diff --git a/py-scripts/regression_test.sh b/py-scripts/regression_test.sh
index 724e44aa..aee4336d 100755
--- a/py-scripts/regression_test.sh
+++ b/py-scripts/regression_test.sh
@@ -5,10 +5,16 @@
 #Variables
 NUM_STA=4
 FILESIZE1=$(echo ${#1})
+FILESIZE2=$(echo ${#2})
 if (( $FILESIZE1 > 0 )); then
-  SSID_USED=$1
-  PASSWD_USED=$2
-  SECURITY=$3
+  if (( $FILESIZE2 > 0 )); then
+    SSID_USED=$1
+    PASSWD_USED=$2
+    SECURITY=$3
+    MGR=$4
+  else
+    source $1
+  fi
 else
   SSID_USED="jedway-wpa2-x2048-5-3"
   PASSWD_USED="jedway-wpa2-x2048-5-3"
@@ -40,50 +46,97 @@ function testgroup_delete_group {
   ./scenario.py --load test_l3_scenario_throughput;./testgroup.py --group_name group1 --add_group --add_cx cx0000,cx0001,cx0002 --remove_cx cx0003;./testgroup.py --group_name group1--del_group --debug
 }
 #Test array
-testCommands=(
-    #"../cpu_stats.py --duration 15"
-    "./example_security_connection.py --num_stations $NUM_STA --ssid jedway-wpa-1 --passwd jedway-wpa-1 --radio $RADIO_USED --security wpa --debug"
-    "./example_security_connection.py --num_stations $NUM_STA --ssid $SSID_USED --passwd $PASSWD_USED --radio $RADIO_USED --security wpa2 --debug"
-    "./example_security_connection.py --num_stations $NUM_STA --ssid jedway-wep-48 --passwd 0123456789 --radio $RADIO_USED --security wep --debug"
-    "./example_security_connection.py --num_stations $NUM_STA --ssid jedway-wpa3-1 --passwd jedway-wpa3-1 --radio $RADIO_USED --security wpa3 --debug"
-    "./sta_connect2.py --dut_ssid $SSID_USED --dut_passwd $PASSWD_USED --dut_security $SECURITY"
-    "./test_fileio.py --macvlan_parent eth2 --num_ports 3 --use_macvlans --first_mvlan_ip 192.168.92.13 --netmask 255.255.255.0 --gateway 192.168.92.1" # Better tested on Kelly, where VRF is turned off
-    "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type lfping --dest 10.40.0.1 --debug"
-    "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type speedtest --speedtest_min_up 20 --speedtest_min_dl 20 --speedtest_max_ping 150 --security $SECURITY --debug"
-    "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type iperf3 --debug"
-    "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type lfcurl --dest 10.40.0.1 --file_output /home/lanforge/Documents/lfcurl_output.txt --debug"
-    "./testgroup.py --group_name group1 --add_group --list_groups --debug"
-    testgroup_list_groups
-    testgroup_list_connections
-    testgroup_delete_group
-    "./testgroup2.py --num_stations 4 --mgr 192.168.1.10 --ssid lanforge --passwd password --security wpa2 --radio wiphy0 --group_name group0 --add_group"
-    "./test_ipv4_connection.py --radio $RADIO_USED --num_stations $NUM_STA --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
-    "./test_ipv4_l4_urls_per_ten.py --radio $RADIO_USED --num_stations $NUM_STA --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --num_tests 1 --requests_per_ten 600 --target_per_ten 600 --debug"
-    "./test_ipv4_l4_wifi.py --radio $RADIO_USED --num_stations $NUM_STA --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --test_duration 15s --debug"
-    "./test_ipv4_l4.py --radio $RADIO_USED --num_stations 4 --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --test_duration 15s --debug"
-    "./test_ipv4_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --output_format excel --layer3_cols $COL_NAMES --debug"
-    "./test_ipv4_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --output_format csv --layer3_cols $COL_NAMES --debug"
-    "./test_ipv4_l4_ftp_upload.py --upstream_port eth1 --radio $RADIO_USED --num_stations $NUM_STA --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --test_duration 15s --debug"
