+					const char *ifname,
-+					const char *new_name)
-+{
-+	if (!hapd->driver || !hapd->driver->if_rename || !hapd->drv_priv)
-+		return -1;
-+	return hapd->driver->if_rename(hapd->drv_priv, type, ifname, new_name);
-+}
-+
-+static inline int hostapd_drv_set_first_bss(struct hostapd_data *hapd)
-+{
-+	if (!hapd->driver || !hapd->driver->set_first_bss || !hapd->drv_priv)
-+		return 0;
-+	return hapd->driver->set_first_bss(hapd->drv_priv);
-+}
-+
- static inline int hostapd_drv_channel_info(struct hostapd_data *hapd,
- 					   struct wpa_channel_info *ci)
- {
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -1333,7 +1333,7 @@ static void wpa_driver_nl80211_event_rtm
- 		}
- 		wpa_printf(MSG_DEBUG, "nl80211: Interface down (%s/%s)",
- 			   namebuf, ifname);
--		if (os_strcmp(drv->first_bss->ifname, ifname) != 0) {
-+		if (drv->first_bss->ifindex != ifi->ifi_index) {
- 			wpa_printf(MSG_DEBUG,
- 				   "nl80211: Not the main interface (%s) - do not indicate interface down",
- 				   drv->first_bss->ifname);
-@@ -1369,7 +1369,7 @@ static void wpa_driver_nl80211_event_rtm
- 		}
- 		wpa_printf(MSG_DEBUG, "nl80211: Interface up (%s/%s)",
- 			   namebuf, ifname);
--		if (os_strcmp(drv->first_bss->ifname, ifname) != 0) {
-+		if (drv->first_bss->ifindex != ifi->ifi_index) {
- 			wpa_printf(MSG_DEBUG,
- 				   "nl80211: Not the main interface (%s) - do not indicate interface up",
- 				   drv->first_bss->ifname);
-@@ -8432,6 +8432,7 @@ static void *i802_init(struct hostapd_da
- 	char master_ifname[IFNAMSIZ];
- 	int ifindex, br_ifindex = 0;
- 	int br_added = 0;
-+	int err;
- 
- 	bss = wpa_driver_nl80211_drv_init(hapd, params->ifname,
- 					  params->global_priv, 1,
-@@ -8491,21 +8492,17 @@ static void *i802_init(struct hostapd_da
- 	    (params->num_bridge == 0 || !params->bridge[0]))
- 		add_ifidx(drv, br_ifindex, drv->ifindex);
- 
--	if (bss->added_if_into_bridge || bss->already_in_bridge) {
--		int err;
--
--		drv->rtnl_sk = nl_socket_alloc();
--		if (drv->rtnl_sk == NULL) {
--			wpa_printf(MSG_ERROR, "nl80211: Failed to allocate nl_sock");
--			goto failed;
--		}
-+	drv->rtnl_sk = nl_socket_alloc();
-+	if (drv->rtnl_sk == NULL) {
-+		wpa_printf(MSG_ERROR, "nl80211: Failed to allocate nl_sock");
-+		goto failed;
-+	}
- 
--		err = nl_connect(drv->rtnl_sk, NETLINK_ROUTE);
--		if (err) {
--			wpa_printf(MSG_ERROR, "nl80211: Failed to connect nl_sock to NETLINK_ROUTE: %s",
--				   nl_geterror(err));
--			goto failed;
--		}
-+	err = nl_connect(drv->rtnl_sk, NETLINK_ROUTE);
-+	if (err) {
-+		wpa_printf(MSG_ERROR, "nl80211: Failed to connect nl_sock to NETLINK_ROUTE: %s",
-+			   nl_geterror(err));
-+		goto failed;
- 	}
- 
- 	if (drv->capa.flags2 & WPA_DRIVER_FLAGS2_CONTROL_PORT_RX) {
-@@ -8875,6 +8872,50 @@ static int wpa_driver_nl80211_if_remove(
- 	return 0;
- }
- 
-+static int wpa_driver_nl80211_if_rename(struct i802_bss *bss,
-+					enum wpa_driver_if_type type,
-+					const char *ifname, const char *new_name)
-+{
-+	struct wpa_driver_nl80211_data *drv = bss->drv;
-+	struct ifinfomsg ifi = {
-+		.ifi_family = AF_UNSPEC,
-+		.ifi_index = bss->ifindex,
-+	};
-+	struct nl_msg *msg;
-+	int res = -ENOMEM;
-+
-+	if (ifname)
-+		ifi.ifi_index = if_nametoindex(ifname);
-+
-+	msg = nlmsg_alloc_simple(RTM_SETLINK, 0);
-+	if (!msg)
-+		return res;
-+
-+	if (nlmsg_append(msg, &ifi, sizeof(ifi), NLMSG_ALIGNTO) < 0)
-+		goto out;
-+
-+	if (nla_put_string(msg, IFLA_IFNAME, new_name))
-+		goto out;
-+
-+	res = nl_send_auto_complete(drv->rtnl_sk, msg);
-+	if (res < 0)
-+		goto out;
-+
-+	res = nl_wait_for_ack(drv->rtnl_sk);
-+	if (res) {
-+		wpa_printf(MSG_INFO,
-+			   "nl80211: Renaming device %s to %s failed: %s",
-+			   ifname ? ifname : bss->ifname, new_name, nl_geterror(res));
-+		goto out;
-+	}
-+
-+	if (type == WPA_IF_AP_BSS && !ifname)
-+		os_strlcpy(bss->ifname, new_name, sizeof(bss->ifname));
-+
-+out:
-+	nlmsg_free(msg);
-+	return res;
-+}
- 
- static int cookie_handler(struct nl_msg *msg, void *arg)
- {
-@@ -10513,6 +10554,37 @@ static int driver_nl80211_if_remove(void
- }
- 
- 
-+static int driver_nl80211_if_rename(void *priv, enum wpa_driver_if_type type,
-+				    const char *ifname, const char *new_name)
-+{
-+	struct i802_bss *bss = priv;
-+	return wpa_driver_nl80211_if_rename(bss, type, ifname, new_name);
-+}
-+
-+
-+static int driver_nl80211_set_first_bss(void *priv)
-+{
-+	struct i802_bss *bss = priv, *tbss;
-+	struct wpa_driver_nl80211_data *drv = bss->drv;
-+
-+	if (drv->first_bss == bss)
-+		return 0;
-+
-+	for (tbss = drv->first_bss; tbss; tbss = tbss->next) {
-+		if (tbss->next != bss)
-+			continue;
-+
-+		tbss->next = bss->next;
-+		bss->next = drv->first_bss;
-+		drv->first_bss = bss;
-+		drv->ctx = bss->ctx;
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+
- static int driver_nl80211_send_mlme(void *priv, const u8 *data,
- 				    size_t data_len, int noack,
- 				    unsigned int freq,
-@@ -13697,6 +13769,8 @@ const struct wpa_driver_ops wpa_driver_n
- 	.set_acl = wpa_driver_nl80211_set_acl,
- 	.if_add = wpa_driver_nl80211_if_add,
- 	.if_remove = driver_nl80211_if_remove,
-+	.if_rename = driver_nl80211_if_rename,
-+	.set_first_bss = driver_nl80211_set_first_bss,
- 	.send_mlme = driver_nl80211_send_mlme,
- 	.get_hw_feature_data = nl80211_get_hw_feature_data,
- 	.sta_add = wpa_driver_nl80211_sta_add,
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -547,11 +547,16 @@ static const char * sae_get_password(str
- 				     struct sae_pt **s_pt,
- 				     const struct sae_pk **s_pk)
- {
-+	struct hostapd_bss_config *conf = hapd->conf;
-+	struct hostapd_ssid *ssid = &conf->ssid;
-+	struct hostapd_sta_wpa_psk_short *psk;
- 	const char *password = NULL;
--	struct sae_password_entry *pw;
--	struct sae_pt *pt = NULL;
--	const struct sae_pk *pk = NULL;
--	struct hostapd_sta_wpa_psk_short *psk = NULL;
-+	struct sae_password_entry *pw = NULL;
-+ 	struct sae_pt *pt = NULL;
-+ 	const struct sae_pk *pk = NULL;
-+ 
-+	if (sta && sta->use_sta_psk)
-+		goto use_sta_psk;
- 
- 	for (pw = hapd->conf->sae_passwords; pw; pw = pw->next) {
- 		if (!is_broadcast_ether_addr(pw->peer_addr) &&
-@@ -582,6 +587,31 @@ static const char * sae_get_password(str
- 		}
- 	}
- 
-+use_sta_psk:
-+	if (!password && sta) {
-+		for (psk = sta->psk; psk; psk = psk->next) {
-+			if (!psk->is_passphrase)
-+				continue;
-+
-+			password = psk->passphrase;
-+			if (!sta->use_sta_psk)
-+				break;
-+
-+			if (sta->sae_pt) {
-+				pt = sta->sae_pt;
-+				break;
-+			}
-+
-+			pt = sae_derive_pt(conf->sae_groups, ssid->ssid,
-+					   ssid->ssid_len,
-+					   (const u8 *) password,
-+					   os_strlen(password),
-+					   NULL);
-+			sta->sae_pt = pt;
-+			break;
-+		}
-+	}
-+
- 	if (pw_entry)
- 		*pw_entry = pw;
- 	if (s_pt)
-@@ -3105,6 +3135,12 @@ static void handle_auth(struct hostapd_d
- 		goto fail;
- 	}
- 
-+	res = hostapd_ucode_sta_auth(hapd, sta);
-+	if (res) {
-+		resp = res;
-+		goto fail;
-+	}
-+
- 	sta->flags &= ~WLAN_STA_PREAUTH;
- 	ieee802_1x_notify_pre_auth(sta->eapol_sm, 0);
- 
---- a/src/ap/sta_info.c
-+++ b/src/ap/sta_info.c
-@@ -425,6 +425,9 @@ void ap_free_sta(struct hostapd_data *ha
- 	forced_memzero(sta->last_tk, WPA_TK_MAX_LEN);
- #endif /* CONFIG_TESTING_OPTIONS */
- 
-+	if (sta->sae_pt)
-+		sae_deinit_pt(sta->sae_pt);
-+
- 	os_free(sta);
- }
- 
-@@ -1326,6 +1329,8 @@ void ap_sta_set_authorized(struct hostap
- 		sta->flags &= ~WLAN_STA_AUTHORIZED;
- 	}
- 
-+	if (authorized)
-+		hostapd_ucode_sta_connected(hapd, sta);
- #ifdef CONFIG_P2P
- 	if (hapd->p2p_group == NULL) {
- 		if (sta->p2p_ie != NULL &&
---- a/src/ap/sta_info.h
-+++ b/src/ap/sta_info.h
-@@ -198,6 +198,9 @@ struct sta_info {
- 	int vlan_id_bound; /* updated by ap_sta_bind_vlan() */
- 	 /* PSKs from RADIUS authentication server */
- 	struct hostapd_sta_wpa_psk_short *psk;
-+	struct sae_pt *sae_pt;
-+	int use_sta_psk;
-+	int psk_idx;
- 
- 	char *identity; /* User-Name from RADIUS */
- 	char *radius_cui; /* Chargeable-User-Identity from RADIUS */
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -341,6 +341,7 @@ static const u8 * hostapd_wpa_auth_get_p
- 	struct sta_info *sta = ap_get_sta(hapd, addr);
- 	const u8 *psk;
- 
-+	sta->psk_idx = 0;
- 	if (vlan_id)
- 		*vlan_id = 0;
- 	if (psk_len)
-@@ -387,13 +388,18 @@ static const u8 * hostapd_wpa_auth_get_p
- 	 * returned psk which should not be returned again.
- 	 * logic list (all hostapd_get_psk; all sta->psk)
- 	 */
-+	if (sta && sta->use_sta_psk)
-+		psk = NULL;
- 	if (sta && sta->psk && !psk) {
- 		struct hostapd_sta_wpa_psk_short *pos;
-+		int psk_idx;
- 
- 		if (vlan_id)
- 			*vlan_id = 0;
- 		psk = sta->psk->psk;
-+		sta->psk_idx = psk_idx = 1;
- 		for (pos = sta->psk; pos; pos = pos->next) {
-+			psk_idx++;
- 			if (pos->is_passphrase) {
- 				if (pbkdf2_sha1(pos->passphrase,
- 						hapd->conf->ssid.ssid,
-@@ -406,10 +412,14 @@ static const u8 * hostapd_wpa_auth_get_p
- 				pos->is_passphrase = 0;
- 			}
- 			if (pos->psk == prev_psk) {
-+				sta->psk_idx = psk_idx;
- 				psk = pos->next ? pos->next->psk : NULL;
- 				break;
- 			}
- 		}
-+
-+		if (!psk)
-+			sta->psk_idx = 0;
- 	}
- 	return psk;
- }

feeds/hostapd/hostapd/patches/610-hostapd_cli_ujail_permission.patch

@@ -1,33 +0,0 @@
---- a/src/common/wpa_ctrl.c
-+++ b/src/common/wpa_ctrl.c
-@@ -135,7 +135,7 @@ try_again:
- 		return NULL;
- 	}
- 	tries++;
--#ifdef ANDROID
-+
- 	/* Set client socket file permissions so that bind() creates the client
- 	 * socket with these permissions and there is no need to try to change
- 	 * them with chmod() after bind() which would have potential issues with
-@@ -147,7 +147,7 @@ try_again:
- 	 * operations to allow the response to go through. Those are using the
- 	 * no-deference-symlinks version to avoid races. */
- 	fchmod(ctrl->s, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
--#endif /* ANDROID */
-+
- 	if (bind(ctrl->s, (struct sockaddr *) &ctrl->local,
- 		    sizeof(ctrl->local)) < 0) {
- 		if (errno == EADDRINUSE && tries < 2) {
-@@ -165,7 +165,11 @@ try_again:
- 		return NULL;
- 	}
- 
--#ifdef ANDROID
-+#ifndef ANDROID
-+	/* Set group even if we do not have privileges to change owner */
-+	lchown(ctrl->local.sun_path, -1, 101);
-+	lchown(ctrl->local.sun_path, 101, 101);
-+#else
- 	/* Set group even if we do not have privileges to change owner */
- 	lchown(ctrl->local.sun_path, -1, AID_WIFI);
- 	lchown(ctrl->local.sun_path, AID_SYSTEM, AID_WIFI);

feeds/hostapd/hostapd/patches/701-reload_config_inline.patch

@@ -1,33 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -4816,7 +4816,12 @@ struct hostapd_config * hostapd_config_r
- 	int errors = 0;
- 	size_t i;
- 
--	f = fopen(fname, "r");
-+	if (!strncmp(fname, "data:", 5)) {
-+		f = fmemopen((void *)(fname + 5), strlen(fname + 5), "r");
-+		fname = "<inline>";
-+	} else {
-+		f = fopen(fname, "r");
-+	}
- 	if (f == NULL) {
- 		wpa_printf(MSG_ERROR, "Could not open configuration file '%s' "
- 			   "for reading.", fname);
---- a/wpa_supplicant/config_file.c
-+++ b/wpa_supplicant/config_file.c
-@@ -326,8 +326,13 @@ struct wpa_config * wpa_config_read(cons
- 	while (cred_tail && cred_tail->next)
- 		cred_tail = cred_tail->next;
- 
-+	if (!strncmp(name, "data:", 5)) {
-+		f = fmemopen((void *)(name + 5), strlen(name + 5), "r");
-+		name = "<inline>";
-+	} else {
-+		f = fopen(name, "r");
-+	}
- 	wpa_printf(MSG_DEBUG, "Reading configuration file '%s'", name);
--	f = fopen(name, "r");
- 	if (f == NULL) {
- 		wpa_printf(MSG_ERROR, "Failed to open config file '%s', "
- 			   "error: %s", name, strerror(errno));

feeds/hostapd/hostapd/patches/710-vlan_no_bridge.patch

@@ -1,41 +0,0 @@
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -121,6 +121,7 @@ struct hostapd_ssid {
- #define DYNAMIC_VLAN_OPTIONAL 1
- #define DYNAMIC_VLAN_REQUIRED 2
- 	int dynamic_vlan;
-+	int vlan_no_bridge;
- #define DYNAMIC_VLAN_NAMING_WITHOUT_DEVICE 0
- #define DYNAMIC_VLAN_NAMING_WITH_DEVICE 1
- #define DYNAMIC_VLAN_NAMING_END 2
---- a/src/ap/vlan_full.c
-+++ b/src/ap/vlan_full.c
-@@ -475,6 +475,9 @@ void vlan_newlink(const char *ifname, st
- 	if (!vlan)
- 		return;
- 
-+	if (hapd->conf->ssid.vlan_no_bridge)
-+		goto out;
-+
- 	vlan->configured = 1;
- 
- 	notempty = vlan->vlan_desc.notempty;
-@@ -506,6 +509,7 @@ void vlan_newlink(const char *ifname, st
- 				    ifname, br_name, tagged[i], hapd);
- 	}
- 
-+out:
- 	ifconfig_up(ifname);
- }
- 
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -3351,6 +3351,8 @@ static int hostapd_config_fill(struct ho
- #ifndef CONFIG_NO_VLAN
- 	} else if (os_strcmp(buf, "dynamic_vlan") == 0) {
- 		bss->ssid.dynamic_vlan = atoi(pos);
-+	} else if (os_strcmp(buf, "vlan_no_bridge") == 0) {
-+		bss->ssid.vlan_no_bridge = atoi(pos);
- 	} else if (os_strcmp(buf, "per_sta_vif") == 0) {
- 		bss->ssid.per_sta_vif = atoi(pos);
- 	} else if (os_strcmp(buf, "vlan_file") == 0) {

feeds/hostapd/hostapd/patches/711-wds_bridge_force.patch

@@ -1,22 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -2318,6 +2318,8 @@ static int hostapd_config_fill(struct ho
- 			   sizeof(conf->bss[0]->iface));
- 	} else if (os_strcmp(buf, "bridge") == 0) {
- 		os_strlcpy(bss->bridge, pos, sizeof(bss->bridge));
-+		if (!bss->wds_bridge[0])
-+			os_strlcpy(bss->wds_bridge, pos, sizeof(bss->wds_bridge));
- 	} else if (os_strcmp(buf, "bridge_hairpin") == 0) {
- 		bss->bridge_hairpin = atoi(pos);
- 	} else if (os_strcmp(buf, "vlan_bridge") == 0) {
---- a/src/ap/ap_drv_ops.c
-+++ b/src/ap/ap_drv_ops.c
-@@ -348,8 +348,6 @@ int hostapd_set_wds_sta(struct hostapd_d
- 		return -1;
- 	if (hapd->conf->wds_bridge[0])
- 		bridge = hapd->conf->wds_bridge;
--	else if (hapd->conf->bridge[0])
--		bridge = hapd->conf->bridge;
- 	return hapd->driver->set_wds_sta(hapd->drv_priv, addr, aid, val,
- 					 bridge, ifname_wds);
- }

feeds/hostapd/hostapd/patches/720-iface_max_num_sta.patch

@@ -1,81 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -2848,6 +2848,14 @@ static int hostapd_config_fill(struct ho
- 				   line, bss->max_num_sta, MAX_STA_COUNT);
- 			return 1;
- 		}
-+	} else if (os_strcmp(buf, "iface_max_num_sta") == 0) {
-+		conf->max_num_sta = atoi(pos);
-+		if (conf->max_num_sta < 0 ||
-+		    conf->max_num_sta > MAX_STA_COUNT) {
-+			wpa_printf(MSG_ERROR, "Line %d: Invalid max_num_sta=%d; allowed range 0..%d",
-+				   line, conf->max_num_sta, MAX_STA_COUNT);
-+			return 1;
-+		}
- 	} else if (os_strcmp(buf, "wpa") == 0) {
- 		bss->wpa = atoi(pos);
- 	} else if (os_strcmp(buf, "extended_key_id") == 0) {
---- a/src/ap/hostapd.h
-+++ b/src/ap/hostapd.h
-@@ -742,6 +742,7 @@ void hostapd_cleanup_cs_params(struct ho
- void hostapd_periodic_iface(struct hostapd_iface *iface);
- int hostapd_owe_trans_get_info(struct hostapd_data *hapd);
- void hostapd_ocv_check_csa_sa_query(void *eloop_ctx, void *timeout_ctx);
-+int hostapd_check_max_sta(struct hostapd_data *hapd);
- 
- void hostapd_switch_color(struct hostapd_data *hapd, u64 bitmap);
- void hostapd_cleanup_cca_params(struct hostapd_data *hapd);
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -244,6 +244,29 @@ static int hostapd_iface_conf_changed(st
- 	return 0;
- }
- 
-+static inline int hostapd_iface_num_sta(struct hostapd_iface *iface)
-+{
-+	int num_sta = 0;
-+	int i;
-+
-+	for (i = 0; i < iface->num_bss; i++)
-+		num_sta += iface->bss[i]->num_sta;
-+
-+	return num_sta;
-+}
-+
-+
-+int hostapd_check_max_sta(struct hostapd_data *hapd)
-+{
-+	if (hapd->num_sta >= hapd->conf->max_num_sta)
-+		return 1;
-+
-+	if (hapd->iconf->max_num_sta &&
-+	    hostapd_iface_num_sta(hapd->iface) >= hapd->iconf->max_num_sta)
-+		return 1;
-+
-+	return 0;
-+}
- 
- int hostapd_reload_config(struct hostapd_iface *iface)
- {
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -1252,7 +1252,7 @@ void handle_probe_req(struct hostapd_dat
- 	if (hapd->conf->no_probe_resp_if_max_sta &&
- 	    is_multicast_ether_addr(mgmt->da) &&
- 	    is_multicast_ether_addr(mgmt->bssid) &&
--	    hapd->num_sta >= hapd->conf->max_num_sta &&
-+	    hostapd_check_max_sta(hapd) &&
- 	    !ap_get_sta(hapd, mgmt->sa)) {
- 		wpa_printf(MSG_MSGDUMP, "%s: Ignore Probe Request from " MACSTR
- 			   " since no room for additional STA",
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -1039,6 +1039,8 @@ struct hostapd_config {
- 	unsigned int track_sta_max_num;
- 	unsigned int track_sta_max_age;
- 
-+	int max_num_sta;
-+
- 	char country[3]; /* first two octets: country code as described in
- 			  * ISO/IEC 3166-1. Third octet:
- 			  * ' ' (ascii 32): all environments

