Chg: helm set v2.0.0-RC1 image

.clang-format

@@ -1,178 +1,7 @@
----
-Language:        Cpp
-# BasedOnStyle:  LLVM
-AccessModifierOffset: -2
-AlignAfterOpenBracket: Align
-AlignArrayOfStructures: None
-AlignConsecutiveMacros: None
-AlignConsecutiveAssignments: None
-AlignConsecutiveBitFields: None
-AlignConsecutiveDeclarations: None
-AlignEscapedNewlines: Right
-AlignOperands:   Align
-AlignTrailingComments: true
-AllowAllArgumentsOnNextLine: true
-AllowAllConstructorInitializersOnNextLine: true
-AllowAllParametersOfDeclarationOnNextLine: true
-AllowShortEnumsOnASingleLine: true
-AllowShortBlocksOnASingleLine: Never
-AllowShortCaseLabelsOnASingleLine: false
-AllowShortFunctionsOnASingleLine: All
-AllowShortLambdasOnASingleLine: All
-AllowShortIfStatementsOnASingleLine: Never
-AllowShortLoopsOnASingleLine: false
-AlwaysBreakAfterDefinitionReturnType: None
-AlwaysBreakAfterReturnType: None
-AlwaysBreakBeforeMultilineStrings: false
-AlwaysBreakTemplateDeclarations: MultiLine
-AttributeMacros:
-  - __capability
-BinPackArguments: true
-BinPackParameters: true
-BraceWrapping:
-  AfterCaseLabel:  false
-  AfterClass:      false
-  AfterControlStatement: Never
-  AfterEnum:       false
-  AfterFunction:   false
-  AfterNamespace:  false
-  AfterObjCDeclaration: false
-  AfterStruct:     false
-  AfterUnion:      false
-  AfterExternBlock: false
-  BeforeCatch:     false
-  BeforeElse:      false
-  BeforeLambdaBody: false
-  BeforeWhile:     false
-  IndentBraces:    false
-  SplitEmptyFunction: true
-  SplitEmptyRecord: true
-  SplitEmptyNamespace: true
-BreakBeforeBinaryOperators: None
-BreakBeforeConceptDeclarations: true
-BreakBeforeBraces: Attach
-BreakBeforeInheritanceComma: false
-BreakInheritanceList: BeforeColon
-BreakBeforeTernaryOperators: true
-BreakConstructorInitializersBeforeComma: false
-BreakConstructorInitializers: BeforeColon
-BreakAfterJavaFieldAnnotations: false
-BreakStringLiterals: true
-ColumnLimit:     100
-CommentPragmas:  '^ IWYU pragma:'
-CompactNamespaces: false
-ConstructorInitializerAllOnOneLineOrOnePerLine: false
-ConstructorInitializerIndentWidth: 4
-ContinuationIndentWidth: 4
-Cpp11BracedListStyle: true
-DeriveLineEnding: true
-DerivePointerAlignment: false
-DisableFormat:   false
-EmptyLineAfterAccessModifier: Never
-EmptyLineBeforeAccessModifier: LogicalBlock
-ExperimentalAutoDetectBinPacking: false
-FixNamespaceComments: true
-ForEachMacros:
-  - foreach
-  - Q_FOREACH
-  - BOOST_FOREACH
-IfMacros:
-  - KJ_IF_MAYBE
-IncludeBlocks:   Preserve
-IncludeCategories:
-  - Regex:           '^"(llvm|llvm-c|clang|clang-c)/'
-    Priority:        2
-    SortPriority:    0
-    CaseSensitive:   false
-  - Regex:           '^(<|"(gtest|gmock|isl|json)/)'
-    Priority:        3
-    SortPriority:    0
-    CaseSensitive:   false
-  - Regex:           '.*'
-    Priority:        1
-    SortPriority:    0
-    CaseSensitive:   false
-IncludeIsMainRegex: '(Test)?$'
-IncludeIsMainSourceRegex: ''
-IndentAccessModifiers: false
-IndentCaseLabels: false
-IndentCaseBlocks: false
-IndentGotoLabels: true
-IndentPPDirectives: None
-IndentExternBlock: AfterExternBlock
-IndentRequires:  false
-IndentWidth:     4
-IndentWrappedFunctionNames: false
-InsertTrailingCommas: None
-JavaScriptQuotes: Leave
-JavaScriptWrapImports: true
-KeepEmptyLinesAtTheStartOfBlocks: true
-LambdaBodyIndentation: Signature
-MacroBlockBegin: ''
-MacroBlockEnd:   ''
-MaxEmptyLinesToKeep: 1
-NamespaceIndentation: All
-ObjCBinPackProtocolList: Auto
-ObjCBlockIndentWidth: 2
-ObjCBreakBeforeNestedBlockParam: true
-ObjCSpaceAfterProperty: false
-ObjCSpaceBeforeProtocolList: true
-PenaltyBreakAssignment: 2
-PenaltyBreakBeforeFirstCallParameter: 19
-PenaltyBreakComment: 300
-PenaltyBreakFirstLessLess: 120
-PenaltyBreakString: 1000
-PenaltyBreakTemplateDeclaration: 10
-PenaltyExcessCharacter: 1000000
-PenaltyReturnTypeOnItsOwnLine: 60
-PenaltyIndentedWhitespace: 0
-PointerAlignment: Right
-PPIndentWidth:   -1
-ReferenceAlignment: Pointer
-ReflowComments:  true
-ShortNamespaceLines: 1
-SortIncludes:    CaseSensitive
-SortJavaStaticImport: Before
-SortUsingDeclarations: true
-SpaceAfterCStyleCast: false
-SpaceAfterLogicalNot: false
-SpaceAfterTemplateKeyword: true
-SpaceBeforeAssignmentOperators: true
-SpaceBeforeCaseColon: false
-SpaceBeforeCpp11BracedList: false
-SpaceBeforeCtorInitializerColon: true
-SpaceBeforeInheritanceColon: true
-SpaceBeforeParens: ControlStatements
-SpaceAroundPointerQualifiers: Default
-SpaceBeforeRangeBasedForLoopColon: true
-SpaceInEmptyBlock: false
-SpaceInEmptyParentheses: false
-SpacesBeforeTrailingComments: 1
-SpacesInAngles:  Never
-SpacesInConditionalStatement: false
-SpacesInContainerLiterals: true
-SpacesInCStyleCastParentheses: false
-SpacesInLineCommentPrefix:
-  Minimum:         1
-  Maximum:         -1
-SpacesInParentheses: false
-SpacesInSquareBrackets: false
-SpaceBeforeSquareBrackets: false
-BitFieldColonSpacing: Both
-Standard:        Latest
-StatementAttributeLikeMacros:
-  - Q_EMIT
-StatementMacros:
-  - Q_UNUSED
-  - QT_REQUIRE_VERSION
-TabWidth:        4
-UseCRLF:         false
-UseTab:          Always
-WhitespaceSensitiveMacros:
-  - STRINGIZE
-  - PP_STRINGIZE
-  - BOOST_PP_STRINGIZE
-  - NS_SWIFT_NAME
-  - CF_SWIFT_NAME
-...
 
+BasedOnStyle: LLVM
+TabWidth:     4
+IndentWidth:  4
+UseTab:       Always
+ColumnLimit:  100
+Language:     Cpp

.github/workflows/ci.yml

@@ -13,7 +13,6 @@ on:
   pull_request:
     branches:
       - master
-      - 'release/*'
 
 defaults:
   run:
@@ -21,81 +20,110 @@ defaults:
 
 jobs:
   docker:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-20.04
     env:
       DOCKER_REGISTRY_URL: tip-tip-wlan-cloud-ucentral.jfrog.io
       DOCKER_REGISTRY_USERNAME: ucentral
     steps:
-    - name: Checkout actions repo
-      uses: actions/checkout@v3
+    - uses: actions/checkout@v2
+
+    - name: Build Docker image
+      run: docker build -t wlan-cloud-owgw:${{ github.sha }} .
+
+    - name: Tag Docker image
+      run: |
+        TAGS="${{ github.sha }}"
+
+        if [[ ${GITHUB_REF} == "refs/heads/"* ]]
+        then
+          CURRENT_TAG=$(echo ${GITHUB_REF#refs/heads/} | tr '/' '-')
+          TAGS="$TAGS $CURRENT_TAG"
+        else
+          if [[ ${GITHUB_REF} == "refs/tags/"* ]]
+          then
+            CURRENT_TAG=$(echo ${GITHUB_REF#refs/tags/} | tr '/' '-')
+            TAGS="$TAGS $CURRENT_TAG"
+          else # PR build
+            CURRENT_TAG=$(echo ${GITHUB_HEAD_REF#refs/heads/} | tr '/' '-')
+            TAGS="$TAGS $CURRENT_TAG"
+          fi
+        fi
+
+        echo "Result tags: $TAGS"
+
+        for tag in $TAGS; do
+          docker tag wlan-cloud-owgw:${{ github.sha }} ${{ env.DOCKER_REGISTRY_URL }}/owgw:$tag
+        done
+
+    - name: Log into Docker registry
+      if: startsWith(github.ref, 'refs/tags/') || startsWith(github.ref, 'refs/pull/') || github.ref == 'refs/heads/master'
+      uses: docker/login-action@v1
       with:
-        repository: Telecominfraproject/.github
-        path: github
+        registry: ${{ env.DOCKER_REGISTRY_URL }}
+        username: ${{ env.DOCKER_REGISTRY_USERNAME }}
+        password: ${{ secrets.DOCKER_REGISTRY_PASSWORD }}
 
-    - name: Build and push Docker image
-      uses: ./github/composite-actions/docker-image-build
-      with:
-        image_name: owgw
-        registry: tip-tip-wlan-cloud-ucentral.jfrog.io
-        registry_user: ucentral
-        registry_password: ${{ secrets.DOCKER_REGISTRY_PASSWORD }}
+    - name: Push Docker images
+      if: startsWith(github.ref, 'refs/tags/') || startsWith(github.ref, 'refs/pull/') || github.ref == 'refs/heads/master'
+      run: |
+        docker images | grep ${{ env.DOCKER_REGISTRY_URL }}/owgw | awk -F ' ' '{print $1":"$2}' | xargs -I {} docker push {}
 
-    - name: Notify on failure via Slack
-      if: failure() && github.ref == 'refs/heads/master'
-      uses: rtCamp/action-slack-notify@v2
-      env:
-        SLACK_USERNAME: GitHub Actions failure notifier
-        SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
-        SLACK_COLOR: "${{ job.status }}"
-        SLACK_ICON: https://raw.githubusercontent.com/quintessence/slack-icons/master/images/github-logo-slack-icon.png
-        SLACK_TITLE: Docker build failed for OWGW service
-
-  trigger-testing:
-    if: startsWith(github.ref, 'refs/pull/')
-    runs-on: ubuntu-latest
+  docker-compose:
+    if: startsWith(github.ref, 'refs/tags/') || startsWith(github.ref, 'refs/pull/') || github.ref == 'refs/heads/master'
+    runs-on: ubuntu-20.04
     needs: docker
     steps:
-    - name: Get base branch name and set as output
-      id: get_base_branch
-      run: |
-        echo "branch=$(echo ${GITHUB_BASE_REF##*/} | sed 's/master/main/g')" >> $GITHUB_OUTPUT
-
-    - name: Checkout actions repo
-      uses: actions/checkout@v3
+    - name: Check out wlan-cloud-ucentral-deploy repository
+      uses: actions/checkout@v2
       with:
-        repository: Telecominfraproject/.github
-        path: github
+        repository: Telecominfraproject/wlan-cloud-ucentral-deploy
+        path: wlan-cloud-ucentral-deploy
 
-    - name: Trigger testing of OpenWifi Docker Compose deployment and wait for result
-      uses: ./github/composite-actions/trigger-workflow-and-wait
+    - name: Instantiate Docker Compose deployment
+      working-directory: ./wlan-cloud-ucentral-deploy/docker-compose
       env:
-        BASE_BRANCH: ${{ steps.get_base_branch.outputs.branch }}
-      with:
-        owner: Telecominfraproject
-        repo: wlan-testing
-        workflow: ow_docker-compose.yml
-        token: ${{ secrets.WLAN_TESTING_PAT }}
-        ref: master
-        inputs: '{"deployment_version": "${{ env.BASE_BRANCH }}", "owgw_version": "${{ github.sha }}", "owsec_version": "${{ env.BASE_BRANCH }}", "owfms_version": "${{ env.BASE_BRANCH }}", "owprov_version": "${{ env.BASE_BRANCH }}", "owanalytics_version": "${{ env.BASE_BRANCH }}", "owsub_version": "${{ env.BASE_BRANCH }}", "microservice": "owgw"}'
+        OWGW_TAG: ${{ github.sha }}
+      run: |
+        docker-compose -f docker-compose.yml -f docker-compose.selfsigned.yml --env-file .env.selfsigned up -d
 
-  trigger-deploy-to-dev:
-    runs-on: ubuntu-latest
-    if: github.ref == 'refs/heads/master'
-    needs:
-      - docker
-    steps:
-    - name: Checkout actions repo
-      uses: actions/checkout@v3
-      with:
-        repository: Telecominfraproject/.github
-        path: github
+    - name: Wait for OWSec to be alive and kicking
+      run: |
+        n=0
+        until [ "$n" -ge 3 ]
+        do
+          curl -s 127.0.0.1:16102 && break
+          n=$((n+1))
+          if [ "$n" -eq 3]; then
+            exit 1
+          else
+            sleep 3
+          fi
+        done
 
-    - name: Trigger deployment of the latest version to dev instance and wait for result
-      uses: ./github/composite-actions/trigger-workflow-and-wait
+    - name: Check out wlan-cloud-ucentralgw repository
+      uses: actions/checkout@v2
       with:
-        owner: Telecominfraproject
-        repo: wlan-testing
-        workflow: ucentralgw-dev-deployment.yaml
-        token: ${{ secrets.WLAN_TESTING_PAT }}
-        ref: master
-        inputs: '{"force_latest": "true"}'
+        path: wlan-cloud-ucentralgw
+
+    - name: Check functionality of microservices
+      env:
+        OWSEC: "openwifi.wlan.local:16001"
+        FLAGS: "-s --cacert ./wlan-cloud-ucentral-deploy/docker-compose/certs/restapi-ca.pem --resolve openwifi.wlan.local:16001:127.0.0.1"
+      run: |
+        ./wlan-cloud-ucentralgw/test_scripts/curl/cli listdevices
+
+    - name: Display information about running containers and log ucentralgw output
+      working-directory: ./wlan-cloud-ucentral-deploy/docker-compose
+      if: always()
+      run: |
+        docker-compose -f docker-compose.yml -f docker-compose.selfsigned.yml --env-file .env.selfsigned ps -a
+        docker-compose -f docker-compose.yml -f docker-compose.selfsigned.yml --env-file .env.selfsigned logs
+
+    # disable until repo is public
+    #- name: export Docker image
+    #  run: docker image save -o wlan-cloud-ucentralgw-${{ github.sha }}.tar wlan-cloud-ucentralgw:${{ github.sha }}
+
+    #- uses: actions/upload-artifact@v2
+    #  with:
+    #    name: docker-image
+    #    path: wlan-cloud-ucentralgw-${{ github.sha }}.tar

.github/workflows/cleanup.yml

@@ -17,10 +17,4 @@ jobs:
     - name: Cleanup Docker image with PR branch tag 
       run: | 
         export PR_BRANCH_TAG=$(echo ${GITHUB_HEAD_REF#refs/heads/} | tr '/' '-')
-
-        if [[ ! $PR_BRANCH_TAG =~ (main|master|release-*) ]]; then
-          echo "PR branch is $PR_BRANCH_TAG, deleting Docker image"
-          curl -s -uucentral:${{ secrets.DOCKER_REGISTRY_PASSWORD }} -X DELETE "https://tip.jfrog.io/artifactory/tip-wlan-cloud-ucentral/owgw/$PR_BRANCH_TAG"
-        else
-          echo "PR branch is $PR_BRANCH_TAG, not deleting Docker image"
-        fi
+        curl -uucentral:${{ secrets.DOCKER_REGISTRY_PASSWORD }} -X DELETE "https://tip.jfrog.io/artifactory/tip-wlan-cloud-ucentral/owgw/$PR_BRANCH_TAG"

.github/workflows/enforce-jira-issue-key.yml

@@ -1,24 +0,0 @@
-name: Ensure Jira issue is linked
-
-on:
-  pull_request:
-    types: [opened, edited, reopened, synchronize]
-    branches:
-      - 'release/*'
-
-jobs:
-  check_for_issue_key:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout actions repo
-        uses: actions/checkout@v3
-        with:
-          repository: Telecominfraproject/.github
-          path: github
-
-      - name: Run JIRA check
-        uses: ./github/composite-actions/enforce-jira-issue-key
-        with:
-          jira_base_url: ${{ secrets.TIP_JIRA_URL }}
-          jira_user_email: ${{ secrets.TIP_JIRA_USER_EMAIL }}
-          jira_api_token: ${{ secrets.TIP_JIRA_API_TOKEN }}

.github/workflows/openapi-pages.yml

@@ -1,41 +0,0 @@
-name: Update OpenAPI docs on GitHub Pages
-
-on:
-  push:
-    paths:
-      - 'openapi/**'
-    branches:
-      - master
-  workflow_dispatch:
-
-defaults:
-  run:
-    shell: bash
-
-jobs:
-  docsgen:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-
-      - name: Generate static HTML page with docs from OpenAPI definition
-        run: |
-          docker run --rm -v "${PWD}:/local" openapitools/openapi-generator-cli:v6.2.1 generate -i https://raw.githubusercontent.com/Telecominfraproject/wlan-cloud-ucentralgw/master/openapi/owgw.yaml -g html2 --skip-validate-spec -o /local/
-
-      - name: Update OpenAPI docs
-        run: |
-          mkdir tmp-docs
-          mv index.html tmp-docs/index.html
-          mkdir -p ~/.ssh
-          ssh-keyscan -H github.com >> ~/.ssh/known_hosts
-          echo https://tip-automation:${{ secrets.GIT_PUSH_PAT }}@github.com > ~/.git-credentials
-          git config --global credential.helper store
-          git config --global user.email "tip-automation@telecominfraproject.com"
-          git config --global user.name "TIP Automation User"
-          git pull
-          git checkout gh-pages || git checkout -b gh-pages
-          rm -rf docs
-          mv tmp-docs docs
-          git add docs
-          git commit -m'Update OpenAPI docs for GitHub pages'
-          git push --set-upstream origin gh-pages

.github/workflows/release.yml

@@ -1,46 +0,0 @@
-name: Release chart package
-
-on:
-  push:
-    tags:
-      - 'v*'
-
-defaults:
-  run:
-    shell: bash
-
-jobs:
-  helm-package:
-    runs-on: ubuntu-latest
-    env:
-      HELM_REPO_URL: https://tip.jfrog.io/artifactory/tip-wlan-cloud-ucentral-helm/
-      HELM_REPO_USERNAME: ucentral
-    steps:
-      - name: Checkout uCentral assembly chart repo
-        uses: actions/checkout@v3
-        with:
-          path: wlan-cloud-ucentralgw
-
-      - name: Build package
-        working-directory: wlan-cloud-ucentralgw/helm
-        run: |
-          helm plugin install https://github.com/aslafy-z/helm-git --version 0.10.0
-          helm repo add bitnami https://charts.bitnami.com/bitnami
-          helm repo update
-          helm dependency update
-          mkdir dist
-          helm package . -d dist
-
-      - name: Generate GitHub release body
-        working-directory: wlan-cloud-ucentralgw/helm
-        run: |
-          pip3 install yq -q
-          echo "Docker image - tip-tip-wlan-cloud-ucentral.jfrog.io/owgw:$GITHUB_REF_NAME" > release.txt
-          echo "Helm charted may be attached to this release" >> release.txt
-          echo "Deployment artifacts may be found in https://github.com/Telecominfraproject/wlan-cloud-ucentral-deploy/tree/$GITHUB_REF_NAME" >> release.txt
-
-      - name: Create GitHub release
-        uses: softprops/action-gh-release@v1
-        with:
-          body_path: wlan-cloud-ucentralgw/helm/release.txt
-          files: wlan-cloud-ucentralgw/helm/dist/*

.gitignore

@@ -21,12 +21,10 @@ _deps
 /docker-compose/.env
 /docker-compose/.env_*
 /cmake-build/
+/uploads/
 test_scripts/curl/token.json
 .vscode/c_cpp_properties.json
 test_scripts/curl/result.json
 *.swp
 helm/charts/*
 !helm/charts/.gitkeep
-/portal-test/
-/src/ow_version.h
-.vscode/*

.idea/.gitignore

@@ -6,5 +6,3 @@
 /dataSources.local.xml
 # Editor-based HTTP Client requests
 /httpRequests/
-# GitHub Copilot persisted chat sessions
-/copilot/chatSessions

.idea/misc.xml

@@ -1,8 +1,5 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <project version="4">
-  <component name="Black">
-    <option name="sdkName" value="Python 3.9 (wlan-cloud-ucentralgw)" />
-  </component>
   <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
   <component name="CidrRootsConfiguration">
     <excludeRoots>

.idea/ucentral.iml

@@ -2,7 +2,7 @@
 <module classpath="CMake" type="CPP_MODULE" version="4">
   <component name="FacetManager">
     <facet type="Python" name="Python facet">
-      <configuration sdkName="Python 3.9 (wlan-cloud-ucentralgw)" />
+      <configuration sdkName="Python 3.9 (venv)" />
     </facet>
   </component>
 </module>

.idea/vcs.xml

@@ -2,6 +2,5 @@
 <project version="4">
   <component name="VcsDirectoryMappings">
     <mapping directory="$PROJECT_DIR$" vcs="Git" />
-    <mapping directory="$PROJECT_DIR$/cmake-build-debug/rapidjson-test" vcs="Git" />
   </component>
 </project>

BUILDING.md

@@ -1,196 +0,0 @@
-# Building from source
-In order to build OWGW, you will need to install its dependencies, which includes the following:
-- cmake
-- boost
-- POCO 1.10.1 or later
-- a C++17 compiler
-- openssl
-- libpq-dev (PortgreSQL development libraries)
-- mysql-client (MySQL client)
-- librdkafka
-- cppkafka
-
-The build is done in 2 parts. The first part is to build a local copy of the framework tailored to your environment. This
-framework is called [Poco](https://github.com/pocoproject/poco). The version used in this project has a couple of fixes
-from the master copy needed for cmake. Please use the version of this [Poco fix](https://github.com/Telecominfraproject/wlan-cloud-lib-poco). Building
-Poco may take several minutes depending on the platform you are building on.
-
-## Ubuntu
-These instructions have proven to work on Ubuntu 20.4.
-```bash
-sudo apt install git cmake g++ libssl-dev libmariadb-dev \
-    libpq-dev libaprutil1-dev apache2-dev libboost-all-dev \
-    librdkafka-dev // default-libmysqlclient-dev \
-    nlohmann-json-dev
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-poco --branch poco-tip-v1 poco
-cd poco
-mkdir cmake-build
-cd cmake-build
-cmake ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-cd ../..
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-cppkafka --branch tip-v1 cppkafka
-cd cppkafka
-mkdir cmake-build
-cd cmake-build
-cmake ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-cd ../..
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-valijson --branch tip-v1 valijson
-cd valijson
-mkdir cmake-build
-cd cmake-build
-cmake ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-cd ../..
-
-git clone https://github.com/fmtlib/fmt --branch 9.0.0 /fmtlib
-cd fmtlib
-mkdir cmake-build
-cd cmake-build
-cmake ..
-make
-make install
-cd ../..
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-ucentralgw
-cd wlan-cloud-ucentralgw
-mkdir cmake-build
-cd cmake-build
-cmake ..
-make -j 8
-cd ../..
-```
-
-## Fedora
-The following instructions have proven to work on Fedora 33
-```bash
-sudo yum install cmake g++ openssl-devel mysql-devel mysql apr-util-devel boost boost-devel \
-    yaml-cpp-devel lua-devel
-sudo dnf install postgresql.x86_64 librdkafka-devel
-sudo dnf install postgresql-devel json-devel
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-poco --branch poco-tip-v1 poco
-cd poco
-mkdir cmake-build
-cd cmake-build
-cmake ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-cd ../..
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-cppkafka --branch tip-v1 cppkafka
-cd cppkafka
-mkdir cmake-build
-cd cmake-build
-cmake ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-cd ../..
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-valijson --branch tip-v1 valijson
-cd valijson
-mkdir cmake-build
-cd cmake-build
-cmake ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-cd ../..
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-ucentralgw
-cd wlan-cloud-ucentralgw
-mkdir cmake-build
-cd cmake-build
-cmake ..
-make
-cd ../..
-```
-
-## macOS Build
-The following instructions have proven to work on macOS Big Sur. You need to install [Homebrew](https://brew.sh/). You must also have installed [XCode for OS X](https://www.freecodecamp.org/news/how-to-download-and-install-xcode/).
-```bash
-brew install openssl \
-	cmake \
-	libpq \
-	mysql-client \
-	apr \
-	apr-util \
-	boost \
-	yaml-cpp \
-	postgresql \
-	librdkafka \
-	nlohmann-json \
-	fmt
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-poco --branch poco-tip-v1 poco
-pushd poco
-mkdir cmake-build
-push cmake-build
-cmake -DOPENSSL_ROOT_DIR=</path/to/openssl> -DENABLE_NETSSL=1 -DENABLE_JWT=1 -DENABLE_CRYPTO=1 ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-popd
-popd
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-cppkafka --branch tip-v1 cppkafka
-pushd cppkafka
-mkdir cmake-build
-pushd cmake-build
-cmake ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-popd
-popd
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-valijson --branch tip-v1 valijson
-pushd valijson
-mkdir cmake-build
-pushd cmake-build
-cmake ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-popd
-popd
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-ucentralgw
-pushd wlan-cloud-ucentralgw
-mkdir cmake-build
-pushd cmake-build
-cmake ..
-make -j
-popd
-popd
-```
-
-## Raspberry
-The build on a rPI takes a while. You can shorten that build time and requirements by disabling all the larger database
-support. You can build with only SQLite support by not installing the packages for PostgreSQL, and MySQL by
-adding -DSMALL_BUILD=1 on the cmake build line.
-
-```bash
-sudo apt install git cmake g++ libssl-dev libaprutil1-dev apache2-dev \
-    libboost-all-dev libyaml-cpp-dev
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-lib-poco --branch poco-tip-v1 poco
-cd poco
-mkdir cmake-build
-cd cmake-build
-cmake ..
-cmake --build . --config Release
-sudo cmake --build . --target install
-cd ../..
-
-git clone https://github.com/Telecominfraproject/wlan-cloud-ucentralgw
-cd wlan-cloud-ucentralgw
-mkdir cmake-build
-cd cmake-build
-cmake -DSMALL_BUILD=1 ..
-make
-cd ../..
-```

CLI.md

@@ -7,139 +7,139 @@ cli help
 
 ## The commands
 
-### getdevice `serial`                
+### getdevice <serial>                
 Get the device JSON document.
 
-### deletedevice `serial`             
+### deletedevice <serial>             
 Delete the device.
 
-### createdevice `serial` `cfg` `MAC` 
+### createdevice <serial> <cfg> <MAC> 
 Create a device using the default configuration. 
 - `serial`: device serial number
 - `cfg`: JSON config file name
 - `MAC`: string MAC Address
 
-### getdevicestatus `serial`
+### getdevicestatus <serial>
 Get the device status JSON document.
 - `serial`: device serial number
 
-### getstats `serial`
+### getstats <serial>
 Get statistics for the device.
 - `serial`: device serial number
 
-### gethealthchecks `serial`
+### gethealthchecks <serial>
 Get healthchecks for a device.
 - `serial`: device serial number
 
-### newesthealthchecks `serial`
+### newesthealthchecks <serial>
 Get newest healthchecks for a device.
 - `serial`: device serial number
 
-### lasthealthcheck `serial`
+### lasthealthcheck <serial>
 Get the last healthcheck
 - `serial`: device serial number
 
-### getcapababilities `serial`
+### getcapababilities <serial>
 Get the device capabilities JSON document.
 - `serial`: device serial number
 
-### deletecapababilities `serial`
+### deletecapababilities <serial>
 Delete the device capabilities JSON.
 - `serial`: device serial number
 
-### reboot `serial`                   
+### reboot <serial>                   
 Reboot the device.
 - `serial`: device serial number
 
-### upgrade `serial` `URI` 
+### upgrade <serial> <URI> 
 Do firmware upgrade for a device.
 - `serial`: device serial number
 - `URI`: complete URI where the upgrade file exists. No validation is performed.
 
-### leds `serial` `pattern` `duration`       
+### leds <serial> <pattern> <duration>       
 Activate LEDs a device.
 - `serial`: device serial number
 - `pattern`: on/off/blink
 - `duration`: number in seconds
 
-### configure `serial` `cfg`          
+### configure <serial> <cfg>          
 Change configuration for a device.
 - `serial`: device serial number
 - `cfg`: JSON config file name
 
-### factory `serial` `keep_redirector`     
+### factory <serial> <keep_redirector>     
 Do factory reset for device. 
 - `serial`: device serial number
 - `keep_redirector`: true=keep redirector, false=reset redirector
 
-### request `serial` `message`        
+### request <serial> <message>        
 Force a message from the device.
 - `serial`: device serial number
 - `message`: state or healthcheck
                                  
-### wifiscan `serial` `verbose`       
+### wifiscan <serial> <verbose>       
 Do wifiscan for a device.
 - `serial`: device serial number
 - `verbose`: verbose=true/false
 
-### telemetry `serial`
+### telemetry <serial>
 Start `telemetry` stream for a device.
 
-### trace `serial` `duration` `network`            
+### trace <serial> <duration> <network>            
 Launch a remote trace for a device.
 - `serial`: device serial number
 - `duration`: number in seconds
 - `network`: which network to perform trace on: lan or wan  
                                   
-### getcommand `command-uuid`
+### getcommand <command-uuid>
 Get the command JSON document.
 - `command-uuid`: command UUID
 
-### deletecommand `command-uuid`      
+### deletecommand <command-uuid>      
 Delete the command.
 - `command-uuid`: command UUID
 
-### newestcommands `serial`
+### newestcommands <serial>
 Get the newest commands for a device.
 - `serial`: device serial number
 
 ### listdevices
 List devices.
 
-### listcommands `serial`
+### listcommands <serial>
 List commands for a specific device.
 - `serial`: device serial number
 
-### deletecommands `serial`
+### deletecommands <serial>
 Delete commands for a device.
 - `serial`: device serial number
 
-### getlogs `serial`                  
+### getlogs <serial>                  
 Get logs for the device.
 - `serial`: device serial number
 
-### newestlogs `serial`               
+### newestlogs <serial>               
 Get the latest logs for the device.
 - `serial`: device serial number
 
-### deletelogs `serial`               
+### deletelogs <serial>               
 Delete logs for the device.
 - `serial`: device serial number
 
-### eventqueue `serial`
+### eventqueue <serial>
 Request event queue for the device.
 - `serial`: device serial number
 
 ### listdefaultconfigs
 List default configurations.
 
-### createdefaultconfig `name` `ids` `cfg` 
+### createdefaultconfig <name> <ids> <cfg> 
 Create a default configuration
 - `name`: unique name, no spaces
 - `ids`: comma separated list of models
 - `cfg`: JSON config file name
 
-### addblacklistdevice `serial` `reason`   
+### addblacklistdevice <serial> <reason>   
 Add a device to the black list
 - `serial`: serial number of the device to add
 - `reason`: reason for blacklisting
@@ -147,7 +147,7 @@ Add a device to the black list
 ### getblacklist
 List all blacklisted devices
 
-### deleteblacklistdevice  `serial`   
+### deleteblacklistdevice  <serial>   
 Add a device to the black list.
 - `serial`: device serial number
 
@@ -157,7 +157,7 @@ Get the number of devices in the DB.
 ### deviceserialnumbers               
 Get only the serial numbers.
 
-### selectdevices `serial_list`       
+### selectdevices <serial_list>       
 Get a list of devices based on a list.
 - `serial_list`: serial numbers (must be comma separated).
 
@@ -179,30 +179,27 @@ Get the list of subsystems.
 ### systeminfo
 Get basic system information.
 
-### reloadsubsystem `subsystem name`
+### reloadsubsystem <subsystem name>
 Reload the configuration for a subsystem.### getfile <uuid>					  
 Get the file associated with trace command <uuid>.
 - `uuid`: UUID of file to retrieve
 
-### rtty `serial number`					  
+### rtty <serial>					  
 Get the details for an rtty session.
 - `serial`: device serial number
 
-### lifetimestats `serial number`			  
+### lifetimestats <serial>			  
 Get the lifetime stats counters for a device
 - `serial`: device serial number
 
-### laststats `serial number`			      
+### laststats <serial>			      
 Get the last statistics for a device.
 - `serial`: device serial number
 
-### neweststats `serial number`			  
+### neweststats <serial>			  
 Get the newest statistics for a device.
 - `serial`: device serial number
 
-### deviceping `serial number`
-This will return you the end-to-end latency from command-line to return value.
-
 ## Notes
 To pass additional flags to the CURL command, create an environment variable called FLAGS and git ve the values you
 want. For example, for force all call to use IPv6, set FLAGS=\"-6\", for verbose mode and IPv6, set FLAGS=\"-6 -v\"

CMakeLists.txt

@@ -1,8 +1,7 @@
 cmake_minimum_required(VERSION 3.13)
-project(owgw VERSION 4.1.1)
+project(owgw VERSION 2.2.0)
 
-set(CMAKE_CXX_STANDARD 20)
-set(CMAKE_CXX_STANDARD_REQUIRED True)
+set(CMAKE_CXX_STANDARD 17)
 
 if(UNIX AND APPLE)
     set(OPENSSL_ROOT_DIR /usr/local/opt/openssl)
@@ -21,42 +20,26 @@ endif()
 
 # Auto build increment. You must define BUILD_INCREMENT with cmake -DBUILD_INCREMENT=1
 if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/build)
-    file(READ ${CMAKE_CURRENT_SOURCE_DIR}/build BUILD_NUM)
+    file(READ build BUILD_NUM)
     if(BUILD_INCREMENT)
         MATH(EXPR BUILD_NUM "${BUILD_NUM}+1")
-        file(WRITE ${CMAKE_CURRENT_SOURCE_DIR}/build ${BUILD_NUM})
+        file(WRITE build ${BUILD_NUM})
     endif()
 else()
     set(BUILD_NUM 1)
-    file(WRITE ${CMAKE_CURRENT_SOURCE_DIR}/build ${BUILD_NUM})
+    file(WRITE build ${BUILD_NUM})
 endif()
+add_definitions(-DAPP_VERSION="${CMAKE_PROJECT_VERSION}" -DBUILD_NUMBER="${BUILD_NUM}")
+add_definitions(-DTIP_GATEWAY_SERVICE="1")
 
-if(ASAN)
-    add_compile_options(-fsanitize=address)
-    add_link_options(-fsanitize=address)
-    add_compile_options(-fsanitize=undefined)
-    add_link_options(-fsanitize=undefined)
-endif()
-
-find_package(Git QUIET)
-if(GIT_FOUND AND EXISTS "${PROJECT_SOURCE_DIR}/.git")
-    execute_process(COMMAND ${GIT_EXECUTABLE} rev-parse --short HEAD
-            WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-            RESULT_VARIABLE GIT_RESULT
-            OUTPUT_VARIABLE GIT_HASH)
-    if(NOT GIT_RESULT EQUAL "0")
-        message(FATAL_ERROR "git rev-parse --short HEAD failed with ${GIT_RESULT}")
-    endif()
-    string(REGEX REPLACE "\n$" "" GIT_HASH "${GIT_HASH}")
-endif()
-
-add_definitions(-DTIP_GATEWAY_SERVICE="1" -DPOCO_LOG_DEBUG="1" -DBOOST_NO_CXX98_FUNCTION_BASE=1)
-
+set(Boost_USE_STATIC_LIBS OFF)
+set(Boost_USE_MULTITHREADED ON)
+set(Boost_USE_STATIC_RUNTIME OFF)
+find_package(Boost REQUIRED system)
 find_package(OpenSSL REQUIRED)
 find_package(ZLIB REQUIRED)
-find_package(fmt  REQUIRED)
 find_package(nlohmann_json  REQUIRED)
-# find_package(valijson       REQUIRED)
+find_package(nlohmann_json_schema_validator REQUIRED)
 
 if(SMALL_BUILD)
     find_package(Poco REQUIRED COMPONENTS Crypto JWT Net Util NetSSL Data DataSQLite)
@@ -69,155 +52,58 @@ endif()
 
 include_directories(/usr/local/include  /usr/local/opt/openssl/include src include/kafka /usr/local/opt/mysql-client/include)
 