-    "./test_ipv6_connection.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
-    "./test_ipv6_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --cx_type tcp6 --debug"
-    run_l3_longevity
-    "./test_l3_powersave_traffic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
-    #"./test_l3_scenario_throughput.py -t 15s -sc test_l3_scenario_throughput"
-    "./test_status_msg.py --debug " #this is all which is needed to run
-    #"./test_wanlink.py --debug"
-    #"./ws_generic_monitor_test.py"
-    "../py-json/ws-sta-monitor.py --debug"
-    "./create_bridge.py --radio wiphy1 --upstream_port eth1 --target_device sta0000 --debug"
-    "./create_l3.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
-    "./create_l4.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
-    "./create_macvlan.py --radio wiphy1 --macvlan_parent eth1 --debug"
-    "./create_station.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
-    "./create_vap.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
-    "./wlan_capacity_calculator.py -sta 11abg -t Voice -p 48 -m 106 -e WEP -q Yes -b 1 2 5.5 11 -pre Long -s N/A -co G.711 -r Yes -c Yes"
-    "./wlan_capacity_calculator.py -sta 11n -t Voice -d 17 -ch 40 -gu 800 -high 9 -e WEP -q Yes -ip 5 -mc 42 -b 6 9 12 24 -m 1538 -co G.729 -pl Greenfield -cw 15 -r Yes -c Yes"
-    "./wlan_capacity_calculator.py -sta 11ac -t Voice -d 9 -spa 3 -ch 20 -gu 800 -high 1 -e TKIP -q Yes -ip 3 -mc 0 -b 6 12 24 54 -m 1518 -co Greenfield -cw 15 -rc Yes"
-    "./new_script.py --flags"
-)
+if (( $MGR > 0 )); then
+  testCommands=(
+      #"../cpu_stats.py --duration 15"
+      "./example_security_connection.py --num_stations $NUM_STA --ssid jedway-wpa-1 --passwd jedway-wpa-1 --radio $RADIO_USED --security wpa --debug --mgr $MGR"
+      "./example_security_connection.py --num_stations $NUM_STA --ssid $SSID_USED --passwd $PASSWD_USED --radio $RADIO_USED --security wpa2 --debug --mgr $MGR"
+      "./example_security_connection.py --num_stations $NUM_STA --ssid jedway-wep-48 --passwd 0123456789 --radio $RADIO_USED --security wep --debug --mgr $MGR"
+      "./example_security_connection.py --num_stations $NUM_STA --ssid jedway-wpa3-1 --passwd jedway-wpa3-1 --radio $RADIO_USED --security wpa3 --debug --mgr $MGR"
+      "./sta_connect2.py --dut_ssid $SSID_USED --dut_passwd $PASSWD_USED --dut_security $SECURITY --mgr $MGR"
+      "./test_fileio.py --macvlan_parent eth2 --num_ports 3 --use_macvlans --first_mvlan_ip 192.168.92.13 --netmask 255.255.255.0 --gateway 192.168.92.1 --mgr $MGR" # Better tested on Kelly, where VRF is turned off
+      "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type lfping --dest 10.40.0.1 --debug --mgr $MGR"
+      "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type speedtest --speedtest_min_up 20 --speedtest_min_dl 20 --speedtest_max_ping 150 --security $SECURITY --debug --mgr $MGR"
+      "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type iperf3 --debug --mgr $MGR"
+      "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type lfcurl --dest 10.40.0.1 --file_output /home/lanforge/Documents/lfcurl_output.txt --debug --mgr $MGR"
+      "./testgroup.py --group_name group1 --add_group --list_groups --debug --mgr $MGR"
+      testgroup_list_groups
+      testgroup_list_connections
+      testgroup_delete_group
+      "./testgroup2.py --num_stations 4 --ssid lanforge --passwd password --security wpa2 --radio wiphy0 --group_name group0 --add_group --mgr $MGR"
+      "./test_ipv4_connection.py --radio $RADIO_USED --num_stations $NUM_STA --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
+      "./test_ipv4_l4_urls_per_ten.py --radio $RADIO_USED --num_stations $NUM_STA --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --num_tests 1 --requests_per_ten 600 --target_per_ten 600 --debug --mgr $MGR"