feeds/hostapd/hostapd/patches/730-ft_iface.patch

@@ -1,38 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -3007,6 +3007,8 @@ static int hostapd_config_fill(struct ho
- 		wpa_printf(MSG_INFO,
- 			   "Line %d: Obsolete peerkey parameter ignored", line);
- #ifdef CONFIG_IEEE80211R_AP
-+	} else if (os_strcmp(buf, "ft_iface") == 0) {
-+		os_strlcpy(bss->ft_iface, pos, sizeof(bss->ft_iface));
- 	} else if (os_strcmp(buf, "mobility_domain") == 0) {
- 		if (os_strlen(pos) != 2 * MOBILITY_DOMAIN_ID_LEN ||
- 		    hexstr2bin(pos, bss->mobility_domain,
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -283,6 +283,7 @@ struct airtime_sta_weight {
- struct hostapd_bss_config {
- 	char iface[IFNAMSIZ + 1];
- 	char bridge[IFNAMSIZ + 1];
-+	char ft_iface[IFNAMSIZ + 1];
- 	char vlan_bridge[IFNAMSIZ + 1];
- 	char wds_bridge[IFNAMSIZ + 1];
- 	int bridge_hairpin; /* hairpin_mode on bridge members */
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -1727,8 +1727,12 @@ int hostapd_setup_wpa(struct hostapd_dat
- 	    wpa_key_mgmt_ft(hapd->conf->wpa_key_mgmt)) {
- 		const char *ft_iface;
- 
--		ft_iface = hapd->conf->bridge[0] ? hapd->conf->bridge :
--			   hapd->conf->iface;
-+		if (hapd->conf->ft_iface[0])
-+			ft_iface = hapd->conf->ft_iface;
-+		else if (hapd->conf->bridge[0])
-+			ft_iface = hapd->conf->bridge;
-+		else
-+			ft_iface = hapd->conf->iface;
- 		hapd->l2 = l2_packet_init(ft_iface, NULL, ETH_P_RRB,
- 					  hostapd_rrb_receive, hapd, 1);
- 		if (!hapd->l2) {

feeds/hostapd/hostapd/patches/740-snoop_iface.patch

@@ -1,139 +0,0 @@
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -284,6 +284,7 @@ struct hostapd_bss_config {
- 	char iface[IFNAMSIZ + 1];
- 	char bridge[IFNAMSIZ + 1];
- 	char ft_iface[IFNAMSIZ + 1];
-+	char snoop_iface[IFNAMSIZ + 1];
- 	char vlan_bridge[IFNAMSIZ + 1];
- 	char wds_bridge[IFNAMSIZ + 1];
- 	int bridge_hairpin; /* hairpin_mode on bridge members */
---- a/src/ap/x_snoop.c
-+++ b/src/ap/x_snoop.c
-@@ -33,28 +33,31 @@ int x_snoop_init(struct hostapd_data *ha
- 
- 	hapd->x_snoop_initialized = true;
- 
--	if (hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_HAIRPIN_MODE,
-+	if (!conf->snoop_iface[0] &&
-+	    hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_HAIRPIN_MODE,
- 					 1)) {
- 		wpa_printf(MSG_DEBUG,
- 			   "x_snoop: Failed to enable hairpin_mode on the bridge port");
- 		return -1;
- 	}
- 
--	if (hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_PROXYARP, 1)) {
-+	if (!conf->snoop_iface[0] &&
-+	    hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_PROXYARP, 1)) {
- 		wpa_printf(MSG_DEBUG,
- 			   "x_snoop: Failed to enable proxyarp on the bridge port");
- 		return -1;
- 	}
- 
- 	if (hostapd_drv_br_set_net_param(hapd, DRV_BR_NET_PARAM_GARP_ACCEPT,
--					 1)) {
-+					 conf->snoop_iface[0] ? conf->snoop_iface : NULL, 1)) {
- 		wpa_printf(MSG_DEBUG,
- 			   "x_snoop: Failed to enable accepting gratuitous ARP on the bridge");
- 		return -1;
- 	}
- 
- #ifdef CONFIG_IPV6
--	if (hostapd_drv_br_set_net_param(hapd, DRV_BR_MULTICAST_SNOOPING, 1)) {
-+	if (!conf->snoop_iface[0] &&
-+	    hostapd_drv_br_set_net_param(hapd, DRV_BR_MULTICAST_SNOOPING, NULL, 1)) {
- 		wpa_printf(MSG_DEBUG,
- 			   "x_snoop: Failed to enable multicast snooping on the bridge");
- 		return -1;
-@@ -73,8 +76,12 @@ x_snoop_get_l2_packet(struct hostapd_dat
- {
- 	struct hostapd_bss_config *conf = hapd->conf;
- 	struct l2_packet_data *l2;
-+	const char *ifname = conf->bridge;
-+
-+	if (conf->snoop_iface[0])
-+		ifname = conf->snoop_iface;
- 
--	l2 = l2_packet_init(conf->bridge, NULL, ETH_P_ALL, handler, hapd, 1);
-+	l2 = l2_packet_init(ifname, NULL, ETH_P_ALL, handler, hapd, 1);
- 	if (l2 == NULL) {
- 		wpa_printf(MSG_DEBUG,
- 			   "x_snoop: Failed to initialize L2 packet processing %s",
-@@ -127,9 +134,12 @@ void x_snoop_mcast_to_ucast_convert_send
- 
- void x_snoop_deinit(struct hostapd_data *hapd)
- {
-+	struct hostapd_bss_config *conf = hapd->conf;
-+
- 	if (!hapd->x_snoop_initialized)
- 		return;
--	hostapd_drv_br_set_net_param(hapd, DRV_BR_NET_PARAM_GARP_ACCEPT, 0);
-+	hostapd_drv_br_set_net_param(hapd, DRV_BR_NET_PARAM_GARP_ACCEPT,
-+				     conf->snoop_iface[0] ? conf->snoop_iface : NULL, 0);
- 	hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_PROXYARP, 0);
- 	hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_HAIRPIN_MODE, 0);
- 	hapd->x_snoop_initialized = false;
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -2322,6 +2322,8 @@ static int hostapd_config_fill(struct ho
- 			os_strlcpy(bss->wds_bridge, pos, sizeof(bss->wds_bridge));
- 	} else if (os_strcmp(buf, "bridge_hairpin") == 0) {
- 		bss->bridge_hairpin = atoi(pos);
-+	} else if (os_strcmp(buf, "snoop_iface") == 0) {
-+		os_strlcpy(bss->snoop_iface, pos, sizeof(bss->snoop_iface));
- 	} else if (os_strcmp(buf, "vlan_bridge") == 0) {
- 		os_strlcpy(bss->vlan_bridge, pos, sizeof(bss->vlan_bridge));
- 	} else if (os_strcmp(buf, "wds_bridge") == 0) {
---- a/src/ap/ap_drv_ops.h
-+++ b/src/ap/ap_drv_ops.h
-@@ -366,12 +366,12 @@ static inline int hostapd_drv_br_port_se
- 
- static inline int hostapd_drv_br_set_net_param(struct hostapd_data *hapd,
- 					       enum drv_br_net_param param,
--					       unsigned int val)
-+					       const char *ifname, unsigned int val)
- {
- 	if (hapd->driver == NULL || hapd->drv_priv == NULL ||
- 	    hapd->driver->br_set_net_param == NULL)
- 		return -1;
--	return hapd->driver->br_set_net_param(hapd->drv_priv, param, val);
-+	return hapd->driver->br_set_net_param(hapd->drv_priv, param, ifname, val);
- }
- 
- static inline int hostapd_drv_vendor_cmd(struct hostapd_data *hapd,
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -4209,7 +4209,7 @@ struct wpa_driver_ops {
- 	 * Returns: 0 on success, negative (<0) on failure
- 	 */
- 	int (*br_set_net_param)(void *priv, enum drv_br_net_param param,
--				unsigned int val);
-+				const char *ifname, unsigned int val);
- 
- 	/**
- 	 * get_wowlan - Get wake-on-wireless status
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -12168,7 +12168,7 @@ static const char * drv_br_net_param_str
- 
- 
- static int wpa_driver_br_set_net_param(void *priv, enum drv_br_net_param param,
--				       unsigned int val)
-+				       const char *ifname, unsigned int val)
- {
- 	struct i802_bss *bss = priv;
- 	char path[128];
-@@ -12194,8 +12194,11 @@ static int wpa_driver_br_set_net_param(v
- 			return -EINVAL;
- 	}
- 
-+	if (!ifname)
-+		ifname = bss->brname;
-+
- 	os_snprintf(path, sizeof(path), "/proc/sys/net/ipv%d/conf/%s/%s",
--		    ip_version, bss->brname, param_txt);
-+		    ip_version, ifname, param_txt);
- 
- set_val:
- 	if (linux_write_system_file(path, val))

feeds/hostapd/hostapd/patches/750-qos_map_set_without_interworking.patch

@@ -1,97 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -1604,6 +1604,8 @@ static int parse_anqp_elem(struct hostap
- 	return 0;
- }
- 
-+#endif /* CONFIG_INTERWORKING */
-+
- 
- static int parse_qos_map_set(struct hostapd_bss_config *bss,
- 			     char *buf, int line)
-@@ -1645,8 +1647,6 @@ static int parse_qos_map_set(struct host
- 	return 0;
- }
- 
--#endif /* CONFIG_INTERWORKING */
--
- 
- #ifdef CONFIG_HS20
- static int hs20_parse_conn_capab(struct hostapd_bss_config *bss, char *buf,
-@@ -4062,10 +4062,10 @@ static int hostapd_config_fill(struct ho
- 		bss->gas_frag_limit = val;
- 	} else if (os_strcmp(buf, "gas_comeback_delay") == 0) {
- 		bss->gas_comeback_delay = atoi(pos);
-+#endif /* CONFIG_INTERWORKING */
- 	} else if (os_strcmp(buf, "qos_map_set") == 0) {
- 		if (parse_qos_map_set(bss, pos, line) < 0)
- 			return 1;
--#endif /* CONFIG_INTERWORKING */
- #ifdef CONFIG_RADIUS_TEST
- 	} else if (os_strcmp(buf, "dump_msk_file") == 0) {
- 		os_free(bss->dump_msk_file);
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -1486,6 +1486,7 @@ int hostapd_setup_bss(struct hostapd_dat
- 		wpa_printf(MSG_ERROR, "GAS server initialization failed");
- 		return -1;
- 	}
-+#endif /* CONFIG_INTERWORKING */
- 
- 	if (conf->qos_map_set_len &&
- 	    hostapd_drv_set_qos_map(hapd, conf->qos_map_set,
-@@ -1493,7 +1494,6 @@ int hostapd_setup_bss(struct hostapd_dat
- 		wpa_printf(MSG_ERROR, "Failed to initialize QoS Map");
- 		return -1;
- 	}
--#endif /* CONFIG_INTERWORKING */
- 
- 	if (conf->bss_load_update_period && bss_load_update_init(hapd)) {
- 		wpa_printf(MSG_ERROR, "BSS Load initialization failed");
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -2683,8 +2683,6 @@ void wnm_bss_keep_alive_deinit(struct wp
- }
- 
- 
--#ifdef CONFIG_INTERWORKING
--
- static int wpas_qos_map_set(struct wpa_supplicant *wpa_s, const u8 *qos_map,
- 			    size_t len)
- {
-@@ -2717,8 +2715,6 @@ static void interworking_process_assoc_r
- 	}
- }
- 
--#endif /* CONFIG_INTERWORKING */
--
- 
- static void wpa_supplicant_set_4addr_mode(struct wpa_supplicant *wpa_s)
- {
-@@ -3098,10 +3094,8 @@ static int wpa_supplicant_event_associnf
- 		wnm_process_assoc_resp(wpa_s, data->assoc_info.resp_ies,
- 				       data->assoc_info.resp_ies_len);
- #endif /* CONFIG_WNM */
--#ifdef CONFIG_INTERWORKING
- 		interworking_process_assoc_resp(wpa_s, data->assoc_info.resp_ies,
- 						data->assoc_info.resp_ies_len);
--#endif /* CONFIG_INTERWORKING */
- 		if (wpa_s->hw_capab == CAPAB_VHT &&
- 		    get_ie(data->assoc_info.resp_ies,
- 			   data->assoc_info.resp_ies_len, WLAN_EID_VHT_CAP))
---- a/src/ap/ieee802_11_shared.c
-+++ b/src/ap/ieee802_11_shared.c
-@@ -1116,13 +1116,11 @@ u8 * hostapd_eid_rsnxe(struct hostapd_da
- u16 check_ext_capab(struct hostapd_data *hapd, struct sta_info *sta,
- 		    const u8 *ext_capab_ie, size_t ext_capab_ie_len)
- {
--#ifdef CONFIG_INTERWORKING
- 	/* check for QoS Map support */
- 	if (ext_capab_ie_len >= 5) {
- 		if (ext_capab_ie[4] & 0x01)
- 			sta->qos_map_enabled = 1;
- 	}
--#endif /* CONFIG_INTERWORKING */
- 
- 	if (ext_capab_ie_len > 0) {
- 		sta->ecsa_supported = !!(ext_capab_ie[0] & BIT(2));

feeds/hostapd/hostapd/patches/750-wispr.patch

@@ -1,113 +0,0 @@
-Index: hostapd-2021-02-20-59e9794c/src/ap/ieee802_1x.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/src/ap/ieee802_1x.c
-+++ hostapd-2021-02-20-59e9794c/src/ap/ieee802_1x.c
-@@ -1904,6 +1904,25 @@ static int ieee802_1x_update_vlan(struct
- }
- #endif /* CONFIG_NO_VLAN */
- 
-+static int ieee802_1x_update_wispr(struct hostapd_data *hapd,
-+				   struct sta_info *sta,
-+				   struct radius_msg *msg)
-+{
-+	memset(sta->bandwidth, 0, sizeof(sta->bandwidth));
-+
-+	if (radius_msg_get_wispr(msg, &sta->bandwidth))
-+		return 0;
-+
-+	if (!sta->bandwidth[0] && !sta->bandwidth[1])
-+		return 0;
-+
-+	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE8021X,
-+		       HOSTAPD_LEVEL_INFO,
-+		       "received wispr bandwidth from RADIUS server %d/%d",
-+		       sta->bandwidth[0], sta->bandwidth[1]);
-+
-+	return 0;
-+}
- 
- /**
-  * ieee802_1x_receive_auth - Process RADIUS frames from Authentication Server
-@@ -2029,6 +2048,7 @@ ieee802_1x_receive_auth(struct radius_ms
- 		ieee802_1x_check_hs20(hapd, sta, msg,
- 				      session_timeout_set ?
- 				      (int) session_timeout : -1);
-+		ieee802_1x_update_wispr(hapd, sta, msg);
- 		break;
- 	case RADIUS_CODE_ACCESS_REJECT:
- 		sm->eap_if->aaaFail = true;
-Index: hostapd-2021-02-20-59e9794c/src/ap/sta_info.h
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/src/ap/sta_info.h
-+++ hostapd-2021-02-20-59e9794c/src/ap/sta_info.h
-@@ -117,6 +117,7 @@ struct sta_info {
- 	u8 supported_rates[WLAN_SUPP_RATES_MAX];
- 	int supported_rates_len;
- 	u8 qosinfo; /* Valid when WLAN_STA_WMM is set */
-+	u32 bandwidth[2];
- 
- #ifdef CONFIG_MESH
- 	enum mesh_plink_state plink_state;
-Index: hostapd-2021-02-20-59e9794c/src/radius/radius.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/src/radius/radius.c
-+++ hostapd-2021-02-20-59e9794c/src/radius/radius.c
-@@ -1182,6 +1182,35 @@ radius_msg_get_cisco_keys(struct radius_
- 	return keys;
- }
- 
-+#define RADIUS_VENDOR_ID_WISPR	14122
-+#define RADIUS_WISPR_AV_BW_UP	7
-+#define RADIUS_WISPR_AV_BW_DOWN	8
-+
-+int
-+radius_msg_get_wispr(struct radius_msg *msg, u32 *bandwidth)
-+{
-+	int i;
-+
-+	if (msg == NULL || bandwidth == NULL)
-+		return 1;
-+
-+	for (i = 0; i < 2; i++) {
-+		size_t keylen;
-+		u8 *key;
-+
-+		key = radius_msg_get_vendor_attr(msg, RADIUS_VENDOR_ID_WISPR,
-+						 RADIUS_WISPR_AV_BW_UP + i, &keylen);
-+		if (!key)
-+			continue;
-+
-+		if (keylen == 4)
-+			bandwidth[i] = ntohl(*((u32 *)key));
-+		os_free(key);
-+	}
-+
-+	return 0;
-+}
-+
- 
- int radius_msg_add_mppe_keys(struct radius_msg *msg,
- 			     const u8 *req_authenticator,
-Index: hostapd-2021-02-20-59e9794c/src/radius/radius.h
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/src/radius/radius.h
-+++ hostapd-2021-02-20-59e9794c/src/radius/radius.h
-@@ -205,6 +205,10 @@ enum {
- 	RADIUS_VENDOR_ATTR_WFA_HS20_T_C_URL = 10,
- };
- 
-+#define RADIUS_VENDOR_ID_WISPR	14122
-+#define RADIUS_WISPR_AV_BW_UP	7
-+#define RADIUS_WISPR_AV_BW_DOWN	8
-+
- #ifdef _MSC_VER
- #pragma pack(pop)
- #endif /* _MSC_VER */
-@@ -277,6 +281,7 @@ radius_msg_get_ms_keys(struct radius_msg
- struct radius_ms_mppe_keys *
- radius_msg_get_cisco_keys(struct radius_msg *msg, struct radius_msg *sent_msg,
- 			  const u8 *secret, size_t secret_len);
-+int radius_msg_get_wispr(struct radius_msg *msg, u32 *bandwidth);
- int radius_msg_add_mppe_keys(struct radius_msg *msg,
- 			     const u8 *req_authenticator,
- 			     const u8 *secret, size_t secret_len,

feeds/hostapd/hostapd/patches/751-qos_map_ignore_when_unsupported.patch

@@ -1,12 +0,0 @@
---- a/src/ap/ap_drv_ops.c
-+++ b/src/ap/ap_drv_ops.c
-@@ -927,7 +927,8 @@ int hostapd_start_dfs_cac(struct hostapd
- int hostapd_drv_set_qos_map(struct hostapd_data *hapd,
- 			    const u8 *qos_map_set, u8 qos_map_set_len)
- {
--	if (!hapd->driver || !hapd->driver->set_qos_map || !hapd->drv_priv)
-+	if (!hapd->driver || !hapd->driver->set_qos_map || !hapd->drv_priv ||
-+	    !(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_QOS_MAPPING))
- 		return 0;
- 	return hapd->driver->set_qos_map(hapd->drv_priv, qos_map_set,
- 					 qos_map_set_len);

