mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-11-02 03:17:48 +00:00
3affbc1cad
This series is based on * 2020-07-10 ipq6018-ilq-11-0_qca_oem-034672b0676c37b1f4519e5720e18e95fe6236ef Add support for * qsdk kernel/v4.4 * qsdk ethernet subsystem * v5.7 ath11k backport + QualComm staging patches (wlan_ap_1.0) * ath11k-firmware * hostapd/iw/... Feature support * full boot, system detection * sysupgrade to nand * HE support via latest hostapd * driver support for usb, crypto, hwmon, cpufreq, ... Missing * NSS/HW flow offloading - FW blob is not redistributable Using the qsdk v4.4 is an intermediate solution while the vanilla is being tested. Vanilla kernel is almost on feature par. Work has already started to upstream the ethernet and switch drivers. Once complete the target will be fully upstream. Signed-off-by: John Crispin <john@phrozen.org>
125 lines
3.9 KiB
Diff
125 lines
3.9 KiB
Diff
From c05ace7510ead96e72b97ce47b33f7b5865d6d36 Mon Sep 17 00:00:00 2001
|
|
From: Peter Oh <peter.oh@bowerswilkins.com>
|
|
Date: Mon, 27 Aug 2018 14:28:38 -0700
|
|
Subject: [PATCH 1/7] mesh: use setup completion callback to complete mesh join
|
|
|
|
mesh join function is the last function to be called during
|
|
mesh join process, but it's been called a bit earlier than
|
|
it's supposed to be, so that some mesh parameter values
|
|
such as VHT capabilities not applied correct when mesh join
|
|
is in process.
|
|
Moreover current design of mesh join that is called directly
|
|
after mesh initialization isn't suitable for DFS channels to use,
|
|
since mesh join process should be paused until DFS CAC is
|
|
done and resumed after it's done.
|
|
The callback will be called by hostapd_setup_interface_complete_sync.
|
|
There is possiblity that completing mesh init fails, so add error
|
|
handle codes.
|
|
|
|
Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
|
|
Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
|
|
---
|
|
src/ap/hostapd.c | 11 ++++++++++-
|
|
wpa_supplicant/mesh.c | 13 +++++++------
|
|
2 files changed, 17 insertions(+), 7 deletions(-)
|
|
|
|
--- a/src/ap/hostapd.c
|
|
+++ b/src/ap/hostapd.c
|
|
@@ -434,6 +434,8 @@ static void hostapd_free_hapd_data(struc
|
|
#ifdef CONFIG_MESH
|
|
wpabuf_free(hapd->mesh_pending_auth);
|
|
hapd->mesh_pending_auth = NULL;
|
|
+ /* handling setup failure is already done */
|
|
+ hapd->setup_complete_cb = NULL;
|
|
#endif /* CONFIG_MESH */
|
|
|
|
hostapd_clean_rrm(hapd);
|
|
@@ -2156,6 +2158,13 @@ dfs_offload:
|
|
if (hapd->setup_complete_cb)
|
|
hapd->setup_complete_cb(hapd->setup_complete_cb_ctx);
|
|
|
|
+#ifdef CONFIG_MESH
|
|
+ if (delay_apply_cfg && !iface->mconf) {
|
|
+ wpa_printf(MSG_ERROR, "Error while completing mesh init");
|
|
+ goto fail;
|
|
+ }
|
|
+#endif /* CONFIG_MESH */
|
|
+
|
|
wpa_printf(MSG_DEBUG, "%s: Setup of interface done.",
|
|
iface->bss[0]->conf->iface);
|
|
if (iface->interfaces && iface->interfaces->terminate_on_error > 0)
|
|
@@ -2299,7 +2308,7 @@ int hostapd_setup_interface(struct hosta
|
|
ret = setup_interface(iface);
|
|
if (ret) {
|
|
wpa_printf(MSG_ERROR, "%s: Unable to setup interface.",
|
|
- iface->bss[0]->conf->iface);
|
|
+ iface->conf ? iface->conf->bss[0]->iface : "N/A");
|
|
return -1;
|
|
}
|
|
|
|
--- a/wpa_supplicant/mesh.c
|
|
+++ b/wpa_supplicant/mesh.c
|
|
@@ -194,8 +194,9 @@ static int wpas_mesh_init_rsn(struct wpa
|
|
}
|
|
|
|
|
|
-static int wpas_mesh_complete(struct wpa_supplicant *wpa_s)
|
|
+static void wpas_mesh_complete_cb(void *ctx)
|
|
{
|
|
+ struct wpa_supplicant *wpa_s = ctx;
|
|
struct hostapd_iface *ifmsh = wpa_s->ifmsh;
|
|
struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
|
|
struct wpa_ssid *ssid = wpa_s->current_ssid;
|
|
@@ -204,7 +205,7 @@ static int wpas_mesh_complete(struct wpa
|
|
if (!params || !ssid || !ifmsh) {
|
|
wpa_printf(MSG_ERROR, "mesh: %s called without active mesh",
|
|
__func__);
|
|
- return -1;
|
|
+ return;
|
|
}
|
|
|
|
if (ifmsh->mconf->security != MESH_CONF_SEC_NONE &&
|
|
@@ -213,7 +214,7 @@ static int wpas_mesh_complete(struct wpa
|
|
"mesh: RSN initialization failed - deinit mesh");
|
|
wpa_supplicant_mesh_deinit(wpa_s);
|
|
wpa_drv_leave_mesh(wpa_s);
|
|
- return -1;
|
|
+ return;
|
|
}
|
|
|
|
if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
|
|
@@ -239,8 +240,6 @@ static int wpas_mesh_complete(struct wpa
|
|
|
|
if (!ret)
|
|
wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
|
|
-
|
|
- return ret;
|
|
}
|
|
|
|
|
|
@@ -267,6 +266,7 @@ static int wpa_supplicant_mesh_init(stru
|
|
if (!ifmsh)
|
|
return -ENOMEM;
|
|
|
|
+ ifmsh->owner = wpa_s;
|
|
ifmsh->drv_flags = wpa_s->drv_flags;
|
|
ifmsh->drv_flags2 = wpa_s->drv_flags2;
|
|
ifmsh->num_bss = 1;
|
|
@@ -285,6 +285,8 @@ static int wpa_supplicant_mesh_init(stru
|
|
bss->drv_priv = wpa_s->drv_priv;
|
|
bss->iface = ifmsh;
|
|
bss->mesh_sta_free_cb = mesh_mpm_free_sta;
|
|
+ bss->setup_complete_cb = wpas_mesh_complete_cb;
|
|
+ bss->setup_complete_cb_ctx = wpa_s;
|
|
frequency = ssid->frequency;
|
|
if (frequency != freq->freq &&
|
|
frequency == freq->freq + freq->sec_channel_offset * 20) {
|
|
@@ -526,7 +528,6 @@ int wpa_supplicant_join_mesh(struct wpa_
|
|
goto out;
|
|
}
|
|
|
|
- ret = wpas_mesh_complete(wpa_s);
|
|
out:
|
|
return ret;
|
|
}
|