Files
wlan-ap/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh
Shubham Vishwakarma 6ed93db422 ipq5018: add support for indio um-335ax
**Specifications:**
SOC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
Flash: SPI NOR 8MB (Winbond W25Q64DW) + NAND 128MB (Winbond W25N01GWZEIG)
Memory: 512MB DDR3L
Standard: 802.11ax/ac/b/g/n
2.4G Frequency: 2.4GHz - 2.484GHz
2.4G Wi-Fi standard: 802.11b/g/n/ax
5G Chipset: QCN9074
5G Frequency: 5.150GHz~5.850GHz
5G Wi-Fi Standard: 802.11 a/n/ac/ax
Buttons: 1 * Reset button, press 10 seconds to revert to default setting
2.4G Antenna: 2*2.4GHz/5.8GHz dual band antenna: 4dBi
5G Antenna: 2*5.8G antenna: 4dBi
Data Rate: 2.4GHz: 574Mbps, 5GHz:4800Mbps
Power: PoE 802.3at,DC2.0 12V/2A
Max Power Consumption: < 22W
LED Light: WAN, LAN, tricolor LED(sys-red, 2.4G-green, 5.8G-blue)

**BACKUP YOUR STOCK FIRMWARE:**
- Put openwrt-*-initramfs-kernel.bin to your TFTP server and rename it to initramfs.bin
- Enable serial console and enter to u-boot cli and exec these commands:
	```
	tftpboot <your_tftp_server_ip>:initramfs.bin
	bootm
	```
- Once boot completed and you get the openwrt shell execute below commands:
	```
	device=um335ax
	mkdir -p /tmp/fw_backup; cd /tmp/fw_backup
	rootfs=$(cat /proc/mtd | grep \"rootfs\" | cut -d: -f1)
	rootfs_1=$(cat /proc/mtd | grep \"rootfs_1\" | cut -d: -f1)
	dd if=/dev/${rootfs} of=rootfs_${rootfs} bs=1M
	dd if=/dev/${rootfs_1} of=rootfs_1_${rootfs_1} bs=1M
	cp /sys/firmware/fdt fdt.dtb
	md5sum * > md5sum
	tar -cvzf /tmp/${device}.tar.gz .
	sum=$(md5sum /tmp/${device}.tar.gz | cut -d' ' -f1)
	mv /tmp/${device}.tar.gz /tmp/${device}_${sum}.tar.gz
	echo "stock fw backup saved to: /tmp/${device}_${sum}.tar.gz"
	```
- Upload/save your backup to a safe place.

**STOCK FIRMWARE RECOVERY:**
- Boot initramfs image
- Upload your backed-up stock fw tarball to the device
	using scp or download it from the device using wget.
- Enter device ssh cli or tty and exec:
	```
	cd /tmp && wget <your_web_server_ip>/${stock_fw_backup}.tar.gz`
	tar -xpzf ${stock_fw_backup}.tar.gz
	rootfs=$(cat /proc/mtd | grep \"rootfs\" | cut -d: -f1)
	rootfs_1=$(cat /proc/mtd | grep \"rootfs_1\" | cut -d: -f1)
	ubiformat /dev/${rootfs} -y -f /tmp/rootfs_${rootfs}
	ubiformat /dev/${rootfs_1} -y -f /tmp/rootfs_1_${rootfs_1}
	reboot
	```

**INSTALLATION:**
1. initramfs method
- Put openwrt-*-initramfs-kernel.bin to your TFTP server and rename it to initramfs.bin
- Enable serial console and enter to u-boot cli and exec these commands:
	```
	tftpboot <your_tftp_server_ip>:initramfs.bin
	bootm
	```
- Once boot completed and you get the openwrt shell execute below commands:
	```
	cd /tmp && wget <your_web_server_ip>/factory.ubi`
	export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1)
	export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1)
	ubiformat /dev/${rootfs} -y -f factory.ubi
	ubiformat /dev/${rootfs_1} -y -f factory.ubi
	reboot
	```

2. u-boot nand-factory.bin image method
- Put openwrt-*-squashfs-nand-factory.bin to your TFTP server and enter u-boot cli and exec these commands:
	```
	tftpboot <your_tftp_server_ip>:factory.bin
	#After downloading is finished:
	imxtract 0x44000000 ubi
	flash rootfs
	flash rootfs_1
	reset
	```

Signed-off-by: Shubham Vishwakarma <shubhamvis98@fossfrog.in>
2025-09-24 12:51:18 +02:00