feeds/hostapd/hostapd/patches/751-wispr-ft.patch

@@ -1,539 +0,0 @@
---- a/src/ap/wpa_auth.h
-+++ b/src/ap/wpa_auth.h
-@@ -16,7 +16,11 @@
- 
- struct vlan_description;
- struct mld_info;
--
-+struct rate_description {
-+	u32 rx;
-+	u32 tx;
-+};
-+ 
- #define MAX_OWN_IE_OVERRIDE 256
- 
- #ifdef _MSC_VER
-@@ -88,6 +92,7 @@ struct ft_rrb_frame {
- #define FT_RRB_IDENTITY      15
- #define FT_RRB_RADIUS_CUI    16
- #define FT_RRB_SESSION_TIMEOUT  17 /* le32 seconds */
-+#define FT_RRB_RATE_LIMIT	18
- 
- struct ft_rrb_tlv {
- 	le16 type;
-@@ -368,6 +373,10 @@ struct wpa_auth_callbacks {
- 			struct vlan_description *vlan);
- 	int (*get_vlan)(void *ctx, const u8 *sta_addr,
- 			struct vlan_description *vlan);
-+	int (*set_rate_limit)(void *ctx, const u8 *sta_addr,
-+			      struct rate_description *rate);
-+	int (*get_rate_limit)(void *ctx, const u8 *sta_addr,
-+			      struct rate_description *rate);
- 	int (*set_identity)(void *ctx, const u8 *sta_addr,
- 			    const u8 *identity, size_t identity_len);
- 	size_t (*get_identity)(void *ctx, const u8 *sta_addr, const u8 **buf);
-@@ -536,7 +545,7 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
- 			struct vlan_description *vlan,
- 			const u8 **identity, size_t *identity_len,
- 			const u8 **radius_cui, size_t *radius_cui_len,
--			int *session_timeout);
-+			int *session_timeout, struct rate_description *rate);
- 
- #endif /* CONFIG_IEEE80211R_AP */
- 
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -1200,6 +1200,40 @@ static int hostapd_wpa_auth_get_vlan(voi
- }
- 
- 
-+static int hostapd_wpa_auth_set_rate_limit(void *ctx, const u8 *sta_addr,
-+					   struct rate_description *rate)
-+{
-+	struct hostapd_data *hapd = ctx;
-+	struct sta_info *sta;
-+
-+	sta = ap_get_sta(hapd, sta_addr);
-+	if (!sta || !sta->wpa_sm)
-+		return -1;
-+
-+	memcpy(sta->bandwidth, rate, sizeof(*rate));
-+	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
-+		       HOSTAPD_LEVEL_INFO, "rate-limit %d %d", sta->bandwidth[0], sta->bandwidth[1]);
-+
-+	return 0;
-+}
-+
-+
-+static int hostapd_wpa_auth_get_rate_limit(void *ctx, const u8 *sta_addr,
-+					   struct rate_description *rate)
-+{
-+	struct hostapd_data *hapd = ctx;
-+	struct sta_info *sta;
-+
-+	sta = ap_get_sta(hapd, sta_addr);
-+	if (!sta)
-+		return -1;
-+
-+	memcpy(rate, sta->bandwidth, sizeof(*rate));
-+
-+	return 0;
-+}
-+
-+
- static int
- hostapd_wpa_auth_set_identity(void *ctx, const u8 *sta_addr,
- 			      const u8 *identity, size_t identity_len)
-@@ -1640,6 +1674,8 @@ int hostapd_setup_wpa(struct hostapd_dat
- 		.add_tspec = hostapd_wpa_auth_add_tspec,
- 		.set_vlan = hostapd_wpa_auth_set_vlan,
- 		.get_vlan = hostapd_wpa_auth_get_vlan,
-+		.set_rate_limit = hostapd_wpa_auth_set_rate_limit,
-+		.get_rate_limit = hostapd_wpa_auth_get_rate_limit,
- 		.set_identity = hostapd_wpa_auth_set_identity,
- 		.get_identity = hostapd_wpa_auth_get_identity,
- 		.set_radius_cui = hostapd_wpa_auth_set_radius_cui,
---- a/src/ap/wpa_auth_ft.c
-+++ b/src/ap/wpa_auth_ft.c
-@@ -379,6 +379,14 @@ static size_t wpa_ft_vlan_len(const stru
- 	return tlv_len;
- }
- 
-+static size_t wpa_ft_rate_limit_len(const struct rate_description *rate)
-+{
-+	if (!rate || (!rate->rx && !rate->tx))
-+		return 0;
-+
-+	return (sizeof(struct ft_rrb_tlv) + 8);
-+}
-+
- 
- static size_t wpa_ft_vlan_lin(const struct vlan_description *vlan,
- 			      u8 *start, u8 *endpos)
-@@ -434,10 +442,48 @@ static size_t wpa_ft_vlan_lin(const stru
- }
- 
- 
-+static size_t wpa_ft_rate_limit_lin(const struct rate_description *rate,
-+				    u8 *start, u8 *endpos)
-+{
-+	size_t tlv_len;
-+	int i, len;
-+	struct ft_rrb_tlv *hdr;
-+	u8 *pos = start;
-+
-+	if (!rate)
-+		return 0;
-+
-+	tlv_len = 0;
-+	if (rate->rx || rate->tx) {
-+		tlv_len += sizeof(*hdr);
-+		if (start + tlv_len > endpos)
-+			return tlv_len;
-+		hdr = (struct ft_rrb_tlv *) pos;
-+		hdr->type = host_to_le16(FT_RRB_RATE_LIMIT);
-+		hdr->len = host_to_le16(2 * sizeof(le32));
-+		pos = start + tlv_len;
-+
-+		tlv_len += sizeof(u32);
-+		if (start + tlv_len > endpos)
-+			return tlv_len;
-+		WPA_PUT_LE32(pos, rate->rx);
-+		pos = start + tlv_len;
-+		tlv_len += sizeof(u32);
-+		if (start + tlv_len > endpos)
-+			return tlv_len;
-+		WPA_PUT_LE32(pos, rate->tx);
-+		pos = start + tlv_len;
-+	}
-+
-+	return tlv_len;
-+}
-+
-+
- static int wpa_ft_rrb_lin(const struct tlv_list *tlvs1,
- 			  const struct tlv_list *tlvs2,
- 			  const struct vlan_description *vlan,
--			  u8 **plain, size_t *plain_len)
-+			  u8 **plain, size_t *plain_len,
-+			  const struct rate_description *rate)
- {
- 	u8 *pos, *endpos;
- 	size_t tlv_len;
-@@ -445,6 +491,7 @@ static int wpa_ft_rrb_lin(const struct t
- 	tlv_len = wpa_ft_tlv_len(tlvs1);
- 	tlv_len += wpa_ft_tlv_len(tlvs2);
- 	tlv_len += wpa_ft_vlan_len(vlan);
-+	tlv_len += wpa_ft_rate_limit_len(rate);
- 
- 	*plain_len = tlv_len;
- 	*plain = os_zalloc(tlv_len);
-@@ -458,6 +505,7 @@ static int wpa_ft_rrb_lin(const struct t
- 	pos += wpa_ft_tlv_lin(tlvs1, pos, endpos);
- 	pos += wpa_ft_tlv_lin(tlvs2, pos, endpos);
- 	pos += wpa_ft_vlan_lin(vlan, pos, endpos);
-+	pos += wpa_ft_rate_limit_lin(rate, pos, endpos);
- 
- 	/* validity check */
- 	if (pos != endpos) {
-@@ -526,7 +574,8 @@ static int wpa_ft_rrb_build(const u8 *ke
- 			    const struct tlv_list *tlvs_auth,
- 			    const struct vlan_description *vlan,
- 			    const u8 *src_addr, u8 type,
--			    u8 **packet, size_t *packet_len)
-+			    u8 **packet, size_t *packet_len,
-+			    const struct rate_description *rate)
- {
- 	u8 *plain = NULL, *auth = NULL, *pos, *tmp;
- 	size_t plain_len = 0, auth_len = 0;
-@@ -534,10 +583,10 @@ static int wpa_ft_rrb_build(const u8 *ke
- 	size_t pad_len = 0;
- 
- 	*packet = NULL;
--	if (wpa_ft_rrb_lin(tlvs_enc0, tlvs_enc1, vlan, &plain, &plain_len) < 0)
-+	if (wpa_ft_rrb_lin(tlvs_enc0, tlvs_enc1, vlan, &plain, &plain_len, rate) < 0)
- 		goto out;
- 
--	if (wpa_ft_rrb_lin(tlvs_auth, NULL, NULL, &auth, &auth_len) < 0)
-+	if (wpa_ft_rrb_lin(tlvs_auth, NULL, NULL, &auth, &auth_len, NULL) < 0)
- 		goto out;
- 
- 	*packet_len = sizeof(u16) + auth_len + plain_len;
-@@ -700,6 +749,24 @@ static int wpa_ft_get_vlan(struct wpa_au
- }
- 
- 
-+static int wpa_ft_get_rate_limit(struct wpa_authenticator *wpa_auth,
-+				 const u8 *sta_addr, struct rate_description *rate)
-+{
-+	if (!wpa_auth->cb->get_rate_limit)
-+		return -1;
-+	return wpa_auth->cb->get_rate_limit(wpa_auth->cb_ctx, sta_addr, rate);
-+}
-+
-+
-+static int wpa_ft_set_rate_limit(struct wpa_authenticator *wpa_auth,
-+				 const u8 *sta_addr, struct rate_description *rate)
-+{
-+	if (!wpa_auth->cb->set_rate_limit)
-+		return -1;
-+	return wpa_auth->cb->set_rate_limit(wpa_auth->cb_ctx, sta_addr, rate);
-+}
-+
-+
- static int
- wpa_ft_set_identity(struct wpa_authenticator *wpa_auth, const u8 *sta_addr,
- 		    const u8 *identity, size_t identity_len)
-@@ -1025,7 +1092,7 @@ wpa_ft_rrb_seq_req(struct wpa_authentica
- 
- 	if (wpa_ft_rrb_build(key, key_len, NULL, NULL, seq_req_auth, NULL,
- 			     wpa_auth->addr, FT_PACKET_R0KH_R1KH_SEQ_REQ,
--			     &packet, &packet_len) < 0) {
-+			     &packet, &packet_len, NULL) < 0) {
- 		item = NULL; /* some other seq resp might still accept this */
- 		goto err;
- 	}
-@@ -1208,6 +1275,7 @@ struct wpa_ft_pmk_r0_sa {
- 	u8 spa[ETH_ALEN];
- 	int pairwise; /* Pairwise cipher suite, WPA_CIPHER_* */
- 	struct vlan_description *vlan;
-+	struct rate_description *rate;
- 	os_time_t expiration; /* 0 for no expiration */
- 	u8 *identity;
- 	size_t identity_len;
-@@ -1226,6 +1294,7 @@ struct wpa_ft_pmk_r1_sa {
- 	u8 spa[ETH_ALEN];
- 	int pairwise; /* Pairwise cipher suite, WPA_CIPHER_* */
- 	struct vlan_description *vlan;
-+	struct rate_description *rate;
- 	u8 *identity;
- 	size_t identity_len;
- 	u8 *radius_cui;
-@@ -1254,6 +1323,7 @@ static void wpa_ft_free_pmk_r0(struct wp
- 
- 	os_memset(r0->pmk_r0, 0, PMK_LEN_MAX);
- 	os_free(r0->vlan);
-+	os_free(r0->rate);
- 	os_free(r0->identity);
- 	os_free(r0->radius_cui);
- 	os_free(r0);
-@@ -1307,6 +1377,7 @@ static void wpa_ft_free_pmk_r1(struct wp
- 	eloop_cancel_timeout(wpa_ft_expire_pmk_r1, r1, NULL);
- 
- 	os_memset(r1->pmk_r1, 0, PMK_LEN_MAX);
-+	os_free(r1->rate);
- 	os_free(r1->vlan);
- 	os_free(r1->identity);
- 	os_free(r1->radius_cui);
-@@ -1360,7 +1431,8 @@ static int wpa_ft_store_pmk_r0(struct wp
- 			       const struct vlan_description *vlan,
- 			       int expires_in, int session_timeout,
- 			       const u8 *identity, size_t identity_len,
--			       const u8 *radius_cui, size_t radius_cui_len)
-+			       const u8 *radius_cui, size_t radius_cui_len,
-+			       struct rate_description *rate)
- {
- 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
- 	struct wpa_ft_pmk_r0_sa *r0;
-@@ -1388,6 +1460,14 @@ static int wpa_ft_store_pmk_r0(struct wp
- 		}
- 		*r0->vlan = *vlan;
- 	}
-+	if (rate) {
-+		r0->rate = os_zalloc(sizeof(*rate));
-+		if (!r0->rate) {
-+			bin_clear_free(r0, sizeof(*r0));
-+			return -1;
-+		}
-+		*r0->rate = *rate;
-+	}
- 	if (identity) {
- 		r0->identity = os_malloc(identity_len);
- 		if (r0->identity) {
-@@ -1447,7 +1527,8 @@ static int wpa_ft_store_pmk_r1(struct wp
- 			       const struct vlan_description *vlan,
- 			       int expires_in, int session_timeout,
- 			       const u8 *identity, size_t identity_len,
--			       const u8 *radius_cui, size_t radius_cui_len)
-+			       const u8 *radius_cui, size_t radius_cui_len,
-+			       struct rate_description *rate)
- {
- 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
- 	int max_expires_in = wpa_auth->conf.r1_max_key_lifetime;
-@@ -1477,6 +1558,14 @@ static int wpa_ft_store_pmk_r1(struct wp
- 		}
- 		*r1->vlan = *vlan;
- 	}
-+	if (rate) {
-+		r1->rate = os_zalloc(sizeof(*rate));
-+		if (!r1->rate) {
-+			bin_clear_free(r1, sizeof(*r1));
-+			return -1;
-+		}
-+		*r1->rate = *rate;
-+	}
- 	if (identity) {
- 		r1->identity = os_malloc(identity_len);
- 		if (r1->identity) {
-@@ -1513,7 +1602,7 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
- 			struct vlan_description *vlan,
- 			const u8 **identity, size_t *identity_len,
- 			const u8 **radius_cui, size_t *radius_cui_len,
--			int *session_timeout)
-+			int *session_timeout, struct rate_description *rate)
- {
- 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
- 	struct wpa_ft_pmk_r1_sa *r1;
-@@ -1533,6 +1622,12 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
- 				*vlan = *r1->vlan;
- 			if (vlan && !r1->vlan)
- 				os_memset(vlan, 0, sizeof(*vlan));
-+			if (rate) {
-+				if (r1->rate)
-+					*rate = *r1->rate;
-+				else
-+					memset(rate, 0, sizeof(*rate));
-+			}
- 			if (identity && identity_len) {
- 				*identity = r1->identity;
- 				*identity_len = r1->identity_len;
-@@ -2059,7 +2154,7 @@ static int wpa_ft_pull_pmk_r1(struct wpa
- 
- 	if (wpa_ft_rrb_build(key, key_len, req_enc, NULL, req_auth, NULL,
- 			     sm->wpa_auth->addr, FT_PACKET_R0KH_R1KH_PULL,
--			     &packet, &packet_len) < 0)
-+			     &packet, &packet_len, NULL) < 0)
- 		return -1;
- 
- 	ft_pending_req_ies = wpabuf_alloc_copy(ies, ies_len);
-@@ -2088,6 +2183,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- {
- 	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
- 	struct vlan_description vlan;
-+	struct rate_description rate;
- 	const u8 *identity, *radius_cui;
- 	size_t identity_len, radius_cui_len;
- 	int session_timeout;
-@@ -2099,6 +2195,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- 			   MAC2STR(sm->addr));
- 		return -1;
- 	}
-+	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
- 
- 	identity_len = wpa_ft_get_identity(sm->wpa_auth, sm->addr, &identity);
- 	radius_cui_len = wpa_ft_get_radius_cui(sm->wpa_auth, sm->addr,
-@@ -2108,7 +2205,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- 	return wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, pmk_r0_len,
- 				   pmk_r0_name, sm->pairwise, &vlan, expires_in,
- 				   session_timeout, identity, identity_len,
--				   radius_cui, radius_cui_len);
-+				   radius_cui, radius_cui_len, &rate);
- }
- 
- 
-@@ -2172,6 +2269,7 @@ void wpa_auth_ft_store_keys(struct wpa_s
- 	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
- 	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
- 	struct vlan_description vlan;
-+	struct rate_description rate;
- 	const u8 *identity, *radius_cui;
- 	size_t identity_len, radius_cui_len;
- 	int session_timeout;
-@@ -2185,6 +2283,8 @@ void wpa_auth_ft_store_keys(struct wpa_s
- 		return;
- 	}
- 
-+	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
-+
- 	identity_len = wpa_ft_get_identity(sm->wpa_auth, sm->addr, &identity);
- 	radius_cui_len = wpa_ft_get_radius_cui(sm->wpa_auth, sm->addr,
- 					       &radius_cui);
-@@ -2195,11 +2295,12 @@ void wpa_auth_ft_store_keys(struct wpa_s
- 			    pmk_r0_name,
- 			    sm->pairwise, &vlan, expires_in,
- 			    session_timeout, identity, identity_len,
--			    radius_cui, radius_cui_len);
-+			    radius_cui, radius_cui_len, &rate);
- 	wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, key_len,
- 			    sm->pmk_r1_name, sm->pairwise, &vlan,
- 			    expires_in, session_timeout, identity,
--			    identity_len, radius_cui, radius_cui_len);
-+			    identity_len, radius_cui, radius_cui_len,
-+			    &rate);
- }
- 
- 
-@@ -3100,7 +3201,8 @@ static int wpa_ft_local_derive_pmk_r1(st
- 				      const u8 **radius_cui,
- 				      size_t *radius_cui_len,
- 				      int *out_session_timeout,
--				      size_t *pmk_r1_len)
-+				      size_t *pmk_r1_len,
-+				      struct rate_description *rate)
- {
- 	struct wpa_auth_config *conf = &wpa_auth->conf;
- 	const struct wpa_ft_pmk_r0_sa *r0;
-@@ -3136,7 +3238,8 @@ static int wpa_ft_local_derive_pmk_r1(st
- 			    out_pmk_r1_name,
- 			    sm->pairwise, r0->vlan, expires_in, session_timeout,
- 			    r0->identity, r0->identity_len,
--			    r0->radius_cui, r0->radius_cui_len);
-+			    r0->radius_cui, r0->radius_cui_len,
-+			    r0->rate);
- 
- 	*out_pairwise = sm->pairwise;
- 	if (vlan) {
-@@ -3146,6 +3249,13 @@ static int wpa_ft_local_derive_pmk_r1(st
- 			os_memset(vlan, 0, sizeof(*vlan));
- 	}
- 
-+	if (rate) {
-+		if (r0->rate)
-+			*rate = *r0->rate;
-+		else
-+			os_memset(rate, 0, sizeof(*rate));
-+	}
-+
- 	if (identity && identity_len) {
- 		*identity = r0->identity;
- 		*identity_len = r0->identity_len;
-@@ -3178,6 +3288,7 @@ static int wpa_ft_process_auth_req(struc
- 	u8 *pos, *end;
- 	int pairwise, session_timeout = 0;
- 	struct vlan_description vlan;
-+	struct rate_description rate = {};
- 	const u8 *identity, *radius_cui;
- 	size_t identity_len = 0, radius_cui_len = 0;
- 	size_t pmk_r1_len, kdk_len, len;
-@@ -3274,7 +3385,7 @@ static int wpa_ft_process_auth_req(struc
- 					pmk_r1, &pmk_r1_len, &pairwise, &vlan,
- 					&identity, &identity_len, &radius_cui,
- 					&radius_cui_len,
--					&session_timeout) == 0) {
-+					&session_timeout, &rate) == 0) {
- 			wpa_printf(MSG_DEBUG,
- 				   "FT: Found PMKR1Name (using SHA%zu) from local cache",
- 				   pmk_r1_len * 8);
-@@ -3290,7 +3401,7 @@ static int wpa_ft_process_auth_req(struc
- 				       pmk_r1_name, pmk_r1, &pairwise,
- 				       &vlan, &identity, &identity_len,
- 				       &radius_cui, &radius_cui_len,
--				       &session_timeout, &pmk_r1_len) == 0) {
-+				       &session_timeout, &pmk_r1_len, &rate) == 0) {
- 		wpa_printf(MSG_DEBUG,
- 			   "FT: Generated PMK-R1 based on local PMK-R0");
- 		goto pmk_r1_derived;
-@@ -3392,6 +3503,7 @@ pmk_r1_derived:
- 		wpa_printf(MSG_DEBUG, "FT: Failed to configure VLAN");
- 		goto out;
- 	}
-+	wpa_ft_set_rate_limit(sm->wpa_auth, sm->addr, &rate);
- 	if (wpa_ft_set_identity(sm->wpa_auth, sm->addr,
- 				identity, identity_len) < 0 ||
- 	    wpa_ft_set_radius_cui(sm->wpa_auth, sm->addr,
-@@ -3973,7 +4085,7 @@ static int wpa_ft_rrb_build_r0(const u8
- 
- 	ret = wpa_ft_rrb_build(key, key_len, tlvs, sess_tlv, tlv_auth,
- 			       pmk_r0->vlan, src_addr, type,
--			       packet, packet_len);
-+			       packet, packet_len, pmk_r0->rate);
- 
- 	forced_memzero(pmk_r1, sizeof(pmk_r1));
- 
-@@ -4113,7 +4225,7 @@ static int wpa_ft_rrb_rx_pull(struct wpa
- 		ret = wpa_ft_rrb_build(key, key_len, resp, NULL, resp_auth,
- 				       NULL, wpa_auth->addr,
- 				       FT_PACKET_R0KH_R1KH_RESP,
--				       &packet, &packet_len);
-+				       &packet, &packet_len, NULL);
- 	} else {
- 		ret = wpa_ft_rrb_build_r0(key, key_len, resp, r0, f_r1kh_id,
- 					  f_s1kh_id, resp_auth, wpa_auth->addr,
-@@ -4165,11 +4277,15 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
- 	size_t f_expires_in_len;
- 	size_t f_identity_len, f_radius_cui_len;
- 	size_t f_session_timeout_len;
-+	size_t f_rate_len;
-+	const u8 *f_rate;
- 	int pairwise;
- 	int ret = -1;
- 	int expires_in;
- 	int session_timeout;
- 	struct vlan_description vlan;
-+	struct rate_description rate;
-+	int has_rate = 0;
- 	size_t pmk_r1_len;
- 
- 	RRB_GET_AUTH(FT_RRB_R0KH_ID, r0kh_id, msgtype, -1);
-@@ -4279,6 +4395,13 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
- 	wpa_printf(MSG_DEBUG, "FT: vlan %d%s",
- 		   le_to_host16(vlan.untagged), vlan.tagged[0] ? "+" : "");
- 
-+	RRB_GET_OPTIONAL(FT_RRB_RATE_LIMIT, rate, msgtype, 2 * sizeof(le32));
-+	if (f_rate) {
-+		memcpy(&rate, f_rate, sizeof(rate));
-+		rate.rx = le_to_host32(rate.rx);
-+		rate.tx = le_to_host32(rate.tx);
-+		has_rate = 1;
-+	};
- 	RRB_GET_OPTIONAL(FT_RRB_IDENTITY, identity, msgtype, -1);
- 	if (f_identity)
- 		wpa_hexdump_ascii(MSG_DEBUG, "FT: Identity", f_identity,
-@@ -4301,7 +4424,7 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
- 				f_pmk_r1_name,
- 				pairwise, &vlan, expires_in, session_timeout,
- 				f_identity, f_identity_len, f_radius_cui,
--				f_radius_cui_len) < 0)
-+				f_radius_cui_len, has_rate ? &rate : 0) < 0)
- 		goto out;
- 
- 	ret = 0;
-@@ -4614,7 +4737,7 @@ static int wpa_ft_rrb_rx_seq_req(struct
- 
- 	if (wpa_ft_rrb_build(key, key_len, NULL, NULL, seq_resp_auth, NULL,
- 			     wpa_auth->addr, FT_PACKET_R0KH_R1KH_SEQ_RESP,
--			     &packet, &packet_len) < 0)
-+			     &packet, &packet_len, NULL) < 0)
- 		goto out;
- 
- 	wpa_ft_rrb_oui_send(wpa_auth, src_addr,

feeds/hostapd/hostapd/patches/760-dynamic_own_ip.patch

@@ -1,109 +0,0 @@
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -310,6 +310,7 @@ struct hostapd_bss_config {
- 	unsigned int eap_sim_db_timeout;
- 	int eap_server_erp; /* Whether ERP is enabled on internal EAP server */
- 	struct hostapd_ip_addr own_ip_addr;
-+	int dynamic_own_ip_addr;
- 	char *nas_identifier;
- 	struct hostapd_radius_servers *radius;
- 	int acct_interim_interval;
---- a/src/radius/radius_client.c
-+++ b/src/radius/radius_client.c
-@@ -163,6 +163,8 @@ struct radius_client_data {
- 	 */
- 	void *ctx;
- 
-+	struct hostapd_ip_addr local_ip;
-+
- 	/**
- 	 * conf - RADIUS client configuration (list of RADIUS servers to use)
- 	 */
-@@ -720,6 +722,30 @@ static void radius_client_list_add(struc
- 
- 
- /**
-+ * radius_client_send - Get local address for the RADIUS auth socket
-+ * @radius: RADIUS client context from radius_client_init()
-+ * @addr: pointer to store the address
-+ *
-+ * This function returns the local address for the connection to the RADIUS
-+ * auth server. It also opens the socket if it's not available yet.
-+ */
-+int radius_client_get_local_addr(struct radius_client_data *radius,
-+				 struct hostapd_ip_addr *addr)
-+{
-+	struct hostapd_radius_servers *conf = radius->conf;
-+
-+	if (conf->auth_server && radius->auth_sock < 0)
-+		radius_client_init_auth(radius);
-+
-+	if (radius->auth_sock < 0)
-+		return -1;
-+
-+	memcpy(addr, &radius->local_ip, sizeof(*addr));
-+
-+	return 0;
-+}
-+
-+/**
-  * radius_client_send - Send a RADIUS request
-  * @radius: RADIUS client context from radius_client_init()
-  * @msg: RADIUS message to be sent
-@@ -1238,6 +1264,10 @@ radius_change_server(struct radius_clien
- 			wpa_printf(MSG_DEBUG, "RADIUS local address: %s:%u",
- 				   inet_ntoa(claddr.sin_addr),
- 				   ntohs(claddr.sin_port));
-+			if (auth) {
-+				radius->local_ip.af = AF_INET;
-+				radius->local_ip.u.v4 = claddr.sin_addr;
-+			}
- 		}
- 		break;
- #ifdef CONFIG_IPV6
-@@ -1249,6 +1279,10 @@ radius_change_server(struct radius_clien
- 				   inet_ntop(AF_INET6, &claddr6.sin6_addr,
- 					     abuf, sizeof(abuf)),
- 				   ntohs(claddr6.sin6_port));
-+			if (auth) {
-+				radius->local_ip.af = AF_INET6;
-+				radius->local_ip.u.v6 = claddr6.sin6_addr;
-+			}
- 		}
- 		break;
- 	}
---- a/src/radius/radius_client.h
-+++ b/src/radius/radius_client.h
-@@ -249,6 +249,8 @@ int radius_client_register(struct radius
- void radius_client_set_interim_error_cb(struct radius_client_data *radius,
- 					void (*cb)(const u8 *addr, void *ctx),
- 					void *ctx);
-+int radius_client_get_local_addr(struct radius_client_data *radius,
-+				 struct hostapd_ip_addr * addr);
- int radius_client_send(struct radius_client_data *radius,
- 		       struct radius_msg *msg,
- 		       RadiusType msg_type, const u8 *addr);
---- a/src/ap/ieee802_1x.c
-+++ b/src/ap/ieee802_1x.c
-@@ -598,6 +598,10 @@ int add_common_radius_attr(struct hostap
- 	struct hostapd_radius_attr *attr;
- 	int len;
- 
-+	if (hapd->conf->dynamic_own_ip_addr)
-+		radius_client_get_local_addr(hapd->radius,
-+					     &hapd->conf->own_ip_addr);
-+
- 	if (!hostapd_config_get_radius_attr(req_attr,
- 					    RADIUS_ATTR_NAS_IP_ADDRESS) &&
- 	    hapd->conf->own_ip_addr.af == AF_INET &&
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -2688,6 +2688,8 @@ static int hostapd_config_fill(struct ho
- 	} else if (os_strcmp(buf, "iapp_interface") == 0) {
- 		wpa_printf(MSG_INFO, "DEPRECATED: iapp_interface not used");
- #endif /* CONFIG_IAPP */
-+	} else if (os_strcmp(buf, "dynamic_own_ip_addr") == 0) {
-+		bss->dynamic_own_ip_addr = atoi(pos);
- 	} else if (os_strcmp(buf, "own_ip_addr") == 0) {
- 		if (hostapd_parse_ip_addr(pos, &bss->own_ip_addr)) {
- 			wpa_printf(MSG_ERROR,

