scottk/wlan-ap
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-ap.git synced 2025-10-29 17:42:41 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity
Files
73d949cf3f5e6b37533ed8e9ab673515b9433696
wlan-ap/patches/0039-ipq807x-drop-upstream-target.patch
John Crispin 73d949cf3f 23.05: update patches 
Signed-off-by: John Crispin <john@phrozen.org>
2023-09-28 14:50:26 +02:00

31099 lines
964 KiB
Diff
Raw Blame History

From 2a47e049084cd27d3277056d488329f4d4c9cd4b Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Sat, 15 Jul 2023 16:11:53 +0200
Subject: [PATCH 39/43] ipq807x: drop upstream target
Signed-off-by: John Crispin <john@phrozen.org>
---
target/linux/ipq807x/Makefile | 22 -
.../ipq807x/base-files/etc/board.d/01_leds | 33 -
.../ipq807x/base-files/etc/board.d/02_network | 52 -
.../etc/hotplug.d/firmware/11-ath11k-caldata | 43 -
.../ipq807x/base-files/etc/init.d/bootcount | 13 -
.../ipq807x/base-files/lib/upgrade/buffalo.sh | 55 -
.../ipq807x/base-files/lib/upgrade/mmc.sh | 83 -
.../base-files/lib/upgrade/platform.sh | 116 -
target/linux/ipq807x/config-5.15 | 509 -
.../arm64/boot/dts/qcom/ipq8070-cax1800.dts | 322 -
.../arm64/boot/dts/qcom/ipq8071-ax3600.dts | 73 -
.../arm64/boot/dts/qcom/ipq8071-ax3600.dtsi | 311 -
.../arch/arm64/boot/dts/qcom/ipq8071-ax6.dts | 46 -
.../arm64/boot/dts/qcom/ipq8071-eap102.dts | 389 -
.../arch/arm64/boot/dts/qcom/ipq8072-301w.dts | 410 -
.../arm64/boot/dts/qcom/ipq8072-ax9000.dts | 522 -
.../arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts | 243 -
.../arch/arm64/boot/dts/qcom/ipq8072-haze.dts | 308 -
.../arm64/boot/dts/qcom/ipq8072-wax218.dts | 191 -
.../arm64/boot/dts/qcom/ipq8074-512m.dtsi | 19 -
.../arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi | 153 -
.../boot/dts/qcom/ipq8074-cpr-regulator.dtsi | 228 -
.../arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi | 531 -
.../arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi | 218 -
.../arm64/boot/dts/qcom/ipq8074-nbg7815.dts | 445 -
.../boot/dts/qcom/ipq8074-wxr-5950ax12.dts | 376 -
target/linux/ipq807x/generic/target.mk | 1 -
target/linux/ipq807x/image/Makefile | 17 -
target/linux/ipq807x/image/generic.mk | 175 -
...-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch | 43 -
...pdate-BAM-DMA-node-name-per-DT-schem.patch | 26 -
...4-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch | 40 -
...sm8996-Move-clock-cells-to-QMP-PHY-c.patch | 53 -
...-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch | 36 -
...64-dts-qcom-ipq8074-add-SMEM-support.patch | 51 -
...ipq8074-add-the-reserved-memory-node.patch | 30 -
...om-ipq8074-enable-the-GICv2m-support.patch | 36 -
...pq8074-drop-the-clock-frequency-prop.patch | 25 -
...lign-dmas-in-I2C-SPI-UART-with-DT-sc.patch | 61 -
...lign-clocks-in-I2C-SPI-with-DT-schem.patch | 68 -
...orrect-DWC3-node-names-and-unit-addr.patch | 36 -
...pq8074-add-dedicated-qcom-ipq8074-dw.patch | 36 -
...align-DWC3-USB-clocks-with-DT-schema.patch | 39 -
...64-dts-qcom-adjust-whitespace-around.patch | 36 -
...ts-qcom-Fix-sdhci-node-names-use-mmc.patch | 34 -
...ix-ordering-of-clocks-clock-names-fo.patch | 47 -
...ck-qcom-ipq8074-add-PPE-crypto-clock.patch | 25 -
...lk-qcom-ipq8074-add-PPE-crypto-clock.patch | 52 -
...ngs-clock-qcom-ipq8074-add-USB-GDSCs.patch | 25 -
...-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch | 79 -
...s-qcom-ipq8074-add-USB-power-domains.patch | 43 -
...pq8074-move-ARMv8-timer-out-of-SoC-n.patch | 50 -
...-dts-qcom-ipq8074-add-reset-to-SDHCI.patch | 27 -
...com-ipq8074-drop-USB-PHY-clock-index.patch | 36 -
...s-ipc-Consolidate-msm8994-type-apcs_.patch | 74 -
...s-ipc-add-IPQ8074-APSS-clock-support.patch | 30 -
...arm64-dts-qcom-ipq8074-add-APCS-node.patch | 37 -
...pq8074-add-size-address-cells-to-DTS.patch | 54 -
...ipq8074-add-interrupt-parent-to-DTSI.patch | 50 -
...align-SDHCI-reg-names-with-DT-schema.patch | 28 -
...q-pll-use-OF-match-data-for-Alpha-PL.patch | 70 -
...q-pll-update-IPQ6018-Alpha-PLL-confi.patch | 40 -
...apss-ipq-pll-add-support-for-IPQ8074.patch | 47 -
...1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch | 51 -
...apss-ipq6018-fix-apcs_alias0_clk_src.patch | 63 -
...64-dts-qcom-ipq8074-add-A53-PLL-node.patch | 32 -
...pq8074-correct-APCS-register-space-s.patch | 32 -
...tsens-Add-support-for-combined-inter.patch | 134 -
...tsens-Allow-configuring-min-and-max-.patch | 101 -
...al-drivers-tsens-Add-IPQ8074-support.patch | 74 -
...4-dts-qcom-ipq8074-add-thermal-nodes.patch | 130 -
...-dts-qcom-ipq8074-add-clocks-to-APCS.patch | 29 -
...-qcom-ipq8074-convert-to-parent-data.patch | 3601 -----
...-Allow-specifying-custom-reset-delay.patch | 54 -
...eset-support-resetting-multiple-bits.patch | 59 -
...k-qcom-ipq8074-add-missing-networkin.patch | 39 -
...pq8074-add-missing-networking-resets.patch | 41 -
...074-populate-fw_name-for-all-parents.patch | 152 -
...pq8074-pass-XO-and-sleep-clocks-to-G.patch | 36 -
...eplace-deprecated-perst-gpio-with-pe.patch | 52 -
...r-to-look-up-an-SPMI-device-from-a-d.patch | 57 -
...-pmic-Sort-compatibles-in-the-driver.patch | 60 -
...ic-Add-missing-PMICs-supported-by-so.patch | 65 -
...ic-expose-the-PMIC-revid-information.patch | 417 -
...-pmic-read-fab-id-on-supported-PMICs.patch | 52 -
...om-spmi-pmic-Add-support-for-PMP8074.patch | 27 -
...or-qcom_spmi-add-support-for-HT_P150.patch | 58 -
...or-qcom_spmi-add-support-for-HT_P600.patch | 59 -
...pmi-add-support-for-PMP8074-regulato.patch | 68 -
...om-pmic-gpio-add-support-for-PMP8074.patch | 25 -
...i-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch | 26 -
...v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch | 149 -
...s-qcom-ipq8074-hk01-add-VQMMC-supply.patch | 37 -
...ts-qcom-hk01-use-GPIO-flags-for-tlmm.patch | 42 -
...m64-dts-qcom-ipq8074-Fix-up-comments.patch | 82 -
...pq8074-align-TLMM-pin-configuration-.patch | 60 -
...qcom-socinfo-Add-IPQ8074-family-ID-s.patch | 50 -
...ie-make-pipe-clock-rate-configurable.patch | 47 -
...e-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch | 200 -
...3_RELATED-DBI-definitions-to-common-.patch | 46 -
...slot-capabilities-using-PCI_EXP_SLTC.patch | 51 -
...-ops-with-struct-pcie_cfg-in-pcie-ma.patch | 122 -
...77-v6.0-PCI-qcom-Add-IPQ60xx-support.patch | 220 -
...che-CFG-register-updates-for-parked-.patch | 288 -
...qcom-document-qcom-msm-id-and-qcom-b.patch | 207 -
...2-introduce-support-for-multiple-con.patch | 203 -
...8074-rework-nss_port5-6-clock-to-mul.patch | 129 -
...ts-ipq8074-add-reserved-memory-nodes.patch | 70 -
...pq8074-set-Gen2-PCIe-pcie-max-link-s.patch | 24 -
...om-Add-support-for-IPQ8074-Gen3-port.patch | 23 -
...pq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch | 30 -
...qcom-ipq8074-use-msi-parent-for-PCIe.patch | 43 -
...remoteproc-qcom-Add-PRNG-proxy-clock.patch | 155 -
...moteproc-qcom-Add-secure-PIL-support.patch | 143 -
...Add-support-for-split-q6-m3-wlan-fir.patch | 103 -
...oc-qcom-Add-ssr-subdevice-identifier.patch | 24 -
...Update-regmap-offsets-for-halt-regis.patch | 79 -
...ngs-clock-qcom-Add-reset-for-WCSSAON.patch | 26 -
.../0118-clk-qcom-Add-WCSSAON-reset.patch | 25 -
...c-wcss-disable-auto-boot-for-IPQ8074.patch | 48 -
...com-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch | 120 -
...0121-arm64-dts-ipq8074-Add-WLAN-node.patch | 135 -
...0122-arm64-dts-ipq8074-add-CPU-clock.patch | 59 -
...q8074-add-cooling-cells-to-CPU-nodes.patch | 48 -
...-move-SMEM-item-struct-and-defines-t.patch | 168 -
...nvmem-reuse-socinfo-SMEM-item-struct.patch | 50 -
...com-nvmem-use-SoC-ID-s-from-bindings.patch | 46 -
...em-make-qcom_cpufreq_get_msm_id-retu.patch | 106 -
...q-qcom-nvmem-add-support-for-IPQ8074.patch | 100 -
...64-dts-qcom-ipq8074-add-QFPROM-fuses.patch | 128 -
...4-dts-qcom-ipq8074-add-CPU-OPP-table.patch | 102 -
...q8074-populate-fw_name-for-usb3phy-s.patch | 38 -
.../0900-power-Add-Qualcomm-APM.patch | 1047 --
...egulator-add-Qualcomm-CPR-regulators.patch | 12147 ----------------
...rm64-dts-ipq8074-add-label-to-clocks.patch | 24 -
135 files changed, 30006 deletions(-)
delete mode 100644 target/linux/ipq807x/Makefile
delete mode 100644 target/linux/ipq807x/base-files/etc/board.d/01_leds
delete mode 100644 target/linux/ipq807x/base-files/etc/board.d/02_network
delete mode 100644 target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
delete mode 100755 target/linux/ipq807x/base-files/etc/init.d/bootcount
delete mode 100644 target/linux/ipq807x/base-files/lib/upgrade/buffalo.sh
delete mode 100644 target/linux/ipq807x/base-files/lib/upgrade/mmc.sh
delete mode 100644 target/linux/ipq807x/base-files/lib/upgrade/platform.sh
delete mode 100644 target/linux/ipq807x/config-5.15
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8070-cax1800.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax6.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-wax218.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts
delete mode 100644 target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts
delete mode 100644 target/linux/ipq807x/generic/target.mk
delete mode 100644 target/linux/ipq807x/image/Makefile
delete mode 100644 target/linux/ipq807x/image/generic.mk
delete mode 100644 target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch
delete mode 100644 target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch
diff --git a/target/linux/ipq807x/Makefile b/target/linux/ipq807x/Makefile
deleted file mode 100644
index f423acd76c..0000000000
--- a/target/linux/ipq807x/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-ARCH:=aarch64
-BOARD:=ipq807x
-BOARDNAME:=Qualcomm Atheros IPQ807x
-FEATURES:=squashfs ramdisk fpu nand rtc emmc
-KERNELNAME:=Image dtbs
-CPU_TYPE:=cortex-a53
-SUBTARGETS:=generic
-
-KERNEL_PATCHVER:=5.15
-
-include $(INCLUDE_DIR)/target.mk
-DEFAULT_PACKAGES += \
- kmod-usb3 kmod-usb-dwc3 kmod-usb-dwc3-qcom \
- kmod-leds-gpio kmod-gpio-button-hotplug \
- kmod-phy-aquantia kmod-qca-nss-dp \
- ath11k-firmware-ipq8074 kmod-ath11k-ahb \
- wpad-basic-mbedtls uboot-envtools \
- e2fsprogs kmod-fs-ext4 losetup
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/ipq807x/base-files/etc/board.d/01_leds b/target/linux/ipq807x/base-files/etc/board.d/01_leds
deleted file mode 100644
index a89b4c1564..0000000000
--- a/target/linux/ipq807x/base-files/etc/board.d/01_leds
+++ /dev/null
@@ -1,33 +0,0 @@
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-edgecore,eap102)
- ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
- ;;
-netgear,wax218)
- ucidef_set_led_netdev "lan" "LAN" "blue:lan" "lan"
- ucidef_set_led_wlan "wlan5g" "WIFI 5GHz" "blue:wlan5g" "phy0radio"
- ucidef_set_led_wlan "wlan2g" "WIFI 2.4GHz" "blue:wlan2g" "phy1radio"
- ;;
-redmi,ax6|\
-xiaomi,ax3600)
- ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
- ;;
-qnap,301w)
- ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
- ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
- ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
- ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
- ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
- ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
- ;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network
deleted file mode 100644
index 21364337fb..0000000000
--- a/target/linux/ipq807x/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# Copyright (c) 2015 The Linux Foundation. All rights reserved.
-# Copyright (c) 2011-2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-ipq807x_setup_interfaces()
-{
- local board="$1"
-
- case "$board" in
- buffalo,wxr-5950ax12|\
- dynalink,dl-wrx36|\
- xiaomi,ax9000)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
- ;;
- edgecore,eap102)
- ucidef_set_interfaces_lan_wan "lan" "wan"
- ;;
- edimax,cax1800)
- ucidef_set_interfaces_lan_wan "lan"
- ;;
- netgear,wax218)
- ucidef_set_interface_lan "lan" "dhcp"
- ;;
- prpl,haze)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
- ;;
- qnap,301w)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
- ;;
- redmi,ax6|\
- xiaomi,ax3600)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
- ;;
- zyxel,nbg7815)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan"
- ;;
- *)
- echo "Unsupported hardware. Network interfaces not initialized"
- ;;
- esac
-}
-
-board_config_update
-board=$(board_name)
-ipq807x_setup_interfaces $board
-board_config_flush
-
-exit 0
diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
deleted file mode 100644
index 13cb07477e..0000000000
--- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
- case "$board" in
- buffalo,wxr-5950ax12|\
- edgecore,eap102|\
- edimax,cax1800|\
- dynalink,dl-wrx36|\
- netgear,wax218|\
- qnap,301w|\
- redmi,ax6|\
- xiaomi,ax3600|\
- xiaomi,ax9000|\
- zyxel,nbg7815)
- caldata_extract "0:art" 0x1000 0x20000
- ;;
- prpl,haze)
- caldata_extract_mmc "0:ART" 0x1000 0x20000
- ;;
- esac
- ;;
-"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
-"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
- case "$board" in
- prpl,haze)
- caldata_extract_mmc "0:ART" 0x26800 0x20000
- ;;
- xiaomi,ax9000)
- caldata_extract "0:art" 0x26800 0x20000
- ;;
- esac
- ;;
-*)
- exit 1
- ;;
-esac
diff --git a/target/linux/ipq807x/base-files/etc/init.d/bootcount b/target/linux/ipq807x/base-files/etc/init.d/bootcount
deleted file mode 100755
index 6917446a9b..0000000000
--- a/target/linux/ipq807x/base-files/etc/init.d/bootcount
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot() {
- case $(board_name) in
- edgecore,eap102)
- fw_setenv upgrade_available 0
- # Unset changed flag after sysupgrade complete
- fw_setenv changed
- ;;
- esac
-}
diff --git a/target/linux/ipq807x/base-files/lib/upgrade/buffalo.sh b/target/linux/ipq807x/base-files/lib/upgrade/buffalo.sh
deleted file mode 100644
index d0ed258890..0000000000
--- a/target/linux/ipq807x/base-files/lib/upgrade/buffalo.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-. /lib/functions.sh
-
-# Prepare UBI devices for OpenWrt installation
-# - rootfs (mtd22)
-# - remove "ubi_rootfs" volume (rootfs on stock)
-# - remove "fw_hash" volume (firmware hash)
-# - user_property (mtd24)
-# - remove "user_property_ubi" volume (user configuration)
-# - remove "extra_property" volume (gzipped syslog)
-buffalo_upgrade_prepare() {
- local ubi_rootdev ubi_propdev
-
- if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
- ! ubi_propdev="$(nand_attach_ubi user_property)"; then
- echo "failed to attach UBI volume \"rootfs\" or \"user_property\", rebooting..."
- reboot -f
- fi
-
- ubirmvol /dev/$ubi_rootdev -N ubi_rootfs &> /dev/null || true
- ubirmvol /dev/$ubi_rootdev -N fw_hash &> /dev/null || true
-
- ubirmvol /dev/$ubi_propdev -N user_property_ubi &> /dev/null || true
- ubirmvol /dev/$ubi_propdev -N extra_property &> /dev/null || true
-}
-
-# Re-create small dummy ubi_rootfs volume and update
-# fw_hash volume to pass the checking by U-Boot
-# - rootfs (mtd22)
-# - re-create "ubi_rootfs" volume
-# - re-create and update "fw_hash" volume
-# - rootfs_recover (mtd23)
-# - update "fw_hash" volume
-buffalo_upgrade_optvol() {
- local ubi_rootdev ubi_rcvrdev
- local hashvol_root hashvol_rcvr
-
- if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
- ! ubi_rcvrdev="$(nand_attach_ubi rootfs_recover)"; then
- echo "failed to attach UBI volume \"rootfs\" or \"rootfs_recover\", rebooting..."
- reboot -f
- fi
-
- ubimkvol /dev/$ubi_rootdev -N ubi_rootfs -S 1
- ubimkvol /dev/$ubi_rootdev -N fw_hash -S 1 -t static
-
- if ! hashvol_root="$(nand_find_volume $ubi_rootdev fw_hash)" || \
- ! hashvol_rcvr="$(nand_find_volume $ubi_rcvrdev fw_hash)"; then
- echo "\"fw_hash\" volume in \"rootfs\" or \"rootfs_recover\" not found, rebooting..."
- reboot -f
- fi
-
- echo -n "00000000000000000000000000000000" > /tmp/dummyhash.txt
- ubiupdatevol /dev/$hashvol_root /tmp/dummyhash.txt
- ubiupdatevol /dev/$hashvol_rcvr /tmp/dummyhash.txt
-}
diff --git a/target/linux/ipq807x/base-files/lib/upgrade/mmc.sh b/target/linux/ipq807x/base-files/lib/upgrade/mmc.sh
deleted file mode 100644
index dac9ddd568..0000000000
--- a/target/linux/ipq807x/base-files/lib/upgrade/mmc.sh
+++ /dev/null
@@ -1,83 +0,0 @@
-#
-# Copyright (C) 2016 lede-project.org
-#
-
-# this can be used as a generic mmc upgrade script
-# just add a device entry in platform.sh,
-# define "kernelname" and "rootfsname" and call mmc_do_upgrade
-# after the kernel and rootfs flash a loopdev (as overlay) is
-# setup on top of the rootfs partition
-# for the proper function a padded rootfs image is needed, basically
-# append "pad-to 64k" to the image definition
-# this is based on the ipq806x zyxel.sh mmc upgrade
-
-. /lib/functions.sh
-
-mmc_do_upgrade() {
- local tar_file="$1"
- local rootfs=
- local kernel=
-
- [ -z "$kernel" ] && kernel=$(find_mmc_part ${kernelname})
- [ -z "$rootfs" ] && rootfs=$(find_mmc_part ${rootfsname})
-
- [ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f
- [ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f
-
- mmc_do_flash $tar_file $kernel $rootfs
-
- return 0
-}
-
-mmc_do_flash() {
- local tar_file=$1
- local kernel=$2
- local rootfs=$3
-
- # keep sure its unbound
- losetup --detach-all || {
- echo Failed to detach all loop devices. Skip this try.
- reboot -f
- }
-
- # use the first found directory in the tar archive
- local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
- board_dir=${board_dir%/}
-
- echo "flashing kernel to $kernel"
- tar xf $tar_file ${board_dir}/kernel -O >$kernel
-
- echo "flashing rootfs to ${rootfs}"
- tar xf $tar_file ${board_dir}/root -O >"${rootfs}"
-
- # a padded rootfs is needed for overlay fs creation
- local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
- [ $offset -lt 65536 ] && {
- echo Wrong size for rootfs: $offset
- sleep 10
- reboot -f
- }
-
- # Mount loop for rootfs_data
- local loopdev="$(losetup -f)"
- losetup -o $offset $loopdev $rootfs || {
- echo "Failed to mount looped rootfs_data."
- sleep 10
- reboot -f
- }
-
- echo "Format new rootfs_data at position ${offset}."
- mkfs.ext4 -F -L rootfs_data $loopdev
- mkdir /tmp/new_root
- mount -t ext4 $loopdev /tmp/new_root && {
- echo "Saving config to rootfs_data at position ${offset}."
- cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
- umount /tmp/new_root
- }
-
- # Cleanup
- losetup -d $loopdev >/dev/null 2>&1
- sync
- umount -a
- reboot -f
-}
diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index 346cc390f3..0000000000
--- a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,116 +0,0 @@
-PART_NAME=firmware
-REQUIRE_IMAGE_METADATA=1
-
-RAMFS_COPY_BIN='fw_printenv fw_setenv head'
-RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
-
-xiaomi_initramfs_prepare() {
- # Wipe UBI if running initramfs
- [ "$(rootfs_type)" = "tmpfs" ] || return 0
-
- local rootfs_mtdnum="$( find_mtd_index rootfs )"
- if [ ! "$rootfs_mtdnum" ]; then
- echo "unable to find mtd partition rootfs"
- return 1
- fi
-
- local kern_mtdnum="$( find_mtd_index ubi_kernel )"
- if [ ! "$kern_mtdnum" ]; then
- echo "unable to find mtd partition ubi_kernel"
- return 1
- fi
-
- ubidetach -m "$rootfs_mtdnum"
- ubiformat /dev/mtd$rootfs_mtdnum -y
-
- ubidetach -m "$kern_mtdnum"
- ubiformat /dev/mtd$kern_mtdnum -y
-}
-
-platform_check_image() {
- return 0;
-}
-
-platform_pre_upgrade() {
- case "$(board_name)" in
- redmi,ax6|\
- xiaomi,ax3600|\
- xiaomi,ax9000)
- xiaomi_initramfs_prepare
- ;;
- esac
-}
-
-platform_do_upgrade() {
- case "$(board_name)" in
- buffalo,wxr-5950ax12)
- CI_KERN_UBIPART="rootfs"
- CI_ROOT_UBIPART="user_property"
- buffalo_upgrade_prepare
- nand_do_flash_file "$1" || nand_do_upgrade_failed
- nand_do_restore_config || nand_do_upgrade_failed
- buffalo_upgrade_optvol
- ;;
- dynalink,dl-wrx36)
- nand_do_upgrade "$1"
- ;;
- edgecore,eap102)
- active="$(fw_printenv -n active)"
- if [ "$active" -eq "1" ]; then
- CI_UBIPART="rootfs2"
- else
- CI_UBIPART="rootfs1"
- fi
- # force altbootcmd which handles partition change in u-boot
- fw_setenv bootcount 3
- fw_setenv upgrade_available 1
- nand_do_upgrade "$1"
- ;;
- edimax,cax1800|\
- netgear,wax218)
- nand_do_upgrade "$1"
- ;;
- prpl,haze|\
- qnap,301w)
- kernelname="0:HLOS"
- rootfsname="rootfs"
- mmc_do_upgrade "$1"
- ;;
- zyxel,nbg7815)
- local config_mtdnum="$(find_mtd_index 0:bootconfig)"
- [ -z "$config_mtdnum" ] && reboot
- part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)"
- if [ "$part_num" -eq "0" ]; then
- kernelname="0:HLOS"
- rootfsname="rootfs"
- mmc_do_upgrade "$1"
- else
- kernelname="0:HLOS_1"
- rootfsname="rootfs_1"
- mmc_do_upgrade "$1"
- fi
- ;;
- redmi,ax6|\
- xiaomi,ax3600|\
- xiaomi,ax9000)
- # Make sure that UART is enabled
- fw_setenv boot_wait on
- fw_setenv uart_en 1
-
- # Enforce single partition.
- fw_setenv flag_boot_rootfs 0
- fw_setenv flag_last_success 0
- fw_setenv flag_boot_success 1
- fw_setenv flag_try_sys1_failed 8
- fw_setenv flag_try_sys2_failed 8
-
- # Kernel and rootfs are placed in 2 different UBI
- CI_KERN_UBIPART="ubi_kernel"
- CI_ROOT_UBIPART="rootfs"
- nand_do_upgrade "$1"
- ;;
- *)
- default_do_upgrade "$1"
- ;;
- esac
-}
diff --git a/target/linux/ipq807x/config-5.15 b/target/linux/ipq807x/config-5.15
deleted file mode 100644
index a3d0628be9..0000000000
--- a/target/linux/ipq807x/config-5.15
+++ /dev/null
@@ -1,509 +0,0 @@
-CONFIG_64BIT=y
-# CONFIG_APQ_GCC_8084 is not set
-# CONFIG_APQ_MMCC_8084 is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_ERRATUM_1165522=y
-CONFIG_ARM64_ERRATUM_1286807=y
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_PTR_AUTH_KERNEL=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_MHU_V2 is not set
-CONFIG_ARM_PSCI_CPUIDLE=y
-CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
-CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_PM=y
-CONFIG_CAVIUM_TX2_ERRATUM_219=y
-CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_QCOM=y
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_COREDUMP=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_THERMAL=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CRC16=y
-CONFIG_CRC8=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_QCE=y
-CONFIG_CRYPTO_DEV_QCE_AEAD=y
-# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
-CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
-# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
-# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
-CONFIG_CRYPTO_DEV_QCE_SHA=y
-CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
-CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
-CONFIG_CRYPTO_DEV_QCOM_RNG=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEV_COREDUMP=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FUJITSU_ERRATUM_010001=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-# CONFIG_I2C_QCOM_CCI is not set
-CONFIG_I2C_QUP=y
-CONFIG_IIO=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IPQ_APSS_6018=y
-CONFIG_IPQ_APSS_PLL=y
-# CONFIG_IPQ_GCC_4019 is not set
-# CONFIG_IPQ_GCC_6018 is not set
-# CONFIG_IPQ_GCC_806X is not set
-CONFIG_IPQ_GCC_8074=y
-# CONFIG_IPQ_LCC_806X is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KPSS_XCC is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_IPQ4019=y
-# CONFIG_MDM_GCC_9615 is not set
-# CONFIG_MDM_LCC_9615 is not set
-CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_HI6421_SPMI is not set
-# CONFIG_MFD_QCOM_RPM is not set
-CONFIG_MFD_SPMI_PMIC=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_MSM=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MSM_GCC_8660 is not set
-# CONFIG_MSM_GCC_8916 is not set
-# CONFIG_MSM_GCC_8939 is not set
-# CONFIG_MSM_GCC_8960 is not set
-# CONFIG_MSM_GCC_8974 is not set
-# CONFIG_MSM_GCC_8994 is not set
-# CONFIG_MSM_GCC_8996 is not set
-# CONFIG_MSM_GCC_8998 is not set
-# CONFIG_MSM_GPUCC_8998 is not set
-# CONFIG_MSM_LCC_8960 is not set
-# CONFIG_MSM_MMCC_8960 is not set
-# CONFIG_MSM_MMCC_8974 is not set
-# CONFIG_MSM_MMCC_8996 is not set
-# CONFIG_MSM_MMCC_8998 is not set
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_QCOM=y
-CONFIG_MTD_QCOMSMEM_PARTS=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
-CONFIG_NVMEM=y
-CONFIG_NVMEM_QCOM_QFPROM=y
-# CONFIG_NVMEM_SPMI_SDAM is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_NVMEM_U_BOOT_ENV=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-CONFIG_PCIE_PME=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-# CONFIG_PHY_QCOM_APQ8064_SATA is not set
-# CONFIG_PHY_QCOM_IPQ4019_USB is not set
-# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
-# CONFIG_PHY_QCOM_IPQ806X_USB is not set
-# CONFIG_PHY_QCOM_PCIE2 is not set
-CONFIG_PHY_QCOM_QMP=y
-CONFIG_PHY_QCOM_QUSB2=y
-# CONFIG_PHY_QCOM_USB_HS_28NM is not set
-# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
-# CONFIG_PHY_QCOM_USB_SS is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_APQ8064 is not set
-# CONFIG_PINCTRL_APQ8084 is not set
-# CONFIG_PINCTRL_IPQ4019 is not set
-# CONFIG_PINCTRL_IPQ6018 is not set
-# CONFIG_PINCTRL_IPQ8064 is not set
-CONFIG_PINCTRL_IPQ8074=y
-# CONFIG_PINCTRL_MDM9615 is not set
-CONFIG_PINCTRL_MSM=y
-# CONFIG_PINCTRL_MSM8226 is not set
-# CONFIG_PINCTRL_MSM8660 is not set
-# CONFIG_PINCTRL_MSM8916 is not set
-# CONFIG_PINCTRL_MSM8960 is not set
-# CONFIG_PINCTRL_MSM8976 is not set
-# CONFIG_PINCTRL_MSM8994 is not set
-# CONFIG_PINCTRL_MSM8996 is not set
-# CONFIG_PINCTRL_MSM8998 is not set
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
-# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
-# CONFIG_PINCTRL_QCS404 is not set
-# CONFIG_PINCTRL_SC7180 is not set
-# CONFIG_PINCTRL_SDM660 is not set
-# CONFIG_PINCTRL_SDM845 is not set
-# CONFIG_PINCTRL_SM8150 is not set
-# CONFIG_PINCTRL_SM8250 is not set
-CONFIG_PM=y
-# CONFIG_PM8916_WATCHDOG is not set
-CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-# CONFIG_POWER_RESET_MSM is not set
-# CONFIG_POWER_RESET_QCOM_PON is not set
-CONFIG_POWER_SUPPLY=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-# CONFIG_QCOM_A53PLL is not set
-# CONFIG_QCOM_AOSS_QMP is not set
-CONFIG_QCOM_APCS_IPC=y
-CONFIG_QCOM_APM=y
-# CONFIG_QCOM_APR is not set
-CONFIG_QCOM_BAM_DMA=y
-# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
-# CONFIG_QCOM_CLK_APCS_MSM8916 is not set
-# CONFIG_QCOM_CLK_APCS_SDX55 is not set
-# CONFIG_QCOM_COINCELL is not set
-# CONFIG_QCOM_COMMAND_DB is not set
-# CONFIG_QCOM_CPR is not set
-# CONFIG_QCOM_EBI2 is not set
-# CONFIG_QCOM_FASTRPC is not set
-CONFIG_QCOM_GDSC=y
-# CONFIG_QCOM_GENI_SE is not set
-# CONFIG_QCOM_GSBI is not set
-# CONFIG_QCOM_HFPLL is not set
-# CONFIG_QCOM_IPCC is not set
-# CONFIG_QCOM_LLCC is not set
-CONFIG_QCOM_MDT_LOADER=y
-# CONFIG_QCOM_OCMEM is not set
-# CONFIG_QCOM_PDC is not set
-CONFIG_QCOM_PIL_INFO=y
-# CONFIG_QCOM_Q6V5_ADSP is not set
-CONFIG_QCOM_Q6V5_COMMON=y
-# CONFIG_QCOM_Q6V5_MSS is not set
-# CONFIG_QCOM_Q6V5_PAS is not set
-CONFIG_QCOM_Q6V5_WCSS=y
-# CONFIG_QCOM_RMTFS_MEM is not set
-# CONFIG_QCOM_RPMH is not set
-CONFIG_QCOM_RPROC_COMMON=y
-CONFIG_QCOM_SCM=y
-# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
-# CONFIG_QCOM_SMD_RPM is not set
-CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_SMEM_STATE=y
-CONFIG_QCOM_SMP2P=y
-# CONFIG_QCOM_SMSM is not set
-CONFIG_QCOM_SOCINFO=y
-CONFIG_QCOM_SPMI_ADC5=y
-# CONFIG_QCOM_SYSMON is not set
-CONFIG_QCOM_TSENS=y
-CONFIG_QCOM_VADC_COMMON=y
-# CONFIG_QCOM_WCNSS_CTRL is not set
-# CONFIG_QCOM_WCNSS_PIL is not set
-CONFIG_QCOM_WDT=y
-# CONFIG_QCS_GCC_404 is not set
-# CONFIG_QCS_Q6SSTOP_404 is not set
-# CONFIG_QCS_TURING_404 is not set
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPMI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_CPR3=y
-# CONFIG_REGULATOR_CPR3_NPU is not set
-CONFIG_REGULATOR_CPR4_APSS=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_QCOM_LABIBB is not set
-CONFIG_REGULATOR_QCOM_SPMI=y
-# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
-# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set
-CONFIG_RELOCATABLE=y
-CONFIG_REMOTEPROC=y
-CONFIG_REMOTEPROC_CDEV=y
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_RESET_QCOM_AOSS is not set
-# CONFIG_RESET_QCOM_PDC is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPMSG=y
-CONFIG_RPMSG_CHAR=y
-# CONFIG_RPMSG_NS is not set
-CONFIG_RPMSG_QCOM_GLINK=y
-CONFIG_RPMSG_QCOM_GLINK_RPM=y
-CONFIG_RPMSG_QCOM_GLINK_SMEM=y
-CONFIG_RPMSG_QCOM_SMD=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PM8XXX=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SCHED_CORE is not set
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_THERMAL_PRESSURE=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-# CONFIG_SC_DISPCC_7180 is not set
-# CONFIG_SC_GCC_7180 is not set
-# CONFIG_SC_GPUCC_7180 is not set
-# CONFIG_SC_LPASS_CORECC_7180 is not set
-# CONFIG_SC_MSS_7180 is not set
-# CONFIG_SC_VIDEOCC_7180 is not set
-# CONFIG_SDM_CAMCC_845 is not set
-# CONFIG_SDM_DISPCC_845 is not set
-# CONFIG_SDM_GCC_660 is not set
-# CONFIG_SDM_GCC_845 is not set
-# CONFIG_SDM_GPUCC_845 is not set
-# CONFIG_SDM_LPASSCC_845 is not set
-# CONFIG_SDM_VIDEOCC_845 is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-# CONFIG_SM_GCC_8150 is not set
-# CONFIG_SM_GCC_8250 is not set
-# CONFIG_SM_GPUCC_8150 is not set
-# CONFIG_SM_GPUCC_8250 is not set
-# CONFIG_SM_VIDEOCC_8150 is not set
-# CONFIG_SM_VIDEOCC_8250 is not set
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_QUP=y
-CONFIG_SPMI=y
-# CONFIG_SPMI_HISI3670 is not set
-CONFIG_SPMI_MSM_PMIC_ARB=y
-# CONFIG_SPMI_PMIC_CLKDIV is not set
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VIRTIO=y
-# CONFIG_VIRTIO_BLK is not set
-# CONFIG_VIRTIO_NET is not set
-CONFIG_VMAP_STACK=y
-CONFIG_WANT_DEV_COREDUMP=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WATCHDOG_SYSFS=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8070-cax1800.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8070-cax1800.dts
deleted file mode 100644
index 2c9cbd5b3c..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8070-cax1800.dts
+++ /dev/null
@@ -1,322 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2021, Dirk Buchwalder <buchwalder@posteo.de> */
-
-/dts-v1/;
-
-#include "ipq8074-512m.dtsi"
-#include "ipq8074-ac-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Edimax CAX1800";
- compatible = "edimax,cax1800", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- led-boot = &led_system_red;
- led-failsafe = &led_system_red;
- led-running = &led_system_green;
- led-upgrade = &led_system_red;
- /* Aliases as required by u-boot to patch MAC addresses */
- ethernet0 = &dp5;
- label-mac-device = &dp5;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs-append = " root=/dev/ubiblock0_1";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system_red: system-red {
- label = "red:system";
- gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_green: system-green {
- label = "green:system";
- gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_blue: system-blue {
- label = "blue:system";
- gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-pins {
- mdc {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&qpic_nand {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <8>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "rootfs";
- reg = <0x0000000 0x3400000>;
- };
- };
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-select = <0>;
- status = "ok";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- use-default-sizes;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:sbl1";
- reg = <0x0 0x50000>;
- read-only;
- };
-
- partition@50000 {
- label = "0:mibib";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:bootconfig";
- reg = <0x60000 0x20000>;
- read-only;
- };
-
- partition@80000 {
- label = "0:bootconfig1";
- reg = <0x80000 0x20000>;
- read-only;
- };
-
- partition@a0000 {
- label = "0:qsee";
- reg = <0xa0000 0x180000>;
- read-only;
- };
-
- partition@220000 {
- label = "0:qsee_1";
- reg = <0x220000 0x180000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "0:devcfg";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- label = "0:devcfg_1";
- reg = <0x3b0000 0x10000>;
- read-only;
- };
-
- partition@3c0000 {
- label = "0:apdp";
- reg = <0x3c0000 0x10000>;
- read-only;
- };
-
- partition@3d0000 {
- label = "0:apdp_1";
- reg = <0x3d0000 0x10000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "0:rpm";
- reg = <0x3e0000 0x40000>;
- read-only;
- };
-
- partition@420000 {
- label = "0:rpm_1";
- reg = <0x420000 0x40000>;
- read-only;
- };
-
- partition@460000 {
- label = "0:cdt";
- reg = <0x460000 0x10000>;
- read-only;
- };
-
- partition@470000 {
- label = "0:cdt_1";
- reg = <0x470000 0x10000>;
- read-only;
- };
-
- partition@480000 {
- label = "0:appsblenv";
- reg = <0x480000 0x10000>;
- };
-
- partition@490000 {
- label = "0:appsbl";
- reg = <0x490000 0xa0000>;
- read-only;
- };
-
- partition@530000 {
- label = "0:appsbl_1";
- reg = <0x530000 0xa0000>;
- read-only;
- };
-
- partition@5d0000 {
- label = "0:art";
- reg = <0x5d0000 0x40000>;
- read-only;
- };
-
- partition@610000 {
- label = "0:ethphyfw";
- reg = <0x610000 0x80000>;
- read-only;
- };
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
-
- qca8075: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <4>;
- };
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>; /* cpu port bitmap */
- switch_lan_bmp = <0x1e>; /* lan port bitmap */
- switch_wan_bmp = <0x20>; /* wan port bitmap */
- switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
- switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
- switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
- bm_tick_mode = <0>; /* bm tick mode */
- tm_tick_mode = <0>; /* tm tick mode */
-
- qcom,port_phyinfo {
- port@0 {
- port_id = <1>;
- phy_address = <0>;
- };
- port@1 {
- port_id = <2>;
- phy_address = <1>;
- };
- port@2 {
- port_id = <3>;
- phy_address = <2>;
- };
- port@3 {
- port_id = <4>;
- phy_address = <3>;
- };
- port@4 {
- port_id = <5>;
- phy_address = <4>;
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&dp5 {
- status = "okay";
- phy-handle = <&qca8075>;
- label = "lan";
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "Edimax-CAX1800";
- qcom,ath11k-fw-memory-mode = <1>;
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts
deleted file mode 100644
index f3e82e2251..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
-
-/dts-v1/;
-
-#include "ipq8071-ax3600.dtsi"
-
-/ {
- model = "Xiaomi AX3600";
- compatible = "xiaomi,ax3600", "qcom,ipq8074";
-
- leds {
- compatible = "gpio-leds";
-
- led_system_blue: system-blue {
- label = "blue:system";
- gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_yellow: system-yellow {
- label = "yellow:system";
- gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
- };
-
- network-yellow {
- label = "yellow:network";
- gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
- };
-
- network-blue {
- label = "blue:network";
- gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
- };
-
- aiot {
- label = "blue:aiot";
- gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
- };
-};
-
-&pcie_qmp0 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi0: wifi@1,0 {
- status = "okay";
-
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
-
- qcom,ath10k-calibration-variant = "Xiaomi-AX3600";
- nvmem-cell-names = "calibration";
- nvmem-cells = <&caldata_qca9889>;
- };
- };
-};
-
-&wifi {
- qcom,ath11k-calibration-variant = "Xiaomi-AX3600";
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi
deleted file mode 100644
index c18cef52f3..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
-
-#include "ipq8074-512m.dtsi"
-#include "ipq8074-ac-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- aliases {
- serial0 = &blsp1_uart5;
- led-boot = &led_system_yellow;
- led-failsafe = &led_system_yellow;
- led-running = &led_system_blue;
- led-upgrade = &led_system_yellow;
- label-mac-device = &dp2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs-append = " root=/dev/ubiblock0_0";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-pins {
- mdc {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&qpic_nand {
- status = "okay";
-
- /*
- * Bootloader will find the NAND DT node by the compatible and
- * then "fixup" it by adding the partitions from the SMEM table
- * using the legacy bindings thus making it impossible for us
- * to change the partition table or utilize NVMEM for calibration.
- * So add a dummy partitions node that bootloader will populate
- * and set it as disabled so the kernel ignores it instead of
- * printing warnings due to the broken way bootloader adds the
- * partitions.
- */
- partitions {
- status = "disabled";
- };
-
- nand@0 {
- reg = <0>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <8>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:sbl1";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "0:mibib";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "0:qsee";
- reg = <0x200000 0x300000>;
- read-only;
- };
-
- partition@500000 {
- label = "0:devcfg";
- reg = <0x500000 0x80000>;
- read-only;
- };
-
- partition@580000 {
- label = "0:rpm";
- reg = <0x580000 0x80000>;
- read-only;
- };
-
- partition@600000 {
- label = "0:cdt";
- reg = <0x600000 0x80000>;
- read-only;
- };
-
- partition@680000 {
- label = "0:appsblenv";
- reg = <0x680000 0x80000>;
- };
-
- partition@700000 {
- label = "0:appsbl";
- reg = <0x700000 0x100000>;
- read-only;
- };
-
- partition@800000 {
- label = "0:art";
- reg = <0x800000 0x80000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_dp2: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- macaddr_dp3: macaddr@c {
- reg = <0xc 0x6>;
- };
-
- macaddr_dp4: macaddr@12 {
- reg = <0x12 0x6>;
- };
-
- macaddr_dp5: macaddr@18 {
- reg = <0x18 0x6>;
- };
-
- caldata_qca9889: caldata@4d000 {
- reg = <0x33000 0x844>;
- };
- };
-
- partition@880000 {
- label = "bdata";
- reg = <0x880000 0x80000>;
- };
-
- partition@900000 {
- /* This is crash + crash_syslog parts combined */
- label = "pstore";
- reg = <0x900000 0x100000>;
- };
-
- /* Make the first rootfs a dedicated ubi partition for kernel */
- partition@a00000 {
- label = "ubi_kernel";
- reg = <0xa00000 0x23c0000>;
- };
-
- /* Place the real rootfs in the original second rootfs and
- * expand it to the end of the nand
- */
- rootfs: partition@2dc0000 {
- label = "rootfs";
- reg = <0x2dc0000 0xd240000>;
- };
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
-
- qca8075_1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-
- qca8075_2: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- };
-
- qca8075_3: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <3>;
- };
-
- qca8075_4: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <4>;
- };
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>; /* cpu port bitmap */
- switch_lan_bmp = <0x1e>; /* lan port bitmap */
- switch_wan_bmp = <0x20>; /* wan port bitmap */
- switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
- switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
- switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
- bm_tick_mode = <0>; /* bm tick mode */
- tm_tick_mode = <0>; /* tm tick mode */
-
- qcom,port_phyinfo {
- port@0 {
- port_id = <1>;
- phy_address = <0>;
- };
- port@1 {
- port_id = <2>;
- phy_address = <1>;
- };
- port@2 {
- port_id = <3>;
- phy_address = <2>;
- };
- port@3 {
- port_id = <4>;
- phy_address = <3>;
- };
- port@4 {
- port_id = <5>;
- phy_address = <4>;
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&dp2 {
- status = "okay";
- phy-handle = <&qca8075_1>;
- label = "wan";
- nvmem-cells = <&macaddr_dp2>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp3 {
- status = "okay";
- phy-handle = <&qca8075_2>;
- label = "lan1";
- nvmem-cells = <&macaddr_dp3>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp4 {
- status = "okay";
- phy-handle = <&qca8075_3>;
- label = "lan2";
- nvmem-cells = <&macaddr_dp4>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp5 {
- status = "okay";
- phy-handle = <&qca8075_4>;
- label = "lan3";
- nvmem-cells = <&macaddr_dp5>;
- nvmem-cell-names = "mac-address";
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-fw-memory-mode = <1>;
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax6.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax6.dts
deleted file mode 100644
index 6611a8fe27..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax6.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2021, Zhijun You <hujy652@gmail.com> */
-
-/dts-v1/;
-
-#include "ipq8071-ax3600.dtsi"
-
-/ {
- model = "Redmi AX6";
- compatible = "redmi,ax6", "qcom,ipq8074";
-
- leds {
- compatible = "gpio-leds";
-
- led_system_blue: system-blue {
- label = "blue:system";
- gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_yellow: system-yellow {
- label = "yellow:system";
- gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
- };
-
- network-blue {
- label = "blue:network";
- gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
- };
-
- network-yellow {
- label = "yellow:network";
- gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-/* AX6 can both have NAND of 256MiB or 128MiB.
- * To be on the safe side, assume 128MiB of NAND.
- */
-&rootfs {
- reg = <0x2dc0000 0x5220000>;
-};
-
-&wifi {
- qcom,ath11k-calibration-variant = "Redmi-AX6";
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
deleted file mode 100644
index 357b6368d9..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
+++ /dev/null
@@ -1,389 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2022, Matthew Hagan <mnhagan88@gmail.com> */
-
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-ac-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Edgecore EAP102";
- compatible = "edgecore,eap102", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- serial1 = &blsp1_uart3;
- led-boot = &led_system_green;
- led-failsafe = &led_system_green;
- led-running = &led_system_green;
- led-upgrade = &led_system_green;
- /* Aliases as required by u-boot to patch MAC addresses */
- ethernet0 = &dp5;
- ethernet1 = &dp6;
- label-mac-device = &dp5;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs-append = " root=/dev/ubiblock0_1";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&tlmm 66 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wanpoe {
- label = "green:wanpoe";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- };
-
- led_wlan2g {
- label = "green:wlan2g";
- gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1radio";
- };
-
- led_wlan5g {
- label = "green:wlan5g";
- gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0radio";
- };
-
- led_system_green: led_system {
- label = "green:power";
- gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-pins {
- mdc {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-
- button_pins: button_pins {
- reset_button {
- pins = "gpio66";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:sbl1";
- reg = <0x0 0x50000>;
- read-only;
- };
-
- partition@50000 {
- label = "0:mibib";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:bootconfig";
- reg = <0x60000 0x20000>;
- read-only;
- };
-
- partition@80000 {
- label = "0:bootconfig1";
- reg = <0x80000 0x20000>;
- read-only;
- };
-
- partition@a0000 {
- label = "0:qsee";
- reg = <0xa0000 0x180000>;
- read-only;
- };
-
- partition@220000 {
- label = "0:qsee_1";
- reg = <0x220000 0x180000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "0:devcfg";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- label = "0:devcfg_1";
- reg = <0x3b0000 0x10000>;
- read-only;
- };
-
- partition@3c0000 {
- label = "0:apdp";
- reg = <0x3c0000 0x10000>;
- read-only;
- };
-
- partition@3d0000 {
- label = "0:apdp_1";
- reg = <0x3d0000 0x10000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "0:rpm";
- reg = <0x3e0000 0x40000>;
- read-only;
- };
-
- partition@420000 {
- label = "0:rpm_1";
- reg = <0x420000 0x40000>;
- read-only;
- };
-
- partition@460000 {
- label = "0:cdt";
- reg = <0x460000 0x10000>;
- read-only;
- };
-
- partition@470000 {
- label = "0:cdt_1";
- reg = <0x470000 0x10000>;
- read-only;
- };
-
- partition@480000 {
- label = "0:appsblenv";
- reg = <0x480000 0x10000>;
- };
-
- partition@490000 {
- label = "0:appsbl";
- reg = <0x490000 0xc0000>;
- read-only;
- };
-
- partition@550000 {
- label = "0:appsbl_1";
- reg = <0x530000 0xc0000>;
- read-only;
- };
-
- partition@610000 {
- label = "0:art";
- reg = <0x610000 0x40000>;
- read-only;
- };
-
- partition@650000 {
- label = "0:ethphyfw";
- reg = <0x650000 0x80000>;
- read-only;
- };
-
- partition@6d0000 {
- label = "0:product_info";
- reg = <0x6d0000 0x80000>;
- read-only;
- };
-
- partition@750000 {
- label = "priv_data1";
- reg = <0x750000 0x10000>;
- read-only;
- };
-
- partition@760000 {
- label = "priv_data2";
- reg = <0x760000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart3 {
- status = "okay";
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&qusb_phy_0 {
- status = "okay";
-};
-
-&ssphy_0 {
- status = "okay";
-};
-
-&usb_0 {
- status = "okay";
-};
-
-&qpic_nand {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <8>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "rootfs1";
- reg = <0x0000000 0x3400000>;
- };
-
- partition@3400000 {
- label = "0:wififw";
- reg = <0x3400000 0x800000>;
- read-only;
- };
-
- partition@3c00000 {
- label = "rootfs2";
- reg = <0x3c00000 0x3400000>;
- };
-
- partition@7000000 {
- label = "0:wififw_1";
- reg = <0x7000000 0x800000>;
- read-only;
- };
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- qca8081_24: ethernet-phy@24 {
- compatible = "ethernet-phy-id004d.d101";
- reg = <24>;
- reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
- };
-
- qca8081_28: ethernet-phy@28 {
- compatible = "ethernet-phy-id004d.d101";
- reg = <28>;
- reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
- };
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>; /* cpu port bitmap */
- switch_lan_bmp = <0x3e>; /* lan port bitmap */
- switch_wan_bmp = <0x40>; /* wan port bitmap */
- switch_mac_mode = <0xff>; /* mac mode for uniphy instance0*/
- switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
- switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
- bm_tick_mode = <0>; /* bm tick mode */
- tm_tick_mode = <0>; /* tm tick mode */
-
- qcom,port_phyinfo {
- port@4 {
- port_id = <5>;
- phy_address = <24>;
- port_mac_sel = "QGMAC_PORT";
- };
- port@5 {
- port_id = <6>;
- phy_address = <28>;
- port_mac_sel = "QGMAC_PORT";
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&dp5 {
- status = "okay";
- phy-handle = <&qca8081_28>;
- label = "wan";
-};
-
-&dp6 {
- status = "okay";
- phy-handle = <&qca8081_24>;
- label = "lan";
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "Edgecore-EAP102";
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
deleted file mode 100644
index 5521a480b8..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
+++ /dev/null
@@ -1,410 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2021, Dirk Buchwalder <buchwalder@posteo.de> */
-
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "QNAP 301w";
- compatible = "qnap,301w", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- /*
- * Aliases as required by u-boot
- * to patch MAC addresses
- */
- led-boot = &led_system_red;
- led-failsafe = &led_system_red;
- led-running = &led_pwr_green;
- led-upgrade = &led_system_red;
- ethernet0 = &dp1;
- ethernet1 = &dp2;
- ethernet2 = &dp3;
- ethernet3 = &dp4;
- ethernet4 = &dp5;
- ethernet5 = &dp6_syn;
- label-mac-device = &dp1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wps-button {
- label = "wps";
- gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset-button {
- label = "reset";
- gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&leds_pins>;
- pinctrl-names = "default";
-
- led_system_green: led-system-green {
- label = "green:system";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led_system_red: led-system-red {
- label = "red:system";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led_pwr_green: led-pwr-green {
- label = "green:pwr";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-wifi-green {
- label = "green:wifi";
- gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-lan4-green {
- label = "green:lan4";
- gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-lan4-amber {
- label = "amber:lan4";
- gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- };
-
- led-lan3-green {
- label = "green:lan3";
- gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-lan3-amber {
- label = "amber:lan3";
- gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- };
-
- led-lan2-green {
- label = "green:lan2";
- gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-lan2-amber {
- label = "amber:lan2";
- gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- };
-
- led-lan1-green {
- label = "green:lan1";
- gpios = <&tlmm 14 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-lan1-amber {
- label = "amber:lan1";
- gpios = <&tlmm 15 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- };
-
- led-10g-1-green {
- label = "green:10g_1";
- gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-10g-1-amber {
- label = "amber:10g_1";
- gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- };
-
- led-10g-2-green {
- label = "green:10g_2";
- gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-10g-2-amber {
- label = "amber:10g_2";
- gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- };
- };
-};
-
-&tlmm {
-
- mdio_pins: mdio-state {
- mdc-pins {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio-pins {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-
- button_pins: button-state {
- wps-pins {
- pins = "gpio57";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- rst-pins {
- pins = "gpio67";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-
- leds_pins: leds-state {
- pins = "gpio1", "gpio3", "gpio4", "gpio6", "gpio7", "gpio8",
- "gpio11", "gpio12", "gpio13", "gpio14", "gpio15", "gpio42",
- "gpio51", "gpio52", "gpio54", "gpio56";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-down;
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&ssphy_0 {
- status = "okay";
-};
-
-&qusb_phy_0 {
- status = "okay";
-};
-
-&ssphy_1 {
- status = "okay";
-};
-
-&qusb_phy_1 {
- status = "okay";
-};
-
-&usb_0 {
- status = "okay";
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <0>;
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
-
- aqr113c_0: ethernet-phy@0 {
- compatible ="ethernet-phy-ieee802.3-c45";
- reg = <0>;
- reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- };
-
- aqr113c_8: ethernet-phy@8 {
- compatible ="ethernet-phy-ieee802.3-c45";
- reg = <8>;
- reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
- };
-
- qca8075_16: ethernet-phy@16 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <16>;
- };
-
- qca8075_17: ethernet-phy@17 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <17>;
- };
-
- qca8075_18: ethernet-phy@18 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <18>;
- };
-
- qca8075_19: ethernet-phy@19 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <19>;
- };
-};
-
-&sdhc_1 {
- status = "okay";
-
- /* According to the stock dts from the QNAP gpl drop
- * the emmc has a problem with the hs400 > hs200 speed switch.
- * Therefore remove the mmc-hs400-1_8v property
- */
- /delete-property/ mmc-hs400-1_8v;
- mmc-hs200-1_8v;
- mmc-ddr-1_8v;
- vqmmc-supply = <&l11>;
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>; /* cpu port bitmap */
- switch_lan_bmp = <0x3e>; /* lan port bitmap */
- switch_wan_bmp = <0xc0>; /* wan port bitmap */
- switch_mac_mode = <0xb>; /* mac mode for uniphy instance0*/
- switch_mac_mode1 = <0xd>; /* mac mode for uniphy instance1*/
- switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
- bm_tick_mode = <0>; /* bm tick mode */
- tm_tick_mode = <0>; /* tm tick mode */
-
- qcom,port_phyinfo {
- port@0 {
- port_id = <1>;
- phy_address = <16>;
- };
- port@1 {
- port_id = <2>;
- phy_address = <17>;
- };
- port@2 {
- port_id = <3>;
- phy_address = <18>;
- };
- port@3 {
- port_id = <4>;
- phy_address = <19>;
- };
- port@4 {
- port_id = <5>;
- phy_address = <8>;
- compatible = "ethernet-phy-ieee802.3-c45";
- ethernet-phy-ieee802.3-c45;
- };
- port@5 {
- port_id = <6>;
- phy_address = <0>;
- compatible = "ethernet-phy-ieee802.3-c45";
- ethernet-phy-ieee802.3-c45;
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&dp1 {
- status = "okay";
- phy-handle = <&qca8075_16>;
- label = "lan4";
-};
-
-&dp2 {
- status = "okay";
- phy-handle = <&qca8075_17>;
- label = "lan3";
-};
-
-&dp3 {
- status = "okay";
- phy-handle = <&qca8075_18>;
- label = "lan2";
-};
-
-&dp4 {
- status = "okay";
- phy-handle = <&qca8075_19>;
- label = "lan1";
-};
-
-&dp5 {
- status = "okay";
- qcom,mactype = <1>;
- phy-handle = <&aqr113c_8>;
- label = "10g-1";
-};
-
-&dp6_syn {
- status = "okay";
- phy-handle = <&aqr113c_0>;
- label = "10g-2";
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "QNAP-301w";
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
deleted file mode 100644
index 801aa05604..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
+++ /dev/null
@@ -1,522 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
-
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Xiaomi AX9000";
- compatible = "xiaomi,ax9000", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- led-boot = &led_system_yellow;
- led-failsafe = &led_system_yellow;
- led-running = &led_system_blue;
- led-upgrade = &led_system_yellow;
- label-mac-device = &dp5;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs-append = " root=/dev/ubiblock0_0";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps"; /* Labeled Mesh on the device */
- gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system_blue: system-blue {
- label = "blue:system";
- gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led_system_yellow: system-yellow {
- label = "yellow:system";
- gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_YELLOW>;
- };
-
- network-yellow {
- label = "yellow:network";
- gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_YELLOW>;
- };
-
- network-blue {
- label = "blue:network";
- gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- top-red {
- label = "red:top";
- gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- default-state = "keep";
- };
-
- top-green {
- label = "green:top";
- gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- default-state = "keep";
- };
-
- top-blue {
- label = "blue:top";
- gpios = <&tlmm 66 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_BLUE>;
- default-state = "keep";
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-pins {
- mdc {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-
- i2c_pins: i2c-pins {
- pins = "gpio0", "gpio2";
- function = "blsp5_i2c";
- drive-strength = <8>;
- bias-disable;
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&blsp1_i2c6 {
- status = "okay";
-
- pinctrl-0 = <&i2c_pins>;
- pinctrl-names = "default";
-};
-
-&prng {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&qpic_nand {
- status = "okay";
-
- /*
- * Bootloader will find the NAND DT node by the compatible and
- * then "fixup" it by adding the partitions from the SMEM table
- * using the legacy bindings thus making it impossible for us
- * to change the partition table or utilize NVMEM for calibration.
- * So add a dummy partitions node that bootloader will populate
- * and set it as disabled so the kernel ignores it instead of
- * printing warnings due to the broken way bootloader adds the
- * partitions.
- */
- partitions {
- status = "disabled";
- };
-
- nand@0 {
- reg = <0>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <8>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:sbl1";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "0:mibib";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "0:bootconfig";
- reg = <0x200000 0x80000>;
- read-only;
- };
-
- partition@280000 {
- label = "0:bootconfig1";
- reg = <0x280000 0x80000>;
- read-only;
- };
-
- partition@300000 {
- label = "0:qsee";
- reg = <0x300000 0x300000>;
- read-only;
- };
-
- partition@600000 {
- label = "0:qsee_1";
- reg = <0x600000 0x300000>;
- read-only;
- };
-
- partition@900000 {
- label = "0:devcfg";
- reg = <0x900000 0x80000>;
- read-only;
- };
-
- partition@980000 {
- label = "0:devcfg_1";
- reg = <0x980000 0x80000>;
- read-only;
- };
-
- partition@a00000 {
- label = "0:apdp";
- reg = <0xa00000 0x80000>;
- read-only;
- };
-
- partition@a80000 {
- label = "0:apdp_1";
- reg = <0xa80000 0x80000>;
- read-only;
- };
-
- partition@b00000 {
- label = "0:rpm";
- reg = <0xb00000 0x80000>;
- read-only;
- };
-
- partition@b80000 {
- label = "0:rpm_1";
- reg = <0xb80000 0x80000>;
- read-only;
- };
-
- partition@c00000 {
- label = "0:cdt";
- reg = <0xc00000 0x80000>;
- read-only;
- };
-
- partition@c80000 {
- label = "0:cdt_1";
- reg = <0xc80000 0x80000>;
- read-only;
- };
-
- partition@d00000 {
- label = "0:appsblenv";
- reg = <0xd00000 0x80000>;
- };
-
- partition@d80000 {
- label = "0:appsbl";
- reg = <0xd80000 0x100000>;
- read-only;
- };
-
- partition@e80000 {
- label = "0:appsbl_1";
- reg = <0xe80000 0x100000>;
- read-only;
- };
-
- partition@f80000 {
- label = "0:art";
- reg = <0xf80000 0x80000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_dp1: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_dp2: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- macaddr_dp3: macaddr@c {
- reg = <0xc 0x6>;
- };
-
- macaddr_dp4: macaddr@12 {
- reg = <0x12 0x6>;
- };
-
- macaddr_dp5: macaddr@18 {
- reg = <0x18 0x6>;
- };
-
- caldata_qca9889: caldata@4d000 {
- reg = <0x4d000 0x844>;
- };
- };
-
- partition@1000000 {
- label = "bdata";
- reg = <0x1000000 0x80000>;
- };
-
- partition@1080000 {
- /* This is crash + crash_syslog parts combined */
- label = "pstore";
- reg = <0x1080000 0x100000>;
- };
-
- partition@1180000 {
- label = "ubi_kernel";
- reg = <0x1180000 0x3800000>;
- };
-
- partition@4980000 {
- label = "rootfs";
- reg = <0x4980000 0xb680000>;
- };
- };
- };
-};
-
-&qusb_phy_0 {
- status = "okay";
-};
-
-&ssphy_0 {
- status = "okay";
-};
-
-&usb_0 {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
-
- qca8075_0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- qca8075_1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-
- qca8075_2: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- };
-
- qca8075_3: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <3>;
- };
-
- qca8081: ethernet-phy@24 {
- compatible = "ethernet-phy-id004d.d101";
- reg = <24>;
- reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
- };
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>; /* cpu port bitmap */
- switch_lan_bmp = <0x1e>; /* lan port bitmap */
- switch_wan_bmp = <0x20>; /* wan port bitmap */
- switch_mac_mode = <0xb>; /* mac mode for uniphy instance0*/
- switch_mac_mode1 = <0xc>; /* mac mode for uniphy instance1*/
- switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
- bm_tick_mode = <0>; /* bm tick mode */
- tm_tick_mode = <0>; /* tm tick mode */
-
- qcom,port_phyinfo {
- port@0 {
- port_id = <1>;
- phy_address = <0>;
- };
- port@1 {
- port_id = <2>;
- phy_address = <1>;
- };
- port@2 {
- port_id = <3>;
- phy_address = <2>;
- };
- port@3 {
- port_id = <4>;
- phy_address = <3>;
- };
- port@4 {
- port_id = <5>;
- phy_address = <24>;
- port_mac_sel = "QGMAC_PORT";
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&dp1 {
- status = "okay";
- phy-handle = <&qca8075_0>;
- label = "lan4";
- nvmem-cells = <&macaddr_dp1>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp2 {
- status = "okay";
- phy-handle = <&qca8075_1>;
- label = "lan3";
- nvmem-cells = <&macaddr_dp2>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp3 {
- status = "okay";
- phy-handle = <&qca8075_2>;
- label = "lan2";
- nvmem-cells = <&macaddr_dp3>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp4 {
- status = "okay";
- phy-handle = <&qca8075_3>;
- label = "lan1";
- nvmem-cells = <&macaddr_dp4>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp5 {
- status = "okay";
- phy-handle = <&qca8081>;
- label = "wan";
- nvmem-cells = <&macaddr_dp5>;
- nvmem-cell-names = "mac-address";
-};
-
-&pcie_qmp0 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- status = "okay";
-
- /* ath11k has no DT compatible for PCI cards */
- compatible = "pci17cb,1104";
- reg = <0x00010000 0 0 0 0>;
-
- qcom,ath11k-calibration-variant = "Xiaomi-AX9000";
- };
- };
-};
-
-&pcie_qmp1 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-
- perst-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>;
-
- bridge@1,0 {
- reg = <0x00010000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- status = "okay";
-
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
-
- qcom,ath10k-calibration-variant = "Xiaomi-AX9000";
- nvmem-cell-names = "calibration";
- nvmem-cells = <&caldata_qca9889>;
- };
- };
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "Xiaomi-AX9000";
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
deleted file mode 100644
index 5468e9e1fb..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
+++ /dev/null
@@ -1,243 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2022, Robert Marko <robimarko@gmail.com> */
-
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Dynalink DL-WRX36";
- compatible = "dynalink,dl-wrx36", "qcom,ipq8074";
-
- aliases {
- led-boot = &led_system_red;
- led-failsafe = &led_system_red;
- led-running = &led_system_blue;
- led-upgrade = &led_system_red;
- serial0 = &blsp1_uart5;
- /* Aliases as required by u-boot to patch MAC addresses */
- ethernet0 = &dp6_syn;
- ethernet1 = &dp4;
- ethernet2 = &dp3;
- ethernet3 = &dp2;
- ethernet4 = &dp1;
- label-mac-device = &dp6_syn;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs-append = " root=/dev/ubiblock0_1";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system_blue: system-blue {
- label = "blue:system";
- gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led_system_red: system-red {
- label = "red:system";
- gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-pins {
- mdc {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&qpic_nand {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <8>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
-};
-
-&qusb_phy_0 {
- status = "okay";
-};
-
-&ssphy_0 {
- status = "okay";
-};
-
-&usb_0 {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
-
- qca8075_0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- qca8075_1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-
- qca8075_2: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- };
-
- qca8075_3: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <3>;
- };
-
- qca8081: ethernet-phy@28 {
- compatible = "ethernet-phy-id004d.d101";
- reg = <28>;
- reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
- };
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>; /* cpu port bitmap */
- switch_lan_bmp = <0x3e>; /* lan port bitmap */
- switch_wan_bmp = <0x40>; /* wan port bitmap */
- switch_mac_mode = <0xb>; /* mac mode for uniphy instance0*/
- switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
- switch_mac_mode2 = <0xc>; /* mac mode for uniphy instance2*/
- bm_tick_mode = <0>; /* bm tick mode */
- tm_tick_mode = <0>; /* tm tick mode */
-
- qcom,port_phyinfo {
- port@0 {
- port_id = <1>;
- phy_address = <0>;
- };
- port@1 {
- port_id = <2>;
- phy_address = <1>;
- };
- port@2 {
- port_id = <3>;
- phy_address = <2>;
- };
- port@3 {
- port_id = <4>;
- phy_address = <3>;
- };
- port@5 {
- port_id = <6>;
- phy_address = <28>;
- port_mac_sel = "QGMAC_PORT";
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&dp1 {
- status = "okay";
- phy-handle = <&qca8075_0>;
- label = "lan4";
-};
-
-&dp2 {
- status = "okay";
- phy-handle = <&qca8075_1>;
- label = "lan3";
-};
-
-&dp3 {
- status = "okay";
- phy-handle = <&qca8075_2>;
- label = "lan2";
-};
-
-&dp4 {
- status = "okay";
- phy-handle = <&qca8075_3>;
- label = "lan1";
-};
-
-&dp6_syn {
- status = "okay";
- phy-handle = <&qca8081>;
- label = "wan";
-};
-
-&wifi {
- status = "okay";
- qcom,ath11k-calibration-variant = "Dynalink-DL-WRX36";
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
deleted file mode 100644
index 8a5200b4eb..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
+++ /dev/null
@@ -1,308 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "prpl Foundation Haze";
- compatible = "prpl,haze", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- /* Aliases are required by U-Boot to patch MAC addresses */
- ethernet0 = &dp6_syn;
- ethernet1 = &dp4;
- ethernet2 = &dp3;
- ethernet3 = &dp2;
- label-mac-device = &dp6_syn;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wps-button {
- label = "wps";
- gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset-button {
- label = "reset";
- gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-state {
- mdc-pins {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio-pins {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-
- button_pins: button-state {
- wps-pins {
- pins = "gpio42";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- rst-pins {
- pins = "gpio44";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&ssphy_0 {
- status = "okay";
-};
-
-&qusb_phy_0 {
- status = "okay";
-};
-
-&ssphy_1 {
- status = "okay";
-};
-
-&qusb_phy_1 {
- status = "okay";
-};
-
-&usb_0 {
- status = "okay";
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <0>;
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
-
- qca8075_1: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- qca8075_2: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-
- qca8075_3: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- };
-
- qca8075_4: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <3>;
- };
-
- aqr113c: ethernet-phy@5 {
- compatible ="ethernet-phy-ieee802.3-c45";
- reg = <8>;
- reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
- };
-};
-
-&sdhc_1 {
- status = "okay";
-
- vqmmc-supply = <&l11>;
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>; /* cpu port bitmap */
- switch_lan_bmp = <0x1e>; /* lan port bitmap */
- switch_wan_bmp = <0x60>; /* wan port bitmap */
- switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
- switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1*/
- switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
- bm_tick_mode = <0>; /* bm tick mode */
- tm_tick_mode = <0>; /* tm tick mode */
-
- qcom,port_phyinfo {
- port@0 {
- port_id = <1>;
- phy_address = <0>;
- };
- port@1 {
- port_id = <2>;
- phy_address = <1>;
- };
- port@2 {
- port_id = <3>;
- phy_address = <2>;
- };
- port@3 {
- port_id = <4>;
- phy_address = <3>;
- };
- port@4 {
- port_id = <6>;
- phy_address = <8>;
- compatible = "ethernet-phy-ieee802.3-c45";
- ethernet-phy-ieee802.3-c45;
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-/* Dummy LAN port */
-&dp1 {
- status = "disabled";
- phy-handle = <&qca8075_1>;
- label = "lan4";
-};
-
-&dp2 {
- status = "okay";
- phy-handle = <&qca8075_2>;
- label = "lan3";
-};
-
-&dp3 {
- status = "okay";
- phy-handle = <&qca8075_3>;
- label = "lan2";
-};
-
-&dp4 {
- status = "okay";
- phy-handle = <&qca8075_4>;
- label = "lan1";
-};
-
-&dp6_syn {
- status = "okay";
- qcom,mactype = <1>;
- phy-handle = <&aqr113c>;
- label = "wan";
-};
-
-&pcie_qmp0 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00020000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- };
-};
-
-&pcie_qmp1 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-
- perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
-
- bridge@1,0 {
- reg = <0x00010000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- status = "okay";
-
- /* ath11k has no DT compatible for PCI cards */
- compatible = "pci17cb,1104";
- reg = <0x00010000 0 0 0 0>;
-
- qcom,ath11k-calibration-variant = "prpl-Haze";
- };
- };
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "prpl-Haze";
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-wax218.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-wax218.dts
deleted file mode 100644
index 5bfcdcc8ca..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-wax218.dts
+++ /dev/null
@@ -1,191 +0,0 @@
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Netgear WAX218";
- compatible = "netgear,wax218", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- led-boot = &led_power_amber;
- led-failsafe = &led_power_amber;
- led-running = &led_power_amber;
- led-upgrade = &led_power_amber;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- /*
- * Netgear's U-Boot adds "ubi.mtd=rootfs root=mtd:ubi_rootfs"
- * That fails to create a UBI block device, so add it here.
- */
- bootargs-append = " ubi.block=0,rootfs root=/dev/ubiblock0_1";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_amber: led_power {
- label = "amber:power";
- gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
- };
-
- led_lan {
- label = "blue:lan";
- gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
- };
-
- led_wlan_2g {
- label = "blue:wlan2g";
- gpios = <&led_gpio 3 GPIO_ACTIVE_HIGH>;
- };
-
- led_wlan_5g {
- label = "blue:wlan5g";
- gpios = <&led_gpio 4 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>;
- switch_lan_bmp = <0x3e>;
- switch_wan_bmp = <0x40>;
- switch_mac_mode = <0x00>;
- switch_mac_mode1 = <0xff>;
- switch_mac_mode2 = <0x0f>;
- bm_tick_mode = <0>;
- tm_tick_mode = <0>;
-
- qcom,port_phyinfo {
- port@5 {
- port_id = <6>;
- phy_address = <28>;
- port_mac_sel = "QGMAC_PORT";
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-pins {
- mdc {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
-
- qca8081_28: ethernet-phy@28 {
- reg = <28>;
- };
-};
-
-&dp6_syn {
- status = "okay";
- phy-handle = <&qca8081_28>;
- label = "lan";
- nvmem-cells = <&macaddr_ubootenv_ethaddr>;
- nvmem-cell-names = "mac-address";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&qpic_nand {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <8>;
-
- partitions {
- compatible = "qcom,smem-part";
-
- partition-0-appsblenv {
- compatible = "fixed-partitions";
- label = "0:appsblenv";
- read-only;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- compatible = "u-boot,env";
- label = "env-data";
- reg = <0x0 0x40000>;
-
- macaddr_ubootenv_ethaddr: ethaddr {};
- };
- };
- };
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "Netgear-WAX218";
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi
deleted file mode 100644
index dace4008b3..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include "ipq8074.dtsi"
-
-&tzapp_region {
- reg = <0x0 0x4a400000 0x0 0x100000>;
-};
-
-&q6_region {
- reg = <0x0 0x4b000000 0x0 0x3700000>;
-};
-
-&q6_etr_region {
- reg = <0x0 0x4e700000 0x0 0x100000>;
-};
-
-&m3_dump_region {
- reg = <0x0 0x4e800000 0x0 0x100000>;
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi
deleted file mode 100644
index dbc9baa2b9..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <dt-bindings/thermal/thermal.h>
-#include "ipq8074-cpr-regulator.dtsi"
-
-&CPU0 {
- cpu-supply = <&apc_vreg>;
- voltage-tolerance = <1>;
-};
-
-&CPU1 {
- cpu-supply = <&apc_vreg>;
- voltage-tolerance = <1>;
-};
-
-&CPU2 {
- cpu-supply = <&apc_vreg>;
- voltage-tolerance = <1>;
-};
-
-&CPU3 {
- cpu-supply = <&apc_vreg>;
- voltage-tolerance = <1>;
-};
-&cpu0_thermal {
- trips {
- cpu0_passive: cpu-passive {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu0_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu0_passive>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&cpu1_thermal {
- trips {
- cpu1_passive: cpu-passive {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu1_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu1_passive>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&cpu2_thermal {
- trips {
- cpu2_passive: cpu-passive {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu2_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu2_passive>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&cpu3_thermal {
- trips {
- cpu3_passive: cpu-passive {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu3_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu3_passive>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&cluster_thermal {
- trips {
- cluster_passive: cluster-passive {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cluster_crit: cluster_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cluster_passive>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi
deleted file mode 100644
index e351a2e759..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi
+++ /dev/null
@@ -1,228 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include "pmp8074.dtsi"
-
-&soc {
- apc_apm: apm@b111000 {
- compatible = "qcom,ipq807x-apm";
- reg = <0xb111000 0x1000>;
- reg-names = "pm-apcc-glb";
- qcom,apm-post-halt-delay = <0x2>;
- qcom,apm-halt-clk-delay = <0x11>;
- qcom,apm-resume-clk-delay = <0x10>;
- qcom,apm-sel-switch-delay = <0x01>;
- };
-
- apc_cpr: cpr4-ctrl@b018000 {
- compatible = "qcom,cpr4-ipq807x-apss-regulator";
- reg = <0xb018000 0x4000>, <0xa4000 0x1000>, <0x0193d008 0x4>;
- reg-names = "cpr_ctrl", "fuse_base", "cpr_tcsr_reg";
- interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "cpr";
- qcom,cpr-ctrl-name = "apc";
- qcom,cpr-sensor-time = <1000>;
- qcom,cpr-loop-time = <5000000>;
- qcom,cpr-idle-cycles = <15>;
- qcom,cpr-step-quot-init-min = <12>;
- qcom,cpr-step-quot-init-max = <14>;
- qcom,cpr-count-mode = <0>; /* All-at-once */
- qcom,cpr-count-repeat = <14>;
- qcom,cpr-down-error-step-limit = <1>;
- qcom,cpr-up-error-step-limit = <1>;
- qcom,apm-ctrl = <&apc_apm>;
- qcom,apm-threshold-voltage = <848000>;
- vdd-supply = <&s3>;
- qcom,voltage-step = <8000>;
-
- thread@0 {
- qcom,cpr-thread-id = <0>;
- qcom,cpr-consecutive-up = <0>;
- qcom,cpr-consecutive-down = <0>;
- qcom,cpr-up-threshold = <4>;
- qcom,cpr-down-threshold = <1>;
-
- apc_vreg: regulator {
- regulator-name = "apc_corner";
- regulator-min-microvolt = <1>;
- regulator-max-microvolt = <6>;
- qcom,cpr-part-types = <2>;
- qcom,cpr-parts-voltage = <1048000>;
- qcom,cpr-parts-voltage-v2 = <992000>;
- qcom,cpr-fuse-corners = <4>;
- qcom,cpr-fuse-combos = <8>;
- qcom,cpr-corners = <6>;
- qcom,cpr-speed-bins = <1>;
- qcom,cpr-speed-bin-corners = <6>;
- qcom,cpr-corner-fmax-map = <1 3 5 6>;
- qcom,allow-voltage-interpolation;
- qcom,allow-quotient-interpolation;
- qcom,cpr-scaled-open-loop-voltage-as-ceiling;
- qcom,cpr-voltage-ceiling =
- <840000 904000 944000
- 984000 992000 1064000>;
- qcom,cpr-voltage-floor =
- <592000 648000 712000
- 744000 784000 848000>;
- qcom,corner-frequencies =
- <1017600000 1382400000 1651200000
- 1843200000 1920000000 2208000000>;
-
- /* TT/FF parts i.e. turbo L1 OL voltage < 1048 mV */
- qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
- /* Speed bin 0; CPR rev 0..7 */
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 12000>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>;
-
- /* SS parts i.e turbo L1 OL voltage >= 1048 mV */
- qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
- /* Speed bin 0; CPR rev 0..7 */
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 20000 26000 0 20000>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>;
-
- /* v2 - FF parts i.e. turbo L1 OL voltage < 992 mV */
- qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
- /* Speed bin 0; CPR rev 0..7 */
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>;
-
- /* v2 - SS/TT parts i.e turbo L1 OL voltage >= 992 mV */
- qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
- /* Speed bin 0; CPR rev 0..7 */
- < 0 0 0 0>,
- < 0 7000 36000 4000>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>;
-
- /* v2 - FF parts i.e. turbo L1 OL voltage < 992 mV */
- qcom,cpr-closed-loop-voltage-adjustment-v2-0 =
- /* Speed bin 0; CPR rev 0..7 */
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>;
-
- /* v2 - SS/TT parts i.e turbo L1 OL voltage >= 992 mV */
- qcom,cpr-closed-loop-voltage-adjustment-v2-1 =
- /* Speed bin 0; CPR rev 0..7 */
- < 0 0 0 0>,
- < 0 0 19000 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>,
- < 0 0 0 0>;
-
- qcom,cpr-ro-scaling-factor =
- < 3970 4150 0 2280 2520 2470 2250 2280
- 2390 2330 2530 2500 850 2900 2510 2170 >,
- < 3970 4150 0 2280 2520 2470 2250 2280
- 2390 2330 2530 2500 850 2900 2510 2170 >,
- < 3970 4150 0 2280 2520 2470 2250 2280
- 2390 2330 2530 2500 850 2900 2510 2170 >,
- < 3970 4150 0 2280 2520 2470 2250 2280
- 2390 2330 2530 2500 850 2900 2510 2170 >;
-
- qcom,cpr-floor-to-ceiling-max-range =
- < 40000 40000 40000 40000 40000 40000>,
- < 40000 40000 40000 40000 40000 40000>,
- < 40000 40000 40000 40000 40000 40000>,
- < 40000 40000 40000 40000 40000 40000>,
- < 40000 40000 40000 40000 40000 40000>,
- < 40000 40000 40000 40000 40000 40000>,
- < 40000 40000 40000 40000 40000 40000>,
- < 40000 40000 40000 40000 40000 40000>;
- regulator-always-on;
- };
- };
- };
-
- npu_cpr: npu-cpr {
- compatible = "qcom,cpr3-ipq807x-npu-regulator";
- reg = <0xa4000 0x1000>, <0x0193d008 0x4>;
- reg-names = "fuse_base", "cpr_tcsr_reg";
- qcom,cpr-ctrl-name = "npu";
- vdd-supply = <&s4>;
- qcom,voltage-step = <8000>;
- thread@0 {
- qcom,cpr-thread-id = <0>;
- qcom,cpr-consecutive-up = <0>;
- qcom,cpr-consecutive-down = <2>;
- qcom,cpr-up-threshold = <2>;
- qcom,cpr-down-threshold = <1>;
-
- npu_vreg: regulator {
- regulator-name = "npu_corner";
- regulator-min-microvolt = <1>;
- regulator-max-microvolt = <3>;
- qcom,cpr-part-types = <2>;
- qcom,cpr-parts-voltage = <968000>;
- qcom,cpr-parts-voltage-v2 = <832001>;
- qcom,cpr-cold-temp-threshold-v2 = <30>;
- qcom,cpr-fuse-corners = <2>;
- qcom,cpr-fuse-combos = <1>;
- qcom,cpr-corners = <2>;
- qcom,cpr-speed-bins = <1>;
- qcom,cpr-speed-bin-corners = <2>;
- qcom,allow-voltage-interpolation;
- qcom,cpr-corner-fmax-map = <1 2>;
- qcom,cpr-voltage-ceiling =
- <912000 992000>;
- qcom,cpr-voltage-floor =
- <752000 792000>;
- qcom,corner-frequencies =
- <1497600000 1689600000>;
-
- /* TT/FF parts i.e. turbo OL voltage < 968 mV */
- qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
- < 40000 40000>;
-
- /* SS parts i.e turbo OL voltage >= 968 mV */
- qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
- < 24000 24000>;
-
- /* FF parts i.e. turbo OL voltage <= 832 mV */
- qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0=
- <40000 40000>;
-
- /* TT/SS parts i.e turbo OL voltage > 832 mV */
- qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1=
- <40000 40000>;
-
- /* FF parts i.e. turbo OL voltage <= 832 mV */
- qcom,cpr-cold-temp-voltage-adjustment-v2-0 =
- <0 0>;
-
- /* TT/SS parts i.e turbo OL voltage > 832 mV */
- qcom,cpr-cold-temp-voltage-adjustment-v2-1 =
- <35000 27000>;
- };
- };
- };
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi
deleted file mode 100644
index 129266c50d..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi
+++ /dev/null
@@ -1,531 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-&clocks {
- bias_pll_cc_clk {
- compatible = "fixed-clock";
- clock-frequency = <300000000>;
- #clock-cells = <0>;
- };
-
- bias_pll_nss_noc_clk {
- compatible = "fixed-clock";
- clock-frequency = <416500000>;
- #clock-cells = <0>;
- };
-};
-
-&soc {
- switch: ess-switch@3a000000 {
- compatible = "qcom,ess-switch-ipq807x";
- reg = <0x3a000000 0x1000000>;
- switch_access_mode = "local bus";
- switch_cpu_bmp = <0x1>; /* cpu port bitmap */
- switch_inner_bmp = <0x80>; /*inner port bitmap*/
- clocks = <&gcc GCC_CMN_12GPLL_AHB_CLK>,
- <&gcc GCC_CMN_12GPLL_SYS_CLK>,
- <&gcc GCC_UNIPHY0_AHB_CLK>,
- <&gcc GCC_UNIPHY0_SYS_CLK>,
- <&gcc GCC_UNIPHY1_AHB_CLK>,
- <&gcc GCC_UNIPHY1_SYS_CLK>,
- <&gcc GCC_UNIPHY2_AHB_CLK>,
- <&gcc GCC_UNIPHY2_SYS_CLK>,
- <&gcc GCC_PORT1_MAC_CLK>,
- <&gcc GCC_PORT2_MAC_CLK>,
- <&gcc GCC_PORT3_MAC_CLK>,
- <&gcc GCC_PORT4_MAC_CLK>,
- <&gcc GCC_PORT5_MAC_CLK>,
- <&gcc GCC_PORT6_MAC_CLK>,
- <&gcc GCC_NSS_PPE_CLK>,
- <&gcc GCC_NSS_PPE_CFG_CLK>,
- <&gcc GCC_NSSNOC_PPE_CLK>,
- <&gcc GCC_NSSNOC_PPE_CFG_CLK>,
- <&gcc GCC_NSS_EDMA_CLK>,
- <&gcc GCC_NSS_EDMA_CFG_CLK>,
- <&gcc GCC_NSS_PPE_IPE_CLK>,
- <&gcc GCC_NSS_PPE_BTQ_CLK>,
- <&gcc GCC_MDIO_AHB_CLK>,
- <&gcc GCC_NSS_NOC_CLK>,
- <&gcc GCC_NSSNOC_SNOC_CLK>,
- <&gcc GCC_MEM_NOC_NSS_AXI_CLK>,
- <&gcc GCC_NSS_CRYPTO_CLK>,
- <&gcc GCC_NSS_IMEM_CLK>,
- <&gcc GCC_NSS_PTP_REF_CLK>,
- <&gcc GCC_NSS_PORT1_RX_CLK>,
- <&gcc GCC_NSS_PORT1_TX_CLK>,
- <&gcc GCC_NSS_PORT2_RX_CLK>,
- <&gcc GCC_NSS_PORT2_TX_CLK>,
- <&gcc GCC_NSS_PORT3_RX_CLK>,
- <&gcc GCC_NSS_PORT3_TX_CLK>,
- <&gcc GCC_NSS_PORT4_RX_CLK>,
- <&gcc GCC_NSS_PORT4_TX_CLK>,
- <&gcc GCC_NSS_PORT5_RX_CLK>,
- <&gcc GCC_NSS_PORT5_TX_CLK>,
- <&gcc GCC_NSS_PORT6_RX_CLK>,
- <&gcc GCC_NSS_PORT6_TX_CLK>,
- <&gcc GCC_UNIPHY0_PORT1_RX_CLK>,
- <&gcc GCC_UNIPHY0_PORT1_TX_CLK>,
- <&gcc GCC_UNIPHY0_PORT2_RX_CLK>,
- <&gcc GCC_UNIPHY0_PORT2_TX_CLK>,
- <&gcc GCC_UNIPHY0_PORT3_RX_CLK>,
- <&gcc GCC_UNIPHY0_PORT3_TX_CLK>,
- <&gcc GCC_UNIPHY0_PORT4_RX_CLK>,
- <&gcc GCC_UNIPHY0_PORT4_TX_CLK>,
- <&gcc GCC_UNIPHY0_PORT5_RX_CLK>,
- <&gcc GCC_UNIPHY0_PORT5_TX_CLK>,
- <&gcc GCC_UNIPHY1_PORT5_RX_CLK>,
- <&gcc GCC_UNIPHY1_PORT5_TX_CLK>,
- <&gcc GCC_UNIPHY2_PORT6_RX_CLK>,
- <&gcc GCC_UNIPHY2_PORT6_TX_CLK>,
- <&gcc NSS_PORT5_RX_CLK_SRC>,
- <&gcc NSS_PORT5_TX_CLK_SRC>;
- clock-names = "cmn_ahb_clk", "cmn_sys_clk",
- "uniphy0_ahb_clk", "uniphy0_sys_clk",
- "uniphy1_ahb_clk", "uniphy1_sys_clk",
- "uniphy2_ahb_clk", "uniphy2_sys_clk",
- "port1_mac_clk", "port2_mac_clk",
- "port3_mac_clk", "port4_mac_clk",
- "port5_mac_clk", "port6_mac_clk",
- "nss_ppe_clk", "nss_ppe_cfg_clk",
- "nssnoc_ppe_clk", "nssnoc_ppe_cfg_clk",
- "nss_edma_clk", "nss_edma_cfg_clk",
- "nss_ppe_ipe_clk", "nss_ppe_btq_clk",
- "gcc_mdio_ahb_clk", "gcc_nss_noc_clk",
- "gcc_nssnoc_snoc_clk",
- "gcc_mem_noc_nss_axi_clk",
- "gcc_nss_crypto_clk",
- "gcc_nss_imem_clk",
- "gcc_nss_ptp_ref_clk",
- "nss_port1_rx_clk", "nss_port1_tx_clk",
- "nss_port2_rx_clk", "nss_port2_tx_clk",
- "nss_port3_rx_clk", "nss_port3_tx_clk",
- "nss_port4_rx_clk", "nss_port4_tx_clk",
- "nss_port5_rx_clk", "nss_port5_tx_clk",
- "nss_port6_rx_clk", "nss_port6_tx_clk",
- "uniphy0_port1_rx_clk",
- "uniphy0_port1_tx_clk",
- "uniphy0_port2_rx_clk",
- "uniphy0_port2_tx_clk",
- "uniphy0_port3_rx_clk",
- "uniphy0_port3_tx_clk",
- "uniphy0_port4_rx_clk",
- "uniphy0_port4_tx_clk",
- "uniphy0_port5_rx_clk",
- "uniphy0_port5_tx_clk",
- "uniphy1_port5_rx_clk",
- "uniphy1_port5_tx_clk",
- "uniphy2_port6_rx_clk",
- "uniphy2_port6_tx_clk",
- "nss_port5_rx_clk_src",
- "nss_port5_tx_clk_src";
- resets = <&gcc GCC_PPE_FULL_RESET>,
- <&gcc GCC_UNIPHY0_SOFT_RESET>,
- <&gcc GCC_UNIPHY0_XPCS_RESET>,
- <&gcc GCC_UNIPHY1_SOFT_RESET>,
- <&gcc GCC_UNIPHY1_XPCS_RESET>,
- <&gcc GCC_UNIPHY2_SOFT_RESET>,
- <&gcc GCC_UNIPHY2_XPCS_RESET>,
- <&gcc GCC_NSSPORT1_RESET>,
- <&gcc GCC_NSSPORT2_RESET>,
- <&gcc GCC_NSSPORT3_RESET>,
- <&gcc GCC_NSSPORT4_RESET>,
- <&gcc GCC_NSSPORT5_RESET>,
- <&gcc GCC_NSSPORT6_RESET>;
- reset-names = "ppe_rst", "uniphy0_soft_rst",
- "uniphy0_xpcs_rst", "uniphy1_soft_rst",
- "uniphy1_xpcs_rst", "uniphy2_soft_rst",
- "uniphy2_xpcs_rst", "nss_port1_rst",
- "nss_port2_rst", "nss_port3_rst",
- "nss_port4_rst", "nss_port5_rst",
- "nss_port6_rst";
- mdio-bus = <&mdio>;
- status = "disabled";
-
- port_scheduler_resource {
- port@0 {
- port_id = <0>;
- ucast_queue = <0 143>;
- mcast_queue = <256 271>;
- l0sp = <0 35>;
- l0cdrr = <0 47>;
- l0edrr = <0 47>;
- l1cdrr = <0 7>;
- l1edrr = <0 7>;
- };
- port@1 {
- port_id = <1>;
- ucast_queue = <144 159>;
- mcast_queue = <272 275>;
- l0sp = <36 39>;
- l0cdrr = <48 63>;
- l0edrr = <48 63>;
- l1cdrr = <8 11>;
- l1edrr = <8 11>;
- };
- port@2 {
- port_id = <2>;
- ucast_queue = <160 175>;
- mcast_queue = <276 279>;
- l0sp = <40 43>;
- l0cdrr = <64 79>;
- l0edrr = <64 79>;
- l1cdrr = <12 15>;
- l1edrr = <12 15>;
- };
- port@3 {
- port_id = <3>;
- ucast_queue = <176 191>;
- mcast_queue = <280 283>;
- l0sp = <44 47>;
- l0cdrr = <80 95>;
- l0edrr = <80 95>;
- l1cdrr = <16 19>;
- l1edrr = <16 19>;
- };
- port@4 {
- port_id = <4>;
- ucast_queue = <192 207>;
- mcast_queue = <284 287>;
- l0sp = <48 51>;
- l0cdrr = <96 111>;
- l0edrr = <96 111>;
- l1cdrr = <20 23>;
- l1edrr = <20 23>;
- };
- port@5 {
- port_id = <5>;
- ucast_queue = <208 223>;
- mcast_queue = <288 291>;
- l0sp = <52 55>;
- l0cdrr = <112 127>;
- l0edrr = <112 127>;
- l1cdrr = <24 27>;
- l1edrr = <24 27>;
- };
- port@6 {
- port_id = <6>;
- ucast_queue = <224 239>;
- mcast_queue = <292 295>;
- l0sp = <56 59>;
- l0cdrr = <128 143>;
- l0edrr = <128 143>;
- l1cdrr = <28 31>;
- l1edrr = <28 31>;
- };
- port@7 {
- port_id = <7>;
- ucast_queue = <240 255>;
- mcast_queue = <296 299>;
- l0sp = <60 63>;
- l0cdrr = <144 159>;
- l0edrr = <144 159>;
- l1cdrr = <32 35>;
- l1edrr = <32 35>;
- };
- };
- port_scheduler_config {
- port@0 {
- port_id = <0>;
- l1scheduler {
- group@0 {
- sp = <0 1>; /*L0 SPs*/
- /*cpri cdrr epri edrr*/
- cfg = <0 0 0 0>;
- };
- };
- l0scheduler {
- group@0 {
- /*unicast queues*/
- ucast_queue = <0 4 8>;
- /*multicast queues*/
- mcast_queue = <256 260>;
- /*sp cpri cdrr epri edrr*/
- cfg = <0 0 0 0 0>;
- };
- group@1 {
- ucast_queue = <1 5 9>;
- mcast_queue = <257 261>;
- cfg = <0 1 1 1 1>;
- };
- group@2 {
- ucast_queue = <2 6 10>;
- mcast_queue = <258 262>;
- cfg = <0 2 2 2 2>;
- };
- group@3 {
- ucast_queue = <3 7 11>;
- mcast_queue = <259 263>;
- cfg = <0 3 3 3 3>;
- };
- };
- };
- port@1 {
- port_id = <1>;
- l1scheduler {
- group@0 {
- sp = <36>;
- cfg = <0 8 0 8>;
- };
- group@1 {
- sp = <37>;
- cfg = <1 9 1 9>;
- };
- };
- l0scheduler {
- group@0 {
- ucast_queue = <144>;
- ucast_loop_pri = <16>;
- mcast_queue = <272>;
- mcast_loop_pri = <4>;
- cfg = <36 0 48 0 48>;
- };
- };
- };
- port@2 {
- port_id = <2>;
- l1scheduler {
- group@0 {
- sp = <40>;
- cfg = <0 12 0 12>;
- };
- group@1 {
- sp = <41>;
- cfg = <1 13 1 13>;
- };
- };
- l0scheduler {
- group@0 {
- ucast_queue = <160>;
- ucast_loop_pri = <16>;
- mcast_queue = <276>;
- mcast_loop_pri = <4>;
- cfg = <40 0 64 0 64>;
- };
- };
- };
- port@3 {
- port_id = <3>;
- l1scheduler {
- group@0 {
- sp = <44>;
- cfg = <0 16 0 16>;
- };
- group@1 {
- sp = <45>;
- cfg = <1 17 1 17>;
- };
- };
- l0scheduler {
- group@0 {
- ucast_queue = <176>;
- ucast_loop_pri = <16>;
- mcast_queue = <280>;
- mcast_loop_pri = <4>;
- cfg = <44 0 80 0 80>;
- };
- };
- };
- port@4 {
- port_id = <4>;
- l1scheduler {
- group@0 {
- sp = <48>;
- cfg = <0 20 0 20>;
- };
- group@1 {
- sp = <49>;
- cfg = <1 21 1 21>;
- };
- };
- l0scheduler {
- group@0 {
- ucast_queue = <192>;
- ucast_loop_pri = <16>;
- mcast_queue = <284>;
- mcast_loop_pri = <4>;
- cfg = <48 0 96 0 96>;
- };
- };
- };
- port@5 {
- port_id = <5>;
- l1scheduler {
- group@0 {
- sp = <52>;
- cfg = <0 24 0 24>;
- };
- group@1 {
- sp = <53>;
- cfg = <1 25 1 25>;
- };
- };
- l0scheduler {
- group@0 {
- ucast_queue = <208>;
- ucast_loop_pri = <16>;
- mcast_queue = <288>;
- mcast_loop_pri = <4>;
- cfg = <52 0 112 0 112>;
- };
- };
- };
- port@6 {
- port_id = <6>;
- l1scheduler {
- group@0 {
- sp = <56>;
- cfg = <0 28 0 28>;
- };
- group@1 {
- sp = <57>;
- cfg = <1 29 1 29>;
- };
- };
- l0scheduler {
- group@0 {
- ucast_queue = <224>;
- ucast_loop_pri = <16>;
- mcast_queue = <292>;
- mcast_loop_pri = <4>;
- cfg = <56 0 128 0 128>;
- };
- };
- };
- port@7 {
- port_id = <7>;
- l1scheduler {
- group@0 {
- sp = <60>;
- cfg = <0 32 0 32>;
- };
- group@1 {
- sp = <61>;
- cfg = <1 33 1 33>;
- };
- };
- l0scheduler {
- group@0 {
- ucast_queue = <240>;
- ucast_loop_pri = <16>;
- mcast_queue = <296>;
- cfg = <60 0 144 0 144>;
- };
- };
- };
- };
- };
-
- ess-uniphy@7a00000 {
- compatible = "qcom,ess-uniphy";
- reg = <0x7a00000 0x30000>;
- uniphy_access_mode = "local bus";
- };
-
- edma: edma@3ab00000 {
- compatible = "qcom,edma";
- reg = <0x3ab00000 0x76900>;
- reg-names = "edma-reg-base";
- qcom,txdesc-ring-start = <23>;
- qcom,txdesc-rings = <1>;
- qcom,txcmpl-ring-start = <7>;
- qcom,txcmpl-rings = <1>;
- qcom,rxfill-ring-start = <7>;
- qcom,rxfill-rings = <1>;
- qcom,rxdesc-ring-start = <15>;
- qcom,rxdesc-rings = <1>;
- interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&gcc GCC_EDMA_HW_RESET>;
- reset-names = "edma_rst";
- status = "disabled";
- };
-
- dp1: dp1 {
- device_type = "network";
- compatible = "qcom,nss-dp";
- qcom,id = <1>;
- reg = <0x3a001000 0x200>;
- qcom,mactype = <0>;
- local-mac-address = [000000000000];
- phy-mode = "sgmii";
- status = "disabled";
- };
-
- dp2: dp2 {
- device_type = "network";
- compatible = "qcom,nss-dp";
- qcom,id = <2>;
- reg = <0x3a001200 0x200>;
- qcom,mactype = <0>;
- local-mac-address = [000000000000];
- phy-mode = "sgmii";
- status = "disabled";
- };
-
- dp3: dp3 {
- device_type = "network";
- compatible = "qcom,nss-dp";
- qcom,id = <3>;
- reg = <0x3a001400 0x200>;
- qcom,mactype = <0>;
- local-mac-address = [000000000000];
- phy-mode = "sgmii";
- status = "disabled";
- };
-
- dp4: dp4 {
- device_type = "network";
- compatible = "qcom,nss-dp";
- qcom,id = <4>;
- reg = <0x3a001600 0x200>;
- qcom,mactype = <0>;
- local-mac-address = [000000000000];
- phy-mode = "sgmii";
- status = "disabled";
- };
-
- dp5: dp5 {
- device_type = "network";
- compatible = "qcom,nss-dp";
- qcom,id = <5>;
- reg = <0x3a001800 0x200>;
- qcom,mactype = <0>;
- local-mac-address = [000000000000];
- phy-mode = "sgmii";
- status = "disabled";
- };
-
- dp6: dp6 {
- device_type = "network";
- compatible = "qcom,nss-dp";
- qcom,id = <6>;
- reg = <0x3a001a00 0x200>;
- qcom,mactype = <0>;
- local-mac-address = [000000000000];
- phy-mode = "sgmii";
- status = "disabled";
- };
-
- dp5_syn: dp5-syn {
- device_type = "network";
- compatible = "qcom,nss-dp";
- qcom,id = <5>;
- reg = <0x3a003000 0x3fff>;
- qcom,mactype = <1>;
- local-mac-address = [000000000000];
- phy-mode = "sgmii";
- status = "disabled";
- };
-
- dp6_syn: dp6-syn {
- device_type = "network";
- compatible = "qcom,nss-dp";
- qcom,id = <6>;
- reg = <0x3a007000 0x3fff>;
- qcom,mactype = <1>;
- local-mac-address = [000000000000];
- phy-mode = "sgmii";
- status = "disabled";
- };
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi
deleted file mode 100644
index 8485814969..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <dt-bindings/thermal/thermal.h>
-#include "ipq8074-cpr-regulator.dtsi"
-
-&CPU0 {
- cpu-supply = <&apc_vreg>;
- voltage-tolerance = <1>;
-};
-
-&CPU1 {
- cpu-supply = <&apc_vreg>;
- voltage-tolerance = <1>;
-};
-
-&CPU2 {
- cpu-supply = <&apc_vreg>;
- voltage-tolerance = <1>;
-};
-
-&CPU3 {
- cpu-supply = <&apc_vreg>;
- voltage-tolerance = <1>;
-};
-&cpu0_thermal {
- trips {
- cpu0_passive_low: cpu-passive-low {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu0_passive_high: cpu-passive-high {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu0_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu0_passive_low>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu0_passive_high>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&cpu1_thermal {
- trips {
- cpu1_passive_low: cpu-passive-low {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu1_passive_high: cpu-passive-high {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu1_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu1_passive_low>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu1_passive_high>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&cpu2_thermal {
- trips {
- cpu2_passive_low: cpu-passive-low {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu2_passive_high: cpu-passive-high {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu2_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu2_passive_low>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu2_passive_high>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&cpu3_thermal {
- trips {
- cpu3_passive_low: cpu-passive-low {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu3_passive_high: cpu-passive-high {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu3_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu3_passive_low>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu3_passive_high>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&cluster_thermal {
- trips {
- cluster_passive_low: cluster-passive {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cluster_passive_high: cluster-passive-high {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cluster_crit: cluster_crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cluster_passive_low>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cluster_passive_high>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts
deleted file mode 100644
index d113b233ec..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts
+++ /dev/null
@@ -1,445 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2022, Karol Przybylski <itor@o2.pl>
- * Copyright (c) 2023, Andre Valentin <avalentin@marcant.net>
- */
-
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
-
-
-/ {
- model = "Zyxel NBG7815";
- compatible = "zyxel,nbg7815", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- serial1 = &blsp1_uart3;
- /* Alias as required by u-boot to patch MAC addresses */
- ethernet0 = &dp1;
- label-mac-device = &dp1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-pins {
- mdc {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-
-&blsp1_uart3 {
- status = "okay";
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <0>;
- status = "okay";
-
- /*
- * Bootloader will find the NAND DT node by the compatible and
- * then "fixup" it by adding the partitions from the SMEM table
- * using the legacy bindings thus making it impossible for us
- * to change the partition table or utilize NVMEM for calibration.
- * So add a dummy partitions node that bootloader will populate
- * and set it as disabled so the kernel ignores it instead of
- * printing warnings due to the broken way bootloader adds the
- * partitions.
- */
- partitions {
- status = "disabled";
- };
-
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:sbl1";
- reg = <0x0 0x50000>;
- read-only;
- };
-
- partition@50000 {
- label = "0:mibib";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:bootconfig";
- reg = <0x60000 0x20000>;
- read-only;
- };
-
- partition@80000 {
- label = "0:bootconfig1";
- reg = <0x80000 0x20000>;
- read-only;
- };
-
- partition@a0000 {
- label = "0:qsee";
- reg = <0xa0000 0x180000>;
- read-only;
- };
-
- partition@220000 {
- label = "0:qsee_1";
- reg = <0x220000 0x180000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "0:devcfg";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- label = "0:devcfg_1";
- reg = <0x3b0000 0x10000>;
- read-only;
- };
-
- partition@3c0000 {
- label = "0:apdp";
- reg = <0x3c0000 0x10000>;
- read-only;
- };
-
- partition@3d0000 {
- label = "0:apdp_1";
- reg = <0x3d0000 0x10000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "0:rpm";
- reg = <0x3e0000 0x40000>;
- read-only;
- };
-
- partition@420000 {
- label = "0:rpm_1";
- reg = <0x420000 0x40000>;
- read-only;
- };
-
- partition@460000 {
- label = "0:cdt";
- reg = <0x460000 0x10000>;
- read-only;
- };
-
- partition@470000 {
- label = "0:cdt_1";
- reg = <0x470000 0x10000>;
- read-only;
- };
-
- partition@480000 {
- label = "0:appsbl";
- reg = <0x480000 0xc0000>;
- read-only;
- };
-
- partition@540000 {
- label = "0:appsbl_1";
- reg = <0x540000 0xc0000>;
- read-only;
- };
-
- partition@600000 {
- compatible = "u-boot,env";
- label = "0:appsblenv";
- reg = <0x600000 0x10000>;
-
- macaddr_lan: ethaddr {
- #nvmem-cell-cells = <1>;
- };
- };
-
- partition@610000 {
- label = "0:art";
- reg = <0x610000 0x40000>;
- read-only;
- };
-
- partition@650000 {
- label = "0:ethphyfw";
- reg = <0x650000 0x80000>;
- read-only;
- };
-
- partition@6d0000 {
- label = "0:crt";
- reg = <0x6d0000 0x10000>;
- read-only;
- };
-
- partition@6e0000 {
- label = "dual_flag";
- reg = <0x6e0000 0x10000>;
- };
-
- partition@6f0000 {
- label = "reserved";
- reg = <0x6f0000 0x110000>;
- read-only;
- };
- };
- };
-};
-
-&mdio {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
-
- qca8075_1: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- qca8075_2: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-
- qca8075_3: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- };
-
- qca8075_4: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <3>;
- };
-
- qca8081: ethernet-phy@4{
- compatible = "ethernet-phy-id004d.d101";
- reg = <28>;
- reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
- };
-
- aqr113c: ethernet-phy@5 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- reset-gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- };
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>;
- switch_lan_bmp = <0x3e>;
- switch_wan_bmp = <0x40>;
- switch_mac_mode = <0x0>;
- switch_mac_mode1 = <0xf>;
- switch_mac_mode2 = <0xd>;
- bm_tick_mode = <0>;
- tm_tick_mode = <0>;
-
- qcom,port_phyinfo {
- port@0 {
- port_id = <1>;
- phy_address = <0>;
- };
-
- port@1 {
- port_id = <2>;
- phy_address = <1>;
- };
-
- port@2 {
- port_id = <3>;
- phy_address = <2>;
- };
-
- port@3 {
- port_id = <4>;
- phy_address = <3>;
- };
-
- port@4 {
- port_id = <5>;
- phy_address = <28>;
- port_mac_sel = "QGMAC_PORT";
- };
-
- port@5 {
- port_id = <6>;
- ethernet-phy-ieee802.3-c45;
- phy_address = <8>;
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&dp1 {
- status = "okay";
- phy-handle = <&qca8075_1>;
- label = "lan1";
- nvmem-cells = <&macaddr_lan 0>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp2 {
- status = "okay";
- phy-handle = <&qca8075_2>;
- label = "lan2";
- nvmem-cells = <&macaddr_lan 0>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp3 {
- status = "okay";
- phy-handle = <&qca8075_3>;
- label = "lan3";
- nvmem-cells = <&macaddr_lan 0>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp4 {
- status = "okay";
- phy-handle = <&qca8075_4>;
- label = "lan4";
- nvmem-cells = <&macaddr_lan 0>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp5 {
- status = "okay";
- phy-handle = <&qca8081>;
- label = "wan";
- nvmem-cells = <&macaddr_lan 1>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp6_syn {
- status = "okay";
- phy-handle = <&aqr113c>;
- label = "10g";
- nvmem-cells = <&macaddr_lan 0>;
- nvmem-cell-names = "mac-address";
-};
-
-&blsp1_i2c2 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- tmp103@70 {
- compatible = "ti,tmp103";
- reg = <0x70>;
- };
-};
-
-&sdhc_1 {
- status = "okay";
- /* unstable, problem with the hs400 > h200 speed switch */
- /delete-property/ mmc-hs400-1_8v;
- mmc-hs200-1_8v;
- mmc-ddr-1_8v;
- vqmmc-supply = <&l11>;
-};
-
-&ssphy_0 {
- status = "okay";
-};
-
-&qusb_phy_0 {
- status = "okay";
-};
-
-&ssphy_1 {
- status = "okay";
-};
-
-&qusb_phy_1 {
- status = "okay";
-};
-
-&usb_0 {
- status = "okay";
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "Zyxel-NBG7815";
-};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts
deleted file mode 100644
index 32386dc93e..0000000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts
+++ /dev/null
@@ -1,376 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Buffalo WXR-5950AX12";
- compatible = "buffalo,wxr-5950ax12", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- led-boot = &led_power_white;
- led-failsafe = &led_power_red;
- led-running = &led_power_white;
- led-upgrade = &led_power_white;
- label-mac-device = &dp5_syn;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs-append = " ubi.mtd=user_property root=/dev/ubiblock1_0";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "white:router";
- gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_WHITE>;
- };
-
- led-1 {
- label = "red:router";
- gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led_power_red: led-2 {
- label = "red:power";
- gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_POWER;
- };
-
- led_power_white: led-3 {
- label = "white:power";
- gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_POWER;
- };
-
- led-4 {
- label = "white:internet";
- gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_WHITE>;
- };
-
- led-5 {
- label = "red:internet";
- gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led-6 {
- label = "red:wireless";
- gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_WLAN;
- };
-
- led-7 {
- label = "white:wireless";
- gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_WLAN;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- /*
- * mode: 3x position switch
- *
- * - ROUTER
- * - AP
- * - WB (Wireless Bridge)
- */
- ap {
- label = "mode-ap";
- gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- bridge {
- label = "mode-wb";
- gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
-
- /*
- * op: 2x position switch
- *
- * - AUTO
- * - MANUAL (select Router/AP/WB manually)
- */
- manual {
- label = "op-manual";
- gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_2>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- reg_usb_vbus: regulator-5v-vbus {
- compatible = "regulator-fixed";
- regulator-name = "vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&tlmm 64 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-};
-
-&tlmm {
- mdio_pins: mdio-pins {
- mdc {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&qpic_nand {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <8>;
-
- partitions {
- compatible = "qcom,smem-part";
-
- partition-0-appsblenv {
- compatible = "fixed-partitions";
- label = "0:appsblenv";
- read-only;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- compatible = "u-boot,env";
- label = "env-data";
- reg = <0x0 0x40000>;
-
- macaddr_appsblenv_ethaddr: ethaddr {
- };
- };
- };
- };
- };
-};
-
-&mdio {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- /*
- * RESET pins of phy chips
- *
- * WXR-5950AX12 has 2x RESET pins for QCA8075 and AQR113C.
- * The pin of QCA8075 is for the chip and not phys in the chip, the
- * pin of AQR113C is for 2x chips. So both pins are not appropriate
- * to declare them as reset-gpios in phy nodes.
- * Multiple entries in reset-gpios of mdio may not be supported, but
- * leave the following as-is to show that the those reset pin exists.