+      "./test_ipv4_l4_wifi.py --radio $RADIO_USED --num_stations $NUM_STA --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --test_duration 15s --debug --mgr $MGR"
+      "./test_ipv4_l4.py --radio $RADIO_USED --num_stations 4 --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --test_duration 15s --debug --mgr $MGR"
+      "./test_ipv4_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --output_format excel --layer3_cols $COL_NAMES --debug --mgr $MGR"
+      "./test_ipv4_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --output_format csv --layer3_cols $COL_NAMES --debug --mgr $MGR"
+      "./test_ipv4_l4_ftp_upload.py --upstream_port eth1 --radio $RADIO_USED --num_stations $NUM_STA --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --test_duration 15s --debug --mgr $MGR"
+      "./test_ipv6_connection.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
+      "./test_ipv6_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --cx_type tcp6 --debug --mgr $MGR"
+      run_l3_longevity
+      "./test_l3_powersave_traffic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
+      #"./test_l3_scenario_throughput.py -t 15s -sc test_l3_scenario_throughput --mgr $MGR"
+      "./test_status_msg.py --debug --mgr $MGR" #this is all which is needed to run
+      #"./test_wanlink.py --debug --mgr $MGR"
+      #"./ws_generic_monitor_test.py --mgr $MGR"
+      "../py-json/ws-sta-monitor.py --debug --mgr $MGR"
+      "./create_bridge.py --radio wiphy1 --upstream_port eth1 --target_device sta0000 --debug --mgr $MGR"
+      "./create_l3.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
+      "./create_l4.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
+      "./create_macvlan.py --radio wiphy1 --macvlan_parent eth1 --debug --mgr $MGR"
+      "./create_station.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
+      "./create_vap.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
+      "./wlan_capacity_calculator.py -sta 11abg -t Voice -p 48 -m 106 -e WEP -q Yes -b 1 2 5.5 11 -pre Long -s N/A -co G.711 -r Yes -c Yes --mgr $MGR"
+      "./wlan_capacity_calculator.py -sta 11n -t Voice -d 17 -ch 40 -gu 800 -high 9 -e WEP -q Yes -ip 5 -mc 42 -b 6 9 12 24 -m 1538 -co G.729 -pl Greenfield -cw 15 -r Yes -c Yes --mgr $MGR"
+      "./wlan_capacity_calculator.py -sta 11ac -t Voice -d 9 -spa 3 -ch 20 -gu 800 -high 1 -e TKIP -q Yes -ip 3 -mc 0 -b 6 12 24 54 -m 1518 -co Greenfield -cw 15 -rc Yes --mgr $MGR"
+      "./new_script.py --flags --mgr $MGR"
+  )
+else
+  testCommands=(
+      #"../cpu_stats.py --duration 15"
+      "./example_security_connection.py --num_stations $NUM_STA --ssid jedway-wpa-1 --passwd jedway-wpa-1 --radio $RADIO_USED --security wpa --debug"
+      "./example_security_connection.py --num_stations $NUM_STA --ssid $SSID_USED --passwd $PASSWD_USED --radio $RADIO_USED --security wpa2 --debug"
+      "./example_security_connection.py --num_stations $NUM_STA --ssid jedway-wep-48 --passwd 0123456789 --radio $RADIO_USED --security wep --debug"
+      "./example_security_connection.py --num_stations $NUM_STA --ssid jedway-wpa3-1 --passwd jedway-wpa3-1 --radio $RADIO_USED --security wpa3 --debug"
+      "./sta_connect2.py --dut_ssid $SSID_USED --dut_passwd $PASSWD_USED --dut_security $SECURITY"
+      "./test_fileio.py --macvlan_parent eth2 --num_ports 3 --use_macvlans --first_mvlan_ip 192.168.92.13 --netmask 255.255.255.0 --gateway 192.168.92.1" # Better tested on Kelly, where VRF is turned off
+      "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type lfping --dest 10.40.0.1 --debug"
