diff --git a/gui/basic_regression.bash b/gui/basic_regression.bash
index be5ad82e..752a9860 100755
--- a/gui/basic_regression.bash
+++ b/gui/basic_regression.bash
@@ -11,6 +11,14 @@
 #
 #
 
+# Disable stdout buffering in python so that we get serial console log
+# output promptly.
+PYTHONUNBUFFERED=1
+export PYTHONUNBUFFERED
+
+AP_SERIAL=${AP_SERIAL:-NONE}
+LF_SERIAL=${LF_SERIAL:-NONE}
+LFPASSWD=${LFPASSWD:-lanforge}  # Root password on LANforge machine
 AP_AUTO_CFG_FILE=${AP_AUTO_CFG_FILE:-test_configs/AP-Auto-ap-auto-32-64-dual.txt}
 WCT_CFG_FILE=${WCT_CFG_FILE:-test_configs/WCT-64sta.txt}
 DPT_CFG_FILE=${DPT_CFG_FILE:-test_configs/dpt-pkt-sz.txt}
@@ -66,7 +74,7 @@ RSLTS_DIR=${RSLTS_DIR:-basic_regression_results_$DATESTR}
 AP_AUTO_CFG=ben
 WCT_CFG=ben
 DPT_CFG=ben
-SCENARIO=64sta
+SCENARIO=tip-auto
 RPT_TMPDIR=${MY_TMPDIR}/lf_reports
 
 # Query DUT from the scenario
@@ -74,9 +82,61 @@ DUT=`grep DUT: $SCENARIO_CFG_FILE |head -1|grep -o "DUT: .*"|cut -f2 -d ' '`
 
 echo "Found DUT: $DUT from scenario $SCENARIO_CFG_FILE"
 
-mkdir -p $RSLTS_DIR
+function pre_test {
+    # Clean logs, this bounces radios and such too as side effect
+    ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --cmd "cli admin clean_logs"
+
+    if [ "_${LF_SERIAL}" != "_NONE" ]
+    then
+        # Kill any existing processes on this serial port
+        pkill -f ".*openwrt_ctl.*$LF_SERIAL.*"
+        ../openwrt_ctl.py --action lurk --tty $LF_SERIAL --scheme serial --user root --passwd $LFPASSWD --prompt "\[root@" >  $MY_TMPDIR/lanforge_console_log.txt 2>&1 &
+    fi
+
+    if [ "_${AP_SERIAL}" != "_NONE" ]
+    then
+        # Kill any existing processes on this serial port
+        pkill -f ".*openwrt_ctl.*$AP_SERIAL.*"
+        ../openwrt_ctl.py --action logread --tty $AP_SERIAL --scheme serial >  $MY_TMPDIR/dut_console_log.txt 2>&1 &
+    fi
+}
+
+function post_test {
+    DEST=$1
+    mkdir -p $DEST/logs
+
+    if [ "_${LF_SERIAL}" != "_NONE" ]
+        then
+        # Kill any existing processes on this serial port
+        pkill -f ".*openwrt_ctl.*$LF_SERIAL.*"
+        mv $MY_TMPDIR/lanforge_console_log.txt $DEST/logs/
+    fi
+
+    if [ "_${AP_SERIAL}" != "_NONE" ]
+        then
+        # Kill any existing processes on this serial port
+        pkill -f ".*openwrt_ctl.*$AP_SERIAL.*"
+        mv $MY_TMPDIR/dut_console_log.txt $DEST/logs/
+    fi
+
+    mv $MY_TMPDIR/basic_regression_log.txt $DEST/logs/test_automation_log.txt
+    if [ -f /home/lanforge/lanforge_log_0.txt ]
+    then
+        # Must be running on LF itself
+        cp /home/lanforge/lanforge_log_*.txt* $DEST/logs/
+        cp /home/lanforge/wifi/*log* $DEST/logs/
+    else
+        # Try via scp.  Root perms needed to read wifi logs, thus root@
+        scp root@$LFMANAGER:/home/lanforge/lanforge_log_*.txt* $DEST/logs/
+        scp root@$LFMANAGER:/home/lanforge/wifi/*log* $DEST/logs/
+    fi
+}
+
 
 set -x
+
+mkdir -p $RSLTS_DIR
+
 # Load scenario file
 ../lf_testmod.pl --mgr $LFMANAGER --action set --test_type Network-Connectivity --test_name $SCENARIO --file $SCENARIO_CFG_FILE
 