- */
- reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>, /* QCA8075 RESET */
- <&tlmm 63 GPIO_ACTIVE_LOW>; /* AQR113C RESET (2x) */
-
- aqr113c_1: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0x0>;
- };
-
- aqr113c_2: ethernet-phy@8 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0x8>;
- };
-
- qca8075_1: ethernet-phy@18 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x18>;
- };
-
- qca8075_2: ethernet-phy@19 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x19>;
- };
-
- qca8075_3: ethernet-phy@1a {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x1a>;
- };
-
- qca8075_4: ethernet-phy@1b {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x1b>;
- };
-
- qca8075_5: ethernet-phy@1c {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x1c>;
- };
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>;
- switch_lan_bmp = <0x3e>;
- switch_wan_bmp = <0x40>;
- switch_mac_mode = <0xb>;
- switch_mac_mode1 = <0xd>;
- switch_mac_mode2 = <0xd>;
- bm_tick_mode = <0>;
- tm_tick_mode = <0>;
-
- qcom,port_phyinfo {
- port@0 {
- port_id = <1>;
- phy_address = <0x18>;
- };
-
- port@1 {
- port_id = <2>;
- phy_address = <0x19>;
- };
-
- port@2 {
- port_id = <3>;
- phy_address = <0x1a>;
- };
-
- port@3 {
- port_id = <4>;
- phy_address = <0x1b>;
- };
-
- port@4 {
- port_id = <5>;
- ethernet-phy-ieee802.3-c45;
- phy_address = <0x0>;
- };
-
- port@5 {
- port_id = <6>;
- ethernet-phy-ieee802.3-c45;
- phy_address = <0x8>;
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&dp2 {
- status = "okay";
- phy-handle = <&qca8075_2>;
- label = "lan4";
- nvmem-cells = <&macaddr_appsblenv_ethaddr>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp3 {
- status = "okay";
- phy-handle = <&qca8075_3>;
- label = "lan3";
- nvmem-cells = <&macaddr_appsblenv_ethaddr>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp4 {
- status = "okay";
- phy-handle = <&qca8075_4>;
- label = "lan2";
- nvmem-cells = <&macaddr_appsblenv_ethaddr>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp5_syn {
- status = "okay";
- phy-handle = <&aqr113c_1>;
- label = "wan";
- nvmem-cells = <&macaddr_appsblenv_ethaddr>;
- nvmem-cell-names = "mac-address";
-};
-
-&dp6_syn {
- status = "okay";
- phy-handle = <&aqr113c_2>;
- label = "lan1";
- nvmem-cells = <&macaddr_appsblenv_ethaddr>;
- nvmem-cell-names = "mac-address";
-};
-
-&ssphy_0 {
- status = "okay";
-};
-
-&qusb_phy_0 {
- status = "okay";
-};
-
-&usb_0 {
- status = "okay";
-
- vbus-supply = <&reg_usb_vbus>;
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "Buffalo-WXR-5950AX12";
-};
diff --git a/target/linux/ipq807x/generic/target.mk b/target/linux/ipq807x/generic/target.mk
deleted file mode 100644
index f5cb1fb19b..0000000000
--- a/target/linux/ipq807x/generic/target.mk
+++ /dev/null
@@ -1 +0,0 @@
-BOARDNAME:=Generic
diff --git a/target/linux/ipq807x/image/Makefile b/target/linux/ipq807x/image/Makefile
deleted file mode 100644
index f59ad0c15f..0000000000
--- a/target/linux/ipq807x/image/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-define Device/Default
- PROFILES := Default
- KERNEL_LOADADDR := 0x41000000
- DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
- DEVICE_DTS_CONFIG := config@1
- DEVICE_DTS_DIR := $(DTS_DIR)/qcom
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
- IMAGE/sysupgrade.bin/squashfs :=
-endef
-
-include $(SUBTARGET).mk
-
-$(eval $(call BuildImage))
diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk
deleted file mode 100644
index 124cdfc3b2..0000000000
--- a/target/linux/ipq807x/image/generic.mk
+++ /dev/null
@@ -1,175 +0,0 @@
-define Device/FitImage
- KERNEL_SUFFIX := -uImage.itb
- KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
- KERNEL_NAME := Image
-endef
-
-define Device/FitImageLzma
- KERNEL_SUFFIX := -uImage.itb
- KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
- KERNEL_NAME := Image
-endef
-
-define Device/EmmcImage
- IMAGES += factory.bin sysupgrade.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | sysupgrade-tar rootfs=$$$$@ | append-metadata
-endef
-
-define Device/UbiFit
- KERNEL_IN_UBI := 1
- IMAGES := factory.ubi sysupgrade.bin
- IMAGE/factory.ubi := append-ubi
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-endef
-
-define Device/buffalo_wxr-5950ax12
- $(call Device/FitImage)
- DEVICE_VENDOR := Buffalo
- DEVICE_MODEL := WXR-5950AX12
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@hk01
- SOC := ipq8074
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- DEVICE_PACKAGES := ipq-wifi-buffalo_wxr-5950ax12
-endef
-TARGET_DEVICES += buffalo_wxr-5950ax12
-
-define Device/dynalink_dl-wrx36
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Dynalink
- DEVICE_MODEL := DL-WRX36
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@rt5010w-d350-rev0
- SOC := ipq8072
- DEVICE_PACKAGES := ipq-wifi-dynalink_dl-wrx36
-endef
-TARGET_DEVICES += dynalink_dl-wrx36
-
-define Device/edgecore_eap102
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Edgecore
- DEVICE_MODEL := EAP102
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@ac02
- SOC := ipq8071
- DEVICE_PACKAGES := ipq-wifi-edgecore_eap102
- IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
-endef
-TARGET_DEVICES += edgecore_eap102
-
-define Device/edimax_cax1800
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Edimax
- DEVICE_MODEL := CAX1800
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@ac03
- SOC := ipq8070
- DEVICE_PACKAGES := ipq-wifi-edimax_cax1800
-endef
-TARGET_DEVICES += edimax_cax1800
-
-define Device/netgear_wax218
- $(call Device/FitImage)
- $(call Device/UbiFit)
- ARTIFACTS := web-ui-factory.fit
- DEVICE_VENDOR := Netgear
- DEVICE_MODEL := WAX218
- DEVICE_DTS_CONFIG := config@hk07
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- SOC := ipq8072
- ARTIFACT/web-ui-factory.fit := append-image initramfs-uImage.itb | \
- ubinize-kernel | qsdk-ipq-factory-nand
- DEVICE_PACKAGES := kmod-spi-gpio kmod-spi-bitbang kmod-gpio-nxp-74hc164 \
- ipq-wifi-netgear_wax218
-endef
-TARGET_DEVICES += netgear_wax218
-
-define Device/prpl_haze
- $(call Device/FitImage)
- $(call Device/EmmcImage)
- DEVICE_VENDOR := prpl Foundation
- DEVICE_MODEL := Haze
- DEVICE_DTS_CONFIG := config@hk09
- SOC := ipq8072
- DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci
-endef
-TARGET_DEVICES += prpl_haze
-
-define Device/qnap_301w
- $(call Device/FitImage)
- $(call Device/EmmcImage)
- DEVICE_VENDOR := QNAP
- DEVICE_MODEL := 301w
- DEVICE_DTS_CONFIG := config@hk01
- KERNEL_SIZE := 16384k
- SOC := ipq8072
- DEVICE_PACKAGES += ipq-wifi-qnap_301w
-endef
-TARGET_DEVICES += qnap_301w
-
-define Device/redmi_ax6
- $(call Device/xiaomi_ax3600)
- DEVICE_VENDOR := Redmi
- DEVICE_MODEL := AX6
- DEVICE_PACKAGES := ipq-wifi-redmi_ax6
-endef
-TARGET_DEVICES += redmi_ax6
-
-define Device/xiaomi_ax3600
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Xiaomi
- DEVICE_MODEL := AX3600
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@ac04
- SOC := ipq8071
- KERNEL_SIZE := 36608k
- DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- ARTIFACTS := initramfs-factory.ubi
- ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
-endif
-endef
-TARGET_DEVICES += xiaomi_ax3600
-
-define Device/xiaomi_ax9000
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Xiaomi
- DEVICE_MODEL := AX9000
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@hk14
- SOC := ipq8072
- KERNEL_SIZE := 57344k
- DEVICE_PACKAGES := ipq-wifi-xiaomi_ax9000 kmod-ath11k-pci ath11k-firmware-qcn9074 \
- kmod-ath10k-ct ath10k-firmware-qca9887-ct
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- ARTIFACTS := initramfs-factory.ubi
- ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
-endif
-endef
-TARGET_DEVICES += xiaomi_ax9000
-
-define Device/zyxel_nbg7815
- $(call Device/FitImage)
- $(call Device/EmmcImage)
- DEVICE_VENDOR := ZYXEL
- DEVICE_MODEL := NBG7815
- DEVICE_DTS_CONFIG := config@nbg7815
- SOC := ipq8074
- DEVICE_PACKAGES += ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci kmod-hwmon-tmp103 \
- kmod-bluetooth
-endef
-TARGET_DEVICES += zyxel_nbg7815
diff --git a/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch b/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch
deleted file mode 100644
index f1c0923301..0000000000
--- a/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From adf62d2727d4aa2b587e2db59eafb5be776a653c Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 5 Sep 2021 18:58:16 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add SPMI bus
-
-IPQ8074 uses SPMI for communication with the PMIC, so
-since its already supported add the DT node for it.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20210905165816.655275-1-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -320,6 +320,25 @@
- #reset-cells = <0x1>;
- };
-
-+ spmi_bus: spmi@200f000 {
-+ compatible = "qcom,spmi-pmic-arb";
-+ reg = <0x0200f000 0x001000>,
-+ <0x02400000 0x800000>,
-+ <0x02c00000 0x800000>,
-+ <0x03800000 0x200000>,
-+ <0x0200a000 0x000700>;
-+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "periph_irq";
-+ qcom,ee = <0>;
-+ qcom,channel = <0>;
-+ #address-cells = <2>;
-+ #size-cells = <0>;
-+ interrupt-controller;
-+ #interrupt-cells = <4>;
-+ cell-index = <0>;
-+ };
-+
- sdhc_1: sdhci@7824900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x7824900 0x500>, <0x7824000 0x800>;
diff --git a/target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch b/target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch
deleted file mode 100644
index 0e31970a82..0000000000
--- a/target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 94343612f165fc8b4f95fcbe6fd044d6f63d4a28 Mon Sep 17 00:00:00 2001
-From: Shawn Guo <shawn.guo@linaro.org>
-Date: Tue, 31 Aug 2021 13:23:25 +0800
-Subject: [PATCH] arm64: dts: qcom: Update BAM DMA node name per DT schema
-
-Follow dma-controller.yaml schema to use `dma-controller` as node name
-of BAM DMA devices.
-
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20210831052325.21229-1-shawn.guo@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -239,7 +239,7 @@
- status = "disabled";
- };
-
-- cryptobam: dma@704000 {
-+ cryptobam: dma-controller@704000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x00704000 0x20000>;
- interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch b/target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch
deleted file mode 100644
index b20cbe1b37..0000000000
--- a/target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From ccc5b088058bccdf454bd296867c47e56c415cde Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Fri, 1 Oct 2021 22:54:21 +0800
-Subject: [PATCH] arm64: dts: qcom: ipq8074: Add QUP5 I2C node
-
-Add node to support the QUP5 I2C controller inside of IPQ8074.
-It is exactly the same as QUP2 controllers.
-Some routers like ZTE MF269 use this bus.
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -457,6 +457,21 @@
- status = "disabled";
- };
-
-+ blsp1_i2c5: i2c@78b9000 {
-+ compatible = "qcom,i2c-qup-v2.2.1";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x78b9000 0x600>;
-+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-+ <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
-+ clock-names = "iface", "core";
-+ clock-frequency = <400000>;
-+ dmas = <&blsp_dma 21>, <&blsp_dma 20>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
- blsp1_i2c6: i2c@78ba000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- #address-cells = <1>;
diff --git a/target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch b/target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch
deleted file mode 100644
index 94fc27750c..0000000000
--- a/target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 1a82d7080001d395563ad8266d120d4cf63ad0a5 Mon Sep 17 00:00:00 2001
-From: Shawn Guo <shawn.guo@linaro.org>
-Date: Wed, 29 Sep 2021 11:42:46 +0800
-Subject: [PATCH] arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY
- child node
-
-'#clock-cells' is a required property of QMP PHY child node, not itself.
-Move it to fix the dtbs_check warnings.
-
-There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because
-child nodes already have the property.
-
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -91,7 +91,6 @@
- ssphy_1: phy@58000 {
- compatible = "qcom,ipq8074-qmp-usb3-phy";
- reg = <0x00058000 0x1c4>;
-- #clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-@@ -112,6 +111,7 @@
- <0x00058800 0x1f8>, /* PCS */
- <0x00058600 0x044>; /* PCS misc*/
- #phy-cells = <0>;
-+ #clock-cells = <1>;
- clocks = <&gcc GCC_USB1_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3phy_1_cc_pipe_clk";
-@@ -134,7 +134,6 @@
- ssphy_0: phy@78000 {
- compatible = "qcom,ipq8074-qmp-usb3-phy";
- reg = <0x00078000 0x1c4>;
-- #clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-@@ -155,6 +154,7 @@
- <0x00078800 0x1f8>, /* PCS */
- <0x00078600 0x044>; /* PCS misc*/
- #phy-cells = <0>;
-+ #clock-cells = <1>;
- clocks = <&gcc GCC_USB0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3phy_0_cc_pipe_clk";
diff --git a/target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch b/target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch
deleted file mode 100644
index b31c06cb58..0000000000
--- a/target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 036e332e29ee24396ad877cc6a1275d86a1c4b3d Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Thu, 7 Oct 2021 13:58:46 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add MDIO bus
-
-IPQ8074 uses an IPQ4019 compatible MDIO controller that is already
-supported in the kernel, so add the DT node in order to use it.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20211007115846.26255-1-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -231,6 +231,18 @@
- };
- };
-
-+ mdio: mdio@90000 {
-+ compatible = "qcom,ipq4019-mdio";
-+ reg = <0x00090000 0x64>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ clocks = <&gcc GCC_MDIO_AHB_CLK>;
-+ clock-names = "gcc_mdio_ahb_clk";
-+
-+ status = "disabled";
-+ };
-+
- prng: rng@e3000 {
- compatible = "qcom,prng-ee";
- reg = <0x000e3000 0x1000>;
diff --git a/target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch b/target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch
deleted file mode 100644
index afaa2bae82..0000000000
--- a/target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 29e135cf87900ac1da457bb27e98e30ca7f723ea Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Thu, 6 Jan 2022 22:25:12 +0100
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add SMEM support
-
-IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already
-supported by the kernel add the required DT nodes.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220106212512.1970828-1-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -76,6 +76,20 @@
- method = "smc";
- };
-
-+ reserved-memory {
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ ranges;
-+
-+ smem@4ab00000 {
-+ compatible = "qcom,smem";
-+ reg = <0x0 0x4ab00000 0x0 0x00100000>;
-+ no-map;
-+
-+ hwlocks = <&tcsr_mutex 0>;
-+ };
-+ };
-+
- firmware {
- scm {
- compatible = "qcom,scm-ipq8074", "qcom,scm";
-@@ -332,6 +346,12 @@
- #reset-cells = <0x1>;
- };
-
-+ tcsr_mutex: hwlock@1905000 {
-+ compatible = "qcom,tcsr-mutex";
-+ reg = <0x01905000 0x20000>;
-+ #hwlock-cells = <1>;
-+ };
-+
- spmi_bus: spmi@200f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0200f000 0x001000>,
diff --git a/target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch b/target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch
deleted file mode 100644
index 6b0db7092d..0000000000
--- a/target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 0f1cdeea7f237de21f244c06f2c102f93dbd9c4e Mon Sep 17 00:00:00 2001
-From: Kathiravan T <quic_kathirav@quicinc.com>
-Date: Fri, 7 Jan 2022 18:24:38 +0530
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add the reserved-memory node
-
-On IPQ8074, 4MB of memory is needed for TZ. So mark that region
-as reserved.
-
-Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
-[bjorn: Squash with existing reserved-memory node]
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/1641560078-860-1-git-send-email-quic_kathirav@quicinc.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -88,6 +88,11 @@
-
- hwlocks = <&tcsr_mutex 0>;
- };
-+
-+ memory@4ac00000 {
-+ no-map;
-+ reg = <0x0 0x4ac00000 0x0 0x00400000>;
-+ };
- };
-
- firmware {
diff --git a/target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch b/target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch
deleted file mode 100644
index 3d5372a6e6..0000000000
--- a/target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From a505f23abf0c31f40a2c3070d82e961b7c045664 Mon Sep 17 00:00:00 2001
-From: Kathiravan T <quic_kathirav@quicinc.com>
-Date: Tue, 8 Feb 2022 21:05:24 +0530
-Subject: [PATCH] arm64: dts: qcom: ipq8074: enable the GICv2m support
-
-GIC used in the IPQ8074 SoCs has one instance of the GICv2m extension,
-which supports upto 32 MSI interrupts. Lets add support for the same.
-
-Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/1644334525-11577-2-git-send-email-quic_kathirav@quicinc.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -635,9 +635,18 @@
-
- intc: interrupt-controller@b000000 {
- compatible = "qcom,msm-qgic2";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
- interrupt-controller;
- #interrupt-cells = <0x3>;
- reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
-+ ranges = <0 0xb00a000 0xffd>;
-+
-+ v2m@0 {
-+ compatible = "arm,gic-v2m-frame";
-+ msi-controller;
-+ reg = <0x0 0xffd>;
-+ };
- };
-
- timer {
diff --git a/target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch b/target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch
deleted file mode 100644
index 9018087e40..0000000000
--- a/target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 2a73fa24be1d5a263062696f55dcc90725f9159c Mon Sep 17 00:00:00 2001
-From: Kathiravan T <quic_kathirav@quicinc.com>
-Date: Wed, 2 Feb 2022 22:05:08 +0530
-Subject: [PATCH] arm64: dts: qcom: ipq8074: drop the clock-frequency property
-
-Drop the clock-frequency property from the MMIO timer node, since it
-is already configured by the bootloader.
-
-Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/1643819709-5410-2-git-send-email-quic_kathirav@quicinc.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -671,7 +671,6 @@
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0x0b120000 0x1000>;
-- clock-frequency = <19200000>;
-
- frame@b120000 {
- frame-number = <0>;
diff --git a/target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch b/target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch
deleted file mode 100644
index 19be9bd861..0000000000
--- a/target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 6f39b05b13e7be39919fd8d235bb0e63ecabf190 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 5 Apr 2022 08:34:43 +0200
-Subject: [PATCH] arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema
-
-The DT schema expects dma channels in tx-rx order. No functional
-change.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220405063451.12011-2-krzysztof.kozlowski@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -472,8 +472,8 @@
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
-- dmas = <&blsp_dma 15>, <&blsp_dma 14>;
-- dma-names = "rx", "tx";
-+ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
-+ dma-names = "tx", "rx";
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "disabled";
-@@ -489,8 +489,8 @@
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <100000>;
-- dmas = <&blsp_dma 17>, <&blsp_dma 16>;
-- dma-names = "rx", "tx";
-+ dmas = <&blsp_dma 16>, <&blsp_dma 17>;
-+ dma-names = "tx", "rx";
- status = "disabled";
- };
-
-@@ -504,8 +504,8 @@
- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
-- dmas = <&blsp_dma 21>, <&blsp_dma 20>;
-- dma-names = "rx", "tx";
-+ dmas = <&blsp_dma 20>, <&blsp_dma 21>;
-+ dma-names = "tx", "rx";
- status = "disabled";
- };
-
-@@ -519,8 +519,8 @@
- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <100000>;
-- dmas = <&blsp_dma 23>, <&blsp_dma 22>;
-- dma-names = "rx", "tx";
-+ dmas = <&blsp_dma 22>, <&blsp_dma 23>;
-+ dma-names = "tx", "rx";
- status = "disabled";
- };
-
diff --git a/target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch b/target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch
deleted file mode 100644
index d1c214c2c7..0000000000
--- a/target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 61d4a1751cfe5a22e5f18478fe16ffb1ee12607d Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 5 Apr 2022 08:34:44 +0200
-Subject: [PATCH] arm64: dts: qcom: align clocks in I2C/SPI with DT schema
-
-The DT schema expects clocks core-iface order. No functional change.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220405063451.12011-3-krzysztof.kozlowski@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 24 ++++++++++++------------
- 1 file changed, 12 insertions(+), 12 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -468,9 +468,9 @@
- #size-cells = <0>;
- reg = <0x078b6000 0x600>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
-- clock-names = "iface", "core";
-+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
-+ <&gcc GCC_BLSP1_AHB_CLK>;
-+ clock-names = "core", "iface";
- clock-frequency = <400000>;
- dmas = <&blsp_dma 14>, <&blsp_dma 15>;
- dma-names = "tx", "rx";
-@@ -485,9 +485,9 @@
- #size-cells = <0>;
- reg = <0x078b7000 0x600>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
-- clock-names = "iface", "core";
-+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
-+ <&gcc GCC_BLSP1_AHB_CLK>;
-+ clock-names = "core", "iface";
- clock-frequency = <100000>;
- dmas = <&blsp_dma 16>, <&blsp_dma 17>;
- dma-names = "tx", "rx";
-@@ -500,9 +500,9 @@
- #size-cells = <0>;
- reg = <0x78b9000 0x600>;
- interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
-- clock-names = "iface", "core";
-+ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
-+ <&gcc GCC_BLSP1_AHB_CLK>;
-+ clock-names = "core", "iface";
- clock-frequency = <400000>;
- dmas = <&blsp_dma 20>, <&blsp_dma 21>;
- dma-names = "tx", "rx";
-@@ -515,9 +515,9 @@
- #size-cells = <0>;
- reg = <0x078ba000 0x600>;
- interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
-- clock-names = "iface", "core";
-+ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
-+ <&gcc GCC_BLSP1_AHB_CLK>;
-+ clock-names = "core", "iface";
- clock-frequency = <100000>;
- dmas = <&blsp_dma 22>, <&blsp_dma 23>;
- dma-names = "tx", "rx";
diff --git a/target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch b/target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch
deleted file mode 100644
index 1b41f97002..0000000000
--- a/target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From ee9002a825695b5dca76f758a9365ca7f7d18265 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Wed, 4 May 2022 15:19:16 +0200
-Subject: [PATCH] arm64: dts: qcom: correct DWC3 node names and unit addresses
-
-Align DWC3 USB node names with DT schema ("usb" is expected) and correct
-the unit addresses to match the "reg" property. This also implies
-overriding nodes by label, instead of full path.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Link: https://lore.kernel.org/r/20220504131923.214367-7-krzysztof.kozlowski@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -579,7 +579,7 @@
- resets = <&gcc GCC_USB0_BCR>;
- status = "disabled";
-
-- dwc_0: dwc3@8a00000 {
-+ dwc_0: usb@8a00000 {
- compatible = "snps,dwc3";
- reg = <0x8a00000 0xcd00>;
- interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-@@ -619,7 +619,7 @@
- resets = <&gcc GCC_USB1_BCR>;
- status = "disabled";
-
-- dwc_1: dwc3@8c00000 {
-+ dwc_1: usb@8c00000 {
- compatible = "snps,dwc3";
- reg = <0x8c00000 0xcd00>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch b/target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch
deleted file mode 100644
index 68173e81d2..0000000000
--- a/target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 71061acf1a9343317e4d34a2c4578ed9301112cc Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Wed, 4 May 2022 15:19:17 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add dedicated qcom,ipq8074-dwc3
- compatible
-
-Add dedicated compatible for DWC3 USB node name to allow more accurate
-DT schema matching.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Link: https://lore.kernel.org/r/20220504131923.214367-8-krzysztof.kozlowski@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -554,7 +554,7 @@
- };
-
- usb_0: usb@8af8800 {
-- compatible = "qcom,dwc3";
-+ compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
- reg = <0x08af8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
-@@ -594,7 +594,7 @@
- };
-
- usb_1: usb@8cf8800 {
-- compatible = "qcom,dwc3";
-+ compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
- reg = <0x08cf8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
diff --git a/target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch b/target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch
deleted file mode 100644
index de7c3eaffc..0000000000
--- a/target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 159cbe595c1018a0172c637374ec69af643fa9f5 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Wed, 4 May 2022 15:19:22 +0200
-Subject: [PATCH] arm64: dts: qcom: align DWC3 USB clocks with DT schema
-
-Align order of clocks and their names with Qualcomm DWC3 USB DT schema.
-No functional impact expected.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Link: https://lore.kernel.org/r/20220504131923.214367-13-krzysztof.kozlowski@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -564,8 +564,8 @@
- <&gcc GCC_USB0_MASTER_CLK>,
- <&gcc GCC_USB0_SLEEP_CLK>,
- <&gcc GCC_USB0_MOCK_UTMI_CLK>;
-- clock-names = "sys_noc_axi",
-- "master",
-+ clock-names = "cfg_noc",
-+ "core",
- "sleep",
- "mock_utmi";
-
-@@ -604,8 +604,8 @@
- <&gcc GCC_USB1_MASTER_CLK>,
- <&gcc GCC_USB1_SLEEP_CLK>,
- <&gcc GCC_USB1_MOCK_UTMI_CLK>;
-- clock-names = "sys_noc_axi",
-- "master",
-+ clock-names = "cfg_noc",
-+ "core",
- "sleep",
- "mock_utmi";
-
diff --git a/target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch b/target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch
deleted file mode 100644
index 515582da5c..0000000000
--- a/target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From a9f7dc27469ca9588d7aa572bdfdfd5f0f1aab6a Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Thu, 26 May 2022 22:42:47 +0200
-Subject: [PATCH] arm64: dts: qcom: adjust whitespace around '='
-
-Fix whitespace coding style: use single space instead of tabs or
-multiple spaces around '=' sign in property assignment. No functional
-changes (same DTB).
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220526204248.832139-1-krzysztof.kozlowski@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -119,7 +119,7 @@
- <&xo>;
- clock-names = "aux", "cfg_ahb", "ref";
-
-- resets = <&gcc GCC_USB1_PHY_BCR>,
-+ resets = <&gcc GCC_USB1_PHY_BCR>,
- <&gcc GCC_USB3PHY_1_PHY_BCR>;
- reset-names = "phy","common";
- status = "disabled";
-@@ -162,7 +162,7 @@
- <&xo>;
- clock-names = "aux", "cfg_ahb", "ref";
-
-- resets = <&gcc GCC_USB0_PHY_BCR>,
-+ resets = <&gcc GCC_USB0_PHY_BCR>,
- <&gcc GCC_USB3PHY_0_PHY_BCR>;
- reset-names = "phy","common";
- status = "disabled";
diff --git a/target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch b/target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch
deleted file mode 100644
index 20f7dc926d..0000000000
--- a/target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 2e9703ffe97a1c447c0d00c061526fbeeade6107 Mon Sep 17 00:00:00 2001
-From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
-Date: Sun, 15 May 2022 03:24:19 +0530
-Subject: [PATCH] arm64: dts: qcom: Fix sdhci node names - use 'mmc@'
-
-Since the Qualcomm sdhci-msm device-tree binding has been converted
-to yaml format, 'make dtbs_check' reports issues with
-inconsistent 'sdhci@' convention used for specifying the
-sdhci nodes. The generic mmc bindings expect 'mmc@' format
-instead.
-
-Fix the same.
-
-Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
-Cc: Rob Herring <robh@kernel.org>
-Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
-[bjorn: Moved non-arm64 changes to separate commit]
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220514215424.1007718-2-bhupesh.sharma@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -376,7 +376,7 @@
- cell-index = <0>;
- };
-
-- sdhc_1: sdhci@7824900 {
-+ sdhc_1: mmc@7824900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x7824900 0x500>, <0x7824000 0x800>;
- reg-names = "hc_mem", "core_mem";
diff --git a/target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch b/target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch
deleted file mode 100644
index 24fd7fc9f7..0000000000
--- a/target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 18363f691e931abf0e9bdc9b5169fb15aa10224d Mon Sep 17 00:00:00 2001
-From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
-Date: Sun, 15 May 2022 03:24:22 +0530
-Subject: [PATCH] arm64: dts: qcom: Fix ordering of 'clocks' & 'clock-names'
- for sdhci nodes
-
-Since the Qualcomm sdhci-msm device-tree binding has been converted
-to yaml format, 'make dtbs_check' reports a number of issues with
-ordering of 'clocks' & 'clock-names' for sdhci nodes:
-
- arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
- clock-names:0: 'iface' was expected
-
- arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
- clock-names:1: 'core' was expected
-
- arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
- clock-names:2: 'xo' was expected
-
-Fix the same by updating the offending 'dts' files.
-
-Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
-Cc: Rob Herring <robh@kernel.org>
-Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220514215424.1007718-5-bhupesh.sharma@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -385,10 +385,10 @@
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
-- clocks = <&xo>,
-- <&gcc GCC_SDCC1_AHB_CLK>,
-- <&gcc GCC_SDCC1_APPS_CLK>;
-- clock-names = "xo", "iface", "core";
-+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-+ <&gcc GCC_SDCC1_APPS_CLK>,
-+ <&xo>;
-+ clock-names = "iface", "core", "xo";
- max-frequency = <384000000>;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
diff --git a/target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch b/target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch
deleted file mode 100644
index f2055d94b1..0000000000
--- a/target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From aa14b0c11f6442cd489d33c2855941055a3d4fa6 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 15 May 2022 23:00:41 +0200
-Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add PPE crypto clock
-
-Add binding for the PPE crypto clock in IPQ8074.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220515210048.483898-4-robimarko@gmail.com
----
- include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h
-+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
-@@ -233,6 +233,7 @@
- #define GCC_PCIE0_AXI_S_BRIDGE_CLK 224
- #define GCC_PCIE0_RCHNG_CLK_SRC 225
- #define GCC_PCIE0_RCHNG_CLK 226
-+#define GCC_CRYPTO_PPE_CLK 227
-
- #define GCC_BLSP1_BCR 0
- #define GCC_BLSP1_QUP1_BCR 1
diff --git a/target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch b/target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch
deleted file mode 100644
index 71fd33331d..0000000000
--- a/target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From f91d0e8bd6c1f812bc2589050c05a90ee886c749 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 15 May 2022 23:00:42 +0200
-Subject: [PATCH] clk: qcom: ipq8074: add PPE crypto clock
-
-The built-in PPE engine has a dedicated clock for the EIP-197 crypto
-engine.
-
-So, since the required clock currently missing add support for it.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220515210048.483898-5-robimarko@gmail.com
----
- drivers/clk/qcom/gcc-ipq8074.c | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/drivers/clk/qcom/gcc-ipq8074.c
-+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -3183,6 +3183,24 @@ static struct clk_branch gcc_nss_ptp_ref
- },
- };
-
-+static struct clk_branch gcc_crypto_ppe_clk = {
-+ .halt_reg = 0x68310,
-+ .halt_bit = 31,
-+ .clkr = {
-+ .enable_reg = 0x68310,
-+ .enable_mask = BIT(0),
-+ .hw.init = &(struct clk_init_data){
-+ .name = "gcc_crypto_ppe_clk",
-+ .parent_names = (const char *[]){
-+ "nss_ppe_clk_src"
-+ },
-+ .num_parents = 1,
-+ .flags = CLK_SET_RATE_PARENT,
-+ .ops = &clk_branch2_ops,
-+ },
-+ },
-+};
-+
- static struct clk_branch gcc_nssnoc_ce_apb_clk = {
- .halt_reg = 0x6830c,
- .clkr = {
-@@ -4655,6 +4673,7 @@ static struct clk_regmap *gcc_ipq8074_cl
- [GCC_PCIE0_RCHNG_CLK_SRC] = &pcie0_rchng_clk_src.clkr,
- [GCC_PCIE0_RCHNG_CLK] = &gcc_pcie0_rchng_clk.clkr,
- [GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr,
-+ [GCC_CRYPTO_PPE_CLK] = &gcc_crypto_ppe_clk.clkr,
- };
-
- static const struct qcom_reset_map gcc_ipq8074_resets[] = {
diff --git a/target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch b/target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch
deleted file mode 100644
index 908ed233b2..0000000000
--- a/target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From f5441c669d5442d247c69bab3eb27c074c0dd19a Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 15 May 2022 23:00:45 +0200
-Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add USB GDSCs
-
-Add bindings for the USB GDSCs found in IPQ8074 GCC.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220515210048.483898-8-robimarko@gmail.com
----
- include/dt-bindings/clock/qcom,gcc-ipq8074.h | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h
-+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
-@@ -368,4 +368,7 @@
- #define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130
- #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131
-
-+#define USB0_GDSC 0
-+#define USB1_GDSC 1
-+
- #endif
diff --git a/target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch b/target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch
deleted file mode 100644
index 7fcb190578..0000000000
--- a/target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From ff35d239b7b64f71d7dd9d0ce887647de2cacfcc Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 15 May 2022 23:00:46 +0200
-Subject: [PATCH] clk: qcom: ipq8074: add USB GDSCs
-
-Add GDSC-s for each of the two USB controllers built-in the IPQ8074.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220515210048.483898-9-robimarko@gmail.com
----
- drivers/clk/qcom/Kconfig | 1 +
- drivers/clk/qcom/gcc-ipq8074.c | 24 ++++++++++++++++++++++++
- 2 files changed, 25 insertions(+)
-
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -166,6 +166,7 @@ config IPQ_LCC_806X
-
- config IPQ_GCC_8074
- tristate "IPQ8074 Global Clock Controller"
-+ select QCOM_GDSC
- help
- Support for global clock controller on ipq8074 devices.
- Say Y if you want to use peripheral devices such as UART, SPI,
---- a/drivers/clk/qcom/gcc-ipq8074.c
-+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -22,6 +22,7 @@
- #include "clk-alpha-pll.h"
- #include "clk-regmap-divider.h"
- #include "clk-regmap-mux.h"
-+#include "gdsc.h"
- #include "reset.h"
-
- enum {
-@@ -4408,6 +4409,22 @@ static struct clk_branch gcc_pcie0_axi_s
- },
- };
-
-+static struct gdsc usb0_gdsc = {
-+ .gdscr = 0x3e078,
-+ .pd = {
-+ .name = "usb0_gdsc",
-+ },
-+ .pwrsts = PWRSTS_OFF_ON,
-+};
-+
-+static struct gdsc usb1_gdsc = {
-+ .gdscr = 0x3f078,
-+ .pd = {
-+ .name = "usb1_gdsc",
-+ },
-+ .pwrsts = PWRSTS_OFF_ON,
-+};
-+
- static const struct alpha_pll_config ubi32_pll_config = {
- .l = 0x4e,
- .config_ctl_val = 0x200d4aa8,
-@@ -4811,6 +4828,11 @@ static const struct qcom_reset_map gcc_i
- [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 },
- };
-
-+static struct gdsc *gcc_ipq8074_gdscs[] = {
-+ [USB0_GDSC] = &usb0_gdsc,
-+ [USB1_GDSC] = &usb1_gdsc,
-+};
-+
- static const struct of_device_id gcc_ipq8074_match_table[] = {
- { .compatible = "qcom,gcc-ipq8074" },
- { }
-@@ -4833,6 +4855,8 @@ static const struct qcom_cc_desc gcc_ipq
- .num_resets = ARRAY_SIZE(gcc_ipq8074_resets),
- .clk_hws = gcc_ipq8074_hws,
- .num_clk_hws = ARRAY_SIZE(gcc_ipq8074_hws),
-+ .gdscs = gcc_ipq8074_gdscs,
-+ .num_gdscs = ARRAY_SIZE(gcc_ipq8074_gdscs),
- };
-
- static int gcc_ipq8074_probe(struct platform_device *pdev)
diff --git a/target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch b/target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch
deleted file mode 100644
index d515ec9076..0000000000
--- a/target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 53211e85006ebb9bf7fb4482288639612f3146e7 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 15 May 2022 23:00:48 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add USB power domains
-
-Add USB power domains provided by GCC GDSCs.
-Add the required #power-domain-cells to the GCC as well.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220515210048.483898-11-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -348,6 +348,7 @@
- compatible = "qcom,gcc-ipq8074";
- reg = <0x01800000 0x80000>;
- #clock-cells = <0x1>;
-+ #power-domain-cells = <1>;
- #reset-cells = <0x1>;
- };
-
-@@ -576,6 +577,8 @@
- <133330000>,
- <19200000>;
-
-+ power-domains = <&gcc USB0_GDSC>;
-+
- resets = <&gcc GCC_USB0_BCR>;
- status = "disabled";
-
-@@ -616,6 +619,8 @@
- <133330000>,
- <19200000>;
-
-+ power-domains = <&gcc USB1_GDSC>;
-+
- resets = <&gcc GCC_USB1_BCR>;
- status = "disabled";
-
diff --git a/target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch b/target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch
deleted file mode 100644
index 57fe73ae92..0000000000
--- a/target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 85a9cab9b9bb471eae016cdbfabd928585c23cce Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 4 Jul 2022 13:33:18 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: move ARMv8 timer out of SoC node
-
-The ARM timer is usually considered not part of SoC node, just like
-other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning:
-
-arch/arm64/boot/dts/qcom/ipq8072-ax9000.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'}
- From schema: dtschema/schemas/simple-bus.yaml
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-[bjorn: Moved node after "soc" for alphabetical ordering]
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220704113318.623102-1-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -654,14 +654,6 @@
- };
- };
-
-- timer {
-- compatible = "arm,armv8-timer";
-- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-- };
--
- watchdog: watchdog@b017000 {
- compatible = "qcom,kpss-wdt";
- reg = <0xb017000 0x1000>;
-@@ -853,4 +845,12 @@
- status = "disabled";
- };
- };
-+
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+ };
- };
diff --git a/target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch b/target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch
deleted file mode 100644
index b262a804b3..0000000000
--- a/target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 8e6af077ced3931ac18e37f0eb3fc6f1a20b0e4a Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 4 Jul 2022 16:35:54 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add reset to SDHCI
-
-Add reset to SDHCI controller so it can be reset to avoid timeout issues
-after software reset due to bootloader set configuration.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220704143554.1180927-2-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -390,6 +390,7 @@
- <&gcc GCC_SDCC1_APPS_CLK>,
- <&xo>;
- clock-names = "iface", "core", "xo";
-+ resets = <&gcc GCC_SDCC1_BCR>;
- max-frequency = <384000000>;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
diff --git a/target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch b/target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch
deleted file mode 100644
index c058c5abe4..0000000000
--- a/target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 0171978734227bdd7813bc6d805f609126e3849e Mon Sep 17 00:00:00 2001
-From: Johan Hovold <johan+linaro@kernel.org>
-Date: Tue, 5 Jul 2022 13:40:22 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: drop USB PHY clock index
-
-The QMP USB PHY provides a single clock so drop the redundant clock
-index.
-
-Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220705114032.22787-5-johan+linaro@kernel.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -130,7 +130,7 @@
- <0x00058800 0x1f8>, /* PCS */
- <0x00058600 0x044>; /* PCS misc*/
- #phy-cells = <0>;
-- #clock-cells = <1>;
-+ #clock-cells = <0>;
- clocks = <&gcc GCC_USB1_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3phy_1_cc_pipe_clk";
-@@ -173,7 +173,7 @@
- <0x00078800 0x1f8>, /* PCS */
- <0x00078600 0x044>; /* PCS misc*/
- #phy-cells = <0>;
-- #clock-cells = <1>;
-+ #clock-cells = <0>;
- clocks = <&gcc GCC_USB0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3phy_0_cc_pipe_clk";
diff --git a/target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch b/target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch
deleted file mode 100644
index e50c66f531..0000000000
--- a/target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From a6e1d17fbfd41113bf47345e65953873e717ca63 Mon Sep 17 00:00:00 2001
-From: Shawn Guo <shawn.guo@linaro.org>
-Date: Tue, 14 Sep 2021 09:40:48 +0800
-Subject: [PATCH] mailbox: qcom-apcs-ipc: Consolidate msm8994 type apcs_data
-
-The msm8994 type of apcs_data is defined multiple times with different
-SoC name encoded. Consolidate them on msm8994 and remove the data
-duplication.
-
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
----
- drivers/mailbox/qcom-apcs-ipc-mailbox.c | 26 +++++--------------------
- 1 file changed, 5 insertions(+), 21 deletions(-)
-
---- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c
-+++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
-@@ -33,10 +33,6 @@ static const struct qcom_apcs_ipc_data i
- .offset = 8, .clk_name = "qcom,apss-ipq6018-clk"
- };
-
--static const struct qcom_apcs_ipc_data ipq8074_apcs_data = {
-- .offset = 8, .clk_name = NULL
--};
--
- static const struct qcom_apcs_ipc_data msm8916_apcs_data = {
- .offset = 8, .clk_name = "qcom-apcs-msm8916-clk"
- };
-@@ -49,18 +45,6 @@ static const struct qcom_apcs_ipc_data m
- .offset = 16, .clk_name = NULL
- };
-
--static const struct qcom_apcs_ipc_data msm8998_apcs_data = {
-- .offset = 8, .clk_name = NULL
--};
--
--static const struct qcom_apcs_ipc_data sdm660_apcs_data = {
-- .offset = 8, .clk_name = NULL
--};
--
--static const struct qcom_apcs_ipc_data sm6125_apcs_data = {
-- .offset = 8, .clk_name = NULL
--};
--
- static const struct qcom_apcs_ipc_data apps_shared_apcs_data = {
- .offset = 12, .clk_name = NULL
- };
-@@ -160,21 +144,21 @@ static int qcom_apcs_ipc_remove(struct p
- /* .data is the offset of the ipc register within the global block */
- static const struct of_device_id qcom_apcs_ipc_of_match[] = {
- { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data },
-- { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq8074_apcs_data },
-+ { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &msm8994_apcs_data },
- { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data },
- { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data },
- { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data },
- { .compatible = "qcom,msm8994-apcs-kpss-global", .data = &msm8994_apcs_data },
- { .compatible = "qcom,msm8996-apcs-hmss-global", .data = &msm8996_apcs_data },
-- { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8998_apcs_data },
-+ { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8994_apcs_data },
- { .compatible = "qcom,qcs404-apcs-apps-global", .data = &msm8916_apcs_data },
- { .compatible = "qcom,sc7180-apss-shared", .data = &apps_shared_apcs_data },
- { .compatible = "qcom,sc8180x-apss-shared", .data = &apps_shared_apcs_data },
-- { .compatible = "qcom,sdm660-apcs-hmss-global", .data = &sdm660_apcs_data },
-+ { .compatible = "qcom,sdm660-apcs-hmss-global", .data = &msm8994_apcs_data },
- { .compatible = "qcom,sdm845-apss-shared", .data = &apps_shared_apcs_data },
-- { .compatible = "qcom,sm6125-apcs-hmss-global", .data = &sm6125_apcs_data },
-+ { .compatible = "qcom,sm6125-apcs-hmss-global", .data = &msm8994_apcs_data },
- { .compatible = "qcom,sm8150-apss-shared", .data = &apps_shared_apcs_data },
-- { .compatible = "qcom,sm6115-apcs-hmss-global", .data = &sdm660_apcs_data },
-+ { .compatible = "qcom,sm6115-apcs-hmss-global", .data = &msm8994_apcs_data },
- { .compatible = "qcom,sdx55-apcs-gcc", .data = &sdx55_apcs_data },
- {}
- };
diff --git a/target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch b/target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch
deleted file mode 100644
index cd1dcf2ba2..0000000000
--- a/target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 28e239ecd69a99748181bfdf5d2238ff1a8d0646 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:08:48 +0200
-Subject: [PATCH] mailbox: qcom-apcs-ipc: add IPQ8074 APSS clock support
-
-IPQ8074 has the APSS clock controller utilizing the same register space as
-the APCS, so provide access to the APSS utilizing a child device like
-IPQ6018.
-
-IPQ6018 and IPQ8074 use the same controller and driver, so just utilize
-IPQ6018 match data for IPQ8074.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
----
- drivers/mailbox/qcom-apcs-ipc-mailbox.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c
-+++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
-@@ -144,7 +144,7 @@ static int qcom_apcs_ipc_remove(struct p
- /* .data is the offset of the ipc register within the global block */
- static const struct of_device_id qcom_apcs_ipc_of_match[] = {
- { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data },
-- { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &msm8994_apcs_data },
-+ { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq6018_apcs_data },
- { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data },
- { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data },
- { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data },
diff --git a/target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch b/target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch
deleted file mode 100644
index 87a1fe82e7..0000000000
--- a/target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From aea90e172420a062197849d7914b2fa032de0228 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Thu, 7 Jul 2022 19:37:33 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add APCS node
-
-APCS now has support for providing the APSS clocks as the child device
-for IPQ8074.
-
-So, add the required DT node for it as it will later be used as the CPU
-clocksource.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-[bjorn: Sorted node based on address]
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220707173733.404947-4-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -663,6 +663,14 @@
- timeout-sec = <30>;
- };
-
-+ apcs_glb: mailbox@b111000 {
-+ compatible = "qcom,ipq8074-apcs-apps-global";
-+ reg = <0x0b111000 0x6000>;
-+
-+ #clock-cells = <1>;
-+ #mbox-cells = <1>;
-+ };
-+
- timer@b120000 {
- #address-cells = <1>;
- #size-cells = <1>;
diff --git a/target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch b/target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch
deleted file mode 100644
index 8fae8ade75..0000000000
--- a/target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From a3f36600fd758173c1ec315684e4ae72c6e85654 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 8 Jul 2022 15:38:45 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add #size/address-cells to DTSI
-
-Add #size-cells and #address-cells to the SoC DTSI to avoid duplicating
-the same properties in board DTS files.
-
-Remove the mentioned properties from current board DTS files.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220708133846.599735-1-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 --
- arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 3 ---
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 +++
- 3 files changed, 3 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-@@ -5,8 +5,6 @@
- #include "ipq8074.dtsi"
-
- / {
-- #address-cells = <0x2>;
-- #size-cells = <0x2>;
- model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
- compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
- interrupt-parent = <&intc>;
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
-@@ -7,9 +7,6 @@
- #include "ipq8074.dtsi"
-
- / {
-- #address-cells = <0x2>;
-- #size-cells = <0x2>;
--
- interrupt-parent = <&intc>;
-
- aliases {
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -7,6 +7,9 @@
- #include <dt-bindings/clock/qcom,gcc-ipq8074.h>
-
- / {
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+
- model = "Qualcomm Technologies, Inc. IPQ8074";
- compatible = "qcom,ipq8074";
-
diff --git a/target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch b/target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch
deleted file mode 100644
index 27a43c43ea..0000000000
--- a/target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 7d57ca4d56856b7f7b97adda6e97cf5db4dcce93 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 8 Jul 2022 15:38:46 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add interrupt-parent to DTSI
-
-Add interrupt-parent to the SoC DTSI to avoid duplicating it in each board
-DTS file.
-
-Remove interrupt-parent from existing board DTS files.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220708133846.599735-2-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 1 -
- arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 2 --
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 +
- 3 files changed, 1 insertion(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-@@ -7,7 +7,6 @@
- / {
- model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
- compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
-- interrupt-parent = <&intc>;
-
- aliases {
- serial0 = &blsp1_uart5;
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
-@@ -7,8 +7,6 @@
- #include "ipq8074.dtsi"
-
- / {
-- interrupt-parent = <&intc>;
--
- aliases {
- serial0 = &blsp1_uart5;
- };
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -12,6 +12,7 @@
-
- model = "Qualcomm Technologies, Inc. IPQ8074";
- compatible = "qcom,ipq8074";
-+ interrupt-parent = <&intc>;
-
- clocks {
- sleep_clk: sleep_clk {
diff --git a/target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch b/target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch
deleted file mode 100644
index f2fce43e5e..0000000000
--- a/target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From a19df563230af392f2e84e57d69367f96b4a8c56 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 12 Jul 2022 16:42:43 +0200
-Subject: [PATCH] arm64: dts: qcom: align SDHCI reg-names with DT schema
-
-DT schema requires SDHCI reg names to be hc/core without "_mem" suffix,
-just like TXT bindings were expecting before the conversion.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Douglas Anderson <dianders@chromium.org>
-Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220712144245.17417-4-krzysztof.kozlowski@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -384,7 +384,7 @@
- sdhc_1: mmc@7824900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x7824900 0x500>, <0x7824000 0x800>;
-- reg-names = "hc_mem", "core_mem";
-+ reg-names = "hc", "core";
-
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch b/target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch
deleted file mode 100644
index 2faf82baeb..0000000000
--- a/target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 7bd608426c407a79debea54b2b243950f330c5b8 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:06:24 +0200
-Subject: [PATCH] clk: qcom: apss-ipq-pll: use OF match data for Alpha PLL
- config
-
-Convert the driver to use OF match data for providing the Alpha PLL config
-per compatible.
-This is required for IPQ8074 support since it uses a different Alpha PLL
-config.
-
-While we are here rename "ipq_pll_config" to "ipq6018_pll_config" to make
-it clear that it is for IPQ6018 only.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220628.339366-5-robimarko@gmail.com
----
- drivers/clk/qcom/apss-ipq-pll.c | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/clk/qcom/apss-ipq-pll.c
-+++ b/drivers/clk/qcom/apss-ipq-pll.c
-@@ -2,6 +2,7 @@
- // Copyright (c) 2018, The Linux Foundation. All rights reserved.
- #include <linux/clk-provider.h>
- #include <linux/module.h>
-+#include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/regmap.h>
-
-@@ -36,7 +37,7 @@ static struct clk_alpha_pll ipq_pll = {
- },
- };
-
--static const struct alpha_pll_config ipq_pll_config = {
-+static const struct alpha_pll_config ipq6018_pll_config = {
- .l = 0x37,
- .config_ctl_val = 0x04141200,
- .config_ctl_hi_val = 0x0,
-@@ -54,6 +55,7 @@ static const struct regmap_config ipq_pl
-
- static int apss_ipq_pll_probe(struct platform_device *pdev)
- {
-+ const struct alpha_pll_config *ipq_pll_config;
- struct device *dev = &pdev->dev;
- struct regmap *regmap;
- void __iomem *base;
-@@ -67,7 +69,11 @@ static int apss_ipq_pll_probe(struct pla
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
-
-- clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
-+ ipq_pll_config = of_device_get_match_data(&pdev->dev);
-+ if (!ipq_pll_config)
-+ return -ENODEV;
-+
-+ clk_alpha_pll_configure(&ipq_pll, regmap, ipq_pll_config);
-
- ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
- if (ret)
-@@ -78,7 +84,7 @@ static int apss_ipq_pll_probe(struct pla
- }
-
- static const struct of_device_id apss_ipq_pll_match_table[] = {
-- { .compatible = "qcom,ipq6018-a53pll" },
-+ { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config },
- { }
- };
- MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
diff --git a/target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch b/target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch
deleted file mode 100644
index 4e1bb8aff2..0000000000
--- a/target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From d22c8f1bd94602d1bf2b377c3befe54e749b963d Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:06:25 +0200
-Subject: [PATCH] clk: qcom: apss-ipq-pll: update IPQ6018 Alpha PLL config
-
-Update the IPQ6018 Alpha PLL config to the latest one from the downstream
-5.4 kernel[1].
-
-This one should match the production SoC-s.
-
-Tested on IPQ6018 CP01-C1 reference board.
-
-[1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.1.r4/drivers/clk/qcom/apss-ipq-pll.c#L41
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220628.339366-6-robimarko@gmail.com
----
- drivers/clk/qcom/apss-ipq-pll.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/qcom/apss-ipq-pll.c
-+++ b/drivers/clk/qcom/apss-ipq-pll.c
-@@ -39,10 +39,14 @@ static struct clk_alpha_pll ipq_pll = {
-
- static const struct alpha_pll_config ipq6018_pll_config = {
- .l = 0x37,
-- .config_ctl_val = 0x04141200,
-- .config_ctl_hi_val = 0x0,
-+ .config_ctl_val = 0x240d4828,
-+ .config_ctl_hi_val = 0x6,
- .early_output_mask = BIT(3),
-+ .aux2_output_mask = BIT(2),
-+ .aux_output_mask = BIT(1),
- .main_output_mask = BIT(0),
-+ .test_ctl_val = 0x1c0000C0,
-+ .test_ctl_hi_val = 0x4000,
- };
-
- static const struct regmap_config ipq_pll_regmap_config = {
diff --git a/target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch b/target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch
deleted file mode 100644
index f5f18acb1b..0000000000
--- a/target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From e0a711bd88ba98f6ab5118d248ec84fcf495d313 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:06:26 +0200
-Subject: [PATCH] clk: qcom: apss-ipq-pll: add support for IPQ8074
-
-Add support for IPQ8074 since it uses the same PLL setup, however it uses
-slightly different Alpha PLL config.
-
-Alpha PLL config was obtained by dumping PLL registers from a running
-device.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220628.339366-7-robimarko@gmail.com
----
- drivers/clk/qcom/apss-ipq-pll.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/clk/qcom/apss-ipq-pll.c
-+++ b/drivers/clk/qcom/apss-ipq-pll.c
-@@ -49,6 +49,18 @@ static const struct alpha_pll_config ipq
- .test_ctl_hi_val = 0x4000,
- };
-
-+static const struct alpha_pll_config ipq8074_pll_config = {
-+ .l = 0x48,
-+ .config_ctl_val = 0x200d4828,
-+ .config_ctl_hi_val = 0x6,
-+ .early_output_mask = BIT(3),
-+ .aux2_output_mask = BIT(2),
-+ .aux_output_mask = BIT(1),
-+ .main_output_mask = BIT(0),
-+ .test_ctl_val = 0x1c000000,
-+ .test_ctl_hi_val = 0x4000,
-+};
-+
- static const struct regmap_config ipq_pll_regmap_config = {
- .reg_bits = 32,
- .reg_stride = 4,
-@@ -89,6 +101,7 @@ static int apss_ipq_pll_probe(struct pla
-
- static const struct of_device_id apss_ipq_pll_match_table[] = {
- { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config },
-+ { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config },
- { }
- };
- MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
diff --git a/target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch b/target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch
deleted file mode 100644
index 451066099d..0000000000
--- a/target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From f7fb35d540240889a8f45f3fd42363cbc1a448e2 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 19 Aug 2022 00:06:20 +0200
-Subject: [PATCH] clk: qcom: clk-rcg2: add rcg2 mux ops
-
-An RCG may act as a mux that switch between 2 parents.
-This is the case on IPQ6018 and IPQ8074 where the APCS core clk that feeds
-the CPU cluster clock just switches between XO and the PLL that feeds it.
-
-Add the required ops to add support for this special configuration and use
-the generic mux function to determine the rate.
-
-This way we dont have to keep a essentially dummy frequency table to use
-RCG2 as a mux.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220628.339366-1-robimarko@gmail.com
----
- drivers/clk/qcom/clk-rcg.h | 1 +
- drivers/clk/qcom/clk-rcg2.c | 7 +++++++
- 2 files changed, 8 insertions(+)
-
---- a/drivers/clk/qcom/clk-rcg.h
-+++ b/drivers/clk/qcom/clk-rcg.h
-@@ -164,6 +164,7 @@ struct clk_rcg2_gfx3d {
-
- extern const struct clk_ops clk_rcg2_ops;
- extern const struct clk_ops clk_rcg2_floor_ops;
-+extern const struct clk_ops clk_rcg2_mux_closest_ops;
- extern const struct clk_ops clk_edp_pixel_ops;
- extern const struct clk_ops clk_byte_ops;
- extern const struct clk_ops clk_byte2_ops;
---- a/drivers/clk/qcom/clk-rcg2.c
-+++ b/drivers/clk/qcom/clk-rcg2.c
-@@ -477,6 +477,13 @@ const struct clk_ops clk_rcg2_floor_ops
- };
- EXPORT_SYMBOL_GPL(clk_rcg2_floor_ops);
-
-+const struct clk_ops clk_rcg2_mux_closest_ops = {
-+ .determine_rate = __clk_mux_determine_rate_closest,
-+ .get_parent = clk_rcg2_get_parent,
-+ .set_parent = clk_rcg2_set_parent,
-+};
-+EXPORT_SYMBOL_GPL(clk_rcg2_mux_closest_ops);
-+
- struct frac_entry {
- int num;
- int den;
diff --git a/target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch b/target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch
deleted file mode 100644
index c279e2804e..0000000000
--- a/target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 6b9d5ecd2913758780a0529f9b95392f330b721b Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:06:21 +0200
-Subject: [PATCH] clk: qcom: apss-ipq6018: fix apcs_alias0_clk_src
-
-While working on IPQ8074 APSS driver it was discovered that IPQ6018 and
-IPQ8074 use almost the same PLL and APSS clocks, however APSS driver is
-currently broken.
-
-More precisely apcs_alias0_clk_src is broken, it was added as regmap_mux
-clock.
-However after debugging why it was always stuck at 800Mhz, it was figured
-out that its not regmap_mux compatible at all.
-It is a simple mux but it uses RCG2 register layout and control bits, so
-utilize the new clk_rcg2_mux_closest_ops to correctly drive it while not
-having to provide a dummy frequency table.
-
-While we are here, use ARRAY_SIZE for number of parents.
-
-Tested on IPQ6018-CP01-C1 reference board and multiple IPQ8074 boards.
-
-Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller")
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220628.339366-2-robimarko@gmail.com
----
- drivers/clk/qcom/apss-ipq6018.c | 13 ++++++-------
- 1 file changed, 6 insertions(+), 7 deletions(-)
-
---- a/drivers/clk/qcom/apss-ipq6018.c
-+++ b/drivers/clk/qcom/apss-ipq6018.c
-@@ -16,7 +16,7 @@
- #include "clk-regmap.h"
- #include "clk-branch.h"
- #include "clk-alpha-pll.h"
--#include "clk-regmap-mux.h"
-+#include "clk-rcg.h"
-
- enum {
- P_XO,
-@@ -33,16 +33,15 @@ static const struct parent_map parents_a
- { P_APSS_PLL_EARLY, 5 },
- };
-
--static struct clk_regmap_mux apcs_alias0_clk_src = {
-- .reg = 0x0050,
-- .width = 3,
-- .shift = 7,
-+static struct clk_rcg2 apcs_alias0_clk_src = {
-+ .cmd_rcgr = 0x0050,
-+ .hid_width = 5,
- .parent_map = parents_apcs_alias0_clk_src_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "apcs_alias0_clk_src",
- .parent_data = parents_apcs_alias0_clk_src,
-- .num_parents = 2,
-- .ops = &clk_regmap_mux_closest_ops,
-+ .num_parents = ARRAY_SIZE(parents_apcs_alias0_clk_src),
-+ .ops = &clk_rcg2_mux_closest_ops,
- .flags = CLK_SET_RATE_PARENT,
- },
- };
diff --git a/target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch b/target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch
deleted file mode 100644
index dd57eae360..0000000000
--- a/target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 6463c10bfdbd684ec7ecfd408ea541283215a088 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:06:28 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add A53 PLL node
-
-Add the required node for A53 PLL which will be used to provide the CPU
-clock via APCS for APSS scaling.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220628.339366-9-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -675,6 +675,14 @@
- #mbox-cells = <1>;
- };
-
-+ a53pll: clock@b116000 {
-+ compatible = "qcom,ipq8074-a53pll";
-+ reg = <0x0b116000 0x40>;
-+ #clock-cells = <0>;
-+ clocks = <&xo>;
-+ clock-names = "xo";
-+ };
-+
- timer@b120000 {
- #address-cells = <1>;
- #size-cells = <1>;
diff --git a/target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch b/target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch
deleted file mode 100644
index 5c8ca8c547..0000000000
--- a/target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 23c5ff3143ce43a76eebdf60a93436de9db39a7a Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:06:27 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: correct APCS register space size
-
-APCS DTS addition that was merged, was not supposed to get merged as it
-was part of patch series that was superseded by 2 more patch series
-that resolved issues with this one and greatly simplified things.
-
-Since it already got merged, start by correcting the register space
-size as APCS will not be providing regmap for PLL and it will conflict
-with the standalone A53 PLL node.
-
-Fixes: 50ed9fffec3a ("arm64: dts: qcom: ipq8074: add APCS node")
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220628.339366-8-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -669,7 +669,7 @@
-
- apcs_glb: mailbox@b111000 {
- compatible = "qcom,ipq8074-apcs-apps-global";
-- reg = <0x0b111000 0x6000>;
-+ reg = <0x0b111000 0x1000>;
-
- #clock-cells = <1>;
- #mbox-cells = <1>;
diff --git a/target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch b/target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch
deleted file mode 100644
index 2c6e70b14d..0000000000
--- a/target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From e593e834fe8ba9bf314d8215ac05d8787f81efda Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:02:42 +0200
-Subject: [PATCH] thermal/drivers/tsens: Add support for combined interrupt
-
-Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for
-signaling both up/low and critical trips.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220245.338396-2-robimarko@gmail.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/qcom/tsens-8960.c | 1 +
- drivers/thermal/qcom/tsens-v0_1.c | 1 +
- drivers/thermal/qcom/tsens-v1.c | 1 +
- drivers/thermal/qcom/tsens-v2.c | 1 +
- drivers/thermal/qcom/tsens.c | 38 ++++++++++++++++++++++++++-----
- drivers/thermal/qcom/tsens.h | 2 ++
- 6 files changed, 38 insertions(+), 6 deletions(-)
-
---- a/drivers/thermal/qcom/tsens-8960.c
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -269,6 +269,7 @@ static const struct tsens_ops ops_8960 =
- static struct tsens_features tsens_8960_feat = {
- .ver_major = VER_0,
- .crit_int = 0,
-+ .combo_int = 0,
- .adc = 1,
- .srot_split = 0,
- .max_sensors = 11,
---- a/drivers/thermal/qcom/tsens-v0_1.c
-+++ b/drivers/thermal/qcom/tsens-v0_1.c
-@@ -549,6 +549,7 @@ static int __init init_8939(struct tsens
- static struct tsens_features tsens_v0_1_feat = {
- .ver_major = VER_0_1,
- .crit_int = 0,
-+ .combo_int = 0,
- .adc = 1,
- .srot_split = 1,
- .max_sensors = 11,
---- a/drivers/thermal/qcom/tsens-v1.c
-+++ b/drivers/thermal/qcom/tsens-v1.c
-@@ -273,6 +273,7 @@ static int calibrate_8976(struct tsens_p
- static struct tsens_features tsens_v1_feat = {
- .ver_major = VER_1_X,
- .crit_int = 0,
-+ .combo_int = 0,
- .adc = 1,
- .srot_split = 1,
- .max_sensors = 11,
---- a/drivers/thermal/qcom/tsens-v2.c
-+++ b/drivers/thermal/qcom/tsens-v2.c
-@@ -31,6 +31,7 @@
- static struct tsens_features tsens_v2_feat = {
- .ver_major = VER_2_X,
- .crit_int = 1,
-+ .combo_int = 0,
- .adc = 0,
- .srot_split = 1,
- .max_sensors = 16,
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -531,6 +531,27 @@ static irqreturn_t tsens_irq_thread(int
- return IRQ_HANDLED;
- }
-
-+/**
-+ * tsens_combined_irq_thread() - Threaded interrupt handler for combined interrupts
-+ * @irq: irq number
-+ * @data: tsens controller private data
-+ *
-+ * Handle the combined interrupt as if it were 2 separate interrupts, so call the
-+ * critical handler first and then the up/low one.
-+ *
-+ * Return: IRQ_HANDLED
-+ */
-+static irqreturn_t tsens_combined_irq_thread(int irq, void *data)
-+{
-+ irqreturn_t ret;
-+
-+ ret = tsens_critical_irq_thread(irq, data);
-+ if (ret != IRQ_HANDLED)
-+ return ret;
-+
-+ return tsens_irq_thread(irq, data);
-+}
-+
- static int tsens_set_trips(void *_sensor, int low, int high)
- {
- struct tsens_sensor *s = _sensor;
-@@ -1081,13 +1102,18 @@ static int tsens_register(struct tsens_p
- tsens_mC_to_hw(priv->sensor, 0));
- }
-
-- ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
-- if (ret < 0)
-- return ret;
-+ if (priv->feat->combo_int) {
-+ ret = tsens_register_irq(priv, "combined",
-+ tsens_combined_irq_thread);
-+ } else {
-+ ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
-+ if (ret < 0)
-+ return ret;
-
-- if (priv->feat->crit_int)
-- ret = tsens_register_irq(priv, "critical",
-- tsens_critical_irq_thread);
-+ if (priv->feat->crit_int)
-+ ret = tsens_register_irq(priv, "critical",
-+ tsens_critical_irq_thread);
-+ }
-
- return ret;
- }
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -495,6 +495,7 @@ enum regfield_ids {
- * struct tsens_features - Features supported by the IP
- * @ver_major: Major number of IP version
- * @crit_int: does the IP support critical interrupts?
-+ * @combo_int: does the IP use one IRQ for up, low and critical thresholds?
- * @adc: do the sensors only output adc code (instead of temperature)?
- * @srot_split: does the IP neatly splits the register space into SROT and TM,
- * with SROT only being available to secure boot firmware?
-@@ -504,6 +505,7 @@ enum regfield_ids {
- struct tsens_features {
- unsigned int ver_major;
- unsigned int crit_int:1;
-+ unsigned int combo_int:1;
- unsigned int adc:1;
- unsigned int srot_split:1;
- unsigned int has_watchdog:1;
diff --git a/target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch b/target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch
deleted file mode 100644
index 5a571a36b6..0000000000
--- a/target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 7805365fee582056b32c69cf35aafbb94b14a8ca Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:02:43 +0200
-Subject: [PATCH] thermal/drivers/tsens: Allow configuring min and max trips
-
-IPQ8074 and IPQ6018 dont support negative trip temperatures and support
-up to 204 degrees C as the max trip temperature.
-
-So, instead of always setting the -40 as min and 120 degrees C as max
-allow it to be configured as part of the features.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/qcom/tsens-8960.c | 2 ++
- drivers/thermal/qcom/tsens-v0_1.c | 2 ++
- drivers/thermal/qcom/tsens-v1.c | 2 ++
- drivers/thermal/qcom/tsens-v2.c | 2 ++
- drivers/thermal/qcom/tsens.c | 4 ++--
- drivers/thermal/qcom/tsens.h | 4 ++++
- 6 files changed, 14 insertions(+), 2 deletions(-)
-
---- a/drivers/thermal/qcom/tsens-8960.c
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -273,6 +273,8 @@ static struct tsens_features tsens_8960_
- .adc = 1,
- .srot_split = 0,
- .max_sensors = 11,
-+ .trip_min_temp = -40000,
-+ .trip_max_temp = 120000,
- };
-
- struct tsens_plat_data data_8960 = {
---- a/drivers/thermal/qcom/tsens-v0_1.c
-+++ b/drivers/thermal/qcom/tsens-v0_1.c
-@@ -553,6 +553,8 @@ static struct tsens_features tsens_v0_1_
- .adc = 1,
- .srot_split = 1,
- .max_sensors = 11,
-+ .trip_min_temp = -40000,
-+ .trip_max_temp = 120000,
- };
-
- static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
---- a/drivers/thermal/qcom/tsens-v1.c
-+++ b/drivers/thermal/qcom/tsens-v1.c
-@@ -277,6 +277,8 @@ static struct tsens_features tsens_v1_fe
- .adc = 1,
- .srot_split = 1,
- .max_sensors = 11,
-+ .trip_min_temp = -40000,
-+ .trip_max_temp = 120000,
- };
-
- static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
---- a/drivers/thermal/qcom/tsens-v2.c
-+++ b/drivers/thermal/qcom/tsens-v2.c
-@@ -35,6 +35,8 @@ static struct tsens_features tsens_v2_fe
- .adc = 0,
- .srot_split = 1,
- .max_sensors = 16,
-+ .trip_min_temp = -40000,
-+ .trip_max_temp = 120000,
- };
-
- static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -572,8 +572,8 @@ static int tsens_set_trips(void *_sensor
- dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
- hw_id, __func__, low, high);
-
-- cl_high = clamp_val(high, -40000, 120000);
-- cl_low = clamp_val(low, -40000, 120000);
-+ cl_high = clamp_val(high, priv->feat->trip_min_temp, priv->feat->trip_max_temp);
-+ cl_low = clamp_val(low, priv->feat->trip_min_temp, priv->feat->trip_max_temp);
-
- high_val = tsens_mC_to_hw(s, cl_high);
- low_val = tsens_mC_to_hw(s, cl_low);
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -501,6 +501,8 @@ enum regfield_ids {
- * with SROT only being available to secure boot firmware?
- * @has_watchdog: does this IP support watchdog functionality?
- * @max_sensors: maximum sensors supported by this version of the IP
-+ * @trip_min_temp: minimum trip temperature supported by this version of the IP
-+ * @trip_max_temp: maximum trip temperature supported by this version of the IP
- */
- struct tsens_features {
- unsigned int ver_major;
-@@ -510,6 +512,8 @@ struct tsens_features {
- unsigned int srot_split:1;
- unsigned int has_watchdog:1;
- unsigned int max_sensors;
-+ int trip_min_temp;
-+ int trip_max_temp;
- };
-
- /**
diff --git a/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch b/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch
deleted file mode 100644
index 3e3e77a0a8..0000000000
--- a/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 0164d794cbc58488a7321272e95958d10cf103a4 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:02:44 +0200
-Subject: [PATCH] thermal/drivers/tsens: Add IPQ8074 support
-
-Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP
-it only has one IRQ, that is used for up/low as well as critical.
-It also does not support negative trip temperatures.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220818220245.338396-4-robimarko@gmail.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/qcom/tsens-v2.c | 17 +++++++++++++++++
- drivers/thermal/qcom/tsens.c | 3 +++
- drivers/thermal/qcom/tsens.h | 2 +-
- 3 files changed, 21 insertions(+), 1 deletion(-)
-
---- a/drivers/thermal/qcom/tsens-v2.c
-+++ b/drivers/thermal/qcom/tsens-v2.c
-@@ -39,6 +39,17 @@ static struct tsens_features tsens_v2_fe
- .trip_max_temp = 120000,
- };
-
-+static struct tsens_features ipq8074_feat = {
-+ .ver_major = VER_2_X,
-+ .crit_int = 1,
-+ .combo_int = 1,
-+ .adc = 0,
-+ .srot_split = 1,
-+ .max_sensors = 16,
-+ .trip_min_temp = 0,
-+ .trip_max_temp = 204000,
-+};
-+
- static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
- /* ----- SROT ------ */
- /* VERSION */
-@@ -104,6 +115,12 @@ struct tsens_plat_data data_tsens_v2 = {
- .fields = tsens_v2_regfields,
- };
-
-+struct tsens_plat_data data_ipq8074 = {
-+ .ops = &ops_generic_v2,
-+ .feat = &ipq8074_feat,
-+ .fields = tsens_v2_regfields,
-+};
-+
- /* Kept around for backward compatibility with old msm8996.dtsi */
- struct tsens_plat_data data_8996 = {
- .num_sensors = 13,
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -991,6 +991,9 @@ static const struct of_device_id tsens_t
- .compatible = "qcom,ipq8064-tsens",
- .data = &data_8960,
- }, {
-+ .compatible = "qcom,ipq8074-tsens",
-+ .data = &data_ipq8074,
-+ }, {
- .compatible = "qcom,mdm9607-tsens",
- .data = &data_9607,
- }, {
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -599,6 +599,6 @@ extern struct tsens_plat_data data_8916,
- extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
-
- /* TSENS v2 targets */
--extern struct tsens_plat_data data_8996, data_tsens_v2;
-+extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
-
- #endif /* __QCOM_TSENS_H__ */
diff --git a/target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch b/target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch
deleted file mode 100644
index bad75e4597..0000000000
--- a/target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From c3cc0c2a17f552be2426200e47a9e2c62cf449ce Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:02:45 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add thermal nodes
-
-IPQ8074 has a tsens v2.3.0 peripheral which monitors
-temperatures around the various subsystems on the
-die.
-
-So lets add the tsens and thermal zone nodes, passive
-CPU cooling will come in later patches after CPU frequency
-scaling is supported.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220245.338396-5-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 96 +++++++++++++++++++++++++++
- 1 file changed, 96 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -274,6 +274,16 @@
- status = "disabled";
- };
-
-+ tsens: thermal-sensor@4a9000 {
-+ compatible = "qcom,ipq8074-tsens";
-+ reg = <0x4a9000 0x1000>, /* TM */
-+ <0x4a8000 0x1000>; /* SROT */
-+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "combined";
-+ #qcom,sensors = <16>;
-+ #thermal-sensor-cells = <1>;
-+ };
-+
- cryptobam: dma-controller@704000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x00704000 0x20000>;
-@@ -874,4 +884,90 @@
- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-+
-+ thermal-zones {
-+ nss-top-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 4>;
-+ };
-+
-+ nss0-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 5>;
-+ };
-+
-+ nss1-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 6>;
-+ };
-+
-+ wcss-phya0-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 7>;
-+ };
-+
-+ wcss-phya1-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 8>;
-+ };
-+
-+ cpu0_thermal: cpu0-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 9>;
-+ };
-+
-+ cpu1_thermal: cpu1-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 10>;
-+ };
-+
-+ cpu2_thermal: cpu2-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 11>;
-+ };
-+
-+ cpu3_thermal: cpu3-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 12>;
-+ };
-+
-+ cluster_thermal: cluster-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 13>;
-+ };
-+
-+ wcss-phyb0-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 14>;
-+ };
-+
-+ wcss-phyb1-thermal {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&tsens 15>;
-+ };
-+ };
- };
diff --git a/target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch b/target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch
deleted file mode 100644
index e229851649..0000000000
--- a/target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 0df592a0a1a3fff9133977192677aa915afc174f Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:08:49 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add clocks to APCS
-
-APCS now has support for providing the APSS clocks as the child device
-for IPQ8074.
-
-So, add the A53 PLL and XO clocks in order to use APCS as the CPU
-clocksource for APSS scaling.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220849.339732-4-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -680,6 +680,8 @@
- apcs_glb: mailbox@b111000 {
- compatible = "qcom,ipq8074-apcs-apps-global";
- reg = <0x0b111000 0x1000>;
-+ clocks = <&a53pll>, <&xo>;
-+ clock-names = "pll", "xo";
-
- #clock-cells = <1>;
- #mbox-cells = <1>;
diff --git a/target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch b/target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch
deleted file mode 100644
index 9162ea538d..0000000000
--- a/target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch
+++ /dev/null
@@ -1,3601 +0,0 @@
-From e6c5115d6845f25eda7e162dcd783a2044215867 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 30 Oct 2022 18:57:01 +0100
-Subject: [PATCH] clk: qcom: ipq8074: convert to parent data
-
-Convert the IPQ8074 GCC driver to use parent data instead of global
-name matching.
-
-Utilize ARRAY_SIZE for num_parents instead of hardcoding the value.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221030175703.1103224-1-robimarko@gmail.com
----
- drivers/clk/qcom/gcc-ipq8074.c | 1781 +++++++++++++++-----------------
- 1 file changed, 813 insertions(+), 968 deletions(-)
-
---- a/drivers/clk/qcom/gcc-ipq8074.c
-+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -49,349 +49,6 @@ enum {
- P_UNIPHY2_TX,
- };
-
--static const char * const gcc_xo_gpll0_gpll0_out_main_div2[] = {
-- "xo",
-- "gpll0",
-- "gpll0_out_main_div2",
--};
--
--static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0, 1 },
-- { P_GPLL0_DIV2, 4 },
--};
--
--static const struct parent_map gcc_xo_gpll0_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0, 1 },
--};
--
--static const char * const gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = {
-- "xo",
-- "gpll0",
-- "gpll2",
-- "gpll0_out_main_div2",
--};
--
--static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0, 1 },
-- { P_GPLL2, 2 },
-- { P_GPLL0_DIV2, 4 },
--};
--
--static const char * const gcc_xo_gpll0_sleep_clk[] = {
-- "xo",
-- "gpll0",
-- "sleep_clk",
--};
--
--static const struct parent_map gcc_xo_gpll0_sleep_clk_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0, 2 },
-- { P_SLEEP_CLK, 6 },
--};
--
--static const char * const gcc_xo_gpll6_gpll0_gpll0_out_main_div2[] = {
-- "xo",
-- "gpll6",
-- "gpll0",
-- "gpll0_out_main_div2",
--};
--
--static const struct parent_map gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map[] = {
-- { P_XO, 0 },
-- { P_GPLL6, 1 },
-- { P_GPLL0, 3 },
-- { P_GPLL0_DIV2, 4 },
--};
--
--static const char * const gcc_xo_gpll0_out_main_div2_gpll0[] = {
-- "xo",
-- "gpll0_out_main_div2",
-- "gpll0",
--};
--
--static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0_DIV2, 2 },
-- { P_GPLL0, 1 },
--};
--
--static const char * const gcc_usb3phy_0_cc_pipe_clk_xo[] = {
-- "usb3phy_0_cc_pipe_clk",
-- "xo",
--};
--
--static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = {
-- { P_USB3PHY_0_PIPE, 0 },
-- { P_XO, 2 },
--};
--
--static const char * const gcc_usb3phy_1_cc_pipe_clk_xo[] = {
-- "usb3phy_1_cc_pipe_clk",
-- "xo",
--};
--
--static const struct parent_map gcc_usb3phy_1_cc_pipe_clk_xo_map[] = {
-- { P_USB3PHY_1_PIPE, 0 },
-- { P_XO, 2 },
--};
--
--static const char * const gcc_pcie20_phy0_pipe_clk_xo[] = {
-- "pcie20_phy0_pipe_clk",
-- "xo",
--};
--
--static const struct parent_map gcc_pcie20_phy0_pipe_clk_xo_map[] = {
-- { P_PCIE20_PHY0_PIPE, 0 },
-- { P_XO, 2 },
--};
--
--static const char * const gcc_pcie20_phy1_pipe_clk_xo[] = {
-- "pcie20_phy1_pipe_clk",
-- "xo",
--};
--
--static const struct parent_map gcc_pcie20_phy1_pipe_clk_xo_map[] = {
-- { P_PCIE20_PHY1_PIPE, 0 },
-- { P_XO, 2 },
--};
--
--static const char * const gcc_xo_gpll0_gpll6_gpll0_div2[] = {
-- "xo",
-- "gpll0",
-- "gpll6",
-- "gpll0_out_main_div2",
--};
--
--static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_div2_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0, 1 },
-- { P_GPLL6, 2 },
-- { P_GPLL0_DIV2, 4 },
--};
--
--static const char * const gcc_xo_gpll0_gpll6_gpll0_out_main_div2[] = {
-- "xo",
-- "gpll0",
-- "gpll6",
-- "gpll0_out_main_div2",
--};
--
--static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0, 1 },
-- { P_GPLL6, 2 },
-- { P_GPLL0_DIV2, 3 },
--};
--
--static const char * const gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = {
-- "xo",
-- "bias_pll_nss_noc_clk",
-- "gpll0",
-- "gpll2",
--};
--
--static const struct parent_map gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map[] = {
-- { P_XO, 0 },
-- { P_BIAS_PLL_NSS_NOC, 1 },
-- { P_GPLL0, 2 },
-- { P_GPLL2, 3 },
--};
--
--static const char * const gcc_xo_nss_crypto_pll_gpll0[] = {
-- "xo",
-- "nss_crypto_pll",
-- "gpll0",
--};
--
--static const struct parent_map gcc_xo_nss_crypto_pll_gpll0_map[] = {
-- { P_XO, 0 },
-- { P_NSS_CRYPTO_PLL, 1 },
-- { P_GPLL0, 2 },
--};
--
--static const char * const gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6[] = {
-- "xo",
-- "ubi32_pll",
-- "gpll0",
-- "gpll2",
-- "gpll4",
-- "gpll6",
--};
--
--static const struct parent_map gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map[] = {
-- { P_XO, 0 },
-- { P_UBI32_PLL, 1 },
-- { P_GPLL0, 2 },
-- { P_GPLL2, 3 },
-- { P_GPLL4, 4 },
-- { P_GPLL6, 5 },
--};
--
--static const char * const gcc_xo_gpll0_out_main_div2[] = {
-- "xo",
-- "gpll0_out_main_div2",
--};
--
--static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0_DIV2, 1 },
--};
--
--static const char * const gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = {
-- "xo",
-- "bias_pll_cc_clk",
-- "gpll0",
-- "gpll4",
-- "nss_crypto_pll",
-- "ubi32_pll",
--};
--
--static const struct parent_map gcc_xo_bias_gpll0_gpll4_nss_ubi32_map[] = {
-- { P_XO, 0 },
-- { P_BIAS_PLL, 1 },
-- { P_GPLL0, 2 },
-- { P_GPLL4, 3 },
-- { P_NSS_CRYPTO_PLL, 4 },
-- { P_UBI32_PLL, 5 },
--};
--
--static const char * const gcc_xo_gpll0_gpll4[] = {
-- "xo",
-- "gpll0",
-- "gpll4",
--};
--
--static const struct parent_map gcc_xo_gpll0_gpll4_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0, 1 },
-- { P_GPLL4, 2 },
--};
--
--static const char * const gcc_xo_uniphy0_rx_tx_ubi32_bias[] = {
-- "xo",
-- "uniphy0_gcc_rx_clk",
-- "uniphy0_gcc_tx_clk",
-- "ubi32_pll",
-- "bias_pll_cc_clk",
--};
--
--static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = {
-- { P_XO, 0 },
-- { P_UNIPHY0_RX, 1 },
-- { P_UNIPHY0_TX, 2 },
-- { P_UBI32_PLL, 5 },
-- { P_BIAS_PLL, 6 },
--};
--
--static const char * const gcc_xo_uniphy0_tx_rx_ubi32_bias[] = {
-- "xo",
-- "uniphy0_gcc_tx_clk",
-- "uniphy0_gcc_rx_clk",
-- "ubi32_pll",
-- "bias_pll_cc_clk",
--};
--
--static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = {
-- { P_XO, 0 },
-- { P_UNIPHY0_TX, 1 },
-- { P_UNIPHY0_RX, 2 },
-- { P_UBI32_PLL, 5 },
-- { P_BIAS_PLL, 6 },
--};
--
--static const char * const gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = {
-- "xo",
-- "uniphy0_gcc_rx_clk",
-- "uniphy0_gcc_tx_clk",
-- "uniphy1_gcc_rx_clk",
-- "uniphy1_gcc_tx_clk",
-- "ubi32_pll",
-- "bias_pll_cc_clk",
--};
--
--static const struct parent_map
--gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map[] = {
-- { P_XO, 0 },
-- { P_UNIPHY0_RX, 1 },
-- { P_UNIPHY0_TX, 2 },
-- { P_UNIPHY1_RX, 3 },
-- { P_UNIPHY1_TX, 4 },
-- { P_UBI32_PLL, 5 },
-- { P_BIAS_PLL, 6 },
--};
--
--static const char * const gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = {
-- "xo",
-- "uniphy0_gcc_tx_clk",
-- "uniphy0_gcc_rx_clk",
-- "uniphy1_gcc_tx_clk",
-- "uniphy1_gcc_rx_clk",
-- "ubi32_pll",
-- "bias_pll_cc_clk",
--};
--
--static const struct parent_map
--gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map[] = {
-- { P_XO, 0 },
-- { P_UNIPHY0_TX, 1 },
-- { P_UNIPHY0_RX, 2 },
-- { P_UNIPHY1_TX, 3 },
-- { P_UNIPHY1_RX, 4 },
-- { P_UBI32_PLL, 5 },
-- { P_BIAS_PLL, 6 },
--};
--
--static const char * const gcc_xo_uniphy2_rx_tx_ubi32_bias[] = {
-- "xo",
-- "uniphy2_gcc_rx_clk",
-- "uniphy2_gcc_tx_clk",
-- "ubi32_pll",
-- "bias_pll_cc_clk",
--};
--
--static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = {
-- { P_XO, 0 },
-- { P_UNIPHY2_RX, 1 },
-- { P_UNIPHY2_TX, 2 },
-- { P_UBI32_PLL, 5 },
-- { P_BIAS_PLL, 6 },
--};
--
--static const char * const gcc_xo_uniphy2_tx_rx_ubi32_bias[] = {
-- "xo",
-- "uniphy2_gcc_tx_clk",
-- "uniphy2_gcc_rx_clk",
-- "ubi32_pll",
-- "bias_pll_cc_clk",
--};
--
--static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = {
-- { P_XO, 0 },
-- { P_UNIPHY2_TX, 1 },
-- { P_UNIPHY2_RX, 2 },
-- { P_UBI32_PLL, 5 },
-- { P_BIAS_PLL, 6 },
--};
--
--static const char * const gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = {
-- "xo",
-- "gpll0",
-- "gpll6",
-- "gpll0_out_main_div2",
-- "sleep_clk",
--};
--
--static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = {
-- { P_XO, 0 },
-- { P_GPLL0, 1 },
-- { P_GPLL6, 2 },
-- { P_GPLL0_DIV2, 4 },
-- { P_SLEEP_CLK, 6 },
--};
--
- static struct clk_alpha_pll gpll0_main = {
- .offset = 0x21000,
- .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
-@@ -400,8 +57,9 @@ static struct clk_alpha_pll gpll0_main =
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpll0_main",
-- .parent_names = (const char *[]){
-- "xo"
-+ .parent_data = &(const struct clk_parent_data){
-+ .fw_name = "xo",
-+ .name = "xo",
- },
- .num_parents = 1,
- .ops = &clk_alpha_pll_ops,
-@@ -414,9 +72,8 @@ static struct clk_fixed_factor gpll0_out
- .div = 2,
- .hw.init = &(struct clk_init_data){
- .name = "gpll0_out_main_div2",
-- .parent_names = (const char *[]){
-- "gpll0_main"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gpll0_main.clkr.hw },
- .num_parents = 1,
- .ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -429,9 +86,8 @@ static struct clk_alpha_pll_postdiv gpll
- .width = 4,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gpll0",
-- .parent_names = (const char *[]){
-- "gpll0_main"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gpll0_main.clkr.hw },
- .num_parents = 1,
- .ops = &clk_alpha_pll_postdiv_ro_ops,
- },
-@@ -445,8 +101,9 @@ static struct clk_alpha_pll gpll2_main =
- .enable_mask = BIT(2),
- .hw.init = &(struct clk_init_data){
- .name = "gpll2_main",
-- .parent_names = (const char *[]){
-- "xo"
-+ .parent_data = &(const struct clk_parent_data){
-+ .fw_name = "xo",
-+ .name = "xo",
- },
- .num_parents = 1,
- .ops = &clk_alpha_pll_ops,
-@@ -461,9 +118,8 @@ static struct clk_alpha_pll_postdiv gpll
- .width = 4,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gpll2",
-- .parent_names = (const char *[]){
-- "gpll2_main"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gpll2_main.clkr.hw },
- .num_parents = 1,
- .ops = &clk_alpha_pll_postdiv_ro_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -478,8 +134,9 @@ static struct clk_alpha_pll gpll4_main =
- .enable_mask = BIT(5),
- .hw.init = &(struct clk_init_data){
- .name = "gpll4_main",
-- .parent_names = (const char *[]){
-- "xo"
-+ .parent_data = &(const struct clk_parent_data){
-+ .fw_name = "xo",
-+ .name = "xo",
- },
- .num_parents = 1,
- .ops = &clk_alpha_pll_ops,
-@@ -494,9 +151,8 @@ static struct clk_alpha_pll_postdiv gpll
- .width = 4,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gpll4",
-- .parent_names = (const char *[]){
-- "gpll4_main"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gpll4_main.clkr.hw },
- .num_parents = 1,
- .ops = &clk_alpha_pll_postdiv_ro_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -512,8 +168,9 @@ static struct clk_alpha_pll gpll6_main =
- .enable_mask = BIT(7),
- .hw.init = &(struct clk_init_data){
- .name = "gpll6_main",
-- .parent_names = (const char *[]){
-- "xo"
-+ .parent_data = &(const struct clk_parent_data){
-+ .fw_name = "xo",
-+ .name = "xo",
- },
- .num_parents = 1,
- .ops = &clk_alpha_pll_ops,
-@@ -528,9 +185,8 @@ static struct clk_alpha_pll_postdiv gpll
- .width = 2,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gpll6",
-- .parent_names = (const char *[]){
-- "gpll6_main"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gpll6_main.clkr.hw },
- .num_parents = 1,
- .ops = &clk_alpha_pll_postdiv_ro_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -542,9 +198,8 @@ static struct clk_fixed_factor gpll6_out
- .div = 2,
- .hw.init = &(struct clk_init_data){
- .name = "gpll6_out_main_div2",
-- .parent_names = (const char *[]){
-- "gpll6_main"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gpll6_main.clkr.hw },
- .num_parents = 1,
- .ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -560,8 +215,9 @@ static struct clk_alpha_pll ubi32_pll_ma
- .enable_mask = BIT(6),
- .hw.init = &(struct clk_init_data){
- .name = "ubi32_pll_main",
-- .parent_names = (const char *[]){
-- "xo"
-+ .parent_data = &(const struct clk_parent_data){
-+ .fw_name = "xo",
-+ .name = "xo",
- },
- .num_parents = 1,
- .ops = &clk_alpha_pll_huayra_ops,
-@@ -575,9 +231,8 @@ static struct clk_alpha_pll_postdiv ubi3
- .width = 2,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "ubi32_pll",
-- .parent_names = (const char *[]){
-- "ubi32_pll_main"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &ubi32_pll_main.clkr.hw },
- .num_parents = 1,
- .ops = &clk_alpha_pll_postdiv_ro_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -592,8 +247,9 @@ static struct clk_alpha_pll nss_crypto_p
- .enable_mask = BIT(4),
- .hw.init = &(struct clk_init_data){
- .name = "nss_crypto_pll_main",
-- .parent_names = (const char *[]){
-- "xo"
-+ .parent_data = &(const struct clk_parent_data){
-+ .fw_name = "xo",
-+ .name = "xo",
- },
- .num_parents = 1,
- .ops = &clk_alpha_pll_ops,
-@@ -607,9 +263,8 @@ static struct clk_alpha_pll_postdiv nss_
- .width = 4,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_crypto_pll",
-- .parent_names = (const char *[]){
-- "nss_crypto_pll_main"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_crypto_pll_main.clkr.hw },
- .num_parents = 1,
- .ops = &clk_alpha_pll_postdiv_ro_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -623,6 +278,18 @@ static const struct freq_tbl ftbl_pcnoc_
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll0.clkr.hw},
-+ { .hw = &gpll0_out_main_div2.hw},
-+};
-+
-+static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0, 1 },
-+ { P_GPLL0_DIV2, 4 },
-+};
-+
- static struct clk_rcg2 pcnoc_bfdcd_clk_src = {
- .cmd_rcgr = 0x27000,
- .freq_tbl = ftbl_pcnoc_bfdcd_clk_src,
-@@ -630,8 +297,8 @@ static struct clk_rcg2 pcnoc_bfdcd_clk_s
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "pcnoc_bfdcd_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- .flags = CLK_IS_CRITICAL,
- },
-@@ -642,9 +309,8 @@ static struct clk_fixed_factor pcnoc_clk
- .div = 1,
- .hw.init = &(struct clk_init_data){
- .name = "pcnoc_clk_src",
-- .parent_names = (const char *[]){
-- "pcnoc_bfdcd_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_bfdcd_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -658,8 +324,9 @@ static struct clk_branch gcc_sleep_clk_s
- .enable_mask = BIT(1),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sleep_clk_src",
-- .parent_names = (const char *[]){
-- "sleep_clk"
-+ .parent_data = &(const struct clk_parent_data){
-+ .fw_name = "sleep_clk",
-+ .name = "sleep_clk",
- },
- .num_parents = 1,
- .ops = &clk_branch2_ops,
-@@ -682,8 +349,8 @@ static struct clk_rcg2 blsp1_qup1_i2c_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup1_i2c_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -708,8 +375,8 @@ static struct clk_rcg2 blsp1_qup1_spi_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup1_spi_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -721,8 +388,8 @@ static struct clk_rcg2 blsp1_qup2_i2c_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup2_i2c_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -735,8 +402,8 @@ static struct clk_rcg2 blsp1_qup2_spi_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup2_spi_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -748,8 +415,8 @@ static struct clk_rcg2 blsp1_qup3_i2c_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup3_i2c_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -762,8 +429,8 @@ static struct clk_rcg2 blsp1_qup3_spi_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup3_spi_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -775,8 +442,8 @@ static struct clk_rcg2 blsp1_qup4_i2c_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup4_i2c_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -789,8 +456,8 @@ static struct clk_rcg2 blsp1_qup4_spi_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup4_spi_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -802,8 +469,8 @@ static struct clk_rcg2 blsp1_qup5_i2c_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup5_i2c_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -816,8 +483,8 @@ static struct clk_rcg2 blsp1_qup5_spi_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup5_spi_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -829,8 +496,8 @@ static struct clk_rcg2 blsp1_qup6_i2c_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup6_i2c_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -843,8 +510,8 @@ static struct clk_rcg2 blsp1_qup6_spi_ap
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_qup6_spi_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -877,8 +544,8 @@ static struct clk_rcg2 blsp1_uart1_apps_
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_uart1_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -891,8 +558,8 @@ static struct clk_rcg2 blsp1_uart2_apps_
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_uart2_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -905,8 +572,8 @@ static struct clk_rcg2 blsp1_uart3_apps_
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_uart3_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -919,8 +586,8 @@ static struct clk_rcg2 blsp1_uart4_apps_
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_uart4_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -933,8 +600,8 @@ static struct clk_rcg2 blsp1_uart5_apps_
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_uart5_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -947,8 +614,8 @@ static struct clk_rcg2 blsp1_uart6_apps_
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "blsp1_uart6_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -958,6 +625,11 @@ static const struct clk_parent_data gcc_
- { .hw = &gpll0.clkr.hw },
- };
-
-+static const struct parent_map gcc_xo_gpll0_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0, 1 },
-+};
-+
- static const struct freq_tbl ftbl_pcie_axi_clk_src[] = {
- F(19200000, P_XO, 1, 0, 0),
- F(200000000, P_GPLL0, 4, 0, 0),
-@@ -972,7 +644,7 @@ static struct clk_rcg2 pcie0_axi_clk_src
- .clkr.hw.init = &(struct clk_init_data){
- .name = "pcie0_axi_clk_src",
- .parent_data = gcc_xo_gpll0,
-- .num_parents = 2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -981,6 +653,18 @@ static const struct freq_tbl ftbl_pcie_a
- F(19200000, P_XO, 1, 0, 0),
- };
-
-+static const struct clk_parent_data gcc_xo_gpll0_sleep_clk[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll0.clkr.hw },
-+ { .fw_name = "sleep_clk", .name = "sleep_clk" },
-+};
-+
-+static const struct parent_map gcc_xo_gpll0_sleep_clk_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0, 2 },
-+ { P_SLEEP_CLK, 6 },
-+};
-+
- static struct clk_rcg2 pcie0_aux_clk_src = {
- .cmd_rcgr = 0x75024,
- .freq_tbl = ftbl_pcie_aux_clk_src,
-@@ -989,12 +673,22 @@ static struct clk_rcg2 pcie0_aux_clk_src
- .parent_map = gcc_xo_gpll0_sleep_clk_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "pcie0_aux_clk_src",
-- .parent_names = gcc_xo_gpll0_sleep_clk,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_sleep_clk,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk),
- .ops = &clk_rcg2_ops,
- },
- };
-
-+static const struct clk_parent_data gcc_pcie20_phy0_pipe_clk_xo[] = {
-+ { .name = "pcie20_phy0_pipe_clk" },
-+ { .fw_name = "xo", .name = "xo" },
-+};
-+
-+static const struct parent_map gcc_pcie20_phy0_pipe_clk_xo_map[] = {
-+ { P_PCIE20_PHY0_PIPE, 0 },
-+ { P_XO, 2 },
-+};
-+
- static struct clk_regmap_mux pcie0_pipe_clk_src = {
- .reg = 0x7501c,
- .shift = 8,
-@@ -1003,8 +697,8 @@ static struct clk_regmap_mux pcie0_pipe_
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "pcie0_pipe_clk_src",
-- .parent_names = gcc_pcie20_phy0_pipe_clk_xo,
-- .num_parents = 2,
-+ .parent_data = gcc_pcie20_phy0_pipe_clk_xo,
-+ .num_parents = ARRAY_SIZE(gcc_pcie20_phy0_pipe_clk_xo),
- .ops = &clk_regmap_mux_closest_ops,
- .flags = CLK_SET_RATE_PARENT,
- },
-@@ -1019,7 +713,7 @@ static struct clk_rcg2 pcie1_axi_clk_src
- .clkr.hw.init = &(struct clk_init_data){
- .name = "pcie1_axi_clk_src",
- .parent_data = gcc_xo_gpll0,
-- .num_parents = 2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1032,12 +726,22 @@ static struct clk_rcg2 pcie1_aux_clk_src
- .parent_map = gcc_xo_gpll0_sleep_clk_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "pcie1_aux_clk_src",
-- .parent_names = gcc_xo_gpll0_sleep_clk,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_sleep_clk,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk),
- .ops = &clk_rcg2_ops,
- },
- };
-
-+static const struct clk_parent_data gcc_pcie20_phy1_pipe_clk_xo[] = {
-+ { .name = "pcie20_phy1_pipe_clk" },
-+ { .fw_name = "xo", .name = "xo" },
-+};
-+
-+static const struct parent_map gcc_pcie20_phy1_pipe_clk_xo_map[] = {
-+ { P_PCIE20_PHY1_PIPE, 0 },
-+ { P_XO, 2 },
-+};
-+
- static struct clk_regmap_mux pcie1_pipe_clk_src = {
- .reg = 0x7601c,
- .shift = 8,
-@@ -1046,8 +750,8 @@ static struct clk_regmap_mux pcie1_pipe_
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "pcie1_pipe_clk_src",
-- .parent_names = gcc_pcie20_phy1_pipe_clk_xo,
-- .num_parents = 2,
-+ .parent_data = gcc_pcie20_phy1_pipe_clk_xo,
-+ .num_parents = ARRAY_SIZE(gcc_pcie20_phy1_pipe_clk_xo),
- .ops = &clk_regmap_mux_closest_ops,
- .flags = CLK_SET_RATE_PARENT,
- },
-@@ -1066,6 +770,20 @@ static const struct freq_tbl ftbl_sdcc_a
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll0.clkr.hw },
-+ { .hw = &gpll2.clkr.hw },
-+ { .hw = &gpll0_out_main_div2.hw },
-+};
-+
-+static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0, 1 },
-+ { P_GPLL2, 2 },
-+ { P_GPLL0_DIV2, 4 },
-+};
-+
- static struct clk_rcg2 sdcc1_apps_clk_src = {
- .cmd_rcgr = 0x42004,
- .freq_tbl = ftbl_sdcc_apps_clk_src,
-@@ -1074,8 +792,8 @@ static struct clk_rcg2 sdcc1_apps_clk_sr
- .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "sdcc1_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2,
-- .num_parents = 4,
-+ .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll0_out_main_div2),
- .ops = &clk_rcg2_floor_ops,
- },
- };
-@@ -1086,6 +804,20 @@ static const struct freq_tbl ftbl_sdcc_i
- F(308570000, P_GPLL6, 3.5, 0, 0),
- };
-
-+static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_div2[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll0.clkr.hw },
-+ { .hw = &gpll6.clkr.hw },
-+ { .hw = &gpll0_out_main_div2.hw },
-+};
-+
-+static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_div2_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0, 1 },
-+ { P_GPLL6, 2 },
-+ { P_GPLL0_DIV2, 4 },
-+};
-+
- static struct clk_rcg2 sdcc1_ice_core_clk_src = {
- .cmd_rcgr = 0x5d000,
- .freq_tbl = ftbl_sdcc_ice_core_clk_src,
-@@ -1094,8 +826,8 @@ static struct clk_rcg2 sdcc1_ice_core_cl
- .parent_map = gcc_xo_gpll0_gpll6_gpll0_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "sdcc1_ice_core_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll6_gpll0_div2,
-- .num_parents = 4,
-+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1108,8 +840,8 @@ static struct clk_rcg2 sdcc2_apps_clk_sr
- .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "sdcc2_apps_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2,
-- .num_parents = 4,
-+ .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll0_out_main_div2),
- .ops = &clk_rcg2_floor_ops,
- },
- };
-@@ -1121,6 +853,18 @@ static const struct freq_tbl ftbl_usb_ma
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_gpll0_out_main_div2_gpll0[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll0_out_main_div2.hw },
-+ { .hw = &gpll0.clkr.hw },
-+};
-+
-+static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0_DIV2, 2 },
-+ { P_GPLL0, 1 },
-+};
-+
- static struct clk_rcg2 usb0_master_clk_src = {
- .cmd_rcgr = 0x3e00c,
- .freq_tbl = ftbl_usb_master_clk_src,
-@@ -1129,8 +873,8 @@ static struct clk_rcg2 usb0_master_clk_s
- .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "usb0_master_clk_src",
-- .parent_names = gcc_xo_gpll0_out_main_div2_gpll0,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_out_main_div2_gpll0,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2_gpll0),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1148,8 +892,8 @@ static struct clk_rcg2 usb0_aux_clk_src
- .parent_map = gcc_xo_gpll0_sleep_clk_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "usb0_aux_clk_src",
-- .parent_names = gcc_xo_gpll0_sleep_clk,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_sleep_clk,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1161,6 +905,20 @@ static const struct freq_tbl ftbl_usb_mo
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_gpll6_gpll0_gpll0_out_main_div2[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll6.clkr.hw },
-+ { .hw = &gpll0.clkr.hw },
-+ { .hw = &gpll0_out_main_div2.hw },
-+};
-+
-+static const struct parent_map gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL6, 1 },
-+ { P_GPLL0, 3 },
-+ { P_GPLL0_DIV2, 4 },
-+};
-+
- static struct clk_rcg2 usb0_mock_utmi_clk_src = {
- .cmd_rcgr = 0x3e020,
- .freq_tbl = ftbl_usb_mock_utmi_clk_src,
-@@ -1169,12 +927,22 @@ static struct clk_rcg2 usb0_mock_utmi_cl
- .parent_map = gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "usb0_mock_utmi_clk_src",
-- .parent_names = gcc_xo_gpll6_gpll0_gpll0_out_main_div2,
-- .num_parents = 4,
-+ .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll6_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-
-+static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = {
-+ { .name = "usb3phy_0_cc_pipe_clk" },
-+ { .fw_name = "xo", .name = "xo" },
-+};
-+
-+static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = {
-+ { P_USB3PHY_0_PIPE, 0 },
-+ { P_XO, 2 },
-+};
-+
- static struct clk_regmap_mux usb0_pipe_clk_src = {
- .reg = 0x3e048,
- .shift = 8,
-@@ -1183,8 +951,8 @@ static struct clk_regmap_mux usb0_pipe_c
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "usb0_pipe_clk_src",
-- .parent_names = gcc_usb3phy_0_cc_pipe_clk_xo,
-- .num_parents = 2,
-+ .parent_data = gcc_usb3phy_0_cc_pipe_clk_xo,
-+ .num_parents = ARRAY_SIZE(gcc_usb3phy_0_cc_pipe_clk_xo),
- .ops = &clk_regmap_mux_closest_ops,
- .flags = CLK_SET_RATE_PARENT,
- },
-@@ -1199,8 +967,8 @@ static struct clk_rcg2 usb1_master_clk_s
- .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "usb1_master_clk_src",
-- .parent_names = gcc_xo_gpll0_out_main_div2_gpll0,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_out_main_div2_gpll0,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2_gpll0),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1213,8 +981,8 @@ static struct clk_rcg2 usb1_aux_clk_src
- .parent_map = gcc_xo_gpll0_sleep_clk_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "usb1_aux_clk_src",
-- .parent_names = gcc_xo_gpll0_sleep_clk,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_sleep_clk,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1227,12 +995,22 @@ static struct clk_rcg2 usb1_mock_utmi_cl
- .parent_map = gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "usb1_mock_utmi_clk_src",
-- .parent_names = gcc_xo_gpll6_gpll0_gpll0_out_main_div2,
-- .num_parents = 4,
-+ .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll6_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-
-+static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = {
-+ { .name = "usb3phy_1_cc_pipe_clk" },
-+ { .fw_name = "xo", .name = "xo" },
-+};
-+
-+static const struct parent_map gcc_usb3phy_1_cc_pipe_clk_xo_map[] = {
-+ { P_USB3PHY_1_PIPE, 0 },
-+ { P_XO, 2 },
-+};
-+
- static struct clk_regmap_mux usb1_pipe_clk_src = {
- .reg = 0x3f048,
- .shift = 8,
-@@ -1241,8 +1019,8 @@ static struct clk_regmap_mux usb1_pipe_c
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "usb1_pipe_clk_src",
-- .parent_names = gcc_usb3phy_1_cc_pipe_clk_xo,
-- .num_parents = 2,
-+ .parent_data = gcc_usb3phy_1_cc_pipe_clk_xo,
-+ .num_parents = ARRAY_SIZE(gcc_usb3phy_1_cc_pipe_clk_xo),
- .ops = &clk_regmap_mux_closest_ops,
- .flags = CLK_SET_RATE_PARENT,
- },
-@@ -1256,8 +1034,9 @@ static struct clk_branch gcc_xo_clk_src
- .enable_mask = BIT(1),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_xo_clk_src",
-- .parent_names = (const char *[]){
-- "xo"
-+ .parent_data = &(const struct clk_parent_data){
-+ .fw_name = "xo",
-+ .name = "xo",
- },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
-@@ -1271,9 +1050,8 @@ static struct clk_fixed_factor gcc_xo_di
- .div = 4,
- .hw.init = &(struct clk_init_data){
- .name = "gcc_xo_div4_clk_src",
-- .parent_names = (const char *[]){
-- "gcc_xo_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gcc_xo_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1291,6 +1069,20 @@ static const struct freq_tbl ftbl_system
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_out_main_div2[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll0.clkr.hw },
-+ { .hw = &gpll6.clkr.hw },
-+ { .hw = &gpll0_out_main_div2.hw },
-+};
-+
-+static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0, 1 },
-+ { P_GPLL6, 2 },
-+ { P_GPLL0_DIV2, 3 },
-+};
-+
- static struct clk_rcg2 system_noc_bfdcd_clk_src = {
- .cmd_rcgr = 0x26004,
- .freq_tbl = ftbl_system_noc_bfdcd_clk_src,
-@@ -1298,8 +1090,8 @@ static struct clk_rcg2 system_noc_bfdcd_
- .parent_map = gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "system_noc_bfdcd_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll6_gpll0_out_main_div2,
-- .num_parents = 4,
-+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- .flags = CLK_IS_CRITICAL,
- },
-@@ -1310,9 +1102,8 @@ static struct clk_fixed_factor system_no
- .div = 1,
- .hw.init = &(struct clk_init_data){
- .name = "system_noc_clk_src",
-- .parent_names = (const char *[]){
-- "system_noc_bfdcd_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &system_noc_bfdcd_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1333,7 +1124,7 @@ static struct clk_rcg2 nss_ce_clk_src =
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_ce_clk_src",
- .parent_data = gcc_xo_gpll0,
-- .num_parents = 2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1344,6 +1135,20 @@ static const struct freq_tbl ftbl_nss_no
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .name = "bias_pll_nss_noc_clk" },
-+ { .hw = &gpll0.clkr.hw },
-+ { .hw = &gpll2.clkr.hw },
-+};
-+
-+static const struct parent_map gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map[] = {
-+ { P_XO, 0 },
-+ { P_BIAS_PLL_NSS_NOC, 1 },
-+ { P_GPLL0, 2 },
-+ { P_GPLL2, 3 },
-+};
-+
- static struct clk_rcg2 nss_noc_bfdcd_clk_src = {
- .cmd_rcgr = 0x68088,
- .freq_tbl = ftbl_nss_noc_bfdcd_clk_src,
-@@ -1351,8 +1156,8 @@ static struct clk_rcg2 nss_noc_bfdcd_clk
- .parent_map = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_noc_bfdcd_clk_src",
-- .parent_names = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2,
-- .num_parents = 4,
-+ .parent_data = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1362,9 +1167,8 @@ static struct clk_fixed_factor nss_noc_c
- .div = 1,
- .hw.init = &(struct clk_init_data){
- .name = "nss_noc_clk_src",
-- .parent_names = (const char *[]){
-- "nss_noc_bfdcd_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_noc_bfdcd_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1377,6 +1181,18 @@ static const struct freq_tbl ftbl_nss_cr
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_nss_crypto_pll_gpll0[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &nss_crypto_pll.clkr.hw },
-+ { .hw = &gpll0.clkr.hw },
-+};
-+
-+static const struct parent_map gcc_xo_nss_crypto_pll_gpll0_map[] = {
-+ { P_XO, 0 },
-+ { P_NSS_CRYPTO_PLL, 1 },
-+ { P_GPLL0, 2 },
-+};
-+
- static struct clk_rcg2 nss_crypto_clk_src = {
- .cmd_rcgr = 0x68144,
- .freq_tbl = ftbl_nss_crypto_clk_src,
-@@ -1385,8 +1201,8 @@ static struct clk_rcg2 nss_crypto_clk_sr
- .parent_map = gcc_xo_nss_crypto_pll_gpll0_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_crypto_clk_src",
-- .parent_names = gcc_xo_nss_crypto_pll_gpll0,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_nss_crypto_pll_gpll0,
-+ .num_parents = ARRAY_SIZE(gcc_xo_nss_crypto_pll_gpll0),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1400,6 +1216,24 @@ static const struct freq_tbl ftbl_nss_ub
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &ubi32_pll.clkr.hw },
-+ { .hw = &gpll0.clkr.hw },
-+ { .hw = &gpll2.clkr.hw },
-+ { .hw = &gpll4.clkr.hw },
-+ { .hw = &gpll6.clkr.hw },
-+};
-+
-+static const struct parent_map gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map[] = {
-+ { P_XO, 0 },
-+ { P_UBI32_PLL, 1 },
-+ { P_GPLL0, 2 },
-+ { P_GPLL2, 3 },
-+ { P_GPLL4, 4 },
-+ { P_GPLL6, 5 },
-+};
-+
- static struct clk_rcg2 nss_ubi0_clk_src = {
- .cmd_rcgr = 0x68104,
- .freq_tbl = ftbl_nss_ubi_clk_src,
-@@ -1407,8 +1241,8 @@ static struct clk_rcg2 nss_ubi0_clk_src
- .parent_map = gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_ubi0_clk_src",
-- .parent_names = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6,
-- .num_parents = 6,
-+ .parent_data = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6,
-+ .num_parents = ARRAY_SIZE(gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6),
- .ops = &clk_rcg2_ops,
- .flags = CLK_SET_RATE_PARENT,
- },
-@@ -1421,9 +1255,8 @@ static struct clk_regmap_div nss_ubi0_di
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_ubi0_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_ubi0_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ubi0_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ro_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1438,8 +1271,8 @@ static struct clk_rcg2 nss_ubi1_clk_src
- .parent_map = gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_ubi1_clk_src",
-- .parent_names = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6,
-- .num_parents = 6,
-+ .parent_data = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6,
-+ .num_parents = ARRAY_SIZE(gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6),
- .ops = &clk_rcg2_ops,
- .flags = CLK_SET_RATE_PARENT,
- },
-@@ -1452,9 +1285,8 @@ static struct clk_regmap_div nss_ubi1_di
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_ubi1_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_ubi1_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ubi1_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ro_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1468,6 +1300,16 @@ static const struct freq_tbl ftbl_ubi_mp
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_gpll0_out_main_div2[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll0_out_main_div2.hw },
-+};
-+
-+static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0_DIV2, 1 },
-+};
-+
- static struct clk_rcg2 ubi_mpt_clk_src = {
- .cmd_rcgr = 0x68090,
- .freq_tbl = ftbl_ubi_mpt_clk_src,
-@@ -1475,8 +1317,8 @@ static struct clk_rcg2 ubi_mpt_clk_src =
- .parent_map = gcc_xo_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "ubi_mpt_clk_src",
-- .parent_names = gcc_xo_gpll0_out_main_div2,
-- .num_parents = 2,
-+ .parent_data = gcc_xo_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1487,6 +1329,18 @@ static const struct freq_tbl ftbl_nss_im
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll0.clkr.hw },
-+ { .hw = &gpll4.clkr.hw },
-+};
-+
-+static const struct parent_map gcc_xo_gpll0_gpll4_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0, 1 },
-+ { P_GPLL4, 2 },
-+};
-+
- static struct clk_rcg2 nss_imem_clk_src = {
- .cmd_rcgr = 0x68158,
- .freq_tbl = ftbl_nss_imem_clk_src,
-@@ -1494,8 +1348,8 @@ static struct clk_rcg2 nss_imem_clk_src
- .parent_map = gcc_xo_gpll0_gpll4_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_imem_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll4,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll4,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1506,6 +1360,24 @@ static const struct freq_tbl ftbl_nss_pp
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .name = "bias_pll_cc_clk" },
-+ { .hw = &gpll0.clkr.hw },
-+ { .hw = &gpll4.clkr.hw },
-+ { .hw = &nss_crypto_pll.clkr.hw },
-+ { .hw = &ubi32_pll.clkr.hw },
-+};
-+
-+static const struct parent_map gcc_xo_bias_gpll0_gpll4_nss_ubi32_map[] = {
-+ { P_XO, 0 },
-+ { P_BIAS_PLL, 1 },
-+ { P_GPLL0, 2 },
-+ { P_GPLL4, 3 },
-+ { P_NSS_CRYPTO_PLL, 4 },
-+ { P_UBI32_PLL, 5 },
-+};
-+
- static struct clk_rcg2 nss_ppe_clk_src = {
- .cmd_rcgr = 0x68080,
- .freq_tbl = ftbl_nss_ppe_clk_src,
-@@ -1513,8 +1385,8 @@ static struct clk_rcg2 nss_ppe_clk_src =
- .parent_map = gcc_xo_bias_gpll0_gpll4_nss_ubi32_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_ppe_clk_src",
-- .parent_names = gcc_xo_bias_gpll0_gpll4_nss_ubi32,
-- .num_parents = 6,
-+ .parent_data = gcc_xo_bias_gpll0_gpll4_nss_ubi32,
-+ .num_parents = ARRAY_SIZE(gcc_xo_bias_gpll0_gpll4_nss_ubi32),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1524,9 +1396,8 @@ static struct clk_fixed_factor nss_ppe_c
- .div = 4,
- .hw.init = &(struct clk_init_data){
- .name = "nss_ppe_cdiv_clk_src",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1540,6 +1411,22 @@ static const struct freq_tbl ftbl_nss_po
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_ubi32_bias[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .name = "uniphy0_gcc_rx_clk" },
-+ { .name = "uniphy0_gcc_tx_clk" },
-+ { .hw = &ubi32_pll.clkr.hw },
-+ { .name = "bias_pll_cc_clk" },
-+};
-+
-+static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = {
-+ { P_XO, 0 },
-+ { P_UNIPHY0_RX, 1 },
-+ { P_UNIPHY0_TX, 2 },
-+ { P_UBI32_PLL, 5 },
-+ { P_BIAS_PLL, 6 },
-+};
-+
- static struct clk_rcg2 nss_port1_rx_clk_src = {
- .cmd_rcgr = 0x68020,
- .freq_tbl = ftbl_nss_port1_rx_clk_src,
-@@ -1547,8 +1434,8 @@ static struct clk_rcg2 nss_port1_rx_clk_
- .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port1_rx_clk_src",
-- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1560,9 +1447,8 @@ static struct clk_regmap_div nss_port1_r
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port1_rx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port1_rx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port1_rx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1577,6 +1463,22 @@ static const struct freq_tbl ftbl_nss_po
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_ubi32_bias[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .name = "uniphy0_gcc_tx_clk" },
-+ { .name = "uniphy0_gcc_rx_clk" },
-+ { .hw = &ubi32_pll.clkr.hw },
-+ { .name = "bias_pll_cc_clk" },
-+};
-+
-+static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = {
-+ { P_XO, 0 },
-+ { P_UNIPHY0_TX, 1 },
-+ { P_UNIPHY0_RX, 2 },
-+ { P_UBI32_PLL, 5 },
-+ { P_BIAS_PLL, 6 },
-+};
-+
- static struct clk_rcg2 nss_port1_tx_clk_src = {
- .cmd_rcgr = 0x68028,
- .freq_tbl = ftbl_nss_port1_tx_clk_src,
-@@ -1584,8 +1486,8 @@ static struct clk_rcg2 nss_port1_tx_clk_
- .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port1_tx_clk_src",
-- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1597,9 +1499,8 @@ static struct clk_regmap_div nss_port1_t
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port1_tx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port1_tx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port1_tx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1614,8 +1515,8 @@ static struct clk_rcg2 nss_port2_rx_clk_
- .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port2_rx_clk_src",
-- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1627,9 +1528,8 @@ static struct clk_regmap_div nss_port2_r
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port2_rx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port2_rx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port2_rx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1644,8 +1544,8 @@ static struct clk_rcg2 nss_port2_tx_clk_
- .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port2_tx_clk_src",
-- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1657,9 +1557,8 @@ static struct clk_regmap_div nss_port2_t
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port2_tx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port2_tx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port2_tx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1674,8 +1573,8 @@ static struct clk_rcg2 nss_port3_rx_clk_
- .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port3_rx_clk_src",
-- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1687,9 +1586,8 @@ static struct clk_regmap_div nss_port3_r
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port3_rx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port3_rx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port3_rx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1704,8 +1602,8 @@ static struct clk_rcg2 nss_port3_tx_clk_
- .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port3_tx_clk_src",
-- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1717,9 +1615,8 @@ static struct clk_regmap_div nss_port3_t
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port3_tx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port3_tx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port3_tx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1734,8 +1631,8 @@ static struct clk_rcg2 nss_port4_rx_clk_
- .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port4_rx_clk_src",
-- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1747,9 +1644,8 @@ static struct clk_regmap_div nss_port4_r
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port4_rx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port4_rx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port4_rx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1764,8 +1660,8 @@ static struct clk_rcg2 nss_port4_tx_clk_
- .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port4_tx_clk_src",
-- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1777,9 +1673,8 @@ static struct clk_regmap_div nss_port4_t
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port4_tx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port4_tx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port4_tx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1799,6 +1694,27 @@ static const struct freq_tbl ftbl_nss_po
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .name = "uniphy0_gcc_rx_clk" },
-+ { .name = "uniphy0_gcc_tx_clk" },
-+ { .name = "uniphy1_gcc_rx_clk" },
-+ { .name = "uniphy1_gcc_tx_clk" },
-+ { .hw = &ubi32_pll.clkr.hw },
-+ { .name = "bias_pll_cc_clk" },
-+};
-+
-+static const struct parent_map
-+gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map[] = {
-+ { P_XO, 0 },
-+ { P_UNIPHY0_RX, 1 },
-+ { P_UNIPHY0_TX, 2 },
-+ { P_UNIPHY1_RX, 3 },
-+ { P_UNIPHY1_TX, 4 },
-+ { P_UBI32_PLL, 5 },
-+ { P_BIAS_PLL, 6 },
-+};
-+
- static struct clk_rcg2 nss_port5_rx_clk_src = {
- .cmd_rcgr = 0x68060,
- .freq_tbl = ftbl_nss_port5_rx_clk_src,
-@@ -1806,8 +1722,8 @@ static struct clk_rcg2 nss_port5_rx_clk_
- .parent_map = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port5_rx_clk_src",
-- .parent_names = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias,
-- .num_parents = 7,
-+ .parent_data = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1819,9 +1735,8 @@ static struct clk_regmap_div nss_port5_r
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port5_rx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port5_rx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port5_rx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1841,6 +1756,27 @@ static const struct freq_tbl ftbl_nss_po
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .name = "uniphy0_gcc_tx_clk" },
-+ { .name = "uniphy0_gcc_rx_clk" },
-+ { .name = "uniphy1_gcc_tx_clk" },
-+ { .name = "uniphy1_gcc_rx_clk" },
-+ { .hw = &ubi32_pll.clkr.hw },
-+ { .name = "bias_pll_cc_clk" },
-+};
-+
-+static const struct parent_map
-+gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map[] = {
-+ { P_XO, 0 },
-+ { P_UNIPHY0_TX, 1 },
-+ { P_UNIPHY0_RX, 2 },
-+ { P_UNIPHY1_TX, 3 },
-+ { P_UNIPHY1_RX, 4 },
-+ { P_UBI32_PLL, 5 },
-+ { P_BIAS_PLL, 6 },
-+};
-+
- static struct clk_rcg2 nss_port5_tx_clk_src = {
- .cmd_rcgr = 0x68068,
- .freq_tbl = ftbl_nss_port5_tx_clk_src,
-@@ -1848,8 +1784,8 @@ static struct clk_rcg2 nss_port5_tx_clk_
- .parent_map = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port5_tx_clk_src",
-- .parent_names = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias,
-- .num_parents = 7,
-+ .parent_data = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1861,9 +1797,8 @@ static struct clk_regmap_div nss_port5_t
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port5_tx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port5_tx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port5_tx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1883,6 +1818,22 @@ static const struct freq_tbl ftbl_nss_po
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_uniphy2_rx_tx_ubi32_bias[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .name = "uniphy2_gcc_rx_clk" },
-+ { .name = "uniphy2_gcc_tx_clk" },
-+ { .hw = &ubi32_pll.clkr.hw },
-+ { .name = "bias_pll_cc_clk" },
-+};
-+
-+static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = {
-+ { P_XO, 0 },
-+ { P_UNIPHY2_RX, 1 },
-+ { P_UNIPHY2_TX, 2 },
-+ { P_UBI32_PLL, 5 },
-+ { P_BIAS_PLL, 6 },
-+};
-+
- static struct clk_rcg2 nss_port6_rx_clk_src = {
- .cmd_rcgr = 0x68070,
- .freq_tbl = ftbl_nss_port6_rx_clk_src,
-@@ -1890,8 +1841,8 @@ static struct clk_rcg2 nss_port6_rx_clk_
- .parent_map = gcc_xo_uniphy2_rx_tx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port6_rx_clk_src",
-- .parent_names = gcc_xo_uniphy2_rx_tx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy2_rx_tx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy2_rx_tx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1903,9 +1854,8 @@ static struct clk_regmap_div nss_port6_r
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port6_rx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port6_rx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port6_rx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1925,6 +1875,22 @@ static const struct freq_tbl ftbl_nss_po
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_uniphy2_tx_rx_ubi32_bias[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .name = "uniphy2_gcc_tx_clk" },
-+ { .name = "uniphy2_gcc_rx_clk" },
-+ { .hw = &ubi32_pll.clkr.hw },
-+ { .name = "bias_pll_cc_clk" },
-+};
-+
-+static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = {
-+ { P_XO, 0 },
-+ { P_UNIPHY2_TX, 1 },
-+ { P_UNIPHY2_RX, 2 },
-+ { P_UBI32_PLL, 5 },
-+ { P_BIAS_PLL, 6 },
-+};
-+
- static struct clk_rcg2 nss_port6_tx_clk_src = {
- .cmd_rcgr = 0x68078,
- .freq_tbl = ftbl_nss_port6_tx_clk_src,
-@@ -1932,8 +1898,8 @@ static struct clk_rcg2 nss_port6_tx_clk_
- .parent_map = gcc_xo_uniphy2_tx_rx_ubi32_bias_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "nss_port6_tx_clk_src",
-- .parent_names = gcc_xo_uniphy2_tx_rx_ubi32_bias,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_uniphy2_tx_rx_ubi32_bias,
-+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy2_tx_rx_ubi32_bias),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1945,9 +1911,8 @@ static struct clk_regmap_div nss_port6_t
- .clkr = {
- .hw.init = &(struct clk_init_data){
- .name = "nss_port6_tx_div_clk_src",
-- .parent_names = (const char *[]){
-- "nss_port6_tx_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port6_tx_clk_src.clkr.hw },
- .num_parents = 1,
- .ops = &clk_regmap_div_ops,
- .flags = CLK_SET_RATE_PARENT,
-@@ -1970,8 +1935,8 @@ static struct clk_rcg2 crypto_clk_src =
- .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "crypto_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
-- .num_parents = 3,
-+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -1981,6 +1946,22 @@ static struct freq_tbl ftbl_gp_clk_src[]
- { }
- };
-
-+static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = {
-+ { .fw_name = "xo", .name = "xo" },
-+ { .hw = &gpll0.clkr.hw },
-+ { .hw = &gpll6.clkr.hw },
-+ { .hw = &gpll0_out_main_div2.hw },
-+ { .fw_name = "sleep_clk", .name = "sleep_clk" },
-+};
-+
-+static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = {
-+ { P_XO, 0 },
-+ { P_GPLL0, 1 },
-+ { P_GPLL6, 2 },
-+ { P_GPLL0_DIV2, 4 },
-+ { P_SLEEP_CLK, 6 },
-+};
-+
- static struct clk_rcg2 gp1_clk_src = {
- .cmd_rcgr = 0x08004,
- .freq_tbl = ftbl_gp_clk_src,
-@@ -1989,8 +1970,8 @@ static struct clk_rcg2 gp1_clk_src = {
- .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gp1_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -2003,8 +1984,8 @@ static struct clk_rcg2 gp2_clk_src = {
- .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gp2_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -2017,8 +1998,8 @@ static struct clk_rcg2 gp3_clk_src = {
- .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gp3_clk_src",
-- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
-- .num_parents = 5,
-+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk),
- .ops = &clk_rcg2_ops,
- },
- };
-@@ -2030,9 +2011,8 @@ static struct clk_branch gcc_blsp1_ahb_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2047,9 +2027,8 @@ static struct clk_branch gcc_blsp1_qup1_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup1_i2c_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup1_i2c_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup1_i2c_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2064,9 +2043,8 @@ static struct clk_branch gcc_blsp1_qup1_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup1_spi_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup1_spi_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup1_spi_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2081,9 +2059,8 @@ static struct clk_branch gcc_blsp1_qup2_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup2_i2c_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup2_i2c_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup2_i2c_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2098,9 +2075,8 @@ static struct clk_branch gcc_blsp1_qup2_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup2_spi_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup2_spi_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup2_spi_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2115,9 +2091,8 @@ static struct clk_branch gcc_blsp1_qup3_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup3_i2c_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup3_i2c_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup3_i2c_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2132,9 +2107,8 @@ static struct clk_branch gcc_blsp1_qup3_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup3_spi_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup3_spi_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup3_spi_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2149,9 +2123,8 @@ static struct clk_branch gcc_blsp1_qup4_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup4_i2c_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup4_i2c_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup4_i2c_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2166,9 +2139,8 @@ static struct clk_branch gcc_blsp1_qup4_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup4_spi_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup4_spi_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup4_spi_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2183,9 +2155,8 @@ static struct clk_branch gcc_blsp1_qup5_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup5_i2c_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup5_i2c_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup5_i2c_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2200,9 +2171,8 @@ static struct clk_branch gcc_blsp1_qup5_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup5_spi_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup5_spi_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup5_spi_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2217,9 +2187,8 @@ static struct clk_branch gcc_blsp1_qup6_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup6_i2c_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup6_i2c_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup6_i2c_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2234,9 +2203,8 @@ static struct clk_branch gcc_blsp1_qup6_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_qup6_spi_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_qup6_spi_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_qup6_spi_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2251,9 +2219,8 @@ static struct clk_branch gcc_blsp1_uart1
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_uart1_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_uart1_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_uart1_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2268,9 +2235,8 @@ static struct clk_branch gcc_blsp1_uart2
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_uart2_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_uart2_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_uart2_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2285,9 +2251,8 @@ static struct clk_branch gcc_blsp1_uart3
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_uart3_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_uart3_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_uart3_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2302,9 +2267,8 @@ static struct clk_branch gcc_blsp1_uart4
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_uart4_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_uart4_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_uart4_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2319,9 +2283,8 @@ static struct clk_branch gcc_blsp1_uart5
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_uart5_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_uart5_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_uart5_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2336,9 +2299,8 @@ static struct clk_branch gcc_blsp1_uart6
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_blsp1_uart6_apps_clk",
-- .parent_names = (const char *[]){
-- "blsp1_uart6_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &blsp1_uart6_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2354,9 +2316,8 @@ static struct clk_branch gcc_prng_ahb_cl
- .enable_mask = BIT(8),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_prng_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2371,9 +2332,8 @@ static struct clk_branch gcc_qpic_ahb_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_qpic_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2388,9 +2348,8 @@ static struct clk_branch gcc_qpic_clk =
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_qpic_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2405,9 +2364,8 @@ static struct clk_branch gcc_pcie0_ahb_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie0_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2422,9 +2380,8 @@ static struct clk_branch gcc_pcie0_aux_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie0_aux_clk",
-- .parent_names = (const char *[]){
-- "pcie0_aux_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie0_aux_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2439,9 +2396,8 @@ static struct clk_branch gcc_pcie0_axi_m
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie0_axi_m_clk",
-- .parent_names = (const char *[]){
-- "pcie0_axi_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie0_axi_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2456,9 +2412,8 @@ static struct clk_branch gcc_pcie0_axi_s
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie0_axi_s_clk",
-- .parent_names = (const char *[]){
-- "pcie0_axi_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie0_axi_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2474,9 +2429,8 @@ static struct clk_branch gcc_pcie0_pipe_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie0_pipe_clk",
-- .parent_names = (const char *[]){
-- "pcie0_pipe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie0_pipe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2491,9 +2445,8 @@ static struct clk_branch gcc_sys_noc_pci
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sys_noc_pcie0_axi_clk",
-- .parent_names = (const char *[]){
-- "pcie0_axi_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie0_axi_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2508,9 +2461,8 @@ static struct clk_branch gcc_pcie1_ahb_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie1_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2525,9 +2477,8 @@ static struct clk_branch gcc_pcie1_aux_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie1_aux_clk",
-- .parent_names = (const char *[]){
-- "pcie1_aux_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie1_aux_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2542,9 +2493,8 @@ static struct clk_branch gcc_pcie1_axi_m
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie1_axi_m_clk",
-- .parent_names = (const char *[]){
-- "pcie1_axi_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie1_axi_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2559,9 +2509,8 @@ static struct clk_branch gcc_pcie1_axi_s
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie1_axi_s_clk",
-- .parent_names = (const char *[]){
-- "pcie1_axi_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie1_axi_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2577,9 +2526,8 @@ static struct clk_branch gcc_pcie1_pipe_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_pcie1_pipe_clk",
-- .parent_names = (const char *[]){
-- "pcie1_pipe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie1_pipe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2594,9 +2542,8 @@ static struct clk_branch gcc_sys_noc_pci
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sys_noc_pcie1_axi_clk",
-- .parent_names = (const char *[]){
-- "pcie1_axi_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcie1_axi_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2611,9 +2558,8 @@ static struct clk_branch gcc_usb0_aux_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb0_aux_clk",
-- .parent_names = (const char *[]){
-- "usb0_aux_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb0_aux_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2628,9 +2574,8 @@ static struct clk_branch gcc_sys_noc_usb
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sys_noc_usb0_axi_clk",
-- .parent_names = (const char *[]){
-- "usb0_master_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb0_master_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2645,9 +2590,8 @@ static struct clk_branch gcc_usb0_master
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb0_master_clk",
-- .parent_names = (const char *[]){
-- "usb0_master_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb0_master_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2662,9 +2606,8 @@ static struct clk_branch gcc_usb0_mock_u
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb0_mock_utmi_clk",
-- .parent_names = (const char *[]){
-- "usb0_mock_utmi_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb0_mock_utmi_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2679,9 +2622,8 @@ static struct clk_branch gcc_usb0_phy_cf
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb0_phy_cfg_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2697,9 +2639,8 @@ static struct clk_branch gcc_usb0_pipe_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb0_pipe_clk",
-- .parent_names = (const char *[]){
-- "usb0_pipe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb0_pipe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2714,9 +2655,8 @@ static struct clk_branch gcc_usb0_sleep_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb0_sleep_clk",
-- .parent_names = (const char *[]){
-- "gcc_sleep_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gcc_sleep_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2731,9 +2671,8 @@ static struct clk_branch gcc_usb1_aux_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb1_aux_clk",
-- .parent_names = (const char *[]){
-- "usb1_aux_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb1_aux_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2748,9 +2687,8 @@ static struct clk_branch gcc_sys_noc_usb
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sys_noc_usb1_axi_clk",
-- .parent_names = (const char *[]){
-- "usb1_master_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb1_master_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2765,9 +2703,8 @@ static struct clk_branch gcc_usb1_master
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb1_master_clk",
-- .parent_names = (const char *[]){
-- "usb1_master_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb1_master_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2782,9 +2719,8 @@ static struct clk_branch gcc_usb1_mock_u
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb1_mock_utmi_clk",
-- .parent_names = (const char *[]){
-- "usb1_mock_utmi_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb1_mock_utmi_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2799,9 +2735,8 @@ static struct clk_branch gcc_usb1_phy_cf
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb1_phy_cfg_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2817,9 +2752,8 @@ static struct clk_branch gcc_usb1_pipe_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb1_pipe_clk",
-- .parent_names = (const char *[]){
-- "usb1_pipe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &usb1_pipe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2834,9 +2768,8 @@ static struct clk_branch gcc_usb1_sleep_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_usb1_sleep_clk",
-- .parent_names = (const char *[]){
-- "gcc_sleep_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gcc_sleep_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2851,9 +2784,8 @@ static struct clk_branch gcc_sdcc1_ahb_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sdcc1_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2868,9 +2800,8 @@ static struct clk_branch gcc_sdcc1_apps_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sdcc1_apps_clk",
-- .parent_names = (const char *[]){
-- "sdcc1_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &sdcc1_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2885,9 +2816,8 @@ static struct clk_branch gcc_sdcc1_ice_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sdcc1_ice_core_clk",
-- .parent_names = (const char *[]){
-- "sdcc1_ice_core_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &sdcc1_ice_core_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2902,9 +2832,8 @@ static struct clk_branch gcc_sdcc2_ahb_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sdcc2_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2919,9 +2848,8 @@ static struct clk_branch gcc_sdcc2_apps_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sdcc2_apps_clk",
-- .parent_names = (const char *[]){
-- "sdcc2_apps_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &sdcc2_apps_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2936,9 +2864,8 @@ static struct clk_branch gcc_mem_noc_nss
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_mem_noc_nss_axi_clk",
-- .parent_names = (const char *[]){
-- "nss_noc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_noc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2953,9 +2880,8 @@ static struct clk_branch gcc_nss_ce_apb_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_ce_apb_clk",
-- .parent_names = (const char *[]){
-- "nss_ce_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ce_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2970,9 +2896,8 @@ static struct clk_branch gcc_nss_ce_axi_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_ce_axi_clk",
-- .parent_names = (const char *[]){
-- "nss_ce_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ce_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -2987,9 +2912,8 @@ static struct clk_branch gcc_nss_cfg_clk
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_cfg_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3004,9 +2928,8 @@ static struct clk_branch gcc_nss_crypto_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_crypto_clk",
-- .parent_names = (const char *[]){
-- "nss_crypto_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_crypto_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3021,9 +2944,8 @@ static struct clk_branch gcc_nss_csr_clk
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_csr_clk",
-- .parent_names = (const char *[]){
-- "nss_ce_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ce_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3038,9 +2960,8 @@ static struct clk_branch gcc_nss_edma_cf
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_edma_cfg_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3055,9 +2976,8 @@ static struct clk_branch gcc_nss_edma_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_edma_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3072,9 +2992,8 @@ static struct clk_branch gcc_nss_imem_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_imem_clk",
-- .parent_names = (const char *[]){
-- "nss_imem_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_imem_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3089,9 +3008,8 @@ static struct clk_branch gcc_nss_noc_clk
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_noc_clk",
-- .parent_names = (const char *[]){
-- "nss_noc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_noc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3106,9 +3024,8 @@ static struct clk_branch gcc_nss_ppe_btq
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_ppe_btq_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3123,9 +3040,8 @@ static struct clk_branch gcc_nss_ppe_cfg
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_ppe_cfg_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3140,9 +3056,8 @@ static struct clk_branch gcc_nss_ppe_clk
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_ppe_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3157,9 +3072,8 @@ static struct clk_branch gcc_nss_ppe_ipe
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_ppe_ipe_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3174,9 +3088,8 @@ static struct clk_branch gcc_nss_ptp_ref
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_ptp_ref_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_cdiv_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_cdiv_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3192,9 +3105,8 @@ static struct clk_branch gcc_crypto_ppe_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_crypto_ppe_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3209,9 +3121,8 @@ static struct clk_branch gcc_nssnoc_ce_a
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_ce_apb_clk",
-- .parent_names = (const char *[]){
-- "nss_ce_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ce_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3226,9 +3137,8 @@ static struct clk_branch gcc_nssnoc_ce_a
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_ce_axi_clk",
-- .parent_names = (const char *[]){
-- "nss_ce_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ce_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3243,9 +3153,8 @@ static struct clk_branch gcc_nssnoc_cryp
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_crypto_clk",
-- .parent_names = (const char *[]){
-- "nss_crypto_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_crypto_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3260,9 +3169,8 @@ static struct clk_branch gcc_nssnoc_ppe_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_ppe_cfg_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3277,9 +3185,8 @@ static struct clk_branch gcc_nssnoc_ppe_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_ppe_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3294,9 +3201,8 @@ static struct clk_branch gcc_nssnoc_qosg
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_qosgen_ref_clk",
-- .parent_names = (const char *[]){
-- "gcc_xo_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gcc_xo_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3311,9 +3217,8 @@ static struct clk_branch gcc_nssnoc_snoc
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_snoc_clk",
-- .parent_names = (const char *[]){
-- "system_noc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &system_noc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3328,9 +3233,8 @@ static struct clk_branch gcc_nssnoc_time
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_timeout_ref_clk",
-- .parent_names = (const char *[]){
-- "gcc_xo_div4_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gcc_xo_div4_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3345,9 +3249,8 @@ static struct clk_branch gcc_nssnoc_ubi0
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_ubi0_ahb_clk",
-- .parent_names = (const char *[]){
-- "nss_ce_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ce_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3362,9 +3265,8 @@ static struct clk_branch gcc_nssnoc_ubi1
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nssnoc_ubi1_ahb_clk",
-- .parent_names = (const char *[]){
-- "nss_ce_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ce_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3380,9 +3282,8 @@ static struct clk_branch gcc_ubi0_ahb_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi0_ahb_clk",
-- .parent_names = (const char *[]){
-- "nss_ce_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ce_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3398,9 +3299,8 @@ static struct clk_branch gcc_ubi0_axi_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi0_axi_clk",
-- .parent_names = (const char *[]){
-- "nss_noc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_noc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3416,9 +3316,8 @@ static struct clk_branch gcc_ubi0_nc_axi
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi0_nc_axi_clk",
-- .parent_names = (const char *[]){
-- "nss_noc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_noc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3434,9 +3333,8 @@ static struct clk_branch gcc_ubi0_core_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi0_core_clk",
-- .parent_names = (const char *[]){
-- "nss_ubi0_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ubi0_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3452,9 +3350,8 @@ static struct clk_branch gcc_ubi0_mpt_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi0_mpt_clk",
-- .parent_names = (const char *[]){
-- "ubi_mpt_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &ubi_mpt_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3470,9 +3367,8 @@ static struct clk_branch gcc_ubi1_ahb_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi1_ahb_clk",
-- .parent_names = (const char *[]){
-- "nss_ce_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ce_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3488,9 +3384,8 @@ static struct clk_branch gcc_ubi1_axi_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi1_axi_clk",
-- .parent_names = (const char *[]){
-- "nss_noc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_noc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3506,9 +3401,8 @@ static struct clk_branch gcc_ubi1_nc_axi
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi1_nc_axi_clk",
-- .parent_names = (const char *[]){
-- "nss_noc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_noc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3524,9 +3418,8 @@ static struct clk_branch gcc_ubi1_core_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi1_core_clk",
-- .parent_names = (const char *[]){
-- "nss_ubi1_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ubi1_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3542,9 +3435,8 @@ static struct clk_branch gcc_ubi1_mpt_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_ubi1_mpt_clk",
-- .parent_names = (const char *[]){
-- "ubi_mpt_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &ubi_mpt_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3559,9 +3451,8 @@ static struct clk_branch gcc_cmn_12gpll_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_cmn_12gpll_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3576,9 +3467,8 @@ static struct clk_branch gcc_cmn_12gpll_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_cmn_12gpll_sys_clk",
-- .parent_names = (const char *[]){
-- "gcc_xo_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gcc_xo_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3593,9 +3483,8 @@ static struct clk_branch gcc_mdio_ahb_cl
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_mdio_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3610,9 +3499,8 @@ static struct clk_branch gcc_uniphy0_ahb
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3627,9 +3515,8 @@ static struct clk_branch gcc_uniphy0_sys
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_sys_clk",
-- .parent_names = (const char *[]){
-- "gcc_xo_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gcc_xo_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3644,9 +3531,8 @@ static struct clk_branch gcc_uniphy1_ahb
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy1_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3661,9 +3547,8 @@ static struct clk_branch gcc_uniphy1_sys
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy1_sys_clk",
-- .parent_names = (const char *[]){
-- "gcc_xo_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gcc_xo_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3678,9 +3563,8 @@ static struct clk_branch gcc_uniphy2_ahb
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy2_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3695,9 +3579,8 @@ static struct clk_branch gcc_uniphy2_sys
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy2_sys_clk",
-- .parent_names = (const char *[]){
-- "gcc_xo_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gcc_xo_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3712,9 +3595,8 @@ static struct clk_branch gcc_nss_port1_r
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port1_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port1_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port1_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3729,9 +3611,8 @@ static struct clk_branch gcc_nss_port1_t
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port1_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port1_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port1_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3746,9 +3627,8 @@ static struct clk_branch gcc_nss_port2_r
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port2_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port2_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port2_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3763,9 +3643,8 @@ static struct clk_branch gcc_nss_port2_t
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port2_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port2_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port2_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3780,9 +3659,8 @@ static struct clk_branch gcc_nss_port3_r
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port3_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port3_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port3_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3797,9 +3675,8 @@ static struct clk_branch gcc_nss_port3_t
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port3_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port3_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port3_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3814,9 +3691,8 @@ static struct clk_branch gcc_nss_port4_r
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port4_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port4_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port4_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3831,9 +3707,8 @@ static struct clk_branch gcc_nss_port4_t
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port4_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port4_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port4_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3848,9 +3723,8 @@ static struct clk_branch gcc_nss_port5_r
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port5_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port5_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port5_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3865,9 +3739,8 @@ static struct clk_branch gcc_nss_port5_t
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port5_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port5_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port5_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3882,9 +3755,8 @@ static struct clk_branch gcc_nss_port6_r
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port6_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port6_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port6_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3899,9 +3771,8 @@ static struct clk_branch gcc_nss_port6_t
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_nss_port6_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port6_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port6_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3916,9 +3787,8 @@ static struct clk_branch gcc_port1_mac_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_port1_mac_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3933,9 +3803,8 @@ static struct clk_branch gcc_port2_mac_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_port2_mac_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3950,9 +3819,8 @@ static struct clk_branch gcc_port3_mac_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_port3_mac_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3967,9 +3835,8 @@ static struct clk_branch gcc_port4_mac_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_port4_mac_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -3984,9 +3851,8 @@ static struct clk_branch gcc_port5_mac_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_port5_mac_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4001,9 +3867,8 @@ static struct clk_branch gcc_port6_mac_c
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_port6_mac_clk",
-- .parent_names = (const char *[]){
-- "nss_ppe_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_ppe_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4018,9 +3883,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port1_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port1_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port1_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4035,9 +3899,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port1_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port1_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port1_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4052,9 +3915,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port2_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port2_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port2_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4069,9 +3931,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port2_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port2_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port2_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4086,9 +3947,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port3_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port3_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port3_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4103,9 +3963,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port3_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port3_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port3_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4120,9 +3979,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port4_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port4_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port4_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4137,9 +3995,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port4_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port4_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port4_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4154,9 +4011,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port5_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port5_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port5_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4171,9 +4027,8 @@ static struct clk_branch gcc_uniphy0_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy0_port5_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port5_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port5_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4188,9 +4043,8 @@ static struct clk_branch gcc_uniphy1_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy1_port5_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port5_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port5_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4205,9 +4059,8 @@ static struct clk_branch gcc_uniphy1_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy1_port5_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port5_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port5_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4222,9 +4075,8 @@ static struct clk_branch gcc_uniphy2_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy2_port6_rx_clk",
-- .parent_names = (const char *[]){
-- "nss_port6_rx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port6_rx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4239,9 +4091,8 @@ static struct clk_branch gcc_uniphy2_por
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_uniphy2_port6_tx_clk",
-- .parent_names = (const char *[]){
-- "nss_port6_tx_div_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &nss_port6_tx_div_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4257,9 +4108,8 @@ static struct clk_branch gcc_crypto_ahb_
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_crypto_ahb_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4275,9 +4125,8 @@ static struct clk_branch gcc_crypto_axi_
- .enable_mask = BIT(1),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_crypto_axi_clk",
-- .parent_names = (const char *[]){
-- "pcnoc_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &pcnoc_clk_src.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4293,9 +4142,8 @@ static struct clk_branch gcc_crypto_clk
- .enable_mask = BIT(2),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_crypto_clk",
-- .parent_names = (const char *[]){
-- "crypto_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &crypto_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4310,9 +4158,8 @@ static struct clk_branch gcc_gp1_clk = {
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_gp1_clk",
-- .parent_names = (const char *[]){
-- "gp1_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gp1_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4327,9 +4174,8 @@ static struct clk_branch gcc_gp2_clk = {
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_gp2_clk",
-- .parent_names = (const char *[]){
-- "gp2_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gp2_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4344,9 +4190,8 @@ static struct clk_branch gcc_gp3_clk = {
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_gp3_clk",
-- .parent_names = (const char *[]){
-- "gp3_clk_src"
-- },
-+ .parent_hws = (const struct clk_hw *[]){
-+ &gp3_clk_src.clkr.hw },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
-@@ -4368,7 +4213,7 @@ static struct clk_rcg2 pcie0_rchng_clk_s
- .clkr.hw.init = &(struct clk_init_data){
- .name = "pcie0_rchng_clk_src",
- .parent_data = gcc_xo_gpll0,
-- .num_parents = 2,
-+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
- .ops = &clk_rcg2_ops,
- },
- };
diff --git a/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch b/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch
deleted file mode 100644
index 6a525f2c3e..0000000000
--- a/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 72bc31aa621e21a7c36a7da8aa6f6a77bb234e0b Mon Sep 17 00:00:00 2001
-From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
-Date: Wed, 6 Jul 2022 15:41:29 +0200
-Subject: [PATCH] clk: qcom: reset: Allow specifying custom reset delay
-
-The amount of time required between asserting and deasserting the reset
-signal can vary depending on the involved hardware component. Sometimes
-1 us might not be enough and a larger delay is necessary to conform to
-the specifications.