+      "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type speedtest --speedtest_min_up 20 --speedtest_min_dl 20 --speedtest_max_ping 150 --security $SECURITY --debug"
+      "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type iperf3 --debug"
+      "./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED  --security $SECURITY --num_stations $NUM_STA --type lfcurl --dest 10.40.0.1 --file_output /home/lanforge/Documents/lfcurl_output.txt --debug"
+      "./testgroup.py --group_name group1 --add_group --list_groups --debug"
+      testgroup_list_groups
+      testgroup_list_connections
+      testgroup_delete_group
+      "./testgroup2.py --num_stations 4 --ssid lanforge --passwd password --security wpa2 --radio wiphy0 --group_name group0 --add_group"
+      "./test_ipv4_connection.py --radio $RADIO_USED --num_stations $NUM_STA --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
+      "./test_ipv4_l4_urls_per_ten.py --radio $RADIO_USED --num_stations $NUM_STA --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --num_tests 1 --requests_per_ten 600 --target_per_ten 600 --debug"
+      "./test_ipv4_l4_wifi.py --radio $RADIO_USED --num_stations $NUM_STA --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --test_duration 15s --debug"
+      "./test_ipv4_l4.py --radio $RADIO_USED --num_stations 4 --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --test_duration 15s --debug"
+      "./test_ipv4_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --output_format excel --layer3_cols $COL_NAMES --debug"
+      "./test_ipv4_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --output_format csv --layer3_cols $COL_NAMES --debug"
+      "./test_ipv4_l4_ftp_upload.py --upstream_port eth1 --radio $RADIO_USED --num_stations $NUM_STA --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --test_duration 15s --debug"
+      "./test_ipv6_connection.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
+      "./test_ipv6_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --cx_type tcp6 --debug"
+      run_l3_longevity
+      "./test_l3_powersave_traffic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
+      #"./test_l3_scenario_throughput.py -t 15s -sc test_l3_scenario_throughput"
+      "./test_status_msg.py --debug " #this is all which is needed to run
+      #"./test_wanlink.py --debug"
+      #"./ws_generic_monitor_test.py"
+      "../py-json/ws-sta-monitor.py --debug"
+      "./create_bridge.py --radio wiphy1 --upstream_port eth1 --target_device sta0000 --debug"
+      "./create_l3.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
+      "./create_l4.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
+      "./create_macvlan.py --radio wiphy1 --macvlan_parent eth1 --debug"
+      "./create_station.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
+      "./create_vap.py --radio wiphy1 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug"
+      "./wlan_capacity_calculator.py -sta 11abg -t Voice -p 48 -m 106 -e WEP -q Yes -b 1 2 5.5 11 -pre Long -s N/A -co G.711 -r Yes -c Yes"
+      "./wlan_capacity_calculator.py -sta 11n -t Voice -d 17 -ch 40 -gu 800 -high 9 -e WEP -q Yes -ip 5 -mc 42 -b 6 9 12 24 -m 1538 -co G.729 -pl Greenfield -cw 15 -r Yes -c Yes"
+      "./wlan_capacity_calculator.py -sta 11ac -t Voice -d 9 -spa 3 -ch 20 -gu 800 -high 1 -e TKIP -q Yes -ip 3 -mc 0 -b 6 12 24 54 -m 1518 -co Greenfield -cw 15 -rc Yes"
+      "./new_script.py --flags"
+  )
+fi
 #declare -A name_to_num
 #if you want to run just one test as part of regression_test, you can call one test by calling its name_to_num identifier.
 name_to_num=(
diff --git a/py-scripts/regression_test.txt b/py-scripts/regression_test.txt
new file mode 100644
index 00000000..e69de29b