@@ -101,7 +161,7 @@ fi
 ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --cmd "cli show_dut"
 
 # Pause to let GUI finish getting data from the server
-sleep 10
+sleep 20
 
 # Tell GUI to load and build the scenario
 ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --scenario $SCENARIO
@@ -117,19 +177,21 @@ fi
 echo "Checking if we should run Dataplane packet size test."
 if [ "_$DO_DPT_PKT_SZ" == "_1" ]
 then
+    pre_test
     ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --ttype "Dataplane" --tname dpt-ben  --tconfig $DPT_CFG \
         --modifier_key "Test Rig ID:" --modifier_val "$TEST_RIG_ID" \
         --modifier_key "DUT_NAME" --modifier_val "$DUT" \
         --modifier_key "Show Low-Level Graphs" --modifier_val true \
         --rpt_dest $RPT_TMPDIR > $MY_TMPDIR/basic_regression_log.txt 2>&1
     mv $RPT_TMPDIR/* $RSLTS_DIR/dataplane_pkt_sz
-    mv $MY_TMPDIR/basic_regression_log.txt $RSLTS_DIR/dataplane_pkt_sz/test_automation.txt
+    post_test $RSLTS_DIR/dataplane_pkt_sz
 fi
 
 # Do capacity test
 echo "Checking if we should run WCT Download test."
 if [ "_$DO_WCT_DL" == "_1" ]
 then
+    pre_test
     ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --ttype "WiFi Capacity" --tname wct-ben  --tconfig $WCT_CFG \
         --modifier_key "Test Rig ID:" --modifier_val "$TEST_RIG_ID" \
         --modifier_key "DUT_NAME" --modifier_val "$DUT" \
@@ -137,12 +199,13 @@ then
         --modifier_key "RATE_UL" --modifier_val "0" \
         --rpt_dest $RPT_TMPDIR > $MY_TMPDIR/basic_regression_log.txt 2>&1
     mv $RPT_TMPDIR/* $RSLTS_DIR/wifi_capacity_dl
-    mv $MY_TMPDIR/basic_regression_log.txt $RSLTS_DIR/wifi_capacity_dl/test_automation.txt
+    post_test $RSLTS_DIR/wifi_capacity_dl
 fi
 
 echo "Checking if we should run WCT Upload test."
 if [ "_$DO_WCT_UL" == "_1" ]
 then
+    pre_test
     ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --ttype "WiFi Capacity" --tname wct-ben  --tconfig $WCT_CFG \
         --modifier_key "Test Rig ID:" --modifier_val "$TEST_RIG_ID" \
         --modifier_key "DUT_NAME" --modifier_val "$DUT" \
@@ -150,12 +213,13 @@ then
         --modifier_key "RATE_DL" --modifier_val "0" \
         --rpt_dest $RPT_TMPDIR > $MY_TMPDIR/basic_regression_log.txt 2>&1
     mv $RPT_TMPDIR/* $RSLTS_DIR/wifi_capacity_ul
-    mv $MY_TMPDIR/basic_regression_log.txt $RSLTS_DIR/wifi_capacity_ul/test_automation.txt
+    post_test $RSLTS_DIR/wifi_capacity_ul
 fi
 