feeds/hostapd/hostapd/patches/761-shared_das_port.patch

@@ -1,298 +0,0 @@
---- a/src/radius/radius_das.h
-+++ b/src/radius/radius_das.h
-@@ -44,6 +44,7 @@ struct radius_das_attrs {
- struct radius_das_conf {
- 	int port;
- 	const u8 *shared_secret;
-+	const u8 *nas_identifier;
- 	size_t shared_secret_len;
- 	const struct hostapd_ip_addr *client_addr;
- 	unsigned int time_window;
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -1423,6 +1423,7 @@ int hostapd_setup_bss(struct hostapd_dat
- 
- 			os_memset(&das_conf, 0, sizeof(das_conf));
- 			das_conf.port = conf->radius_das_port;
-+			das_conf.nas_identifier = conf->nas_identifier;
- 			das_conf.shared_secret = conf->radius_das_shared_secret;
- 			das_conf.shared_secret_len =
- 				conf->radius_das_shared_secret_len;
---- a/src/radius/radius_das.c
-+++ b/src/radius/radius_das.c
-@@ -12,13 +12,26 @@
- #include "utils/common.h"
- #include "utils/eloop.h"
- #include "utils/ip_addr.h"
-+#include "utils/list.h"
- #include "radius.h"
- #include "radius_das.h"
- 
- 
--struct radius_das_data {
-+static struct dl_list das_ports = DL_LIST_HEAD_INIT(das_ports);
-+
-+struct radius_das_port {
-+	struct dl_list list;
-+	struct dl_list das_data;
-+
-+	int port;
- 	int sock;
-+};
-+
-+struct radius_das_data {
-+	struct dl_list list;
-+	struct radius_das_port *port;
- 	u8 *shared_secret;
-+	u8 *nas_identifier;
- 	size_t shared_secret_len;
- 	struct hostapd_ip_addr client_addr;
- 	unsigned int time_window;
-@@ -378,56 +391,17 @@ fail:
- }
- 
- 
--static void radius_das_receive(int sock, void *eloop_ctx, void *sock_ctx)
-+static void
-+radius_das_receive_msg(struct radius_das_data *das, struct radius_msg *msg,
-+		       struct sockaddr *from, socklen_t fromlen,
-+		       char *abuf, int from_port)
- {
--	struct radius_das_data *das = eloop_ctx;
--	u8 buf[1500];
--	union {
--		struct sockaddr_storage ss;
--		struct sockaddr_in sin;
--#ifdef CONFIG_IPV6
--		struct sockaddr_in6 sin6;
--#endif /* CONFIG_IPV6 */
--	} from;
--	char abuf[50];
--	int from_port = 0;
--	socklen_t fromlen;
--	int len;
--	struct radius_msg *msg, *reply = NULL;
-+	struct radius_msg *reply = NULL;
- 	struct radius_hdr *hdr;
- 	struct wpabuf *rbuf;
-+	struct os_time now;
- 	u32 val;
- 	int res;
--	struct os_time now;
--
--	fromlen = sizeof(from);
--	len = recvfrom(sock, buf, sizeof(buf), 0,
--		       (struct sockaddr *) &from.ss, &fromlen);
--	if (len < 0) {
--		wpa_printf(MSG_ERROR, "DAS: recvfrom: %s", strerror(errno));
--		return;
--	}
--
--	os_strlcpy(abuf, inet_ntoa(from.sin.sin_addr), sizeof(abuf));
--	from_port = ntohs(from.sin.sin_port);
--
--	wpa_printf(MSG_DEBUG, "DAS: Received %d bytes from %s:%d",
--		   len, abuf, from_port);
--	if (das->client_addr.u.v4.s_addr &&
--	    das->client_addr.u.v4.s_addr != from.sin.sin_addr.s_addr) {
--		wpa_printf(MSG_DEBUG, "DAS: Drop message from unknown client");
--		return;
--	}
--
--	msg = radius_msg_parse(buf, len);
--	if (msg == NULL) {
--		wpa_printf(MSG_DEBUG, "DAS: Parsing incoming RADIUS packet "
--			   "from %s:%d failed", abuf, from_port);
--		return;
--	}
--
--	if (wpa_debug_level <= MSG_MSGDUMP)
--		radius_msg_dump(msg);
- 
- 	if (radius_msg_verify_das_req(msg, das->shared_secret,
- 				       das->shared_secret_len,
-@@ -494,9 +468,8 @@ static void radius_das_receive(int sock,
- 			radius_msg_dump(reply);
- 
- 		rbuf = radius_msg_get_buf(reply);
--		res = sendto(das->sock, wpabuf_head(rbuf),
--			     wpabuf_len(rbuf), 0,
--			     (struct sockaddr *) &from.ss, fromlen);
-+		res = sendto(das->port->sock, wpabuf_head(rbuf),
-+			     wpabuf_len(rbuf), 0, from, fromlen);
- 		if (res < 0) {
- 			wpa_printf(MSG_ERROR, "DAS: sendto(to %s:%d): %s",
- 				   abuf, from_port, strerror(errno));
-@@ -508,6 +481,72 @@ fail:
- 	radius_msg_free(reply);
- }
- 
-+static void radius_das_receive(int sock, void *eloop_ctx, void *sock_ctx)
-+{
-+	struct radius_das_port *p = eloop_ctx;
-+	struct radius_das_data *das;
-+	u8 buf[1500];
-+	union {
-+		struct sockaddr_storage ss;
-+		struct sockaddr_in sin;
-+#ifdef CONFIG_IPV6
-+		struct sockaddr_in6 sin6;
-+#endif /* CONFIG_IPV6 */
-+	} from;
-+	struct radius_msg *msg;
-+	size_t nasid_len = 0;
-+	u8 *nasid_buf = NULL;
-+	char abuf[50];
-+	int from_port = 0;
-+	socklen_t fromlen;
-+	int found = 0;
-+	int len;
-+
-+	fromlen = sizeof(from);
-+	len = recvfrom(sock, buf, sizeof(buf), 0,
-+		       (struct sockaddr *) &from.ss, &fromlen);
-+	if (len < 0) {
-+		wpa_printf(MSG_ERROR, "DAS: recvfrom: %s", strerror(errno));
-+		return;
-+	}
-+
-+	os_strlcpy(abuf, inet_ntoa(from.sin.sin_addr), sizeof(abuf));
-+	from_port = ntohs(from.sin.sin_port);
-+
-+	msg = radius_msg_parse(buf, len);
-+	if (msg == NULL) {
-+		wpa_printf(MSG_DEBUG, "DAS: Parsing incoming RADIUS packet "
-+			   "from %s:%d failed", abuf, from_port);
-+		return;
-+	}
-+
-+	wpa_printf(MSG_DEBUG, "DAS: Received %d bytes from %s:%d",
-+		   len, abuf, from_port);
-+
-+	if (wpa_debug_level <= MSG_MSGDUMP)
-+		radius_msg_dump(msg);
-+
-+	radius_msg_get_attr_ptr(msg, RADIUS_ATTR_NAS_IDENTIFIER,
-+				&nasid_buf, &nasid_len, NULL);
-+	dl_list_for_each(das, &p->das_data, struct radius_das_data, list) {
-+		if (das->client_addr.u.v4.s_addr &&
-+		    das->client_addr.u.v4.s_addr != from.sin.sin_addr.s_addr)
-+			continue;
-+
-+		if (das->nas_identifier && nasid_buf &&
-+		    (nasid_len != os_strlen(das->nas_identifier) ||
-+		     os_memcmp(das->nas_identifier, nasid_buf, nasid_len) != 0))
-+			continue;
-+
-+		found = 1;
-+		radius_das_receive_msg(das, msg, (struct sockaddr *)&from.ss,
-+				       fromlen, abuf, from_port);
-+	}
-+
-+	if (!found)
-+		wpa_printf(MSG_DEBUG, "DAS: Drop message from unknown client");
-+}
-+
- 
- static int radius_das_open_socket(int port)
- {
-@@ -533,6 +572,49 @@ static int radius_das_open_socket(int po
- }
- 
- 
-+static struct radius_das_port *
-+radius_das_open_port(int port)
-+{
-+	struct radius_das_port *p;
-+
-+	dl_list_for_each(p, &das_ports, struct radius_das_port, list) {
-+		if (p->port == port)
-+			return p;
-+	}
-+
-+	p = os_zalloc(sizeof(*p));
-+	if (p == NULL)
-+		return NULL;
-+
-+	dl_list_init(&p->das_data);
-+	p->port = port;
-+	p->sock = radius_das_open_socket(port);
-+	if (p->sock < 0)
-+		goto free_port;
-+
-+	if (eloop_register_read_sock(p->sock, radius_das_receive, p, NULL))
-+		goto close_port;
-+
-+	dl_list_add(&das_ports, &p->list);
-+
-+	return p;
-+
-+close_port:
-+	close(p->sock);
-+free_port:
-+	os_free(p);
-+
-+	return NULL;
-+}
-+
-+static void radius_das_close_port(struct radius_das_port *p)
-+{
-+	dl_list_del(&p->list);
-+	eloop_unregister_read_sock(p->sock);
-+	close(p->sock);
-+	free(p);
-+}
-+
- struct radius_das_data *
- radius_das_init(struct radius_das_conf *conf)
- {
-@@ -553,6 +635,8 @@ radius_das_init(struct radius_das_conf *
- 	das->ctx = conf->ctx;
- 	das->disconnect = conf->disconnect;
- 	das->coa = conf->coa;
-+	if (conf->nas_identifier)
-+		das->nas_identifier = os_strdup(conf->nas_identifier);
- 
- 	os_memcpy(&das->client_addr, conf->client_addr,
- 		  sizeof(das->client_addr));
-@@ -565,19 +649,15 @@ radius_das_init(struct radius_das_conf *
- 	}
- 	das->shared_secret_len = conf->shared_secret_len;
- 
--	das->sock = radius_das_open_socket(conf->port);
--	if (das->sock < 0) {
-+	das->port = radius_das_open_port(conf->port);
-+	if (!das->port) {
- 		wpa_printf(MSG_ERROR, "Failed to open UDP socket for RADIUS "
- 			   "DAS");
- 		radius_das_deinit(das);
- 		return NULL;
- 	}
- 
--	if (eloop_register_read_sock(das->sock, radius_das_receive, das, NULL))
--	{
--		radius_das_deinit(das);
--		return NULL;
--	}
-+	dl_list_add(&das->port->das_data, &das->list);
- 
- 	return das;
- }
-@@ -588,11 +668,14 @@ void radius_das_deinit(struct radius_das
- 	if (das == NULL)
- 		return;
- 
--	if (das->sock >= 0) {
--		eloop_unregister_read_sock(das->sock);
--		close(das->sock);
-+	if (das->port) {
-+		dl_list_del(&das->list);
-+
-+		if (dl_list_empty(&das->port->das_data))
-+			radius_das_close_port(das->port);
- 	}
- 
-+	os_free(das->nas_identifier);
- 	os_free(das->shared_secret);
- 	os_free(das);
- }

feeds/hostapd/hostapd/patches/770-radius_server.patch

@@ -1,154 +0,0 @@
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -63,6 +63,10 @@ endif
- OBJS += main.o
- OBJS += config_file.o
- 
-+ifdef CONFIG_RADIUS_SERVER
-+OBJS += radius.o
-+endif
-+
- OBJS += ../src/ap/hostapd.o
- OBJS += ../src/ap/wpa_auth_glue.o
- OBJS += ../src/ap/drv_callbacks.o
---- a/hostapd/main.c
-+++ b/hostapd/main.c
-@@ -40,6 +40,7 @@ struct hapd_global {
- 
- static struct hapd_global global;
- 
-+extern int radius_main(int argc, char **argv);
- 
- #ifndef CONFIG_NO_HOSTAPD_LOGGER
- static void hostapd_logger_cb(void *ctx, const u8 *addr, unsigned int module,
-@@ -771,6 +772,11 @@ int main(int argc, char *argv[])
- 	if (os_program_init())
- 		return -1;
- 
-+#ifdef RADIUS_SERVER
-+	if (strstr(argv[0], "radius"))
-+		return radius_main(argc, argv);
-+#endif
-+
- 	os_memset(&interfaces, 0, sizeof(interfaces));
- 	interfaces.reload_config = hostapd_reload_config;
- 	interfaces.config_read_cb = hostapd_config_read;
---- a/src/radius/radius_server.c
-+++ b/src/radius/radius_server.c
-@@ -63,6 +63,12 @@ struct radius_server_counters {
- 	u32 unknown_acct_types;
- };
- 
-+struct radius_accept_attr {
-+	u8 type;
-+	u16 len;
-+	void *data;
-+};
-+
- /**
-  * struct radius_session - Internal RADIUS server data for a session
-  */
-@@ -90,7 +96,7 @@ struct radius_session {
- 	unsigned int macacl:1;
- 	unsigned int t_c_filtering:1;
- 
--	struct hostapd_radius_attr *accept_attr;
-+	struct radius_accept_attr *accept_attr;
- 
- 	u32 t_c_timestamp; /* Last read T&C timestamp from user DB */
- };
-@@ -394,6 +400,7 @@ static void radius_server_session_free(s
- 	radius_msg_free(sess->last_reply);
- 	os_free(sess->username);
- 	os_free(sess->nas_ip);
-+	os_free(sess->accept_attr);
- 	os_free(sess);
- 	data->num_sess--;
- }
-@@ -554,6 +561,36 @@ radius_server_erp_find_key(struct radius
- }
- #endif /* CONFIG_ERP */
- 
-+static struct radius_accept_attr *
-+radius_server_copy_attr(const struct hostapd_radius_attr *data)
-+{
-+	const struct hostapd_radius_attr *attr;
-+	struct radius_accept_attr *attr_new;
-+	size_t data_size = 0;
-+	void *data_buf;
-+	int n_attr = 1;
-+
-+	for (attr = data; attr; attr = attr->next) {
-+		n_attr++;
-+		data_size += wpabuf_len(attr->val);
-+	}
-+
-+	attr_new = os_zalloc(n_attr * sizeof(*attr) + data_size);
-+	if (!attr_new)
-+		return NULL;
-+
-+	data_buf = &attr_new[n_attr];
-+	for (n_attr = 0, attr = data; attr; attr = attr->next) {
-+		struct radius_accept_attr *cur = &attr_new[n_attr++];
-+
-+		cur->type = attr->type;
-+		cur->len = wpabuf_len(attr->val);
-+		cur->data = memcpy(data_buf, wpabuf_head(attr->val), cur->len);
-+		data_buf += cur->len;
-+	}
-+
-+	return attr_new;
-+}
- 
- static struct radius_session *
- radius_server_get_new_session(struct radius_server_data *data,
-@@ -607,7 +644,7 @@ radius_server_get_new_session(struct rad
- 		eap_user_free(tmp);
- 		return NULL;
- 	}
--	sess->accept_attr = tmp->accept_attr;
-+	sess->accept_attr = radius_server_copy_attr(tmp->accept_attr);
- 	sess->macacl = tmp->macacl;
- 	eap_user_free(tmp);
- 
-@@ -1118,11 +1155,10 @@ radius_server_encapsulate_eap(struct rad
- 	}
- 
- 	if (code == RADIUS_CODE_ACCESS_ACCEPT) {
--		struct hostapd_radius_attr *attr;
--		for (attr = sess->accept_attr; attr; attr = attr->next) {
--			if (!radius_msg_add_attr(msg, attr->type,
--						 wpabuf_head(attr->val),
--						 wpabuf_len(attr->val))) {
-+		struct radius_accept_attr *attr;
-+		for (attr = sess->accept_attr; attr->data; attr++) {
-+			if (!radius_msg_add_attr(msg, attr->type, attr->data,
-+						 attr->len)) {
- 				wpa_printf(MSG_ERROR, "Could not add RADIUS attribute");
- 				radius_msg_free(msg);
- 				return NULL;
-@@ -1211,11 +1247,10 @@ radius_server_macacl(struct radius_serve
- 	}
- 
- 	if (code == RADIUS_CODE_ACCESS_ACCEPT) {
--		struct hostapd_radius_attr *attr;
--		for (attr = sess->accept_attr; attr; attr = attr->next) {
--			if (!radius_msg_add_attr(msg, attr->type,
--						 wpabuf_head(attr->val),
--						 wpabuf_len(attr->val))) {
-+		struct radius_accept_attr *attr;
-+		for (attr = sess->accept_attr; attr->data; attr++) {
-+			if (!radius_msg_add_attr(msg, attr->type, attr->data,
-+						 attr->len)) {
- 				wpa_printf(MSG_ERROR, "Could not add RADIUS attribute");
- 				radius_msg_free(msg);
- 				return NULL;
-@@ -2512,7 +2547,7 @@ static int radius_server_get_eap_user(vo
- 	ret = data->get_eap_user(data->conf_ctx, identity, identity_len,
- 				 phase2, user);
- 	if (ret == 0 && user) {
--		sess->accept_attr = user->accept_attr;
-+		sess->accept_attr = radius_server_copy_attr(user->accept_attr);
- 		sess->remediation = user->remediation;
- 		sess->macacl = user->macacl;
- 		sess->t_c_timestamp = user->t_c_timestamp;

feeds/hostapd/hostapd/patches/800-fix-ap-sta-channel-setup-failed.patch

@@ -1,29 +0,0 @@
-diff --git a/src/common/hw_features_common.c b/src/common/hw_features_common.c
-index ad2aebf..355b4a8 100644
---- a/src/common/hw_features_common.c
-+++ b/src/common/hw_features_common.c
-@@ -615,9 +615,21 @@ int hostapd_set_freq_params(struct hostapd_freq_params *data,
- 			    center_segment0 == channel - 6)
- 				data->center_freq1 = 5000 + center_segment0 * 5;
- 			else {
--				wpa_printf(MSG_ERROR,
--					   "Wrong coupling between HT and VHT/HE channel setting");
--				return -1;
-+				if (channel <= 48)
-+					center_segment0 = 42;
-+				else if (channel <= 64)
-+					center_segment0 = 58;
-+				else if (channel <= 112)
-+					center_segment0 = 106;
-+				else if (channel <= 128)
-+					center_segment0 = 122;
-+				else if (channel <= 144)
-+					center_segment0 = 138;
-+				else if (channel <= 161)
-+					center_segment0 = 155;
-+				else if (channel <= 177)
-+					center_segment0 = 171;
-+				data->center_freq1 = 5000 + center_segment0 * 5;
- 			}
- 		}
- 		break;

feeds/hostapd/hostapd/patches/901-cfg-section.patch

@@ -1,37 +0,0 @@
-Index: hostapd-2023-09-08-e5ccbfc6/hostapd/config_file.c
-===================================================================
---- hostapd-2023-09-08-e5ccbfc6.orig/hostapd/config_file.c
-+++ hostapd-2023-09-08-e5ccbfc6/hostapd/config_file.c
-@@ -2345,6 +2345,8 @@ static int hostapd_config_fill(struct ho
- 			return 1;
- 		}
- 		conf->driver = driver;
-+	} else if (os_strcmp(buf, "uci_section") == 0) {
-+		bss->uci_section = os_strdup(pos);
- 	} else if (os_strcmp(buf, "driver_params") == 0) {
- 		os_free(conf->driver_params);
- 		conf->driver_params = os_strdup(pos);
-Index: hostapd-2023-09-08-e5ccbfc6/src/ap/ap_config.h
-===================================================================
---- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/ap_config.h
-+++ hostapd-2023-09-08-e5ccbfc6/src/ap/ap_config.h
-@@ -287,6 +287,7 @@ struct hostapd_bss_config {
- 	char snoop_iface[IFNAMSIZ + 1];
- 	char vlan_bridge[IFNAMSIZ + 1];
- 	char wds_bridge[IFNAMSIZ + 1];
-+	char *uci_section;
- 	int bridge_hairpin; /* hairpin_mode on bridge members */
- 
- 	enum hostapd_logger_level logger_syslog_level, logger_stdout_level;
-Index: hostapd-2023-09-08-e5ccbfc6/src/ap/ap_config.c
-===================================================================
---- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/ap_config.c
-+++ hostapd-2023-09-08-e5ccbfc6/src/ap/ap_config.c
-@@ -798,6 +798,7 @@ void hostapd_config_free_bss(struct host
- 	os_free(conf->radius_req_attr_sqlite);
- 	os_free(conf->rsn_preauth_interfaces);
- 	os_free(conf->ctrl_interface);
-+	os_free(conf->uci_section);
- 	os_free(conf->config_id);
- 	os_free(conf->ca_cert);
- 	os_free(conf->server_cert);

feeds/hostapd/hostapd/patches/990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch

@@ -1,33 +0,0 @@
-From f0e9f5aab52b3eab85d28338cc996972ced4c39c Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Tue, 17 May 2022 23:07:59 +0200
-Subject: [PATCH] ctrl: make WNM_AP functions dependant on CONFIG_AP
-
-This fixes linking errors found when compiling wpa_supplicant with
-CONFIG_WNM_AP enabled but CONFIG_AP disabled.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- wpa_supplicant/ctrl_iface.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/wpa_supplicant/ctrl_iface.c
-+++ b/wpa_supplicant/ctrl_iface.c
-@@ -12763,7 +12763,7 @@ char * wpa_supplicant_ctrl_iface_process
- 		if (wpas_ctrl_iface_coloc_intf_report(wpa_s, buf + 18))
- 			reply_len = -1;
- #endif /* CONFIG_WNM */
--#ifdef CONFIG_WNM_AP
-+#if defined(CONFIG_AP) && defined(CONFIG_WNM_AP)
- 	} else if (os_strncmp(buf, "DISASSOC_IMMINENT ", 18) == 0) {
- 		if (ap_ctrl_iface_disassoc_imminent(wpa_s, buf + 18))
- 			reply_len = -1;
-@@ -12773,7 +12773,7 @@ char * wpa_supplicant_ctrl_iface_process
- 	} else if (os_strncmp(buf, "BSS_TM_REQ ", 11) == 0) {
- 		if (ap_ctrl_iface_bss_tm_req(wpa_s, buf + 11))
- 			reply_len = -1;
--#endif /* CONFIG_WNM_AP */
-+#endif /* CONFIG_AP && CONFIG_WNM_AP */
- 	} else if (os_strcmp(buf, "FLUSH") == 0) {
- 		wpa_supplicant_ctrl_iface_flush(wpa_s);
- 	} else if (os_strncmp(buf, "RADIO_WORK ", 11) == 0) {

feeds/hostapd/hostapd/patches/991-Fix-OpenWrt-13156.patch

@@ -1,63 +0,0 @@
-From 26cd9bafc1d25e602952ee86cd2a5b8c3a995490 Mon Sep 17 00:00:00 2001
-From: Stijn Tintel <stijn@linux-ipv6.be>
-Date: Fri, 28 Jul 2023 16:27:47 +0300
-Subject: [PATCH] Revert "Do prune_association only after the STA is
- authorized"
-
-Commit e978072baaca ("Do prune_association only after the STA is
-authorized") causes issues when an STA roams from one interface to
-another interface on the same PHY. The mt7915 driver is not able to
-handle this properly. While the commits fixes a DoS, there are other
-devices and drivers with the same limitation, so revert to the orginal
-behavior for now, until we have a better solution in place.
-
-Ref: https://github.com/openwrt/openwrt/issues/13156
-Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
----
- src/ap/hostapd.c  | 14 +++++++++++---
- src/ap/sta_info.c |  3 ---
- 2 files changed, 11 insertions(+), 6 deletions(-)
-
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -3564,6 +3564,8 @@ int hostapd_remove_iface(struct hapd_int
- void hostapd_new_assoc_sta(struct hostapd_data *hapd, struct sta_info *sta,
- 			   int reassoc)
- {
-+	int mld_assoc_link_id = -1;
-+
- 	if (hapd->tkip_countermeasures) {
- 		hostapd_drv_sta_deauth(hapd, sta->addr,
- 				       WLAN_REASON_MICHAEL_MIC_FAILURE);
-@@ -3571,10 +3573,16 @@ void hostapd_new_assoc_sta(struct hostap
- 	}
- 
- #ifdef CONFIG_IEEE80211BE
--	if (hapd->conf->mld_ap && sta->mld_info.mld_sta &&
--	    sta->mld_assoc_link_id != hapd->mld_link_id)
--		return;
-+	if (hapd->conf->mld_ap && sta->mld_info.mld_sta) {
-+		if (sta->mld_assoc_link_id == hapd->mld_link_id) {
-+			mld_assoc_link_id = sta->mld_assoc_link_id;
-+		} else {
-+			return;
-+		}
-+	}
- #endif /* CONFIG_IEEE80211BE */
-+        if (mld_assoc_link_id != -2)
-+		hostapd_prune_associations(hapd, sta->addr, mld_assoc_link_id);
- 
- 	ap_sta_clear_disconnect_timeouts(hapd, sta);
- 	sta->post_csa_sa_query = 0;
---- a/src/ap/sta_info.c
-+++ b/src/ap/sta_info.c
-@@ -1318,9 +1318,6 @@ void ap_sta_set_authorized(struct hostap
- 				mld_assoc_link_id = -2;
- 		}
- #endif /* CONFIG_IEEE80211BE */
--		if (mld_assoc_link_id != -2)
--			hostapd_prune_associations(hapd, sta->addr,
--						   mld_assoc_link_id);
- 		sta->flags |= WLAN_STA_AUTHORIZED;
- 	} else {
- 		sta->flags &= ~WLAN_STA_AUTHORIZED;

feeds/hostapd/hostapd/patches/999-ft-anonce.patch

@@ -1,10 +0,0 @@
---- a/src/ap/wpa_auth_i.h
-+++ b/src/ap/wpa_auth_i.h
-@@ -54,6 +54,7 @@ struct wpa_state_machine {
- 	bool MICVerified;
- 	bool GUpdateStationKeys;
- 	u8 ANonce[WPA_NONCE_LEN];
-+	struct os_reltime ANonce_time;
- 	u8 SNonce[WPA_NONCE_LEN];
- 	u8 alt_SNonce[WPA_NONCE_LEN];
- 	u8 alt_replay_counter[WPA_REPLAY_COUNTER_LEN];

feeds/hostapd/hostapd/patches/999-probe-request.patch

@@ -1,49 +0,0 @@
-Index: hostapd-2021-02-20-59e9794c/hostapd/config_file.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/hostapd/config_file.c
-+++ hostapd-2021-02-20-59e9794c/hostapd/config_file.c
-@@ -3339,6 +3339,8 @@ static int hostapd_config_fill(struct ho
- 		bss->ignore_broadcast_ssid = atoi(pos);
- 	} else if (os_strcmp(buf, "no_probe_resp_if_max_sta") == 0) {
- 		bss->no_probe_resp_if_max_sta = atoi(pos);
-+	} else if (os_strcmp(buf, "dynamic_probe_resp") == 0) {
-+		bss->dynamic_probe_resp = atoi(pos);
- #ifdef CONFIG_WEP
- 	} else if (os_strcmp(buf, "wep_default_key") == 0) {
- 		bss->ssid.wep.idx = atoi(pos);
-Index: hostapd-2021-02-20-59e9794c/src/ap/ap_config.h
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/src/ap/ap_config.h
-+++ hostapd-2021-02-20-59e9794c/src/ap/ap_config.h
-@@ -460,6 +460,7 @@ struct hostapd_bss_config {
- 	int ap_max_inactivity;
- 	int ignore_broadcast_ssid;
- 	int no_probe_resp_if_max_sta;
-+	int dynamic_probe_resp;
- 
- 	int wmm_enabled;
- 	int wmm_uapsd;
-Index: hostapd-2021-02-20-59e9794c/src/ap/beacon.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/src/ap/beacon.c
-+++ hostapd-2021-02-20-59e9794c/src/ap/beacon.c
-@@ -920,7 +920,8 @@ void handle_probe_req(struct hostapd_dat
- 	}
- #endif /* CONFIG_P2P */
- 
--	if (hapd->conf->ignore_broadcast_ssid && elems.ssid_len == 0 &&
-+	if (!hapd->conf->dynamic_probe_resp &&
-+	    hapd->conf->ignore_broadcast_ssid && elems.ssid_len == 0 &&
- 	    elems.ssid_list_len == 0 && elems.short_ssid_list_len == 0) {
- 		wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR " for "
- 			   "broadcast SSID ignored", MAC2STR(mgmt->sa));
-@@ -967,7 +968,8 @@ void handle_probe_req(struct hostapd_dat
- 		return;
- 	}
- 
--	if (hapd->conf->ignore_broadcast_ssid && res == WILDCARD_SSID_MATCH) {
-+	if (!hapd->conf->dynamic_probe_resp &&
-+	    hapd->conf->ignore_broadcast_ssid && res == WILDCARD_SSID_MATCH) {
- 		wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR " for "
- 			   "broadcast SSID ignored", MAC2STR(mgmt->sa));
- 		return;

feeds/hostapd/hostapd/patches/999-re-assoc-event.patch

@@ -1,147 +0,0 @@
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -522,6 +522,7 @@ static void handle_auth_ft_finish(void *
- 
- 	hostapd_logger(hapd, dst, HOSTAPD_MODULE_IEEE80211,
- 		       HOSTAPD_LEVEL_DEBUG, "authentication OK (FT)");
-+	hostapd_ubus_notify(hapd, "ft-finish", sta->addr);
- 	sta->flags |= WLAN_STA_AUTH;
- 	mlme_authenticate_indication(hapd, sta);
- }
-@@ -5273,6 +5274,8 @@ static void handle_assoc(struct hostapd_
- 	}
- 
- 	sta = ap_get_sta(hapd, mgmt->sa);
-+	if (sta && reassoc)
-+		memcpy(sta->origin_ap, mgmt->u.reassoc_req.current_ap, 6);
- #ifdef CONFIG_IEEE80211R_AP
- 	if (sta && sta->auth_alg == WLAN_AUTH_FT &&
- 	    (sta->flags & WLAN_STA_AUTH) == 0) {
-@@ -5426,6 +5429,7 @@ static void handle_assoc(struct hostapd_
- 		.type = HOSTAPD_UBUS_ASSOC_REQ,
- 		.mgmt_frame = mgmt,
- 		.ssi_signal = rssi,
-+		.reassoc = reassoc,
- 	};
- 
- 	/* followed by SSID and Supported rates; and HT capabilities if 802.11n
-@@ -6496,7 +6500,7 @@ static void handle_assoc_cb(struct hosta
- 		 * Open, static WEP, FT protocol, or FILS; no separate
- 		 * authorization step.
- 		 */
--		ap_sta_set_authorized(hapd, sta, 1);
-+		_ap_sta_set_authorized(hapd, sta, 1, reassoc);
- 	}
- 
- 	if (reassoc)
---- a/src/ap/ubus.c
-+++ b/src/ap/ubus.c
-@@ -1870,6 +1870,8 @@ int hostapd_ubus_handle_event(struct hos
- 	if (req->ssi_signal)
- 		blobmsg_add_u32(&b, "signal", req->ssi_signal);
- 	blobmsg_add_u32(&b, "freq", hapd->iface->freq);
-+	if (req->reassoc && req->mgmt_frame)
-+		blobmsg_add_macaddr(&b, "origin", req->mgmt_frame->u.reassoc_req.current_ap);
- 
- 	if (req->elems) {
- 		if(req->elems->ht_capabilities)
-@@ -1940,6 +1942,7 @@ void hostapd_ubus_notify(struct hostapd_
- 	blob_buf_init(&b, 0);
- 	blobmsg_add_macaddr(&b, "address", addr);
- 	blobmsg_add_string(&b, "ifname", hapd->conf->iface);
-+	blobmsg_printf(&b, "target", MACSTR, MAC2STR(hapd->conf->bssid));
- 
- 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
- }
-@@ -1958,7 +1961,7 @@ void hostapd_ubus_notify_csa(struct host
- }
- 
- 
--void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta)
-+void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta, int reassoc)
- {
- 	if (!hapd->ubus.obj.has_subscribers)
- 		return;
-@@ -1975,6 +1978,9 @@ void hostapd_ubus_notify_authorized(stru
- 		blobmsg_add_u32(&b, "", sta->bandwidth[1]);
- 		blobmsg_close_array(&b, r);
- 	}
-+	if (reassoc)
-+		blobmsg_add_macaddr(&b, "origin", sta->origin_ap);
-+	blobmsg_printf(&b, "target", MACSTR, MAC2STR(hapd->conf->bssid));
- 
- 	ubus_notify(ctx, &hapd->ubus.obj, "sta-authorized", b.head, -1);
- }
---- a/src/ap/ubus.h
-+++ b/src/ap/ubus.h
-@@ -22,6 +22,7 @@ struct hostapd_ubus_request {
- 	const struct ieee802_11_elems *elems;
- 	int ssi_signal; /* dBm */
- 	const u8 *addr;
-+	int reassoc;
- };
- 
- struct hostapd_iface;
-@@ -49,7 +50,7 @@ void hostapd_ubus_remove_vlan(struct hos
- 
- int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_request *req);
- void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *mac);
--void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta);
-+void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta, int reassoc);
- void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
- 				       const u8 *addr, u8 token, u8 rep_mode,
- 				       struct rrm_measurement_beacon_report *rep,
---- a/src/ap/sta_info.c
-+++ b/src/ap/sta_info.c
-@@ -1297,8 +1297,8 @@ const u8 * ap_sta_wpa_get_dpp_pkhash(str
- }
- 
- 
--void ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
--			   int authorized)
-+void _ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
-+			    int authorized, int reassoc)
- {
- 	const u8 *dev_addr = NULL;
- 	char buf[100];
-@@ -1404,7 +1404,7 @@ void ap_sta_set_authorized(struct hostap
- 					 dpp_pkhash, SHA256_MAC_LEN);
- 		}
- 
--		hostapd_ubus_notify_authorized(hapd, sta);
-+		hostapd_ubus_notify_authorized(hapd, sta, reassoc);
- 		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s%s%s",
- 			buf, ip_addr, keyid_buf, dpp_pkhash_buf, alg_buf);
- 
-@@ -1434,6 +1434,11 @@ void ap_sta_set_authorized(struct hostap
- 	}
- #endif /* CONFIG_FST */
- }
-+void ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
-+			   int authorized)
-+{
-+	_ap_sta_set_authorized(hapd, sta, authorized, 0);
-+}
- 
- 
- void ap_sta_disconnect(struct hostapd_data *hapd, struct sta_info *sta,
---- a/src/ap/sta_info.h
-+++ b/src/ap/sta_info.h
-@@ -102,6 +102,7 @@ struct sta_info {
- 	struct sta_info *next; /* next entry in sta list */
- 	struct sta_info *hnext; /* next entry in hash table list */
- 	u8 addr[6];
-+	u8 origin_ap[6];
- 	be32 ipaddr;
- 	struct dl_list ip6addr; /* list head for struct ip6addr */
- 	u16 aid; /* STA's unique AID (1 .. 2007) or 0 if not yet assigned */
-@@ -398,6 +399,9 @@ const u8 * ap_sta_wpa_get_dpp_pkhash(str
- void ap_sta_disconnect(struct hostapd_data *hapd, struct sta_info *sta,
- 		       const u8 *addr, u16 reason);
- 
-+void _ap_sta_set_authorized(struct hostapd_data *hapd,
-+			    struct sta_info *sta, int authorized,
-+			    int reassoc);
- void ap_sta_set_authorized(struct hostapd_data *hapd,
- 			   struct sta_info *sta, int authorized);
- static inline int ap_sta_is_authorized(struct sta_info *sta)

feeds/hostapd/hostapd/patches/999-s8-u8.patch

@@ -1,22 +0,0 @@
-Index: hostapd-2023-06-22-599d00be/src/drivers/driver_nl80211.c
-===================================================================
---- hostapd-2023-06-22-599d00be.orig/src/drivers/driver_nl80211.c
-+++ hostapd-2023-06-22-599d00be/src/drivers/driver_nl80211.c
-@@ -7686,7 +7686,7 @@ static int get_sta_handler(struct nl_msg
- 		[NL80211_STA_INFO_BEACON_SIGNAL_AVG] = { .type = NLA_U8},
- 		[NL80211_STA_INFO_RX_DURATION] = { .type = NLA_U64 },
- 		[NL80211_STA_INFO_ACK_SIGNAL] = { .type = NLA_U8 },
--		[NL80211_STA_INFO_ACK_SIGNAL_AVG] = { .type = NLA_S8 },
-+		[NL80211_STA_INFO_ACK_SIGNAL_AVG] = { .type = NLA_U8 },
- 		[NL80211_STA_INFO_RX_MPDUS] = { .type = NLA_U32 },
- 		[NL80211_STA_INFO_FCS_ERROR_COUNT] = { .type = NLA_U32 },
- 		[NL80211_STA_INFO_TX_DURATION] = { .type = NLA_U64 },
-@@ -7792,7 +7792,7 @@ static int get_sta_handler(struct nl_msg
- 	}
- 	if (stats[NL80211_STA_INFO_ACK_SIGNAL_AVG])
- 		data->avg_ack_signal =
--			nla_get_s8(stats[NL80211_STA_INFO_ACK_SIGNAL_AVG]);
-+			nla_get_u8(stats[NL80211_STA_INFO_ACK_SIGNAL_AVG]);
- 	if (stats[NL80211_STA_INFO_RX_MPDUS])
- 		data->rx_mpdus = nla_get_u32(stats[NL80211_STA_INFO_RX_MPDUS]);
- 	if (stats[NL80211_STA_INFO_FCS_ERROR_COUNT])

feeds/hostapd/hostapd/patches/999-ssi_signal.patch

@@ -1,81 +0,0 @@
-Index: hostapd-2023-09-08-e5ccbfc6/src/ap/ieee802_11.c
-===================================================================
---- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/ieee802_11.c
-+++ hostapd-2023-09-08-e5ccbfc6/src/ap/ieee802_11.c
-@@ -59,6 +59,17 @@
- #include "pasn/pasn_common.h"
- 
- 
-+static int
-+ewma(int new, int old)
-+{
-+	#define ALPHA	10
-+	if (!old)
-+		return new;
-+	if (new >= 0)
-+		return old;
-+	return ((ALPHA * new) + ((100 - ALPHA) * old)) / 100;
-+}
-+
- #ifdef CONFIG_FILS
- static struct wpabuf *
- prepare_auth_resp_fils(struct hostapd_data *hapd,
-@@ -5856,7 +5867,7 @@ static int robust_action_frame(u8 catego
- 
- static int handle_action(struct hostapd_data *hapd,
- 			 const struct ieee80211_mgmt *mgmt, size_t len,
--			 unsigned int freq)
-+			 unsigned int freq, int ssi_signal)
- {
- 	struct sta_info *sta;
- 	u8 *action __maybe_unused;
-@@ -5913,6 +5924,7 @@ static int handle_action(struct hostapd_
- 
- 		sta->last_seq_ctrl = seq_ctrl;
- 		sta->last_subtype = WLAN_FC_STYPE_ACTION;
-+		sta->signal_mgmt = ewma(ssi_signal, sta->signal_mgmt);;
- 	}
- 
- 	switch (mgmt->u.action.category) {
-@@ -6089,6 +6101,8 @@ int ieee802_11_mgmt(struct hostapd_data
- 	unsigned int freq;
- 	int ssi_signal = fi ? fi->ssi_signal : 0;
- 
-+	hapd->signal_mgmt = ewma(ssi_signal, hapd->signal_mgmt);;
-+
- 	if (len < 24)
- 		return 0;
- 
-@@ -6196,7 +6210,7 @@ int ieee802_11_mgmt(struct hostapd_data
- 		break;
- 	case WLAN_FC_STYPE_ACTION:
- 		wpa_printf(MSG_DEBUG, "mgmt::action");
--		ret = handle_action(hapd, mgmt, len, freq);
-+		ret = handle_action(hapd, mgmt, len, freq, ssi_signal);
- 		break;
- 	default:
- 		hostapd_logger(hapd, mgmt->sa, HOSTAPD_MODULE_IEEE80211,
-Index: hostapd-2023-09-08-e5ccbfc6/src/ap/sta_info.h
-===================================================================
---- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/sta_info.h
-+++ hostapd-2023-09-08-e5ccbfc6/src/ap/sta_info.h
-@@ -330,6 +330,7 @@ struct sta_info {
- #ifdef CONFIG_PASN
- 	struct pasn_data *pasn;
- #endif /* CONFIG_PASN */
-+	int signal_mgmt;
- 
- #ifdef CONFIG_IEEE80211BE
- 	struct mld_info mld_info;
-Index: hostapd-2023-09-08-e5ccbfc6/src/ap/hostapd.h
-===================================================================
---- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/hostapd.h
-+++ hostapd-2023-09-08-e5ccbfc6/src/ap/hostapd.h
-@@ -494,6 +494,7 @@ struct hostapd_data {
- #ifdef CONFIG_CTRL_IFACE_UDP
-        unsigned char ctrl_iface_cookie[CTRL_IFACE_COOKIE_LEN];
- #endif /* CONFIG_CTRL_IFACE_UDP */
-+       int signal_mgmt;
- };
- 
- 

feeds/hostapd/hostapd/patches/t00-010-ft_refresh.patch

@@ -1,86 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -3152,6 +3152,8 @@ static int hostapd_config_fill(struct ho
- 		bss->ft_over_ds = atoi(pos);
- 	} else if (os_strcmp(buf, "ft_psk_generate_local") == 0) {
- 		bss->ft_psk_generate_local = atoi(pos);
-+	} else if (os_strcmp(buf, "ft_l2_refresh") == 0) {
-+		bss->ft_l2_refresh = atoi(pos);
- #endif /* CONFIG_IEEE80211R_AP */
- #ifndef CONFIG_NO_CTRL_IFACE
- 	} else if (os_strcmp(buf, "ctrl_interface") == 0) {
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -401,6 +401,7 @@ struct hostapd_bss_config {
- 	int pmk_r1_push;
- 	int ft_over_ds;
- 	int ft_psk_generate_local;
-+	int ft_l2_refresh;
- 	int r1_max_key_lifetime;
- #endif /* CONFIG_IEEE80211R_AP */
- 
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -1495,6 +1495,28 @@ static void hostapd_request_radius_psk(v
- #endif /* CONFIG_NO_RADIUS */
- 
- 
-+static void wpa_ft_refresh(void *eloop_data, void *user_data)
-+{
-+	struct hostapd_data *hapd = eloop_data;
-+	struct ft_rrb_frame *frame;
-+	struct l2_ethhdr *buf;
-+	size_t len;
-+
-+	len = sizeof(*buf) + sizeof(*frame);
-+	buf = os_zalloc(len);
-+	frame = (struct ft_rrb_frame *)(buf + 1);
-+	frame->frame_type = RSN_REMOTE_FRAME_TYPE_FT_RRB;
-+	frame->packet_type = FT_PACKET_REQUEST;
-+	memset(buf->h_dest, 0xff, ETH_ALEN);
-+	os_memcpy(buf->h_source, hapd->own_addr, ETH_ALEN);
-+	buf->h_proto = host_to_be16(ETH_P_RRB);
-+	l2_packet_send(hapd->l2, buf->h_dest, ETH_P_RRB, (u8 *) buf, len);
-+	os_free(buf);
-+
-+	eloop_register_timeout(hapd->conf->ft_l2_refresh, 0, wpa_ft_refresh,
-+			       hapd, NULL);
-+}
-+
- int hostapd_setup_wpa(struct hostapd_data *hapd)
- {
- 	struct wpa_auth_config _conf;
-@@ -1640,6 +1662,9 @@ int hostapd_setup_wpa(struct hostapd_dat
- 				   "Failed to open ETH_P_OUI interface");
- 			return -1;
- 		}
-+
-+		if (hapd->conf->ft_l2_refresh)
-+			wpa_ft_refresh(hapd, NULL);
- 	}
- #endif /* CONFIG_IEEE80211R_AP */
- 
-@@ -1655,7 +1680,6 @@ void hostapd_reconfig_wpa(struct hostapd
- 	wpa_reconfig(hapd->wpa_auth, &wpa_auth_conf);
- }
- 
--
- void hostapd_deinit_wpa(struct hostapd_data *hapd)
- {
- 	ieee80211_tkip_countermeasures_deinit(hapd);
-@@ -1679,6 +1703,7 @@ void hostapd_deinit_wpa(struct hostapd_d
- 				   "information element from interface %s",
- 				   hapd->conf->iface);
- 		}
-+
- 	}
- 	ieee802_1x_deinit(hapd);
- 
-@@ -1687,6 +1712,7 @@ void hostapd_deinit_wpa(struct hostapd_d
- 	hostapd_wpa_ft_rrb_rx_later(hapd, NULL); /* flush without delivering */
- 	eloop_cancel_timeout(hostapd_oui_deliver_later, hapd, ELOOP_ALL_CTX);
- 	hostapd_oui_deliver_later(hapd, NULL); /* flush without delivering */
-+	eloop_cancel_timeout(wpa_ft_refresh, hapd, ELOOP_ALL_CTX);
- 	l2_packet_deinit(hapd->l2);
- 	hapd->l2 = NULL;
- 	hostapd_wpa_unregister_ft_oui(hapd);

feeds/hostapd/hostapd/patches/t00-011-owe_ssid_update.patch

@@ -1,27 +0,0 @@
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -1995,6 +1995,13 @@ static int hostapd_owe_iface_iter(struct
- 		    is_zero_ether_addr(bss->own_addr))
- 			continue;
- 
-+		if (!os_memcmp(hapd->conf->owe_transition_bssid, bss->own_addr,
-+			       ETH_ALEN) &&
-+		    hapd->conf->owe_transition_ssid_len == bss->conf->ssid.ssid_len &&
-+		    !os_memcmp(hapd->conf->owe_transition_ssid, bss->conf->ssid.ssid,
-+			       bss->conf->ssid.ssid_len))
-+			return 0;
-+
- 		os_memcpy(hapd->conf->owe_transition_bssid, bss->own_addr,
- 			  ETH_ALEN);
- 		os_memcpy(hapd->conf->owe_transition_ssid,
-@@ -2011,10 +2018,6 @@ static int hostapd_owe_iface_iter(struct
- 
- int hostapd_owe_trans_get_info(struct hostapd_data *hapd)
- {
--	if (hapd->conf->owe_transition_ssid_len > 0 &&
--	    !is_zero_ether_addr(hapd->conf->owe_transition_bssid))
--		return 0;
--
- 	/* Find transition mode SSID/BSSID information from a BSS operated by
- 	 * this hostapd instance. */
- 	if (!hapd->iface->interfaces ||

