mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-10-29 09:32:34 +00:00
386 lines
10 KiB
Plaintext
Executable File
386 lines
10 KiB
Plaintext
Executable File
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/*
|
|
* IPQ5332 AP-MI01.6 board device tree source
|
|
*
|
|
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include "ipq5332.dtsi"
|
|
#include "ipq5332-default-memory.dtsi"
|
|
|
|
/ {
|
|
model = "SONICFI RAP7110C-341X";
|
|
compatible = "sonicfi,rap7110c-341x","qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart0;
|
|
ethernet0 = "/soc/dp1";
|
|
led-boot = &led_power;
|
|
led-failsafe = &led_power;
|
|
led-running = &led_power;
|
|
led-upgrade = &led_power;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0";
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
ramoops@49c00000 {
|
|
compatible = "ramoops";
|
|
reg = <0x0 0x49c00000 0x0 0x100000>;
|
|
record-size = <0x20000>;
|
|
console-size = <0x20000>;
|
|
pmsg-size = <0x20000>;
|
|
};
|
|
};
|
|
|
|
soc@0 {
|
|
mdio:mdio@90000 {
|
|
pinctrl-0 = <&mdio1_pins>;
|
|
pinctrl-names = "default";
|
|
phy-reset-gpio = <&tlmm 49 GPIO_ACTIVE_LOW>;
|
|
phyaddr_fixup = <0xC90F018>;
|
|
uniphyaddr_fixup = <0xC90F014>;
|
|
mdio_clk_fixup; /* MDIO clock sequence fix up flag */
|
|
status = "okay";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
compatible ="ethernet-phy-ieee802.3-c45";
|
|
reg = <8>;
|
|
realtek,clkout-disable;
|
|
realtek,aldps-enable;
|
|
};
|
|
};
|
|
|
|
ess-instance {
|
|
num_devices = <0x1>;
|
|
ess-switch@3a000000 {
|
|
switch_cpu_bmp = <0x1>; /* cpu port bitmap */
|
|
switch_lan_bmp = <0x2>; /* lan port bitmap */
|
|
switch_wan_bmp = <0x0>; /* wan port bitmap */
|
|
switch_mac_mode = <0xd>; /* mac mode for uniphy instance0*/
|
|
switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
|
|
switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
|
|
qcom,port_phyinfo {
|
|
port@0 {
|
|
port_id = <1>;
|
|
phy_address = <8>;
|
|
mdiobus = <&mdio>;
|
|
ethernet-phy-ieee802.3-c45;
|
|
};
|
|
port@1 {
|
|
port_id = <2>;
|
|
forced-speed = <2500>;
|
|
forced-duplex = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dp1 {
|
|
device_type = "network";
|
|
compatible = "qcom,nss-dp";
|
|
qcom,id = <1>;
|
|
reg = <0x3a500000 0x4000>;
|
|
qcom,mactype = <1>;
|
|
local-mac-address = [000000000000];
|
|
qcom,phy-mdio-addr = <8>;
|
|
qcom,link-poll = <1>;
|
|
phy-mode = "usxgmii";
|
|
};
|
|
|
|
/* EDMA host driver configuration for the board */
|
|
edma@3ab00000 {
|
|
qcom,txdesc-ring-start = <4>; /* Tx desc ring start ID */
|
|
qcom,txdesc-rings = <12>; /* Total number of Tx desc rings to be provisioned */
|
|
qcom,mht-txdesc-rings = <8>; /* Extra Tx desc rings to be provisioned for MHT SW ports. */
|
|
qcom,txcmpl-ring-start = <4>; /* Tx complete ring start ID */
|
|
qcom,txcmpl-rings = <12>; /* Total number of Tx complete rings to be provisioned */
|
|
qcom,mht-txcmpl-rings = <8>; /* Extra Tx complete rings to be provisioned for mht sw ports. */
|
|
qcom,rxfill-ring-start = <4>; /* Rx fill ring start ID */
|
|
qcom,rxfill-rings = <4>; /* Total number of Rx fill rings to be provisioned */
|
|
qcom,rxdesc-ring-start = <12>; /* Rx desc ring start ID */
|
|
qcom,rxdesc-rings = <4>; /* Total number of Rx desc rings to be provisioned */
|
|
qcom,rx-page-mode = <0>; /* Rx fill ring page mode */
|
|
qcom,tx-map-priority-level = <1>; /* Tx priority level per port */
|
|
qcom,rx-map-priority-level = <1>; /* Rx priority level per core */
|
|
qcom,ppeds-num = <2>; /* Number of PPEDS nodes */
