scottk/wlan-lanforge-scripts
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-lanforge-scripts.git synced 2025-10-30 18:27:53 +00:00
Code Issues Packages Projects Releases Wiki Activity

Update wlanpro test.

Browse Source 
Better port stats parsing, better help.
Decrease requested rate for 2x2 and 1x1 since they are expected
to run slower.
This commit is contained in:
Ben Greear
2018-08-07 11:59:19 -07:00
parent fca3618daf
commit 08c9b54e76
1 changed files with 49 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

62
wlanpro_test.pl
View File

@@ -38,7 +38,7 @@ my $radio_4a = "wiphy2";
my $radio_4b = "wiphy3";
my $sta_max = 40; # For upload/download tests
my $wct_sta_max = 64; # For wifi-capacity-test on single radio (4a)
my $gui_host = "127.0.0.1";
my $gui_host = "127.0.0.1"; # auto-wifi-cap script will not work properly if not run on same machine as GUI
my $gui_port = 7777;
my $resource = 2;
my $speed_dl_tot = 1000000000;
@@ -73,13 +73,26 @@ my $usage = "$0
[--speed_dl_tot {speed-bps}]
[--security {open | wpa2}]
[--manager {manager-machine IP or hostname}]
[--testcase {test-case: -1 all, 0 setup, 1-5, 100 means cleanup}]
[--testcase {test-case: -1: all except cleanup, 0: setup, 1: 3x3 ul/dl,
2: 2x2 ul/dl 3: 1x1 ul/dl, 4: mix ul/dl, 5: mix ul/dl + interference,
6: wifi-capacity-test, 100: cleanup}]
[--log_name {log-file-name}]
[--rest_time {seconds to sleep between rest runs, dfault is $rest_time}]
[--gui_host {LANforge gui_host (127.0.0.1)}]
[--gui_port {LANforge gui_port (7777)}]
[--gui_host {LANforge gui_host (127.0.0.1): Must be same as where this script runs.}]
[--gui_port {LANforge gui_port (7777): Start your GUI with -cli-port 7777}]
NOTE: The total speed will be multiplied by 1.0 for 3x3 and mixed tests, 0.75 for 2x2 testing,
and 0.5 for 1x1 testing. This should still attempt near theoretical throughput without
over-driving the DUT too badly.
";
my $usage_notes = "
Errors reported by the LANforge-GUI that you should be able to ignore:
* ERROR: Cannot change MAC address with the 'add-vwifi' command.
Reason: Existing MAC would be fine anyway.
";
GetOptions (
'pld_size=i' => \$pld_size,
@@ -125,6 +138,11 @@ my @stations = ();
my @stations4a = ();
my $sta_on_4a = 0;
$SIG{'INT'} = sub {
print "Caught ctrl-C, existing!\n";
exit 1;
};
open(LOGF, ">$log_name") or die("Could not open log file: $log_name $!\n");
logp($log_prefix);
@@ -242,7 +260,7 @@ stop_all_cx();
if ($testcase == -1 || $testcase == 1) {
wait_for_stations();
do_test_series("3x3 station upload/download test");
do_test_series("3x3 station upload/download test", 1.0);
}
if ($testcase == -1 || $testcase == 2) {
@@ -257,7 +275,7 @@ if ($testcase == -1 || $testcase == 2) {
wait_for_stations();
check_more_rest($testcase, $start);
do_test_series("2x2 station upload/download test");
do_test_series("2x2 station upload/download test", 0.75);
}
if ($testcase == -1 || $testcase == 3) {
@@ -272,7 +290,7 @@ if ($testcase == -1 || $testcase == 3) {
wait_for_stations();
check_more_rest($testcase, $start);
do_test_series("1x1 station upload/download test");
do_test_series("1x1 station upload/download test", 0.50);
}
@@ -307,7 +325,7 @@ if ($testcase == -1 || $testcase == 4 || $testcase == 5) {
check_more_rest($testcase, $start);
if ($testcase == -1 || $testcase == 4) {
do_test_series("Mixed mode: 10 3x3, 15 2x2, 10 1x1 station upload/download test");
do_test_series("Mixed mode: 10 3x3, 15 2x2, 10 1x1 station upload/download test", 1.0);
if ($testcase == -1) {
sleep($rest_time);
}
@@ -317,7 +335,7 @@ if ($testcase == -1 || $testcase == 4 || $testcase == 5) {
# Disable this from 'all' runs for now until we figure out how the interference is going to be generated.
if ($testcase == 5) {
wait_for_stations();
do_test_series("Mixed mode: 10 3x3, 15 2x2, 10 1x1 station upload/download test with interference");
do_test_series("Mixed mode: 10 3x3, 15 2x2, 10 1x1 station upload/download test with interference", 1.0);
}
# WiFi capacity test
@@ -608,7 +626,7 @@ sub do_one_test {
}
# WiFi stuff should come from the Probed section
if ($port_text =~ /.*Probed:\s+(.*)/) {
if ($port_text =~ /.*Probed:\s+(.*)/s) {
my $haystack = $1;
# We want: Mode,NSS,Bandwidth,Channel,AP,RX-Rate,Signal,Link-Activity
@@ -622,6 +640,22 @@ sub do_one_test {
$port_signal{$pkey} = $7;
$port_activity{$pkey} = $8;
}
# Deal with no AP or Signal field reported.
elsif ($haystack =~ /.*Mode:\s+(\S+).* NSS:\s+(\S+).*Bandwidth: (\S+).*Channel:\s+(\S+).*RX-Rate: (\S+).*Link-Activity: (\S+).*/s) {
$port_mode{$pkey} = $1;
$port_nss{$pkey} = $2;
$port_bandwidth{$pkey} = $3;
$port_channel{$pkey} = $4;
$port_rx_rate_link{$pkey} = $5;
$port_signal{$pkey} = $6;
$port_activity{$pkey} = $7;
$port_ap{$pkey} = "NA";
$port_signal{$pkey} = "-1";
}
else {
print "Did not find probed wifi data, raw-text:\n$haystack\nFull port output:\n$port_text";
exit 1;
}
}
}
@@ -864,19 +898,21 @@ sub logpb {
sub do_test_series {
my $desc = shift;
my $speed_mult = shift;
my $msg = "\n" . `date` . "Doing test series: $desc\n";
logpb($msg);
$mini_summary_text .= $msg;
# First test case, 20 stations downloading, 3x3 mode.
logpb("\nDoing download test with 20 stations.\n");
do_one_test(0, $speed_dl_tot / 20, 20, $one_way_test_time, $desc);
do_one_test(0, ($speed_dl_tot * $speed_mult) / 20, 20, $one_way_test_time, $desc);
# Upload 30 sec
logpb("\nDoing upload test with 20 stations.\n");
do_one_test($speed_ul_tot / 20, 0, 20, $one_way_test_time, $desc);
do_one_test(($speed_ul_tot * $speed_mult) / 20, 0, 20, $one_way_test_time, $desc);
# Upload/Download 1 minute sec
logpb("\nDoing upload/download test with 40 stations.\n");
do_one_test($speed_ul_tot / 40, $speed_dl_tot / 40, 40, $bi_test_time, $desc);
do_one_test(($speed_ul_tot * $speed_mult) / 40, ($speed_dl_tot * $speed_mult) / 40, 40, $bi_test_time, $desc);
}
sub do_cmd {