feeds/hostapd/hostapd/patches/t00-012-hostapd-Fix-DVLAN-802.1x-issue.patch

@@ -1,53 +0,0 @@
-From 98b6503b87bb36bf2f5ae16e52e230e8870c867f Mon Sep 17 00:00:00 2001
-From: Venkat Chimata <venkata@shasta.cloud>
-Date: Fri, 28 Jun 2024 14:39:31 +0530
-Subject: [PATCH] hostapd: Fix DVLAN + 802.1x issue
-
-In case of swconfig switches, the basename of the interface should be based on the last dot.
-Earlier it was done based on the first dot, which would result in incorrect basename.
-For example if the interface name is eth0.4087 then the vlan->ifname would be eth0.4087.  (A dot at the end) .
-Before this patch, the basename was returned as eth0. It should be eth0.4087
-
-Also fixed the return code by adding a default value of 0 and removed an unncessary check
-for if_add before ubus add call.
-
-Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
----
- src/ap/vlan_init.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
-diff --git a/src/ap/vlan_init.c b/src/ap/vlan_init.c
-index 3e27671..cfeb1e5 100644
---- a/src/ap/vlan_init.c
-+++ b/src/ap/vlan_init.c
-@@ -23,7 +23,8 @@ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- 		       int existsok)
- {
- 	bool vlan_exists = iface_exists(vlan->ifname);
--	int ret;
-+	int ret = 0;
-+
- #ifdef CONFIG_WEP
- 	int i;
- 
-@@ -38,7 +39,7 @@ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- #endif /* CONFIG_WEP */
- 
- 	if (!hapd->driver || !hapd->driver->if_add) {
--		char *dot = strstr(vlan->ifname, ".");
-+		char *dot = strrchr(vlan->ifname, '.');
- 		if (dot)
- 			*dot = '\0';
- 		ret = 0;
-@@ -59,7 +60,7 @@ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- 	if (hapd->wpa_auth)
- 		ret = wpa_auth_ensure_group(hapd->wpa_auth, vlan->vlan_id);
- 
--	if (!ret && !vlan_exists && hapd->driver->if_add)
-+	if (!ret && !vlan_exists)
- 		hostapd_ubus_add_vlan(hapd, vlan);
- 
- 	if (ret == 0)
--- 
-2.34.1
-

feeds/hostapd/hostapd/patches/zzz-radius-extended-avp.patch

@@ -1,11 +0,0 @@
---- a/src/radius/radius.c
-+++ b/src/radius/radius.c
-@@ -755,7 +755,7 @@ struct radius_attr_hdr * radius_msg_add_
- 			ext->length = sizeof(*ext) + 1 + alen;
- 			ext->ext_type = ext_type;
- 			wpabuf_put_u8(msg->buf, data_len > alen ? 0x80 : 0);
--			wpabuf_put_data(msg->buf, data, data_len);
-+			wpabuf_put_data(msg->buf, data, alen);
- 			data += alen;
- 			data_len -= alen;
- 			if (radius_msg_add_attr_to_array(

feeds/hostapd/hostapd/patches/zzz-roaming-key.patch

@@ -1,69 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -3154,6 +3154,8 @@ static int hostapd_config_fill(struct ho
- 		bss->ft_psk_generate_local = atoi(pos);
- 	} else if (os_strcmp(buf, "ft_l2_refresh") == 0) {
- 		bss->ft_l2_refresh = atoi(pos);
-+	} else if (os_strcmp(buf, "ft_key") == 0) {
-+		strncpy(bss->ft_key, pos, sizeof(bss->ft_key));
- #endif /* CONFIG_IEEE80211R_AP */
- #ifndef CONFIG_NO_CTRL_IFACE
- 	} else if (os_strcmp(buf, "ctrl_interface") == 0) {
-@@ -4996,8 +4998,22 @@ struct hostapd_config * hostapd_config_r
- 
- 	fclose(f);
- 
--	for (i = 0; i < conf->num_bss; i++)
-+	for (i = 0; i < conf->num_bss; i++) {
-+		if (*conf->bss[i]->ft_key) {
-+			u8 buffer[128];
-+			sprintf(buffer, "%02X:%02X:%02X:%02X:%02X:%02X %02X%02X%02X%02X%02X%02X %s", MAC2STR(conf->bss[i]->bssid), MAC2STR(conf->bss[i]->bssid), conf->bss[i]->ft_key);
-+			add_r0kh(conf->bss[i], buffer);
-+			sprintf(buffer, "%02X:%02X:%02X:%02X:%02X:%02X %02X:%02X:%02X:%02X:%02X:%02X %s", MAC2STR(conf->bss[i]->bssid), MAC2STR(conf->bss[i]->bssid), conf->bss[i]->ft_key);
-+			add_r1kh(conf->bss[i], buffer);
-+			sprintf(buffer, "ff:ff:ff:ff:ff:ff * %s", conf->bss[i]->ft_key);
-+			add_r0kh(conf->bss[i], buffer);
-+			sprintf(buffer, "00:00:00:00:00:00 00:00:00:00:00:00 %s", conf->bss[i]->ft_key);
-+			add_r1kh(conf->bss[i], buffer);
-+			hexstr2bin(conf->bss[i]->bssid, conf->bss[i]->r1_key_holder, FT_R1KH_ID_LEN); 
-+			conf->bss[i]->r0_key_holder_bssid = 1;
-+		}
- 		hostapd_set_security_params(conf->bss[i], 1);
-+	}
- 
- 	if (hostapd_config_check(conf, 1))
- 		errors++;
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -403,6 +403,7 @@ struct hostapd_bss_config {
- 	int ft_psk_generate_local;
- 	int ft_l2_refresh;
- 	int r1_max_key_lifetime;
-+	u8 ft_key[65];
- #endif /* CONFIG_IEEE80211R_AP */
- 
- 	char *ctrl_interface; /* directory for UNIX domain sockets */
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -390,6 +390,7 @@ struct hostapd_bss_config {
- 	/* IEEE 802.11r - Fast BSS Transition */
- 	u8 mobility_domain[MOBILITY_DOMAIN_ID_LEN];
- 	u8 r1_key_holder[FT_R1KH_ID_LEN];
-+	int r0_key_holder_bssid;
- 	u32 r0_key_lifetime; /* PMK-R0 lifetime seconds */
- 	int rkh_pos_timeout;
- 	int rkh_neg_timeout;
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -80,7 +80,10 @@ static void hostapd_wpa_auth_conf(struct
- 	os_memcpy(wconf->ssid, conf->ssid.ssid, wconf->ssid_len);
- 	os_memcpy(wconf->mobility_domain, conf->mobility_domain,
- 		  MOBILITY_DOMAIN_ID_LEN);
--	if (conf->nas_identifier &&
-+	if (1 || conf->r0_key_holder_bssid) {
-+		sprintf(wconf->r0_key_holder, "%02X%02X%02X%02X%02X%02X", MAC2STR(conf->bssid));
-+		wconf->r0_key_holder_len = 12;
-+	} else if (conf->nas_identifier &&
- 	    os_strlen(conf->nas_identifier) <= FT_R0KH_ID_MAX_LEN) {
- 		wconf->r0_key_holder_len = os_strlen(conf->nas_identifier);
- 		os_memcpy(wconf->r0_key_holder, conf->nas_identifier,

feeds/hostapd/hostapd/src/hostapd/radius.c

@@ -1,719 +0,0 @@
-#include "utils/includes.h"
-#include "utils/common.h"
-#include "utils/eloop.h"
-#include "crypto/crypto.h"
-#include "crypto/tls.h"
-
-#include "ap/ap_config.h"
-#include "eap_server/eap.h"
-#include "radius/radius.h"
-#include "radius/radius_server.h"
-#include "eap_register.h"
-
-#include <libubox/blobmsg_json.h>
-#include <libubox/blobmsg.h>
-#include <libubox/avl.h>
-#include <libubox/avl-cmp.h>
-#include <libubox/kvlist.h>
-
-#include <sys/stat.h>
-#include <fnmatch.h>
-
-#define VENDOR_ID_WISPR 14122
-#define VENDOR_ATTR_SIZE 6
-
-struct radius_parse_attr_data {
-	unsigned int vendor;
-	u8 type;
-	int size;
-	char format;
-	const char *data;
-};
-
-struct radius_parse_attr_state {
-	struct hostapd_radius_attr *prev;
-	struct hostapd_radius_attr *attr;
-	struct wpabuf *buf;
-	void *attrdata;
-};
-
-struct radius_user_state {
-	struct avl_node node;
-	struct eap_user data;
-};
-
-struct radius_user_data {
-	struct kvlist users;
-	struct avl_tree user_state;
-	struct blob_attr *wildcard;
-};
-
-struct radius_state {
-	struct radius_server_data *radius;
-	struct eap_config eap;
-
-	struct radius_user_data phase1, phase2;
-	const char *user_file;
-	time_t user_file_ts;
-
-	int n_attrs;
-	struct hostapd_radius_attr *attrs;
-};
-
-struct radius_config {
-	struct tls_connection_params tls;
-	struct radius_server_conf radius;
-};
-
-enum {
-	USER_ATTR_PASSWORD,
-	USER_ATTR_HASH,
-	USER_ATTR_SALT,
-	USER_ATTR_METHODS,
-	USER_ATTR_RADIUS,
-	USER_ATTR_VLAN,
-	USER_ATTR_MAX_RATE_UP,
-	USER_ATTR_MAX_RATE_DOWN,
-	__USER_ATTR_MAX
-};
-
-static void radius_tls_event(void *ctx, enum tls_event ev,
-			      union tls_event_data *data)
-{
-	switch (ev) {
-	case TLS_CERT_CHAIN_SUCCESS:
-		wpa_printf(MSG_DEBUG, "radius: remote certificate verification success");
-		break;
-	case TLS_CERT_CHAIN_FAILURE:
-		wpa_printf(MSG_INFO, "radius: certificate chain failure: reason=%d depth=%d subject='%s' err='%s'",
-			   data->cert_fail.reason,
-			   data->cert_fail.depth,
-			   data->cert_fail.subject,
-			   data->cert_fail.reason_txt);
-		break;
-	case TLS_PEER_CERTIFICATE:
-		wpa_printf(MSG_DEBUG, "radius: peer certificate: depth=%d serial_num=%s subject=%s",
-			   data->peer_cert.depth,
-			   data->peer_cert.serial_num ? data->peer_cert.serial_num : "N/A",
-			   data->peer_cert.subject);
-		break;
-	case TLS_ALERT:
-		if (data->alert.is_local)
-			wpa_printf(MSG_DEBUG, "radius: local TLS alert: %s",
-				   data->alert.description);
-		else
-			wpa_printf(MSG_DEBUG, "radius: remote TLS alert: %s",
-				   data->alert.description);
-		break;
-	case TLS_UNSAFE_RENEGOTIATION_DISABLED:
-		/* Not applicable to TLS server */
-		break;
-	}
-}
-
-static void radius_userdata_init(struct radius_user_data *u)
-{
-	kvlist_init(&u->users, kvlist_blob_len);
-	avl_init(&u->user_state, avl_strcmp, false, NULL);
-}
-
-static void radius_userdata_free(struct radius_user_data *u)
-{
-	struct radius_user_state *s, *tmp;
-
-	kvlist_free(&u->users);
-	free(u->wildcard);
-	u->wildcard = NULL;
-	avl_remove_all_elements(&u->user_state, s, node, tmp)
-		free(s);
-}
-
-static void
-radius_userdata_load(struct radius_user_data *u, struct blob_attr *data)
-{
-	enum {
-		USERSTATE_USERS,
-		USERSTATE_WILDCARD,
-		__USERSTATE_MAX,
-	};
-	static const struct blobmsg_policy policy[__USERSTATE_MAX] = {
-		[USERSTATE_USERS] = { "users", BLOBMSG_TYPE_TABLE },
-		[USERSTATE_WILDCARD] = { "wildcard", BLOBMSG_TYPE_ARRAY },
-	};
-	struct blob_attr *tb[__USERSTATE_MAX], *cur;
-	int rem;
-
-	if (!data)
-		return;
-
-	blobmsg_parse(policy, __USERSTATE_MAX, tb, blobmsg_data(data), blobmsg_len(data));
-
-	blobmsg_for_each_attr(cur, tb[USERSTATE_USERS], rem)
-		kvlist_set(&u->users, blobmsg_name(cur), cur);
-
-	if (tb[USERSTATE_WILDCARD])
-		u->wildcard = blob_memdup(tb[USERSTATE_WILDCARD]);
-}
-
-static void
-load_userfile(struct radius_state *s)
-{
-	enum {
-		USERDATA_PHASE1,
-		USERDATA_PHASE2,
-		__USERDATA_MAX
-	};
-	static const struct blobmsg_policy policy[__USERDATA_MAX] = {
-		[USERDATA_PHASE1] = { "phase1", BLOBMSG_TYPE_TABLE },
-		[USERDATA_PHASE2] = { "phase2", BLOBMSG_TYPE_TABLE },
-	};
-	struct blob_attr *tb[__USERDATA_MAX], *cur;
-	static struct blob_buf b;
-	struct stat st;
-	int rem;
-
-	if (stat(s->user_file, &st))
-		return;
-
-	if (s->user_file_ts == st.st_mtime)
-		return;
-
-	s->user_file_ts = st.st_mtime;
-	radius_userdata_free(&s->phase1);
-	radius_userdata_free(&s->phase2);
-
-	blob_buf_init(&b, 0);
-	blobmsg_add_json_from_file(&b, s->user_file);
-	blobmsg_parse(policy, __USERDATA_MAX, tb, blob_data(b.head), blob_len(b.head));
-	radius_userdata_load(&s->phase1, tb[USERDATA_PHASE1]);
-	radius_userdata_load(&s->phase2, tb[USERDATA_PHASE2]);
-
-	blob_buf_free(&b);
-}
-
-static struct blob_attr *
-radius_user_get(struct radius_user_data *s, const char *name)
-{
-	struct blob_attr *cur;
-	int rem;
-
-	cur = kvlist_get(&s->users, name);
-	if (cur)
-		return cur;
-
-	blobmsg_for_each_attr(cur, s->wildcard, rem) {
-		static const struct blobmsg_policy policy = {
-			"name", BLOBMSG_TYPE_STRING
-		};
-		struct blob_attr *pattern;
-
-		if (blobmsg_type(cur) != BLOBMSG_TYPE_TABLE)
-			continue;
-
-		blobmsg_parse(&policy, 1, &pattern, blobmsg_data(cur), blobmsg_len(cur));
-		if (!name)
-			continue;
-
-		if (!fnmatch(blobmsg_get_string(pattern), name, 0))
-			return cur;
-	}
-
-	return NULL;
-}
-
-static struct radius_parse_attr_data *
-radius_parse_attr(struct blob_attr *attr)
-{
-	static const struct blobmsg_policy policy[4] = {
-		{ .type = BLOBMSG_TYPE_INT32 },
-		{ .type = BLOBMSG_TYPE_INT32 },
-		{ .type = BLOBMSG_TYPE_STRING },
-		{ .type = BLOBMSG_TYPE_STRING },
-	};
-	static struct radius_parse_attr_data data;
-	struct blob_attr *tb[4];
-	const char *format;
-
-	blobmsg_parse_array(policy, ARRAY_SIZE(policy), tb, blobmsg_data(attr), blobmsg_len(attr));
-
-	if (!tb[0] || !tb[1] || !tb[2] || !tb[3])
-		return NULL;
-
-	format = blobmsg_get_string(tb[2]);
-	if (strlen(format) != 1)
-		return NULL;
-
-	data.vendor = blobmsg_get_u32(tb[0]);
-	data.type = blobmsg_get_u32(tb[1]);
-	data.format = format[0];
-	data.data = blobmsg_get_string(tb[3]);
-	data.size = strlen(data.data);
-
-	switch (data.format) {
-	case 's':
-		break;
-	case 'x':
-		if (data.size & 1)
-			return NULL;
-		data.size /= 2;
-		break;
-	case 'd':
-		data.size = 4;
-		break;
-	default:
-		return NULL;
-	}
-
-	return &data;
-}
-
-static void
-radius_count_attrs(struct blob_attr **tb, int *n_attr, size_t *attr_size)
-{
-	struct blob_attr *data = tb[USER_ATTR_RADIUS];
-	struct blob_attr *cur;
-	int rem;
-
-	blobmsg_for_each_attr(cur, data, rem) {
-		struct radius_parse_attr_data *data;
-		size_t prev = *attr_size;
-
-		data = radius_parse_attr(cur);
-		if (!data)
-			continue;
-
-		*attr_size += data->size;
-		if (data->vendor)
-			*attr_size += VENDOR_ATTR_SIZE;
-
-		(*n_attr)++;
-	}
-
-	*n_attr += !!tb[USER_ATTR_VLAN] * 3 +
-		   !!tb[USER_ATTR_MAX_RATE_UP] +
-		   !!tb[USER_ATTR_MAX_RATE_DOWN];
-	*attr_size += !!tb[USER_ATTR_VLAN] * (4 + 4 + 5) +
-		      !!tb[USER_ATTR_MAX_RATE_UP] * (4 + VENDOR_ATTR_SIZE) +
-		      !!tb[USER_ATTR_MAX_RATE_DOWN] * (4 + VENDOR_ATTR_SIZE);
-}
-
-static void *
-radius_add_attr(struct radius_parse_attr_state *state,
-		u32 vendor, u8 type, u8 len)
-{
-	struct hostapd_radius_attr *attr;
-	struct wpabuf *buf;
-	void *val;
-
-	val = state->attrdata;
-
-	buf = state->buf++;
-	buf->buf = val;
-
-	attr = state->attr++;
-	attr->val = buf;
-	attr->type = type;
-
-	if (state->prev)
-		state->prev->next = attr;
-	state->prev = attr;
-
-	if (vendor) {
-		u8 *vendor_hdr = val + 4;
-
-		WPA_PUT_BE32(val, vendor);
-		vendor_hdr[0] = type;
-		vendor_hdr[1] = len + 2;
-
-		len += VENDOR_ATTR_SIZE;
-		val += VENDOR_ATTR_SIZE;
-		attr->type = RADIUS_ATTR_VENDOR_SPECIFIC;
-	}
-
-	buf->size = buf->used = len;
-	state->attrdata += len;
-
-	return val;
-}
-
-static void
-radius_parse_attrs(struct blob_attr **tb, struct radius_parse_attr_state *state)
-{
-	struct blob_attr *data = tb[USER_ATTR_RADIUS];
-	struct hostapd_radius_attr *prev = NULL;
-	struct blob_attr *cur;
-	int len, rem;
-	void *val;
-
-	if ((cur = tb[USER_ATTR_VLAN]) != NULL && blobmsg_get_u32(cur) < 4096) {
-		char buf[5];
-
-		val = radius_add_attr(state, 0, RADIUS_ATTR_TUNNEL_TYPE, 4);
-		WPA_PUT_BE32(val, RADIUS_TUNNEL_TYPE_VLAN);
-
-		val = radius_add_attr(state, 0, RADIUS_ATTR_TUNNEL_MEDIUM_TYPE, 4);
-		WPA_PUT_BE32(val, RADIUS_TUNNEL_MEDIUM_TYPE_802);
-
-		len = snprintf(buf, sizeof(buf), "%d", blobmsg_get_u32(cur));
-		val = radius_add_attr(state, 0, RADIUS_ATTR_TUNNEL_PRIVATE_GROUP_ID, len);
-		memcpy(val, buf, len);
-	}
-
-	if ((cur = tb[USER_ATTR_MAX_RATE_UP]) != NULL) {
-		val = radius_add_attr(state, VENDOR_ID_WISPR, 7, 4);
-		WPA_PUT_BE32(val, blobmsg_get_u32(cur));
-	}
-
-	if ((cur = tb[USER_ATTR_MAX_RATE_DOWN]) != NULL) {
-		val = radius_add_attr(state, VENDOR_ID_WISPR, 8, 4);
-		WPA_PUT_BE32(val, blobmsg_get_u32(cur));
-	}
-
-	blobmsg_for_each_attr(cur, data, rem) {
-		struct radius_parse_attr_data *data;
-		void *val;
-		int size;
-
-		data = radius_parse_attr(cur);
-		if (!data)
-			continue;
-
-		val = radius_add_attr(state, data->vendor, data->type, data->size);
-		switch (data->format) {
-		case 's':
-			memcpy(val, data->data, data->size);
-			break;
-		case 'x':
-			hexstr2bin(data->data, val, data->size);
-			break;
-		case 'd':
-			WPA_PUT_BE32(val, atoi(data->data));
-			break;
-		}
-	}
-}
-
-static void
-radius_user_parse_methods(struct eap_user *eap, struct blob_attr *data)
-{
-	struct blob_attr *cur;
-	int rem, n = 0;
-
-	if (!data)
-		return;
-
-	blobmsg_for_each_attr(cur, data, rem) {
-		const char *method;
-
-		if (blobmsg_type(cur) != BLOBMSG_TYPE_STRING)
-			continue;
-
-		if (n == EAP_MAX_METHODS)
-			break;
-
-		method = blobmsg_get_string(cur);
-		eap->methods[n].method = eap_server_get_type(method, &eap->methods[n].vendor);
-		if (eap->methods[n].vendor == EAP_VENDOR_IETF &&
-		    eap->methods[n].method == EAP_TYPE_NONE) {
-			if (!strcmp(method, "TTLS-PAP")) {
-				eap->ttls_auth |= EAP_TTLS_AUTH_PAP;
-				continue;
-			}
-			if (!strcmp(method, "TTLS-CHAP")) {
-				eap->ttls_auth |= EAP_TTLS_AUTH_CHAP;
-				continue;
-			}
-			if (!strcmp(method, "TTLS-MSCHAP")) {
-				eap->ttls_auth |= EAP_TTLS_AUTH_MSCHAP;
-				continue;
-			}
-			if (!strcmp(method, "TTLS-MSCHAPV2")) {
-				eap->ttls_auth |= EAP_TTLS_AUTH_MSCHAPV2;
-				continue;
-			}
-			if (!strcmp(method, "MACACL")) {
-				eap->macacl = 1;
-				continue;
-			}
-		}
-		n++;
-	}
-}
-
-static struct eap_user *
-radius_user_get_state(struct radius_user_data *u, struct blob_attr *data,
-		      const char *id)
-{
-	static const struct blobmsg_policy policy[__USER_ATTR_MAX] = {
-		[USER_ATTR_PASSWORD] = { "password", BLOBMSG_TYPE_STRING },
-		[USER_ATTR_HASH] = { "hash", BLOBMSG_TYPE_STRING },
-		[USER_ATTR_SALT] = { "salt", BLOBMSG_TYPE_STRING },
-		[USER_ATTR_METHODS] = { "methods", BLOBMSG_TYPE_ARRAY },
-		[USER_ATTR_RADIUS] = { "radius", BLOBMSG_TYPE_ARRAY },
-		[USER_ATTR_VLAN] = { "vlan-id", BLOBMSG_TYPE_INT32 },
-		[USER_ATTR_MAX_RATE_UP] = { "max-rate-up", BLOBMSG_TYPE_INT32 },
-		[USER_ATTR_MAX_RATE_DOWN] = { "max-rate-down", BLOBMSG_TYPE_INT32 },
-	};
-	struct blob_attr *tb[__USER_ATTR_MAX], *cur;
-	char *password_buf, *salt_buf, *name_buf;
-	struct radius_parse_attr_state astate = {};
-	struct hostapd_radius_attr *attr;
-	struct radius_user_state *state;
-	int pw_len = 0, salt_len = 0;
-	struct eap_user *eap;
-	struct wpabuf *val;
-	size_t attrsize = 0;
-	void *attrdata;
-	int n_attr = 0;
-
-	state = avl_find_element(&u->user_state, id, state, node);
-	if (state)
-		return &state->data;
-
-	blobmsg_parse(policy, __USER_ATTR_MAX, tb, blobmsg_data(data), blobmsg_len(data));
-
-	if ((cur = tb[USER_ATTR_SALT]) != NULL)
-		salt_len = strlen(blobmsg_get_string(cur)) / 2;
-	if ((cur = tb[USER_ATTR_HASH]) != NULL)
-		pw_len = strlen(blobmsg_get_string(cur)) / 2;
-	else if ((cur = tb[USER_ATTR_PASSWORD]) != NULL)
-		pw_len = blobmsg_len(cur) - 1;
-	radius_count_attrs(tb, &n_attr, &attrsize);
-
-	state = calloc_a(sizeof(*state), &name_buf, strlen(id) + 1,
-			 &password_buf, pw_len,
-			 &salt_buf, salt_len,
-			 &astate.attr, n_attr * sizeof(*astate.attr),
-			 &astate.buf, n_attr * sizeof(*astate.buf),
-			 &astate.attrdata, attrsize);
-	eap = &state->data;
-	eap->salt = salt_len ? salt_buf : NULL;
-	eap->salt_len = salt_len;
-	eap->password = pw_len ? password_buf : NULL;
-	eap->password_len = pw_len;
-	eap->force_version = -1;
-
-	if ((cur = tb[USER_ATTR_SALT]) != NULL)
-		hexstr2bin(blobmsg_get_string(cur), salt_buf, salt_len);
-	if ((cur = tb[USER_ATTR_PASSWORD]) != NULL)
-		memcpy(password_buf, blobmsg_get_string(cur), pw_len);
-	else if ((cur = tb[USER_ATTR_HASH]) != NULL) {
-		hexstr2bin(blobmsg_get_string(cur), password_buf, pw_len);
-		eap->password_hash = 1;
-	}
-	radius_user_parse_methods(eap, tb[USER_ATTR_METHODS]);
-
-	if (n_attr > 0) {
-		cur = tb[USER_ATTR_RADIUS];
-		eap->accept_attr = astate.attr;
-		radius_parse_attrs(tb, &astate);
-	}
-
-	state->node.key = strcpy(name_buf, id);
-	avl_insert(&u->user_state, &state->node);
-
-	return &state->data;
-
-free:
-	free(state);
-	return NULL;
-}
-
-static int radius_get_eap_user(void *ctx, const u8 *identity,
-			       size_t identity_len, int phase2,
-			       struct eap_user *user)
-{
-	struct radius_state *s = ctx;
-	struct radius_user_data *u = phase2 ? &s->phase2 : &s->phase1;
-	struct blob_attr *entry;
-	struct eap_user *data;
-	char *id;
-
-	if (identity_len > 512)
-		return -1;
-
-	load_userfile(s);
-
-	id = alloca(identity_len + 1);
-	memcpy(id, identity, identity_len);
-	id[identity_len] = 0;
-
-	entry = radius_user_get(u, id);
-	if (!entry)
-		return -1;
-
-	if (!user)
-		return 0;
-
-	data = radius_user_get_state(u, entry, id);
-	if (!data)
-		return -1;
-
-	*user = *data;
-	if (user->password_len > 0)
-		user->password = os_memdup(user->password, user->password_len);
-	if (user->salt_len > 0)
-		user->salt = os_memdup(user->salt, user->salt_len);
-	user->phase2 = phase2;
-
-	return 0;
-}
-
-static int radius_setup(struct radius_state *s, struct radius_config *c)
-{
-	struct eap_config *eap = &s->eap;
-	struct tls_config conf = {
-		.event_cb = radius_tls_event,
-		.tls_flags = TLS_CONN_DISABLE_TLSv1_3,
-		.cb_ctx = s,
-	};
-
-	eap->eap_server = 1;
-	eap->max_auth_rounds = 100;
-	eap->max_auth_rounds_short = 50;
-	eap->ssl_ctx = tls_init(&conf);
-	if (!eap->ssl_ctx) {
-		wpa_printf(MSG_INFO, "TLS init failed\n");
-		return 1;
-	}
-
-	if (tls_global_set_params(eap->ssl_ctx, &c->tls)) {
-		wpa_printf(MSG_INFO, "failed to set TLS parameters\n");
-		return 1;
-	}
-
-	c->radius.eap_cfg = eap;
-	c->radius.conf_ctx = s;
-	c->radius.get_eap_user = radius_get_eap_user;
-	s->radius = radius_server_init(&c->radius);
-	if (!s->radius) {
-		wpa_printf(MSG_INFO, "failed to initialize radius server\n");
-		return 1;
-	}
-
-	return 0;
-}
-
-static int radius_init(struct radius_state *s)
-{
-	memset(s, 0, sizeof(*s));
-	radius_userdata_init(&s->phase1);
-	radius_userdata_init(&s->phase2);
-}
-
-static void radius_deinit(struct radius_state *s)
-{
-	if (s->radius)
-		radius_server_deinit(s->radius);
-
-	if (s->eap.ssl_ctx)
-		tls_deinit(s->eap.ssl_ctx);
-
-	radius_userdata_free(&s->phase1);
-	radius_userdata_free(&s->phase2);
-}
-
-static int usage(const char *progname)
-{
-	fprintf(stderr, "Usage: %s <options>\n",
-		progname);
-}
-
-int radius_main(int argc, char **argv)
-{
-	static struct radius_state state = {};
-	static struct radius_config config = {};
-	const char *progname = argv[0];
-	int ret = 0;
-	int ch;
-
-	wpa_debug_setup_stdout();
-	wpa_debug_level = 0;
-
-	if (eloop_init()) {
-		wpa_printf(MSG_ERROR, "Failed to initialize event loop");
-		return 1;
-	}
-
-	eap_server_register_methods();
-	radius_init(&state);
-
-	while ((ch = getopt(argc, argv, "6C:c:d:i:k:K:p:P:s:u:")) != -1) {
-		switch (ch) {
-		case '6':
-			config.radius.ipv6 = 1;
-			break;
-		case 'C':
-			config.tls.ca_cert = optarg;
-			break;
-		case 'c':
-			if (config.tls.client_cert2)
-				return usage(progname);
-
-			if (config.tls.client_cert)
-				config.tls.client_cert2 = optarg;
-			else
-				config.tls.client_cert = optarg;
-			break;
-		case 'd':
-			config.tls.dh_file = optarg;
-			break;
-		case 'i':
-			state.eap.server_id = optarg;
-			state.eap.server_id_len = strlen(optarg);
-			break;
-		case 'k':
-			if (config.tls.private_key2)
-				return usage(progname);
-
-			if (config.tls.private_key)
-				config.tls.private_key2 = optarg;
-			else
-				config.tls.private_key = optarg;
-			break;
-		case 'K':
-			if (config.tls.private_key_passwd2)
-				return usage(progname);
-
-			if (config.tls.private_key_passwd)
-				config.tls.private_key_passwd2 = optarg;
-			else
-				config.tls.private_key_passwd = optarg;
-			break;
-		case 'p':
-			config.radius.auth_port = atoi(optarg);
-			break;
-		case 'P':
-			config.radius.acct_port = atoi(optarg);
-			break;
-		case 's':
-			config.radius.client_file = optarg;
-			break;
-		case 'u':
-			state.user_file = optarg;
-			break;
-		default:
-			return usage(progname);
-		}
-	}
-
-	if (!config.tls.client_cert || !config.tls.private_key ||
-	    !config.radius.client_file || !state.eap.server_id ||
-	    !state.user_file) {
-		wpa_printf(MSG_INFO, "missing options\n");
-		goto out;
-	}
-
-	ret = radius_setup(&state, &config);
-	if (ret)
-		goto out;
-
-	load_userfile(&state);
-	eloop_run();
-
-out:
-	radius_deinit(&state);
-	os_program_deinit();
-
-	return ret;
-}