-
-Usually this is worked around in the consuming drivers, by replacing
-reset_control_reset() with a sequence of reset_control_assert(), waiting
-for a custom delay, followed by reset_control_deassert().
-
-However, in some cases the driver making use of the reset is generic and
-can be used with different reset controllers. In this case the reset
-time requirement is better handled directly by the reset controller
-driver.
-
-Make this possible by adding an "udelay" field to the qcom_reset_map
-that allows setting a different reset delay (in microseconds).
-
-Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com
----
- drivers/clk/qcom/reset.c | 4 +++-
- drivers/clk/qcom/reset.h | 1 +
- 2 files changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/qcom/reset.c
-+++ b/drivers/clk/qcom/reset.c
-@@ -13,8 +13,10 @@
-
- static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id)
- {
-+ struct qcom_reset_controller *rst = to_qcom_reset_controller(rcdev);
-+
- rcdev->ops->assert(rcdev, id);
-- udelay(1);
-+ udelay(rst->reset_map[id].udelay ?: 1); /* use 1 us as default */
- rcdev->ops->deassert(rcdev, id);
- return 0;
- }
---- a/drivers/clk/qcom/reset.h
-+++ b/drivers/clk/qcom/reset.h
-@@ -11,6 +11,7 @@
- struct qcom_reset_map {
- unsigned int reg;
- u8 bit;
-+ u8 udelay;
- };
-
- struct regmap;
diff --git a/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch b/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch
deleted file mode 100644
index e0725a6612..0000000000
--- a/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 813ba3e427671ba3ff35c825087b03f0ad91cf02 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 7 Nov 2022 14:28:59 +0100
-Subject: [PATCH] clk: qcom: reset: support resetting multiple bits
-
-This patch adds the support for giving the complete bitmask
-in reset structure and reset operation will use this bitmask
-for all reset operations.
-
-Currently, reset structure only takes a single bit for each reset
-and then calculates the bitmask by using the BIT() macro.
-
-However, this is not sufficient anymore for newer SoC-s like IPQ8074,
-IPQ6018 and more, since their networking resets require multiple bits
-to be asserted in order to properly reset the HW block completely.
-
-So, in order to allow asserting multiple bits add "bitmask" field to
-qcom_reset_map, and then use that bitmask value if its populated in the
-driver, if its not populated, then we just default to existing behaviour
-and calculate the bitmask on the fly.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
----
- drivers/clk/qcom/reset.c | 4 ++--
- drivers/clk/qcom/reset.h | 1 +
- 2 files changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/qcom/reset.c
-+++ b/drivers/clk/qcom/reset.c
-@@ -30,7 +30,7 @@ qcom_reset_assert(struct reset_controlle
-
- rst = to_qcom_reset_controller(rcdev);
- map = &rst->reset_map[id];
-- mask = BIT(map->bit);
-+ mask = map->bitmask ? map->bitmask : BIT(map->bit);
-
- return regmap_update_bits(rst->regmap, map->reg, mask, mask);
- }
-@@ -44,7 +44,7 @@ qcom_reset_deassert(struct reset_control
-
- rst = to_qcom_reset_controller(rcdev);
- map = &rst->reset_map[id];
-- mask = BIT(map->bit);
-+ mask = map->bitmask ? map->bitmask : BIT(map->bit);
-
- return regmap_update_bits(rst->regmap, map->reg, mask, 0);
- }
---- a/drivers/clk/qcom/reset.h
-+++ b/drivers/clk/qcom/reset.h
-@@ -12,6 +12,7 @@ struct qcom_reset_map {
- unsigned int reg;
- u8 bit;
- u8 udelay;
-+ u32 bitmask;
- };
-
- struct regmap;
diff --git a/target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch b/target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch
deleted file mode 100644
index 75f16a1673..0000000000
--- a/target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From e78a40eb24187a8b4f9b89e2181f674df39c2013 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 7 Nov 2022 14:29:00 +0100
-Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add missing networking
- resets
-
-Add bindings for the missing networking resets found in IPQ8074 GCC.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221107132901.489240-2-robimarko@gmail.com
----
- include/dt-bindings/clock/qcom,gcc-ipq8074.h | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h
-+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
-@@ -367,6 +367,20 @@
- #define GCC_PCIE1_AHB_ARES 129
- #define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130
- #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131
-+#define GCC_PPE_FULL_RESET 132
-+#define GCC_UNIPHY0_SOFT_RESET 133
-+#define GCC_UNIPHY0_XPCS_RESET 134
-+#define GCC_UNIPHY1_SOFT_RESET 135
-+#define GCC_UNIPHY1_XPCS_RESET 136
-+#define GCC_UNIPHY2_SOFT_RESET 137
-+#define GCC_UNIPHY2_XPCS_RESET 138
-+#define GCC_EDMA_HW_RESET 139
-+#define GCC_NSSPORT1_RESET 140
-+#define GCC_NSSPORT2_RESET 141
-+#define GCC_NSSPORT3_RESET 142
-+#define GCC_NSSPORT4_RESET 143
-+#define GCC_NSSPORT5_RESET 144
-+#define GCC_NSSPORT6_RESET 145
-
- #define USB0_GDSC 0
- #define USB1_GDSC 1
diff --git a/target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch b/target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch
deleted file mode 100644
index 212fc84869..0000000000
--- a/target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From da76cb63d04dc22ed32123b8c1d084c006d67bfb Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 7 Nov 2022 14:29:01 +0100
-Subject: [PATCH] clk: qcom: ipq8074: add missing networking resets
-
-Downstream QCA 5.4 kernel defines networking resets which are not present
-in the mainline kernel but are required for the networking drivers.
-
-So, port the downstream resets and avoid using magic values for mask,
-construct mask for resets which require multiple bits to be set/cleared.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221107132901.489240-3-robimarko@gmail.com
----
- drivers/clk/qcom/gcc-ipq8074.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/clk/qcom/gcc-ipq8074.c
-+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -4671,6 +4671,20 @@ static const struct qcom_reset_map gcc_i
- [GCC_PCIE1_AXI_SLAVE_ARES] = { 0x76040, 4 },
- [GCC_PCIE1_AHB_ARES] = { 0x76040, 5 },
- [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 },
-+ [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = GENMASK(19, 16) },
-+ [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = GENMASK(13, 4) | BIT(1) },
-+ [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 },
-+ [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = GENMASK(5, 4) | BIT(1) },
-+ [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 },
-+ [GCC_UNIPHY2_SOFT_RESET] = { .reg = 0x56204, .bitmask = GENMASK(5, 4) | BIT(1) },
-+ [GCC_UNIPHY2_XPCS_RESET] = { 0x56204, 2 },
-+ [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = GENMASK(21, 20) },
-+ [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = BIT(24) | GENMASK(1, 0) },
-+ [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = BIT(25) | GENMASK(3, 2) },
-+ [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = BIT(26) | GENMASK(5, 4) },
-+ [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) },
-+ [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) },
-+ [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) },
- };
-
- static struct gdsc *gcc_ipq8074_gdscs[] = {
diff --git a/target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch b/target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch
deleted file mode 100644
index 7372b1da8e..0000000000
--- a/target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From 78936d46470938caa9a7ea529deeb36777b4f98e Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 16 Nov 2022 22:46:55 +0100
-Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for all parents
-
-It appears that having only .name populated in parent_data for clocks
-which are only globally searchable currently will not work as the clk core
-won't copy that name if there is no .fw_name present as well.
-
-So, populate .fw_name for all parent clocks in parent_data.
-
-Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data")
-
-Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221116214655.1116467-1-robimarko@gmail.com
----
- drivers/clk/qcom/gcc-ipq8074.c | 52 +++++++++++++++++-----------------
- 1 file changed, 26 insertions(+), 26 deletions(-)
-
---- a/drivers/clk/qcom/gcc-ipq8074.c
-+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -680,7 +680,7 @@ static struct clk_rcg2 pcie0_aux_clk_src
- };
-
- static const struct clk_parent_data gcc_pcie20_phy0_pipe_clk_xo[] = {
-- { .name = "pcie20_phy0_pipe_clk" },
-+ { .fw_name = "pcie0_pipe", .name = "pcie20_phy0_pipe_clk" },
- { .fw_name = "xo", .name = "xo" },
- };
-
-@@ -733,7 +733,7 @@ static struct clk_rcg2 pcie1_aux_clk_src
- };
-
- static const struct clk_parent_data gcc_pcie20_phy1_pipe_clk_xo[] = {
-- { .name = "pcie20_phy1_pipe_clk" },
-+ { .fw_name = "pcie1_pipe", .name = "pcie20_phy1_pipe_clk" },
- { .fw_name = "xo", .name = "xo" },
- };
-
-@@ -1137,7 +1137,7 @@ static const struct freq_tbl ftbl_nss_no
-
- static const struct clk_parent_data gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = {
- { .fw_name = "xo", .name = "xo" },
-- { .name = "bias_pll_nss_noc_clk" },
-+ { .fw_name = "bias_pll_nss_noc_clk", .name = "bias_pll_nss_noc_clk" },
- { .hw = &gpll0.clkr.hw },
- { .hw = &gpll2.clkr.hw },
- };
-@@ -1362,7 +1362,7 @@ static const struct freq_tbl ftbl_nss_pp
-
- static const struct clk_parent_data gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = {
- { .fw_name = "xo", .name = "xo" },
-- { .name = "bias_pll_cc_clk" },
-+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" },
- { .hw = &gpll0.clkr.hw },
- { .hw = &gpll4.clkr.hw },
- { .hw = &nss_crypto_pll.clkr.hw },
-@@ -1413,10 +1413,10 @@ static const struct freq_tbl ftbl_nss_po
-
- static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_ubi32_bias[] = {
- { .fw_name = "xo", .name = "xo" },
-- { .name = "uniphy0_gcc_rx_clk" },
-- { .name = "uniphy0_gcc_tx_clk" },
-+ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" },
-+ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" },
- { .hw = &ubi32_pll.clkr.hw },
-- { .name = "bias_pll_cc_clk" },
-+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" },
- };
-
- static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = {
-@@ -1465,10 +1465,10 @@ static const struct freq_tbl ftbl_nss_po
-
- static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_ubi32_bias[] = {
- { .fw_name = "xo", .name = "xo" },
-- { .name = "uniphy0_gcc_tx_clk" },
-- { .name = "uniphy0_gcc_rx_clk" },
-+ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" },
-+ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" },
- { .hw = &ubi32_pll.clkr.hw },
-- { .name = "bias_pll_cc_clk" },
-+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" },
- };
-
- static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = {
-@@ -1696,12 +1696,12 @@ static const struct freq_tbl ftbl_nss_po
-
- static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = {
- { .fw_name = "xo", .name = "xo" },
-- { .name = "uniphy0_gcc_rx_clk" },
-- { .name = "uniphy0_gcc_tx_clk" },
-- { .name = "uniphy1_gcc_rx_clk" },
-- { .name = "uniphy1_gcc_tx_clk" },
-+ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" },
-+ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" },
-+ { .fw_name = "uniphy1_gcc_rx_clk", .name = "uniphy1_gcc_rx_clk" },
-+ { .fw_name = "uniphy1_gcc_tx_clk", .name = "uniphy1_gcc_tx_clk" },
- { .hw = &ubi32_pll.clkr.hw },
-- { .name = "bias_pll_cc_clk" },
-+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" },
- };
-
- static const struct parent_map
-@@ -1758,12 +1758,12 @@ static const struct freq_tbl ftbl_nss_po
-
- static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = {
- { .fw_name = "xo", .name = "xo" },
-- { .name = "uniphy0_gcc_tx_clk" },
-- { .name = "uniphy0_gcc_rx_clk" },
-- { .name = "uniphy1_gcc_tx_clk" },
-- { .name = "uniphy1_gcc_rx_clk" },
-+ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" },
-+ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" },
-+ { .fw_name = "uniphy1_gcc_tx_clk", .name = "uniphy1_gcc_tx_clk" },
-+ { .fw_name = "uniphy1_gcc_rx_clk", .name = "uniphy1_gcc_rx_clk" },
- { .hw = &ubi32_pll.clkr.hw },
-- { .name = "bias_pll_cc_clk" },
-+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" },
- };
-
- static const struct parent_map
-@@ -1820,10 +1820,10 @@ static const struct freq_tbl ftbl_nss_po
-
- static const struct clk_parent_data gcc_xo_uniphy2_rx_tx_ubi32_bias[] = {
- { .fw_name = "xo", .name = "xo" },
-- { .name = "uniphy2_gcc_rx_clk" },
-- { .name = "uniphy2_gcc_tx_clk" },
-+ { .fw_name = "uniphy2_gcc_rx_clk", .name = "uniphy2_gcc_rx_clk" },
-+ { .fw_name = "uniphy2_gcc_tx_clk", .name = "uniphy2_gcc_tx_clk" },
- { .hw = &ubi32_pll.clkr.hw },
-- { .name = "bias_pll_cc_clk" },
-+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" },
- };
-
- static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = {
-@@ -1877,10 +1877,10 @@ static const struct freq_tbl ftbl_nss_po
-
- static const struct clk_parent_data gcc_xo_uniphy2_tx_rx_ubi32_bias[] = {
- { .fw_name = "xo", .name = "xo" },
-- { .name = "uniphy2_gcc_tx_clk" },
-- { .name = "uniphy2_gcc_rx_clk" },
-+ { .fw_name = "uniphy2_gcc_tx_clk", .name = "uniphy2_gcc_tx_clk" },
-+ { .fw_name = "uniphy2_gcc_rx_clk", .name = "uniphy2_gcc_rx_clk" },
- { .hw = &ubi32_pll.clkr.hw },
-- { .name = "bias_pll_cc_clk" },
-+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" },
- };
-
- static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = {
diff --git a/target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch b/target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch
deleted file mode 100644
index 1f99de002b..0000000000
--- a/target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 9033c3c86ea0dd35bd2ab957317573b755967298 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 30 Oct 2022 18:57:03 +0100
-Subject: [PATCH] arm64: dts: qcom: ipq8074: pass XO and sleep clocks to GCC
-
-Pass XO and sleep clocks to the GCC controller so it does not have to
-find them by matching globaly by name.
-
-If not passed directly, driver maintains backwards compatibility by then
-falling back to global lookup.
-
-Since we are here, set cell numbers in decimal instead of hex.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221030175703.1103224-3-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -361,9 +361,11 @@
- gcc: gcc@1800000 {
- compatible = "qcom,gcc-ipq8074";
- reg = <0x01800000 0x80000>;
-- #clock-cells = <0x1>;
-+ clocks = <&xo>, <&sleep_clk>;
-+ clock-names = "xo", "sleep_clk";
-+ #clock-cells = <1>;
- #power-domain-cells = <1>;
-- #reset-cells = <0x1>;
-+ #reset-cells = <1>;
- };
-
- tcsr_mutex: hwlock@1905000 {
diff --git a/target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch b/target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch
deleted file mode 100644
index 35f4676a15..0000000000
--- a/target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 0afa47c1b57ba645225b38654869a6e5d2939da5 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Date: Fri, 6 May 2022 18:21:07 +0300
-Subject: [PATCH] arm64: dts: qcom: replace deprecated perst-gpio with
- perst-gpios
-
-Replace deprecated perst-gpio and wake-gpio properties with up-to-date
-perst-gpios and wake-gpios in the Qualcomm device trees.
-
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220506152107.1527552-9-dmitry.baryshkov@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 ++--
- arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 4 ++--
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-@@ -49,12 +49,12 @@
-
- &pcie0 {
- status = "okay";
-- perst-gpio = <&tlmm 61 0x1>;
-+ perst-gpios = <&tlmm 61 0x1>;
- };
-
- &pcie1 {
- status = "okay";
-- perst-gpio = <&tlmm 58 0x1>;
-+ perst-gpios = <&tlmm 58 0x1>;
- };
-
- &pcie_qmp0 {
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
-@@ -39,12 +39,12 @@
-
- &pcie0 {
- status = "ok";
-- perst-gpio = <&tlmm 58 0x1>;
-+ perst-gpios = <&tlmm 58 0x1>;
- };
-
- &pcie1 {
- status = "ok";
-- perst-gpio = <&tlmm 61 0x1>;
-+ perst-gpios = <&tlmm 61 0x1>;
- };
-
- &pcie_phy0 {
diff --git a/target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch b/target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch
deleted file mode 100644
index 61aeb0b029..0000000000
--- a/target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 0eda4c5c7704363f665f4ccf0327349faad245a4 Mon Sep 17 00:00:00 2001
-From: Caleb Connolly <caleb.connolly@linaro.org>
-Date: Fri, 29 Apr 2022 23:08:56 +0100
-Subject: [PATCH] spmi: add a helper to look up an SPMI device from a device
- node
-
-The helper function spmi_device_from_of() takes a device node and
-returns the SPMI device associated with it.
-This is like of_find_device_by_node but for SPMI devices.
-
-Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
-Acked-by: Stephen Boyd <sboyd@kernel.org>
-Link: https://lore.kernel.org/r/20220429220904.137297-2-caleb.connolly@linaro.org
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- drivers/spmi/spmi.c | 17 +++++++++++++++++
- include/linux/spmi.h | 3 +++
- 2 files changed, 20 insertions(+)
-
---- a/drivers/spmi/spmi.c
-+++ b/drivers/spmi/spmi.c
-@@ -388,6 +388,23 @@ static struct bus_type spmi_bus_type = {
- };
-
- /**
-+ * spmi_device_from_of() - get the associated SPMI device from a device node
-+ *
-+ * @np: device node
-+ *
-+ * Returns the struct spmi_device associated with a device node or NULL.
-+ */
-+struct spmi_device *spmi_device_from_of(struct device_node *np)
-+{
-+ struct device *dev = bus_find_device_by_of_node(&spmi_bus_type, np);
-+
-+ if (dev)
-+ return to_spmi_device(dev);
-+ return NULL;
-+}
-+EXPORT_SYMBOL_GPL(spmi_device_from_of);
-+
-+/**
- * spmi_controller_alloc() - Allocate a new SPMI device
- * @ctrl: associated controller
- *
---- a/include/linux/spmi.h
-+++ b/include/linux/spmi.h
-@@ -164,6 +164,9 @@ static inline void spmi_driver_unregiste
- module_driver(__spmi_driver, spmi_driver_register, \
- spmi_driver_unregister)
-
-+struct device_node;
-+
-+struct spmi_device *spmi_device_from_of(struct device_node *np);
- int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf);
- int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf,
- size_t len);
diff --git a/target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch b/target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch
deleted file mode 100644
index 02a37aa376..0000000000
--- a/target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 60df90d6829d16338e2971420220395cfc289247 Mon Sep 17 00:00:00 2001
-From: Bjorn Andersson <bjorn.andersson@linaro.org>
-Date: Sun, 17 Oct 2021 09:12:16 -0700
-Subject: [PATCH] mfd: qcom-spmi-pmic: Sort compatibles in the driver
-
-Sort the compatibles in the driver, to make it easier to validate that
-the DT binding and driver are in sync.
-
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Link: https://lore.kernel.org/r/20211017161218.2378176-2-bjorn.andersson@linaro.org
----
- drivers/mfd/qcom-spmi-pmic.c | 30 +++++++++++++++---------------
- 1 file changed, 15 insertions(+), 15 deletions(-)
-
---- a/drivers/mfd/qcom-spmi-pmic.c
-+++ b/drivers/mfd/qcom-spmi-pmic.c
-@@ -40,27 +40,27 @@
- #define PM660_SUBTYPE 0x1B
-
- static const struct of_device_id pmic_spmi_id_table[] = {
-- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE },
-- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE },
-- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE },
-+ { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE },
-+ { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE },
-+ { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE },
-+ { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE },
- { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE },
-- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE },
- { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE },
-- { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE },
-- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE },
-- { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE },
-- { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE },
-- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE },
-- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE },
-- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE },
-+ { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE },
-+ { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE },
- { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE },
-+ { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE },
-+ { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE },
- { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE },
-- { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE },
-+ { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE },
- { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE },
-+ { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE },
-+ { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE },
-+ { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE },
-+ { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE },
-+ { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE },
- { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE },
-- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE },
-- { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE },
-- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE },
-+ { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE },
- { }
- };
-
diff --git a/target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch b/target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch
deleted file mode 100644
index c2b3e8304d..0000000000
--- a/target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 18921bfd81c88fb85a19683467f680897672f062 Mon Sep 17 00:00:00 2001
-From: Bjorn Andersson <bjorn.andersson@linaro.org>
-Date: Sun, 17 Oct 2021 09:12:18 -0700
-Subject: [PATCH] mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo
-
-The Qualcomm socinfo driver has eight more PMICs described, add these to
-the SPMI PMIC driver as well.
-
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Link: https://lore.kernel.org/r/20211017161218.2378176-4-bjorn.andersson@linaro.org
----
- drivers/mfd/qcom-spmi-pmic.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/drivers/mfd/qcom-spmi-pmic.c
-+++ b/drivers/mfd/qcom-spmi-pmic.c
-@@ -31,6 +31,8 @@
- #define PM8916_SUBTYPE 0x0b
- #define PM8004_SUBTYPE 0x0c
- #define PM8909_SUBTYPE 0x0d
-+#define PM8028_SUBTYPE 0x0e
-+#define PM8901_SUBTYPE 0x0f
- #define PM8950_SUBTYPE 0x10
- #define PMI8950_SUBTYPE 0x11
- #define PM8998_SUBTYPE 0x14
-@@ -38,6 +40,13 @@
- #define PM8005_SUBTYPE 0x18
- #define PM660L_SUBTYPE 0x1A
- #define PM660_SUBTYPE 0x1B
-+#define PM8150_SUBTYPE 0x1E
-+#define PM8150L_SUBTYPE 0x1f
-+#define PM8150B_SUBTYPE 0x20
-+#define PMK8002_SUBTYPE 0x21
-+#define PM8009_SUBTYPE 0x24
-+#define PM8150C_SUBTYPE 0x26
-+#define SMB2351_SUBTYPE 0x29
-
- static const struct of_device_id pmic_spmi_id_table[] = {
- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE },
-@@ -45,9 +54,15 @@ static const struct of_device_id pmic_sp
- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE },
- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE },
- { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE },
-+ { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE },
- { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE },
-+ { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE },
-+ { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE },
-+ { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE },
-+ { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE },
- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE },
- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE },
-+ { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE },
- { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE },
- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE },
- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE },
-@@ -60,6 +75,8 @@ static const struct of_device_id pmic_sp
- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE },
- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE },
- { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE },
-+ { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE },
-+ { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE },
- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE },
- { }
- };
diff --git a/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch b/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch
deleted file mode 100644
index 35e0cc6725..0000000000
--- a/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch
+++ /dev/null
@@ -1,417 +0,0 @@
-From 231f6a9f24a5e9b6e7af801ca2377970474cdf59 Mon Sep 17 00:00:00 2001
-From: Caleb Connolly <caleb.connolly@linaro.org>
-Date: Fri, 29 Apr 2022 23:08:57 +0100
-Subject: [PATCH] mfd: qcom-spmi-pmic: expose the PMIC revid information to
- clients
-
-Some PMIC functions such as the RRADC need to be aware of the PMIC
-chip revision information to implement errata or otherwise adjust
-behaviour, export the PMIC information to enable this.
-
-This is specifically required to enable the RRADC to adjust
-coefficients based on which chip fab the PMIC was produced in,
-this can vary per unique device and therefore has to be read at
-runtime.
-
-Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Acked-by: Lee Jones <lee.jones@linaro.org>
-Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- drivers/mfd/qcom-spmi-pmic.c | 265 ++++++++++++++++++++----------
- include/soc/qcom/qcom-spmi-pmic.h | 60 +++++++
- 2 files changed, 235 insertions(+), 90 deletions(-)
- create mode 100644 include/soc/qcom/qcom-spmi-pmic.h
-
---- a/drivers/mfd/qcom-spmi-pmic.c
-+++ b/drivers/mfd/qcom-spmi-pmic.c
-@@ -3,11 +3,16 @@
- * Copyright (c) 2014, The Linux Foundation. All rights reserved.
- */
-
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/gfp.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/spmi.h>
-+#include <linux/types.h>
- #include <linux/regmap.h>
- #include <linux/of_platform.h>
-+#include <soc/qcom/qcom-spmi-pmic.h>
-
- #define PMIC_REV2 0x101
- #define PMIC_REV3 0x102
-@@ -17,106 +22,140 @@
-
- #define PMIC_TYPE_VALUE 0x51
-
--#define COMMON_SUBTYPE 0x00
--#define PM8941_SUBTYPE 0x01
--#define PM8841_SUBTYPE 0x02
--#define PM8019_SUBTYPE 0x03
--#define PM8226_SUBTYPE 0x04
--#define PM8110_SUBTYPE 0x05
--#define PMA8084_SUBTYPE 0x06
--#define PMI8962_SUBTYPE 0x07
--#define PMD9635_SUBTYPE 0x08
--#define PM8994_SUBTYPE 0x09
--#define PMI8994_SUBTYPE 0x0a
--#define PM8916_SUBTYPE 0x0b
--#define PM8004_SUBTYPE 0x0c
--#define PM8909_SUBTYPE 0x0d
--#define PM8028_SUBTYPE 0x0e
--#define PM8901_SUBTYPE 0x0f
--#define PM8950_SUBTYPE 0x10
--#define PMI8950_SUBTYPE 0x11
--#define PM8998_SUBTYPE 0x14
--#define PMI8998_SUBTYPE 0x15
--#define PM8005_SUBTYPE 0x18
--#define PM660L_SUBTYPE 0x1A
--#define PM660_SUBTYPE 0x1B
--#define PM8150_SUBTYPE 0x1E
--#define PM8150L_SUBTYPE 0x1f
--#define PM8150B_SUBTYPE 0x20
--#define PMK8002_SUBTYPE 0x21
--#define PM8009_SUBTYPE 0x24
--#define PM8150C_SUBTYPE 0x26
--#define SMB2351_SUBTYPE 0x29
-+#define PMIC_REV4_V2 0x02
-+
-+struct qcom_spmi_dev {
-+ int num_usids;
-+ struct qcom_spmi_pmic pmic;
-+};
-+
-+#define N_USIDS(n) ((void *)n)
-
- static const struct of_device_id pmic_spmi_id_table[] = {
-- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE },
-- { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE },
-- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE },
-- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE },
-- { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE },
-- { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE },
-- { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE },
-- { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE },
-- { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE },
-- { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE },
-- { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE },
-- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE },
-- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE },
-- { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE },
-- { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE },
-- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE },
-- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE },
-- { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE },
-- { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE },
-- { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE },
-- { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE },
-- { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE },
-- { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE },
-- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE },
-- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE },
-- { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE },
-- { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE },
-- { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE },
-- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE },
-+ { .compatible = "qcom,pm660", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm660l", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8004", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8005", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8019", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8028", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8110", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8150", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8150b", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8150c", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8150l", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8226", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8841", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8901", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8909", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8916", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8941", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8950", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8994", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pm8998", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pma8084", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pmd9635", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pmi8950", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pmi8962", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pmi8994", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pmi8998", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pmk8002", .data = N_USIDS(2) },
-+ { .compatible = "qcom,smb2351", .data = N_USIDS(2) },
-+ { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) },
- { }
- };
-
--static void pmic_spmi_show_revid(struct regmap *map, struct device *dev)
-+/*
-+ * A PMIC can be represented by multiple SPMI devices, but
-+ * only the base PMIC device will contain a reference to
-+ * the revision information.
-+ *
-+ * This function takes a pointer to a pmic device and
-+ * returns a pointer to the base PMIC device.
-+ *
-+ * This only supports PMICs with 1 or 2 USIDs.
-+ */
-+static struct spmi_device *qcom_pmic_get_base_usid(struct device *dev)
- {
-- unsigned int rev2, minor, major, type, subtype;
-- const char *name = "unknown";
-- int ret, i;
-+ struct spmi_device *sdev;
-+ struct qcom_spmi_dev *ctx;
-+ struct device_node *spmi_bus;
-+ struct device_node *other_usid = NULL;
-+ int function_parent_usid, ret;
-+ u32 pmic_addr;
-
-- ret = regmap_read(map, PMIC_TYPE, &type);
-- if (ret < 0)
-- return;
-+ sdev = to_spmi_device(dev);
-+ ctx = dev_get_drvdata(&sdev->dev);
-
-- if (type != PMIC_TYPE_VALUE)
-- return;
-+ /*
-+ * Quick return if the function device is already in the base
-+ * USID. This will always be hit for PMICs with only 1 USID.
-+ */
-+ if (sdev->usid % ctx->num_usids == 0)
-+ return sdev;
-
-- ret = regmap_read(map, PMIC_SUBTYPE, &subtype);
-+ function_parent_usid = sdev->usid;
-+
-+ /*
-+ * Walk through the list of PMICs until we find the sibling USID.
-+ * The goal is to find the first USID which is less than the
-+ * number of USIDs in the PMIC array, e.g. for a PMIC with 2 USIDs
-+ * where the function device is under USID 3, we want to find the
-+ * device for USID 2.
-+ */
-+ spmi_bus = of_get_parent(sdev->dev.of_node);
-+ do {
-+ other_usid = of_get_next_child(spmi_bus, other_usid);
-+
-+ ret = of_property_read_u32_index(other_usid, "reg", 0, &pmic_addr);
-+ if (ret)
-+ return ERR_PTR(ret);
-+
-+ sdev = spmi_device_from_of(other_usid);
-+ if (pmic_addr == function_parent_usid - (ctx->num_usids - 1)) {
-+ if (!sdev)
-+ /*
-+ * If the base USID for this PMIC hasn't probed yet
-+ * but the secondary USID has, then we need to defer
-+ * the function driver so that it will attempt to
-+ * probe again when the base USID is ready.
-+ */
-+ return ERR_PTR(-EPROBE_DEFER);
-+ return sdev;
-+ }
-+ } while (other_usid->sibling);
-+
-+ return ERR_PTR(-ENODATA);
-+}
-+
-+static int pmic_spmi_load_revid(struct regmap *map, struct device *dev,
-+ struct qcom_spmi_pmic *pmic)
-+{
-+ int ret;
-+
-+ ret = regmap_read(map, PMIC_TYPE, &pmic->type);
- if (ret < 0)
-- return;
-+ return ret;
-
-- for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) {
-- if (subtype == (unsigned long)pmic_spmi_id_table[i].data)
-- break;
-- }
-+ if (pmic->type != PMIC_TYPE_VALUE)
-+ return ret;
-
-- if (i != ARRAY_SIZE(pmic_spmi_id_table))
-- name = pmic_spmi_id_table[i].compatible;
-+ ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype);
-+ if (ret < 0)
-+ return ret;
-
-- ret = regmap_read(map, PMIC_REV2, &rev2);
-+ pmic->name = of_match_device(pmic_spmi_id_table, dev)->compatible;
-+
-+ ret = regmap_read(map, PMIC_REV2, &pmic->rev2);
- if (ret < 0)
-- return;
-+ return ret;
-
-- ret = regmap_read(map, PMIC_REV3, &minor);
-+ ret = regmap_read(map, PMIC_REV3, &pmic->minor);
- if (ret < 0)
-- return;
-+ return ret;
-
-- ret = regmap_read(map, PMIC_REV4, &major);
-+ ret = regmap_read(map, PMIC_REV4, &pmic->major);
- if (ret < 0)
-- return;
-+ return ret;
-
- /*
- * In early versions of PM8941 and PM8226, the major revision number
-@@ -124,15 +163,49 @@ static void pmic_spmi_show_revid(struct
- * Increment the major revision number here if the chip is an early
- * version of PM8941 or PM8226.
- */
-- if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) &&
-- major < 0x02)
-- major++;
-+ if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) &&
-+ pmic->major < PMIC_REV4_V2)
-+ pmic->major++;
-+
-+ if (pmic->subtype == PM8110_SUBTYPE)
-+ pmic->minor = pmic->rev2;
-+
-+ dev_dbg(dev, "%x: %s v%d.%d\n",
-+ pmic->subtype, pmic->name, pmic->major, pmic->minor);
-+
-+ return 0;
-+}
-+
-+/**
-+ * qcom_pmic_get() - Get a pointer to the base PMIC device
-+ *
-+ * This function takes a struct device for a driver which is a child of a PMIC.
-+ * And locates the PMIC revision information for it.
-+ *
-+ * @dev: the pmic function device
-+ * @return: the struct qcom_spmi_pmic* pointer associated with the function device
-+ */
-+const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev)
-+{
-+ struct spmi_device *sdev;
-+ struct qcom_spmi_dev *spmi;
-+
-+ /*
-+ * Make sure the device is actually a child of a PMIC
-+ */
-+ if (!of_match_device(pmic_spmi_id_table, dev->parent))
-+ return ERR_PTR(-EINVAL);
-+
-+ sdev = qcom_pmic_get_base_usid(dev->parent);
-
-- if (subtype == PM8110_SUBTYPE)
-- minor = rev2;
-+ if (IS_ERR(sdev))
-+ return ERR_CAST(sdev);
-
-- dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor);
-+ spmi = dev_get_drvdata(&sdev->dev);
-+
-+ return &spmi->pmic;
- }
-+EXPORT_SYMBOL(qcom_pmic_get);
-
- static const struct regmap_config spmi_regmap_config = {
- .reg_bits = 16,
-@@ -144,14 +217,26 @@ static const struct regmap_config spmi_r
- static int pmic_spmi_probe(struct spmi_device *sdev)
- {
- struct regmap *regmap;
-+ struct qcom_spmi_dev *ctx;
-+ int ret;
-
- regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
-
-+ ctx = devm_kzalloc(&sdev->dev, sizeof(*ctx), GFP_KERNEL);
-+ if (!ctx)
-+ return -ENOMEM;
-+
-+ ctx->num_usids = (uintptr_t)of_device_get_match_data(&sdev->dev);
-+
- /* Only the first slave id for a PMIC contains this information */
-- if (sdev->usid % 2 == 0)
-- pmic_spmi_show_revid(regmap, &sdev->dev);
-+ if (sdev->usid % ctx->num_usids == 0) {
-+ ret = pmic_spmi_load_revid(regmap, &sdev->dev, &ctx->pmic);
-+ if (ret < 0)
-+ return ret;
-+ }
-+ spmi_device_set_drvdata(sdev, ctx);
-
- return devm_of_platform_populate(&sdev->dev);
- }
---- /dev/null
-+++ b/include/soc/qcom/qcom-spmi-pmic.h
-@@ -0,0 +1,60 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/* Copyright (c) 2022 Linaro. All rights reserved.
-+ * Author: Caleb Connolly <caleb.connolly@linaro.org>
-+ */
-+
-+#ifndef __QCOM_SPMI_PMIC_H__
-+#define __QCOM_SPMI_PMIC_H__
-+
-+#include <linux/device.h>
-+
-+#define COMMON_SUBTYPE 0x00
-+#define PM8941_SUBTYPE 0x01
-+#define PM8841_SUBTYPE 0x02
-+#define PM8019_SUBTYPE 0x03
-+#define PM8226_SUBTYPE 0x04
-+#define PM8110_SUBTYPE 0x05
-+#define PMA8084_SUBTYPE 0x06
-+#define PMI8962_SUBTYPE 0x07
-+#define PMD9635_SUBTYPE 0x08
-+#define PM8994_SUBTYPE 0x09
-+#define PMI8994_SUBTYPE 0x0a
-+#define PM8916_SUBTYPE 0x0b
-+#define PM8004_SUBTYPE 0x0c
-+#define PM8909_SUBTYPE 0x0d
-+#define PM8028_SUBTYPE 0x0e
-+#define PM8901_SUBTYPE 0x0f
-+#define PM8950_SUBTYPE 0x10
-+#define PMI8950_SUBTYPE 0x11
-+#define PM8998_SUBTYPE 0x14
-+#define PMI8998_SUBTYPE 0x15
-+#define PM8005_SUBTYPE 0x18
-+#define PM660L_SUBTYPE 0x1A
-+#define PM660_SUBTYPE 0x1B
-+#define PM8150_SUBTYPE 0x1E
-+#define PM8150L_SUBTYPE 0x1f
-+#define PM8150B_SUBTYPE 0x20
-+#define PMK8002_SUBTYPE 0x21
-+#define PM8009_SUBTYPE 0x24
-+#define PM8150C_SUBTYPE 0x26
-+#define SMB2351_SUBTYPE 0x29
-+
-+#define PMI8998_FAB_ID_SMIC 0x11
-+#define PMI8998_FAB_ID_GF 0x30
-+
-+#define PM660_FAB_ID_GF 0x0
-+#define PM660_FAB_ID_TSMC 0x2
-+#define PM660_FAB_ID_MX 0x3
-+
-+struct qcom_spmi_pmic {
-+ unsigned int type;
-+ unsigned int subtype;
-+ unsigned int major;
-+ unsigned int minor;
-+ unsigned int rev2;
-+ const char *name;
-+};
-+
-+const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev);
-+
-+#endif /* __QCOM_SPMI_PMIC_H__ */
diff --git a/target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch b/target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch
deleted file mode 100644
index ecf8772bfd..0000000000
--- a/target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 0c309f4e86c827cd5fd2eb0e36d5d1f19927380d Mon Sep 17 00:00:00 2001
-From: Caleb Connolly <caleb.connolly@linaro.org>
-Date: Fri, 29 Apr 2022 23:08:58 +0100
-Subject: [PATCH] mfd: qcom-spmi-pmic: read fab id on supported PMICs
-
-The PMI8998 and PM660 expose the fab_id, this is needed by drivers like
-the RRADC to calibrate ADC values.
-
-Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Acked-by: Lee Jones <lee.jones@linaro.org>
-Link: https://lore.kernel.org/r/20220429220904.137297-4-caleb.connolly@linaro.org
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- drivers/mfd/qcom-spmi-pmic.c | 7 +++++++
- include/soc/qcom/qcom-spmi-pmic.h | 1 +
- 2 files changed, 8 insertions(+)
-
---- a/drivers/mfd/qcom-spmi-pmic.c
-+++ b/drivers/mfd/qcom-spmi-pmic.c
-@@ -19,6 +19,7 @@
- #define PMIC_REV4 0x103
- #define PMIC_TYPE 0x104
- #define PMIC_SUBTYPE 0x105
-+#define PMIC_FAB_ID 0x1f2
-
- #define PMIC_TYPE_VALUE 0x51
-
-@@ -157,6 +158,12 @@ static int pmic_spmi_load_revid(struct r
- if (ret < 0)
- return ret;
-
-+ if (pmic->subtype == PMI8998_SUBTYPE || pmic->subtype == PM660_SUBTYPE) {
-+ ret = regmap_read(map, PMIC_FAB_ID, &pmic->fab_id);
-+ if (ret < 0)
-+ return ret;
-+ }
-+
- /*
- * In early versions of PM8941 and PM8226, the major revision number
- * started incrementing from 0 (eg 0 = v1.0, 1 = v2.0).
---- a/include/soc/qcom/qcom-spmi-pmic.h
-+++ b/include/soc/qcom/qcom-spmi-pmic.h
-@@ -52,6 +52,7 @@ struct qcom_spmi_pmic {
- unsigned int major;
- unsigned int minor;
- unsigned int rev2;
-+ unsigned int fab_id;
- const char *name;
- };
-
diff --git a/target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch b/target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch
deleted file mode 100644
index 109a08aea3..0000000000
--- a/target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 46878413ba10170aaa9b7c797816e928a11923e3 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:18:12 +0200
-Subject: [PATCH] mfd: qcom-spmi-pmic: Add support for PMP8074
-
-Add support for PMP8074 PMIC which is a companion PMIC for the Qualcomm
-IPQ8074 SoC-s.
-
-It shares the same subtype identifier as PM8901.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/20220818221815.346233-2-robimarko@gmail.com
----
- drivers/mfd/qcom-spmi-pmic.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mfd/qcom-spmi-pmic.c
-+++ b/drivers/mfd/qcom-spmi-pmic.c
-@@ -60,6 +60,7 @@ static const struct of_device_id pmic_sp
- { .compatible = "qcom,pmi8994", .data = N_USIDS(2) },
- { .compatible = "qcom,pmi8998", .data = N_USIDS(2) },
- { .compatible = "qcom,pmk8002", .data = N_USIDS(2) },
-+ { .compatible = "qcom,pmp8074", .data = N_USIDS(2) },
- { .compatible = "qcom,smb2351", .data = N_USIDS(2) },
- { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) },
- { }
diff --git a/target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch b/target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch
deleted file mode 100644
index b0dbe7d088..0000000000
--- a/target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From dedc087d43013ab6043dd1da4cd585dd4242a6bb Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 4 Jul 2022 23:23:54 +0200
-Subject: [PATCH] regulator: qcom_spmi: add support for HT_P150
-
-HT_P150 is a LDO PMOS regulator based on LV P150 using HFS430 layout
-found in PMP8074 and PMS405 PMIC-s.
-
-Both PMP8074 and PMS405 define the programmable range as 1.616V to 3.304V
-but the actual MAX output voltage depends on the exact LDO in each of
-the PMIC-s.
-
-It has a max current of 150mA, voltage step of 8mV.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Link: https://lore.kernel.org/r/20220704212402.1715182-4-robimarko@gmail.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/qcom_spmi-regulator.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/regulator/qcom_spmi-regulator.c
-+++ b/drivers/regulator/qcom_spmi-regulator.c
-@@ -164,6 +164,7 @@ enum spmi_regulator_subtype {
- SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3 = 0x0f,
- SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10,
- SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a,
-+ SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35,
- };
-
- enum spmi_common_regulator_registers {
-@@ -544,6 +545,10 @@ static struct spmi_voltage_range hfs430_
- SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000),
- };
-
-+static struct spmi_voltage_range ht_p150_ranges[] = {
-+ SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000),
-+};
-+
- static DEFINE_SPMI_SET_POINTS(pldo);
- static DEFINE_SPMI_SET_POINTS(nldo1);
- static DEFINE_SPMI_SET_POINTS(nldo2);
-@@ -564,6 +569,7 @@ static DEFINE_SPMI_SET_POINTS(nldo660);
- static DEFINE_SPMI_SET_POINTS(ht_lvpldo);
- static DEFINE_SPMI_SET_POINTS(ht_nldo);
- static DEFINE_SPMI_SET_POINTS(hfs430);
-+static DEFINE_SPMI_SET_POINTS(ht_p150);
-
- static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
- int len)
-@@ -1458,6 +1464,7 @@ static const struct regulator_ops spmi_h
-
- static const struct spmi_regulator_mapping supported_regulators[] = {
- /* type subtype dig_min dig_max ltype ops setpoints hpm_min */
-+ SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000),
- SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000),
- SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000),
- SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000),
diff --git a/target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch b/target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch
deleted file mode 100644
index 6b76f2c3fc..0000000000
--- a/target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 14789f38e03c42857613b69ff0f032e03653b246 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 4 Jul 2022 23:23:55 +0200
-Subject: [PATCH] regulator: qcom_spmi: add support for HT_P600
-
-HT_P600 is a LDO PMOS regulator based on LV P600 using HFS430 layout
-found in PMP8074 and PMS405 PMIC-s.
-
-Both PMP8074 and PMS405 define the programmable range as 1.704 to 1.896V
-but the actual MAX output voltage depends on the exact LDO in each of
-the PMIC-s.
-Their usual voltage that they are used is 1.8V.
-
-It has a max current of 600mA, voltage step of 8mV.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Link: https://lore.kernel.org/r/20220704212402.1715182-5-robimarko@gmail.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/qcom_spmi-regulator.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/regulator/qcom_spmi-regulator.c
-+++ b/drivers/regulator/qcom_spmi-regulator.c
-@@ -165,6 +165,7 @@ enum spmi_regulator_subtype {
- SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10,
- SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a,
- SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35,
-+ SPMI_REGULATOR_SUBTYPE_HT_P600 = 0x3d,
- };
-
- enum spmi_common_regulator_registers {
-@@ -549,6 +550,10 @@ static struct spmi_voltage_range ht_p150
- SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000),
- };
-
-+static struct spmi_voltage_range ht_p600_ranges[] = {
-+ SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000),
-+};
-+
- static DEFINE_SPMI_SET_POINTS(pldo);
- static DEFINE_SPMI_SET_POINTS(nldo1);
- static DEFINE_SPMI_SET_POINTS(nldo2);
-@@ -570,6 +575,7 @@ static DEFINE_SPMI_SET_POINTS(ht_lvpldo)
- static DEFINE_SPMI_SET_POINTS(ht_nldo);
- static DEFINE_SPMI_SET_POINTS(hfs430);
- static DEFINE_SPMI_SET_POINTS(ht_p150);
-+static DEFINE_SPMI_SET_POINTS(ht_p600);
-
- static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
- int len)
-@@ -1464,6 +1470,7 @@ static const struct regulator_ops spmi_h
-
- static const struct spmi_regulator_mapping supported_regulators[] = {
- /* type subtype dig_min dig_max ltype ops setpoints hpm_min */
-+ SPMI_VREG(LDO, HT_P600, 0, INF, HFS430, hfs430, ht_p600, 10000),
- SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000),
- SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000),
- SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000),
diff --git a/target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch b/target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch
deleted file mode 100644
index ce6985b13b..0000000000
--- a/target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 3e3da8da25f81fa3f0f3a37f60d10b17d1166864 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 4 Jul 2022 23:23:57 +0200
-Subject: [PATCH] regulator: qcom_spmi: add support for PMP8074 regulators
-
-PMP8074 is a companion PMIC for the Qualcomm IPQ8074 WiSoC-s.
-
-It features 5 HF-SMPS and 13 LDO regulators.
-
-HF-SMPS regulators are Buck HFS430 regulators.
-L1, L2 and L3 are HT_N1200_ST subtype LDO regulators.
-L4 is HT_N300_ST subtype LDO regulator.
-L5 and L6 are HT_P600 subtype LDO regulators.
-L7, L11, L12 and L13 are HT_P150 subtype LDO regulators.
-L10 is HT_P50 subtype LDO regulator.
-
-This commit adds support for all of the buck regulators and LDO-s except
-for L10 as I dont have documentation on its output voltage range.
-
-S3 is the CPU cluster voltage supply, S4 supplies the UBI32 NPU cores
-and L11 is the SDIO/eMMC I/O voltage regulator required for high speeds.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Link: https://lore.kernel.org/r/20220704212402.1715182-7-robimarko@gmail.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/qcom_spmi-regulator.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/drivers/regulator/qcom_spmi-regulator.c
-+++ b/drivers/regulator/qcom_spmi-regulator.c
-@@ -2101,6 +2101,28 @@ static const struct spmi_regulator_data
- { }
- };
-
-+static const struct spmi_regulator_data pmp8074_regulators[] = {
-+ { "s1", 0x1400, "vdd_s1"},
-+ { "s2", 0x1700, "vdd_s2"},
-+ { "s3", 0x1a00, "vdd_s3"},
-+ { "s4", 0x1d00, "vdd_s4"},
-+ { "s5", 0x2000, "vdd_s5"},
-+ { "l1", 0x4000, "vdd_l1_l2"},
-+ { "l2", 0x4100, "vdd_l1_l2"},
-+ { "l3", 0x4200, "vdd_l3_l8"},
-+ { "l4", 0x4300, "vdd_l4"},
-+ { "l5", 0x4400, "vdd_l5_l6_l15"},
-+ { "l6", 0x4500, "vdd_l5_l6_l15"},
-+ { "l7", 0x4600, "vdd_l7"},
-+ { "l8", 0x4700, "vdd_l3_l8"},
-+ { "l9", 0x4800, "vdd_l9"},
-+ /* l10 is currently unsupported HT_P50 */
-+ { "l11", 0x4a00, "vdd_l10_l11_l12_l13"},
-+ { "l12", 0x4b00, "vdd_l10_l11_l12_l13"},
-+ { "l13", 0x4c00, "vdd_l10_l11_l12_l13"},
-+ { }
-+};
-+
- static const struct spmi_regulator_data pms405_regulators[] = {
- { "s3", 0x1a00, "vdd_s3"},
- { }
-@@ -2117,6 +2139,7 @@ static const struct of_device_id qcom_sp
- { .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
- { .compatible = "qcom,pm660-regulators", .data = &pm660_regulators },
- { .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators },
-+ { .compatible = "qcom,pmp8074-regulators", .data = &pmp8074_regulators },
- { .compatible = "qcom,pms405-regulators", .data = &pms405_regulators },
- { }
- };
diff --git a/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch b/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch
deleted file mode 100644
index ba3d1750e1..0000000000
--- a/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 204cd3516f59eb7040b814429187e674f49ba065 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 11 Jul 2022 22:34:05 +0200
-Subject: [PATCH] pinctrl: qcom-pmic-gpio: add support for PMP8074
-
-PMP8074 has 12 GPIO-s with holes on GPIO1 and GPIO12.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Link: https://lore.kernel.org/r/20220711203408.2949888-4-robimarko@gmail.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
-+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
-@@ -1167,6 +1167,8 @@ static const struct of_device_id pmic_gp
- { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
- { .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 },
- { .compatible = "qcom,pmm8155au-gpio", .data = (void *) 10 },
-+ /* pmp8074 has 12 GPIOs with holes on 1 and 12 */
-+ { .compatible = "qcom,pmp8074-gpio", .data = (void *) 12 },
- { .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 },
- { .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 },
- /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
diff --git a/target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch b/target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch
deleted file mode 100644
index 306f0dd253..0000000000
--- a/target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 41a02abb863edca0de0373bc3deaf0639b18c589 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:18:13 +0200
-Subject: [PATCH] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5
-
-Add support for ADC5_VREF_VADC channel to rev2 ADC5 channel list.
-This channel measures the VADC reference LDO output.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Link: https://lore.kernel.org/r/20220818221815.346233-3-robimarko@gmail.com
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- drivers/iio/adc/qcom-spmi-adc5.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/iio/adc/qcom-spmi-adc5.c
-+++ b/drivers/iio/adc/qcom-spmi-adc5.c
-@@ -589,6 +589,8 @@ static const struct adc5_channels adc5_c
- SCALE_HW_CALIB_DEFAULT)
- [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0,
- SCALE_HW_CALIB_DEFAULT)
-+ [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0,
-+ SCALE_HW_CALIB_DEFAULT)
- [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1,
- SCALE_HW_CALIB_DEFAULT)
- [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1,
diff --git a/target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch b/target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch
deleted file mode 100644
index cd146420cf..0000000000
--- a/target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From fb76b808f8628215afebaf0f8af0bde635302590 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:18:14 +0200
-Subject: [PATCH] arm64: dts: qcom: add PMP8074 DTSI
-
-PMP8074 is a companion PMIC to the Qualcomm IPQ8074 series that is
-controlled via SPMI.
-
-Add DTSI for it providing GPIO, regulator, RTC and VADC support.
-
-RTC is disabled by default as there is no built-in battery so it will
-loose time unless board vendor added a battery, so make it optional.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818221815.346233-4-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/pmp8074.dtsi | 125 ++++++++++++++++++++++++++
- 1 file changed, 125 insertions(+)
- create mode 100644 arch/arm64/boot/dts/qcom/pmp8074.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
-@@ -0,0 +1,125 @@
-+// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
-+
-+#include <dt-bindings/spmi/spmi.h>
-+#include <dt-bindings/iio/qcom,spmi-vadc.h>
-+
-+&spmi_bus {
-+ pmic@0 {
-+ compatible = "qcom,pmp8074", "qcom,spmi-pmic";
-+ reg = <0x0 SPMI_USID>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ pmp8074_adc: adc@3100 {
-+ compatible = "qcom,spmi-adc-rev2";
-+ reg = <0x3100>;
-+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ #io-channel-cells = <1>;
-+
-+ ref-gnd@0 {
-+ reg = <ADC5_REF_GND>;
-+ qcom,pre-scaling = <1 1>;
-+ };
-+
-+ vref-1p25@1 {
-+ reg = <ADC5_1P25VREF>;
-+ qcom,pre-scaling = <1 1>;
-+ };
-+
-+ vref-vadc@2 {
-+ reg = <ADC5_VREF_VADC>;
-+ qcom,pre-scaling = <1 1>;
-+ };
-+
-+ pmic_die: die-temp@6 {
-+ reg = <ADC5_DIE_TEMP>;
-+ qcom,pre-scaling = <1 1>;
-+ };
-+
-+ xo_therm: xo-temp@76 {
-+ reg = <ADC5_XO_THERM_100K_PU>;
-+ qcom,ratiometric;
-+ qcom,hw-settle-time = <200>;
-+ qcom,pre-scaling = <1 1>;
-+ };
-+
-+ pa_therm1: thermistor1@77 {
-+ reg = <ADC5_AMUX_THM1_100K_PU>;
-+ qcom,ratiometric;
-+ qcom,hw-settle-time = <200>;
-+ qcom,pre-scaling = <1 1>;
-+ };
-+
-+ pa_therm2: thermistor2@78 {
-+ reg = <ADC5_AMUX_THM2_100K_PU>;
-+ qcom,ratiometric;
-+ qcom,hw-settle-time = <200>;
-+ qcom,pre-scaling = <1 1>;
-+ };
-+
-+ pa_therm3: thermistor3@79 {
-+ reg = <ADC5_AMUX_THM3_100K_PU>;
-+ qcom,ratiometric;
-+ qcom,hw-settle-time = <200>;
-+ qcom,pre-scaling = <1 1>;
-+ };
-+
-+ vph-pwr@131 {
-+ reg = <ADC5_VPH_PWR>;
-+ qcom,pre-scaling = <1 3>;
-+ };
-+ };
-+
-+ pmp8074_rtc: rtc@6000 {
-+ compatible = "qcom,pm8941-rtc";
-+ reg = <0x6000>;
-+ reg-names = "rtc", "alarm";
-+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
-+ allow-set-time;
-+ status = "disabled";
-+ };
-+
-+ pmp8074_gpios: gpio@c000 {
-+ compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio";
-+ reg = <0xc000>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ gpio-ranges = <&pmp8074_gpios 0 0 12>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ };
-+ };
-+
-+ pmic@1 {
-+ compatible = "qcom,pmp8074", "qcom,spmi-pmic";
-+ reg = <0x1 SPMI_USID>;
-+
-+ regulators {
-+ compatible = "qcom,pmp8074-regulators";
-+
-+ s3: s3 {
-+ regulator-name = "vdd_s3";
-+ regulator-min-microvolt = <592000>;
-+ regulator-max-microvolt = <1064000>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ s4: s4 {
-+ regulator-name = "vdd_s4";
-+ regulator-min-microvolt = <712000>;
-+ regulator-max-microvolt = <992000>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ l11: l11 {
-+ regulator-name = "l11";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+ };
-+ };
-+};
diff --git a/target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch b/target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch
deleted file mode 100644
index af65c0c979..0000000000
--- a/target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 2c394cfc1779886048feca7dc7f4075da5f6328c Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:18:15 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply
-
-Since now we have control over the PMP8074 PMIC providing various system
-voltages including L11 which provides the SDIO/eMMC I/O voltage set it as
-the SDHCI VQMMC supply.
-
-This allows SDHCI controller to switch to 1.8V I/O mode and support high
-speed modes like HS200 and HS400.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818221815.346233-5-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-@@ -3,6 +3,7 @@
- /* Copyright (c) 2017, The Linux Foundation. All rights reserved.
- */
- #include "ipq8074.dtsi"
-+#include "pmp8074.dtsi"
-
- / {
- model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
-@@ -82,6 +83,7 @@
-
- &sdhc_1 {
- status = "okay";
-+ vqmmc-supply = <&l11>;
- };
-
- &qusb_phy_0 {
diff --git a/target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch b/target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch
deleted file mode 100644
index 93c57d9ea9..0000000000
--- a/target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 82ceb86227b1fc15c76d5fc691b2bf425f1a63b3 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 7 Nov 2022 10:29:30 +0100
-Subject: [PATCH] arm64: dts: qcom: hk01: use GPIO flags for tlmm
-
-Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
-harcoding the cell value.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221107092930.33325-3-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-@@ -4,6 +4,7 @@
- */
- #include "ipq8074.dtsi"
- #include "pmp8074.dtsi"
-+#include <dt-bindings/gpio/gpio.h>
-
- / {
- model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
-@@ -50,12 +51,12 @@
-
- &pcie0 {
- status = "okay";
-- perst-gpios = <&tlmm 61 0x1>;
-+ perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
- };
-
- &pcie1 {
- status = "okay";
-- perst-gpios = <&tlmm 58 0x1>;
-+ perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
-
- &pcie_qmp0 {
diff --git a/target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch b/target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch
deleted file mode 100644
index a8bf2492f4..0000000000
--- a/target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 1b1c1423ca3e740984aa883512a72c4ea08fbe28 Mon Sep 17 00:00:00 2001
-From: Konrad Dybcio <konrad.dybcio@linaro.org>
-Date: Mon, 7 Nov 2022 15:55:17 +0100
-Subject: [PATCH] arm64: dts: qcom: ipq8074-*: Fix up comments
-
-Make sure all multiline C-style commends begin with just '/*' with
-the comment text starting on a new line.
-
-Also, fix up some whitespace within comments.
-
-Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221107145522.6706-8-konrad.dybcio@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 3 ++-
- arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts | 3 ++-
- arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts | 3 ++-
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++++------
- 4 files changed, 12 insertions(+), 9 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
-@@ -1,6 +1,7 @@
- // SPDX-License-Identifier: GPL-2.0-only
- /dts-v1/;
--/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
-+/*
-+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
- */
- #include "ipq8074.dtsi"
- #include "pmp8074.dtsi"
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
-@@ -1,5 +1,6 @@
- // SPDX-License-Identifier: GPL-2.0-only
--/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
-+/*
-+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
- */
- /dts-v1/;
-
---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
-+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
-@@ -1,6 +1,7 @@
- // SPDX-License-Identifier: GPL-2.0-only
- /dts-v1/;
--/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
-+/*
-+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
- */
- #include "ipq8074-hk10.dtsi"
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -129,10 +129,10 @@
- status = "disabled";
-
- usb1_ssphy: phy@58200 {
-- reg = <0x00058200 0x130>, /* Tx */
-+ reg = <0x00058200 0x130>, /* Tx */
- <0x00058400 0x200>, /* Rx */
-- <0x00058800 0x1f8>, /* PCS */
-- <0x00058600 0x044>; /* PCS misc*/
-+ <0x00058800 0x1f8>, /* PCS */
-+ <0x00058600 0x044>; /* PCS misc */
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB1_PIPE_CLK>;
-@@ -172,10 +172,10 @@
- status = "disabled";
-
- usb0_ssphy: phy@78200 {
-- reg = <0x00078200 0x130>, /* Tx */
-+ reg = <0x00078200 0x130>, /* Tx */
- <0x00078400 0x200>, /* Rx */
-- <0x00078800 0x1f8>, /* PCS */
-- <0x00078600 0x044>; /* PCS misc*/
-+ <0x00078800 0x1f8>, /* PCS */
-+ <0x00078600 0x044>; /* PCS misc */
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB0_PIPE_CLK>;
diff --git a/target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch b/target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch
deleted file mode 100644
index 1ce1140682..0000000000
--- a/target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 5f20690f77878b1ba24ec88df01b92d5131a6780 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 8 Nov 2022 15:23:57 +0100
-Subject: [PATCH] arm64: dts: qcom: ipq8074: align TLMM pin configuration with
- DT schema
-
-DT schema expects TLMM pin configuration nodes to be named with
-'-state' suffix and their optional children with '-pins' suffix.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221108142357.67202-2-krzysztof.kozlowski@linaro.org
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -318,35 +318,35 @@
- interrupt-controller;
- #interrupt-cells = <0x2>;
-
-- serial_4_pins: serial4-pinmux {
-+ serial_4_pins: serial4-state {
- pins = "gpio23", "gpio24";
- function = "blsp4_uart1";
- drive-strength = <8>;
- bias-disable;
- };
-
-- i2c_0_pins: i2c-0-pinmux {
-+ i2c_0_pins: i2c-0-state {
- pins = "gpio42", "gpio43";
- function = "blsp1_i2c";
- drive-strength = <8>;
- bias-disable;
- };
-
-- spi_0_pins: spi-0-pins {
-+ spi_0_pins: spi-0-state {
- pins = "gpio38", "gpio39", "gpio40", "gpio41";
- function = "blsp0_spi";
- drive-strength = <8>;
- bias-disable;
- };
-
-- hsuart_pins: hsuart-pins {
-+ hsuart_pins: hsuart-state {
- pins = "gpio46", "gpio47", "gpio48", "gpio49";
- function = "blsp2_uart";
- drive-strength = <8>;
- bias-disable;
- };
-
-- qpic_pins: qpic-pins {
-+ qpic_pins: qpic-state {
- pins = "gpio1", "gpio3", "gpio4",
- "gpio5", "gpio6", "gpio7",
- "gpio8", "gpio10", "gpio11",
diff --git a/target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch b/target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch
deleted file mode 100644
index ed1b063972..0000000000
--- a/target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From a212eb94fc9f72a126df651c5d7898feaea29526 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 5 Sep 2021 19:11:31 +0200
-Subject: [PATCH] soc: qcom: socinfo: Add IPQ8074 family ID-s
-
-IPQ8074 family SoC ID-s are missing, so lets add them based on
-the downstream driver.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Kathiravan T <kathirav@codeaurora.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20210905171131.660885-1-robimarko@gmail.com
----
- drivers/soc/qcom/socinfo.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/soc/qcom/socinfo.c
-+++ b/drivers/soc/qcom/socinfo.c
-@@ -281,19 +281,31 @@ static const struct soc_id soc_id[] = {
- { 319, "APQ8098" },
- { 321, "SDM845" },
- { 322, "MDM9206" },
-+ { 323, "IPQ8074" },
- { 324, "SDA660" },
- { 325, "SDM658" },
- { 326, "SDA658" },
- { 327, "SDA630" },
- { 338, "SDM450" },
- { 341, "SDA845" },
-+ { 342, "IPQ8072" },
-+ { 343, "IPQ8076" },
-+ { 344, "IPQ8078" },
- { 345, "SDM636" },
- { 346, "SDA636" },
- { 349, "SDM632" },
- { 350, "SDA632" },
- { 351, "SDA450" },
- { 356, "SM8250" },
-+ { 375, "IPQ8070" },
-+ { 376, "IPQ8071" },
-+ { 389, "IPQ8072A" },
-+ { 390, "IPQ8074A" },
-+ { 391, "IPQ8076A" },
-+ { 392, "IPQ8078A" },
- { 394, "SM6125" },
-+ { 395, "IPQ8070A" },
-+ { 396, "IPQ8071A" },
- { 402, "IPQ6018" },
- { 403, "IPQ6028" },
- { 421, "IPQ6000" },
diff --git a/target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch b/target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch
deleted file mode 100644
index 667c0cf7c7..0000000000
--- a/target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 2b0fe9137aa32d7fc367bf3a1cef4fa97ece6d58 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Tue, 23 Aug 2022 22:43:51 +0200
-Subject: [PATCH] phy: qcom-qmp-pcie: make pipe clock rate configurable
-
-IPQ8074 Gen3 PCIe PHY uses 250MHz as the pipe clock rate instead of 125MHz
-like every other PCIe QMP PHY does, so make it configurable as part of the
-qmp_phy_cfg.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Link: https://lore.kernel.org/r/20220621195512.1760362-1-robimarko@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/qualcomm/phy-qcom-qmp.c | 14 ++++++++++++--
- 1 file changed, 12 insertions(+), 2 deletions(-)
-
---- a/drivers/phy/qualcomm/phy-qcom-qmp.c
-+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
-@@ -2842,6 +2842,9 @@ struct qmp_phy_cfg {
- /* true, if PHY has secondary tx/rx lanes to be configured */
- bool is_dual_lane_phy;
-
-+ /* QMP PHY pipe clock interface rate */
-+ unsigned long pipe_clock_rate;
-+
- /* true, if PCS block has no separate SW_RESET register */
- bool no_pcs_sw_reset;
- };
-@@ -5139,8 +5142,15 @@ static int phy_pipe_clk_register(struct
-
- init.ops = &clk_fixed_rate_ops;
-
-- /* controllers using QMP phys use 125MHz pipe clock interface */
-- fixed->fixed_rate = 125000000;
-+ /*
-+ * Controllers using QMP PHY-s use 125MHz pipe clock interface
-+ * unless other frequency is specified in the PHY config.
-+ */
-+ if (qmp->phys[0]->cfg->pipe_clock_rate)
-+ fixed->fixed_rate = qmp->phys[0]->cfg->pipe_clock_rate;
-+ else
-+ fixed->fixed_rate = 125000000;
-+
- fixed->hw.init = &init;
-
- ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
diff --git a/target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch b/target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch
deleted file mode 100644
index 72aeef974e..0000000000
--- a/target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch
+++ /dev/null
@@ -1,200 +0,0 @@
-From 23bd21d8c05109b57aa9508e88fbdbc2b6d33de7 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Tue, 23 Aug 2022 22:47:40 +0200
-Subject: [PATCH] phy: qcom-qmp-pcie: add IPQ8074 PCIe Gen3 QMP PHY support
-
-IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3.
-Gen2 one is already supported, so add the support for the Gen3 one.
-It uses the same register layout as IPQ6018.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Link: https://lore.kernel.org/r/20220621195512.1760362-3-robimarko@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/qualcomm/phy-qcom-qmp.c | 160 ++++++++++++++++++++++++++++
- 1 file changed, 160 insertions(+)
-
---- a/drivers/phy/qualcomm/phy-qcom-qmp.c
-+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
-@@ -812,6 +812,133 @@ static const struct qmp_phy_init_tbl ipq
- QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
- };
-
-+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_serdes_tbl[] = {
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x31),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x01),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_MAP, 0x04),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER1, 0xff),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER2, 0x3f),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x30),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x21),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x82),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x03),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0x355),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0x35555),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x1a),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0x1a0a),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0xb),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE0, 0x0),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0x40),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x20),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV, 0xa),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TIMER, 0xa),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x1),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x68),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x2),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x2aa),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x2aaab),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x34),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0x3414),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x0b),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE1, 0x0),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0x40),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x0),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE0, 0x19),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE1, 0x28),
-+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
-+};
-+
-+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_tx_tbl[] = {
-+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
-+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
-+ QMP_PHY_INIT_CFG(QSERDES_TX0_HIGHZ_DRVR_EN, 0x10),
-+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
-+};
-+
-+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_rx_tbl[] = {
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0xe),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x4),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x2),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
-+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
-+};
-+
-+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_pcs_tbl[] = {
-+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL2, 0x83),
-+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_L, 0x9),
-+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_H_TOL, 0x42),
-+ QMP_PHY_INIT_CFG(PCS_COM_FLL_MAN_CODE, 0x40),
-+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
-+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_H, 0x0),
-+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x1),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x0),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H, 0x00),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H, 0x00),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG2, 0xb),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_CONFIG2, 0x52),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG2, 0x50),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG4, 0x1a),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x6),
-+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
-+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
-+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
-+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
-+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
-+};
-+
- static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
- QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
- QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
-@@ -3168,6 +3295,36 @@ static const struct qmp_phy_cfg ipq8074_
- .pwrdn_delay_max = 1005, /* us */
- };
-
-+static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
-+ .type = PHY_TYPE_PCIE,
-+ .nlanes = 1,
-+
-+ .serdes_tbl = ipq8074_pcie_gen3_serdes_tbl,
-+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_serdes_tbl),
-+ .tx_tbl = ipq8074_pcie_gen3_tx_tbl,
-+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl),
-+ .rx_tbl = ipq8074_pcie_gen3_rx_tbl,
-+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_rx_tbl),
-+ .pcs_tbl = ipq8074_pcie_gen3_pcs_tbl,
-+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_pcs_tbl),
-+ .clk_list = ipq8074_pciephy_clk_l,
-+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
-+ .reset_list = ipq8074_pciephy_reset_l,
-+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
-+ .vreg_list = NULL,
-+ .num_vregs = 0,
-+ .regs = ipq_pciephy_gen3_regs_layout,
-+
-+ .start_ctrl = SERDES_START | PCS_START,
-+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
-+
-+ .has_pwrdn_delay = true,
-+ .pwrdn_delay_min = 995, /* us */
-+ .pwrdn_delay_max = 1005, /* us */
-+
-+ .pipe_clock_rate = 250000000,
-+};
-+
- static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
- .type = PHY_TYPE_PCIE,
- .nlanes = 1,
-@@ -5571,6 +5728,9 @@ static const struct of_device_id qcom_qm
- .compatible = "qcom,ipq8074-qmp-pcie-phy",
- .data = &ipq8074_pciephy_cfg,
- }, {
-+ .compatible = "qcom,ipq8074-qmp-gen3-pcie-phy",
-+ .data = &ipq8074_pciephy_gen3_cfg,
-+ }, {
- .compatible = "qcom,ipq6018-qmp-pcie-phy",
- .data = &ipq6018_pciephy_cfg,
- }, {
diff --git a/target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch b/target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch
deleted file mode 100644
index 626507abb2..0000000000
--- a/target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 8df9fefd1d04f6f97f6015d7347104f69e6ea580 Mon Sep 17 00:00:00 2001
-From: Baruch Siach <baruch.siach@siklu.com>
-Date: Tue, 21 Jun 2022 11:54:52 +0300
-Subject: [PATCH] PCI: dwc: Move GEN3_RELATED DBI definitions to common header
-
-These are common dwc macros that will be used for other platforms.
-
-Link: https://lore.kernel.org/r/1c2d5a7a139be81fa15f356b2380163dbdebdc09.1655799816.git.baruch@tkos.co.il
-Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
----
- drivers/pci/controller/dwc/pcie-designware.h | 6 ++++++
- drivers/pci/controller/dwc/pcie-tegra194.c | 6 ------
- 2 files changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/controller/dwc/pcie-designware.h
-+++ b/drivers/pci/controller/dwc/pcie-designware.h
-@@ -74,6 +74,12 @@
- #define PCIE_MSI_INTR0_MASK 0x82C
- #define PCIE_MSI_INTR0_STATUS 0x830
-
-+#define GEN3_RELATED_OFF 0x890
-+#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0)
-+#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16)
-+#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24
-+#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24)
-+
- #define PCIE_PORT_MULTI_LANE_CTRL 0x8C0
- #define PORT_MLTI_UPCFG_SUPPORT BIT(7)
-
---- a/drivers/pci/controller/dwc/pcie-tegra194.c
-+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
-@@ -193,12 +193,6 @@
- #define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK GENMASK(23, 8)
- #define GEN3_EQ_CONTROL_OFF_FB_MODE_MASK GENMASK(3, 0)
-
--#define GEN3_RELATED_OFF 0x890
--#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0)
--#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16)
--#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24
--#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24)
--
- #define PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT 0x8D0
- #define AMBA_ERROR_RESPONSE_CRS_SHIFT 3
- #define AMBA_ERROR_RESPONSE_CRS_MASK GENMASK(1, 0)
diff --git a/target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch b/target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch
deleted file mode 100644
index bc1464b126..0000000000
--- a/target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From d568739f1c21e1768a887ff85611769f782eb64f Mon Sep 17 00:00:00 2001
-From: Baruch Siach <baruch.siach@siklu.com>
-Date: Tue, 21 Jun 2022 11:54:53 +0300
-Subject: [PATCH] PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_*
-
-The PCIE_CAP_LINK1_VAL macro actually defines slot capabilities. Use
-PCI_EXP_SLTCAP_* macros to spell its value, and rename it to better
-describe its meaning.
-
-Link: https://lore.kernel.org/r/3025d5e1d8da64798db6958f9780c4763fbcac47.1655799816.git.baruch@tkos.co.il
-Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
----
- drivers/pci/controller/dwc/pcie-qcom.c | 17 +++++++++++++++--
- 1 file changed, 15 insertions(+), 2 deletions(-)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -69,7 +69,20 @@
- #define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
- #define CFG_BRIDGE_SB_INIT BIT(0)
-
--#define PCIE_CAP_LINK1_VAL 0x2FD7F
-+#define PCIE_CAP_SLOT_POWER_LIMIT_VAL FIELD_PREP(PCI_EXP_SLTCAP_SPLV, \
-+ 250)
-+#define PCIE_CAP_SLOT_POWER_LIMIT_SCALE FIELD_PREP(PCI_EXP_SLTCAP_SPLS, \
-+ 1)
-+#define PCIE_CAP_SLOT_VAL (PCI_EXP_SLTCAP_ABP | \
-+ PCI_EXP_SLTCAP_PCP | \
-+ PCI_EXP_SLTCAP_MRLSP | \
-+ PCI_EXP_SLTCAP_AIP | \
-+ PCI_EXP_SLTCAP_PIP | \
-+ PCI_EXP_SLTCAP_HPS | \
-+ PCI_EXP_SLTCAP_HPC | \
-+ PCI_EXP_SLTCAP_EIP | \
-+ PCIE_CAP_SLOT_POWER_LIMIT_VAL | \
-+ PCIE_CAP_SLOT_POWER_LIMIT_SCALE)
-
- #define PCIE20_PARF_Q2A_FLUSH 0x1AC
-
-@@ -1125,7 +1138,7 @@ static int qcom_pcie_post_init_2_3_3(str
-
- writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND);
- writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG);
-- writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
-+ writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
-
- val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
- val &= ~PCI_EXP_LNKCAP_ASPMS;
diff --git a/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch b/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch
deleted file mode 100644
index b29512fb76..0000000000
--- a/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 180ce25d5c3ccff206f084b7ab350778641d1b1c Mon Sep 17 00:00:00 2001
-From: Prasad Malisetty <pmaliset@codeaurora.org>
-Date: Thu, 7 Oct 2021 23:18:42 +0530
-Subject: [PATCH] PCI: qcom: Replace ops with struct pcie_cfg in pcie match
- data
-
-Add struct qcom_pcie_cfg as match data for all platforms. Assign
-appropriate platform ops into struct qcom_pcie_cfg and read using
-of_device_get_match_data() in qcom_pcie_probe().
-
-Link: https://lore.kernel.org/r/1633628923-25047-5-git-send-email-pmaliset@codeaurora.org
-Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Stephen Boyd <swboyd@chromium.org>
----
- drivers/pci/controller/dwc/pcie-qcom.c | 66 +++++++++++++++++++++-----
- 1 file changed, 55 insertions(+), 11 deletions(-)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -202,6 +202,10 @@ struct qcom_pcie_ops {
- int (*config_sid)(struct qcom_pcie *pcie);
- };
-
-+struct qcom_pcie_cfg {
-+ const struct qcom_pcie_ops *ops;
-+};
-+
- struct qcom_pcie {
- struct dw_pcie *pci;
- void __iomem *parf; /* DT parf */
-@@ -1467,6 +1471,38 @@ static const struct qcom_pcie_ops ops_1_
- .config_sid = qcom_pcie_config_sid_sm8250,
- };
-
-+static const struct qcom_pcie_cfg apq8084_cfg = {
-+ .ops = &ops_1_0_0,
-+};
-+
-+static const struct qcom_pcie_cfg ipq8064_cfg = {
-+ .ops = &ops_2_1_0,
-+};
-+
-+static const struct qcom_pcie_cfg msm8996_cfg = {
-+ .ops = &ops_2_3_2,
-+};
-+
-+static const struct qcom_pcie_cfg ipq8074_cfg = {
-+ .ops = &ops_2_3_3,
-+};
-+
-+static const struct qcom_pcie_cfg ipq4019_cfg = {
-+ .ops = &ops_2_4_0,
-+};
-+
-+static const struct qcom_pcie_cfg sdm845_cfg = {
-+ .ops = &ops_2_7_0,
-+};
-+
-+static const struct qcom_pcie_cfg sm8250_cfg = {
-+ .ops = &ops_1_9_0,
-+};
-+
-+static const struct qcom_pcie_cfg sc7280_cfg = {
-+ .ops = &ops_1_9_0,
-+};
-+
- static const struct dw_pcie_ops dw_pcie_ops = {
- .link_up = qcom_pcie_link_up,
- .start_link = qcom_pcie_start_link,
-@@ -1478,6 +1514,7 @@ static int qcom_pcie_probe(struct platfo
- struct pcie_port *pp;
- struct dw_pcie *pci;
- struct qcom_pcie *pcie;
-+ const struct qcom_pcie_cfg *pcie_cfg;
- int ret;
-
- pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
-@@ -1499,7 +1536,13 @@ static int qcom_pcie_probe(struct platfo
-
- pcie->pci = pci;
-
-- pcie->ops = of_device_get_match_data(dev);
-+ pcie_cfg = of_device_get_match_data(dev);
-+ if (!pcie_cfg || !pcie_cfg->ops) {
-+ dev_err(dev, "Invalid platform data\n");
-+ return -EINVAL;
-+ }
-+
-+ pcie->ops = pcie_cfg->ops;
-
- pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
- if (IS_ERR(pcie->reset)) {
-@@ -1555,16 +1598,17 @@ err_pm_runtime_put:
- }
-
- static const struct of_device_id qcom_pcie_match[] = {
-- { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
-- { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
-- { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
-- { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
-- { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
-- { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
-- { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 },
-- { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 },
-- { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 },
-- { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 },
-+ { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg },
-+ { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg },
-+ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg },
-+ { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg },
-+ { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg },
-+ { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg },
-+ { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg },
-+ { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg },
-+ { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
-+ { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
-+ { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
- { }
- };
-
diff --git a/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch b/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch
deleted file mode 100644
index af8ba2a4e1..0000000000
--- a/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch
+++ /dev/null
@@ -1,220 +0,0 @@
-From a7d96ca20847ade9f29cff4521f43b8ae968b3df Mon Sep 17 00:00:00 2001
-From: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
-Date: Tue, 21 Jun 2022 11:54:54 +0300
-Subject: [PATCH] PCI: qcom: Add IPQ60xx support
-
-IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that
-platform.
-
-The code is based on downstream[1] Codeaurora kernel v5.4 (branch
-win.linuxopenwrt.2.0).
-
-Split out the DBI registers access part from .init into .post_init. DBI
-registers are only accessible after phy_power_on().
-
-[1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/
-
-Link: https://lore.kernel.org/r/f7f848653c99abbf9a0f877949a44e52329543ae.1655799816.git.baruch@tkos.co.il
-Tested-by: Robert Marko <robert.marko@sartura.hr>
-Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
-Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
-Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
----
- drivers/pci/controller/dwc/pcie-designware.h | 1 +
- drivers/pci/controller/dwc/pcie-qcom.c | 130 +++++++++++++++++++
- 2 files changed, 131 insertions(+)
-
---- a/drivers/pci/controller/dwc/pcie-designware.h
-+++ b/drivers/pci/controller/dwc/pcie-designware.h
-@@ -76,6 +76,7 @@
-
- #define GEN3_RELATED_OFF 0x890
- #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0)
-+#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13)
- #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16)
- #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24
- #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24)
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -52,6 +52,10 @@
- #define PCIE20_PARF_DBI_BASE_ADDR 0x168
- #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C
- #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
-+#define AHB_CLK_EN BIT(0)
-+#define MSTR_AXI_CLK_EN BIT(1)
-+#define BYPASS BIT(4)
-+
- #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
- #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8
- #define PCIE20_PARF_LTSSM 0x1B0
-@@ -181,6 +185,11 @@ struct qcom_pcie_resources_2_7_0 {
- struct clk *pipe_clk;
- };
-
-+struct qcom_pcie_resources_2_9_0 {
-+ struct clk_bulk_data clks[5];
-+ struct reset_control *rst;
-+};
-+
- union qcom_pcie_resources {
- struct qcom_pcie_resources_1_0_0 v1_0_0;
- struct qcom_pcie_resources_2_1_0 v2_1_0;
-@@ -188,6 +197,7 @@ union qcom_pcie_resources {
- struct qcom_pcie_resources_2_3_3 v2_3_3;
- struct qcom_pcie_resources_2_4_0 v2_4_0;
- struct qcom_pcie_resources_2_7_0 v2_7_0;
-+ struct qcom_pcie_resources_2_9_0 v2_9_0;
- };
-
- struct qcom_pcie;
-@@ -1280,6 +1290,112 @@ static void qcom_pcie_post_deinit_2_7_0(
- clk_disable_unprepare(res->pipe_clk);
- }
-
-+static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie)
-+{
-+ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
-+ struct dw_pcie *pci = pcie->pci;
-+ struct device *dev = pci->dev;
-+ int ret;
-+
-+ res->clks[0].id = "iface";
-+ res->clks[1].id = "axi_m";
-+ res->clks[2].id = "axi_s";
-+ res->clks[3].id = "axi_bridge";
-+ res->clks[4].id = "rchng";
-+
-+ ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks);
-+ if (ret < 0)
-+ return ret;
-+
-+ res->rst = devm_reset_control_array_get_exclusive(dev);
-+ if (IS_ERR(res->rst))
-+ return PTR_ERR(res->rst);
-+
-+ return 0;
-+}
-+
-+static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie)
-+{
-+ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
-+
-+ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
-+}
-+
-+static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie)
-+{
-+ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
-+ struct device *dev = pcie->pci->dev;
-+ int ret;
-+
-+ ret = reset_control_assert(res->rst);
-+ if (ret) {
-+ dev_err(dev, "reset assert failed (%d)\n", ret);
-+ return ret;
-+ }
-+
-+ /*
-+ * Delay periods before and after reset deassert are working values
-+ * from downstream Codeaurora kernel
-+ */
-+ usleep_range(2000, 2500);
-+
-+ ret = reset_control_deassert(res->rst);
-+ if (ret) {
-+ dev_err(dev, "reset deassert failed (%d)\n", ret);
-+ return ret;
-+ }
-+
-+ usleep_range(2000, 2500);
-+
-+ return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
-+}
-+
-+static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
-+{
-+ struct dw_pcie *pci = pcie->pci;
-+ u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
-+ u32 val;
-+ int i;
-+
-+ writel(SLV_ADDR_SPACE_SZ,
-+ pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
-+
-+ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-+ val &= ~BIT(0);
-+ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
-+
-+ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
-+
-+ writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);
-+ writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN,
-+ pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
-+ writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS |
-+ GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL,
-+ pci->dbi_base + GEN3_RELATED_OFF);
-+
-+ writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS |
-+ SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS |
-+ AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS,
-+ pcie->parf + PCIE20_PARF_SYS_CTRL);
-+
-+ writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH);
-+
-+ dw_pcie_dbi_ro_wr_en(pci);
-+ writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
-+
-+ val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
-+ val &= ~PCI_EXP_LNKCAP_ASPMS;
-+ writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
-+
-+ writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
-+ PCI_EXP_DEVCTL2);
-+
-+ for (i = 0; i < 256; i++)
-+ writel(0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N + (4 * i));
-+
-+ return 0;
-+}
-+
- static int qcom_pcie_link_up(struct dw_pcie *pci)
- {
- u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
-@@ -1471,6 +1587,15 @@ static const struct qcom_pcie_ops ops_1_
- .config_sid = qcom_pcie_config_sid_sm8250,
- };
-
-+/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */
-+static const struct qcom_pcie_ops ops_2_9_0 = {
-+ .get_resources = qcom_pcie_get_resources_2_9_0,
-+ .init = qcom_pcie_init_2_9_0,
-+ .post_init = qcom_pcie_post_init_2_9_0,
-+ .deinit = qcom_pcie_deinit_2_9_0,
-+ .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-+};
-+
- static const struct qcom_pcie_cfg apq8084_cfg = {
- .ops = &ops_1_0_0,
- };
-@@ -1503,6 +1628,10 @@ static const struct qcom_pcie_cfg sc7280
- .ops = &ops_1_9_0,
- };
-
-+static const struct qcom_pcie_cfg ipq6018_cfg = {
-+ .ops = &ops_2_9_0,
-+};
-+
- static const struct dw_pcie_ops dw_pcie_ops = {
- .link_up = qcom_pcie_link_up,
- .start_link = qcom_pcie_start_link,
-@@ -1609,6 +1738,7 @@ static const struct of_device_id qcom_pc
- { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
- { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
- { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
-+ { .compatible = "qcom,pcie-ipq6018", .data = &ipq6018_cfg },
- { }
- };
-
diff --git a/target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch b/target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch
deleted file mode 100644
index 5300c36dce..0000000000
--- a/target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch
+++ /dev/null
@@ -1,288 +0,0 @@
-From e8e7ce92a49dc87f0d006cfbfe419b8e0b25476d Mon Sep 17 00:00:00 2001
-From: Bjorn Andersson <bjorn.andersson@linaro.org>
-Date: Tue, 26 Apr 2022 14:21:36 -0700
-Subject: [PATCH] clk: qcom: rcg2: Cache CFG register updates for parked RCGs
-
-As GDSCs are turned on and off some associated clocks are momentarily
-enabled for house keeping purposes. For this, and similar, purposes the
-"shared RCGs" will park the RCG on a source clock which is known to be
-available.
-When the RCG is parked, a safe clock source will be selected and
-committed, then the original source would be written back and upon enable
-the change back to the unparked source would be committed.
-
-But starting with SM8350 this fails, as the value in CFG is committed by
-the GDSC handshake and without a ticking parent the GDSC enablement will
-time out.
-
-This becomes a concrete problem if the runtime supended state of a
-device includes disabling such rcg's parent clock. As the device
-attempts to power up the domain again the rcg will fail to enable and
-hence the GDSC enablement will fail, preventing the device from
-returning from the suspended state.
-
-This can be seen in e.g. the display stack during probe on SM8350.