-configure_file(src/ow_version.h.in ${PROJECT_SOURCE_DIR}/src/ow_version.h @ONLY)
-
-add_compile_options(-Wall -Wextra)
-
 add_executable( owgw
-        build
-        src/ow_version.h.in
-        src/framework/CountryCodes.h
-        src/framework/KafkaTopics.h
-        src/framework/MicroService.h
-        src/framework/OpenWifiTypes.h
-        src/framework/orm.h
-        src/framework/StorageClass.h
-        src/framework/MicroServiceErrorHandler.h
-        src/framework/UI_WebSocketClientServer.cpp
-        src/framework/UI_WebSocketClientServer.h
-        src/framework/UI_WebSocketClientNotifications.cpp
-        src/framework/UI_WebSocketClientNotifications.h
-        src/framework/utils.h
-        src/framework/utils.cpp
-        src/framework/AppServiceRegistry.h
-        src/framework/SubSystemServer.cpp
-        src/framework/SubSystemServer.h
-        src/framework/RESTAPI_utils.h
-        src/framework/AuthClient.cpp
-        src/framework/AuthClient.h
-        src/framework/MicroServiceNames.h
-        src/framework/MicroServiceFuncs.h
-        src/framework/OpenAPIRequests.cpp
-        src/framework/OpenAPIRequests.h
-        src/framework/MicroServiceFuncs.cpp
-        src/framework/ALBserver.cpp
-        src/framework/ALBserver.h
-        src/framework/KafkaManager.cpp
-        src/framework/KafkaManager.h
-        src/framework/RESTAPI_RateLimiter.h
-        src/framework/WebSocketLogger.h
-        src/framework/RESTAPI_GenericServerAccounting.h
-        src/framework/CIDR.h
-        src/framework/RESTAPI_Handler.cpp
-        src/framework/RESTAPI_Handler.h
-        src/framework/RESTAPI_ExtServer.h
-        src/framework/RESTAPI_ExtServer.cpp
-        src/framework/RESTAPI_IntServer.cpp
-        src/framework/RESTAPI_IntServer.h
-        src/framework/RESTAPI_SystemCommand.h
-        src/framework/RESTAPI_WebSocketServer.h
-        src/framework/RESTAPI_SystemConfiguration.h
-        src/framework/EventBusManager.cpp
-        src/framework/EventBusManager.h
-        src/framework/RESTAPI_PartHandler.h
-        src/framework/MicroService.cpp
-        src/framework/MicroServiceExtra.h
-        src/RESTObjects/RESTAPI_SecurityObjects.h src/RESTObjects/RESTAPI_SecurityObjects.cpp
-        src/RESTObjects/RESTAPI_GWobjects.h src/RESTObjects/RESTAPI_GWobjects.cpp
-        src/RESTObjects/RESTAPI_FMSObjects.h src/RESTObjects/RESTAPI_FMSObjects.cpp
-        src/RESTObjects/RESTAPI_CertObjects.cpp src/RESTObjects/RESTAPI_CertObjects.h
-        src/RESTObjects/RESTAPI_OWLSobjects.cpp src/RESTObjects/RESTAPI_OWLSobjects.h
-        src/RESTObjects/RESTAPI_ProvObjects.cpp src/RESTObjects/RESTAPI_ProvObjects.h
-        src/RESTObjects/RESTAPI_AnalyticsObjects.cpp src/RESTObjects/RESTAPI_AnalyticsObjects.h
-        src/RESTObjects/RESTAPI_SubObjects.cpp src/RESTObjects/RESTAPI_SubObjects.h
-        src/RESTAPI/RESTAPI_devices_handler.cpp src/RESTAPI/RESTAPI_devices_handler.h
-        src/RESTAPI/RESTAPI_device_handler.cpp src/RESTAPI/RESTAPI_device_handler.h
-        src/RESTAPI/RESTAPI_device_commandHandler.cpp src/RESTAPI/RESTAPI_device_commandHandler.h
-        src/RESTAPI/RESTAPI_default_configuration.cpp
-        src/RESTAPI/RESTAPI_default_configuration.h src/RESTAPI/RESTAPI_default_configurations.cpp src/RESTAPI/RESTAPI_default_configurations.h
-        src/RESTAPI/RESTAPI_commands.cpp src/RESTAPI/RESTAPI_commands.h
-        src/RESTAPI/RESTAPI_command.cpp src/RESTAPI/RESTAPI_command.h
-        src/RESTAPI/RESTAPI_file.cpp src/RESTAPI/RESTAPI_file.h
-        src/RESTAPI/RESTAPI_blacklist.cpp src/RESTAPI/RESTAPI_blacklist.h
-        src/RESTAPI/RESTAPI_ouis.cpp src/RESTAPI/RESTAPI_ouis.h
-        src/RESTAPI/RESTAPI_blacklist_list.cpp src/RESTAPI/RESTAPI_blacklist_list.h
-        src/RESTAPI/RESTAPI_capabilities_handler.cpp src/RESTAPI/RESTAPI_capabilities_handler.h
-        src/RESTAPI/RESTAPI_RPC.cpp src/RESTAPI/RESTAPI_RPC.h
-        src/RESTAPI/RESTAPI_deviceDashboardHandler.cpp src/RESTAPI/RESTAPI_deviceDashboardHandler.h
-        src/RESTAPI/RESTAPI_telemetryWebSocket.cpp src/RESTAPI/RESTAPI_telemetryWebSocket.h
-        src/RESTAPI/RESTAPI_scripts_handler.cpp src/RESTAPI/RESTAPI_scripts_handler.h
-        src/RESTAPI/RESTAPI_script_handler.cpp src/RESTAPI/RESTAPI_script_handler.h
-        src/RESTAPI/RESTAPI_regulatory.cpp src/RESTAPI/RESTAPI_regulatory.h
-        src/RESTAPI/RESTAPI_radiussessions_handler.cpp src/RESTAPI/RESTAPI_radiussessions_handler.h
-
-        src/storage/storage_blacklist.cpp src/storage/storage_tables.cpp src/storage/storage_logs.cpp
-        src/storage/storage_command.cpp src/storage/storage_healthcheck.cpp src/storage/storage_statistics.cpp
-        src/storage/storage_device.cpp src/storage/storage_capabilities.cpp src/storage/storage_defconfig.cpp
-        src/storage/storage_scripts.cpp src/storage/storage_scripts.h
-        src/storage/storage_tables.cpp
-        src/RESTAPI/RESTAPI_routers.cpp
-        src/Daemon.cpp src/Daemon.h
-        src/AP_WS_Server.cpp src/AP_WS_Server.h
-        src/StorageService.cpp src/StorageService.h
-        src/CommandManager.cpp src/CommandManager.h
-        src/CentralConfig.cpp src/CentralConfig.h
-        src/FileUploader.cpp src/FileUploader.h
-        src/OUIServer.cpp src/OUIServer.h
-        src/StorageArchiver.cpp src/StorageArchiver.h
-        src/Dashboard.cpp src/Dashboard.h
-        src/SerialNumberCache.cpp src/SerialNumberCache.h
-        src/TelemetryStream.cpp src/TelemetryStream.h
-        src/framework/ConfigurationValidator.cpp src/framework/ConfigurationValidator.h
-        src/ConfigurationCache.h
-        src/CapabilitiesCache.h src/FindCountry.h
-        src/rttys/RTTYS_server.cpp
-        src/rttys/RTTYS_server.h
-        src/rttys/RTTYS_WebServer.cpp
-        src/rttys/RTTYS_WebServer.h src/RESTAPI/RESTAPI_device_helper.h
-        src/SDKcalls.cpp
-        src/SDKcalls.h
-        src/StateUtils.cpp src/StateUtils.h
-        src/AP_WS_Reactor_Pool.h
-        src/AP_WS_Connection.h
-        src/AP_WS_Connection.cpp
-        src/TelemetryClient.h src/TelemetryClient.cpp
-        src/RESTAPI/RESTAPI_iptocountry_handler.cpp src/RESTAPI/RESTAPI_iptocountry_handler.h
-        src/framework/ow_constants.h
-        src/GwWebSocketClient.cpp src/GwWebSocketClient.h
-        src/RADIUS_proxy_server.cpp src/RADIUS_proxy_server.h
-        src/RESTAPI/RESTAPI_radiusProxyConfig_handler.cpp src/RESTAPI/RESTAPI_radiusProxyConfig_handler.h
-        src/ParseWifiScan.h
-        src/RADIUS_helpers.h
-        src/VenueBroadcaster.h
-        src/sdks/sdk_prov.h
-        src/AP_WS_Process_connect.cpp
-        src/AP_WS_Process_state.cpp
-        src/AP_WS_Process_healthcheck.cpp
-        src/AP_WS_Process_log.cpp
-        src/AP_WS_Process_crashlog.cpp
-        src/AP_WS_Process_ping.cpp
-        src/AP_WS_Process_cfgpending.cpp
-        src/AP_WS_Process_recovery.cpp
-        src/AP_WS_Process_deviceupdate.cpp
-        src/AP_WS_Process_telemetry.cpp
-        src/AP_WS_Process_venuebroadcast.cpp
-        src/RADIUS_Destination.h
-        src/UI_GW_WebSocketNotifications.cpp src/UI_GW_WebSocketNotifications.h
-        src/framework/RESTAPI_SystemConfiguration.h
-        src/ScriptManager.cpp src/ScriptManager.h
-        src/SignatureMgr.h
-        src/AP_WS_Process_event.cpp
-        src/AP_WS_Process_wifiscan.cpp
-        src/AP_WS_Process_alarm.cpp
-        src/GWKafkaEvents.cpp src/GWKafkaEvents.h
-        src/RegulatoryInfo.cpp src/RegulatoryInfo.h
-        src/RADIUSSessionTracker.cpp src/RADIUSSessionTracker.h
-        src/libs/Scheduler.h src/libs/InterruptableSleep.h src/libs/ctpl_stl.h src/libs/Cron.h
-        src/GenericScheduler.cpp src/GenericScheduler.h src/framework/default_device_types.h src/AP_WS_Process_rebootLog.cpp src/AP_WS_ConfigAutoUpgrader.cpp src/AP_WS_ConfigAutoUpgrader.h src/RESTAPI/RESTAPI_default_firmwares.cpp src/RESTAPI/RESTAPI_default_firmwares.h src/RESTAPI/RESTAPI_default_firmware.cpp src/RESTAPI/RESTAPI_default_firmware.h src/storage/storage_def_firmware.cpp src/firmware_revision_cache.h src/sdks/sdk_fms.h
-        src/AP_WS_LookForUpgrade.cpp)
+                build
+                src/Daemon.cpp src/Daemon.h
+                src/RESTAPI_server.cpp src/RESTAPI_server.h
+                src/WebSocketServer.cpp src/WebSocketServer.h
+                src/SubSystemServer.cpp src/SubSystemServer.h
+                src/StorageService.cpp src/StorageService.h
+                src/RESTAPI_SecurityObjects.cpp src/RESTAPI_SecurityObjects.h
+                src/DeviceRegistry.cpp src/DeviceRegistry.h
+                src/RESTAPI_devices_handler.cpp src/RESTAPI_devices_handler.h
+                src/RESTAPI_device_handler.cpp src/RESTAPI_device_handler.h
+                src/RESTAPI_handler.cpp src/RESTAPI_handler.h
+                src/RESTAPI_device_commandHandler.cpp src/RESTAPI_device_commandHandler.h
+                src/RESTAPI_GWobjects.h src/RESTAPI_GWobjects.cpp
+                src/CentralConfig.cpp src/CentralConfig.h
+                src/RESTAPI_default_configuration.cpp
+                src/RESTAPI_InternalServer.cpp src/RESTAPI_InternalServer.h
+                src/RESTAPI_default_configuration.h src/RESTAPI_default_configurations.cpp src/RESTAPI_default_configurations.h
+                src/RESTAPI_commands.cpp src/RESTAPI_commands.h
+                src/CommandManager.cpp src/CommandManager.h
+                src/RESTAPI_command.cpp src/RESTAPI_command.h
+                src/FileUploader.cpp src/FileUploader.h
+                src/RESTAPI_file.cpp src/RESTAPI_file.h
+                src/RESTAPI_system_command.cpp src/RESTAPI_system_command.h
+                src/RESTAPI_BlackList.cpp src/RESTAPI_BlackList.h
+                src/Utils.h src/Utils.cpp src/storage_blacklist.cpp
+                src/storage_command.cpp src/storage_healthcheck.cpp src/storage_statistics.cpp src/storage_logs.cpp
+                src/storage_device.cpp src/storage_capabilities.cpp src/storage_defconfig.cpp
+                src/storage_tables.cpp
+                src/storage_setup.cpp
+                src/StateProcessor.cpp src/StateProcessor.h
+                src/storage_lifetime_stats.cpp src/uCentralProtocol.h src/RESTAPI_protocol.h
+                src/ALBHealthCheckServer.h src/Kafka_topics.h
+                src/OUIServer.cpp src/OUIServer.h
+                src/RESTAPI_ouis.cpp src/RESTAPI_ouis.h
+                src/MicroService.cpp src/MicroService.h
+                src/RESTAPI_RPC.cpp src/RESTAPI_RPC.h
+                src/AuthClient.cpp src/AuthClient.h
+                src/OpenAPIRequest.cpp src/OpenAPIRequest.h
+                src/RESTAPI_utils.h src/RESTAPI_utils.cpp
+                src/StorageArchiver.cpp src/StorageArchiver.h
+                src/Dashboard.cpp src/Dashboard.h
+                src/RESTAPI_deviceDashboardHandler.cpp src/RESTAPI_deviceDashboardHandler.h
+                src/SerialNumberCache.cpp src/SerialNumberCache.h
+                src/RESTAPI_webSocketServer.cpp src/RESTAPI_webSocketServer.h
+                src/OpenWifiTypes.h src/TelemetryStream.cpp src/TelemetryStream.h
+                src/RESTAPI_GenericServer.cpp src/RESTAPI_GenericServer.h
+                src/RESTAPI_errors.h src/RESTAPI_TelemetryWebSocket.cpp src/RESTAPI_TelemetryWebSocket.h
+                src/ConfigurationValidator.cpp src/ConfigurationValidator.h src/ConfigurationCache.cpp src/ConfigurationCache.h)
 
 if(NOT SMALL_BUILD)
-
+    target_sources(owgw PUBLIC src/KafkaManager.cpp src/KafkaManager.h)
 endif()
 
 INSTALL(TARGETS owgw
@@ -225,19 +111,14 @@ INSTALL(TARGETS owgw
 )
 
 target_link_libraries(owgw PUBLIC
-        ${Poco_LIBRARIES}
-        ${ZLIB_LIBRARIES}
-)
-
+                        ${Poco_LIBRARIES} ${Boost_LIBRARIES} ${ZLIB_LIBRARIES})
 if(NOT SMALL_BUILD)
     target_link_libraries(owgw PUBLIC
-            ${MySQL_LIBRARIES}
-            ${ZLIB_LIBRARIES}
-            CppKafka::cppkafka
-            fmt::fmt
-            resolv
-    )
+            ${MySQL_LIBRARIES} ${ZLIB_LIBRARIES}
+                CppKafka::cppkafka
+                nlohmann_json_schema_validator
+             )
     if(UNIX AND NOT APPLE)
         target_link_libraries(owgw PUBLIC PocoJSON)
     endif()
-endif()
+endif()

CODING_STYLE.md

@@ -0,0 +1,32 @@
+# Coding Style
+I just want ot make sure we all follow the same rules when contributing 
+code back into this tree.
+
+## Version of C++
+This project is based on the C++17 standard. If compiles as-is on most platforms 
+using either clang or g++. Do not use C++21 features for now. I would love to do some
+of the new stuff but let's wait for these features to be available on
+all compilers first. `coroutine` has to wait.
+
+## Naming
+Naming of pretty much anything uses Pascal naming. I know... You might not be a big fan or have 
+fallen to the JS gods and use camelNaming. Well, let's all make an effort to keep
+this coherent. Member variable naming adds a `_` at the end of the vars. Try to
+keep this standard going. Sometimes you must override a base class function and then of course
+you need to follow the base class. Let's be real...
+
+## File Sizes
+Do you best to keep your file sizes < 300 lines. It just makes the code more readable
+and shortens compile times. 
+
+## This is a cmake project
+This is a cmake project and you need to adhere to the cmake rules. If you need
+to add a package to the CMakeList, you need to ensure that the package is available
+on all required platforms and compiles. Remember that this project runs on Linux, OS X, 
+and the Raspberry PI.
+
+## Licensed packages
+When adding a package, you must also state the licensing for the package. MIT, BSD, Apache licenses
+are acceptable. No commercial licenses are allowed. 
+
+

CONFIGURATION.md

@@ -1,415 +0,0 @@
-# Controller Configuration Parameters
-
-## OWGW Specific Parameters
-### Websocket parameters
-This is the crucial section. I bet that 97.4% of all your problems will come from here, and it's boring. So put some good music on,
-give the kids the iPad, get a cup of coffee, and pay attention. Every field will be explained.
-
-```properties
-ucentral.websocket.host.0.backlog = 500
-ucentral.websocket.host.0.rootca = $OWGW_ROOT/certs/root.pem
-ucentral.websocket.host.0.issuer = $OWGW_ROOT/certs/issuer.pem
-ucentral.websocket.host.0.cert = $OWGW_ROOT/certs/websocket-cert.pem
-ucentral.websocket.host.0.key = $OWGW_ROOT/certs/websocket-key.pem
-ucentral.websocket.host.0.clientcas = $OWGW_ROOT/certs/clientcas.pem
-ucentral.websocket.host.0.cas = $OWGW_ROOT/certs/cas
-ucentral.websocket.host.0.address = *
-ucentral.websocket.host.0.port = 15002
-ucentral.websocket.host.0.security = strict
-ucentral.websocket.host.0.key.password = mypassword
-ucentral.websocket.maxreactors = 20
-```
-
-#### ucentral.websocket.host.0.backlog
-This is the number of concurrent devices you are expecting to call all at once. Not the current number of devices. This is how many will connect in the same exact second.
-Take the total number of devices you have and divide by 100. That's a good rule of thumb. Never go above 500.
-#### ucentral.websocket.host.0.rootca
-This is the root file as supplied by Digicert. You can find it [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/root.pem)
-#### ucentral.websocket.host.0.issuer
-This is the issuer file as supplied by Digicert. You can find it [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/issuer.pem)
-#### ucentral.websocket.host.0.cert
-This is a `pem` file that you will receive from Digicert for the gateway itself. This is the certificate for the gateway.
-#### ucentral.websocket.host.0.key
-This is a `pem` file that you will receive from Digicert for the gateway itself. The is the private key for the gateway.
-#### ucentral.websocket.host.0.clientcas
-This is a `pem` file that contains both the issuer and the root CA certificates. You can find it You can find it [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/clientcas.pem)
-#### ucentral.websocket.host.0.cas
-This is a directory where you will copy your own `cert.pem`, the `root.pem`, and the `issuer.pem` files.
-#### ucentral.websocket.host.0.address
-Leve this a `*` in the case you want to bind to all interfaces on your gateway host or select the address of a single interface.
-#### ucentral.websocket.host.0.port
-Leave to 15002 for now.
-#### ucentral.websocket.host.0.security
-Leave this as strict for now for devices.
-#### ucentral.websocket.host.0.key.password
-If you key file uses a password, please enter it here.
-#### ucentral.websocket.maxreactors
-A single reactor can handle between 1000-2000 devices. Never leave this smaller than 5 or larger than 50.
-
-### File uploader parameters
-Certain commands may require the Access Point to upload a file into the Controller. For this reason, there is a special embedded HTTP 
-server to receive these files.
-
-```properties
-openwifi.fileuploader.host.0.backlog = 100
-openwifi.fileuploader.host.0.rootca = $OWGW_ROOT/certs/restapi-ca.pem
-openwifi.fileuploader.host.0.security = relaxed
-openwifi.fileuploader.host.0.address = *
-openwifi.fileuploader.host.0.name = ucentral.dpaas.arilia.com
-openwifi.fileuploader.host.0.port = 16003
-openwifi.fileuploader.host.0.cert = $OWGW_ROOT/certs/restapi-cert.pem
-openwifi.fileuploader.host.0.key = $OWGW_ROOT/certs/restapi-key.pem
-openwifi.fileuploader.host.0.key.password = mypassword
-openwifi.fileuploader.path = $OWGW_ROOT/uploads
-openwifi.fileuploader.maxsize = 10000
-openwifi.fileuploader.uri = https://ucentral.dpaas.arilia.com:16003
-```
-
-#### openwifi.fileuploader.host.0.backlog
-This is the number of concurrent REST API calls that maybe be kept in the backlog for processing. That's a good rule of thumb. Never go above 500.
-#### openwifi.fileuploader.host.0.rootca
-This is the root file of your own certificate CA in `pem` format.
-#### openwifi.fileuploader.host.0.cert
-This is your own server certificate in `pem` format..
-#### openwifi.fileuploader.host.0.key
-This is the private key associated with your own certificate in `pem` format.
-#### openwifi.intfileuploaderernal.host.0.address
-Leve this a `*` in the case you want to bind to all interfaces on your gateway host or select the address of a single interface.
-#### openwifi.fileuploader.host.0.port
-The port on which the REST API server is listening. By default, this is 16003.
-#### openwifi.fileuploader.host.0.security
-Leave this as `relaxed` for now for devices.
-#### openwifi.fileuploader.host.0.key.password
-If you key file uses a password, please enter it here.
-#### openwifi.fileuploader.path
-This is the location where the files will be stored temporarily before processing. This `path` must exist.
-#### openwifi.fileuploader.maxsize 
-This is the maximum uploaded file size. The default maximum size if 10MB. This size is in KB.
-#### openwifi.fileuploader.uri
-This is the URI that will be passed to the AP. You must make sure that the AP can resolve this URI.
-
-### OUI Service
-The controller has a built-in OUI resolver for MAC addresses. The GW will periodically load this file to obtain the latest. 
-This is ths URI for this file.
-```properties
-oui.download.uri = https://standards-oui.ieee.org/oui/oui.txt
-```
-
-### Data-model Source
-The gateway can make use of the latest uCentral data-model or use the built-in model. These 2 parameters allow you to 
-choose which method you want. If you select the internal method, the URI is ignored. If for some reason you choose 
-the on-line data-model from the URI and the URI is not reachable, the system will fall back on the internal model.
-```properties
-ucentral.datamodel.internal = true
-ucentral.datamodel.uri = https://raw.githubusercontent.com/Telecominfraproject/wlan-ucentral-schema/main/ucentral.schema.json
-```
-
-### Command Manager
-The command manager is responsible for managing command sent and responses received with the APs. Several parameters allow you
-to fine tune its behaviour. Unless you have some particular reasons to change tem the defaults are usually just fine.
-```properties
-command.timeout = 14400
-command.retry = 120
-command.janitor = 120
-command.queue = 30
-```
-#### command.timeout
-How long will the GW wait in seconds before considering a commands has timed out. 
-
-#### command.retry
-How long between command retries.
-
-#### command.janitor
-How long between outstanding RPC clean-ups.
-
-#### command.queue
-How long should te gateway wait between running its queue.
-
-### IP to Country Parameters
-The controller has the ability to find the location of the IP of each Access Points. This uses an external IP location service. Currently,
-the controller supports 3 services. Please note that these services will require to obtain an API key or token, and these may cause you to incur 
-additional fees. Here is the list of the services supported:
-- ip2location: ip2location.com
-- ipdata: ipdata.co
-- ipinfo: ipinfo.io
-
-```properties
-iptocountry.default = US
-iptocountry.provider = ipinfo
-#iptocountry.provider = ipdata
-#iptocountry.provider = ip2location
-iptocountry.ipinfo.token =
-iptocountry.ipdata.apikey =
-iptocountry.ip2location.apikey =
-```
-
-#### iptocountry.default
-This is the country code to be used if no information can be found at one of the providers or you have not configured any of the providers.
-
-#### iptocountry.provider
-You must select onf of the possible services and the fill the appropriate token or api key parameter.
-
-### Provisioning link
-This parameter tells the controller how to behave when it receives a request from a device for the first time. In this case, we tell
-the controller to look at the provisioning service first, then apply any local configurations.
-```properties
-autoprovisioning.process = prov,default
-```
-
-### Restricted Device Signature Manager
-If are using restricted devices, then you can include different keys for each vendor who provided 
-you with their information. This allows the controller to automatically sign requests to the device. You can have as many vendors
-as it is necessary.
-
-```properties
-signature.manager.0.key.public = $OWGW_ROOT/certs/signatures/test1-public-key.pem
-signature.manager.0.key.private = $OWGW_ROOT/certs/signatures/test1-private-key.pem
-signature.manager.0.vendor = test1
-signature.manager.1.key.public = $OWGW_ROOT/certs/signatures/test2-public-key.pem
-signature.manager.1.key.private = $OWGW_ROOT/certs/signatures/test2-private-key.pem
-signature.manager.1.vendor = test2
-```
-
-### OWLS Simulator ID
-If you plan on using OWLS (OpenWifi Load Simulator), then you will need to put your Simulator ID right here.
-This ID must be obtained from TIP. 
-```properties
-simulatorid = 53494dFFEEDD
-```
-
-### RTTY Service
-The controller comes with the ability to run an RTTY service. The service can either be internal (the prefered choice) 
-or external. If you decide to use the internal RTTY, the you only need to specify `rtty.internal = true`. If you choose 
-to use an external RTTY, you must specify the remainder of the parameters.
-
-```properties
-rtty.internal = true
-rtty.enabled = true
-rtty.server = rtty-tip.arilia.com
-rtty.port = 5912
-rtty.token = 96181c567b4d0d98c50f127230068fa8
-rtty.timeout = 60
-rtty.viewport = 5913
-rtty.assets = $OWGW_ROOT/rtty_ui
-```
-
-### RADIUS proxy config
-If you are going to use the buil-in RADIUS proxy service, you need to enable this parameter and provide 
-the ports for you PROXY.
-```properties
-radius.proxy.enable = false
-radius.proxy.accounting.port = 1813
-radius.proxy.authentication.port = 1812
-radius.proxy.coa.port = 3799
-radsec.keepalive = 120
-```
-
-### Auto Archiver Parameters
-The auto archiver is responsible for removing all stale data. The default is to remove old data after 7 days.
-```properties
-archiver.enabled = true
-archiver.schedule = 03:00
-archiver.db.0.name = healthchecks
-archiver.db.0.keep = 7
-archiver.db.1.name = statistics
-archiver.db.1.keep = 7
-archiver.db.2.name = devicelogs
-archiver.db.2.keep = 7
-archiver.db.3.name = commandlist
-archiver.db.3.keep = 7
-```
-
-## Generic OpenWiFi SDK parameters
-### REST API External parameters
-These are the parameters required for the configuration of the external facing REST API server
-```properties
-openwifi.restapi.host.0.backlog = 100
-openwifi.restapi.host.0.security = relaxed
-openwifi.restapi.host.0.rootca = $OWGW_ROOT/certs/restapi-ca.pem
-openwifi.restapi.host.0.address = *
-openwifi.restapi.host.0.port = 16004
-openwifi.restapi.host.0.cert = $OWGW_ROOT/certs/restapi-cert.pem
-openwifi.restapi.host.0.key = $OWGW_ROOT/certs/restapi-key.pem
-openwifi.restapi.host.0.key.password = mypassword
-```
-
-#### openwifi.restapi.host.0.backlog
-This is the number of concurrent REST API calls that maybe be kept in the backlog for processing. That's a good rule of thumb. Never go above 500.
-#### openwifi.restapi.host.0.rootca
-This is the root file of your own certificate CA in `pem` format.
-#### openwifi.restapi.host.0.cert
-This is your own server certificate in `pem` format..
-#### openwifi.restapi.host.0.key
-This is the private key associated with your own certificate in `pem` format.
-#### openwifi.restapi.host.0.address
-Leve this a `*` in the case you want to bind to all interfaces on your gateway host or select the address of a single interface.
-#### openwifi.restapi.host.0.port
-The port on which the REST API server is listening. By default, this is 16002.
-#### openwifi.restapi.host.0.security
-Leave this as `relaxed` for now for devices.
-#### openwifi.restapi.host.0.key.password
-If you key file uses a password, please enter it here.
-
-### REST API Intra microservice parameters
-The following parameters describe the configuration for the inter-microservice HTTP server. You may use the same certificate/key
-you are using for your extenral server or another certificate.
-```properties
-openwifi.internal.restapi.host.0.backlog = 100
-openwifi.internal.restapi.host.0.security = relaxed
-openwifi.internal.restapi.host.0.rootca = $OWGW_ROOT/certs/restapi-ca.pem
-openwifi.internal.restapi.host.0.address = *
-openwifi.internal.restapi.host.0.port = 17004
-openwifi.internal.restapi.host.0.cert = $OWGW_ROOT/certs/restapi-cert.pem
-openwifi.internal.restapi.host.0.key = $OWGW_ROOT/certs/restapi-key.pem
-openwifi.internal.restapi.host.0.key.password = mypassword
-```
-
-#### openwifi.internal.host.0.backlog
-This is the number of concurrent REST API calls that maybe be kept in the backlog for processing. That's a good rule of thumb. Never go above 500.
-#### openwifi.internal.host.0.rootca
-This is the root file of your own certificate CA in `pem` format.
-#### openwifi.internal.host.0.cert
-This is your own server certificate in `pem` format..
-#### openwifi.internal.host.0.key
-This is the private key associated with your own certificate in `pem` format.
-#### openwifi.internal.host.0.address
-Leve this a `*` in the case you want to bind to all interfaces on your gateway host or select the address of a single interface.
-#### openwifi.internal.host.0.port
-The port on which the REST API server is listening. By default, this is 17002.
-#### openwifi.internal.host.0.security
-Leave this as `relaxed` for now for devices.
-#### openwifi.internal.host.0.key.password
-If you key file uses a password, please enter it here.
-
-### Microservice information
-These are different Microservie parameters. Following is a brief explanation.
-```properties
-openwifi.service.key = $OWGW_ROOT/certs/restapi-key.pem
-openwifi.service.key.password = mypassword
-openwifi.system.data = $OWGW_ROOT/data
-openwifi.system.uri.private = https://localhost:17004
-openwifi.system.uri.public = https://ucentral.dpaas.arilia.com:16002
-openwifi.system.uri.ui = https://ucentral-ui.arilia.com
-openwifi.security.restapi.disable = false
-openwifi.system.commandchannel = /tmp/app.ucentralfms
-openwifi.autoprovisioning = true
-```
-#### openwifi.service.key
-From time to time, the microservice must encrypt information. This is the key it should use. You may use the
-same keey as you RESTAPI or your server.
-#### openwifi.service.key.password
-The password for the `openwifi.service.key`
-#### openwifi.system.data
-The location of system data. This path must exist.
-#### openwifi.system.uri.private
-The URI to reach the controller on the internal port.
-#### openwifi.system.uri.public
-The URI to reach the controller from the outside world.
-#### openwifi.system.uri.ui
-The URI of the UI to manage this service
-#### openwifi.security.restapi.disable
-This allows to disable security for internal and external API calls. This should only be used if the controller
-sits behind an application load balancer that will actually do TLS. Setting this to `true` disables security.
-#### openwifi.system.commandchannel
-The UNIX socket command channel used by this service.
-#### openwifi.autoprovisioning
-Allow unknown devices to be provisioned by the system.
-
-### ALB Support
-In order to support an application load balancer health check verification, your need to provide the following parameters.
-```properties
-alb.enable = true
-alb.port = 16102
-```
-
-### Kafka
-The controller use Kafka, like all the other microservices. You must configure the kafka section in order for the
-system to work.
-```properties
-openwifi.kafka.group.id = gateway
-openwifi.kafka.client.id = gateway1
-openwifi.kafka.enable = true
-openwifi.kafka.brokerlist = my_Kafka.example.com:9092
-openwifi.kafka.auto.commit = false
-openwifi.kafka.queue.buffering.max.ms = 50
-```
-
-### openwifi.kafka.group.id
-The group ID is a single word that should identify the type of service tuning. In the case `gateway`
-### openwifi.kafka.client.id
-The client ID is a single service within that group ID. Each participant must have a unique client ID.
-### openwifi.kafka.enable
-Kafka should always be enabled.
-### openwifi.kafka.brokerlist
-The list of servers where your Kafka server is running. Comma separated.
-### openwifi.kafka.auto.commit
-Auto commit flag in Kafka. Leave as `false`.
-### openwifi.kafka.queue.buffering.max.ms
-Kafka buffering. Leave as `50`.
-### Kafka security
-If you intend to use SSL, you should look into Kafka Connect and specify the certificates below.
-```properties
-penwifi.kafka.ssl.ca.location =
-openwifi.kafka.ssl.certificate.location =
-openwifi.kafka.ssl.key.location =
-openwifi.kafka.ssl.key.password =
-```
-
-### DB Type
-The controller supports 3 types of Database. SQLite should only be used for sites with less than 100 APs or for testing in the lab.
-In order to select which database to use, you must set the `storage.type` value to sqlite, postgresql, or mysql.
-
-```properties
-storage.type = sqlite
-#storage.type = postgresql
-#storage.type = mysql
-```
-
-### Storage SQLite parameters
-Additional parameters to set for SQLite. The only important one is `storage.type.sqlite.db` which is the database name on disk.
-```properties
-storage.type.sqlite.db = gateway.db
-storage.type.sqlite.idletime = 120
-storage.type.sqlite.maxsessions = 128
-```
-
-### Storage Postgres
-Additional parameters to set if you select Postgres for your database. You must specify `host`, `username`, `password`,
-`database`, and `port`.
-```properties
-storage.type.postgresql.maxsessions = 64
-storage.type.postgresql.idletime = 60
-storage.type.postgresql.host = localhost
-storage.type.postgresql.username = gateway
-storage.type.postgresql.password = gateway
-storage.type.postgresql.database = gateway
-storage.type.postgresql.port = 5432
-storage.type.postgresql.connectiontimeout = 60
-```
-
-### Storage MySQL/MariaDB
-Additional parameters to set if you select mysql for your database. You must specify `host`, `username`, `password`,
-`database`, and `port`.
-```properties
-storage.type.mysql.maxsessions = 64
-storage.type.mysql.idletime = 60
-storage.type.mysql.host = localhost
-storage.type.postgresql.username = gateway
-storage.type.postgresql.password = gateway
-storage.type.postgresql.database = gateway
-storage.type.mysql.port = 3306
-storage.type.mysql.connectiontimeout = 60
-```
-
-### Logging Parameters
-The microservice provides extensive logging. If you would like to keep logging on disk, set the `logging.type = file`. If you only want
-console logging, `set logging.type = console`. When selecting file, `logging.path` must exist. `logging.level` sets the
-basic logging level for the entire controller. `logging.websocket` disables WebSocket logging.
-
-```properties
-logging.type = file
-logging.path = $OWGW_ROOT/logs
-logging.level = information
-logging.asynch = true
-logging.websocket = false
-```

CONTRIBUTING.md

@@ -1,38 +0,0 @@
-# How to Contribute
-
-We'd love to accept your patches and contributions to this project. There are
-just a few small guidelines you need to follow.
-
-## Version of C++
-This project is based on the C++17 standard and compiles as-is on most platforms 
-using either clang or g++. Do not use C++21 or C++23 features for now. Some core 
-libraries used in this project do not support C++21 or C++23 yet.
-
-## Variable Naming
-Naming of pretty much anything uses Pascal naming. Longer explicit names using casing. 
-Member variable naming adds a `_` at the end of the vars. Try to
-keep this standard going. Sometimes you must override a base class function and then of course
-you need to follow the base class.
-
-## This is a cmake project
-This is a cmake project, and you need to adhere to the cmake rules. If you need
-to add a package to the CMakeList, you need to ensure that the package is available
-on all required platforms and compiles. Remember that this project runs on Linux, OS X, 
-and the Raspberry PI.
-
-## Licensed packages
-When adding a package, you must also state the licensing for the package. MIT, BSD, Apache licenses
-are acceptable. No commercial licenses are allowed. 
-
-## clang formatting
-Please format your code using the included `.clang-format` file included in the project.
-
-```bash
-clang-format -i --style=<project root>/.clang-format myfile.cpp
-```
-
-## Pull Requests
-All submissions, including submissions by project members, require review. We
-accept GitHub pull requests. Please create a branch with the Jira name for addressing the issue you are fixing or the 
-feature you are implementing.
-Create a pull-request from the branch into master. 

Dockerfile

@@ -1,38 +1,18 @@
-ARG DEBIAN_VERSION=bookworm
-ARG POCO_VERSION=poco-tip-v4-tag
-ARG CPPKAFKA_VERSION=tip-v1
-ARG VALIJASON_VERSION=tip-v1.0.2
-ARG APP_NAME=owgw
-ARG APP_HOME_DIR=/openwifi
+FROM alpine AS builder
 
-FROM debian:$DEBIAN_VERSION AS build-base
+RUN apk add --update --no-cache \
+    openssl openssh \
+    ncurses-libs \
+    bash util-linux coreutils curl \
+    make cmake gcc g++ libstdc++ libgcc git zlib-dev yaml-cpp-dev \
+    openssl-dev boost-dev unixodbc-dev postgresql-dev mariadb-dev \
+    apache2-utils yaml-dev apr-util-dev \
+    lua-dev librdkafka-dev \
+    nlohmann-json
 
-RUN apt-get update && apt-get install --no-install-recommends -y \
-    make cmake g++ git \
-    libpq-dev libmariadb-dev libmariadbclient-dev-compat \
-    librdkafka-dev libboost-all-dev libssl-dev \
-    zlib1g-dev nlohmann-json3-dev ca-certificates libfmt-dev
-
-FROM build-base AS poco-build
-
-ARG POCO_VERSION
-
-ADD https://api.github.com/repos/Telecominfraproject/wlan-cloud-lib-poco/git/refs/tags/${POCO_VERSION} version.json
-RUN git clone https://github.com/Telecominfraproject/wlan-cloud-lib-poco --branch ${POCO_VERSION} /poco
-
-WORKDIR /poco
-RUN mkdir cmake-build
-WORKDIR cmake-build
-RUN cmake ..
-RUN cmake --build . --config Release -j8
-RUN cmake --build . --target install
-
-FROM build-base AS cppkafka-build
-
-ARG CPPKAFKA_VERSION
-
-ADD https://api.github.com/repos/Telecominfraproject/wlan-cloud-lib-cppkafka/git/refs/tags/${CPPKAFKA_VERSION} version.json
-RUN git clone https://github.com/Telecominfraproject/wlan-cloud-lib-cppkafka --branch ${CPPKAFKA_VERSION} /cppkafka
+RUN git clone https://github.com/stephb9959/poco /poco
+RUN git clone https://github.com/stephb9959/cppkafka /cppkafka
+RUN git clone https://github.com/pboettch/json-schema-validator /json-schema-validator
 
 WORKDIR /cppkafka
 RUN mkdir cmake-build
@@ -41,84 +21,54 @@ RUN cmake ..
 RUN cmake --build . --config Release -j8
 RUN cmake --build . --target install
 
-FROM build-base AS valijson-build
-
-ARG VALIJASON_VERSION
-
-ADD https://api.github.com/repos/Telecominfraproject/wlan-cloud-lib-valijson/git/refs/tags/${VALIJASON_VERSION} version.json
-RUN git clone https://github.com/Telecominfraproject/wlan-cloud-lib-valijson --branch ${VALIJASON_VERSION} /valijson
-
-WORKDIR /valijson
+WORKDIR /poco
 RUN mkdir cmake-build
 WORKDIR cmake-build
 RUN cmake ..
 RUN cmake --build . --config Release -j8
 RUN cmake --build . --target install
 
-FROM build-base AS app-build
-
-ARG APP_NAME
-
-ADD CMakeLists.txt build /${APP_NAME}/
-ADD cmake /${APP_NAME}/cmake
-ADD src /${APP_NAME}/src
-ADD .git /${APP_NAME}/.git
-
-COPY --from=poco-build /usr/local/include /usr/local/include
-COPY --from=poco-build /usr/local/lib /usr/local/lib
-COPY --from=cppkafka-build /usr/local/include /usr/local/include
-COPY --from=cppkafka-build /usr/local/lib /usr/local/lib
-COPY --from=valijson-build /usr/local/include /usr/local/include
-
-WORKDIR /${APP_NAME}
+WORKDIR /json-schema-validator
 RUN mkdir cmake-build
-WORKDIR /${APP_NAME}/cmake-build
+WORKDIR cmake-build
+RUN cmake ..
+RUN make
+RUN make install
+
+ADD CMakeLists.txt build /owgw/
+ADD cmake /owgw/cmake
+ADD src /owgw/src
+
+WORKDIR /owgw
+RUN mkdir cmake-build
+WORKDIR /owgw/cmake-build
 RUN cmake ..
 RUN cmake --build . --config Release -j8
 
-FROM debian:$DEBIAN_VERSION
+FROM alpine
 
-ARG APP_NAME
-ARG APP_HOME_DIR
+ENV OWGW_USER=owgw \
+    OWGW_ROOT=/owgw-data \
+    OWGW_CONFIG=/owgw-data
 
-ENV APP_NAME=$APP_NAME \
-    APP_USER=$APP_NAME \
-    APP_ROOT=/$APP_NAME-data \
-    APP_CONFIG=/$APP_NAME-data \
-    APP_HOME_DIR=$APP_HOME_DIR
+RUN addgroup -S "$OWGW_USER" && \
+    adduser -S -G "$OWGW_USER" "$OWGW_USER"
 
-# This is for legacy
-ENV OWGW_USER=$APP_USER \
-    OWGW_ROOT=$APP_ROOT \
-    OWGW_CONFIG=$APP_CONFIG
+RUN mkdir /openwifi
+RUN mkdir -p "$OWGW_ROOT" "$OWGW_CONFIG" && \
+    chown "$OWGW_USER": "$OWGW_ROOT" "$OWGW_CONFIG"
+RUN apk add --update --no-cache librdkafka mariadb-connector-c libpq unixodbc su-exec gettext ca-certificates
 
-RUN useradd $APP_USER
+COPY --from=builder /owgw/cmake-build/owgw /openwifi/owgw
+COPY --from=builder /cppkafka/cmake-build/src/lib/* /lib/
+COPY --from=builder /poco/cmake-build/lib/* /lib/
 
-RUN mkdir $APP_HOME_DIR
-RUN mkdir -p $APP_ROOT $APP_CONFIG && \
-    chown $APP_USER: $APP_ROOT $APP_CONFIG
-
-RUN apt-get update && apt-get install --no-install-recommends -y \
-    librdkafka++1 gosu gettext ca-certificates bash jq curl wget \
-    libmariadb-dev-compat libpq5 unixodbc postgresql-client libfmt9 sqlite3
-
-COPY readiness_check /readiness_check
-COPY test_scripts/curl/cli /cli
-
-COPY $APP_NAME.properties.tmpl /
+COPY owgw.properties.tmpl ${OWGW_CONFIG}/
 COPY docker-entrypoint.sh /
-COPY wait-for-postgres.sh /
-COPY rtty_ui /dist/rtty_ui
 RUN wget https://raw.githubusercontent.com/Telecominfraproject/wlan-cloud-ucentral-deploy/main/docker-compose/certs/restapi-ca.pem \
-    -O /usr/local/share/ca-certificates/restapi-ca-selfsigned.crt
-
-COPY --from=app-build /$APP_NAME/cmake-build/$APP_NAME $APP_HOME_DIR/$APP_NAME
-COPY --from=cppkafka-build /cppkafka/cmake-build/src/lib /usr/local/lib/
-COPY --from=poco-build /poco/cmake-build/lib /usr/local/lib/
-
-RUN ldconfig
+    -O /usr/local/share/ca-certificates/restapi-ca-selfsigned.pem 
 
 EXPOSE 15002 16002 16003 17002 16102
 
 ENTRYPOINT ["/docker-entrypoint.sh"]
-CMD ${APP_HOME_DIR}/${APP_NAME}
+CMD ["/openwifi/owgw"]

KAFKA.md

@@ -4,16 +4,15 @@ This is a fast moving target, so please visit often or set an alert in GitHub.
 ## Current plans
 Currently, most telemetry and reports created in the gateway will be issues as topics in Kafka. You should configure 
 your Kafka service with the following topics:
-- `healthcheck` : These are the `healthcheck` report sent from the AP.
-- `state` : This is emitted for every `state` report coming from the AP. This state report contains all the information of state reports.
+
 - `connection` : This is emitted whenever a device connects to the gateway. The report contains all ths information about the connection. 
+- `state` : This is emitted for every `state` report coming from the AP. This state report contains all the information of state reports.  
+- `healthcheck` : These are the `healthcheck` report sent from the AP.
 - `wifiscan` : Whenever a `wifiscan` report is generated, it will be submitted here.
-- `alerts` : Alerts originating from devices (future use).
-- `command` : Allow to send commands (future use).
 - `service_events` : Inter-service traffic.
-- `device_event_queue` : device events
-- `device_telemetry` : device telemetry. Telemetry must be started manually or through the device configuration.
-- `provisioning_change` : venue, configuration, entity changes from provisioning.
+- `security` : This will have application information (future use).
+- `command` : Allow to send commands (future use).
+- `alerts` : Alerts originating from devices (future use).
 
 ## Structure of `kafka` messages
 Messages use 2 formats

MICRO_SERVICE_PROTOCOL.md

@@ -1,194 +0,0 @@
-# Micro-service backbone responsibilities
-
-## Bus management
-Each microservice must get onto kafka and consume/produce messages on the kafka bus. The topic to subscribe to is `service_events`. 
-
-## System messages
-System messages are what maintains the collection of micro-services working on the system. Each message has the format
-
-```json
-{
-  "event": <event-type>,
-  "id": 1234567890,
-  "type": "owrrm",
-  "publicEndPoint": "https://myhostname.com:16020",
-  "privateEndPoint": "https://localhost:17020",
-  "key" : "289479847948794870749",
-  "version" : "1.0"
-}
-```
-
-### Responsibilities
-Each micro service is responsible to generate its own messages and keep track of messages coming from other 
-micro services. This is necessary so that any micro service may reach our any other micro service. This provides 
-discovery for any micro service. All current micro services provided in OpenWiFi perform these functions. If you leverage 
-the C++ framework, this functionality if performed automatically.
-
-### `event-type`
-Each micro service is responsible to generate and consume these events
-
-#### `join` event
-When a service start and joins the bus, it should generate an event-type of `join`. 
-
-### `leave` event
-When a service shuts down, it should generate a `leave` event-type. 
-
-### `keep-alive` event
-Every 30 seconds, a service should generate a `keep-alive` message.
-
-
-### `id`
-You should generate a random number from some unique factor for the system. This ID is used to identify different services. You should reuse that ID 
-when you restart.
-
-## The `type`
-The `type` in the system message is oen of the following:
-```c++
-	static const std::string uSERVICE_SECURITY{"owsec"};
-	static const std::string uSERVICE_GATEWAY{"owgw"};
-	static const std::string uSERVICE_FIRMWARE{ "owfms"};
-    static const std::string uSERVICE_TOPOLOGY{ "owtopo"};
-    static const std::string uSERVICE_PROVISIONING{ "owprov"};
-    static const std::string uSERVICE_OWLS{ "owls"};
-    static const std::string uSERVICE_SUBCRIBER{ "owsub"};
-    static const std::string uSERVICE_INSTALLER{ "owinst"};
-    static const std::string uSERVICE_ANALYTICS{ "owanalytics"};
-	static const std::string uSERVICE_OWRRM{ "owrrm"};
-```
-
-The `type` is what you should use to find the `privateEndPoint` you are looking to communicate with.
-
-### Example
-Assume you want to communicate with the gateway to configure a device. 
-
-```text
-1. Look into my list of current Micro-services for the type=owgw.
-2. Use the privateEndPoint associated with that entry
-```
-
-## REST API calls on the private interface
-For inter-service REST calls, you should never use the `Authorization: Bearer token` method. Instead, the following headers should be included in all API calls
-```json
-{
-  "X-API-KEY" : "289479847948794870749",
-  "X-INTERNAL-NAME" : "https://myhostname.com:16020"
-}
-```
-
-### `X-API-KEY`
-This is the `key` you included in your `system-messages`. 
-
-### `X-INTERNAL-NAME`
-This is the `publicEndPoint` you included in your `system-messages`.
-
-This method can _only_ be used to any another `privateEndPoint` in the system. You can use the exact same EndPoints provided in the OpenAPI files for any of the services.
-
-## OpenAPI Integration
-To appear in the UI consoles, a microservice should be able to handle a get to the `/api/v1/system` endpoint on its `publicEndPoint` interface.
-
-Here is a brief description of what the microservice should answer:
-```yaml
-  /system:
-    get:
-      tags:
-        - System Commands
-      summary: Retrieve different values from the running service.
-      operationId: getSystemCommand
-      parameters:
-        - in: query
-          description: Get a value
-          name: command
-          schema:
-            type: string
-            enum:
-              - info
-          required: true
-
-      responses:
-        200:
-          description: Successful command execution
-          content:
-            application/json:
-              schema:
-                oneOf:
-                  - $ref: '#/components/schemas/SystemInfoResults'
-        403:
-          $ref: '#/components/responses/Unauthorized'
-        404:
-          $ref: '#/components/responses/NotFound'
-```
-The relevant data structures are:
-```yaml
-    SystemInfoResults:
-      type: object
-      properties:
-        version:
-          type: string
-        uptime:
-          type: integer
-          format: integer64
-        start:
-          type: integer
-          format: integer64
-        os:
-          type: string
-        processors:
-          type: integer
-        hostname:
-          type: string
-        certificates:
-          type: array
-          items:
-            type: object
-            properties:
-              filename:
-                type: string
-              expires:
-                type: integer
-                format: int64
-
-```
-and 
-```yaml
-  responses:
-    NotFound:
-      description: The specified resource was not found.
-      content:
-        application/json:
-          schema:
-            properties:
-              ErrorCode:
-                type: integer
-              ErrorDetails:
-                type: string
-              ErrorDescription:
-                type: string
-
-    Unauthorized:
-      description: The requested does not have sufficient rights to perform the operation.
-      content:
-        application/json:
-          schema:
-            properties:
-              ErrorCode:
-                type: integer
-                enum:
-                  - 0     # Success
-                  - 1     # PASSWORD_CHANGE_REQUIRED,
-                  - 2     # INVALID_CREDENTIALS,
-                  - 3     # PASSWORD_ALREADY_USED,
-                  - 4     # USERNAME_PENDING_VERIFICATION,
-                  - 5     # PASSWORD_INVALID,
-                  - 6     # INTERNAL_ERROR,
-                  - 7     # ACCESS_DENIED,
-                  - 8     # INVALID_TOKEN
-                  - 9     # EXPIRED_TOKEN
-                  - 10    # RATE_LIMIT_EXCEEDED
-                  - 11    # BAD_MFA_TRANSACTION
-                  - 12    # MFA_FAILURE
-                  - 13    # SECURITY_SERVICE_UNREACHABLE
-              ErrorDetails:
-                type: string
-              ErrorDescription:
-                type: string
-```

OPENAPI.md

@@ -2,14 +2,9 @@
 This document will describe how the API is built and how to use it. 
 