 echo "Checking if we should run WCT Bi-Direction test."
 if [ "_$DO_WCT_BI" == "_1" ]
 then
+    pre_test
     ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --ttype "WiFi Capacity" --tname wct-ben  --tconfig $WCT_CFG \
         --modifier_key "Test Rig ID:" --modifier_val "$TEST_RIG_ID" \
         --modifier_key "DUT_NAME" --modifier_val "$DUT" \
@@ -164,7 +228,7 @@ then
         --modifier_key "Protocol:" --modifier_val "TCP-IPv4" \
         --rpt_dest $RPT_TMPDIR > $MY_TMPDIR/basic_regression_log.txt 2>&1
     mv $RPT_TMPDIR/* $RSLTS_DIR/wifi_capacity_bi
-    mv $MY_TMPDIR/basic_regression_log.txt $RSLTS_DIR/wifi_capacity_bi/test_automation.txt
+    post_test $RSLTS_DIR/wifi_capacity_bi
 fi
 
 
@@ -172,12 +236,13 @@ fi
 echo "Checking if we should run Short-AP Basic CX test."
 if [ "_$DO_SHORT_AP_BASIC_CX" == "_1" ]
 then
+    pre_test
     ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --ttype "AP-Auto" --tname ap-auto-ben --tconfig $AP_AUTO_CFG \
         --modifier_key "Test Rig ID:" --modifier_val "$TEST_RIG_ID" \
         --modifier_key "DUT_NAME" --modifier_val "$DUT" \
         --rpt_dest $RPT_TMPDIR > $MY_TMPDIR/basic_regression_log.txt 2>&1
     mv $RPT_TMPDIR/* $RSLTS_DIR/ap_auto_basic_cx
-    mv $MY_TMPDIR/basic_regression_log.txt $RSLTS_DIR/ap_auto_basic_cx/test_automation.txt
+    post_test $RSLTS_DIR/ap_auto_basic_cx
 fi
 
 # Run Throughput, Dual-Band, Capacity test in a row, the Capacity will use results from earlier
@@ -185,6 +250,7 @@ fi
 echo "Checking if we should run Short-AP Throughput test."
 if [ "_$DO_SHORT_AP_TPUT" == "_1" ]
 then
+    pre_test
     ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --ttype "AP-Auto" --tname ap-auto-ben --tconfig $AP_AUTO_CFG \
         --modifier_key "Test Rig ID:" --modifier_val "$TEST_RIG_ID" \
         --modifier_key "DUT_NAME" --modifier_val "$DUT" \
@@ -194,13 +260,14 @@ then
         --modifier_key "Capacity" --modifier_val true \
         --rpt_dest $RPT_TMPDIR > $MY_TMPDIR/basic_regression_log.txt 2>&1
     mv $RPT_TMPDIR/* $RSLTS_DIR/ap_auto_capacity
-    mv $MY_TMPDIR/basic_regression_log.txt $RSLTS_DIR/ap_auto_capacity/test_automation.txt
+    post_test $RSLTS_DIR/ap_auto_capacity
 fi
 
 # Run Stability test (single port resets, voip, tcp, udp)
 echo "Checking if we should run Short-AP Stability Reset test."
 if [ "_$DO_SHORT_AP_STABILITY_RESET" == "_1" ]
 then
+    pre_test
     ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --ttype "AP-Auto" --tname ap-auto-ben --tconfig $AP_AUTO_CFG \
         --modifier_key "Test Rig ID:" --modifier_val "$TEST_RIG_ID" \
         --modifier_key "DUT_NAME" --modifier_val "$DUT" \
@@ -209,13 +276,14 @@ then
         --modifier_key "Stability Duration:" --modifier_val $STABILITY_DURATION \
         --rpt_dest  $RPT_TMPDIR > $MY_TMPDIR/basic_regression_log.txt 2>&1
     mv $RPT_TMPDIR/* $RSLTS_DIR/ap_auto_stability_reset_ports
-    mv $MY_TMPDIR/basic_regression_log.txt $RSLTS_DIR/ap_auto_stability_reset_ports/test_automation.txt
+    post_test $RSLTS_DIR/ap_auto_stability_reset_ports
 fi
 