-
-To avoid this problem, the software needs to ensure that the RCG is
-configured to a active parent clock while it is disabled. This is done
-by caching the CFG register content while the shared RCG is parked on
-this safe source.
-
-Writes to M, N and D registers are committed as they are requested. New
-helpers for get_parent() and recalc_rate() are extracted from their
-previous implementations and __clk_rcg2_configure() is modified to allow
-it to operate on the cached value.
-
-Fixes: 7ef6f11887bd ("clk: qcom: Configure the RCGs to a safe source as needed")
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Reviewed-by: Stephen Boyd <sboyd@kernel.org>
-Link: https://lore.kernel.org/r/20220426212136.1543984-1-bjorn.andersson@linaro.org
----
- drivers/clk/qcom/clk-rcg.h | 2 +
- drivers/clk/qcom/clk-rcg2.c | 126 ++++++++++++++++++++++++++++--------
- 2 files changed, 101 insertions(+), 27 deletions(-)
-
---- a/drivers/clk/qcom/clk-rcg.h
-+++ b/drivers/clk/qcom/clk-rcg.h
-@@ -139,6 +139,7 @@ extern const struct clk_ops clk_dyn_rcg_
- * @freq_tbl: frequency table
- * @clkr: regmap clock handle
- * @cfg_off: defines the cfg register offset from the CMD_RCGR + CFG_REG
-+ * @parked_cfg: cached value of the CFG register for parked RCGs
- */
- struct clk_rcg2 {
- u32 cmd_rcgr;
-@@ -149,6 +150,7 @@ struct clk_rcg2 {
- const struct freq_tbl *freq_tbl;
- struct clk_regmap clkr;
- u8 cfg_off;
-+ u32 parked_cfg;
- };
-
- #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr)
---- a/drivers/clk/qcom/clk-rcg2.c
-+++ b/drivers/clk/qcom/clk-rcg2.c
-@@ -74,16 +74,11 @@ static int clk_rcg2_is_enabled(struct cl
- return (cmd & CMD_ROOT_OFF) == 0;
- }
-
--static u8 clk_rcg2_get_parent(struct clk_hw *hw)
-+static u8 __clk_rcg2_get_parent(struct clk_hw *hw, u32 cfg)
- {
- struct clk_rcg2 *rcg = to_clk_rcg2(hw);
- int num_parents = clk_hw_get_num_parents(hw);
-- u32 cfg;
-- int i, ret;
--
-- ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg);
-- if (ret)
-- goto err;
-+ int i;
-
- cfg &= CFG_SRC_SEL_MASK;
- cfg >>= CFG_SRC_SEL_SHIFT;
-@@ -92,12 +87,27 @@ static u8 clk_rcg2_get_parent(struct clk
- if (cfg == rcg->parent_map[i].cfg)
- return i;
-
--err:
- pr_debug("%s: Clock %s has invalid parent, using default.\n",
- __func__, clk_hw_get_name(hw));
- return 0;
- }
-
-+static u8 clk_rcg2_get_parent(struct clk_hw *hw)
-+{
-+ struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-+ u32 cfg;
-+ int ret;
-+
-+ ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg);
-+ if (ret) {
-+ pr_debug("%s: Unable to read CFG register for %s\n",
-+ __func__, clk_hw_get_name(hw));
-+ return 0;
-+ }
-+
-+ return __clk_rcg2_get_parent(hw, cfg);
-+}
-+
- static int update_config(struct clk_rcg2 *rcg)
- {
- int count, ret;
-@@ -164,12 +174,10 @@ calc_rate(unsigned long rate, u32 m, u32
- }
-
- static unsigned long
--clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
-+__clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, u32 cfg)
- {
- struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-- u32 cfg, hid_div, m = 0, n = 0, mode = 0, mask;
--
-- regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg);
-+ u32 hid_div, m = 0, n = 0, mode = 0, mask;
-
- if (rcg->mnd_width) {
- mask = BIT(rcg->mnd_width) - 1;
-@@ -190,6 +198,17 @@ clk_rcg2_recalc_rate(struct clk_hw *hw,
- return calc_rate(parent_rate, m, n, mode, hid_div);
- }
-
-+static unsigned long
-+clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
-+{
-+ struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-+ u32 cfg;
-+
-+ regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg);
-+
-+ return __clk_rcg2_recalc_rate(hw, parent_rate, cfg);
-+}
-+
- static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f,
- struct clk_rate_request *req,
- enum freq_policy policy)
-@@ -263,7 +282,8 @@ static int clk_rcg2_determine_floor_rate
- return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req, FLOOR);
- }
-
--static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
-+static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
-+ u32 *_cfg)
- {
- u32 cfg, mask, d_val, not2d_val, n_minus_m;
- struct clk_hw *hw = &rcg->clkr.hw;
-@@ -305,15 +325,27 @@ static int __clk_rcg2_configure(struct c
- cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
- if (rcg->mnd_width && f->n && (f->m != f->n))
- cfg |= CFG_MODE_DUAL_EDGE;
-- return regmap_update_bits(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg),
-- mask, cfg);
-+
-+ *_cfg &= ~mask;
-+ *_cfg |= cfg;
-+
-+ return 0;
- }
-
- static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
- {
-+ u32 cfg;
- int ret;
-
-- ret = __clk_rcg2_configure(rcg, f);
-+ ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg);
-+ if (ret)
-+ return ret;
-+
-+ ret = __clk_rcg2_configure(rcg, f, &cfg);
-+ if (ret)
-+ return ret;
-+
-+ ret = regmap_write(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), cfg);
- if (ret)
- return ret;
-
-@@ -994,11 +1026,12 @@ static int clk_rcg2_shared_set_rate(stru
- return -EINVAL;
-
- /*
-- * In case clock is disabled, update the CFG, M, N and D registers
-- * and don't hit the update bit of CMD register.
-+ * In case clock is disabled, update the M, N and D registers, cache
-+ * the CFG value in parked_cfg and don't hit the update bit of CMD
-+ * register.
- */
-- if (!__clk_is_enabled(hw->clk))
-- return __clk_rcg2_configure(rcg, f);
-+ if (!clk_hw_is_enabled(hw))
-+ return __clk_rcg2_configure(rcg, f, &rcg->parked_cfg);
-
- return clk_rcg2_shared_force_enable_clear(hw, f);
- }
-@@ -1022,6 +1055,11 @@ static int clk_rcg2_shared_enable(struct
- if (ret)
- return ret;
-
-+ /* Write back the stored configuration corresponding to current rate */
-+ ret = regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, rcg->parked_cfg);
-+ if (ret)
-+ return ret;
-+
- ret = update_config(rcg);
- if (ret)
- return ret;
-@@ -1032,13 +1070,12 @@ static int clk_rcg2_shared_enable(struct
- static void clk_rcg2_shared_disable(struct clk_hw *hw)
- {
- struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-- u32 cfg;
-
- /*
- * Store current configuration as switching to safe source would clear
- * the SRC and DIV of CFG register
- */
-- regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
-+ regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &rcg->parked_cfg);
-
- /*
- * Park the RCG at a safe configuration - sourced off of safe source.
-@@ -1056,17 +1093,52 @@ static void clk_rcg2_shared_disable(stru
- update_config(rcg);
-
- clk_rcg2_clear_force_enable(hw);
-+}
-
-- /* Write back the stored configuration corresponding to current rate */
-- regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg);
-+static u8 clk_rcg2_shared_get_parent(struct clk_hw *hw)
-+{
-+ struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-+
-+ /* If the shared rcg is parked use the cached cfg instead */
-+ if (!clk_hw_is_enabled(hw))
-+ return __clk_rcg2_get_parent(hw, rcg->parked_cfg);
-+
-+ return clk_rcg2_get_parent(hw);
-+}
-+
-+static int clk_rcg2_shared_set_parent(struct clk_hw *hw, u8 index)
-+{
-+ struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-+
-+ /* If the shared rcg is parked only update the cached cfg */
-+ if (!clk_hw_is_enabled(hw)) {
-+ rcg->parked_cfg &= ~CFG_SRC_SEL_MASK;
-+ rcg->parked_cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
-+
-+ return 0;
-+ }
-+
-+ return clk_rcg2_set_parent(hw, index);
-+}
-+
-+static unsigned long
-+clk_rcg2_shared_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
-+{
-+ struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-+
-+ /* If the shared rcg is parked use the cached cfg instead */
-+ if (!clk_hw_is_enabled(hw))
-+ return __clk_rcg2_recalc_rate(hw, parent_rate, rcg->parked_cfg);
-+
-+ return clk_rcg2_recalc_rate(hw, parent_rate);
- }
-
- const struct clk_ops clk_rcg2_shared_ops = {
- .enable = clk_rcg2_shared_enable,
- .disable = clk_rcg2_shared_disable,
-- .get_parent = clk_rcg2_get_parent,
-- .set_parent = clk_rcg2_set_parent,
-- .recalc_rate = clk_rcg2_recalc_rate,
-+ .get_parent = clk_rcg2_shared_get_parent,
-+ .set_parent = clk_rcg2_shared_set_parent,
-+ .recalc_rate = clk_rcg2_shared_recalc_rate,
- .determine_rate = clk_rcg2_determine_rate,
- .set_rate = clk_rcg2_shared_set_rate,
- .set_rate_and_parent = clk_rcg2_shared_set_rate_and_parent,
diff --git a/target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch b/target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch
deleted file mode 100644
index 3319f431ba..0000000000
--- a/target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch
+++ /dev/null
@@ -1,207 +0,0 @@
-From 77faa07c185c969e742cbb3e6aa487a11b0b616c Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 30 Aug 2022 09:57:42 +0300
-Subject: [PATCH] dt-bindings: arm: qcom: document qcom,msm-id and
- qcom,board-id
-
-The top level qcom,msm-id and qcom,board-id properties are utilized by
-bootloaders on Qualcomm MSM platforms to determine which device tree
-should be used and passed to the kernel.
-
-The commit b32e592d3c28 ("devicetree: bindings: Document qcom board
-compatible format") from 2015 was a consensus during discussion about
-upstreaming qcom,msm-id and qcom,board-id fields. There are however still
-problems with that consensus:
-1. It was reached 7 years ago but it turned out its implementation did
- not reach all possible products.
-
-2. Initially additional tool (dtbTool) was needed for parsing these
- fields to create a QCDT image consisting of multiple DTBs, later the
- bootloaders were improved and they use these qcom,msm-id and
- qcom,board-id properties directly.
-
-3. Extracting relevant information from the board compatible requires
- this additional tool (dtbTool), which makes the build process more
- complicated and not easily reproducible (DTBs are modified after the
- kernel build).
-
-4. Some versions of Qualcomm bootloaders expect these properties even
- when booting with a single DTB. The community is stuck with these
- bootloaders thus they require properties in the DTBs.
-
-Since several upstreamed Qualcomm SoC-based boards require these
-properties to properly boot and the properties are reportedly used by
-bootloaders, document them along with the bindings header with constants
-used by: bootloader, some DTS and socinfo driver.
-
-Link: https://lore.kernel.org/r/a3c932d1-a102-ce18-deea-18cbbd05ecab@linaro.org/
-Co-developed-by: Kumar Gala <galak@codeaurora.org>
-Signed-off-by: Kumar Gala <galak@codeaurora.org>
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220830065744.161163-2-krzysztof.kozlowski@linaro.org
----
- include/dt-bindings/arm/qcom,ids.h | 155 +++++++++++++++++++++++++++++
- 1 file changed, 155 insertions(+)
- create mode 100644 include/dt-bindings/arm/qcom,ids.h
-
---- /dev/null
-+++ b/include/dt-bindings/arm/qcom,ids.h
-@@ -0,0 +1,155 @@
-+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ * Copyright (c) 2022 Linaro Ltd
-+ * Author: Krzysztof Kozlowski <krzk@kernel.org> based on previous work of Kumar Gala.
-+ */
-+#ifndef _DT_BINDINGS_ARM_QCOM_IDS_H
-+#define _DT_BINDINGS_ARM_QCOM_IDS_H
-+
-+/*
-+ * The MSM chipset and hardware revision used by Qualcomm bootloaders, DTS for
-+ * older chipsets (qcom,msm-id) and in socinfo driver:
-+ */
-+#define QCOM_ID_MSM8960 87
-+#define QCOM_ID_APQ8064 109
-+#define QCOM_ID_MSM8660A 122
-+#define QCOM_ID_MSM8260A 123
-+#define QCOM_ID_APQ8060A 124
-+#define QCOM_ID_MSM8974 126
-+#define QCOM_ID_MPQ8064 130
-+#define QCOM_ID_MSM8960AB 138
-+#define QCOM_ID_APQ8060AB 139
-+#define QCOM_ID_MSM8260AB 140
-+#define QCOM_ID_MSM8660AB 141
-+#define QCOM_ID_MSM8626 145
-+#define QCOM_ID_MSM8610 147
-+#define QCOM_ID_APQ8064AB 153
-+#define QCOM_ID_MSM8226 158
-+#define QCOM_ID_MSM8526 159
-+#define QCOM_ID_MSM8110 161
-+#define QCOM_ID_MSM8210 162
-+#define QCOM_ID_MSM8810 163
-+#define QCOM_ID_MSM8212 164
-+#define QCOM_ID_MSM8612 165
-+#define QCOM_ID_MSM8112 166
-+#define QCOM_ID_MSM8225Q 168
-+#define QCOM_ID_MSM8625Q 169
-+#define QCOM_ID_MSM8125Q 170
-+#define QCOM_ID_APQ8064AA 172
-+#define QCOM_ID_APQ8084 178
-+#define QCOM_ID_APQ8074 184
-+#define QCOM_ID_MSM8274 185
-+#define QCOM_ID_MSM8674 186
-+#define QCOM_ID_MSM8974PRO_AC 194
-+#define QCOM_ID_MSM8126 198
-+#define QCOM_ID_APQ8026 199
-+#define QCOM_ID_MSM8926 200
-+#define QCOM_ID_MSM8326 205
-+#define QCOM_ID_MSM8916 206
-+#define QCOM_ID_MSM8994 207
-+#define QCOM_ID_APQ8074PRO_AA 208
-+#define QCOM_ID_APQ8074PRO_AB 209
-+#define QCOM_ID_APQ8074PRO_AC 210
-+#define QCOM_ID_MSM8274PRO_AA 211
-+#define QCOM_ID_MSM8274PRO_AB 212
-+#define QCOM_ID_MSM8274PRO_AC 213
-+#define QCOM_ID_MSM8674PRO_AA 214
-+#define QCOM_ID_MSM8674PRO_AB 215
-+#define QCOM_ID_MSM8674PRO_AC 216
-+#define QCOM_ID_MSM8974PRO_AA 217
-+#define QCOM_ID_MSM8974PRO_AB 218
-+#define QCOM_ID_APQ8028 219
-+#define QCOM_ID_MSM8128 220
-+#define QCOM_ID_MSM8228 221
-+#define QCOM_ID_MSM8528 222
-+#define QCOM_ID_MSM8628 223
-+#define QCOM_ID_MSM8928 224
-+#define QCOM_ID_MSM8510 225
-+#define QCOM_ID_MSM8512 226
-+#define QCOM_ID_MSM8936 233
-+#define QCOM_ID_MSM8939 239
-+#define QCOM_ID_APQ8036 240
-+#define QCOM_ID_APQ8039 241
-+#define QCOM_ID_MSM8996 246
-+#define QCOM_ID_APQ8016 247
-+#define QCOM_ID_MSM8216 248
-+#define QCOM_ID_MSM8116 249
-+#define QCOM_ID_MSM8616 250
-+#define QCOM_ID_MSM8992 251
-+#define QCOM_ID_APQ8094 253
-+#define QCOM_ID_MDM9607 290
-+#define QCOM_ID_APQ8096 291
-+#define QCOM_ID_MSM8998 292
-+#define QCOM_ID_MSM8953 293
-+#define QCOM_ID_MDM8207 296
-+#define QCOM_ID_MDM9207 297
-+#define QCOM_ID_MDM9307 298
-+#define QCOM_ID_MDM9628 299
-+#define QCOM_ID_APQ8053 304
-+#define QCOM_ID_MSM8996SG 305
-+#define QCOM_ID_MSM8996AU 310
-+#define QCOM_ID_APQ8096AU 311
-+#define QCOM_ID_APQ8096SG 312
-+#define QCOM_ID_SDM660 317
-+#define QCOM_ID_SDM630 318
-+#define QCOM_ID_APQ8098 319
-+#define QCOM_ID_SDM845 321
-+#define QCOM_ID_MDM9206 322
-+#define QCOM_ID_IPQ8074 323
-+#define QCOM_ID_SDA660 324
-+#define QCOM_ID_SDM658 325
-+#define QCOM_ID_SDA658 326
-+#define QCOM_ID_SDA630 327
-+#define QCOM_ID_SDM450 338
-+#define QCOM_ID_SDA845 341
-+#define QCOM_ID_IPQ8072 342
-+#define QCOM_ID_IPQ8076 343
-+#define QCOM_ID_IPQ8078 344
-+#define QCOM_ID_SDM636 345
-+#define QCOM_ID_SDA636 346
-+#define QCOM_ID_SDM632 349
-+#define QCOM_ID_SDA632 350
-+#define QCOM_ID_SDA450 351
-+#define QCOM_ID_SM8250 356
-+#define QCOM_ID_IPQ8070 375
-+#define QCOM_ID_IPQ8071 376
-+#define QCOM_ID_IPQ8072A 389
-+#define QCOM_ID_IPQ8074A 390
-+#define QCOM_ID_IPQ8076A 391
-+#define QCOM_ID_IPQ8078A 392
-+#define QCOM_ID_SM6125 394
-+#define QCOM_ID_IPQ8070A 395
-+#define QCOM_ID_IPQ8071A 396
-+#define QCOM_ID_IPQ6018 402
-+#define QCOM_ID_IPQ6028 403
-+#define QCOM_ID_IPQ6000 421
-+#define QCOM_ID_IPQ6010 422
-+#define QCOM_ID_SC7180 425
-+#define QCOM_ID_SM6350 434
-+#define QCOM_ID_SM8350 439
-+#define QCOM_ID_SC8280XP 449
-+#define QCOM_ID_IPQ6005 453
-+#define QCOM_ID_QRB5165 455
-+#define QCOM_ID_SM8450 457
-+#define QCOM_ID_SM7225 459
-+#define QCOM_ID_SA8295P 460
-+#define QCOM_ID_SA8540P 461
-+#define QCOM_ID_SM8450_2 480
-+#define QCOM_ID_SM8450_3 482
-+#define QCOM_ID_SC7280 487
-+#define QCOM_ID_SC7180P 495
-+#define QCOM_ID_SM6375 507
-+
-+/*
-+ * The board type and revision information, used by Qualcomm bootloaders and
-+ * DTS for older chipsets (qcom,board-id):
-+ */
-+#define QCOM_BOARD_ID(a, major, minor) \
-+ (((major & 0xff) << 16) | ((minor & 0xff) << 8) | QCOM_BOARD_ID_##a)
-+
-+#define QCOM_BOARD_ID_MTP 8
-+#define QCOM_BOARD_ID_DRAGONBOARD 10
-+#define QCOM_BOARD_ID_SBC 24
-+
-+#endif /* _DT_BINDINGS_ARM_QCOM_IDS_H */
diff --git a/target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch b/target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch
deleted file mode 100644
index 5713775948..0000000000
--- a/target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch
+++ /dev/null
@@ -1,203 +0,0 @@
-From 032be4f49dda786fea9e1501212f6cd09a7ded96 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 3 Nov 2022 14:49:43 +0100
-Subject: [PATCH] clk: qcom: clk-rcg2: introduce support for multiple conf for
- same freq
-
-Some RCG frequency can be reached by multiple configuration.
-
-We currently declare multiple configuration for the same frequency but
-that is not supported and always the first configuration will be taken.
-
-These multiple configuration are needed as based on the current parent
-configuration, it may be needed to use a different configuration to
-reach the same frequency.
-
-To handle this introduce 2 new macro, FM and C.
-
-- FM is used to declare an empty freq_tbl with just the frequency and an
- array of confs to insert all the config for the provided frequency.
-
-- C is used to declare a fre_conf where src, pre_div, m and n are
- provided.
-
-The driver is changed to handle this special freq_tbl and select the
-correct config by calculating the final rate and deciding based on the
-one that is less different than the requested one.
-
-Tested-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/clk/qcom/clk-rcg.h | 14 ++++++-
- drivers/clk/qcom/clk-rcg2.c | 84 +++++++++++++++++++++++++++++++++----
- 2 files changed, 88 insertions(+), 10 deletions(-)
-
---- a/drivers/clk/qcom/clk-rcg.h
-+++ b/drivers/clk/qcom/clk-rcg.h
-@@ -7,7 +7,17 @@
- #include <linux/clk-provider.h>
- #include "clk-regmap.h"
-
--#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
-+#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n), 0, NULL }
-+
-+#define FM(_f, _confs) { .freq = (_f), .confs_num = ARRAY_SIZE(_confs), .confs = (_confs) }
-+#define C(s, h, m, n) { (s), (2 * (h) - 1), (m), (n) }
-+
-+struct freq_conf {
-+ u8 src;
-+ u8 pre_div;
-+ u16 m;
-+ u16 n;
-+};
-
- struct freq_tbl {
- unsigned long freq;
-@@ -15,6 +25,8 @@ struct freq_tbl {
- u8 pre_div;
- u16 m;
- u16 n;
-+ int confs_num;
-+ const struct freq_conf *confs;
- };
-
- /**
---- a/drivers/clk/qcom/clk-rcg2.c
-+++ b/drivers/clk/qcom/clk-rcg2.c
-@@ -209,11 +209,60 @@ clk_rcg2_recalc_rate(struct clk_hw *hw,
- return __clk_rcg2_recalc_rate(hw, parent_rate, cfg);
- }
-
-+static void
-+clk_rcg2_select_conf(struct clk_hw *hw, struct freq_tbl *f_tbl,
-+ const struct freq_tbl *f, unsigned long req_rate)
-+{
-+ unsigned long best_rate = 0, parent_rate, rate;
-+ const struct freq_conf *conf, *best_conf;
-+ struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-+ struct clk_hw *p;
-+ int index, i;
-+
-+ /* Search in each provided config the one that is near the wanted rate */
-+ for (i = 0, conf = f->confs; i < f->confs_num; i++, conf++) {
-+ index = qcom_find_src_index(hw, rcg->parent_map, conf->src);
-+ if (index < 0)
-+ continue;
-+
-+ p = clk_hw_get_parent_by_index(hw, index);
-+ if (!p)
-+ continue;
-+
-+ parent_rate = clk_hw_get_rate(p);
-+ rate = calc_rate(parent_rate, conf->n, conf->m, conf->n, conf->pre_div);
-+
-+ if (rate == req_rate) {
-+ best_conf = conf;
-+ break;
-+ }
-+
-+ if (abs(req_rate - rate) < abs(best_rate - rate)) {
-+ best_rate = rate;
-+ best_conf = conf;
-+ }
-+ }
-+
-+ /*
-+ * Very unlikely.
-+ * Force the first conf if we can't find a correct config.
-+ */
-+ if (unlikely(i == f->confs_num))
-+ best_conf = f->confs;
-+
-+ /* Apply the config */
-+ f_tbl->src = best_conf->src;
-+ f_tbl->pre_div = best_conf->pre_div;
-+ f_tbl->m = best_conf->m;
-+ f_tbl->n = best_conf->n;
-+}
-+
- static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f,
- struct clk_rate_request *req,
- enum freq_policy policy)
- {
- unsigned long clk_flags, rate = req->rate;
-+ struct freq_tbl f_tbl;
- struct clk_hw *p;
- struct clk_rcg2 *rcg = to_clk_rcg2(hw);
- int index;
-@@ -232,7 +281,15 @@ static int _freq_tbl_determine_rate(stru
- if (!f)
- return -EINVAL;
-
-- index = qcom_find_src_index(hw, rcg->parent_map, f->src);
-+ f_tbl = *f;
-+ /*
-+ * A single freq may be reached by multiple configuration.
-+ * Try to find the bast one if we have this kind of freq_table.
-+ */
-+ if (f->confs)
-+ clk_rcg2_select_conf(hw, &f_tbl, f, rate);
-+
-+ index = qcom_find_src_index(hw, rcg->parent_map, f_tbl.src);
- if (index < 0)
- return index;
-
-@@ -242,18 +299,18 @@ static int _freq_tbl_determine_rate(stru
- return -EINVAL;
-
- if (clk_flags & CLK_SET_RATE_PARENT) {
-- rate = f->freq;
-- if (f->pre_div) {
-+ rate = f_tbl.freq;
-+ if (f_tbl.pre_div) {
- if (!rate)
- rate = req->rate;
- rate /= 2;
-- rate *= f->pre_div + 1;
-+ rate *= f_tbl.pre_div + 1;
- }
-
-- if (f->n) {
-+ if (f_tbl.n) {
- u64 tmp = rate;
-- tmp = tmp * f->n;
-- do_div(tmp, f->m);
-+ tmp = tmp * f_tbl.n;
-+ do_div(tmp, f_tbl.m);
- rate = tmp;
- }
- } else {
-@@ -261,7 +318,7 @@ static int _freq_tbl_determine_rate(stru
- }
- req->best_parent_hw = p;
- req->best_parent_rate = rate;
-- req->rate = f->freq;
-+ req->rate = f_tbl.freq;
-
- return 0;
- }
-@@ -357,6 +414,7 @@ static int __clk_rcg2_set_rate(struct cl
- {
- struct clk_rcg2 *rcg = to_clk_rcg2(hw);
- const struct freq_tbl *f;
-+ struct freq_tbl f_tbl;
-
- switch (policy) {
- case FLOOR:
-@@ -372,7 +430,15 @@ static int __clk_rcg2_set_rate(struct cl
- if (!f)
- return -EINVAL;
-
-- return clk_rcg2_configure(rcg, f);
-+ f_tbl = *f;
-+ /*
-+ * A single freq may be reached by multiple configuration.
-+ * Try to find the best one if we have this kind of freq_table.
-+ */
-+ if (f->confs)
-+ clk_rcg2_select_conf(hw, &f_tbl, f, rate);
-+
-+ return clk_rcg2_configure(rcg, &f_tbl);
- }
-
- static int clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate,
diff --git a/target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch b/target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch
deleted file mode 100644
index 32fb2d9d87..0000000000
--- a/target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From f778553f296792f4d1e8b3552603ad6116ea3eb3 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 3 Nov 2022 14:49:44 +0100
-Subject: [PATCH] clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple
- conf
-
-Rework nss_port5/6 to use the new multiple configuration implementation
-and correctly fix the clocks for these port under some corner case.
-
-This is particularly relevant for device that have 2.5G or 10G port
-connected to port5 or port 6 on ipq8074. As the parent are shared
-across multiple port it may be required to select the correct
-configuration to accomplish the desired clock. Without this patch such
-port doesn't work in some specific ethernet speed as the clock will be
-set to the wrong frequency as we just select the first configuration for
-the related frequency instead of selecting the best one.
-
-Tested-by: Robert Marko <robimarko@gmail.com> # ipq8074 Qnap QHora-301W
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/clk/qcom/gcc-ipq8074.c | 64 +++++++++++++++++++++++++---------
- 1 file changed, 48 insertions(+), 16 deletions(-)
-
---- a/drivers/clk/qcom/gcc-ipq8074.c
-+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -1682,13 +1682,21 @@ static struct clk_regmap_div nss_port4_t
- },
- };
-
-+static const struct freq_conf ftbl_nss_port5_rx_clk_src_25[] = {
-+ C(P_UNIPHY1_RX, 12.5, 0, 0),
-+ C(P_UNIPHY0_RX, 5, 0, 0),
-+};
-+
-+static const struct freq_conf ftbl_nss_port5_rx_clk_src_125[] = {
-+ C(P_UNIPHY1_RX, 2.5, 0, 0),
-+ C(P_UNIPHY0_RX, 1, 0, 0),
-+};
-+
- static const struct freq_tbl ftbl_nss_port5_rx_clk_src[] = {
- F(19200000, P_XO, 1, 0, 0),
-- F(25000000, P_UNIPHY1_RX, 12.5, 0, 0),
-- F(25000000, P_UNIPHY0_RX, 5, 0, 0),
-+ FM(25000000, ftbl_nss_port5_rx_clk_src_25),
- F(78125000, P_UNIPHY1_RX, 4, 0, 0),
-- F(125000000, P_UNIPHY1_RX, 2.5, 0, 0),
-- F(125000000, P_UNIPHY0_RX, 1, 0, 0),
-+ FM(125000000, ftbl_nss_port5_rx_clk_src_125),
- F(156250000, P_UNIPHY1_RX, 2, 0, 0),
- F(312500000, P_UNIPHY1_RX, 1, 0, 0),
- { }
-@@ -1744,13 +1752,21 @@ static struct clk_regmap_div nss_port5_r
- },
- };
-
-+static struct freq_conf ftbl_nss_port5_tx_clk_src_25[] = {
-+ C(P_UNIPHY1_TX, 12.5, 0, 0),
-+ C(P_UNIPHY0_TX, 5, 0, 0),
-+};
-+
-+static struct freq_conf ftbl_nss_port5_tx_clk_src_125[] = {
-+ C(P_UNIPHY1_TX, 2.5, 0, 0),
-+ C(P_UNIPHY0_TX, 1, 0, 0),
-+};
-+
- static const struct freq_tbl ftbl_nss_port5_tx_clk_src[] = {
- F(19200000, P_XO, 1, 0, 0),
-- F(25000000, P_UNIPHY1_TX, 12.5, 0, 0),
-- F(25000000, P_UNIPHY0_TX, 5, 0, 0),
-+ FM(25000000, ftbl_nss_port5_tx_clk_src_25),
- F(78125000, P_UNIPHY1_TX, 4, 0, 0),
-- F(125000000, P_UNIPHY1_TX, 2.5, 0, 0),
-- F(125000000, P_UNIPHY0_TX, 1, 0, 0),
-+ FM(125000000, ftbl_nss_port5_tx_clk_src_125),
- F(156250000, P_UNIPHY1_TX, 2, 0, 0),
- F(312500000, P_UNIPHY1_TX, 1, 0, 0),
- { }
-@@ -1806,13 +1822,21 @@ static struct clk_regmap_div nss_port5_t
- },
- };
-
-+static struct freq_conf ftbl_nss_port6_rx_clk_src_25[] = {
-+ C(P_UNIPHY2_RX, 5, 0, 0),
-+ C(P_UNIPHY2_RX, 12.5, 0, 0),
-+};
-+
-+static struct freq_conf ftbl_nss_port6_rx_clk_src_125[] = {
-+ C(P_UNIPHY2_RX, 1, 0, 0),
-+ C(P_UNIPHY2_RX, 2.5, 0, 0),
-+};
-+
- static const struct freq_tbl ftbl_nss_port6_rx_clk_src[] = {
- F(19200000, P_XO, 1, 0, 0),
-- F(25000000, P_UNIPHY2_RX, 5, 0, 0),
-- F(25000000, P_UNIPHY2_RX, 12.5, 0, 0),
-+ FM(25000000, ftbl_nss_port6_rx_clk_src_25),
- F(78125000, P_UNIPHY2_RX, 4, 0, 0),
-- F(125000000, P_UNIPHY2_RX, 1, 0, 0),
-- F(125000000, P_UNIPHY2_RX, 2.5, 0, 0),
-+ FM(125000000, ftbl_nss_port6_rx_clk_src_125),
- F(156250000, P_UNIPHY2_RX, 2, 0, 0),
- F(312500000, P_UNIPHY2_RX, 1, 0, 0),
- { }
-@@ -1863,13 +1887,21 @@ static struct clk_regmap_div nss_port6_r
- },
- };
-
-+static struct freq_conf ftbl_nss_port6_tx_clk_src_25[] = {
-+ C(P_UNIPHY2_TX, 5, 0, 0),
-+ C(P_UNIPHY2_TX, 12.5, 0, 0),
-+};
-+
-+static struct freq_conf ftbl_nss_port6_tx_clk_src_125[] = {
-+ C(P_UNIPHY2_TX, 1, 0, 0),
-+ C(P_UNIPHY2_TX, 2.5, 0, 0),
-+};
-+
- static const struct freq_tbl ftbl_nss_port6_tx_clk_src[] = {
- F(19200000, P_XO, 1, 0, 0),
-- F(25000000, P_UNIPHY2_TX, 5, 0, 0),
-- F(25000000, P_UNIPHY2_TX, 12.5, 0, 0),
-+ FM(25000000, ftbl_nss_port6_tx_clk_src_25),
- F(78125000, P_UNIPHY2_TX, 4, 0, 0),
-- F(125000000, P_UNIPHY2_TX, 1, 0, 0),
-- F(125000000, P_UNIPHY2_TX, 2.5, 0, 0),
-+ FM(125000000, ftbl_nss_port6_tx_clk_src_125),
- F(156250000, P_UNIPHY2_TX, 2, 0, 0),
- F(312500000, P_UNIPHY2_TX, 1, 0, 0),
- { }
diff --git a/target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch b/target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch
deleted file mode 100644
index af53c077ff..0000000000
--- a/target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From ad2d07f71739351eeea1d8a120c0918e2c4b265f Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 22 Dec 2021 12:23:34 +0100
-Subject: [PATCH] arm64: dts: ipq8074: add reserved memory nodes
-
-IPQ8074 has multiple reserved memory ranges, if they are not defined
-then weird things tend to happen, board hangs and resets when PCI or
-WLAN is used etc.
-
-So, to avoid all of that add the reserved memory nodes from the downstream
-5.4 kernel from QCA.
-This is their default layout meant for devices with 1GB of RAM, but
-devices with lower ammounts can override the Q6 node.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 35 +++++++++++++++++++++++++++
- 1 file changed, 35 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -85,6 +85,26 @@
- #size-cells = <2>;
- ranges;
-
-+ nss@40000000 {
-+ no-map;
-+ reg = <0x0 0x40000000 0x0 0x01000000>;
-+ };
-+
-+ tzapp_region: tzapp@4a400000 {
-+ no-map;
-+ reg = <0x0 0x4a400000 0x0 0x00200000>;
-+ };
-+
-+ uboot@4a600000 {
-+ no-map;
-+ reg = <0x0 0x4a600000 0x0 0x00400000>;
-+ };
-+
-+ sbl@4aa00000 {
-+ no-map;
-+ reg = <0x0 0x4aa00000 0x0 0x00100000>;
-+ };
-+
- smem@4ab00000 {
- compatible = "qcom,smem";
- reg = <0x0 0x4ab00000 0x0 0x00100000>;
-@@ -97,6 +117,21 @@
- no-map;
- reg = <0x0 0x4ac00000 0x0 0x00400000>;
- };
-+
-+ q6_region: wcnss@4b000000 {
-+ no-map;
-+ reg = <0x0 0x4b000000 0x0 0x05f00000>;
-+ };
-+
-+ q6_etr_region: q6_etr_dump@50f00000 {
-+ no-map;
-+ reg = <0x0 0x50f00000 0x0 0x00100000>;
-+ };
-+
-+ m3_dump_region: m3_dump@51000000 {
-+ no-map;
-+ reg = <0x0 0x51000000 0x0 0x100000>;
-+ };
- };
-
- firmware {
diff --git a/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch b/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch
deleted file mode 100644
index 0fa38394b9..0000000000
--- a/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From a4748d2850783d36f77ccf2b5fcc86ccf1800ef1 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 16 Nov 2022 22:48:36 +0100
-Subject: [PATCH] arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed
-
-Add the generic 'max-link-speed' property to describe the Gen2 PCIe link
-generation limit.
-This allows the generic DWC code to configure the link speed correctly.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -801,6 +801,7 @@
- linux,pci-domain = <1>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
-+ max-link-speed = <2>;
- #address-cells = <3>;
- #size-cells = <2>;
-
diff --git a/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch b/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch
deleted file mode 100644
index c7a7e7ab49..0000000000
--- a/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 76893579a74e7e5c79f0c717d95d13f4cbbb5f4d Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sat, 24 Dec 2022 17:11:16 +0100
-Subject: [PATCH] PCI: qcom: Add support for IPQ8074 Gen3 port
-
-IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported.
-Add compatible for Gen3 port which uses the same controller as IPQ6018.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/pci/controller/dwc/pcie-qcom.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -1733,6 +1733,7 @@ static const struct of_device_id qcom_pc
- { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg },
- { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg },
- { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg },
-+ { .compatible = "qcom,pcie-ipq8074-gen3", .data = &ipq6018_cfg },
- { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg },
- { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg },
- { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
diff --git a/target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch b/target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch
deleted file mode 100644
index 69d4126f76..0000000000
--- a/target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 8a576b5bc9f0555d1d970cacabcaa24a3b74fa57 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 16 Nov 2022 22:15:01 +0100
-Subject: [PATCH] arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to
- GCC
-
-Pass QMP PCI PHY PIPE clocks to the GCC controller so it does not have to
-find them by matching globaly by name.
-
-If not passed directly, driver maintains backwards compatibility by then
-falling back to global lookup.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -396,8 +396,8 @@
- gcc: gcc@1800000 {
- compatible = "qcom,gcc-ipq8074";
- reg = <0x01800000 0x80000>;
-- clocks = <&xo>, <&sleep_clk>;
-- clock-names = "xo", "sleep_clk";
-+ clocks = <&xo>, <&sleep_clk>, <&pcie_phy0>, <&pcie_phy1>;
-+ clock-names = "xo", "sleep_clk", "pcie0_pipe", "pcie1_pipe";
- #clock-cells = <1>;
- #power-domain-cells = <1>;
- #reset-cells = <1>;
diff --git a/target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch b/target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch
deleted file mode 100644
index 9fefd8852a..0000000000
--- a/target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From fb1f6850be00d8dd8a54017be4c1336e224069ac Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 16 Nov 2022 22:26:25 +0100
-Subject: [PATCH] arm64: dts: qcom: ipq8074: use msi-parent for PCIe
-
-Instead of hardcoding the IRQ, simply use msi-parent instead.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -699,7 +699,7 @@
- reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
- ranges = <0 0xb00a000 0xffd>;
-
-- v2m@0 {
-+ gic_v2m0: v2m@0 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x0 0xffd>;
-@@ -811,8 +811,7 @@
- ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */
- <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
-
-- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "msi";
-+ msi-parent = <&gic_v2m0>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142
-@@ -873,8 +872,7 @@
- ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */
- <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
-
-- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "msi";
-+ msi-parent = <&gic_v2m0>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75
diff --git a/target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch b/target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch
deleted file mode 100644
index 2124bfa3f1..0000000000
--- a/target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-From 125681433c8e526356947acf572fe8ca8ad32291 Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Date: Sat, 30 Jan 2021 10:50:05 +0530
-Subject: [PATCH] remoteproc: qcom: Add PRNG proxy clock
-
-PRNG clock is needed by the secure PIL, support for the same
-is added in subsequent patches.
-
-Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
-Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
----
- drivers/remoteproc/qcom_q6v5_wcss.c | 65 +++++++++++++++++++++--------
- 1 file changed, 47 insertions(+), 18 deletions(-)
-
---- a/drivers/remoteproc/qcom_q6v5_wcss.c
-+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
-@@ -91,19 +91,6 @@ enum {
- WCSS_QCS404,
- };
-
--struct wcss_data {
-- const char *firmware_name;
-- unsigned int crash_reason_smem;
-- u32 version;
-- bool aon_reset_required;
-- bool wcss_q6_reset_required;
-- const char *ssr_name;
-- const char *sysmon_name;
-- int ssctl_id;
-- const struct rproc_ops *ops;
-- bool requires_force_stop;
--};
--
- struct q6v5_wcss {
- struct device *dev;
-
-@@ -128,6 +115,7 @@ struct q6v5_wcss {
- struct clk *qdsp6ss_xo_cbcr;
- struct clk *qdsp6ss_core_gfmux;
- struct clk *lcc_bcr_sleep;
-+ struct clk *prng_clk;
- struct regulator *cx_supply;
- struct qcom_sysmon *sysmon;
-
-@@ -151,6 +139,21 @@ struct q6v5_wcss {
- struct qcom_rproc_ssr ssr_subdev;
- };
-
-+struct wcss_data {
-+ int (*init_clock)(struct q6v5_wcss *wcss);
-+ int (*init_regulator)(struct q6v5_wcss *wcss);
-+ const char *firmware_name;
-+ unsigned int crash_reason_smem;
-+ u32 version;
-+ bool aon_reset_required;
-+ bool wcss_q6_reset_required;
-+ const char *ssr_name;
-+ const char *sysmon_name;
-+ int ssctl_id;
-+ const struct rproc_ops *ops;
-+ bool requires_force_stop;
-+};
-+
- static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
- {
- int ret;
-@@ -240,6 +243,12 @@ static int q6v5_wcss_start(struct rproc
- struct q6v5_wcss *wcss = rproc->priv;
- int ret;
-
-+ ret = clk_prepare_enable(wcss->prng_clk);
-+ if (ret) {
-+ dev_err(wcss->dev, "prng clock enable failed\n");
-+ return ret;
-+ }
-+
- qcom_q6v5_prepare(&wcss->q6v5);
-
- /* Release Q6 and WCSS reset */
-@@ -733,6 +742,7 @@ static int q6v5_wcss_stop(struct rproc *
- return ret;
- }
-
-+ clk_disable_unprepare(wcss->prng_clk);
- qcom_q6v5_unprepare(&wcss->q6v5);
-
- return 0;
-@@ -900,7 +910,21 @@ static int q6v5_alloc_memory_region(stru
- return 0;
- }
-
--static int q6v5_wcss_init_clock(struct q6v5_wcss *wcss)
-+static int ipq8074_init_clock(struct q6v5_wcss *wcss)
-+{
-+ int ret;
-+
-+ wcss->prng_clk = devm_clk_get(wcss->dev, "prng");
-+ if (IS_ERR(wcss->prng_clk)) {
-+ ret = PTR_ERR(wcss->prng_clk);
-+ if (ret != -EPROBE_DEFER)
-+ dev_err(wcss->dev, "Failed to get prng clock\n");
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+static int qcs404_init_clock(struct q6v5_wcss *wcss)
- {
- int ret;
-
-@@ -990,7 +1014,7 @@ static int q6v5_wcss_init_clock(struct q
- return 0;
- }
-
--static int q6v5_wcss_init_regulator(struct q6v5_wcss *wcss)
-+static int qcs404_init_regulator(struct q6v5_wcss *wcss)
- {
- wcss->cx_supply = devm_regulator_get(wcss->dev, "cx");
- if (IS_ERR(wcss->cx_supply))
-@@ -1034,12 +1058,14 @@ static int q6v5_wcss_probe(struct platfo
- if (ret)
- goto free_rproc;
-
-- if (wcss->version == WCSS_QCS404) {
-- ret = q6v5_wcss_init_clock(wcss);
-+ if (desc->init_clock) {
-+ ret = desc->init_clock(wcss);
- if (ret)
- goto free_rproc;
-+ }
-
-- ret = q6v5_wcss_init_regulator(wcss);
-+ if (desc->init_regulator) {
-+ ret = desc->init_regulator(wcss);
- if (ret)
- goto free_rproc;
- }
-@@ -1086,6 +1112,7 @@ static int q6v5_wcss_remove(struct platf
- }
-
- static const struct wcss_data wcss_ipq8074_res_init = {
-+ .init_clock = ipq8074_init_clock,
- .firmware_name = "IPQ8074/q6_fw.mdt",
- .crash_reason_smem = WCSS_CRASH_REASON,
- .aon_reset_required = true,
-@@ -1095,6 +1122,8 @@ static const struct wcss_data wcss_ipq80
- };
-
- static const struct wcss_data wcss_qcs404_res_init = {
-+ .init_clock = qcs404_init_clock,
-+ .init_regulator = qcs404_init_regulator,
- .crash_reason_smem = WCSS_CRASH_REASON,
- .firmware_name = "wcnss.mdt",
- .version = WCSS_QCS404,
diff --git a/target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch b/target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch
deleted file mode 100644
index 1d415942e0..0000000000
--- a/target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From 7358d42dfbdfdb5d4f1d0d4c2e5c2bb4143a29b0 Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Date: Sat, 30 Jan 2021 10:50:06 +0530
-Subject: [PATCH] remoteproc: qcom: Add secure PIL support
-
-IPQ8074 uses secure PIL. Hence, adding the support for the same.
-
-Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
-Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
----
- drivers/remoteproc/qcom_q6v5_wcss.c | 43 +++++++++++++++++++++++++++--
- 1 file changed, 40 insertions(+), 3 deletions(-)
-
---- a/drivers/remoteproc/qcom_q6v5_wcss.c
-+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
-@@ -18,6 +18,7 @@
- #include <linux/regulator/consumer.h>
- #include <linux/reset.h>
- #include <linux/soc/qcom/mdt_loader.h>
-+#include <linux/qcom_scm.h>
- #include "qcom_common.h"
- #include "qcom_pil_info.h"
- #include "qcom_q6v5.h"
-@@ -86,6 +87,9 @@
- #define TCSR_WCSS_CLK_ENABLE 0x14
-
- #define MAX_HALT_REG 3
-+
-+#define WCNSS_PAS_ID 6
-+
- enum {
- WCSS_IPQ8074,
- WCSS_QCS404,
-@@ -134,6 +138,7 @@ struct q6v5_wcss {
- unsigned int crash_reason_smem;
- u32 version;
- bool requires_force_stop;
-+ bool need_mem_protection;
-
- struct qcom_rproc_glink glink_subdev;
- struct qcom_rproc_ssr ssr_subdev;
-@@ -152,6 +157,7 @@ struct wcss_data {
- int ssctl_id;
- const struct rproc_ops *ops;
- bool requires_force_stop;
-+ bool need_mem_protection;
- };
-
- static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
-@@ -251,6 +257,15 @@ static int q6v5_wcss_start(struct rproc
-
- qcom_q6v5_prepare(&wcss->q6v5);
-
-+ if (wcss->need_mem_protection) {
-+ ret = qcom_scm_pas_auth_and_reset(WCNSS_PAS_ID);
-+ if (ret) {
-+ dev_err(wcss->dev, "wcss_reset failed\n");
-+ return ret;
-+ }
-+ goto wait_for_reset;
-+ }
-+
- /* Release Q6 and WCSS reset */
- ret = reset_control_deassert(wcss->wcss_reset);
- if (ret) {
-@@ -285,6 +300,7 @@ static int q6v5_wcss_start(struct rproc
- if (ret)
- goto wcss_q6_reset;
-
-+wait_for_reset:
- ret = qcom_q6v5_wait_for_start(&wcss->q6v5, 5 * HZ);
- if (ret == -ETIMEDOUT)
- dev_err(wcss->dev, "start timed out\n");
-@@ -718,6 +734,15 @@ static int q6v5_wcss_stop(struct rproc *
- struct q6v5_wcss *wcss = rproc->priv;
- int ret;
-
-+ if (wcss->need_mem_protection) {
-+ ret = qcom_scm_pas_shutdown(WCNSS_PAS_ID);
-+ if (ret) {
-+ dev_err(wcss->dev, "not able to shutdown\n");
-+ return ret;
-+ }
-+ goto pas_done;
-+ }
-+
- /* WCSS powerdown */
- if (wcss->requires_force_stop) {
- ret = qcom_q6v5_request_stop(&wcss->q6v5, NULL);
-@@ -742,6 +767,7 @@ static int q6v5_wcss_stop(struct rproc *
- return ret;
- }
-
-+pas_done:
- clk_disable_unprepare(wcss->prng_clk);
- qcom_q6v5_unprepare(&wcss->q6v5);
-
-@@ -765,9 +791,15 @@ static int q6v5_wcss_load(struct rproc *
- struct q6v5_wcss *wcss = rproc->priv;
- int ret;
-
-- ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
-- 0, wcss->mem_region, wcss->mem_phys,
-- wcss->mem_size, &wcss->mem_reloc);
-+ if (wcss->need_mem_protection)
-+ ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware,
-+ WCNSS_PAS_ID, wcss->mem_region,
-+ wcss->mem_phys, wcss->mem_size,
-+ &wcss->mem_reloc);
-+ else
-+ ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
-+ 0, wcss->mem_region, wcss->mem_phys,
-+ wcss->mem_size, &wcss->mem_reloc);
- if (ret)
- return ret;
-
-@@ -1036,6 +1068,9 @@ static int q6v5_wcss_probe(struct platfo
- if (!desc)
- return -EINVAL;
-
-+ if (desc->need_mem_protection && !qcom_scm_is_available())
-+ return -EPROBE_DEFER;
-+
- rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops,
- desc->firmware_name, sizeof(*wcss));
- if (!rproc) {
-@@ -1049,6 +1084,7 @@ static int q6v5_wcss_probe(struct platfo
-
- wcss->version = desc->version;
- wcss->requires_force_stop = desc->requires_force_stop;
-+ wcss->need_mem_protection = desc->need_mem_protection;
-
- ret = q6v5_wcss_init_mmio(wcss, pdev);
- if (ret)
-@@ -1119,6 +1155,7 @@ static const struct wcss_data wcss_ipq80
- .wcss_q6_reset_required = true,
- .ops = &q6v5_wcss_ipq8074_ops,
- .requires_force_stop = true,
-+ .need_mem_protection = true,
- };
-
- static const struct wcss_data wcss_qcs404_res_init = {
diff --git a/target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch b/target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch
deleted file mode 100644
index 1231824af0..0000000000
--- a/target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From b422c9d4f048b086ce83f44a7cfcddcce162897f Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Date: Sat, 30 Jan 2021 10:50:07 +0530
-Subject: [PATCH] remoteproc: qcom: Add support for split q6 + m3 wlan firmware
-
-IPQ8074 supports split firmware for q6 and m3 as well.
-So add support for loading the m3 firmware before q6.
-Now the drivers works fine for both split and unified
-firmwares.
-
-Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
-Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
----
- drivers/remoteproc/qcom_q6v5_wcss.c | 33 +++++++++++++++++++++++++----
- 1 file changed, 29 insertions(+), 4 deletions(-)
-
---- a/drivers/remoteproc/qcom_q6v5_wcss.c
-+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
-@@ -139,6 +139,7 @@ struct q6v5_wcss {
- u32 version;
- bool requires_force_stop;
- bool need_mem_protection;
-+ const char *m3_firmware_name;
-
- struct qcom_rproc_glink glink_subdev;
- struct qcom_rproc_ssr ssr_subdev;
-@@ -147,7 +148,8 @@ struct q6v5_wcss {
- struct wcss_data {
- int (*init_clock)(struct q6v5_wcss *wcss);
- int (*init_regulator)(struct q6v5_wcss *wcss);
-- const char *firmware_name;
-+ const char *q6_firmware_name;
-+ const char *m3_firmware_name;
- unsigned int crash_reason_smem;
- u32 version;
- bool aon_reset_required;
-@@ -789,8 +791,29 @@ static void *q6v5_wcss_da_to_va(struct r
- static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
- {
- struct q6v5_wcss *wcss = rproc->priv;
-+ const struct firmware *m3_fw;
- int ret;
-
-+ if (wcss->m3_firmware_name) {
-+ ret = request_firmware(&m3_fw, wcss->m3_firmware_name,
-+ wcss->dev);
-+ if (ret)
-+ goto skip_m3;
-+
-+ ret = qcom_mdt_load_no_init(wcss->dev, m3_fw,
-+ wcss->m3_firmware_name, 0,
-+ wcss->mem_region, wcss->mem_phys,
-+ wcss->mem_size, &wcss->mem_reloc);
-+
-+ release_firmware(m3_fw);
-+
-+ if (ret) {
-+ dev_err(wcss->dev, "can't load m3_fw.bXX\n");
-+ return ret;
-+ }
-+ }
-+
-+skip_m3:
- if (wcss->need_mem_protection)
- ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware,
- WCNSS_PAS_ID, wcss->mem_region,
-@@ -1072,7 +1095,7 @@ static int q6v5_wcss_probe(struct platfo
- return -EPROBE_DEFER;
-
- rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops,
-- desc->firmware_name, sizeof(*wcss));
-+ desc->q6_firmware_name, sizeof(*wcss));
- if (!rproc) {
- dev_err(&pdev->dev, "failed to allocate rproc\n");
- return -ENOMEM;
-@@ -1085,6 +1108,7 @@ static int q6v5_wcss_probe(struct platfo
- wcss->version = desc->version;
- wcss->requires_force_stop = desc->requires_force_stop;
- wcss->need_mem_protection = desc->need_mem_protection;
-+ wcss->m3_firmware_name = desc->m3_firmware_name;
-
- ret = q6v5_wcss_init_mmio(wcss, pdev);
- if (ret)
-@@ -1149,7 +1173,8 @@ static int q6v5_wcss_remove(struct platf
-
- static const struct wcss_data wcss_ipq8074_res_init = {
- .init_clock = ipq8074_init_clock,
-- .firmware_name = "IPQ8074/q6_fw.mdt",
-+ .q6_firmware_name = "IPQ8074/q6_fw.mdt",
-+ .m3_firmware_name = "IPQ8074/m3_fw.mdt",
- .crash_reason_smem = WCSS_CRASH_REASON,
- .aon_reset_required = true,
- .wcss_q6_reset_required = true,
-@@ -1162,7 +1187,7 @@ static const struct wcss_data wcss_qcs40
- .init_clock = qcs404_init_clock,
- .init_regulator = qcs404_init_regulator,
- .crash_reason_smem = WCSS_CRASH_REASON,
-- .firmware_name = "wcnss.mdt",
-+ .q6_firmware_name = "wcnss.mdt",
- .version = WCSS_QCS404,
- .aon_reset_required = false,
- .wcss_q6_reset_required = false,
diff --git a/target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch b/target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch
deleted file mode 100644
index 0ff2d0358b..0000000000
--- a/target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 3a8f67b4770c817b04794c9a02e3f88f85d86280 Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Date: Sat, 30 Jan 2021 10:50:08 +0530
-Subject: [PATCH] remoteproc: qcom: Add ssr subdevice identifier
-
-Add name for ssr subdevice on IPQ8074 SoC.
-
-Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
-Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
----
- drivers/remoteproc/qcom_q6v5_wcss.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/remoteproc/qcom_q6v5_wcss.c
-+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
-@@ -1178,6 +1178,7 @@ static const struct wcss_data wcss_ipq80
- .crash_reason_smem = WCSS_CRASH_REASON,
- .aon_reset_required = true,
- .wcss_q6_reset_required = true,
-+ .ssr_name = "q6wcss",
- .ops = &q6v5_wcss_ipq8074_ops,
- .requires_force_stop = true,
- .need_mem_protection = true,
diff --git a/target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch b/target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch
deleted file mode 100644
index c8e5aceefc..0000000000
--- a/target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 8c73af6e8d78c66cfef0f551b00d375ec0b67ff3 Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Date: Sat, 30 Jan 2021 10:50:09 +0530
-Subject: [PATCH] remoteproc: qcom: Update regmap offsets for halt register
-
-Fixed issue in reading halt-regs parameter from device-tree.
-
-Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
----
- drivers/remoteproc/qcom_q6v5_wcss.c | 22 ++++++++++++++--------
- 1 file changed, 14 insertions(+), 8 deletions(-)
-
---- a/drivers/remoteproc/qcom_q6v5_wcss.c
-+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
-@@ -86,7 +86,7 @@
- #define TCSR_WCSS_CLK_MASK 0x1F
- #define TCSR_WCSS_CLK_ENABLE 0x14
-
--#define MAX_HALT_REG 3
-+#define MAX_HALT_REG 4
-
- #define WCNSS_PAS_ID 6
-
-@@ -154,6 +154,7 @@ struct wcss_data {
- u32 version;
- bool aon_reset_required;
- bool wcss_q6_reset_required;
-+ bool bcr_reset_required;
- const char *ssr_name;
- const char *sysmon_name;
- int ssctl_id;
-@@ -875,10 +876,13 @@ static int q6v5_wcss_init_reset(struct q
- }
- }
-
-- wcss->wcss_q6_bcr_reset = devm_reset_control_get_exclusive(dev, "wcss_q6_bcr_reset");
-- if (IS_ERR(wcss->wcss_q6_bcr_reset)) {
-- dev_err(wcss->dev, "unable to acquire wcss_q6_bcr_reset\n");
-- return PTR_ERR(wcss->wcss_q6_bcr_reset);
-+ if (desc->bcr_reset_required) {
-+ wcss->wcss_q6_bcr_reset = devm_reset_control_get_exclusive(dev,
-+ "wcss_q6_bcr_reset");
-+ if (IS_ERR(wcss->wcss_q6_bcr_reset)) {
-+ dev_err(wcss->dev, "unable to acquire wcss_q6_bcr_reset\n");
-+ return PTR_ERR(wcss->wcss_q6_bcr_reset);
-+ }
- }
-
- return 0;
-@@ -929,9 +933,9 @@ static int q6v5_wcss_init_mmio(struct q6
- return -EINVAL;
- }
-
-- wcss->halt_q6 = halt_reg[0];
-- wcss->halt_wcss = halt_reg[1];
-- wcss->halt_nc = halt_reg[2];
-+ wcss->halt_q6 = halt_reg[1];
-+ wcss->halt_wcss = halt_reg[2];
-+ wcss->halt_nc = halt_reg[3];
-
- return 0;
- }
-@@ -1178,6 +1182,7 @@ static const struct wcss_data wcss_ipq80
- .crash_reason_smem = WCSS_CRASH_REASON,
- .aon_reset_required = true,
- .wcss_q6_reset_required = true,
-+ .bcr_reset_required = false,
- .ssr_name = "q6wcss",
- .ops = &q6v5_wcss_ipq8074_ops,
- .requires_force_stop = true,
-@@ -1192,6 +1197,7 @@ static const struct wcss_data wcss_qcs40
- .version = WCSS_QCS404,
- .aon_reset_required = false,
- .wcss_q6_reset_required = false,
-+ .bcr_reset_required = true,
- .ssr_name = "mpss",
- .sysmon_name = "wcnss",
- .ssctl_id = 0x12,
diff --git a/target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch b/target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch
deleted file mode 100644
index fe0e0f9e0b..0000000000
--- a/target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From ff7c6533ed8c4de58ed6c8aab03ea59c03eb4f31 Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Date: Sat, 30 Jan 2021 10:50:10 +0530
-Subject: [PATCH] dt-bindings: clock: qcom: Add reset for WCSSAON
-
-Add binding for WCSSAON reset required for Q6v5 reset on IPQ8074 SoC.
-
-Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
-Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
-Acked-by: Rob Herring <robh@kernel.org>
-Acked-by: Stephen Boyd <sboyd@kernel.org>
----
- include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h
-+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
-@@ -381,6 +381,7 @@
- #define GCC_NSSPORT4_RESET 143
- #define GCC_NSSPORT5_RESET 144
- #define GCC_NSSPORT6_RESET 145
-+#define GCC_WCSSAON_RESET 146
-
- #define USB0_GDSC 0
- #define USB1_GDSC 1
diff --git a/target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch b/target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch
deleted file mode 100644
index 791531775e..0000000000
--- a/target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 43d9788f546d24df22d8ba3fcc2497d7ccc198f3 Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Date: Sat, 30 Jan 2021 10:50:11 +0530
-Subject: [PATCH] clk: qcom: Add WCSSAON reset
-
-Add WCSSAON reset required for Q6v5 on IPQ8074 SoC.
-
-Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
-Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
-Acked-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/qcom/gcc-ipq8074.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/clk/qcom/gcc-ipq8074.c
-+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -4717,6 +4717,7 @@ static const struct qcom_reset_map gcc_i
- [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) },
- [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) },
- [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) },
-+ [GCC_WCSSAON_RESET] = { 0x59010, 0 },
- };
-
- static struct gdsc *gcc_ipq8074_gdscs[] = {
diff --git a/target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch b/target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch
deleted file mode 100644
index a562f7864e..0000000000
--- a/target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 406a332fd1bcc4e18d73cce390f56272fe9111d7 Mon Sep 17 00:00:00 2001
-From: Sivaprakash Murugesan <sivaprak@codeaurora.org>
-Date: Fri, 17 Apr 2020 16:37:10 +0530
-Subject: [PATCH] remoteproc: wcss: disable auto boot for IPQ8074
-
-There is no need for remoteproc to boot automatically, ath11k will trigger
-booting when its probing.
-
-Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/remoteproc/qcom_q6v5_wcss.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/remoteproc/qcom_q6v5_wcss.c
-+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
-@@ -161,6 +161,7 @@ struct wcss_data {
- const struct rproc_ops *ops;
- bool requires_force_stop;
- bool need_mem_protection;
-+ bool need_auto_boot;
- };
-
- static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
-@@ -1151,6 +1152,7 @@ static int q6v5_wcss_probe(struct platfo
- desc->sysmon_name,
- desc->ssctl_id);
-
-+ rproc->auto_boot = desc->need_auto_boot;
- ret = rproc_add(rproc);
- if (ret)
- goto free_rproc;
-@@ -1187,6 +1189,7 @@ static const struct wcss_data wcss_ipq80
- .ops = &q6v5_wcss_ipq8074_ops,
- .requires_force_stop = true,
- .need_mem_protection = true,
-+ .need_auto_boot = false,
- };
-
- static const struct wcss_data wcss_qcs404_res_init = {
-@@ -1203,6 +1206,7 @@ static const struct wcss_data wcss_qcs40
- .ssctl_id = 0x12,
- .ops = &q6v5_wcss_qcs404_ops,
- .requires_force_stop = false,
-+ .need_auto_boot = true,
- };
-
- static const struct of_device_id q6v5_wcss_of_match[] = {
diff --git a/target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch b/target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch
deleted file mode 100644
index e37ba37e96..0000000000
--- a/target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 7388400b8bd42f71d040dbf2fdbdcb834fcc0ede Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Date: Sat, 30 Jan 2021 10:50:13 +0530
-Subject: [PATCH] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
-
-Enable remoteproc WCSS PIL driver with glink and ssr subdevices.
-Also enables smp2p and mailboxes required for IPC.
-
-Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
-Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 81 +++++++++++++++++++++++++++
- 1 file changed, 81 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -140,6 +140,32 @@
- };
- };
-
-+ wcss: smp2p-wcss {
-+ compatible = "qcom,smp2p";
-+ qcom,smem = <435>, <428>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <0 322 1>;
-+
-+ mboxes = <&apcs_glb 9>;
-+
-+ qcom,local-pid = <0>;
-+ qcom,remote-pid = <1>;
-+
-+ wcss_smp2p_out: master-kernel {
-+ qcom,entry-name = "master-kernel";
-+ qcom,smp2p-feature-ssr-ack;
-+ #qcom,smem-state-cells = <1>;
-+ };
-+
-+ wcss_smp2p_in: slave-kernel {
-+ qcom,entry-name = "slave-kernel";
-+
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ };
-+ };
-+
- soc: soc {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
-@@ -409,6 +435,11 @@
- #hwlock-cells = <1>;
- };
-
-+ tcsr_q6: syscon@1945000 {
-+ compatible = "syscon";
-+ reg = <0x01945000 0xe000>;
-+ };
-+
- spmi_bus: spmi@200f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0200f000 0x001000>,
-@@ -913,6 +944,56 @@
- "axi_s_sticky";
- status = "disabled";
- };
-+
-+ q6v5_wcss: q6v5_wcss@cd00000 {
-+ compatible = "qcom,ipq8074-wcss-pil";
-+ reg = <0x0cd00000 0x4040>,
-+ <0x004ab000 0x20>;
-+ reg-names = "qdsp6",
-+ "rmb";
-+ qca,auto-restart;
-+ qca,extended-intc;
-+ interrupts-extended = <&intc 0 325 1>,
-+ <&wcss_smp2p_in 0 0>,
-+ <&wcss_smp2p_in 1 0>,
-+ <&wcss_smp2p_in 2 0>,
-+ <&wcss_smp2p_in 3 0>;
-+ interrupt-names = "wdog",
-+ "fatal",
-+ "ready",
-+ "handover",
-+ "stop-ack";
-+
-+ resets = <&gcc GCC_WCSSAON_RESET>,
-+ <&gcc GCC_WCSS_BCR>,
-+ <&gcc GCC_WCSS_Q6_BCR>;
-+
-+ reset-names = "wcss_aon_reset",
-+ "wcss_reset",
-+ "wcss_q6_reset";
-+
-+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
-+ clock-names = "prng";
-+
-+ qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>;
-+
-+ qcom,smem-states = <&wcss_smp2p_out 0>,
-+ <&wcss_smp2p_out 1>;
-+ qcom,smem-state-names = "shutdown",
-+ "stop";
-+
-+ memory-region = <&q6_region>;
-+
-+ glink-edge {
-+ interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
-+ qcom,remote-pid = <1>;
-+ mboxes = <&apcs_glb 8>;
-+
-+ rpm_requests {
-+ qcom,glink-channels = "IPCRTR";
-+ };
-+ };
-+ };
- };
-
- timer {
diff --git a/target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch b/target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch
deleted file mode 100644
index bd5410c934..0000000000
--- a/target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From a67d1901741c162645eda0dbdc3a2c0c2aff5cf4 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Tue, 21 Dec 2021 14:49:36 +0100
-Subject: [PATCH] arm64: dts: ipq8074: Add WLAN node
-
-IPQ8074 has a AHB based Q6v5 802.11ax radios that are supported
-by the ath11k.
-
-Add the required DT node to enable the built-in radios.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 111 ++++++++++++++++++++++++++
- 1 file changed, 111 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -994,6 +994,117 @@
- };
- };
- };
-+
-+ wifi: wifi@c0000000 {
-+ compatible = "qcom,ipq8074-wifi";
-+ reg = <0xc000000 0x2000000>;
-+
-+ interrupts = <GIC_SPI 320 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 319 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 316 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 302 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 301 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 239 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 231 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 230 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 224 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 223 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-+
-+ interrupt-names = "misc-pulse1",
-+ "misc-latch",
-+ "sw-exception",
-+ "ce0",
-+ "ce1",
-+ "ce2",
-+ "ce3",
-+ "ce4",
-+ "ce5",
-+ "ce6",
-+ "ce7",
-+ "ce8",
-+ "ce9",
-+ "ce10",
-+ "ce11",
-+ "host2wbm-desc-feed",
-+ "host2reo-re-injection",
-+ "host2reo-command",
-+ "host2rxdma-monitor-ring3",
-+ "host2rxdma-monitor-ring2",
-+ "host2rxdma-monitor-ring1",
-+ "reo2ost-exception",
-+ "wbm2host-rx-release",
-+ "reo2host-status",
-+ "reo2host-destination-ring4",
-+ "reo2host-destination-ring3",
-+ "reo2host-destination-ring2",
-+ "reo2host-destination-ring1",
-+ "rxdma2host-monitor-destination-mac3",
-+ "rxdma2host-monitor-destination-mac2",
-+ "rxdma2host-monitor-destination-mac1",
-+ "ppdu-end-interrupts-mac3",
-+ "ppdu-end-interrupts-mac2",
-+ "ppdu-end-interrupts-mac1",
-+ "rxdma2host-monitor-status-ring-mac3",
-+ "rxdma2host-monitor-status-ring-mac2",
-+ "rxdma2host-monitor-status-ring-mac1",
-+ "host2rxdma-host-buf-ring-mac3",
-+ "host2rxdma-host-buf-ring-mac2",
-+ "host2rxdma-host-buf-ring-mac1",
-+ "rxdma2host-destination-ring-mac3",
-+ "rxdma2host-destination-ring-mac2",
-+ "rxdma2host-destination-ring-mac1",
-+ "host2tcl-input-ring4",
-+ "host2tcl-input-ring3",
-+ "host2tcl-input-ring2",
-+ "host2tcl-input-ring1",
-+ "wbm2host-tx-completions-ring3",
-+ "wbm2host-tx-completions-ring2",
-+ "wbm2host-tx-completions-ring1",
-+ "tcl2host-status-ring";
-+ qcom,rproc = <&q6v5_wcss>;
-+ status = "disabled";
-+ };
- };
-
- timer {
diff --git a/target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch b/target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch
deleted file mode 100644
index a3c5f344ab..0000000000
--- a/target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From cb3ef99c1553565e1dc0301ccd5c1c0fa2d15c15 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 31 Dec 2021 17:56:14 +0100
-Subject: [PATCH] arm64: dts: ipq8074: add CPU clock
-
-Now that CPU clock is exposed and can be controlled, add the necessary
-properties to the CPU nodes.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -5,6 +5,7 @@
-
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/qcom,gcc-ipq8074.h>
-+#include <dt-bindings/clock/qcom,apss-ipq.h>
-
- / {
- #address-cells = <2>;
-@@ -38,6 +39,8 @@
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
-+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
-+ clock-names = "cpu";
- };
-
- CPU1: cpu@1 {
-@@ -46,6 +49,8 @@
- enable-method = "psci";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
-+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
-+ clock-names = "cpu";
- };
-
- CPU2: cpu@2 {
-@@ -54,6 +59,8 @@
- enable-method = "psci";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
-+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
-+ clock-names = "cpu";
- };
-
- CPU3: cpu@3 {
-@@ -62,6 +69,8 @@
- enable-method = "psci";
- reg = <0x3>;
- next-level-cache = <&L2_0>;
-+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
-+ clock-names = "cpu";
- };
-
- L2_0: l2-cache {
diff --git a/target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch b/target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch
deleted file mode 100644
index 3520b38134..0000000000
--- a/target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 347ca56e86c99021fad059b9a8ef101245b8507e Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 31 Dec 2021 20:38:06 +0100
-Subject: [PATCH] arm64: dts: ipq8074: add cooling cells to CPU nodes
-
-Since there is CPU Freq support as well as thermal sensor support
-now for the IPQ8074, add cooling cells to CPU nodes so that they can
-be used as cooling devices using CPU Freq.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -41,6 +41,7 @@
- enable-method = "psci";
- clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
- clock-names = "cpu";
-+ #cooling-cells = <2>;
- };
-
- CPU1: cpu@1 {
-@@ -51,6 +52,7 @@
- next-level-cache = <&L2_0>;
- clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
- clock-names = "cpu";
-+ #cooling-cells = <2>;
- };
-
- CPU2: cpu@2 {
-@@ -61,6 +63,7 @@
- next-level-cache = <&L2_0>;
- clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
- clock-names = "cpu";
-+ #cooling-cells = <2>;
- };
-
- CPU3: cpu@3 {
-@@ -71,6 +74,7 @@
- next-level-cache = <&L2_0>;
- clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
- clock-names = "cpu";
-+ #cooling-cells = <2>;
- };
-
- L2_0: l2-cache {
diff --git a/target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch b/target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch
deleted file mode 100644
index 30f6e988aa..0000000000
--- a/target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From 97505f4c049fa2e8c86a53411a9e599033898533 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sat, 31 Dec 2022 00:27:42 +0100
-Subject: [PATCH] soc: qcom: socinfo: move SMEM item struct and defines to a
- header
-
-Move SMEM item struct and related defines to a header in order to be able
-to reuse them in the Qualcomm NVMEM CPUFreq driver instead of duplicating
-them.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/soc/qcom/socinfo.c | 58 +--------------------------
- include/linux/soc/qcom/socinfo.h | 67 ++++++++++++++++++++++++++++++++
- 2 files changed, 68 insertions(+), 57 deletions(-)
- create mode 100644 include/linux/soc/qcom/socinfo.h
-
---- a/drivers/soc/qcom/socinfo.c
-+++ b/drivers/soc/qcom/socinfo.c
-@@ -11,6 +11,7 @@
- #include <linux/random.h>
- #include <linux/slab.h>
- #include <linux/soc/qcom/smem.h>
-+#include <linux/soc/qcom/socinfo.h>
- #include <linux/string.h>
- #include <linux/sys_soc.h>
- #include <linux/types.h>
-@@ -25,15 +26,6 @@
- #define SOCINFO_MINOR(ver) ((ver) & 0xffff)
- #define SOCINFO_VERSION(maj, min) ((((maj) & 0xffff) << 16)|((min) & 0xffff))
-
--#define SMEM_SOCINFO_BUILD_ID_LENGTH 32
--#define SMEM_SOCINFO_CHIP_ID_LENGTH 32
--
--/*
-- * SMEM item id, used to acquire handles to respective
-- * SMEM region.
-- */
--#define SMEM_HW_SW_BUILD_ID 137
--
- #ifdef CONFIG_DEBUG_FS
- #define SMEM_IMAGE_VERSION_BLOCKS_COUNT 32
- #define SMEM_IMAGE_VERSION_SIZE 4096
-@@ -105,54 +97,6 @@ static const char *const pmic_models[] =
- };
- #endif /* CONFIG_DEBUG_FS */
-
--/* Socinfo SMEM item structure */
--struct socinfo {
-- __le32 fmt;
-- __le32 id;
-- __le32 ver;
-- char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH];
-- /* Version 2 */
-- __le32 raw_id;
-- __le32 raw_ver;
-- /* Version 3 */
-- __le32 hw_plat;
-- /* Version 4 */
-- __le32 plat_ver;
-- /* Version 5 */
-- __le32 accessory_chip;
-- /* Version 6 */
-- __le32 hw_plat_subtype;
-- /* Version 7 */
-- __le32 pmic_model;
-- __le32 pmic_die_rev;
-- /* Version 8 */
-- __le32 pmic_model_1;
-- __le32 pmic_die_rev_1;
-- __le32 pmic_model_2;
-- __le32 pmic_die_rev_2;
-- /* Version 9 */
-- __le32 foundry_id;
-- /* Version 10 */
-- __le32 serial_num;
-- /* Version 11 */
-- __le32 num_pmics;
-- __le32 pmic_array_offset;
-- /* Version 12 */
-- __le32 chip_family;
-- __le32 raw_device_family;
-- __le32 raw_device_num;
-- /* Version 13 */
-- __le32 nproduct_id;
-- char chip_id[SMEM_SOCINFO_CHIP_ID_LENGTH];
-- /* Version 14 */
-- __le32 num_clusters;
-- __le32 ncluster_array_offset;
-- __le32 num_defective_parts;
-- __le32 ndefective_parts_array_offset;
-- /* Version 15 */
-- __le32 nmodem_supported;
--};
--
- #ifdef CONFIG_DEBUG_FS
- struct socinfo_params {
- u32 raw_device_family;
---- /dev/null
-+++ b/include/linux/soc/qcom/socinfo.h
-@@ -0,0 +1,67 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2009-2017, The Linux Foundation. All rights reserved.
-+ * Copyright (c) 2017-2019, Linaro Ltd.
-+ */
-+
-+#ifndef __QCOM_SOCINFO_H__
-+#define __QCOM_SOCINFO_H__
-+
-+/*
-+ * SMEM item id, used to acquire handles to respective
-+ * SMEM region.
-+ */
-+#define SMEM_HW_SW_BUILD_ID 137
-+
-+#define SMEM_SOCINFO_BUILD_ID_LENGTH 32
-+#define SMEM_SOCINFO_CHIP_ID_LENGTH 32
-+
-+/* Socinfo SMEM item structure */
-+struct socinfo {
-+ __le32 fmt;
-+ __le32 id;
-+ __le32 ver;
-+ char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH];
-+ /* Version 2 */
-+ __le32 raw_id;
-+ __le32 raw_ver;
-+ /* Version 3 */
-+ __le32 hw_plat;
-+ /* Version 4 */
-+ __le32 plat_ver;
-+ /* Version 5 */
-+ __le32 accessory_chip;
-+ /* Version 6 */
-+ __le32 hw_plat_subtype;
-+ /* Version 7 */
-+ __le32 pmic_model;
-+ __le32 pmic_die_rev;
-+ /* Version 8 */
-+ __le32 pmic_model_1;
-+ __le32 pmic_die_rev_1;
-+ __le32 pmic_model_2;
-+ __le32 pmic_die_rev_2;
-+ /* Version 9 */
-+ __le32 foundry_id;
-+ /* Version 10 */
-+ __le32 serial_num;
-+ /* Version 11 */
-+ __le32 num_pmics;
-+ __le32 pmic_array_offset;
-+ /* Version 12 */
-+ __le32 chip_family;
-+ __le32 raw_device_family;
-+ __le32 raw_device_num;
-+ /* Version 13 */
-+ __le32 nproduct_id;
-+ char chip_id[SMEM_SOCINFO_CHIP_ID_LENGTH];
-+ /* Version 14 */
-+ __le32 num_clusters;
-+ __le32 ncluster_array_offset;
-+ __le32 num_defective_parts;
-+ __le32 ndefective_parts_array_offset;
-+ /* Version 15 */
-+ __le32 nmodem_supported;
-+};
-+
-+#endif
diff --git a/target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch b/target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch
deleted file mode 100644
index aa7fe5a868..0000000000
--- a/target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From b7b7ea3a0cab42d4f1d4c9ae9eb7c7a3d03e7982 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 30 Dec 2022 22:51:47 +0100
-Subject: [PATCH] cpufreq: qcom-nvmem: reuse socinfo SMEM item struct
-
-Now that socinfo SMEM item struct and defines have been moved to a header
-so we can utilize that instead.
-
-Now the SMEM value can be accesed directly, there is no need for defining
-the ID for the SMEM request as well.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 14 +++++---------
- 1 file changed, 5 insertions(+), 9 deletions(-)
-
---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -28,8 +28,7 @@
- #include <linux/pm_opp.h>
- #include <linux/slab.h>
- #include <linux/soc/qcom/smem.h>
--
--#define MSM_ID_SMEM 137
-+#include <linux/soc/qcom/socinfo.h>
-
- enum _msm_id {
- MSM8996V3 = 0xF6ul,
-@@ -145,17 +144,14 @@ static void get_krait_bin_format_b(struc
- static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
- {
- size_t len;
-- u32 *msm_id;
-+ struct socinfo *info;
- enum _msm8996_version version;
-
-- msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
-- if (IS_ERR(msm_id))
-+ info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, &len);
-+ if (IS_ERR(info))
- return NUM_OF_MSM8996_VERSIONS;
-
-- /* The first 4 bytes are format, next to them is the actual msm-id */
-- msm_id++;
--
-- switch ((enum _msm_id)*msm_id) {
-+ switch (info->id) {
- case MSM8996V3:
- case APQ8096V3:
- version = MSM8996_V3;
diff --git a/target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch b/target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch
deleted file mode 100644
index 3303b40277..0000000000
--- a/target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 132b2f15b8ae3f848b3e6f2962f409cfab0ca759 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 30 Dec 2022 23:33:47 +0100
-Subject: [PATCH] cpufreq: qcom-nvmem: use SoC ID-s from bindings
-
-SMEM SoC ID-s are now stored in DT bindings so lets use those instead of
-defining them in the driver again.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++----------
- 1 file changed, 5 insertions(+), 10 deletions(-)
-
---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -30,12 +30,7 @@
- #include <linux/soc/qcom/smem.h>
- #include <linux/soc/qcom/socinfo.h>
-
--enum _msm_id {
-- MSM8996V3 = 0xF6ul,
-- APQ8096V3 = 0x123ul,
-- MSM8996SG = 0x131ul,
-- APQ8096SG = 0x138ul,
--};
-+#include <dt-bindings/arm/qcom,ids.h>
-
- enum _msm8996_version {
- MSM8996_V3,
-@@ -152,12 +147,12 @@ static enum _msm8996_version qcom_cpufre
- return NUM_OF_MSM8996_VERSIONS;
-
- switch (info->id) {
-- case MSM8996V3:
-- case APQ8096V3:
-+ case QCOM_ID_MSM8996:
-+ case QCOM_ID_APQ8096:
- version = MSM8996_V3;
- break;
-- case MSM8996SG:
-- case APQ8096SG:
-+ case QCOM_ID_MSM8996SG:
-+ case QCOM_ID_APQ8096SG:
- version = MSM8996_SG;
- break;
- default:
diff --git a/target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch b/target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch
deleted file mode 100644
index 768866b1b2..0000000000
--- a/target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 85bf71b130ab0e939f53ec9cf1131d67d148bc9a Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sat, 31 Dec 2022 12:45:31 +0100
-Subject: [PATCH] cpufreq: qcom-nvmem: make qcom_cpufreq_get_msm_id() return
- the SoC ID
-
-Currently, qcom_cpufreq_get_msm_id() does not simply return the SoC ID
-after getting it via SMEM call but instead uses an enum to encode the
-matched SMEM ID to 2 variants of MSM8996 which are then used in
-qcom_cpufreq_kryo_name_version() to set the supported version.
-
-This prevents qcom_cpufreq_get_msm_id() from being universal and its doing
-more than its name suggests, so lets make it just return the SoC ID
-directly which allows matching directly on the SoC ID and removes the need
-for msm8996_version enum which simplifies the driver.
-It also allows reusing the qcom_cpufreq_get_msm_id() for new SoC-s.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 44 ++++++++--------------------
- 1 file changed, 12 insertions(+), 32 deletions(-)
-
---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -32,12 +32,6 @@
-
- #include <dt-bindings/arm/qcom,ids.h>
-
--enum _msm8996_version {
-- MSM8996_V3,
-- MSM8996_SG,
-- NUM_OF_MSM8996_VERSIONS,
--};
--
- struct qcom_cpufreq_drv;
-
- struct qcom_cpufreq_match_data {
-@@ -136,30 +130,16 @@ static void get_krait_bin_format_b(struc
- dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
- }
-
--static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
-+static int qcom_cpufreq_get_msm_id(void)
- {
- size_t len;
- struct socinfo *info;
-- enum _msm8996_version version;
-
- info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, &len);
- if (IS_ERR(info))
-- return NUM_OF_MSM8996_VERSIONS;
--
-- switch (info->id) {
-- case QCOM_ID_MSM8996:
-- case QCOM_ID_APQ8096:
-- version = MSM8996_V3;
-- break;
-- case QCOM_ID_MSM8996SG:
-- case QCOM_ID_APQ8096SG:
-- version = MSM8996_SG;
-- break;
-- default:
-- version = NUM_OF_MSM8996_VERSIONS;
-- }
-+ return PTR_ERR(info);
-
-- return version;
-+ return info->id;
- }
-
- static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
-@@ -168,25 +148,25 @@ static int qcom_cpufreq_kryo_name_versio
- struct qcom_cpufreq_drv *drv)
- {
- size_t len;
-+ int msm_id;
- u8 *speedbin;
-- enum _msm8996_version msm8996_version;
- *pvs_name = NULL;
-
-- msm8996_version = qcom_cpufreq_get_msm_id();
-- if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
-- dev_err(cpu_dev, "Not Snapdragon 820/821!");
-- return -ENODEV;
-- }
-+ msm_id = qcom_cpufreq_get_msm_id();
-+ if (msm_id < 0)
-+ return msm_id;
-
- speedbin = nvmem_cell_read(speedbin_nvmem, &len);
- if (IS_ERR(speedbin))
- return PTR_ERR(speedbin);
-
-- switch (msm8996_version) {
-- case MSM8996_V3:
-+ switch (msm_id) {
-+ case QCOM_ID_MSM8996:
-+ case QCOM_ID_APQ8096:
- drv->versions = 1 << (unsigned int)(*speedbin);
- break;
-- case MSM8996_SG:
-+ case QCOM_ID_MSM8996SG:
-+ case QCOM_ID_APQ8096SG:
- drv->versions = 1 << ((unsigned int)(*speedbin) + 4);
- break;
- default:
diff --git a/target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch b/target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch
deleted file mode 100644
index 49fd4e4cc0..0000000000
--- a/target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 813f2b5ad002e691b92154037f154b4444eedd54 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sat, 31 Dec 2022 13:03:41 +0100
-Subject: [PATCH] cpufreq: qcom-nvmem: add support for IPQ8074
-
-IPQ8074 comes in 2 families:
-* IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz
-* IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz
-
-So, in order to be able to share one OPP table lets add support for IPQ8074
-family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074.
-
-IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device
-will get created by NVMEM CPUFreq driver.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 39 ++++++++++++++++++++++++++++
- 2 files changed, 40 insertions(+)
-
---- a/drivers/cpufreq/cpufreq-dt-platdev.c
-+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
-@@ -159,6 +159,7 @@ static const struct of_device_id blockli
- { .compatible = "ti,omap3", },
-
- { .compatible = "qcom,ipq8064", },
-+ { .compatible = "qcom,ipq8074", },
- { .compatible = "qcom,apq8064", },
- { .compatible = "qcom,msm8974", },
- { .compatible = "qcom,msm8960", },
---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -32,6 +32,9 @@
-
- #include <dt-bindings/arm/qcom,ids.h>
-
-+#define IPQ8074_HAWKEYE_VERSION BIT(0)
-+#define IPQ8074_ACORN_VERSION BIT(1)
-+
- struct qcom_cpufreq_drv;
-
- struct qcom_cpufreq_match_data {
-@@ -218,6 +221,37 @@ len_error:
- return ret;
- }
-
-+static int qcom_cpufreq_ipq8074_name_version(struct device *cpu_dev,
-+ struct nvmem_cell *speedbin_nvmem,
-+ char **pvs_name,
-+ struct qcom_cpufreq_drv *drv)
-+{
-+ int msm_id;
-+ *pvs_name = NULL;
-+
-+ msm_id = qcom_cpufreq_get_msm_id();
-+ if (msm_id < 0)
-+ return msm_id;
-+
-+ switch (msm_id) {
-+ case QCOM_ID_IPQ8070A:
-+ case QCOM_ID_IPQ8071A:
-+ drv->versions = IPQ8074_ACORN_VERSION;
-+ break;
-+ case QCOM_ID_IPQ8072A:
-+ case QCOM_ID_IPQ8074A:
-+ case QCOM_ID_IPQ8076A:
-+ case QCOM_ID_IPQ8078A:
-+ drv->versions = IPQ8074_HAWKEYE_VERSION;
-+ break;
-+ default:
-+ BUG();
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
- static const struct qcom_cpufreq_match_data match_data_kryo = {
- .get_version = qcom_cpufreq_kryo_name_version,
- };
-@@ -232,6 +266,10 @@ static const struct qcom_cpufreq_match_d
- .genpd_names = qcs404_genpd_names,
- };
-
-+static const struct qcom_cpufreq_match_data match_data_ipq8074 = {
-+ .get_version = qcom_cpufreq_ipq8074_name_version,
-+};
-+
- static int qcom_cpufreq_probe(struct platform_device *pdev)
- {
- struct qcom_cpufreq_drv *drv;
-@@ -431,6 +469,7 @@ static const struct of_device_id qcom_cp
- { .compatible = "qcom,msm8996", .data = &match_data_kryo },
- { .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
- { .compatible = "qcom,ipq8064", .data = &match_data_krait },
-+ { .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 },
- { .compatible = "qcom,apq8064", .data = &match_data_krait },
- { .compatible = "qcom,msm8974", .data = &match_data_krait },
- { .compatible = "qcom,msm8960", .data = &match_data_krait },
diff --git a/target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch b/target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch
deleted file mode 100644
index 3a6f4e9c87..0000000000
--- a/target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 04d2fc6a551bbd972a6428059b45ce79cb9de9d7 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 6 May 2022 22:38:24 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add QFPROM fuses
-
-Add the QFPROM node and CPR fuses.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 107 ++++++++++++++++++++++++++
- 1 file changed, 107 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -340,6 +340,113 @@
- status = "disabled";
- };
-
-+ qfprom: efuse@a4000 {
-+ compatible = "qcom,ipq8074-qfprom", "qcom,qfprom";
-+ reg = <0x000a4000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ cpr_efuse_speedbin: speedbin@125 {
-+ reg = <0x125 0x1>;
-+ bits = <0 3>;
-+ };
-+
-+ cpr_efuse_boost_cfg: boost_cfg@125 {
-+ reg = <0x125 0x1>;
-+ bits = <3 3>;
-+ };
-+
-+ cpr_efuse_misc_volt_adj: misc_volt_adj@125 {
-+ reg = <0x125 0x1>;
-+ bits = <3 3>;
-+ };
-+
-+ cpr_efuse_boost_volt: boost_volt@126 {
-+ reg = <0x126 0x1>;
-+ bits = <6 1>;
-+ };
-+
-+ cpr_efuse_revision: revision@23e {
-+ reg = <0x23e 0x1>;
-+ bits = <5 3>;
-+ };
-+
-+ cpr_efuse_ro_sel0: rosel0@249 {
-+ reg = <0x249 0x1>;
-+ bits = <0 4>;
-+ };
-+
-+ cpr_efuse_ro_sel1: rosel1@248 {
-+ reg = <0x248 0x1>;
-+ bits = <4 4>;
-+ };
-+
-+ cpr_efuse_ro_sel2: rosel2@248 {
-+ reg = <0x248 0x2>;
-+ bits = <0 4>;
-+ };
-+
-+ cpr_efuse_ro_sel3: rosel3@249 {
-+ reg = <0x249 0x1>;
-+ bits = <4 4>;
-+ };
-+
-+ cpr_efuse_init_voltage0: ivoltage0@23a {
-+ reg = <0x23a 0x1>;
-+ bits = <2 6>;
-+ };
-+
-+ cpr_efuse_init_voltage1: ivoltage1@239 {
-+ reg = <0x239 0x2>;
-+ bits = <4 6>;
-+ };
-+
-+ cpr_efuse_init_voltage2: ivoltage2@238 {
-+ reg = <0x238 0x2>;
-+ bits = <6 6>;
-+ };
-+
-+ cpr_efuse_init_voltage3: ivoltage3@238 {
-+ reg = <0x238 0x1>;
-+ bits = <0 6>;
-+ };
-+
-+ cpr_efuse_quot0: quot0@244 {
-+ reg = <0x244 0x2>;
-+ bits = <0 12>;
-+ };
-+
-+ cpr_efuse_quot1: quot1@242 {
-+ reg = <0x242 0x2>;
-+ bits = <4 12>;
-+ };
-+
-+ cpr_efuse_quot2: quot2@241 {
-+ reg = <0x241 0x2>;
-+ bits = <0 12>;
-+ };
-+
-+ cpr_efuse_quot3: quot3@245 {
-+ reg = <0x245 0x2>;
-+ bits = <4 12>;
-+ };
-+
-+ cpr_efuse_quot0_offset: quot0_offset@23d {
-+ reg = <0x23d 0x2>;
-+ bits = <6 7>;
-+ };
-+
-+ cpr_efuse_quot1_offset: quot1_offset@23c {
-+ reg = <0x23c 0x2>;
-+ bits = <7 7>;
-+ };
-+
-+ cpr_efuse_quot2_offset: quot2_offset@23c {
-+ reg = <0x23c 0x1>;
-+ bits = <0 7>;
-+ };
-+ };
-+
- prng: rng@e3000 {
- compatible = "qcom,prng-ee";
- reg = <0x000e3000 0x1000>;
diff --git a/target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch b/target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch
deleted file mode 100644
index 9c1e7b9d29..0000000000
--- a/target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From a20c4e8738a00087aa5d53fe5148ed484e23d229 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sat, 31 Dec 2022 13:56:26 +0100
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add CPU OPP table
-
-Now that there is NVMEM CPUFreq support for IPQ8074, we can add the OPP
-table for SoC.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 52 +++++++++++++++++++++++++++
- 1 file changed, 52 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -42,6 +42,7 @@
- clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
- clock-names = "cpu";
- #cooling-cells = <2>;
-+ operating-points-v2 = <&cpu_opp_table>;
- };
-
- CPU1: cpu@1 {
-@@ -53,6 +54,7 @@
- clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
- clock-names = "cpu";
- #cooling-cells = <2>;
-+ operating-points-v2 = <&cpu_opp_table>;
- };
-
- CPU2: cpu@2 {
-@@ -64,6 +66,7 @@
- clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
- clock-names = "cpu";
- #cooling-cells = <2>;
-+ operating-points-v2 = <&cpu_opp_table>;
- };
-
- CPU3: cpu@3 {
-@@ -75,6 +78,7 @@
- clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
- clock-names = "cpu";
- #cooling-cells = <2>;
-+ operating-points-v2 = <&cpu_opp_table>;
- };
-
- L2_0: l2-cache {
-@@ -83,6 +87,54 @@
- };
- };
-
-+ cpu_opp_table: opp-table {
-+ compatible = "operating-points-v2-kryo-cpu";
-+ nvmem-cells = <&cpr_efuse_speedbin>;
-+ opp-shared;
-+
-+ opp-1017600000 {
-+ opp-hz = /bits/ 64 <1017600000>;
-+ opp-microvolt = <1>;
-+ opp-supported-hw = <0xf>;
-+ clock-latency-ns = <200000>;
-+ };
-+
-+ opp-1382400000 {
-+ opp-hz = /bits/ 64 <1382400000>;
-+ opp-microvolt = <2>;
-+ opp-supported-hw = <0xf>;
-+ clock-latency-ns = <200000>;
-+ };
-+
-+ opp-1651200000 {
-+ opp-hz = /bits/ 64 <1651200000>;
-+ opp-microvolt = <3>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <200000>;
-+ };
-+
-+ opp-1843200000 {
-+ opp-hz = /bits/ 64 <1843200000>;
-+ opp-microvolt = <4>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <200000>;
-+ };
-+
-+ opp-1920000000 {
-+ opp-hz = /bits/ 64 <1920000000>;
-+ opp-microvolt = <5>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <200000>;
-+ };
-+
-+ opp-2208000000 {
-+ opp-hz = /bits/ 64 <2208000000>;
-+ opp-microvolt = <6>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <200000>;
-+ };
-+ };
-+
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
diff --git a/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch b/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch
deleted file mode 100644
index eb772be4ce..0000000000
--- a/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 614d31c231c7707322b643f409eeb7e28adc7f8c Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 8 Jan 2023 13:36:28 +0100
-Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for usb3phy-s
-
-Having only .name populated in parent_data for clocks which are only
-globally searchable currently will not work as the clk core won't copy
-that name if there is no .fw_name present as well.
-
-So, populate .fw_name for usb3phy clocks in parent_data as they were
-missed by me in ("clk: qcom: ipq8074: populate fw_name for all parents").
-
-Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data")
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/clk/qcom/gcc-ipq8074.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/qcom/gcc-ipq8074.c
-+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -934,7 +934,7 @@ static struct clk_rcg2 usb0_mock_utmi_cl
- };
-
- static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = {
-- { .name = "usb3phy_0_cc_pipe_clk" },
-+ { .fw_name = "usb3phy_0_cc_pipe_clk", .name = "usb3phy_0_cc_pipe_clk" },
- { .fw_name = "xo", .name = "xo" },
- };
-
-@@ -1002,7 +1002,7 @@ static struct clk_rcg2 usb1_mock_utmi_cl
- };
-
- static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = {
-- { .name = "usb3phy_1_cc_pipe_clk" },
-+ { .fw_name = "usb3phy_1_cc_pipe_clk", .name = "usb3phy_1_cc_pipe_clk" },
- { .fw_name = "xo", .name = "xo" },
- };
-
diff --git a/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch b/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch
deleted file mode 100644
index 2e5c72b7d1..0000000000
--- a/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch
+++ /dev/null
@@ -1,1047 +0,0 @@
-From 6c98adf98236b8644b8f5e1aa7af9f1a88ea2766 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 11 Apr 2022 14:38:08 +0200
-Subject: [PATCH] power: Add Qualcomm APM
-
-Add Qualcomm APM driver, which allows scaling cache and memory fabrics.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/power/Kconfig | 1 +
- drivers/power/Makefile | 1 +
- drivers/power/qcom/Kconfig | 7 +
- drivers/power/qcom/Makefile | 1 +
- drivers/power/qcom/apm.c | 944 +++++++++++++++++++++++++++++++++
- include/linux/power/qcom/apm.h | 48 ++
- 6 files changed, 1002 insertions(+)
- create mode 100644 drivers/power/qcom/Kconfig
- create mode 100644 drivers/power/qcom/Makefile
- create mode 100644 drivers/power/qcom/apm.c
- create mode 100644 include/linux/power/qcom/apm.h
-
---- a/drivers/power/Kconfig
-+++ b/drivers/power/Kconfig
-@@ -1,3 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0-only
- source "drivers/power/reset/Kconfig"
- source "drivers/power/supply/Kconfig"
-+source "drivers/power/qcom/Kconfig"
---- a/drivers/power/Makefile
-+++ b/drivers/power/Makefile
-@@ -1,3 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0-only
- obj-$(CONFIG_POWER_RESET) += reset/
- obj-$(CONFIG_POWER_SUPPLY) += supply/
-+obj-$(CONFIG_QCOM_APM) += qcom/
---- /dev/null
-+++ b/drivers/power/qcom/Kconfig
-@@ -0,0 +1,7 @@
-+config QCOM_APM
-+ bool "Qualcomm Technologies Inc platform specific APM driver"
-+ help
-+ Platform specific driver to manage the power source of
-+ memory arrays. Interfaces with regulator drivers to ensure
-+ SRAM Vmin requirements are met across different performance
-+ levels.
---- /dev/null
-+++ b/drivers/power/qcom/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_QCOM_APM) += apm.o
---- /dev/null
-+++ b/drivers/power/qcom/apm.c
-@@ -0,0 +1,944 @@
-+/*
-+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define pr_fmt(fmt) "%s: " fmt, __func__
-+
-+#include <linux/debugfs.h>
-+#include <linux/delay.h>
-+#include <linux/of_device.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/power/qcom/apm.h>
-+
-+/*
-+ * VDD_APCC
-+ * =============================================================
-+ * | VDD_MX | |
-+ * | ==========================|============= |
-+ * ___|___ ___|___ ___|___ ___|___ ___|___ ___|___
-+ * | | | | | | | | | | | |
-+ * | APCC | | MX HS | | MX HS | | APCC | | MX HS | | APCC |
-+ * | HS | | | | | | HS | | | | HS |
-+ * |_______| |_______| |_______| |_______| |_______| |_______|
-+ * |_________| |_________| |__________|
-+ * | | |
-+ * ______|_____ ______|_____ _______|_____
-+ * | | | | | |
-+ * | | | | | |
-+ * | CPU MEM | | L2 MEM | | L3 MEM |
-+ * | Arrays | | Arrays | | Arrays |
-+ * | | | | | |
-+ * |____________| |____________| |_____________|
-+ *
-+ */
-+
-+/* Register value definitions */
-+#define APCS_GFMUXA_SEL_VAL 0x13
-+#define APCS_GFMUXA_DESEL_VAL 0x03
-+#define MSM_APM_MX_MODE_VAL 0x00
-+#define MSM_APM_APCC_MODE_VAL 0x10
-+#define MSM_APM_MX_DONE_VAL 0x00
-+#define MSM_APM_APCC_DONE_VAL 0x03
-+#define MSM_APM_OVERRIDE_SEL_VAL 0xb0
-+#define MSM_APM_SEC_CLK_SEL_VAL 0x30
-+#define SPM_EVENT_SET_VAL 0x01
-+#define SPM_EVENT_CLEAR_VAL 0x00
-+
-+/* Register bit mask definitions */
-+#define MSM_APM_CTL_STS_MASK 0x0f
-+
-+/* Register offset definitions */
-+#define APCC_APM_MODE 0x00000098
-+#define APCC_APM_CTL_STS 0x000000a8
-+#define APCS_SPARE 0x00000068
-+#define APCS_VERSION 0x00000fd0
-+
-+#define HMSS_VERSION_1P2 0x10020000
-+
-+#define MSM_APM_SWITCH_TIMEOUT_US 10
-+#define SPM_WAKEUP_DELAY_US 2
-+#define SPM_EVENT_NUM 6
-+
-+#define MSM_APM_DRIVER_NAME "qcom,msm-apm"
-+
-+enum {
-+ MSM8996_ID,
-+ MSM8953_ID,
-+ IPQ807x_ID,
-+};
-+
-+struct msm_apm_ctrl_dev {
-+ struct list_head list;
-+ struct device *dev;
-+ enum msm_apm_supply supply;
-+ spinlock_t lock;
-+ void __iomem *reg_base;
-+ void __iomem *apcs_csr_base;
-+ void __iomem **apcs_spm_events_addr;
-+ void __iomem *apc0_pll_ctl_addr;
-+ void __iomem *apc1_pll_ctl_addr;
-+ u32 version;
-+ struct dentry *debugfs;
-+ u32 msm_id;
-+};
-+
-+#if defined(CONFIG_DEBUG_FS)
-+static struct dentry *apm_debugfs_base;
-+#endif
-+
-+static DEFINE_MUTEX(apm_ctrl_list_mutex);
-+static LIST_HEAD(apm_ctrl_list);
-+
-+/*
-+ * Get the resources associated with the APM controller from device tree
-+ * and remap all I/O addresses that are relevant to this HW revision.
-+ */
-+static int msm_apm_ctrl_devm_ioremap(struct platform_device *pdev,
-+ struct msm_apm_ctrl_dev *ctrl)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct resource *res;
-+ static const char *res_name[SPM_EVENT_NUM] = {
-+ "apc0-l2-spm",
-+ "apc1-l2-spm",
-+ "apc0-cpu0-spm",
-+ "apc0-cpu1-spm",
-+ "apc1-cpu0-spm",
-+ "apc1-cpu1-spm"
-+ };
-+ int i, ret = 0;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pm-apcc-glb");
-+ if (!res) {
-+ dev_err(dev, "Missing PM APCC Global register physical address");
-+ return -EINVAL;
-+ }
-+ ctrl->reg_base = devm_ioremap(dev, res->start, resource_size(res));
-+ if (!ctrl->reg_base) {
-+ dev_err(dev, "Failed to map PM APCC Global registers\n");
-+ return -ENOMEM;
-+ }
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apcs-csr");
-+ if (!res) {
-+ dev_err(dev, "Missing APCS CSR physical base address");
-+ return -EINVAL;
-+ }
-+ ctrl->apcs_csr_base = devm_ioremap(dev, res->start, resource_size(res));
-+ if (!ctrl->apcs_csr_base) {
-+ dev_err(dev, "Failed to map APCS CSR registers\n");
-+ return -ENOMEM;
-+ }
-+
-+ ctrl->version = readl_relaxed(ctrl->apcs_csr_base + APCS_VERSION);
-+
-+ if (ctrl->version >= HMSS_VERSION_1P2)
-+ return ret;
-+
-+ ctrl->apcs_spm_events_addr = devm_kzalloc(&pdev->dev,
-+ SPM_EVENT_NUM
-+ * sizeof(void __iomem *),
-+ GFP_KERNEL);
-+ if (!ctrl->apcs_spm_events_addr) {
-+ dev_err(dev, "Failed to allocate memory for APCS SPM event registers\n");
-+ return -ENOMEM;
-+ }
-+
-+ for (i = 0; i < SPM_EVENT_NUM; i++) {
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ res_name[i]);
-+ if (!res) {
-+ dev_err(dev, "Missing address for %s\n", res_name[i]);
-+ ret = -EINVAL;
-+ goto free_events;
-+ }
-+
-+ ctrl->apcs_spm_events_addr[i] = devm_ioremap(dev, res->start,
-+ resource_size(res));
-+ if (!ctrl->apcs_spm_events_addr[i]) {
-+ dev_err(dev, "Failed to map %s\n", res_name[i]);
-+ ret = -ENOMEM;
-+ goto free_events;
-+ }
-+
-+ dev_dbg(dev, "%s event phys: %pa virt:0x%p\n", res_name[i],
-+ &res->start, ctrl->apcs_spm_events_addr[i]);
-+ }
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "apc0-pll-ctl");
-+ if (!res) {
-+ dev_err(dev, "Missing APC0 PLL CTL physical address\n");
-+ ret = -EINVAL;
-+ goto free_events;
-+ }
-+
-+ ctrl->apc0_pll_ctl_addr = devm_ioremap(dev,
-+ res->start,
-+ resource_size(res));
-+ if (!ctrl->apc0_pll_ctl_addr) {
-+ dev_err(dev, "Failed to map APC0 PLL CTL register\n");
-+ ret = -ENOMEM;
-+ goto free_events;
-+ }
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "apc1-pll-ctl");
-+ if (!res) {
-+ dev_err(dev, "Missing APC1 PLL CTL physical address\n");
-+ ret = -EINVAL;
-+ goto free_events;
-+ }
-+
-+ ctrl->apc1_pll_ctl_addr = devm_ioremap(dev,
-+ res->start,
-+ resource_size(res));
-+ if (!ctrl->apc1_pll_ctl_addr) {
-+ dev_err(dev, "Failed to map APC1 PLL CTL register\n");
-+ ret = -ENOMEM;
-+ goto free_events;
-+ }
-+
-+ return ret;
-+
-+free_events:
-+ devm_kfree(dev, ctrl->apcs_spm_events_addr);
-+ return ret;
-+}
-+
-+/* 8953 register offset definition */
-+#define MSM8953_APM_DLY_CNTR 0x2ac
-+
-+/* Register field shift definitions */
-+#define APM_CTL_SEL_SWITCH_DLY_SHIFT 0
-+#define APM_CTL_RESUME_CLK_DLY_SHIFT 8
-+#define APM_CTL_HALT_CLK_DLY_SHIFT 16
-+#define APM_CTL_POST_HALT_DLY_SHIFT 24
-+
-+/* Register field mask definitions */
-+#define APM_CTL_SEL_SWITCH_DLY_MASK GENMASK(7, 0)
-+#define APM_CTL_RESUME_CLK_DLY_MASK GENMASK(15, 8)
-+#define APM_CTL_HALT_CLK_DLY_MASK GENMASK(23, 16)
-+#define APM_CTL_POST_HALT_DLY_MASK GENMASK(31, 24)
-+
-+/*
-+ * Get the resources associated with the msm8953 APM controller from
-+ * device tree, remap all I/O addresses, and program the initial
-+ * register configuration required for the 8953 APM controller device.
-+ */
-+static int msm8953_apm_ctrl_init(struct platform_device *pdev,
-+ struct msm_apm_ctrl_dev *ctrl)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct resource *res;
-+ u32 delay_counter, val = 0, regval = 0;
-+ int rc = 0;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pm-apcc-glb");
-+ if (!res) {
-+ dev_err(dev, "Missing PM APCC Global register physical address\n");
-+ return -ENODEV;
-+ }
-+ ctrl->reg_base = devm_ioremap(dev, res->start, resource_size(res));
-+ if (!ctrl->reg_base) {
-+ dev_err(dev, "Failed to map PM APCC Global registers\n");
-+ return -ENOMEM;
-+ }
-+
-+ /*
-+ * Initial APM register configuration required before starting
-+ * APM HW controller.
-+ */
-+ regval = readl_relaxed(ctrl->reg_base + MSM8953_APM_DLY_CNTR);
-+ val = regval;
-+
-+ if (of_find_property(dev->of_node, "qcom,apm-post-halt-delay", NULL)) {
-+ rc = of_property_read_u32(dev->of_node,
-+ "qcom,apm-post-halt-delay", &delay_counter);
-+ if (rc < 0) {
-+ dev_err(dev, "apm-post-halt-delay read failed, rc = %d",
-+ rc);
-+ return rc;
-+ }
-+
-+ val &= ~APM_CTL_POST_HALT_DLY_MASK;
-+ val |= (delay_counter << APM_CTL_POST_HALT_DLY_SHIFT)
-+ & APM_CTL_POST_HALT_DLY_MASK;
-+ }
-+
-+ if (of_find_property(dev->of_node, "qcom,apm-halt-clk-delay", NULL)) {
-+ rc = of_property_read_u32(dev->of_node,
-+ "qcom,apm-halt-clk-delay", &delay_counter);
-+ if (rc < 0) {
-+ dev_err(dev, "apm-halt-clk-delay read failed, rc = %d",
-+ rc);
-+ return rc;
-+ }
-+
-+ val &= ~APM_CTL_HALT_CLK_DLY_MASK;
-+ val |= (delay_counter << APM_CTL_HALT_CLK_DLY_SHIFT)
-+ & APM_CTL_HALT_CLK_DLY_MASK;
-+ }
-+
-+ if (of_find_property(dev->of_node, "qcom,apm-resume-clk-delay", NULL)) {
-+ rc = of_property_read_u32(dev->of_node,
-+ "qcom,apm-resume-clk-delay", &delay_counter);
-+ if (rc < 0) {
-+ dev_err(dev, "apm-resume-clk-delay read failed, rc = %d",
-+ rc);
-+ return rc;
-+ }
-+
-+ val &= ~APM_CTL_RESUME_CLK_DLY_MASK;
-+ val |= (delay_counter << APM_CTL_RESUME_CLK_DLY_SHIFT)
-+ & APM_CTL_RESUME_CLK_DLY_MASK;
-+ }
-+
-+ if (of_find_property(dev->of_node, "qcom,apm-sel-switch-delay", NULL)) {
-+ rc = of_property_read_u32(dev->of_node,
-+ "qcom,apm-sel-switch-delay", &delay_counter);
-+ if (rc < 0) {
-+ dev_err(dev, "apm-sel-switch-delay read failed, rc = %d",
-+ rc);
-+ return rc;
-+ }
-+
-+ val &= ~APM_CTL_SEL_SWITCH_DLY_MASK;
-+ val |= (delay_counter << APM_CTL_SEL_SWITCH_DLY_SHIFT)
-+ & APM_CTL_SEL_SWITCH_DLY_MASK;
-+ }
-+
-+ if (val != regval) {
-+ writel_relaxed(val, ctrl->reg_base + MSM8953_APM_DLY_CNTR);
-+ /* make sure write completes before return */
-+ mb();
-+ }
-+
-+ return rc;
-+}
-+
-+static int msm8996_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev)
-+{
-+ int i, timeout = MSM_APM_SWITCH_TIMEOUT_US;
-+ u32 regval;
-+ int ret = 0;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ctrl_dev->lock, flags);
-+
-+ /* Perform revision-specific programming steps */
-+ if (ctrl_dev->version < HMSS_VERSION_1P2) {
-+ /* Clear SPM events */
-+ for (i = 0; i < SPM_EVENT_NUM; i++)
-+ writel_relaxed(SPM_EVENT_CLEAR_VAL,
-+ ctrl_dev->apcs_spm_events_addr[i]);
-+
-+ udelay(SPM_WAKEUP_DELAY_US);
-+
-+ /* Switch APC/CBF to GPLL0 clock */
-+ writel_relaxed(APCS_GFMUXA_SEL_VAL,
-+ ctrl_dev->apcs_csr_base + APCS_SPARE);
-+ ndelay(200);
-+ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL,
-+ ctrl_dev->apc0_pll_ctl_addr);
-+ ndelay(200);
-+ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL,
-+ ctrl_dev->apc1_pll_ctl_addr);
-+
-+ /* Ensure writes complete before proceeding */
-+ mb();
-+ }
-+
-+ /* Switch arrays to MX supply and wait for its completion */
-+ writel_relaxed(MSM_APM_MX_MODE_VAL, ctrl_dev->reg_base +
-+ APCC_APM_MODE);
-+
-+ /* Ensure write above completes before delaying */
-+ mb();
-+
-+ while (timeout > 0) {
-+ regval = readl_relaxed(ctrl_dev->reg_base + APCC_APM_CTL_STS);
-+ if ((regval & MSM_APM_CTL_STS_MASK) ==
-+ MSM_APM_MX_DONE_VAL)
-+ break;
-+
-+ udelay(1);
-+ timeout--;
-+ }
-+
-+ if (timeout == 0) {
-+ ret = -ETIMEDOUT;
-+ dev_err(ctrl_dev->dev, "APCC to MX APM switch timed out. APCC_APM_CTL_STS=0x%x\n",
-+ regval);
-+ }
-+
-+ /* Perform revision-specific programming steps */
-+ if (ctrl_dev->version < HMSS_VERSION_1P2) {
-+ /* Switch APC/CBF clocks to original source */
-+ writel_relaxed(APCS_GFMUXA_DESEL_VAL,
-+ ctrl_dev->apcs_csr_base + APCS_SPARE);
-+ ndelay(200);
-+ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL,
-+ ctrl_dev->apc0_pll_ctl_addr);
-+ ndelay(200);
-+ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL,
-+ ctrl_dev->apc1_pll_ctl_addr);
-+
-+ /* Complete clock source switch before SPM event sequence */
-+ mb();
-+
-+ /* Set SPM events */
-+ for (i = 0; i < SPM_EVENT_NUM; i++)
-+ writel_relaxed(SPM_EVENT_SET_VAL,
-+ ctrl_dev->apcs_spm_events_addr[i]);
-+ }
-+
-+ if (!ret) {
-+ ctrl_dev->supply = MSM_APM_SUPPLY_MX;
-+ dev_dbg(ctrl_dev->dev, "APM supply switched to MX\n");
-+ }
-+
-+ spin_unlock_irqrestore(&ctrl_dev->lock, flags);
-+
-+ return ret;
-+}
-+
-+static int msm8996_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev)
-+{
-+ int i, timeout = MSM_APM_SWITCH_TIMEOUT_US;
-+ u32 regval;
-+ int ret = 0;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ctrl_dev->lock, flags);
-+
-+ /* Perform revision-specific programming steps */
-+ if (ctrl_dev->version < HMSS_VERSION_1P2) {
-+ /* Clear SPM events */
-+ for (i = 0; i < SPM_EVENT_NUM; i++)
-+ writel_relaxed(SPM_EVENT_CLEAR_VAL,
-+ ctrl_dev->apcs_spm_events_addr[i]);
-+
-+ udelay(SPM_WAKEUP_DELAY_US);
-+
-+ /* Switch APC/CBF to GPLL0 clock */
-+ writel_relaxed(APCS_GFMUXA_SEL_VAL,
-+ ctrl_dev->apcs_csr_base + APCS_SPARE);
-+ ndelay(200);
-+ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL,
-+ ctrl_dev->apc0_pll_ctl_addr);
-+ ndelay(200);
-+ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL,
-+ ctrl_dev->apc1_pll_ctl_addr);
-+
-+ /* Ensure previous writes complete before proceeding */
-+ mb();
-+ }
-+
-+ /* Switch arrays to APCC supply and wait for its completion */
-+ writel_relaxed(MSM_APM_APCC_MODE_VAL, ctrl_dev->reg_base +
-+ APCC_APM_MODE);
-+
-+ /* Ensure write above completes before delaying */
-+ mb();
-+
-+ while (timeout > 0) {
-+ regval = readl_relaxed(ctrl_dev->reg_base + APCC_APM_CTL_STS);
-+ if ((regval & MSM_APM_CTL_STS_MASK) ==
-+ MSM_APM_APCC_DONE_VAL)
-+ break;
-+
-+ udelay(1);
-+ timeout--;
-+ }
-+
-+ if (timeout == 0) {
-+ ret = -ETIMEDOUT;
-+ dev_err(ctrl_dev->dev, "MX to APCC APM switch timed out. APCC_APM_CTL_STS=0x%x\n",
-+ regval);
-+ }
-+
-+ /* Perform revision-specific programming steps */
-+ if (ctrl_dev->version < HMSS_VERSION_1P2) {
-+ /* Set SPM events */
-+ for (i = 0; i < SPM_EVENT_NUM; i++)
-+ writel_relaxed(SPM_EVENT_SET_VAL,
-+ ctrl_dev->apcs_spm_events_addr[i]);
-+
-+ /* Complete SPM event sequence before clock source switch */
-+ mb();
-+
-+ /* Switch APC/CBF clocks to original source */
-+ writel_relaxed(APCS_GFMUXA_DESEL_VAL,
-+ ctrl_dev->apcs_csr_base + APCS_SPARE);
-+ ndelay(200);
-+ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL,
-+ ctrl_dev->apc0_pll_ctl_addr);
-+ ndelay(200);
-+ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL,
-+ ctrl_dev->apc1_pll_ctl_addr);
-+ }
-+
-+ if (!ret) {
-+ ctrl_dev->supply = MSM_APM_SUPPLY_APCC;
-+ dev_dbg(ctrl_dev->dev, "APM supply switched to APCC\n");
-+ }
-+
-+ spin_unlock_irqrestore(&ctrl_dev->lock, flags);
-+
-+ return ret;
-+}
-+
-+/* 8953 register value definitions */
-+#define MSM8953_APM_MX_MODE_VAL 0x00
-+#define MSM8953_APM_APCC_MODE_VAL 0x02
-+#define MSM8953_APM_MX_DONE_VAL 0x00
-+#define MSM8953_APM_APCC_DONE_VAL 0x03
-+
-+/* 8953 register offset definitions */
-+#define MSM8953_APCC_APM_MODE 0x000002a8
-+#define MSM8953_APCC_APM_CTL_STS 0x000002b0
-+
-+/* 8953 constants */
-+#define MSM8953_APM_SWITCH_TIMEOUT_US 500
-+
-+/* Register bit mask definitions */
-+#define MSM8953_APM_CTL_STS_MASK 0x1f
-+
-+static int msm8953_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev)
-+{
-+ int timeout = MSM8953_APM_SWITCH_TIMEOUT_US;
-+ u32 regval;
-+ int ret = 0;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ctrl_dev->lock, flags);
-+
-+ /* Switch arrays to MX supply and wait for its completion */
-+ writel_relaxed(MSM8953_APM_MX_MODE_VAL, ctrl_dev->reg_base +
-+ MSM8953_APCC_APM_MODE);
-+
-+ /* Ensure write above completes before delaying */
-+ mb();
-+
-+ while (timeout > 0) {
-+ regval = readl_relaxed(ctrl_dev->reg_base +
-+ MSM8953_APCC_APM_CTL_STS);
-+ if ((regval & MSM8953_APM_CTL_STS_MASK) ==
-+ MSM8953_APM_MX_DONE_VAL)
-+ break;
-+
-+ udelay(1);
-+ timeout--;
-+ }
-+
-+ if (timeout == 0) {
-+ ret = -ETIMEDOUT;
-+ dev_err(ctrl_dev->dev, "APCC to MX APM switch timed out. APCC_APM_CTL_STS=0x%x\n",
-+ regval);
-+ } else {
-+ ctrl_dev->supply = MSM_APM_SUPPLY_MX;
-+ dev_dbg(ctrl_dev->dev, "APM supply switched to MX\n");
-+ }
-+
-+ spin_unlock_irqrestore(&ctrl_dev->lock, flags);
-+
-+ return ret;
-+}
-+
-+static int msm8953_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev)
-+{
-+ int timeout = MSM8953_APM_SWITCH_TIMEOUT_US;
-+ u32 regval;
-+ int ret = 0;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ctrl_dev->lock, flags);
-+
-+ /* Switch arrays to APCC supply and wait for its completion */
-+ writel_relaxed(MSM8953_APM_APCC_MODE_VAL, ctrl_dev->reg_base +
-+ MSM8953_APCC_APM_MODE);
-+
-+ /* Ensure write above completes before delaying */
-+ mb();
-+
-+ while (timeout > 0) {
-+ regval = readl_relaxed(ctrl_dev->reg_base +
-+ MSM8953_APCC_APM_CTL_STS);
-+ if ((regval & MSM8953_APM_CTL_STS_MASK) ==
-+ MSM8953_APM_APCC_DONE_VAL)
-+ break;
-+
-+ udelay(1);
-+ timeout--;
-+ }
-+
-+ if (timeout == 0) {
-+ ret = -ETIMEDOUT;
-+ dev_err(ctrl_dev->dev, "MX to APCC APM switch timed out. APCC_APM_CTL_STS=0x%x\n",
-+ regval);
-+ } else {
-+ ctrl_dev->supply = MSM_APM_SUPPLY_APCC;
-+ dev_dbg(ctrl_dev->dev, "APM supply switched to APCC\n");
-+ }
-+
-+ spin_unlock_irqrestore(&ctrl_dev->lock, flags);
-+
-+ return ret;
-+}
-+
-+static int msm_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev)
-+{
-+ int ret = 0;
-+
-+ switch (ctrl_dev->msm_id) {
-+ case MSM8996_ID:
-+ ret = msm8996_apm_switch_to_mx(ctrl_dev);
-+ break;
-+ case MSM8953_ID:
-+ case IPQ807x_ID:
-+ ret = msm8953_apm_switch_to_mx(ctrl_dev);
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static int msm_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev)
-+{
-+ int ret = 0;
-+
-+ switch (ctrl_dev->msm_id) {
-+ case MSM8996_ID:
-+ ret = msm8996_apm_switch_to_apcc(ctrl_dev);
-+ break;
-+ case MSM8953_ID:
-+ case IPQ807x_ID:
-+ ret = msm8953_apm_switch_to_apcc(ctrl_dev);
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+/**
-+ * msm_apm_get_supply() - Returns the supply that is currently
-+ * powering the memory arrays
-+ * @ctrl_dev: Pointer to an MSM APM controller device
-+ *
-+ * Returns the supply currently selected by the APM.