 ## Where is the OpenAPI.
-This uses OpenAPI definition 3.0 and can be found [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/openapi/ucentral/owgw.yaml).
+This uses OpenAPI definition 3.0 and can be found [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/openapi/ucentral/ucentral.yaml).
 All endpoints begin with `/api/v1`.
 
-## OpenAPI docs
-You may get static page with OpenAPI docs generated from the definition on [GitHub Page](https://telecominfraproject.github.io/wlan-cloud-ucentralgw).
-
-Also you may use [Swagger UI](https://petstore.swagger.io/#/) with OpenAPI definition file raw link (i.e. [latest version file](https://raw.githubusercontent.com/Telecominfraproject/wlan-cloud-ucentralgw/master/openapi/owgw.yaml)) to get interactive docs page.
-
 ## The flow
 In order to use any of the API calls, you must obtain a token (I know - shocking). You do so by calling the end-point
 `/oauth2`. Once you obtain that `access-token`, you will need to pass it in the headers under `Authorization: Bearer <place your token here>`.

PROTOCOL.md

@@ -30,7 +30,7 @@ In this RPC, here are some common interpretations:
 #### Connection event
 Device Sends connection notification to the controller after establishing a connection. The controller
 my decide to send the AP a newer configuration. The controller will record the device capabilities provided.
-```json
+```
 {     "jsonrpc" : "2.0" , 
       "method" : "connect" , 
       "params" : {
@@ -47,7 +47,7 @@ my decide to send the AP a newer configuration. The controller will record the d
 #### State event
 The device sends device state information periodically. If the controller detects that it has a newer configuration, it
 may decide to send this new configuration to the AP.
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "state" , 
     "params" : {
@@ -62,7 +62,7 @@ may decide to send this new configuration to the AP.
 #### Healthcheck event
 Device sends a `healthcheck` periodically. This message contains information about how vital subsystems are operating and 
 if they need attention.
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "healthcheck" , 
     "params" : {
@@ -77,7 +77,7 @@ if they need attention.
 
 #### Log event
 Device sends a log message whenever necessary. The controller will log this message to the log system for the device.
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "log" , 
     "params" : {
@@ -89,54 +89,6 @@ Device sends a log message whenever necessary. The controller will log this mess
 }
 ```
 
-#### Events Channel
-Device sends unsolicited events to the controller.
-```json
-{   "jsonrpc" : "2.0" , 
-    "method" : "event" , 
-    "params" : {
-        "serial" : "001122334455" ,
-        "data" : { 
-          "event" : [
-            1871263817263,
-            {
-              "type" : "the event type",
-              "payload" : {
-                "field1" : "value1"
-              }
-            }
-          ]
-        }
-    }
-}
-```
-
-The first element of the `event` array is always the `timestamp` of the event. The `payload` is a JSON document contains addition information about the event. This _may not_ be empty.
-
-#### Alarms Channel
-Device sends unsolicited alarms to the controller.
-```json
-{   "jsonrpc" : "2.0" , 
-    "method" : "alarm" , 
-    "params" : {
-        "serial" : <serial number> ,
-        "data" : <Optiona/may be empty: JSON Document providing additional information related to this event message>
-    }
-}
-```
-
-#### Wifiscan Channel
-Device sends unsolicited wifiscans to the controller.
-```json
-{   "jsonrpc" : "2.0" , 
-    "method" : "wifiscan" , 
-    "params" : {
-        "serial" : <serial number> ,
-        "data" : <Optiona/may be empty: JSON Document providing additional information related to this wifiscan message>
-    }
-}
-```
-
 ##### `severity`
 The `severity` matches the `syslog` levels. Here are the details:
 - 0 : LOG_EMERG       0       /* system is unusable */
@@ -149,40 +101,23 @@ The `severity` matches the `syslog` levels. Here are the details:
 - 7 : LOG_DEBUG       7       /* debug-level messages */
 
 #### Crash Log event
-Device may send a `crash log event` during rebooting after a crash. The event cannot be sent until a connection event has been established.
-```json
+Device may send a crash log event after rebooting after a crash. The event cannot be sent until a connection event has been sent.
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "crashlog" , 
     "params" : {
-        "serial"    : <serial number> ,
-        "uuid"      : <the UUID of the configuration that generated the crash log>,
-        "loglines"  : [ an array of strings representing the logs from the log file ]
+        "serial" : <serial number> ,
+        "uuid"   : <the UUID of the configuration that generated the crash log>,
+        "loglines" : [ an array of strings representing the logs from the log file ]
       }
 }
 ```
 
-#### Reboot Log event
-The device may send a `reboot log event` after a reboot. This maybe a scheduled reboot or caused in some other way.
-```json
-{   "jsonrpc" : "2.0" , 
-    "method" : "rebootLog" , 
-    "params" : {
-        "serial"  : <serial number> ,
-        "uuid"    : <the UUID of the configuration that generated the reboot log>,
-        "date"    : <Unix time when this reboot occurred>,
-        "type"    : <string>,
-        "info"    : [ "info 1", "info 2"]
-      }
-}
-```
-
-Here is a possible list of reboot reasons:
-
 #### Config change pending event
 Device sends this message to tell the controller that the device 
 has received a configuration but is still running an older configuration. The controller will not
 reply to this message.
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "cfgpending" , 
     "params" : {
@@ -196,7 +131,7 @@ reply to this message.
 #### DeviceUpdate event
 Device sends this message to tell the controller it is changing something is its configuration because
 of some requirement or some changes.
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "deviceupdate" , 
     "params" : {
@@ -210,7 +145,7 @@ of some requirement or some changes.
 #### Send a keepalive to the controller event
 Device sends a keepalive whenever necessary. The device will send this message to tell the controller
 which version it is running. The Controller may decide to send the device a newer configuration.
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "ping" , 
     "params" : {
@@ -220,50 +155,6 @@ which version it is running. The Controller may decide to send the device a newe
 }
 ```
 
-#### Recovery Event
-Device may decide it has to do into recovery mode. This event should be used.
-```json
-{   "jsonrpc" : "2.0" , 
-    "method" : "recovery" , 
-    "params" : {
-        "serial" : <serial number> ,
-        "uuid"   : <the UUID of the configuration that generated the crash log>,
-        "firmware: <the string describing the current firmware>,
-        "reboot" : true/false    (shoudld the device be instructed to reboot after loggin the information),
-        "loglines" : [ an array of strings representing the logs from the log file ]
-      }
-}
-```
-
-The device should answer:
-```json
-{    "jsonrpc" : "2.0" ,
-    "result" : {
-        "serial" : <serial number> ,
-        "status" : {
-          "error" : 0 or an error number,
-          "text" : <description of the error or success>
-        }
-  },
-  "id" : <same number>
-}
-```
-
-#### Device requests a venue broadcast message
-Device send this message when it wants to reach out to all other APs in the same venue. The GW will find the 
-venue where this device belongs and resend the same message to all other devices in the venue.
-```json
-{   "jsonrpc" : "2.0" , 
-    "method" : "venue_broadcast" , 
-    "params" : {
-        "serial" : <serial number> ,
-        "timestamp" : <the UTC timestamp when the message was sent>,
-        "data" : <JSON document to broadcast>
-    }
-}
-```
-Upon receiving a `venue_broadcast` message, the GW will simply resent the message to all the APs in the venue.
-
 ### Controller commands
 Most controller commands include a `when` member. This is a UTC clock time asking the AP
 to perform the command at that time. This is a suggestion only. The AP may ignore this
@@ -273,7 +164,7 @@ always a numeric parameter.
 #### Controller wants the device to apply a given configuration
 Controller sends this command when it believes the device should load a new configuration. The device
 should send message with `pending change` events until this version has been applied and running.
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "configure" , 
     "params" : {
@@ -287,7 +178,7 @@ should send message with `pending change` events until this version has been app
 ```
 
 The device should answer:
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "result" : {
          "serial" : <serial number> ,
@@ -306,54 +197,8 @@ The device should answer:
          },
      "id" : <same number>
 }
-```
-
-#### Controller wants the device to apply a given fixed configuration
-
-Controller sends this command when it requires the device to apply fixed configuration, eg. country code. The device
-should respond with message indicating failure or success.
-
-```json
-{   "jsonrpc" : "2.0",
-    "method" : "fixedconfig",
-    "params" : {
-        "serial" : <serial number>,
-        "when" : Optional - <UTC time when to apply this config, 0 means immediate, this is a suggestion>
-        "country" : "<country-code>"
-     },
-}
-```
-
-If AP supports compressed configuration feature by inidcating `compress_cmd=true` in its capabilities, controller
-will send a compressed configuration message where configuration payload (i.e. contents of `params`) is compressed
-and encoded in base64 format:
-```json
-{   "jsonrpc" : "2.0",
-    "method" : "configure",
-    "params" : {
-        "compress_64" : "<b64 encoded zlib compressed payload>",
-        "compress_sz" : "<size of uncompressed data in bytes>"
-     },
-     "id" : <some number>
-}
-```
-
-The device should answer:
-```json
-{   "jsonrpc" : "2.0",
-    "result" : {
-        "serial": <serial number>,
-        "status": {
-            "error": 0 or an error number,
-            "text": <description of the error or success, eg. "Applied fixed config, rebooting">
-        },
-        "uuid": <UUID>
-    }
-}
 
 ```
-
-
 ##### The Answer
 The device can answer and tell the controller it has rejected certain parts of the config and potentially replaced them with
 appropriate values. This could be used to allow a device to replace frequencies for the regions it is located in. The device 
@@ -372,7 +217,7 @@ The rejected section is an array containing the following:
 
 #### Controller wants the device to reboot
 Controller sends this command when it believes the device should reboot.
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "reboot" , 
      "params" : {
@@ -384,7 +229,7 @@ Controller sends this command when it believes the device should reboot.
 ```
 
 The device should answer:
-```json
+```
 {     "jsonrpc" : "2.0" , 
       "result" : {
       "serial" : <serial number> ,
@@ -401,56 +246,22 @@ The device should answer:
 - 1 : the device is busy but will reboot soon. `text` may indicate why.
 - 2 : the device will not reboot. `text` contains information as to why.
 
-#### Controller wants to power-cycle PoE port(s)
-Controller sends this command to power-cycle 1 or more PoE ports
-```json
-{    "jsonrpc" : "2.0" , 
-     "method" : "powercycle" , 
-     "params" : {
-	        "serial" : <serial number> ,
-            "ports" : [ { "name" :  "Ethernet1", "cycle" : 5000}, { "name" :  "Ethernet8", "cycle" : 10000 } ],
-	        "when" : Optional - <UTC time when to reboot, 0 mean immediately, this is a suggestion>
-     },
-     "id" : <some number>
-}
-```
-
-The device should answer:
-```json
-{     "jsonrpc" : "2.0" , 
-      "result" : {
-      "serial" : <serial number> ,
-      "status" : {
-	    "error" : 0 or an error number,
-	    "text" : [ "Error 1" , "Error 2" ],
-	    "when" : <time when this will be performed as UTC seconds>,
-  	},
-  "id" : <same id from request>
-}
-```
-
-###### Error codes
-- 0 : is rebooting at `when` seconds.
-- 1 : the device is busy but will reboot soon. `text` may indicate why.
-- 2 : the device will not reboot. `text` contains information as to why.
-
 #### Controller wants the device to upgrade its firmware
 Controller sends this command when it believes the device should upgrade its firmware.
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "upgrade" , 
      "params" : {
 	        "serial" : <serial number> ,
 	        "when"  : Optional - <UTC time when to upgrade the firmware, 0 mean immediate, this is a suggestion>,
-		    "uri"   : <URI to download the firmware>,
-            "FWsignature" : <string representation of the signature for the FW> (optional)
+		    "uri"   : <URI to download the firmware>
      },
      "id" : <some number>
 }
 ```
 
 The device should answer:
-```json
+```
 {     "jsonrpc" : "2.0" , 
       "result" : {
           "serial" : <serial number> ,
@@ -463,17 +274,10 @@ The device should answer:
       "id" : <same number>
 }
 ```
-Here are the error values
-```text
-0:  No error
-1:  Bad firmware
-2:  Missing signature
-```
-
 
 #### Controller wants the device to perform a factory reset
 Controller sends this command when it believes the device should upgrade its firmware.
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "factory" , 
      "params" : {
@@ -486,7 +290,7 @@ Controller sends this command when it believes the device should upgrade its fir
 ```
 
 The device should answer:
-```json
+```
 {     "jsonrpc" : "2.0" , 
       "result" : {
           "serial" : <serial number> ,
@@ -500,50 +304,9 @@ The device should answer:
 }
 ```
 
-#### Controller issuing RRM commands to the AP 
-Controller sends this command to perform several RRM commands.
-```json
-{    "jsonrpc" : "2.0" ,
-     "method" : "rrm" ,
-     "params" : {
-                "serial" : <serial number> ,
-                "actions": [
-                        {
-                                "type": "roam",
-                                "bss": [ "00:11:22:33:44:55", ... ],
-                                "params" : { action specific data }
-                        }, {
-                                "type": "tx-power",
-                                "bss": [ "00:11:22:33:44:55", ... ],
-                                “params”: { action specific data }
-                        }, {
-                                "type": "beacon-request",
-                                "bss": [ "00:11:22:33:44:55", ... ],
-                                "params": { action specific data }
-                        }
-                ]
-        },
-     "id" : <some number>
-}
-```
-
-The device should answer:
-```json
-{     "jsonrpc" : "2.0" , 
-      "result" : {
-          "serial" : <serial number> ,
-          "status" : {
-            "error" : 0 or an error number,
-            "text" : <description of the error or success>,
-          }
-      },
-  "id" : <same number>
-}
-```
-
 #### Controller wants the device to flash its LEDs
 Controller sends this command when it wants the device to flash its LEDs.
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "leds" , 
      "params" : {
@@ -557,13 +320,14 @@ Controller sends this command when it wants the device to flash its LEDs.
 ```
 
 The device should answer:
-```json
+```
 {     "jsonrpc" : "2.0" , 
       "result" : {
           "serial" : <serial number> ,
           "status" : {
             "error" : 0 or an error number,
             "text" : <description of the error or success>,
+            "when" : <time when this will be performed as UTC seconds>,
           }
   	},
   "id" : <same number>
@@ -575,9 +339,47 @@ The device should answer:
 - 1 : device cannot flash LEDs because it does not have any.
 - 2 : device rejects the request. `text` should include information as to why.
 
+#### Controller sends a device specific command
+Controller sends this command specific to this device. The command is proprietary and must be agreed upon by the device 
+and the controller.
+```
+{     "jsonrpc" : "2.0" , 
+      "method" : "perform" , 
+      "params" : {
+          "serial" : <serial number> ,
+          "when" : Optional - <UTC time when to perform this command, 0 mean immediate, this is a suggestion>,
+          "command" : <this is device specific and is TEXT only>,
+          "payload" : <JSON Document: containing additional information about the command>
+      },
+      "id" : <some number>
+}
+```
+
+The device should answer:
+```
+{     "jsonrpc" : "2.0" , 
+      "result" : {
+          "serial" : <serial number> ,
+          "status" : {
+            "error" : 0 or an error number,
+            "text" : <description of the error or success>,
+            "when" : <in UTC time in seconds>,
+            "resultCode" : <0 or an appropriate error code>,
+            "resultText" : <any text resulting from the command. This is propietary to each command>
+          }
+      },
+      "id" : <same number>
+}
+```
+##### The device answer
+The device should answer with teh above message. The `error` value should be interpreted the following way:
+- 0 : the command was performed as requested and the reults of the command is available in the `resultCode` and `resultText` parameters.
+- 1 : the command will be performed in the future and `when` shows that time. The `resultCode` and `resultText` dod not contain anything relevant.
+- 2 : the command cannot be performed as indicated. `resultCode` and `resultText` may contain some indication as to why.
+
 #### Controller wants the device to perform a trace
 Controller sends this command when it needs the device to perform a trace (i.e. tcpdump).
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "trace" , 
      "params" : {
@@ -594,7 +396,7 @@ Controller sends this command when it needs the device to perform a trace (i.e.
 ```
 
 The device should answer:
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "result" : {
           "serial" : <serial number> ,
@@ -620,7 +422,7 @@ uploaded or the timeout occurs, the upload will be rejected.
 
 #### Controller wants the device to perform a WiFi Scan
 Controller sends this command when it needs the device to perform a WiFi Scan.
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "wifiscan" , 
      "params" : {
@@ -628,16 +430,14 @@ Controller sends this command when it needs the device to perform a WiFi Scan.
 	        "bands" : [ "2","5","5l","5u",6" ], <optional this is a list of bands to scan: on or more bands >
 	        "channels" : [ 1,2,3...] , <optional list of discreet channels to scan >
 	        "verbose" : <optional boolean: true or false> (by default false),
-	        "bandwidth" : <optional int: 20,40,80 in MHz>,
-	        "active" : 0 or 1 (to select passive or active scan),
-	        "ies": <optional: array of unsigned int 8 bits: i.e. [1,4,34,58,91]> 
+	        "active" : 0 or 1 (to select passive or active scan)
         },
      "id" : <some number>
 }
 ```
 
 The device should answer:
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "result" : {
           "serial" : <serial number> ,
@@ -660,7 +460,7 @@ Controller sends this command when it needs the device to provide a message back
 supported messages are "state" and "healthcheck". More messages maybe added later. The messages will
 be returned the usual way. The RPC response to this message just says that the request has been accepted and the
 message will be returned "soon".
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "request" , 
      "params" : {
@@ -674,7 +474,7 @@ message will be returned "soon".
 ```
 
 The device should answer:
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "result" : {
           "serial" : <serial number> ,
@@ -690,7 +490,7 @@ The device should answer:
 
 #### Controller requesting eventqueue buffers
 Controller sends this command when it needs the device to provide the content of ist ring buffers.
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "event" , 
      "params" : {
@@ -704,7 +504,7 @@ Controller sends this command when it needs the device to provide the content of
 ```
 
 The device should answer:
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "result" : {
           "serial" : <serial number> ,
@@ -720,7 +520,7 @@ The device should answer:
 
 #### Controller requesting telemetry stream information
 Controller sends this command when it needs the device to telemetry streaming.
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "telemetry" , 
      "params" : {
@@ -733,7 +533,7 @@ Controller sends this command when it needs the device to telemetry streaming.
 ```
 
 The device should answer:
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "result" : {
           "serial" : <serial number> ,
@@ -747,7 +547,7 @@ The device should answer:
 ```
 
 When the interval is greater than 0, the gateway will start to receive messages
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "telemetry" , 
     "params" : {
@@ -762,7 +562,7 @@ The device will stop sending data after 30 minutes or if it receives a `telemetr
 
 #### Controller requesting an `rtty` session
 Controller sends this command an administrator requests to start an `rtty` session with the AP. 
-```json
+```
 {    "jsonrpc" : "2.0" , 
      "method" : "remote_access" , 
      "params" : {
@@ -780,7 +580,7 @@ Controller sends this command an administrator requests to start an `rtty` sessi
 ```
 
 The device should answer:
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "result" : {
           "serial" : <serial number> ,
@@ -793,234 +593,7 @@ The device should answer:
     "id" : <same number>
 }
 ```
-
-#### Controller wants to ping the device
-Controller sends this command when it tries to establish latency to the device.
-```json
-{    "jsonrpc" : "2.0" , 
-     "method" : "ping" , 
-     "params" : {
-	        "serial" : <serial number>
-     },
-     "id" : <some number>
-}
-```
-
-The device should answer:
-```json
-{     "jsonrpc" : "2.0" , 
-      "result" : {
-              "serial" : <serial number> ,
-              "uuid" : <uuid of the current active configuration>,
-              "deviceUTCTime" : <UTC Time on device in milliseconds>
-            },
-      "id" : <same number>
-}
-```
-
-#### Controller wants the device to perform a script
-Controller sends this command to run a predefined script. Extreme care must be taken.
-```json
-{    "jsonrpc" : "2.0" , 
-     "method" : "script" , 
-     "params" : {
-        "serial" : <serial number>,
-        "type" : <one of "shell", "ucode", "bundle">,
-        "script" : <text blob containing the script, This must be vase64 encoded>,
-        "timeout" : <max timeout in seconds, default is 30, unused if URI is supplied>,
-        "uri":  "<upload script results using this URI>",
-        "signature" : "<signature for script>: must be supplied to restricted devices",
-        "when" : <time when this will be performed as UTC seconds>
-     },
-     "id" : <some number>
-}
-```
-
-The device should answer:
-```json
-{     "jsonrpc" : "2.0" , 
-      "result" : {
-          "serial" : <serial number> ,
-          "status" : {
-            "error" : <0 or the value of $? from the shell running the command, 255 signifies a timeout>,
-	    one of either
-	    	"result_64" : <gzipped base64 result of running the command>,
-	    	"result_sz" : <size of unzipped content>
-	    or 
-	    	"result" : <a single text blob of the result>
-          }
-      },
-  "id" : <same number>
-}
-```
-
-#### Controller wants the device to replace its certificates
-Controller sends this command to run a predefined script. Extreme care must be taken.
-```json
-{    "jsonrpc" : "2.0" , 
-     "method" : "certupdate" , 
-     "params" : {
-        "serial" : <serial number>,
-        "certificates" : <BASE64 encoded tar file of the cert package from the certificate portal>
-     },
-     "id" : <some number>
-}
-```
-
-The device should answer:
-```json
-{     "jsonrpc" : "2.0" , 
-      "result" : {
-          "serial" : <serial number> ,
-          "status" : {
-            "error" : <0 or the value of $? from the shell running the command, 255 signifies a timeout>,
-            "txt" : <text describing the error or success>
-      },
-  "id" : <same number as request>
-}
-```
-
-#### Controller wants the device to perform re-enrollment
-Controller sends this command to trigger re-enrollment, i.e. update of operational certificate. Extreme care must be taken.
-```json
-{    "jsonrpc" : "2.0" , 
-     "method" : "reenroll" , 
-     "params" : {
-        "serial" : <serial number>,
-        "when" : Optional - <UTC time when to apply this config, 0 mean immediate, this is a suggestion>
-     },
-     "id" : <some number>
-}
-```
-
-The device should answer:
-```json
-{     "jsonrpc" : "2.0" , 
-      "result" : {
-          "serial" : <serial number> ,
-          "status" : {
-            "error" : <0 or the value of $? from the shell running the command, 255 signifies a timeout>,
-            "txt" : <text describing the error or success>
-      },
-  "id" : <same number as request>
-}
-```
-
-#### Controller wants the device to switch to another controller
-Controller sends this when the device should change the controller it connects to without looking up a new redirector.
-
-```json
-{    "jsonrpc" : "2.0" , 
-     "method" : "transfer" , 
-     "params" : {
-        "serial" : <serial number>,
-        "server" : <controller hostname>,
-        "port" : <controller port number (integer)>,
-     },
-     "id" : <some number>
-}
-```
-
-The device should answer:
-```json
-{     "jsonrpc" : "2.0" , 
-      "result" : {
-          "serial" : <serial number> ,
-          "status" : {
-            "error" : <0 or the value of $? from the shell running the command, 255 signifies a timeout>,
-            "txt" : <text describing the error or success>
-      },
-  "id" : <same number as request>
-}
-```
-
-### RRM AP device commands
-The following command is used to send RRM commands to an AP. RRM commands are send to an AP, however the 
-controller will not or cannot verify if they have been sent or the action was performed.
-
-```json
-{    "jsonrpc" : "2.0" , 
-     "method" : "rrm" , 
-     "params" : {
-        "serial" : <serial number>,
-        "actions" : [ array of actions. Each possible action is defined next]
-     },
-     "id" : <some number>
-}
-```
-
-The device should answer:
-```json
-{     "jsonrpc" : "2.0" , 
-      "result" : {
-          "serial" : <serial number> ,
-          "status" : {
-            "error" : <0 or the value of $? from the shell running the command, 255 signifies a timeout>,
-            "txt" : <text describing the error or success>
-      },
-  "id" : <same number as request>
-}
-```
-
-#### RRM Roam action
-
-##### Kick
-```json
-{     
-      "action" : "kick" ,
-      "addr" : <mac if the client that shall be kicked> ,
-      "reason": <number>, (default: 5, https://www.cisco.com/assets/sol/sb/WAP371_Emulators/WAP371_Emulator_v1-0-1-5/help/Apx_ReasonCodes2.html)
-      "ban_time": <number> (seconds, optional)
-}
-```
-
-##### Channel Switch Announcement
-```json
-{   
-    "action" : "channel_switch" ,
-    "bssid" : <mac of the SSID> , (all other SSIDs on the same radio will perform the same action)
-    "channel" : <number> (HT/HW mode will be retained upon issuing the CSA)
-}
-```
-
-##### Change TX-Power
-```json
-{   
-    "action" : "tx_power" ,
-    "bssid" : <mac of the SSID> , (all other SSIDs on the same radio will perform the same action)
-    "level" : <number> (DBm inside the positive number space)
-}
-```
-
-##### Beacon Scan
-```json
-{   
-    "action" : "beacon_request" ,
-    "addr" : <mac if the client that shall perform the scan> ,
-    "ssid": <string>, (the SSID the client shall scan for on all frequencies),
-    "channel": <number> (the channel that shall be scanned)
-}
-```
-
-##### BSS Transition
-```json
-{   
-    "action" : "bss_transition" ,
-    "addr" : <mac if the client that shall perform the roam> ,
-    "neighbors": [ <string> ], (an array of BSSIDs the client shall consider as roamin candidates)
-}
-```
-
-##### Update neighbours
-```json
-{   
-    "action" : "neighbors" ,
-    "bssid" : <mac of the SSID> , (the SSID of the specific VAP)
-    "neighbors": [ [ <BSS>, <ssid>, <neighbor report> ] ]
-}
-```
-
-### `rtty server`
+#### `rtty server`
 More information about the [rtty server](https://github.com/zhaojh329/rtty) can be found here.
 
 ### Message compression
@@ -1031,48 +604,21 @@ Should other messages get larger, the client may decide to compress the. Only me
 
 #### Identifying a compressed message
 A compressed message has a single member to the `params` field. It's only parameter must be called `compress_64`. Any other elements under
-params will be dropped. Additional compression schemes may be developed later. The device should also include 
-a hint to the actual size of the uncompressed data. This would allow listeners to create sufficiently sized 
-buffers right away instead of guessing. If the device includes `compressed_sz` as the second field in the 
-params objects. This should be an unsigned int representing the total size of the uncompressed data. 
+params will be dropped. Additional compression schemes may be developed later.
 
 #### How to compress
 The original `params` element should be run through `zlib:compress` and then encoded using base64, and passed as a string. Here is an example
 of the completed message. The following should how the `state` event could be compressed:
 
-```json
+```
 {   "jsonrpc" : "2.0" , 
     "method" : "state" , 
     "params" : {
-	    "compress_64" : "kqlwhfoihffhwleihfi3uhfkjehfqlkwhfqkhfiu3hffhkjwehfqkwjehfqwiefkjehq.....qwjqkfhqjwk",
-        "compress_sz" : 212322
+	    "compress_64" : "kqlwhfoihffhwleihfi3uhfkjehfqlkwhfqkhfiu3hffhkjwehfqkwjehfqwiefkjehq.....qwjqkfhqjwk"
   }
 }
 ```
 
-### 'Radius Proxying'
-The gateway can receive RADIUS messages from the device and forward them. It can also receive messages
-on its behalf and send them to the device.
-
-```json
-{
-    "radius" : <type, can be auth, acct, coa> ,
-    "data" : <base 64 encoded raw RADIUS payload>
-}
-```
-
-The GW will include a TLV to mark the sender MAC. The RADIUS server must use the same TLV to
-identify the destination for its messages.
-
-#### Incoming RADIUS messages configuration
-The GW must be configured with the following:
-
-```asm
-radius.proxy.enable = true
-radius.proxy.accounting.port = 1813
-radius.proxy.authentication.port = 1812
-radius.proxy.coa.port = 3799
-```
 
 
 

README.md

@@ -1,36 +1,180 @@
-<p align="center">
-    <img src="images/project/logo.svg" width="200" alt="OpenWiFi Project"/>
-</p>
+# uCentralGW
 
-# OpenWiFI Gateway (OWGW)
-
-## What is it?
-The OpenWiFi Gateway is a service for the TIP OpenWiFi CloudSDK (OWSDK). 
-OWGW manages Access Points that implement the OpenWiFi uCentral protocol. OWGW, like all other OWSDK microservices, is
-defined using an OpenAPI definition and uses the ucentral communication protocol to interact with Access Points. To use 
-the OWGW, you either need to [build it](#building) or use the [Docker version](#docker).
+## What is this?
+The uCentralGW is an added service for the TIP controller that allows integration with the 
+uCentral protocol. It supports a complete OpenAPI definition and uses the ucentral communication protocol. To use the uCentralGW,
+you either need to [build it](#building) or use the [Docker version](#docker).
 
 ## Building
-To build the microservice from source, please follow the instructions in [here](./BUILDING.md)
+In order to build the uCentralGW, you will need to install its dependencies, which includes the following:
+- cmake
+- boost
+- POCO 1.10.1 or later
+- a C++17 compiler
+- libyaml
+- openssl
+- libpq-dev (PortgreSQL development libraries)
+- mysql-client (MySQL client)
+- librdkafka
+- cppkafka
 
-## Docker
-To use the CLoudSDK deployment please follow [here](https://github.com/Telecominfraproject/wlan-cloud-ucentral-deploy)
+The build is done in 2 parts. The first part is to build a local copy of the framework tailored to your environment. This 
+framework is called [Poco](https://github.com/pocoproject/poco). The version used in this project has a couple of fixes
+from the master copy needed for cmake. Please use the version of this [Poco fix](https://github.com/stephb9959/poco). Building 
+Poco may take several minutes depending on the platform you are building on.
+
+### Ubuntu
+These instructions have proven to work on Ubuntu 20.4.
+```
+sudo apt install git cmake g++ libssl-dev libmariadb-dev unixodbc-dev 
+sudo apt install libpq-dev libaprutil1-dev apache2-dev libboost-all-dev
+sudo apt install librdkafka-dev liblua5.3-dev libmysqlclient-dev
+
+git clone https://github.com/stephb9959/poco
+cd poco
+mkdir cmake-build
+cd cmake-build
+cmake ..
+cmake --build . --config Release
+sudo cmake --build . --target install
+
+git clone https://github.com/stephb9959/cppkafka
+cd cppkafka
+mkdir cmake-build
+cd cmake-build
+cmake ..
+cmake --build . --config Release
+sudo cmake --build . --target install
+
+cd ~
+git clone https://github.com/Telecominfraproject/wlan-cloud-ucentralgw
+cd wlan-cloud-ucentralgw
+mkdir cmake-build
+cd cmake-build
+cmake ..
+make
+```
+
+### Fedora
+The following instructions have proven to work on Fedora 33
+```
+sudo yum install cmake g++ openssl-devel unixODBC-devel mysql-devel mysql apr-util-devel boost boost-devel
+sudo yum install yaml-cpp-devel lua-devel 
+sudo dnf install postgresql.x86_64 librdkafka-devel
+sudo dnf install postgresql-devel
+
+git clone https://github.com/stephb9959/poco
+cd poco
+mkdir cmake-build
+cd cmake-build
+cmake ..
+cmake --build . --config Release
+sudo cmake --build . --target install
+
+git clone https://github.com/stephb9959/cppkafka
+cd cppkafka
+mkdir cmake-build
+cd cmake-build
+cmake ..
+cmake --build . --config Release
+sudo cmake --build . --target install
+
+cd ~
+git clone https://github.com/Telecominfraproject/wlan-cloud-ucentralgw
+cd wlan-cloud-ucentralgw
+mkdir cmake-build
+cd cmake-build
+cmake ..
+make
+
+```
+ 
+### OSX Build
+The following instructions have proven to work on OSX Big Sur. You need to install [Homebrew](https://brew.sh/). You must also have installed [XCode for OS X](https://www.freecodecamp.org/news/how-to-download-and-install-xcode/).
+```
+brew install openssl
+brew install cmake
+brew install libpq
+brew install mysql-client
+brew install apr
+brew install apr-util
+brew install boost
+brew install yaml-cpp
+brew install postgresql
+brew install unixodbc
+brew install librdkafka
+
+git clone https://github.com/stephb9959/poco
+cd poco
+mkdir cmake-build 
+cd cmake-build
+cmake ..
+cmake --build . --config Release -j
+sudo cmake --build . --target install
+
+git clone https://github.com/stephb9959/cppkafka
+cd cppkafka
+mkdir cmake-build
+cd cmake-build
+cmake ..
+cmake --build . --config Release
+sudo cmake --build . --target install
+
+cd ~
+git clone https://github.com/Telecominfraproject/wlan-cloud-ucentralgw
+cd wlan-cloud-ucentralgw
+mkdir cmake-build
+cd cmake-build
+cmake ..
+make -j
+```
+
+### Raspberry
+The build on a rPI takes a while. You can shorten that build time and requirements by disabling all the larger database 
+support. You can build with only SQLite support by not installing the packages for ODBC, PostgreSQL, and MySQL by 
+adding -DSMALL_BUILD=1 on the cmake build line.
+
+```
+sudo apt install git cmake g++ libssl-dev libaprutil1-dev apache2-dev libboost-all-dev libyaml-cpp-dev
+git clone https://github.com/stephb9959/poco
+cd poco
+mkdir cmake-build
+cd cmake-build
+cmake ..
+cmake --build . --config Release
+sudo cmake --build . --target install
+
+cd ~
+git clone https://github.com/Telecominfraproject/wlan-cloud-ucentralgw
+cd wlan-cloud-ucentralgw
+mkdir cmake-build
+cd cmake-build
+cmake -DSMALL_BUILD=1 ..
+make
+```
+
+### After completing the build
+After completing the build, you can remove the Poco source as it is no longer needed. 
 
 #### Expected directory layout
 From the directory where your cloned source is, you will need to create the `certs`, `logs`, and `uploads` directories.
-```bash
+```shell
 mkdir certs
 mkdir certs/cas
 mkdir logs
 mkdir uploads
 ```
+
 You should now have the following:
-```text
---+-- certs
+
+```
+-- cert_scripts
+  |
+  +-- certs
   |   +--- cas
   +-- cmake
   +-- cmake-build
-  +-- logs
+  +-- logs (dir)
   +-- src
   +-- test_scripts
   +-- openapi
@@ -39,16 +183,12 @@ You should now have the following:
 ```
 
 ### Certificates
-The OWGW uses a number of certificates to provide security. There are 2 types of certificates required for 
-a normal deployment:
-- A Server Certificate to secure the OWGW<->AP channel
-- A REST API Certificate to secure the Northbound API
-- Device Certificates
+Love'em of hate'em, we gotta use'em. So we tried to make this as easy as possible for you. 
 
 #### The `certs` directory
 For all deployments, you will need the following certs directory, populated with the proper files.
 
-```text
+```asm
 certs ---+--- root.pem
          +--- issuer.pem
          +--- websocket-cert.pem
@@ -63,69 +203,183 @@ certs ---+--- root.pem
 ```
 
 #### DigiCert files
-These are the files you should install on your OWGW and devices. For your OWGW, you will need to provide tge following files in the directory above
+These are the files you should install on your gateway and devices. For your gateway, you will need to provide tge following files in the directory above
 - `root.pem` is [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/root.pem).
 - `issuer.pem` is [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/issuer.pem).
 - `clientcas.pem` is [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/clientcas.pem).
 
-#### OWGW Server certificate (must be obtained from TIP)
+#### Gateway certificates: TIP portion (* must be obtained from TIP)
 The gateway requires its own DigiCert certificate. Once obtained, you need to identify the `key` and the `certificate` rename
 them `websocket-key.pem` and `websocket-cert.pem`, and copy them in your `certs` directory. These files mus be obtained from TIP.
 
-#### OWGW for certificate: for REST API (from your favourite Certificate Provider)
-The gateway requires a key/certificate/ca for the REST interface. These files you need to obtain on your own or generate them. This is beyond the scope of this 
-document. You, may choose to select LestEncrypt or any other Certificate Authority. Once you have these files, you need to renamed them `restapi-key.pem`, `restapi-cert.pem`, and `restapi-ca.pem`. 
-This will guarantee proper HTTPS in your browser and RESTAPI. 
+#### Gateway certificates: for REST API
+The gateway requires a key/vertificate/ca for the REST interface. These files you need to obtain on your own of generate them. This is beyond the scope of this 
+document. Once you have these files, you need to renamed them `restapi-key.pem`, `restapi-cert.pem`, and `restapi-ca.pem`. This will guarantee proper HTTPS
+in your browner 
 
-### OpenWiFi Device certificates
-This may have already done at the factory. If not, you will need to get the following in order to point your devices to use the OWGW:
+#### Configuration
+The configuration for this service is kept in a properties file. This file is called `owgw.properties` and you can 
+see the latest version [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/owgw.properties). The file will be loaded from
+the directory set by the environment variable `UCENTRALGW_CONFIG`. To use environment variables in the configuration,
+you must use `$<varname>`. Only `path names` support the use of environment variables. The sample configuration requires very 
+little changes if you keep the suggested directory structure. For the sample configuration to work, you need to define 2 
+environment variables. 
+```
+export OWGW_ROOT=`pwd`
+export UCENTRALGW_CONFIG=`pwd`
+```
+If you current working directory is the root of the project, this will set the variables properly. Otherwise, you can set the variables 
+to point to wherever is necessary.
+
+##### Important config entries
+###### This is the logging directory
+```
+logging.channels.c2.path = $OWGW_ROOT/logs/sample.log
+```
+
+###### This is the type of storage in use
+```asm
+storage.type = sqlite
+```
+
+###### Autoprovisioning settings
+```asm
+openwifi.autoprovisioning = true
+openwifi.devicetypes.0 = AP:linksys_ea8300,edgecore_eap101,linksys_e8450-ubi
+openwifi.devicetypes.1 = SWITCH:edgecore_ecs4100-12ph
+openwifi.devicetypes.2 = IOT:esp32
+```
+
+###### This is the RESTAPI endpoint
+
+```asm
+openwifi.restapi.host.0.backlog = 100
+openwifi.restapi.host.0.security = relaxed
+openwifi.restapi.host.0.rootca = $OWGW_ROOT/certs/restapi-ca.pem
+openwifi.restapi.host.0.address = *
+openwifi.restapi.host.0.port = 16002
+openwifi.restapi.host.0.cert = $OWGW_ROOT/certs/restapi-cert.pem
+openwifi.restapi.host.0.key = $OWGW_ROOT/certs/restapi-key.pem
+openwifi.restapi.host.0.key.password = mypassword
+```
+
+##### This is the end point for the devices to connect with
+This is the crucial section. I bet that 97.4% of all your problems will come from here, and it's boring. So put some good music on, 
+give the kids the iPad, get a cup of coffee, and pay attention. Every field will be explained.
+
+###### ucentral.websocket.host.0.backlog
+This is the number of concurrent devices you are expecting to call all at once. Not the current number of devices. This is how many will connect in the same exact second. 
+Take the total number of devices you have and divide by 100. That's a good rule of thumb. Never go above 500.
+
+###### ucentral.websocket.host.0.rootca
+This is the root file as supplied by Digicert. You can find it [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/root.pem) 
+
+###### ucentral.websocket.host.0.issuer
+This is the issuer file as supplied by Digicert. You can find it [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/issuer.pem)
+
+###### ucentral.websocket.host.0.cert
+This is a `pem` file that you will receive from Digicert for the gateway itself. This is the certificate for the gateway. 
+
+###### ucentral.websocket.host.0.key
+This is a `pem` file that you will receive from Digicert for the gateway itself. The is the private key for the gateway.
+
+###### ucentral.websocket.host.0.clientcas
+This is a `pem` file that contains both the issuer and the root CA certificates. You can find it You can find it [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/clientcas.pem)
+
+###### ucentral.websocket.host.0.cas
+This is a directory where you will copy your own `cert.pem`, the `root.pem`, and the `issuer.pem` files.
+
+###### ucentral.websocket.host.0.address
+Leve this a `*` in teh case you want to bind to all interfaces on your gateway host or select the address of a single interface.
+
+###### ucentral.websocket.host.0.port
+Leave to 15002 for now. 
+
+###### ucentral.websocket.host.0.security
+Leave this as strict for now for devices.
+
+###### ucentral.websocket.host.0.key.password
+If you key file uses a password, please enter it here.
+
+###### ucentral.websocket.maxreactors
+A single reactor can handle between 1000-2000 devices. Never leave this smaller than 5 or larger than 50.
+
+#### Conclusion 
+You will need to get the `cert.pem` and `key.pem` from Digicert. The rest is here.
+
+```asm
+ucentral.websocket.host.0.backlog = 500
+ucentral.websocket.host.0.rootca = $OWGW_ROOT/certs/root.pem
+ucentral.websocket.host.0.issuer = $OWGW_ROOT/certs/issuer.pem
+ucentral.websocket.host.0.cert = $OWGW_ROOT/certs/websocket-cert.pem
+ucentral.websocket.host.0.key = $OWGW_ROOT/certs/websocket-key.pem
+ucentral.websocket.host.0.clientcas = $OWGW_ROOT/certs/clientcas.pem
+ucentral.websocket.host.0.cas = $OWGW_ROOT/certs/cas
+ucentral.websocket.host.0.address = *
+ucentral.websocket.host.0.port = 15002
+ucentral.websocket.host.0.security = strict
+ucentral.websocket.host.0.key.password = mypassword
+ucentral.websocket.maxreactors = 20
+```
+
+###### This is the end point for the devices when uploading files
+```asm
+openwifi.fileuploader.host.0.backlog = 100
+openwifi.fileuploader.host.0.rootca = $OWGW_ROOT/certs/restapi-ca.pem
+openwifi.fileuploader.host.0.security = relaxed
+openwifi.fileuploader.host.0.address = *
+openwifi.fileuploader.host.0.name = 192.168.1.176
+openwifi.fileuploader.host.0.port = 16003
+openwifi.fileuploader.host.0.cert = $OWGW_ROOT/certs/restapi-cert.pem
+openwifi.fileuploader.host.0.key = $OWGW_ROOT/certs/restapi-key.pem
+openwifi.fileuploader.host.0.key.password = mypassword
+openwifi.fileuploader.path = $OWGW_ROOT/uploads
+openwifi.fileuploader.maxsize = 10000
+```
+
+###### host.0.address entries
+If you want to limit traffic to a specific interface, you should specify the IP address of that interface instead of 
+the `*`. Using the `*` means all interfaces will be able to accept connections. You can add multiple interfaces 
+by changing the `0` to another index. You need to repeat the whole configuration block for each index. Indexes must be sequential
+start at `0`.
+
+###### openwifi.fileuploader.host.0.name
+This must point to the IP or FQDN of your uCentralGW.
+
+#### Running the gateway
+Tu run the gateway, you must run the executable `ucentralgw`. You can use several command line options to run as a daemon or specify the configuration file location. 
+
+#### Device configuration
+Once you have the gateway configured, you will need to have some devices coming to it. For now, you will need to get
+the following in order to use the gateway:
 - A DigiCert certificate that you will call `cert.pem`
 - A DigiCert key that goes with that certificate. Please call this `key.pem`
 - The Digicert root certificate that you will find [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/certificates/root.pem). You must copy `root.pem`
-  and rename it `cas.pem` on the device.
+and rename it `cas.pem` on the device.
 - A Device ID file called `dev-id` or something similar
 - Copy all the 4 files to the `/certificates` directory of the AP (you must have firmware created Jun 15th or later).
 
-You will need to upgrade your device to the latest firmware. Once updated, you will need to copy the 4 files mentioned above in
-the `/certificates` directory. Please remove all old keys or certificates from the `/etc/ucentral` directory
+You will need to upgrade your device to the latest firmware. Once updated, you will need to copy the 4 files mentioned above in 
+the `/certificates` directory. Please remove all old keys or certificates from the `/etc/ucentral` directory 
 (anything ending in `.pem`).
 
-### Environment variables
-The following environment variables should be set from the root directory of the service. They tell the OWGW process where to find 
-the configuration and the root directory.
-```bash
-export OWGW_ROOT=`pwd`
-export OWGW_CONFIG=`pwd`
+#### Server key entry
+The gateway needs to encrypt information from time to time. In order to do so, it must have a crypto key. This key
+can be any of the keys you are already using. You must keep that keep secret and always use it. In the configutation,
+this is the entry
+
+```asm
+openwifi.service.key = $OWGW_ROOT/certs/websocket-key.pem
 ```
-You can run the shell script `set_env.sh` from the microservice root.
-
-### OWGW Service Configuration
-The configuration is kept in a file called `owgw.properties`. To understand the content of this file, 
-please look [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/master/CONFIGURATION.md)
-
-### Running the OWGW
-Tu run the OWGW, you must run the executable `owgw`. You can use several command line options to run as a daemon or 
-specify the configuration file location.
-
-### systemd: owgw.service
-`owgw.service` is a skeleton to allow to run the OWGW in a systemd based operating system (i.e. Debian). You will need 
-to modify slightly to reflect your environment.
-
-### Default device configuration
-By default, the devices will receive a built-in default configuration. This built-in default configuration is probably not what you need. 
-So there are 2 options in order to specify your own default configuration:
-- In the OWGW data directory, you can create a `default_config.json` file that contains your own personal configuration
-- Using the OWGW UI, on the left hand pane, there is a `configurations` choice. There you can do the same but apply it with more granularity ot each device type 
-you may be deploying.
-
-### Command line options
+ 
+#### Command line options
 The current implementation supports the following. If you use the built-in configuration file, you do not need to use any command-line
 options. However, you may decide to use the `--daemon` or `umask` options. 
 
 ```bash
-./owgw --help
-usage: owgw OPTIONS
-A owgw gateway implementation for TIP.
+./ucentralgw --help
+usage: ucentralgw OPTIONS
+A uCentral gateway implementation for TIP.
 
 --daemon        Run application as a daemon.
 --umask=mask    Set the daemon's umask (octal, e.g. 027).
@@ -136,27 +390,119 @@ A owgw gateway implementation for TIP.
 --logs=dir      specify the log directory and file (i.e. dir/file.log)
 ```
 
-#### file
-This allows you to point to another file without specifying the OWGW_CONFIG variable. The file name must end in `.properties`.
-#### daemon
+##### file
+This allows you to point to another file without specifying the UCENTRALGW_CONFIG variable. The file name must end in `.properties`.
+##### daemon
 Run this as a UNIX service
-#### pidfile
+##### pidfile
 When running as a daemon, the pid of the running service will be set in the speficied file
-#### debug
+##### debug
 Run the service in debug mode.
-#### logs
+##### logs
 Speficy where logs should be kept. You must include an existing directory and a file name. For example `/var/ucentral/logs/log.0`.
-#### umask
+##### umask
 Seet the umask for the running service.
 