feeds/hostapd/hostapd/src/src/ap/ucode.c

@@ -1,952 +0,0 @@
-#include <sys/un.h>
-
-#include "utils/includes.h"
-#include "utils/common.h"
-#include "utils/ucode.h"
-#include "hostapd.h"
-#include "beacon.h"
-#include "hw_features.h"
-#include "ap_drv_ops.h"
-#include "dfs.h"
-#include "acs.h"
-#include "ieee802_11_auth.h"
-#include <libubox/uloop.h>
-
-static uc_resource_type_t *global_type, *bss_type, *iface_type;
-static struct hapd_interfaces *interfaces;
-static uc_value_t *global, *bss_registry, *iface_registry;
-static uc_vm_t *vm;
-
-static uc_value_t *
-hostapd_ucode_bss_get_uval(struct hostapd_data *hapd)
-{
-	uc_value_t *val;
-
-	if (hapd->ucode.idx)
-		return wpa_ucode_registry_get(bss_registry, hapd->ucode.idx);
-
-	val = uc_resource_new(bss_type, hapd);
-	hapd->ucode.idx = wpa_ucode_registry_add(bss_registry, val);
-
-	return val;
-}
-
-static uc_value_t *
-hostapd_ucode_iface_get_uval(struct hostapd_iface *hapd)
-{
-	uc_value_t *val;
-
-	if (hapd->ucode.idx)
-		return wpa_ucode_registry_get(iface_registry, hapd->ucode.idx);
-
-	val = uc_resource_new(iface_type, hapd);
-	hapd->ucode.idx = wpa_ucode_registry_add(iface_registry, val);
-
-	return val;
-}
-
-static void
-hostapd_ucode_update_bss_list(struct hostapd_iface *iface, uc_value_t *if_bss, uc_value_t *bss)
-{
-	uc_value_t *list;
-	int i;
-
-	list = ucv_array_new(vm);
-	for (i = 0; iface->bss && i < iface->num_bss; i++) {
-		struct hostapd_data *hapd = iface->bss[i];
-		uc_value_t *val = hostapd_ucode_bss_get_uval(hapd);
-
-		ucv_array_set(list, i, ucv_get(ucv_string_new(hapd->conf->iface)));
-		ucv_object_add(bss, hapd->conf->iface, ucv_get(val));
-	}
-	ucv_object_add(if_bss, iface->phy, ucv_get(list));
-}
-
-static void
-hostapd_ucode_update_interfaces(void)
-{
-	uc_value_t *ifs = ucv_object_new(vm);
-	uc_value_t *if_bss = ucv_array_new(vm);
-	uc_value_t *bss = ucv_object_new(vm);
-	int i;
-
-	for (i = 0; i < interfaces->count; i++) {
-		struct hostapd_iface *iface = interfaces->iface[i];
-
-		ucv_object_add(ifs, iface->phy, ucv_get(hostapd_ucode_iface_get_uval(iface)));
-		hostapd_ucode_update_bss_list(iface, if_bss, bss);
-	}
-
-	ucv_object_add(ucv_prototype_get(global), "interfaces", ucv_get(ifs));
-	ucv_object_add(ucv_prototype_get(global), "interface_bss", ucv_get(if_bss));
-	ucv_object_add(ucv_prototype_get(global), "bss", ucv_get(bss));
-	ucv_gc(vm);
-}
-
-static uc_value_t *
-uc_hostapd_add_iface(uc_vm_t *vm, size_t nargs)
-{
-	uc_value_t *iface = uc_fn_arg(0);
-	int ret;
-
-	if (ucv_type(iface) != UC_STRING)
-		return ucv_int64_new(-1);
-
-	ret = hostapd_add_iface(interfaces, ucv_string_get(iface));
-	hostapd_ucode_update_interfaces();
-
-	return ucv_int64_new(ret);
-}
-
-static uc_value_t *
-uc_hostapd_remove_iface(uc_vm_t *vm, size_t nargs)
-{
-	uc_value_t *iface = uc_fn_arg(0);
-
-	if (ucv_type(iface) != UC_STRING)
-		return NULL;
-
-	hostapd_remove_iface(interfaces, ucv_string_get(iface));
-	hostapd_ucode_update_interfaces();
-
-	return NULL;
-}
-
-static struct hostapd_vlan *
-bss_conf_find_vlan(struct hostapd_bss_config *bss, int id)
-{
-	struct hostapd_vlan *vlan;
-
-	for (vlan = bss->vlan; vlan; vlan = vlan->next)
-		if (vlan->vlan_id == id)
-			return vlan;
-
-	return NULL;
-}
-
-static int
-bss_conf_rename_vlan(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
-		     const char *ifname)
-{
-	if (!strcmp(ifname, vlan->ifname))
-		return 0;
-
-	hostapd_drv_if_rename(hapd, WPA_IF_AP_VLAN, vlan->ifname, ifname);
-	os_strlcpy(vlan->ifname, ifname, sizeof(vlan->ifname));
-
-	return 0;
-}
-
-static int
-bss_reload_vlans(struct hostapd_data *hapd, struct hostapd_bss_config *bss)
-{
-	struct hostapd_bss_config *old_bss = hapd->conf;
-	struct hostapd_vlan *vlan, *vlan_new, *wildcard;
-	char ifname[IFNAMSIZ + 1], vlan_ifname[IFNAMSIZ + 1], *pos;
-	int ret;
-
-	vlan = bss_conf_find_vlan(old_bss, VLAN_ID_WILDCARD);
-	wildcard = bss_conf_find_vlan(bss, VLAN_ID_WILDCARD);
-	if (!!vlan != !!wildcard)
-		return -1;
-
-	if (vlan && wildcard && strcmp(vlan->ifname, wildcard->ifname) != 0)
-		strcpy(vlan->ifname, wildcard->ifname);
-	else
-		wildcard = NULL;
-
-	for (vlan = bss->vlan; vlan; vlan = vlan->next) {
-		if (vlan->vlan_id == VLAN_ID_WILDCARD ||
-		    vlan->dynamic_vlan > 0)
-			continue;
-
-		if (!bss_conf_find_vlan(old_bss, vlan->vlan_id))
-			return -1;
-	}
-
-	for (vlan = old_bss->vlan; vlan; vlan = vlan->next) {
-		if (vlan->vlan_id == VLAN_ID_WILDCARD)
-			continue;
-
-		if (vlan->dynamic_vlan == 0) {
-			vlan_new = bss_conf_find_vlan(bss, vlan->vlan_id);
-			if (!vlan_new)
-				return -1;
-
-			if (bss_conf_rename_vlan(hapd, vlan, vlan_new->ifname))
-				return -1;
-
-			continue;
-		}
-
-		if (!wildcard)
-			continue;
-
-		os_strlcpy(ifname, wildcard->ifname, sizeof(ifname));
-		pos = os_strchr(ifname, '#');
-		if (!pos)
-			return -1;
-
-		*pos++ = '\0';
-		ret = os_snprintf(vlan_ifname, sizeof(vlan_ifname), "%s%d%s",
-				  ifname, vlan->vlan_id, pos);
-	        if (os_snprintf_error(sizeof(vlan_ifname), ret))
-			return -1;
-
-		if (bss_conf_rename_vlan(hapd, vlan, vlan_ifname))
-			return -1;
-	}
-
-	return 0;
-}
-
-static uc_value_t *
-uc_hostapd_bss_set_config(uc_vm_t *vm, size_t nargs)
-{
-	struct hostapd_data *hapd = uc_fn_thisval("hostapd.bss");
-	struct hostapd_bss_config *old_bss;
-	struct hostapd_iface *iface;
-	struct hostapd_config *conf;
-	uc_value_t *file = uc_fn_arg(0);
-	uc_value_t *index = uc_fn_arg(1);
-	uc_value_t *files_only = uc_fn_arg(2);
-	unsigned int i, idx = 0;
-	int ret = -1;
-
-	if (!hapd || ucv_type(file) != UC_STRING)
-		goto out;
-
-	if (ucv_type(index) == UC_INTEGER)
-		idx = ucv_int64_get(index);
-
-	iface = hapd->iface;
-	conf = interfaces->config_read_cb(ucv_string_get(file));
-	if (!conf)
-		goto out;
-
-	if (idx > conf->num_bss || !conf->bss[idx])
-		goto free;
-
-	if (ucv_boolean_get(files_only)) {
-		struct hostapd_bss_config *bss = conf->bss[idx];
-		struct hostapd_bss_config *old_bss = hapd->conf;
-
-#define swap_field(name)				\
-	do {								\
-		void *ptr = old_bss->name;		\
-		old_bss->name = bss->name;		\
-		bss->name = ptr;				\
-	} while (0)
-
-		swap_field(ssid.wpa_psk_file);
-		ret = bss_reload_vlans(hapd, bss);
-		goto done;
-	}
-
-	hostapd_bss_deinit_no_free(hapd);
-	hostapd_drv_stop_ap(hapd);
-	hostapd_free_hapd_data(hapd);
-
-	old_bss = hapd->conf;
-	for (i = 0; i < iface->conf->num_bss; i++)
-		if (iface->conf->bss[i] == hapd->conf)
-			iface->conf->bss[i] = conf->bss[idx];
-	hapd->conf = conf->bss[idx];
-	conf->bss[idx] = old_bss;
-
-	hostapd_setup_bss(hapd, hapd == iface->bss[0], true);
-	hostapd_ucode_update_interfaces();
-	hostapd_owe_update_trans(iface);
-
-done:
-	ret = 0;
-free:
-	hostapd_config_free(conf);
-out:
-	return ucv_int64_new(ret);
-}
-
-static void
-hostapd_remove_iface_bss_conf(struct hostapd_config *iconf,
-			      struct hostapd_bss_config *conf)
-{
-	int i;
-
-	for (i = 0; i < iconf->num_bss; i++)
-		if (iconf->bss[i] == conf)
-			break;
-
-	if (i == iconf->num_bss)
-		return;
-
-	for (i++; i < iconf->num_bss; i++)
-		iconf->bss[i - 1] = iconf->bss[i];
-	iconf->num_bss--;
-}
-
-
-static uc_value_t *
-uc_hostapd_bss_delete(uc_vm_t *vm, size_t nargs)
-{
-	struct hostapd_data *hapd = uc_fn_thisval("hostapd.bss");
-	struct hostapd_iface *iface;
-	int i, idx;
-
-	if (!hapd)
-		return NULL;
-
-	iface = hapd->iface;
-	if (iface->num_bss == 1) {
-		wpa_printf(MSG_ERROR, "trying to delete last bss of an iface: %s\n", hapd->conf->iface);
-		return NULL;
-	}
-
-	for (idx = 0; idx < iface->num_bss; idx++)
-		if (iface->bss[idx] == hapd)
-			break;
-
-	if (idx == iface->num_bss)
-		return NULL;
-
-	for (i = idx + 1; i < iface->num_bss; i++)
-		iface->bss[i - 1] = iface->bss[i];
-
-	iface->num_bss--;
-
-	iface->bss[0]->interface_added = 0;
-	hostapd_drv_set_first_bss(iface->bss[0]);
-	hapd->interface_added = 1;
-
-	hostapd_drv_stop_ap(hapd);
-	hostapd_bss_deinit(hapd);
-	hostapd_remove_iface_bss_conf(iface->conf, hapd->conf);
-	hostapd_config_free_bss(hapd->conf);
-	os_free(hapd);
-
-	hostapd_ucode_update_interfaces();
-	ucv_gc(vm);
-
-	return NULL;
-}
-
-static uc_value_t *
-uc_hostapd_iface_add_bss(uc_vm_t *vm, size_t nargs)
-{
-	struct hostapd_iface *iface = uc_fn_thisval("hostapd.iface");
-	struct hostapd_bss_config *bss;
-	struct hostapd_config *conf;
-	struct hostapd_data *hapd;
-	uc_value_t *file = uc_fn_arg(0);
-	uc_value_t *index = uc_fn_arg(1);
-	unsigned int idx = 0;
-	uc_value_t *ret = NULL;
-
-	if (!iface || ucv_type(file) != UC_STRING)
-		goto out;
-
-	if (ucv_type(index) == UC_INTEGER)
-		idx = ucv_int64_get(index);
-
-	conf = interfaces->config_read_cb(ucv_string_get(file));
-	if (!conf || idx > conf->num_bss || !conf->bss[idx])
-		goto out;
-
-	bss = conf->bss[idx];
-	hapd = hostapd_alloc_bss_data(iface, iface->conf, bss);
-	if (!hapd)
-		goto out;
-
-	hapd->driver = iface->bss[0]->driver;
-	hapd->drv_priv = iface->bss[0]->drv_priv;
-	if (interfaces->ctrl_iface_init &&
-	    interfaces->ctrl_iface_init(hapd) < 0)
-		goto free_hapd;
-
-	if (iface->state == HAPD_IFACE_ENABLED &&
-	    hostapd_setup_bss(hapd, -1, true))
-		goto deinit_ctrl;
-
-	iface->bss = os_realloc_array(iface->bss, iface->num_bss + 1,
-				      sizeof(*iface->bss));
-	iface->bss[iface->num_bss++] = hapd;
-
-	iface->conf->bss = os_realloc_array(iface->conf->bss,
-					    iface->conf->num_bss + 1,
-					    sizeof(*iface->conf->bss));
-	iface->conf->bss[iface->conf->num_bss] = bss;
-	conf->bss[idx] = NULL;
-	ret = hostapd_ucode_bss_get_uval(hapd);
-	hostapd_ucode_update_interfaces();
-	hostapd_owe_update_trans(iface);
-	goto out;
-
-deinit_ctrl:
-	if (interfaces->ctrl_iface_deinit)
-		interfaces->ctrl_iface_deinit(hapd);
-free_hapd:
-	hostapd_free_hapd_data(hapd);
-	os_free(hapd);
-out:
-	hostapd_config_free(conf);
-	return ret;
-}
-
-static uc_value_t *
-uc_hostapd_iface_set_bss_order(uc_vm_t *vm, size_t nargs)
-{
-	struct hostapd_iface *iface = uc_fn_thisval("hostapd.iface");
-	uc_value_t *bss_list = uc_fn_arg(0);
-	struct hostapd_data **new_bss;
-	struct hostapd_bss_config **new_conf;
-
-	if (!iface)
-		return NULL;
-
-	if (ucv_type(bss_list) != UC_ARRAY ||
-	    ucv_array_length(bss_list) != iface->num_bss)
-		return NULL;
-
-	new_bss = calloc(iface->num_bss, sizeof(*new_bss));
-	new_conf = calloc(iface->num_bss, sizeof(*new_conf));
-	for (size_t i = 0; i < iface->num_bss; i++) {
-		struct hostapd_data *bss;
-
-		bss = ucv_resource_data(ucv_array_get(bss_list, i), "hostapd.bss");
-		if (bss->iface != iface)
-			goto free;
-
-		for (size_t k = 0; k < i; k++)
-			if (new_bss[k] == bss)
-				goto free;
-
-		new_bss[i] = bss;
-		new_conf[i] = bss->conf;
-	}
-
-	new_bss[0]->interface_added = 0;
-	for (size_t i = 1; i < iface->num_bss; i++)
-		new_bss[i]->interface_added = 1;
-
-	free(iface->bss);
-	iface->bss = new_bss;
-
-	free(iface->conf->bss);
-	iface->conf->bss = new_conf;
-	iface->conf->num_bss = iface->num_bss;
-	hostapd_drv_set_first_bss(iface->bss[0]);
-
-	return ucv_boolean_new(true);
-
-free:
-	free(new_bss);
-	free(new_conf);
-	return NULL;
-}
-
-static uc_value_t *
-uc_hostapd_bss_ctrl(uc_vm_t *vm, size_t nargs)
-{
-	struct hostapd_data *hapd = uc_fn_thisval("hostapd.bss");
-	uc_value_t *arg = uc_fn_arg(0);
-	struct sockaddr_storage from = {};
-	static char reply[4096];
-	int reply_len;
-
-	if (!hapd || !interfaces->ctrl_iface_recv ||
-	    ucv_type(arg) != UC_STRING)
-		return NULL;
-
-	reply_len = interfaces->ctrl_iface_recv(hapd, ucv_string_get(arg),
-						reply, sizeof(reply),
-						&from, sizeof(from));
-	if (reply_len < 0)
-		return NULL;
-
-	if (reply_len && reply[reply_len - 1] == '\n')
-		reply_len--;
-
-	return ucv_string_new_length(reply, reply_len);
-}
-
-static void
-uc_hostapd_disable_iface(struct hostapd_iface *iface)
-{
-	switch (iface->state) {
-	case HAPD_IFACE_DISABLED:
-		break;
-#ifdef CONFIG_ACS
-	case HAPD_IFACE_ACS:
-		acs_cleanup(iface);
-		iface->scan_cb = NULL;
-		/* fallthrough */
-#endif
-	default:
-		hostapd_disable_iface(iface);
-		break;
-	}
-}
-
-static uc_value_t *
-uc_hostapd_iface_stop(uc_vm_t *vm, size_t nargs)
-{
-	struct hostapd_iface *iface = uc_fn_thisval("hostapd.iface");
-	int i;
-
-	if (!iface)
-		return NULL;
-
-	if (iface->state != HAPD_IFACE_ENABLED)
-		uc_hostapd_disable_iface(iface);
-
-	for (i = 0; i < iface->num_bss; i++) {
-		struct hostapd_data *hapd = iface->bss[i];
-
-		hostapd_drv_stop_ap(hapd);
-		hapd->beacon_set_done = 0;
-	}
-
-	return NULL;
-}
-
-static uc_value_t *
-uc_hostapd_iface_start(uc_vm_t *vm, size_t nargs)
-{
-	struct hostapd_iface *iface = uc_fn_thisval("hostapd.iface");
-	uc_value_t *info = uc_fn_arg(0);
-	struct hostapd_config *conf;
-	bool changed = false;
-	uint64_t intval;
-	int i;
-
-	if (!iface)
-		return NULL;
-
-	if (!info) {
-		iface->freq = 0;
-		goto out;
-	}
-
-	if (ucv_type(info) != UC_OBJECT)
-		return NULL;
-
-#define UPDATE_VAL(field, name)							\
-	if ((intval = ucv_int64_get(ucv_object_get(info, name, NULL))) &&	\
-		!errno && intval != conf->field) do {				\
-		conf->field = intval;						\
-		changed = true;							\
-	} while(0)
-
-	conf = iface->conf;
-	UPDATE_VAL(op_class, "op_class");
-	UPDATE_VAL(hw_mode, "hw_mode");
-	UPDATE_VAL(channel, "channel");
-	UPDATE_VAL(secondary_channel, "sec_channel");
-	if (!changed &&
-	    (iface->bss[0]->beacon_set_done ||
-	     iface->state == HAPD_IFACE_DFS))
-		return ucv_boolean_new(true);
-
-	intval = ucv_int64_get(ucv_object_get(info, "center_seg0_idx", NULL));
-	if (!errno)
-		hostapd_set_oper_centr_freq_seg0_idx(conf, intval);
-
-	intval = ucv_int64_get(ucv_object_get(info, "center_seg1_idx", NULL));
-	if (!errno)
-		hostapd_set_oper_centr_freq_seg1_idx(conf, intval);