-+ */
-+int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev)
-+{
-+ return ctrl_dev->supply;
-+}
-+EXPORT_SYMBOL(msm_apm_get_supply);
-+
-+/**
-+ * msm_apm_set_supply() - Perform the necessary steps to switch the voltage
-+ * source of the memory arrays to a given supply
-+ * @ctrl_dev: Pointer to an MSM APM controller device
-+ * @supply: Power rail to use as supply for the memory
-+ * arrays
-+ *
-+ * Returns 0 on success, -ETIMEDOUT on APM switch timeout, or -EPERM if
-+ * the supply is not supported.
-+ */
-+int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev,
-+ enum msm_apm_supply supply)
-+{
-+ int ret;
-+
-+ switch (supply) {
-+ case MSM_APM_SUPPLY_APCC:
-+ ret = msm_apm_switch_to_apcc(ctrl_dev);
-+ break;
-+ case MSM_APM_SUPPLY_MX:
-+ ret = msm_apm_switch_to_mx(ctrl_dev);
-+ break;
-+ default:
-+ ret = -EPERM;
-+ break;
-+ }
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL(msm_apm_set_supply);
-+
-+/**
-+ * msm_apm_ctrl_dev_get() - get a handle to the MSM APM controller linked to
-+ * the device in device tree
-+ * @dev: Pointer to the device
-+ *
-+ * The device must specify "qcom,apm-ctrl" property in its device tree
-+ * node which points to an MSM APM controller device node.
-+ *
-+ * Returns an MSM APM controller handle if successful or ERR_PTR on any error.
-+ * If the APM controller device hasn't probed yet, ERR_PTR(-EPROBE_DEFER) is
-+ * returned.
-+ */
-+struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev)
-+{
-+ struct msm_apm_ctrl_dev *ctrl_dev = NULL;
-+ struct msm_apm_ctrl_dev *dev_found = ERR_PTR(-EPROBE_DEFER);
-+ struct device_node *ctrl_node;
-+
-+ if (!dev || !dev->of_node) {
-+ pr_err("Invalid device node\n");
-+ return ERR_PTR(-EINVAL);
-+ }
-+
-+ ctrl_node = of_parse_phandle(dev->of_node, "qcom,apm-ctrl", 0);
-+ if (!ctrl_node) {
-+ pr_err("Could not find qcom,apm-ctrl property in %s\n",
-+ dev->of_node->full_name);
-+ return ERR_PTR(-ENXIO);
-+ }
-+
-+ mutex_lock(&apm_ctrl_list_mutex);
-+ list_for_each_entry(ctrl_dev, &apm_ctrl_list, list) {
-+ if (ctrl_dev->dev && ctrl_dev->dev->of_node == ctrl_node) {
-+ dev_found = ctrl_dev;
-+ break;
-+ }
-+ }
-+ mutex_unlock(&apm_ctrl_list_mutex);
-+
-+ of_node_put(ctrl_node);
-+ return dev_found;
-+}
-+EXPORT_SYMBOL(msm_apm_ctrl_dev_get);
-+
-+#if defined(CONFIG_DEBUG_FS)
-+
-+static int apm_supply_dbg_open(struct inode *inode, struct file *filep)
-+{
-+ filep->private_data = inode->i_private;
-+
-+ return 0;
-+}
-+
-+static ssize_t apm_supply_dbg_read(struct file *filep, char __user *ubuf,
-+ size_t count, loff_t *ppos)
-+{
-+ struct msm_apm_ctrl_dev *ctrl_dev = filep->private_data;
-+ char buf[10];
-+ int len;
-+
-+ if (!ctrl_dev) {
-+ pr_err("invalid apm ctrl handle\n");
-+ return -ENODEV;
-+ }
-+
-+ if (ctrl_dev->supply == MSM_APM_SUPPLY_APCC)
-+ len = snprintf(buf, sizeof(buf), "APCC\n");
-+ else if (ctrl_dev->supply == MSM_APM_SUPPLY_MX)
-+ len = snprintf(buf, sizeof(buf), "MX\n");
-+ else
-+ len = snprintf(buf, sizeof(buf), "ERR\n");
-+
-+ return simple_read_from_buffer(ubuf, count, ppos, buf, len);
-+}
-+
-+static const struct file_operations apm_supply_fops = {
-+ .open = apm_supply_dbg_open,
-+ .read = apm_supply_dbg_read,
-+};
-+
-+static void apm_debugfs_base_init(void)
-+{
-+ apm_debugfs_base = debugfs_create_dir("msm-apm", NULL);
-+
-+ if (IS_ERR_OR_NULL(apm_debugfs_base))
-+ pr_err("msm-apm debugfs base directory creation failed\n");
-+}
-+
-+static void apm_debugfs_init(struct msm_apm_ctrl_dev *ctrl_dev)
-+{
-+ struct dentry *temp;
-+
-+ if (IS_ERR_OR_NULL(apm_debugfs_base)) {
-+ pr_err("Base directory missing, cannot create apm debugfs nodes\n");
-+ return;
-+ }
-+
-+ ctrl_dev->debugfs = debugfs_create_dir(dev_name(ctrl_dev->dev),
-+ apm_debugfs_base);
-+ if (IS_ERR_OR_NULL(ctrl_dev->debugfs)) {
-+ pr_err("%s debugfs directory creation failed\n",
-+ dev_name(ctrl_dev->dev));
-+ return;
-+ }
-+
-+ temp = debugfs_create_file("supply", S_IRUGO, ctrl_dev->debugfs,
-+ ctrl_dev, &apm_supply_fops);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ pr_err("supply mode creation failed\n");
-+ return;
-+ }
-+}
-+
-+static void apm_debugfs_deinit(struct msm_apm_ctrl_dev *ctrl_dev)
-+{
-+ if (!IS_ERR_OR_NULL(ctrl_dev->debugfs))
-+ debugfs_remove_recursive(ctrl_dev->debugfs);
-+}
-+
-+static void apm_debugfs_base_remove(void)
-+{
-+ debugfs_remove_recursive(apm_debugfs_base);
-+}
-+#else
-+
-+static void apm_debugfs_base_init(void)
-+{}
-+
-+static void apm_debugfs_init(struct msm_apm_ctrl_dev *ctrl_dev)
-+{}
-+
-+static void apm_debugfs_deinit(struct msm_apm_ctrl_dev *ctrl_dev)
-+{}
-+
-+static void apm_debugfs_base_remove(void)
-+{}
-+
-+#endif
-+
-+static struct of_device_id msm_apm_match_table[] = {
-+ {
-+ .compatible = "qcom,msm-apm",
-+ .data = (void *)(uintptr_t)MSM8996_ID,
-+ },
-+ {
-+ .compatible = "qcom,msm8953-apm",
-+ .data = (void *)(uintptr_t)MSM8953_ID,
-+ },
-+ {
-+ .compatible = "qcom,ipq807x-apm",
-+ .data = (void *)(uintptr_t)IPQ807x_ID,
-+ },
-+ {}
-+};
-+
-+static int msm_apm_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct msm_apm_ctrl_dev *ctrl;
-+ const struct of_device_id *match;
-+ int ret = 0;
-+
-+ dev_dbg(dev, "probing MSM Array Power Mux driver\n");
-+
-+ if (!dev->of_node) {
-+ dev_err(dev, "Device tree node is missing\n");
-+ return -ENODEV;
-+ }
-+
-+ match = of_match_device(msm_apm_match_table, dev);
-+ if (!match)
-+ return -ENODEV;
-+
-+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
-+ if (!ctrl) {
-+ dev_err(dev, "MSM APM controller memory allocation failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ INIT_LIST_HEAD(&ctrl->list);
-+ spin_lock_init(&ctrl->lock);
-+ ctrl->dev = dev;
-+ ctrl->msm_id = (uintptr_t)match->data;
-+ platform_set_drvdata(pdev, ctrl);
-+
-+ switch (ctrl->msm_id) {
-+ case MSM8996_ID:
-+ ret = msm_apm_ctrl_devm_ioremap(pdev, ctrl);
-+ if (ret) {
-+ dev_err(dev, "Failed to add APM controller device\n");
-+ return ret;
-+ }
-+ break;
-+ case MSM8953_ID:
-+ case IPQ807x_ID:
-+ ret = msm8953_apm_ctrl_init(pdev, ctrl);
-+ if (ret) {
-+ dev_err(dev, "Failed to initialize APM controller device: ret=%d\n",
-+ ret);
-+ return ret;
-+ }
-+ break;
-+ default:
-+ dev_err(dev, "unable to add APM controller device for msm_id:%d\n",
-+ ctrl->msm_id);
-+ return -ENODEV;
-+ }
-+
-+ apm_debugfs_init(ctrl);
-+ mutex_lock(&apm_ctrl_list_mutex);
-+ list_add_tail(&ctrl->list, &apm_ctrl_list);
-+ mutex_unlock(&apm_ctrl_list_mutex);
-+
-+ dev_dbg(dev, "MSM Array Power Mux driver probe successful");
-+
-+ return ret;
-+}
-+
-+static int msm_apm_remove(struct platform_device *pdev)
-+{
-+ struct msm_apm_ctrl_dev *ctrl_dev;
-+
-+ ctrl_dev = platform_get_drvdata(pdev);
-+ if (ctrl_dev) {
-+ mutex_lock(&apm_ctrl_list_mutex);
-+ list_del(&ctrl_dev->list);
-+ mutex_unlock(&apm_ctrl_list_mutex);
-+ apm_debugfs_deinit(ctrl_dev);
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver msm_apm_driver = {
-+ .driver = {
-+ .name = MSM_APM_DRIVER_NAME,
-+ .of_match_table = msm_apm_match_table,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = msm_apm_probe,
-+ .remove = msm_apm_remove,
-+};
-+
-+static int __init msm_apm_init(void)
-+{
-+ apm_debugfs_base_init();
-+ return platform_driver_register(&msm_apm_driver);
-+}
-+
-+static void __exit msm_apm_exit(void)
-+{
-+ platform_driver_unregister(&msm_apm_driver);
-+ apm_debugfs_base_remove();
-+}
-+
-+arch_initcall(msm_apm_init);
-+module_exit(msm_apm_exit);
-+
-+MODULE_DESCRIPTION("MSM Array Power Mux driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/include/linux/power/qcom/apm.h
-@@ -0,0 +1,48 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __LINUX_POWER_QCOM_APM_H__
-+#define __LINUX_POWER_QCOM_APM_H__
-+
-+#include <linux/device.h>
-+#include <linux/err.h>
-+
-+/**
-+ * enum msm_apm_supply - supported power rails to supply memory arrays
-+ * %MSM_APM_SUPPLY_APCC: to enable selection of VDD_APCC rail as supply
-+ * %MSM_APM_SUPPLY_MX: to enable selection of VDD_MX rail as supply
-+ */
-+enum msm_apm_supply {
-+ MSM_APM_SUPPLY_APCC,
-+ MSM_APM_SUPPLY_MX,
-+};
-+
-+/* Handle used to identify an APM controller device */
-+struct msm_apm_ctrl_dev;
-+
-+#ifdef CONFIG_QCOM_APM
-+struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev);
-+int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev,
-+ enum msm_apm_supply supply);
-+int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev);
-+
-+#else
-+static inline struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev)
-+{ return ERR_PTR(-EPERM); }
-+static inline int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev,
-+ enum msm_apm_supply supply)
-+{ return -EPERM; }
-+static inline int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev)
-+{ return -EPERM; }
-+#endif
-+#endif
diff --git a/target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch b/target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch
deleted file mode 100644
index 3deadea139..0000000000
--- a/target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch
+++ /dev/null
@@ -1,12147 +0,0 @@
-From 303fb163bb86f04432c93325ff8b9638c9e50641 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 11 Apr 2022 14:35:36 +0200
-Subject: [PATCH] regulator: add Qualcomm CPR regulators
-
-Add Qualcomm CPR driver, which allows using the CPR HW to calculate the
-correct OPP point voltage dynamically based on the system load.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/regulator/Kconfig | 33 +
- drivers/regulator/Makefile | 3 +
- drivers/regulator/cpr3-npu-regulator.c | 695 +++
- drivers/regulator/cpr3-regulator.c | 5112 +++++++++++++++++++++++
- drivers/regulator/cpr3-regulator.h | 1211 ++++++
- drivers/regulator/cpr3-util.c | 2750 ++++++++++++
- drivers/regulator/cpr4-apss-regulator.c | 1819 ++++++++
- include/soc/qcom/socinfo.h | 463 ++
- 8 files changed, 12086 insertions(+)
- create mode 100644 drivers/regulator/cpr3-npu-regulator.c
- create mode 100644 drivers/regulator/cpr3-regulator.c
- create mode 100644 drivers/regulator/cpr3-regulator.h
- create mode 100644 drivers/regulator/cpr3-util.c
- create mode 100644 drivers/regulator/cpr4-apss-regulator.c
- create mode 100644 include/soc/qcom/socinfo.h
-
---- a/drivers/regulator/Kconfig
-+++ b/drivers/regulator/Kconfig
-@@ -1423,5 +1423,38 @@ config REGULATOR_QCOM_LABIBB
- boost regulator and IBB can be used as a negative boost regulator
- for LCD display panel.
-
-+config REGULATOR_CPR3
-+ bool "QCOM CPR3 regulator core support"
-+ help
-+ This driver supports Core Power Reduction (CPR) version 3 controllers
-+ which are used by some Qualcomm Technologies, Inc. SoCs to
-+ manage important voltage regulators. CPR3 controllers are capable of
-+ monitoring several ring oscillator sensing loops simultaneously. The
-+ CPR3 controller informs software when the silicon conditions require
-+ the supply voltage to be increased or decreased. On certain supply
-+ rails, the CPR3 controller is able to propagate the voltage increase
-+ or decrease requests all the way to the PMIC without software
-+ involvement.
-+
-+config REGULATOR_CPR3_NPU
-+ bool "QCOM CPR3 regulator for NPU"
-+ depends on OF && REGULATOR_CPR3
-+ help
-+ This driver supports Qualcomm Technologies, Inc. NPU CPR3
-+ regulator Which will always operate in open loop.
-+
-+config REGULATOR_CPR4_APSS
-+ bool "QCOM CPR4 regulator for APSS"
-+ depends on OF && REGULATOR_CPR3
-+ help
-+ This driver supports Qualcomm Technologies, Inc. APSS application
-+ processor specific features including memory array power mux (APM)
-+ switching, one CPR4 thread which monitor the two APSS clusters that
-+ are both powered by a shared supply, hardware closed-loop auto
-+ voltage stepping, voltage adjustments based on online core count,
-+ voltage adjustments based on temperature readings, and voltage
-+ adjustments for performance boost mode. This driver reads both initial
-+ voltage and CPR target quotient values out of hardware fuses.
-+
- endif
-
---- a/drivers/regulator/Makefile
-+++ b/drivers/regulator/Makefile
-@@ -105,6 +105,9 @@ obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qco
- obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
- obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
- obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
-+obj-$(CONFIG_REGULATOR_CPR3) += cpr3-regulator.o cpr3-util.o
-+obj-$(CONFIG_REGULATOR_CPR3_NPU) += cpr3-npu-regulator.o
-+obj-$(CONFIG_REGULATOR_CPR4_APSS) += cpr4-apss-regulator.o
- obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
- obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o
- obj-$(CONFIG_REGULATOR_PF8X00) += pf8x00-regulator.o
---- /dev/null
-+++ b/drivers/regulator/cpr3-npu-regulator.c
-@@ -0,0 +1,695 @@
-+/*
-+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/slab.h>
-+#include <linux/thermal.h>
-+
-+#include "cpr3-regulator.h"
-+
-+#define IPQ807x_NPU_FUSE_CORNERS 2
-+#define IPQ817x_NPU_FUSE_CORNERS 1
-+#define IPQ807x_NPU_FUSE_STEP_VOLT 8000
-+#define IPQ807x_NPU_VOLTAGE_FUSE_SIZE 6
-+#define IPQ807x_NPU_CPR_CLOCK_RATE 19200000
-+
-+#define IPQ807x_NPU_CPR_TCSR_START 6
-+#define IPQ807x_NPU_CPR_TCSR_END 7
-+
-+#define NPU_TSENS 5
-+
-+u32 g_valid_npu_fuse_count = IPQ807x_NPU_FUSE_CORNERS;
-+/**
-+ * struct cpr3_ipq807x_npu_fuses - NPU specific fuse data for IPQ807x
-+ * @init_voltage: Initial (i.e. open-loop) voltage fuse parameter value
-+ * for each fuse corner (raw, not converted to a voltage)
-+ * This struct holds the values for all of the fuses read from memory.
-+ */
-+struct cpr3_ipq807x_npu_fuses {
-+ u64 init_voltage[IPQ807x_NPU_FUSE_CORNERS];
-+};
-+
-+/*
-+ * Constants which define the name of each fuse corner.
-+ */
-+enum cpr3_ipq807x_npu_fuse_corner {
-+ CPR3_IPQ807x_NPU_FUSE_CORNER_NOM = 0,
-+ CPR3_IPQ807x_NPU_FUSE_CORNER_TURBO = 1,
-+};
-+
-+static const char * const cpr3_ipq807x_npu_fuse_corner_name[] = {
-+ [CPR3_IPQ807x_NPU_FUSE_CORNER_NOM] = "NOM",
-+ [CPR3_IPQ807x_NPU_FUSE_CORNER_TURBO] = "TURBO",
-+};
-+
-+/*
-+ * IPQ807x NPU fuse parameter locations:
-+ *
-+ * Structs are organized with the following dimensions:
-+ * Outer: 0 to 1 for fuse corners from lowest to highest corner
-+ * Inner: large enough to hold the longest set of parameter segments which
-+ * fully defines a fuse parameter, +1 (for NULL termination).
-+ * Each segment corresponds to a contiguous group of bits from a
-+ * single fuse row. These segments are concatentated together in
-+ * order to form the full fuse parameter value. The segments for
-+ * a given parameter may correspond to different fuse rows.
-+ */
-+static struct cpr3_fuse_param
-+ipq807x_npu_init_voltage_param[IPQ807x_NPU_FUSE_CORNERS][2] = {
-+ {{73, 22, 27}, {} },
-+ {{73, 16, 21}, {} },
-+};
-+
-+/*
-+ * Open loop voltage fuse reference voltages in microvolts for IPQ807x
-+ */
-+static int
-+ipq807x_npu_fuse_ref_volt [IPQ807x_NPU_FUSE_CORNERS] = {
-+ 912000,
-+ 992000,
-+};
-+
-+/*
-+ * IPQ9574 (Few parameters are changed, remaining are same as IPQ807x)
-+ */
-+#define IPQ9574_NPU_FUSE_CORNERS 2
-+#define IPQ9574_NPU_FUSE_STEP_VOLT 10000
-+#define IPQ9574_NPU_CPR_CLOCK_RATE 24000000
-+
-+/*
-+ * fues parameters for IPQ9574
-+ */
-+static struct cpr3_fuse_param
-+ipq9574_npu_init_voltage_param[IPQ9574_NPU_FUSE_CORNERS][2] = {
-+ {{105, 12, 17}, {} },
-+ {{105, 6, 11}, {} },
-+};
-+
-+/*
-+ * Open loop voltage fuse reference voltages in microvolts for IPQ9574
-+ */
-+static int
-+ipq9574_npu_fuse_ref_volt [IPQ9574_NPU_FUSE_CORNERS] = {
-+ 862500,
-+ 987500,
-+};
-+
-+struct cpr3_controller *g_ctrl;
-+
-+void cpr3_npu_temp_notify(int sensor, int temp, int low_notif)
-+{
-+ u32 prev_sensor_state;
-+
-+ if (sensor != NPU_TSENS)
-+ return;
-+
-+ prev_sensor_state = g_ctrl->cur_sensor_state;
-+ if (low_notif)
-+ g_ctrl->cur_sensor_state |= BIT(sensor);
-+ else
-+ g_ctrl->cur_sensor_state &= ~BIT(sensor);
-+
-+ if (!prev_sensor_state && g_ctrl->cur_sensor_state)
-+ cpr3_handle_temp_open_loop_adjustment(g_ctrl, true);
-+ else if (prev_sensor_state && !g_ctrl->cur_sensor_state)
-+ cpr3_handle_temp_open_loop_adjustment(g_ctrl, false);
-+}
-+
-+/**
-+ * cpr3_ipq807x_npu_read_fuse_data() - load NPU specific fuse parameter values
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * This function allocates a cpr3_ipq807x_npu_fuses struct, fills it with
-+ * values read out of hardware fuses, and finally copies common fuse values
-+ * into the CPR3 regulator struct.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_ipq807x_npu_read_fuse_data(struct cpr3_regulator *vreg)
-+{
-+ void __iomem *base = vreg->thread->ctrl->fuse_base;
-+ struct cpr3_ipq807x_npu_fuses *fuse;
-+ int i, rc;
-+
-+ fuse = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*fuse), GFP_KERNEL);
-+ if (!fuse)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < g_valid_npu_fuse_count; i++) {
-+ rc = cpr3_read_fuse_param(base,
-+ vreg->cpr3_regulator_data->init_voltage_param[i],
-+ &fuse->init_voltage[i]);
-+ if (rc) {
-+ cpr3_err(vreg, "Unable to read fuse-corner %d initial voltage fuse, rc=%d\n",
-+ i, rc);
-+ return rc;
-+ }
-+ }
-+
-+ vreg->fuse_corner_count = g_valid_npu_fuse_count;
-+ vreg->platform_fuses = fuse;
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_npu_parse_corner_data() - parse NPU corner data from device tree
-+ * properties of the CPR3 regulator's device node
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_npu_parse_corner_data(struct cpr3_regulator *vreg)
-+{
-+ int rc;
-+
-+ rc = cpr3_parse_common_corner_data(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading corner data, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_ipq807x_npu_calculate_open_loop_voltages() - calculate the open-loop
-+ * voltage for each corner of a CPR3 regulator
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @temp_correction: Temperature based correction
-+ *
-+ * If open-loop voltage interpolation is allowed in device tree, then
-+ * this function calculates the open-loop voltage for a given corner using
-+ * linear interpolation. This interpolation is performed using the processor
-+ * frequencies of the lower and higher Fmax corners along with their fused
-+ * open-loop voltages.
-+ *
-+ * If open-loop voltage interpolation is not allowed, then this function uses
-+ * the Fmax fused open-loop voltage for all of the corners associated with a
-+ * given fuse corner.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_ipq807x_npu_calculate_open_loop_voltages(
-+ struct cpr3_regulator *vreg, bool temp_correction)
-+{
-+ struct cpr3_ipq807x_npu_fuses *fuse = vreg->platform_fuses;
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ int i, j, rc = 0;
-+ u64 freq_low, volt_low, freq_high, volt_high;
-+ int *fuse_volt;
-+ int *fmax_corner;
-+
-+ fuse_volt = kcalloc(vreg->fuse_corner_count, sizeof(*fuse_volt),
-+ GFP_KERNEL);
-+ fmax_corner = kcalloc(vreg->fuse_corner_count, sizeof(*fmax_corner),
-+ GFP_KERNEL);
-+ if (!fuse_volt || !fmax_corner) {
-+ rc = -ENOMEM;
-+ goto done;
-+ }
-+
-+ for (i = 0; i < vreg->fuse_corner_count; i++) {
-+ if (ctrl->cpr_global_setting == CPR_DISABLED)
-+ fuse_volt[i] = vreg->cpr3_regulator_data->fuse_ref_volt[i];
-+ else
-+ fuse_volt[i] = cpr3_convert_open_loop_voltage_fuse(
-+ vreg->cpr3_regulator_data->fuse_ref_volt[i],
-+ vreg->cpr3_regulator_data->fuse_step_volt,
-+ fuse->init_voltage[i],
-+ IPQ807x_NPU_VOLTAGE_FUSE_SIZE);
-+
-+ /* Log fused open-loop voltage values for debugging purposes. */
-+ cpr3_info(vreg, "fused %8s: open-loop=%7d uV\n",
-+ cpr3_ipq807x_npu_fuse_corner_name[i],
-+ fuse_volt[i]);
-+ }
-+
-+ rc = cpr3_determine_part_type(vreg,
-+ fuse_volt[CPR3_IPQ807x_NPU_FUSE_CORNER_TURBO]);
-+ if (rc) {
-+ cpr3_err(vreg,
-+ "fused part type detection failed failed, rc=%d\n", rc);
-+ goto done;
-+ }
-+
-+ rc = cpr3_adjust_fused_open_loop_voltages(vreg, fuse_volt);
-+ if (rc) {
-+ cpr3_err(vreg,
-+ "fused open-loop voltage adjustment failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ if (temp_correction) {
-+ rc = cpr3_determine_temp_base_open_loop_correction(vreg,
-+ fuse_volt);
-+ if (rc) {
-+ cpr3_err(vreg,
-+ "temp open-loop voltage adj. failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ for (i = 1; i < vreg->fuse_corner_count; i++) {
-+ if (fuse_volt[i] < fuse_volt[i - 1]) {
-+ cpr3_info(vreg,
-+ "fuse corner %d voltage=%d uV < fuse corner %d \
-+ voltage=%d uV; overriding: fuse corner %d \
-+ voltage=%d\n",
-+ i, fuse_volt[i], i - 1, fuse_volt[i - 1],
-+ i, fuse_volt[i - 1]);
-+ fuse_volt[i] = fuse_volt[i - 1];
-+ }
-+ }
-+
-+ /* Determine highest corner mapped to each fuse corner */
-+ j = vreg->fuse_corner_count - 1;
-+ for (i = vreg->corner_count - 1; i >= 0; i--) {
-+ if (vreg->corner[i].cpr_fuse_corner == j) {
-+ fmax_corner[j] = i;
-+ j--;
-+ }
-+ }
-+
-+ if (j >= 0) {
-+ cpr3_err(vreg, "invalid fuse corner mapping\n");
-+ rc = -EINVAL;
-+ goto done;
-+ }
-+
-+ /*
-+ * Interpolation is not possible for corners mapped to the lowest fuse
-+ * corner so use the fuse corner value directly.
-+ */
-+ for (i = 0; i <= fmax_corner[0]; i++)
-+ vreg->corner[i].open_loop_volt = fuse_volt[0];
-+
-+ /* Interpolate voltages for the higher fuse corners. */
-+ for (i = 1; i < vreg->fuse_corner_count; i++) {
-+ freq_low = vreg->corner[fmax_corner[i - 1]].proc_freq;
-+ volt_low = fuse_volt[i - 1];
-+ freq_high = vreg->corner[fmax_corner[i]].proc_freq;
-+ volt_high = fuse_volt[i];
-+
-+ for (j = fmax_corner[i - 1] + 1; j <= fmax_corner[i]; j++)
-+ vreg->corner[j].open_loop_volt = cpr3_interpolate(
-+ freq_low, volt_low, freq_high, volt_high,
-+ vreg->corner[j].proc_freq);
-+ }
-+
-+done:
-+ if (rc == 0) {
-+ cpr3_debug(vreg, "unadjusted per-corner open-loop voltages:\n");
-+ for (i = 0; i < vreg->corner_count; i++)
-+ cpr3_debug(vreg, "open-loop[%2d] = %d uV\n", i,
-+ vreg->corner[i].open_loop_volt);
-+
-+ rc = cpr3_adjust_open_loop_voltages(vreg);
-+ if (rc)
-+ cpr3_err(vreg,
-+ "open-loop voltage adjustment failed, rc=%d\n",
-+ rc);
-+ }
-+
-+ kfree(fuse_volt);
-+ kfree(fmax_corner);
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_npu_print_settings() - print out NPU CPR configuration settings into
-+ * the kernel log for debugging purposes
-+ * @vreg: Pointer to the CPR3 regulator
-+ */
-+static void cpr3_npu_print_settings(struct cpr3_regulator *vreg)
-+{
-+ struct cpr3_corner *corner;
-+ int i;
-+
-+ cpr3_debug(vreg,
-+ "Corner: Frequency (Hz), Fuse Corner, Floor (uV), \
-+ Open-Loop (uV), Ceiling (uV)\n");
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ corner = &vreg->corner[i];
-+ cpr3_debug(vreg, "%3d: %10u, %2d, %7d, %7d, %7d\n",
-+ i, corner->proc_freq, corner->cpr_fuse_corner,
-+ corner->floor_volt, corner->open_loop_volt,
-+ corner->ceiling_volt);
-+ }
-+
-+ if (vreg->thread->ctrl->apm)
-+ cpr3_debug(vreg, "APM threshold = %d uV, APM adjust = %d uV\n",
-+ vreg->thread->ctrl->apm_threshold_volt,
-+ vreg->thread->ctrl->apm_adj_volt);
-+}
-+
-+/**
-+ * cpr3_ipq807x_npu_calc_temp_based_ol_voltages() - Calculate the open loop
-+ * voltages based on temperature based correction margins
-+ * @vreg: Pointer to the CPR3 regulator
-+ */
-+
-+static int
-+cpr3_ipq807x_npu_calc_temp_based_ol_voltages(struct cpr3_regulator *vreg,
-+ bool temp_correction)
-+{
-+ int rc, i;
-+
-+ rc = cpr3_ipq807x_npu_calculate_open_loop_voltages(vreg,
-+ temp_correction);
-+ if (rc) {
-+ cpr3_err(vreg,
-+ "unable to calculate open-loop voltages, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_limit_open_loop_voltages(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to limit open-loop voltages, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ cpr3_open_loop_voltage_as_ceiling(vreg);
-+
-+ rc = cpr3_limit_floor_voltages(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to limit floor voltages, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ if (temp_correction)
-+ vreg->corner[i].cold_temp_open_loop_volt =
-+ vreg->corner[i].open_loop_volt;
-+ else
-+ vreg->corner[i].normal_temp_open_loop_volt =
-+ vreg->corner[i].open_loop_volt;
-+ }
-+
-+ cpr3_npu_print_settings(vreg);
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_npu_init_thread() - perform steps necessary to initialize the
-+ * configuration data for a CPR3 thread
-+ * @thread: Pointer to the CPR3 thread
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_npu_init_thread(struct cpr3_thread *thread)
-+{
-+ int rc;
-+
-+ rc = cpr3_parse_common_thread_data(thread);
-+ if (rc) {
-+ cpr3_err(thread->ctrl,
-+ "thread %u CPR thread data from DT- failed, rc=%d\n",
-+ thread->thread_id, rc);
-+ return rc;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_npu_init_regulator() - perform all steps necessary to initialize the
-+ * configuration data for a CPR3 regulator
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_npu_init_regulator(struct cpr3_regulator *vreg)
-+{
-+ struct cpr3_ipq807x_npu_fuses *fuse;
-+ int rc, cold_temp = 0;
-+ bool can_adj_cold_temp = cpr3_can_adjust_cold_temp(vreg);
-+
-+ rc = cpr3_ipq807x_npu_read_fuse_data(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to read CPR fuse data, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ fuse = vreg->platform_fuses;
-+
-+ rc = cpr3_npu_parse_corner_data(vreg);
-+ if (rc) {
-+ cpr3_err(vreg,
-+ "Cannot read CPR corner data from DT, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_mem_acc_init(vreg);
-+ if (rc) {
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(vreg,
-+ "Cannot initialize mem-acc regulator settings, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ if (can_adj_cold_temp) {
-+ rc = cpr3_ipq807x_npu_calc_temp_based_ol_voltages(vreg, true);
-+ if (rc) {
-+ cpr3_err(vreg,
-+ "unable to calculate open-loop voltages, rc=%d\n", rc);
-+ return rc;
-+ }
-+ }
-+
-+ rc = cpr3_ipq807x_npu_calc_temp_based_ol_voltages(vreg, false);
-+ if (rc) {
-+ cpr3_err(vreg,
-+ "unable to calculate open-loop voltages, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ if (can_adj_cold_temp) {
-+ cpr3_info(vreg,
-+ "Normal and Cold condition init done. Default to normal.\n");
-+
-+ rc = cpr3_get_cold_temp_threshold(vreg, &cold_temp);
-+ if (rc) {
-+ cpr3_err(vreg,
-+ "Get cold temperature threshold failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+ register_low_temp_notif(NPU_TSENS, cold_temp,
-+ cpr3_npu_temp_notify);
-+ }
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_npu_init_controller() - perform NPU CPR3 controller specific
-+ * initializations
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_npu_init_controller(struct cpr3_controller *ctrl)
-+{
-+ int rc;
-+
-+ rc = cpr3_parse_open_loop_common_ctrl_data(ctrl);
-+ if (rc) {
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "unable to parse common controller data, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ ctrl->ctrl_type = CPR_CTRL_TYPE_CPR3;
-+ ctrl->supports_hw_closed_loop = false;
-+
-+ return 0;
-+}
-+
-+static const struct cpr3_reg_data ipq807x_cpr_npu = {
-+ .cpr_valid_fuse_count = IPQ807x_NPU_FUSE_CORNERS,
-+ .init_voltage_param = ipq807x_npu_init_voltage_param,
-+ .fuse_ref_volt = ipq807x_npu_fuse_ref_volt,
-+ .fuse_step_volt = IPQ807x_NPU_FUSE_STEP_VOLT,
-+ .cpr_clk_rate = IPQ807x_NPU_CPR_CLOCK_RATE,
-+};
-+
-+static const struct cpr3_reg_data ipq817x_cpr_npu = {
-+ .cpr_valid_fuse_count = IPQ817x_NPU_FUSE_CORNERS,
-+ .init_voltage_param = ipq807x_npu_init_voltage_param,
-+ .fuse_ref_volt = ipq807x_npu_fuse_ref_volt,
-+ .fuse_step_volt = IPQ807x_NPU_FUSE_STEP_VOLT,
-+ .cpr_clk_rate = IPQ807x_NPU_CPR_CLOCK_RATE,
-+};
-+
-+static const struct cpr3_reg_data ipq9574_cpr_npu = {
-+ .cpr_valid_fuse_count = IPQ9574_NPU_FUSE_CORNERS,
-+ .init_voltage_param = ipq9574_npu_init_voltage_param,
-+ .fuse_ref_volt = ipq9574_npu_fuse_ref_volt,
-+ .fuse_step_volt = IPQ9574_NPU_FUSE_STEP_VOLT,
-+ .cpr_clk_rate = IPQ9574_NPU_CPR_CLOCK_RATE,
-+};
-+
-+static struct of_device_id cpr3_regulator_match_table[] = {
-+ {
-+ .compatible = "qcom,cpr3-ipq807x-npu-regulator",
-+ .data = &ipq807x_cpr_npu
-+ },
-+ {
-+ .compatible = "qcom,cpr3-ipq817x-npu-regulator",
-+ .data = &ipq817x_cpr_npu
-+ },
-+ {
-+ .compatible = "qcom,cpr3-ipq9574-npu-regulator",
-+ .data = &ipq9574_cpr_npu
-+ },
-+ {}
-+};
-+
-+static int cpr3_npu_regulator_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct cpr3_controller *ctrl;
-+ int i, rc;
-+ const struct of_device_id *match;
-+ struct cpr3_reg_data *cpr_data;
-+
-+ if (!dev->of_node) {
-+ dev_err(dev, "Device tree node is missing\n");
-+ return -EINVAL;
-+ }
-+
-+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
-+ if (!ctrl)
-+ return -ENOMEM;
-+ g_ctrl = ctrl;
-+
-+ match = of_match_device(cpr3_regulator_match_table, &pdev->dev);
-+ if (!match)
-+ return -ENODEV;
-+
-+ cpr_data = (struct cpr3_reg_data *)match->data;
-+ g_valid_npu_fuse_count = cpr_data->cpr_valid_fuse_count;
-+ dev_info(dev, "NPU CPR valid fuse count: %d\n", g_valid_npu_fuse_count);
-+ ctrl->cpr_clock_rate = cpr_data->cpr_clk_rate;
-+
-+ ctrl->dev = dev;
-+ /* Set to false later if anything precludes CPR operation. */
-+ ctrl->cpr_allowed_hw = true;
-+
-+ rc = of_property_read_string(dev->of_node, "qcom,cpr-ctrl-name",
-+ &ctrl->name);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to read qcom,cpr-ctrl-name, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_map_fuse_base(ctrl, pdev);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not map fuse base address\n");
-+ return rc;
-+ }
-+
-+ rc = cpr3_read_tcsr_setting(ctrl, pdev, IPQ807x_NPU_CPR_TCSR_START,
-+ IPQ807x_NPU_CPR_TCSR_END);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not read CPR tcsr rsetting\n");
-+ return rc;
-+ }
-+
-+ rc = cpr3_allocate_threads(ctrl, 0, 0);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to allocate CPR thread array, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ if (ctrl->thread_count != 1) {
-+ cpr3_err(ctrl, "expected 1 thread but found %d\n",
-+ ctrl->thread_count);
-+ return -EINVAL;
-+ }
-+
-+ rc = cpr3_npu_init_controller(ctrl);
-+ if (rc) {
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "failed to initialize CPR controller parameters, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_npu_init_thread(&ctrl->thread[0]);
-+ if (rc) {
-+ cpr3_err(ctrl, "thread initialization failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ for (i = 0; i < ctrl->thread[0].vreg_count; i++) {
-+ ctrl->thread[0].vreg[i].cpr3_regulator_data = cpr_data;
-+ rc = cpr3_npu_init_regulator(&ctrl->thread[0].vreg[i]);
-+ if (rc) {
-+ cpr3_err(&ctrl->thread[0].vreg[i], "regulator initialization failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ }
-+
-+ platform_set_drvdata(pdev, ctrl);
-+
-+ return cpr3_open_loop_regulator_register(pdev, ctrl);
-+}
-+
-+static int cpr3_npu_regulator_remove(struct platform_device *pdev)
-+{
-+ struct cpr3_controller *ctrl = platform_get_drvdata(pdev);
-+
-+ return cpr3_open_loop_regulator_unregister(ctrl);
-+}
-+
-+static struct platform_driver cpr3_npu_regulator_driver = {
-+ .driver = {
-+ .name = "qcom,cpr3-npu-regulator",
-+ .of_match_table = cpr3_regulator_match_table,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = cpr3_npu_regulator_probe,
-+ .remove = cpr3_npu_regulator_remove,
-+};
-+
-+static int cpr3_regulator_init(void)
-+{
-+ return platform_driver_register(&cpr3_npu_regulator_driver);
-+}
-+arch_initcall(cpr3_regulator_init);
-+
-+static void cpr3_regulator_exit(void)
-+{
-+ platform_driver_unregister(&cpr3_npu_regulator_driver);
-+}
-+module_exit(cpr3_regulator_exit);
-+
-+MODULE_DESCRIPTION("QCOM CPR3 NPU regulator driver");
-+MODULE_LICENSE("Dual BSD/GPLv2");
-+MODULE_ALIAS("platform:npu-ipq807x");
---- /dev/null
-+++ b/drivers/regulator/cpr3-regulator.c
-@@ -0,0 +1,5112 @@
-+/*
-+ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define pr_fmt(fmt) "%s: " fmt, __func__
-+
-+#include <linux/bitops.h>
-+#include <linux/debugfs.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/ktime.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/slab.h>
-+#include <linux/sort.h>
-+#include <linux/string.h>
-+#include <linux/uaccess.h>
-+#include <linux/regulator/driver.h>
-+#include <linux/regulator/machine.h>
-+#include <linux/regulator/of_regulator.h>
-+#include <linux/panic_notifier.h>
-+
-+#include "cpr3-regulator.h"
-+
-+#define CPR3_REGULATOR_CORNER_INVALID (-1)
-+#define CPR3_RO_MASK GENMASK(CPR3_RO_COUNT - 1, 0)
-+
-+/* CPR3 registers */
-+#define CPR3_REG_CPR_CTL 0x4
-+#define CPR3_CPR_CTL_LOOP_EN_MASK BIT(0)
-+#define CPR3_CPR_CTL_LOOP_ENABLE BIT(0)
-+#define CPR3_CPR_CTL_LOOP_DISABLE 0
-+#define CPR3_CPR_CTL_IDLE_CLOCKS_MASK GENMASK(5, 1)
-+#define CPR3_CPR_CTL_IDLE_CLOCKS_SHIFT 1
-+#define CPR3_CPR_CTL_COUNT_MODE_MASK GENMASK(7, 6)
-+#define CPR3_CPR_CTL_COUNT_MODE_SHIFT 6
-+#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN 0
-+#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MAX 1
-+#define CPR3_CPR_CTL_COUNT_MODE_STAGGERED 2
-+#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE 3
-+#define CPR3_CPR_CTL_COUNT_REPEAT_MASK GENMASK(31, 9)
-+#define CPR3_CPR_CTL_COUNT_REPEAT_SHIFT 9
-+
-+#define CPR3_REG_CPR_STATUS 0x8
-+#define CPR3_CPR_STATUS_BUSY_MASK BIT(0)
-+#define CPR3_CPR_STATUS_AGING_MEASUREMENT_MASK BIT(1)
-+
-+/*
-+ * This register is not present on controllers that support HW closed-loop
-+ * except CPR4 APSS controller.
-+ */
-+#define CPR3_REG_CPR_TIMER_AUTO_CONT 0xC
-+
-+#define CPR3_REG_CPR_STEP_QUOT 0x14
-+#define CPR3_CPR_STEP_QUOT_MIN_MASK GENMASK(5, 0)
-+#define CPR3_CPR_STEP_QUOT_MIN_SHIFT 0
-+#define CPR3_CPR_STEP_QUOT_MAX_MASK GENMASK(11, 6)
-+#define CPR3_CPR_STEP_QUOT_MAX_SHIFT 6
-+
-+#define CPR3_REG_GCNT(ro) (0xA0 + 0x4 * (ro))
-+
-+#define CPR3_REG_SENSOR_BYPASS_WRITE(sensor) (0xE0 + 0x4 * ((sensor) / 32))
-+#define CPR3_REG_SENSOR_BYPASS_WRITE_BANK(bank) (0xE0 + 0x4 * (bank))
-+
-+#define CPR3_REG_SENSOR_MASK_WRITE(sensor) (0x120 + 0x4 * ((sensor) / 32))
-+#define CPR3_REG_SENSOR_MASK_WRITE_BANK(bank) (0x120 + 0x4 * (bank))
-+#define CPR3_REG_SENSOR_MASK_READ(sensor) (0x140 + 0x4 * ((sensor) / 32))
-+
-+#define CPR3_REG_SENSOR_OWNER(sensor) (0x200 + 0x4 * (sensor))
-+
-+#define CPR3_REG_CONT_CMD 0x800
-+#define CPR3_CONT_CMD_ACK 0x1
-+#define CPR3_CONT_CMD_NACK 0x0
-+
-+#define CPR3_REG_THRESH(thread) (0x808 + 0x440 * (thread))
-+#define CPR3_THRESH_CONS_DOWN_MASK GENMASK(3, 0)
-+#define CPR3_THRESH_CONS_DOWN_SHIFT 0
-+#define CPR3_THRESH_CONS_UP_MASK GENMASK(7, 4)
-+#define CPR3_THRESH_CONS_UP_SHIFT 4
-+#define CPR3_THRESH_DOWN_THRESH_MASK GENMASK(12, 8)
-+#define CPR3_THRESH_DOWN_THRESH_SHIFT 8
-+#define CPR3_THRESH_UP_THRESH_MASK GENMASK(17, 13)
-+#define CPR3_THRESH_UP_THRESH_SHIFT 13
-+
-+#define CPR3_REG_RO_MASK(thread) (0x80C + 0x440 * (thread))
-+
-+#define CPR3_REG_RESULT0(thread) (0x810 + 0x440 * (thread))
-+#define CPR3_RESULT0_BUSY_MASK BIT(0)
-+#define CPR3_RESULT0_STEP_DN_MASK BIT(1)
-+#define CPR3_RESULT0_STEP_UP_MASK BIT(2)
-+#define CPR3_RESULT0_ERROR_STEPS_MASK GENMASK(7, 3)
-+#define CPR3_RESULT0_ERROR_STEPS_SHIFT 3
-+#define CPR3_RESULT0_ERROR_MASK GENMASK(19, 8)
-+#define CPR3_RESULT0_ERROR_SHIFT 8
-+#define CPR3_RESULT0_NEGATIVE_MASK BIT(20)
-+
-+#define CPR3_REG_RESULT1(thread) (0x814 + 0x440 * (thread))
-+#define CPR3_RESULT1_QUOT_MIN_MASK GENMASK(11, 0)
-+#define CPR3_RESULT1_QUOT_MIN_SHIFT 0
-+#define CPR3_RESULT1_QUOT_MAX_MASK GENMASK(23, 12)
-+#define CPR3_RESULT1_QUOT_MAX_SHIFT 12
-+#define CPR3_RESULT1_RO_MIN_MASK GENMASK(27, 24)
-+#define CPR3_RESULT1_RO_MIN_SHIFT 24
-+#define CPR3_RESULT1_RO_MAX_MASK GENMASK(31, 28)
-+#define CPR3_RESULT1_RO_MAX_SHIFT 28
-+
-+#define CPR3_REG_RESULT2(thread) (0x818 + 0x440 * (thread))
-+#define CPR3_RESULT2_STEP_QUOT_MIN_MASK GENMASK(5, 0)
-+#define CPR3_RESULT2_STEP_QUOT_MIN_SHIFT 0
-+#define CPR3_RESULT2_STEP_QUOT_MAX_MASK GENMASK(11, 6)
-+#define CPR3_RESULT2_STEP_QUOT_MAX_SHIFT 6
-+#define CPR3_RESULT2_SENSOR_MIN_MASK GENMASK(23, 16)
-+#define CPR3_RESULT2_SENSOR_MIN_SHIFT 16
-+#define CPR3_RESULT2_SENSOR_MAX_MASK GENMASK(31, 24)
-+#define CPR3_RESULT2_SENSOR_MAX_SHIFT 24
-+
-+#define CPR3_REG_IRQ_EN 0x81C
-+#define CPR3_REG_IRQ_CLEAR 0x820
-+#define CPR3_REG_IRQ_STATUS 0x824
-+#define CPR3_IRQ_UP BIT(3)
-+#define CPR3_IRQ_MID BIT(2)
-+#define CPR3_IRQ_DOWN BIT(1)
-+
-+#define CPR3_REG_TARGET_QUOT(thread, ro) \
-+ (0x840 + 0x440 * (thread) + 0x4 * (ro))
-+
-+/* Registers found only on controllers that support HW closed-loop. */
-+#define CPR3_REG_PD_THROTTLE 0xE8
-+#define CPR3_PD_THROTTLE_DISABLE 0x0
-+
-+#define CPR3_REG_HW_CLOSED_LOOP 0x3000
-+#define CPR3_HW_CLOSED_LOOP_ENABLE 0x0
-+#define CPR3_HW_CLOSED_LOOP_DISABLE 0x1
-+
-+#define CPR3_REG_CPR_TIMER_MID_CONT 0x3004
-+#define CPR3_REG_CPR_TIMER_UP_DN_CONT 0x3008
-+
-+#define CPR3_REG_LAST_MEASUREMENT 0x7F8
-+#define CPR3_LAST_MEASUREMENT_THREAD_DN_SHIFT 0
-+#define CPR3_LAST_MEASUREMENT_THREAD_UP_SHIFT 4
-+#define CPR3_LAST_MEASUREMENT_THREAD_DN(thread) \
-+ (BIT(thread) << CPR3_LAST_MEASUREMENT_THREAD_DN_SHIFT)
-+#define CPR3_LAST_MEASUREMENT_THREAD_UP(thread) \
-+ (BIT(thread) << CPR3_LAST_MEASUREMENT_THREAD_UP_SHIFT)
-+#define CPR3_LAST_MEASUREMENT_AGGR_DN BIT(8)
-+#define CPR3_LAST_MEASUREMENT_AGGR_MID BIT(9)
-+#define CPR3_LAST_MEASUREMENT_AGGR_UP BIT(10)
-+#define CPR3_LAST_MEASUREMENT_VALID BIT(11)
-+#define CPR3_LAST_MEASUREMENT_SAW_ERROR BIT(12)
-+#define CPR3_LAST_MEASUREMENT_PD_BYPASS_MASK GENMASK(23, 16)
-+#define CPR3_LAST_MEASUREMENT_PD_BYPASS_SHIFT 16
-+
-+/* CPR4 controller specific registers and bit definitions */
-+#define CPR4_REG_CPR_TIMER_CLAMP 0x10
-+#define CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN BIT(27)
-+
-+#define CPR4_REG_MISC 0x700
-+#define CPR4_MISC_MARGIN_TABLE_ROW_SELECT_MASK GENMASK(23, 20)
-+#define CPR4_MISC_MARGIN_TABLE_ROW_SELECT_SHIFT 20
-+#define CPR4_MISC_TEMP_SENSOR_ID_START_MASK GENMASK(27, 24)
-+#define CPR4_MISC_TEMP_SENSOR_ID_START_SHIFT 24
-+#define CPR4_MISC_TEMP_SENSOR_ID_END_MASK GENMASK(31, 28)
-+#define CPR4_MISC_TEMP_SENSOR_ID_END_SHIFT 28
-+
-+#define CPR4_REG_SAW_ERROR_STEP_LIMIT 0x7A4
-+#define CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK GENMASK(4, 0)
-+#define CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT 0
-+#define CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK GENMASK(9, 5)
-+#define CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT 5
-+
-+#define CPR4_REG_MARGIN_TEMP_CORE_TIMERS 0x7A8
-+#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK GENMASK(28, 18)
-+#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHIFT 18
-+
-+#define CPR4_REG_MARGIN_TEMP_CORE(core) (0x7AC + 0x4 * (core))
-+#define CPR4_MARGIN_TEMP_CORE_ADJ_MASK GENMASK(7, 0)
-+#define CPR4_MARGIN_TEMP_CORE_ADJ_SHIFT 8
-+
-+#define CPR4_REG_MARGIN_TEMP_POINT0N1 0x7F0
-+#define CPR4_MARGIN_TEMP_POINT0_MASK GENMASK(11, 0)
-+#define CPR4_MARGIN_TEMP_POINT0_SHIFT 0
-+#define CPR4_MARGIN_TEMP_POINT1_MASK GENMASK(23, 12)
-+#define CPR4_MARGIN_TEMP_POINT1_SHIFT 12
-+#define CPR4_REG_MARGIN_TEMP_POINT2 0x7F4
-+#define CPR4_MARGIN_TEMP_POINT2_MASK GENMASK(11, 0)
-+#define CPR4_MARGIN_TEMP_POINT2_SHIFT 0
-+
-+#define CPR4_REG_MARGIN_ADJ_CTL 0x7F8
-+#define CPR4_MARGIN_ADJ_CTL_BOOST_EN BIT(0)
-+#define CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN BIT(1)
-+#define CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN BIT(2)
-+#define CPR4_MARGIN_ADJ_CTL_TIMER_SETTLE_VOLTAGE_EN BIT(3)
-+#define CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK BIT(4)
-+#define CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE BIT(4)
-+#define CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE 0
-+#define CPR4_MARGIN_ADJ_CTL_PER_RO_KV_MARGIN_EN BIT(7)
-+#define CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN BIT(8)
-+#define CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_MASK GENMASK(16, 12)
-+#define CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_SHIFT 12
-+#define CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_MASK GENMASK(21, 19)
-+#define CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_SHIFT 19
-+#define CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_MASK GENMASK(25, 22)
-+#define CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_SHIFT 22
-+#define CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_MASK GENMASK(31, 26)
-+#define CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_SHIFT 26
-+
-+#define CPR4_REG_CPR_MASK_THREAD(thread) (0x80C + 0x440 * (thread))
-+#define CPR4_CPR_MASK_THREAD_DISABLE_THREAD BIT(31)
-+#define CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK GENMASK(15, 0)
-+
-+/*
-+ * The amount of time to wait for the CPR controller to become idle when
-+ * performing an aging measurement.
-+ */
-+#define CPR3_AGING_MEASUREMENT_TIMEOUT_NS 5000000
-+
-+/*
-+ * The number of individual aging measurements to perform which are then
-+ * averaged together in order to determine the final aging adjustment value.
-+ */
-+#define CPR3_AGING_MEASUREMENT_ITERATIONS 16
-+
-+/*
-+ * Aging measurements for the aged and unaged ring oscillators take place a few
-+ * microseconds apart. If the vdd-supply voltage fluctuates between the two
-+ * measurements, then the difference between them will be incorrect. The
-+ * difference could end up too high or too low. This constant defines the
-+ * number of lowest and highest measurements to ignore when averaging.
-+ */
-+#define CPR3_AGING_MEASUREMENT_FILTER 3
-+
-+/*
-+ * The number of times to attempt the full aging measurement sequence before
-+ * declaring a measurement failure.
-+ */
-+#define CPR3_AGING_RETRY_COUNT 5
-+
-+/*
-+ * The maximum time to wait in microseconds for a CPR register write to
-+ * complete.
-+ */
-+#define CPR3_REGISTER_WRITE_DELAY_US 200
-+
-+static DEFINE_MUTEX(cpr3_controller_list_mutex);
-+static LIST_HEAD(cpr3_controller_list);
-+static struct dentry *cpr3_debugfs_base;
-+
-+/**
-+ * cpr3_read() - read four bytes from the memory address specified
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @offset: Offset in bytes from the CPR3 controller's base address
-+ *
-+ * Return: memory address value
-+ */
-+static inline u32 cpr3_read(struct cpr3_controller *ctrl, u32 offset)
-+{
-+ if (!ctrl->cpr_enabled) {
-+ cpr3_err(ctrl, "CPR register reads are not possible when CPR clocks are disabled\n");
-+ return 0;
-+ }
-+
-+ return readl_relaxed(ctrl->cpr_ctrl_base + offset);
-+}
-+
-+/**
-+ * cpr3_write() - write four bytes to the memory address specified
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @offset: Offset in bytes from the CPR3 controller's base address
-+ * @value: Value to write to the memory address
-+ *
-+ * Return: none
-+ */
-+static inline void cpr3_write(struct cpr3_controller *ctrl, u32 offset,
-+ u32 value)
-+{
-+ if (!ctrl->cpr_enabled) {
-+ cpr3_err(ctrl, "CPR register writes are not possible when CPR clocks are disabled\n");
-+ return;
-+ }
-+
-+ writel_relaxed(value, ctrl->cpr_ctrl_base + offset);
-+}
-+
-+/**
-+ * cpr3_masked_write() - perform a read-modify-write sequence so that only
-+ * masked bits are modified
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @offset: Offset in bytes from the CPR3 controller's base address
-+ * @mask: Mask identifying the bits that should be modified
-+ * @value: Value to write to the memory address
-+ *
-+ * Return: none
-+ */
-+static inline void cpr3_masked_write(struct cpr3_controller *ctrl, u32 offset,
-+ u32 mask, u32 value)
-+{
-+ u32 reg_val, orig_val;
-+
-+ if (!ctrl->cpr_enabled) {
-+ cpr3_err(ctrl, "CPR register writes are not possible when CPR clocks are disabled\n");
-+ return;
-+ }
-+
-+ reg_val = orig_val = readl_relaxed(ctrl->cpr_ctrl_base + offset);
-+ reg_val &= ~mask;
-+ reg_val |= value & mask;
-+
-+ if (reg_val != orig_val)
-+ writel_relaxed(reg_val, ctrl->cpr_ctrl_base + offset);
-+}
-+
-+/**
-+ * cpr3_ctrl_loop_enable() - enable the CPR sensing loop for a given controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: none
-+ */
-+static inline void cpr3_ctrl_loop_enable(struct cpr3_controller *ctrl)
-+{
-+ if (ctrl->cpr_enabled && !(ctrl->aggr_corner.sdelta
-+ && ctrl->aggr_corner.sdelta->allow_boost))
-+ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL,
-+ CPR3_CPR_CTL_LOOP_EN_MASK, CPR3_CPR_CTL_LOOP_ENABLE);
-+}
-+
-+/**
-+ * cpr3_ctrl_loop_disable() - disable the CPR sensing loop for a given
-+ * controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: none
-+ */
-+static inline void cpr3_ctrl_loop_disable(struct cpr3_controller *ctrl)
-+{
-+ if (ctrl->cpr_enabled)
-+ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL,
-+ CPR3_CPR_CTL_LOOP_EN_MASK, CPR3_CPR_CTL_LOOP_DISABLE);
-+}
-+
-+/**
-+ * cpr3_clock_enable() - prepare and enable all clocks used by this CPR3
-+ * controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_clock_enable(struct cpr3_controller *ctrl)
-+{
-+ int rc;
-+
-+ rc = clk_prepare_enable(ctrl->bus_clk);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to enable bus clock, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ rc = clk_prepare_enable(ctrl->iface_clk);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to enable interface clock, rc=%d\n", rc);
-+ clk_disable_unprepare(ctrl->bus_clk);
-+ return rc;
-+ }
-+
-+ rc = clk_prepare_enable(ctrl->core_clk);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to enable core clock, rc=%d\n", rc);
-+ clk_disable_unprepare(ctrl->iface_clk);
-+ clk_disable_unprepare(ctrl->bus_clk);
-+ return rc;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_clock_disable() - disable and unprepare all clocks used by this CPR3
-+ * controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: none
-+ */
-+static void cpr3_clock_disable(struct cpr3_controller *ctrl)
-+{
-+ clk_disable_unprepare(ctrl->core_clk);
-+ clk_disable_unprepare(ctrl->iface_clk);
-+ clk_disable_unprepare(ctrl->bus_clk);
-+}
-+
-+/**
-+ * cpr3_ctrl_clear_cpr4_config() - clear the CPR4 register configuration
-+ * programmed for current aggregated corner of a given controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static inline int cpr3_ctrl_clear_cpr4_config(struct cpr3_controller *ctrl)
-+{
-+ struct cpr4_sdelta *aggr_sdelta = ctrl->aggr_corner.sdelta;
-+ bool cpr_enabled = ctrl->cpr_enabled;
-+ int i, rc = 0;
-+
-+ if (!aggr_sdelta || !(aggr_sdelta->allow_core_count_adj
-+ || aggr_sdelta->allow_temp_adj || aggr_sdelta->allow_boost))
-+ /* cpr4 features are not enabled */
-+ return 0;
-+
-+ /* Ensure that CPR clocks are enabled before writing to registers. */
-+ if (!cpr_enabled) {
-+ rc = cpr3_clock_enable(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+ ctrl->cpr_enabled = true;
-+ }
-+
-+ /*
-+ * Clear feature enable configuration made for current
-+ * aggregated corner.
-+ */
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_MASK
-+ | CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN
-+ | CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN
-+ | CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN
-+ | CPR4_MARGIN_ADJ_CTL_BOOST_EN
-+ | CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, 0);
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MISC,
-+ CPR4_MISC_MARGIN_TABLE_ROW_SELECT_MASK,
-+ 0 << CPR4_MISC_MARGIN_TABLE_ROW_SELECT_SHIFT);
-+
-+ for (i = 0; i <= aggr_sdelta->max_core_count; i++) {
-+ /* Clear voltage margin adjustments programmed in TEMP_COREi */
-+ cpr3_write(ctrl, CPR4_REG_MARGIN_TEMP_CORE(i), 0);
-+ }
-+
-+ /* Turn off CPR clocks if they were off before this function call. */
-+ if (!cpr_enabled) {
-+ cpr3_clock_disable(ctrl);
-+ ctrl->cpr_enabled = false;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_closed_loop_enable() - enable logical CPR closed-loop operation
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_closed_loop_enable(struct cpr3_controller *ctrl)
-+{
-+ int rc;
-+
-+ if (!ctrl->cpr_allowed_hw || !ctrl->cpr_allowed_sw) {
-+ cpr3_err(ctrl, "cannot enable closed-loop CPR operation because it is disallowed\n");
-+ return -EPERM;
-+ } else if (ctrl->cpr_enabled) {
-+ /* Already enabled */
-+ return 0;
-+ } else if (ctrl->cpr_suspended) {
-+ /*
-+ * CPR must remain disabled as the system is entering suspend.
-+ */
-+ return 0;
-+ }
-+
-+ rc = cpr3_clock_enable(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to enable CPR clocks, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ ctrl->cpr_enabled = true;
-+ cpr3_debug(ctrl, "CPR closed-loop operation enabled\n");
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_closed_loop_disable() - disable logical CPR closed-loop operation
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static inline int cpr3_closed_loop_disable(struct cpr3_controller *ctrl)
-+{
-+ if (!ctrl->cpr_enabled) {
-+ /* Already disabled */
-+ return 0;
-+ }
-+
-+ cpr3_clock_disable(ctrl);
-+ ctrl->cpr_enabled = false;
-+ cpr3_debug(ctrl, "CPR closed-loop operation disabled\n");
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_get_gcnt() - returns the GCNT register value corresponding
-+ * to the clock rate and sensor time of the CPR3 controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: GCNT value
-+ */
-+static u32 cpr3_regulator_get_gcnt(struct cpr3_controller *ctrl)
-+{
-+ u64 temp;
-+ unsigned int remainder;
-+ u32 gcnt;
-+
-+ temp = (u64)ctrl->cpr_clock_rate * (u64)ctrl->sensor_time;
-+ remainder = do_div(temp, 1000000000);
-+ if (remainder)
-+ temp++;
-+ /*
-+ * GCNT == 0 corresponds to a single ref clock measurement interval so
-+ * offset GCNT values by 1.
-+ */
-+ gcnt = temp - 1;
-+
-+ return gcnt;
-+}
-+
-+/**
-+ * cpr3_regulator_init_thread() - performs hardware initialization of CPR
-+ * thread registers
-+ * @thread: Pointer to the CPR3 thread
-+ *
-+ * CPR interface/bus clocks must be enabled before calling this function.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_init_thread(struct cpr3_thread *thread)
-+{
-+ u32 reg;
-+
-+ reg = (thread->consecutive_up << CPR3_THRESH_CONS_UP_SHIFT)
-+ & CPR3_THRESH_CONS_UP_MASK;
-+ reg |= (thread->consecutive_down << CPR3_THRESH_CONS_DOWN_SHIFT)
-+ & CPR3_THRESH_CONS_DOWN_MASK;
-+ reg |= (thread->up_threshold << CPR3_THRESH_UP_THRESH_SHIFT)
-+ & CPR3_THRESH_UP_THRESH_MASK;
-+ reg |= (thread->down_threshold << CPR3_THRESH_DOWN_THRESH_SHIFT)
-+ & CPR3_THRESH_DOWN_THRESH_MASK;
-+
-+ cpr3_write(thread->ctrl, CPR3_REG_THRESH(thread->thread_id), reg);
-+
-+ /*
-+ * Mask all RO's initially so that unused thread doesn't contribute
-+ * to closed-loop voltage.
-+ */
-+ cpr3_write(thread->ctrl, CPR3_REG_RO_MASK(thread->thread_id),
-+ CPR3_RO_MASK);
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr4_regulator_init_temp_points() - performs hardware initialization of CPR4
-+ * registers to track tsen temperature data and also specify the
-+ * temperature band range values to apply different voltage margins
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * CPR interface/bus clocks must be enabled before calling this function.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_regulator_init_temp_points(struct cpr3_controller *ctrl)
-+{
-+ if (!ctrl->allow_temp_adj)
-+ return 0;
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MISC,
-+ CPR4_MISC_TEMP_SENSOR_ID_START_MASK,
-+ ctrl->temp_sensor_id_start
-+ << CPR4_MISC_TEMP_SENSOR_ID_START_SHIFT);
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MISC,
-+ CPR4_MISC_TEMP_SENSOR_ID_END_MASK,
-+ ctrl->temp_sensor_id_end
-+ << CPR4_MISC_TEMP_SENSOR_ID_END_SHIFT);
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_POINT2,
-+ CPR4_MARGIN_TEMP_POINT2_MASK,
-+ (ctrl->temp_band_count == 4 ? ctrl->temp_points[2] : 0x7FF)
-+ << CPR4_MARGIN_TEMP_POINT2_SHIFT);
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_POINT0N1,
-+ CPR4_MARGIN_TEMP_POINT1_MASK,
-+ (ctrl->temp_band_count >= 3 ? ctrl->temp_points[1] : 0x7FF)
-+ << CPR4_MARGIN_TEMP_POINT1_SHIFT);
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_POINT0N1,
-+ CPR4_MARGIN_TEMP_POINT0_MASK,
-+ (ctrl->temp_band_count >= 2 ? ctrl->temp_points[0] : 0x7FF)
-+ << CPR4_MARGIN_TEMP_POINT0_SHIFT);
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_init_cpr4() - performs hardware initialization at the
-+ * controller and thread level required for CPR4 operation.
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * CPR interface/bus clocks must be enabled before calling this function.
-+ * This function allocates sdelta structures and sdelta tables for aggregated
-+ * corners of the controller and its threads.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_init_cpr4(struct cpr3_controller *ctrl)
-+{
-+ struct cpr3_thread *thread;
-+ struct cpr3_regulator *vreg;
-+ struct cpr4_sdelta *sdelta;
-+ int i, j, ctrl_max_core_count, thread_max_core_count, rc = 0;
-+ bool ctrl_valid_sdelta, thread_valid_sdelta;
-+ u32 pmic_step_size = 1;
-+ int thread_id = 0;
-+ u64 temp;
-+
-+ if (ctrl->supports_hw_closed_loop) {
-+ if (ctrl->saw_use_unit_mV)
-+ pmic_step_size = ctrl->step_volt / 1000;
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_MASK,
-+ (pmic_step_size
-+ << CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_SHIFT));
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_SAW_ERROR_STEP_LIMIT,
-+ CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK,
-+ (ctrl->down_error_step_limit
-+ << CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT));
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_SAW_ERROR_STEP_LIMIT,
-+ CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK,
-+ (ctrl->up_error_step_limit
-+ << CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT));
-+
-+ /*
-+ * Enable thread aggregation regardless of which threads are
-+ * enabled or disabled.
-+ */
-+ cpr3_masked_write(ctrl, CPR4_REG_CPR_TIMER_CLAMP,
-+ CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN,
-+ CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN);
-+
-+ switch (ctrl->thread_count) {
-+ case 0:
-+ /* Disable both threads */
-+ cpr3_masked_write(ctrl, CPR4_REG_CPR_MASK_THREAD(0),
-+ CPR4_CPR_MASK_THREAD_DISABLE_THREAD
-+ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK,
-+ CPR4_CPR_MASK_THREAD_DISABLE_THREAD
-+ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK);
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_CPR_MASK_THREAD(1),
-+ CPR4_CPR_MASK_THREAD_DISABLE_THREAD
-+ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK,
-+ CPR4_CPR_MASK_THREAD_DISABLE_THREAD
-+ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK);
-+ break;
-+ case 1:
-+ /* Disable unused thread */
-+ thread_id = ctrl->thread[0].thread_id ? 0 : 1;
-+ cpr3_masked_write(ctrl,
-+ CPR4_REG_CPR_MASK_THREAD(thread_id),
-+ CPR4_CPR_MASK_THREAD_DISABLE_THREAD
-+ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK,
-+ CPR4_CPR_MASK_THREAD_DISABLE_THREAD
-+ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK);
-+ break;
-+ }
-+ }
-+
-+ if (!ctrl->allow_core_count_adj && !ctrl->allow_temp_adj
-+ && !ctrl->allow_boost) {
-+ /*
-+ * Skip below configuration as none of the features
-+ * are enabled.
-+ */
-+ return rc;
-+ }
-+
-+ if (ctrl->supports_hw_closed_loop)
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_TIMER_SETTLE_VOLTAGE_EN,
-+ CPR4_MARGIN_ADJ_CTL_TIMER_SETTLE_VOLTAGE_EN);
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_MASK,
-+ ctrl->step_quot_fixed
-+ << CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_SHIFT);
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_PER_RO_KV_MARGIN_EN,
-+ (ctrl->use_dynamic_step_quot
-+ ? CPR4_MARGIN_ADJ_CTL_PER_RO_KV_MARGIN_EN : 0));
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_MASK,
-+ ctrl->initial_temp_band
-+ << CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_SHIFT);
-+
-+ rc = cpr4_regulator_init_temp_points(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "initialize temp points failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ if (ctrl->voltage_settling_time) {
-+ /*
-+ * Configure the settling timer used to account for
-+ * one VDD supply step.
-+ */
-+ temp = (u64)ctrl->cpr_clock_rate
-+ * (u64)ctrl->voltage_settling_time;
-+ do_div(temp, 1000000000);
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_CORE_TIMERS,
-+ CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK,
-+ temp
-+ << CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHIFT);
-+ }
-+
-+ /*
-+ * Allocate memory for cpr4_sdelta structure and sdelta table for
-+ * controller aggregated corner by finding the maximum core count
-+ * used by any cpr3 regulators.
-+ */
-+ ctrl_max_core_count = 1;
-+ ctrl_valid_sdelta = false;
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ thread = &ctrl->thread[i];
-+
-+ /*
-+ * Allocate memory for cpr4_sdelta structure and sdelta table
-+ * for thread aggregated corner by finding the maximum core
-+ * count used by any cpr3 regulators of the thread.
-+ */
-+ thread_max_core_count = 1;
-+ thread_valid_sdelta = false;
-+ for (j = 0; j < thread->vreg_count; j++) {
-+ vreg = &thread->vreg[j];
-+ thread_max_core_count = max(thread_max_core_count,
-+ vreg->max_core_count);
-+ thread_valid_sdelta |= (vreg->allow_core_count_adj
-+ | vreg->allow_temp_adj
-+ | vreg->allow_boost);
-+ }
-+ if (thread_valid_sdelta) {
-+ sdelta = devm_kzalloc(ctrl->dev, sizeof(*sdelta),
-+ GFP_KERNEL);
-+ if (!sdelta)
-+ return -ENOMEM;
-+
-+ sdelta->table = devm_kcalloc(ctrl->dev,
-+ thread_max_core_count
-+ * ctrl->temp_band_count,
-+ sizeof(*sdelta->table),
-+ GFP_KERNEL);
-+ if (!sdelta->table)
-+ return -ENOMEM;
-+
-+ sdelta->boost_table = devm_kcalloc(ctrl->dev,
-+ ctrl->temp_band_count,
-+ sizeof(*sdelta->boost_table),
-+ GFP_KERNEL);
-+ if (!sdelta->boost_table)
-+ return -ENOMEM;
-+
-+ thread->aggr_corner.sdelta = sdelta;
-+ }
-+
-+ ctrl_valid_sdelta |= thread_valid_sdelta;
-+ ctrl_max_core_count = max(ctrl_max_core_count,
-+ thread_max_core_count);
-+ }
-+
-+ if (ctrl_valid_sdelta) {
-+ sdelta = devm_kzalloc(ctrl->dev, sizeof(*sdelta), GFP_KERNEL);
-+ if (!sdelta)
-+ return -ENOMEM;
-+
-+ sdelta->table = devm_kcalloc(ctrl->dev, ctrl_max_core_count
-+ * ctrl->temp_band_count,
-+ sizeof(*sdelta->table), GFP_KERNEL);
-+ if (!sdelta->table)
-+ return -ENOMEM;
-+
-+ sdelta->boost_table = devm_kcalloc(ctrl->dev,
-+ ctrl->temp_band_count,
-+ sizeof(*sdelta->boost_table),
-+ GFP_KERNEL);
-+ if (!sdelta->boost_table)
-+ return -ENOMEM;
-+
-+ ctrl->aggr_corner.sdelta = sdelta;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_write_temp_core_margin() - programs hardware SDELTA registers with
-+ * the voltage margin adjustments that need to be applied for
-+ * different online core-count and temperature bands.
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @addr: SDELTA register address
-+ * @temp_core_adj: Array of voltage margin values for different temperature
-+ * bands.
-+ *
-+ * CPR interface/bus clocks must be enabled before calling this function.
-+ *
-+ * Return: none
-+ */
-+static void cpr3_write_temp_core_margin(struct cpr3_controller *ctrl,
-+ int addr, int *temp_core_adj)
-+{
-+ int i, margin_steps;
-+ u32 reg = 0;
-+
-+ for (i = 0; i < ctrl->temp_band_count; i++) {
-+ margin_steps = max(min(temp_core_adj[i], 127), -128);
-+ reg |= (margin_steps & CPR4_MARGIN_TEMP_CORE_ADJ_MASK) <<
-+ (i * CPR4_MARGIN_TEMP_CORE_ADJ_SHIFT);
-+ }
-+
-+ cpr3_write(ctrl, addr, reg);
-+ cpr3_debug(ctrl, "sdelta offset=0x%08x, val=0x%08x\n", addr, reg);
-+}
-+
-+/**
-+ * cpr3_controller_program_sdelta() - programs hardware SDELTA registers with
-+ * the voltage margin adjustments that need to be applied at
-+ * different online core-count and temperature bands. Also,
-+ * programs hardware register configuration for per-online-core
-+ * and per-temperature based adjustments.
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * CPR interface/bus clocks must be enabled before calling this function.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_controller_program_sdelta(struct cpr3_controller *ctrl)
-+{
-+ struct cpr3_corner *corner = &ctrl->aggr_corner;
-+ struct cpr4_sdelta *sdelta = corner->sdelta;
-+ int i, index, max_core_count, rc = 0;
-+ bool cpr_enabled = ctrl->cpr_enabled;
-+
-+ if (!sdelta)
-+ /* cpr4_sdelta not defined for current aggregated corner */
-+ return 0;
-+
-+ if (ctrl->supports_hw_closed_loop && ctrl->cpr_enabled) {
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK,
-+ (ctrl->use_hw_closed_loop && !sdelta->allow_boost)
-+ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE : 0);
-+ }
-+
-+ if (!sdelta->allow_core_count_adj && !sdelta->allow_temp_adj
-+ && !sdelta->allow_boost) {
-+ /*
-+ * Per-online-core, per-temperature and voltage boost
-+ * adjustments are disabled for this aggregation corner.
-+ */
-+ return 0;
-+ }
-+
-+ /* Ensure that CPR clocks are enabled before writing to registers. */
-+ if (!cpr_enabled) {
-+ rc = cpr3_clock_enable(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+ ctrl->cpr_enabled = true;
-+ }
-+
-+ max_core_count = sdelta->max_core_count;
-+
-+ if (sdelta->allow_core_count_adj || sdelta->allow_temp_adj) {
-+ if (sdelta->allow_core_count_adj) {
-+ /* Program TEMP_CORE0 to same margins as TEMP_CORE1 */
-+ cpr3_write_temp_core_margin(ctrl,
-+ CPR4_REG_MARGIN_TEMP_CORE(0),
-+ &sdelta->table[0]);
-+ }
-+
-+ for (i = 0; i < max_core_count; i++) {
-+ index = i * sdelta->temp_band_count;
-+ /*
-+ * Program TEMP_COREi with voltage margin adjustments
-+ * that need to be applied when the number of cores
-+ * becomes i.
-+ */
-+ cpr3_write_temp_core_margin(ctrl,
-+ CPR4_REG_MARGIN_TEMP_CORE(
-+ sdelta->allow_core_count_adj
-+ ? i + 1 : max_core_count),
-+ &sdelta->table[index]);
-+ }
-+ }
-+
-+ if (sdelta->allow_boost) {
-+ /* Program only boost_num_cores row of SDELTA */
-+ cpr3_write_temp_core_margin(ctrl,
-+ CPR4_REG_MARGIN_TEMP_CORE(sdelta->boost_num_cores),
-+ &sdelta->boost_table[0]);
-+ }
-+
-+ if (!sdelta->allow_core_count_adj && !sdelta->allow_boost) {
-+ cpr3_masked_write(ctrl, CPR4_REG_MISC,
-+ CPR4_MISC_MARGIN_TABLE_ROW_SELECT_MASK,
-+ max_core_count
-+ << CPR4_MISC_MARGIN_TABLE_ROW_SELECT_SHIFT);
-+ }
-+
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_MASK
-+ | CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN
-+ | CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN
-+ | CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN
-+ | CPR4_MARGIN_ADJ_CTL_BOOST_EN,
-+ max_core_count << CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_SHIFT
-+ | ((sdelta->allow_core_count_adj || sdelta->allow_boost)
-+ ? CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN : 0)
-+ | ((sdelta->allow_temp_adj && ctrl->supports_hw_closed_loop)
-+ ? CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN : 0)
-+ | (((ctrl->use_hw_closed_loop && !sdelta->allow_boost)
-+ || !ctrl->supports_hw_closed_loop)
-+ ? CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN : 0)
-+ | (sdelta->allow_boost
-+ ? CPR4_MARGIN_ADJ_CTL_BOOST_EN : 0));
-+
-+ /*
-+ * Ensure that all previous CPR register writes have completed before
-+ * continuing.
-+ */
-+ mb();
-+
-+ /* Turn off CPR clocks if they were off before this function call. */
-+ if (!cpr_enabled) {
-+ cpr3_clock_disable(ctrl);
-+ ctrl->cpr_enabled = false;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_init_ctrl() - performs hardware initialization of CPR
-+ * controller registers
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_init_ctrl(struct cpr3_controller *ctrl)
-+{
-+ int i, j, k, m, rc;
-+ u32 ro_used = 0;
-+ u32 gcnt, cont_dly, up_down_dly, val;
-+ u64 temp;
-+ char *mode;
-+
-+ if (ctrl->core_clk) {
-+ rc = clk_set_rate(ctrl->core_clk, ctrl->cpr_clock_rate);
-+ if (rc) {
-+ cpr3_err(ctrl, "clk_set_rate(core_clk, %u) failed, rc=%d\n",
-+ ctrl->cpr_clock_rate, rc);
-+ return rc;
-+ }
-+ }
-+
-+ rc = cpr3_clock_enable(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+ ctrl->cpr_enabled = true;
-+
-+ /* Find all RO's used by any corner of any regulator. */
-+ for (i = 0; i < ctrl->thread_count; i++)
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++)
-+ for (k = 0; k < ctrl->thread[i].vreg[j].corner_count;
-+ k++)
-+ for (m = 0; m < CPR3_RO_COUNT; m++)
-+ if (ctrl->thread[i].vreg[j].corner[k].
-+ target_quot[m])
-+ ro_used |= BIT(m);
-+
-+ /* Configure the GCNT of the RO's that will be used */
-+ gcnt = cpr3_regulator_get_gcnt(ctrl);
-+ for (i = 0; i < CPR3_RO_COUNT; i++)
-+ if (ro_used & BIT(i))
-+ cpr3_write(ctrl, CPR3_REG_GCNT(i), gcnt);
-+
-+ /* Configure the loop delay time */
-+ temp = (u64)ctrl->cpr_clock_rate * (u64)ctrl->loop_time;
-+ do_div(temp, 1000000000);
-+ cont_dly = temp;
-+ if (ctrl->supports_hw_closed_loop
-+ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3)
-+ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_MID_CONT, cont_dly);
-+ else
-+ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_AUTO_CONT, cont_dly);
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ temp = (u64)ctrl->cpr_clock_rate *
-+ (u64)ctrl->up_down_delay_time;
-+ do_div(temp, 1000000000);
-+ up_down_dly = temp;
-+ if (ctrl->supports_hw_closed_loop)
-+ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_UP_DN_CONT,
-+ up_down_dly);
-+ cpr3_debug(ctrl, "up_down_dly=%u, up_down_delay_time=%u ns\n",
-+ up_down_dly, ctrl->up_down_delay_time);
-+ }
-+
-+ cpr3_debug(ctrl, "cpr_clock_rate=%u HZ, sensor_time=%u ns, loop_time=%u ns, gcnt=%u, cont_dly=%u\n",
-+ ctrl->cpr_clock_rate, ctrl->sensor_time, ctrl->loop_time,
-+ gcnt, cont_dly);
-+
-+ /* Configure CPR sensor operation */
-+ val = (ctrl->idle_clocks << CPR3_CPR_CTL_IDLE_CLOCKS_SHIFT)
-+ & CPR3_CPR_CTL_IDLE_CLOCKS_MASK;
-+ val |= (ctrl->count_mode << CPR3_CPR_CTL_COUNT_MODE_SHIFT)
-+ & CPR3_CPR_CTL_COUNT_MODE_MASK;
-+ val |= (ctrl->count_repeat << CPR3_CPR_CTL_COUNT_REPEAT_SHIFT)
-+ & CPR3_CPR_CTL_COUNT_REPEAT_MASK;
-+ cpr3_write(ctrl, CPR3_REG_CPR_CTL, val);
-+
-+ cpr3_debug(ctrl, "idle_clocks=%u, count_mode=%u, count_repeat=%u; CPR_CTL=0x%08X\n",
-+ ctrl->idle_clocks, ctrl->count_mode, ctrl->count_repeat, val);
-+
-+ /* Configure CPR default step quotients */
-+ val = (ctrl->step_quot_init_min << CPR3_CPR_STEP_QUOT_MIN_SHIFT)
-+ & CPR3_CPR_STEP_QUOT_MIN_MASK;
-+ val |= (ctrl->step_quot_init_max << CPR3_CPR_STEP_QUOT_MAX_SHIFT)
-+ & CPR3_CPR_STEP_QUOT_MAX_MASK;
-+ cpr3_write(ctrl, CPR3_REG_CPR_STEP_QUOT, val);
-+
-+ cpr3_debug(ctrl, "step_quot_min=%u, step_quot_max=%u; STEP_QUOT=0x%08X\n",
-+ ctrl->step_quot_init_min, ctrl->step_quot_init_max, val);
-+
-+ /* Configure the CPR sensor ownership */
-+ for (i = 0; i < ctrl->sensor_count; i++)
-+ cpr3_write(ctrl, CPR3_REG_SENSOR_OWNER(i),
-+ ctrl->sensor_owner[i]);
-+
-+ /* Configure per-thread registers */
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ rc = cpr3_regulator_init_thread(&ctrl->thread[i]);
-+ if (rc) {
-+ cpr3_err(ctrl, "CPR thread register initialization failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ }
-+
-+ if (ctrl->supports_hw_closed_loop) {
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK,
-+ ctrl->use_hw_closed_loop
-+ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE
-+ : CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE);
-+ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP,
-+ ctrl->use_hw_closed_loop
-+ ? CPR3_HW_CLOSED_LOOP_ENABLE
-+ : CPR3_HW_CLOSED_LOOP_DISABLE);
-+
-+ cpr3_debug(ctrl, "PD_THROTTLE=0x%08X\n",
-+ ctrl->proc_clock_throttle);
-+ }
-+
-+ if ((ctrl->use_hw_closed_loop ||
-+ ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) &&
-+ ctrl->vdd_limit_regulator) {
-+ rc = regulator_enable(ctrl->vdd_limit_regulator);
-+ if (rc) {
-+ cpr3_err(ctrl, "CPR limit regulator enable failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ }
-+ }
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ rc = cpr3_regulator_init_cpr4(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "CPR4-specific controller initialization failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ }
-+
-+ /* Ensure that all register writes complete before disabling clocks. */
-+ wmb();
-+
-+ cpr3_clock_disable(ctrl);
-+ ctrl->cpr_enabled = false;
-+
-+ if (!ctrl->cpr_allowed_sw || !ctrl->cpr_allowed_hw)
-+ mode = "open-loop";
-+ else if (ctrl->supports_hw_closed_loop)
-+ mode = ctrl->use_hw_closed_loop
-+ ? "HW closed-loop" : "SW closed-loop";
-+ else
-+ mode = "closed-loop";
-+
-+ cpr3_info(ctrl, "Default CPR mode = %s", mode);
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_set_target_quot() - configure the target quotient for each
-+ * RO of the CPR3 thread and set the RO mask
-+ * @thread: Pointer to the CPR3 thread
-+ *
-+ * Return: none
-+ */
-+static void cpr3_regulator_set_target_quot(struct cpr3_thread *thread)
-+{
-+ u32 new_quot, last_quot;
-+ int i;
-+
-+ if (thread->aggr_corner.ro_mask == CPR3_RO_MASK
-+ && thread->last_closed_loop_aggr_corner.ro_mask == CPR3_RO_MASK) {
-+ /* Avoid writing target quotients since all RO's are masked. */
-+ return;
-+ } else if (thread->aggr_corner.ro_mask == CPR3_RO_MASK) {
-+ cpr3_write(thread->ctrl, CPR3_REG_RO_MASK(thread->thread_id),
-+ CPR3_RO_MASK);
-+ thread->last_closed_loop_aggr_corner.ro_mask = CPR3_RO_MASK;
-+ /*
-+ * Only the RO_MASK register needs to be written since all
-+ * RO's are masked.
-+ */
-+ return;
-+ } else if (thread->aggr_corner.ro_mask
-+ != thread->last_closed_loop_aggr_corner.ro_mask) {
-+ cpr3_write(thread->ctrl, CPR3_REG_RO_MASK(thread->thread_id),
-+ thread->aggr_corner.ro_mask);
-+ }
-+
-+ for (i = 0; i < CPR3_RO_COUNT; i++) {
-+ new_quot = thread->aggr_corner.target_quot[i];
-+ last_quot = thread->last_closed_loop_aggr_corner.target_quot[i];
-+ if (new_quot != last_quot)
-+ cpr3_write(thread->ctrl,
-+ CPR3_REG_TARGET_QUOT(thread->thread_id, i),
-+ new_quot);
-+ }
-+
-+ thread->last_closed_loop_aggr_corner = thread->aggr_corner;
-+
-+ return;
-+}
-+
-+/**
-+ * cpr3_update_vreg_closed_loop_volt() - update the last known settled
-+ * closed loop voltage for a CPR3 regulator
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @vdd_volt: Last known settled voltage in microvolts for the
-+ * VDD supply
-+ * @reg_last_measurement: Value read from the LAST_MEASUREMENT register
-+ *
-+ * Return: none
-+ */
-+static void cpr3_update_vreg_closed_loop_volt(struct cpr3_regulator *vreg,
-+ int vdd_volt, u32 reg_last_measurement)
-+{
-+ bool step_dn, step_up, aggr_step_up, aggr_step_dn, aggr_step_mid;
-+ bool valid, pd_valid, saw_error;
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ struct cpr3_corner *corner;
-+ u32 id;
-+
-+ if (vreg->last_closed_loop_corner == CPR3_REGULATOR_CORNER_INVALID)
-+ return;
-+ else
-+ corner = &vreg->corner[vreg->last_closed_loop_corner];
-+
-+ if (vreg->thread->last_closed_loop_aggr_corner.ro_mask
-+ == CPR3_RO_MASK || !vreg->aggregated) {
-+ return;
-+ } else if (!ctrl->cpr_enabled || !ctrl->last_corner_was_closed_loop) {
-+ return;
-+ } else if (ctrl->thread_count == 1
-+ && vdd_volt >= corner->floor_volt
-+ && vdd_volt <= corner->ceiling_volt) {
-+ corner->last_volt = vdd_volt;
-+ cpr3_debug(vreg, "last_volt updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d\n",
-+ vreg->last_closed_loop_corner, corner->last_volt,
-+ vreg->last_closed_loop_corner,
-+ corner->ceiling_volt,
-+ vreg->last_closed_loop_corner,
-+ corner->floor_volt);
-+ return;
-+ } else if (!ctrl->supports_hw_closed_loop) {
-+ return;
-+ } else if (ctrl->ctrl_type != CPR_CTRL_TYPE_CPR3) {
-+ corner->last_volt = vdd_volt;
-+ cpr3_debug(vreg, "last_volt updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d\n",
-+ vreg->last_closed_loop_corner, corner->last_volt,
-+ vreg->last_closed_loop_corner,
-+ corner->ceiling_volt,
-+ vreg->last_closed_loop_corner,
-+ corner->floor_volt);
-+ return;
-+ }
-+
-+ /* CPR clocks are on and HW closed loop is supported */
-+ valid = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_VALID);
-+ if (!valid) {
-+ cpr3_debug(vreg, "CPR_LAST_VALID_MEASUREMENT=0x%X valid bit not set\n",
-+ reg_last_measurement);
-+ return;
-+ }
-+
-+ id = vreg->thread->thread_id;
-+
-+ step_dn
-+ = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_THREAD_DN(id));
-+ step_up
-+ = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_THREAD_UP(id));
-+ aggr_step_dn = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_AGGR_DN);
-+ aggr_step_mid
-+ = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_AGGR_MID);
-+ aggr_step_up = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_AGGR_UP);
-+ saw_error = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_SAW_ERROR);
-+ pd_valid
-+ = !((((reg_last_measurement & CPR3_LAST_MEASUREMENT_PD_BYPASS_MASK)
-+ >> CPR3_LAST_MEASUREMENT_PD_BYPASS_SHIFT)
-+ & vreg->pd_bypass_mask) == vreg->pd_bypass_mask);
-+
-+ if (!pd_valid) {
-+ cpr3_debug(vreg, "CPR_LAST_VALID_MEASUREMENT=0x%X, all power domains bypassed\n",
-+ reg_last_measurement);
-+ return;
-+ } else if (step_dn && step_up) {
-+ cpr3_err(vreg, "both up and down status bits set, CPR_LAST_VALID_MEASUREMENT=0x%X\n",
-+ reg_last_measurement);
-+ return;
-+ } else if (aggr_step_dn && step_dn && vdd_volt < corner->last_volt
-+ && vdd_volt >= corner->floor_volt) {
-+ corner->last_volt = vdd_volt;
-+ } else if (aggr_step_up && step_up && vdd_volt > corner->last_volt
-+ && vdd_volt <= corner->ceiling_volt) {
-+ corner->last_volt = vdd_volt;
-+ } else if (aggr_step_mid
-+ && vdd_volt >= corner->floor_volt
-+ && vdd_volt <= corner->ceiling_volt) {
-+ corner->last_volt = vdd_volt;
-+ } else if (saw_error && (vdd_volt == corner->ceiling_volt
-+ || vdd_volt == corner->floor_volt)) {
-+ corner->last_volt = vdd_volt;
-+ } else {
-+ cpr3_debug(vreg, "last_volt not updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d, vdd_volt=%d, CPR_LAST_VALID_MEASUREMENT=0x%X\n",
-+ vreg->last_closed_loop_corner, corner->last_volt,
-+ vreg->last_closed_loop_corner,
-+ corner->ceiling_volt,
-+ vreg->last_closed_loop_corner, corner->floor_volt,
-+ vdd_volt, reg_last_measurement);
-+ return;
-+ }
-+
-+ cpr3_debug(vreg, "last_volt updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d, CPR_LAST_VALID_MEASUREMENT=0x%X\n",
-+ vreg->last_closed_loop_corner, corner->last_volt,
-+ vreg->last_closed_loop_corner, corner->ceiling_volt,
-+ vreg->last_closed_loop_corner, corner->floor_volt,
-+ reg_last_measurement);
-+}
-+
-+/**
-+ * cpr3_regulator_mem_acc_bhs_used() - determines if mem-acc regulators powered
-+ * through a BHS are associated with the CPR3 controller or any of
-+ * the CPR3 regulators it controls.
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * This function determines if the CPR3 controller or any of its CPR3 regulators
-+ * need to manage mem-acc regulators that are currently powered through a BHS
-+ * and whose corner selection is based upon a particular voltage threshold.
-+ *
-+ * Return: true or false
-+ */
-+static bool cpr3_regulator_mem_acc_bhs_used(struct cpr3_controller *ctrl)
-+{
-+ struct cpr3_regulator *vreg;
-+ int i, j;
-+
-+ if (!ctrl->mem_acc_threshold_volt)
-+ return false;
-+
-+ if (ctrl->mem_acc_regulator)
-+ return true;
-+
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+
-+ if (vreg->mem_acc_regulator)
-+ return true;
-+ }
-+ }
-+
-+ return false;
-+}
-+
-+/**
-+ * cpr3_regulator_config_bhs_mem_acc() - configure the mem-acc regulator
-+ * settings for hardware blocks currently powered through the BHS.
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @new_volt: New voltage in microvolts that VDD supply needs to
-+ * end up at
-+ * @last_volt: Pointer to the last known voltage in microvolts for the
-+ * VDD supply
-+ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max
-+ * corner aggregated from all CPR3 threads managed by the
-+ * CPR3 controller
-+ *
-+ * This function programs the mem-acc regulator corners for CPR3 regulators
-+ * whose LDO regulators are in bypassed state. The function also handles
-+ * CPR3 controllers which utilize mem-acc regulators that operate independently
-+ * from the LDO hardware and that must be programmed when the VDD supply
-+ * crosses a particular voltage threshold.
-+ *
-+ * Return: 0 on success, errno on failure. If the VDD supply voltage is
-+ * modified, last_volt is updated to reflect the new voltage setpoint.
-+ */
-+static int cpr3_regulator_config_bhs_mem_acc(struct cpr3_controller *ctrl,
-+ int new_volt, int *last_volt,
-+ struct cpr3_corner *aggr_corner)
-+{
-+ struct cpr3_regulator *vreg;
-+ int i, j, rc, mem_acc_corn, safe_volt;
-+ int mem_acc_volt = ctrl->mem_acc_threshold_volt;
-+ int ref_volt;
-+
-+ if (!cpr3_regulator_mem_acc_bhs_used(ctrl))
-+ return 0;
-+
-+ ref_volt = ctrl->use_hw_closed_loop ? aggr_corner->floor_volt :
-+ new_volt;
-+
-+ if (((*last_volt < mem_acc_volt && mem_acc_volt <= ref_volt) ||
-+ (*last_volt >= mem_acc_volt && mem_acc_volt > ref_volt))) {
-+ if (ref_volt < *last_volt)
-+ safe_volt = max(mem_acc_volt, aggr_corner->last_volt);
-+ else
-+ safe_volt = max(mem_acc_volt, *last_volt);
-+
-+ rc = regulator_set_voltage(ctrl->vdd_regulator, safe_volt,
-+ new_volt < *last_volt ?
-+ ctrl->aggr_corner.ceiling_volt :
-+ new_volt);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_set_voltage(vdd) == %d failed, rc=%d\n",
-+ safe_volt, rc);
-+ return rc;
-+ }
-+
-+ *last_volt = safe_volt;
-+
-+ mem_acc_corn = ref_volt < mem_acc_volt ?
-+ ctrl->mem_acc_corner_map[CPR3_MEM_ACC_LOW_CORNER] :
-+ ctrl->mem_acc_corner_map[CPR3_MEM_ACC_HIGH_CORNER];
-+
-+ if (ctrl->mem_acc_regulator) {
-+ rc = regulator_set_voltage(ctrl->mem_acc_regulator,
-+ mem_acc_corn, mem_acc_corn);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_set_voltage(mem_acc) == %d failed, rc=%d\n",
-+ mem_acc_corn, rc);
-+ return rc;
-+ }
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+
-+ if (!vreg->mem_acc_regulator)
-+ continue;
-+
-+ rc = regulator_set_voltage(
-+ vreg->mem_acc_regulator, mem_acc_corn,
-+ mem_acc_corn);
-+ if (rc) {
-+ cpr3_err(vreg, "regulator_set_voltage(mem_acc) == %d failed, rc=%d\n",
-+ mem_acc_corn, rc);
-+ return rc;
-+ }
-+ }
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_switch_apm_mode() - switch the mode of the APM controller
-+ * associated with a given CPR3 controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @new_volt: New voltage in microvolts that VDD supply needs to
-+ * end up at
-+ * @last_volt: Pointer to the last known voltage in microvolts for the
-+ * VDD supply
-+ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max
-+ * corner aggregated from all CPR3 threads managed by the
-+ * CPR3 controller
-+ *
-+ * This function requests a switch of the APM mode while guaranteeing
-+ * any LDO regulator hardware requirements are satisfied. The function must
-+ * be called once it is known a new VDD supply setpoint crosses the APM
-+ * voltage threshold.
-+ *
-+ * Return: 0 on success, errno on failure. If the VDD supply voltage is
-+ * modified, last_volt is updated to reflect the new voltage setpoint.
-+ */
-+static int cpr3_regulator_switch_apm_mode(struct cpr3_controller *ctrl,
-+ int new_volt, int *last_volt,
-+ struct cpr3_corner *aggr_corner)
-+{
-+ struct regulator *vdd = ctrl->vdd_regulator;
-+ int apm_volt = ctrl->apm_threshold_volt;
-+ int orig_last_volt = *last_volt;
-+ int rc;
-+
-+ rc = regulator_set_voltage(vdd, apm_volt, apm_volt);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_set_voltage(vdd) == %d failed, rc=%d\n",
-+ apm_volt, rc);
-+ return rc;
-+ }
-+
-+ *last_volt = apm_volt;
-+
-+ rc = msm_apm_set_supply(ctrl->apm, new_volt >= apm_volt
-+ ? ctrl->apm_high_supply : ctrl->apm_low_supply);
-+ if (rc) {
-+ cpr3_err(ctrl, "APM switch failed, rc=%d\n", rc);
-+ /* Roll back the voltage. */
-+ regulator_set_voltage(vdd, orig_last_volt, INT_MAX);
-+ *last_volt = orig_last_volt;
-+ return rc;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_config_voltage_crossings() - configure APM and mem-acc
-+ * settings depending upon a new VDD supply setpoint
-+ *
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @new_volt: New voltage in microvolts that VDD supply needs to
-+ * end up at
-+ * @last_volt: Pointer to the last known voltage in microvolts for the
-+ * VDD supply
-+ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max
-+ * corner aggregated from all CPR3 threads managed by the
-+ * CPR3 controller
-+ *
-+ * This function handles the APM and mem-acc regulator reconfiguration if
-+ * the new VDD supply voltage will result in crossing their respective voltage
-+ * thresholds.
-+ *
-+ * Return: 0 on success, errno on failure. If the VDD supply voltage is
-+ * modified, last_volt is updated to reflect the new voltage setpoint.
-+ */
-+static int cpr3_regulator_config_voltage_crossings(struct cpr3_controller *ctrl,
-+ int new_volt, int *last_volt,
-+ struct cpr3_corner *aggr_corner)
-+{
-+ bool apm_crossing = false, mem_acc_crossing = false;
-+ bool mem_acc_bhs_used;
-+ int apm_volt = ctrl->apm_threshold_volt;
-+ int mem_acc_volt = ctrl->mem_acc_threshold_volt;
-+ int ref_volt, rc;
-+
-+ if (ctrl->apm && apm_volt > 0
-+ && ((*last_volt < apm_volt && apm_volt <= new_volt)
-+ || (*last_volt >= apm_volt && apm_volt > new_volt)))
-+ apm_crossing = true;
-+
-+ mem_acc_bhs_used = cpr3_regulator_mem_acc_bhs_used(ctrl);
-+
-+ ref_volt = ctrl->use_hw_closed_loop ? aggr_corner->floor_volt :
-+ new_volt;
-+
-+ if (mem_acc_bhs_used &&
-+ (((*last_volt < mem_acc_volt && mem_acc_volt <= ref_volt) ||
-+ (*last_volt >= mem_acc_volt && mem_acc_volt > ref_volt))))
-+ mem_acc_crossing = true;
-+
-+ if (apm_crossing && mem_acc_crossing) {
-+ if ((new_volt < *last_volt && apm_volt >= mem_acc_volt) ||
-+ (new_volt >= *last_volt && apm_volt < mem_acc_volt)) {
-+ rc = cpr3_regulator_switch_apm_mode(ctrl, new_volt,
-+ last_volt,
-+ aggr_corner);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to switch APM mode\n");
-+ return rc;
-+ }
-+
-+ rc = cpr3_regulator_config_bhs_mem_acc(ctrl, new_volt,
-+ last_volt, aggr_corner);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to configure BHS mem-acc settings\n");
-+ return rc;
-+ }
-+ } else {
-+ rc = cpr3_regulator_config_bhs_mem_acc(ctrl, new_volt,
-+ last_volt, aggr_corner);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to configure BHS mem-acc settings\n");
-+ return rc;
-+ }
-+
-+ rc = cpr3_regulator_switch_apm_mode(ctrl, new_volt,
-+ last_volt,
-+ aggr_corner);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to switch APM mode\n");
-+ return rc;
-+ }
-+ }
-+ } else if (apm_crossing) {
-+ rc = cpr3_regulator_switch_apm_mode(ctrl, new_volt, last_volt,
-+ aggr_corner);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to switch APM mode\n");
-+ return rc;
-+ }
-+ } else if (mem_acc_crossing) {
-+ rc = cpr3_regulator_config_bhs_mem_acc(ctrl, new_volt,
-+ last_volt, aggr_corner);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to configure BHS mem-acc settings\n");
-+ return rc;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_config_mem_acc() - configure the corner of the mem-acc
-+ * regulator associated with the CPR3 controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max
-+ * corner aggregated from all CPR3 threads managed by the
-+ * CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_config_mem_acc(struct cpr3_controller *ctrl,
-+ struct cpr3_corner *aggr_corner)
-+{
-+ int rc;
-+
-+ if (ctrl->mem_acc_regulator && aggr_corner->mem_acc_volt) {
-+ rc = regulator_set_voltage(ctrl->mem_acc_regulator,
-+ aggr_corner->mem_acc_volt,
-+ aggr_corner->mem_acc_volt);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_set_voltage(mem_acc) == %d failed, rc=%d\n",
-+ aggr_corner->mem_acc_volt, rc);
-+ return rc;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_scale_vdd_voltage() - scale the CPR controlled VDD supply
-+ * voltage to the new level while satisfying any other hardware
-+ * requirements
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @new_volt: New voltage in microvolts that VDD supply needs to end
-+ * up at
-+ * @last_volt: Last known voltage in microvolts for the VDD supply
-+ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max
-+ * corner aggregated from all CPR3 threads managed by the
-+ * CPR3 controller
-+ *
-+ * This function scales the CPR controlled VDD supply voltage from its
-+ * current level to the new voltage that is specified. If the supply is
-+ * configured to use the APM and the APM threshold is crossed as a result of
-+ * the voltage scaling, then this function also stops at the APM threshold,
-+ * switches the APM source, and finally sets the final new voltage.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_scale_vdd_voltage(struct cpr3_controller *ctrl,
-+ int new_volt, int last_volt,
-+ struct cpr3_corner *aggr_corner)
-+{
-+ struct regulator *vdd = ctrl->vdd_regulator;
-+ int rc;
-+
-+ if (new_volt < last_volt) {
-+ rc = cpr3_regulator_config_mem_acc(ctrl, aggr_corner);
-+ if (rc)
-+ return rc;
-+ } else {
-+ /* Increasing VDD voltage */
-+ if (ctrl->system_regulator) {
-+ rc = regulator_set_voltage(ctrl->system_regulator,
-+ aggr_corner->system_volt, INT_MAX);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_set_voltage(system) == %d failed, rc=%d\n",
-+ aggr_corner->system_volt, rc);
-+ return rc;
-+ }
-+ }
-+ }
-+
-+ rc = cpr3_regulator_config_voltage_crossings(ctrl, new_volt, &last_volt,
-+ aggr_corner);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to handle voltage threshold crossing configurations, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ /*
-+ * Subtract a small amount from the min_uV parameter so that the
-+ * set voltage request is not dropped by the framework due to being
-+ * duplicate. This is needed in order to switch from hardware
-+ * closed-loop to open-loop successfully.
-+ */
-+ rc = regulator_set_voltage(vdd, new_volt - (ctrl->cpr_enabled ? 0 : 1),
-+ aggr_corner->ceiling_volt);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_set_voltage(vdd) == %d failed, rc=%d\n",
-+ new_volt, rc);
-+ return rc;
-+ }
-+
-+ if (new_volt == last_volt && ctrl->supports_hw_closed_loop
-+ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ /*
-+ * CPR4 features enforce voltage reprogramming when the last
-+ * set voltage and new set voltage are same. This way, we can
-+ * ensure that SAW PMIC STATUS register is updated with newly
-+ * programmed voltage.
-+ */
-+ rc = regulator_sync_voltage(vdd);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_sync_voltage(vdd) == %d failed, rc=%d\n",
-+ new_volt, rc);
-+ return rc;
-+ }
-+ }
-+
-+ if (new_volt >= last_volt) {
-+ rc = cpr3_regulator_config_mem_acc(ctrl, aggr_corner);
-+ if (rc)
-+ return rc;
-+ } else {
-+ /* Decreasing VDD voltage */
-+ if (ctrl->system_regulator) {
-+ rc = regulator_set_voltage(ctrl->system_regulator,
-+ aggr_corner->system_volt, INT_MAX);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_set_voltage(system) == %d failed, rc=%d\n",
-+ aggr_corner->system_volt, rc);
-+ return rc;
-+ }
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_get_dynamic_floor_volt() - returns the current dynamic floor
-+ * voltage based upon static configurations and the state of all
-+ * power domains during the last CPR measurement
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @reg_last_measurement: Value read from the LAST_MEASUREMENT register
-+ *
-+ * When using HW closed-loop, the dynamic floor voltage is always returned
-+ * regardless of the current state of the power domains.
-+ *
-+ * Return: dynamic floor voltage in microvolts or 0 if dynamic floor is not
-+ * currently required
-+ */
-+static int cpr3_regulator_get_dynamic_floor_volt(struct cpr3_controller *ctrl,
-+ u32 reg_last_measurement)
-+{
-+ int dynamic_floor_volt = 0;
-+ struct cpr3_regulator *vreg;
-+ bool valid, pd_valid;
-+ u32 bypass_bits;
-+ int i, j;
-+
-+ if (!ctrl->supports_hw_closed_loop)
-+ return 0;
-+
-+ if (likely(!ctrl->use_hw_closed_loop)) {
-+ valid = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_VALID);
-+ bypass_bits
-+ = (reg_last_measurement & CPR3_LAST_MEASUREMENT_PD_BYPASS_MASK)
-+ >> CPR3_LAST_MEASUREMENT_PD_BYPASS_SHIFT;
-+ } else {
-+ /*
-+ * Ensure that the dynamic floor voltage is always used for
-+ * HW closed-loop since the conditions below cannot be evaluated
-+ * after each CPR measurement.
-+ */
-+ valid = false;
-+ bypass_bits = 0;
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+
-+ if (!vreg->uses_dynamic_floor)
-+ continue;
-+
-+ pd_valid = !((bypass_bits & vreg->pd_bypass_mask)
-+ == vreg->pd_bypass_mask);
-+
-+ if (!valid || !pd_valid)
-+ dynamic_floor_volt = max(dynamic_floor_volt,
-+ vreg->corner[
-+ vreg->dynamic_floor_corner].last_volt);
-+ }
-+ }
-+
-+ return dynamic_floor_volt;
-+}
-+
-+/**
-+ * cpr3_regulator_max_sdelta_diff() - returns the maximum voltage difference in
-+ * microvolts that can result from different operating conditions
-+ * for the specified sdelta struct
-+ * @sdelta: Pointer to the sdelta structure
-+ * @step_volt: Step size in microvolts between available set
-+ * points of the VDD supply.
-+ *
-+ * Return: voltage difference between the highest and lowest adjustments if
-+ * sdelta and sdelta->table are valid, else 0.
-+ */
-+static int cpr3_regulator_max_sdelta_diff(const struct cpr4_sdelta *sdelta,
-+ int step_volt)
-+{
-+ int i, j, index, sdelta_min = INT_MAX, sdelta_max = INT_MIN;
-+
-+ if (!sdelta || !sdelta->table)
-+ return 0;
-+
-+ for (i = 0; i < sdelta->max_core_count; i++) {
-+ for (j = 0; j < sdelta->temp_band_count; j++) {
-+ index = i * sdelta->temp_band_count + j;
-+ sdelta_min = min(sdelta_min, sdelta->table[index]);
-+ sdelta_max = max(sdelta_max, sdelta->table[index]);
-+ }
-+ }
-+
-+ return (sdelta_max - sdelta_min) * step_volt;
-+}
-+
-+/**
-+ * cpr3_regulator_aggregate_sdelta() - check open-loop voltages of current
-+ * aggregated corner and current corner of a given regulator
-+ * and adjust the sdelta strucuture data of aggregate corner.
-+ * @aggr_corner: Pointer to accumulated aggregated corner which
-+ * is both an input and an output
-+ * @corner: Pointer to the corner to be aggregated with
-+ * aggr_corner
-+ * @step_volt: Step size in microvolts between available set
-+ * points of the VDD supply.
-+ *
-+ * Return: none
-+ */
-+static void cpr3_regulator_aggregate_sdelta(
-+ struct cpr3_corner *aggr_corner,
-+ const struct cpr3_corner *corner, int step_volt)
-+{
-+ struct cpr4_sdelta *aggr_sdelta, *sdelta;
-+ int aggr_core_count, core_count, temp_band_count;
-+ u32 aggr_index, index;
-+ int i, j, sdelta_size, cap_steps, adjust_sdelta;
-+
-+ aggr_sdelta = aggr_corner->sdelta;
-+ sdelta = corner->sdelta;
-+
-+ if (aggr_corner->open_loop_volt < corner->open_loop_volt) {
-+ /*
-+ * Found the new dominant regulator as its open-loop requirement
-+ * is higher than previous dominant regulator. Calculate cap
-+ * voltage to limit the SDELTA values to make sure the runtime
-+ * (Core-count/temp) adjustments do not violate other
-+ * regulators' voltage requirements. Use cpr4_sdelta values of
-+ * new dominant regulator.