-## Docker
-If you would rather launch the docker-compose or helm for the controller, please click [here](https://github.com/Telecominfraproject/wlan-cloud-ucentral-deploy).
+### ALB Support
+Support for AWS ALB is provided through the following configuration elements
+```asm
+alb.enable = true
+alb.port = 16102
+```
+
+### Docker
+So building this thing from scratch is not your thing? I can't blame you. It takes some patience and 
+in the end, there's still more work. Here comes `docker` to the rescue. You can run a docker version following
+these instructions. The following is the content of the `docker_run.sh` script you can find
+[here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/docker_run.sh):
+
+```bash
+#!/bin/sh
+
+HUBNAME=tip-tip-wlan-cloud-ucentral.jfrog.io
+IMAGE_NAME=ucentralgw
+DOCKER_NAME=$HUBNAME/$IMAGE_NAME
+
+CONTAINER_NAME=ucentralgw
+
+#stop previously running images
+docker container stop $CONTAINER_NAME
+docker container rm $CONTAINER_NAME --force
+
+if [[ ! -d logs ]]
+then
+    mkdir logs
+fi
+
+if [[ ! -d certs ]]
+then
+  echo "certs directory does not exist. Please create and add the proper certificates."
+  exit 1
+fi
+
+if [[ ! -f owgw.properties ]]
+then
+  echo "Configuration file owgw.properties is missing in the current directory"
+  exit 2
+fi
+
+docker run -d -p 15002:15002 \
+              -p 16002:16002 \
+              -p 16003:16003 \
+              --init \
+              --volume="$PWD:/ucentral-data" \
+              -e UCENTRAL_ROOT="/ucentral-data" \
+              -e UCENTRALGW_CONFIG="/ucentral-data" \
+              --name="ucentralgw" $DOCKER_NAME
+
+```
+
+Create yourself a directory and copy that script which you can also get from [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/docker_run.sh).
+You must have the basic configuration file copied in the directory. This file must be called `owgw.properties`. You can bring your own or
+copy it from [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/owgw.properties). Please look at [this](#certificates-with-docker) to have the right 
+certificates. You need to make sure that the names match the content of the `owgw.properties`
+file. Once all this is done, you can simply run `docker_run.sh`.
+
+#### Docker installation directory layout
+Here is the layout expected for your Docker installation
+
+```asm
+Run-time root
+    |
+    ----- certs (same as above)
+    +---- logs  (dir)
+    +---- uploads  (dir)
+    +---- owgw.properties (file)
+```
+
+#### `owgw.properties` for Docker
+If you use the pre-made configuration file, and you follow the directory layout, the only line you must change 
+is the following line:
+
+```asm
+openwifi.fileuploader.host.0.name = 192.168.1.176
+```
+
+This line should reflect the IP of your gateway or its FQDN. You must make sure that this name or IP is accessible
+from your devices. This is used during file uploads from the devices.
+
+#### Certificates with Docker
+Please refer to the `certs` directory from the sections above.
+
+#### Configuration with Docker
+The configuration for this service is kept in a properties file. Currently, this configuration file must be kept in the 
+current directory of uCentral or one level up. This file is called `owgw.properties` and you can see the latest version
+[here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/owgw.properties). The file will be loaded from 
+the directory set by the environment variable `UCENTRALGW_CONFIG`. To use environment variables in the configuration,
+you must use `$<varname>`. The path for the logs for the service must exist prior to starting the 
+service. The path is defined under `logging.channels.c2.path`. Only `path names` support the use of 
+environment variables. Here is a sample configuration:
 
 ## uCentral communication protocol
-The communication protocol between the device and the OGWG is detailed in this [document](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/PROTOCOL.md).
+The communication protocol between the device and the controller is detailed in this [document](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/PROTOCOL.md).
 
 ## OpenAPI
-The OWGW supports an OpenAPI REST based interface for management. You can find the [definition here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/openapi/ucentral/owgw.yaml).
+The service supports an OpenAPI REST based interface for management. You can find the [definition here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/openapi/ucentral/ucentral.yaml).
 And here is [how to use it](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/OPENAPI.md)
 
 ## Using the API
@@ -166,31 +512,33 @@ or [python](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/ma
 More scripts will be added in the future.
 
 ## Firewall Considerations
-| Port | Description | Configurable |
-| :--- | :--- |:------------:|
-| 15002 | Default port from the devices to the OWGW |     yes      |
-| 16002 | Default port for REST API Access to the OWGW |     yes      |
-| 5912 | Default port for RTTY connection |     yes      |
-| 5913 | Defailt port for RTTY connection |     yes      |
+- The protocol uses TCP port 15002 between the devices and the gateway. This port must be opened.
+- Devices use the TCP port 16003 to upload files. This port is configurable in the `owgw.properties` file. Look for `openwifi.fileuploader.host.0.port`.
+- The RESTAPI is accessed through TCP port 16002 by default. This port is configurable in the `owgw.properties` file. Look for the entry `openwifi.restapi.host.0.port`.
 
-## Kafka topics
+## Kafka integration
+So what about Kafka? Well, the gateway has basic integration with Kafka. It is turned off by default, to turn it on, in the configuration:
+
+```asm
+openwifi.kafka.enable = false
+openwifi.kafka.brokerlist = 127.0.0.1:9092
+openwifi.kafka.commit = false
+openwifi.kafka.queue.buffering.max.ms = 50
+```
+
+#### `openwifi.kafka.enable`
+Kind of obvious but hey, set `true` or `false`. Default is `false`
+
+#### `openwifi.kafka.brokerlist`
+This is a comma separator list of the brokers in your `kafka` deployment. 
+
+#### Kafka topics
 Toe read more about Kafka, follow the [document](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/main/KAFKA.md)
 
-## Contributions
-We need more contributors. Should you wish to contribute, 
-please follow the [contributions](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/master/CONTRIBUTING.md) document.
+#### Securing `kafka`
+This is beyond the scope of this document. As it stands today, the communication between the gateway and `kafka` is expected to be behind a firewall.
 
-## Pull Requests
-Please create a branch with the Jira addressing the issue you are fixing or the feature you are implementing. 
-Create a pull-request from the branch into master. 
-
-## Additional OWSDK Microservices
-Here is a list of additional OWSDK microservices
-| Name | Description | Link | OpenAPI |
-| :--- | :--- | :---: | :---: |
-| OWSEC | Security Service | [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralsec) | [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralsec/blob/main/openpapi/owsec.yaml) |
-| OWGW | Controller Service | [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw) | [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/master/openapi/owgw.yaml) |
-| OWFMS | Firmware Management Service | [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralfms) | [here](https://github.com/Telecominfraproject/wlan-cloud-ucentralfms/blob/main/openapi/owfms.yaml) |
-| OWPROV | Provisioning Service | [here](https://github.com/Telecominfraproject/wlan-cloud-owprov) | [here](https://github.com/Telecominfraproject/wlan-cloud-owprov/blob/main/openapi/owprov.yaml) |
-| OWANALYTICS | Analytics Service | [here](https://github.com/Telecominfraproject/wlan-cloud-analytics) | [here](https://github.com/Telecominfraproject/wlan-cloud-analytics/blob/main/openapi/owanalytics.yaml) |
-| OWSUB | Subscriber Service | [here](https://github.com/Telecominfraproject/wlan-cloud-userportal) | [here](https://github.com/Telecominfraproject/wlan-cloud-userportal/blob/main/openapi/userportal.yaml) |
+## Contributors
+We love ya! We need more of ya! If you want to contribute, make sure you review 
+the [coding style](https://github.com/Telecominfraproject/wlan-cloud-ucentralgw/blob/master/CODING_STYLE.md) document. 
+Feel free to ask questions and post issues. 

RESTRICTED_DEVICES.md

@@ -1,82 +0,0 @@
-# Restricted devices
-
-## What is a restricted device?
-A restricted device is one that because of regulations or a desire for utmost security, requires signatures to access restricted or blocked 
-features. The restriction process is burnt in the device at manufacturing or later by running a specific command on the device. Once a device
-is restricted, it cannot be unlocked. 
-
-## Current restrictions
-Restrictions are stored on the AP in a protected partition. They are contained in a file called `restrictions.json`. Here is a sample:
-```json
-{
-        "country": [
-                "US", "CA"
-        ],
-        "dfs": true,
-        "rtty": true,
-        "tty": true,
-        "developer": true,
-        "sysupgrade": true,
-        "commands": true,
-        "key_info": {
-                "vendor": "dummy",
-                "algo": "static"
-        }
-}
-```
-- country
-  - List of countries where this device may be used
-- dfs
-  - Disallow DFS Override during wifi-scan. If set to `true`, device will not allow to override DFS channels
-- rtty
-  - Disallow the use of the RTTY command for this device
-- tty
-  - Do not allow the AP to accept `tty` connection
-- developer
-  - Internal use only.
-- sysupgrade
-  - If set to `true`, only signed firmware upgrade command will be allowed.
-- commands
-  - If set to `true`, do not allow commands.
-- key_info
-  - This structure defines how signatures should be generated and verified in a secure system
-    - vendor
-      - An identified that must match the vendor name provided in the controller
-    - algo
-      - The signature algorithm. Here are the supported algorithms
-        - `static`
-          - A test algorithm that always returns and uses a value of `aaaaaaaaaa`. This should never be used in the field.
-        - `dgst-sha256`
-          - The default OpenSSL RSA signature generation and verification. The controller will use the following command to generate the signature
-          ```sh
-          openssl dgst -sha256 -sign private-key.pem -out signature.txt myfile
-          ```
-          - The AP will be using the following to verify the signature
-          ```sh
-          openssl dgst -sha256 -verify public-key.pem -signature signature.txt myfile
-          ```
-
-## Creating signatures on the controller
-When a device is restricted and a signature is required, the controller can generate the signature 
-for the specified `vendor`. However, on the controlelr side, you must configure the vendors. In
-order to do so we suggest the following.
-- Create a directory called `signatures` under your `certs` directory
-- Copy the public and private keys for each `vendor` name. We suggest naming them accordingly
-  - `vendor`-private-key.pem
-  - `vendor`-public-key.pem
-- In the `owgw.properties` file, you need to declare these signatures the following way
-```properties
-    signature.manager.0.key.public = $OWGW_ROOT/certs/signatures/test1-public-key.pem
-    signature.manager.0.key.private = $OWGW_ROOT/certs/signatures/test1-private-key.pem
-    signature.manager.0.vendor = test1
-    
-    signature.manager.1.key.public = $OWGW_ROOT/certs/signatures/test2-public-key.pem
-    signature.manager.1.key.private = $OWGW_ROOT/certs/signatures/test2-private-key.pem
-    signature.manager.1.vendor = test2
-```
-
-## How do you use the signatures?
-There is nothing to do really. Now the controller will use the proper key to create the signatures 
-when it sends commands to the AP. It will use the algorithm that the device understands too. This is transparent 
-to the user. The `vendor` name used in the controller configuration must match the `vendor` name provided in the 
-`restrictions.json` file.

ap_scripts/Author 1/content.yaml

@@ -1,36 +0,0 @@
-
-scripts:
-  - name: List Antennas
-    description: A script to list all antennas on a device
-    type: shell
-    runtype:
-      timeout: 30
-    filename: listantennas.sh
-    readme: listantennas.md
-    help: https://authors.com/scripts/index.html
-  - name: List AP Noise
-    description: A script to list all noise values on all APs
-    type: shell
-    runtype:
-      deferred: true
-    filename: listnoise.sh
-    readme: listnoise.md
-    help: https://authors.com/scripts/index.html
-  - name: Reset AP Statistics
-    description: A script to reset the statistics on a given AP
-    type: shell
-    runtype:
-      timeout: 30
-    filename: resetstats.sh
-    readme: resetstats.md
-    help: https://authors.com/scripts/index.html
-  - name: Gather kernel stats
-    description: A script to all the kernel stats for an AP
-    type: bundle
-    runtype:
-      deferred: true
-    filename: kstats.uci
-    readme: kstats.md
-    help: https://authors.com/scripts/index.html
-
-

ap_scripts/Author 1/listantennas.sh

@@ -1 +0,0 @@
-#!/bin/sh

ap_scripts/Author 1/listnoise.sh

@@ -1,2 +0,0 @@
-#!/bin/sh
-

ap_scripts/Author 1/resetstats.sh

@@ -1,2 +0,0 @@
-#!/bin/sh
-

ap_scripts/README.md

@@ -1 +0,0 @@
-# Repo for scripts

build

@@ -1 +1 @@
-3
+74

capabilities/edgecore_eap101.json

@@ -1 +0,0 @@
-{"compatible":"edgecore_eap101","model":"EdgeCore EAP101","network":{"lan":["eth1","eth2"],"wan":["eth0"]},"platform":"ap","switch":{"switch0":{"enable":false,"reset":false}},"wifi":{"platform/soc/c000000.wifi":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"dfs_channels":[52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320,5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"he_mac_capa":[13,-26104,4160],"he_phy_capa":[7168,19568,8072,-31807,260,44],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80","HE20","HE40","HE80","HE160","HE80+80"],"rx_ant":3,"tx_ant":3,"vht_capa":1939470770},"platform/soc/c000000.wifi+1":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462],"he_mac_capa":[13,-26104,4160],"he_phy_capa":[512,3184,8072,-31807,260,44],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80","HE20","HE40"],"rx_ant":3,"tx_ant":3,"vht_capa":1939437970}}}

capabilities/edgecore_eap102.json

@@ -1 +0,0 @@
-{"compatible":"edgecore_eap102","model":"Edgecore EAP102","network":{"lan":["eth1"],"wan":["eth0"]},"platform":"ap","switch":{"switch0":{"enable":false,"reset":false}},"wifi":{"platform/soc/c000000.wifi1":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320,5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"he_mac_capa":[13,-26088,4160],"he_phy_capa":[1024,19552,32648,-31781,412,12],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80","HE20","HE40","HE80"],"rx_ant":240,"tx_ant":240,"vht_capa":1939601842},"platform/soc/c000000.wifi1+1":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462],"he_mac_capa":[13,-26088,4160],"he_phy_capa":[512,19552,32648,-31807,412,12],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80","HE20","HE40"],"rx_ant":3,"tx_ant":3,"vht_capa":1939437970}}}

capabilities/edgecore_ecw5211.json

@@ -1 +0,0 @@
-{"compatible":"edgecore_ecw5211","model":"Edgecore ECW5211","network":{"lan":["eth1"],"wan":["eth0"]},"platform":"ap","wifi":{"platform/soc/a000000.wifi":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11,12,13,14],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462,2467,2472,2484],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986},"platform/soc/a800000.wifi":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"dfs_channels":[52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320,5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986}}}

capabilities/edgecore_ecw5410.json

@@ -1 +0,0 @@
-{"compatible":"edgecore_ecw5410","model":"Edgecore ECW5410","network":{"lan":["eth1"],"wan":["eth0"]},"platform":"ap","wifi":{"soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"dfs_channels":[52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320,5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80","VHT80+80","VHT160"],"rx_ant":15,"tx_ant":15,"vht_capa":865827322},"soc/1b900000.pci/pci0002:00/0002:00:00.0/0002:01:00.0":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11,12,13,14],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462,2467,2472,2484],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":15,"tx_ant":15,"vht_capa":865827250}}}

capabilities/edgecore_spw2ac1200-lan-poe.json

@@ -1 +0,0 @@
-{"compatible":"edgecore_spw2ac1200-lan-poe","model":"Edgecore SPW2AC1200","network":{"lan":["eth0"],"wan":["eth1"]},"platform":"ap","wifi":{"platform/soc/a000000.wifi":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11,12,13,14],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462,2467,2472,2484],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986},"platform/soc/a800000.wifi":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"dfs_channels":[52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320,5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986}}}

capabilities/edgecore_spw2ac1200.json

@@ -1 +0,0 @@
-{"compatible":"edgecore_spw2ac1200","model":"Edgecore SPW2AC1200","network":{"lan":["eth1"],"wan":["eth0"]},"platform":"ap","wifi":{"platform/soc/a000000.wifi":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11,12,13,14],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462,2467,2472,2484],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986},"platform/soc/a800000.wifi":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320,5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986}}}

capabilities/edgecore_sswac2600.json

@@ -1 +0,0 @@
-{"compatible":"edgecore_ssw2ac2600","model":"Edgecore SSW2AC2600","network":{"lan":["eth1"],"wan":["eth0"]},"platform":"ap","wifi":{"soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320,5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80","VHT80+80","VHT160"],"rx_ant":15,"tx_ant":15,"vht_capa":865827322},"soc/1b900000.pci/pci0002:00/0002:00:00.0/0002:01:00.0":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11,12,13,14],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462,2467,2472,2484],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":15,"tx_ant":15,"vht_capa":865827250}}}

capabilities/linksys_ea6350-v4.json

@@ -1 +0,0 @@
-{"compatible":"linksys_ea6350-v4","model":"Linksys EA6350 v4","network":{"lan":["lan1","lan2","lan3","lan4"],"wan":["wan"]},"platform":"ap","wifi":{"1e140000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11,12,13,14],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462,2467,2472,2484],"ht_capa":510,"htmode":["HT20","HT40"],"rx_ant":3,"tx_ant":3},"1e140000.pcie/pci0000:00/0000:00:01.0/0000:02:00.0":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320,5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"ht_capa":511,"htmode":["HT20","HT40","VHT20","VHT40","VHT80","VHT80+80","VHT160"],"rx_ant":3,"tx_ant":3,"vht_capa":864027128}}}

capabilities/linksys_ea8300.json

@@ -1 +0,0 @@
-{"compatible":"linksys_ea8300","model":"Linksys EA8300 (Dallas)","network":{"lan":["eth0"],"wan":["eth1"]},"platform":"ap","switch":{"switch0":{"enable":true,"ports":[{"device":"eth0","need_tag":false,"num":0,"want_untag":true},{"num":1,"role":"lan"},{"num":2,"role":"lan"},{"num":3,"role":"lan"},{"num":4,"role":"lan"}],"reset":true,"roles":[{"device":"eth0","ports":"1 2 3 4 0","role":"lan"}]}},"wifi":{"platform/soc/a000000.wifi":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986},"platform/soc/a800000.wifi":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64],"dfs_channels":[52,56,60,64],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986},"soc/40000000.pci/pci0000:00/0000:00:00.0/0000:01:00.0":{"band":["5G"],"channels":[100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"dfs_channels":[100,104,108,112,116,120,124,128,132,136,140,144],"frequencies":[5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865696178}}}

capabilities/wallys_dr40x9.json

@@ -1 +0,0 @@
-{"compatible":"wallys_dr40x9","model":"Wallys DR40X9","network":{"lan":["eth0"],"wan":["eth1"]},"platform":"ap","wifi":{"platform/soc/a000000.wifi":{"band":["2G"],"channels":[1,2,3,4,5,6,7,8,9,10,11,12,13,14],"frequencies":[2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462,2467,2472,2484],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986},"platform/soc/a800000.wifi":{"band":["5G"],"channels":[36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165],"frequencies":[5180,5200,5220,5240,5260,5280,5300,5320,5500,5520,5540,5560,5580,5600,5620,5640,5660,5680,5700,5720,5745,5765,5785,5805,5825],"ht_capa":6639,"htmode":["HT20","HT40","VHT20","VHT40","VHT80"],"rx_ant":3,"tx_ant":3,"vht_capa":865687986}}}

cmake-build-debug/rdkafka_version_test.cpp

@@ -0,0 +1,4 @@
+#include <librdkafka/rdkafka.h>
+ #if RD_KAFKA_VERSION >= 0x00090400
+ int main() { }
+ #endif

cmake-build-debug/ucentralgw.cbp

@@ -0,0 +1,637 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<CodeBlocks_project_file>
+	<FileVersion major="1" minor="6"/>
+	<Project>
+		<Option title="ucentralgw"/>
+		<Option makefile_is_custom="1"/>
+		<Option compiler="gcc"/>
+		<Option virtualFolders="CMake Files\;CMake Files\..\;CMake Files\..\..\;CMake Files\..\..\..\;CMake Files\..\..\..\..\;CMake Files\..\..\..\..\..\;CMake Files\..\..\..\..\..\..\;CMake Files\..\..\..\..\..\..\usr\;CMake Files\..\..\..\..\..\..\usr\local\;CMake Files\..\..\..\..\..\..\usr\local\lib\;CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\;CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Boost-1.75.0\;CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_headers-1.75.0\;CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_system-1.75.0\;CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\CppKafka\;CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\;CMake Files\cmake\;CMake Files\cmake-build-debug\;"/>
+		<Build>
+			<Target title="all">
+				<Option working_dir="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug"/>
+				<Option type="4"/>
+				<MakeCommands>
+					<Build command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 all"/>
+					<CompileFile command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 &quot;$file&quot;"/>
+					<Clean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+					<DistClean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+				</MakeCommands>
+			</Target>
+			<Target title="install/local">
+				<Option working_dir="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug"/>
+				<Option type="4"/>
+				<MakeCommands>
+					<Build command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 install/local"/>
+					<CompileFile command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 &quot;$file&quot;"/>
+					<Clean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+					<DistClean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+				</MakeCommands>
+			</Target>
+			<Target title="rebuild_cache">
+				<Option working_dir="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug"/>
+				<Option type="4"/>
+				<MakeCommands>
+					<Build command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 rebuild_cache"/>
+					<CompileFile command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 &quot;$file&quot;"/>
+					<Clean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+					<DistClean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+				</MakeCommands>
+			</Target>
+			<Target title="edit_cache">
+				<Option working_dir="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug"/>
+				<Option type="4"/>
+				<MakeCommands>
+					<Build command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 edit_cache"/>
+					<CompileFile command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 &quot;$file&quot;"/>
+					<Clean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+					<DistClean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+				</MakeCommands>
+			</Target>
+			<Target title="install/strip">
+				<Option working_dir="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug"/>
+				<Option type="4"/>
+				<MakeCommands>
+					<Build command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 install/strip"/>
+					<CompileFile command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 &quot;$file&quot;"/>
+					<Clean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+					<DistClean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+				</MakeCommands>
+			</Target>
+			<Target title="install">
+				<Option working_dir="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug"/>
+				<Option type="4"/>
+				<MakeCommands>
+					<Build command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 install"/>
+					<CompileFile command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 &quot;$file&quot;"/>
+					<Clean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+					<DistClean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+				</MakeCommands>
+			</Target>
+			<Target title="list_install_components">
+				<Option working_dir="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug"/>
+				<Option type="4"/>
+				<MakeCommands>
+					<Build command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 list_install_components"/>
+					<CompileFile command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 &quot;$file&quot;"/>
+					<Clean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+					<DistClean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+				</MakeCommands>
+			</Target>
+			<Target title="ucentralgw">
+				<Option output="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/ucentralgw" prefix_auto="0" extension_auto="0"/>
+				<Option working_dir="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug"/>
+				<Option object_output="./"/>
+				<Option type="1"/>
+				<Option compiler="gcc"/>
+				<Compiler>
+					<Add option="-DAPP_VERSION=&quot;0.7.0&quot;"/>
+					<Add option="-DBUILD_NUMBER=&quot;120&quot;"/>
+					<Add option="-DTIP_GATEWAY_SERVICE=&quot;1&quot;"/>
+					<Add option="-D_DEBUG"/>
+					<Add option="-DPOCO_ENABLE_CPP14"/>
+					<Add option="-DPOCO_ENABLE_CPP11"/>
+					<Add option="-DPOCO_OS_FAMILY_UNIX"/>
+					<Add option="-DPOCO_HAVE_IPv6"/>
+					<Add option="-DPOCO_NO_STAT64"/>
+					<Add option="-DXML_DTD"/>
+					<Add option="-DTHREADSAFE"/>
+					<Add option="-DNO_TCL"/>
+					<Add option="-DBOOST_ALL_NO_LIB"/>
+					<Add directory="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src"/>
+					<Add directory="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/include/kafka"/>
+					<Add directory="/usr/local/opt/mysql-client/include"/>
+					<Add directory="/usr/local/include"/>
+					<Add directory="/usr/local/opt/openssl/include"/>
+					<Add directory="/usr/local/opt/mysql-client/include/mysql"/>
+					<Add directory="/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../include/c++/v1"/>
+					<Add directory="/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/12.0.5/include"/>
+					<Add directory="/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include"/>
+					<Add directory="/System/Library/Frameworks"/>
+					<Add directory="/Library/Frameworks"/>
+				</Compiler>
+				<MakeCommands>
+					<Build command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 ucentralgw"/>
+					<CompileFile command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 &quot;$file&quot;"/>
+					<Clean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+					<DistClean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+				</MakeCommands>
+			</Target>
+			<Target title="ucentralgw/fast">
+				<Option output="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/ucentralgw" prefix_auto="0" extension_auto="0"/>
+				<Option working_dir="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug"/>
+				<Option object_output="./"/>
+				<Option type="1"/>
+				<Option compiler="gcc"/>
+				<Compiler>
+					<Add option="-DAPP_VERSION=&quot;0.7.0&quot;"/>
+					<Add option="-DBUILD_NUMBER=&quot;120&quot;"/>
+					<Add option="-DTIP_GATEWAY_SERVICE=&quot;1&quot;"/>
+					<Add option="-D_DEBUG"/>
+					<Add option="-DPOCO_ENABLE_CPP14"/>
+					<Add option="-DPOCO_ENABLE_CPP11"/>
+					<Add option="-DPOCO_OS_FAMILY_UNIX"/>
+					<Add option="-DPOCO_HAVE_IPv6"/>
+					<Add option="-DPOCO_NO_STAT64"/>
+					<Add option="-DXML_DTD"/>
+					<Add option="-DTHREADSAFE"/>
+					<Add option="-DNO_TCL"/>
+					<Add option="-DBOOST_ALL_NO_LIB"/>
+					<Add directory="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src"/>
+					<Add directory="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/include/kafka"/>
+					<Add directory="/usr/local/opt/mysql-client/include"/>
+					<Add directory="/usr/local/include"/>
+					<Add directory="/usr/local/opt/openssl/include"/>
+					<Add directory="/usr/local/opt/mysql-client/include/mysql"/>
+					<Add directory="/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../include/c++/v1"/>
+					<Add directory="/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/12.0.5/include"/>
+					<Add directory="/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include"/>
+					<Add directory="/System/Library/Frameworks"/>
+					<Add directory="/Library/Frameworks"/>
+				</Compiler>
+				<MakeCommands>
+					<Build command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 ucentralgw/fast"/>
+					<CompileFile command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 &quot;$file&quot;"/>
+					<Clean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+					<DistClean command="/usr/local/bin/gmake -j16 -f &quot;/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/Makefile&quot;  VERBOSE=1 clean"/>
+				</MakeCommands>
+			</Target>
+		</Build>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/build">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/ALBHealthCheckServer.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/AuthClient.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/AuthClient.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/CentralConfig.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/CentralConfig.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/CommandChannel.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/CommandChannel.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/CommandManager.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/CommandManager.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/Daemon.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/Daemon.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/DeviceRegistry.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/DeviceRegistry.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/FileUploader.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/FileUploader.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/KafkaManager.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/KafkaManager.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/Kafka_topics.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/MicroService.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/MicroService.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/OUIServer.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/OUIServer.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/OpenAPIRequest.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/OpenAPIRequest.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_BlackList.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_BlackList.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_GWobjects.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_GWobjects.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_InternalServer.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_InternalServer.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_RPC.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_RPC.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_SecurityObjects.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_SecurityObjects.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_command.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_command.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_commands.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_commands.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_default_configuration.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_default_configuration.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_default_configurations.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_default_configurations.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_device_commandHandler.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_device_commandHandler.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_device_handler.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_device_handler.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_devices_handler.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_devices_handler.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_file.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_file.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_handler.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_handler.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_ouis.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_ouis.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_protocol.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_server.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_server.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_system_command.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_system_command.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_utils.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/RESTAPI_utils.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/StateProcessor.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/StateProcessor.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/StorageArchiver.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/StorageArchiver.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/StorageService.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/StorageService.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/SubSystemServer.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/SubSystemServer.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/Utils.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/Utils.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/WebSocketServer.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/WebSocketServer.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_blacklist.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_capabilities.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_command.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_defconfig.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_device.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_healthcheck.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_lifetime_stats.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_logs.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_mysql.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_pgql.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_sqlite.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_statistics.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/storage_tables.cpp">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/uCentralProtocol.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/src/uCentralTypes.h">
+			<Option target="ucentralgw"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/CMakeLists.txt">
+			<Option virtualFolder="CMake Files\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/BoostDetectToolset-1.75.0.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Boost-1.75.0/BoostConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Boost-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Boost-1.75.0/BoostConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Boost-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/boost_headers-1.75.0/boost_headers-config-version.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_headers-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/boost_headers-1.75.0/boost_headers-config.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_headers-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/boost_system-1.75.0/boost_system-config-version.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_system-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/boost_system-1.75.0/boost_system-config.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_system-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/boost_system-1.75.0/libboost_system-variant-mt-shared.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_system-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/boost_system-1.75.0/libboost_system-variant-mt-static.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_system-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/boost_system-1.75.0/libboost_system-variant-shared.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_system-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/boost_system-1.75.0/libboost_system-variant-static.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\boost_system-1.75.0\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/CppKafka/CppKafkaConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\CppKafka\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/CppKafka/CppKafkaConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\CppKafka\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/CppKafka/CppKafkaTargets-noconfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\CppKafka\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/CppKafka/CppKafkaTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\CppKafka\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoCryptoConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoCryptoConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoCryptoTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoCryptoTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataMySQLConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataMySQLConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataMySQLTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataMySQLTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataPostgreSQLConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataPostgreSQLConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataPostgreSQLTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataPostgreSQLTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataSQLiteConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataSQLiteConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataSQLiteTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataSQLiteTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoDataTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoFoundationConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoFoundationConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoFoundationTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoFoundationTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoJSONConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoJSONConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoJSONTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoJSONTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoJWTConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoJWTConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoJWTTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoJWTTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoNetConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoNetConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoNetSSLConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoNetSSLConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoNetSSLTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoNetSSLTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoNetTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoNetTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoUtilConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoUtilConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoUtilTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoUtilTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoXMLConfig.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoXMLConfigVersion.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoXMLTargets-relwithdebinfo.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/../../../../../../usr/local/lib/cmake/Poco/PocoXMLTargets.cmake">
+			<Option virtualFolder="CMake Files\..\..\..\..\..\..\usr\local\lib\cmake\Poco\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake/FindMySQL.cmake">
+			<Option virtualFolder="CMake Files\cmake\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake/FindPostgreSQL.cmake">
+			<Option virtualFolder="CMake Files\cmake\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake/FindRdKafka.cmake">
+			<Option virtualFolder="CMake Files\cmake\"/>
+		</Unit>
+		<Unit filename="/Users/stephb/Desktop/Dropbox/clion/wlan-cloud-ucentralgw/cmake-build-debug/rdkafka_version_test.cpp">
+			<Option virtualFolder="CMake Files\cmake-build-debug\"/>
+		</Unit>
+	</Project>
+</CodeBlocks_project_file>

config.yaml

@@ -0,0 +1,26 @@
+tip:
+  port: 6051
+  server: ssc.wlan.local
+  username: support@example.com
+  password: support
+
+certificates:
+  keyfile: keyfile.pem
+  certfile: certfile.pem
+  password: mypassword
+
+ucentral:
+  port: 1991
+  listeners: 100
+
+logger:
+  size: 10
+  days: 31
+
+ui:
+  port: 9771
+  username: support@example.com
+  password: support
+
+
+

