mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-10-29 09:32:34 +00:00
324df56861
Specifications are: * CPU: Qualcomm IPQ5018 * RAM: 512 MB * Storage: 16MB ROR, 128MB NAND-optional. * Ethernet: 2x GBe * UART header * WLAN: QCN6122 + QCN8080 * 3x LED-s Installation instructions: Connect to UART, pins are like this (from the edge on LEDS): -> GND | RX | TX | GND | VCC Settings are 115200 8n1 1. Copy openwrt-ipq807x-liteon_wpx8324-squashfs-nand-factory.bin (attached) onto the board into /tmp/ 2. At board's command prompt, issue sysupgrade -n /tmp/openwrt-ipq807x-liteon_wpx8324-squashfs-nand-factory.bin Fixes: WIFI-10929 Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
58 lines
1.9 KiB
Makefile
58 lines
1.9 KiB
Makefile
KERNEL_LOADADDR := 0x41208000
|
|
|
|
define Device/cybertan_eww622_a1
|
|
DEVICE_TITLE := CyberTan EWW622-A1
|
|
DEVICE_DTS := qcom-ipq5018-eww622-a1
|
|
SUPPORTED_DEVICES := cybertan,eww622-a1
|
|
DEVICE_PACKAGES := ath11k-wifi-cybertan-eww622-a1 ath11k-firmware-ipq50xx ath11k-firmware-qcn9000
|
|
DEVICE_DTS_CONFIG := config@mp03.1
|
|
endef
|
|
TARGET_DEVICES += cybertan_eww622_a1
|
|
|
|
define Device/edgecore_eap104
|
|
DEVICE_TITLE := EdgeCore EAP104
|
|
DEVICE_DTS := qcom-ipq5018-eap104
|
|
SUPPORTED_DEVICES := edgecore,eap104
|
|
DEVICE_PACKAGES := ath11k-wifi-edgecore-eap104 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
|
|
DEVICE_DTS_CONFIG := config@mp03.5-c1
|
|
endef
|
|
TARGET_DEVICES += edgecore_eap104
|
|
|
|
define Device/liteon_wpx8324
|
|
DEVICE_TITLE := Liteon WPX8324
|
|
DEVICE_DTS := qcom-ipq5018-liteon-wpx8324
|
|
SUPPORTED_DEVICES := liteon,wpx8324
|
|
DEVICE_PACKAGES := ath11k-wifi-liteon-wpx8324 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
|
|
DEVICE_DTS_CONFIG := config@mp03.5-c1
|
|
endef
|
|
TARGET_DEVICES += liteon_wpx8324
|
|
|
|
define Device/motorola_q14
|
|
DEVICE_TITLE := Motorola Q14
|
|
DEVICE_DTS := qcom-ipq5018-q14
|
|
SUPPORTED_DEVICES := motorola,q14
|
|
DEVICE_PACKAGES := ath11k-wifi-motorola-q14 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
|
|
DEVICE_DTS_CONFIG := config@mp03.5-c1
|
|
IMAGES := sysupgrade.tar mmc-factory.bin
|
|
IMAGE/mmc-factory.bin := append-ubi | qsdk-ipq-factory-mmc
|
|
endef
|
|
TARGET_DEVICES += motorola_q14
|
|
|
|
define Device/qcom_mp03_1
|
|
DEVICE_TITLE := Qualcomm Maple 03.1
|
|
DEVICE_DTS := qcom-ipq5018-mp03.1
|
|
SUPPORTED_DEVICES := qcom,ipq5018-mp03.1
|
|
DEVICE_PACKAGES := ath11k-wifi-qcom-ipq5018
|
|
DEVICE_DTS_CONFIG := config@mp03.1
|
|
endef
|
|
TARGET_DEVICES += qcom_mp03_1
|
|
|
|
define Device/qcom_mp03_3
|
|
DEVICE_TITLE := Qualcomm Maple 03.3
|
|
DEVICE_DTS := qcom-ipq5018-mp03.3
|
|
SUPPORTED_DEVICES := qcom,ipq5018-mp03.3
|
|
DEVICE_PACKAGES := ath11k-wifi-qcom-ipq5018
|
|
DEVICE_DTS_CONFIG := config@mp03.3
|
|
endef
|
|
TARGET_DEVICES += qcom_mp03_3
|