-+ */
-+ aggr_sdelta->cap_volt = min(aggr_sdelta->cap_volt,
-+ (corner->open_loop_volt -
-+ aggr_corner->open_loop_volt));
-+
-+ /* Clear old data in the sdelta table */
-+ sdelta_size = aggr_sdelta->max_core_count
-+ * aggr_sdelta->temp_band_count;
-+
-+ if (aggr_sdelta->allow_core_count_adj
-+ || aggr_sdelta->allow_temp_adj)
-+ memset(aggr_sdelta->table, 0, sdelta_size
-+ * sizeof(*aggr_sdelta->table));
-+
-+ if (sdelta->allow_temp_adj || sdelta->allow_core_count_adj) {
-+ /* Copy new data in sdelta table */
-+ sdelta_size = sdelta->max_core_count
-+ * sdelta->temp_band_count;
-+ if (sdelta->table)
-+ memcpy(aggr_sdelta->table, sdelta->table,
-+ sdelta_size * sizeof(*sdelta->table));
-+ }
-+
-+ if (sdelta->allow_boost) {
-+ memcpy(aggr_sdelta->boost_table, sdelta->boost_table,
-+ sdelta->temp_band_count
-+ * sizeof(*sdelta->boost_table));
-+ aggr_sdelta->boost_num_cores = sdelta->boost_num_cores;
-+ } else if (aggr_sdelta->allow_boost) {
-+ for (i = 0; i < aggr_sdelta->temp_band_count; i++) {
-+ adjust_sdelta = (corner->open_loop_volt
-+ - aggr_corner->open_loop_volt)
-+ / step_volt;
-+ aggr_sdelta->boost_table[i] += adjust_sdelta;
-+ aggr_sdelta->boost_table[i]
-+ = min(aggr_sdelta->boost_table[i], 0);
-+ }
-+ }
-+
-+ aggr_corner->open_loop_volt = corner->open_loop_volt;
-+ aggr_sdelta->allow_temp_adj = sdelta->allow_temp_adj;
-+ aggr_sdelta->allow_core_count_adj
-+ = sdelta->allow_core_count_adj;
-+ aggr_sdelta->max_core_count = sdelta->max_core_count;
-+ aggr_sdelta->temp_band_count = sdelta->temp_band_count;
-+ } else if (aggr_corner->open_loop_volt > corner->open_loop_volt) {
-+ /*
-+ * Adjust the cap voltage if the open-loop requirement of new
-+ * regulator is the next highest.
-+ */
-+ aggr_sdelta->cap_volt = min(aggr_sdelta->cap_volt,
-+ (aggr_corner->open_loop_volt
-+ - corner->open_loop_volt));
-+
-+ if (sdelta->allow_boost) {
-+ for (i = 0; i < aggr_sdelta->temp_band_count; i++) {
-+ adjust_sdelta = (aggr_corner->open_loop_volt
-+ - corner->open_loop_volt)
-+ / step_volt;
-+ aggr_sdelta->boost_table[i] =
-+ sdelta->boost_table[i] + adjust_sdelta;
-+ aggr_sdelta->boost_table[i]
-+ = min(aggr_sdelta->boost_table[i], 0);
-+ }
-+ aggr_sdelta->boost_num_cores = sdelta->boost_num_cores;
-+ }
-+ } else {
-+ /*
-+ * Found another dominant regulator with same open-loop
-+ * requirement. Make cap voltage to '0'. Disable core-count
-+ * adjustments as we couldn't support for both regulators.
-+ * Keep enable temp based adjustments if enabled for both
-+ * regulators and choose mininum margin adjustment values
-+ * between them.
-+ */
-+ aggr_sdelta->cap_volt = 0;
-+ aggr_sdelta->allow_core_count_adj = false;
-+
-+ if (aggr_sdelta->allow_temp_adj
-+ && sdelta->allow_temp_adj) {
-+ aggr_core_count = aggr_sdelta->max_core_count - 1;
-+ core_count = sdelta->max_core_count - 1;
-+ temp_band_count = sdelta->temp_band_count;
-+ for (j = 0; j < temp_band_count; j++) {
-+ aggr_index = aggr_core_count * temp_band_count
-+ + j;
-+ index = core_count * temp_band_count + j;
-+ aggr_sdelta->table[aggr_index] =
-+ min(aggr_sdelta->table[aggr_index],
-+ sdelta->table[index]);
-+ }
-+ } else {
-+ aggr_sdelta->allow_temp_adj = false;
-+ }
-+
-+ if (sdelta->allow_boost) {
-+ memcpy(aggr_sdelta->boost_table, sdelta->boost_table,
-+ sdelta->temp_band_count
-+ * sizeof(*sdelta->boost_table));
-+ aggr_sdelta->boost_num_cores = sdelta->boost_num_cores;
-+ }
-+ }
-+
-+ /* Keep non-dominant clients boost enable state */
-+ aggr_sdelta->allow_boost |= sdelta->allow_boost;
-+ if (aggr_sdelta->allow_boost)
-+ aggr_sdelta->allow_core_count_adj = false;
-+
-+ if (aggr_sdelta->cap_volt && !(aggr_sdelta->cap_volt == INT_MAX)) {
-+ core_count = aggr_sdelta->max_core_count;
-+ temp_band_count = aggr_sdelta->temp_band_count;
-+ /*
-+ * Convert cap voltage from uV to PMIC steps and use to limit
-+ * sdelta margin adjustments.
-+ */
-+ cap_steps = aggr_sdelta->cap_volt / step_volt;
-+ for (i = 0; i < core_count; i++)
-+ for (j = 0; j < temp_band_count; j++) {
-+ index = i * temp_band_count + j;
-+ aggr_sdelta->table[index] =
-+ min(aggr_sdelta->table[index],
-+ cap_steps);
-+ }
-+ }
-+}
-+
-+/**
-+ * cpr3_regulator_aggregate_corners() - aggregate two corners together
-+ * @aggr_corner: Pointer to accumulated aggregated corner which
-+ * is both an input and an output
-+ * @corner: Pointer to the corner to be aggregated with
-+ * aggr_corner
-+ * @aggr_quot: Flag indicating that target quotients should be
-+ * aggregated as well.
-+ * @step_volt: Step size in microvolts between available set
-+ * points of the VDD supply.
-+ *
-+ * Return: none
-+ */
-+static void cpr3_regulator_aggregate_corners(struct cpr3_corner *aggr_corner,
-+ const struct cpr3_corner *corner, bool aggr_quot,
-+ int step_volt)
-+{
-+ int i;
-+
-+ aggr_corner->ceiling_volt
-+ = max(aggr_corner->ceiling_volt, corner->ceiling_volt);
-+ aggr_corner->floor_volt
-+ = max(aggr_corner->floor_volt, corner->floor_volt);
-+ aggr_corner->last_volt
-+ = max(aggr_corner->last_volt, corner->last_volt);
-+ aggr_corner->system_volt
-+ = max(aggr_corner->system_volt, corner->system_volt);
-+ aggr_corner->mem_acc_volt
-+ = max(aggr_corner->mem_acc_volt, corner->mem_acc_volt);
-+ aggr_corner->irq_en |= corner->irq_en;
-+ aggr_corner->use_open_loop |= corner->use_open_loop;
-+
-+ if (aggr_quot) {
-+ aggr_corner->ro_mask &= corner->ro_mask;
-+
-+ for (i = 0; i < CPR3_RO_COUNT; i++)
-+ aggr_corner->target_quot[i]
-+ = max(aggr_corner->target_quot[i],
-+ corner->target_quot[i]);
-+ }
-+
-+ if (aggr_corner->sdelta && corner->sdelta
-+ && (aggr_corner->sdelta->table
-+ || aggr_corner->sdelta->boost_table)) {
-+ cpr3_regulator_aggregate_sdelta(aggr_corner, corner, step_volt);
-+ } else {
-+ aggr_corner->open_loop_volt
-+ = max(aggr_corner->open_loop_volt,
-+ corner->open_loop_volt);
-+ }
-+}
-+
-+/**
-+ * cpr3_regulator_update_ctrl_state() - update the state of the CPR controller
-+ * to reflect the corners used by all CPR3 regulators as well as
-+ * the CPR operating mode
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * This function aggregates the CPR parameters for all CPR3 regulators
-+ * associated with the VDD supply. Upon success, it sets the aggregated last
-+ * known good voltage.
-+ *
-+ * The VDD supply voltage will not be physically configured unless this
-+ * condition is met by at least one of the regulators of the controller:
-+ * regulator->vreg_enabled == true &&
-+ * regulator->current_corner != CPR3_REGULATOR_CORNER_INVALID
-+ *
-+ * CPR registers for the controller and each thread are updated as long as
-+ * ctrl->cpr_enabled == true.
-+ *
-+ * Note, CPR3 controller lock must be held by the caller.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int _cpr3_regulator_update_ctrl_state(struct cpr3_controller *ctrl)
-+{
-+ struct cpr3_corner aggr_corner = {};
-+ struct cpr3_thread *thread;
-+ struct cpr3_regulator *vreg;
-+ struct cpr4_sdelta *sdelta;
-+ bool valid = false;
-+ bool thread_valid;
-+ int i, j, rc, new_volt, vdd_volt, dynamic_floor_volt, last_corner_volt;
-+ u32 reg_last_measurement = 0, sdelta_size;
-+ int *sdelta_table, *boost_table;
-+
-+ last_corner_volt = 0;
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ rc = cpr3_ctrl_clear_cpr4_config(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ }
-+
-+ cpr3_ctrl_loop_disable(ctrl);
-+
-+ vdd_volt = regulator_get_voltage(ctrl->vdd_regulator);
-+ if (vdd_volt < 0) {
-+ cpr3_err(ctrl, "regulator_get_voltage(vdd) failed, rc=%d\n",
-+ vdd_volt);
-+ return vdd_volt;
-+ }
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ /*
-+ * Save aggregated corner open-loop voltage which was programmed
-+ * during last corner switch which is used when programming new
-+ * aggregated corner open-loop voltage.
-+ */
-+ last_corner_volt = ctrl->aggr_corner.open_loop_volt;
-+ }
-+
-+ if (ctrl->cpr_enabled && ctrl->use_hw_closed_loop &&
-+ ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3)
-+ reg_last_measurement
-+ = cpr3_read(ctrl, CPR3_REG_LAST_MEASUREMENT);
-+
-+ aggr_corner.sdelta = ctrl->aggr_corner.sdelta;
-+ if (aggr_corner.sdelta) {
-+ sdelta = aggr_corner.sdelta;
-+ sdelta_table = sdelta->table;
-+ if (sdelta_table) {
-+ sdelta_size = sdelta->max_core_count *
-+ sdelta->temp_band_count;
-+ memset(sdelta_table, 0, sdelta_size
-+ * sizeof(*sdelta_table));
-+ }
-+
-+ boost_table = sdelta->boost_table;
-+ if (boost_table)
-+ memset(boost_table, 0, sdelta->temp_band_count
-+ * sizeof(*boost_table));
-+
-+ memset(sdelta, 0, sizeof(*sdelta));
-+ sdelta->table = sdelta_table;
-+ sdelta->cap_volt = INT_MAX;
-+ sdelta->boost_table = boost_table;
-+ }
-+
-+ /* Aggregate the requests of all threads */
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ thread = &ctrl->thread[i];
-+ thread_valid = false;
-+
-+ sdelta = thread->aggr_corner.sdelta;
-+ if (sdelta) {
-+ sdelta_table = sdelta->table;
-+ if (sdelta_table) {
-+ sdelta_size = sdelta->max_core_count *
-+ sdelta->temp_band_count;
-+ memset(sdelta_table, 0, sdelta_size
-+ * sizeof(*sdelta_table));
-+ }
-+
-+ boost_table = sdelta->boost_table;
-+ if (boost_table)
-+ memset(boost_table, 0, sdelta->temp_band_count
-+ * sizeof(*boost_table));
-+
-+ memset(sdelta, 0, sizeof(*sdelta));
-+ sdelta->table = sdelta_table;
-+ sdelta->cap_volt = INT_MAX;
-+ sdelta->boost_table = boost_table;
-+ }
-+
-+ memset(&thread->aggr_corner, 0, sizeof(thread->aggr_corner));
-+ thread->aggr_corner.sdelta = sdelta;
-+ thread->aggr_corner.ro_mask = CPR3_RO_MASK;
-+
-+ for (j = 0; j < thread->vreg_count; j++) {
-+ vreg = &thread->vreg[j];
-+
-+ if (ctrl->cpr_enabled && ctrl->use_hw_closed_loop)
-+ cpr3_update_vreg_closed_loop_volt(vreg,
-+ vdd_volt, reg_last_measurement);
-+
-+ if (!vreg->vreg_enabled
-+ || vreg->current_corner
-+ == CPR3_REGULATOR_CORNER_INVALID) {
-+ /* Cannot participate in aggregation. */
-+ vreg->aggregated = false;
-+ continue;
-+ } else {
-+ vreg->aggregated = true;
-+ thread_valid = true;
-+ }
-+
-+ cpr3_regulator_aggregate_corners(&thread->aggr_corner,
-+ &vreg->corner[vreg->current_corner],
-+ true, ctrl->step_volt);
-+ }
-+
-+ valid |= thread_valid;
-+
-+ if (thread_valid)
-+ cpr3_regulator_aggregate_corners(&aggr_corner,
-+ &thread->aggr_corner,
-+ false, ctrl->step_volt);
-+ }
-+
-+ if (valid && ctrl->cpr_allowed_hw && ctrl->cpr_allowed_sw) {
-+ rc = cpr3_closed_loop_enable(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not enable CPR, rc=%d\n", rc);
-+ return rc;
-+ }
-+ } else {
-+ rc = cpr3_closed_loop_disable(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not disable CPR, rc=%d\n", rc);
-+ return rc;
-+ }
-+ }
-+
-+ /* No threads are enabled with a valid corner so exit. */
-+ if (!valid)
-+ return 0;
-+
-+ /*
-+ * When using CPR hardware closed-loop, the voltage may vary anywhere
-+ * between the floor and ceiling voltage without software notification.
-+ * Therefore, it is required that the floor to ceiling range for the
-+ * aggregated corner not intersect the APM threshold voltage. Adjust
-+ * the floor to ceiling range if this requirement is violated.
-+ *
-+ * The following algorithm is applied in the case that
-+ * floor < threshold <= ceiling:
-+ * if open_loop >= threshold - adj, then floor = threshold
-+ * else ceiling = threshold - step
-+ * where adj = an adjustment factor to ensure sufficient voltage margin
-+ * and step = VDD output step size
-+ *
-+ * The open-loop and last known voltages are also bounded by the new
-+ * floor or ceiling value as needed.
-+ */
-+ if (ctrl->use_hw_closed_loop
-+ && aggr_corner.ceiling_volt >= ctrl->apm_threshold_volt
-+ && aggr_corner.floor_volt < ctrl->apm_threshold_volt) {
-+
-+ if (aggr_corner.open_loop_volt
-+ >= ctrl->apm_threshold_volt - ctrl->apm_adj_volt)
-+ aggr_corner.floor_volt = ctrl->apm_threshold_volt;
-+ else
-+ aggr_corner.ceiling_volt
-+ = ctrl->apm_threshold_volt - ctrl->step_volt;
-+
-+ aggr_corner.last_volt
-+ = max(aggr_corner.last_volt, aggr_corner.floor_volt);
-+ aggr_corner.last_volt
-+ = min(aggr_corner.last_volt, aggr_corner.ceiling_volt);
-+ aggr_corner.open_loop_volt
-+ = max(aggr_corner.open_loop_volt, aggr_corner.floor_volt);
-+ aggr_corner.open_loop_volt
-+ = min(aggr_corner.open_loop_volt, aggr_corner.ceiling_volt);
-+ }
-+
-+ if (ctrl->use_hw_closed_loop
-+ && aggr_corner.ceiling_volt >= ctrl->mem_acc_threshold_volt
-+ && aggr_corner.floor_volt < ctrl->mem_acc_threshold_volt) {
-+ aggr_corner.floor_volt = ctrl->mem_acc_threshold_volt;
-+ aggr_corner.last_volt = max(aggr_corner.last_volt,
-+ aggr_corner.floor_volt);
-+ aggr_corner.open_loop_volt = max(aggr_corner.open_loop_volt,
-+ aggr_corner.floor_volt);
-+ }
-+
-+ if (ctrl->use_hw_closed_loop) {
-+ dynamic_floor_volt
-+ = cpr3_regulator_get_dynamic_floor_volt(ctrl,
-+ reg_last_measurement);
-+ if (aggr_corner.floor_volt < dynamic_floor_volt) {
-+ aggr_corner.floor_volt = dynamic_floor_volt;
-+ aggr_corner.last_volt = max(aggr_corner.last_volt,
-+ aggr_corner.floor_volt);
-+ aggr_corner.open_loop_volt
-+ = max(aggr_corner.open_loop_volt,
-+ aggr_corner.floor_volt);
-+ aggr_corner.ceiling_volt = max(aggr_corner.ceiling_volt,
-+ aggr_corner.floor_volt);
-+ }
-+ }
-+
-+ if (ctrl->cpr_enabled && ctrl->last_corner_was_closed_loop) {
-+ /*
-+ * Always program open-loop voltage for CPR4 controllers which
-+ * support hardware closed-loop. Storing the last closed loop
-+ * voltage in corner structure can still help with debugging.
-+ */
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3)
-+ new_volt = aggr_corner.last_volt;
-+ else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4
-+ && ctrl->supports_hw_closed_loop)
-+ new_volt = aggr_corner.open_loop_volt;
-+ else
-+ new_volt = min(aggr_corner.last_volt +
-+ cpr3_regulator_max_sdelta_diff(aggr_corner.sdelta,
-+ ctrl->step_volt),
-+ aggr_corner.ceiling_volt);
-+
-+ aggr_corner.last_volt = new_volt;
-+ } else {
-+ new_volt = aggr_corner.open_loop_volt;
-+ aggr_corner.last_volt = aggr_corner.open_loop_volt;
-+ }
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4
-+ && ctrl->supports_hw_closed_loop) {
-+ /*
-+ * Store last aggregated corner open-loop voltage in vdd_volt
-+ * which is used when programming current aggregated corner
-+ * required voltage.
-+ */
-+ vdd_volt = last_corner_volt;
-+ }
-+
-+ cpr3_debug(ctrl, "setting new voltage=%d uV\n", new_volt);
-+ rc = cpr3_regulator_scale_vdd_voltage(ctrl, new_volt,
-+ vdd_volt, &aggr_corner);
-+ if (rc) {
-+ cpr3_err(ctrl, "vdd voltage scaling failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ /* Only update registers if CPR is enabled. */
-+ if (ctrl->cpr_enabled) {
-+ if (ctrl->use_hw_closed_loop) {
-+ /* Hardware closed-loop */
-+
-+ /* Set ceiling and floor limits in hardware */
-+ rc = regulator_set_voltage(ctrl->vdd_limit_regulator,
-+ aggr_corner.floor_volt,
-+ aggr_corner.ceiling_volt);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not configure HW closed-loop voltage limits, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ } else {
-+ /* Software closed-loop */
-+
-+ /*
-+ * Disable UP or DOWN interrupts when at ceiling or
-+ * floor respectively.
-+ */
-+ if (new_volt == aggr_corner.floor_volt)
-+ aggr_corner.irq_en &= ~CPR3_IRQ_DOWN;
-+ if (new_volt == aggr_corner.ceiling_volt)
-+ aggr_corner.irq_en &= ~CPR3_IRQ_UP;
-+
-+ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR,
-+ CPR3_IRQ_UP | CPR3_IRQ_DOWN);
-+ cpr3_write(ctrl, CPR3_REG_IRQ_EN, aggr_corner.irq_en);
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ cpr3_regulator_set_target_quot(&ctrl->thread[i]);
-+
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+
-+ if (vreg->vreg_enabled)
-+ vreg->last_closed_loop_corner
-+ = vreg->current_corner;
-+ }
-+ }
-+
-+ if (ctrl->proc_clock_throttle) {
-+ if (aggr_corner.ceiling_volt > aggr_corner.floor_volt
-+ && (ctrl->use_hw_closed_loop
-+ || new_volt < aggr_corner.ceiling_volt))
-+ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE,
-+ ctrl->proc_clock_throttle);
-+ else
-+ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE,
-+ CPR3_PD_THROTTLE_DISABLE);
-+ }
-+
-+ /*
-+ * Ensure that all CPR register writes complete before
-+ * re-enabling CPR loop operation.
-+ */
-+ wmb();
-+ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4
-+ && ctrl->vdd_limit_regulator) {
-+ /* Set ceiling and floor limits in hardware */
-+ rc = regulator_set_voltage(ctrl->vdd_limit_regulator,
-+ aggr_corner.floor_volt,
-+ aggr_corner.ceiling_volt);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not configure HW closed-loop voltage limits, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ }
-+
-+ ctrl->aggr_corner = aggr_corner;
-+
-+ if (ctrl->allow_core_count_adj || ctrl->allow_temp_adj
-+ || ctrl->allow_boost) {
-+ rc = cpr3_controller_program_sdelta(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to program sdelta, rc=%d\n", rc);
-+ return rc;
-+ }
-+ }
-+
-+ /*
-+ * Only enable the CPR controller if it is possible to set more than
-+ * one vdd-supply voltage.
-+ */
-+ if (aggr_corner.ceiling_volt > aggr_corner.floor_volt &&
-+ !aggr_corner.use_open_loop)
-+ cpr3_ctrl_loop_enable(ctrl);
-+
-+ ctrl->last_corner_was_closed_loop = ctrl->cpr_enabled;
-+ cpr3_debug(ctrl, "CPR configuration updated\n");
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_wait_for_idle() - wait for the CPR controller to no longer be
-+ * busy
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @max_wait_ns: Max wait time in nanoseconds
-+ *
-+ * Return: 0 on success or -ETIMEDOUT if the controller was still busy after
-+ * the maximum delay time
-+ */
-+static int cpr3_regulator_wait_for_idle(struct cpr3_controller *ctrl,
-+ s64 max_wait_ns)
-+{
-+ ktime_t start, end;
-+ s64 time_ns;
-+ u32 reg;
-+
-+ /*
-+ * Ensure that all previous CPR register writes have completed before
-+ * checking the status register.
-+ */
-+ mb();
-+
-+ start = ktime_get();
-+ do {
-+ end = ktime_get();
-+ time_ns = ktime_to_ns(ktime_sub(end, start));
-+ if (time_ns > max_wait_ns) {
-+ cpr3_err(ctrl, "CPR controller still busy after %lld us\n",
-+ div_s64(time_ns, 1000));
-+ return -ETIMEDOUT;
-+ }
-+ usleep_range(50, 100);
-+ reg = cpr3_read(ctrl, CPR3_REG_CPR_STATUS);
-+ } while (reg & CPR3_CPR_STATUS_BUSY_MASK);
-+
-+ return 0;
-+}
-+
-+/**
-+ * cmp_int() - int comparison function to be passed into the sort() function
-+ * which leads to ascending sorting
-+ * @a: First int value
-+ * @b: Second int value
-+ *
-+ * Return: >0 if a > b, 0 if a == b, <0 if a < b
-+ */
-+static int cmp_int(const void *a, const void *b)
-+{
-+ return *(int *)a - *(int *)b;
-+}
-+
-+/**
-+ * cpr3_regulator_measure_aging() - measure the quotient difference for the
-+ * specified CPR aging sensor
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @aging_sensor: Aging sensor to measure
-+ *
-+ * Note that vdd-supply must be configured to the aging reference voltage before
-+ * calling this function.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_measure_aging(struct cpr3_controller *ctrl,
-+ struct cpr3_aging_sensor_info *aging_sensor)
-+{
-+ u32 mask, reg, result, quot_min, quot_max, sel_min, sel_max;
-+ u32 quot_min_scaled, quot_max_scaled;
-+ u32 gcnt, gcnt_ref, gcnt0_restore, gcnt1_restore, irq_restore;
-+ u32 ro_mask_restore, cont_dly_restore, up_down_dly_restore = 0;
-+ int quot_delta, quot_delta_scaled, quot_delta_scaled_sum;
-+ int *quot_delta_results;
-+ int rc, rc2, i, aging_measurement_count, filtered_count;
-+ bool is_aging_measurement;
-+
-+ quot_delta_results = kcalloc(CPR3_AGING_MEASUREMENT_ITERATIONS,
-+ sizeof(*quot_delta_results), GFP_KERNEL);
-+ if (!quot_delta_results)
-+ return -ENOMEM;
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ rc = cpr3_ctrl_clear_cpr4_config(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n",
-+ rc);
-+ kfree(quot_delta_results);
-+ return rc;
-+ }
-+ }
-+
-+ cpr3_ctrl_loop_disable(ctrl);
-+
-+ /* Enable up, down, and mid CPR interrupts */
-+ irq_restore = cpr3_read(ctrl, CPR3_REG_IRQ_EN);
-+ cpr3_write(ctrl, CPR3_REG_IRQ_EN,
-+ CPR3_IRQ_UP | CPR3_IRQ_DOWN | CPR3_IRQ_MID);
-+
-+ /* Ensure that the aging sensor is assigned to CPR thread 0 */
-+ cpr3_write(ctrl, CPR3_REG_SENSOR_OWNER(aging_sensor->sensor_id), 0);
-+
-+ /* Switch from HW to SW closed-loop if necessary */
-+ if (ctrl->supports_hw_closed_loop) {
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK,
-+ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE);
-+ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP,
-+ CPR3_HW_CLOSED_LOOP_DISABLE);
-+ }
-+ }
-+
-+ /* Configure the GCNT for RO0 and RO1 that are used for aging */
-+ gcnt0_restore = cpr3_read(ctrl, CPR3_REG_GCNT(0));
-+ gcnt1_restore = cpr3_read(ctrl, CPR3_REG_GCNT(1));
-+ gcnt_ref = cpr3_regulator_get_gcnt(ctrl);
-+ gcnt = gcnt_ref * 3 / 2;
-+ cpr3_write(ctrl, CPR3_REG_GCNT(0), gcnt);
-+ cpr3_write(ctrl, CPR3_REG_GCNT(1), gcnt);
-+
-+ /* Unmask all RO's */
-+ ro_mask_restore = cpr3_read(ctrl, CPR3_REG_RO_MASK(0));
-+ cpr3_write(ctrl, CPR3_REG_RO_MASK(0), 0);
-+
-+ /*
-+ * Mask all sensors except for the one to measure and bypass all
-+ * sensors in collapsible domains.
-+ */
-+ for (i = 0; i <= ctrl->sensor_count / 32; i++) {
-+ mask = GENMASK(min(31, ctrl->sensor_count - i * 32), 0);
-+ if (aging_sensor->sensor_id / 32 >= i
-+ && aging_sensor->sensor_id / 32 < (i + 1))
-+ mask &= ~BIT(aging_sensor->sensor_id % 32);
-+ cpr3_write(ctrl, CPR3_REG_SENSOR_MASK_WRITE_BANK(i), mask);
-+ cpr3_write(ctrl, CPR3_REG_SENSOR_BYPASS_WRITE_BANK(i),
-+ aging_sensor->bypass_mask[i]);
-+ }
-+
-+ /* Set CPR loop delays to 0 us */
-+ if (ctrl->supports_hw_closed_loop
-+ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ cont_dly_restore = cpr3_read(ctrl, CPR3_REG_CPR_TIMER_MID_CONT);
-+ up_down_dly_restore = cpr3_read(ctrl,
-+ CPR3_REG_CPR_TIMER_UP_DN_CONT);
-+ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_MID_CONT, 0);
-+ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_UP_DN_CONT, 0);
-+ } else {
-+ cont_dly_restore = cpr3_read(ctrl,
-+ CPR3_REG_CPR_TIMER_AUTO_CONT);
-+ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_AUTO_CONT, 0);
-+ }
-+
-+ /* Set count mode to all-at-once min with no repeat */
-+ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL,
-+ CPR3_CPR_CTL_COUNT_MODE_MASK | CPR3_CPR_CTL_COUNT_REPEAT_MASK,
-+ CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN
-+ << CPR3_CPR_CTL_COUNT_MODE_SHIFT);
-+
-+ cpr3_ctrl_loop_enable(ctrl);
-+
-+ rc = cpr3_regulator_wait_for_idle(ctrl,
-+ CPR3_AGING_MEASUREMENT_TIMEOUT_NS);
-+ if (rc)
-+ goto cleanup;
-+
-+ /* Set count mode to all-at-once aging */
-+ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, CPR3_CPR_CTL_COUNT_MODE_MASK,
-+ CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE
-+ << CPR3_CPR_CTL_COUNT_MODE_SHIFT);
-+
-+ aging_measurement_count = 0;
-+ for (i = 0; i < CPR3_AGING_MEASUREMENT_ITERATIONS; i++) {
-+ /* Send CONT_NACK */
-+ cpr3_write(ctrl, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_NACK);
-+
-+ rc = cpr3_regulator_wait_for_idle(ctrl,
-+ CPR3_AGING_MEASUREMENT_TIMEOUT_NS);
-+ if (rc)
-+ goto cleanup;
-+
-+ /* Check for PAGE_IS_AGE flag in status register */
-+ reg = cpr3_read(ctrl, CPR3_REG_CPR_STATUS);
-+ is_aging_measurement
-+ = reg & CPR3_CPR_STATUS_AGING_MEASUREMENT_MASK;
-+
-+ /* Read CPR measurement results */
-+ result = cpr3_read(ctrl, CPR3_REG_RESULT1(0));
-+ quot_min = (result & CPR3_RESULT1_QUOT_MIN_MASK)
-+ >> CPR3_RESULT1_QUOT_MIN_SHIFT;
-+ quot_max = (result & CPR3_RESULT1_QUOT_MAX_MASK)
-+ >> CPR3_RESULT1_QUOT_MAX_SHIFT;
-+ sel_min = (result & CPR3_RESULT1_RO_MIN_MASK)
-+ >> CPR3_RESULT1_RO_MIN_SHIFT;
-+ sel_max = (result & CPR3_RESULT1_RO_MAX_MASK)
-+ >> CPR3_RESULT1_RO_MAX_SHIFT;
-+
-+ /*
-+ * Scale the quotients so that they are equivalent to the fused
-+ * values. This accounts for the difference in measurement
-+ * interval times.
-+ */
-+ quot_min_scaled = quot_min * (gcnt_ref + 1) / (gcnt + 1);
-+ quot_max_scaled = quot_max * (gcnt_ref + 1) / (gcnt + 1);
-+
-+ if (sel_max == 1) {
-+ quot_delta = quot_max - quot_min;
-+ quot_delta_scaled = quot_max_scaled - quot_min_scaled;
-+ } else {
-+ quot_delta = quot_min - quot_max;
-+ quot_delta_scaled = quot_min_scaled - quot_max_scaled;
-+ }
-+
-+ if (is_aging_measurement)
-+ quot_delta_results[aging_measurement_count++]
-+ = quot_delta_scaled;
-+
-+ cpr3_debug(ctrl, "aging results: page_is_age=%u, sel_min=%u, sel_max=%u, quot_min=%u, quot_max=%u, quot_delta=%d, quot_min_scaled=%u, quot_max_scaled=%u, quot_delta_scaled=%d\n",
-+ is_aging_measurement, sel_min, sel_max, quot_min,
-+ quot_max, quot_delta, quot_min_scaled, quot_max_scaled,
-+ quot_delta_scaled);
-+ }
-+
-+ filtered_count
-+ = aging_measurement_count - CPR3_AGING_MEASUREMENT_FILTER * 2;
-+ if (filtered_count > 0) {
-+ sort(quot_delta_results, aging_measurement_count,
-+ sizeof(*quot_delta_results), cmp_int, NULL);
-+
-+ quot_delta_scaled_sum = 0;
-+ for (i = 0; i < filtered_count; i++)
-+ quot_delta_scaled_sum
-+ += quot_delta_results[i
-+ + CPR3_AGING_MEASUREMENT_FILTER];
-+
-+ aging_sensor->measured_quot_diff
-+ = quot_delta_scaled_sum / filtered_count;
-+ cpr3_info(ctrl, "average quotient delta=%d (count=%d)\n",
-+ aging_sensor->measured_quot_diff,
-+ filtered_count);
-+ } else {
-+ cpr3_err(ctrl, "%d aging measurements completed after %d iterations\n",
-+ aging_measurement_count,
-+ CPR3_AGING_MEASUREMENT_ITERATIONS);
-+ rc = -EBUSY;
-+ }
-+
-+cleanup:
-+ kfree(quot_delta_results);
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ rc2 = cpr3_ctrl_clear_cpr4_config(ctrl);
-+ if (rc2) {
-+ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n",
-+ rc2);
-+ rc = rc2;
-+ }
-+ }
-+
-+ cpr3_ctrl_loop_disable(ctrl);
-+
-+ cpr3_write(ctrl, CPR3_REG_IRQ_EN, irq_restore);
-+
-+ cpr3_write(ctrl, CPR3_REG_RO_MASK(0), ro_mask_restore);
-+
-+ cpr3_write(ctrl, CPR3_REG_GCNT(0), gcnt0_restore);
-+ cpr3_write(ctrl, CPR3_REG_GCNT(1), gcnt1_restore);
-+
-+ if (ctrl->supports_hw_closed_loop
-+ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_MID_CONT, cont_dly_restore);
-+ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_UP_DN_CONT,
-+ up_down_dly_restore);
-+ } else {
-+ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_AUTO_CONT,
-+ cont_dly_restore);
-+ }
-+
-+ for (i = 0; i <= ctrl->sensor_count / 32; i++) {
-+ cpr3_write(ctrl, CPR3_REG_SENSOR_MASK_WRITE_BANK(i), 0);
-+ cpr3_write(ctrl, CPR3_REG_SENSOR_BYPASS_WRITE_BANK(i), 0);
-+ }
-+
-+ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL,
-+ CPR3_CPR_CTL_COUNT_MODE_MASK | CPR3_CPR_CTL_COUNT_REPEAT_MASK,
-+ (ctrl->count_mode << CPR3_CPR_CTL_COUNT_MODE_SHIFT)
-+ | (ctrl->count_repeat << CPR3_CPR_CTL_COUNT_REPEAT_SHIFT));
-+
-+ cpr3_write(ctrl, CPR3_REG_SENSOR_OWNER(aging_sensor->sensor_id),
-+ ctrl->sensor_owner[aging_sensor->sensor_id]);
-+
-+ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR,
-+ CPR3_IRQ_UP | CPR3_IRQ_DOWN | CPR3_IRQ_MID);
-+
-+ if (ctrl->supports_hw_closed_loop) {
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK,
-+ ctrl->use_hw_closed_loop
-+ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE
-+ : CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE);
-+ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP,
-+ ctrl->use_hw_closed_loop
-+ ? CPR3_HW_CLOSED_LOOP_ENABLE
-+ : CPR3_HW_CLOSED_LOOP_DISABLE);
-+ }
-+ }
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_regulator_readjust_volt_and_quot() - readjust the target quotients as
-+ * well as the floor, ceiling, and open-loop voltages for the
-+ * regulator by removing the old adjustment and adding the new one
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @old_adjust_volt: Old aging adjustment voltage in microvolts
-+ * @new_adjust_volt: New aging adjustment voltage in microvolts
-+ *
-+ * Also reset the cached closed loop voltage (last_volt) to equal the open-loop
-+ * voltage for each corner.
-+ *
-+ * Return: None
-+ */
-+static void cpr3_regulator_readjust_volt_and_quot(struct cpr3_regulator *vreg,
-+ int old_adjust_volt, int new_adjust_volt)
-+{
-+ unsigned long long temp;
-+ int i, j, old_volt, new_volt, rounded_volt;
-+
-+ if (!vreg->aging_allowed)
-+ return;
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ temp = (unsigned long long)old_adjust_volt
-+ * (unsigned long long)vreg->corner[i].aging_derate;
-+ do_div(temp, 1000);
-+ old_volt = temp;
-+
-+ temp = (unsigned long long)new_adjust_volt
-+ * (unsigned long long)vreg->corner[i].aging_derate;
-+ do_div(temp, 1000);
-+ new_volt = temp;
-+
-+ old_volt = min(vreg->aging_max_adjust_volt, old_volt);
-+ new_volt = min(vreg->aging_max_adjust_volt, new_volt);
-+
-+ for (j = 0; j < CPR3_RO_COUNT; j++) {
-+ if (vreg->corner[i].target_quot[j] != 0) {
-+ vreg->corner[i].target_quot[j]
-+ += cpr3_quot_adjustment(
-+ vreg->corner[i].ro_scale[j],
-+ new_volt)
-+ - cpr3_quot_adjustment(
-+ vreg->corner[i].ro_scale[j],
-+ old_volt);
-+ }
-+ }
-+
-+ rounded_volt = CPR3_ROUND(new_volt,
-+ vreg->thread->ctrl->step_volt);
-+
-+ if (!vreg->aging_allow_open_loop_adj)
-+ rounded_volt = 0;
-+
-+ vreg->corner[i].ceiling_volt
-+ = vreg->corner[i].unaged_ceiling_volt + rounded_volt;
-+ vreg->corner[i].ceiling_volt = min(vreg->corner[i].ceiling_volt,
-+ vreg->corner[i].abs_ceiling_volt);
-+ vreg->corner[i].floor_volt
-+ = vreg->corner[i].unaged_floor_volt + rounded_volt;
-+ vreg->corner[i].floor_volt = min(vreg->corner[i].floor_volt,
-+ vreg->corner[i].ceiling_volt);
-+ vreg->corner[i].open_loop_volt
-+ = vreg->corner[i].unaged_open_loop_volt + rounded_volt;
-+ vreg->corner[i].open_loop_volt
-+ = min(vreg->corner[i].open_loop_volt,
-+ vreg->corner[i].ceiling_volt);
-+
-+ vreg->corner[i].last_volt = vreg->corner[i].open_loop_volt;
-+
-+ cpr3_debug(vreg, "corner %d: applying %d uV closed-loop and %d uV open-loop voltage margin adjustment\n",
-+ i, new_volt, rounded_volt);
-+ }
-+}
-+
-+/**
-+ * cpr3_regulator_set_aging_ref_adjustment() - adjust target quotients for the
-+ * regulators managed by this CPR controller to account for aging
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @ref_adjust_volt: New aging reference adjustment voltage in microvolts to
-+ * apply to all regulators managed by this CPR controller
-+ *
-+ * The existing aging adjustment as defined by ctrl->aging_ref_adjust_volt is
-+ * first removed and then the adjustment is applied. Lastly, the value of
-+ * ctrl->aging_ref_adjust_volt is updated to ref_adjust_volt.
-+ */
-+static void cpr3_regulator_set_aging_ref_adjustment(
-+ struct cpr3_controller *ctrl, int ref_adjust_volt)
-+{
-+ struct cpr3_regulator *vreg;
-+ int i, j;
-+
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+ cpr3_regulator_readjust_volt_and_quot(vreg,
-+ ctrl->aging_ref_adjust_volt, ref_adjust_volt);
-+ }
-+ }
-+
-+ ctrl->aging_ref_adjust_volt = ref_adjust_volt;
-+}
-+
-+/**
-+ * cpr3_regulator_aging_adjust() - adjust the target quotients for regulators
-+ * based on the output of CPR aging sensors
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_aging_adjust(struct cpr3_controller *ctrl)
-+{
-+ struct cpr3_regulator *vreg;
-+ struct cpr3_corner restore_aging_corner;
-+ struct cpr3_corner *corner;
-+ int *restore_current_corner;
-+ bool *restore_vreg_enabled;
-+ int i, j, id, rc, rc2, vreg_count, aging_volt, max_aging_volt = 0;
-+ u32 reg;
-+
-+ if (!ctrl->aging_required || !ctrl->cpr_enabled
-+ || ctrl->aggr_corner.ceiling_volt == 0
-+ || ctrl->aggr_corner.ceiling_volt > ctrl->aging_ref_volt)
-+ return 0;
-+
-+ for (i = 0, vreg_count = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+ vreg_count++;
-+
-+ if (vreg->aging_allowed && vreg->vreg_enabled
-+ && vreg->current_corner > vreg->aging_corner)
-+ return 0;
-+ }
-+ }
-+
-+ /* Verify that none of the aging sensors are currently masked. */
-+ for (i = 0; i < ctrl->aging_sensor_count; i++) {
-+ id = ctrl->aging_sensor[i].sensor_id;
-+ reg = cpr3_read(ctrl, CPR3_REG_SENSOR_MASK_READ(id));
-+ if (reg & BIT(id % 32))
-+ return 0;
-+ }
-+
-+ /*
-+ * Verify that the aging possible register (if specified) has an
-+ * acceptable value.
-+ */
-+ if (ctrl->aging_possible_reg) {
-+ reg = readl_relaxed(ctrl->aging_possible_reg);
-+ reg &= ctrl->aging_possible_mask;
-+ if (reg != ctrl->aging_possible_val)
-+ return 0;
-+ }
-+
-+ restore_current_corner = kcalloc(vreg_count,
-+ sizeof(*restore_current_corner), GFP_KERNEL);
-+ restore_vreg_enabled = kcalloc(vreg_count,
-+ sizeof(*restore_vreg_enabled), GFP_KERNEL);
-+ if (!restore_current_corner || !restore_vreg_enabled) {
-+ kfree(restore_current_corner);
-+ kfree(restore_vreg_enabled);
-+ return -ENOMEM;
-+ }
-+
-+ /* Force all regulators to the aging corner */
-+ for (i = 0, vreg_count = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++, vreg_count++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+
-+ restore_current_corner[vreg_count]
-+ = vreg->current_corner;
-+ restore_vreg_enabled[vreg_count]
-+ = vreg->vreg_enabled;
-+
-+ vreg->current_corner = vreg->aging_corner;
-+ vreg->vreg_enabled = true;
-+ }
-+ }
-+
-+ /* Force one of the regulators to require the aging reference voltage */
-+ vreg = &ctrl->thread[0].vreg[0];
-+ corner = &vreg->corner[vreg->current_corner];
-+ restore_aging_corner = *corner;
-+ corner->ceiling_volt = ctrl->aging_ref_volt;
-+ corner->floor_volt = ctrl->aging_ref_volt;
-+ corner->open_loop_volt = ctrl->aging_ref_volt;
-+ corner->last_volt = ctrl->aging_ref_volt;
-+
-+ /* Skip last_volt caching */
-+ ctrl->last_corner_was_closed_loop = false;
-+
-+ /* Set the vdd supply voltage to the aging reference voltage */
-+ rc = _cpr3_regulator_update_ctrl_state(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to force vdd-supply to the aging reference voltage=%d uV, rc=%d\n",
-+ ctrl->aging_ref_volt, rc);
-+ goto cleanup;
-+ }
-+
-+ if (ctrl->aging_vdd_mode) {
-+ rc = regulator_set_mode(ctrl->vdd_regulator,
-+ ctrl->aging_vdd_mode);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to configure vdd-supply for mode=%u, rc=%d\n",
-+ ctrl->aging_vdd_mode, rc);
-+ goto cleanup;
-+ }
-+ }
-+
-+ /* Perform aging measurement on all aging sensors */
-+ for (i = 0; i < ctrl->aging_sensor_count; i++) {
-+ for (j = 0; j < CPR3_AGING_RETRY_COUNT; j++) {
-+ rc = cpr3_regulator_measure_aging(ctrl,
-+ &ctrl->aging_sensor[i]);
-+ if (!rc)
-+ break;
-+ }
-+
-+ if (!rc) {
-+ aging_volt =
-+ cpr3_voltage_adjustment(
-+ ctrl->aging_sensor[i].ro_scale,
-+ ctrl->aging_sensor[i].measured_quot_diff
-+ - ctrl->aging_sensor[i].init_quot_diff);
-+ max_aging_volt = max(max_aging_volt, aging_volt);
-+ } else {
-+ cpr3_err(ctrl, "CPR aging measurement failed after %d tries, rc=%d\n",
-+ j, rc);
-+ ctrl->aging_failed = true;
-+ ctrl->aging_required = false;
-+ goto cleanup;
-+ }
-+ }
-+
-+cleanup:
-+ vreg = &ctrl->thread[0].vreg[0];
-+ vreg->corner[vreg->current_corner] = restore_aging_corner;
-+
-+ for (i = 0, vreg_count = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++, vreg_count++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+ vreg->current_corner
-+ = restore_current_corner[vreg_count];
-+ vreg->vreg_enabled = restore_vreg_enabled[vreg_count];
-+ }
-+ }
-+
-+ kfree(restore_current_corner);
-+ kfree(restore_vreg_enabled);
-+
-+ /* Adjust the CPR target quotients according to the aging measurement */
-+ if (!rc) {
-+ cpr3_regulator_set_aging_ref_adjustment(ctrl, max_aging_volt);
-+
-+ cpr3_info(ctrl, "aging measurement successful; aging reference adjustment voltage=%d uV\n",
-+ ctrl->aging_ref_adjust_volt);
-+ ctrl->aging_succeeded = true;
-+ ctrl->aging_required = false;
-+ }
-+
-+ if (ctrl->aging_complete_vdd_mode) {
-+ rc = regulator_set_mode(ctrl->vdd_regulator,
-+ ctrl->aging_complete_vdd_mode);
-+ if (rc)
-+ cpr3_err(ctrl, "unable to configure vdd-supply for mode=%u, rc=%d\n",
-+ ctrl->aging_complete_vdd_mode, rc);
-+ }
-+
-+ /* Skip last_volt caching */
-+ ctrl->last_corner_was_closed_loop = false;
-+
-+ /*
-+ * Restore vdd-supply to the voltage before the aging measurement and
-+ * restore the CPR3 controller hardware state.
-+ */
-+ rc2 = _cpr3_regulator_update_ctrl_state(ctrl);
-+
-+ /* Stop last_volt caching on for the next request */
-+ ctrl->last_corner_was_closed_loop = false;
-+
-+ return rc ? rc : rc2;
-+}
-+
-+/**
-+ * cpr3_regulator_update_ctrl_state() - update the state of the CPR controller
-+ * to reflect the corners used by all CPR3 regulators as well as
-+ * the CPR operating mode and perform aging adjustments if needed
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Note, CPR3 controller lock must be held by the caller.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_update_ctrl_state(struct cpr3_controller *ctrl)
-+{
-+ int rc;
-+
-+ rc = _cpr3_regulator_update_ctrl_state(ctrl);
-+ if (rc)
-+ return rc;
-+
-+ return cpr3_regulator_aging_adjust(ctrl);
-+}
-+
-+/**
-+ * cpr3_regulator_set_voltage() - set the voltage corner for the CPR3 regulator
-+ * associated with the regulator device
-+ * @rdev: Regulator device pointer for the cpr3-regulator
-+ * @corner: New voltage corner to set (offset by CPR3_CORNER_OFFSET)
-+ * @corner_max: Maximum voltage corner allowed (offset by
-+ * CPR3_CORNER_OFFSET)
-+ * @selector: Pointer which is filled with the selector value for the
-+ * corner
-+ *
-+ * This function is passed as a callback function into the regulator ops that
-+ * are registered for each cpr3-regulator device. The VDD voltage will not be
-+ * physically configured until both this function and cpr3_regulator_enable()
-+ * are called.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_set_voltage(struct regulator_dev *rdev,
-+ int corner, int corner_max, unsigned *selector)
-+{
-+ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev);
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ int rc = 0;
-+ int last_corner;
-+
-+ corner -= CPR3_CORNER_OFFSET;
-+ corner_max -= CPR3_CORNER_OFFSET;
-+ *selector = corner;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ if (!vreg->vreg_enabled) {
-+ vreg->current_corner = corner;
-+ cpr3_debug(vreg, "stored corner=%d\n", corner);
-+ goto done;
-+ } else if (vreg->current_corner == corner) {
-+ goto done;
-+ }
-+
-+ last_corner = vreg->current_corner;
-+ vreg->current_corner = corner;
-+
-+ if (vreg->cpr4_regulator_data != NULL)
-+ if (vreg->cpr4_regulator_data->mem_acc_funcs != NULL)
-+ vreg->cpr4_regulator_data->mem_acc_funcs->set_mem_acc(rdev);
-+
-+ rc = cpr3_regulator_update_ctrl_state(ctrl);
-+ if (rc) {
-+ cpr3_err(vreg, "could not update CPR state, rc=%d\n", rc);
-+ vreg->current_corner = last_corner;
-+ }
-+
-+ if (vreg->cpr4_regulator_data != NULL)
-+ if (vreg->cpr4_regulator_data->mem_acc_funcs != NULL)
-+ vreg->cpr4_regulator_data->mem_acc_funcs->clear_mem_acc(rdev);
-+
-+ cpr3_debug(vreg, "set corner=%d\n", corner);
-+done:
-+ mutex_unlock(&ctrl->lock);
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_handle_temp_open_loop_adjustment() - voltage based cold temperature
-+ *
-+ * @rdev: Regulator device pointer for the cpr3-regulator
-+ * @is_cold: Flag to denote enter/exit cold condition
-+ *
-+ * This function is adjusts voltage margin based on cold condition
-+ *
-+ * Return: 0 = success
-+ */
-+
-+int cpr3_handle_temp_open_loop_adjustment(struct cpr3_controller *ctrl,
-+ bool is_cold)
-+{
-+ int i ,j, k, rc;
-+ struct cpr3_regulator *vreg;
-+
-+ mutex_lock(&ctrl->lock);
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+ for (k = 0; k < vreg->corner_count; k++) {
-+ vreg->corner[k].open_loop_volt = is_cold ?
-+ vreg->corner[k].cold_temp_open_loop_volt :
-+ vreg->corner[k].normal_temp_open_loop_volt;
-+ }
-+ }
-+ }
-+ rc = cpr3_regulator_update_ctrl_state(ctrl);
-+ mutex_unlock(&ctrl->lock);
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_regulator_get_voltage() - get the voltage corner for the CPR3 regulator
-+ * associated with the regulator device
-+ * @rdev: Regulator device pointer for the cpr3-regulator
-+ *
-+ * This function is passed as a callback function into the regulator ops that
-+ * are registered for each cpr3-regulator device.
-+ *
-+ * Return: voltage corner value offset by CPR3_CORNER_OFFSET
-+ */
-+static int cpr3_regulator_get_voltage(struct regulator_dev *rdev)
-+{
-+ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev);
-+
-+ if (vreg->current_corner == CPR3_REGULATOR_CORNER_INVALID)
-+ return CPR3_CORNER_OFFSET;
-+ else
-+ return vreg->current_corner + CPR3_CORNER_OFFSET;
-+}
-+
-+/**
-+ * cpr3_regulator_list_voltage() - return the voltage corner mapped to the
-+ * specified selector
-+ * @rdev: Regulator device pointer for the cpr3-regulator
-+ * @selector: Regulator selector
-+ *
-+ * This function is passed as a callback function into the regulator ops that
-+ * are registered for each cpr3-regulator device.
-+ *
-+ * Return: voltage corner value offset by CPR3_CORNER_OFFSET
-+ */
-+static int cpr3_regulator_list_voltage(struct regulator_dev *rdev,
-+ unsigned selector)
-+{
-+ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev);
-+
-+ if (selector < vreg->corner_count)
-+ return selector + CPR3_CORNER_OFFSET;
-+ else
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_is_enabled() - return the enable state of the CPR3 regulator
-+ * @rdev: Regulator device pointer for the cpr3-regulator
-+ *
-+ * This function is passed as a callback function into the regulator ops that
-+ * are registered for each cpr3-regulator device.
-+ *
-+ * Return: true if regulator is enabled, false if regulator is disabled
-+ */
-+static int cpr3_regulator_is_enabled(struct regulator_dev *rdev)
-+{
-+ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev);
-+
-+ return vreg->vreg_enabled;
-+}
-+
-+/**
-+ * cpr3_regulator_enable() - enable the CPR3 regulator
-+ * @rdev: Regulator device pointer for the cpr3-regulator
-+ *
-+ * This function is passed as a callback function into the regulator ops that
-+ * are registered for each cpr3-regulator device.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_enable(struct regulator_dev *rdev)
-+{
-+ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev);
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ int rc = 0;
-+
-+ if (vreg->vreg_enabled == true)
-+ return 0;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ if (ctrl->system_regulator) {
-+ rc = regulator_enable(ctrl->system_regulator);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_enable(system) failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ rc = regulator_enable(ctrl->vdd_regulator);
-+ if (rc) {
-+ cpr3_err(vreg, "regulator_enable(vdd) failed, rc=%d\n", rc);
-+ goto done;
-+ }
-+
-+ vreg->vreg_enabled = true;
-+ rc = cpr3_regulator_update_ctrl_state(ctrl);
-+ if (rc) {
-+ cpr3_err(vreg, "could not update CPR state, rc=%d\n", rc);
-+ regulator_disable(ctrl->vdd_regulator);
-+ vreg->vreg_enabled = false;
-+ goto done;
-+ }
-+
-+ cpr3_debug(vreg, "Enabled\n");
-+done:
-+ mutex_unlock(&ctrl->lock);
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_regulator_disable() - disable the CPR3 regulator
-+ * @rdev: Regulator device pointer for the cpr3-regulator
-+ *
-+ * This function is passed as a callback function into the regulator ops that
-+ * are registered for each cpr3-regulator device.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_disable(struct regulator_dev *rdev)
-+{
-+ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev);
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ int rc, rc2;
-+
-+ if (vreg->vreg_enabled == false)
-+ return 0;
-+
-+ mutex_lock(&ctrl->lock);
-+ rc = regulator_disable(ctrl->vdd_regulator);
-+ if (rc) {
-+ cpr3_err(vreg, "regulator_disable(vdd) failed, rc=%d\n", rc);
-+ goto done;
-+ }
-+
-+ vreg->vreg_enabled = false;
-+ rc = cpr3_regulator_update_ctrl_state(ctrl);
-+ if (rc) {
-+ cpr3_err(vreg, "could not update CPR state, rc=%d\n", rc);
-+ rc2 = regulator_enable(ctrl->vdd_regulator);
-+ vreg->vreg_enabled = true;
-+ goto done;
-+ }
-+
-+ if (ctrl->system_regulator) {
-+ rc = regulator_disable(ctrl->system_regulator);
-+ if (rc) {
-+ cpr3_err(ctrl, "regulator_disable(system) failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ cpr3_debug(vreg, "Disabled\n");
-+done:
-+ mutex_unlock(&ctrl->lock);
-+
-+ return rc;
-+}
-+
-+static struct regulator_ops cpr3_regulator_ops = {
-+ .enable = cpr3_regulator_enable,
-+ .disable = cpr3_regulator_disable,
-+ .is_enabled = cpr3_regulator_is_enabled,
-+ .set_voltage = cpr3_regulator_set_voltage,
-+ .get_voltage = cpr3_regulator_get_voltage,
-+ .list_voltage = cpr3_regulator_list_voltage,
-+};
-+
-+/**
-+ * cpr3_print_result() - print CPR measurement results to the kernel log for
-+ * debugging purposes
-+ * @thread: Pointer to the CPR3 thread
-+ *
-+ * Return: None
-+ */
-+static void cpr3_print_result(struct cpr3_thread *thread)
-+{
-+ struct cpr3_controller *ctrl = thread->ctrl;
-+ u32 result[3], busy, step_dn, step_up, error_steps, error, negative;
-+ u32 quot_min, quot_max, ro_min, ro_max, step_quot_min, step_quot_max;
-+ u32 sensor_min, sensor_max;
-+ char *sign;
-+
-+ result[0] = cpr3_read(ctrl, CPR3_REG_RESULT0(thread->thread_id));
-+ result[1] = cpr3_read(ctrl, CPR3_REG_RESULT1(thread->thread_id));
-+ result[2] = cpr3_read(ctrl, CPR3_REG_RESULT2(thread->thread_id));
-+
-+ busy = !!(result[0] & CPR3_RESULT0_BUSY_MASK);
-+ step_dn = !!(result[0] & CPR3_RESULT0_STEP_DN_MASK);
-+ step_up = !!(result[0] & CPR3_RESULT0_STEP_UP_MASK);
-+ error_steps = (result[0] & CPR3_RESULT0_ERROR_STEPS_MASK)
-+ >> CPR3_RESULT0_ERROR_STEPS_SHIFT;
-+ error = (result[0] & CPR3_RESULT0_ERROR_MASK)
-+ >> CPR3_RESULT0_ERROR_SHIFT;
-+ negative = !!(result[0] & CPR3_RESULT0_NEGATIVE_MASK);
-+
-+ quot_min = (result[1] & CPR3_RESULT1_QUOT_MIN_MASK)
-+ >> CPR3_RESULT1_QUOT_MIN_SHIFT;
-+ quot_max = (result[1] & CPR3_RESULT1_QUOT_MAX_MASK)
-+ >> CPR3_RESULT1_QUOT_MAX_SHIFT;
-+ ro_min = (result[1] & CPR3_RESULT1_RO_MIN_MASK)
-+ >> CPR3_RESULT1_RO_MIN_SHIFT;
-+ ro_max = (result[1] & CPR3_RESULT1_RO_MAX_MASK)
-+ >> CPR3_RESULT1_RO_MAX_SHIFT;
-+
-+ step_quot_min = (result[2] & CPR3_RESULT2_STEP_QUOT_MIN_MASK)
-+ >> CPR3_RESULT2_STEP_QUOT_MIN_SHIFT;
-+ step_quot_max = (result[2] & CPR3_RESULT2_STEP_QUOT_MAX_MASK)
-+ >> CPR3_RESULT2_STEP_QUOT_MAX_SHIFT;
-+ sensor_min = (result[2] & CPR3_RESULT2_SENSOR_MIN_MASK)
-+ >> CPR3_RESULT2_SENSOR_MIN_SHIFT;
-+ sensor_max = (result[2] & CPR3_RESULT2_SENSOR_MAX_MASK)
-+ >> CPR3_RESULT2_SENSOR_MAX_SHIFT;
-+
-+ sign = negative ? "-" : "";
-+ cpr3_debug(ctrl, "thread %u: busy=%u, step_dn=%u, step_up=%u, error_steps=%s%u, error=%s%u\n",
-+ thread->thread_id, busy, step_dn, step_up, sign, error_steps,
-+ sign, error);
-+ cpr3_debug(ctrl, "thread %u: quot_min=%u, quot_max=%u, ro_min=%u, ro_max=%u\n",
-+ thread->thread_id, quot_min, quot_max, ro_min, ro_max);
-+ cpr3_debug(ctrl, "thread %u: step_quot_min=%u, step_quot_max=%u, sensor_min=%u, sensor_max=%u\n",
-+ thread->thread_id, step_quot_min, step_quot_max, sensor_min,
-+ sensor_max);
-+}
-+
-+/**
-+ * cpr3_thread_busy() - returns if the specified CPR3 thread is busy taking
-+ * a measurement
-+ * @thread: Pointer to the CPR3 thread
-+ *
-+ * Return: CPR3 busy status
-+ */
-+static bool cpr3_thread_busy(struct cpr3_thread *thread)
-+{
-+ u32 result;
-+
-+ result = cpr3_read(thread->ctrl, CPR3_REG_RESULT0(thread->thread_id));
-+
-+ return !!(result & CPR3_RESULT0_BUSY_MASK);
-+}
-+
-+/**
-+ * cpr3_irq_handler() - CPR interrupt handler callback function used for
-+ * software closed-loop operation
-+ * @irq: CPR interrupt number
-+ * @data: Private data corresponding to the CPR3 controller
-+ * pointer
-+ *
-+ * This function increases or decreases the vdd supply voltage based upon the
-+ * CPR controller recommendation.
-+ *
-+ * Return: IRQ_HANDLED
-+ */
-+static irqreturn_t cpr3_irq_handler(int irq, void *data)
-+{
-+ struct cpr3_controller *ctrl = data;
-+ struct cpr3_corner *aggr = &ctrl->aggr_corner;
-+ u32 cont = CPR3_CONT_CMD_NACK;
-+ u32 reg_last_measurement = 0;
-+ struct cpr3_regulator *vreg;
-+ struct cpr3_corner *corner;
-+ unsigned long flags;
-+ int i, j, new_volt, last_volt, dynamic_floor_volt, rc;
-+ u32 irq_en, status, cpr_status, ctl;
-+ bool up, down;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ if (!ctrl->cpr_enabled) {
-+ cpr3_debug(ctrl, "CPR interrupt received but CPR is disabled\n");
-+ mutex_unlock(&ctrl->lock);
-+ return IRQ_HANDLED;
-+ } else if (ctrl->use_hw_closed_loop) {
-+ cpr3_debug(ctrl, "CPR interrupt received but CPR is using HW closed-loop\n");
-+ goto done;
-+ }
-+
-+ /*
-+ * CPR IRQ status checking and CPR controller disabling must happen
-+ * atomically and without invening delay in order to avoid an interrupt
-+ * storm caused by the handler racing with the CPR controller.
-+ */
-+ local_irq_save(flags);
-+ preempt_disable();
-+
-+ status = cpr3_read(ctrl, CPR3_REG_IRQ_STATUS);
-+ up = status & CPR3_IRQ_UP;
-+ down = status & CPR3_IRQ_DOWN;
-+
-+ if (!up && !down) {
-+ /*
-+ * Toggle the CPR controller off and then back on since the
-+ * hardware and software states are out of sync. This condition
-+ * occurs after an aging measurement completes as the CPR IRQ
-+ * physically triggers during the aging measurement but the
-+ * handler is stuck waiting on the mutex lock.
-+ */
-+ cpr3_ctrl_loop_disable(ctrl);
-+
-+ local_irq_restore(flags);
-+ preempt_enable();
-+
-+ /* Wait for the loop disable write to complete */
-+ mb();
-+
-+ /* Wait for BUSY=1 and LOOP_EN=0 in CPR controller registers. */
-+ for (i = 0; i < CPR3_REGISTER_WRITE_DELAY_US / 10; i++) {
-+ cpr_status = cpr3_read(ctrl, CPR3_REG_CPR_STATUS);
-+ ctl = cpr3_read(ctrl, CPR3_REG_CPR_CTL);
-+ if (cpr_status & CPR3_CPR_STATUS_BUSY_MASK
-+ && (ctl & CPR3_CPR_CTL_LOOP_EN_MASK)
-+ == CPR3_CPR_CTL_LOOP_DISABLE)
-+ break;
-+ udelay(10);
-+ }
-+ if (i == CPR3_REGISTER_WRITE_DELAY_US / 10)
-+ cpr3_debug(ctrl, "CPR controller not disabled after %d us\n",
-+ CPR3_REGISTER_WRITE_DELAY_US);
-+
-+ /* Clear interrupt status */
-+ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR,
-+ CPR3_IRQ_UP | CPR3_IRQ_DOWN);
-+
-+ /* Wait for the interrupt clearing write to complete */
-+ mb();
-+
-+ /* Wait for IRQ_STATUS register to be cleared. */
-+ for (i = 0; i < CPR3_REGISTER_WRITE_DELAY_US / 10; i++) {
-+ status = cpr3_read(ctrl, CPR3_REG_IRQ_STATUS);
-+ if (!(status & (CPR3_IRQ_UP | CPR3_IRQ_DOWN)))
-+ break;
-+ udelay(10);
-+ }
-+ if (i == CPR3_REGISTER_WRITE_DELAY_US / 10)
-+ cpr3_debug(ctrl, "CPR interrupts not cleared after %d us\n",
-+ CPR3_REGISTER_WRITE_DELAY_US);
-+
-+ cpr3_ctrl_loop_enable(ctrl);
-+
-+ cpr3_debug(ctrl, "CPR interrupt received but no up or down status bit is set\n");
-+
-+ mutex_unlock(&ctrl->lock);
-+ return IRQ_HANDLED;
-+ } else if (up && down) {
-+ cpr3_debug(ctrl, "both up and down status bits set\n");
-+ /* The up flag takes precedence over the down flag. */
-+ down = false;
-+ }
-+
-+ if (ctrl->supports_hw_closed_loop)
-+ reg_last_measurement
-+ = cpr3_read(ctrl, CPR3_REG_LAST_MEASUREMENT);
-+ dynamic_floor_volt = cpr3_regulator_get_dynamic_floor_volt(ctrl,
-+ reg_last_measurement);
-+
-+ local_irq_restore(flags);
-+ preempt_enable();
-+
-+ irq_en = aggr->irq_en;
-+ last_volt = aggr->last_volt;
-+
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ if (cpr3_thread_busy(&ctrl->thread[i])) {
-+ cpr3_debug(ctrl, "CPR thread %u busy when it should be waiting for SW cont\n",
-+ ctrl->thread[i].thread_id);
-+ goto done;
-+ }
-+ }
-+
-+ new_volt = up ? last_volt + ctrl->step_volt
-+ : last_volt - ctrl->step_volt;
-+
-+ /* Re-enable UP/DOWN interrupt when its opposite is received. */
-+ irq_en |= up ? CPR3_IRQ_DOWN : CPR3_IRQ_UP;
-+
-+ if (new_volt > aggr->ceiling_volt) {
-+ new_volt = aggr->ceiling_volt;
-+ irq_en &= ~CPR3_IRQ_UP;
-+ cpr3_debug(ctrl, "limiting to ceiling=%d uV\n",
-+ aggr->ceiling_volt);
-+ } else if (new_volt < aggr->floor_volt) {
-+ new_volt = aggr->floor_volt;
-+ irq_en &= ~CPR3_IRQ_DOWN;
-+ cpr3_debug(ctrl, "limiting to floor=%d uV\n", aggr->floor_volt);
-+ }
-+
-+ if (down && new_volt < dynamic_floor_volt) {
-+ /*
-+ * The vdd-supply voltage should not be decreased below the
-+ * dynamic floor voltage. However, it is not necessary (and
-+ * counter productive) to force the voltage up to this level
-+ * if it happened to be below it since the closed-loop voltage
-+ * must have gotten there in a safe manner while the power
-+ * domains for the CPR3 regulator imposing the dynamic floor
-+ * were not bypassed.
-+ */
-+ new_volt = last_volt;
-+ irq_en &= ~CPR3_IRQ_DOWN;
-+ cpr3_debug(ctrl, "limiting to dynamic floor=%d uV\n",
-+ dynamic_floor_volt);
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++)
-+ cpr3_print_result(&ctrl->thread[i]);
-+
-+ cpr3_debug(ctrl, "%s: new_volt=%d uV, last_volt=%d uV\n",
-+ up ? "UP" : "DN", new_volt, last_volt);
-+
-+ if (ctrl->proc_clock_throttle && last_volt == aggr->ceiling_volt
-+ && new_volt < last_volt)
-+ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE,
-+ ctrl->proc_clock_throttle);
-+
-+ if (new_volt != last_volt) {
-+ rc = cpr3_regulator_scale_vdd_voltage(ctrl, new_volt,
-+ last_volt,
-+ aggr);
-+ if (rc) {
-+ cpr3_err(ctrl, "scale_vdd() failed to set vdd=%d uV, rc=%d\n",
-+ new_volt, rc);
-+ goto done;
-+ }
-+ cont = CPR3_CONT_CMD_ACK;
-+
-+ /*
-+ * Update the closed-loop voltage for all regulators managed
-+ * by this CPR controller.
-+ */
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+ cpr3_update_vreg_closed_loop_volt(vreg,
-+ new_volt, reg_last_measurement);
-+ }
-+ }
-+ }
-+
-+ if (ctrl->proc_clock_throttle && new_volt == aggr->ceiling_volt)
-+ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE,
-+ CPR3_PD_THROTTLE_DISABLE);
-+
-+ corner = &ctrl->thread[0].vreg[0].corner[
-+ ctrl->thread[0].vreg[0].current_corner];
-+
-+ if (irq_en != aggr->irq_en) {
-+ aggr->irq_en = irq_en;
-+ cpr3_write(ctrl, CPR3_REG_IRQ_EN, irq_en);
-+ }
-+
-+ aggr->last_volt = new_volt;
-+
-+done:
-+ /* Clear interrupt status */
-+ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR, CPR3_IRQ_UP | CPR3_IRQ_DOWN);
-+
-+ /* ACK or NACK the CPR controller */
-+ cpr3_write(ctrl, CPR3_REG_CONT_CMD, cont);
-+
-+ mutex_unlock(&ctrl->lock);
-+ return IRQ_HANDLED;
-+}
-+
-+/**
-+ * cpr3_ceiling_irq_handler() - CPR ceiling reached interrupt handler callback
-+ * function used for hardware closed-loop operation
-+ * @irq: CPR ceiling interrupt number
-+ * @data: Private data corresponding to the CPR3 controller
-+ * pointer
-+ *
-+ * This function disables processor clock throttling and closed-loop operation
-+ * when the ceiling voltage is reached.
-+ *
-+ * Return: IRQ_HANDLED
-+ */
-+static irqreturn_t cpr3_ceiling_irq_handler(int irq, void *data)
-+{
-+ struct cpr3_controller *ctrl = data;
-+ int volt;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ if (!ctrl->cpr_enabled) {
-+ cpr3_debug(ctrl, "CPR ceiling interrupt received but CPR is disabled\n");
-+ goto done;
-+ } else if (!ctrl->use_hw_closed_loop) {
-+ cpr3_debug(ctrl, "CPR ceiling interrupt received but CPR is using SW closed-loop\n");
-+ goto done;
-+ }
-+
-+ volt = regulator_get_voltage(ctrl->vdd_regulator);
-+ if (volt < 0) {
-+ cpr3_err(ctrl, "could not get vdd voltage, rc=%d\n", volt);
-+ goto done;
-+ } else if (volt != ctrl->aggr_corner.ceiling_volt) {
-+ cpr3_debug(ctrl, "CPR ceiling interrupt received but vdd voltage: %d uV != ceiling voltage: %d uV\n",
-+ volt, ctrl->aggr_corner.ceiling_volt);
-+ goto done;
-+ }
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ /*
-+ * Since the ceiling voltage has been reached, disable processor
-+ * clock throttling as well as CPR closed-loop operation.
-+ */
-+ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE,
-+ CPR3_PD_THROTTLE_DISABLE);
-+ cpr3_ctrl_loop_disable(ctrl);
-+ cpr3_debug(ctrl, "CPR closed-loop and throttling disabled\n");
-+ }
-+
-+done:
-+ mutex_unlock(&ctrl->lock);
-+ return IRQ_HANDLED;
-+}
-+
-+/**
-+ * cpr3_regulator_vreg_register() - register a regulator device for a CPR3
-+ * regulator
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * This function initializes all regulator framework related structures and then
-+ * calls regulator_register() for the CPR3 regulator.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_vreg_register(struct cpr3_regulator *vreg)
-+{
-+ struct regulator_config config = {};
-+ struct regulator_desc *rdesc;
-+ struct regulator_init_data *init_data;
-+ int rc;
-+
-+ init_data = of_get_regulator_init_data(vreg->thread->ctrl->dev,
-+ vreg->of_node, &vreg->rdesc);
-+ if (!init_data) {
-+ cpr3_err(vreg, "regulator init data is missing\n");
-+ return -EINVAL;
-+ }
-+
-+ init_data->constraints.input_uV = init_data->constraints.max_uV;
-+ rdesc = &vreg->rdesc;
-+ init_data->constraints.valid_ops_mask |=
-+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS;
-+ rdesc->ops = &cpr3_regulator_ops;
-+
-+ rdesc->n_voltages = vreg->corner_count;
-+ rdesc->name = init_data->constraints.name;
-+ rdesc->owner = THIS_MODULE;
-+ rdesc->type = REGULATOR_VOLTAGE;
-+
-+ config.dev = vreg->thread->ctrl->dev;
-+ config.driver_data = vreg;
-+ config.init_data = init_data;
-+ config.of_node = vreg->of_node;
-+
-+ vreg->rdev = regulator_register(rdesc, &config);
-+ if (IS_ERR(vreg->rdev)) {
-+ rc = PTR_ERR(vreg->rdev);
-+ cpr3_err(vreg, "regulator_register failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ return 0;
-+}
-+
-+static int debugfs_int_set(void *data, u64 val)
-+{
-+ *(int *)data = val;
-+ return 0;
-+}
-+
-+static int debugfs_int_get(void *data, u64 *val)
-+{
-+ *val = *(int *)data;
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(fops_int, debugfs_int_get, debugfs_int_set, "%lld\n");
-+DEFINE_SIMPLE_ATTRIBUTE(fops_int_ro, debugfs_int_get, NULL, "%lld\n");
-+DEFINE_SIMPLE_ATTRIBUTE(fops_int_wo, NULL, debugfs_int_set, "%lld\n");
-+
-+/**
-+ * debugfs_create_int - create a debugfs file that is used to read and write a
-+ * signed int value
-+ * @name: Pointer to a string containing the name of the file to
-+ * create
-+ * @mode: The permissions that the file should have
-+ * @parent: Pointer to the parent dentry for this file. This should
-+ * be a directory dentry if set. If this parameter is
-+ * %NULL, then the file will be created in the root of the
-+ * debugfs filesystem.
-+ * @value: Pointer to the variable that the file should read to and
-+ * write from
-+ *
-+ * This function creates a file in debugfs with the given name that
-+ * contains the value of the variable @value. If the @mode variable is so
-+ * set, it can be read from, and written to.
-+ *
-+ * This function will return a pointer to a dentry if it succeeds. This
-+ * pointer must be passed to the debugfs_remove() function when the file is
-+ * to be removed. If an error occurs, %NULL will be returned.
-+ */
-+static struct dentry *debugfs_create_int(const char *name, umode_t mode,
-+ struct dentry *parent, int *value)
-+{
-+ /* if there are no write bits set, make read only */
-+ if (!(mode & S_IWUGO))
-+ return debugfs_create_file(name, mode, parent, value,
-+ &fops_int_ro);
-+ /* if there are no read bits set, make write only */
-+ if (!(mode & S_IRUGO))
-+ return debugfs_create_file(name, mode, parent, value,
-+ &fops_int_wo);
-+
-+ return debugfs_create_file(name, mode, parent, value, &fops_int);
-+}
-+
-+static int debugfs_bool_get(void *data, u64 *val)
-+{
-+ *val = *(bool *)data;
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(fops_bool_ro, debugfs_bool_get, NULL, "%lld\n");
-+
-+/**
-+ * struct cpr3_debug_corner_info - data structure used by the
-+ * cpr3_debugfs_create_corner_int function
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @index: Pointer to the corner array index
-+ * @member_offset: Offset in bytes from the beginning of struct cpr3_corner
-+ * to the beginning of the value to be read from
-+ * @corner: Pointer to the CPR3 corner array
-+ */
-+struct cpr3_debug_corner_info {
-+ struct cpr3_regulator *vreg;
-+ int *index;
-+ size_t member_offset;
-+ struct cpr3_corner *corner;
-+};
-+
-+static int cpr3_debug_corner_int_get(void *data, u64 *val)
-+{
-+ struct cpr3_debug_corner_info *info = data;
-+ struct cpr3_controller *ctrl = info->vreg->thread->ctrl;
-+ int i;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ i = *info->index;
-+ if (i < 0)
-+ i = 0;
-+
-+ *val = *(int *)((char *)&info->vreg->corner[i] + info->member_offset);
-+
-+ mutex_unlock(&ctrl->lock);
-+
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_corner_int_fops, cpr3_debug_corner_int_get,
-+ NULL, "%lld\n");
-+
-+/**
-+ * cpr3_debugfs_create_corner_int - create a debugfs file that is used to read
-+ * a signed int value out of a CPR3 regulator's corner array
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @name: Pointer to a string containing the name of the file to
-+ * create
-+ * @mode: The permissions that the file should have
-+ * @parent: Pointer to the parent dentry for this file. This should
-+ * be a directory dentry if set. If this parameter is
-+ * %NULL, then the file will be created in the root of the
-+ * debugfs filesystem.
-+ * @index: Pointer to the corner array index
-+ * @member_offset: Offset in bytes from the beginning of struct cpr3_corner
-+ * to the beginning of the value to be read from
-+ *
-+ * This function creates a file in debugfs with the given name that
-+ * contains the value of the int type variable vreg->corner[index].member
-+ * where member_offset == offsetof(struct cpr3_corner, member).
-+ */
-+static struct dentry *cpr3_debugfs_create_corner_int(
-+ struct cpr3_regulator *vreg, const char *name, umode_t mode,
-+ struct dentry *parent, int *index, size_t member_offset)
-+{
-+ struct cpr3_debug_corner_info *info;
-+
-+ info = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*info), GFP_KERNEL);
-+ if (!info)
-+ return NULL;
-+
-+ info->vreg = vreg;
-+ info->index = index;
-+ info->member_offset = member_offset;
-+
-+ return debugfs_create_file(name, mode, parent, info,
-+ &cpr3_debug_corner_int_fops);
-+}
-+
-+static int cpr3_debug_quot_open(struct inode *inode, struct file *file)
-+{
-+ struct cpr3_debug_corner_info *info = inode->i_private;
-+ struct cpr3_thread *thread = info->vreg->thread;
-+ int size, i, pos;
-+ u32 *quot;
-+ char *buf;
-+
-+ /*
-+ * Max size:
-+ * - 10 digits + ' ' or '\n' = 11 bytes per number
-+ * - terminating '\0'
-+ */
-+ size = CPR3_RO_COUNT * 11;
-+ buf = kzalloc(size + 1, GFP_KERNEL);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ file->private_data = buf;
-+
-+ mutex_lock(&thread->ctrl->lock);
-+
-+ quot = info->corner[*info->index].target_quot;
-+
-+ for (i = 0, pos = 0; i < CPR3_RO_COUNT; i++)
-+ pos += scnprintf(buf + pos, size - pos, "%u%c",
-+ quot[i], i < CPR3_RO_COUNT - 1 ? ' ' : '\n');
-+
-+ mutex_unlock(&thread->ctrl->lock);
-+
-+ return nonseekable_open(inode, file);
-+}
-+
-+static ssize_t cpr3_debug_quot_read(struct file *file, char __user *buf,
-+ size_t len, loff_t *ppos)
-+{
-+ return simple_read_from_buffer(buf, len, ppos, file->private_data,
-+ strlen(file->private_data));
-+}
-+
-+static int cpr3_debug_quot_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+
-+ return 0;
-+}
-+
-+static const struct file_operations cpr3_debug_quot_fops = {
-+ .owner = THIS_MODULE,
-+ .open = cpr3_debug_quot_open,
-+ .release = cpr3_debug_quot_release,
-+ .read = cpr3_debug_quot_read,
-+ .llseek = no_llseek,
-+};
-+
-+/**
-+ * cpr3_regulator_debugfs_corner_add() - add debugfs files to expose
-+ * configuration data for the CPR corner
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @corner_dir: Pointer to the parent corner dentry for the new files
-+ * @index: Pointer to the corner array index
-+ *
-+ * Return: none
-+ */
-+static void cpr3_regulator_debugfs_corner_add(struct cpr3_regulator *vreg,
-+ struct dentry *corner_dir, int *index)
-+{
-+ struct cpr3_debug_corner_info *info;
-+ struct dentry *temp;
-+
-+ temp = cpr3_debugfs_create_corner_int(vreg, "floor_volt", S_IRUGO,
-+ corner_dir, index, offsetof(struct cpr3_corner, floor_volt));
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "floor_volt debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = cpr3_debugfs_create_corner_int(vreg, "ceiling_volt", S_IRUGO,
-+ corner_dir, index, offsetof(struct cpr3_corner, ceiling_volt));
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "ceiling_volt debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = cpr3_debugfs_create_corner_int(vreg, "open_loop_volt", S_IRUGO,
-+ corner_dir, index,
-+ offsetof(struct cpr3_corner, open_loop_volt));
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "open_loop_volt debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = cpr3_debugfs_create_corner_int(vreg, "last_volt", S_IRUGO,
-+ corner_dir, index, offsetof(struct cpr3_corner, last_volt));
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "last_volt debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ info = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*info), GFP_KERNEL);
-+ if (!info)
-+ return;
-+
-+ info->vreg = vreg;
-+ info->index = index;
-+ info->corner = vreg->corner;
-+
-+ temp = debugfs_create_file("target_quots", S_IRUGO, corner_dir,
-+ info, &cpr3_debug_quot_fops);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "target_quots debugfs file creation failed\n");
-+ return;
-+ }
-+}
-+
-+/**
-+ * cpr3_debug_corner_index_set() - debugfs callback used to change the
-+ * value of the CPR3 regulator debug_corner index
-+ * @data: Pointer to private data which is equal to the CPR3
-+ * regulator pointer
-+ * @val: New value for debug_corner
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_debug_corner_index_set(void *data, u64 val)
-+{
-+ struct cpr3_regulator *vreg = data;
-+
-+ if (val < CPR3_CORNER_OFFSET || val > vreg->corner_count) {
-+ cpr3_err(vreg, "invalid corner index %llu; allowed values: %d-%d\n",
-+ val, CPR3_CORNER_OFFSET, vreg->corner_count);
-+ return -EINVAL;
-+ }
-+
-+ mutex_lock(&vreg->thread->ctrl->lock);
-+ vreg->debug_corner = val - CPR3_CORNER_OFFSET;
-+ mutex_unlock(&vreg->thread->ctrl->lock);
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_debug_corner_index_get() - debugfs callback used to retrieve
-+ * the value of the CPR3 regulator debug_corner index
-+ * @data: Pointer to private data which is equal to the CPR3
-+ * regulator pointer
-+ * @val: Output parameter written with the value of
-+ * debug_corner
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_debug_corner_index_get(void *data, u64 *val)
-+{
-+ struct cpr3_regulator *vreg = data;
-+
-+ *val = vreg->debug_corner + CPR3_CORNER_OFFSET;
-+
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_corner_index_fops,
-+ cpr3_debug_corner_index_get,
-+ cpr3_debug_corner_index_set,
-+ "%llu\n");
-+
-+/**
-+ * cpr3_debug_current_corner_index_get() - debugfs callback used to retrieve
-+ * the value of the CPR3 regulator current_corner index
-+ * @data: Pointer to private data which is equal to the CPR3
-+ * regulator pointer
-+ * @val: Output parameter written with the value of
-+ * current_corner
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_debug_current_corner_index_get(void *data, u64 *val)
-+{
-+ struct cpr3_regulator *vreg = data;
-+
-+ *val = vreg->current_corner + CPR3_CORNER_OFFSET;
-+
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_current_corner_index_fops,
-+ cpr3_debug_current_corner_index_get,
-+ NULL, "%llu\n");
-+
-+/**
-+ * cpr3_regulator_debugfs_vreg_add() - add debugfs files to expose configuration
-+ * data for the CPR3 regulator
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @thread_dir CPR3 thread debugfs directory handle
-+ *
-+ * Return: none
-+ */
-+static void cpr3_regulator_debugfs_vreg_add(struct cpr3_regulator *vreg,
-+ struct dentry *thread_dir)
-+{
-+ struct dentry *temp, *corner_dir, *vreg_dir;
-+
-+ vreg_dir = debugfs_create_dir(vreg->name, thread_dir);
-+ if (IS_ERR_OR_NULL(vreg_dir)) {
-+ cpr3_err(vreg, "%s debugfs directory creation failed\n",
-+ vreg->name);
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("speed_bin_fuse", S_IRUGO, vreg_dir,
-+ &vreg->speed_bin_fuse);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "speed_bin_fuse debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("cpr_rev_fuse", S_IRUGO, vreg_dir,
-+ &vreg->cpr_rev_fuse);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "cpr_rev_fuse debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("fuse_combo", S_IRUGO, vreg_dir,
-+ &vreg->fuse_combo);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "fuse_combo debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("corner_count", S_IRUGO, vreg_dir,
-+ &vreg->corner_count);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "corner_count debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ corner_dir = debugfs_create_dir("corner", vreg_dir);
-+ if (IS_ERR_OR_NULL(corner_dir)) {
-+ cpr3_err(vreg, "corner debugfs directory creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_file("index", S_IRUGO | S_IWUSR, corner_dir,
-+ vreg, &cpr3_debug_corner_index_fops);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "index debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ cpr3_regulator_debugfs_corner_add(vreg, corner_dir,
-+ &vreg->debug_corner);
-+
-+ corner_dir = debugfs_create_dir("current_corner", vreg_dir);
-+ if (IS_ERR_OR_NULL(corner_dir)) {
-+ cpr3_err(vreg, "current_corner debugfs directory creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_file("index", S_IRUGO, corner_dir,
-+ vreg, &cpr3_debug_current_corner_index_fops);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(vreg, "index debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ cpr3_regulator_debugfs_corner_add(vreg, corner_dir,
-+ &vreg->current_corner);
-+}
-+
-+/**
-+ * cpr3_regulator_debugfs_thread_add() - add debugfs files to expose
-+ * configuration data for the CPR thread
-+ * @thread: Pointer to the CPR3 thread
-+ *
-+ * Return: none
-+ */
-+static void cpr3_regulator_debugfs_thread_add(struct cpr3_thread *thread)
-+{
-+ struct cpr3_controller *ctrl = thread->ctrl;
-+ struct dentry *aggr_dir, *temp, *thread_dir;
-+ struct cpr3_debug_corner_info *info;
-+ char buf[20];
-+ int *index;
-+ int i;
-+
-+ scnprintf(buf, sizeof(buf), "thread%u", thread->thread_id);
-+ thread_dir = debugfs_create_dir(buf, thread->ctrl->debugfs);
-+ if (IS_ERR_OR_NULL(thread_dir)) {
-+ cpr3_err(ctrl, "thread %u %s debugfs directory creation failed\n",
-+ thread->thread_id, buf);
-+ return;
-+ }
-+
-+ aggr_dir = debugfs_create_dir("max_aggregated_params", thread_dir);
-+ if (IS_ERR_OR_NULL(aggr_dir)) {
-+ cpr3_err(ctrl, "thread %u max_aggregated_params debugfs directory creation failed\n",
-+ thread->thread_id);
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("floor_volt", S_IRUGO, aggr_dir,
-+ &thread->aggr_corner.floor_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "thread %u aggr floor_volt debugfs file creation failed\n",
-+ thread->thread_id);
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("ceiling_volt", S_IRUGO, aggr_dir,
-+ &thread->aggr_corner.ceiling_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "thread %u aggr ceiling_volt debugfs file creation failed\n",
-+ thread->thread_id);
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("open_loop_volt", S_IRUGO, aggr_dir,
-+ &thread->aggr_corner.open_loop_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "thread %u aggr open_loop_volt debugfs file creation failed\n",
-+ thread->thread_id);
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("last_volt", S_IRUGO, aggr_dir,
-+ &thread->aggr_corner.last_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "thread %u aggr last_volt debugfs file creation failed\n",
-+ thread->thread_id);
-+ return;
-+ }
-+
-+ info = devm_kzalloc(thread->ctrl->dev, sizeof(*info), GFP_KERNEL);
-+ index = devm_kzalloc(thread->ctrl->dev, sizeof(*index), GFP_KERNEL);
-+ if (!info || !index)
-+ return;
-+ *index = 0;
-+ info->vreg = &thread->vreg[0];
-+ info->index = index;
-+ info->corner = &thread->aggr_corner;
-+
-+ temp = debugfs_create_file("target_quots", S_IRUGO, aggr_dir,
-+ info, &cpr3_debug_quot_fops);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "thread %u target_quots debugfs file creation failed\n",
-+ thread->thread_id);
-+ return;
-+ }
-+
-+ for (i = 0; i < thread->vreg_count; i++)
-+ cpr3_regulator_debugfs_vreg_add(&thread->vreg[i], thread_dir);
-+}
-+
-+/**
-+ * cpr3_debug_closed_loop_enable_set() - debugfs callback used to change the
-+ * value of the CPR controller cpr_allowed_sw flag which enables or
-+ * disables closed-loop operation
-+ * @data: Pointer to private data which is equal to the CPR
-+ * controller pointer
-+ * @val: New value for cpr_allowed_sw
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_debug_closed_loop_enable_set(void *data, u64 val)
-+{
-+ struct cpr3_controller *ctrl = data;
-+ bool enable = !!val;
-+ int rc;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ if (ctrl->cpr_allowed_sw == enable)
-+ goto done;
-+
-+ if (enable && !ctrl->cpr_allowed_hw) {
-+ cpr3_err(ctrl, "CPR closed-loop operation is not allowed\n");
-+ goto done;
-+ }
-+
-+ ctrl->cpr_allowed_sw = enable;
-+
-+ rc = cpr3_regulator_update_ctrl_state(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not change CPR enable state=%u, rc=%d\n",
-+ enable, rc);
-+ goto done;
-+ }
-+
-+ if (ctrl->proc_clock_throttle && !ctrl->cpr_enabled) {
-+ rc = cpr3_clock_enable(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "clock enable failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ ctrl->cpr_enabled = true;
-+
-+ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE,
-+ CPR3_PD_THROTTLE_DISABLE);
-+
-+ cpr3_clock_disable(ctrl);
-+ ctrl->cpr_enabled = false;
-+ }
-+
-+ cpr3_debug(ctrl, "closed-loop=%s\n", enable ? "enabled" : "disabled");
-+done:
-+ mutex_unlock(&ctrl->lock);
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_debug_closed_loop_enable_get() - debugfs callback used to retrieve
-+ * the value of the CPR controller cpr_allowed_sw flag which
-+ * indicates if closed-loop operation is enabled
-+ * @data: Pointer to private data which is equal to the CPR
-+ * controller pointer
-+ * @val: Output parameter written with the value of
-+ * cpr_allowed_sw
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_debug_closed_loop_enable_get(void *data, u64 *val)
-+{
-+ struct cpr3_controller *ctrl = data;
-+
-+ *val = ctrl->cpr_allowed_sw;
-+
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_closed_loop_enable_fops,
-+ cpr3_debug_closed_loop_enable_get,
-+ cpr3_debug_closed_loop_enable_set,
-+ "%llu\n");
-+
-+/**
-+ * cpr3_debug_hw_closed_loop_enable_set() - debugfs callback used to change the
-+ * value of the CPR controller use_hw_closed_loop flag which
-+ * switches between software closed-loop and hardware closed-loop
-+ * operation for CPR3 and CPR4 controllers and between open-loop
-+ * and full hardware closed-loop operation for CPRh controllers.
-+ * @data: Pointer to private data which is equal to the CPR
-+ * controller pointer
-+ * @val: New value for use_hw_closed_loop
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_debug_hw_closed_loop_enable_set(void *data, u64 val)
-+{
-+ struct cpr3_controller *ctrl = data;
-+ bool use_hw_closed_loop = !!val;
-+ struct cpr3_regulator *vreg;
-+ bool cpr_enabled;
-+ int i, j, k, rc;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ if (ctrl->use_hw_closed_loop == use_hw_closed_loop)
-+ goto done;
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ rc = cpr3_ctrl_clear_cpr4_config(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ cpr3_ctrl_loop_disable(ctrl);
-+
-+ ctrl->use_hw_closed_loop = use_hw_closed_loop;
-+
-+ cpr_enabled = ctrl->cpr_enabled;
-+
-+ /* Ensure that CPR clocks are enabled before writing to registers. */
-+ if (!cpr_enabled) {
-+ rc = cpr3_clock_enable(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc);
-+ goto done;
-+ }
-+ ctrl->cpr_enabled = true;
-+ }
-+
-+ if (ctrl->use_hw_closed_loop)
-+ cpr3_write(ctrl, CPR3_REG_IRQ_EN, 0);
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL,
-+ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK,
-+ ctrl->use_hw_closed_loop
-+ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE
-+ : CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE);
-+ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP,
-+ ctrl->use_hw_closed_loop
-+ ? CPR3_HW_CLOSED_LOOP_ENABLE
-+ : CPR3_HW_CLOSED_LOOP_DISABLE);
-+ }
-+
-+ /* Turn off CPR clocks if they were off before this function call. */
-+ if (!cpr_enabled) {
-+ cpr3_clock_disable(ctrl);
-+ ctrl->cpr_enabled = false;
-+ }
-+
-+ if (ctrl->use_hw_closed_loop && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ rc = regulator_enable(ctrl->vdd_limit_regulator);
-+ if (rc) {
-+ cpr3_err(ctrl, "CPR limit regulator enable failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ } else if (!ctrl->use_hw_closed_loop
-+ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ rc = regulator_disable(ctrl->vdd_limit_regulator);
-+ if (rc) {
-+ cpr3_err(ctrl, "CPR limit regulator disable failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ /*
-+ * Due to APM and mem-acc floor restriction constraints,
-+ * the closed-loop voltage may be different when using
-+ * software closed-loop vs hardware closed-loop. Therefore,
-+ * reset the cached closed-loop voltage for all corners to the
-+ * corresponding open-loop voltage when switching between
-+ * SW and HW closed-loop mode.
-+ */
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+ for (k = 0; k < vreg->corner_count; k++)
-+ vreg->corner[k].last_volt
-+ = vreg->corner[k].open_loop_volt;
-+ }
-+ }
-+
-+ /* Skip last_volt caching */
-+ ctrl->last_corner_was_closed_loop = false;
-+
-+ rc = cpr3_regulator_update_ctrl_state(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not change CPR HW closed-loop enable state=%u, rc=%d\n",
-+ use_hw_closed_loop, rc);
-+ goto done;
-+ }
-+
-+ cpr3_debug(ctrl, "CPR mode=%s\n",
-+ use_hw_closed_loop ?
-+ "HW closed-loop" : "SW closed-loop");
-+done:
-+ mutex_unlock(&ctrl->lock);
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_debug_hw_closed_loop_enable_get() - debugfs callback used to retrieve
-+ * the value of the CPR controller use_hw_closed_loop flag which
-+ * indicates if hardware closed-loop operation is being used in
-+ * place of software closed-loop operation
-+ * @data: Pointer to private data which is equal to the CPR
-+ * controller pointer
-+ * @val: Output parameter written with the value of
-+ * use_hw_closed_loop
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_debug_hw_closed_loop_enable_get(void *data, u64 *val)
-+{
-+ struct cpr3_controller *ctrl = data;
-+
-+ *val = ctrl->use_hw_closed_loop;
-+
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_hw_closed_loop_enable_fops,
-+ cpr3_debug_hw_closed_loop_enable_get,
-+ cpr3_debug_hw_closed_loop_enable_set,
-+ "%llu\n");
-+
-+/**
-+ * cpr3_debug_trigger_aging_measurement_set() - debugfs callback used to trigger
-+ * another CPR measurement
-+ * @data: Pointer to private data which is equal to the CPR
-+ * controller pointer
-+ * @val: Unused
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_debug_trigger_aging_measurement_set(void *data, u64 val)
-+{
-+ struct cpr3_controller *ctrl = data;
-+ int rc;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ rc = cpr3_ctrl_clear_cpr4_config(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ cpr3_ctrl_loop_disable(ctrl);
-+
-+ cpr3_regulator_set_aging_ref_adjustment(ctrl, INT_MAX);
-+ ctrl->aging_required = true;
-+ ctrl->aging_succeeded = false;
-+ ctrl->aging_failed = false;
-+
-+ rc = cpr3_regulator_update_ctrl_state(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not update the CPR controller state, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+done:
-+ mutex_unlock(&ctrl->lock);
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_trigger_aging_measurement_fops,
-+ NULL,
-+ cpr3_debug_trigger_aging_measurement_set,
-+ "%llu\n");
-+
-+/**
-+ * cpr3_regulator_debugfs_ctrl_add() - add debugfs files to expose configuration
-+ * data for the CPR controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: none
-+ */
-+static void cpr3_regulator_debugfs_ctrl_add(struct cpr3_controller *ctrl)
-+{
-+ struct dentry *temp, *aggr_dir;
-+ int i;
-+
-+ /* Add cpr3-regulator base directory if it isn't present already. */
-+ if (cpr3_debugfs_base == NULL) {
-+ cpr3_debugfs_base = debugfs_create_dir("cpr3-regulator", NULL);
-+ if (IS_ERR_OR_NULL(cpr3_debugfs_base)) {
-+ cpr3_err(ctrl, "cpr3-regulator debugfs base directory creation failed\n");
-+ cpr3_debugfs_base = NULL;
-+ return;
-+ }
-+ }
-+
-+ ctrl->debugfs = debugfs_create_dir(ctrl->name, cpr3_debugfs_base);
-+ if (IS_ERR_OR_NULL(ctrl->debugfs)) {
-+ cpr3_err(ctrl, "cpr3-regulator controller debugfs directory creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_file("cpr_closed_loop_enable", S_IRUGO | S_IWUSR,
-+ ctrl->debugfs, ctrl,
-+ &cpr3_debug_closed_loop_enable_fops);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "cpr_closed_loop_enable debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ if (ctrl->supports_hw_closed_loop) {
-+ temp = debugfs_create_file("use_hw_closed_loop",
-+ S_IRUGO | S_IWUSR, ctrl->debugfs, ctrl,
-+ &cpr3_debug_hw_closed_loop_enable_fops);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "use_hw_closed_loop debugfs file creation failed\n");
-+ return;
-+ }
-+ }
-+
-+ temp = debugfs_create_int("thread_count", S_IRUGO, ctrl->debugfs,
-+ &ctrl->thread_count);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "thread_count debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ if (ctrl->apm) {
-+ temp = debugfs_create_int("apm_threshold_volt", S_IRUGO,
-+ ctrl->debugfs, &ctrl->apm_threshold_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "apm_threshold_volt debugfs file creation failed\n");
-+ return;
-+ }
-+ }
-+
-+ if (ctrl->aging_required || ctrl->aging_succeeded
-+ || ctrl->aging_failed) {
-+ temp = debugfs_create_int("aging_adj_volt", S_IRUGO,
-+ ctrl->debugfs, &ctrl->aging_ref_adjust_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "aging_adj_volt debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_file("aging_succeeded", S_IRUGO,
-+ ctrl->debugfs, &ctrl->aging_succeeded, &fops_bool_ro);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "aging_succeeded debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_file("aging_failed", S_IRUGO,
-+ ctrl->debugfs, &ctrl->aging_failed, &fops_bool_ro);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "aging_failed debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_file("aging_trigger", S_IWUSR,
-+ ctrl->debugfs, ctrl,
-+ &cpr3_debug_trigger_aging_measurement_fops);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "aging_trigger debugfs file creation failed\n");
-+ return;
-+ }
-+ }
-+
-+ aggr_dir = debugfs_create_dir("max_aggregated_voltages", ctrl->debugfs);
-+ if (IS_ERR_OR_NULL(aggr_dir)) {
-+ cpr3_err(ctrl, "max_aggregated_voltages debugfs directory creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("floor_volt", S_IRUGO, aggr_dir,
-+ &ctrl->aggr_corner.floor_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "aggr floor_volt debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("ceiling_volt", S_IRUGO, aggr_dir,
-+ &ctrl->aggr_corner.ceiling_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "aggr ceiling_volt debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("open_loop_volt", S_IRUGO, aggr_dir,
-+ &ctrl->aggr_corner.open_loop_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "aggr open_loop_volt debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ temp = debugfs_create_int("last_volt", S_IRUGO, aggr_dir,
-+ &ctrl->aggr_corner.last_volt);
-+ if (IS_ERR_OR_NULL(temp)) {
-+ cpr3_err(ctrl, "aggr last_volt debugfs file creation failed\n");
-+ return;
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++)
-+ cpr3_regulator_debugfs_thread_add(&ctrl->thread[i]);
-+}
-+
-+/**
-+ * cpr3_regulator_debugfs_ctrl_remove() - remove debugfs files for the CPR
-+ * controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Note, this function must be called after the controller has been removed from
-+ * cpr3_controller_list and while the cpr3_controller_list_mutex lock is held.
-+ *
-+ * Return: none
-+ */
-+static void cpr3_regulator_debugfs_ctrl_remove(struct cpr3_controller *ctrl)
-+{
-+ if (list_empty(&cpr3_controller_list)) {
-+ debugfs_remove_recursive(cpr3_debugfs_base);
-+ cpr3_debugfs_base = NULL;
-+ } else {
-+ debugfs_remove_recursive(ctrl->debugfs);
-+ }
-+}
-+
-+/**
-+ * cpr3_regulator_init_ctrl_data() - performs initialization of CPR controller
-+ * elements
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_init_ctrl_data(struct cpr3_controller *ctrl)
-+{
-+ /* Read the initial vdd voltage from hardware. */
-+ ctrl->aggr_corner.last_volt
-+ = regulator_get_voltage(ctrl->vdd_regulator);
-+ if (ctrl->aggr_corner.last_volt < 0) {
-+ cpr3_err(ctrl, "regulator_get_voltage(vdd) failed, rc=%d\n",
-+ ctrl->aggr_corner.last_volt);
-+ return ctrl->aggr_corner.last_volt;
-+ }
-+ ctrl->aggr_corner.open_loop_volt = ctrl->aggr_corner.last_volt;
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_init_vreg_data() - performs initialization of common CPR3
-+ * regulator elements and validate aging configurations
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_init_vreg_data(struct cpr3_regulator *vreg)
-+{
-+ int i, j;
-+ bool init_aging;
-+
-+ vreg->current_corner = CPR3_REGULATOR_CORNER_INVALID;
-+ vreg->last_closed_loop_corner = CPR3_REGULATOR_CORNER_INVALID;
-+
-+ init_aging = vreg->aging_allowed && vreg->thread->ctrl->aging_required;
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ vreg->corner[i].last_volt = vreg->corner[i].open_loop_volt;
-+ vreg->corner[i].irq_en = CPR3_IRQ_UP | CPR3_IRQ_DOWN;
-+
-+ vreg->corner[i].ro_mask = 0;
-+ for (j = 0; j < CPR3_RO_COUNT; j++) {
-+ if (vreg->corner[i].target_quot[j] == 0)
-+ vreg->corner[i].ro_mask |= BIT(j);
-+ }
-+
-+ if (init_aging) {
-+ vreg->corner[i].unaged_floor_volt
-+ = vreg->corner[i].floor_volt;
-+ vreg->corner[i].unaged_ceiling_volt
-+ = vreg->corner[i].ceiling_volt;
-+ vreg->corner[i].unaged_open_loop_volt
-+ = vreg->corner[i].open_loop_volt;
-+ }
-+
-+ if (vreg->aging_allowed) {
-+ if (vreg->corner[i].unaged_floor_volt <= 0) {
-+ cpr3_err(vreg, "invalid unaged_floor_volt[%d] = %d\n",
-+ i, vreg->corner[i].unaged_floor_volt);
-+ return -EINVAL;
-+ }
-+ if (vreg->corner[i].unaged_ceiling_volt <= 0) {
-+ cpr3_err(vreg, "invalid unaged_ceiling_volt[%d] = %d\n",
-+ i, vreg->corner[i].unaged_ceiling_volt);
-+ return -EINVAL;
-+ }
-+ if (vreg->corner[i].unaged_open_loop_volt <= 0) {
-+ cpr3_err(vreg, "invalid unaged_open_loop_volt[%d] = %d\n",
-+ i, vreg->corner[i].unaged_open_loop_volt);
-+ return -EINVAL;
-+ }
-+ }
-+ }
-+
-+ if (vreg->aging_allowed && vreg->corner[vreg->aging_corner].ceiling_volt
-+ > vreg->thread->ctrl->aging_ref_volt) {
-+ cpr3_err(vreg, "aging corner %d ceiling voltage = %d > aging ref voltage = %d uV\n",
-+ vreg->aging_corner,
-+ vreg->corner[vreg->aging_corner].ceiling_volt,
-+ vreg->thread->ctrl->aging_ref_volt);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_suspend() - perform common required CPR3 power down steps
-+ * before the system enters suspend
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_regulator_suspend(struct cpr3_controller *ctrl)
-+{
-+ int rc;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ rc = cpr3_ctrl_clear_cpr4_config(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n",
-+ rc);
-+ mutex_unlock(&ctrl->lock);
-+ return rc;
-+ }
-+ }
-+
-+ cpr3_ctrl_loop_disable(ctrl);
-+
-+ rc = cpr3_closed_loop_disable(ctrl);
-+ if (rc)
-+ cpr3_err(ctrl, "could not disable CPR, rc=%d\n", rc);
-+
-+ ctrl->cpr_suspended = true;
-+
-+ mutex_unlock(&ctrl->lock);
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_resume() - perform common required CPR3 power up steps after
-+ * the system resumes from suspend
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_regulator_resume(struct cpr3_controller *ctrl)
-+{
-+ int rc;
-+
-+ mutex_lock(&ctrl->lock);
-+
-+ ctrl->cpr_suspended = false;
-+ rc = cpr3_regulator_update_ctrl_state(ctrl);
-+ if (rc)
-+ cpr3_err(ctrl, "could not enable CPR, rc=%d\n", rc);
-+
-+ mutex_unlock(&ctrl->lock);
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_regulator_validate_controller() - verify the data passed in via the
-+ * cpr3_controller data structure
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_regulator_validate_controller(struct cpr3_controller *ctrl)
-+{
-+ struct cpr3_thread *thread;
-+ struct cpr3_regulator *vreg;
-+ int i, j, allow_boost_vreg_count = 0;
-+
-+ if (!ctrl->vdd_regulator) {
-+ cpr3_err(ctrl, "vdd regulator missing\n");
-+ return -EINVAL;
-+ } else if (ctrl->sensor_count <= 0
-+ || ctrl->sensor_count > CPR3_MAX_SENSOR_COUNT) {
-+ cpr3_err(ctrl, "invalid CPR sensor count=%d\n",
-+ ctrl->sensor_count);
-+ return -EINVAL;
-+ } else if (!ctrl->sensor_owner) {
-+ cpr3_err(ctrl, "CPR sensor ownership table missing\n");
-+ return -EINVAL;
-+ }
-+
-+ if (ctrl->aging_required) {
-+ for (i = 0; i < ctrl->aging_sensor_count; i++) {
-+ if (ctrl->aging_sensor[i].sensor_id
-+ >= ctrl->sensor_count) {
-+ cpr3_err(ctrl, "aging_sensor[%d] id=%u is not in the value range 0-%d",
-+ i, ctrl->aging_sensor[i].sensor_id,
-+ ctrl->sensor_count - 1);
-+ return -EINVAL;
-+ }
-+ }
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ thread = &ctrl->thread[i];
-+ for (j = 0; j < thread->vreg_count; j++) {
-+ vreg = &thread->vreg[j];
-+ if (vreg->allow_boost)
-+ allow_boost_vreg_count++;
-+ }
-+ }
-+
-+ if (allow_boost_vreg_count > 1) {
-+ /*
-+ * Boost feature is not allowed to be used for more
-+ * than one CPR3 regulator of a CPR3 controller.
-+ */
-+ cpr3_err(ctrl, "Boost feature is enabled for more than one regulator\n");
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_panic_callback() - panic notification callback function. This function
-+ * is invoked when a kernel panic occurs.
-+ * @nfb: Notifier block pointer of CPR3 controller
-+ * @event: Value passed unmodified to notifier function
-+ * @data: Pointer passed unmodified to notifier function
-+ *
-+ * Return: NOTIFY_OK
-+ */
-+static int cpr3_panic_callback(struct notifier_block *nfb,
-+ unsigned long event, void *data)
-+{
-+ struct cpr3_controller *ctrl = container_of(nfb,
-+ struct cpr3_controller, panic_notifier);
-+ struct cpr3_panic_regs_info *regs_info = ctrl->panic_regs_info;
-+ struct cpr3_reg_info *reg;
-+ int i = 0;
-+
-+ for (i = 0; i < regs_info->reg_count; i++) {
-+ reg = &(regs_info->regs[i]);
-+ reg->value = readl_relaxed(reg->virt_addr);
-+ pr_err("%s[0x%08x] = 0x%08x\n", reg->name, reg->addr,
-+ reg->value);
-+ }
-+ /*
-+ * Barrier to ensure that the information has been updated in the
-+ * structure.
-+ */
-+ mb();
-+
-+ return NOTIFY_OK;
-+}
-+
-+/**
-+ * cpr3_regulator_register() - register the regulators for a CPR3 controller and
-+ * perform CPR hardware initialization
-+ * @pdev: Platform device pointer for the CPR3 controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_regulator_register(struct platform_device *pdev,
-+ struct cpr3_controller *ctrl)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct resource *res;
-+ int i, j, rc;
-+
-+ if (!dev->of_node) {
-+ dev_err(dev, "%s: Device tree node is missing\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ if (!ctrl || !ctrl->name) {
-+ dev_err(dev, "%s: CPR controller data is missing\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ rc = cpr3_regulator_validate_controller(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "controller validation failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ mutex_init(&ctrl->lock);
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cpr_ctrl");
-+ if (!res || !res->start) {
-+ cpr3_err(ctrl, "CPR controller address is missing\n");
-+ return -ENXIO;
-+ }
-+ ctrl->cpr_ctrl_base = devm_ioremap(dev, res->start, resource_size(res));
-+
-+ if (ctrl->aging_possible_mask) {
-+ /*
-+ * Aging possible register address is required if an aging
-+ * possible mask has been specified.
-+ */
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "aging_allowed");
-+ if (!res || !res->start) {
-+ cpr3_err(ctrl, "CPR aging allowed address is missing\n");
-+ return -ENXIO;
-+ }
-+ ctrl->aging_possible_reg = devm_ioremap(dev, res->start,
-+ resource_size(res));
-+ }
-+
-+ ctrl->irq = platform_get_irq_byname(pdev, "cpr");
-+ if (ctrl->irq < 0) {
-+ cpr3_err(ctrl, "missing CPR interrupt\n");
-+ return ctrl->irq;
-+ }
-+
-+ if (ctrl->supports_hw_closed_loop) {
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ ctrl->ceiling_irq = platform_get_irq_byname(pdev,
-+ "ceiling");
-+ if (ctrl->ceiling_irq < 0) {
-+ cpr3_err(ctrl, "missing ceiling interrupt\n");
-+ return ctrl->ceiling_irq;
-+ }
-+ }
-+ }
-+
-+ rc = cpr3_regulator_init_ctrl_data(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "CPR controller data initialization failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ rc = cpr3_regulator_init_vreg_data(
-+ &ctrl->thread[i].vreg[j]);
-+ if (rc)
-+ return rc;
-+ cpr3_print_quots(&ctrl->thread[i].vreg[j]);
-+ }
-+ }
-+
-+ /*
-+ * Add the maximum possible aging voltage margin until it is possible
-+ * to perform an aging measurement.
-+ */
-+ if (ctrl->aging_required)
-+ cpr3_regulator_set_aging_ref_adjustment(ctrl, INT_MAX);
-+
-+ rc = cpr3_regulator_init_ctrl(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "CPR controller initialization failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ /* Register regulator devices for all threads. */
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ rc = cpr3_regulator_vreg_register(
-+ &ctrl->thread[i].vreg[j]);
-+ if (rc) {
-+ cpr3_err(&ctrl->thread[i].vreg[j], "failed to register regulator, rc=%d\n",
-+ rc);
-+ goto free_regulators;
-+ }
-+ }
-+ }
-+
-+ rc = devm_request_threaded_irq(dev, ctrl->irq, NULL,
-+ cpr3_irq_handler,
-+ IRQF_ONESHOT |
-+ IRQF_TRIGGER_RISING,
-+ "cpr3", ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not request IRQ %d, rc=%d\n",
-+ ctrl->irq, rc);
-+ goto free_regulators;
-+ }
-+
-+ if (ctrl->supports_hw_closed_loop &&
-+ ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) {
-+ rc = devm_request_threaded_irq(dev, ctrl->ceiling_irq, NULL,
-+ cpr3_ceiling_irq_handler,
-+ IRQF_ONESHOT | IRQF_TRIGGER_RISING,
-+ "cpr3_ceiling", ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not request ceiling IRQ %d, rc=%d\n",
-+ ctrl->ceiling_irq, rc);
-+ goto free_regulators;
-+ }
-+ }
-+
-+ mutex_lock(&cpr3_controller_list_mutex);
-+ cpr3_regulator_debugfs_ctrl_add(ctrl);
-+ list_add(&ctrl->list, &cpr3_controller_list);
-+ mutex_unlock(&cpr3_controller_list_mutex);
-+
-+ if (ctrl->panic_regs_info) {
-+ /* Register panic notification call back */
-+ ctrl->panic_notifier.notifier_call = cpr3_panic_callback;
-+ atomic_notifier_chain_register(&panic_notifier_list,
-+ &ctrl->panic_notifier);
-+ }
-+
-+ return 0;
-+
-+free_regulators:
-+ for (i = 0; i < ctrl->thread_count; i++)
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++)
-+ if (!IS_ERR_OR_NULL(ctrl->thread[i].vreg[j].rdev))
-+ regulator_unregister(
-+ ctrl->thread[i].vreg[j].rdev);
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_open_loop_regulator_register() - register the regulators for a CPR3
-+ * controller which will always work in Open loop and
-+ * won't support close loop.