docker-entrypoint.sh

@@ -1,106 +1,70 @@
-#!/bin/bash
+#!/bin/sh
 set -e
 
 if [ "$SELFSIGNED_CERTS" = 'true' ]; then
     update-ca-certificates
 fi
 
-if [[ "$TEMPLATE_CONFIG" = 'true' ]]; then
-    WEBSOCKET_HOST_ROOTCA=${WEBSOCKET_HOST_ROOTCA:-"\${APP_ROOT}/certs/root.pem"} \
-    WEBSOCKET_HOST_ISSUER=${WEBSOCKET_HOST_ISSUER:-"\${APP_ROOT}/certs/issuer.pem"} \
-    WEBSOCKET_HOST_CERT=${WEBSOCKET_HOST_CERT:-"\${APP_ROOT}/certs/websocket-cert.pem"} \
-    WEBSOCKET_HOST_KEY=${WEBSOCKET_HOST_KEY:-"\${APP_ROOT}/certs/websocket-key.pem"} \
-    WEBSOCKET_HOST_CLIENTCAS=${WEBSOCKET_HOST_CLIENTCAS:-"\${APP_ROOT}/certs/clientcas.pem"} \
-    WEBSOCKET_HOST_CAS=${WEBSOCKET_HOST_CAS:-"\${APP_ROOT}/certs/cas"} \
-    WEBSOCKET_HOST_PORT=${WEBSOCKET_HOST_PORT:-"15002"} \
-    WEBSOCKET_HOST_KEY_PASSWORD=${WEBSOCKET_HOST_KEY_PASSWORD:-"mypassword"} \
-    RESTAPI_HOST_ROOTCA=${RESTAPI_HOST_ROOTCA:-"\${APP_ROOT}/certs/restapi-ca.pem"} \
-    RESTAPI_HOST_PORT=${RESTAPI_HOST_PORT:-"16002"} \
-    RESTAPI_HOST_CERT=${RESTAPI_HOST_CERT:-"\${APP_ROOT}/certs/restapi-cert.pem"} \
-    RESTAPI_HOST_KEY=${RESTAPI_HOST_KEY:-"\${APP_ROOT}/certs/restapi-key.pem"} \
-    RESTAPI_HOST_KEY_PASSWORD=${RESTAPI_HOST_KEY_PASSWORD:-"mypassword"} \
-    INTERNAL_RESTAPI_HOST_ROOTCA=${INTERNAL_RESTAPI_HOST_ROOTCA:-"\${APP_ROOT}/certs/restapi-ca.pem"} \
-    INTERNAL_RESTAPI_HOST_PORT=${INTERNAL_RESTAPI_HOST_PORT:-"17002"} \
-    INTERNAL_RESTAPI_HOST_CERT=${INTERNAL_RESTAPI_HOST_CERT:-"\${APP_ROOT}/certs/restapi-cert.pem"} \
-    INTERNAL_RESTAPI_HOST_KEY=${INTERNAL_RESTAPI_HOST_KEY:-"\${APP_ROOT}/certs/restapi-key.pem"} \
-    INTERNAL_RESTAPI_HOST_KEY_PASSWORD=${INTERNAL_RESTAPI_HOST_KEY_PASSWORD:-"mypassword"} \
-    FILEUPLOADER_HOST_ROOTCA=${FILEUPLOADER_HOST_ROOTCA:-"\${APP_ROOT}/certs/restapi-ca.pem"} \
-    FILEUPLOADER_HOST_NAME=${FILEUPLOADER_HOST_NAME:-"localhost"} \
-    FILEUPLOADER_HOST_PORT=${FILEUPLOADER_HOST_PORT:-"16003"} \
-    FILEUPLOADER_HOST_CERT=${FILEUPLOADER_HOST_CERT:-"\${APP_ROOT}/certs/restapi-cert.pem"} \
-    FILEUPLOADER_HOST_KEY=${FILEUPLOADER_HOST_KEY:-"\${APP_ROOT}/certs/restapi-key.pem"} \
-    FILEUPLOADER_HOST_KEY_PASSWORD=${FILEUPLOADER_HOST_KEY_PASSWORD:-"mypassword"} \
-    FILEUPLOADER_PATH=${FILEUPLOADER_PATH:-"\${APP_ROOT}/uploads"} \
-    FILEUPLOADER_URI=${FILEUPLOADER_URI:-"https://localhost:16003"} \
-    FILEUPLOADER_MAXSIZE=${FILEUPLOADER_MAXSIZE:-"10000"} \
-    SERVICE_KEY=${SERVICE_KEY:-"\${APP_ROOT}/certs/restapi-key.pem"} \
-    SERVICE_KEY_PASSWORD=${SERVICE_KEY_PASSWORD:-"mypassword"} \
-    SYSTEM_DATA=${SYSTEM_DATA:-"\${APP_ROOT}/data"} \
-    SYSTEM_URI_PRIVATE=${SYSTEM_URI_PRIVATE:-"https://localhost:17002"} \
-    SYSTEM_URI_PUBLIC=${SYSTEM_URI_PUBLIC:-"https://localhost:16002"} \
-    SYSTEM_URI_UI=${SYSTEM_URI_UI:-"http://localhost"} \
-    SECURITY_RESTAPI_DISABLE=${SECURITY_RESTAPI_DISABLE:-"false"} \
-    SIMULATORID=${SIMULATORID:-""} \
-    IPTOCOUNTRY_PROVIDER=${IPTOCOUNTRY_PROVIDER:-"ipinfo"} \
-    IPTOCOUNTRY_IPINFO_TOKEN=${IPTOCOUNTRY_IPINFO_TOKEN:-""} \
-    IPTOCOUNTRY_IPDATA_APIKEY=${IPTOCOUNTRY_IPDATA_APIKEY:-""} \
-    AUTOPROVISIONING_PROCESS=${AUTOPROVISIONING_PROCESS:-"prov,default"} \
-    RTTY_INTERNAL=${RTTY_INTERNAL:-"true"} \
-    RTTY_ENABLED=${RTTY_ENABLED:-"true"} \
-    RTTY_SERVER=${RTTY_SERVER:-"localhost"} \
-    RTTY_PORT=${RTTY_PORT:-"5912"} \
-    RTTY_TOKEN=${RTTY_TOKEN:-""} \
-    RTTY_TIMEOUT=${RTTY_TIMEOUT:-"60"} \
-    RTTY_VIEWPORT=${RTTY_VIEWPORT:-"5913"} \
-    RTTY_ASSETS=${RTTY_ASSETS:-"\${APP_ROOT}/rtty_ui"} \
-    RADIUS_PROXY_ENABLE=${RADIUS_PROXY_ENABLE:-"false"} \
-    RADIUS_PROXY_ACCOUNTING_PORT=${RADIUS_PROXY_ACCOUNTING_PORT:-"1813"} \
-    RADIUS_PROXY_AUTHENTICATION_PORT=${RADIUS_PROXY_AUTHENTICATION_PORT:-"1812"} \
-    RADIUS_PROXY_COA_PORT=${RADIUS_PROXY_COA_PORT:-"3799"} \
-    KAFKA_ENABLE=${KAFKA_ENABLE:-"true"} \
-    KAFKA_BROKERLIST=${KAFKA_BROKERLIST:-"localhost:9092"} \
-    KAFKA_SSL_CA_LOCATION=${KAFKA_SSL_CA_LOCATION:-""} \
-    KAFKA_SSL_CERTIFICATE_LOCATION=${KAFKA_SSL_CERTIFICATE_LOCATION:-""} \
-    KAFKA_SSL_KEY_LOCATION=${KAFKA_SSL_KEY_LOCATION:-""} \
-    KAFKA_SSL_KEY_PASSWORD=${KAFKA_SSL_KEY_PASSWORD:-""} \
-    STORAGE_TYPE=${STORAGE_TYPE:-"sqlite"} \
-    STORAGE_TYPE_POSTGRESQL_HOST=${STORAGE_TYPE_POSTGRESQL_HOST:-"localhost"} \
-    STORAGE_TYPE_POSTGRESQL_USERNAME=${STORAGE_TYPE_POSTGRESQL_USERNAME:-"${APP_USER}"} \
-    STORAGE_TYPE_POSTGRESQL_PASSWORD=${STORAGE_TYPE_POSTGRESQL_PASSWORD:-"${APP_USER}"} \
-    STORAGE_TYPE_POSTGRESQL_DATABASE=${STORAGE_TYPE_POSTGRESQL_DATABASE:-"${APP_NAME}"} \
-    STORAGE_TYPE_POSTGRESQL_PORT=${STORAGE_TYPE_POSTGRESQL_PORT:-"5432"} \
-    STORAGE_TYPE_MYSQL_HOST=${STORAGE_TYPE_MYSQL_HOST:-"localhost"} \
-    STORAGE_TYPE_MYSQL_USERNAME=${STORAGE_TYPE_MYSQL_USERNAME:-"${APP_USER}"} \
-    STORAGE_TYPE_MYSQL_PASSWORD=${STORAGE_TYPE_MYSQL_PASSWORD:-"${APP_USER}"} \
-    STORAGE_TYPE_MYSQL_DATABASE=${STORAGE_TYPE_MYSQL_DATABASE:-"${APP_NAME}"} \
-    STORAGE_TYPE_MYSQL_PORT=${STORAGE_TYPE_MYSQL_PORT:-"3306"} \
-    CERTIFICATES_ALLOWMISMATCH=${CERTIFICATES_ALLOWMISMATCH:-"false"} \
-    IPINFO_DEFAULT_COUNTRY=${IPINFO_DEFAULT_COUNTRY:-"US"} \
-    DEVICE_SESSION_TIMEOUT=${DEVICE_SESSION_TIMEOUT:-"600"} \
-    LOGGING_LEVEL=${LOGGING_LEVEL:-"information"} \
-    envsubst < /"${APP_NAME}".properties.tmpl > "${APP_CONFIG}"/"${APP_NAME}".properties
+if [[ "$TEMPLATE_CONFIG" = 'true' && ! -f "$OWGW_CONFIG"/owgw.properties ]]; then
+  WEBSOCKET_HOST_ROOTCA=${WEBSOCKET_HOST_ROOTCA:-"\$OWGW_ROOT/certs/root.pem"} \
+  WEBSOCKET_HOST_ISSUER=${WEBSOCKET_HOST_ISSUER:-"\$OWGW_ROOT/certs/issuer.pem"} \
+  WEBSOCKET_HOST_CERT=${WEBSOCKET_HOST_CERT:-"\$OWGW_ROOT/certs/websocket-cert.pem"} \
+  WEBSOCKET_HOST_KEY=${WEBSOCKET_HOST_KEY:-"\$OWGW_ROOT/certs/websocket-key.pem"} \
+  WEBSOCKET_HOST_CLIENTCAS=${WEBSOCKET_HOST_CLIENTCAS:-"\$OWGW_ROOT/certs/clientcas.pem"} \
+  WEBSOCKET_HOST_CAS=${WEBSOCKET_HOST_CAS:-"\$OWGW_ROOT/certs/cas"} \
+  WEBSOCKET_HOST_PORT=${WEBSOCKET_HOST_PORT:-"15002"} \
+  WEBSOCKET_HOST_KEY_PASSWORD=${WEBSOCKET_HOST_KEY_PASSWORD:-"mypassword"} \
+  RESTAPI_HOST_ROOTCA=${RESTAPI_HOST_ROOTCA:-"\$OWGW_ROOT/certs/restapi-ca.pem"} \
+  RESTAPI_HOST_PORT=${RESTAPI_HOST_PORT:-"16002"} \
+  RESTAPI_HOST_CERT=${RESTAPI_HOST_CERT:-"\$OWGW_ROOT/certs/restapi-cert.pem"} \
+  RESTAPI_HOST_KEY=${RESTAPI_HOST_KEY:-"\$OWGW_ROOT/certs/restapi-key.pem"} \
+  RESTAPI_HOST_KEY_PASSWORD=${RESTAPI_HOST_KEY_PASSWORD:-"mypassword"} \
+  INTERNAL_RESTAPI_HOST_ROOTCA=${INTERNAL_RESTAPI_HOST_ROOTCA:-"\$OWGW_ROOT/certs/restapi-ca.pem"} \
+  INTERNAL_RESTAPI_HOST_PORT=${INTERNAL_RESTAPI_HOST_PORT:-"17002"} \
+  INTERNAL_RESTAPI_HOST_CERT=${INTERNAL_RESTAPI_HOST_CERT:-"\$OWGW_ROOT/certs/restapi-cert.pem"} \
+  INTERNAL_RESTAPI_HOST_KEY=${INTERNAL_RESTAPI_HOST_KEY:-"\$OWGW_ROOT/certs/restapi-key.pem"} \
+  INTERNAL_RESTAPI_HOST_KEY_PASSWORD=${INTERNAL_RESTAPI_HOST_KEY_PASSWORD:-"mypassword"} \
+  FILEUPLOADER_HOST_ROOTCA=${FILEUPLOADER_HOST_ROOTCA:-"\$OWGW_ROOT/certs/restapi-ca.pem"} \
+  FILEUPLOADER_HOST_NAME=${FILEUPLOADER_HOST_NAME:-"localhost"} \
+  FILEUPLOADER_HOST_PORT=${FILEUPLOADER_HOST_PORT:-"16003"} \
+  FILEUPLOADER_HOST_CERT=${FILEUPLOADER_HOST_CERT:-"\$OWGW_ROOT/certs/restapi-cert.pem"} \
+  FILEUPLOADER_HOST_KEY=${FILEUPLOADER_HOST_KEY:-"\$OWGW_ROOT/certs/restapi-key.pem"} \
+  FILEUPLOADER_HOST_KEY_PASSWORD=${FILEUPLOADER_HOST_KEY_PASSWORD:-"mypassword"} \
+  FILEUPLOADER_PATH=${FILEUPLOADER_PATH:-"\$OWGW_ROOT/uploads"} \
+  FILEUPLOADER_URI=${FILEUPLOADER_URI:-"https://localhost:16003"} \
+  SERVICE_KEY=${SERVICE_KEY:-"\$OWGW_ROOT/certs/restapi-key.pem"} \
+  SERVICE_KEY_PASSWORD=${SERVICE_KEY_PASSWORD:-"mypassword"} \
+  SYSTEM_DATA=${SYSTEM_DATA:-"\$OWGW_ROOT/data"} \
+  SYSTEM_URI_PRIVATE=${SYSTEM_URI_PRIVATE:-"https://localhost:17002"} \
+  SYSTEM_URI_PUBLIC=${SYSTEM_URI_PUBLIC:-"https://localhost:16002"} \
+  SYSTEM_URI_UI=${SYSTEM_URI_UI:-"http://localhost"} \
+  RTTY_ENABLED=${RTTY_ENABLED:-"false"} \
+  RTTY_SERVER=${RTTY_SERVER:-"localhost"} \
+  RTTY_PORT=${RTTY_PORT:-"5912"} \
+  RTTY_TOKEN=${RTTY_TOKEN:-"96181c567b4d0d98c50f127230068fa8"} \
+  RTTY_TIMEOUT=${RTTY_TIMEOUT:-"60"} \
+  RTTY_VIEWPORT=${RTTY_VIEWPORT:-"5913"} \
+  KAFKA_ENABLE=${KAFKA_ENABLE:-"true"} \
+  KAFKA_BROKERLIST=${KAFKA_BROKERLIST:-"localhost:9092"} \
+  STORAGE_TYPE=${STORAGE_TYPE:-"sqlite"} \
+  STORAGE_TYPE_POSTGRESQL_HOST=${STORAGE_TYPE_POSTGRESQL_HOST:-"localhost"} \
+  STORAGE_TYPE_POSTGRESQL_USERNAME=${STORAGE_TYPE_POSTGRESQL_USERNAME:-"owgw"} \
+  STORAGE_TYPE_POSTGRESQL_PASSWORD=${STORAGE_TYPE_POSTGRESQL_PASSWORD:-"owgw"} \
+  STORAGE_TYPE_POSTGRESQL_DATABASE=${STORAGE_TYPE_POSTGRESQL_DATABASE:-"owgw"} \
+  STORAGE_TYPE_POSTGRESQL_PORT=${STORAGE_TYPE_POSTGRESQL_PORT:-"5432"} \
+  STORAGE_TYPE_MYSQL_HOST=${STORAGE_TYPE_MYSQL_HOST:-"localhost"} \
+  STORAGE_TYPE_MYSQL_USERNAME=${STORAGE_TYPE_MYSQL_USERNAME:-"owgw"} \
+  STORAGE_TYPE_MYSQL_PASSWORD=${STORAGE_TYPE_MYSQL_PASSWORD:-"owgw"} \
+  STORAGE_TYPE_MYSQL_DATABASE=${STORAGE_TYPE_MYSQL_DATABASE:-"owgw"} \
+  STORAGE_TYPE_MYSQL_PORT=${STORAGE_TYPE_MYSQL_PORT:-"3306"} \
+  envsubst < $OWGW_CONFIG/owgw.properties.tmpl > $OWGW_CONFIG/owgw.properties
 fi
 
-# Check if rtty_ui directory exists
-export RTTY_ASSETS=$(grep 'rtty.assets' "${APP_CONFIG}"/"${APP_NAME}".properties | awk -F '=' '{print $2}' | xargs | envsubst)
-
-if [ -z "$RTTY_ASSETS" ]; then
-    export RTTY_ASSETS="${APP_ROOT}/rtty_ui"
-fi
-
-if [[ ! -d "$(dirname $RTTY_ASSETS)" ]]; then
-  mkdir -p "$(dirname $RTTY_ASSETS)"
-fi
-
-if [[ ! -d "$RTTY_ASSETS" ]]; then
-    cp -r /dist/rtty_ui $RTTY_ASSETS
-fi
-
-if [ "$1" = "${APP_HOME_DIR}/${APP_NAME}" -a "$(id -u)" = '0' ]; then
+if [ "$1" = '/openwifi/owgw' -a "$(id -u)" = '0' ]; then
     if [ "$RUN_CHOWN" = 'true' ]; then
-        chown -R "$APP_USER": "${APP_ROOT}" "$APP_CONFIG"
+      chown -R "$OWGW_USER": "$OWGW_ROOT" "$OWGW_CONFIG"
     fi
-    exec gosu "$APP_USER" "$@"
+    exec su-exec "$OWGW_USER" "$@"
 fi
 
 exec "$@"

docker_build.sh

@@ -0,0 +1,14 @@
+USERNAME=arilia
+HUBNAME=tip-tip-wlan-cloud-ucentral.jfrog.io
+IMAGE_NAME=ucentralgw
+
+echo "Removing docker images before build..."
+docker rmi -f $(docker images -a -q)
+echo "Building $IMAGE_NAME image..."
+docker build --no-cache --tag $IMAGE_NAME .
+IMAGE_ID=`docker images -q $IMAGE_NAME`
+docker login --username=$USERNAME $HUBNAME
+docker tag $IMAGE_ID $HUBNAME/$IMAGE_NAME:latest
+echo "Updating $HUBNAME with the latest $IMAGE_NAME image..."
+docker push $HUBNAME/$IMAGE_NAME
+docker logout $HUBNAME

docker_clean.sh

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+# Removes all local images. This is dangerous but good when debugging
+docker rmi -f $(docker images -a -q)
+

docker_run.sh

@@ -0,0 +1,43 @@
+#!/bin/sh
+
+HUBNAME=tip-tip-wlan-cloud-ucentral.jfrog.io
+IMAGE_NAME=ucentralgw
+DOCKER_NAME=$HUBNAME/$IMAGE_NAME:master
+
+CONTAINER_NAME=ucentralgw
+
+#stop previously running images
+docker container stop $CONTAINER_NAME
+docker container rm $CONTAINER_NAME --force
+
+if [[ ! -d logs ]]
+then
+    mkdir logs
+fi
+
+if [[ ! -d uploads ]]
+then
+    mkdir uploads
+fi
+
+if [[ ! -d certs ]]
+then
+  echo "certs directory does not exist. Please create and add the proper certificates."
+  exit 1
+fi
+
+if [[ ! -f owgw.properties ]]
+then
+  echo "Configuration file ucentral.properties is missing in the current directory"
+  exit 2
+fi
+
+docker run -d -p 15002:15002 \
+              -p 16001:16001 \
+              -p 16003:16003 \
+              --init \
+              --volume="$PWD:/ucentral-data" \
+              -e UCENTRALGW_ROOT="/ucentral-data" \
+              -e UCENTRALGW_CONFIG="/ucentral-data" \
+              --name="ucentralgw" $DOCKER_NAME
+

helm/Chart.lock

@@ -1,12 +1,12 @@
 dependencies:
 - name: postgresql
-  repository: https://tip.jfrog.io/artifactory/tip-wlan-cloud-ucentral-helm/
+  repository: https://charts.bitnami.com/bitnami
   version: 10.9.2
 - name: mysql
-  repository: https://tip.jfrog.io/artifactory/tip-wlan-cloud-ucentral-helm/
+  repository: https://charts.bitnami.com/bitnami
   version: 8.8.3
 - name: mariadb
-  repository: https://tip.jfrog.io/artifactory/tip-wlan-cloud-ucentral-helm/
+  repository: https://charts.bitnami.com/bitnami
   version: 9.4.2
-digest: sha256:e9df5a5d8a0a193bfda33ea06060203aace01f0f7df9eda662a84185322c7ab5
-generated: "2022-06-03T15:38:31.063022252+03:00"
+digest: sha256:1fdae7cbea906e41dccd8618ff9e2c68d0c684724ae27c79a12bb6089968df5c
+generated: "2021-08-17T12:18:40.341427893+03:00"

helm/Chart.yaml

@@ -5,14 +5,14 @@ name: owgw
 version: 0.1.0
 dependencies:
 - name: postgresql
-  repository: https://tip.jfrog.io/artifactory/tip-wlan-cloud-ucentral-helm/
+  repository: https://charts.bitnami.com/bitnami
   version: 10.9.2
   condition: postgresql.enabled
 - name: mysql
-  repository: https://tip.jfrog.io/artifactory/tip-wlan-cloud-ucentral-helm/
+  repository: https://charts.bitnami.com/bitnami
   version: 8.8.3
   condition: mysql.enabled
 - name: mariadb
-  repository: https://tip.jfrog.io/artifactory/tip-wlan-cloud-ucentral-helm/
+  repository: https://charts.bitnami.com/bitnami
   version: 9.4.2
   condition: mariadb.enabled

helm/README.md

@@ -20,7 +20,7 @@ Currently this chart is not assembled in charts archives, so [helm-git](https://
 To install the chart with the release name `my-release`:
 
 ```bash
-$ helm install --name my-release git+https://github.com/Telecominfraproject/wlan-cloud-ucentralgw@helm/owgw-0.1.0.tgz?ref=master
+$ helm install --name my-release git+https://github.com/Telecominfraproject/wlan-cloud-ucentralgw@helm?ref=master
 ```
 
 The command deploys the Gateway on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation.
@@ -79,8 +79,7 @@ The following table lists the configurable parameters of the chart and their def
 | persistence.size | string | Defines PV size | `'10Gi'` |
 | public_env_variables | hash | Defines list of environment variables to be passed to the Gateway | |
 | configProperties | hash | Configuration properties that should be passed to the application in `owgw.properties`. May be passed by key in set (i.e. `configProperties."rtty\.token"`) | |
-| existingCertsSecret | string | Existing Kubernetes secret containing all required certificates and private keys for microservice operation. If set, certificates from `certs` key are ignored | `""` |
-| certs | hash | Defines files (keys and certificates) that should be passed to the Gateway (PEM format is adviced to be used) (see `volumes.owgw` on where it is mounted). If `existingCertsSecret` is set, certificates passed this way will not be used. |  |
+| certs | hash | Defines files (keys and certificates) that should be passed to the Gateway (PEM format is adviced to be used) (see `volumes.owgw` on where it is mounted) |  |
 | certsCAs | hash | Defines files with CAs that should be passed to the Gateway (see `volumes.owgw` on where it is mounted) |  |
 
 

helm/templates/_helpers.tpl

@@ -30,13 +30,3 @@ Create chart name and version as used by the chart label.
 {{- define "owgw.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
-
-{{- define "owgw.ingress.apiVersion" -}}
-  {{- if .Capabilities.APIVersions.Has "networking.k8s.io/v1" -}}
-      {{- print "networking.k8s.io/v1" -}}
-  {{- else if .Capabilities.APIVersions.Has "networking.k8s.io/v1beta1" -}}
-    {{- print "networking.k8s.io/v1beta1" -}}
-  {{- else -}}
-    {{- print "extensions/v1beta1" -}}
-  {{- end -}}
-{{- end -}}

helm/templates/deployment.yaml

@@ -1,5 +1,4 @@
 {{- $root := . -}}
-{{- $storageType := index .Values.configProperties "storage.type" -}}
 ---
 apiVersion: apps/v1
 kind: Deployment
@@ -14,7 +13,6 @@ spec:
   replicas: {{ .Values.replicaCount }}
   strategy:
     type: {{ .Values.strategyType }}
-  revisionHistoryLimit: {{ .Values.revisionHistoryLimit }}
   selector:
     matchLabels:
       app.kubernetes.io/name: {{ include "owgw.name" . }}
@@ -26,12 +24,6 @@ spec:
     metadata:
       annotations:
         checksum/config: {{ include "owgw.config" . | sha256sum }}
-        {{- if .Values.podSecurityPolicy.enabled }}
-        kubernetes.io/psp: {{ include "owgw.fullname" . }}-{{ .Release.Namespace }}-owgw-unsafe-sysctl
-        {{- end }}
-        {{- with .Values.podAnnotations }}
-        {{- toYaml . | nindent 8 }}
-        {{- end }}
       labels:
         app.kubernetes.io/name: {{ include "owgw.name" . }}
         app.kubernetes.io/instance: {{ .Release.Name }}
@@ -40,48 +32,6 @@ spec:
         {{- end }}
     spec:
 
-      initContainers:
-        - name: wait-kafka
-          image: "{{ .Values.images.dockerize.repository }}:{{ .Values.images.dockerize.tag }}"
-          imagePullPolicy: {{ .Values.images.dockerize.pullPolicy }}
-          args:
-            - -wait
-            - tcp://{{ index .Values.configProperties "openwifi.kafka.brokerlist" }}
-            - -timeout
-            - 600s
-{{- if eq $storageType "postgresql" }}
-        - name: wait-postgres
-          image: "{{ .Values.images.owgw.repository }}:{{ .Values.images.owgw.tag }}"
-          imagePullPolicy: {{ .Values.images.owgw.pullPolicy }}
-          command:
-            - /wait-for-postgres.sh
-            - {{ index .Values.configProperties "storage.type.postgresql.host" }}
-            - echo
-            - "PostgreSQL is ready"
-          env:
-            - name: KUBERNETES_DEPLOYED
-              value: "{{ now }}"
-          {{- range $key, $value := .Values.public_env_variables }}
-            - name: {{ $key }}
-              value: {{ $value | quote }}
-          {{- end }}
-          {{- range $key, $value := .Values.secret_env_variables }}
-            - name: {{ $key }}
-              valueFrom:
-                secretKeyRef:
-                  name: {{ include "owgw.fullname" $root }}-env
-                  key: {{ $key }}
-          {{- end }}
-          volumeMounts:
-          {{- range .Values.volumes.owgw }}
-          - name: {{ .name }}
-            mountPath: {{ .mountPath }}
-            {{- if .subPath }}
-            subPath: {{ .subPath }}
-            {{- end }}
-          {{- end }}
-{{- end }}
-
       containers:
 
         - name: owgw
@@ -109,11 +59,6 @@ spec:
               containerPort: {{ $portValue.targetPort }}
               protocol: {{ $portValue.protocol }}
           {{- end }}
-          {{- range $port, $portValue := .Values.services.radius.ports }}
-            - name: {{ $port }}
-              containerPort: {{ $portValue.targetPort }}
-              protocol: {{ $portValue.protocol }}
-          {{- end }}
 
           volumeMounts:
           {{- range .Values.volumes.owgw }}

helm/templates/ingress.yaml

@@ -2,7 +2,7 @@
 {{- range $ingress, $ingressValue := .Values.ingresses }}
 {{- if $ingressValue.enabled }}
 ---
-apiVersion: {{ include "owgw.ingress.apiVersion" $root }}
+apiVersion: extensions/v1beta1
 kind: Ingress
 metadata:
   name: {{ include "owgw.fullname" $root }}-{{ $ingress }}
@@ -36,23 +36,9 @@ spec:
       paths:
       {{- range $ingressValue.paths }}
         - path: {{ .path }}
-          {{- if $root.Capabilities.APIVersions.Has "networking.k8s.io/v1" }}
-          pathType: {{ .pathType | default "ImplementationSpecific" }}
-          {{- end }}
           backend:
-            {{- if $root.Capabilities.APIVersions.Has "networking.k8s.io/v1" }}
-            service:
-              name: {{ include "owgw.fullname" $root }}-{{ .serviceName }}
-              port:
-              {{- if kindIs "string" .servicePort }}
-                name: {{ .servicePort }}
-              {{- else }}
-                number: {{ .servicePort }}
-              {{- end }}
-            {{- else }}
             serviceName: {{ include "owgw.fullname" $root }}-{{ .serviceName }}
             servicePort: {{ .servicePort }}
-            {{- end }}
       {{- end }}
   {{- end }}
 

helm/templates/psp.yaml

@@ -1,28 +0,0 @@
-{{- if .Values.podSecurityPolicy.enabled }}
----
-apiVersion: policy/v1beta1
-kind: PodSecurityPolicy
-metadata:
-  name: {{ include "owgw.fullname" . }}-{{ .Release.Namespace }}-owgw-unsafe-sysctl
-  labels:
-    app.kubernetes.io/name: {{ include "owgw.name" . }}
-    helm.sh/chart: {{ include "owgw.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-spec:
-  allowedUnsafeSysctls:
-  {{- range $unsafeSysctl := .Values.securityContext.sysctls }}
-  - {{ $unsafeSysctl.name }}
-  {{- end }}
-  privileged: false
-  seLinux:
-    rule: RunAsAny
-  supplementalGroups:
-    rule: RunAsAny
-  runAsUser:
-    rule: RunAsAny
-  fsGroup:
-    rule: RunAsAny
-  volumes:
-  - '*'
-{{- end }}

helm/templates/role.yaml

@@ -1,16 +0,0 @@
-{{- if .Values.podSecurityPolicy.enabled }}
----
-kind: Role
-apiVersion: rbac.authorization.k8s.io/v1
-metadata:
-  name: {{ include "owgw.fullname" . }}-owgw-use-unsafe-sysctl
-rules:
-- apiGroups:
-  - policy
-  resources:
-  - podsecuritypolicies
-  verbs:
-  - use
-  resourceNames:
-  - {{ include "owgw.fullname" . }}-{{ .Release.Namespace }}-owgw-unsafe-sysctl
-{{- end }}

helm/templates/rolebinding.yaml

@@ -1,15 +0,0 @@
-{{- if .Values.podSecurityPolicy.enabled }}
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: RoleBinding
-metadata:
-  name: {{ include "owgw.fullname" . }}-owgw-use-unsafe-sysctl-to-default
-roleRef:
-  apiGroup: rbac.authorization.k8s.io
-  kind: Role
-  name: {{ include "owgw.fullname" . }}-owgw-use-unsafe-sysctl
-subjects:
-- kind: ServiceAccount
-  name: default
-  namespace: {{ .Release.Namespace }}
-{{- end }}

helm/values.yaml

@@ -1,7 +1,6 @@
 # System
 replicaCount: 1
 strategyType: Recreate
-revisionHistoryLimit: 2
 
 nameOverride: ""
 fullnameOverride: ""
@@ -9,20 +8,16 @@ fullnameOverride: ""
 images:
   owgw:
     repository: tip-tip-wlan-cloud-ucentral.jfrog.io/owgw
-    tag: master
+    tag: v2.2.0-RC1
     pullPolicy: Always
 #    regcred:
 #      registry: tip-tip-wlan-cloud-ucentral.jfrog.io
 #      username: username
 #      password: password
-  dockerize:
-    repository: tip-tip-wlan-cloud-ucentral.jfrog.io/dockerize
-    tag: 0.16.0
-    pullPolicy: IfNotPresent
 
 services:
   owgw:
-    type: ClusterIP
+    type: LoadBalancer
     ports:
       websocket:
         servicePort: 15002
@@ -40,28 +35,6 @@ services:
         servicePort: 16003
         targetPort: 16003
         protocol: TCP
-      rttys:
-        servicePort: 5912
-        targetPort: 5912
-        protocol: TCP
-      rttys-view:
-        servicePort: 5913
-        targetPort: 5913
-  radius:
-    type: ClusterIP
-    ports:
-      acc:
-        servicePort: 1813
-        targetPort: 1813
-        protocol: UDP
-      auth:
-        servicePort: 1812
-        targetPort: 1812
-        protocol: UDP
-      coa:
-        servicePort: 3799
-        targetPort: 3799
-        protocol: UDP
 
 checks:
   owgw:
@@ -70,9 +43,9 @@ checks:
         path: /
         port: 16102
     readiness:
-      exec:
-        command:
-          - /readiness_check
+      httpGet:
+        path: /
+        port: 16102
 
 ingresses:
   restapi:
@@ -84,7 +57,6 @@ ingresses:
     - restapi.chart-example.local
     paths:
     - path: /
-      pathType: ImplementationSpecific
       serviceName: owgw
       servicePort: restapi
   fileuploader:
@@ -96,7 +68,6 @@ ingresses:
     - fileuploader.chart-example.local
     paths:
     - path: /
-      pathType: ImplementationSpecific
       serviceName: owgw
       servicePort: fileuploader
 
@@ -113,7 +84,7 @@ volumes:
       mountPath: /owgw-data/certs
       volumeDefinition: |
         secret:
-          secretName: {{ if .Values.existingCertsSecret }}{{ .Values.existingCertsSecret }}{{ else }}{{ include "owgw.fullname" . }}-certs{{ end }}
+          secretName: {{ include "owgw.fullname" . }}-certs
     - name: certs-cas
       mountPath: /owgw-data/certs/cas
       volumeDefinition: |
@@ -139,18 +110,7 @@ resources: {}
   #  memory: 128Mi
 
 securityContext:
-  fsGroup: 1000
-  # Usage of unsafe sysctls requires multiple things:
-  # - allow these unsafe sysctls on kubelet level (by adding --allowed-unsafe-sysctls flag)
-  # - enabling addition of PodSecurityContext setting podSecurityPolicy.enabled to "true" below
-  # - uncommenting parameters below
-  #sysctls:
-  #- name: net.ipv4.tcp_keepalive_intvl
-  #  value: "5"
-  #- name: net.ipv4.tcp_keepalive_probes
-  #  value: "2"
-  #- name: net.ipv4.tcp_keepalive_time
-  #  value: "45"
+  fsGroup: 101
 
 nodeSelector: {}
 
@@ -158,11 +118,6 @@ tolerations: []
 
 affinity: {}
 
-podAnnotations: {}
-
-podSecurityPolicy:
-  enabled: false
-
 persistence:
   enabled: true
   # storageClassName: "-"
@@ -175,16 +130,8 @@ persistence:
 public_env_variables:
   OWGW_ROOT: /owgw-data
   OWGW_CONFIG: /owgw-data
-  # Environment variables required for the readiness checks using script
-  FLAGS: "-s --connect-timeout 3"
-  # NOTE in order for readiness check to use system info you need to set READINESS_METHOD to "systeminfo" and set OWSEC to the OWSEC's REST API endpoint
-  #READINESS_METHOD: systeminfo
-  #OWSEC: gw-qa01.cicd.lab.wlan.tip.build:16001
 
-secret_env_variables:
-  # NOTE in order for readiness check to use system info method you need to override these values to the real OWSEC credentials
-  OWSEC_USERNAME: tip@ucentral.com
-  OWSEC_PASSWORD: openwifi
+secret_env_variables: {}
 
 configProperties:
   # -> Public part
@@ -231,28 +178,19 @@ configProperties:
   openwifi.devicetypes.0: AP:linksys_ea8300,edgecore_eap101,linksys_e8450-ubi
   openwifi.devicetypes.1: SWITCH:edgecore_ecs4100-12ph
   openwifi.devicetypes.2: IOT:esp32
-  openwifi.certificates.allowmismatch: "false"
-  oui.download.uri: https://standards-oui.ieee.org/oui/oui.txt
+  oui.download.uri: https://linuxnet.ca/ieee/oui.txt
   firmware.autoupdate.policy.default: auto
-  iptocountry.provider: ipinfo
   # Callback
   openwifi.callback.enable: "false"
   openwifi.callback.0.local: localhost:16001
   openwifi.callback.0.remote: localhost:15055
   openwifi.callback.0.topics: owfws
   # rtty
-  rtty.internal: "true"
   rtty.enabled: "true"
   rtty.server: localhost
   rtty.port: 5912
   rtty.timeout: 60
   rtty.viewport: 5913
-  rtty.assets: $OWGW_ROOT/rtty_ui
-  # RADIUS proxy
-  radius.proxy.enable: "true"
-  radius.proxy.accounting.port: 1813
-  radius.proxy.authentication.port: 1812
-  radius.proxy.coa.port: 3799
   # ALB
   alb.enable: "true"
   alb.port: 16102
@@ -263,10 +201,6 @@ configProperties:
   openwifi.kafka.brokerlist: localhost:9092
   openwifi.kafka.auto.commit: false
   openwifi.kafka.queue.buffering.max.ms: 50
-  openwifi.kafka.ssl.ca.location: ""
-  openwifi.kafka.ssl.certificate.location: ""
-  openwifi.kafka.ssl.key.location: ""
-  openwifi.kafka.ssl.key.password: ""
   # Storage
   storage.type: sqlite # (sqlite|postgresql|mysql|odbc)
   ## SQLite
@@ -293,23 +227,24 @@ configProperties:
   openwifi.system.debug: "true"
   openwifi.system.uri.private: https://localhost:17002
   openwifi.system.uri.public: https://localhost:16002
-  openwifi.system.uri.ui: https://localhost
   openwifi.system.commandchannel: /tmp/app_owgw
   # Logging
-  logging.type: console
-  logging.path: $OWGW_ROOT/logs
-  logging.level: debug
-  # Archiving
-  archiver.enabled: "true"
-  archiver.schedule: 03:00
-  archiver.db.0.name: healthchecks
-  archiver.db.0.keep: 7
-  archiver.db.1.name: statistics
-  archiver.db.1.keep: 7
-  archiver.db.2.name: devicelogs
-  archiver.db.2.keep: 7
-  archiver.db.3.name: commandlist
-  archiver.db.3.keep: 7
+  logging.formatters.f1.class: PatternFormatter
+  logging.formatters.f1.pattern: "%Y-%m-%d %H:%M:%S %s: [%p] %t"
+  logging.formatters.f1.times: UTC
+  logging.channels.c1.class: ConsoleChannel
+  logging.channels.c1.formatter: f1
+  logging.channels.c2.class: FileChannel
+  logging.channels.c2.path: /tmp/log_owgw
+  logging.channels.c2.formatter.class: PatternFormatter
+  logging.channels.c2.formatter.pattern: "%Y-%m-%d %H:%M:%S %s: [%p] %t"
+  logging.channels.c2.rotation: "20 M"
+  logging.channels.c2.archive: timestamp
+  logging.channels.c2.purgeCount: 20
+  logging.channels.c3.class: ConsoleChannel
+  logging.channels.c3.pattern: "%s: [%p] %t"
+  logging.loggers.root.channel: c1
+  logging.loggers.root.level: debug
 
   # -> Secret part
   # Websocket
@@ -333,22 +268,166 @@ configProperties:
   storage.type.mysql.username: stephb
   storage.type.mysql.password: snoopy99
 
-# NOTE: List of required certificates may be found in "certs" key. Alternative way to pass required certificates is to create external secret with all required certificates and set secret name in "existingCertsSecret" key. Details may be found in https://github.com/Telecominfraproject/wlan-cloud-ucentral-deploy/tree/main/chart#tldr
-existingCertsSecret: ""
-
 certs:
-  clientcas.pem: ""
-  issuer.pem: ""
-  restapi-ca.pem: ""
-  restapi-cert.pem: ""
-  restapi-key.pem: ""
-  root.pem: ""
-  websocket-cert.pem: ""
-  websocket-key.pem: ""
+  clientcas.pem: |
+    -----BEGIN CERTIFICATE-----
+    MIIEnDCCA4SgAwIBAgIUVpyCUx1MUeUwxg+7I1BvGFTz7HkwDQYJKoZIhvcNAQEL
+    BQAwaTELMAkGA1UEBhMCVVMxJDAiBgNVBAoTG1RlbGVjb20gSW5mcmEgUHJvamVj
+    dCwgSW5jLjEMMAoGA1UECxMDVElQMSYwJAYDVQQDEx1UZWxlY29tIEluZnJhIFBy
+    b2plY3QgUm9vdCBDQTAeFw0yMTA0MTMyMjUxMjZaFw0yNjA0MTMyMjM4NDZaMGwx
+    CzAJBgNVBAYTAlVTMSQwIgYDVQQKExtUZWxlY29tIEluZnJhIFByb2plY3QsIElu
+    Yy4xDDAKBgNVBAsTA1RJUDEpMCcGA1UEAxMgVGVsZWNvbSBJbmZyYSBQcm9qZWN0
+    IElzc3VpbmcgQ0EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDtKBrq
+    qd2aKVSk25KfL5xHu8X7/8rJrz3IvyPuVKWhk/N1zabot3suBcGaYNKjnRHxg78R
+    yKwKzajKYWtiQFqztu24g16LQeAnoUxZnF6a0z3JkkRPsz14A2y8TUhdEe1tx+UU
+    4VGsk3n+FMmOQHL+79FO57zQC1LwylgfLSltrI6mF3jowVUQvnwzKhUzT87AJ6EO
+    ndK/q0T/Bgi+aI39zfVOjJjsTJwghvrmYW3iarP1THSKxeib2s02bZKrvvHa5HL4
+    UI8+LvREpVZl4mzt1z6Nl344Y6f+UeJlYa/Ci0jJqaXJmyVnUbAz+c0i5JfwAVn3
+    YQzfC4eLnZCmdF8zAgMBAAGjggE3MIIBMzAPBgNVHRMBAf8EBTADAQH/MB0GA1Ud
+    DgQWBBSzG1S44EerPfM4gOQ85f0AYW3R6DAfBgNVHSMEGDAWgBQCRpZgebFT9qny
+    98WfIUDk6ZEB+jAOBgNVHQ8BAf8EBAMCAYYwgYMGCCsGAQUFBwEBBHcwdTAoBggr
+    BgEFBQcwAYYcaHR0cDovL29jc3Aub25lLmRpZ2ljZXJ0LmNvbTBJBggrBgEFBQcw
+    AoY9aHR0cDovL2NhY2VydHMub25lLmRpZ2ljZXJ0LmNvbS9UZWxlY29tSW5mcmFQ
+    cm9qZWN0Um9vdENBLmNydDBKBgNVHR8EQzBBMD+gPaA7hjlodHRwOi8vY3JsLm9u
+    ZS5kaWdpY2VydC5jb20vVGVsZWNvbUluZnJhUHJvamVjdFJvb3RDQS5jcmwwDQYJ
+    KoZIhvcNAQELBQADggEBAFbz+K94bHIkBMJqps0dApniUmOn0pO6Q6cGh47UP/kX
+    IiPIsnYgG+hqYD/qtsiqJhaWi0hixRWn38UmvZxMRk27aSTGE/TWx0JTC3qDGsSe
+    XkUagumbSfmS0ZyiTwMPeGAjXwyzGorqZWeA95eKfImntMiOf3E7//GK0K7HpCx8
+    IPCnLZsZD2q/mLyBsduImFIRQJbLAhwIxpcd1qYJk+BlGFL+HtBpEbq6JxW2Xy+v
+    DpNWc2WIsUTle0rTc9JNJrLX4ChUJmKqf8obKHap3Xh3//qw/jDB9pOAinA33FLJ
+    EmCnwBvQr9mfNmPBGMYZVU8cPruDQJ57GjmmvdisbJY=
+    -----END CERTIFICATE-----
+    -----BEGIN CERTIFICATE-----
+    MIIDojCCAoqgAwIBAgIUPVYBpqNbcLYygF6Mx+qxSWwQyFowDQYJKoZIhvcNAQEL
+    BQAwaTELMAkGA1UEBhMCVVMxJDAiBgNVBAoTG1RlbGVjb20gSW5mcmEgUHJvamVj
+    dCwgSW5jLjEMMAoGA1UECxMDVElQMSYwJAYDVQQDEx1UZWxlY29tIEluZnJhIFBy
+    b2plY3QgUm9vdCBDQTAeFw0yMTA0MTMyMjQyNDRaFw0zMTA0MTMyMjM4NDZaMGkx
+    CzAJBgNVBAYTAlVTMSQwIgYDVQQKExtUZWxlY29tIEluZnJhIFByb2plY3QsIElu
+    Yy4xDDAKBgNVBAsTA1RJUDEmMCQGA1UEAxMdVGVsZWNvbSBJbmZyYSBQcm9qZWN0
+    IFJvb3QgQ0EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDIGCibwf5u
+    AAwZ+1H8U0e3u2V+0d2gSctucoK86XwUmfe1V2a/qlCYZd29r80IuN1IIeB0naIm
+    KnK/MzXW87clF6tFd1+HzEvmlY/W4KyIXalVCTEzirFSvBEG2oZpM0yC3AefytAO
+    aOpA00LaM3xTfTqMKIRhJBuLy0I4ANUVG6ixVebbGuc78IodleqiLoWy2Q9QHyEO
+    t/7hZndJhiVogh0PveRhho45EbsACu7ymDY+JhlIleevqwlE3iQoq0YcmYADHno6
+    Eq8vcwLpZFxihupUafkd1T3WJYQAJf9coCjBu2qIhNgrcrGD8R9fGswwNRzMRMpX
+    720+GjcDW3bJAgMBAAGjQjBAMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFAJG
+    lmB5sVP2qfL3xZ8hQOTpkQH6MA4GA1UdDwEB/wQEAwIBhjANBgkqhkiG9w0BAQsF
+    AAOCAQEAVjl9dm4epG9NUYnagT9sg7scVQEPfz3Lt6w1NXJXgD8mAUlK0jXmEyvM
+    dCPD4514n+8+lM7US8fh+nxc7jO//LwK17Wm9FblgjNFR7+anv0Q99T9fP19DLlF
+    PSNHL2emogy1bl1lLTAoj8nxg2wVKPDSHBGviQ5LR9fsWUIJDv9Bs5k0qWugWYSj
+    19S6qnHeskRDB8MqRLhKMG82oDVLerSnhD0P6HjySBHgTTU7/tYS/OZr1jI6MPbG
+    L+/DtiR5fDVMNdBSGU89UNTi0wHY9+RFuNlIuvZC+x/swF0V9R5mN+ywquTPtDLA
+    5IOM7ItsRmen6u3qu+JXros54e4juQ==
+    -----END CERTIFICATE-----
+  issuer.pem: |
+    -----BEGIN CERTIFICATE-----
+    MIIEnDCCA4SgAwIBAgIUVpyCUx1MUeUwxg+7I1BvGFTz7HkwDQYJKoZIhvcNAQEL
+    BQAwaTELMAkGA1UEBhMCVVMxJDAiBgNVBAoTG1RlbGVjb20gSW5mcmEgUHJvamVj
+    dCwgSW5jLjEMMAoGA1UECxMDVElQMSYwJAYDVQQDEx1UZWxlY29tIEluZnJhIFBy
+    b2plY3QgUm9vdCBDQTAeFw0yMTA0MTMyMjUxMjZaFw0yNjA0MTMyMjM4NDZaMGwx
+    CzAJBgNVBAYTAlVTMSQwIgYDVQQKExtUZWxlY29tIEluZnJhIFByb2plY3QsIElu
+    Yy4xDDAKBgNVBAsTA1RJUDEpMCcGA1UEAxMgVGVsZWNvbSBJbmZyYSBQcm9qZWN0
+    IElzc3VpbmcgQ0EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDtKBrq
+    qd2aKVSk25KfL5xHu8X7/8rJrz3IvyPuVKWhk/N1zabot3suBcGaYNKjnRHxg78R
+    yKwKzajKYWtiQFqztu24g16LQeAnoUxZnF6a0z3JkkRPsz14A2y8TUhdEe1tx+UU
+    4VGsk3n+FMmOQHL+79FO57zQC1LwylgfLSltrI6mF3jowVUQvnwzKhUzT87AJ6EO
+    ndK/q0T/Bgi+aI39zfVOjJjsTJwghvrmYW3iarP1THSKxeib2s02bZKrvvHa5HL4
+    UI8+LvREpVZl4mzt1z6Nl344Y6f+UeJlYa/Ci0jJqaXJmyVnUbAz+c0i5JfwAVn3
+    YQzfC4eLnZCmdF8zAgMBAAGjggE3MIIBMzAPBgNVHRMBAf8EBTADAQH/MB0GA1Ud
+    DgQWBBSzG1S44EerPfM4gOQ85f0AYW3R6DAfBgNVHSMEGDAWgBQCRpZgebFT9qny
+    98WfIUDk6ZEB+jAOBgNVHQ8BAf8EBAMCAYYwgYMGCCsGAQUFBwEBBHcwdTAoBggr
+    BgEFBQcwAYYcaHR0cDovL29jc3Aub25lLmRpZ2ljZXJ0LmNvbTBJBggrBgEFBQcw
+    AoY9aHR0cDovL2NhY2VydHMub25lLmRpZ2ljZXJ0LmNvbS9UZWxlY29tSW5mcmFQ
+    cm9qZWN0Um9vdENBLmNydDBKBgNVHR8EQzBBMD+gPaA7hjlodHRwOi8vY3JsLm9u
+    ZS5kaWdpY2VydC5jb20vVGVsZWNvbUluZnJhUHJvamVjdFJvb3RDQS5jcmwwDQYJ
+    KoZIhvcNAQELBQADggEBAFbz+K94bHIkBMJqps0dApniUmOn0pO6Q6cGh47UP/kX
+    IiPIsnYgG+hqYD/qtsiqJhaWi0hixRWn38UmvZxMRk27aSTGE/TWx0JTC3qDGsSe
+    XkUagumbSfmS0ZyiTwMPeGAjXwyzGorqZWeA95eKfImntMiOf3E7//GK0K7HpCx8
+    IPCnLZsZD2q/mLyBsduImFIRQJbLAhwIxpcd1qYJk+BlGFL+HtBpEbq6JxW2Xy+v
+    DpNWc2WIsUTle0rTc9JNJrLX4ChUJmKqf8obKHap3Xh3//qw/jDB9pOAinA33FLJ
+    EmCnwBvQr9mfNmPBGMYZVU8cPruDQJ57GjmmvdisbJY=
+    -----END CERTIFICATE-----
+  # restapi-ca.pem: ""
+  # restapi-cert.pem: ""
+  # restapi-key.pem: ""
+  root.pem: |
+    -----BEGIN CERTIFICATE-----
+    MIIDojCCAoqgAwIBAgIUPVYBpqNbcLYygF6Mx+qxSWwQyFowDQYJKoZIhvcNAQEL
+    BQAwaTELMAkGA1UEBhMCVVMxJDAiBgNVBAoTG1RlbGVjb20gSW5mcmEgUHJvamVj
+    dCwgSW5jLjEMMAoGA1UECxMDVElQMSYwJAYDVQQDEx1UZWxlY29tIEluZnJhIFBy
+    b2plY3QgUm9vdCBDQTAeFw0yMTA0MTMyMjQyNDRaFw0zMTA0MTMyMjM4NDZaMGkx
+    CzAJBgNVBAYTAlVTMSQwIgYDVQQKExtUZWxlY29tIEluZnJhIFByb2plY3QsIElu
+    Yy4xDDAKBgNVBAsTA1RJUDEmMCQGA1UEAxMdVGVsZWNvbSBJbmZyYSBQcm9qZWN0
+    IFJvb3QgQ0EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDIGCibwf5u
+    AAwZ+1H8U0e3u2V+0d2gSctucoK86XwUmfe1V2a/qlCYZd29r80IuN1IIeB0naIm
+    KnK/MzXW87clF6tFd1+HzEvmlY/W4KyIXalVCTEzirFSvBEG2oZpM0yC3AefytAO
+    aOpA00LaM3xTfTqMKIRhJBuLy0I4ANUVG6ixVebbGuc78IodleqiLoWy2Q9QHyEO
+    t/7hZndJhiVogh0PveRhho45EbsACu7ymDY+JhlIleevqwlE3iQoq0YcmYADHno6
+    Eq8vcwLpZFxihupUafkd1T3WJYQAJf9coCjBu2qIhNgrcrGD8R9fGswwNRzMRMpX
+    720+GjcDW3bJAgMBAAGjQjBAMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFAJG
+    lmB5sVP2qfL3xZ8hQOTpkQH6MA4GA1UdDwEB/wQEAwIBhjANBgkqhkiG9w0BAQsF
+    AAOCAQEAVjl9dm4epG9NUYnagT9sg7scVQEPfz3Lt6w1NXJXgD8mAUlK0jXmEyvM
+    dCPD4514n+8+lM7US8fh+nxc7jO//LwK17Wm9FblgjNFR7+anv0Q99T9fP19DLlF
+    PSNHL2emogy1bl1lLTAoj8nxg2wVKPDSHBGviQ5LR9fsWUIJDv9Bs5k0qWugWYSj
+    19S6qnHeskRDB8MqRLhKMG82oDVLerSnhD0P6HjySBHgTTU7/tYS/OZr1jI6MPbG
+    L+/DtiR5fDVMNdBSGU89UNTi0wHY9+RFuNlIuvZC+x/swF0V9R5mN+ywquTPtDLA
+    5IOM7ItsRmen6u3qu+JXros54e4juQ==
+    -----END CERTIFICATE-----
+  # websocket-cert.pem: ""
+  # websocket-key.pem: ""
 