|
|
/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
|
|
qcom,ppeds-map = <1 1 1 1 32 8>, /* PPEDS Node#0 ring and queue map */
|
|
<2 2 2 2 40 8>; /* PPEDS Node#1 ring and queue map */
|
|
qcom,txdesc-map = <8 9 10 11>, /* Port0 per-core Tx ring map */
|
|
<12 13 14 15>, /* MHT-Port1 per-core Tx ring map */
|
|
<4 5 6 7>, /* MHT-Port2 per-core Tx ring map/packets from vp*/
|
|
<16 17 18 19>, /* MHT-Port3 per-core Tx ring map */
|
|
<20 21 22 23>; /* MHT-Port4 per-core Tx ring map */
|
|
qcom,txdesc-fc-grp-map = <1 2 3 4 5>; /* Per GMAC flow control group map */
|
|
qcom,rxfill-map = <4 5 6 7>; /* Per-core Rx fill ring map */
|
|
qcom,rxdesc-map = <12 13 14 15>; /* Per-core Rx desc ring map */
|
|
qcom,rx-queue-start = <0>; /* Rx queue start */
|
|
qcom,rx-ring-queue-map = <0 8 16 24>, /* Priority 0 queues per-core Rx ring map */
|
|
<1 9 17 25>, /* Priority 1 queues per-core Rx ring map */
|
|
<2 10 18 26>, /* Priority 2 queues per-core Rx ring map */
|
|
<3 11 19 27>, /* Priority 3 queues per-core Rx ring map */
|
|
<4 12 20 28>, /* Priority 4 queues per-core Rx ring map */
|
|
<5 13 21 29>, /* Priority 5 queues per-core Rx ring map */
|
|
<6 14 22 30>, /* Priority 6 queues per-core Rx ring map */
|
|
<7 15 23 31>; /* Priority 7 queues per-core Rx ring map */
|
|
interrupts = <0 163 4>, /* Tx complete ring id #4 IRQ info */
|
|
<0 164 4>, /* Tx complete ring id #5 IRQ info */
|
|
<0 165 4>, /* Tx complete ring id #6 IRQ info */
|
|
<0 166 4>, /* Tx complete ring id #7 IRQ info */
|
|
<0 167 4>, /* Tx complete ring id #8 IRQ info */
|
|
<0 168 4>, /* Tx complete ring id #9 IRQ info */
|
|
<0 169 4>, /* Tx complete ring id #10 IRQ info */
|
|
<0 170 4>, /* Tx complete ring id #11 IRQ info */
|
|
<0 171 4>, /* Tx complete ring id #12 IRQ info */
|
|
<0 172 4>, /* Tx complete ring id #13 IRQ info */
|
|
<0 173 4>, /* Tx complete ring id #14 IRQ info */
|
|
<0 174 4>, /* Tx complete ring id #15 IRQ info */
|
|
<0 139 4>, /* Rx desc ring id #12 IRQ info */
|
|
<0 140 4>, /* Rx desc ring id #13 IRQ info */
|
|
<0 141 4>, /* Rx desc ring id #14 IRQ info */
|
|
<0 142 4>, /* Rx desc ring id #15 IRQ info */
|
|
<0 191 4>, /* Misc error IRQ info */
|
|
<0 160 4>, /* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
|
|
<0 128 4>, /* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
|
|
<0 152 4>, /* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
|
|
<0 161 4>, /* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
|
|
<0 129 4>, /* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
|
|
<0 153 4>, /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
|
|
<0 175 4>, /* MHT port Tx complete ring id #16 IRQ info */
|
|
<0 176 4>, /* MHT port Tx complete ring id #17 IRQ info */
|
|
<0 177 4>, /* MHT port Tx complete ring id #18 IRQ info */
|
|
<0 178 4>, /* MHT port Tx complete ring id #19 IRQ info */
|
|
<0 179 4>, /* MHT port Tx complete ring id #20 IRQ info */
|
|
<0 180 4>, /* MHT port Tx complete ring id #21 IRQ info */
|
|
<0 181 4>, /* MHT port Tx complete ring id #22 IRQ info */
|
|
<0 182 4>; /* MHT port Tx complete ring id #23 IRQ info */
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&button_pins>;
|
|
pinctrl-names = "default";
|
|
button@1 {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
debounce-interval = <60>;
|
|
};
|
|
};
|
|
|
|
pwmleds {
|
|
compatible = "pwm-leds";
|
|
|
|
red {
|
|
label = "pwm:red";
|
|
pwms = <&pwm 0 1250000>;
|
|
max-brightness = <160>;
|
|
linux,default-trigger = "none";