-+ * @pdev: Platform device pointer for the CPR3 controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_open_loop_regulator_register(struct platform_device *pdev,
-+ struct cpr3_controller *ctrl)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct cpr3_regulator *vreg;
-+ int i, j, rc;
-+
-+ if (!dev->of_node) {
-+ dev_err(dev, "%s: Device tree node is missing\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ if (!ctrl || !ctrl->name) {
-+ dev_err(dev, "%s: CPR controller data is missing\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ if (!ctrl->vdd_regulator) {
-+ cpr3_err(ctrl, "vdd regulator missing\n");
-+ return -EINVAL;
-+ }
-+
-+ mutex_init(&ctrl->lock);
-+
-+ rc = cpr3_regulator_init_ctrl_data(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "CPR controller data initialization failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ vreg = &ctrl->thread[i].vreg[j];
-+ vreg->corner[i].last_volt =
-+ vreg->corner[i].open_loop_volt;
-+ }
-+ }
-+
-+ /* Register regulator devices for all threads. */
-+ for (i = 0; i < ctrl->thread_count; i++) {
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++) {
-+ rc = cpr3_regulator_vreg_register(
-+ &ctrl->thread[i].vreg[j]);
-+ if (rc) {
-+ cpr3_err(&ctrl->thread[i].vreg[j], "failed to register regulator, rc=%d\n",
-+ rc);
-+ goto free_regulators;
-+ }
-+ }
-+ }
-+
-+ mutex_lock(&cpr3_controller_list_mutex);
-+ list_add(&ctrl->list, &cpr3_controller_list);
-+ mutex_unlock(&cpr3_controller_list_mutex);
-+
-+ return 0;
-+
-+free_regulators:
-+ for (i = 0; i < ctrl->thread_count; i++)
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++)
-+ if (!IS_ERR_OR_NULL(ctrl->thread[i].vreg[j].rdev))
-+ regulator_unregister(
-+ ctrl->thread[i].vreg[j].rdev);
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_regulator_unregister() - unregister the regulators for a CPR3 controller
-+ * and perform CPR hardware shutdown
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_regulator_unregister(struct cpr3_controller *ctrl)
-+{
-+ int i, j, rc = 0;
-+
-+ mutex_lock(&cpr3_controller_list_mutex);
-+ list_del(&ctrl->list);
-+ cpr3_regulator_debugfs_ctrl_remove(ctrl);
-+ mutex_unlock(&cpr3_controller_list_mutex);
-+
-+ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) {
-+ rc = cpr3_ctrl_clear_cpr4_config(ctrl);
-+ if (rc)
-+ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n",
-+ rc);
-+ }
-+
-+ cpr3_ctrl_loop_disable(ctrl);
-+
-+ cpr3_closed_loop_disable(ctrl);
-+
-+ if (ctrl->vdd_limit_regulator) {
-+ regulator_disable(ctrl->vdd_limit_regulator);
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++)
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++)
-+ regulator_unregister(ctrl->thread[i].vreg[j].rdev);
-+
-+ if (ctrl->panic_notifier.notifier_call)
-+ atomic_notifier_chain_unregister(&panic_notifier_list,
-+ &ctrl->panic_notifier);
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_open_loop_regulator_unregister() - unregister the regulators for a CPR3
-+ * open loop controller and perform CPR hardware shutdown
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_open_loop_regulator_unregister(struct cpr3_controller *ctrl)
-+{
-+ int i, j;
-+
-+ mutex_lock(&cpr3_controller_list_mutex);
-+ list_del(&ctrl->list);
-+ mutex_unlock(&cpr3_controller_list_mutex);
-+
-+ if (ctrl->vdd_limit_regulator) {
-+ regulator_disable(ctrl->vdd_limit_regulator);
-+ }
-+
-+ for (i = 0; i < ctrl->thread_count; i++)
-+ for (j = 0; j < ctrl->thread[i].vreg_count; j++)
-+ regulator_unregister(ctrl->thread[i].vreg[j].rdev);
-+
-+ if (ctrl->panic_notifier.notifier_call)
-+ atomic_notifier_chain_unregister(&panic_notifier_list,
-+ &ctrl->panic_notifier);
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/regulator/cpr3-regulator.h
-@@ -0,0 +1,1211 @@
-+/*
-+ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __REGULATOR_CPR3_REGULATOR_H__
-+#define __REGULATOR_CPR3_REGULATOR_H__
-+
-+#include <linux/clk.h>
-+#include <linux/mutex.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/power/qcom/apm.h>
-+#include <linux/regulator/driver.h>
-+
-+struct cpr3_controller;
-+struct cpr3_thread;
-+
-+/**
-+ * struct cpr3_fuse_param - defines one contiguous segment of a fuse parameter
-+ * that is contained within a given row.
-+ * @row: Fuse row number
-+ * @bit_start: The first bit within the row of the fuse parameter segment
-+ * @bit_end: The last bit within the row of the fuse parameter segment
-+ *
-+ * Each fuse row is 64 bits in length. bit_start and bit_end may take values
-+ * from 0 to 63. bit_start must be less than or equal to bit_end.
-+ */
-+struct cpr3_fuse_param {
-+ unsigned row;
-+ unsigned bit_start;
-+ unsigned bit_end;
-+};
-+
-+/* Each CPR3 sensor has 16 ring oscillators */
-+#define CPR3_RO_COUNT 16
-+
-+/* The maximum number of sensors that can be present on a single CPR loop. */
-+#define CPR3_MAX_SENSOR_COUNT 256
-+
-+/* This constant is used when allocating array printing buffers. */
-+#define MAX_CHARS_PER_INT 10
-+
-+/**
-+ * struct cpr4_sdelta - CPR4 controller specific data structure for the sdelta
-+ * adjustment table which is used to adjust the VDD supply
-+ * voltage automatically based upon the temperature and/or
-+ * the number of online CPU cores.
-+ * @allow_core_count_adj: Core count adjustments are allowed.
-+ * @allow_temp_adj: Temperature based adjustments are allowed.
-+ * @max_core_count: Maximum number of cores considered for core count
-+ * adjustment logic.
-+ * @temp_band_count: Number of temperature bands considered for temperature
-+ * based adjustment logic.
-+ * @cap_volt: CAP in uV to apply to SDELTA margins with multiple
-+ * cpr3-regulators defined for single controller.
-+ * @table: SDELTA table with per-online-core and temperature based
-+ * adjustments of size (max_core_count * temp_band_count)
-+ * Outer: core count
-+ * Inner: temperature band
-+ * Each element has units of VDD supply steps. Positive
-+ * values correspond to a reduction in voltage and negative
-+ * value correspond to an increase (this follows the SDELTA
-+ * register semantics).
-+ * @allow_boost: Voltage boost allowed.
-+ * @boost_num_cores: The number of online cores at which the boost voltage
-+ * adjustments will be applied
-+ * @boost_table: SDELTA table with boost voltage adjustments of size
-+ * temp_band_count. Each element has units of VDD supply
-+ * steps. Positive values correspond to a reduction in
-+ * voltage and negative value correspond to an increase
-+ * (this follows the SDELTA register semantics).
-+ */
-+struct cpr4_sdelta {
-+ bool allow_core_count_adj;
-+ bool allow_temp_adj;
-+ int max_core_count;
-+ int temp_band_count;
-+ int cap_volt;
-+ int *table;
-+ bool allow_boost;
-+ int boost_num_cores;
-+ int *boost_table;
-+};
-+
-+/**
-+ * struct cpr3_corner - CPR3 virtual voltage corner data structure
-+ * @floor_volt: CPR closed-loop floor voltage in microvolts
-+ * @ceiling_volt: CPR closed-loop ceiling voltage in microvolts
-+ * @open_loop_volt: CPR open-loop voltage (i.e. initial voltage) in
-+ * microvolts
-+ * @last_volt: Last known settled CPR closed-loop voltage which is used
-+ * when switching to a new corner
-+ * @abs_ceiling_volt: The absolute CPR closed-loop ceiling voltage in
-+ * microvolts. This is used to limit the ceiling_volt
-+ * value when it is increased as a result of aging
-+ * adjustment.
-+ * @unaged_floor_volt: The CPR closed-loop floor voltage in microvolts before
-+ * any aging adjustment is performed
-+ * @unaged_ceiling_volt: The CPR closed-loop ceiling voltage in microvolts
-+ * before any aging adjustment is performed
-+ * @unaged_open_loop_volt: The CPR open-loop voltage (i.e. initial voltage) in
-+ * microvolts before any aging adjusment is performed
-+ * @system_volt: The system-supply voltage in microvolts or corners or
-+ * levels
-+ * @mem_acc_volt: The mem-acc-supply voltage in corners
-+ * @proc_freq: Processor frequency in Hertz. For CPR rev. 3 and 4
-+ * conrollers, this field is only used by platform specific
-+ * CPR3 driver for interpolation. For CPRh-compliant
-+ * controllers, this frequency is also utilized by the
-+ * clock driver to determine the corner to CPU clock
-+ * frequency mappings.
-+ * @cpr_fuse_corner: Fused corner index associated with this virtual corner
-+ * (only used by platform specific CPR3 driver for
-+ * mapping purposes)
-+ * @target_quot: Array of target quotient values to use for each ring
-+ * oscillator (RO) for this corner. A value of 0 should be
-+ * specified as the target quotient for each RO that is
-+ * unused by this corner.
-+ * @ro_scale: Array of CPR ring oscillator (RO) scaling factors. The
-+ * scaling factor for each RO is defined from RO0 to RO15
-+ * with units of QUOT/V. A value of 0 may be specified for
-+ * an RO that is unused.
-+ * @ro_mask: Bitmap where each of the 16 LSBs indicate if the
-+ * corresponding ROs should be masked for this corner
-+ * @irq_en: Bitmap of the CPR interrupts to enable for this corner
-+ * @aging_derate: The amount to derate the aging voltage adjustment
-+ * determined for the reference corner in units of uV/mV.
-+ * E.g. a value of 900 would imply that the adjustment for
-+ * this corner should be 90% (900/1000) of that for the
-+ * reference corner.
-+ * @use_open_loop: Boolean indicating that open-loop (i.e CPR disabled) as
-+ * opposed to closed-loop operation must be used for this
-+ * corner on CPRh controllers.
-+ * @sdelta: The CPR4 controller specific data for this corner. This
-+ * field is applicable for CPR4 controllers.
-+ *
-+ * The value of last_volt is initialized inside of the cpr3_regulator_register()
-+ * call with the open_loop_volt value. It can later be updated to the settled
-+ * VDD supply voltage. The values for unaged_floor_volt, unaged_ceiling_volt,
-+ * and unaged_open_loop_volt are initialized inside of cpr3_regulator_register()
-+ * if ctrl->aging_required == true. These three values must be pre-initialized
-+ * if cpr3_regulator_register() is called with ctrl->aging_required == false and
-+ * ctrl->aging_succeeded == true.
-+ *
-+ * The values of ro_mask and irq_en are initialized inside of the
-+ * cpr3_regulator_register() call.
-+ */
-+struct cpr3_corner {
-+ int floor_volt;
-+ int ceiling_volt;
-+ int cold_temp_open_loop_volt;
-+ int normal_temp_open_loop_volt;
-+ int open_loop_volt;
-+ int last_volt;
-+ int abs_ceiling_volt;
-+ int unaged_floor_volt;
-+ int unaged_ceiling_volt;
-+ int unaged_open_loop_volt;
-+ int system_volt;
-+ int mem_acc_volt;
-+ u32 proc_freq;
-+ int cpr_fuse_corner;
-+ u32 target_quot[CPR3_RO_COUNT];
-+ u32 ro_scale[CPR3_RO_COUNT];
-+ u32 ro_mask;
-+ u32 irq_en;
-+ int aging_derate;
-+ bool use_open_loop;
-+ struct cpr4_sdelta *sdelta;
-+};
-+
-+/**
-+ * struct cprh_corner_band - CPRh controller specific data structure which
-+ * encapsulates the range of corners and the SDELTA
-+ * adjustment table to be applied to the corners within
-+ * the min and max bounds of the corner band.
-+ * @corner: Corner number which defines the corner band boundary
-+ * @sdelta: The SDELTA adjustment table which contains core-count
-+ * and temp based margin adjustments that are applicable
-+ * to the corner band.
-+ */
-+struct cprh_corner_band {
-+ int corner;
-+ struct cpr4_sdelta *sdelta;
-+};
-+
-+/**
-+ * struct cpr3_fuse_parameters - CPR4 fuse specific data structure which has
-+ * the required fuse parameters need for Close Loop CPR
-+ * @(*apss_ro_sel_param)[2]: Pointer to RO select fuse details
-+ * @(*apss_init_voltage_param)[2]: Pointer to Target voltage fuse details
-+ * @(*apss_target_quot_param)[2]: Pointer to Target quot fuse details
-+ * @(*apss_quot_offset_param)[2]: Pointer to quot offset fuse details
-+ * @cpr_fusing_rev_param: Pointer to CPR revision fuse details
-+ * @apss_speed_bin_param: Pointer to Speed bin fuse details
-+ * @cpr_boost_fuse_cfg_param: Pointer to Boost fuse cfg details
-+ * @apss_boost_fuse_volt_param: Pointer to Boost fuse volt details
-+ * @misc_fuse_volt_adj_param: Pointer to Misc fuse volt fuse details
-+ */
-+struct cpr3_fuse_parameters {
-+ struct cpr3_fuse_param (*apss_ro_sel_param)[2];
-+ struct cpr3_fuse_param (*apss_init_voltage_param)[2];
-+ struct cpr3_fuse_param (*apss_target_quot_param)[2];
-+ struct cpr3_fuse_param (*apss_quot_offset_param)[2];
-+ struct cpr3_fuse_param *cpr_fusing_rev_param;
-+ struct cpr3_fuse_param *apss_speed_bin_param;
-+ struct cpr3_fuse_param *cpr_boost_fuse_cfg_param;
-+ struct cpr3_fuse_param *apss_boost_fuse_volt_param;
-+ struct cpr3_fuse_param *misc_fuse_volt_adj_param;
-+};
-+
-+struct cpr4_mem_acc_func {
-+ void (*set_mem_acc)(struct regulator_dev *);
-+ void (*clear_mem_acc)(struct regulator_dev *);
-+};
-+
-+/**
-+ * struct cpr4_reg_data - CPR4 regulator specific data structure which is
-+ * target specific
-+ * @cpr_valid_fuse_count: Number of valid fuse corners
-+ * @fuse_ref_volt: Pointer to fuse reference voltage
-+ * @fuse_step_volt: CPR step voltage available in fuse
-+ * @cpr_clk_rate: CPR clock rate
-+ * @boost_fuse_ref_volt: Boost fuse reference voltage
-+ * @boost_ceiling_volt: Boost ceiling voltage
-+ * @boost_floor_volt: Boost floor voltage
-+ * @cpr3_fuse_params: Pointer to CPR fuse parameters
-+ * @mem_acc_funcs: Pointer to MEM ACC set/clear functions
-+ **/
-+struct cpr4_reg_data {
-+ u32 cpr_valid_fuse_count;
-+ int *fuse_ref_volt;
-+ u32 fuse_step_volt;
-+ u32 cpr_clk_rate;
-+ int boost_fuse_ref_volt;
-+ int boost_ceiling_volt;
-+ int boost_floor_volt;
-+ struct cpr3_fuse_parameters *cpr3_fuse_params;
-+ struct cpr4_mem_acc_func *mem_acc_funcs;
-+};
-+/**
-+ * struct cpr3_reg_data - CPR3 regulator specific data structure which is
-+ * target specific
-+ * @cpr_valid_fuse_count: Number of valid fuse corners
-+ * @(*init_voltage_param)[2]: Pointer to Target voltage fuse details
-+ * @fuse_ref_volt: Pointer to fuse reference voltage
-+ * @fuse_step_volt: CPR step voltage available in fuse
-+ * @cpr_clk_rate: CPR clock rate
-+ * @cpr3_fuse_params: Pointer to CPR fuse parameters
-+ **/
-+struct cpr3_reg_data {
-+ u32 cpr_valid_fuse_count;
-+ struct cpr3_fuse_param (*init_voltage_param)[2];
-+ int *fuse_ref_volt;
-+ u32 fuse_step_volt;
-+ u32 cpr_clk_rate;
-+};
-+
-+/**
-+ * struct cpr3_regulator - CPR3 logical regulator instance associated with a
-+ * given CPR3 hardware thread
-+ * @of_node: Device node associated with the device tree child node
-+ * of this CPR3 regulator
-+ * @thread: Pointer to the CPR3 thread which manages this CPR3
-+ * regulator
-+ * @name: Unique name for this CPR3 regulator which is filled
-+ * using the device tree regulator-name property
-+ * @rdesc: Regulator description for this CPR3 regulator
-+ * @rdev: Regulator device pointer for the regulator registered
-+ * for this CPR3 regulator
-+ * @mem_acc_regulator: Pointer to the optional mem-acc supply regulator used
-+ * to manage memory circuitry settings based upon CPR3
-+ * regulator output voltage.
-+ * @corner: Array of all corners supported by this CPR3 regulator
-+ * @corner_count: The number of elements in the corner array
-+ * @corner_band: Array of all corner bands supported by CPRh compatible
-+ * controllers
-+ * @cpr4_regulator_data Target specific cpr4 regulator data
-+ * @cpr3_regulator_data Target specific cpr3 regulator data
-+ * @corner_band_count: The number of elements in the corner band array
-+ * @platform_fuses: Pointer to platform specific CPR fuse data (only used by
-+ * platform specific CPR3 driver)
-+ * @speed_bin_fuse: Value read from the speed bin fuse parameter
-+ * @speed_bins_supported: The number of speed bins supported by the device tree
-+ * configuration for this CPR3 regulator
-+ * @cpr_rev_fuse: Value read from the CPR fusing revision fuse parameter
-+ * @fuse_combo: Platform specific enum value identifying the specific
-+ * combination of fuse values found on a given chip
-+ * @fuse_combos_supported: The number of fuse combinations supported by the
-+ * device tree configuration for this CPR3 regulator
-+ * @fuse_corner_count: Number of corners defined by fuse parameters
-+ * @fuse_corner_map: Array of length fuse_corner_count which specifies the
-+ * highest corner associated with each fuse corner. Note
-+ * that each element must correspond to a valid corner
-+ * and that element values must be strictly increasing.
-+ * Also, it is acceptable for the lowest fuse corner to map
-+ * to a corner other than the lowest. Likewise, it is
-+ * acceptable for the highest fuse corner to map to a
-+ * corner other than the highest.
-+ * @fuse_combo_corner_sum: The sum of the corner counts across all fuse combos
-+ * @fuse_combo_offset: The device tree property array offset for the selected
-+ * fuse combo
-+ * @speed_bin_corner_sum: The sum of the corner counts across all speed bins
-+ * This may be specified as 0 if per speed bin parsing
-+ * support is not required.
-+ * @speed_bin_offset: The device tree property array offset for the selected
-+ * speed bin
-+ * @fuse_combo_corner_band_sum: The sum of the corner band counts across all
-+ * fuse combos
-+ * @fuse_combo_corner_band_offset: The device tree property array offset for
-+ * the corner band count corresponding to the selected
-+ * fuse combo
-+ * @speed_bin_corner_band_sum: The sum of the corner band counts across all
-+ * speed bins. This may be specified as 0 if per speed bin
-+ * parsing support is not required
-+ * @speed_bin_corner_band_offset: The device tree property array offset for the
-+ * corner band count corresponding to the selected speed
-+ * bin
-+ * @pd_bypass_mask: Bit mask of power domains associated with this CPR3
-+ * regulator
-+ * @dynamic_floor_corner: Index identifying the voltage corner for the CPR3
-+ * regulator whose last_volt value should be used as the
-+ * global CPR floor voltage if all of the power domains
-+ * associated with this CPR3 regulator are bypassed
-+ * @uses_dynamic_floor: Boolean flag indicating that dynamic_floor_corner should
-+ * be utilized for the CPR3 regulator
-+ * @current_corner: Index identifying the currently selected voltage corner
-+ * for the CPR3 regulator or less than 0 if no corner has
-+ * been requested
-+ * @last_closed_loop_corner: Index identifying the last voltage corner for the
-+ * CPR3 regulator which was configured when operating in
-+ * CPR closed-loop mode or less than 0 if no corner has
-+ * been requested. CPR registers are only written to when
-+ * using closed-loop mode.
-+ * @aggregated: Boolean flag indicating that this CPR3 regulator
-+ * participated in the last aggregation event
-+ * @debug_corner: Index identifying voltage corner used for displaying
-+ * corner configuration values in debugfs
-+ * @vreg_enabled: Boolean defining the enable state of the CPR3
-+ * regulator's regulator within the regulator framework.
-+ * @aging_allowed: Boolean defining if CPR aging adjustments are allowed
-+ * for this CPR3 regulator given the fuse combo of the
-+ * device
-+ * @aging_allow_open_loop_adj: Boolean defining if the open-loop voltage of each
-+ * corner of this regulator should be adjusted as a result
-+ * of an aging measurement. This flag can be set to false
-+ * when the open-loop voltage adjustments have been
-+ * specified such that they include the maximum possible
-+ * aging adjustment. This flag is only used if
-+ * aging_allowed == true.
-+ * @aging_corner: The corner that should be configured for this regulator
-+ * when an aging measurement is performed.
-+ * @aging_max_adjust_volt: The maximum aging voltage margin in microvolts that
-+ * may be added to the target quotients of this regulator.
-+ * A value of 0 may be specified if this regulator does not
-+ * require any aging adjustment.
-+ * @allow_core_count_adj: Core count adjustments are allowed for this regulator.
-+ * @allow_temp_adj: Temperature based adjustments are allowed for this
-+ * regulator.
-+ * @max_core_count: Maximum number of cores considered for core count
-+ * adjustment logic.
-+ * @allow_boost: Voltage boost allowed for this regulator.
-+ *
-+ * This structure contains both configuration and runtime state data. The
-+ * elements current_corner, last_closed_loop_corner, aggregated, debug_corner,
-+ * and vreg_enabled are state variables.
-+ */
-+struct cpr3_regulator {
-+ struct device_node *of_node;
-+ struct cpr3_thread *thread;
-+ const char *name;
-+ struct regulator_desc rdesc;
-+ struct regulator_dev *rdev;
-+ struct regulator *mem_acc_regulator;
-+ struct cpr3_corner *corner;
-+ int corner_count;
-+ struct cprh_corner_band *corner_band;
-+ struct cpr4_reg_data *cpr4_regulator_data;
-+ struct cpr3_reg_data *cpr3_regulator_data;
-+ u32 corner_band_count;
-+
-+ void *platform_fuses;
-+ int speed_bin_fuse;
-+ int speed_bins_supported;
-+ int cpr_rev_fuse;
-+ int part_type;
-+ int part_type_supported;
-+ int fuse_combo;
-+ int fuse_combos_supported;
-+ int fuse_corner_count;
-+ int *fuse_corner_map;
-+ int fuse_combo_corner_sum;
-+ int fuse_combo_offset;
-+ int speed_bin_corner_sum;
-+ int speed_bin_offset;
-+ int fuse_combo_corner_band_sum;
-+ int fuse_combo_corner_band_offset;
-+ int speed_bin_corner_band_sum;
-+ int speed_bin_corner_band_offset;
-+ u32 pd_bypass_mask;
-+ int dynamic_floor_corner;
-+ bool uses_dynamic_floor;
-+
-+ int current_corner;
-+ int last_closed_loop_corner;
-+ bool aggregated;
-+ int debug_corner;
-+ bool vreg_enabled;
-+
-+ bool aging_allowed;
-+ bool aging_allow_open_loop_adj;
-+ int aging_corner;
-+ int aging_max_adjust_volt;
-+
-+ bool allow_core_count_adj;
-+ bool allow_temp_adj;
-+ int max_core_count;
-+ bool allow_boost;
-+};
-+
-+/**
-+ * struct cpr3_thread - CPR3 hardware thread data structure
-+ * @thread_id: Hardware thread ID
-+ * @of_node: Device node associated with the device tree child node
-+ * of this CPR3 thread
-+ * @ctrl: Pointer to the CPR3 controller which manages this thread
-+ * @vreg: Array of CPR3 regulators handled by the CPR3 thread
-+ * @vreg_count: Number of elements in the vreg array
-+ * @aggr_corner: CPR corner containing the in process aggregated voltage
-+ * and target quotient configurations which will be applied
-+ * @last_closed_loop_aggr_corner: CPR corner containing the most recent
-+ * configurations which were written into hardware
-+ * registers when operating in closed loop mode (i.e. with
-+ * CPR enabled)
-+ * @consecutive_up: The number of consecutive CPR step up events needed to
-+ * to trigger an up interrupt
-+ * @consecutive_down: The number of consecutive CPR step down events needed to
-+ * to trigger a down interrupt
-+ * @up_threshold: The number CPR error steps required to generate an up
-+ * event
-+ * @down_threshold: The number CPR error steps required to generate a down
-+ * event
-+ *
-+ * This structure contains both configuration and runtime state data. The
-+ * elements aggr_corner and last_closed_loop_aggr_corner are state variables.
-+ */
-+struct cpr3_thread {
-+ u32 thread_id;
-+ struct device_node *of_node;
-+ struct cpr3_controller *ctrl;
-+ struct cpr3_regulator *vreg;
-+ int vreg_count;
-+ struct cpr3_corner aggr_corner;
-+ struct cpr3_corner last_closed_loop_aggr_corner;
-+
-+ u32 consecutive_up;
-+ u32 consecutive_down;
-+ u32 up_threshold;
-+ u32 down_threshold;
-+};
-+
-+/* Per CPR controller data */
-+/**
-+ * enum cpr3_mem_acc_corners - Constants which define the number of mem-acc
-+ * regulator corners available in the mem-acc corner map array.
-+ * %CPR3_MEM_ACC_LOW_CORNER: Index in mem-acc corner map array mapping to the
-+ * mem-acc regulator corner
-+ * to be used for low voltage vdd supply
-+ * %CPR3_MEM_ACC_HIGH_CORNER: Index in mem-acc corner map array mapping to the
-+ * mem-acc regulator corner to be used for high
-+ * voltage vdd supply
-+ * %CPR3_MEM_ACC_CORNERS: Number of elements in the mem-acc corner map
-+ * array
-+ */
-+enum cpr3_mem_acc_corners {
-+ CPR3_MEM_ACC_LOW_CORNER = 0,
-+ CPR3_MEM_ACC_HIGH_CORNER = 1,
-+ CPR3_MEM_ACC_CORNERS = 2,
-+};
-+
-+/**
-+ * enum cpr3_count_mode - CPR3 controller count mode which defines the
-+ * method that CPR sensor data is acquired
-+ * %CPR3_COUNT_MODE_ALL_AT_ONCE_MIN: Capture all CPR sensor readings
-+ * simultaneously and report the minimum
-+ * value seen in successive measurements
-+ * %CPR3_COUNT_MODE_ALL_AT_ONCE_MAX: Capture all CPR sensor readings
-+ * simultaneously and report the maximum
-+ * value seen in successive measurements
-+ * %CPR3_COUNT_MODE_STAGGERED: Read one sensor at a time in a
-+ * sequential fashion
-+ * %CPR3_COUNT_MODE_ALL_AT_ONCE_AGE: Capture all CPR aging sensor readings
-+ * simultaneously.
-+ */
-+enum cpr3_count_mode {
-+ CPR3_COUNT_MODE_ALL_AT_ONCE_MIN = 0,
-+ CPR3_COUNT_MODE_ALL_AT_ONCE_MAX = 1,
-+ CPR3_COUNT_MODE_STAGGERED = 2,
-+ CPR3_COUNT_MODE_ALL_AT_ONCE_AGE = 3,
-+};
-+
-+/**
-+ * enum cpr_controller_type - supported CPR controller hardware types
-+ * %CPR_CTRL_TYPE_CPR3: HW has CPR3 controller
-+ * %CPR_CTRL_TYPE_CPR4: HW has CPR4 controller
-+ */
-+enum cpr_controller_type {
-+ CPR_CTRL_TYPE_CPR3,
-+ CPR_CTRL_TYPE_CPR4,
-+};
-+
-+/**
-+ * cpr_setting - supported CPR global settings
-+ * %CPR_DEFAULT: default mode from dts will be used
-+ * %CPR_DISABLED: ceiling voltage will be used for all the corners
-+ * %CPR_OPEN_LOOP_EN: CPR will work in OL
-+ * %CPR_CLOSED_LOOP_EN: CPR will work in CL, if supported
-+ */
-+enum cpr_setting {
-+ CPR_DEFAULT = 0,
-+ CPR_DISABLED = 1,
-+ CPR_OPEN_LOOP_EN = 2,
-+ CPR_CLOSED_LOOP_EN = 3,
-+};
-+
-+/**
-+ * struct cpr3_aging_sensor_info - CPR3 aging sensor information
-+ * @sensor_id The index of the CPR3 sensor to be used in the aging
-+ * measurement.
-+ * @ro_scale The CPR ring oscillator (RO) scaling factor for the
-+ * aging sensor with units of QUOT/V.
-+ * @init_quot_diff: The fused quotient difference between aged and un-aged
-+ * paths that was measured at manufacturing time.
-+ * @measured_quot_diff: The quotient difference measured at runtime.
-+ * @bypass_mask: Bit mask of the CPR sensors that must be bypassed during
-+ * the aging measurement for this sensor
-+ *
-+ * This structure contains both configuration and runtime state data. The
-+ * element measured_quot_diff is a state variable.
-+ */
-+struct cpr3_aging_sensor_info {
-+ u32 sensor_id;
-+ u32 ro_scale;
-+ int init_quot_diff;
-+ int measured_quot_diff;
-+ u32 bypass_mask[CPR3_MAX_SENSOR_COUNT / 32];
-+};
-+
-+/**
-+ * struct cpr3_reg_info - Register information data structure
-+ * @name: Register name
-+ * @addr: Register physical address
-+ * @value: Register content
-+ * @virt_addr: Register virtual address
-+ *
-+ * This data structure is used to dump some critical register contents
-+ * when the device crashes due to a kernel panic.
-+ */
-+struct cpr3_reg_info {
-+ const char *name;
-+ u32 addr;
-+ u32 value;
-+ void __iomem *virt_addr;
-+};
-+
-+/**
-+ * struct cpr3_panic_regs_info - Data structure to dump critical register
-+ * contents.
-+ * @reg_count: Number of elements in the regs array
-+ * @regs: Array of critical registers information
-+ *
-+ * This data structure is used to dump critical register contents when
-+ * the device crashes due to a kernel panic.
-+ */
-+struct cpr3_panic_regs_info {
-+ int reg_count;
-+ struct cpr3_reg_info *regs;
-+};
-+
-+/**
-+ * struct cpr3_controller - CPR3 controller data structure
-+ * @dev: Device pointer for the CPR3 controller device
-+ * @name: Unique name for the CPR3 controller
-+ * @ctrl_id: Controller ID corresponding to the VDD supply number
-+ * that this CPR3 controller manages.
-+ * @cpr_ctrl_base: Virtual address of the CPR3 controller base register
-+ * @fuse_base: Virtual address of fuse row 0
-+ * @aging_possible_reg: Virtual address of an optional platform-specific
-+ * register that must be ready to determine if it is
-+ * possible to perform an aging measurement.
-+ * @list: list head used in a global cpr3-regulator list so that
-+ * cpr3-regulator structs can be found easily in RAM dumps
-+ * @thread: Array of CPR3 threads managed by the CPR3 controller
-+ * @thread_count: Number of elements in the thread array
-+ * @sensor_owner: Array of thread IDs indicating which thread owns a given
-+ * CPR sensor
-+ * @sensor_count: The number of CPR sensors found on the CPR loop managed
-+ * by this CPR controller. Must be equal to the number of
-+ * elements in the sensor_owner array
-+ * @soc_revision: Revision number of the SoC. This may be unused by
-+ * platforms that do not have different behavior for
-+ * different SoC revisions.
-+ * @lock: Mutex lock used to ensure mutual exclusion between
-+ * all of the threads associated with the controller
-+ * @vdd_regulator: Pointer to the VDD supply regulator which this CPR3
-+ * controller manages
-+ * @system_regulator: Pointer to the optional system-supply regulator upon
-+ * which the VDD supply regulator depends.
-+ * @mem_acc_regulator: Pointer to the optional mem-acc supply regulator used
-+ * to manage memory circuitry settings based upon the
-+ * VDD supply output voltage.
-+ * @vdd_limit_regulator: Pointer to the VDD supply limit regulator which is used
-+ * for hardware closed-loop in order specify ceiling and
-+ * floor voltage limits (platform specific)
-+ * @system_supply_max_volt: Voltage in microvolts which corresponds to the
-+ * absolute ceiling voltage of the system-supply
-+ * @mem_acc_threshold_volt: mem-acc threshold voltage in microvolts
-+ * @mem_acc_corner_map: mem-acc regulator corners mapping to low and high
-+ * voltage mem-acc settings for the memories powered by
-+ * this CPR3 controller and its associated CPR3 regulators
-+ * @mem_acc_crossover_volt: Voltage in microvolts corresponding to the voltage
-+ * that the VDD supply must be set to while a MEM ACC
-+ * switch is in progress. This element must be initialized
-+ * for CPRh controllers when a MEM ACC threshold voltage is
-+ * defined.
-+ * @core_clk: Pointer to the CPR3 controller core clock
-+ * @iface_clk: Pointer to the CPR3 interface clock (platform specific)
-+ * @bus_clk: Pointer to the CPR3 bus clock (platform specific)
-+ * @irq: CPR interrupt number
-+ * @irq_affinity_mask: The cpumask for the CPUs which the CPR interrupt should
-+ * have affinity for
-+ * @cpu_hotplug_notifier: CPU hotplug notifier used to reset IRQ affinity when a
-+ * CPU is brought back online
-+ * @ceiling_irq: Interrupt number for the interrupt that is triggered
-+ * when hardware closed-loop attempts to exceed the ceiling
-+ * voltage
-+ * @apm: Handle to the array power mux (APM)
-+ * @apm_threshold_volt: Voltage in microvolts which defines the threshold
-+ * voltage to determine the APM supply selection for
-+ * each corner
-+ * @apm_crossover_volt: Voltage in microvolts corresponding to the voltage that
-+ * the VDD supply must be set to while an APM switch is in
-+ * progress. This element must be initialized for CPRh
-+ * controllers when an APM threshold voltage is defined
-+ * @apm_adj_volt: Minimum difference between APM threshold voltage and
-+ * open-loop voltage which allows the APM threshold voltage
-+ * to be used as a ceiling
-+ * @apm_high_supply: APM supply to configure if VDD voltage is greater than
-+ * or equal to the APM threshold voltage
-+ * @apm_low_supply: APM supply to configure if the VDD voltage is less than
-+ * the APM threshold voltage
-+ * @base_volt: Minimum voltage in microvolts supported by the VDD
-+ * supply managed by this CPR controller
-+ * @corner_switch_delay_time: The delay time in nanoseconds used by the CPR
-+ * controller to wait for voltage settling before
-+ * acknowledging the OSM block after corner changes
-+ * @cpr_clock_rate: CPR reference clock frequency in Hz.
-+ * @sensor_time: The time in nanoseconds that each sensor takes to
-+ * perform a measurement.
-+ * @loop_time: The time in nanoseconds between consecutive CPR
-+ * measurements.
-+ * @up_down_delay_time: The time to delay in nanoseconds between consecutive CPR
-+ * measurements when the last measurement recommended
-+ * increasing or decreasing the vdd-supply voltage.
-+ * (platform specific)
-+ * @idle_clocks: Number of CPR reference clock ticks that the CPR
-+ * controller waits in transitional states.
-+ * @step_quot_init_min: The default minimum CPR step quotient value. The step
-+ * quotient is the number of additional ring oscillator
-+ * ticks observed when increasing one step in vdd-supply
-+ * output voltage.
-+ * @step_quot_init_max: The default maximum CPR step quotient value.
-+ * @step_volt: Step size in microvolts between available set points
-+ * of the VDD supply
-+ * @down_error_step_limit: CPR4 hardware closed-loop down error step limit which
-+ * defines the maximum number of VDD supply regulator steps
-+ * that the voltage may be reduced as the result of a
-+ * single CPR measurement.
-+ * @up_error_step_limit: CPR4 hardware closed-loop up error step limit which
-+ * defines the maximum number of VDD supply regulator steps
-+ * that the voltage may be increased as the result of a
-+ * single CPR measurement.
-+ * @count_mode: CPR controller count mode
-+ * @count_repeat: Number of times to perform consecutive sensor
-+ * measurements when using all-at-once count modes.
-+ * @proc_clock_throttle: Defines the processor clock frequency throttling
-+ * register value to use. This can be used to reduce the
-+ * clock frequency when a power domain exits a low power
-+ * mode until CPR settles at a new voltage.
-+ * (platform specific)
-+ * @cpr_allowed_hw: Boolean which indicates if closed-loop CPR operation is
-+ * permitted for a given chip based upon hardware fuse
-+ * values
-+ * @cpr_allowed_sw: Boolean which indicates if closed-loop CPR operation is
-+ * permitted based upon software policies
-+ * @supports_hw_closed_loop: Boolean which indicates if this CPR3/4 controller
-+ * physically supports hardware closed-loop CPR operation
-+ * @use_hw_closed_loop: Boolean which indicates that this controller will be
-+ * using hardware closed-loop operation in place of
-+ * software closed-loop operation.
-+ * @ctrl_type: CPR controller type
-+ * @saw_use_unit_mV: Boolean which indicates the unit used in SAW PVC
-+ * interface is mV.
-+ * @aggr_corner: CPR corner containing the most recently aggregated
-+ * voltage configurations which are being used currently
-+ * @cpr_enabled: Boolean which indicates that the CPR controller is
-+ * enabled and operating in closed-loop mode. CPR clocks
-+ * have been prepared and enabled whenever this flag is
-+ * true.
-+ * @last_corner_was_closed_loop: Boolean indicating if the last known corners
-+ * were updated during closed loop operation.
-+ * @cpr_suspended: Boolean which indicates that CPR has been temporarily
-+ * disabled while enterring system suspend.
-+ * @debugfs: Pointer to the debugfs directory of this CPR3 controller
-+ * @aging_ref_volt: Reference voltage in microvolts to configure when
-+ * performing CPR aging measurements.
-+ * @aging_vdd_mode: vdd-supply regulator mode to configure before performing
-+ * a CPR aging measurement. It should be one of
-+ * REGULATOR_MODE_*.
-+ * @aging_complete_vdd_mode: vdd-supply regulator mode to configure after
-+ * performing a CPR aging measurement. It should be one of
-+ * REGULATOR_MODE_*.
-+ * @aging_ref_adjust_volt: The reference aging voltage margin in microvolts that
-+ * should be added to the target quotients of the
-+ * regulators managed by this controller after derating.
-+ * @aging_required: Flag which indicates that a CPR aging measurement still
-+ * needs to be performed for this CPR3 controller.
-+ * @aging_succeeded: Flag which indicates that a CPR aging measurement has
-+ * completed successfully.
-+ * @aging_failed: Flag which indicates that a CPR aging measurement has
-+ * failed to complete successfully.
-+ * @aging_sensor: Array of CPR3 aging sensors which are used to perform
-+ * aging measurements at a runtime.
-+ * @aging_sensor_count: Number of elements in the aging_sensor array
-+ * @aging_possible_mask: Optional bitmask used to mask off the
-+ * aging_possible_reg register.
-+ * @aging_possible_val: Optional value that the masked aging_possible_reg
-+ * register must have in order for a CPR aging measurement
-+ * to be possible.
-+ * @step_quot_fixed: Fixed step quotient value used for target quotient
-+ * adjustment if use_dynamic_step_quot is not set.
-+ * This parameter is only relevant for CPR4 controllers
-+ * when using the per-online-core or per-temperature
-+ * adjustments.
-+ * @initial_temp_band: Temperature band used for calculation of base-line
-+ * target quotients (fused).
-+ * @use_dynamic_step_quot: Boolean value which indicates that margin adjustment
-+ * of target quotient will be based on the step quotient
-+ * calculated dynamically in hardware for each RO.
-+ * @allow_core_count_adj: Core count adjustments are allowed for this controller
-+ * @allow_temp_adj: Temperature based adjustments are allowed for
-+ * this controller
-+ * @allow_boost: Voltage boost allowed for this controller.
-+ * @temp_band_count: Number of temperature bands used for temperature based
-+ * adjustment logic
-+ * @temp_points: Array of temperature points in decidegrees Celsius used
-+ * to specify the ranges for selected temperature bands.
-+ * The array must have (temp_band_count - 1) elements
-+ * allocated.
-+ * @temp_sensor_id_start: Start ID of temperature sensors used for temperature
-+ * based adjustments.
-+ * @temp_sensor_id_end: End ID of temperature sensors used for temperature
-+ * based adjustments.
-+ * @voltage_settling_time: The time in nanoseconds that it takes for the
-+ * VDD supply voltage to settle after being increased or
-+ * decreased by step_volt microvolts which is used when
-+ * SDELTA voltage margin adjustments are applied.
-+ * @cpr_global_setting: Global setting for this CPR controller
-+ * @panic_regs_info: Array of panic registers information which provides the
-+ * list of registers to dump when the device crashes.
-+ * @panic_notifier: Notifier block registered to global panic notifier list.
-+ *
-+ * This structure contains both configuration and runtime state data. The
-+ * elements cpr_allowed_sw, use_hw_closed_loop, aggr_corner, cpr_enabled,
-+ * last_corner_was_closed_loop, cpr_suspended, aging_ref_adjust_volt,
-+ * aging_required, aging_succeeded, and aging_failed are state variables.
-+ *
-+ * The apm* elements do not need to be initialized if the VDD supply managed by
-+ * the CPR3 controller does not utilize an APM.
-+ *
-+ * The elements step_quot_fixed, initial_temp_band, allow_core_count_adj,
-+ * allow_temp_adj and temp* need to be initialized for CPR4 controllers which
-+ * are using per-online-core or per-temperature adjustments.
-+ */
-+struct cpr3_controller {
-+ struct device *dev;
-+ const char *name;
-+ int ctrl_id;
-+ void __iomem *cpr_ctrl_base;
-+ void __iomem *fuse_base;
-+ void __iomem *aging_possible_reg;
-+ struct list_head list;
-+ struct cpr3_thread *thread;
-+ int thread_count;
-+ u8 *sensor_owner;
-+ int sensor_count;
-+ int soc_revision;
-+ struct mutex lock;
-+ struct regulator *vdd_regulator;
-+ struct regulator *system_regulator;
-+ struct regulator *mem_acc_regulator;
-+ struct regulator *vdd_limit_regulator;
-+ int system_supply_max_volt;
-+ int mem_acc_threshold_volt;
-+ int mem_acc_corner_map[CPR3_MEM_ACC_CORNERS];
-+ int mem_acc_crossover_volt;
-+ struct clk *core_clk;
-+ struct clk *iface_clk;
-+ struct clk *bus_clk;
-+ int irq;
-+ struct cpumask irq_affinity_mask;
-+ struct notifier_block cpu_hotplug_notifier;
-+ int ceiling_irq;
-+ struct msm_apm_ctrl_dev *apm;
-+ int apm_threshold_volt;
-+ int apm_crossover_volt;
-+ int apm_adj_volt;
-+ enum msm_apm_supply apm_high_supply;
-+ enum msm_apm_supply apm_low_supply;
-+ int base_volt;
-+ u32 corner_switch_delay_time;
-+ u32 cpr_clock_rate;
-+ u32 sensor_time;
-+ u32 loop_time;
-+ u32 up_down_delay_time;
-+ u32 idle_clocks;
-+ u32 step_quot_init_min;
-+ u32 step_quot_init_max;
-+ int step_volt;
-+ u32 down_error_step_limit;
-+ u32 up_error_step_limit;
-+ enum cpr3_count_mode count_mode;
-+ u32 count_repeat;
-+ u32 proc_clock_throttle;
-+ bool cpr_allowed_hw;
-+ bool cpr_allowed_sw;
-+ bool supports_hw_closed_loop;
-+ bool use_hw_closed_loop;
-+ enum cpr_controller_type ctrl_type;
-+ bool saw_use_unit_mV;
-+ struct cpr3_corner aggr_corner;
-+ bool cpr_enabled;
-+ bool last_corner_was_closed_loop;
-+ bool cpr_suspended;
-+ struct dentry *debugfs;
-+
-+ int aging_ref_volt;
-+ unsigned int aging_vdd_mode;
-+ unsigned int aging_complete_vdd_mode;
-+ int aging_ref_adjust_volt;
-+ bool aging_required;
-+ bool aging_succeeded;
-+ bool aging_failed;
-+ struct cpr3_aging_sensor_info *aging_sensor;
-+ int aging_sensor_count;
-+ u32 cur_sensor_state;
-+ u32 aging_possible_mask;
-+ u32 aging_possible_val;
-+
-+ u32 step_quot_fixed;
-+ u32 initial_temp_band;
-+ bool use_dynamic_step_quot;
-+ bool allow_core_count_adj;
-+ bool allow_temp_adj;
-+ bool allow_boost;
-+ int temp_band_count;
-+ int *temp_points;
-+ u32 temp_sensor_id_start;
-+ u32 temp_sensor_id_end;
-+ u32 voltage_settling_time;
-+ enum cpr_setting cpr_global_setting;
-+ struct cpr3_panic_regs_info *panic_regs_info;
-+ struct notifier_block panic_notifier;
-+};
-+
-+/* Used for rounding voltages to the closest physically available set point. */
-+#define CPR3_ROUND(n, d) (DIV_ROUND_UP(n, d) * (d))
-+
-+#define cpr3_err(cpr3_thread, message, ...) \
-+ pr_err("%s: " message, (cpr3_thread)->name, ##__VA_ARGS__)
-+#define cpr3_info(cpr3_thread, message, ...) \
-+ pr_info("%s: " message, (cpr3_thread)->name, ##__VA_ARGS__)
-+#define cpr3_debug(cpr3_thread, message, ...) \
-+ pr_debug("%s: " message, (cpr3_thread)->name, ##__VA_ARGS__)
-+
-+/*
-+ * Offset subtracted from voltage corner values passed in from the regulator
-+ * framework in order to get internal voltage corner values. This is needed
-+ * since the regulator framework treats 0 as an error value at regulator
-+ * registration time.
-+ */
-+#define CPR3_CORNER_OFFSET 1
-+
-+#ifdef CONFIG_REGULATOR_CPR3
-+
-+int cpr3_regulator_register(struct platform_device *pdev,
-+ struct cpr3_controller *ctrl);
-+int cpr3_open_loop_regulator_register(struct platform_device *pdev,
-+ struct cpr3_controller *ctrl);
-+int cpr3_regulator_unregister(struct cpr3_controller *ctrl);
-+int cpr3_open_loop_regulator_unregister(struct cpr3_controller *ctrl);
-+int cpr3_regulator_suspend(struct cpr3_controller *ctrl);
-+int cpr3_regulator_resume(struct cpr3_controller *ctrl);
-+
-+int cpr3_allocate_threads(struct cpr3_controller *ctrl, u32 min_thread_id,
-+ u32 max_thread_id);
-+int cpr3_map_fuse_base(struct cpr3_controller *ctrl,
-+ struct platform_device *pdev);
-+int cpr3_read_tcsr_setting(struct cpr3_controller *ctrl,
-+ struct platform_device *pdev, u8 start, u8 end);
-+int cpr3_read_fuse_param(void __iomem *fuse_base_addr,
-+ const struct cpr3_fuse_param *param, u64 *param_value);
-+int cpr3_convert_open_loop_voltage_fuse(int ref_volt, int step_volt, u32 fuse,
-+ int fuse_len);
-+u64 cpr3_interpolate(u64 x1, u64 y1, u64 x2, u64 y2, u64 x);
-+int cpr3_parse_array_property(struct cpr3_regulator *vreg,
-+ const char *prop_name, int tuple_size, u32 *out);
-+int cpr3_parse_corner_array_property(struct cpr3_regulator *vreg,
-+ const char *prop_name, int tuple_size, u32 *out);
-+int cpr3_parse_corner_band_array_property(struct cpr3_regulator *vreg,
-+ const char *prop_name, int tuple_size, u32 *out);
-+int cpr3_parse_common_corner_data(struct cpr3_regulator *vreg);
-+int cpr3_parse_thread_u32(struct cpr3_thread *thread, const char *propname,
-+ u32 *out_value, u32 value_min, u32 value_max);
-+int cpr3_parse_ctrl_u32(struct cpr3_controller *ctrl, const char *propname,
-+ u32 *out_value, u32 value_min, u32 value_max);
-+int cpr3_parse_common_thread_data(struct cpr3_thread *thread);
-+int cpr3_parse_common_ctrl_data(struct cpr3_controller *ctrl);
-+int cpr3_parse_open_loop_common_ctrl_data(struct cpr3_controller *ctrl);
-+int cpr3_limit_open_loop_voltages(struct cpr3_regulator *vreg);
-+void cpr3_open_loop_voltage_as_ceiling(struct cpr3_regulator *vreg);
-+int cpr3_limit_floor_voltages(struct cpr3_regulator *vreg);
-+void cpr3_print_quots(struct cpr3_regulator *vreg);
-+int cpr3_determine_part_type(struct cpr3_regulator *vreg, int fuse_volt);
-+int cpr3_determine_temp_base_open_loop_correction(struct cpr3_regulator *vreg,
-+ int *fuse_volt);
-+int cpr3_adjust_fused_open_loop_voltages(struct cpr3_regulator *vreg,
-+ int *fuse_volt);
-+int cpr3_adjust_open_loop_voltages(struct cpr3_regulator *vreg);
-+int cpr3_quot_adjustment(int ro_scale, int volt_adjust);
-+int cpr3_voltage_adjustment(int ro_scale, int quot_adjust);
-+int cpr3_parse_closed_loop_voltage_adjustments(struct cpr3_regulator *vreg,
-+ u64 *ro_sel, int *volt_adjust,
-+ int *volt_adjust_fuse, int *ro_scale);
-+int cpr4_parse_core_count_temp_voltage_adj(struct cpr3_regulator *vreg,
-+ bool use_corner_band);
-+int cpr3_apm_init(struct cpr3_controller *ctrl);
-+int cpr3_mem_acc_init(struct cpr3_regulator *vreg);
-+void cprh_adjust_voltages_for_apm(struct cpr3_regulator *vreg);
-+void cprh_adjust_voltages_for_mem_acc(struct cpr3_regulator *vreg);
-+int cpr3_adjust_target_quotients(struct cpr3_regulator *vreg,
-+ int *fuse_volt_adjust);
-+int cpr3_handle_temp_open_loop_adjustment(struct cpr3_controller *ctrl,
-+ bool is_cold);
-+int cpr3_get_cold_temp_threshold(struct cpr3_regulator *vreg, int *cold_temp);
-+bool cpr3_can_adjust_cold_temp(struct cpr3_regulator *vreg);
-+
-+#else
-+
-+static inline int cpr3_regulator_register(struct platform_device *pdev,
-+ struct cpr3_controller *ctrl)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int
-+cpr3_open_loop_regulator_register(struct platform_device *pdev,
-+ struct cpr3_controller *ctrl);
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int cpr3_regulator_unregister(struct cpr3_controller *ctrl)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int
-+cpr3_open_loop_regulator_unregister(struct cpr3_controller *ctrl)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int cpr3_regulator_suspend(struct cpr3_controller *ctrl)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int cpr3_regulator_resume(struct cpr3_controller *ctrl)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int cpr3_get_thread_name(struct cpr3_thread *thread,
-+ struct device_node *thread_node)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_allocate_threads(struct cpr3_controller *ctrl,
-+ u32 min_thread_id, u32 max_thread_id)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_map_fuse_base(struct cpr3_controller *ctrl,
-+ struct platform_device *pdev)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int cpr3_read_tcsr_setting(struct cpr3_controller *ctrl,
-+ struct platform_device *pdev, u8 start, u8 end)
-+{
-+ return 0;
-+}
-+
-+static inline int cpr3_read_fuse_param(void __iomem *fuse_base_addr,
-+ const struct cpr3_fuse_param *param, u64 *param_value)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_convert_open_loop_voltage_fuse(int ref_volt,
-+ int step_volt, u32 fuse, int fuse_len)
-+{
-+ return -EPERM;
-+}
-+
-+static inline u64 cpr3_interpolate(u64 x1, u64 y1, u64 x2, u64 y2, u64 x)
-+{
-+ return 0;
-+}
-+
-+static inline int cpr3_parse_array_property(struct cpr3_regulator *vreg,
-+ const char *prop_name, int tuple_size, u32 *out)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_parse_corner_array_property(struct cpr3_regulator *vreg,
-+ const char *prop_name, int tuple_size, u32 *out)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_parse_corner_band_array_property(
-+ struct cpr3_regulator *vreg, const char *prop_name,
-+ int tuple_size, u32 *out)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_parse_common_corner_data(struct cpr3_regulator *vreg)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_parse_thread_u32(struct cpr3_thread *thread,
-+ const char *propname, u32 *out_value, u32 value_min,
-+ u32 value_max)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_parse_ctrl_u32(struct cpr3_controller *ctrl,
-+ const char *propname, u32 *out_value, u32 value_min,
-+ u32 value_max)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_parse_common_thread_data(struct cpr3_thread *thread)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_parse_common_ctrl_data(struct cpr3_controller *ctrl)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int
-+cpr3_parse_open_loop_common_ctrl_data(struct cpr3_controller *ctrl)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_limit_open_loop_voltages(struct cpr3_regulator *vreg)
-+{
-+ return -EPERM;
-+}
-+
-+static inline void cpr3_open_loop_voltage_as_ceiling(
-+ struct cpr3_regulator *vreg)
-+{
-+ return;
-+}
-+
-+static inline int cpr3_limit_floor_voltages(struct cpr3_regulator *vreg)
-+{
-+ return -EPERM;
-+}
-+
-+static inline void cpr3_print_quots(struct cpr3_regulator *vreg)
-+{
-+ return;
-+}
-+
-+static inline int
-+cpr3_determine_part_type(struct cpr3_regulator *vreg, int fuse_volt)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int
-+cpr3_determine_temp_base_open_loop_correction(struct cpr3_regulator *vreg,
-+ int *fuse_volt)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_adjust_fused_open_loop_voltages(
-+ struct cpr3_regulator *vreg, int *fuse_volt)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_adjust_open_loop_voltages(struct cpr3_regulator *vreg)
-+{
-+ return -EPERM;
-+}
-+
-+static inline int cpr3_quot_adjustment(int ro_scale, int volt_adjust)
-+{
-+ return 0;
-+}
-+
-+static inline int cpr3_voltage_adjustment(int ro_scale, int quot_adjust)
-+{
-+ return 0;
-+}
-+
-+static inline int cpr3_parse_closed_loop_voltage_adjustments(
-+ struct cpr3_regulator *vreg, u64 *ro_sel,
-+ int *volt_adjust, int *volt_adjust_fuse, int *ro_scale)
-+{
-+ return 0;
-+}
-+
-+static inline int cpr4_parse_core_count_temp_voltage_adj(
-+ struct cpr3_regulator *vreg, bool use_corner_band)
-+{
-+ return 0;
-+}
-+
-+static inline int cpr3_apm_init(struct cpr3_controller *ctrl)
-+{
-+ return 0;
-+}
-+
-+static inline int cpr3_mem_acc_init(struct cpr3_regulator *vreg)
-+{
-+ return 0;
-+}
-+
-+static inline void cprh_adjust_voltages_for_apm(struct cpr3_regulator *vreg)
-+{
-+}
-+
-+static inline void cprh_adjust_voltages_for_mem_acc(struct cpr3_regulator *vreg)
-+{
-+}
-+
-+static inline int cpr3_adjust_target_quotients(struct cpr3_regulator *vreg,
-+ int *fuse_volt_adjust)
-+{
-+ return 0;
-+}
-+
-+static inline int
-+cpr3_handle_temp_open_loop_adjustment(struct cpr3_controller *ctrl,
-+ bool is_cold)
-+{
-+ return 0;
-+}
-+
-+static inline bool
-+cpr3_can_adjust_cold_temp(struct cpr3_regulator *vreg)
-+{
-+ return false;
-+}
-+
-+static inline int
-+cpr3_get_cold_temp_threshold(struct cpr3_regulator *vreg, int *cold_temp)
-+{
-+ return 0;
-+}
-+#endif /* CONFIG_REGULATOR_CPR3 */
-+
-+#endif /* __REGULATOR_CPR_REGULATOR_H__ */
---- /dev/null
-+++ b/drivers/regulator/cpr3-util.c
-@@ -0,0 +1,2750 @@
-+/*
-+ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+/*
-+ * This file contains utility functions to be used by platform specific CPR3
-+ * regulator drivers.
-+ */
-+
-+#define pr_fmt(fmt) "%s: " fmt, __func__
-+
-+#include <linux/cpumask.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+
-+#include <soc/qcom/socinfo.h>
-+
-+#include "cpr3-regulator.h"
-+
-+#define BYTES_PER_FUSE_ROW 8
-+#define MAX_FUSE_ROW_BIT 63
-+
-+#define CPR3_CONSECUTIVE_UP_DOWN_MIN 0
-+#define CPR3_CONSECUTIVE_UP_DOWN_MAX 15
-+#define CPR3_UP_DOWN_THRESHOLD_MIN 0
-+#define CPR3_UP_DOWN_THRESHOLD_MAX 31
-+#define CPR3_STEP_QUOT_MIN 0
-+#define CPR3_STEP_QUOT_MAX 63
-+#define CPR3_IDLE_CLOCKS_MIN 0
-+#define CPR3_IDLE_CLOCKS_MAX 31
-+
-+/* This constant has units of uV/mV so 1000 corresponds to 100%. */
-+#define CPR3_AGING_DERATE_UNITY 1000
-+
-+/**
-+ * cpr3_allocate_regulators() - allocate and initialize CPR3 regulators for a
-+ * given thread based upon device tree data
-+ * @thread: Pointer to the CPR3 thread
-+ *
-+ * This function allocates the thread->vreg array based upon the number of
-+ * device tree regulator subnodes. It also initializes generic elements of each
-+ * regulator struct such as name, of_node, and thread.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_allocate_regulators(struct cpr3_thread *thread)
-+{
-+ struct device_node *node;
-+ int i, rc;
-+
-+ thread->vreg_count = 0;
-+
-+ for_each_available_child_of_node(thread->of_node, node) {
-+ thread->vreg_count++;
-+ }
-+
-+ thread->vreg = devm_kcalloc(thread->ctrl->dev, thread->vreg_count,
-+ sizeof(*thread->vreg), GFP_KERNEL);
-+ if (!thread->vreg)
-+ return -ENOMEM;
-+
-+ i = 0;
-+ for_each_available_child_of_node(thread->of_node, node) {
-+ thread->vreg[i].of_node = node;
-+ thread->vreg[i].thread = thread;
-+
-+ rc = of_property_read_string(node, "regulator-name",
-+ &thread->vreg[i].name);
-+ if (rc) {
-+ dev_err(thread->ctrl->dev, "could not find regulator name, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ i++;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_allocate_threads() - allocate and initialize CPR3 threads for a given
-+ * controller based upon device tree data
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @min_thread_id: Minimum allowed hardware thread ID for this controller
-+ * @max_thread_id: Maximum allowed hardware thread ID for this controller
-+ *
-+ * This function allocates the ctrl->thread array based upon the number of
-+ * device tree thread subnodes. It also initializes generic elements of each
-+ * thread struct such as thread_id, of_node, ctrl, and vreg array.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_allocate_threads(struct cpr3_controller *ctrl, u32 min_thread_id,
-+ u32 max_thread_id)
-+{
-+ struct device *dev = ctrl->dev;
-+ struct device_node *thread_node;
-+ int i, j, rc;
-+
-+ ctrl->thread_count = 0;
-+
-+ for_each_available_child_of_node(dev->of_node, thread_node) {
-+ ctrl->thread_count++;
-+ }
-+
-+ ctrl->thread = devm_kcalloc(dev, ctrl->thread_count,
-+ sizeof(*ctrl->thread), GFP_KERNEL);
-+ if (!ctrl->thread)
-+ return -ENOMEM;
-+
-+ i = 0;
-+ for_each_available_child_of_node(dev->of_node, thread_node) {
-+ ctrl->thread[i].of_node = thread_node;
-+ ctrl->thread[i].ctrl = ctrl;
-+
-+ rc = of_property_read_u32(thread_node, "qcom,cpr-thread-id",
-+ &ctrl->thread[i].thread_id);
-+ if (rc) {
-+ dev_err(dev, "could not read DT property qcom,cpr-thread-id, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ if (ctrl->thread[i].thread_id < min_thread_id ||
-+ ctrl->thread[i].thread_id > max_thread_id) {
-+ dev_err(dev, "invalid thread id = %u; not within [%u, %u]\n",
-+ ctrl->thread[i].thread_id, min_thread_id,
-+ max_thread_id);
-+ return -EINVAL;
-+ }
-+
-+ /* Verify that the thread ID is unique for all child nodes. */
-+ for (j = 0; j < i; j++) {
-+ if (ctrl->thread[j].thread_id
-+ == ctrl->thread[i].thread_id) {
-+ dev_err(dev, "duplicate thread id = %u found\n",
-+ ctrl->thread[i].thread_id);
-+ return -EINVAL;
-+ }
-+ }
-+
-+ rc = cpr3_allocate_regulators(&ctrl->thread[i]);
-+ if (rc)
-+ return rc;
-+
-+ i++;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_map_fuse_base() - ioremap the base address of the fuse region
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @pdev: Platform device pointer for the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_map_fuse_base(struct cpr3_controller *ctrl,
-+ struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fuse_base");
-+ if (!res || !res->start) {
-+ dev_err(&pdev->dev, "fuse base address is missing\n");
-+ return -ENXIO;
-+ }
-+
-+ ctrl->fuse_base = devm_ioremap(&pdev->dev, res->start,
-+ resource_size(res));
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_read_tcsr_setting - reads the CPR setting bits from TCSR register
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @pdev: Platform device pointer for the CPR3 controller
-+ * @start: start bit in TCSR register
-+ * @end: end bit in TCSR register
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_read_tcsr_setting(struct cpr3_controller *ctrl,
-+ struct platform_device *pdev, u8 start, u8 end)
-+{
-+ struct resource *res;
-+ void __iomem *tcsr_reg;
-+ u32 val;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "cpr_tcsr_reg");
-+ if (!res || !res->start)
-+ return 0;
-+
-+ tcsr_reg = ioremap(res->start, resource_size(res));
-+ if (!tcsr_reg) {
-+ dev_err(&pdev->dev, "tcsr ioremap failed\n");
-+ return 0;
-+ }
-+
-+ val = readl_relaxed(tcsr_reg);
-+ val &= GENMASK(end, start);
-+ val >>= start;
-+
-+ switch (val) {
-+ case 1:
-+ ctrl->cpr_global_setting = CPR_DISABLED;
-+ break;
-+ case 2:
-+ ctrl->cpr_global_setting = CPR_OPEN_LOOP_EN;
-+ break;
-+ case 3:
-+ ctrl->cpr_global_setting = CPR_CLOSED_LOOP_EN;
-+ break;
-+ default:
-+ ctrl->cpr_global_setting = CPR_DEFAULT;
-+ }
-+
-+ iounmap(tcsr_reg);
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_read_fuse_param() - reads a CPR3 fuse parameter out of eFuses
-+ * @fuse_base_addr: Virtual memory address of the eFuse base address
-+ * @param: Null terminated array of fuse param segments to read
-+ * from
-+ * @param_value: Output with value read from the eFuses
-+ *
-+ * This function reads from each of the parameter segments listed in the param
-+ * array and concatenates their values together. Reading stops when an element
-+ * is reached which has all 0 struct values. The total number of bits specified
-+ * for the fuse parameter across all segments must be less than or equal to 64.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_read_fuse_param(void __iomem *fuse_base_addr,
-+ const struct cpr3_fuse_param *param, u64 *param_value)
-+{
-+ u64 fuse_val, val;
-+ int bits;
-+ int bits_total = 0;
-+
-+ *param_value = 0;
-+
-+ while (param->row || param->bit_start || param->bit_end) {
-+ if (param->bit_start > param->bit_end
-+ || param->bit_end > MAX_FUSE_ROW_BIT) {
-+ pr_err("Invalid fuse parameter segment: row=%u, start=%u, end=%u\n",
-+ param->row, param->bit_start, param->bit_end);
-+ return -EINVAL;
-+ }
-+
-+ bits = param->bit_end - param->bit_start + 1;
-+ if (bits_total + bits > 64) {
-+ pr_err("Invalid fuse parameter segments; total bits = %d\n",
-+ bits_total + bits);
-+ return -EINVAL;
-+ }
-+
-+ fuse_val = readq_relaxed(fuse_base_addr
-+ + param->row * BYTES_PER_FUSE_ROW);
-+ val = (fuse_val >> param->bit_start) & ((1ULL << bits) - 1);
-+ *param_value |= val << bits_total;
-+ bits_total += bits;
-+
-+ param++;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_convert_open_loop_voltage_fuse() - converts an open loop voltage fuse
-+ * value into an absolute voltage with units of microvolts
-+ * @ref_volt: Reference voltage in microvolts
-+ * @step_volt: The step size in microvolts of the fuse LSB
-+ * @fuse: Open loop voltage fuse value
-+ * @fuse_len: The bit length of the fuse value
-+ *
-+ * The MSB of the fuse parameter corresponds to a sign bit. If it is set, then
-+ * the lower bits correspond to the number of steps to go down from the
-+ * reference voltage. If it is not set, then the lower bits correspond to the
-+ * number of steps to go up from the reference voltage.
-+ */
-+int cpr3_convert_open_loop_voltage_fuse(int ref_volt, int step_volt, u32 fuse,
-+ int fuse_len)
-+{
-+ int sign, steps;
-+
-+ sign = (fuse & (1 << (fuse_len - 1))) ? -1 : 1;
-+ steps = fuse & ((1 << (fuse_len - 1)) - 1);
-+
-+ return ref_volt + sign * steps * step_volt;
-+}
-+
-+/**
-+ * cpr3_interpolate() - performs linear interpolation
-+ * @x1 Lower known x value
-+ * @y1 Lower known y value
-+ * @x2 Upper known x value
-+ * @y2 Upper known y value
-+ * @x Intermediate x value
-+ *
-+ * Returns y where (x, y) falls on the line between (x1, y1) and (x2, y2).
-+ * It is required that x1 < x2, y1 <= y2, and x1 <= x <= x2. If these
-+ * conditions are not met, then y2 will be returned.
-+ */
-+u64 cpr3_interpolate(u64 x1, u64 y1, u64 x2, u64 y2, u64 x)
-+{
-+ u64 temp;
-+
-+ if (x1 >= x2 || y1 > y2 || x1 > x || x > x2)
-+ return y2;
-+
-+ temp = (x2 - x) * (y2 - y1);
-+ do_div(temp, (u32)(x2 - x1));
-+
-+ return y2 - temp;
-+}
-+
-+/**
-+ * cpr3_parse_array_property() - fill an array from a portion of the values
-+ * specified for a device tree property
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @prop_name: The name of the device tree property to read from
-+ * @tuple_size: The number of elements in each tuple
-+ * @out: Output data array which must be of size tuple_size
-+ *
-+ * cpr3_parse_common_corner_data() must be called for vreg before this function
-+ * is called so that fuse combo and speed bin size elements are initialized.
-+ *
-+ * Three formats are supported for the device tree property:
-+ * 1. Length == tuple_size
-+ * (reading begins at index 0)
-+ * 2. Length == tuple_size * vreg->fuse_combos_supported
-+ * (reading begins at index tuple_size * vreg->fuse_combo)
-+ * 3. Length == tuple_size * vreg->speed_bins_supported
-+ * (reading begins at index tuple_size * vreg->speed_bin_fuse)
-+ *
-+ * All other property lengths are treated as errors.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_array_property(struct cpr3_regulator *vreg,
-+ const char *prop_name, int tuple_size, u32 *out)
-+{
-+ struct device_node *node = vreg->of_node;
-+ int len = 0;
-+ int i, offset, rc;
-+
-+ if (!of_find_property(node, prop_name, &len)) {
-+ cpr3_err(vreg, "property %s is missing\n", prop_name);
-+ return -EINVAL;
-+ }
-+
-+ if (len == tuple_size * sizeof(u32)) {
-+ offset = 0;
-+ } else if (len == tuple_size * vreg->fuse_combos_supported
-+ * sizeof(u32)) {
-+ offset = tuple_size * vreg->fuse_combo;
-+ } else if (vreg->speed_bins_supported > 0 &&
-+ len == tuple_size * vreg->speed_bins_supported * sizeof(u32)) {
-+ offset = tuple_size * vreg->speed_bin_fuse;
-+ } else {
-+ if (vreg->speed_bins_supported > 0)
-+ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu, %zu, or %zu\n",
-+ prop_name, len,
-+ tuple_size * sizeof(u32),
-+ tuple_size * vreg->speed_bins_supported
-+ * sizeof(u32),
-+ tuple_size * vreg->fuse_combos_supported
-+ * sizeof(u32));
-+ else
-+ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n",
-+ prop_name, len,
-+ tuple_size * sizeof(u32),
-+ tuple_size * vreg->fuse_combos_supported
-+ * sizeof(u32));
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < tuple_size; i++) {
-+ rc = of_property_read_u32_index(node, prop_name, offset + i,
-+ &out[i]);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property %s, rc=%d\n",
-+ prop_name, rc);
-+ return rc;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_parse_corner_array_property() - fill a per-corner array from a portion
-+ * of the values specified for a device tree property
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @prop_name: The name of the device tree property to read from
-+ * @tuple_size: The number of elements in each per-corner tuple
-+ * @out: Output data array which must be of size:
-+ * tuple_size * vreg->corner_count
-+ *
-+ * cpr3_parse_common_corner_data() must be called for vreg before this function
-+ * is called so that fuse combo and speed bin size elements are initialized.
-+ *
-+ * Three formats are supported for the device tree property:
-+ * 1. Length == tuple_size * vreg->corner_count
-+ * (reading begins at index 0)
-+ * 2. Length == tuple_size * vreg->fuse_combo_corner_sum
-+ * (reading begins at index tuple_size * vreg->fuse_combo_offset)
-+ * 3. Length == tuple_size * vreg->speed_bin_corner_sum
-+ * (reading begins at index tuple_size * vreg->speed_bin_offset)
-+ *
-+ * All other property lengths are treated as errors.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_corner_array_property(struct cpr3_regulator *vreg,
-+ const char *prop_name, int tuple_size, u32 *out)
-+{
-+ struct device_node *node = vreg->of_node;
-+ int len = 0;
-+ int i, offset, rc;
-+
-+ if (!of_find_property(node, prop_name, &len)) {
-+ cpr3_err(vreg, "property %s is missing\n", prop_name);
-+ return -EINVAL;
-+ }
-+
-+ if (len == tuple_size * vreg->corner_count * sizeof(u32)) {
-+ offset = 0;
-+ } else if (len == tuple_size * vreg->fuse_combo_corner_sum
-+ * sizeof(u32)) {
-+ offset = tuple_size * vreg->fuse_combo_offset;
-+ } else if (vreg->speed_bin_corner_sum > 0 &&
-+ len == tuple_size * vreg->speed_bin_corner_sum * sizeof(u32)) {
-+ offset = tuple_size * vreg->speed_bin_offset;
-+ } else {
-+ if (vreg->speed_bin_corner_sum > 0)
-+ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu, %zu, or %zu\n",
-+ prop_name, len,
-+ tuple_size * vreg->corner_count * sizeof(u32),
-+ tuple_size * vreg->speed_bin_corner_sum
-+ * sizeof(u32),
-+ tuple_size * vreg->fuse_combo_corner_sum
-+ * sizeof(u32));
-+ else
-+ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n",
-+ prop_name, len,
-+ tuple_size * vreg->corner_count * sizeof(u32),
-+ tuple_size * vreg->fuse_combo_corner_sum
-+ * sizeof(u32));
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < tuple_size * vreg->corner_count; i++) {
-+ rc = of_property_read_u32_index(node, prop_name, offset + i,
-+ &out[i]);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property %s, rc=%d\n",
-+ prop_name, rc);
-+ return rc;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_parse_corner_band_array_property() - fill a per-corner band array
-+ * from a portion of the values specified for a device tree
-+ * property
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @prop_name: The name of the device tree property to read from
-+ * @tuple_size: The number of elements in each per-corner band tuple
-+ * @out: Output data array which must be of size:
-+ * tuple_size * vreg->corner_band_count
-+ *
-+ * cpr3_parse_common_corner_data() must be called for vreg before this function
-+ * is called so that fuse combo and speed bin size elements are initialized.
-+ * In addition, corner band fuse combo and speed bin sum and offset elements
-+ * must be initialized prior to executing this function.
-+ *
-+ * Three formats are supported for the device tree property:
-+ * 1. Length == tuple_size * vreg->corner_band_count
-+ * (reading begins at index 0)
-+ * 2. Length == tuple_size * vreg->fuse_combo_corner_band_sum
-+ * (reading begins at index tuple_size *
-+ * vreg->fuse_combo_corner_band_offset)
-+ * 3. Length == tuple_size * vreg->speed_bin_corner_band_sum
-+ * (reading begins at index tuple_size *
-+ * vreg->speed_bin_corner_band_offset)
-+ *
-+ * All other property lengths are treated as errors.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_corner_band_array_property(struct cpr3_regulator *vreg,
-+ const char *prop_name, int tuple_size, u32 *out)
-+{
-+ struct device_node *node = vreg->of_node;
-+ int len = 0;
-+ int i, offset, rc;
-+
-+ if (!of_find_property(node, prop_name, &len)) {
-+ cpr3_err(vreg, "property %s is missing\n", prop_name);
-+ return -EINVAL;
-+ }
-+
-+ if (len == tuple_size * vreg->corner_band_count * sizeof(u32)) {
-+ offset = 0;
-+ } else if (len == tuple_size * vreg->fuse_combo_corner_band_sum
-+ * sizeof(u32)) {
-+ offset = tuple_size * vreg->fuse_combo_corner_band_offset;
-+ } else if (vreg->speed_bin_corner_band_sum > 0 &&
-+ len == tuple_size * vreg->speed_bin_corner_band_sum *
-+ sizeof(u32)) {
-+ offset = tuple_size * vreg->speed_bin_corner_band_offset;
-+ } else {
-+ if (vreg->speed_bin_corner_band_sum > 0)
-+ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu, %zu, or %zu\n",
-+ prop_name, len,
-+ tuple_size * vreg->corner_band_count *
-+ sizeof(u32),
-+ tuple_size * vreg->speed_bin_corner_band_sum
-+ * sizeof(u32),
-+ tuple_size * vreg->fuse_combo_corner_band_sum
-+ * sizeof(u32));
-+ else
-+ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n",
-+ prop_name, len,
-+ tuple_size * vreg->corner_band_count *
-+ sizeof(u32),
-+ tuple_size * vreg->fuse_combo_corner_band_sum
-+ * sizeof(u32));
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < tuple_size * vreg->corner_band_count; i++) {
-+ rc = of_property_read_u32_index(node, prop_name, offset + i,
-+ &out[i]);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property %s, rc=%d\n",
-+ prop_name, rc);
-+ return rc;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_parse_common_corner_data() - parse common CPR3 properties relating to
-+ * the corners supported by a CPR3 regulator from device tree
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * This function reads, validates, and utilizes the following device tree
-+ * properties: qcom,cpr-fuse-corners, qcom,cpr-fuse-combos, qcom,cpr-speed-bins,
-+ * qcom,cpr-speed-bin-corners, qcom,cpr-corners, qcom,cpr-voltage-ceiling,
-+ * qcom,cpr-voltage-floor, qcom,corner-frequencies,
-+ * and qcom,cpr-corner-fmax-map.
-+ *
-+ * It initializes these CPR3 regulator elements: corner, corner_count,
-+ * fuse_combos_supported, fuse_corner_map, and speed_bins_supported. It
-+ * initializes these elements for each corner: ceiling_volt, floor_volt,
-+ * proc_freq, and cpr_fuse_corner.
-+ *
-+ * It requires that the following CPR3 regulator elements be initialized before
-+ * being called: fuse_corner_count, fuse_combo, and speed_bin_fuse.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_common_corner_data(struct cpr3_regulator *vreg)
-+{
-+ struct device_node *node = vreg->of_node;
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ u32 max_fuse_combos, fuse_corners, aging_allowed = 0;
-+ u32 max_speed_bins = 0;
-+ u32 *combo_corners;
-+ u32 *speed_bin_corners;
-+ u32 *temp;
-+ int i, j, rc;
-+
-+ rc = of_property_read_u32(node, "qcom,cpr-fuse-corners", &fuse_corners);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property qcom,cpr-fuse-corners, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ if (vreg->fuse_corner_count != fuse_corners) {
-+ cpr3_err(vreg, "device tree config supports %d fuse corners but the hardware has %d fuse corners\n",
-+ fuse_corners, vreg->fuse_corner_count);
-+ return -EINVAL;
-+ }
-+
-+ rc = of_property_read_u32(node, "qcom,cpr-fuse-combos",
-+ &max_fuse_combos);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property qcom,cpr-fuse-combos, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ /*
-+ * Sanity check against arbitrarily large value to avoid excessive
-+ * memory allocation.
-+ */
-+ if (max_fuse_combos > 100 || max_fuse_combos == 0) {
-+ cpr3_err(vreg, "qcom,cpr-fuse-combos is invalid: %u\n",
-+ max_fuse_combos);
-+ return -EINVAL;
-+ }
-+
-+ if (vreg->fuse_combo >= max_fuse_combos) {
-+ cpr3_err(vreg, "device tree config supports fuse combos 0-%u but the hardware has combo %d\n",
-+ max_fuse_combos - 1, vreg->fuse_combo);
-+ BUG_ON(1);
-+ return -EINVAL;
-+ }
-+
-+ vreg->fuse_combos_supported = max_fuse_combos;
-+
-+ of_property_read_u32(node, "qcom,cpr-speed-bins", &max_speed_bins);
-+
-+ /*
-+ * Sanity check against arbitrarily large value to avoid excessive
-+ * memory allocation.
-+ */
-+ if (max_speed_bins > 100) {
-+ cpr3_err(vreg, "qcom,cpr-speed-bins is invalid: %u\n",
-+ max_speed_bins);
-+ return -EINVAL;
-+ }
-+
-+ if (max_speed_bins && vreg->speed_bin_fuse >= max_speed_bins) {
-+ cpr3_err(vreg, "device tree config supports speed bins 0-%u but the hardware has speed bin %d\n",
-+ max_speed_bins - 1, vreg->speed_bin_fuse);
-+ BUG();
-+ return -EINVAL;
-+ }
-+
-+ vreg->speed_bins_supported = max_speed_bins;
-+
-+ combo_corners = kcalloc(vreg->fuse_combos_supported,
-+ sizeof(*combo_corners), GFP_KERNEL);
-+ if (!combo_corners)
-+ return -ENOMEM;
-+
-+ rc = of_property_read_u32_array(node, "qcom,cpr-corners", combo_corners,
-+ vreg->fuse_combos_supported);
-+ if (rc == -EOVERFLOW) {
-+ /* Single value case */
-+ rc = of_property_read_u32(node, "qcom,cpr-corners",
-+ combo_corners);
-+ for (i = 1; i < vreg->fuse_combos_supported; i++)
-+ combo_corners[i] = combo_corners[0];
-+ }
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property qcom,cpr-corners, rc=%d\n",
-+ rc);
-+ kfree(combo_corners);
-+ return rc;
-+ }
-+
-+ vreg->fuse_combo_offset = 0;
-+ vreg->fuse_combo_corner_sum = 0;
-+ for (i = 0; i < vreg->fuse_combos_supported; i++) {
-+ vreg->fuse_combo_corner_sum += combo_corners[i];
-+ if (i < vreg->fuse_combo)
-+ vreg->fuse_combo_offset += combo_corners[i];
-+ }
-+
-+ vreg->corner_count = combo_corners[vreg->fuse_combo];
-+
-+ kfree(combo_corners);
-+
-+ vreg->speed_bin_offset = 0;
-+ vreg->speed_bin_corner_sum = 0;
-+ if (vreg->speed_bins_supported > 0) {
-+ speed_bin_corners = kcalloc(vreg->speed_bins_supported,
-+ sizeof(*speed_bin_corners), GFP_KERNEL);
-+ if (!speed_bin_corners)
-+ return -ENOMEM;
-+
-+ rc = of_property_read_u32_array(node,
-+ "qcom,cpr-speed-bin-corners", speed_bin_corners,
-+ vreg->speed_bins_supported);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property qcom,cpr-speed-bin-corners, rc=%d\n",
-+ rc);
-+ kfree(speed_bin_corners);
-+ return rc;
-+ }
-+
-+ for (i = 0; i < vreg->speed_bins_supported; i++) {
-+ vreg->speed_bin_corner_sum += speed_bin_corners[i];
-+ if (i < vreg->speed_bin_fuse)
-+ vreg->speed_bin_offset += speed_bin_corners[i];
-+ }
-+
-+ if (speed_bin_corners[vreg->speed_bin_fuse]
-+ != vreg->corner_count) {
-+ cpr3_err(vreg, "qcom,cpr-corners and qcom,cpr-speed-bin-corners conflict on number of corners: %d vs %u\n",
-+ vreg->corner_count,
-+ speed_bin_corners[vreg->speed_bin_fuse]);
-+ kfree(speed_bin_corners);
-+ return -EINVAL;
-+ }
-+
-+ kfree(speed_bin_corners);
-+ }
-+
-+ vreg->corner = devm_kcalloc(ctrl->dev, vreg->corner_count,
-+ sizeof(*vreg->corner), GFP_KERNEL);
-+ temp = kcalloc(vreg->corner_count, sizeof(*temp), GFP_KERNEL);
-+ if (!vreg->corner || !temp)
-+ return -ENOMEM;
-+
-+ rc = cpr3_parse_corner_array_property(vreg, "qcom,cpr-voltage-ceiling",
-+ 1, temp);
-+ if (rc)
-+ goto free_temp;
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ vreg->corner[i].ceiling_volt
-+ = CPR3_ROUND(temp[i], ctrl->step_volt);
-+ vreg->corner[i].abs_ceiling_volt = vreg->corner[i].ceiling_volt;
-+ }
-+
-+ rc = cpr3_parse_corner_array_property(vreg, "qcom,cpr-voltage-floor",
-+ 1, temp);
-+ if (rc)
-+ goto free_temp;
-+ for (i = 0; i < vreg->corner_count; i++)
-+ vreg->corner[i].floor_volt
-+ = CPR3_ROUND(temp[i], ctrl->step_volt);
-+
-+ /* Validate ceiling and floor values */
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ if (vreg->corner[i].floor_volt
-+ > vreg->corner[i].ceiling_volt) {
-+ cpr3_err(vreg, "CPR floor[%d]=%d > ceiling[%d]=%d uV\n",
-+ i, vreg->corner[i].floor_volt,
-+ i, vreg->corner[i].ceiling_volt);
-+ rc = -EINVAL;
-+ goto free_temp;
-+ }
-+ }
-+
-+ /* Load optional system-supply voltages */
-+ if (of_find_property(vreg->of_node, "qcom,system-voltage", NULL)) {
-+ rc = cpr3_parse_corner_array_property(vreg,
-+ "qcom,system-voltage", 1, temp);
-+ if (rc)
-+ goto free_temp;
-+ for (i = 0; i < vreg->corner_count; i++)
-+ vreg->corner[i].system_volt = temp[i];
-+ }
-+
-+ rc = cpr3_parse_corner_array_property(vreg, "qcom,corner-frequencies",
-+ 1, temp);
-+ if (rc)
-+ goto free_temp;
-+ for (i = 0; i < vreg->corner_count; i++)
-+ vreg->corner[i].proc_freq = temp[i];
-+
-+ /* Validate frequencies */
-+ for (i = 1; i < vreg->corner_count; i++) {
-+ if (vreg->corner[i].proc_freq
-+ < vreg->corner[i - 1].proc_freq) {
-+ cpr3_err(vreg, "invalid frequency: freq[%d]=%u < freq[%d]=%u\n",
-+ i, vreg->corner[i].proc_freq, i - 1,
-+ vreg->corner[i - 1].proc_freq);
-+ rc = -EINVAL;
-+ goto free_temp;
-+ }
-+ }
-+
-+ vreg->fuse_corner_map = devm_kcalloc(ctrl->dev, vreg->fuse_corner_count,
-+ sizeof(*vreg->fuse_corner_map), GFP_KERNEL);
-+ if (!vreg->fuse_corner_map) {
-+ rc = -ENOMEM;
-+ goto free_temp;
-+ }
-+
-+ rc = cpr3_parse_array_property(vreg, "qcom,cpr-corner-fmax-map",
-+ vreg->fuse_corner_count, temp);
-+ if (rc)
-+ goto free_temp;
-+ for (i = 0; i < vreg->fuse_corner_count; i++) {
-+ vreg->fuse_corner_map[i] = temp[i] - CPR3_CORNER_OFFSET;
-+ if (temp[i] < CPR3_CORNER_OFFSET
-+ || temp[i] > vreg->corner_count + CPR3_CORNER_OFFSET) {
-+ cpr3_err(vreg, "invalid corner value specified in qcom,cpr-corner-fmax-map: %u\n",
-+ temp[i]);
-+ rc = -EINVAL;
-+ goto free_temp;
-+ } else if (i > 0 && temp[i - 1] >= temp[i]) {
-+ cpr3_err(vreg, "invalid corner %u less than or equal to previous corner %u\n",
-+ temp[i], temp[i - 1]);
-+ rc = -EINVAL;
-+ goto free_temp;
-+ }
-+ }
-+ if (temp[vreg->fuse_corner_count - 1] != vreg->corner_count)
-+ cpr3_debug(vreg, "Note: highest Fmax corner %u in qcom,cpr-corner-fmax-map does not match highest supported corner %d\n",
-+ temp[vreg->fuse_corner_count - 1],
-+ vreg->corner_count);
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ for (j = 0; j < vreg->fuse_corner_count; j++) {
-+ if (i + CPR3_CORNER_OFFSET <= temp[j]) {
-+ vreg->corner[i].cpr_fuse_corner = j;
-+ break;
-+ }
-+ }
-+ if (j == vreg->fuse_corner_count) {
-+ /*
-+ * Handle the case where the highest fuse corner maps
-+ * to a corner below the highest corner.
-+ */
-+ vreg->corner[i].cpr_fuse_corner
-+ = vreg->fuse_corner_count - 1;
-+ }
-+ }
-+
-+ if (of_find_property(vreg->of_node,
-+ "qcom,allow-aging-voltage-adjustment", NULL)) {
-+ rc = cpr3_parse_array_property(vreg,
-+ "qcom,allow-aging-voltage-adjustment",
-+ 1, &aging_allowed);
-+ if (rc)
-+ goto free_temp;
-+
-+ vreg->aging_allowed = aging_allowed;
-+ }
-+
-+ if (of_find_property(vreg->of_node,
-+ "qcom,allow-aging-open-loop-voltage-adjustment", NULL)) {
-+ rc = cpr3_parse_array_property(vreg,
-+ "qcom,allow-aging-open-loop-voltage-adjustment",
-+ 1, &aging_allowed);
-+ if (rc)
-+ goto free_temp;
-+
-+ vreg->aging_allow_open_loop_adj = aging_allowed;
-+ }
-+
-+ if (vreg->aging_allowed) {
-+ if (ctrl->aging_ref_volt <= 0) {
-+ cpr3_err(ctrl, "qcom,cpr-aging-ref-voltage must be specified\n");
-+ rc = -EINVAL;
-+ goto free_temp;
-+ }
-+
-+ rc = cpr3_parse_array_property(vreg,
-+ "qcom,cpr-aging-max-voltage-adjustment",
-+ 1, &vreg->aging_max_adjust_volt);
-+ if (rc)
-+ goto free_temp;
-+
-+ rc = cpr3_parse_array_property(vreg,
-+ "qcom,cpr-aging-ref-corner", 1, &vreg->aging_corner);
-+ if (rc) {
-+ goto free_temp;
-+ } else if (vreg->aging_corner < CPR3_CORNER_OFFSET
-+ || vreg->aging_corner > vreg->corner_count - 1
-+ + CPR3_CORNER_OFFSET) {
-+ cpr3_err(vreg, "aging reference corner=%d not in range [%d, %d]\n",
-+ vreg->aging_corner, CPR3_CORNER_OFFSET,
-+ vreg->corner_count - 1 + CPR3_CORNER_OFFSET);
-+ rc = -EINVAL;
-+ goto free_temp;
-+ }
-+ vreg->aging_corner -= CPR3_CORNER_OFFSET;
-+
-+ if (of_find_property(vreg->of_node, "qcom,cpr-aging-derate",
-+ NULL)) {
-+ rc = cpr3_parse_corner_array_property(vreg,
-+ "qcom,cpr-aging-derate", 1, temp);
-+ if (rc)
-+ goto free_temp;
-+
-+ for (i = 0; i < vreg->corner_count; i++)
-+ vreg->corner[i].aging_derate = temp[i];
-+ } else {
-+ for (i = 0; i < vreg->corner_count; i++)
-+ vreg->corner[i].aging_derate
-+ = CPR3_AGING_DERATE_UNITY;
-+ }
-+ }
-+
-+free_temp:
-+ kfree(temp);
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_parse_thread_u32() - parse the specified property from the CPR3 thread's
-+ * device tree node and verify that it is within the allowed limits
-+ * @thread: Pointer to the CPR3 thread
-+ * @propname: The name of the device tree property to read
-+ * @out_value: The output pointer to fill with the value read
-+ * @value_min: The minimum allowed property value
-+ * @value_max: The maximum allowed property value
-+ *
-+ * This function prints a verbose error message if the property is missing or
-+ * has a value which is not within the specified range.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_thread_u32(struct cpr3_thread *thread, const char *propname,
-+ u32 *out_value, u32 value_min, u32 value_max)
-+{
-+ int rc;
-+
-+ rc = of_property_read_u32(thread->of_node, propname, out_value);
-+ if (rc) {
-+ cpr3_err(thread->ctrl, "thread %u error reading property %s, rc=%d\n",
-+ thread->thread_id, propname, rc);
-+ return rc;
-+ }
-+
-+ if (*out_value < value_min || *out_value > value_max) {
-+ cpr3_err(thread->ctrl, "thread %u %s=%u is invalid; allowed range: [%u, %u]\n",
-+ thread->thread_id, propname, *out_value, value_min,
-+ value_max);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_parse_ctrl_u32() - parse the specified property from the CPR3
-+ * controller's device tree node and verify that it is within the
-+ * allowed limits
-+ * @ctrl: Pointer to the CPR3 controller
-+ * @propname: The name of the device tree property to read
-+ * @out_value: The output pointer to fill with the value read
-+ * @value_min: The minimum allowed property value
-+ * @value_max: The maximum allowed property value
-+ *
-+ * This function prints a verbose error message if the property is missing or
-+ * has a value which is not within the specified range.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_ctrl_u32(struct cpr3_controller *ctrl, const char *propname,
-+ u32 *out_value, u32 value_min, u32 value_max)
-+{
-+ int rc;
-+
-+ rc = of_property_read_u32(ctrl->dev->of_node, propname, out_value);
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading property %s, rc=%d\n",
-+ propname, rc);
-+ return rc;
-+ }
-+
-+ if (*out_value < value_min || *out_value > value_max) {
-+ cpr3_err(ctrl, "%s=%u is invalid; allowed range: [%u, %u]\n",
-+ propname, *out_value, value_min, value_max);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_parse_common_thread_data() - parse common CPR3 thread properties from
-+ * device tree
-+ * @thread: Pointer to the CPR3 thread
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_common_thread_data(struct cpr3_thread *thread)
-+{
-+ int rc;
-+
-+ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-consecutive-up",
-+ &thread->consecutive_up, CPR3_CONSECUTIVE_UP_DOWN_MIN,
-+ CPR3_CONSECUTIVE_UP_DOWN_MAX);
-+ if (rc)
-+ return rc;
-+
-+ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-consecutive-down",
-+ &thread->consecutive_down, CPR3_CONSECUTIVE_UP_DOWN_MIN,
-+ CPR3_CONSECUTIVE_UP_DOWN_MAX);
-+ if (rc)
-+ return rc;
-+
-+ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-up-threshold",
-+ &thread->up_threshold, CPR3_UP_DOWN_THRESHOLD_MIN,
-+ CPR3_UP_DOWN_THRESHOLD_MAX);
-+ if (rc)
-+ return rc;
-+
-+ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-down-threshold",
-+ &thread->down_threshold, CPR3_UP_DOWN_THRESHOLD_MIN,
-+ CPR3_UP_DOWN_THRESHOLD_MAX);
-+ if (rc)
-+ return rc;
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_parse_irq_affinity() - parse CPR IRQ affinity information
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_parse_irq_affinity(struct cpr3_controller *ctrl)
-+{
-+ struct device_node *cpu_node;
-+ int i, cpu;
-+ int len = 0;
-+
-+ if (!of_find_property(ctrl->dev->of_node, "qcom,cpr-interrupt-affinity",
-+ &len)) {
-+ /* No IRQ affinity required */
-+ return 0;
-+ }
-+
-+ len /= sizeof(u32);
-+
-+ for (i = 0; i < len; i++) {
-+ cpu_node = of_parse_phandle(ctrl->dev->of_node,
-+ "qcom,cpr-interrupt-affinity", i);
-+ if (!cpu_node) {
-+ cpr3_err(ctrl, "could not find CPU node %d\n", i);
-+ return -EINVAL;
-+ }
-+
-+ for_each_possible_cpu(cpu) {
-+ if (of_get_cpu_node(cpu, NULL) == cpu_node) {
-+ cpumask_set_cpu(cpu, &ctrl->irq_affinity_mask);
-+ break;
-+ }
-+ }
-+ of_node_put(cpu_node);
-+ }
-+
-+ return 0;
-+}
-+
-+static int cpr3_panic_notifier_init(struct cpr3_controller *ctrl)
-+{
-+ struct device_node *node = ctrl->dev->of_node;
-+ struct cpr3_panic_regs_info *panic_regs_info;
-+ struct cpr3_reg_info *regs;
-+ int i, reg_count, len, rc = 0;
-+
-+ if (!of_find_property(node, "qcom,cpr-panic-reg-addr-list", &len)) {
-+ /* panic register address list not specified */
-+ return rc;
-+ }
-+
-+ reg_count = len / sizeof(u32);
-+ if (!reg_count) {
-+ cpr3_err(ctrl, "qcom,cpr-panic-reg-addr-list has invalid len = %d\n",
-+ len);
-+ return -EINVAL;
-+ }
-+
-+ if (!of_find_property(node, "qcom,cpr-panic-reg-name-list", NULL)) {
-+ cpr3_err(ctrl, "property qcom,cpr-panic-reg-name-list not specified\n");
-+ return -EINVAL;
-+ }
-+
-+ len = of_property_count_strings(node, "qcom,cpr-panic-reg-name-list");
-+ if (reg_count != len) {
-+ cpr3_err(ctrl, "qcom,cpr-panic-reg-name-list should have %d strings\n",
-+ reg_count);
-+ return -EINVAL;
-+ }
-+
-+ panic_regs_info = devm_kzalloc(ctrl->dev, sizeof(*panic_regs_info),
-+ GFP_KERNEL);
-+ if (!panic_regs_info)
-+ return -ENOMEM;
-+
-+ regs = devm_kcalloc(ctrl->dev, reg_count, sizeof(*regs), GFP_KERNEL);
-+ if (!regs)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < reg_count; i++) {
-+ rc = of_property_read_string_index(node,
-+ "qcom,cpr-panic-reg-name-list", i,
-+ &(regs[i].name));
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading property qcom,cpr-panic-reg-name-list, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = of_property_read_u32_index(node,
-+ "qcom,cpr-panic-reg-addr-list", i,
-+ &(regs[i].addr));
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading property qcom,cpr-panic-reg-addr-list, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ regs[i].virt_addr = devm_ioremap(ctrl->dev, regs[i].addr, 0x4);
-+ if (!regs[i].virt_addr) {
-+ pr_err("Unable to map panic register addr 0x%08x\n",
-+ regs[i].addr);
-+ return -EINVAL;
-+ }
-+ regs[i].value = 0xFFFFFFFF;
-+ }
-+
-+ panic_regs_info->reg_count = reg_count;
-+ panic_regs_info->regs = regs;
-+ ctrl->panic_regs_info = panic_regs_info;
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_parse_common_ctrl_data() - parse common CPR3 controller properties from
-+ * device tree
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_common_ctrl_data(struct cpr3_controller *ctrl)
-+{
-+ int rc;
-+
-+ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-sensor-time",
-+ &ctrl->sensor_time, 0, UINT_MAX);
-+ if (rc)
-+ return rc;
-+
-+ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-loop-time",
-+ &ctrl->loop_time, 0, UINT_MAX);
-+ if (rc)
-+ return rc;
-+
-+ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-idle-cycles",
-+ &ctrl->idle_clocks, CPR3_IDLE_CLOCKS_MIN,
-+ CPR3_IDLE_CLOCKS_MAX);
-+ if (rc)
-+ return rc;
-+
-+ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-step-quot-init-min",
-+ &ctrl->step_quot_init_min, CPR3_STEP_QUOT_MIN,
-+ CPR3_STEP_QUOT_MAX);
-+ if (rc)
-+ return rc;
-+
-+ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-step-quot-init-max",
-+ &ctrl->step_quot_init_max, CPR3_STEP_QUOT_MIN,
-+ CPR3_STEP_QUOT_MAX);
-+ if (rc)
-+ return rc;
-+
-+ rc = of_property_read_u32(ctrl->dev->of_node, "qcom,voltage-step",
-+ &ctrl->step_volt);
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading property qcom,voltage-step, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ if (ctrl->step_volt <= 0) {
-+ cpr3_err(ctrl, "qcom,voltage-step=%d is invalid\n",
-+ ctrl->step_volt);
-+ return -EINVAL;
-+ }
-+
-+ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-count-mode",
-+ &ctrl->count_mode, CPR3_COUNT_MODE_ALL_AT_ONCE_MIN,
-+ CPR3_COUNT_MODE_STAGGERED);
-+ if (rc)
-+ return rc;
-+
-+ /* Count repeat is optional */
-+ ctrl->count_repeat = 0;
-+ of_property_read_u32(ctrl->dev->of_node, "qcom,cpr-count-repeat",
-+ &ctrl->count_repeat);
-+
-+ ctrl->cpr_allowed_sw =
-+ of_property_read_bool(ctrl->dev->of_node, "qcom,cpr-enable") ||
-+ ctrl->cpr_global_setting == CPR_CLOSED_LOOP_EN;
-+
-+ rc = cpr3_parse_irq_affinity(ctrl);
-+ if (rc)
-+ return rc;
-+
-+ /* Aging reference voltage is optional */
-+ ctrl->aging_ref_volt = 0;
-+ of_property_read_u32(ctrl->dev->of_node, "qcom,cpr-aging-ref-voltage",
-+ &ctrl->aging_ref_volt);
-+
-+ /* Aging possible bitmask is optional */
-+ ctrl->aging_possible_mask = 0;
-+ of_property_read_u32(ctrl->dev->of_node,
-+ "qcom,cpr-aging-allowed-reg-mask",
-+ &ctrl->aging_possible_mask);
-+
-+ if (ctrl->aging_possible_mask) {
-+ /*
-+ * Aging possible register value required if bitmask is
-+ * specified
-+ */
-+ rc = cpr3_parse_ctrl_u32(ctrl,
-+ "qcom,cpr-aging-allowed-reg-value",
-+ &ctrl->aging_possible_val, 0, UINT_MAX);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ if (of_find_property(ctrl->dev->of_node, "clock-names", NULL)) {
-+ ctrl->core_clk = devm_clk_get(ctrl->dev, "core_clk");
-+ if (IS_ERR(ctrl->core_clk)) {
-+ rc = PTR_ERR(ctrl->core_clk);
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "unable request core clock, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ }
-+
-+ rc = cpr3_panic_notifier_init(ctrl);
-+ if (rc)
-+ return rc;
-+
-+ if (of_find_property(ctrl->dev->of_node, "vdd-supply", NULL)) {
-+ ctrl->vdd_regulator = devm_regulator_get(ctrl->dev, "vdd");
-+ if (IS_ERR(ctrl->vdd_regulator)) {
-+ rc = PTR_ERR(ctrl->vdd_regulator);
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "unable to request vdd regulator, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ } else {
-+ cpr3_err(ctrl, "vdd supply is not defined\n");
-+ return -ENODEV;
-+ }
-+
-+ ctrl->system_regulator = devm_regulator_get_optional(ctrl->dev,
-+ "system");
-+ if (IS_ERR(ctrl->system_regulator)) {
-+ rc = PTR_ERR(ctrl->system_regulator);
-+ if (rc != -EPROBE_DEFER) {
-+ rc = 0;
-+ ctrl->system_regulator = NULL;
-+ } else {
-+ return rc;
-+ }
-+ }
-+
-+ ctrl->mem_acc_regulator = devm_regulator_get_optional(ctrl->dev,
-+ "mem-acc");
-+ if (IS_ERR(ctrl->mem_acc_regulator)) {
-+ rc = PTR_ERR(ctrl->mem_acc_regulator);
-+ if (rc != -EPROBE_DEFER) {
-+ rc = 0;
-+ ctrl->mem_acc_regulator = NULL;
-+ } else {
-+ return rc;
-+ }
-+ }
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_parse_open_loop_common_ctrl_data() - parse common open loop CPR3
-+ * controller properties from device tree
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_open_loop_common_ctrl_data(struct cpr3_controller *ctrl)
-+{
-+ int rc;
-+
-+ rc = of_property_read_u32(ctrl->dev->of_node, "qcom,voltage-step",
-+ &ctrl->step_volt);
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading property qcom,voltage-step, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ if (ctrl->step_volt <= 0) {
-+ cpr3_err(ctrl, "qcom,voltage-step=%d is invalid\n",
-+ ctrl->step_volt);
-+ return -EINVAL;
-+ }
-+
-+ if (of_find_property(ctrl->dev->of_node, "vdd-supply", NULL)) {
-+ ctrl->vdd_regulator = devm_regulator_get(ctrl->dev, "vdd");
-+ if (IS_ERR(ctrl->vdd_regulator)) {
-+ rc = PTR_ERR(ctrl->vdd_regulator);
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "unable to request vdd regulator, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ } else {
-+ cpr3_err(ctrl, "vdd supply is not defined\n");
-+ return -ENODEV;
-+ }
-+
-+ ctrl->system_regulator = devm_regulator_get_optional(ctrl->dev,
-+ "system");
-+ if (IS_ERR(ctrl->system_regulator)) {
-+ rc = PTR_ERR(ctrl->system_regulator);
-+ if (rc != -EPROBE_DEFER) {
-+ rc = 0;
-+ ctrl->system_regulator = NULL;
-+ } else {
-+ return rc;
-+ }
-+ } else {
-+ rc = regulator_enable(ctrl->system_regulator);
-+ }
-+
-+ ctrl->mem_acc_regulator = devm_regulator_get_optional(ctrl->dev,
-+ "mem-acc");
-+ if (IS_ERR(ctrl->mem_acc_regulator)) {
-+ rc = PTR_ERR(ctrl->mem_acc_regulator);
-+ if (rc != -EPROBE_DEFER) {
-+ rc = 0;
-+ ctrl->mem_acc_regulator = NULL;
-+ } else {
-+ return rc;
-+ }
-+ }
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_limit_open_loop_voltages() - modify the open-loop voltage of each corner
-+ * so that it fits within the floor to ceiling
-+ * voltage range of the corner
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * This function clips the open-loop voltage for each corner so that it is
-+ * limited to the floor to ceiling range. It also rounds each open-loop voltage
-+ * so that it corresponds to a set point available to the underlying regulator.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_limit_open_loop_voltages(struct cpr3_regulator *vreg)
-+{
-+ int i, volt;
-+
-+ cpr3_debug(vreg, "open-loop voltages after trimming and rounding:\n");
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ volt = CPR3_ROUND(vreg->corner[i].open_loop_volt,
-+ vreg->thread->ctrl->step_volt);
-+ if (volt < vreg->corner[i].floor_volt)
-+ volt = vreg->corner[i].floor_volt;
-+ else if (volt > vreg->corner[i].ceiling_volt)
-+ volt = vreg->corner[i].ceiling_volt;
-+ vreg->corner[i].open_loop_volt = volt;
-+ cpr3_debug(vreg, "corner[%2d]: open-loop=%d uV\n", i, volt);
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_open_loop_voltage_as_ceiling() - configures the ceiling voltage for each
-+ * corner to equal the open-loop voltage if the relevant device
-+ * tree property is found for the CPR3 regulator
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * This function assumes that the the open-loop voltage for each corner has
-+ * already been rounded to the nearest allowed set point and that it falls
-+ * within the floor to ceiling range.
-+ *
-+ * Return: none
-+ */
-+void cpr3_open_loop_voltage_as_ceiling(struct cpr3_regulator *vreg)
-+{
-+ int i;
-+
-+ if (!of_property_read_bool(vreg->of_node,
-+ "qcom,cpr-scaled-open-loop-voltage-as-ceiling"))
-+ return;
-+
-+ for (i = 0; i < vreg->corner_count; i++)
-+ vreg->corner[i].ceiling_volt
-+ = vreg->corner[i].open_loop_volt;
-+}
-+
-+/**
-+ * cpr3_limit_floor_voltages() - raise the floor voltage of each corner so that
-+ * the optional maximum floor to ceiling voltage range specified in
-+ * device tree is satisfied
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * This function also ensures that the open-loop voltage for each corner falls
-+ * within the final floor to ceiling voltage range and that floor voltages
-+ * increase monotonically.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_limit_floor_voltages(struct cpr3_regulator *vreg)
-+{
-+ char *prop = "qcom,cpr-floor-to-ceiling-max-range";
-+ int i, floor_new;
-+ u32 *floor_range;
-+ int rc = 0;
-+
-+ if (!of_find_property(vreg->of_node, prop, NULL))
-+ goto enforce_monotonicity;
-+
-+ floor_range = kcalloc(vreg->corner_count, sizeof(*floor_range),
-+ GFP_KERNEL);
-+ if (!floor_range)
-+ return -ENOMEM;
-+
-+ rc = cpr3_parse_corner_array_property(vreg, prop, 1, floor_range);
-+ if (rc)
-+ goto free_floor_adjust;
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ if ((s32)floor_range[i] >= 0) {
-+ floor_new = CPR3_ROUND(vreg->corner[i].ceiling_volt
-+ - floor_range[i],
-+ vreg->thread->ctrl->step_volt);
-+
-+ vreg->corner[i].floor_volt = max(floor_new,
-+ vreg->corner[i].floor_volt);
-+ if (vreg->corner[i].open_loop_volt
-+ < vreg->corner[i].floor_volt)
-+ vreg->corner[i].open_loop_volt
-+ = vreg->corner[i].floor_volt;
-+ }
-+ }
-+
-+free_floor_adjust:
-+ kfree(floor_range);
-+
-+enforce_monotonicity:
-+ /* Ensure that floor voltages increase monotonically. */
-+ for (i = 1; i < vreg->corner_count; i++) {
-+ if (vreg->corner[i].floor_volt
-+ < vreg->corner[i - 1].floor_volt) {
-+ cpr3_debug(vreg, "corner %d floor voltage=%d uV < corner %d voltage=%d uV; overriding: corner %d voltage=%d\n",
-+ i, vreg->corner[i].floor_volt,
-+ i - 1, vreg->corner[i - 1].floor_volt,
-+ i, vreg->corner[i - 1].floor_volt);
-+ vreg->corner[i].floor_volt
-+ = vreg->corner[i - 1].floor_volt;
-+
-+ if (vreg->corner[i].open_loop_volt
-+ < vreg->corner[i].floor_volt)
-+ vreg->corner[i].open_loop_volt
-+ = vreg->corner[i].floor_volt;
-+ if (vreg->corner[i].ceiling_volt
-+ < vreg->corner[i].floor_volt)
-+ vreg->corner[i].ceiling_volt
-+ = vreg->corner[i].floor_volt;
-+ }
-+ }
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_print_quots() - print CPR target quotients into the kernel log for
-+ * debugging purposes
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: none
-+ */
-+void cpr3_print_quots(struct cpr3_regulator *vreg)
-+{
-+ int i, j, pos;
-+ size_t buflen;
-+ char *buf;
-+
-+ buflen = sizeof(*buf) * CPR3_RO_COUNT * (MAX_CHARS_PER_INT + 2);
-+ buf = kzalloc(buflen, GFP_KERNEL);
-+ if (!buf)
-+ return;
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ for (j = 0, pos = 0; j < CPR3_RO_COUNT; j++)
-+ pos += scnprintf(buf + pos, buflen - pos, " %u",
-+ vreg->corner[i].target_quot[j]);
-+ cpr3_debug(vreg, "target quots[%2d]:%s\n", i, buf);
-+ }
-+
-+ kfree(buf);
-+}
-+
-+/**
-+ * cpr3_determine_part_type() - determine the part type (SS/TT/FF).
-+ *
-+ * qcom,cpr-part-types prop tells the number of part types for which correction
-+ * voltages are different. Another prop qcom,cpr-parts-voltage will contain the
-+ * open loop fuse voltage which will be compared with this part voltage
-+ * and accordingly part type will de determined.
-+ *
-+ * if qcom,cpr-part-types has value n, then qcom,cpr-parts-voltage will be
-+ * array of n - 1 elements which will contain the voltage in increasing order.
-+ * This function compares the fused volatge with all these voltage and returns
-+ * the first index for which the fused volatge is greater.
-+ *
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @fuse_volt: fused open loop voltage which will be compared with
-+ * qcom,cpr-parts-voltage array
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_determine_part_type(struct cpr3_regulator *vreg, int fuse_volt)
-+{
-+ int i, rc, len;
-+ u32 volt;
-+ int soc_version_major;
-+ char prop_name[100];
-+ const char prop_name_def[] = "qcom,cpr-parts-voltage";
-+ const char prop_name_v2[] = "qcom,cpr-parts-voltage-v2";
-+
-+ soc_version_major = read_ipq_soc_version_major();
-+ BUG_ON(soc_version_major <= 0);
-+
-+ if (of_property_read_u32(vreg->of_node, "qcom,cpr-part-types",
-+ &vreg->part_type_supported))
-+ return 0;
-+
-+ if (soc_version_major > 1)
-+ strlcpy(prop_name, prop_name_v2, sizeof(prop_name_v2));
-+ else
-+ strlcpy(prop_name, prop_name_def, sizeof(prop_name_def));
-+
-+ if (!of_find_property(vreg->of_node, prop_name, &len)) {
-+ cpr3_err(vreg, "property %s is missing\n", prop_name);
-+ return -EINVAL;
-+ }
-+
-+ if (len != (vreg->part_type_supported - 1) * sizeof(u32)) {
-+ cpr3_err(vreg, "wrong len in qcom,cpr-parts-voltage\n");
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < vreg->part_type_supported - 1; i++) {
-+ rc = of_property_read_u32_index(vreg->of_node,
-+ prop_name, i, &volt);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property %s, rc=%d\n",
-+ prop_name, rc);
-+ return rc;
-+ }
-+
-+ if (fuse_volt < volt)
-+ break;
-+ }
-+
-+ vreg->part_type = i;
-+ return 0;
-+}
-+
-+int cpr3_determine_temp_base_open_loop_correction(struct cpr3_regulator *vreg,
-+ int *fuse_volt)
-+{
-+ int i, rc, prev_volt;
-+ int *volt_adjust;
-+ char prop_str[75];
-+ int soc_version_major = read_ipq_soc_version_major();
-+
-+ BUG_ON(soc_version_major <= 0);
-+
-+ if (vreg->part_type_supported) {
-+ if (soc_version_major > 1)
-+ snprintf(prop_str, sizeof(prop_str),
-+ "qcom,cpr-cold-temp-voltage-adjustment-v2-%d",
-+ vreg->part_type);
-+ else
-+ snprintf(prop_str, sizeof(prop_str),
-+ "qcom,cpr-cold-temp-voltage-adjustment-%d",
-+ vreg->part_type);
-+ } else {
-+ strlcpy(prop_str, "qcom,cpr-cold-temp-voltage-adjustment",
-+ sizeof(prop_str));
-+ }
-+
-+ if (!of_find_property(vreg->of_node, prop_str, NULL)) {
-+ /* No adjustment required. */
-+ cpr3_info(vreg, "No cold temperature adjustment required.\n");
-+ return 0;
-+ }
-+
-+ volt_adjust = kcalloc(vreg->fuse_corner_count, sizeof(*volt_adjust),
-+ GFP_KERNEL);
-+ if (!volt_adjust)
-+ return -ENOMEM;
-+
-+ rc = cpr3_parse_array_property(vreg, prop_str,
-+ vreg->fuse_corner_count, volt_adjust);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load cold temp voltage adjustments, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ for (i = 0; i < vreg->fuse_corner_count; i++) {
-+ if (volt_adjust[i]) {
-+ prev_volt = fuse_volt[i];
-+ fuse_volt[i] += volt_adjust[i];
-+ cpr3_debug(vreg,
-+ "adjusted fuse corner %d open-loop voltage: %d -> %d uV\n",
-+ i, prev_volt, fuse_volt[i]);
-+ }
-+ }
-+
-+done:
-+ kfree(volt_adjust);
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_can_adjust_cold_temp() - Is cold temperature adjustment available
-+ *
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * This function checks the cold temperature threshold is available
-+ *
-+ * Return: true on cold temperature threshold is available, else false
-+ */
-+bool cpr3_can_adjust_cold_temp(struct cpr3_regulator *vreg)
-+{
-+ char prop_str[75];
-+ int soc_version_major = read_ipq_soc_version_major();
-+
-+ BUG_ON(soc_version_major <= 0);
-+
-+ if (soc_version_major > 1)
-+ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold-v2",
-+ sizeof(prop_str));
-+ else
-+ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold",
-+ sizeof(prop_str));
-+
-+ if (!of_find_property(vreg->of_node, prop_str, NULL)) {
-+ /* No adjustment required. */
-+ return false;
-+ } else
-+ return true;
-+}
-+
-+/**
-+ * cpr3_get_cold_temp_threshold() - get cold temperature threshold
-+ *
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @cold_temp: cold temperature read.
