mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-10-29 09:32:34 +00:00
f39339564a
1. porting MorseMicro HaLow driver to support HaLow on EAP112 2. Only support FCC regulation because of hardware limitation 3. Add /etc/init.d/halow-gpio-reset to initialize HaLow chip in early stage 4. Add /etc/uci-defaults/aaa-fix-phy0-to-morse to correct the default uci for HaLow radio. Signed-off-by: Ian Chen <ian77_chen@accton.com>
140 lines
3.3 KiB
Bash
Executable File
140 lines
3.3 KiB
Bash
Executable File
#!/bin/sh
|
|
|
|
# This script is copied and modified from
|
|
# package/kernel/mac80211/files/lib/wifi/mac80211.sh
|
|
# and modified (simplified) to work with morse devices.
|
|
|
|
append DRIVERS "morse"
|
|
|
|
# Find and set $phy for this $device (a wifi-device section name)
|
|
lookup_phy() {
|
|
[ -n "$phy" ] && {
|
|
[ -d /sys/class/ieee80211/$phy ] && return
|
|
}
|
|
|
|
local devpath
|
|
config_get devpath "$device" path
|
|
[ -n "$devpath" ] && {
|
|
phy="$(iwinfo dot11ah phyname "path=$devpath")"
|
|
[ -n "$phy" ] && return
|
|
}
|
|
|
|
local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
|
|
[ -n "$macaddr" ] && {
|
|
for _phy in /sys/class/ieee80211/*; do
|
|
[ -e "$_phy" ] || continue
|
|
|
|
[ "$macaddr" = "$(cat ${_phy}/macaddress)" ] || continue
|
|
phy="${_phy##*/}"
|
|
return
|
|
done
|
|
}
|
|
phy=
|
|
return
|
|
}
|
|
|
|
# Find and save the phy and macaddr for this $device (a wifi-device section name)
|
|
find_morse_phy() {
|
|
local device="$1"
|
|
|
|
config_get phy "$device" phy
|
|
lookup_phy
|
|
[ -n "$phy" -a -d "/sys/class/ieee80211/$phy" ] || {
|
|
echo "PHY for wifi device $1 not found"
|
|
return 1
|
|
}
|
|
config_set "$device" phy "$phy"
|
|
|
|
config_get macaddr "$device" macaddr
|
|
[ -z "$macaddr" ] && {
|
|
config_set "$device" macaddr "$(cat /sys/class/ieee80211/${phy}/macaddress)"
|
|
}
|
|
|
|
return 0
|
|
}
|
|
|
|
# Set found=1 if the $phy for this $device (a wifi-device section name) is the same as $dev
|
|
check_morse_device() {
|
|
config_get phy "$1" phy
|
|
[ -z "$phy" ] && {
|
|
find_morse_phy "$1" >/dev/null || return 0
|
|
config_get phy "$1" phy
|
|
}
|
|
[ "$phy" = "$dev" ] && found=1
|
|
}
|
|
|
|
detect_morse() {
|
|
devidx=0
|
|
config_load wireless
|
|
while :; do
|
|
config_get type "radio$devidx" type
|
|
[ -n "$type" ] || break
|
|
devidx=$(($devidx + 1))
|
|
done
|
|
|
|
for _dev in /sys/class/ieee80211/*; do
|
|
[ -e "$_dev" ] || continue
|
|
|
|
# Only configure morse devices.
|
|
basename "$(readlink -f "$_dev/device/driver/")" | grep '^morse_' || continue
|
|
|
|
dev="${_dev##*/}"
|
|
|
|
# Skip already configured devices.
|
|
# The path or macaddr are used to find the corresponding phy.
|
|
found=0
|
|
config_foreach check_morse_device wifi-device
|
|
[ "$found" -gt 0 ] && continue
|
|
|
|
path="$(iwinfo dot11ah path "$dev")"
|
|
if [ -n "$path" ]; then
|
|
dev_id="set wireless.radio${devidx}.path='$path'"
|
|
else
|
|
dev_id="set wireless.radio${devidx}.macaddr=$(cat /sys/class/ieee80211/${dev}/macaddress)"
|
|
fi
|
|
|
|
uci -q batch <<-EOF
|
|
set wireless.radio${devidx}=wifi-device
|
|
set wireless.radio${devidx}.type=morse
|
|
${dev_id}
|
|
set wireless.radio${devidx}.band=s1g
|
|
set wireless.radio${devidx}.hwmode=11ah
|
|
set wireless.radio${devidx}.reconf=0
|
|
set wireless.radio${devidx}.disabled=1
|
|
|
|
set wireless.default_radio${devidx}=wifi-iface
|
|
set wireless.default_radio${devidx}.mode=ap
|
|
set wireless.default_radio${devidx}.wds=1
|
|
set wireless.default_radio${devidx}.device=radio${devidx}
|
|
set wireless.default_radio${devidx}.network=lan
|
|
set wireless.default_radio${devidx}.ssid=MorseMicro
|
|
set wireless.default_radio${devidx}.encryption=sae
|
|
set wireless.default_radio${devidx}.key=12345678
|
|
EOF
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
morse,ekh01-03 |\
|
|
morse,ekh03v3)
|
|
bcf=bcf_mf08551.bin
|
|
;;
|
|
morse,ekh01v1)
|
|
bcf=bcf_mf03120.bin
|
|
;;
|
|
morse,ekh01v2)
|
|
bcf=bcf_mf08251.bin
|
|
;;
|
|
morse,ekh04v4)
|
|
bcf=bcf_ekh04_v4.bin
|
|
;;
|
|
esac
|
|
|
|
[ -n "${bcf}" ] && uci -q set wireless.radio${devidx}.bcf="${bcf}"
|
|
|
|
uci -q commit wireless
|
|
|
|
devidx=$(($devidx + 1))
|
|
done
|
|
}
|