 certsCAs:
-  issuer.pem: ""
-  root.pem: ""
+  issuer.pem: |
+    -----BEGIN CERTIFICATE-----
+    MIIEnDCCA4SgAwIBAgIUVpyCUx1MUeUwxg+7I1BvGFTz7HkwDQYJKoZIhvcNAQEL
+    BQAwaTELMAkGA1UEBhMCVVMxJDAiBgNVBAoTG1RlbGVjb20gSW5mcmEgUHJvamVj
+    dCwgSW5jLjEMMAoGA1UECxMDVElQMSYwJAYDVQQDEx1UZWxlY29tIEluZnJhIFBy
+    b2plY3QgUm9vdCBDQTAeFw0yMTA0MTMyMjUxMjZaFw0yNjA0MTMyMjM4NDZaMGwx
+    CzAJBgNVBAYTAlVTMSQwIgYDVQQKExtUZWxlY29tIEluZnJhIFByb2plY3QsIElu
+    Yy4xDDAKBgNVBAsTA1RJUDEpMCcGA1UEAxMgVGVsZWNvbSBJbmZyYSBQcm9qZWN0
+    IElzc3VpbmcgQ0EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDtKBrq
+    qd2aKVSk25KfL5xHu8X7/8rJrz3IvyPuVKWhk/N1zabot3suBcGaYNKjnRHxg78R
+    yKwKzajKYWtiQFqztu24g16LQeAnoUxZnF6a0z3JkkRPsz14A2y8TUhdEe1tx+UU
+    4VGsk3n+FMmOQHL+79FO57zQC1LwylgfLSltrI6mF3jowVUQvnwzKhUzT87AJ6EO
+    ndK/q0T/Bgi+aI39zfVOjJjsTJwghvrmYW3iarP1THSKxeib2s02bZKrvvHa5HL4
+    UI8+LvREpVZl4mzt1z6Nl344Y6f+UeJlYa/Ci0jJqaXJmyVnUbAz+c0i5JfwAVn3
+    YQzfC4eLnZCmdF8zAgMBAAGjggE3MIIBMzAPBgNVHRMBAf8EBTADAQH/MB0GA1Ud
+    DgQWBBSzG1S44EerPfM4gOQ85f0AYW3R6DAfBgNVHSMEGDAWgBQCRpZgebFT9qny
+    98WfIUDk6ZEB+jAOBgNVHQ8BAf8EBAMCAYYwgYMGCCsGAQUFBwEBBHcwdTAoBggr
+    BgEFBQcwAYYcaHR0cDovL29jc3Aub25lLmRpZ2ljZXJ0LmNvbTBJBggrBgEFBQcw
+    AoY9aHR0cDovL2NhY2VydHMub25lLmRpZ2ljZXJ0LmNvbS9UZWxlY29tSW5mcmFQ
+    cm9qZWN0Um9vdENBLmNydDBKBgNVHR8EQzBBMD+gPaA7hjlodHRwOi8vY3JsLm9u
+    ZS5kaWdpY2VydC5jb20vVGVsZWNvbUluZnJhUHJvamVjdFJvb3RDQS5jcmwwDQYJ
+    KoZIhvcNAQELBQADggEBAFbz+K94bHIkBMJqps0dApniUmOn0pO6Q6cGh47UP/kX
+    IiPIsnYgG+hqYD/qtsiqJhaWi0hixRWn38UmvZxMRk27aSTGE/TWx0JTC3qDGsSe
+    XkUagumbSfmS0ZyiTwMPeGAjXwyzGorqZWeA95eKfImntMiOf3E7//GK0K7HpCx8
+    IPCnLZsZD2q/mLyBsduImFIRQJbLAhwIxpcd1qYJk+BlGFL+HtBpEbq6JxW2Xy+v
+    DpNWc2WIsUTle0rTc9JNJrLX4ChUJmKqf8obKHap3Xh3//qw/jDB9pOAinA33FLJ
+    EmCnwBvQr9mfNmPBGMYZVU8cPruDQJ57GjmmvdisbJY=
+    -----END CERTIFICATE-----
+  root.pem: |
+    -----BEGIN CERTIFICATE-----
+    MIIDojCCAoqgAwIBAgIUPVYBpqNbcLYygF6Mx+qxSWwQyFowDQYJKoZIhvcNAQEL
+    BQAwaTELMAkGA1UEBhMCVVMxJDAiBgNVBAoTG1RlbGVjb20gSW5mcmEgUHJvamVj
+    dCwgSW5jLjEMMAoGA1UECxMDVElQMSYwJAYDVQQDEx1UZWxlY29tIEluZnJhIFBy
+    b2plY3QgUm9vdCBDQTAeFw0yMTA0MTMyMjQyNDRaFw0zMTA0MTMyMjM4NDZaMGkx
+    CzAJBgNVBAYTAlVTMSQwIgYDVQQKExtUZWxlY29tIEluZnJhIFByb2plY3QsIElu
+    Yy4xDDAKBgNVBAsTA1RJUDEmMCQGA1UEAxMdVGVsZWNvbSBJbmZyYSBQcm9qZWN0
+    IFJvb3QgQ0EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDIGCibwf5u
+    AAwZ+1H8U0e3u2V+0d2gSctucoK86XwUmfe1V2a/qlCYZd29r80IuN1IIeB0naIm
+    KnK/MzXW87clF6tFd1+HzEvmlY/W4KyIXalVCTEzirFSvBEG2oZpM0yC3AefytAO
+    aOpA00LaM3xTfTqMKIRhJBuLy0I4ANUVG6ixVebbGuc78IodleqiLoWy2Q9QHyEO
+    t/7hZndJhiVogh0PveRhho45EbsACu7ymDY+JhlIleevqwlE3iQoq0YcmYADHno6
+    Eq8vcwLpZFxihupUafkd1T3WJYQAJf9coCjBu2qIhNgrcrGD8R9fGswwNRzMRMpX
+    720+GjcDW3bJAgMBAAGjQjBAMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFAJG
+    lmB5sVP2qfL3xZ8hQOTpkQH6MA4GA1UdDwEB/wQEAwIBhjANBgkqhkiG9w0BAQsF
+    AAOCAQEAVjl9dm4epG9NUYnagT9sg7scVQEPfz3Lt6w1NXJXgD8mAUlK0jXmEyvM
+    dCPD4514n+8+lM7US8fh+nxc7jO//LwK17Wm9FblgjNFR7+anv0Q99T9fP19DLlF
+    PSNHL2emogy1bl1lLTAoj8nxg2wVKPDSHBGviQ5LR9fsWUIJDv9Bs5k0qWugWYSj
+    19S6qnHeskRDB8MqRLhKMG82oDVLerSnhD0P6HjySBHgTTU7/tYS/OZr1jI6MPbG
+    L+/DtiR5fDVMNdBSGU89UNTi0wHY9+RFuNlIuvZC+x/swF0V9R5mN+ywquTPtDLA
+    5IOM7ItsRmen6u3qu+JXros54e4juQ==
+    -----END CERTIFICATE-----
 
 # PostgreSQL (https://github.com/bitnami/charts/tree/master/bitnami/postgresql)
 postgresql:

images/OpenWiFi_BadgeLogo_BlackonWhite.svg

@@ -0,0 +1,158 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 24.2.3, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 141.5 185.6" style="enable-background:new 0 0 141.5 185.6;" xml:space="preserve">
+<style type="text/css">
+	.st0{fill:#FFFFFF;}
+</style>
+<g>
+	<g>
+		<path class="st0" d="M120.7,183.9H21.5c-10.8,0-19.5-8.7-19.5-19.5V20.5c0-10.8,8.7-19.5,19.5-19.5h99.2
+			c10.8,0,19.5,8.7,19.5,19.5v143.9C140.2,175.2,131.5,183.9,120.7,183.9z"/>
+		<g>
+			<g>
+				<g>
+					<path d="M46.3,166.2v-3.4h-1.2v-0.6h3.1v0.6H47v3.4H46.3z"/>
+				</g>
+				<g>
+					<path d="M49,166.2v-4h2.7v0.6h-2v1h2v0.6h-2v1.1h2v0.6H49z"/>
+				</g>
+				<g>
+					<path d="M52.6,166.2v-4h0.7v3.4h1.8v0.6H52.6z"/>
+				</g>
+				<g>
+					<path d="M55.7,166.2v-4h2.7v0.6h-2v1h2v0.6h-2v1.1h2v0.6H55.7z"/>
+				</g>
+				<g>
+					<path d="M59.1,164.2c0-1.2,0.9-2.1,2.1-2.1c0.8,0,1.3,0.4,1.6,0.9l-0.6,0.3c-0.2-0.3-0.6-0.6-1-0.6c-0.8,0-1.4,0.6-1.4,1.4
+						c0,0.8,0.6,1.4,1.4,1.4c0.4,0,0.8-0.3,1-0.6l0.6,0.3c-0.3,0.5-0.8,0.9-1.6,0.9C60,166.3,59.1,165.5,59.1,164.2z"/>
+				</g>
+				<g>
+					<path d="M63.2,164.2c0-1.2,0.8-2.1,2-2.1c1.2,0,2,0.9,2,2.1c0,1.2-0.8,2.1-2,2.1C64,166.3,63.2,165.4,63.2,164.2z M66.5,164.2
+						c0-0.8-0.5-1.4-1.3-1.4c-0.8,0-1.3,0.6-1.3,1.4c0,0.8,0.5,1.4,1.3,1.4C66,165.7,66.5,165,66.5,164.2z"/>
+				</g>
+				<g>
+					<path d="M71.3,166.2v-3.1l-1.2,3.1h-0.3l-1.2-3.1v3.1h-0.7v-4h1l1.1,2.7l1.1-2.7h1v4H71.3z"/>
+				</g>
+				<g>
+					<path d="M75.7,166.2v-4h0.7v4H75.7z"/>
+				</g>
+				<g>
+					<path d="M80.4,166.2l-2.1-2.8v2.8h-0.7v-4h0.7l2,2.8v-2.8h0.7v4H80.4z"/>
+				</g>
+				<g>
+					<path d="M82.3,166.2v-4H85v0.6h-2v1h2v0.6h-2v1.7H82.3z"/>
+				</g>
+				<g>
+					<path d="M87.9,166.2l-0.9-1.5h-0.7v1.5h-0.7v-4h1.7c0.8,0,1.3,0.5,1.3,1.2c0,0.7-0.5,1.1-0.9,1.2l1,1.6H87.9z M88,163.5
+						c0-0.4-0.3-0.6-0.7-0.6h-1v1.3h1C87.7,164.1,88,163.9,88,163.5z"/>
+				</g>
+				<g>
+					<path d="M92.4,166.2l-0.3-0.8h-1.8l-0.3,0.8h-0.8l1.6-4h0.9l1.6,4H92.4z M91.2,162.9l-0.7,1.9h1.4L91.2,162.9z"/>
+				</g>
+				<g>
+					<path d="M95.8,166.2v-4h1.5c0.8,0,1.2,0.5,1.2,1.2c0,0.6-0.4,1.2-1.2,1.2h-1.2v1.7H95.8z M98.2,163.4c0-0.5-0.3-0.9-0.9-0.9
+						h-1.1v1.7h1.1C97.8,164.3,98.2,163.9,98.2,163.4z"/>
+				</g>
+				<g>
+					<path d="M101.5,166.2l-1.1-1.6h-0.9v1.6h-0.3v-4h1.5c0.7,0,1.2,0.4,1.2,1.2c0,0.7-0.5,1.1-1.1,1.1l1.2,1.7H101.5z M101.6,163.4
+						c0-0.5-0.4-0.9-0.9-0.9h-1.1v1.7h1.1C101.2,164.3,101.6,163.9,101.6,163.4z"/>
+				</g>
+				<g>
+					<path d="M102.8,164.2c0-1.2,0.8-2.1,1.9-2.1c1.2,0,1.9,0.9,1.9,2.1c0,1.2-0.8,2.1-1.9,2.1C103.6,166.3,102.8,165.4,102.8,164.2
+						z M106.3,164.2c0-1-0.6-1.7-1.6-1.7c-1,0-1.6,0.7-1.6,1.7c0,1,0.6,1.7,1.6,1.7C105.7,166,106.3,165.2,106.3,164.2z"/>
+				</g>
+				<g>
+					<path d="M106.9,165.8l0.2-0.3c0.2,0.2,0.4,0.4,0.8,0.4c0.5,0,0.9-0.4,0.9-0.9v-2.8h0.3v2.8c0,0.8-0.5,1.2-1.2,1.2
+						C107.5,166.3,107.2,166.1,106.9,165.8z"/>
+				</g>
+				<g>
+					<path d="M110.4,166.2v-4h2.5v0.3h-2.2v1.5h2.1v0.3h-2.1v1.6h2.2v0.3H110.4z"/>
+				</g>
+				<g>
+					<path d="M113.5,164.2c0-1.2,0.9-2.1,2-2.1c0.6,0,1.1,0.3,1.5,0.7l-0.3,0.2c-0.3-0.3-0.7-0.6-1.2-0.6c-0.9,0-1.7,0.7-1.7,1.7
+						c0,1,0.7,1.7,1.7,1.7c0.5,0,0.9-0.2,1.2-0.6l0.3,0.2c-0.4,0.4-0.8,0.7-1.5,0.7C114.4,166.3,113.5,165.5,113.5,164.2z"/>
+				</g>
+				<g>
+					<path d="M118.7,166.2v-3.7h-1.3v-0.3h2.9v0.3H119v3.7H118.7z"/>
+				</g>
+			</g>
+			<g>
+				<polygon points="26.3,163.8 31.6,158.5 36.9,163.8 37.7,163.8 31.6,157.6 25.5,163.8 				"/>
+				<polygon points="36.9,164.7 31.6,170 26.3,164.7 25.5,164.7 31.6,170.8 37.7,164.7 				"/>
+				<polygon points="31,163.8 36.3,158.5 41.6,163.8 42.5,163.8 36.3,157.6 30.2,163.8 				"/>
+				<polygon points="41.6,164.7 36.3,170 31,164.7 30.2,164.7 36.3,170.8 42.5,164.7 				"/>
+			</g>
+		</g>
+		<g>
+			<path d="M33.2,100.7c-4.6,0-8.3,3.7-8.3,8.3s3.7,8.3,8.3,8.3s8.3-3.7,8.3-8.3S37.8,100.7,33.2,100.7z"/>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path d="M33.2,35.2c40.7,0,73.8,33.1,73.8,73.8c0,0.7,0,1.4,0,2.1c0,1.7,0.6,3.3,1.7,4.6c1.2,1.2,2.8,1.9,4.5,2l0.2,0
+						c3.5,0,6.3-2.7,6.4-6.2c0-0.8,0-1.7,0-2.5c0-47.7-38.8-86.6-86.6-86.6c-0.8,0-1.7,0-2.5,0c-1.7,0-3.3,0.8-4.5,2
+						c-1.2,1.2-1.8,2.9-1.7,4.6c0.1,3.5,3,6.3,6.6,6.2C31.8,35.2,32.5,35.2,33.2,35.2z"/>
+				</g>
+			</g>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path d="M33.2,60.5c26.7,0,48.5,21.7,48.5,48.5c0,0.6,0,1.3,0,2c-0.1,1.7,0.5,3.3,1.7,4.6c1.2,1.3,2.7,2,4.4,2.1
+						c1.7,0.1,3.3-0.5,4.6-1.7c1.2-1.2,2-2.7,2-4.4c0-0.9,0.1-1.8,0.1-2.6c0-33.8-27.5-61.2-61.2-61.2c-0.8,0-1.6,0-2.6,0.1
+						c-1.7,0.1-3.3,0.8-4.4,2.1c-1.2,1.3-1.8,2.9-1.7,4.6s0.8,3.3,2.1,4.4c1.3,1.2,2.9,1.8,4.6,1.7C31.9,60.5,32.6,60.5,33.2,60.5z"
+						/>
+				</g>
+			</g>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path d="M33.2,86.7c12.3,0,22.3,10,22.3,22.3c0,0.5,0,1.1-0.1,1.8c-0.3,3.5,2.3,6.6,5.8,6.9c3.5,0.3,6.6-2.3,6.9-5.8
+						c0.1-1,0.1-1.9,0.1-2.8c0-19.3-15.7-35.1-35.1-35.1c-0.9,0-1.8,0-2.8,0.1c-1.7,0.1-3.2,0.9-4.3,2.2c-1.1,1.3-1.6,2.9-1.5,4.6
+						c0.1,1.7,0.9,3.2,2.2,4.3c1.3,1.1,2.9,1.6,4.6,1.5C32.1,86.7,32.7,86.7,33.2,86.7z"/>
+				</g>
+			</g>
+		</g>
+	</g>
+	<g>
+		<path d="M35.8,130.4c1.1,0.6,2.1,1.5,2.7,2.6c0.7,1.1,1,2.3,1,3.7s-0.3,2.6-1,3.7c-0.7,1.1-1.6,2-2.7,2.6c-1.1,0.6-2.4,1-3.8,1
+			s-2.7-0.3-3.8-1c-1.1-0.6-2.1-1.5-2.7-2.6c-0.7-1.1-1-2.3-1-3.7c0-1.3,0.3-2.6,1-3.7c0.7-1.1,1.6-2,2.7-2.6
+			c1.1-0.6,2.4-0.9,3.8-0.9C33.4,129.5,34.7,129.8,35.8,130.4z M29.9,132.9c-0.7,0.4-1.2,0.9-1.6,1.6s-0.6,1.4-0.6,2.2
+			c0,0.8,0.2,1.6,0.6,2.3c0.4,0.7,0.9,1.2,1.6,1.6c0.7,0.4,1.4,0.6,2.1,0.6c0.8,0,1.5-0.2,2.1-0.6c0.6-0.4,1.2-0.9,1.5-1.6
+			c0.4-0.7,0.6-1.4,0.6-2.3c0-0.8-0.2-1.6-0.6-2.2s-0.9-1.2-1.5-1.6c-0.6-0.4-1.4-0.6-2.1-0.6C31.3,132.3,30.6,132.5,29.9,132.9z"/>
+		<path d="M50.6,133.6c0.8,0.5,1.4,1.1,1.8,2c0.4,0.8,0.6,1.8,0.6,2.9c0,1.1-0.2,2-0.6,2.8c-0.4,0.8-1,1.5-1.8,1.9
+			c-0.8,0.5-1.6,0.7-2.6,0.7c-0.7,0-1.4-0.1-2-0.4s-1.1-0.7-1.5-1.2v5.4h-3.1V133h3.1v1.6c0.4-0.5,0.9-1,1.4-1.2s1.2-0.4,2-0.4
+			C48.9,132.9,49.8,133.1,50.6,133.6z M49.1,140.5c0.5-0.6,0.7-1.3,0.7-2.2c0-0.9-0.2-1.6-0.7-2.1c-0.5-0.6-1.1-0.8-1.9-0.8
+			s-1.4,0.3-1.9,0.8c-0.5,0.6-0.8,1.3-0.8,2.1c0,0.9,0.2,1.6,0.8,2.2s1.1,0.8,1.9,0.8S48.6,141,49.1,140.5z"/>
+		<path d="M63.4,134.4c0.9,1,1.4,2.4,1.4,4.2c0,0.3,0,0.6,0,0.7H57c0.2,0.7,0.5,1.2,1,1.6c0.5,0.4,1.1,0.6,1.8,0.6
+			c0.5,0,1-0.1,1.5-0.3s0.9-0.5,1.3-0.9l1.6,1.6c-0.5,0.6-1.2,1.1-2,1.4c-0.8,0.3-1.6,0.5-2.6,0.5c-1.1,0-2.1-0.2-3-0.7
+			s-1.5-1.1-2-1.9c-0.5-0.8-0.7-1.8-0.7-2.9c0-1.1,0.2-2.1,0.7-2.9s1.1-1.5,2-1.9c0.8-0.5,1.8-0.7,2.9-0.7
+			C61.2,132.9,62.5,133.4,63.4,134.4z M61.8,137.5c0-0.7-0.3-1.3-0.7-1.7s-1-0.6-1.7-0.6c-0.7,0-1.2,0.2-1.7,0.6
+			c-0.4,0.4-0.7,1-0.9,1.7H61.8z"/>
+		<path d="M76.2,134c0.7,0.7,1.1,1.7,1.1,3v6.8h-3.1v-5.9c0-0.7-0.2-1.2-0.6-1.6s-0.9-0.6-1.5-0.6c-0.8,0-1.4,0.3-1.8,0.8
+			c-0.4,0.5-0.7,1.2-0.7,2v5.3h-3.1V133h3.1v1.9c0.7-1.3,2-2,3.7-2C74.6,132.8,75.5,133.2,76.2,134z"/>
+		<path d="M96,129.7h3.3l-4.7,14h-3.3l-2.9-10.1l-3,10.1h-3.2l-4.7-14h3.4l3,10.7l3-10.7H90l3.1,10.7L96,129.7z"/>
+		<path d="M103.3,128.7c0.3,0.3,0.5,0.7,0.5,1.2s-0.2,0.9-0.5,1.2c-0.3,0.3-0.7,0.5-1.2,0.5c-0.5,0-0.9-0.2-1.2-0.5
+			c-0.3-0.3-0.5-0.7-0.5-1.2c0-0.5,0.2-0.9,0.5-1.2c0.3-0.3,0.7-0.5,1.2-0.5C102.6,128.2,103,128.3,103.3,128.7z M100.6,133h3.1
+			v10.8h-3.1V133z"/>
+		<path d="M106.5,129.7h10.1l0,2.6h-6.9v3.4h6.3v2.6h-6.3v5.3h-3.2V129.7z"/>
+		<path d="M120.9,128.7c0.3,0.3,0.5,0.7,0.5,1.2s-0.2,0.9-0.5,1.2c-0.3,0.3-0.7,0.5-1.2,0.5c-0.5,0-0.9-0.2-1.2-0.5
+			c-0.3-0.3-0.5-0.7-0.5-1.2c0-0.5,0.2-0.9,0.5-1.2c0.3-0.3,0.7-0.5,1.2-0.5C120.1,128.2,120.5,128.3,120.9,128.7z M118.1,133h3.1
+			v10.8h-3.1V133z"/>
+	</g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+</svg>

images/OpenWiFi_BadgeLogo_Mono.svg

@@ -0,0 +1,165 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 24.2.3, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 141.5 185.6" style="enable-background:new 0 0 141.5 185.6;" xml:space="preserve">
+<style type="text/css">
+	.st0{fill:#FFFFFF;}
+	.st1{fill:#414141;}
+	.st2{fill:#D3D3D3;}
+	.st3{fill:#808386;}
+	.st4{fill:#BCBEC0;}
+</style>
+<g>
+	<g>
+		<path class="st0" d="M120.7,183.9H21.5c-10.8,0-19.5-8.7-19.5-19.5V20.5c0-10.8,8.7-19.5,19.5-19.5h99.2
+			c10.8,0,19.5,8.7,19.5,19.5v143.9C140.2,175.2,131.5,183.9,120.7,183.9z"/>
+		<g>
+			<g>
+				<g>
+					<path class="st1" d="M46.3,166.2v-3.4h-1.2v-0.6h3.1v0.6H47v3.4H46.3z"/>
+				</g>
+				<g>
+					<path class="st1" d="M49,166.2v-4h2.7v0.6h-2v1h2v0.6h-2v1.1h2v0.6H49z"/>
+				</g>
+				<g>
+					<path class="st1" d="M52.6,166.2v-4h0.7v3.4h1.8v0.6H52.6z"/>
+				</g>
+				<g>
+					<path class="st1" d="M55.7,166.2v-4h2.7v0.6h-2v1h2v0.6h-2v1.1h2v0.6H55.7z"/>
+				</g>
+				<g>
+					<path class="st1" d="M59.1,164.2c0-1.2,0.9-2.1,2.1-2.1c0.8,0,1.3,0.4,1.6,0.9l-0.6,0.3c-0.2-0.3-0.6-0.6-1-0.6
+						c-0.8,0-1.4,0.6-1.4,1.4c0,0.8,0.6,1.4,1.4,1.4c0.4,0,0.8-0.3,1-0.6l0.6,0.3c-0.3,0.5-0.8,0.9-1.6,0.9
+						C60,166.3,59.1,165.5,59.1,164.2z"/>
+				</g>
+				<g>
+					<path class="st1" d="M63.2,164.2c0-1.2,0.8-2.1,2-2.1c1.2,0,2,0.9,2,2.1c0,1.2-0.8,2.1-2,2.1C64,166.3,63.2,165.4,63.2,164.2z
+						 M66.5,164.2c0-0.8-0.5-1.4-1.3-1.4c-0.8,0-1.3,0.6-1.3,1.4c0,0.8,0.5,1.4,1.3,1.4C66,165.7,66.5,165,66.5,164.2z"/>
+				</g>
+				<g>
+					<path class="st1" d="M71.3,166.2v-3.1l-1.2,3.1h-0.3l-1.2-3.1v3.1h-0.7v-4h1l1.1,2.7l1.1-2.7h1v4H71.3z"/>
+				</g>
+				<g>
+					<path class="st1" d="M75.7,166.2v-4h0.7v4H75.7z"/>
+				</g>
+				<g>
+					<path class="st1" d="M80.4,166.2l-2.1-2.8v2.8h-0.7v-4h0.7l2,2.8v-2.8h0.7v4H80.4z"/>
+				</g>
+				<g>
+					<path class="st1" d="M82.3,166.2v-4H85v0.6h-2v1h2v0.6h-2v1.7H82.3z"/>
+				</g>
+				<g>
+					<path class="st1" d="M87.9,166.2l-0.9-1.5h-0.7v1.5h-0.7v-4h1.7c0.8,0,1.3,0.5,1.3,1.2c0,0.7-0.5,1.1-0.9,1.2l1,1.6H87.9z
+						 M88,163.5c0-0.4-0.3-0.6-0.7-0.6h-1v1.3h1C87.7,164.1,88,163.9,88,163.5z"/>
+				</g>
+				<g>
+					<path class="st1" d="M92.4,166.2l-0.3-0.8h-1.8l-0.3,0.8h-0.8l1.6-4h0.9l1.6,4H92.4z M91.2,162.9l-0.7,1.9h1.4L91.2,162.9z"/>
+				</g>
+				<g>
+					<path class="st1" d="M95.8,166.2v-4h1.5c0.8,0,1.2,0.5,1.2,1.2c0,0.6-0.4,1.2-1.2,1.2h-1.2v1.7H95.8z M98.2,163.4
+						c0-0.5-0.3-0.9-0.9-0.9h-1.1v1.7h1.1C97.8,164.3,98.2,163.9,98.2,163.4z"/>
+				</g>
+				<g>
+					<path class="st1" d="M101.5,166.2l-1.1-1.6h-0.9v1.6h-0.3v-4h1.5c0.7,0,1.2,0.4,1.2,1.2c0,0.7-0.5,1.1-1.1,1.1l1.2,1.7H101.5z
+						 M101.6,163.4c0-0.5-0.4-0.9-0.9-0.9h-1.1v1.7h1.1C101.2,164.3,101.6,163.9,101.6,163.4z"/>
+				</g>
+				<g>
+					<path class="st1" d="M102.8,164.2c0-1.2,0.8-2.1,1.9-2.1c1.2,0,1.9,0.9,1.9,2.1c0,1.2-0.8,2.1-1.9,2.1
+						C103.6,166.3,102.8,165.4,102.8,164.2z M106.3,164.2c0-1-0.6-1.7-1.6-1.7c-1,0-1.6,0.7-1.6,1.7c0,1,0.6,1.7,1.6,1.7
+						C105.7,166,106.3,165.2,106.3,164.2z"/>
+				</g>
+				<g>
+					<path class="st1" d="M106.9,165.8l0.2-0.3c0.2,0.2,0.4,0.4,0.8,0.4c0.5,0,0.9-0.4,0.9-0.9v-2.8h0.3v2.8c0,0.8-0.5,1.2-1.2,1.2
+						C107.5,166.3,107.2,166.1,106.9,165.8z"/>
+				</g>
+				<g>
+					<path class="st1" d="M110.4,166.2v-4h2.5v0.3h-2.2v1.5h2.1v0.3h-2.1v1.6h2.2v0.3H110.4z"/>
+				</g>
+				<g>
+					<path class="st1" d="M113.5,164.2c0-1.2,0.9-2.1,2-2.1c0.6,0,1.1,0.3,1.5,0.7l-0.3,0.2c-0.3-0.3-0.7-0.6-1.2-0.6
+						c-0.9,0-1.7,0.7-1.7,1.7c0,1,0.7,1.7,1.7,1.7c0.5,0,0.9-0.2,1.2-0.6l0.3,0.2c-0.4,0.4-0.8,0.7-1.5,0.7
+						C114.4,166.3,113.5,165.5,113.5,164.2z"/>
+				</g>
+				<g>
+					<path class="st1" d="M118.7,166.2v-3.7h-1.3v-0.3h2.9v0.3H119v3.7H118.7z"/>
+				</g>
+			</g>
+			<g>
+				<polygon class="st1" points="26.3,163.8 31.6,158.5 36.9,163.8 37.7,163.8 31.6,157.6 25.5,163.8 				"/>
+				<polygon class="st1" points="36.9,164.7 31.6,170 26.3,164.7 25.5,164.7 31.6,170.8 37.7,164.7 				"/>
+				<polygon class="st1" points="31,163.8 36.3,158.5 41.6,163.8 42.5,163.8 36.3,157.6 30.2,163.8 				"/>
+				<polygon class="st1" points="41.6,164.7 36.3,170 31,164.7 30.2,164.7 36.3,170.8 42.5,164.7 				"/>
+			</g>
+		</g>
+		<g>
+			<path class="st1" d="M33.2,100.7c-4.6,0-8.3,3.7-8.3,8.3s3.7,8.3,8.3,8.3s8.3-3.7,8.3-8.3S37.8,100.7,33.2,100.7z"/>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path class="st2" d="M33.2,35.2c40.7,0,73.8,33.1,73.8,73.8c0,0.7,0,1.4,0,2.1c0,1.7,0.6,3.3,1.7,4.6c1.2,1.2,2.8,1.9,4.5,2
+						l0.2,0c3.5,0,6.3-2.7,6.4-6.2c0-0.8,0-1.7,0-2.5c0-47.7-38.8-86.6-86.6-86.6c-0.8,0-1.7,0-2.5,0c-1.7,0-3.3,0.8-4.5,2
+						c-1.2,1.2-1.8,2.9-1.7,4.6c0.1,3.5,3,6.3,6.6,6.2C31.8,35.2,32.5,35.2,33.2,35.2z"/>
+				</g>
+			</g>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path class="st3" d="M33.2,60.5c26.7,0,48.5,21.7,48.5,48.5c0,0.6,0,1.3,0,2c-0.1,1.7,0.5,3.3,1.7,4.6c1.2,1.3,2.7,2,4.4,2.1
+						c1.7,0.1,3.3-0.5,4.6-1.7c1.2-1.2,2-2.7,2-4.4c0-0.9,0.1-1.8,0.1-2.6c0-33.8-27.5-61.2-61.2-61.2c-0.8,0-1.6,0-2.6,0.1
+						c-1.7,0.1-3.3,0.8-4.4,2.1c-1.2,1.3-1.8,2.9-1.7,4.6s0.8,3.3,2.1,4.4c1.3,1.2,2.9,1.8,4.6,1.7C31.9,60.5,32.6,60.5,33.2,60.5z"
+						/>
+				</g>
+			</g>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path class="st4" d="M33.2,86.7c12.3,0,22.3,10,22.3,22.3c0,0.5,0,1.1-0.1,1.8c-0.3,3.5,2.3,6.6,5.8,6.9
+						c3.5,0.3,6.6-2.3,6.9-5.8c0.1-1,0.1-1.9,0.1-2.8c0-19.3-15.7-35.1-35.1-35.1c-0.9,0-1.8,0-2.8,0.1c-1.7,0.1-3.2,0.9-4.3,2.2
+						c-1.1,1.3-1.6,2.9-1.5,4.6c0.1,1.7,0.9,3.2,2.2,4.3c1.3,1.1,2.9,1.6,4.6,1.5C32.1,86.7,32.7,86.7,33.2,86.7z"/>
+				</g>
+			</g>
+		</g>
+	</g>
+	<g>
+		<path class="st1" d="M35.8,130.4c1.1,0.6,2.1,1.5,2.7,2.6c0.7,1.1,1,2.3,1,3.7s-0.3,2.6-1,3.7c-0.7,1.1-1.6,2-2.7,2.6
+			c-1.1,0.6-2.4,1-3.8,1s-2.7-0.3-3.8-1c-1.1-0.6-2.1-1.5-2.7-2.6c-0.7-1.1-1-2.3-1-3.7c0-1.3,0.3-2.6,1-3.7c0.7-1.1,1.6-2,2.7-2.6
+			c1.1-0.6,2.4-0.9,3.8-0.9C33.4,129.5,34.7,129.8,35.8,130.4z M29.9,132.9c-0.7,0.4-1.2,0.9-1.6,1.6s-0.6,1.4-0.6,2.2
+			c0,0.8,0.2,1.6,0.6,2.3c0.4,0.7,0.9,1.2,1.6,1.6c0.7,0.4,1.4,0.6,2.1,0.6c0.8,0,1.5-0.2,2.1-0.6c0.6-0.4,1.2-0.9,1.5-1.6
+			c0.4-0.7,0.6-1.4,0.6-2.3c0-0.8-0.2-1.6-0.6-2.2s-0.9-1.2-1.5-1.6c-0.6-0.4-1.4-0.6-2.1-0.6C31.3,132.3,30.6,132.5,29.9,132.9z"/>
+		<path class="st1" d="M50.6,133.6c0.8,0.5,1.4,1.1,1.8,2c0.4,0.8,0.6,1.8,0.6,2.9c0,1.1-0.2,2-0.6,2.8c-0.4,0.8-1,1.5-1.8,1.9
+			c-0.8,0.5-1.6,0.7-2.6,0.7c-0.7,0-1.4-0.1-2-0.4s-1.1-0.7-1.5-1.2v5.4h-3.1V133h3.1v1.6c0.4-0.5,0.9-1,1.4-1.2s1.2-0.4,2-0.4
+			C48.9,132.9,49.8,133.1,50.6,133.6z M49.1,140.5c0.5-0.6,0.7-1.3,0.7-2.2c0-0.9-0.2-1.6-0.7-2.1c-0.5-0.6-1.1-0.8-1.9-0.8
+			s-1.4,0.3-1.9,0.8c-0.5,0.6-0.8,1.3-0.8,2.1c0,0.9,0.2,1.6,0.8,2.2s1.1,0.8,1.9,0.8S48.6,141,49.1,140.5z"/>
+		<path class="st1" d="M63.4,134.4c0.9,1,1.4,2.4,1.4,4.2c0,0.3,0,0.6,0,0.7H57c0.2,0.7,0.5,1.2,1,1.6c0.5,0.4,1.1,0.6,1.8,0.6
+			c0.5,0,1-0.1,1.5-0.3s0.9-0.5,1.3-0.9l1.6,1.6c-0.5,0.6-1.2,1.1-2,1.4c-0.8,0.3-1.6,0.5-2.6,0.5c-1.1,0-2.1-0.2-3-0.7
+			s-1.5-1.1-2-1.9c-0.5-0.8-0.7-1.8-0.7-2.9c0-1.1,0.2-2.1,0.7-2.9s1.1-1.5,2-1.9c0.8-0.5,1.8-0.7,2.9-0.7
+			C61.2,132.9,62.5,133.4,63.4,134.4z M61.8,137.5c0-0.7-0.3-1.3-0.7-1.7s-1-0.6-1.7-0.6c-0.7,0-1.2,0.2-1.7,0.6
+			c-0.4,0.4-0.7,1-0.9,1.7H61.8z"/>
+		<path class="st1" d="M76.2,134c0.7,0.7,1.1,1.7,1.1,3v6.8h-3.1v-5.9c0-0.7-0.2-1.2-0.6-1.6s-0.9-0.6-1.5-0.6
+			c-0.8,0-1.4,0.3-1.8,0.8c-0.4,0.5-0.7,1.2-0.7,2v5.3h-3.1V133h3.1v1.9c0.7-1.3,2-2,3.7-2C74.6,132.8,75.5,133.2,76.2,134z"/>
+		<path class="st1" d="M96,129.7h3.3l-4.7,14h-3.3l-2.9-10.1l-3,10.1h-3.2l-4.7-14h3.4l3,10.7l3-10.7H90l3.1,10.7L96,129.7z"/>
+		<path class="st1" d="M103.3,128.7c0.3,0.3,0.5,0.7,0.5,1.2s-0.2,0.9-0.5,1.2c-0.3,0.3-0.7,0.5-1.2,0.5c-0.5,0-0.9-0.2-1.2-0.5
+			c-0.3-0.3-0.5-0.7-0.5-1.2c0-0.5,0.2-0.9,0.5-1.2c0.3-0.3,0.7-0.5,1.2-0.5C102.6,128.2,103,128.3,103.3,128.7z M100.6,133h3.1
+			v10.8h-3.1V133z"/>
+		<path class="st1" d="M106.5,129.7h10.1l0,2.6h-6.9v3.4h6.3v2.6h-6.3v5.3h-3.2V129.7z"/>
+		<path class="st1" d="M120.9,128.7c0.3,0.3,0.5,0.7,0.5,1.2s-0.2,0.9-0.5,1.2c-0.3,0.3-0.7,0.5-1.2,0.5c-0.5,0-0.9-0.2-1.2-0.5
+			c-0.3-0.3-0.5-0.7-0.5-1.2c0-0.5,0.2-0.9,0.5-1.2c0.3-0.3,0.7-0.5,1.2-0.5C120.1,128.2,120.5,128.3,120.9,128.7z M118.1,133h3.1
+			v10.8h-3.1V133z"/>
+	</g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+</svg>