-+ *
-+ * This function reads the cold temperature threshold below which
-+ * cold temperature adjustment margins will be applied.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_get_cold_temp_threshold(struct cpr3_regulator *vreg, int *cold_temp)
-+{
-+ int rc;
-+ u32 temp;
-+ char req_prop_str[75], prop_str[75];
-+ int soc_version_major = read_ipq_soc_version_major();
-+
-+ BUG_ON(soc_version_major <= 0);
-+
-+ if (vreg->part_type_supported) {
-+ if (soc_version_major > 1)
-+ snprintf(req_prop_str, sizeof(req_prop_str),
-+ "qcom,cpr-cold-temp-voltage-adjustment-v2-%d",
-+ vreg->part_type);
-+ else
-+ snprintf(req_prop_str, sizeof(req_prop_str),
-+ "qcom,cpr-cold-temp-voltage-adjustment-%d",
-+ vreg->part_type);
-+ } else {
-+ strlcpy(req_prop_str, "qcom,cpr-cold-temp-voltage-adjustment",
-+ sizeof(req_prop_str));
-+ }
-+
-+ if (soc_version_major > 1)
-+ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold-v2",
-+ sizeof(prop_str));
-+ else
-+ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold",
-+ sizeof(prop_str));
-+
-+ if (!of_find_property(vreg->of_node, req_prop_str, NULL)) {
-+ /* No adjustment required. */
-+ cpr3_info(vreg, "Cold temperature adjustment not required.\n");
-+ return 0;
-+ }
-+
-+ if (!of_find_property(vreg->of_node, prop_str, NULL)) {
-+ /* No adjustment required. */
-+ cpr3_err(vreg, "Missing %s required for %s\n",
-+ prop_str, req_prop_str);
-+ return -EINVAL;
-+ }
-+
-+ rc = of_property_read_u32(vreg->of_node, prop_str, &temp);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property %s, rc=%d\n",
-+ prop_str, rc);
-+ return rc;
-+ }
-+
-+ *cold_temp = temp;
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_adjust_fused_open_loop_voltages() - adjust the fused open-loop voltages
-+ * for each fuse corner according to device tree values
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @fuse_volt: Pointer to an array of the fused open-loop voltage
-+ * values
-+ *
-+ * Voltage values in fuse_volt are modified in place.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_adjust_fused_open_loop_voltages(struct cpr3_regulator *vreg,
-+ int *fuse_volt)
-+{
-+ int i, rc, prev_volt;
-+ int *volt_adjust;
-+ char prop_str[75];
-+ int soc_version_major = read_ipq_soc_version_major();
-+
-+ BUG_ON(soc_version_major <= 0);
-+
-+ if (vreg->part_type_supported) {
-+ if (soc_version_major > 1)
-+ snprintf(prop_str, sizeof(prop_str),
-+ "qcom,cpr-open-loop-voltage-fuse-adjustment-v2-%d",
-+ vreg->part_type);
-+ else
-+ snprintf(prop_str, sizeof(prop_str),
-+ "qcom,cpr-open-loop-voltage-fuse-adjustment-%d",
-+ vreg->part_type);
-+ } else {
-+ strlcpy(prop_str, "qcom,cpr-open-loop-voltage-fuse-adjustment",
-+ sizeof(prop_str));
-+ }
-+
-+ if (!of_find_property(vreg->of_node, prop_str, NULL)) {
-+ /* No adjustment required. */
-+ return 0;
-+ }
-+
-+ volt_adjust = kcalloc(vreg->fuse_corner_count, sizeof(*volt_adjust),
-+ GFP_KERNEL);
-+ if (!volt_adjust)
-+ return -ENOMEM;
-+
-+ rc = cpr3_parse_array_property(vreg,
-+ prop_str, vreg->fuse_corner_count, volt_adjust);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load open-loop fused voltage adjustments, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ for (i = 0; i < vreg->fuse_corner_count; i++) {
-+ if (volt_adjust[i]) {
-+ prev_volt = fuse_volt[i];
-+ fuse_volt[i] += volt_adjust[i];
-+ cpr3_debug(vreg, "adjusted fuse corner %d open-loop voltage: %d --> %d uV\n",
-+ i, prev_volt, fuse_volt[i]);
-+ }
-+ }
-+
-+done:
-+ kfree(volt_adjust);
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_adjust_open_loop_voltages() - adjust the open-loop voltages for each
-+ * corner according to device tree values
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_adjust_open_loop_voltages(struct cpr3_regulator *vreg)
-+{
-+ int i, rc, prev_volt, min_volt;
-+ int *volt_adjust, *volt_diff;
-+
-+ if (!of_find_property(vreg->of_node,
-+ "qcom,cpr-open-loop-voltage-adjustment", NULL)) {
-+ /* No adjustment required. */
-+ return 0;
-+ }
-+
-+ volt_adjust = kcalloc(vreg->corner_count, sizeof(*volt_adjust),
-+ GFP_KERNEL);
-+ volt_diff = kcalloc(vreg->corner_count, sizeof(*volt_diff), GFP_KERNEL);
-+ if (!volt_adjust || !volt_diff) {
-+ rc = -ENOMEM;
-+ goto done;
-+ }
-+
-+ rc = cpr3_parse_corner_array_property(vreg,
-+ "qcom,cpr-open-loop-voltage-adjustment", 1, volt_adjust);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load open-loop voltage adjustments, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ if (volt_adjust[i]) {
-+ prev_volt = vreg->corner[i].open_loop_volt;
-+ vreg->corner[i].open_loop_volt += volt_adjust[i];
-+ cpr3_debug(vreg, "adjusted corner %d open-loop voltage: %d --> %d uV\n",
-+ i, prev_volt, vreg->corner[i].open_loop_volt);
-+ }
-+ }
-+
-+ if (of_find_property(vreg->of_node,
-+ "qcom,cpr-open-loop-voltage-min-diff", NULL)) {
-+ rc = cpr3_parse_corner_array_property(vreg,
-+ "qcom,cpr-open-loop-voltage-min-diff", 1, volt_diff);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load minimum open-loop voltage differences, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ /*
-+ * Ensure that open-loop voltages increase monotonically with respect
-+ * to configurable minimum allowed differences.
-+ */
-+ for (i = 1; i < vreg->corner_count; i++) {
-+ min_volt = vreg->corner[i - 1].open_loop_volt + volt_diff[i];
-+ if (vreg->corner[i].open_loop_volt < min_volt) {
-+ cpr3_debug(vreg, "adjusted corner %d open-loop voltage=%d uV < corner %d voltage=%d uV + min diff=%d uV; overriding: corner %d voltage=%d\n",
-+ i, vreg->corner[i].open_loop_volt,
-+ i - 1, vreg->corner[i - 1].open_loop_volt,
-+ volt_diff[i], i, min_volt);
-+ vreg->corner[i].open_loop_volt = min_volt;
-+ }
-+ }
-+
-+done:
-+ kfree(volt_diff);
-+ kfree(volt_adjust);
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_quot_adjustment() - returns the quotient adjustment value resulting from
-+ * the specified voltage adjustment and RO scaling factor
-+ * @ro_scale: The CPR ring oscillator (RO) scaling factor with units
-+ * of QUOT/V
-+ * @volt_adjust: The amount to adjust the voltage by in units of
-+ * microvolts. This value may be positive or negative.
-+ */
-+int cpr3_quot_adjustment(int ro_scale, int volt_adjust)
-+{
-+ unsigned long long temp;
-+ int quot_adjust;
-+ int sign = 1;
-+
-+ if (ro_scale < 0) {
-+ sign = -sign;
-+ ro_scale = -ro_scale;
-+ }
-+
-+ if (volt_adjust < 0) {
-+ sign = -sign;
-+ volt_adjust = -volt_adjust;
-+ }
-+
-+ temp = (unsigned long long)ro_scale * (unsigned long long)volt_adjust;
-+ do_div(temp, 1000000);
-+
-+ quot_adjust = temp;
-+ quot_adjust *= sign;
-+
-+ return quot_adjust;
-+}
-+
-+/**
-+ * cpr3_voltage_adjustment() - returns the voltage adjustment value resulting
-+ * from the specified quotient adjustment and RO scaling factor
-+ * @ro_scale: The CPR ring oscillator (RO) scaling factor with units
-+ * of QUOT/V
-+ * @quot_adjust: The amount to adjust the quotient by in units of
-+ * QUOT. This value may be positive or negative.
-+ */
-+int cpr3_voltage_adjustment(int ro_scale, int quot_adjust)
-+{
-+ unsigned long long temp;
-+ int volt_adjust;
-+ int sign = 1;
-+
-+ if (ro_scale < 0) {
-+ sign = -sign;
-+ ro_scale = -ro_scale;
-+ }
-+
-+ if (quot_adjust < 0) {
-+ sign = -sign;
-+ quot_adjust = -quot_adjust;
-+ }
-+
-+ if (ro_scale == 0)
-+ return 0;
-+
-+ temp = (unsigned long long)quot_adjust * 1000000;
-+ do_div(temp, ro_scale);
-+
-+ volt_adjust = temp;
-+ volt_adjust *= sign;
-+
-+ return volt_adjust;
-+}
-+
-+/**
-+ * cpr3_parse_closed_loop_voltage_adjustments() - load per-fuse-corner and
-+ * per-corner closed-loop adjustment values from device tree
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @ro_sel: Array of ring oscillator values selected for each
-+ * fuse corner
-+ * @volt_adjust: Pointer to array which will be filled with the
-+ * per-corner closed-loop adjustment voltages
-+ * @volt_adjust_fuse: Pointer to array which will be filled with the
-+ * per-fuse-corner closed-loop adjustment voltages
-+ * @ro_scale: Pointer to array which will be filled with the
-+ * per-fuse-corner RO scaling factor values with units of
-+ * QUOT/V
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_parse_closed_loop_voltage_adjustments(
-+ struct cpr3_regulator *vreg, u64 *ro_sel,
-+ int *volt_adjust, int *volt_adjust_fuse, int *ro_scale)
-+{
-+ int i, rc;
-+ u32 *ro_all_scale;
-+
-+ char volt_adj[] = "qcom,cpr-closed-loop-voltage-adjustment";
-+ char volt_fuse_adj[] = "qcom,cpr-closed-loop-voltage-fuse-adjustment";
-+ char ro_scaling[] = "qcom,cpr-ro-scaling-factor";
-+
-+ if (!of_find_property(vreg->of_node, volt_adj, NULL)
-+ && !of_find_property(vreg->of_node, volt_fuse_adj, NULL)
-+ && !vreg->aging_allowed) {
-+ /* No adjustment required. */
-+ return 0;
-+ } else if (!of_find_property(vreg->of_node, ro_scaling, NULL)) {
-+ cpr3_err(vreg, "Missing %s required for closed-loop voltage adjustment.\n",
-+ ro_scaling);
-+ return -EINVAL;
-+ }
-+
-+ ro_all_scale = kcalloc(vreg->fuse_corner_count * CPR3_RO_COUNT,
-+ sizeof(*ro_all_scale), GFP_KERNEL);
-+ if (!ro_all_scale)
-+ return -ENOMEM;
-+
-+ rc = cpr3_parse_array_property(vreg, ro_scaling,
-+ vreg->fuse_corner_count * CPR3_RO_COUNT, ro_all_scale);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load RO scaling factors, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ for (i = 0; i < vreg->fuse_corner_count; i++)
-+ ro_scale[i] = ro_all_scale[i * CPR3_RO_COUNT + ro_sel[i]];
-+
-+ for (i = 0; i < vreg->corner_count; i++)
-+ memcpy(vreg->corner[i].ro_scale,
-+ &ro_all_scale[vreg->corner[i].cpr_fuse_corner * CPR3_RO_COUNT],
-+ sizeof(*ro_all_scale) * CPR3_RO_COUNT);
-+
-+ if (of_find_property(vreg->of_node, volt_fuse_adj, NULL)) {
-+ rc = cpr3_parse_array_property(vreg, volt_fuse_adj,
-+ vreg->fuse_corner_count, volt_adjust_fuse);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load closed-loop fused voltage adjustments, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ if (of_find_property(vreg->of_node, volt_adj, NULL)) {
-+ rc = cpr3_parse_corner_array_property(vreg, volt_adj,
-+ 1, volt_adjust);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load closed-loop voltage adjustments, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+done:
-+ kfree(ro_all_scale);
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_apm_init() - initialize APM data for a CPR3 controller
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * This function loads memory array power mux (APM) data from device tree
-+ * if it is present and requests a handle to the appropriate APM controller
-+ * device.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_apm_init(struct cpr3_controller *ctrl)
-+{
-+ struct device_node *node = ctrl->dev->of_node;
-+ int rc;
-+
-+ if (!of_find_property(node, "qcom,apm-ctrl", NULL)) {
-+ /* No APM used */
-+ return 0;
-+ }
-+
-+ ctrl->apm = msm_apm_ctrl_dev_get(ctrl->dev);
-+ if (IS_ERR(ctrl->apm)) {
-+ rc = PTR_ERR(ctrl->apm);
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "APM get failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ rc = of_property_read_u32(node, "qcom,apm-threshold-voltage",
-+ &ctrl->apm_threshold_volt);
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading qcom,apm-threshold-voltage, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ ctrl->apm_threshold_volt
-+ = CPR3_ROUND(ctrl->apm_threshold_volt, ctrl->step_volt);
-+
-+ /* No error check since this is an optional property. */
-+ of_property_read_u32(node, "qcom,apm-hysteresis-voltage",
-+ &ctrl->apm_adj_volt);
-+ ctrl->apm_adj_volt = CPR3_ROUND(ctrl->apm_adj_volt, ctrl->step_volt);
-+
-+ ctrl->apm_high_supply = MSM_APM_SUPPLY_APCC;
-+ ctrl->apm_low_supply = MSM_APM_SUPPLY_MX;
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr3_mem_acc_init() - initialize mem-acc regulator data for
-+ * a CPR3 regulator
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_mem_acc_init(struct cpr3_regulator *vreg)
-+{
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ u32 *temp;
-+ int i, rc;
-+
-+ if (!ctrl->mem_acc_regulator) {
-+ cpr3_info(ctrl, "not using memory accelerator regulator\n");
-+ return 0;
-+ }
-+
-+ temp = kcalloc(vreg->corner_count, sizeof(*temp), GFP_KERNEL);
-+ if (!temp)
-+ return -ENOMEM;
-+
-+ rc = cpr3_parse_corner_array_property(vreg, "qcom,mem-acc-voltage",
-+ 1, temp);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not load mem-acc corners, rc=%d\n", rc);
-+ } else {
-+ for (i = 0; i < vreg->corner_count; i++)
-+ vreg->corner[i].mem_acc_volt = temp[i];
-+ }
-+
-+ kfree(temp);
-+ return rc;
-+}
-+
-+/**
-+ * cpr4_load_core_and_temp_adj() - parse amount of voltage adjustment for
-+ * per-online-core and per-temperature voltage adjustment for a
-+ * given corner or corner band from device tree.
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @num: Corner number or corner band number
-+ * @use_corner_band: Boolean indicating if the CPR3 regulator supports
-+ * adjustments per corner band
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_load_core_and_temp_adj(struct cpr3_regulator *vreg,
-+ int num, bool use_corner_band)
-+{
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ struct cpr4_sdelta *sdelta;
-+ int sdelta_size, i, j, pos, rc = 0;
-+ char str[75];
-+ size_t buflen;
-+ char *buf;
-+
-+ sdelta = use_corner_band ? vreg->corner_band[num].sdelta :
-+ vreg->corner[num].sdelta;
-+
-+ if (!sdelta->allow_core_count_adj && !sdelta->allow_temp_adj) {
-+ /* corner doesn't need sdelta table */
-+ sdelta->max_core_count = 0;
-+ sdelta->temp_band_count = 0;
-+ return rc;
-+ }
-+
-+ sdelta_size = sdelta->max_core_count * sdelta->temp_band_count;
-+ if (use_corner_band)
-+ snprintf(str, sizeof(str),
-+ "corner_band=%d core_config_count=%d temp_band_count=%d sdelta_size=%d\n",
-+ num, sdelta->max_core_count,
-+ sdelta->temp_band_count, sdelta_size);
-+ else
-+ snprintf(str, sizeof(str),
-+ "corner=%d core_config_count=%d temp_band_count=%d sdelta_size=%d\n",
-+ num, sdelta->max_core_count,
-+ sdelta->temp_band_count, sdelta_size);
-+
-+ cpr3_debug(vreg, "%s", str);
-+
-+ sdelta->table = devm_kcalloc(ctrl->dev, sdelta_size,
-+ sizeof(*sdelta->table), GFP_KERNEL);
-+ if (!sdelta->table)
-+ return -ENOMEM;
-+
-+ if (use_corner_band)
-+ snprintf(str, sizeof(str),
-+ "qcom,cpr-corner-band%d-temp-core-voltage-adjustment",
-+ num + CPR3_CORNER_OFFSET);
-+ else
-+ snprintf(str, sizeof(str),
-+ "qcom,cpr-corner%d-temp-core-voltage-adjustment",
-+ num + CPR3_CORNER_OFFSET);
-+
-+ rc = cpr3_parse_array_property(vreg, str, sdelta_size,
-+ sdelta->table);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load %s, rc=%d\n", str, rc);
-+ return rc;
-+ }
-+
-+ /*
-+ * Convert sdelta margins from uV to PMIC steps and apply negation to
-+ * follow the SDELTA register semantics.
-+ */
-+ for (i = 0; i < sdelta_size; i++)
-+ sdelta->table[i] = -(sdelta->table[i] / ctrl->step_volt);
-+
-+ buflen = sizeof(*buf) * sdelta_size * (MAX_CHARS_PER_INT + 2);
-+ buf = kzalloc(buflen, GFP_KERNEL);
-+ if (!buf)
-+ return rc;
-+
-+ for (i = 0; i < sdelta->max_core_count; i++) {
-+ for (j = 0, pos = 0; j < sdelta->temp_band_count; j++)
-+ pos += scnprintf(buf + pos, buflen - pos, " %u",
-+ sdelta->table[i * sdelta->temp_band_count + j]);
-+ cpr3_debug(vreg, "sdelta[%d]:%s\n", i, buf);
-+ }
-+
-+ kfree(buf);
-+ return rc;
-+}
-+
-+/**
-+ * cpr4_parse_core_count_temp_voltage_adj() - parse configuration data for
-+ * per-online-core and per-temperature voltage adjustment for
-+ * a CPR3 regulator from device tree.
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @use_corner_band: Boolean indicating if the CPR3 regulator supports
-+ * adjustments per corner band
-+ *
-+ * This function supports parsing of per-online-core and per-temperature
-+ * adjustments per corner or per corner band. CPR controllers which support
-+ * corner bands apply the same adjustments to all corners within a corner band.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr4_parse_core_count_temp_voltage_adj(
-+ struct cpr3_regulator *vreg, bool use_corner_band)
-+{
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ struct device_node *node = vreg->of_node;
-+ struct cpr3_corner *corner;
-+ struct cpr4_sdelta *sdelta;
-+ int i, sdelta_table_count, rc = 0;
-+ int *allow_core_count_adj = NULL, *allow_temp_adj = NULL;
-+ char prop_str[75];
-+
-+ if (of_find_property(node, use_corner_band ?
-+ "qcom,corner-band-allow-temp-adjustment"
-+ : "qcom,corner-allow-temp-adjustment", NULL)) {
-+ if (!ctrl->allow_temp_adj) {
-+ cpr3_err(ctrl, "Temperature adjustment configurations missing\n");
-+ return -EINVAL;
-+ }
-+
-+ vreg->allow_temp_adj = true;
-+ }
-+
-+ if (of_find_property(node, use_corner_band ?
-+ "qcom,corner-band-allow-core-count-adjustment"
-+ : "qcom,corner-allow-core-count-adjustment",
-+ NULL)) {
-+ rc = of_property_read_u32(node, "qcom,max-core-count",
-+ &vreg->max_core_count);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading qcom,max-core-count, rc=%d\n",
-+ rc);
-+ return -EINVAL;
-+ }
-+
-+ vreg->allow_core_count_adj = true;
-+ ctrl->allow_core_count_adj = true;
-+ }
-+
-+ if (!vreg->allow_temp_adj && !vreg->allow_core_count_adj) {
-+ /*
-+ * Both per-online-core and temperature based adjustments are
-+ * disabled for this regulator.
-+ */
-+ return 0;
-+ } else if (!vreg->allow_core_count_adj) {
-+ /*
-+ * Only per-temperature voltage adjusments are allowed.
-+ * Keep max core count value as 1 to allocate SDELTA.
-+ */
-+ vreg->max_core_count = 1;
-+ }
-+
-+ if (vreg->allow_core_count_adj) {
-+ allow_core_count_adj = kcalloc(vreg->corner_count,
-+ sizeof(*allow_core_count_adj),
-+ GFP_KERNEL);
-+ if (!allow_core_count_adj)
-+ return -ENOMEM;
-+
-+ snprintf(prop_str, sizeof(prop_str), "%s", use_corner_band ?
-+ "qcom,corner-band-allow-core-count-adjustment" :
-+ "qcom,corner-allow-core-count-adjustment");
-+
-+ rc = use_corner_band ?
-+ cpr3_parse_corner_band_array_property(vreg, prop_str,
-+ 1, allow_core_count_adj) :
-+ cpr3_parse_corner_array_property(vreg, prop_str,
-+ 1, allow_core_count_adj);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading %s, rc=%d\n", prop_str,
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ if (vreg->allow_temp_adj) {
-+ allow_temp_adj = kcalloc(vreg->corner_count,
-+ sizeof(*allow_temp_adj), GFP_KERNEL);
-+ if (!allow_temp_adj) {
-+ rc = -ENOMEM;
-+ goto done;
-+ }
-+
-+ snprintf(prop_str, sizeof(prop_str), "%s", use_corner_band ?
-+ "qcom,corner-band-allow-temp-adjustment" :
-+ "qcom,corner-allow-temp-adjustment");
-+
-+ rc = use_corner_band ?
-+ cpr3_parse_corner_band_array_property(vreg, prop_str,
-+ 1, allow_temp_adj) :
-+ cpr3_parse_corner_array_property(vreg, prop_str,
-+ 1, allow_temp_adj);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading %s, rc=%d\n", prop_str,
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ sdelta_table_count = use_corner_band ? vreg->corner_band_count :
-+ vreg->corner_count;
-+
-+ for (i = 0; i < sdelta_table_count; i++) {
-+ sdelta = devm_kzalloc(ctrl->dev, sizeof(*corner->sdelta),
-+ GFP_KERNEL);
-+ if (!sdelta) {
-+ rc = -ENOMEM;
-+ goto done;
-+ }
-+
-+ if (allow_core_count_adj)
-+ sdelta->allow_core_count_adj = allow_core_count_adj[i];
-+ if (allow_temp_adj)
-+ sdelta->allow_temp_adj = allow_temp_adj[i];
-+ sdelta->max_core_count = vreg->max_core_count;
-+ sdelta->temp_band_count = ctrl->temp_band_count;
-+
-+ if (use_corner_band)
-+ vreg->corner_band[i].sdelta = sdelta;
-+ else
-+ vreg->corner[i].sdelta = sdelta;
-+
-+ rc = cpr4_load_core_and_temp_adj(vreg, i, use_corner_band);
-+ if (rc) {
-+ cpr3_err(vreg, "corner/band %d core and temp adjustment loading failed, rc=%d\n",
-+ i, rc);
-+ goto done;
-+ }
-+ }
-+
-+done:
-+ kfree(allow_core_count_adj);
-+ kfree(allow_temp_adj);
-+
-+ return rc;
-+}
-+
-+/**
-+ * cprh_adjust_voltages_for_apm() - adjust per-corner floor and ceiling voltages
-+ * so that they do not overlap the APM threshold voltage.
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * The memory array power mux (APM) must be configured for a specific supply
-+ * based upon where the VDD voltage lies with respect to the APM threshold
-+ * voltage. When using CPR hardware closed-loop, the voltage may vary anywhere
-+ * between the floor and ceiling voltage without software notification.
-+ * Therefore, it is required that the floor to ceiling range for every corner
-+ * not intersect the APM threshold voltage. This function adjusts the floor to
-+ * ceiling range for each corner which violates this requirement.
-+ *
-+ * The following algorithm is applied:
-+ * if floor < threshold <= ceiling:
-+ * if open_loop >= threshold, then floor = threshold - adj
-+ * else ceiling = threshold - step
-+ * where:
-+ * adj = APM hysteresis voltage established to minimize the number of
-+ * corners with artificially increased floor voltages
-+ * step = voltage in microvolts of a single step of the VDD supply
-+ *
-+ * The open-loop voltage is also bounded by the new floor or ceiling value as
-+ * needed.
-+ *
-+ * Return: none
-+ */
-+void cprh_adjust_voltages_for_apm(struct cpr3_regulator *vreg)
-+{
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ struct cpr3_corner *corner;
-+ int i, adj, threshold, prev_ceiling, prev_floor, prev_open_loop;
-+
-+ if (!ctrl->apm_threshold_volt) {
-+ /* APM not being used. */
-+ return;
-+ }
-+
-+ ctrl->apm_threshold_volt = CPR3_ROUND(ctrl->apm_threshold_volt,
-+ ctrl->step_volt);
-+ ctrl->apm_adj_volt = CPR3_ROUND(ctrl->apm_adj_volt, ctrl->step_volt);
-+
-+ threshold = ctrl->apm_threshold_volt;
-+ adj = ctrl->apm_adj_volt;
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ corner = &vreg->corner[i];
-+
-+ if (threshold <= corner->floor_volt
-+ || threshold > corner->ceiling_volt)
-+ continue;
-+
-+ prev_floor = corner->floor_volt;
-+ prev_ceiling = corner->ceiling_volt;
-+ prev_open_loop = corner->open_loop_volt;
-+
-+ if (corner->open_loop_volt >= threshold) {
-+ corner->floor_volt = max(corner->floor_volt,
-+ threshold - adj);
-+ if (corner->open_loop_volt < corner->floor_volt)
-+ corner->open_loop_volt = corner->floor_volt;
-+ } else {
-+ corner->ceiling_volt = threshold - ctrl->step_volt;
-+ }
-+
-+ if (corner->floor_volt != prev_floor
-+ || corner->ceiling_volt != prev_ceiling
-+ || corner->open_loop_volt != prev_open_loop)
-+ cpr3_debug(vreg, "APM threshold=%d, APM adj=%d changed corner %d voltages; prev: floor=%d, ceiling=%d, open-loop=%d; new: floor=%d, ceiling=%d, open-loop=%d\n",
-+ threshold, adj, i, prev_floor, prev_ceiling,
-+ prev_open_loop, corner->floor_volt,
-+ corner->ceiling_volt, corner->open_loop_volt);
-+ }
-+}
-+
-+/**
-+ * cprh_adjust_voltages_for_mem_acc() - adjust per-corner floor and ceiling
-+ * voltages so that they do not intersect the MEM ACC threshold
-+ * voltage
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * The following algorithm is applied:
-+ * if floor < threshold <= ceiling:
-+ * if open_loop >= threshold, then floor = threshold
-+ * else ceiling = threshold - step
-+ * where:
-+ * step = voltage in microvolts of a single step of the VDD supply
-+ *
-+ * The open-loop voltage is also bounded by the new floor or ceiling value as
-+ * needed.
-+ *
-+ * Return: none
-+ */
-+void cprh_adjust_voltages_for_mem_acc(struct cpr3_regulator *vreg)
-+{
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ struct cpr3_corner *corner;
-+ int i, threshold, prev_ceiling, prev_floor, prev_open_loop;
-+
-+ if (!ctrl->mem_acc_threshold_volt) {
-+ /* MEM ACC not being used. */
-+ return;
-+ }
-+
-+ ctrl->mem_acc_threshold_volt = CPR3_ROUND(ctrl->mem_acc_threshold_volt,
-+ ctrl->step_volt);
-+
-+ threshold = ctrl->mem_acc_threshold_volt;
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ corner = &vreg->corner[i];
-+
-+ if (threshold <= corner->floor_volt
-+ || threshold > corner->ceiling_volt)
-+ continue;
-+
-+ prev_floor = corner->floor_volt;
-+ prev_ceiling = corner->ceiling_volt;
-+ prev_open_loop = corner->open_loop_volt;
-+
-+ if (corner->open_loop_volt >= threshold) {
-+ corner->floor_volt = max(corner->floor_volt, threshold);
-+ if (corner->open_loop_volt < corner->floor_volt)
-+ corner->open_loop_volt = corner->floor_volt;
-+ } else {
-+ corner->ceiling_volt = threshold - ctrl->step_volt;
-+ }
-+
-+ if (corner->floor_volt != prev_floor
-+ || corner->ceiling_volt != prev_ceiling
-+ || corner->open_loop_volt != prev_open_loop)
-+ cpr3_debug(vreg, "MEM ACC threshold=%d changed corner %d voltages; prev: floor=%d, ceiling=%d, open-loop=%d; new: floor=%d, ceiling=%d, open-loop=%d\n",
-+ threshold, i, prev_floor, prev_ceiling,
-+ prev_open_loop, corner->floor_volt,
-+ corner->ceiling_volt, corner->open_loop_volt);
-+ }
-+}
-+
-+/**
-+ * cpr3_apply_closed_loop_offset_voltages() - modify the closed-loop voltage
-+ * adjustments by the amounts that are needed for this
-+ * fuse combo
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @volt_adjust: Array of closed-loop voltage adjustment values of length
-+ * vreg->corner_count which is further adjusted based upon
-+ * offset voltage fuse values.
-+ * @fuse_volt_adjust: Fused closed-loop voltage adjustment values of length
-+ * vreg->fuse_corner_count.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr3_apply_closed_loop_offset_voltages(struct cpr3_regulator *vreg,
-+ int *volt_adjust, int *fuse_volt_adjust)
-+{
-+ u32 *corner_map;
-+ int rc = 0, i;
-+
-+ if (!of_find_property(vreg->of_node,
-+ "qcom,cpr-fused-closed-loop-voltage-adjustment-map", NULL)) {
-+ /* No closed-loop offset required. */
-+ return 0;
-+ }
-+
-+ corner_map = kcalloc(vreg->corner_count, sizeof(*corner_map),
-+ GFP_KERNEL);
-+ if (!corner_map)
-+ return -ENOMEM;
-+
-+ rc = cpr3_parse_corner_array_property(vreg,
-+ "qcom,cpr-fused-closed-loop-voltage-adjustment-map",
-+ 1, corner_map);
-+ if (rc)
-+ goto done;
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ if (corner_map[i] == 0) {
-+ continue;
-+ } else if (corner_map[i] > vreg->fuse_corner_count) {
-+ cpr3_err(vreg, "corner %d mapped to invalid fuse corner: %u\n",
-+ i, corner_map[i]);
-+ rc = -EINVAL;
-+ goto done;
-+ }
-+
-+ volt_adjust[i] += fuse_volt_adjust[corner_map[i] - 1];
-+ }
-+
-+done:
-+ kfree(corner_map);
-+ return rc;
-+}
-+
-+/**
-+ * cpr3_enforce_inc_quotient_monotonicity() - Ensure that target quotients
-+ * increase monotonically from lower to higher corners
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static void cpr3_enforce_inc_quotient_monotonicity(struct cpr3_regulator *vreg)
-+{
-+ int i, j;
-+
-+ for (i = 1; i < vreg->corner_count; i++) {
-+ for (j = 0; j < CPR3_RO_COUNT; j++) {
-+ if (vreg->corner[i].target_quot[j]
-+ && vreg->corner[i].target_quot[j]
-+ < vreg->corner[i - 1].target_quot[j]) {
-+ cpr3_debug(vreg, "corner %d RO%u target quot=%u < corner %d RO%u target quot=%u; overriding: corner %d RO%u target quot=%u\n",
-+ i, j,
-+ vreg->corner[i].target_quot[j],
-+ i - 1, j,
-+ vreg->corner[i - 1].target_quot[j],
-+ i, j,
-+ vreg->corner[i - 1].target_quot[j]);
-+ vreg->corner[i].target_quot[j]
-+ = vreg->corner[i - 1].target_quot[j];
-+ }
-+ }
-+ }
-+}
-+
-+/**
-+ * cpr3_enforce_dec_quotient_monotonicity() - Ensure that target quotients
-+ * decrease monotonically from higher to lower corners
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static void cpr3_enforce_dec_quotient_monotonicity(struct cpr3_regulator *vreg)
-+{
-+ int i, j;
-+
-+ for (i = vreg->corner_count - 2; i >= 0; i--) {
-+ for (j = 0; j < CPR3_RO_COUNT; j++) {
-+ if (vreg->corner[i + 1].target_quot[j]
-+ && vreg->corner[i].target_quot[j]
-+ > vreg->corner[i + 1].target_quot[j]) {
-+ cpr3_debug(vreg, "corner %d RO%u target quot=%u > corner %d RO%u target quot=%u; overriding: corner %d RO%u target quot=%u\n",
-+ i, j,
-+ vreg->corner[i].target_quot[j],
-+ i + 1, j,
-+ vreg->corner[i + 1].target_quot[j],
-+ i, j,
-+ vreg->corner[i + 1].target_quot[j]);
-+ vreg->corner[i].target_quot[j]
-+ = vreg->corner[i + 1].target_quot[j];
-+ }
-+ }
-+ }
-+}
-+
-+/**
-+ * _cpr3_adjust_target_quotients() - adjust the target quotients for each
-+ * corner of the regulator according to input adjustment and
-+ * scaling arrays
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @volt_adjust: Pointer to an array of closed-loop voltage adjustments
-+ * with units of microvolts. The array must have
-+ * vreg->corner_count number of elements.
-+ * @ro_scale: Pointer to a flattened 2D array of RO scaling factors.
-+ * The array must have an inner dimension of CPR3_RO_COUNT
-+ * and an outer dimension of vreg->corner_count
-+ * @label: Null terminated string providing a label for the type
-+ * of adjustment.
-+ *
-+ * Return: true if any corners received a positive voltage adjustment (> 0),
-+ * else false
-+ */
-+static bool _cpr3_adjust_target_quotients(struct cpr3_regulator *vreg,
-+ const int *volt_adjust, const int *ro_scale, const char *label)
-+{
-+ int i, j, quot_adjust;
-+ bool is_increasing = false;
-+ u32 prev_quot;
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ for (j = 0; j < CPR3_RO_COUNT; j++) {
-+ if (vreg->corner[i].target_quot[j]) {
-+ quot_adjust = cpr3_quot_adjustment(
-+ ro_scale[i * CPR3_RO_COUNT + j],
-+ volt_adjust[i]);
-+ if (quot_adjust) {
-+ prev_quot = vreg->corner[i].
-+ target_quot[j];
-+ vreg->corner[i].target_quot[j]
-+ += quot_adjust;
-+ cpr3_debug(vreg, "adjusted corner %d RO%d target quot %s: %u --> %u (%d uV)\n",
-+ i, j, label, prev_quot,
-+ vreg->corner[i].target_quot[j],
-+ volt_adjust[i]);
-+ }
-+ }
-+ }
-+ if (volt_adjust[i] > 0)
-+ is_increasing = true;
-+ }
-+
-+ return is_increasing;
-+}
-+
-+/**
-+ * cpr3_adjust_target_quotients() - adjust the target quotients for each
-+ * corner according to device tree values and fuse values
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @fuse_volt_adjust: Fused closed-loop voltage adjustment values of length
-+ * vreg->fuse_corner_count. This parameter could be null
-+ * pointer when no fused adjustments are needed.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+int cpr3_adjust_target_quotients(struct cpr3_regulator *vreg,
-+ int *fuse_volt_adjust)
-+{
-+ int i, rc;
-+ int *volt_adjust, *ro_scale;
-+ bool explicit_adjustment, fused_adjustment, is_increasing;
-+
-+ explicit_adjustment = of_find_property(vreg->of_node,
-+ "qcom,cpr-closed-loop-voltage-adjustment", NULL);
-+ fused_adjustment = of_find_property(vreg->of_node,
-+ "qcom,cpr-fused-closed-loop-voltage-adjustment-map", NULL);
-+
-+ if (!explicit_adjustment && !fused_adjustment && !vreg->aging_allowed) {
-+ /* No adjustment required. */
-+ return 0;
-+ } else if (!of_find_property(vreg->of_node,
-+ "qcom,cpr-ro-scaling-factor", NULL)) {
-+ cpr3_err(vreg, "qcom,cpr-ro-scaling-factor is required for closed-loop voltage adjustment, but is missing\n");
-+ return -EINVAL;
-+ }
-+
-+ volt_adjust = kcalloc(vreg->corner_count, sizeof(*volt_adjust),
-+ GFP_KERNEL);
-+ ro_scale = kcalloc(vreg->corner_count * CPR3_RO_COUNT,
-+ sizeof(*ro_scale), GFP_KERNEL);
-+ if (!volt_adjust || !ro_scale) {
-+ rc = -ENOMEM;
-+ goto done;
-+ }
-+
-+ rc = cpr3_parse_corner_array_property(vreg,
-+ "qcom,cpr-ro-scaling-factor", CPR3_RO_COUNT, ro_scale);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load RO scaling factors, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ for (i = 0; i < vreg->corner_count; i++)
-+ memcpy(vreg->corner[i].ro_scale, &ro_scale[i * CPR3_RO_COUNT],
-+ sizeof(*ro_scale) * CPR3_RO_COUNT);
-+
-+ if (explicit_adjustment) {
-+ rc = cpr3_parse_corner_array_property(vreg,
-+ "qcom,cpr-closed-loop-voltage-adjustment",
-+ 1, volt_adjust);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load closed-loop voltage adjustments, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ _cpr3_adjust_target_quotients(vreg, volt_adjust, ro_scale,
-+ "from DT");
-+ cpr3_enforce_inc_quotient_monotonicity(vreg);
-+ }
-+
-+ if (fused_adjustment && fuse_volt_adjust) {
-+ memset(volt_adjust, 0,
-+ sizeof(*volt_adjust) * vreg->corner_count);
-+
-+ rc = cpr3_apply_closed_loop_offset_voltages(vreg, volt_adjust,
-+ fuse_volt_adjust);
-+ if (rc) {
-+ cpr3_err(vreg, "could not apply fused closed-loop voltage reductions, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ is_increasing = _cpr3_adjust_target_quotients(vreg, volt_adjust,
-+ ro_scale, "from fuse");
-+ if (is_increasing)
-+ cpr3_enforce_inc_quotient_monotonicity(vreg);
-+ else
-+ cpr3_enforce_dec_quotient_monotonicity(vreg);
-+ }
-+
-+done:
-+ kfree(volt_adjust);
-+ kfree(ro_scale);
-+ return rc;
-+}
---- /dev/null
-+++ b/drivers/regulator/cpr4-apss-regulator.c
-@@ -0,0 +1,1819 @@
-+/*
-+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define pr_fmt(fmt) "%s: " fmt, __func__
-+
-+#include <linux/bitops.h>
-+#include <linux/debugfs.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/uaccess.h>
-+#include <linux/regulator/driver.h>
-+#include <linux/regulator/machine.h>
-+#include <linux/regulator/of_regulator.h>
-+
-+#include "cpr3-regulator.h"
-+
-+#define IPQ807x_APSS_FUSE_CORNERS 4
-+#define IPQ817x_APPS_FUSE_CORNERS 2
-+#define IPQ6018_APSS_FUSE_CORNERS 4
-+#define IPQ9574_APSS_FUSE_CORNERS 4
-+
-+u32 g_valid_fuse_count = IPQ807x_APSS_FUSE_CORNERS;
-+
-+/**
-+ * struct cpr4_ipq807x_apss_fuses - APSS specific fuse data for IPQ807x
-+ * @ro_sel: Ring oscillator select fuse parameter value for each
-+ * fuse corner
-+ * @init_voltage: Initial (i.e. open-loop) voltage fuse parameter value
-+ * for each fuse corner (raw, not converted to a voltage)
-+ * @target_quot: CPR target quotient fuse parameter value for each fuse
-+ * corner
-+ * @quot_offset: CPR target quotient offset fuse parameter value for each
-+ * fuse corner (raw, not unpacked) used for target quotient
-+ * interpolation
-+ * @speed_bin: Application processor speed bin fuse parameter value for
-+ * the given chip
-+ * @cpr_fusing_rev: CPR fusing revision fuse parameter value
-+ * @boost_cfg: CPR boost configuration fuse parameter value
-+ * @boost_voltage: CPR boost voltage fuse parameter value (raw, not
-+ * converted to a voltage)
-+ *
-+ * This struct holds the values for all of the fuses read from memory.
-+ */
-+struct cpr4_ipq807x_apss_fuses {
-+ u64 ro_sel[IPQ807x_APSS_FUSE_CORNERS];
-+ u64 init_voltage[IPQ807x_APSS_FUSE_CORNERS];
-+ u64 target_quot[IPQ807x_APSS_FUSE_CORNERS];
-+ u64 quot_offset[IPQ807x_APSS_FUSE_CORNERS];
-+ u64 speed_bin;
-+ u64 cpr_fusing_rev;
-+ u64 boost_cfg;
-+ u64 boost_voltage;
-+ u64 misc;
-+};
-+
-+/*
-+ * fuse combo = fusing revision + 8 * (speed bin)
-+ * where: fusing revision = 0 - 7 and speed bin = 0 - 7
-+ */
-+#define CPR4_IPQ807x_APSS_FUSE_COMBO_COUNT 64
-+
-+/*
-+ * Constants which define the name of each fuse corner.
-+ */
-+enum cpr4_ipq807x_apss_fuse_corner {
-+ CPR4_IPQ807x_APSS_FUSE_CORNER_SVS = 0,
-+ CPR4_IPQ807x_APSS_FUSE_CORNER_NOM = 1,
-+ CPR4_IPQ807x_APSS_FUSE_CORNER_TURBO = 2,
-+ CPR4_IPQ807x_APSS_FUSE_CORNER_STURBO = 3,
-+};
-+
-+static const char * const cpr4_ipq807x_apss_fuse_corner_name[] = {
-+ [CPR4_IPQ807x_APSS_FUSE_CORNER_SVS] = "SVS",
-+ [CPR4_IPQ807x_APSS_FUSE_CORNER_NOM] = "NOM",
-+ [CPR4_IPQ807x_APSS_FUSE_CORNER_TURBO] = "TURBO",
-+ [CPR4_IPQ807x_APSS_FUSE_CORNER_STURBO] = "STURBO",
-+};
-+
-+/*
-+ * IPQ807x APSS fuse parameter locations:
-+ *
-+ * Structs are organized with the following dimensions:
-+ * Outer: 0 to 3 for fuse corners from lowest to highest corner
-+ * Inner: large enough to hold the longest set of parameter segments which
-+ * fully defines a fuse parameter, +1 (for NULL termination).
-+ * Each segment corresponds to a contiguous group of bits from a
-+ * single fuse row. These segments are concatentated together in
-+ * order to form the full fuse parameter value. The segments for
-+ * a given parameter may correspond to different fuse rows.
-+ */
-+static struct cpr3_fuse_param
-+ipq807x_apss_ro_sel_param[IPQ807x_APSS_FUSE_CORNERS][2] = {
-+ {{73, 8, 11}, {} },
-+ {{73, 4, 7}, {} },
-+ {{73, 0, 3}, {} },
-+ {{73, 12, 15}, {} },
-+};
-+
-+static struct cpr3_fuse_param
-+ipq807x_apss_init_voltage_param[IPQ807x_APSS_FUSE_CORNERS][2] = {
-+ {{71, 18, 23}, {} },
-+ {{71, 12, 17}, {} },
-+ {{71, 6, 11}, {} },
-+ {{71, 0, 5}, {} },
-+};
-+
-+static struct cpr3_fuse_param
-+ipq807x_apss_target_quot_param[IPQ807x_APSS_FUSE_CORNERS][2] = {
-+ {{72, 32, 43}, {} },
-+ {{72, 20, 31}, {} },
-+ {{72, 8, 19}, {} },
-+ {{72, 44, 55}, {} },
-+};
-+
-+static struct cpr3_fuse_param
-+ipq807x_apss_quot_offset_param[IPQ807x_APSS_FUSE_CORNERS][2] = {
-+ {{} },
-+ {{71, 46, 52}, {} },
-+ {{71, 39, 45}, {} },
-+ {{71, 32, 38}, {} },
-+};
-+
-+static struct cpr3_fuse_param ipq807x_cpr_fusing_rev_param[] = {
-+ {71, 53, 55},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq807x_apss_speed_bin_param[] = {
-+ {36, 40, 42},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq807x_cpr_boost_fuse_cfg_param[] = {
-+ {36, 43, 45},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq807x_apss_boost_fuse_volt_param[] = {
-+ {71, 0, 5},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq807x_misc_fuse_volt_adj_param[] = {
-+ {36, 54, 54},
-+ {},
-+};
-+
-+static struct cpr3_fuse_parameters ipq807x_fuse_params = {
-+ .apss_ro_sel_param = ipq807x_apss_ro_sel_param,
-+ .apss_init_voltage_param = ipq807x_apss_init_voltage_param,
-+ .apss_target_quot_param = ipq807x_apss_target_quot_param,
-+ .apss_quot_offset_param = ipq807x_apss_quot_offset_param,
-+ .cpr_fusing_rev_param = ipq807x_cpr_fusing_rev_param,
-+ .apss_speed_bin_param = ipq807x_apss_speed_bin_param,
-+ .cpr_boost_fuse_cfg_param = ipq807x_cpr_boost_fuse_cfg_param,
-+ .apss_boost_fuse_volt_param = ipq807x_apss_boost_fuse_volt_param,
-+ .misc_fuse_volt_adj_param = ipq807x_misc_fuse_volt_adj_param
-+};
-+
-+/*
-+ * The number of possible values for misc fuse is
-+ * 2^(#bits defined for misc fuse)
-+ */
-+#define IPQ807x_MISC_FUSE_VAL_COUNT BIT(1)
-+
-+/*
-+ * Open loop voltage fuse reference voltages in microvolts for IPQ807x
-+ */
-+static int ipq807x_apss_fuse_ref_volt
-+ [IPQ807x_APSS_FUSE_CORNERS] = {
-+ 720000,
-+ 864000,
-+ 992000,
-+ 1064000,
-+};
-+
-+#define IPQ807x_APSS_FUSE_STEP_VOLT 8000
-+#define IPQ807x_APSS_VOLTAGE_FUSE_SIZE 6
-+#define IPQ807x_APSS_QUOT_OFFSET_SCALE 5
-+
-+#define IPQ807x_APSS_CPR_SENSOR_COUNT 6
-+
-+#define IPQ807x_APSS_CPR_CLOCK_RATE 19200000
-+
-+#define IPQ807x_APSS_MAX_TEMP_POINTS 3
-+#define IPQ807x_APSS_TEMP_SENSOR_ID_START 4
-+#define IPQ807x_APSS_TEMP_SENSOR_ID_END 13
-+/*
-+ * Boost voltage fuse reference and ceiling voltages in microvolts for
-+ * IPQ807x.
-+ */
-+#define IPQ807x_APSS_BOOST_FUSE_REF_VOLT 1140000
-+#define IPQ807x_APSS_BOOST_CEILING_VOLT 1140000
-+#define IPQ807x_APSS_BOOST_FLOOR_VOLT 900000
-+#define MAX_BOOST_CONFIG_FUSE_VALUE 8
-+
-+#define IPQ807x_APSS_CPR_SDELTA_CORE_COUNT 15
-+
-+#define IPQ807x_APSS_CPR_TCSR_START 8
-+#define IPQ807x_APSS_CPR_TCSR_END 9
-+
-+/*
-+ * Array of integer values mapped to each of the boost config fuse values to
-+ * indicate boost enable/disable status.
-+ */
-+static bool boost_fuse[MAX_BOOST_CONFIG_FUSE_VALUE] = {0, 1, 1, 1, 1, 1, 1, 1};
-+
-+/*
-+ * IPQ6018 (Few parameters are changed, remaining are same as IPQ807x)
-+ */
-+#define IPQ6018_APSS_FUSE_STEP_VOLT 12500
-+#define IPQ6018_APSS_CPR_CLOCK_RATE 24000000
-+
-+static struct cpr3_fuse_param
-+ipq6018_apss_ro_sel_param[IPQ6018_APSS_FUSE_CORNERS][2] = {
-+ {{75, 8, 11}, {} },
-+ {{75, 4, 7}, {} },
-+ {{75, 0, 3}, {} },
-+ {{75, 12, 15}, {} },
-+};
-+
-+static struct cpr3_fuse_param
-+ipq6018_apss_init_voltage_param[IPQ6018_APSS_FUSE_CORNERS][2] = {
-+ {{73, 18, 23}, {} },
-+ {{73, 12, 17}, {} },
-+ {{73, 6, 11}, {} },
-+ {{73, 0, 5}, {} },
-+};
-+
-+static struct cpr3_fuse_param
-+ipq6018_apss_target_quot_param[IPQ6018_APSS_FUSE_CORNERS][2] = {
-+ {{74, 32, 43}, {} },
-+ {{74, 20, 31}, {} },
-+ {{74, 8, 19}, {} },
-+ {{74, 44, 55}, {} },
-+};
-+
-+static struct cpr3_fuse_param
-+ipq6018_apss_quot_offset_param[IPQ6018_APSS_FUSE_CORNERS][2] = {
-+ {{} },
-+ {{73, 48, 55}, {} },
-+ {{73, 40, 47}, {} },
-+ {{73, 32, 39}, {} },
-+};
-+
-+static struct cpr3_fuse_param ipq6018_cpr_fusing_rev_param[] = {
-+ {75, 16, 18},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq6018_apss_speed_bin_param[] = {
-+ {36, 40, 42},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq6018_cpr_boost_fuse_cfg_param[] = {
-+ {36, 43, 45},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq6018_apss_boost_fuse_volt_param[] = {
-+ {73, 0, 5},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq6018_misc_fuse_volt_adj_param[] = {
-+ {36, 54, 54},
-+ {},
-+};
-+
-+static struct cpr3_fuse_parameters ipq6018_fuse_params = {
-+ .apss_ro_sel_param = ipq6018_apss_ro_sel_param,
-+ .apss_init_voltage_param = ipq6018_apss_init_voltage_param,
-+ .apss_target_quot_param = ipq6018_apss_target_quot_param,
-+ .apss_quot_offset_param = ipq6018_apss_quot_offset_param,
-+ .cpr_fusing_rev_param = ipq6018_cpr_fusing_rev_param,
-+ .apss_speed_bin_param = ipq6018_apss_speed_bin_param,
-+ .cpr_boost_fuse_cfg_param = ipq6018_cpr_boost_fuse_cfg_param,
-+ .apss_boost_fuse_volt_param = ipq6018_apss_boost_fuse_volt_param,
-+ .misc_fuse_volt_adj_param = ipq6018_misc_fuse_volt_adj_param
-+};
-+
-+
-+/*
-+ * Boost voltage fuse reference and ceiling voltages in microvolts for
-+ * IPQ6018.
-+ */
-+#define IPQ6018_APSS_BOOST_FUSE_REF_VOLT 1140000
-+#define IPQ6018_APSS_BOOST_CEILING_VOLT 1140000
-+#define IPQ6018_APSS_BOOST_FLOOR_VOLT 900000
-+
-+/*
-+ * Open loop voltage fuse reference voltages in microvolts for IPQ807x
-+ */
-+static int ipq6018_apss_fuse_ref_volt
-+ [IPQ6018_APSS_FUSE_CORNERS] = {
-+ 725000,
-+ 862500,
-+ 987500,
-+ 1062500,
-+};
-+
-+/*
-+ * IPQ6018 Memory ACC settings on TCSR
-+ *
-+ * Turbo_L1: write TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0 0x10
-+ * write TCSR_CUSTOM_VDDAPC0_ACC_1 0x1
-+ * Other modes: write TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0 0x0
-+ * write TCSR_CUSTOM_VDDAPC0_ACC_1 0x0
-+ *
-+ */
-+#define IPQ6018_APSS_MEM_ACC_TCSR_COUNT 2
-+#define TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0 0x1946178
-+#define TCSR_CUSTOM_VDDAPC0_ACC_1 0x1946124
-+
-+struct mem_acc_tcsr {
-+ u32 phy_addr;
-+ void __iomem *ioremap_addr;
-+ u32 value;
-+};
-+
-+static struct mem_acc_tcsr ipq6018_mem_acc_tcsr[IPQ6018_APSS_MEM_ACC_TCSR_COUNT] = {
-+ {TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0, NULL, 0x10},
-+ {TCSR_CUSTOM_VDDAPC0_ACC_1, NULL, 0x1},
-+};
-+
-+/*
-+ * IPQ9574 (Few parameters are changed, remaining are same as IPQ6018)
-+ */
-+#define IPQ9574_APSS_FUSE_STEP_VOLT 10000
-+
-+static struct cpr3_fuse_param
-+ipq9574_apss_ro_sel_param[IPQ9574_APSS_FUSE_CORNERS][2] = {
-+ {{107, 4, 7}, {} },
-+ {{107, 0, 3}, {} },
-+ {{106, 4, 7}, {} },
-+ {{106, 0, 3}, {} },
-+};
-+
-+static struct cpr3_fuse_param
-+ipq9574_apss_init_voltage_param[IPQ9574_APSS_FUSE_CORNERS][2] = {
-+ {{104, 24, 29}, {} },
-+ {{104, 18, 23}, {} },
-+ {{104, 12, 17}, {} },
-+ {{104, 6, 11}, {} },
-+};
-+
-+static struct cpr3_fuse_param
-+ipq9574_apss_target_quot_param[IPQ9574_APSS_FUSE_CORNERS][2] = {
-+ {{106, 32, 43}, {} },
-+ {{106, 20, 31}, {} },
-+ {{106, 8, 19}, {} },
-+ {{106, 44, 55}, {} },
-+};
-+
-+static struct cpr3_fuse_param
-+ipq9574_apss_quot_offset_param[IPQ9574_APSS_FUSE_CORNERS][2] = {
-+ {{} },
-+ {{105, 48, 55}, {} },
-+ {{105, 40, 47}, {} },
-+ {{105, 32, 39}, {} },
-+};
-+
-+static struct cpr3_fuse_param ipq9574_cpr_fusing_rev_param[] = {
-+ {107, 8, 10},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq9574_apss_speed_bin_param[] = {
-+ {0, 40, 42},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq9574_cpr_boost_fuse_cfg_param[] = {
-+ {0, 43, 45},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq9574_apss_boost_fuse_volt_param[] = {
-+ {104, 0, 5},
-+ {},
-+};
-+
-+static struct cpr3_fuse_param ipq9574_misc_fuse_volt_adj_param[] = {
-+ {0, 54, 54},
-+ {},
-+};
-+
-+static struct cpr3_fuse_parameters ipq9574_fuse_params = {
-+ .apss_ro_sel_param = ipq9574_apss_ro_sel_param,
-+ .apss_init_voltage_param = ipq9574_apss_init_voltage_param,
-+ .apss_target_quot_param = ipq9574_apss_target_quot_param,
-+ .apss_quot_offset_param = ipq9574_apss_quot_offset_param,
-+ .cpr_fusing_rev_param = ipq9574_cpr_fusing_rev_param,
-+ .apss_speed_bin_param = ipq9574_apss_speed_bin_param,
-+ .cpr_boost_fuse_cfg_param = ipq9574_cpr_boost_fuse_cfg_param,
-+ .apss_boost_fuse_volt_param = ipq9574_apss_boost_fuse_volt_param,
-+ .misc_fuse_volt_adj_param = ipq9574_misc_fuse_volt_adj_param
-+};
-+
-+/*
-+ * Open loop voltage fuse reference voltages in microvolts for IPQ9574
-+ */
-+static int ipq9574_apss_fuse_ref_volt
-+ [IPQ9574_APSS_FUSE_CORNERS] = {
-+ 725000,
-+ 862500,
-+ 987500,
-+ 1062500,
-+};
-+
-+/**
-+ * cpr4_ipq807x_apss_read_fuse_data() - load APSS specific fuse parameter values
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * This function allocates a cpr4_ipq807x_apss_fuses struct, fills it with
-+ * values read out of hardware fuses, and finally copies common fuse values
-+ * into the CPR3 regulator struct.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_ipq807x_apss_read_fuse_data(struct cpr3_regulator *vreg)
-+{
-+ void __iomem *base = vreg->thread->ctrl->fuse_base;
-+ struct cpr4_ipq807x_apss_fuses *fuse;
-+ int i, rc;
-+
-+ fuse = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*fuse), GFP_KERNEL);
-+ if (!fuse)
-+ return -ENOMEM;
-+
-+ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->apss_speed_bin_param,
-+ &fuse->speed_bin);
-+ if (rc) {
-+ cpr3_err(vreg, "Unable to read speed bin fuse, rc=%d\n", rc);
-+ return rc;
-+ }
-+ cpr3_info(vreg, "speed bin = %llu\n", fuse->speed_bin);
-+
-+ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->cpr_fusing_rev_param,
-+ &fuse->cpr_fusing_rev);
-+ if (rc) {
-+ cpr3_err(vreg, "Unable to read CPR fusing revision fuse, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ cpr3_info(vreg, "CPR fusing revision = %llu\n", fuse->cpr_fusing_rev);
-+
-+ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->misc_fuse_volt_adj_param,
-+ &fuse->misc);
-+ if (rc) {
-+ cpr3_err(vreg, "Unable to read misc voltage adjustment fuse, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ cpr3_info(vreg, "CPR misc fuse value = %llu\n", fuse->misc);
-+ if (fuse->misc >= IPQ807x_MISC_FUSE_VAL_COUNT) {
-+ cpr3_err(vreg, "CPR misc fuse value = %llu, should be < %lu\n",
-+ fuse->misc, IPQ807x_MISC_FUSE_VAL_COUNT);
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < g_valid_fuse_count; i++) {
-+ rc = cpr3_read_fuse_param(base,
-+ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_init_voltage_param[i],
-+ &fuse->init_voltage[i]);
-+ if (rc) {
-+ cpr3_err(vreg, "Unable to read fuse-corner %d initial voltage fuse, rc=%d\n",
-+ i, rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_read_fuse_param(base,
-+ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_target_quot_param[i],
-+ &fuse->target_quot[i]);
-+ if (rc) {
-+ cpr3_err(vreg, "Unable to read fuse-corner %d target quotient fuse, rc=%d\n",
-+ i, rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_read_fuse_param(base,
-+ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_ro_sel_param[i],
-+ &fuse->ro_sel[i]);
-+ if (rc) {
-+ cpr3_err(vreg, "Unable to read fuse-corner %d RO select fuse, rc=%d\n",
-+ i, rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_read_fuse_param(base,
-+ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_quot_offset_param[i],
-+ &fuse->quot_offset[i]);
-+ if (rc) {
-+ cpr3_err(vreg, "Unable to read fuse-corner %d quotient offset fuse, rc=%d\n",
-+ i, rc);
-+ return rc;
-+ }
-+ }
-+
-+ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->cpr_boost_fuse_cfg_param,
-+ &fuse->boost_cfg);
-+ if (rc) {
-+ cpr3_err(vreg, "Unable to read CPR boost config fuse, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ cpr3_info(vreg, "Voltage boost fuse config = %llu boost = %s\n",
-+ fuse->boost_cfg, boost_fuse[fuse->boost_cfg]
-+ ? "enable" : "disable");
-+
-+ rc = cpr3_read_fuse_param(base,
-+ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_boost_fuse_volt_param,
-+ &fuse->boost_voltage);
-+ if (rc) {
-+ cpr3_err(vreg, "failed to read boost fuse voltage, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ vreg->fuse_combo = fuse->cpr_fusing_rev + 8 * fuse->speed_bin;
-+ if (vreg->fuse_combo >= CPR4_IPQ807x_APSS_FUSE_COMBO_COUNT) {
-+ cpr3_err(vreg, "invalid CPR fuse combo = %d found\n",
-+ vreg->fuse_combo);
-+ return -EINVAL;
-+ }
-+
-+ vreg->speed_bin_fuse = fuse->speed_bin;
-+ vreg->cpr_rev_fuse = fuse->cpr_fusing_rev;
-+ vreg->fuse_corner_count = g_valid_fuse_count;
-+ vreg->platform_fuses = fuse;
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr4_apss_parse_corner_data() - parse APSS corner data from device tree
-+ * properties of the CPR3 regulator's device node
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_apss_parse_corner_data(struct cpr3_regulator *vreg)
-+{
-+ struct device_node *node = vreg->of_node;
-+ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses;
-+ u32 *temp = NULL;
-+ int i, rc;
-+
-+ rc = cpr3_parse_common_corner_data(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading corner data, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ /* If fuse has incorrect RO Select values and dtsi has "qcom,cpr-ro-sel"
-+ * entry with RO select values other than zero, then dtsi values will
-+ * be used.
-+ */
-+ if (of_find_property(node, "qcom,cpr-ro-sel", NULL)) {
-+ temp = kcalloc(vreg->fuse_corner_count, sizeof(*temp),
-+ GFP_KERNEL);
-+ if (!temp)
-+ return -ENOMEM;
-+
-+ rc = cpr3_parse_array_property(vreg, "qcom,cpr-ro-sel",
-+ vreg->fuse_corner_count, temp);
-+ if (rc)
-+ goto done;
-+
-+ for (i = 0; i < vreg->fuse_corner_count; i++) {
-+ if (temp[i] != 0)
-+ fuse->ro_sel[i] = temp[i];
-+ }
-+ }
-+done:
-+ kfree(temp);
-+ return rc;
-+}
-+
-+/**
-+ * cpr4_apss_parse_misc_fuse_voltage_adjustments() - fill an array from a
-+ * portion of the voltage adjustments specified based on
-+ * miscellaneous fuse bits.
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @volt_adjust: Voltage adjustment output data array which must be
-+ * of size vreg->corner_count
-+ *
-+ * cpr3_parse_common_corner_data() must be called for vreg before this function
-+ * is called so that speed bin size elements are initialized.
-+ *
-+ * Two formats are supported for the device tree property:
-+ * 1. Length == tuple_list_size * vreg->corner_count
-+ * (reading begins at index 0)
-+ * 2. Length == tuple_list_size * vreg->speed_bin_corner_sum
-+ * (reading begins at index tuple_list_size * vreg->speed_bin_offset)
-+ *
-+ * Here, tuple_list_size is the number of possible values for misc fuse.
-+ * All other property lengths are treated as errors.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_apss_parse_misc_fuse_voltage_adjustments(
-+ struct cpr3_regulator *vreg, u32 *volt_adjust)
-+{
-+ struct device_node *node = vreg->of_node;
-+ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses;
-+ int tuple_list_size = IPQ807x_MISC_FUSE_VAL_COUNT;
-+ int i, offset, rc, len = 0;
-+ const char *prop_name = "qcom,cpr-misc-fuse-voltage-adjustment";
-+
-+ if (!of_find_property(node, prop_name, &len)) {
-+ cpr3_err(vreg, "property %s is missing\n", prop_name);
-+ return -EINVAL;
-+ }
-+
-+ if (len == tuple_list_size * vreg->corner_count * sizeof(u32)) {
-+ offset = 0;
-+ } else if (vreg->speed_bin_corner_sum > 0 &&
-+ len == tuple_list_size * vreg->speed_bin_corner_sum
-+ * sizeof(u32)) {
-+ offset = tuple_list_size * vreg->speed_bin_offset
-+ + fuse->misc * vreg->corner_count;
-+ } else {
-+ if (vreg->speed_bin_corner_sum > 0)
-+ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n",
-+ prop_name, len,
-+ tuple_list_size * vreg->corner_count
-+ * sizeof(u32),
-+ tuple_list_size * vreg->speed_bin_corner_sum
-+ * sizeof(u32));
-+ else
-+ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu\n",
-+ prop_name, len,
-+ tuple_list_size * vreg->corner_count
-+ * sizeof(u32));
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ rc = of_property_read_u32_index(node, prop_name, offset + i,
-+ &volt_adjust[i]);
-+ if (rc) {
-+ cpr3_err(vreg, "error reading property %s, rc=%d\n",
-+ prop_name, rc);
-+ return rc;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr4_ipq807x_apss_calculate_open_loop_voltages() - calculate the open-loop
-+ * voltage for each corner of a CPR3 regulator
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * If open-loop voltage interpolation is allowed in device tree, then
-+ * this function calculates the open-loop voltage for a given corner using
-+ * linear interpolation. This interpolation is performed using the processor
-+ * frequencies of the lower and higher Fmax corners along with their fused
-+ * open-loop voltages.
-+ *
-+ * If open-loop voltage interpolation is not allowed, then this function uses
-+ * the Fmax fused open-loop voltage for all of the corners associated with a
-+ * given fuse corner.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_ipq807x_apss_calculate_open_loop_voltages(
-+ struct cpr3_regulator *vreg)
-+{
-+ struct device_node *node = vreg->of_node;
-+ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses;
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ int i, j, rc = 0;
-+ bool allow_interpolation;
-+ u64 freq_low, volt_low, freq_high, volt_high;
-+ int *fuse_volt, *misc_adj_volt;
-+ int *fmax_corner;
-+
-+ fuse_volt = kcalloc(vreg->fuse_corner_count, sizeof(*fuse_volt),
-+ GFP_KERNEL);
-+ fmax_corner = kcalloc(vreg->fuse_corner_count, sizeof(*fmax_corner),
-+ GFP_KERNEL);
-+ if (!fuse_volt || !fmax_corner) {
-+ rc = -ENOMEM;
-+ goto done;
-+ }
-+
-+ for (i = 0; i < vreg->fuse_corner_count; i++) {
-+ if (ctrl->cpr_global_setting == CPR_DISABLED)
-+ fuse_volt[i] = vreg->cpr4_regulator_data->fuse_ref_volt[i];
-+ else
-+ fuse_volt[i] = cpr3_convert_open_loop_voltage_fuse(
-+ vreg->cpr4_regulator_data->fuse_ref_volt[i],
-+ vreg->cpr4_regulator_data->fuse_step_volt,
-+ fuse->init_voltage[i],
-+ IPQ807x_APSS_VOLTAGE_FUSE_SIZE);
-+
-+ /* Log fused open-loop voltage values for debugging purposes. */
-+ cpr3_info(vreg, "fused %8s: open-loop=%7d uV\n",
-+ cpr4_ipq807x_apss_fuse_corner_name[i],
-+ fuse_volt[i]);
-+ }
-+
-+ rc = cpr3_determine_part_type(vreg,
-+ fuse_volt[vreg->fuse_corner_count - 1]);
-+ if (rc) {
-+ cpr3_err(vreg, "fused part type detection failed failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ rc = cpr3_adjust_fused_open_loop_voltages(vreg, fuse_volt);
-+ if (rc) {
-+ cpr3_err(vreg, "fused open-loop voltage adjustment failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ allow_interpolation = of_property_read_bool(node,
-+ "qcom,allow-voltage-interpolation");
-+
-+ for (i = 1; i < vreg->fuse_corner_count; i++) {
-+ if (fuse_volt[i] < fuse_volt[i - 1]) {
-+ cpr3_info(vreg, "fuse corner %d voltage=%d uV < fuse corner %d voltage=%d uV; overriding: fuse corner %d voltage=%d\n",
-+ i, fuse_volt[i], i - 1, fuse_volt[i - 1],
-+ i, fuse_volt[i - 1]);
-+ fuse_volt[i] = fuse_volt[i - 1];
-+ }
-+ }
-+
-+ if (!allow_interpolation) {
-+ /* Use fused open-loop voltage for lower frequencies. */
-+ for (i = 0; i < vreg->corner_count; i++)
-+ vreg->corner[i].open_loop_volt
-+ = fuse_volt[vreg->corner[i].cpr_fuse_corner];
-+ goto done;
-+ }
-+
-+ /* Determine highest corner mapped to each fuse corner */
-+ j = vreg->fuse_corner_count - 1;
-+ for (i = vreg->corner_count - 1; i >= 0; i--) {
-+ if (vreg->corner[i].cpr_fuse_corner == j) {
-+ fmax_corner[j] = i;
-+ j--;
-+ }
-+ }
-+ if (j >= 0) {
-+ cpr3_err(vreg, "invalid fuse corner mapping\n");
-+ rc = -EINVAL;
-+ goto done;
-+ }
-+
-+ /*
-+ * Interpolation is not possible for corners mapped to the lowest fuse
-+ * corner so use the fuse corner value directly.
-+ */
-+ for (i = 0; i <= fmax_corner[0]; i++)
-+ vreg->corner[i].open_loop_volt = fuse_volt[0];
-+
-+ /* Interpolate voltages for the higher fuse corners. */
-+ for (i = 1; i < vreg->fuse_corner_count; i++) {
-+ freq_low = vreg->corner[fmax_corner[i - 1]].proc_freq;
-+ volt_low = fuse_volt[i - 1];
-+ freq_high = vreg->corner[fmax_corner[i]].proc_freq;
-+ volt_high = fuse_volt[i];
-+
-+ for (j = fmax_corner[i - 1] + 1; j <= fmax_corner[i]; j++)
-+ vreg->corner[j].open_loop_volt = cpr3_interpolate(
-+ freq_low, volt_low, freq_high, volt_high,
-+ vreg->corner[j].proc_freq);
-+ }
-+
-+done:
-+ if (rc == 0) {
-+ cpr3_debug(vreg, "unadjusted per-corner open-loop voltages:\n");
-+ for (i = 0; i < vreg->corner_count; i++)
-+ cpr3_debug(vreg, "open-loop[%2d] = %d uV\n", i,
-+ vreg->corner[i].open_loop_volt);
-+
-+ rc = cpr3_adjust_open_loop_voltages(vreg);
-+ if (rc)
-+ cpr3_err(vreg, "open-loop voltage adjustment failed, rc=%d\n",
-+ rc);
-+
-+ if (of_find_property(node,
-+ "qcom,cpr-misc-fuse-voltage-adjustment",
-+ NULL)) {
-+ misc_adj_volt = kcalloc(vreg->corner_count,
-+ sizeof(*misc_adj_volt), GFP_KERNEL);
-+ if (!misc_adj_volt) {
-+ rc = -ENOMEM;
-+ goto _exit;
-+ }
-+
-+ rc = cpr4_apss_parse_misc_fuse_voltage_adjustments(vreg,
-+ misc_adj_volt);
-+ if (rc) {
-+ cpr3_err(vreg, "qcom,cpr-misc-fuse-voltage-adjustment reading failed, rc=%d\n",
-+ rc);
-+ kfree(misc_adj_volt);
-+ goto _exit;
-+ }
-+
-+ for (i = 0; i < vreg->corner_count; i++)
-+ vreg->corner[i].open_loop_volt
-+ += misc_adj_volt[i];
-+ kfree(misc_adj_volt);
-+ }
-+ }
-+
-+_exit:
-+ kfree(fuse_volt);
-+ kfree(fmax_corner);
-+ return rc;
-+}
-+
-+/**
-+ * cpr4_ipq807x_apss_set_no_interpolation_quotients() - use the fused target
-+ * quotient values for lower frequencies.
-+ * @vreg: Pointer to the CPR3 regulator
-+ * @volt_adjust: Pointer to array of per-corner closed-loop adjustment
-+ * voltages
-+ * @volt_adjust_fuse: Pointer to array of per-fuse-corner closed-loop
-+ * adjustment voltages
-+ * @ro_scale: Pointer to array of per-fuse-corner RO scaling factor
-+ * values with units of QUOT/V
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_ipq807x_apss_set_no_interpolation_quotients(
-+ struct cpr3_regulator *vreg, int *volt_adjust,
-+ int *volt_adjust_fuse, int *ro_scale)
-+{
-+ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses;
-+ u32 quot, ro;
-+ int quot_adjust;
-+ int i, fuse_corner;
-+
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ fuse_corner = vreg->corner[i].cpr_fuse_corner;
-+ quot = fuse->target_quot[fuse_corner];
-+ quot_adjust = cpr3_quot_adjustment(ro_scale[fuse_corner],
-+ volt_adjust_fuse[fuse_corner] +
-+ volt_adjust[i]);
-+ ro = fuse->ro_sel[fuse_corner];
-+ vreg->corner[i].target_quot[ro] = quot + quot_adjust;
-+ cpr3_debug(vreg, "corner=%d RO=%u target quot=%u\n",
-+ i, ro, quot);
-+
-+ if (quot_adjust)
-+ cpr3_debug(vreg, "adjusted corner %d RO%u target quot: %u --> %u (%d uV)\n",
-+ i, ro, quot, vreg->corner[i].target_quot[ro],
-+ volt_adjust_fuse[fuse_corner] +
-+ volt_adjust[i]);
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr4_ipq807x_apss_calculate_target_quotients() - calculate the CPR target
-+ * quotient for each corner of a CPR3 regulator
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * If target quotient interpolation is allowed in device tree, then this
-+ * function calculates the target quotient for a given corner using linear
-+ * interpolation. This interpolation is performed using the processor
-+ * frequencies of the lower and higher Fmax corners along with the fused
-+ * target quotient and quotient offset of the higher Fmax corner.
-+ *
-+ * If target quotient interpolation is not allowed, then this function uses
-+ * the Fmax fused target quotient for all of the corners associated with a
-+ * given fuse corner.
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_ipq807x_apss_calculate_target_quotients(
-+ struct cpr3_regulator *vreg)
-+{
-+ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses;
-+ int rc;
-+ bool allow_interpolation;
-+ u64 freq_low, freq_high, prev_quot;
-+ u64 *quot_low;
-+ u64 *quot_high;
-+ u32 quot, ro;
-+ int i, j, fuse_corner, quot_adjust;
-+ int *fmax_corner;
-+ int *volt_adjust, *volt_adjust_fuse, *ro_scale;
-+ int *voltage_adj_misc;
-+
-+ /* Log fused quotient values for debugging purposes. */
-+ for (i = CPR4_IPQ807x_APSS_FUSE_CORNER_SVS;
-+ i < vreg->fuse_corner_count; i++)
-+ cpr3_info(vreg, "fused %8s: quot[%2llu]=%4llu, quot_offset[%2llu]=%4llu\n",
-+ cpr4_ipq807x_apss_fuse_corner_name[i],
-+ fuse->ro_sel[i], fuse->target_quot[i],
-+ fuse->ro_sel[i], fuse->quot_offset[i] *
-+ IPQ807x_APSS_QUOT_OFFSET_SCALE);
-+
-+ allow_interpolation = of_property_read_bool(vreg->of_node,
-+ "qcom,allow-quotient-interpolation");
-+
-+ volt_adjust = kcalloc(vreg->corner_count, sizeof(*volt_adjust),
-+ GFP_KERNEL);
-+ volt_adjust_fuse = kcalloc(vreg->fuse_corner_count,
-+ sizeof(*volt_adjust_fuse), GFP_KERNEL);
-+ ro_scale = kcalloc(vreg->fuse_corner_count, sizeof(*ro_scale),
-+ GFP_KERNEL);
-+ fmax_corner = kcalloc(vreg->fuse_corner_count, sizeof(*fmax_corner),
-+ GFP_KERNEL);
-+ quot_low = kcalloc(vreg->fuse_corner_count, sizeof(*quot_low),
-+ GFP_KERNEL);
-+ quot_high = kcalloc(vreg->fuse_corner_count, sizeof(*quot_high),
-+ GFP_KERNEL);
-+ if (!volt_adjust || !volt_adjust_fuse || !ro_scale ||
-+ !fmax_corner || !quot_low || !quot_high) {
-+ rc = -ENOMEM;
-+ goto done;
-+ }
-+
-+ rc = cpr3_parse_closed_loop_voltage_adjustments(vreg, &fuse->ro_sel[0],
-+ volt_adjust, volt_adjust_fuse, ro_scale);
-+ if (rc) {
-+ cpr3_err(vreg, "could not load closed-loop voltage adjustments, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+
-+ if (of_find_property(vreg->of_node,
-+ "qcom,cpr-misc-fuse-voltage-adjustment", NULL)) {
-+ voltage_adj_misc = kcalloc(vreg->corner_count,
-+ sizeof(*voltage_adj_misc), GFP_KERNEL);
-+ if (!voltage_adj_misc) {
-+ rc = -ENOMEM;
-+ goto done;
-+ }
-+
-+ rc = cpr4_apss_parse_misc_fuse_voltage_adjustments(vreg,
-+ voltage_adj_misc);
-+ if (rc) {
-+ cpr3_err(vreg, "qcom,cpr-misc-fuse-voltage-adjustment reading failed, rc=%d\n",
-+ rc);
-+ kfree(voltage_adj_misc);
-+ goto done;
-+ }
-+
-+ for (i = 0; i < vreg->corner_count; i++)
-+ volt_adjust[i] += voltage_adj_misc[i];
-+
-+ kfree(voltage_adj_misc);
-+ }
-+
-+ if (!allow_interpolation) {
-+ /* Use fused target quotients for lower frequencies. */
-+ return cpr4_ipq807x_apss_set_no_interpolation_quotients(
-+ vreg, volt_adjust, volt_adjust_fuse, ro_scale);
-+ }
-+
-+ /* Determine highest corner mapped to each fuse corner */
-+ j = vreg->fuse_corner_count - 1;
-+ for (i = vreg->corner_count - 1; i >= 0; i--) {
-+ if (vreg->corner[i].cpr_fuse_corner == j) {
-+ fmax_corner[j] = i;
-+ j--;
-+ }
-+ }
-+ if (j >= 0) {
-+ cpr3_err(vreg, "invalid fuse corner mapping\n");
-+ rc = -EINVAL;
-+ goto done;
-+ }
-+
-+ /*
-+ * Interpolation is not possible for corners mapped to the lowest fuse
-+ * corner so use the fuse corner value directly.
-+ */
-+ i = CPR4_IPQ807x_APSS_FUSE_CORNER_SVS;
-+ quot_adjust = cpr3_quot_adjustment(ro_scale[i], volt_adjust_fuse[i]);
-+ quot = fuse->target_quot[i] + quot_adjust;
-+ quot_high[i] = quot_low[i] = quot;
-+ ro = fuse->ro_sel[i];
-+ if (quot_adjust)
-+ cpr3_debug(vreg, "adjusted fuse corner %d RO%u target quot: %llu --> %u (%d uV)\n",
-+ i, ro, fuse->target_quot[i], quot, volt_adjust_fuse[i]);
-+
-+ for (i = 0; i <= fmax_corner[CPR4_IPQ807x_APSS_FUSE_CORNER_SVS];
-+ i++)
-+ vreg->corner[i].target_quot[ro] = quot;
-+
-+ for (i = CPR4_IPQ807x_APSS_FUSE_CORNER_NOM;
-+ i < vreg->fuse_corner_count; i++) {
-+ quot_high[i] = fuse->target_quot[i];
-+ if (fuse->ro_sel[i] == fuse->ro_sel[i - 1])
-+ quot_low[i] = quot_high[i - 1];
-+ else
-+ quot_low[i] = quot_high[i]
-+ - fuse->quot_offset[i]
-+ * IPQ807x_APSS_QUOT_OFFSET_SCALE;
-+ if (quot_high[i] < quot_low[i]) {
-+ cpr3_debug(vreg, "quot_high[%d]=%llu < quot_low[%d]=%llu; overriding: quot_high[%d]=%llu\n",
-+ i, quot_high[i], i, quot_low[i],
-+ i, quot_low[i]);
-+ quot_high[i] = quot_low[i];
-+ }
-+ }
-+
-+ /* Perform per-fuse-corner target quotient adjustment */
-+ for (i = 1; i < vreg->fuse_corner_count; i++) {
-+ quot_adjust = cpr3_quot_adjustment(ro_scale[i],
-+ volt_adjust_fuse[i]);
-+ if (quot_adjust) {
-+ prev_quot = quot_high[i];
-+ quot_high[i] += quot_adjust;
-+ cpr3_debug(vreg, "adjusted fuse corner %d RO%llu target quot: %llu --> %llu (%d uV)\n",
-+ i, fuse->ro_sel[i], prev_quot, quot_high[i],
-+ volt_adjust_fuse[i]);
-+ }
-+
-+ if (fuse->ro_sel[i] == fuse->ro_sel[i - 1])
-+ quot_low[i] = quot_high[i - 1];
-+ else
-+ quot_low[i] += cpr3_quot_adjustment(ro_scale[i],
-+ volt_adjust_fuse[i - 1]);
-+
-+ if (quot_high[i] < quot_low[i]) {
-+ cpr3_debug(vreg, "quot_high[%d]=%llu < quot_low[%d]=%llu after adjustment; overriding: quot_high[%d]=%llu\n",
-+ i, quot_high[i], i, quot_low[i],
-+ i, quot_low[i]);
-+ quot_high[i] = quot_low[i];
-+ }
-+ }
-+
-+ /* Interpolate voltages for the higher fuse corners. */
-+ for (i = 1; i < vreg->fuse_corner_count; i++) {
-+ freq_low = vreg->corner[fmax_corner[i - 1]].proc_freq;
-+ freq_high = vreg->corner[fmax_corner[i]].proc_freq;
-+
-+ ro = fuse->ro_sel[i];
-+ for (j = fmax_corner[i - 1] + 1; j <= fmax_corner[i]; j++)
-+ vreg->corner[j].target_quot[ro] = cpr3_interpolate(
-+ freq_low, quot_low[i], freq_high, quot_high[i],
-+ vreg->corner[j].proc_freq);
-+ }
-+
-+ /* Perform per-corner target quotient adjustment */
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ fuse_corner = vreg->corner[i].cpr_fuse_corner;
-+ ro = fuse->ro_sel[fuse_corner];
-+ quot_adjust = cpr3_quot_adjustment(ro_scale[fuse_corner],
-+ volt_adjust[i]);
-+ if (quot_adjust) {
-+ prev_quot = vreg->corner[i].target_quot[ro];
-+ vreg->corner[i].target_quot[ro] += quot_adjust;
-+ cpr3_debug(vreg, "adjusted corner %d RO%u target quot: %llu --> %u (%d uV)\n",
-+ i, ro, prev_quot,
-+ vreg->corner[i].target_quot[ro],
-+ volt_adjust[i]);
-+ }
-+ }
-+
-+ /* Ensure that target quotients increase monotonically */
-+ for (i = 1; i < vreg->corner_count; i++) {
-+ ro = fuse->ro_sel[vreg->corner[i].cpr_fuse_corner];
-+ if (fuse->ro_sel[vreg->corner[i - 1].cpr_fuse_corner] == ro
-+ && vreg->corner[i].target_quot[ro]
-+ < vreg->corner[i - 1].target_quot[ro]) {
-+ cpr3_debug(vreg, "adjusted corner %d RO%u target quot=%u < adjusted corner %d RO%u target quot=%u; overriding: corner %d RO%u target quot=%u\n",
-+ i, ro, vreg->corner[i].target_quot[ro],
-+ i - 1, ro, vreg->corner[i - 1].target_quot[ro],
-+ i, ro, vreg->corner[i - 1].target_quot[ro]);
-+ vreg->corner[i].target_quot[ro]
-+ = vreg->corner[i - 1].target_quot[ro];
-+ }
-+ }
-+
-+done:
-+ kfree(volt_adjust);
-+ kfree(volt_adjust_fuse);
-+ kfree(ro_scale);
-+ kfree(fmax_corner);
-+ kfree(quot_low);
-+ kfree(quot_high);
-+ return rc;
-+}
-+
-+/**
-+ * cpr4_apss_print_settings() - print out APSS CPR configuration settings into
-+ * the kernel log for debugging purposes
-+ * @vreg: Pointer to the CPR3 regulator
-+ */
-+static void cpr4_apss_print_settings(struct cpr3_regulator *vreg)
-+{
-+ struct cpr3_corner *corner;
-+ int i;
-+
-+ cpr3_debug(vreg, "Corner: Frequency (Hz), Fuse Corner, Floor (uV), Open-Loop (uV), Ceiling (uV)\n");
-+ for (i = 0; i < vreg->corner_count; i++) {
-+ corner = &vreg->corner[i];
-+ cpr3_debug(vreg, "%3d: %10u, %2d, %7d, %7d, %7d\n",
-+ i, corner->proc_freq, corner->cpr_fuse_corner,
-+ corner->floor_volt, corner->open_loop_volt,
-+ corner->ceiling_volt);
-+ }
-+
-+ if (vreg->thread->ctrl->apm)
-+ cpr3_debug(vreg, "APM threshold = %d uV, APM adjust = %d uV\n",
-+ vreg->thread->ctrl->apm_threshold_volt,
-+ vreg->thread->ctrl->apm_adj_volt);
-+}
-+
-+/**
-+ * cpr4_apss_init_thread() - perform steps necessary to initialize the
-+ * configuration data for a CPR3 thread
-+ * @thread: Pointer to the CPR3 thread
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_apss_init_thread(struct cpr3_thread *thread)
-+{
-+ int rc;
-+
-+ rc = cpr3_parse_common_thread_data(thread);
-+ if (rc) {
-+ cpr3_err(thread->ctrl, "thread %u unable to read CPR thread data from device tree, rc=%d\n",
-+ thread->thread_id, rc);
-+ return rc;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * cpr4_apss_parse_temp_adj_properties() - parse temperature based
-+ * adjustment properties from device tree.
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_apss_parse_temp_adj_properties(struct cpr3_controller *ctrl)
-+{
-+ struct device_node *of_node = ctrl->dev->of_node;
-+ int rc, i, len, temp_point_count;
-+
-+ if (!of_find_property(of_node, "qcom,cpr-temp-point-map", &len)) {
-+ /*
-+ * Temperature based adjustments are not defined. Single
-+ * temperature band is still valid for per-online-core
-+ * adjustments.
-+ */
-+ ctrl->temp_band_count = 1;
-+ return 0;
-+ }
-+
-+ temp_point_count = len / sizeof(u32);
-+ if (temp_point_count <= 0 ||
-+ temp_point_count > IPQ807x_APSS_MAX_TEMP_POINTS) {
-+ cpr3_err(ctrl, "invalid number of temperature points %d > %d (max)\n",
-+ temp_point_count, IPQ807x_APSS_MAX_TEMP_POINTS);
-+ return -EINVAL;
-+ }
-+
-+ ctrl->temp_points = devm_kcalloc(ctrl->dev, temp_point_count,
-+ sizeof(*ctrl->temp_points), GFP_KERNEL);
-+ if (!ctrl->temp_points)
-+ return -ENOMEM;
-+
-+ rc = of_property_read_u32_array(of_node, "qcom,cpr-temp-point-map",
-+ ctrl->temp_points, temp_point_count);
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading property qcom,cpr-temp-point-map, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ for (i = 0; i < temp_point_count; i++)
-+ cpr3_debug(ctrl, "Temperature Point %d=%d\n", i,
-+ ctrl->temp_points[i]);
-+
-+ /*
-+ * If t1, t2, and t3 are the temperature points, then the temperature
-+ * bands are: (-inf, t1], (t1, t2], (t2, t3], and (t3, inf).
-+ */
-+ ctrl->temp_band_count = temp_point_count + 1;
-+ cpr3_debug(ctrl, "Number of temp bands =%d\n", ctrl->temp_band_count);
-+
-+ rc = of_property_read_u32(of_node, "qcom,cpr-initial-temp-band",
-+ &ctrl->initial_temp_band);
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading qcom,cpr-initial-temp-band, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ if (ctrl->initial_temp_band >= ctrl->temp_band_count) {
-+ cpr3_err(ctrl, "Initial temperature band value %d should be in range [0 - %d]\n",
-+ ctrl->initial_temp_band, ctrl->temp_band_count - 1);
-+ return -EINVAL;
-+ }
-+
-+ ctrl->temp_sensor_id_start = IPQ807x_APSS_TEMP_SENSOR_ID_START;
-+ ctrl->temp_sensor_id_end = IPQ807x_APSS_TEMP_SENSOR_ID_END;
-+ ctrl->allow_temp_adj = true;
-+ return rc;
-+}
-+
-+/**
-+ * cpr4_apss_parse_boost_properties() - parse configuration data for boost
-+ * voltage adjustment for CPR3 regulator from device tree.
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_apss_parse_boost_properties(struct cpr3_regulator *vreg)
-+{
-+ struct cpr3_controller *ctrl = vreg->thread->ctrl;
-+ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses;
-+ struct cpr3_corner *corner;
-+ int i, boost_voltage, final_boost_volt, rc = 0;
-+ int *boost_table = NULL, *boost_temp_adj = NULL;
-+ int boost_voltage_adjust = 0, boost_num_cores = 0;
-+ u32 boost_allowed = 0;
-+
-+ if (!boost_fuse[fuse->boost_cfg])
-+ /* Voltage boost is disabled in fuse */
-+ return 0;
-+
-+ if (of_find_property(vreg->of_node, "qcom,allow-boost", NULL)) {
-+ rc = cpr3_parse_array_property(vreg, "qcom,allow-boost", 1,
-+ &boost_allowed);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ if (!boost_allowed) {
-+ /* Voltage boost is not enabled for this regulator */
-+ return 0;
-+ }
-+
-+ boost_voltage = cpr3_convert_open_loop_voltage_fuse(
-+ vreg->cpr4_regulator_data->boost_fuse_ref_volt,
-+ vreg->cpr4_regulator_data->fuse_step_volt,
-+ fuse->boost_voltage,
-+ IPQ807x_APSS_VOLTAGE_FUSE_SIZE);
-+
-+ /* Log boost voltage value for debugging purposes. */
-+ cpr3_info(vreg, "Boost open-loop=%7d uV\n", boost_voltage);
-+
-+ if (of_find_property(vreg->of_node,
-+ "qcom,cpr-boost-voltage-fuse-adjustment", NULL)) {
-+ rc = cpr3_parse_array_property(vreg,
-+ "qcom,cpr-boost-voltage-fuse-adjustment",
-+ 1, &boost_voltage_adjust);
-+ if (rc) {
-+ cpr3_err(vreg, "qcom,cpr-boost-voltage-fuse-adjustment reading failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ boost_voltage += boost_voltage_adjust;
-+ /* Log boost voltage value for debugging purposes. */
-+ cpr3_info(vreg, "Adjusted boost open-loop=%7d uV\n",
-+ boost_voltage);
-+ }
-+
-+ /* Limit boost voltage value between ceiling and floor voltage limits */
-+ boost_voltage = min(boost_voltage, vreg->cpr4_regulator_data->boost_ceiling_volt);
-+ boost_voltage = max(boost_voltage, vreg->cpr4_regulator_data->boost_floor_volt);
-+
-+ /*
-+ * The boost feature can only be used for the highest voltage corner.
-+ * Also, keep core-count adjustments disabled when the boost feature
-+ * is enabled.
-+ */
-+ corner = &vreg->corner[vreg->corner_count - 1];
-+ if (!corner->sdelta) {
-+ /*
-+ * If core-count/temp adjustments are not defined, the cpr4
-+ * sdelta for this corner will not be allocated. Allocate it
-+ * here for boost configuration.
-+ */
-+ corner->sdelta = devm_kzalloc(ctrl->dev,
-+ sizeof(*corner->sdelta), GFP_KERNEL);
-+ if (!corner->sdelta)
-+ return -ENOMEM;
-+ }
-+ corner->sdelta->temp_band_count = ctrl->temp_band_count;
-+
-+ rc = of_property_read_u32(vreg->of_node, "qcom,cpr-num-boost-cores",
-+ &boost_num_cores);
-+ if (rc) {
-+ cpr3_err(vreg, "qcom,cpr-num-boost-cores reading failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ if (boost_num_cores <= 0 ||
-+ boost_num_cores > IPQ807x_APSS_CPR_SDELTA_CORE_COUNT) {
-+ cpr3_err(vreg, "Invalid boost number of cores = %d\n",
-+ boost_num_cores);
-+ return -EINVAL;
-+ }
-+ corner->sdelta->boost_num_cores = boost_num_cores;
-+
-+ boost_table = devm_kcalloc(ctrl->dev, corner->sdelta->temp_band_count,
-+ sizeof(*boost_table), GFP_KERNEL);
-+ if (!boost_table)
-+ return -ENOMEM;
-+
-+ if (of_find_property(vreg->of_node,
-+ "qcom,cpr-boost-temp-adjustment", NULL)) {
-+ boost_temp_adj = kcalloc(corner->sdelta->temp_band_count,
-+ sizeof(*boost_temp_adj), GFP_KERNEL);
-+ if (!boost_temp_adj)
-+ return -ENOMEM;
-+
-+ rc = cpr3_parse_array_property(vreg,
-+ "qcom,cpr-boost-temp-adjustment",
-+ corner->sdelta->temp_band_count,
-+ boost_temp_adj);
-+ if (rc) {
-+ cpr3_err(vreg, "qcom,cpr-boost-temp-adjustment reading failed, rc=%d\n",
-+ rc);
-+ goto done;
-+ }
-+ }
-+
-+ for (i = 0; i < corner->sdelta->temp_band_count; i++) {
-+ /* Apply static adjustments to boost voltage */
-+ final_boost_volt = boost_voltage + (boost_temp_adj == NULL
-+ ? 0 : boost_temp_adj[i]);
-+ /*
-+ * Limit final adjusted boost voltage value between ceiling
-+ * and floor voltage limits
-+ */
-+ final_boost_volt = min(final_boost_volt,
-+ vreg->cpr4_regulator_data->boost_ceiling_volt);
-+ final_boost_volt = max(final_boost_volt,
-+ vreg->cpr4_regulator_data->boost_floor_volt);
-+
-+ boost_table[i] = (corner->open_loop_volt - final_boost_volt)
-+ / ctrl->step_volt;
-+ cpr3_debug(vreg, "Adjusted boost voltage margin for temp band %d = %d steps\n",
-+ i, boost_table[i]);
-+ }
-+
-+ corner->ceiling_volt = vreg->cpr4_regulator_data->boost_ceiling_volt;
-+ corner->sdelta->boost_table = boost_table;
-+ corner->sdelta->allow_boost = true;
-+ corner->sdelta->allow_core_count_adj = false;
-+ vreg->allow_boost = true;
-+ ctrl->allow_boost = true;
-+done:
-+ kfree(boost_temp_adj);
-+ return rc;
-+}
-+
-+/**
-+ * cpr4_apss_init_regulator() - perform all steps necessary to initialize the
-+ * configuration data for a CPR3 regulator
-+ * @vreg: Pointer to the CPR3 regulator
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_apss_init_regulator(struct cpr3_regulator *vreg)
-+{
-+ struct cpr4_ipq807x_apss_fuses *fuse;
-+ int rc;
-+
-+ rc = cpr4_ipq807x_apss_read_fuse_data(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to read CPR fuse data, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ fuse = vreg->platform_fuses;
-+
-+ rc = cpr4_apss_parse_corner_data(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to read CPR corner data from device tree, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_mem_acc_init(vreg);
-+ if (rc) {
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(vreg, "unable to initialize mem-acc regulator settings, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = cpr4_ipq807x_apss_calculate_open_loop_voltages(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to calculate open-loop voltages, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_limit_open_loop_voltages(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to limit open-loop voltages, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ cpr3_open_loop_voltage_as_ceiling(vreg);
-+
-+ rc = cpr3_limit_floor_voltages(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to limit floor voltages, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ rc = cpr4_ipq807x_apss_calculate_target_quotients(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to calculate target quotients, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = cpr4_parse_core_count_temp_voltage_adj(vreg, false);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to parse temperature and core count voltage adjustments, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ if (vreg->allow_core_count_adj && (vreg->max_core_count <= 0
-+ || vreg->max_core_count >
-+ IPQ807x_APSS_CPR_SDELTA_CORE_COUNT)) {
-+ cpr3_err(vreg, "qcom,max-core-count has invalid value = %d\n",
-+ vreg->max_core_count);
-+ return -EINVAL;
-+ }
-+
-+ rc = cpr4_apss_parse_boost_properties(vreg);
-+ if (rc) {
-+ cpr3_err(vreg, "unable to parse boost adjustments, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ cpr4_apss_print_settings(vreg);
-+
-+ return rc;
-+}
-+
-+/**
-+ * cpr4_apss_init_controller() - perform APSS CPR4 controller specific
-+ * initializations
-+ * @ctrl: Pointer to the CPR3 controller
-+ *
-+ * Return: 0 on success, errno on failure
-+ */
-+static int cpr4_apss_init_controller(struct cpr3_controller *ctrl)
-+{
-+ int rc;
-+
-+ rc = cpr3_parse_common_ctrl_data(ctrl);
-+ if (rc) {
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "unable to parse common controller data, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = of_property_read_u32(ctrl->dev->of_node,
-+ "qcom,cpr-down-error-step-limit",
-+ &ctrl->down_error_step_limit);
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading qcom,cpr-down-error-step-limit, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = of_property_read_u32(ctrl->dev->of_node,
-+ "qcom,cpr-up-error-step-limit",
-+ &ctrl->up_error_step_limit);
-+ if (rc) {
-+ cpr3_err(ctrl, "error reading qcom,cpr-up-error-step-limit, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ /*
-+ * Use fixed step quotient if specified otherwise use dynamic
-+ * calculated per RO step quotient
-+ */
-+ of_property_read_u32(ctrl->dev->of_node, "qcom,cpr-step-quot-fixed",
-+ &ctrl->step_quot_fixed);
-+ ctrl->use_dynamic_step_quot = ctrl->step_quot_fixed ? false : true;
-+
-+ ctrl->saw_use_unit_mV = of_property_read_bool(ctrl->dev->of_node,
-+ "qcom,cpr-saw-use-unit-mV");
-+
-+ of_property_read_u32(ctrl->dev->of_node,
-+ "qcom,cpr-voltage-settling-time",
-+ &ctrl->voltage_settling_time);
-+
-+ if (of_find_property(ctrl->dev->of_node, "vdd-limit-supply", NULL)) {
-+ ctrl->vdd_limit_regulator =
-+ devm_regulator_get(ctrl->dev, "vdd-limit");
-+ if (IS_ERR(ctrl->vdd_limit_regulator)) {
-+ rc = PTR_ERR(ctrl->vdd_limit_regulator);
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "unable to request vdd-limit regulator, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ }
-+
-+ rc = cpr3_apm_init(ctrl);
-+ if (rc) {
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "unable to initialize APM settings, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = cpr4_apss_parse_temp_adj_properties(ctrl);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to parse temperature adjustment properties, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ ctrl->sensor_count = IPQ807x_APSS_CPR_SENSOR_COUNT;
-+
-+ /*
-+ * APSS only has one thread (0) per controller so the zeroed
-+ * array does not need further modification.
-+ */
-+ ctrl->sensor_owner = devm_kcalloc(ctrl->dev, ctrl->sensor_count,
-+ sizeof(*ctrl->sensor_owner), GFP_KERNEL);
-+ if (!ctrl->sensor_owner)
-+ return -ENOMEM;
-+
-+ ctrl->ctrl_type = CPR_CTRL_TYPE_CPR4;
-+ ctrl->supports_hw_closed_loop = false;
-+ ctrl->use_hw_closed_loop = of_property_read_bool(ctrl->dev->of_node,
-+ "qcom,cpr-hw-closed-loop");
-+ return 0;
-+}
-+
-+static int cpr4_apss_regulator_suspend(struct platform_device *pdev,
-+ pm_message_t state)
-+{
-+ struct cpr3_controller *ctrl = platform_get_drvdata(pdev);
-+
-+ return cpr3_regulator_suspend(ctrl);
-+}
-+
-+static int cpr4_apss_regulator_resume(struct platform_device *pdev)
-+{
-+ struct cpr3_controller *ctrl = platform_get_drvdata(pdev);
-+
-+ return cpr3_regulator_resume(ctrl);
-+}
-+
-+static void ipq6018_set_mem_acc(struct regulator_dev *rdev)
-+{
-+ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev);
-+
-+ ipq6018_mem_acc_tcsr[0].ioremap_addr =
-+ ioremap(ipq6018_mem_acc_tcsr[0].phy_addr, 0x4);
-+ ipq6018_mem_acc_tcsr[1].ioremap_addr =
-+ ioremap(ipq6018_mem_acc_tcsr[1].phy_addr, 0x4);
-+
-+ if ((ipq6018_mem_acc_tcsr[0].ioremap_addr != NULL) &&
-+ (ipq6018_mem_acc_tcsr[1].ioremap_addr != NULL) &&
-+ (vreg->current_corner == (vreg->corner_count - CPR3_CORNER_OFFSET))) {
-+
-+ writel_relaxed(ipq6018_mem_acc_tcsr[0].value,
-+ ipq6018_mem_acc_tcsr[0].ioremap_addr);
-+ writel_relaxed(ipq6018_mem_acc_tcsr[1].value,
-+ ipq6018_mem_acc_tcsr[1].ioremap_addr);
-+ }
-+}
-+
-+static void ipq6018_clr_mem_acc(struct regulator_dev *rdev)
-+{
-+ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev);
-+
-+ if ((ipq6018_mem_acc_tcsr[0].ioremap_addr != NULL) &&
-+ (ipq6018_mem_acc_tcsr[1].ioremap_addr != NULL) &&
-+ (vreg->current_corner != vreg->corner_count - CPR3_CORNER_OFFSET)) {
-+ writel_relaxed(0x0, ipq6018_mem_acc_tcsr[0].ioremap_addr);
-+ writel_relaxed(0x0, ipq6018_mem_acc_tcsr[1].ioremap_addr);
-+ }
-+
-+ iounmap(ipq6018_mem_acc_tcsr[0].ioremap_addr);
-+ iounmap(ipq6018_mem_acc_tcsr[1].ioremap_addr);
-+}
-+
-+static struct cpr4_mem_acc_func ipq6018_mem_acc_funcs = {
-+ .set_mem_acc = ipq6018_set_mem_acc,
-+ .clear_mem_acc = ipq6018_clr_mem_acc
-+};
-+
-+static const struct cpr4_reg_data ipq807x_cpr_apss = {
-+ .cpr_valid_fuse_count = IPQ807x_APSS_FUSE_CORNERS,
-+ .fuse_ref_volt = ipq807x_apss_fuse_ref_volt,
-+ .fuse_step_volt = IPQ807x_APSS_FUSE_STEP_VOLT,
-+ .cpr_clk_rate = IPQ807x_APSS_CPR_CLOCK_RATE,
-+ .boost_fuse_ref_volt= IPQ807x_APSS_BOOST_FUSE_REF_VOLT,
-+ .boost_ceiling_volt= IPQ807x_APSS_BOOST_CEILING_VOLT,
-+ .boost_floor_volt= IPQ807x_APSS_BOOST_FLOOR_VOLT,
-+ .cpr3_fuse_params = &ipq807x_fuse_params,
-+ .mem_acc_funcs = NULL,
-+};
-+
-+static const struct cpr4_reg_data ipq817x_cpr_apss = {
-+ .cpr_valid_fuse_count = IPQ817x_APPS_FUSE_CORNERS,
-+ .fuse_ref_volt = ipq807x_apss_fuse_ref_volt,
-+ .fuse_step_volt = IPQ807x_APSS_FUSE_STEP_VOLT,
-+ .cpr_clk_rate = IPQ807x_APSS_CPR_CLOCK_RATE,
-+ .boost_fuse_ref_volt= IPQ807x_APSS_BOOST_FUSE_REF_VOLT,
-+ .boost_ceiling_volt= IPQ807x_APSS_BOOST_CEILING_VOLT,
-+ .boost_floor_volt= IPQ807x_APSS_BOOST_FLOOR_VOLT,
-+ .cpr3_fuse_params = &ipq807x_fuse_params,
-+ .mem_acc_funcs = NULL,
-+};
-+
-+static const struct cpr4_reg_data ipq6018_cpr_apss = {
-+ .cpr_valid_fuse_count = IPQ6018_APSS_FUSE_CORNERS,
-+ .fuse_ref_volt = ipq6018_apss_fuse_ref_volt,
-+ .fuse_step_volt = IPQ6018_APSS_FUSE_STEP_VOLT,
-+ .cpr_clk_rate = IPQ6018_APSS_CPR_CLOCK_RATE,
-+ .boost_fuse_ref_volt = IPQ6018_APSS_BOOST_FUSE_REF_VOLT,
-+ .boost_ceiling_volt = IPQ6018_APSS_BOOST_CEILING_VOLT,
-+ .boost_floor_volt = IPQ6018_APSS_BOOST_FLOOR_VOLT,
-+ .cpr3_fuse_params = &ipq6018_fuse_params,
-+ .mem_acc_funcs = &ipq6018_mem_acc_funcs,
-+};
-+
-+static const struct cpr4_reg_data ipq9574_cpr_apss = {
-+ .cpr_valid_fuse_count = IPQ9574_APSS_FUSE_CORNERS,
-+ .fuse_ref_volt = ipq9574_apss_fuse_ref_volt,
-+ .fuse_step_volt = IPQ9574_APSS_FUSE_STEP_VOLT,
-+ .cpr_clk_rate = IPQ6018_APSS_CPR_CLOCK_RATE,
-+ .boost_fuse_ref_volt = IPQ6018_APSS_BOOST_FUSE_REF_VOLT,
-+ .boost_ceiling_volt = IPQ6018_APSS_BOOST_CEILING_VOLT,
-+ .boost_floor_volt = IPQ6018_APSS_BOOST_FLOOR_VOLT,
-+ .cpr3_fuse_params = &ipq9574_fuse_params,
-+ .mem_acc_funcs = NULL,
-+};
-+
-+static struct of_device_id cpr4_regulator_match_table[] = {
-+ {
-+ .compatible = "qcom,cpr4-ipq807x-apss-regulator",
-+ .data = &ipq807x_cpr_apss
-+ },
-+ {
-+ .compatible = "qcom,cpr4-ipq817x-apss-regulator",
-+ .data = &ipq817x_cpr_apss
-+ },
-+ {
-+ .compatible = "qcom,cpr4-ipq6018-apss-regulator",
-+ .data = &ipq6018_cpr_apss
-+ },
-+ {
-+ .compatible = "qcom,cpr4-ipq9574-apss-regulator",
-+ .data = &ipq9574_cpr_apss
-+ },
-+ {}
-+};
-+
-+static int cpr4_apss_regulator_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct cpr3_controller *ctrl;
-+ const struct of_device_id *match;
-+ struct cpr4_reg_data *cpr_data;
-+ int i, rc;
-+
-+ if (!dev->of_node) {
-+ dev_err(dev, "Device tree node is missing\n");
-+ return -EINVAL;
-+ }
-+
-+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
-+ if (!ctrl)
-+ return -ENOMEM;
-+
-+ match = of_match_device(cpr4_regulator_match_table, &pdev->dev);
-+ if (!match)
-+ return -ENODEV;
-+
-+ cpr_data = (struct cpr4_reg_data *)match->data;
-+ g_valid_fuse_count = cpr_data->cpr_valid_fuse_count;
-+ dev_info(dev, "CPR valid fuse count: %d\n", g_valid_fuse_count);
-+ ctrl->cpr_clock_rate = cpr_data->cpr_clk_rate;
-+
-+ ctrl->dev = dev;
-+ /* Set to false later if anything precludes CPR operation. */
-+ ctrl->cpr_allowed_hw = true;
-+
-+ rc = of_property_read_string(dev->of_node, "qcom,cpr-ctrl-name",
-+ &ctrl->name);
-+ if (rc) {
-+ cpr3_err(ctrl, "unable to read qcom,cpr-ctrl-name, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = cpr3_map_fuse_base(ctrl, pdev);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not map fuse base address\n");
-+ return rc;
-+ }
-+
-+ rc = cpr3_read_tcsr_setting(ctrl, pdev, IPQ807x_APSS_CPR_TCSR_START,
-+ IPQ807x_APSS_CPR_TCSR_END);
-+ if (rc) {
-+ cpr3_err(ctrl, "could not read CPR tcsr setting\n");
-+ return rc;
-+ }
-+
-+ rc = cpr3_allocate_threads(ctrl, 0, 0);
-+ if (rc) {
-+ cpr3_err(ctrl, "failed to allocate CPR thread array, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ if (ctrl->thread_count != 1) {
-+ cpr3_err(ctrl, "expected 1 thread but found %d\n",
-+ ctrl->thread_count);
-+ return -EINVAL;
-+ }
-+
-+ rc = cpr4_apss_init_controller(ctrl);
-+ if (rc) {
-+ if (rc != -EPROBE_DEFER)
-+ cpr3_err(ctrl, "failed to initialize CPR controller parameters, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+
-+ rc = cpr4_apss_init_thread(&ctrl->thread[0]);
-+ if (rc) {
-+ cpr3_err(ctrl, "thread initialization failed, rc=%d\n", rc);
-+ return rc;
-+ }
-+
-+ for (i = 0; i < ctrl->thread[0].vreg_count; i++) {
-+ ctrl->thread[0].vreg[i].cpr4_regulator_data = cpr_data;
-+ rc = cpr4_apss_init_regulator(&ctrl->thread[0].vreg[i]);
-+ if (rc) {
-+ cpr3_err(&ctrl->thread[0].vreg[i], "regulator initialization failed, rc=%d\n",
-+ rc);
-+ return rc;
-+ }
-+ }
-+
-+ platform_set_drvdata(pdev, ctrl);
-+
-+ return cpr3_regulator_register(pdev, ctrl);
-+}
-+
-+static int cpr4_apss_regulator_remove(struct platform_device *pdev)
-+{
-+ struct cpr3_controller *ctrl = platform_get_drvdata(pdev);
-+
-+ return cpr3_regulator_unregister(ctrl);
-+}
-+
-+static struct platform_driver cpr4_apss_regulator_driver = {
-+ .driver = {
-+ .name = "qcom,cpr4-apss-regulator",
-+ .of_match_table = cpr4_regulator_match_table,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = cpr4_apss_regulator_probe,
-+ .remove = cpr4_apss_regulator_remove,
-+ .suspend = cpr4_apss_regulator_suspend,
-+ .resume = cpr4_apss_regulator_resume,
-+};
-+
-+static int cpr4_regulator_init(void)
-+{
-+ return platform_driver_register(&cpr4_apss_regulator_driver);
-+}
-+
-+static void cpr4_regulator_exit(void)
-+{
-+ platform_driver_unregister(&cpr4_apss_regulator_driver);
-+}
-+
-+MODULE_DESCRIPTION("CPR4 APSS regulator driver");
-+MODULE_LICENSE("GPL v2");
-+
-+arch_initcall(cpr4_regulator_init);
-+module_exit(cpr4_regulator_exit);
---- /dev/null
-+++ b/include/soc/qcom/socinfo.h
-@@ -0,0 +1,463 @@
-+/* Copyright (c) 2009-2014, 2016, 2020, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#ifndef _ARCH_ARM_MACH_MSM_SOCINFO_H_
-+#define _ARCH_ARM_MACH_MSM_SOCINFO_H_
-+
-+#include <linux/of.h>
-+
-+#define CPU_IPQ8074 323
-+#define CPU_IPQ8072 342
-+#define CPU_IPQ8076 343
-+#define CPU_IPQ8078 344
-+#define CPU_IPQ8070 375
-+#define CPU_IPQ8071 376
-+
-+#define CPU_IPQ8072A 389
-+#define CPU_IPQ8074A 390
-+#define CPU_IPQ8076A 391
-+#define CPU_IPQ8078A 392
-+#define CPU_IPQ8070A 395
-+#define CPU_IPQ8071A 396
-+
-+#define CPU_IPQ8172 397
-+#define CPU_IPQ8173 398
-+#define CPU_IPQ8174 399
-+
-+#define CPU_IPQ6018 402
-+#define CPU_IPQ6028 403
-+#define CPU_IPQ6000 421
-+#define CPU_IPQ6010 422
-+#define CPU_IPQ6005 453
-+
-+#define CPU_IPQ5010 446
-+#define CPU_IPQ5018 447
-+#define CPU_IPQ5028 448
-+#define CPU_IPQ5000 503
-+#define CPU_IPQ0509 504
-+#define CPU_IPQ0518 505
-+
-+#define CPU_IPQ9514 510
-+#define CPU_IPQ9554 512
-+#define CPU_IPQ9570 513
-+#define CPU_IPQ9574 514
-+#define CPU_IPQ9550 511
-+#define CPU_IPQ9510 521
-+
-+static inline int read_ipq_soc_version_major(void)
-+{
-+ const int *prop;
-+ prop = of_get_property(of_find_node_by_path("/"), "soc_version_major",
-+ NULL);
-+
-+ if (!prop)
-+ return -EINVAL;
-+
-+ return le32_to_cpu(*prop);
-+}
-+
-+static inline int read_ipq_cpu_type(void)
-+{
-+ const int *prop;
-+ prop = of_get_property(of_find_node_by_path("/"), "cpu_type", NULL);
-+ /*
-+ * Return Default CPU type if "cpu_type" property is not found in DTSI
-+ */
-+ if (!prop)
-+ return CPU_IPQ8074;
-+
-+ return le32_to_cpu(*prop);
-+}
-+
-+static inline int cpu_is_ipq8070(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8070;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8071(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8071;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8072(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8072;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8074(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8074;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8076(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8076;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8078(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8078;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8072a(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8072A;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8074a(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8074A;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8076a(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8076A;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8078a(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8078A;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8070a(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8070A;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8071a(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8071A;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8172(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8172;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8173(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8173;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq8174(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ8174;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq6018(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ6018;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq6028(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ6028;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq6000(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ6000;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq6010(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ6010;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq6005(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ6005;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq5010(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ5010;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq5018(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ5018;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq5028(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ5028;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq5000(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ5000;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq0509(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ0509;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq0518(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ0518;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq9514(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ9514;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq9554(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ9554;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq9570(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ9570;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq9574(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ9574;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq9550(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ9550;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq9510(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return read_ipq_cpu_type() == CPU_IPQ9510;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq807x(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return cpu_is_ipq8072() || cpu_is_ipq8074() ||
-+ cpu_is_ipq8076() || cpu_is_ipq8078() ||
-+ cpu_is_ipq8070() || cpu_is_ipq8071() ||
-+ cpu_is_ipq8072a() || cpu_is_ipq8074a() ||
-+ cpu_is_ipq8076a() || cpu_is_ipq8078a() ||
-+ cpu_is_ipq8070a() || cpu_is_ipq8071a() ||
-+ cpu_is_ipq8172() || cpu_is_ipq8173() ||
-+ cpu_is_ipq8174();
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq60xx(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return cpu_is_ipq6018() || cpu_is_ipq6028() ||
-+ cpu_is_ipq6000() || cpu_is_ipq6010() ||
-+ cpu_is_ipq6005();
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq50xx(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return cpu_is_ipq5010() || cpu_is_ipq5018() ||
-+ cpu_is_ipq5028() || cpu_is_ipq5000() ||
-+ cpu_is_ipq0509() || cpu_is_ipq0518();
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_ipq95xx(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return cpu_is_ipq9514() || cpu_is_ipq9554() ||
-+ cpu_is_ipq9570() || cpu_is_ipq9574() ||
-+ cpu_is_ipq9550() || cpu_is_ipq9510();
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_nss_crypto_enabled(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return cpu_is_ipq807x() || cpu_is_ipq60xx() ||
-+ cpu_is_ipq50xx() || cpu_is_ipq9570() ||
-+ cpu_is_ipq9550() || cpu_is_ipq9574() ||
-+ cpu_is_ipq9554();
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_internal_wifi_enabled(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return cpu_is_ipq807x() || cpu_is_ipq60xx() ||
-+ cpu_is_ipq50xx() || cpu_is_ipq9514() ||
-+ cpu_is_ipq9554() || cpu_is_ipq9574();
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_uniphy1_enabled(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return cpu_is_ipq807x() || cpu_is_ipq60xx() ||
-+ cpu_is_ipq9554() || cpu_is_ipq9570() ||
-+ cpu_is_ipq9574() || cpu_is_ipq9550();
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline int cpu_is_uniphy2_enabled(void)
-+{
-+#ifdef CONFIG_ARCH_QCOM
-+ return cpu_is_ipq807x() || cpu_is_ipq9570() ||
-+ cpu_is_ipq9574();
-+#else
-+ return 0;
-+#endif
-+}
-+
-+#endif /* _ARCH_ARM_MACH_MSM_SOCINFO_H_ */
diff --git a/target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch b/target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch
deleted file mode 100644
index 9b8b4df12b..0000000000
--- a/target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 6baf7e4abcea6f7ac21eccf072a20078b39d064c Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 9 Feb 2022 23:13:26 +0100
-Subject: [PATCH] arm64: dts: ipq8074: add label to clocks
-
-Add label to clocks node as that makes it easy to add the NSS fixed
-clocks that are required in their DTSI.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -15,7 +15,7 @@
- compatible = "qcom,ipq8074";
- interrupt-parent = <&intc>;
-
-- clocks {
-+ clocks: clocks {
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
--
2.34.1
Reference in New Issue View Git Blame Copy Permalink