|
|
};
|
|
|
|
green {
|
|
label = "pwm:green";
|
|
pwms = <&pwm 2 1250000>;
|
|
max-brightness = <160>;
|
|
linux,default-trigger = "none";
|
|
};
|
|
|
|
led_power: blue {
|
|
label = "pwm:blue";
|
|
pwms = <&pwm 1 1250000>;
|
|
max-brightness = <160>;
|
|
linux,default-trigger = "none";
|
|
};
|
|
};
|
|
|
|
wsi: wsi {
|
|
id = <0>;
|
|
num_chip = <2>;
|
|
chip_info = <0 1 1>,
|
|
<1 1 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
button_pins: button-state {
|
|
pins = "gpio24";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
sdc_default_state: sdc-default-state {
|
|
clk-pins {
|
|
pins = "gpio13";
|
|
function = "sdc_clk";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-pins {
|
|
pins = "gpio12";
|
|
function = "sdc_cmd";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
|
function = "sdc_data";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
pwm_pins: pwm_pinmux {
|
|
/* PWM LED GREEN */
|
|
mux_1 {
|
|
pins = "gpio30";
|
|
function = "pwm1";
|
|
drive-strength = <8>;
|
|
};
|
|
/* PWM LED BLUE */
|
|
mux_2 {
|
|
pins = "gpio31";
|
|
function = "pwm1";
|
|
drive-strength = <8>;
|
|
};
|
|
/* PWM LED RED */
|
|
mux_3 {
|
|
pins = "gpio32";
|
|
function = "pwm1";
|
|
drive-strength = <8>;
|
|
};
|
|
};
|
|
|
|
pcie1_default_state: pcie1-default-state {
|
|
pins = "gpio47";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
&wifi0 {
|
|
qcom,rproc = <&q6_wcss_pd1>;
|
|
qcom,rproc_rpd = <&q6v5_wcss>;
|
|
qcom,multipd_arch;
|
|
qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
|
|
#if defined(__CNSS2__)
|
|
mem-region = <&q6_region>;
|
|
#else
|
|
memory-region = <&q6_region>;
|
|
qcom,wsi = <&wsi>;
|
|
qcom,wsi_index = <0>;
|
|
#endif
|
|
qcom,board_id = <0x12>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* QCN9224 5G+6G */
|
|
/*
|
|
&wifi2 {
|
|
hremote_node = <&qcn9224_pcie1>;
|
|
board_id = <0x1015>;
|
|
status = "okay";
|
|
}; */
|
|
|
|
&qcn9224_pcie1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_uart0 {
|
|
pinctrl-0 = <&serial_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc {
|
|
bus-width = <4>;
|
|
max-frequency = <192000000>;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
pinctrl-0 = <&sdc_default_state>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&sleep_clk {
|
|
clock-frequency = <32000>;
|
|
};
|
|
|
|
&xo {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
&qpic_bam {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1_phy_x2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1 {
|
|
pinctrl-0 = <&pcie1_default_state>;
|
|
pinctrl-names = "default";
|
|
perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
pcie1_rp {
|
|
reg = <0 0 0 0 0>;
|
|
|
|
qcom,mhi@1 {
|
|
reg = <0 0 0 0 0>;
|
|
boot-args = <0x2 0x4 0x34 0x3 0x0 0x0 /* MX Rail, GPIO52, Drive strength 0x3 */
|
|
0x4 0x4 0x18 0x3 0x0 0x0 /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
|
|
0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
|
|
memory-region = <&qcn9224_pcie1>;
|
|
qcom,wsi = <&wsi>;
|
|
qcom,wsi_index = <1>;
|
|
qcom,board_id = <0x1015>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&license_manager {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3 {
|
|
qcom,multiplexed-phy;
|
|
status = "disabled";
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-0 = <&pwm_pins>;
|
|
used-pwm-indices = <1>, <1>, <1>, <0>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&hs_m31phy_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssuniphy_0 {
|
|
status = "okay";
|
|
};
|