 # Run Stability test (radio resets, voip, tcp, udp)
 echo "Checking if we should run Short-AP Stability Radio Reset test."
 if [ "_$DO_SHORT_AP_STABILITY_RADIO_RESET" == "_1" ]
 then
+    pre_test
     ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --ttype "AP-Auto" --tname ap-auto-ben --tconfig $AP_AUTO_CFG \
         --modifier_key "Test Rig ID:" --modifier_val "$TEST_RIG_ID" \
         --modifier_key "DUT_NAME" --modifier_val "$DUT" \
@@ -225,13 +293,14 @@ then
         --modifier_key "Reset Radios" --modifier_val true \
         --rpt_dest  $RPT_TMPDIR > $MY_TMPDIR/basic_regression_log.txt 2>&1
     mv $RPT_TMPDIR/* $RSLTS_DIR/ap_auto_stability_reset_radios
-    mv $MY_TMPDIR/basic_regression_log.txt $RSLTS_DIR/ap_auto_stability_reset_radios/test_automation.txt
+    post_test $RSLTS_DIR/ap_auto_stability_reset_radios
 fi
 
 # Run Stability test (no resets, no voip, tcp, udp)
 echo "Checking if we should run Short-AP Stability No-Reset test."
 if [ "_$DO_SHORT_AP_STABILITY_NO_RESET" == "_1" ]
 then
+    pre_test
     ../lf_gui_cmd.pl --manager $GMANAGER --port $GMPORT --ttype "AP-Auto" --tname ap-auto-ben --tconfig $AP_AUTO_CFG \
         --modifier_key "Test Rig ID:" --modifier_val "$TEST_RIG_ID" \
         --modifier_key "DUT_NAME" --modifier_val "$DUT" \
@@ -242,7 +311,18 @@ then
         --modifier_key "Concurrent Ports To Reset:" --modifier_val 0 \
         --rpt_dest  $RPT_TMPDIR > $MY_TMPDIR/basic_regression_log.txt 2>&1
     mv $RPT_TMPDIR/* $RSLTS_DIR/ap_auto_stability_no_reset
-    mv $MY_TMPDIR/basic_regression_log.txt $RSLTS_DIR/ap_auto_stability_no_reset/test_automation.txt
+    post_test $RSLTS_DIR/ap_auto_stability_no_reset
+fi
+
+if [ "_${LFLOG_PID}" != "_" ]
+then
+    kill $LFLOG_PID
+    mv $MY_TMPDIR/lanforge_console_log.txt $RSLTS_DIR/
+fi
+if [ "_${DUTLOG_PID}" != "_" ]
+then
+    kill $DUTLOG_PID
+    mv $MY_TMPDIR/dut_console_log.txt $RSLTS_DIR/
 fi
 