189 lines
3.9 KiB
Bash
Executable File

. /lib/functions/system.sh
RAMFS_COPY_BIN='fw_setenv'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock /tmp/downgrade'
qca_do_upgrade() {
local tar_file="$1"
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
local dev=$(find_mtd_chardev "0:HLOS")
tar Oxf $tar_file ${board_dir}/kernel | mtd write - ${dev}
if [ -n "$UPGRADE_BACKUP" ]; then
tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
else
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
fi
}
find_mmc_part() {
local DEVNAME PARTNAME
if grep -q "$1" /proc/mtd; then
echo "" && return 0
fi
for DEVNAME in /sys/block/mmcblk*/mmcblk*p*; do
PARTNAME=$(grep PARTNAME ${DEVNAME}/uevent | cut -f2 -d'=')
[ "$PARTNAME" = "$1" ] && echo "/dev/$(basename $DEVNAME)" && return 0
done
}
do_flash_emmc() {
local tar_file=$1
local emmcblock=$(find_mmc_part $2)
local board_dir=$3
local part=$4
[ -z "$emmcblock" ] && {
echo failed to find $2
return
}
echo erase $4
dd if=/dev/zero of=${emmcblock} 2> /dev/null
echo flash $4
tar Oxf $tar_file ${board_dir}/$part | dd of=${emmcblock}
}
emmc_do_upgrade() {
local tar_file="$1"
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
do_flash_emmc $tar_file '0:HLOS' $board_dir kernel
do_flash_emmc $tar_file 'rootfs' $board_dir root
local emmcblock="$(find_mmc_part "rootfs_data")"
if [ -e "$emmcblock" ]; then
mkfs.ext4 -F "$emmcblock"
fi
}
platform_check_image() {
local magic_long="$(get_magic_long "$1")"
board=$(board_name)
case $board in
cig,wf186w|\
cig,wf186h|\
sonicfi,rap630c-311g|\
sonicfi,rap630w-311g|\
sonicfi,rap630w-312g|\
sonicfi,rap630e|\
cybertan,eww631-a1|\
cybertan,eww631-b1|\
edgecore,eap104|\
emplus,wap385c|\
wallys,dr5018|\
hfcl,ion4x_w|\
hfcl,ion4xi_w|\
indio,um-325ax-v2|\
indio,um-335ax|\
indio,um-525axp|\
optimcloud,d60|\
optimcloud,d60-5g|\
optimcloud,d50|\
optimcloud,d50-5g|\
yuncore,fap655|\
glinet,b3000|\
udaya,a6-id2|\
udaya,a6-od2|\
edgecore,oap101|\
edgecore,oap101-6e|\
edgecore,oap101e|\
emplus,wap581|\
edgecore,oap101e-6e)
[ "$magic_long" = "73797375" ] && return 0
;;
esac
return 1
}
platform_do_upgrade() {
CI_UBIPART="rootfs"
CI_ROOTPART="ubi_rootfs"
CI_IPQ807X=1
board=$(board_name)
case $board in
indio,um-325ax-v2|\
indio,um-335ax|\
indio,um-525axp|\
edgecore,oap101|\
edgecore,oap101-6e|\
edgecore,oap101e|\
edgecore,oap101e-6e|\
edgecore,eap104)
if [ "$(find_mtd_chardev rootfs)" ]; then
CI_UBIPART="rootfs"
else
if grep -q rootfs1 /proc/cmdline; then
CI_UBIPART="rootfs2"
CI_FWSETENV="active 2"
else
CI_UBIPART="rootfs1"
CI_FWSETENV="active 1"
fi
fi
nand_upgrade_tar "$1"
;;
glinet,b3000)
CI_UBIPART="rootfs1"
[ "$(find_mtd_chardev rootfs)" ] && CI_UBIPART="rootfs"
nand_upgrade_tar "$1"
;;
hfcl,ion4x_w|\
hfcl,ion4xi_w)
wp_part=$(fw_printenv primary | cut -d = -f2)
echo "Current Primary is $wp_part"
if [[ $wp_part == 1 ]]; then
CI_UBIPART="rootfs"
CI_FWSETENV="primary 0"
else
CI_UBIPART="rootfs_1"
CI_FWSETENV="primary 1"
fi
nand_upgrade_tar "$1"
;;
cig,wf186w|\
cig,wf186h|\
emplus,wap385c|\
udaya,a6-id2|\
udaya,a6-od2|\
wallys,dr5018|\
optimcloud,d60|\
optimcloud,d60-5g|\
optimcloud,d50|\
optimcloud,d50-5g|\
emplus,wap581|\
yuncore,fap655)
[ -f /proc/boot_info/rootfs/upgradepartition ] && {
CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
CI_BOOTCFG=1
}
nand_upgrade_tar "$1"
;;
cybertan,eww631-a1|\
cybertan,eww631-b1|\
sonicfi,rap630c-311g|\
sonicfi,rap630w-311g|\
sonicfi,rap630w-312g|\
sonicfi,rap630e)
boot_part=$(fw_printenv bootfrom | cut -d = -f2)
echo "Current bootfrom is $boot_part"
if [[ $boot_part == 1 ]]; then
CI_UBIPART="rootfs"
CI_FWSETENV="bootfrom 0"
elif [[ $boot_part == 0 ]]; then
CI_UBIPART="rootfs_1"
CI_FWSETENV="bootfrom 1"
fi
nand_upgrade_tar "$1"
;;
esac
}