images/OpenWiFi_BadgeLogo_MonoonBlack.svg

@@ -0,0 +1,171 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 24.2.3, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 141.5 185.6" style="enable-background:new 0 0 141.5 185.6;" xml:space="preserve">
+<style type="text/css">
+	.st0{fill:#FFFFFF;}
+	.st1{fill:#D3D3D3;}
+	.st2{fill:#808386;}
+	.st3{fill:#BCBEC0;}
+</style>
+<g>
+	<g>
+		<path d="M120.7,183.9H21.5c-10.8,0-19.5-8.7-19.5-19.5V20.5c0-10.8,8.7-19.5,19.5-19.5h99.2c10.8,0,19.5,8.7,19.5,19.5v143.9
+			C140.2,175.2,131.5,183.9,120.7,183.9z"/>
+		<g>
+			<g>
+				<g>
+					<g>
+						<path class="st0" d="M46.3,166.2v-3.4h-1.2v-0.6h3.1v0.6H47v3.4H46.3z"/>
+					</g>
+					<g>
+						<path class="st0" d="M49,166.2v-4h2.7v0.6h-2v1h2v0.6h-2v1.1h2v0.6H49z"/>
+					</g>
+					<g>
+						<path class="st0" d="M52.6,166.2v-4h0.7v3.4h1.8v0.6H52.6z"/>
+					</g>
+					<g>
+						<path class="st0" d="M55.7,166.2v-4h2.7v0.6h-2v1h2v0.6h-2v1.1h2v0.6H55.7z"/>
+					</g>
+					<g>
+						<path class="st0" d="M59.1,164.2c0-1.2,0.9-2.1,2.1-2.1c0.8,0,1.3,0.4,1.6,0.9l-0.6,0.3c-0.2-0.3-0.6-0.6-1-0.6
+							c-0.8,0-1.4,0.6-1.4,1.4c0,0.8,0.6,1.4,1.4,1.4c0.4,0,0.8-0.3,1-0.6l0.6,0.3c-0.3,0.5-0.8,0.9-1.6,0.9
+							C60,166.3,59.1,165.5,59.1,164.2z"/>
+					</g>
+					<g>
+						<path class="st0" d="M63.2,164.2c0-1.2,0.8-2.1,2-2.1c1.2,0,2,0.9,2,2.1c0,1.2-0.8,2.1-2,2.1C64,166.3,63.2,165.4,63.2,164.2z
+							 M66.5,164.2c0-0.8-0.5-1.4-1.3-1.4c-0.8,0-1.3,0.6-1.3,1.4c0,0.8,0.5,1.4,1.3,1.4C66,165.7,66.5,165,66.5,164.2z"/>
+					</g>
+					<g>
+						<path class="st0" d="M71.3,166.2v-3.1l-1.2,3.1h-0.3l-1.2-3.1v3.1h-0.7v-4h1l1.1,2.7l1.1-2.7h1v4H71.3z"/>
+					</g>
+					<g>
+						<path class="st0" d="M75.7,166.2v-4h0.7v4H75.7z"/>
+					</g>
+					<g>
+						<path class="st0" d="M80.4,166.2l-2.1-2.8v2.8h-0.7v-4h0.7l2,2.8v-2.8h0.7v4H80.4z"/>
+					</g>
+					<g>
+						<path class="st0" d="M82.3,166.2v-4H85v0.6h-2v1h2v0.6h-2v1.7H82.3z"/>
+					</g>
+					<g>
+						<path class="st0" d="M87.9,166.2l-0.9-1.5h-0.7v1.5h-0.7v-4h1.7c0.8,0,1.3,0.5,1.3,1.2c0,0.7-0.5,1.1-0.9,1.2l1,1.6H87.9z
+							 M88,163.5c0-0.4-0.3-0.6-0.7-0.6h-1v1.3h1C87.7,164.1,88,163.9,88,163.5z"/>
+					</g>
+					<g>
+						<path class="st0" d="M92.4,166.2l-0.3-0.8h-1.8l-0.3,0.8h-0.8l1.6-4h0.9l1.6,4H92.4z M91.2,162.9l-0.7,1.9h1.4L91.2,162.9z"/>
+					</g>
+					<g>
+						<path class="st0" d="M95.8,166.2v-4h1.5c0.8,0,1.2,0.5,1.2,1.2c0,0.6-0.4,1.2-1.2,1.2h-1.2v1.7H95.8z M98.2,163.4
+							c0-0.5-0.3-0.9-0.9-0.9h-1.1v1.7h1.1C97.8,164.3,98.2,163.9,98.2,163.4z"/>
+					</g>
+					<g>
+						<path class="st0" d="M101.5,166.2l-1.1-1.6h-0.9v1.6h-0.3v-4h1.5c0.7,0,1.2,0.4,1.2,1.2c0,0.7-0.5,1.1-1.1,1.1l1.2,1.7H101.5z
+							 M101.6,163.4c0-0.5-0.4-0.9-0.9-0.9h-1.1v1.7h1.1C101.2,164.3,101.6,163.9,101.6,163.4z"/>
+					</g>
+					<g>
+						<path class="st0" d="M102.8,164.2c0-1.2,0.8-2.1,1.9-2.1c1.2,0,1.9,0.9,1.9,2.1c0,1.2-0.8,2.1-1.9,2.1
+							C103.6,166.3,102.8,165.4,102.8,164.2z M106.3,164.2c0-1-0.6-1.7-1.6-1.7c-1,0-1.6,0.7-1.6,1.7c0,1,0.6,1.7,1.6,1.7
+							C105.7,166,106.3,165.2,106.3,164.2z"/>
+					</g>
+					<g>
+						<path class="st0" d="M106.9,165.8l0.2-0.3c0.2,0.2,0.4,0.4,0.8,0.4c0.5,0,0.9-0.4,0.9-0.9v-2.8h0.3v2.8c0,0.8-0.5,1.2-1.2,1.2
+							C107.5,166.3,107.2,166.1,106.9,165.8z"/>
+					</g>
+					<g>
+						<path class="st0" d="M110.4,166.2v-4h2.5v0.3h-2.2v1.5h2.1v0.3h-2.1v1.6h2.2v0.3H110.4z"/>
+					</g>
+					<g>
+						<path class="st0" d="M113.5,164.2c0-1.2,0.9-2.1,2-2.1c0.6,0,1.1,0.3,1.5,0.7l-0.3,0.2c-0.3-0.3-0.7-0.6-1.2-0.6
+							c-0.9,0-1.7,0.7-1.7,1.7c0,1,0.7,1.7,1.7,1.7c0.5,0,0.9-0.2,1.2-0.6l0.3,0.2c-0.4,0.4-0.8,0.7-1.5,0.7
+							C114.4,166.3,113.5,165.5,113.5,164.2z"/>
+					</g>
+					<g>
+						<path class="st0" d="M118.7,166.2v-3.7h-1.3v-0.3h2.9v0.3H119v3.7H118.7z"/>
+					</g>
+				</g>
+				<g>
+					<polygon class="st0" points="26.3,163.8 31.6,158.5 36.9,163.8 37.7,163.8 31.6,157.6 25.5,163.8 					"/>
+					<polygon class="st0" points="36.9,164.7 31.6,170 26.3,164.7 25.5,164.7 31.6,170.8 37.7,164.7 					"/>
+					<polygon class="st0" points="31,163.8 36.3,158.5 41.6,163.8 42.5,163.8 36.3,157.6 30.2,163.8 					"/>
+					<polygon class="st0" points="41.6,164.7 36.3,170 31,164.7 30.2,164.7 36.3,170.8 42.5,164.7 					"/>
+				</g>
+			</g>
+		</g>
+		<g>
+			<g>
+				<path class="st0" d="M33.2,100.7c-4.6,0-8.3,3.7-8.3,8.3s3.7,8.3,8.3,8.3s8.3-3.7,8.3-8.3S37.8,100.7,33.2,100.7z"/>
+			</g>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path class="st1" d="M33.2,35.2c40.7,0,73.8,33.1,73.8,73.8c0,0.7,0,1.4,0,2.1c0,1.7,0.6,3.3,1.7,4.6c1.2,1.2,2.8,1.9,4.5,2
+						l0.2,0c3.5,0,6.3-2.7,6.4-6.2c0-0.8,0-1.7,0-2.5c0-47.7-38.8-86.6-86.6-86.6c-0.8,0-1.7,0-2.5,0c-1.7,0-3.3,0.8-4.5,2
+						c-1.2,1.2-1.8,2.9-1.7,4.6c0.1,3.5,3,6.3,6.6,6.2C31.8,35.2,32.5,35.2,33.2,35.2z"/>
+				</g>
+			</g>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path class="st2" d="M33.2,60.5c26.7,0,48.5,21.7,48.5,48.5c0,0.6,0,1.3,0,2c-0.1,1.7,0.5,3.3,1.7,4.6c1.2,1.3,2.7,2,4.4,2.1
+						c1.7,0.1,3.3-0.5,4.6-1.7c1.2-1.2,2-2.7,2-4.4c0-0.9,0.1-1.8,0.1-2.6c0-33.8-27.5-61.2-61.2-61.2c-0.8,0-1.6,0-2.6,0.1
+						c-1.7,0.1-3.3,0.8-4.4,2.1c-1.2,1.3-1.8,2.9-1.7,4.6s0.8,3.3,2.1,4.4c1.3,1.2,2.9,1.8,4.6,1.7C31.9,60.5,32.6,60.5,33.2,60.5z"
+						/>
+				</g>
+			</g>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path class="st3" d="M33.2,86.7c12.3,0,22.3,10,22.3,22.3c0,0.5,0,1.1-0.1,1.8c-0.3,3.5,2.3,6.6,5.8,6.9
+						c3.5,0.3,6.6-2.3,6.9-5.8c0.1-1,0.1-1.9,0.1-2.8c0-19.3-15.7-35.1-35.1-35.1c-0.9,0-1.8,0-2.8,0.1c-1.7,0.1-3.2,0.9-4.3,2.2
+						c-1.1,1.3-1.6,2.9-1.5,4.6c0.1,1.7,0.9,3.2,2.2,4.3c1.3,1.1,2.9,1.6,4.6,1.5C32.1,86.7,32.7,86.7,33.2,86.7z"/>
+				</g>
+			</g>
+		</g>
+	</g>
+	<g>
+		<g>
+			<path class="st0" d="M35.8,130.4c1.1,0.6,2.1,1.5,2.7,2.6c0.7,1.1,1,2.3,1,3.7s-0.3,2.6-1,3.7c-0.7,1.1-1.6,2-2.7,2.6
+				c-1.1,0.6-2.4,1-3.8,1s-2.7-0.3-3.8-1c-1.1-0.6-2.1-1.5-2.7-2.6c-0.7-1.1-1-2.3-1-3.7c0-1.3,0.3-2.6,1-3.7c0.7-1.1,1.6-2,2.7-2.6
+				c1.1-0.6,2.4-0.9,3.8-0.9C33.4,129.5,34.7,129.8,35.8,130.4z M29.9,132.9c-0.7,0.4-1.2,0.9-1.6,1.6s-0.6,1.4-0.6,2.2
+				c0,0.8,0.2,1.6,0.6,2.3c0.4,0.7,0.9,1.2,1.6,1.6c0.7,0.4,1.4,0.6,2.1,0.6c0.8,0,1.5-0.2,2.1-0.6c0.6-0.4,1.2-0.9,1.5-1.6
+				c0.4-0.7,0.6-1.4,0.6-2.3c0-0.8-0.2-1.6-0.6-2.2s-0.9-1.2-1.5-1.6c-0.6-0.4-1.4-0.6-2.1-0.6C31.3,132.3,30.6,132.5,29.9,132.9z"
+				/>
+			<path class="st0" d="M50.6,133.6c0.8,0.5,1.4,1.1,1.8,2c0.4,0.8,0.6,1.8,0.6,2.9c0,1.1-0.2,2-0.6,2.8c-0.4,0.8-1,1.5-1.8,1.9
+				c-0.8,0.5-1.6,0.7-2.6,0.7c-0.7,0-1.4-0.1-2-0.4s-1.1-0.7-1.5-1.2v5.4h-3.1V133h3.1v1.6c0.4-0.5,0.9-1,1.4-1.2s1.2-0.4,2-0.4
+				C48.9,132.9,49.8,133.1,50.6,133.6z M49.1,140.5c0.5-0.6,0.7-1.3,0.7-2.2c0-0.9-0.2-1.6-0.7-2.1c-0.5-0.6-1.1-0.8-1.9-0.8
+				s-1.4,0.3-1.9,0.8c-0.5,0.6-0.8,1.3-0.8,2.1c0,0.9,0.2,1.6,0.8,2.2s1.1,0.8,1.9,0.8S48.6,141,49.1,140.5z"/>
+			<path class="st0" d="M63.4,134.4c0.9,1,1.4,2.4,1.4,4.2c0,0.3,0,0.6,0,0.7H57c0.2,0.7,0.5,1.2,1,1.6c0.5,0.4,1.1,0.6,1.8,0.6
+				c0.5,0,1-0.1,1.5-0.3s0.9-0.5,1.3-0.9l1.6,1.6c-0.5,0.6-1.2,1.1-2,1.4c-0.8,0.3-1.6,0.5-2.6,0.5c-1.1,0-2.1-0.2-3-0.7
+				s-1.5-1.1-2-1.9c-0.5-0.8-0.7-1.8-0.7-2.9c0-1.1,0.2-2.1,0.7-2.9s1.1-1.5,2-1.9c0.8-0.5,1.8-0.7,2.9-0.7
+				C61.2,132.9,62.5,133.4,63.4,134.4z M61.8,137.5c0-0.7-0.3-1.3-0.7-1.7s-1-0.6-1.7-0.6c-0.7,0-1.2,0.2-1.7,0.6
+				c-0.4,0.4-0.7,1-0.9,1.7H61.8z"/>
+			<path class="st0" d="M76.2,134c0.7,0.7,1.1,1.7,1.1,3v6.8h-3.1v-5.9c0-0.7-0.2-1.2-0.6-1.6s-0.9-0.6-1.5-0.6
+				c-0.8,0-1.4,0.3-1.8,0.8c-0.4,0.5-0.7,1.2-0.7,2v5.3h-3.1V133h3.1v1.9c0.7-1.3,2-2,3.7-2C74.6,132.8,75.5,133.2,76.2,134z"/>
+			<path class="st0" d="M96,129.7h3.3l-4.7,14h-3.3l-2.9-10.1l-3,10.1h-3.2l-4.7-14h3.4l3,10.7l3-10.7H90l3.1,10.7L96,129.7z"/>
+			<path class="st0" d="M103.3,128.7c0.3,0.3,0.5,0.7,0.5,1.2s-0.2,0.9-0.5,1.2c-0.3,0.3-0.7,0.5-1.2,0.5c-0.5,0-0.9-0.2-1.2-0.5
+				c-0.3-0.3-0.5-0.7-0.5-1.2c0-0.5,0.2-0.9,0.5-1.2c0.3-0.3,0.7-0.5,1.2-0.5C102.6,128.2,103,128.3,103.3,128.7z M100.6,133h3.1
+				v10.8h-3.1V133z"/>
+			<path class="st0" d="M106.5,129.7h10.1l0,2.6h-6.9v3.4h6.3v2.6h-6.3v5.3h-3.2V129.7z"/>
+			<path class="st0" d="M120.9,128.7c0.3,0.3,0.5,0.7,0.5,1.2s-0.2,0.9-0.5,1.2c-0.3,0.3-0.7,0.5-1.2,0.5c-0.5,0-0.9-0.2-1.2-0.5
+				c-0.3-0.3-0.5-0.7-0.5-1.2c0-0.5,0.2-0.9,0.5-1.2c0.3-0.3,0.7-0.5,1.2-0.5C120.1,128.2,120.5,128.3,120.9,128.7z M118.1,133h3.1
+				v10.8h-3.1V133z"/>
+		</g>
+	</g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+</svg>

images/OpenWiFi_BadgeLogo_WhiteonBlack.svg

@@ -0,0 +1,161 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 24.2.3, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 141.5 185.6" style="enable-background:new 0 0 141.5 185.6;" xml:space="preserve">
+<style type="text/css">
+	.st0{fill:#FFFFFF;}
+</style>
+<g>
+	<g>
+		<path d="M120.7,183.9H21.5c-10.8,0-19.5-8.7-19.5-19.5V20.5c0-10.8,8.7-19.5,19.5-19.5h99.2c10.8,0,19.5,8.7,19.5,19.5v143.9
+			C140.2,175.2,131.5,183.9,120.7,183.9z"/>
+		<g>
+			<g>
+				<g>
+					<path class="st0" d="M46.3,166.2v-3.4h-1.2v-0.6h3.1v0.6H47v3.4H46.3z"/>
+				</g>
+				<g>
+					<path class="st0" d="M49,166.2v-4h2.7v0.6h-2v1h2v0.6h-2v1.1h2v0.6H49z"/>
+				</g>
+				<g>
+					<path class="st0" d="M52.6,166.2v-4h0.7v3.4h1.8v0.6H52.6z"/>
+				</g>
+				<g>
+					<path class="st0" d="M55.7,166.2v-4h2.7v0.6h-2v1h2v0.6h-2v1.1h2v0.6H55.7z"/>
+				</g>
+				<g>
+					<path class="st0" d="M59.1,164.2c0-1.2,0.9-2.1,2.1-2.1c0.8,0,1.3,0.4,1.6,0.9l-0.6,0.3c-0.2-0.3-0.6-0.6-1-0.6
+						c-0.8,0-1.4,0.6-1.4,1.4c0,0.8,0.6,1.4,1.4,1.4c0.4,0,0.8-0.3,1-0.6l0.6,0.3c-0.3,0.5-0.8,0.9-1.6,0.9
+						C60,166.3,59.1,165.5,59.1,164.2z"/>
+				</g>
+				<g>
+					<path class="st0" d="M63.2,164.2c0-1.2,0.8-2.1,2-2.1c1.2,0,2,0.9,2,2.1c0,1.2-0.8,2.1-2,2.1C64,166.3,63.2,165.4,63.2,164.2z
+						 M66.5,164.2c0-0.8-0.5-1.4-1.3-1.4c-0.8,0-1.3,0.6-1.3,1.4c0,0.8,0.5,1.4,1.3,1.4C66,165.7,66.5,165,66.5,164.2z"/>
+				</g>
+				<g>
+					<path class="st0" d="M71.3,166.2v-3.1l-1.2,3.1h-0.3l-1.2-3.1v3.1h-0.7v-4h1l1.1,2.7l1.1-2.7h1v4H71.3z"/>
+				</g>
+				<g>
+					<path class="st0" d="M75.7,166.2v-4h0.7v4H75.7z"/>
+				</g>
+				<g>
+					<path class="st0" d="M80.4,166.2l-2.1-2.8v2.8h-0.7v-4h0.7l2,2.8v-2.8h0.7v4H80.4z"/>
+				</g>
+				<g>
+					<path class="st0" d="M82.3,166.2v-4H85v0.6h-2v1h2v0.6h-2v1.7H82.3z"/>
+				</g>
+				<g>
+					<path class="st0" d="M87.9,166.2l-0.9-1.5h-0.7v1.5h-0.7v-4h1.7c0.8,0,1.3,0.5,1.3,1.2c0,0.7-0.5,1.1-0.9,1.2l1,1.6H87.9z
+						 M88,163.5c0-0.4-0.3-0.6-0.7-0.6h-1v1.3h1C87.7,164.1,88,163.9,88,163.5z"/>
+				</g>
+				<g>
+					<path class="st0" d="M92.4,166.2l-0.3-0.8h-1.8l-0.3,0.8h-0.8l1.6-4h0.9l1.6,4H92.4z M91.2,162.9l-0.7,1.9h1.4L91.2,162.9z"/>
+				</g>
+				<g>
+					<path class="st0" d="M95.8,166.2v-4h1.5c0.8,0,1.2,0.5,1.2,1.2c0,0.6-0.4,1.2-1.2,1.2h-1.2v1.7H95.8z M98.2,163.4
+						c0-0.5-0.3-0.9-0.9-0.9h-1.1v1.7h1.1C97.8,164.3,98.2,163.9,98.2,163.4z"/>
+				</g>
+				<g>
+					<path class="st0" d="M101.5,166.2l-1.1-1.6h-0.9v1.6h-0.3v-4h1.5c0.7,0,1.2,0.4,1.2,1.2c0,0.7-0.5,1.1-1.1,1.1l1.2,1.7H101.5z
+						 M101.6,163.4c0-0.5-0.4-0.9-0.9-0.9h-1.1v1.7h1.1C101.2,164.3,101.6,163.9,101.6,163.4z"/>
+				</g>
+				<g>
+					<path class="st0" d="M102.8,164.2c0-1.2,0.8-2.1,1.9-2.1c1.2,0,1.9,0.9,1.9,2.1c0,1.2-0.8,2.1-1.9,2.1
+						C103.6,166.3,102.8,165.4,102.8,164.2z M106.3,164.2c0-1-0.6-1.7-1.6-1.7c-1,0-1.6,0.7-1.6,1.7c0,1,0.6,1.7,1.6,1.7
+						C105.7,166,106.3,165.2,106.3,164.2z"/>
+				</g>
+				<g>
+					<path class="st0" d="M106.9,165.8l0.2-0.3c0.2,0.2,0.4,0.4,0.8,0.4c0.5,0,0.9-0.4,0.9-0.9v-2.8h0.3v2.8c0,0.8-0.5,1.2-1.2,1.2
+						C107.5,166.3,107.2,166.1,106.9,165.8z"/>
+				</g>
+				<g>
+					<path class="st0" d="M110.4,166.2v-4h2.5v0.3h-2.2v1.5h2.1v0.3h-2.1v1.6h2.2v0.3H110.4z"/>
+				</g>
+				<g>
+					<path class="st0" d="M113.5,164.2c0-1.2,0.9-2.1,2-2.1c0.6,0,1.1,0.3,1.5,0.7l-0.3,0.2c-0.3-0.3-0.7-0.6-1.2-0.6
+						c-0.9,0-1.7,0.7-1.7,1.7c0,1,0.7,1.7,1.7,1.7c0.5,0,0.9-0.2,1.2-0.6l0.3,0.2c-0.4,0.4-0.8,0.7-1.5,0.7
+						C114.4,166.3,113.5,165.5,113.5,164.2z"/>
+				</g>
+				<g>
+					<path class="st0" d="M118.7,166.2v-3.7h-1.3v-0.3h2.9v0.3H119v3.7H118.7z"/>
+				</g>
+			</g>
+			<g>
+				<polygon class="st0" points="26.3,163.8 31.6,158.5 36.9,163.8 37.7,163.8 31.6,157.6 25.5,163.8 				"/>
+				<polygon class="st0" points="36.9,164.7 31.6,170 26.3,164.7 25.5,164.7 31.6,170.8 37.7,164.7 				"/>
+				<polygon class="st0" points="31,163.8 36.3,158.5 41.6,163.8 42.5,163.8 36.3,157.6 30.2,163.8 				"/>
+				<polygon class="st0" points="41.6,164.7 36.3,170 31,164.7 30.2,164.7 36.3,170.8 42.5,164.7 				"/>
+			</g>
+		</g>
+		<g>
+			<path class="st0" d="M33.2,100.7c-4.6,0-8.3,3.7-8.3,8.3s3.7,8.3,8.3,8.3s8.3-3.7,8.3-8.3S37.8,100.7,33.2,100.7z"/>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path class="st0" d="M33.2,35.2c40.7,0,73.8,33.1,73.8,73.8c0,0.7,0,1.4,0,2.1c0,1.7,0.6,3.3,1.7,4.6c1.2,1.2,2.8,1.9,4.5,2
+						l0.2,0c3.5,0,6.3-2.7,6.4-6.2c0-0.8,0-1.7,0-2.5c0-47.7-38.8-86.6-86.6-86.6c-0.8,0-1.7,0-2.5,0c-1.7,0-3.3,0.8-4.5,2
+						c-1.2,1.2-1.8,2.9-1.7,4.6c0.1,3.5,3,6.3,6.6,6.2C31.8,35.2,32.5,35.2,33.2,35.2z"/>
+				</g>
+			</g>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path class="st0" d="M33.2,60.5c26.7,0,48.5,21.7,48.5,48.5c0,0.6,0,1.3,0,2c-0.1,1.7,0.5,3.3,1.7,4.6c1.2,1.3,2.7,2,4.4,2.1
+						c1.7,0.1,3.3-0.5,4.6-1.7c1.2-1.2,2-2.7,2-4.4c0-0.9,0.1-1.8,0.1-2.6c0-33.8-27.5-61.2-61.2-61.2c-0.8,0-1.6,0-2.6,0.1
+						c-1.7,0.1-3.3,0.8-4.4,2.1c-1.2,1.3-1.8,2.9-1.7,4.6s0.8,3.3,2.1,4.4c1.3,1.2,2.9,1.8,4.6,1.7C31.9,60.5,32.6,60.5,33.2,60.5z"
+						/>
+				</g>
+			</g>
+		</g>
+		<g>
+			<g>
+				<g>
+					<path class="st0" d="M33.2,86.7c12.3,0,22.3,10,22.3,22.3c0,0.5,0,1.1-0.1,1.8c-0.3,3.5,2.3,6.6,5.8,6.9
+						c3.5,0.3,6.6-2.3,6.9-5.8c0.1-1,0.1-1.9,0.1-2.8c0-19.3-15.7-35.1-35.1-35.1c-0.9,0-1.8,0-2.8,0.1c-1.7,0.1-3.2,0.9-4.3,2.2
+						c-1.1,1.3-1.6,2.9-1.5,4.6c0.1,1.7,0.9,3.2,2.2,4.3c1.3,1.1,2.9,1.6,4.6,1.5C32.1,86.7,32.7,86.7,33.2,86.7z"/>
+				</g>
+			</g>
+		</g>
+	</g>
+	<g>
+		<path class="st0" d="M35.8,130.4c1.1,0.6,2.1,1.5,2.7,2.6c0.7,1.1,1,2.3,1,3.7s-0.3,2.6-1,3.7c-0.7,1.1-1.6,2-2.7,2.6
+			c-1.1,0.6-2.4,1-3.8,1s-2.7-0.3-3.8-1c-1.1-0.6-2.1-1.5-2.7-2.6c-0.7-1.1-1-2.3-1-3.7c0-1.3,0.3-2.6,1-3.7c0.7-1.1,1.6-2,2.7-2.6
+			c1.1-0.6,2.4-0.9,3.8-0.9C33.4,129.5,34.7,129.8,35.8,130.4z M29.9,132.9c-0.7,0.4-1.2,0.9-1.6,1.6s-0.6,1.4-0.6,2.2
+			c0,0.8,0.2,1.6,0.6,2.3c0.4,0.7,0.9,1.2,1.6,1.6c0.7,0.4,1.4,0.6,2.1,0.6c0.8,0,1.5-0.2,2.1-0.6c0.6-0.4,1.2-0.9,1.5-1.6
+			c0.4-0.7,0.6-1.4,0.6-2.3c0-0.8-0.2-1.6-0.6-2.2s-0.9-1.2-1.5-1.6c-0.6-0.4-1.4-0.6-2.1-0.6C31.3,132.3,30.6,132.5,29.9,132.9z"/>
+		<path class="st0" d="M50.6,133.6c0.8,0.5,1.4,1.1,1.8,2c0.4,0.8,0.6,1.8,0.6,2.9c0,1.1-0.2,2-0.6,2.8c-0.4,0.8-1,1.5-1.8,1.9
+			c-0.8,0.5-1.6,0.7-2.6,0.7c-0.7,0-1.4-0.1-2-0.4s-1.1-0.7-1.5-1.2v5.4h-3.1V133h3.1v1.6c0.4-0.5,0.9-1,1.4-1.2s1.2-0.4,2-0.4
+			C48.9,132.9,49.8,133.1,50.6,133.6z M49.1,140.5c0.5-0.6,0.7-1.3,0.7-2.2c0-0.9-0.2-1.6-0.7-2.1c-0.5-0.6-1.1-0.8-1.9-0.8
+			s-1.4,0.3-1.9,0.8c-0.5,0.6-0.8,1.3-0.8,2.1c0,0.9,0.2,1.6,0.8,2.2s1.1,0.8,1.9,0.8S48.6,141,49.1,140.5z"/>
+		<path class="st0" d="M63.4,134.4c0.9,1,1.4,2.4,1.4,4.2c0,0.3,0,0.6,0,0.7H57c0.2,0.7,0.5,1.2,1,1.6c0.5,0.4,1.1,0.6,1.8,0.6
+			c0.5,0,1-0.1,1.5-0.3s0.9-0.5,1.3-0.9l1.6,1.6c-0.5,0.6-1.2,1.1-2,1.4c-0.8,0.3-1.6,0.5-2.6,0.5c-1.1,0-2.1-0.2-3-0.7
+			s-1.5-1.1-2-1.9c-0.5-0.8-0.7-1.8-0.7-2.9c0-1.1,0.2-2.1,0.7-2.9s1.1-1.5,2-1.9c0.8-0.5,1.8-0.7,2.9-0.7
+			C61.2,132.9,62.5,133.4,63.4,134.4z M61.8,137.5c0-0.7-0.3-1.3-0.7-1.7s-1-0.6-1.7-0.6c-0.7,0-1.2,0.2-1.7,0.6
+			c-0.4,0.4-0.7,1-0.9,1.7H61.8z"/>
+		<path class="st0" d="M76.2,134c0.7,0.7,1.1,1.7,1.1,3v6.8h-3.1v-5.9c0-0.7-0.2-1.2-0.6-1.6s-0.9-0.6-1.5-0.6
+			c-0.8,0-1.4,0.3-1.8,0.8c-0.4,0.5-0.7,1.2-0.7,2v5.3h-3.1V133h3.1v1.9c0.7-1.3,2-2,3.7-2C74.6,132.8,75.5,133.2,76.2,134z"/>
+		<path class="st0" d="M96,129.7h3.3l-4.7,14h-3.3l-2.9-10.1l-3,10.1h-3.2l-4.7-14h3.4l3,10.7l3-10.7H90l3.1,10.7L96,129.7z"/>
+		<path class="st0" d="M103.3,128.7c0.3,0.3,0.5,0.7,0.5,1.2s-0.2,0.9-0.5,1.2c-0.3,0.3-0.7,0.5-1.2,0.5c-0.5,0-0.9-0.2-1.2-0.5
+			c-0.3-0.3-0.5-0.7-0.5-1.2c0-0.5,0.2-0.9,0.5-1.2c0.3-0.3,0.7-0.5,1.2-0.5C102.6,128.2,103,128.3,103.3,128.7z M100.6,133h3.1
+			v10.8h-3.1V133z"/>
+		<path class="st0" d="M106.5,129.7h10.1l0,2.6h-6.9v3.4h6.3v2.6h-6.3v5.3h-3.2V129.7z"/>
+		<path class="st0" d="M120.9,128.7c0.3,0.3,0.5,0.7,0.5,1.2s-0.2,0.9-0.5,1.2c-0.3,0.3-0.7,0.5-1.2,0.5c-0.5,0-0.9-0.2-1.2-0.5
+			c-0.3-0.3-0.5-0.7-0.5-1.2c0-0.5,0.2-0.9,0.5-1.2c0.3-0.3,0.7-0.5,1.2-0.5C120.1,128.2,120.5,128.3,120.9,128.7z M118.1,133h3.1
+			v10.8h-3.1V133z"/>
+	</g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+</svg>

images/OpenWiFi_LogoLockup_Black.svg

@@ -0,0 +1,130 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 24.2.3, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 251.2 114.2" style="enable-background:new 0 0 251.2 114.2;" xml:space="preserve">
+<g>
+	<path d="M219.6,43.3C219.5,43.3,219.5,43.3,219.6,43.3c-1.3,0-2.2-1-2.2-2.2c0-0.2,0-0.4,0-0.6c0-11.9-9.7-21.6-21.6-21.6
+		c-0.2,0-0.4,0-0.6,0c-1.2,0-2.2-0.9-2.2-2.1c0-1.2,0.9-2.2,2.1-2.2c0.2,0,0.5,0,0.7,0c14.3,0,25.9,11.6,25.9,25.9
+		c0,0.2,0,0.5,0,0.7C221.7,42.4,220.7,43.3,219.6,43.3z"/>
+	<path d="M212.1,43.3C212,43.3,212,43.3,212.1,43.3c-1.3-0.1-2.2-1.1-2.2-2.3c0-0.2,0-0.4,0-0.6c0-7.7-6.3-14.1-14.1-14.1
+		c-0.2,0-0.4,0-0.6,0c-1.2,0.1-2.2-0.9-2.3-2.1c0-1.2,0.9-2.2,2.1-2.3c0.3,0,0.5,0,0.8,0c10.2,0,18.4,8.3,18.4,18.4
+		c0,0.2,0,0.5,0,0.8C214.2,42.4,213.2,43.3,212.1,43.3z"/>
+	<path d="M204.3,43.3c-0.1,0-0.1,0-0.2,0c-1.2-0.1-2.1-1.1-2-2.3c0-0.2,0-0.4,0-0.5c0-3.5-2.8-6.3-6.3-6.3c-0.1,0-0.3,0-0.5,0
+		c-1.2,0.1-2.3-0.8-2.3-2c-0.1-1.2,0.8-2.3,2-2.3c0.3,0,0.6,0,0.9,0c5.9,0,10.7,4.8,10.7,10.7c0,0.3,0,0.5,0,0.9
+		C206.4,42.4,205.4,43.3,204.3,43.3z"/>
+	<g>
+		<g>
+			<g>
+				<path d="M61.9,89.9v-4.7h-1.7v-0.9h4.4v0.9h-1.7v4.7H61.9z"/>
+			</g>
+			<g>
+				<path d="M65.6,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8V89h2.9v0.9H65.6z"/>
+			</g>
+			<g>
+				<path d="M70.7,89.9v-5.6h1V89h2.5v0.9H70.7z"/>
+			</g>
+			<g>
+				<path d="M74.9,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8V89h2.9v0.9H74.9z"/>
+			</g>
+			<g>
+				<path d="M79.8,87.1c0-1.7,1.3-2.9,2.9-2.9c1.1,0,1.8,0.6,2.2,1.3l-0.8,0.4c-0.3-0.5-0.8-0.8-1.4-0.8c-1.1,0-1.9,0.8-1.9,2
+					c0,1.2,0.8,2,1.9,2c0.6,0,1.1-0.4,1.4-0.8l0.8,0.4c-0.4,0.7-1.1,1.3-2.2,1.3C81.1,90,79.8,88.8,79.8,87.1z"/>
+			</g>
+			<g>
+				<path d="M85.5,87.1c0-1.7,1.2-2.9,2.9-2.9c1.7,0,2.9,1.2,2.9,2.9S90,90,88.3,90C86.7,90,85.5,88.8,85.5,87.1z M90.2,87.1
+					c0-1.2-0.7-2-1.9-2c-1.1,0-1.9,0.9-1.9,2c0,1.1,0.7,2,1.9,2C89.5,89.1,90.2,88.3,90.2,87.1z"/>
+			</g>
+			<g>
+				<path d="M96.9,89.9v-4.3l-1.7,4.3h-0.4l-1.7-4.3v4.3h-1v-5.6h1.4l1.5,3.8l1.5-3.8h1.4v5.6H96.9z"/>
+			</g>
+			<g>
+				<path d="M103,89.9v-5.6h1v5.6H103z"/>
+			</g>
+			<g>
+				<path d="M109.7,89.9l-2.9-4v4h-1v-5.6h1l2.9,3.9v-3.9h1v5.6H109.7z"/>
+			</g>
+			<g>
+				<path d="M112.4,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8v2.4H112.4z"/>
+			</g>
+			<g>
+				<path d="M120.3,89.9l-1.2-2.1h-1v2.1h-1v-5.6h2.5c1.1,0,1.8,0.7,1.8,1.8c0,1-0.7,1.5-1.3,1.6l1.4,2.2H120.3z M120.4,86.1
+					c0-0.5-0.4-0.9-1-0.9h-1.4V87h1.4C120,87,120.4,86.6,120.4,86.1z"/>
+			</g>
+			<g>
+				<path d="M126.6,89.9l-0.4-1.1h-2.6l-0.4,1.1h-1.1l2.2-5.6h1.2l2.2,5.6H126.6z M124.9,85.3l-1,2.7h2L124.9,85.3z"/>
+			</g>
+			<g>
+				<path d="M131.4,89.9v-5.6h2.1c1.1,0,1.7,0.8,1.7,1.6c0,0.9-0.6,1.6-1.7,1.6h-1.6v2.3H131.4z M134.7,86c0-0.7-0.5-1.2-1.2-1.2
+					h-1.6v2.4h1.6C134.2,87.2,134.7,86.6,134.7,86z"/>
+			</g>
+			<g>
+				<path d="M139.4,89.9l-1.6-2.3h-1.2v2.3h-0.5v-5.6h2.1c1,0,1.7,0.6,1.7,1.6c0,1-0.7,1.6-1.6,1.6l1.6,2.3H139.4z M139.4,86
+					c0-0.7-0.5-1.2-1.2-1.2h-1.6v2.4h1.6C138.9,87.2,139.4,86.7,139.4,86z"/>
+			</g>
+			<g>
+				<path d="M141.2,87.1c0-1.6,1.1-2.9,2.7-2.9c1.6,0,2.7,1.3,2.7,2.9c0,1.6-1.1,2.9-2.7,2.9C142.3,90,141.2,88.8,141.2,87.1z
+					 M146.1,87.1c0-1.4-0.9-2.5-2.2-2.5c-1.4,0-2.2,1-2.2,2.5c0,1.4,0.9,2.5,2.2,2.5C145.2,89.6,146.1,88.5,146.1,87.1z"/>
+			</g>
+			<g>
+				<path d="M147,89.3l0.3-0.4c0.3,0.3,0.6,0.6,1.1,0.6c0.8,0,1.2-0.5,1.2-1.3v-4h0.5v4c0,1.2-0.8,1.7-1.7,1.7
+					C147.9,90,147.4,89.8,147,89.3z"/>
+			</g>
+			<g>
+				<path d="M151.8,89.9v-5.6h3.5v0.4h-3.1v2.1h3v0.4h-3v2.2h3.1v0.4H151.8z"/>
+			</g>
+			<g>
+				<path d="M156.3,87.1c0-1.7,1.3-2.9,2.8-2.9c0.9,0,1.6,0.4,2,1l-0.4,0.3c-0.4-0.5-1-0.8-1.6-0.8c-1.3,0-2.3,1-2.3,2.5
+					c0,1.4,1,2.5,2.3,2.5c0.7,0,1.3-0.3,1.6-0.8l0.4,0.3c-0.5,0.6-1.2,1-2,1C157.5,90,156.3,88.8,156.3,87.1z"/>
+			</g>
+			<g>
+				<path d="M163.5,89.9v-5.2h-1.8v-0.4h4.1v0.4H164v5.2H163.5z"/>
+			</g>
+		</g>
+		<g>
+			<polygon points="33.7,86.5 41.2,79 48.6,86.5 49.8,86.5 41.2,77.9 32.6,86.5 			"/>
+			<polygon points="48.6,87.8 41.2,95.2 33.7,87.8 32.6,87.8 41.2,96.4 49.8,87.8 			"/>
+			<polygon points="40.3,86.5 47.8,79 55.3,86.5 56.4,86.5 47.8,77.9 39.2,86.5 			"/>
+			<polygon points="55.3,87.8 47.8,95.2 40.3,87.8 39.2,87.8 47.8,96.4 56.4,87.8 			"/>
+		</g>
+	</g>
+</g>
+<g>
+	<path d="M51.2,41.3c2,1.1,3.6,2.6,4.7,4.5c1.1,1.9,1.7,4,1.7,6.4c0,2.3-0.6,4.5-1.7,6.4c-1.1,1.9-2.7,3.4-4.7,4.6
+		c-2,1.1-4.2,1.7-6.6,1.7c-2.4,0-4.6-0.6-6.6-1.7c-2-1.1-3.6-2.6-4.7-4.6c-1.1-1.9-1.7-4.1-1.7-6.4c0-2.3,0.6-4.5,1.7-6.4
+		c1.1-1.9,2.7-3.4,4.7-4.5c2-1.1,4.2-1.6,6.6-1.6C47,39.6,49.2,40.2,51.2,41.3z M40.5,44.9c-1.3,0.7-2.3,1.7-3,3
+		c-0.7,1.3-1.1,2.7-1.1,4.2s0.4,3,1.1,4.2c0.8,1.3,1.8,2.3,3,3c1.3,0.7,2.7,1.1,4.1,1.1c1.5,0,2.8-0.4,4.1-1.1c1.3-0.7,2.3-1.8,3-3
+		c0.7-1.3,1.1-2.7,1.1-4.2s-0.4-2.9-1.1-4.2c-0.7-1.3-1.7-2.3-3-3c-1.3-0.7-2.6-1.1-4.1-1.1C43.2,43.8,41.8,44.2,40.5,44.9z"/>
+	<path d="M76.9,46.8c1.3,0.8,2.4,1.9,3.1,3.4c0.7,1.4,1.1,3.1,1.1,5c0,1.9-0.4,3.5-1.1,4.9c-0.7,1.4-1.8,2.5-3.1,3.3
+		c-1.3,0.8-2.9,1.2-4.6,1.2c-1.4,0-2.6-0.3-3.7-0.8c-1.1-0.5-2-1.3-2.7-2.4v9.8h-4.6V45.7H66v3.1c0.7-1.1,1.5-1.8,2.6-2.4
+		c1.1-0.5,2.3-0.8,3.7-0.8C74,45.6,75.6,46,76.9,46.8z M75.1,59.1c1-1.1,1.5-2.4,1.5-4.1c0-1.7-0.5-3-1.5-4.1
+		c-1-1.1-2.2-1.6-3.8-1.6c-1.6,0-2.8,0.5-3.8,1.6c-1,1-1.5,2.4-1.5,4.1c0,1.7,0.5,3,1.5,4.1c1,1.1,2.3,1.6,3.8,1.6
+		C72.8,60.7,74.1,60.2,75.1,59.1z"/>
+	<path d="M99.3,48.1c1.5,1.7,2.3,4.1,2.3,7.2c0,0.6,0,1.1,0,1.4H87.7c0.3,1.3,0.9,2.4,1.9,3.1c0.9,0.8,2.1,1.1,3.5,1.1
+		c1,0,1.9-0.2,2.7-0.5c0.9-0.4,1.6-0.9,2.3-1.6l2.5,2.6c-0.9,1-2.1,1.8-3.4,2.4c-1.3,0.6-2.8,0.8-4.5,0.8c-1.9,0-3.6-0.4-5.1-1.2
+		c-1.5-0.8-2.6-1.9-3.4-3.3c-0.8-1.4-1.2-3.1-1.2-5c0-1.9,0.4-3.5,1.2-5c0.8-1.4,1.9-2.6,3.4-3.4c1.4-0.8,3.1-1.2,4.9-1.2
+		C95.5,45.6,97.8,46.4,99.3,48.1z M97.4,53.6c0-1.4-0.5-2.5-1.4-3.3c-0.9-0.8-2-1.2-3.4-1.2c-1.3,0-2.4,0.4-3.3,1.2
+		c-0.9,0.8-1.5,1.9-1.7,3.3H97.4z"/>
+	<path d="M121.5,47.5c1.2,1.3,1.9,3.1,1.9,5.3v11.7h-4.6V54.1c0-1.3-0.4-2.3-1.1-3.1c-0.7-0.8-1.8-1.1-3-1.1c-1.5,0-2.7,0.5-3.6,1.5
+		s-1.3,2.3-1.3,3.8v9.2h-4.5V45.7h4.5v3.5c1.3-2.4,3.5-3.6,6.7-3.7C118.5,45.5,120.2,46.2,121.5,47.5z"/>
+	<path d="M156.5,39.9h4.9l-8.3,24.5h-4.9l-5.6-18.6l-5.7,18.6h-4.8l-8.3-24.5h5l5.8,19.4l5.7-19.4h4.6l5.8,19.5L156.5,39.9z"/>
+	<path d="M168,38.4c0.5,0.5,0.7,1.2,0.7,2c0,0.8-0.2,1.4-0.7,1.9c-0.5,0.5-1.1,0.8-1.9,0.8c-0.7,0-1.4-0.3-1.9-0.8
+		c-0.5-0.5-0.7-1.2-0.7-1.9c0-0.8,0.2-1.4,0.7-2c0.5-0.5,1.1-0.8,1.9-0.8C166.9,37.7,167.6,37.9,168,38.4z M164,45.7h4.5v18.7H164
+		V45.7z"/>
+	<path d="M174,39.9h16.9l0,4.1h-12.2v6.6h11.1v4.1h-11.1v9.7H174V39.9z"/>
+	<path d="M197.9,38.4c0.5,0.5,0.7,1.2,0.7,2c0,0.8-0.2,1.4-0.7,1.9c-0.5,0.5-1.1,0.8-1.9,0.8c-0.7,0-1.4-0.3-1.9-0.8
+		c-0.5-0.5-0.7-1.2-0.7-1.9c0-0.8,0.2-1.4,0.7-2c0.5-0.5,1.1-0.8,1.9-0.8C196.8,37.7,197.4,37.9,197.9,38.4z M193.8,45.7h4.5v18.7
+		h-4.5V45.7z"/>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+</svg>