 echo "Done with regression test."
diff --git a/openwrt_ctl.py b/openwrt_ctl.py
new file mode 100755
index 00000000..e5e3ea89
--- /dev/null
+++ b/openwrt_ctl.py
@@ -0,0 +1,256 @@
+#!/usr/bin/python3
+'''
+
+make sure pexpect is installed:
+$ sudo yum install python3-pexpect
+
+You might need to install pexpect-serial using pip:
+$ pip3 install pexpect-serial
+
+./openwrt_ctl.py -l stdout -u root -p TIP -s serial --tty ttyUSB0
+'''
+
+
+import sys
+if sys.version_info[0] != 3:
+    print("This script requires Python 3")
+    exit()
+
+import re
+import logging
+import time
+from time import sleep
+import pprint
+import telnetlib
+import argparse
+import pexpect
+
+default_host = "localhost"
+default_ports = {
+   "serial": None,
+   "ssh":   22,
+   "telnet": 23
+}
+NL = "\n"
+CR = "\r\n"
+Q = '"'
+A = "'"
+FORMAT = '%(asctime)s %(name)s %(levelname)s: %(message)s'
+prompt = "root@OpenWrt:"
+
+def usage():
+   print("$0 used connect to OpenWrt AP or similar Linux machine:")
+   print("-d|--dest  IP address of the OpenWrt AP, for ssh/telnet scheme")
+   print("-o|--port  IP port of the OpenWrt AP, for ssh/telnet scheme")
+   print("-t|--tty   Serial port, if using serial scheme")
+   print("-u|--user  login name")
+   print("-p|--pass  password")
+   print("--prompt   Prompt to look for when commands are done (default: root@OpenWrt)")
+   print("-s|--scheme (serial|telnet|ssh): connect via serial, ssh or telnet")
+   print("-l|--log file log messages here")
+   print("--action (logread | journalctl | lurk | reboot | cmd")
+   print("--value (option to help complete the action")
+   print("-h|--help")
+
+# see https://stackoverflow.com/a/13306095/11014343
+class FileAdapter(object):
+    def __init__(self, logger):
+        self.logger = logger
+    def write(self, data):
+        # NOTE: data can be a partial line, multiple lines
+        data = data.strip() # ignore leading/trailing whitespace
+        if data: # non-blank
+           self.logger.info(data)
+    def flush(self):
+        pass  # leave it to logging to flush properly
+
+def main():
+   global prompt
+
+   parser = argparse.ArgumentParser(description="OpenWrt AP Control Script")
+   parser.add_argument("-d", "--dest",    type=str, help="address of the cisco controller")
+   parser.add_argument("-o", "--port",    type=int, help="control port on the controller")
+   parser.add_argument("-u", "--user",    type=str, help="credential login/username")
+   parser.add_argument("-p", "--passwd",  type=str, help="credential password")
+   parser.add_argument("-P", "--prompt",  type=str, help="Prompt to look for")
+   parser.add_argument("-s", "--scheme",  type=str, choices=["serial", "ssh", "telnet"], help="Connect via serial, ssh or telnet")
+   parser.add_argument("-t", "--tty",     type=str, help="tty serial device")
+   parser.add_argument("-l", "--log",     type=str, help="logfile for messages, stdout means output to console")
+   parser.add_argument("--action",        type=str, help="perform action",
+      choices=["logread", "journalctl", "lurk", "reboot", "cmd" ])
+   parser.add_argument("--value",         type=str, help="set value")
+   tty = None
+
+   args = None
+   try:
+      args = parser.parse_args()
+      host = args.dest
+      scheme = args.scheme
+      port = args.port
+      #port = (default_ports[scheme], args.port)[args.port != None]
+      user = args.user
+      passwd = args.passwd
+      logfile = args.log
+      tty = args.tty;
+      if (args.prompt != None):
+          prompt = args.prompt
+      filehandler = None
+   except Exception as e:
+      logging.exception(e);
+      usage()
+      exit(2);
+
+   console_handler = logging.StreamHandler()
+   formatter = logging.Formatter(FORMAT)
+   logg = logging.getLogger(__name__)
+   logg.setLevel(logging.DEBUG)
+   file_handler = None
+   if (logfile is not None):
+       if (logfile != "stdout"):
+           file_handler = logging.FileHandler(logfile, "w")
+           file_handler.setLevel(logging.DEBUG)
+           file_handler.setFormatter(formatter)
+           logg.addHandler(file_handler)
+           logging.basicConfig(format=FORMAT, handlers=[file_handler])
+       else:
+           # stdout logging
+           logging.basicConfig(format=FORMAT, handlers=[console_handler])
+
+   CCPROMPT=prompt
+
+   ser = None
+   egg = None # think "eggpect"
+   try:
+      if (scheme == "serial"):
+         #eggspect = pexpect.fdpexpect.fdspan(telcon, logfile=sys.stdout.buffer)
+         import serial
+         from pexpect_serial import SerialSpawn
+         ser = serial.Serial(tty, 115200, timeout=5)
+
+         egg = SerialSpawn(ser);
+         egg.logfile = FileAdapter(logg)
+         egg.sendline(NL)
+         try:
+             i = egg.expect([prompt, "Please pres Enter to activate", "login:"], timeout=3)
+             if (i == 2):
+                 egg.sendline(user)
+                 egg.expect("Password:")
+                 egg.sendline(passwd)
+                 egg.expect(prompt)
+
+             egg.sendline(NL)
+         except Exception as e:
+             # maybe something like 'logread -f' is running?
+             # send ctrl-c
+             egg.send(chr(3))
+
+      elif (scheme == "ssh"):
+         # Not implemented/tested currently. --Ben
+         if (port is None):
+            port = 22
+         cmd = "ssh -p%d %s@%s"%(port, user, host)
+         logg.info("Spawn: "+cmd+NL)
+         egg = pexpect.spawn(cmd)
+         #egg.logfile_read = sys.stdout.buffer
+         egg.logfile = FileAdapter(logg)
+         i = egg.expect(["password:", "continue connecting (yes/no)?"], timeout=3)
+         time.sleep(0.1)
+         if i == 1:
+            egg.sendline('yes')
+            egg.expect('password:')
+         sleep(0.1)
+         egg.sendline(passwd)
+
+      elif (scheme == "telnet"):
+         # Not implemented/tested currently. --Ben
+         if (port is None):
+            port = 23
+         cmd = "telnet %s %d"%(host, port)
+         logg.info("Spawn: "+cmd+NL)
+         egg = pexpect.spawn(cmd)
+         egg.logfile = FileAdapter(logg)
+         time.sleep(0.1)
+         egg.sendline(' ')
+         egg.expect('User\:')
+         egg.sendline(user)
+         egg.expect('Password\:')
+         egg.sendline(passwd)
+         egg.sendline('config paging disable')
+      else:
+         usage()
+         exit(1)
+   except Exception as e:
+      logging.exception(e);
+
+   command = None
+
+   CLOSEDBYREMOTE = "closed by remote host."
+   CLOSEDCX = "Connection to .* closed."
+
+   egg.expect(CCPROMPT)
+   TO=10
+   wait_forever = False
+
+   # Clean pending output
+   egg.sendline("echo __hello__")
+   egg.expect("__hello__")
+   egg.expect(CCPROMPT)
+
+   logg.info("Action[%s] Value[%s] "%(args.action, args.value))
+
+   if (args.action == "reboot"):
+      command = "reboot"
+      TO=60
+
+   if (args.action == "cmd"):
+       if (args.value is None):
+           raise Exception("cmd requires value to be set.")
+       command = "%s"%(args.value)
+
+   if (args.action == "logread"):
+      command = "logread -f"
+      TO=1
+      wait_forever = True
+
+   if (args.action == "journalctl"):
+      command = "journalctl -f"
+      TO=1
+      wait_forever = True
+
+   if (args.action == "lurk"):
+      command = "date"
+      TO=1
+      wait_forever = True
+
+   if (command is None):
+      logg.info("No command specified, going to log out.")
+   else:
+      logg.info("Command[%s]"%command)
+      egg.sendline(command);
+      while True:
+          try:
+              i = egg.expect([CCPROMPT, "kmodloader: done loading kernel", "\n"], timeout=TO)
+              print (egg.before.decode('utf-8', 'ignore'))
+              if i == 1:
+                  egg.sendline(' ')
+                  egg.expect(CCPROMPT, timeout=20)
+                  print (egg.before.decode('utf-8', 'ignore'))
+              if i == 2: # new line of text, just print and continue
+                  continue
+
+              if not wait_forever:
+                  break
+          
+          except Exception as e:
+              # Some commands take a long time (logread -f)
+              if not wait_forever:
+                  logging.exception(e)
+                  break
+
+# ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -----
+if __name__ == '__main__':
+    main()
+
+####
+####
+####