-
-	intval = ucv_int64_get(ucv_object_get(info, "oper_chwidth", NULL));
-	if (!errno)
-		hostapd_set_oper_chwidth(conf, intval);
-
-	intval = ucv_int64_get(ucv_object_get(info, "frequency", NULL));
-	if (!errno)
-		iface->freq = intval;
-	else
-		iface->freq = 0;
-	conf->acs = 0;
-
-out:
-	switch (iface->state) {
-	case HAPD_IFACE_ENABLED:
-		if (!hostapd_is_dfs_required(iface) ||
-			hostapd_is_dfs_chan_available(iface))
-			break;
-		wpa_printf(MSG_INFO, "DFS CAC required on new channel, restart interface");
-		/* fallthrough */
-	default:
-		uc_hostapd_disable_iface(iface);
-		break;
-	}
-
-	if (conf->channel && !iface->freq)
-		iface->freq = hostapd_hw_get_freq(iface->bss[0], conf->channel);
-
-	if (iface->state != HAPD_IFACE_ENABLED) {
-		hostapd_enable_iface(iface);
-		return ucv_boolean_new(true);
-	}
-
-	for (i = 0; i < iface->num_bss; i++) {
-		struct hostapd_data *hapd = iface->bss[i];
-		int ret;
-
-		hapd->conf->start_disabled = 0;
-		hostapd_set_freq(hapd, conf->hw_mode, iface->freq,
-				 conf->channel,
-				 conf->enable_edmg,
-				 conf->edmg_channel,
-				 conf->ieee80211n,
-				 conf->ieee80211ac,
-				 conf->ieee80211ax,
-				 conf->ieee80211be,
-				 conf->secondary_channel,
-				 hostapd_get_oper_chwidth(conf),
-				 hostapd_get_oper_centr_freq_seg0_idx(conf),
-				 hostapd_get_oper_centr_freq_seg1_idx(conf));
-
-		ieee802_11_set_beacon(hapd);
-	}
-	hostapd_owe_update_trans(iface);
-
-	return ucv_boolean_new(true);
-}
-
-static uc_value_t *
-uc_hostapd_iface_switch_channel(uc_vm_t *vm, size_t nargs)
-{
-	struct hostapd_iface *iface = uc_fn_thisval("hostapd.iface");
-	uc_value_t *info = uc_fn_arg(0);
-	struct hostapd_config *conf;
-	struct csa_settings csa = {};
-	uint64_t intval;
-	int i, ret = 0;
-
-	if (!iface || ucv_type(info) != UC_OBJECT)
-		return NULL;
-
-	conf = iface->conf;
-	if ((intval = ucv_int64_get(ucv_object_get(info, "csa_count", NULL))) && !errno)
-		csa.cs_count = intval;
-	if ((intval = ucv_int64_get(ucv_object_get(info, "sec_channel", NULL))) && !errno)
-		csa.freq_params.sec_channel_offset = intval;
-
-	csa.freq_params.ht_enabled = conf->ieee80211n;
-	csa.freq_params.vht_enabled = conf->ieee80211ac;
-	csa.freq_params.he_enabled = conf->ieee80211ax;
-#ifdef CONFIG_IEEE80211BE
-	csa.freq_params.eht_enabled = conf->ieee80211be;
-#endif
-	intval = ucv_int64_get(ucv_object_get(info, "oper_chwidth", NULL));
-	if (errno)
-		intval = hostapd_get_oper_chwidth(conf);
-	if (intval)
-		csa.freq_params.bandwidth = 40 << intval;
-	else
-		csa.freq_params.bandwidth = csa.freq_params.sec_channel_offset ? 40 : 20;
-
-	if ((intval = ucv_int64_get(ucv_object_get(info, "frequency", NULL))) && !errno)
-		csa.freq_params.freq = intval;
-	if ((intval = ucv_int64_get(ucv_object_get(info, "center_freq1", NULL))) && !errno)
-		csa.freq_params.center_freq1 = intval;
-	if ((intval = ucv_int64_get(ucv_object_get(info, "center_freq2", NULL))) && !errno)
-		csa.freq_params.center_freq2 = intval;
-
-	for (i = 0; i < iface->num_bss; i++)
-		ret = hostapd_switch_channel(iface->bss[i], &csa);
-
-	return ucv_boolean_new(!ret);
-}
-
-static uc_value_t *
-uc_hostapd_bss_rename(uc_vm_t *vm, size_t nargs)
-{
-	struct hostapd_data *hapd = uc_fn_thisval("hostapd.bss");
-	uc_value_t *ifname_arg = uc_fn_arg(0);
-	char prev_ifname[IFNAMSIZ + 1];
-	struct sta_info *sta;
-	const char *ifname;
-	int ret;
-
-	if (!hapd || ucv_type(ifname_arg) != UC_STRING)
-		return NULL;
-
-	os_strlcpy(prev_ifname, hapd->conf->iface, sizeof(prev_ifname));
-	ifname = ucv_string_get(ifname_arg);
-
-	hostapd_ubus_free_bss(hapd);
-	if (interfaces->ctrl_iface_deinit)
-		interfaces->ctrl_iface_deinit(hapd);
-
-	ret = hostapd_drv_if_rename(hapd, WPA_IF_AP_BSS, NULL, ifname);
-	if (ret)
-		goto out;
-
-	for (sta = hapd->sta_list; sta; sta = sta->next) {
-		char cur_name[IFNAMSIZ + 1], new_name[IFNAMSIZ + 1];
-
-		if (!(sta->flags & WLAN_STA_WDS) || sta->pending_wds_enable)
-			continue;
-
-		snprintf(cur_name, sizeof(cur_name), "%s.sta%d", prev_ifname, sta->aid);
-		snprintf(new_name, sizeof(new_name), "%s.sta%d", ifname, sta->aid);
-		hostapd_drv_if_rename(hapd, WPA_IF_AP_VLAN, cur_name, new_name);
-	}
-
-	if (!strncmp(hapd->conf->ssid.vlan, hapd->conf->iface, sizeof(hapd->conf->ssid.vlan)))
-		os_strlcpy(hapd->conf->ssid.vlan, ifname, sizeof(hapd->conf->ssid.vlan));
-	os_strlcpy(hapd->conf->iface, ifname, sizeof(hapd->conf->iface));
-	hostapd_ubus_add_bss(hapd);
-
-	hostapd_ucode_update_interfaces();
-	hostapd_owe_update_trans(hapd->iface);
-out:
-	if (interfaces->ctrl_iface_init)
-		interfaces->ctrl_iface_init(hapd);
-
-	return ret ? NULL : ucv_boolean_new(true);
-}
-
-int hostapd_ucode_sta_auth(struct hostapd_data *hapd, struct sta_info *sta)
-{
-	char addr[sizeof(MACSTR)];
-	uc_value_t *val, *cur;
-	int ret = 0;
-
-	if (wpa_ucode_call_prepare("sta_auth"))
-		return 0;
-
-	uc_value_push(ucv_get(ucv_string_new(hapd->conf->iface)));
-
-	snprintf(addr, sizeof(addr), MACSTR, MAC2STR(sta->addr));
-	val = ucv_string_new(addr);
-	uc_value_push(ucv_get(val));
-
-	val = wpa_ucode_call(2);
-
-	cur = ucv_object_get(val, "psk", NULL);
-	if (ucv_type(cur) == UC_ARRAY) {
-		struct hostapd_sta_wpa_psk_short *p, **next;
-		size_t len = ucv_array_length(cur);
-
-		next = &sta->psk;
-		hostapd_free_psk_list(*next);
-		*next = NULL;
-
-		for (size_t i = 0; i < len; i++) {
-			uc_value_t *cur_psk;
-			const char *str;
-			size_t str_len;
-
-			cur_psk = ucv_array_get(cur, i);
-			str = ucv_string_get(cur_psk);
-			str_len = strlen(str);
-			if (!str || str_len < 8 || str_len > 64)
-				continue;
-
-			p = os_zalloc(sizeof(*p));
-			if (len == 64) {
-				if (hexstr2bin(str, p->psk, PMK_LEN) < 0) {
-					free(p);
-					continue;
-				}
-			} else {
-				p->is_passphrase = 1;
-				memcpy(p->passphrase, str, str_len + 1);
-			}
-
-			*next = p;
-			next = &p->next;
-		}
-	}
-
-	cur = ucv_object_get(val, "force_psk", NULL);
-	sta->use_sta_psk = ucv_is_truish(cur);
-
-	cur = ucv_object_get(val, "status", NULL);
-	if (ucv_type(cur) == UC_INTEGER)
-		ret = ucv_int64_get(cur);
-
-	ucv_put(val);
-	ucv_gc(vm);
-
-	return ret;
-}
-
-void hostapd_ucode_sta_connected(struct hostapd_data *hapd, struct sta_info *sta)
-{
-	struct hostapd_sta_wpa_psk_short *psk = sta->psk;
-	char addr[sizeof(MACSTR)];
-	uc_value_t *val, *cur;
-	int ret = 0;
-
-	if (wpa_ucode_call_prepare("sta_connected"))
-		return;
-
-	uc_value_push(ucv_get(ucv_string_new(hapd->conf->iface)));
-
-	snprintf(addr, sizeof(addr), MACSTR, MAC2STR(sta->addr));
-	val = ucv_string_new(addr);
-	uc_value_push(ucv_get(val));
-
-	val = ucv_object_new(vm);
-	if (sta->psk_idx)
-		ucv_object_add(val, "psk_idx", ucv_int64_new(sta->psk_idx - 1));
-	if (sta->psk)
-		ucv_object_add(val, "psk", ucv_string_new(sta->psk->passphrase));
-	uc_value_push(ucv_get(val));
-
-	val = wpa_ucode_call(3);
-	if (ucv_type(val) != UC_OBJECT)
-		goto out;
-
-	cur = ucv_object_get(val, "vlan", NULL);
-	if (ucv_type(cur) == UC_INTEGER) {
-		struct vlan_description vdesc = {
-			.notempty = 1,
-			.untagged = ucv_int64_get(cur),
-		};
-
-		ap_sta_set_vlan(hapd, sta, &vdesc);
-		ap_sta_bind_vlan(hapd, sta);
-	}
-
-out:
-	ucv_put(val);
-}
-
-int hostapd_ucode_init(struct hapd_interfaces *ifaces)
-{
-	static const uc_function_list_t global_fns[] = {
-		{ "printf",	uc_wpa_printf },
-		{ "getpid", uc_wpa_getpid },
-		{ "sha1", uc_wpa_sha1 },
-		{ "freq_info", uc_wpa_freq_info },
-		{ "add_iface", uc_hostapd_add_iface },
-		{ "remove_iface", uc_hostapd_remove_iface },
-	};
-	static const uc_function_list_t bss_fns[] = {
-		{ "ctrl", uc_hostapd_bss_ctrl },
-		{ "set_config", uc_hostapd_bss_set_config },
-		{ "rename", uc_hostapd_bss_rename },
-		{ "delete", uc_hostapd_bss_delete },
-	};
-	static const uc_function_list_t iface_fns[] = {
-		{ "set_bss_order", uc_hostapd_iface_set_bss_order },
-		{ "add_bss", uc_hostapd_iface_add_bss },
-		{ "stop", uc_hostapd_iface_stop },
-		{ "start", uc_hostapd_iface_start },
-		{ "switch_channel", uc_hostapd_iface_switch_channel },
-	};
-	uc_value_t *data, *proto;
-
-	interfaces = ifaces;
-	vm = wpa_ucode_create_vm();
-
-	global_type = uc_type_declare(vm, "hostapd.global", global_fns, NULL);
-	bss_type = uc_type_declare(vm, "hostapd.bss", bss_fns, NULL);
-	iface_type = uc_type_declare(vm, "hostapd.iface", iface_fns, NULL);
-
-	bss_registry = ucv_array_new(vm);
-	uc_vm_registry_set(vm, "hostap.bss_registry", bss_registry);
-
-	iface_registry = ucv_array_new(vm);
-	uc_vm_registry_set(vm, "hostap.iface_registry", iface_registry);
-
-	global = wpa_ucode_global_init("hostapd", global_type);
-
-	if (wpa_ucode_run(HOSTAPD_UC_PATH "hostapd.uc"))
-		goto free_vm;
-	ucv_gc(vm);
-
-	return 0;
-
-free_vm:
-	wpa_ucode_free_vm();
-	return -1;
-}
-
-void hostapd_ucode_free(void)
-{
-	if (wpa_ucode_call_prepare("shutdown") == 0)
-		ucv_put(wpa_ucode_call(0));
-	wpa_ucode_free_vm();
-}
-
-void hostapd_ucode_free_iface(struct hostapd_iface *iface)
-{
-	wpa_ucode_registry_remove(iface_registry, iface->ucode.idx);
-}
-
-int hostapd_ucode_afc_request(struct hostapd_iface *iface, const char *request,
-			      char *buf, size_t len)
-{
-	uc_value_t *val;
-	size_t ret_len;
-	int ret = -1;
-
-	if (wpa_ucode_call_prepare("afc_request"))
-		return -1;
-
-	uc_value_push(ucv_get(ucv_string_new(iface->phy)));
-	uc_value_push(ucv_get(ucv_string_new(request)));
-	val = wpa_ucode_call(2);
-	if (ucv_type(val) != UC_STRING)
-		goto out;
-
-	ret_len = ucv_string_length(val);
-	if (ret_len >= len)
-		goto out;
-
-	memcpy(buf, ucv_string_get(val), ret_len + 1);
-	ret = (int)ret_len;
-
-out:
-	ucv_put(val);
-	return ret;
-}
-
-void hostapd_ucode_add_bss(struct hostapd_data *hapd)
-{
-	uc_value_t *val;
-
-	if (wpa_ucode_call_prepare("bss_add"))
-		return;
-
-	val = hostapd_ucode_bss_get_uval(hapd);
-	uc_value_push(ucv_get(ucv_string_new(hapd->conf->iface)));
-	uc_value_push(ucv_get(val));
-	ucv_put(wpa_ucode_call(2));
-	ucv_gc(vm);
-}
-
-void hostapd_ucode_reload_bss(struct hostapd_data *hapd)
-{
-	uc_value_t *val;
-
-	if (wpa_ucode_call_prepare("bss_reload"))
-		return;
-
-	val = hostapd_ucode_bss_get_uval(hapd);
-	uc_value_push(ucv_get(ucv_string_new(hapd->conf->iface)));
-	uc_value_push(ucv_get(val));
-	ucv_put(wpa_ucode_call(2));
-	ucv_gc(vm);
-}
-
-void hostapd_ucode_free_bss(struct hostapd_data *hapd)
-{
-	uc_value_t *val;
-
-	val = wpa_ucode_registry_remove(bss_registry, hapd->ucode.idx);
-	if (!val)
-		return;
-
-	hapd->ucode.idx = 0;
-	if (wpa_ucode_call_prepare("bss_remove"))
-		return;
-
-	uc_value_push(ucv_string_new(hapd->conf->iface));
-	uc_value_push(ucv_get(val));
-	ucv_put(wpa_ucode_call(2));
-	ucv_gc(vm);
-}

feeds/hostapd/hostapd/src/src/ap/ucode.h

@@ -1,65 +0,0 @@
-#ifndef __HOSTAPD_AP_UCODE_H
-#define __HOSTAPD_AP_UCODE_H
-
-#include "utils/ucode.h"
-
-struct hostapd_data;
-
-struct hostapd_ucode_bss {
-#ifdef UCODE_SUPPORT
-	int idx;
-#endif
-};
-
-struct hostapd_ucode_iface {
-#ifdef UCODE_SUPPORT
-	int idx;
-#endif
-};
-
-#ifdef UCODE_SUPPORT
-
-int hostapd_ucode_init(struct hapd_interfaces *ifaces);
-
-void hostapd_ucode_free(void);
-void hostapd_ucode_free_iface(struct hostapd_iface *iface);
-int hostapd_ucode_sta_auth(struct hostapd_data *hapd, struct sta_info *sta);
-void hostapd_ucode_sta_connected(struct hostapd_data *hapd, struct sta_info *sta);
-void hostapd_ucode_add_bss(struct hostapd_data *hapd);
-void hostapd_ucode_free_bss(struct hostapd_data *hapd);
-void hostapd_ucode_reload_bss(struct hostapd_data *hapd);
-int hostapd_ucode_afc_request(struct hostapd_iface *iface, const char *request,
-			      char *buf, size_t len);
-
-#else
-
-static inline int hostapd_ucode_init(struct hapd_interfaces *ifaces)
-{
-	return -EINVAL;
-}
-static inline void hostapd_ucode_free(void)
-{
-}
-static inline void hostapd_ucode_free_iface(struct hostapd_iface *iface)
-{
-}
-static inline void hostapd_ucode_reload_bss(struct hostapd_data *hapd)
-{
-}
-static inline int hostapd_ucode_sta_auth(struct hostapd_data *hapd, struct sta_info *sta)
-{
-	return 0;
-}
-static inline void hostapd_ucode_sta_connected(struct hostapd_data *hapd, struct sta_info *sta)
-{
-}
-static inline void hostapd_ucode_add_bss(struct hostapd_data *hapd)
-{
-}
-static inline void hostapd_ucode_free_bss(struct hostapd_data *hapd)
-{
-}
-
-#endif
-
-#endif

feeds/ipq40xx/ipq40xx/Makefile

@@ -14,12 +14,6 @@ DEVICE_TYPE:=qsdk
 
 KERNELNAME:=zImage Image dtbs
 
-GENERIC_BACKPORT_DIR := ${CURDIR}/backport-$(KERNEL_PATCHVER)
-GENERIC_PATCH_DIR := ${CURDIR}/pending-$(KERNEL_PATCHVER)
-GENERIC_HACK_DIR := ${CURDIR}/hack-$(KERNEL_PATCHVER)
-GENERIC_FILES_DIR := 
-GENERIC_LINUX_CONFIG:=${CURDIR}/config-$(KERNEL_PATCHVER)-ipq40xx
-
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += \
 	kmod-usb-dwc3-qcom \

feeds/ipq40xx/ipq40xx/backport-5.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch

@@ -1,30 +0,0 @@
-From 13b1ecc3401653a355798eb1dee10cc1608202f4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 18 Jan 2016 12:27:49 +0100
-Subject: [PATCH 33/34] Kbuild: don't hardcode path to awk in
- scripts/ld-version.sh
-
-On some systems /usr/bin/awk does not exist, or is broken. Find it via
-$PATH instead.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- scripts/ld-version.sh | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/scripts/ld-version.sh
-+++ b/scripts/ld-version.sh
-@@ -1,6 +1,7 @@
--#!/usr/bin/awk -f
-+#!/bin/sh
- # SPDX-License-Identifier: GPL-2.0
- # extract linker version number from stdin and turn into single number
-+exec awk '
- 	{
- 	gsub(".*\\)", "");
- 	gsub(".*version ", "");
-@@ -9,3 +10,4 @@
- 	print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
- 	exit
- 	}
-+'