images/OpenWiFi_LogoLockup_DarkGreyColour.svg

@@ -0,0 +1,140 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 24.2.3, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 251.2 114.2" style="enable-background:new 0 0 251.2 114.2;" xml:space="preserve">
+<style type="text/css">
+	.st0{fill:#FED206;}
+	.st1{fill:#EB6F53;}
+	.st2{fill:#3BA9B6;}
+	.st3{fill:#414141;}
+</style>
+<g>
+	<path class="st0" d="M219.6,43.3C219.5,43.3,219.5,43.3,219.6,43.3c-1.3,0-2.2-1-2.2-2.2c0-0.2,0-0.4,0-0.6
+		c0-11.9-9.7-21.6-21.6-21.6c-0.2,0-0.4,0-0.6,0c-1.2,0-2.2-0.9-2.2-2.1c0-1.2,0.9-2.2,2.1-2.2c0.2,0,0.5,0,0.7,0
+		c14.3,0,25.9,11.6,25.9,25.9c0,0.2,0,0.5,0,0.7C221.7,42.4,220.7,43.3,219.6,43.3z"/>
+	<path class="st1" d="M212.1,43.3C212,43.3,212,43.3,212.1,43.3c-1.3-0.1-2.2-1.1-2.2-2.3c0-0.2,0-0.4,0-0.6
+		c0-7.7-6.3-14.1-14.1-14.1c-0.2,0-0.4,0-0.6,0c-1.2,0.1-2.2-0.9-2.3-2.1c0-1.2,0.9-2.2,2.1-2.3c0.3,0,0.5,0,0.8,0
+		c10.2,0,18.4,8.3,18.4,18.4c0,0.2,0,0.5,0,0.8C214.2,42.4,213.2,43.3,212.1,43.3z"/>
+	<path class="st2" d="M204.3,43.3c-0.1,0-0.1,0-0.2,0c-1.2-0.1-2.1-1.1-2-2.3c0-0.2,0-0.4,0-0.5c0-3.5-2.8-6.3-6.3-6.3
+		c-0.1,0-0.3,0-0.5,0c-1.2,0.1-2.3-0.8-2.3-2c-0.1-1.2,0.8-2.3,2-2.3c0.3,0,0.6,0,0.9,0c5.9,0,10.7,4.8,10.7,10.7c0,0.3,0,0.5,0,0.9
+		C206.4,42.4,205.4,43.3,204.3,43.3z"/>
+	<g>
+		<g>
+			<g>
+				<path class="st3" d="M61.9,89.9v-4.7h-1.7v-0.9h4.4v0.9h-1.7v4.7H61.9z"/>
+			</g>
+			<g>
+				<path class="st3" d="M65.6,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8V89h2.9v0.9H65.6z"/>
+			</g>
+			<g>
+				<path class="st3" d="M70.7,89.9v-5.6h1V89h2.5v0.9H70.7z"/>
+			</g>
+			<g>
+				<path class="st3" d="M74.9,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8V89h2.9v0.9H74.9z"/>
+			</g>
+			<g>
+				<path class="st3" d="M79.8,87.1c0-1.7,1.3-2.9,2.9-2.9c1.1,0,1.8,0.6,2.2,1.3l-0.8,0.4c-0.3-0.5-0.8-0.8-1.4-0.8
+					c-1.1,0-1.9,0.8-1.9,2c0,1.2,0.8,2,1.9,2c0.6,0,1.1-0.4,1.4-0.8l0.8,0.4c-0.4,0.7-1.1,1.3-2.2,1.3C81.1,90,79.8,88.8,79.8,87.1z
+					"/>
+			</g>
+			<g>
+				<path class="st3" d="M85.5,87.1c0-1.7,1.2-2.9,2.9-2.9c1.7,0,2.9,1.2,2.9,2.9S90,90,88.3,90C86.7,90,85.5,88.8,85.5,87.1z
+					 M90.2,87.1c0-1.2-0.7-2-1.9-2c-1.1,0-1.9,0.9-1.9,2c0,1.1,0.7,2,1.9,2C89.5,89.1,90.2,88.3,90.2,87.1z"/>
+			</g>
+			<g>
+				<path class="st3" d="M96.9,89.9v-4.3l-1.7,4.3h-0.4l-1.7-4.3v4.3h-1v-5.6h1.4l1.5,3.8l1.5-3.8h1.4v5.6H96.9z"/>
+			</g>
+			<g>
+				<path class="st3" d="M103,89.9v-5.6h1v5.6H103z"/>
+			</g>
+			<g>
+				<path class="st3" d="M109.7,89.9l-2.9-4v4h-1v-5.6h1l2.9,3.9v-3.9h1v5.6H109.7z"/>
+			</g>
+			<g>
+				<path class="st3" d="M112.4,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8v2.4H112.4z"/>
+			</g>
+			<g>
+				<path class="st3" d="M120.3,89.9l-1.2-2.1h-1v2.1h-1v-5.6h2.5c1.1,0,1.8,0.7,1.8,1.8c0,1-0.7,1.5-1.3,1.6l1.4,2.2H120.3z
+					 M120.4,86.1c0-0.5-0.4-0.9-1-0.9h-1.4V87h1.4C120,87,120.4,86.6,120.4,86.1z"/>
+			</g>
+			<g>
+				<path class="st3" d="M126.6,89.9l-0.4-1.1h-2.6l-0.4,1.1h-1.1l2.2-5.6h1.2l2.2,5.6H126.6z M124.9,85.3l-1,2.7h2L124.9,85.3z"/>
+			</g>
+			<g>
+				<path class="st3" d="M131.4,89.9v-5.6h2.1c1.1,0,1.7,0.8,1.7,1.6c0,0.9-0.6,1.6-1.7,1.6h-1.6v2.3H131.4z M134.7,86
+					c0-0.7-0.5-1.2-1.2-1.2h-1.6v2.4h1.6C134.2,87.2,134.7,86.6,134.7,86z"/>
+			</g>
+			<g>
+				<path class="st3" d="M139.4,89.9l-1.6-2.3h-1.2v2.3h-0.5v-5.6h2.1c1,0,1.7,0.6,1.7,1.6c0,1-0.7,1.6-1.6,1.6l1.6,2.3H139.4z
+					 M139.4,86c0-0.7-0.5-1.2-1.2-1.2h-1.6v2.4h1.6C138.9,87.2,139.4,86.7,139.4,86z"/>
+			</g>
+			<g>
+				<path class="st3" d="M141.2,87.1c0-1.6,1.1-2.9,2.7-2.9c1.6,0,2.7,1.3,2.7,2.9c0,1.6-1.1,2.9-2.7,2.9
+					C142.3,90,141.2,88.8,141.2,87.1z M146.1,87.1c0-1.4-0.9-2.5-2.2-2.5c-1.4,0-2.2,1-2.2,2.5c0,1.4,0.9,2.5,2.2,2.5
+					C145.2,89.6,146.1,88.5,146.1,87.1z"/>
+			</g>
+			<g>
+				<path class="st3" d="M147,89.3l0.3-0.4c0.3,0.3,0.6,0.6,1.1,0.6c0.8,0,1.2-0.5,1.2-1.3v-4h0.5v4c0,1.2-0.8,1.7-1.7,1.7
+					C147.9,90,147.4,89.8,147,89.3z"/>
+			</g>
+			<g>
+				<path class="st3" d="M151.8,89.9v-5.6h3.5v0.4h-3.1v2.1h3v0.4h-3v2.2h3.1v0.4H151.8z"/>
+			</g>
+			<g>
+				<path class="st3" d="M156.3,87.1c0-1.7,1.3-2.9,2.8-2.9c0.9,0,1.6,0.4,2,1l-0.4,0.3c-0.4-0.5-1-0.8-1.6-0.8
+					c-1.3,0-2.3,1-2.3,2.5c0,1.4,1,2.5,2.3,2.5c0.7,0,1.3-0.3,1.6-0.8l0.4,0.3c-0.5,0.6-1.2,1-2,1C157.5,90,156.3,88.8,156.3,87.1z"
+					/>
+			</g>
+			<g>
+				<path class="st3" d="M163.5,89.9v-5.2h-1.8v-0.4h4.1v0.4H164v5.2H163.5z"/>
+			</g>
+		</g>
+		<g>
+			<polygon class="st3" points="33.7,86.5 41.2,79 48.6,86.5 49.8,86.5 41.2,77.9 32.6,86.5 			"/>
+			<polygon class="st3" points="48.6,87.8 41.2,95.2 33.7,87.8 32.6,87.8 41.2,96.4 49.8,87.8 			"/>
+			<polygon class="st3" points="40.3,86.5 47.8,79 55.3,86.5 56.4,86.5 47.8,77.9 39.2,86.5 			"/>
+			<polygon class="st3" points="55.3,87.8 47.8,95.2 40.3,87.8 39.2,87.8 47.8,96.4 56.4,87.8 			"/>
+		</g>
+	</g>
+</g>
+<g>
+	<path class="st3" d="M51.2,41.3c2,1.1,3.6,2.6,4.7,4.5c1.1,1.9,1.7,4,1.7,6.4c0,2.3-0.6,4.5-1.7,6.4c-1.1,1.9-2.7,3.4-4.7,4.6
+		c-2,1.1-4.2,1.7-6.6,1.7c-2.4,0-4.6-0.6-6.6-1.7c-2-1.1-3.6-2.6-4.7-4.6c-1.1-1.9-1.7-4.1-1.7-6.4c0-2.3,0.6-4.5,1.7-6.4
+		c1.1-1.9,2.7-3.4,4.7-4.5c2-1.1,4.2-1.6,6.6-1.6C47,39.6,49.2,40.2,51.2,41.3z M40.5,44.9c-1.3,0.7-2.3,1.7-3,3
+		c-0.7,1.3-1.1,2.7-1.1,4.2s0.4,3,1.1,4.2c0.8,1.3,1.8,2.3,3,3c1.3,0.7,2.7,1.1,4.1,1.1c1.5,0,2.8-0.4,4.1-1.1c1.3-0.7,2.3-1.8,3-3
+		c0.7-1.3,1.1-2.7,1.1-4.2s-0.4-2.9-1.1-4.2c-0.7-1.3-1.7-2.3-3-3c-1.3-0.7-2.6-1.1-4.1-1.1C43.2,43.8,41.8,44.2,40.5,44.9z"/>
+	<path class="st3" d="M76.9,46.8c1.3,0.8,2.4,1.9,3.1,3.4c0.7,1.4,1.1,3.1,1.1,5c0,1.9-0.4,3.5-1.1,4.9c-0.7,1.4-1.8,2.5-3.1,3.3
+		c-1.3,0.8-2.9,1.2-4.6,1.2c-1.4,0-2.6-0.3-3.7-0.8c-1.1-0.5-2-1.3-2.7-2.4v9.8h-4.6V45.7H66v3.1c0.7-1.1,1.5-1.8,2.6-2.4
+		c1.1-0.5,2.3-0.8,3.7-0.8C74,45.6,75.6,46,76.9,46.8z M75.1,59.1c1-1.1,1.5-2.4,1.5-4.1c0-1.7-0.5-3-1.5-4.1
+		c-1-1.1-2.2-1.6-3.8-1.6c-1.6,0-2.8,0.5-3.8,1.6c-1,1-1.5,2.4-1.5,4.1c0,1.7,0.5,3,1.5,4.1c1,1.1,2.3,1.6,3.8,1.6
+		C72.8,60.7,74.1,60.2,75.1,59.1z"/>
+	<path class="st3" d="M99.3,48.1c1.5,1.7,2.3,4.1,2.3,7.2c0,0.6,0,1.1,0,1.4H87.7c0.3,1.3,0.9,2.4,1.9,3.1c0.9,0.8,2.1,1.1,3.5,1.1
+		c1,0,1.9-0.2,2.7-0.5c0.9-0.4,1.6-0.9,2.3-1.6l2.5,2.6c-0.9,1-2.1,1.8-3.4,2.4c-1.3,0.6-2.8,0.8-4.5,0.8c-1.9,0-3.6-0.4-5.1-1.2
+		c-1.5-0.8-2.6-1.9-3.4-3.3c-0.8-1.4-1.2-3.1-1.2-5c0-1.9,0.4-3.5,1.2-5c0.8-1.4,1.9-2.6,3.4-3.4c1.4-0.8,3.1-1.2,4.9-1.2
+		C95.5,45.6,97.8,46.4,99.3,48.1z M97.4,53.6c0-1.4-0.5-2.5-1.4-3.3c-0.9-0.8-2-1.2-3.4-1.2c-1.3,0-2.4,0.4-3.3,1.2
+		c-0.9,0.8-1.5,1.9-1.7,3.3H97.4z"/>
+	<path class="st3" d="M121.5,47.5c1.2,1.3,1.9,3.1,1.9,5.3v11.7h-4.6V54.1c0-1.3-0.4-2.3-1.1-3.1c-0.7-0.8-1.8-1.1-3-1.1
+		c-1.5,0-2.7,0.5-3.6,1.5s-1.3,2.3-1.3,3.8v9.2h-4.5V45.7h4.5v3.5c1.3-2.4,3.5-3.6,6.7-3.7C118.5,45.5,120.2,46.2,121.5,47.5z"/>
+	<path class="st3" d="M156.5,39.9h4.9l-8.3,24.5h-4.9l-5.6-18.6l-5.7,18.6h-4.8l-8.3-24.5h5l5.8,19.4l5.7-19.4h4.6l5.8,19.5
+		L156.5,39.9z"/>
+	<path class="st3" d="M168,38.4c0.5,0.5,0.7,1.2,0.7,2c0,0.8-0.2,1.4-0.7,1.9c-0.5,0.5-1.1,0.8-1.9,0.8c-0.7,0-1.4-0.3-1.9-0.8
+		c-0.5-0.5-0.7-1.2-0.7-1.9c0-0.8,0.2-1.4,0.7-2c0.5-0.5,1.1-0.8,1.9-0.8C166.9,37.7,167.6,37.9,168,38.4z M164,45.7h4.5v18.7H164
+		V45.7z"/>
+	<path class="st3" d="M174,39.9h16.9l0,4.1h-12.2v6.6h11.1v4.1h-11.1v9.7H174V39.9z"/>
+	<path class="st3" d="M197.9,38.4c0.5,0.5,0.7,1.2,0.7,2c0,0.8-0.2,1.4-0.7,1.9c-0.5,0.5-1.1,0.8-1.9,0.8c-0.7,0-1.4-0.3-1.9-0.8
+		c-0.5-0.5-0.7-1.2-0.7-1.9c0-0.8,0.2-1.4,0.7-2c0.5-0.5,1.1-0.8,1.9-0.8C196.8,37.7,197.4,37.9,197.9,38.4z M193.8,45.7h4.5v18.7
+		h-4.5V45.7z"/>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+</svg>

images/OpenWiFi_LogoLockup_White.svg

@@ -0,0 +1,137 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 24.2.3, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 251.2 114.2" style="enable-background:new 0 0 251.2 114.2;" xml:space="preserve">
+<style type="text/css">
+	.st0{fill:#FFFFFF;}
+</style>
+<g>
+	<path class="st0" d="M219.6,43.3C219.5,43.3,219.5,43.3,219.6,43.3c-1.3,0-2.2-1-2.2-2.2c0-0.2,0-0.4,0-0.6
+		c0-11.9-9.7-21.6-21.6-21.6c-0.2,0-0.4,0-0.6,0c-1.2,0-2.2-0.9-2.2-2.1c0-1.2,0.9-2.2,2.1-2.2c0.2,0,0.5,0,0.7,0
+		c14.3,0,25.9,11.6,25.9,25.9c0,0.2,0,0.5,0,0.7C221.7,42.4,220.7,43.3,219.6,43.3z"/>
+	<path class="st0" d="M212.1,43.3C212,43.3,212,43.3,212.1,43.3c-1.3-0.1-2.2-1.1-2.2-2.3c0-0.2,0-0.4,0-0.6
+		c0-7.7-6.3-14.1-14.1-14.1c-0.2,0-0.4,0-0.6,0c-1.2,0.1-2.2-0.9-2.3-2.1c0-1.2,0.9-2.2,2.1-2.3c0.3,0,0.5,0,0.8,0
+		c10.2,0,18.4,8.3,18.4,18.4c0,0.2,0,0.5,0,0.8C214.2,42.4,213.2,43.3,212.1,43.3z"/>
+	<path class="st0" d="M204.3,43.3c-0.1,0-0.1,0-0.2,0c-1.2-0.1-2.1-1.1-2-2.3c0-0.2,0-0.4,0-0.5c0-3.5-2.8-6.3-6.3-6.3
+		c-0.1,0-0.3,0-0.5,0c-1.2,0.1-2.3-0.8-2.3-2c-0.1-1.2,0.8-2.3,2-2.3c0.3,0,0.6,0,0.9,0c5.9,0,10.7,4.8,10.7,10.7c0,0.3,0,0.5,0,0.9
+		C206.4,42.4,205.4,43.3,204.3,43.3z"/>
+	<g>
+		<g>
+			<g>
+				<path class="st0" d="M61.9,89.9v-4.7h-1.7v-0.9h4.4v0.9h-1.7v4.7H61.9z"/>
+			</g>
+			<g>
+				<path class="st0" d="M65.6,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8V89h2.9v0.9H65.6z"/>
+			</g>
+			<g>
+				<path class="st0" d="M70.7,89.9v-5.6h1V89h2.5v0.9H70.7z"/>
+			</g>
+			<g>
+				<path class="st0" d="M74.9,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8V89h2.9v0.9H74.9z"/>
+			</g>
+			<g>
+				<path class="st0" d="M79.8,87.1c0-1.7,1.3-2.9,2.9-2.9c1.1,0,1.8,0.6,2.2,1.3l-0.8,0.4c-0.3-0.5-0.8-0.8-1.4-0.8
+					c-1.1,0-1.9,0.8-1.9,2c0,1.2,0.8,2,1.9,2c0.6,0,1.1-0.4,1.4-0.8l0.8,0.4c-0.4,0.7-1.1,1.3-2.2,1.3C81.1,90,79.8,88.8,79.8,87.1z
+					"/>
+			</g>
+			<g>
+				<path class="st0" d="M85.5,87.1c0-1.7,1.2-2.9,2.9-2.9c1.7,0,2.9,1.2,2.9,2.9S90,90,88.3,90C86.7,90,85.5,88.8,85.5,87.1z
+					 M90.2,87.1c0-1.2-0.7-2-1.9-2c-1.1,0-1.9,0.9-1.9,2c0,1.1,0.7,2,1.9,2C89.5,89.1,90.2,88.3,90.2,87.1z"/>
+			</g>
+			<g>
+				<path class="st0" d="M96.9,89.9v-4.3l-1.7,4.3h-0.4l-1.7-4.3v4.3h-1v-5.6h1.4l1.5,3.8l1.5-3.8h1.4v5.6H96.9z"/>
+			</g>
+			<g>
+				<path class="st0" d="M103,89.9v-5.6h1v5.6H103z"/>
+			</g>
+			<g>
+				<path class="st0" d="M109.7,89.9l-2.9-4v4h-1v-5.6h1l2.9,3.9v-3.9h1v5.6H109.7z"/>
+			</g>
+			<g>
+				<path class="st0" d="M112.4,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8v2.4H112.4z"/>
+			</g>
+			<g>
+				<path class="st0" d="M120.3,89.9l-1.2-2.1h-1v2.1h-1v-5.6h2.5c1.1,0,1.8,0.7,1.8,1.8c0,1-0.7,1.5-1.3,1.6l1.4,2.2H120.3z
+					 M120.4,86.1c0-0.5-0.4-0.9-1-0.9h-1.4V87h1.4C120,87,120.4,86.6,120.4,86.1z"/>
+			</g>
+			<g>
+				<path class="st0" d="M126.6,89.9l-0.4-1.1h-2.6l-0.4,1.1h-1.1l2.2-5.6h1.2l2.2,5.6H126.6z M124.9,85.3l-1,2.7h2L124.9,85.3z"/>
+			</g>
+			<g>
+				<path class="st0" d="M131.4,89.9v-5.6h2.1c1.1,0,1.7,0.8,1.7,1.6c0,0.9-0.6,1.6-1.7,1.6h-1.6v2.3H131.4z M134.7,86
+					c0-0.7-0.5-1.2-1.2-1.2h-1.6v2.4h1.6C134.2,87.2,134.7,86.6,134.7,86z"/>
+			</g>
+			<g>
+				<path class="st0" d="M139.4,89.9l-1.6-2.3h-1.2v2.3h-0.5v-5.6h2.1c1,0,1.7,0.6,1.7,1.6c0,1-0.7,1.6-1.6,1.6l1.6,2.3H139.4z
+					 M139.4,86c0-0.7-0.5-1.2-1.2-1.2h-1.6v2.4h1.6C138.9,87.2,139.4,86.7,139.4,86z"/>
+			</g>
+			<g>
+				<path class="st0" d="M141.2,87.1c0-1.6,1.1-2.9,2.7-2.9c1.6,0,2.7,1.3,2.7,2.9c0,1.6-1.1,2.9-2.7,2.9
+					C142.3,90,141.2,88.8,141.2,87.1z M146.1,87.1c0-1.4-0.9-2.5-2.2-2.5c-1.4,0-2.2,1-2.2,2.5c0,1.4,0.9,2.5,2.2,2.5
+					C145.2,89.6,146.1,88.5,146.1,87.1z"/>
+			</g>
+			<g>
+				<path class="st0" d="M147,89.3l0.3-0.4c0.3,0.3,0.6,0.6,1.1,0.6c0.8,0,1.2-0.5,1.2-1.3v-4h0.5v4c0,1.2-0.8,1.7-1.7,1.7
+					C147.9,90,147.4,89.8,147,89.3z"/>
+			</g>
+			<g>
+				<path class="st0" d="M151.8,89.9v-5.6h3.5v0.4h-3.1v2.1h3v0.4h-3v2.2h3.1v0.4H151.8z"/>
+			</g>
+			<g>
+				<path class="st0" d="M156.3,87.1c0-1.7,1.3-2.9,2.8-2.9c0.9,0,1.6,0.4,2,1l-0.4,0.3c-0.4-0.5-1-0.8-1.6-0.8
+					c-1.3,0-2.3,1-2.3,2.5c0,1.4,1,2.5,2.3,2.5c0.7,0,1.3-0.3,1.6-0.8l0.4,0.3c-0.5,0.6-1.2,1-2,1C157.5,90,156.3,88.8,156.3,87.1z"
+					/>
+			</g>
+			<g>
+				<path class="st0" d="M163.5,89.9v-5.2h-1.8v-0.4h4.1v0.4H164v5.2H163.5z"/>
+			</g>
+		</g>
+		<g>
+			<polygon class="st0" points="33.7,86.5 41.2,79 48.6,86.5 49.8,86.5 41.2,77.9 32.6,86.5 			"/>
+			<polygon class="st0" points="48.6,87.8 41.2,95.2 33.7,87.8 32.6,87.8 41.2,96.4 49.8,87.8 			"/>
+			<polygon class="st0" points="40.3,86.5 47.8,79 55.3,86.5 56.4,86.5 47.8,77.9 39.2,86.5 			"/>
+			<polygon class="st0" points="55.3,87.8 47.8,95.2 40.3,87.8 39.2,87.8 47.8,96.4 56.4,87.8 			"/>
+		</g>
+	</g>
+</g>
+<g>
+	<path class="st0" d="M51.2,41.3c2,1.1,3.6,2.6,4.7,4.5c1.1,1.9,1.7,4,1.7,6.4c0,2.3-0.6,4.5-1.7,6.4c-1.1,1.9-2.7,3.4-4.7,4.6
+		c-2,1.1-4.2,1.7-6.6,1.7c-2.4,0-4.6-0.6-6.6-1.7c-2-1.1-3.6-2.6-4.7-4.6c-1.1-1.9-1.7-4.1-1.7-6.4c0-2.3,0.6-4.5,1.7-6.4
+		c1.1-1.9,2.7-3.4,4.7-4.5c2-1.1,4.2-1.6,6.6-1.6C47,39.6,49.2,40.2,51.2,41.3z M40.5,44.9c-1.3,0.7-2.3,1.7-3,3
+		c-0.7,1.3-1.1,2.7-1.1,4.2s0.4,3,1.1,4.2c0.8,1.3,1.8,2.3,3,3c1.3,0.7,2.7,1.1,4.1,1.1c1.5,0,2.8-0.4,4.1-1.1c1.3-0.7,2.3-1.8,3-3
+		c0.7-1.3,1.1-2.7,1.1-4.2s-0.4-2.9-1.1-4.2c-0.7-1.3-1.7-2.3-3-3c-1.3-0.7-2.6-1.1-4.1-1.1C43.2,43.8,41.8,44.2,40.5,44.9z"/>
+	<path class="st0" d="M76.9,46.8c1.3,0.8,2.4,1.9,3.1,3.4c0.7,1.4,1.1,3.1,1.1,5c0,1.9-0.4,3.5-1.1,4.9c-0.7,1.4-1.8,2.5-3.1,3.3
+		c-1.3,0.8-2.9,1.2-4.6,1.2c-1.4,0-2.6-0.3-3.7-0.8c-1.1-0.5-2-1.3-2.7-2.4v9.8h-4.6V45.7H66v3.1c0.7-1.1,1.5-1.8,2.6-2.4
+		c1.1-0.5,2.3-0.8,3.7-0.8C74,45.6,75.6,46,76.9,46.8z M75.1,59.1c1-1.1,1.5-2.4,1.5-4.1c0-1.7-0.5-3-1.5-4.1
+		c-1-1.1-2.2-1.6-3.8-1.6c-1.6,0-2.8,0.5-3.8,1.6c-1,1-1.5,2.4-1.5,4.1c0,1.7,0.5,3,1.5,4.1c1,1.1,2.3,1.6,3.8,1.6
+		C72.8,60.7,74.1,60.2,75.1,59.1z"/>
+	<path class="st0" d="M99.3,48.1c1.5,1.7,2.3,4.1,2.3,7.2c0,0.6,0,1.1,0,1.4H87.7c0.3,1.3,0.9,2.4,1.9,3.1c0.9,0.8,2.1,1.1,3.5,1.1
+		c1,0,1.9-0.2,2.7-0.5c0.9-0.4,1.6-0.9,2.3-1.6l2.5,2.6c-0.9,1-2.1,1.8-3.4,2.4c-1.3,0.6-2.8,0.8-4.5,0.8c-1.9,0-3.6-0.4-5.1-1.2
+		c-1.5-0.8-2.6-1.9-3.4-3.3c-0.8-1.4-1.2-3.1-1.2-5c0-1.9,0.4-3.5,1.2-5c0.8-1.4,1.9-2.6,3.4-3.4c1.4-0.8,3.1-1.2,4.9-1.2
+		C95.5,45.6,97.8,46.4,99.3,48.1z M97.4,53.6c0-1.4-0.5-2.5-1.4-3.3c-0.9-0.8-2-1.2-3.4-1.2c-1.3,0-2.4,0.4-3.3,1.2
+		c-0.9,0.8-1.5,1.9-1.7,3.3H97.4z"/>
+	<path class="st0" d="M121.5,47.5c1.2,1.3,1.9,3.1,1.9,5.3v11.7h-4.6V54.1c0-1.3-0.4-2.3-1.1-3.1c-0.7-0.8-1.8-1.1-3-1.1
+		c-1.5,0-2.7,0.5-3.6,1.5s-1.3,2.3-1.3,3.8v9.2h-4.5V45.7h4.5v3.5c1.3-2.4,3.5-3.6,6.7-3.7C118.5,45.5,120.2,46.2,121.5,47.5z"/>
+	<path class="st0" d="M156.5,39.9h4.9l-8.3,24.5h-4.9l-5.6-18.6l-5.7,18.6h-4.8l-8.3-24.5h5l5.8,19.4l5.7-19.4h4.6l5.8,19.5
+		L156.5,39.9z"/>
+	<path class="st0" d="M168,38.4c0.5,0.5,0.7,1.2,0.7,2c0,0.8-0.2,1.4-0.7,1.9c-0.5,0.5-1.1,0.8-1.9,0.8c-0.7,0-1.4-0.3-1.9-0.8
+		c-0.5-0.5-0.7-1.2-0.7-1.9c0-0.8,0.2-1.4,0.7-2c0.5-0.5,1.1-0.8,1.9-0.8C166.9,37.7,167.6,37.9,168,38.4z M164,45.7h4.5v18.7H164
+		V45.7z"/>
+	<path class="st0" d="M174,39.9h16.9l0,4.1h-12.2v6.6h11.1v4.1h-11.1v9.7H174V39.9z"/>
+	<path class="st0" d="M197.9,38.4c0.5,0.5,0.7,1.2,0.7,2c0,0.8-0.2,1.4-0.7,1.9c-0.5,0.5-1.1,0.8-1.9,0.8c-0.7,0-1.4-0.3-1.9-0.8
+		c-0.5-0.5-0.7-1.2-0.7-1.9c0-0.8,0.2-1.4,0.7-2c0.5-0.5,1.1-0.8,1.9-0.8C196.8,37.7,197.4,37.9,197.9,38.4z M193.8,45.7h4.5v18.7
+		h-4.5V45.7z"/>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+</svg>

images/OpenWiFi_LogoLockup_WhiteColour.svg

@@ -0,0 +1,140 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 24.2.3, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 251.2 114.2" style="enable-background:new 0 0 251.2 114.2;" xml:space="preserve">
+<style type="text/css">
+	.st0{fill:#FED206;}
+	.st1{fill:#EB6F53;}
+	.st2{fill:#3BA9B6;}
+	.st3{fill:#FFFFFF;}
+</style>
+<g>
+	<path class="st0" d="M219.6,43.3C219.5,43.3,219.5,43.3,219.6,43.3c-1.3,0-2.2-1-2.2-2.2c0-0.2,0-0.4,0-0.6
+		c0-11.9-9.7-21.6-21.6-21.6c-0.2,0-0.4,0-0.6,0c-1.2,0-2.2-0.9-2.2-2.1c0-1.2,0.9-2.2,2.1-2.2c0.2,0,0.5,0,0.7,0
+		c14.3,0,25.9,11.6,25.9,25.9c0,0.2,0,0.5,0,0.7C221.7,42.4,220.7,43.3,219.6,43.3z"/>
+	<path class="st1" d="M212.1,43.3C212,43.3,212,43.3,212.1,43.3c-1.3-0.1-2.2-1.1-2.2-2.3c0-0.2,0-0.4,0-0.6
+		c0-7.7-6.3-14.1-14.1-14.1c-0.2,0-0.4,0-0.6,0c-1.2,0.1-2.2-0.9-2.3-2.1c0-1.2,0.9-2.2,2.1-2.3c0.3,0,0.5,0,0.8,0
+		c10.2,0,18.4,8.3,18.4,18.4c0,0.2,0,0.5,0,0.8C214.2,42.4,213.2,43.3,212.1,43.3z"/>
+	<path class="st2" d="M204.3,43.3c-0.1,0-0.1,0-0.2,0c-1.2-0.1-2.1-1.1-2-2.3c0-0.2,0-0.4,0-0.5c0-3.5-2.8-6.3-6.3-6.3
+		c-0.1,0-0.3,0-0.5,0c-1.2,0.1-2.3-0.8-2.3-2c-0.1-1.2,0.8-2.3,2-2.3c0.3,0,0.6,0,0.9,0c5.9,0,10.7,4.8,10.7,10.7c0,0.3,0,0.5,0,0.9
+		C206.4,42.4,205.4,43.3,204.3,43.3z"/>
+	<g>
+		<g>
+			<g>
+				<path class="st3" d="M61.9,89.9v-4.7h-1.7v-0.9h4.4v0.9h-1.7v4.7H61.9z"/>
+			</g>
+			<g>
+				<path class="st3" d="M65.6,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8V89h2.9v0.9H65.6z"/>
+			</g>
+			<g>
+				<path class="st3" d="M70.7,89.9v-5.6h1V89h2.5v0.9H70.7z"/>
+			</g>
+			<g>
+				<path class="st3" d="M74.9,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8V89h2.9v0.9H74.9z"/>
+			</g>
+			<g>
+				<path class="st3" d="M79.8,87.1c0-1.7,1.3-2.9,2.9-2.9c1.1,0,1.8,0.6,2.2,1.3l-0.8,0.4c-0.3-0.5-0.8-0.8-1.4-0.8
+					c-1.1,0-1.9,0.8-1.9,2c0,1.2,0.8,2,1.9,2c0.6,0,1.1-0.4,1.4-0.8l0.8,0.4c-0.4,0.7-1.1,1.3-2.2,1.3C81.1,90,79.8,88.8,79.8,87.1z
+					"/>
+			</g>
+			<g>
+				<path class="st3" d="M85.5,87.1c0-1.7,1.2-2.9,2.9-2.9c1.7,0,2.9,1.2,2.9,2.9S90,90,88.3,90C86.7,90,85.5,88.8,85.5,87.1z
+					 M90.2,87.1c0-1.2-0.7-2-1.9-2c-1.1,0-1.9,0.9-1.9,2c0,1.1,0.7,2,1.9,2C89.5,89.1,90.2,88.3,90.2,87.1z"/>
+			</g>
+			<g>
+				<path class="st3" d="M96.9,89.9v-4.3l-1.7,4.3h-0.4l-1.7-4.3v4.3h-1v-5.6h1.4l1.5,3.8l1.5-3.8h1.4v5.6H96.9z"/>
+			</g>
+			<g>
+				<path class="st3" d="M103,89.9v-5.6h1v5.6H103z"/>
+			</g>
+			<g>
+				<path class="st3" d="M109.7,89.9l-2.9-4v4h-1v-5.6h1l2.9,3.9v-3.9h1v5.6H109.7z"/>
+			</g>
+			<g>
+				<path class="st3" d="M112.4,89.9v-5.6h3.8v0.9h-2.9v1.4h2.8v0.9h-2.8v2.4H112.4z"/>
+			</g>
+			<g>
+				<path class="st3" d="M120.3,89.9l-1.2-2.1h-1v2.1h-1v-5.6h2.5c1.1,0,1.8,0.7,1.8,1.8c0,1-0.7,1.5-1.3,1.6l1.4,2.2H120.3z
+					 M120.4,86.1c0-0.5-0.4-0.9-1-0.9h-1.4V87h1.4C120,87,120.4,86.6,120.4,86.1z"/>
+			</g>
+			<g>
+				<path class="st3" d="M126.6,89.9l-0.4-1.1h-2.6l-0.4,1.1h-1.1l2.2-5.6h1.2l2.2,5.6H126.6z M124.9,85.3l-1,2.7h2L124.9,85.3z"/>
+			</g>
+			<g>
+				<path class="st3" d="M131.4,89.9v-5.6h2.1c1.1,0,1.7,0.8,1.7,1.6c0,0.9-0.6,1.6-1.7,1.6h-1.6v2.3H131.4z M134.7,86
+					c0-0.7-0.5-1.2-1.2-1.2h-1.6v2.4h1.6C134.2,87.2,134.7,86.6,134.7,86z"/>
+			</g>
+			<g>
+				<path class="st3" d="M139.4,89.9l-1.6-2.3h-1.2v2.3h-0.5v-5.6h2.1c1,0,1.7,0.6,1.7,1.6c0,1-0.7,1.6-1.6,1.6l1.6,2.3H139.4z
+					 M139.4,86c0-0.7-0.5-1.2-1.2-1.2h-1.6v2.4h1.6C138.9,87.2,139.4,86.7,139.4,86z"/>
+			</g>
+			<g>
+				<path class="st3" d="M141.2,87.1c0-1.6,1.1-2.9,2.7-2.9c1.6,0,2.7,1.3,2.7,2.9c0,1.6-1.1,2.9-2.7,2.9
+					C142.3,90,141.2,88.8,141.2,87.1z M146.1,87.1c0-1.4-0.9-2.5-2.2-2.5c-1.4,0-2.2,1-2.2,2.5c0,1.4,0.9,2.5,2.2,2.5
+					C145.2,89.6,146.1,88.5,146.1,87.1z"/>
+			</g>
+			<g>
+				<path class="st3" d="M147,89.3l0.3-0.4c0.3,0.3,0.6,0.6,1.1,0.6c0.8,0,1.2-0.5,1.2-1.3v-4h0.5v4c0,1.2-0.8,1.7-1.7,1.7
+					C147.9,90,147.4,89.8,147,89.3z"/>
+			</g>
+			<g>
+				<path class="st3" d="M151.8,89.9v-5.6h3.5v0.4h-3.1v2.1h3v0.4h-3v2.2h3.1v0.4H151.8z"/>
+			</g>
+			<g>
+				<path class="st3" d="M156.3,87.1c0-1.7,1.3-2.9,2.8-2.9c0.9,0,1.6,0.4,2,1l-0.4,0.3c-0.4-0.5-1-0.8-1.6-0.8
+					c-1.3,0-2.3,1-2.3,2.5c0,1.4,1,2.5,2.3,2.5c0.7,0,1.3-0.3,1.6-0.8l0.4,0.3c-0.5,0.6-1.2,1-2,1C157.5,90,156.3,88.8,156.3,87.1z"
+					/>
+			</g>
+			<g>
+				<path class="st3" d="M163.5,89.9v-5.2h-1.8v-0.4h4.1v0.4H164v5.2H163.5z"/>
+			</g>
+		</g>
+		<g>
+			<polygon class="st3" points="33.7,86.5 41.2,79 48.6,86.5 49.8,86.5 41.2,77.9 32.6,86.5 			"/>
+			<polygon class="st3" points="48.6,87.8 41.2,95.2 33.7,87.8 32.6,87.8 41.2,96.4 49.8,87.8 			"/>
+			<polygon class="st3" points="40.3,86.5 47.8,79 55.3,86.5 56.4,86.5 47.8,77.9 39.2,86.5 			"/>
+			<polygon class="st3" points="55.3,87.8 47.8,95.2 40.3,87.8 39.2,87.8 47.8,96.4 56.4,87.8 			"/>
+		</g>
+	</g>
+</g>
+<g>
+	<path class="st3" d="M51.2,41.3c2,1.1,3.6,2.6,4.7,4.5c1.1,1.9,1.7,4,1.7,6.4c0,2.3-0.6,4.5-1.7,6.4c-1.1,1.9-2.7,3.4-4.7,4.6
+		c-2,1.1-4.2,1.7-6.6,1.7c-2.4,0-4.6-0.6-6.6-1.7c-2-1.1-3.6-2.6-4.7-4.6c-1.1-1.9-1.7-4.1-1.7-6.4c0-2.3,0.6-4.5,1.7-6.4
+		c1.1-1.9,2.7-3.4,4.7-4.5c2-1.1,4.2-1.6,6.6-1.6C47,39.6,49.2,40.2,51.2,41.3z M40.5,44.9c-1.3,0.7-2.3,1.7-3,3
+		c-0.7,1.3-1.1,2.7-1.1,4.2s0.4,3,1.1,4.2c0.8,1.3,1.8,2.3,3,3c1.3,0.7,2.7,1.1,4.1,1.1c1.5,0,2.8-0.4,4.1-1.1c1.3-0.7,2.3-1.8,3-3
+		c0.7-1.3,1.1-2.7,1.1-4.2s-0.4-2.9-1.1-4.2c-0.7-1.3-1.7-2.3-3-3c-1.3-0.7-2.6-1.1-4.1-1.1C43.2,43.8,41.8,44.2,40.5,44.9z"/>
+	<path class="st3" d="M76.9,46.8c1.3,0.8,2.4,1.9,3.1,3.4c0.7,1.4,1.1,3.1,1.1,5c0,1.9-0.4,3.5-1.1,4.9c-0.7,1.4-1.8,2.5-3.1,3.3
+		c-1.3,0.8-2.9,1.2-4.6,1.2c-1.4,0-2.6-0.3-3.7-0.8c-1.1-0.5-2-1.3-2.7-2.4v9.8h-4.6V45.7H66v3.1c0.7-1.1,1.5-1.8,2.6-2.4
+		c1.1-0.5,2.3-0.8,3.7-0.8C74,45.6,75.6,46,76.9,46.8z M75.1,59.1c1-1.1,1.5-2.4,1.5-4.1c0-1.7-0.5-3-1.5-4.1
+		c-1-1.1-2.2-1.6-3.8-1.6c-1.6,0-2.8,0.5-3.8,1.6c-1,1-1.5,2.4-1.5,4.1c0,1.7,0.5,3,1.5,4.1c1,1.1,2.3,1.6,3.8,1.6
+		C72.8,60.7,74.1,60.2,75.1,59.1z"/>
+	<path class="st3" d="M99.3,48.1c1.5,1.7,2.3,4.1,2.3,7.2c0,0.6,0,1.1,0,1.4H87.7c0.3,1.3,0.9,2.4,1.9,3.1c0.9,0.8,2.1,1.1,3.5,1.1
+		c1,0,1.9-0.2,2.7-0.5c0.9-0.4,1.6-0.9,2.3-1.6l2.5,2.6c-0.9,1-2.1,1.8-3.4,2.4c-1.3,0.6-2.8,0.8-4.5,0.8c-1.9,0-3.6-0.4-5.1-1.2
+		c-1.5-0.8-2.6-1.9-3.4-3.3c-0.8-1.4-1.2-3.1-1.2-5c0-1.9,0.4-3.5,1.2-5c0.8-1.4,1.9-2.6,3.4-3.4c1.4-0.8,3.1-1.2,4.9-1.2
+		C95.5,45.6,97.8,46.4,99.3,48.1z M97.4,53.6c0-1.4-0.5-2.5-1.4-3.3c-0.9-0.8-2-1.2-3.4-1.2c-1.3,0-2.4,0.4-3.3,1.2
+		c-0.9,0.8-1.5,1.9-1.7,3.3H97.4z"/>
+	<path class="st3" d="M121.5,47.5c1.2,1.3,1.9,3.1,1.9,5.3v11.7h-4.6V54.1c0-1.3-0.4-2.3-1.1-3.1c-0.7-0.8-1.8-1.1-3-1.1
+		c-1.5,0-2.7,0.5-3.6,1.5s-1.3,2.3-1.3,3.8v9.2h-4.5V45.7h4.5v3.5c1.3-2.4,3.5-3.6,6.7-3.7C118.5,45.5,120.2,46.2,121.5,47.5z"/>
+	<path class="st3" d="M156.5,39.9h4.9l-8.3,24.5h-4.9l-5.6-18.6l-5.7,18.6h-4.8l-8.3-24.5h5l5.8,19.4l5.7-19.4h4.6l5.8,19.5
+		L156.5,39.9z"/>
+	<path class="st3" d="M168,38.4c0.5,0.5,0.7,1.2,0.7,2c0,0.8-0.2,1.4-0.7,1.9c-0.5,0.5-1.1,0.8-1.9,0.8c-0.7,0-1.4-0.3-1.9-0.8
+		c-0.5-0.5-0.7-1.2-0.7-1.9c0-0.8,0.2-1.4,0.7-2c0.5-0.5,1.1-0.8,1.9-0.8C166.9,37.7,167.6,37.9,168,38.4z M164,45.7h4.5v18.7H164
+		V45.7z"/>
+	<path class="st3" d="M174,39.9h16.9l0,4.1h-12.2v6.6h11.1v4.1h-11.1v9.7H174V39.9z"/>
+	<path class="st3" d="M197.9,38.4c0.5,0.5,0.7,1.2,0.7,2c0,0.8-0.2,1.4-0.7,1.9c-0.5,0.5-1.1,0.8-1.9,0.8c-0.7,0-1.4-0.3-1.9-0.8
+		c-0.5-0.5-0.7-1.2-0.7-1.9c0-0.8,0.2-1.4,0.7-2c0.5-0.5,1.1-0.8,1.9-0.8C196.8,37.7,197.4,37.9,197.9,38.4z M193.8,45.7h4.5v18.7
+		h-4.5V45.7z"/>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+<g>
+</g>
+</svg>