mirror of
https://github.com/Telecominfraproject/wlan-lanforge-scripts.git
synced 2025-11-02 19:58:03 +00:00
lf_cisco_power.py cisco_wifi_ctl.py : LCS-48 wlan and wlan ssid need separate config
This commit is contained in:
Chuck SmileyRekiere
@@ -36,7 +36,7 @@ NOTE: Telnet port 23 unless specified , ssh port 22 unless specified, scheme
|
||||
--ap 9120_Candela --bandwidth "20" --channel "149" --nss 4 --txpower "1" \
|
||||
--pathloss 56 --band a --upstream_port eth2 --series 9800 --radio wiphy5 --slot 1 --ssid open-wlan \
|
||||
--prompt "katar_candela" --create_station sta0001 --ssidpw [BLANK] --security open --verbose \
|
||||
--antenna_gain "6" --wlan open-wlan --wlanID 1 \
|
||||
--antenna_gain "6" --wlanID 1 --wlan open-wlan --wlanSSID open-wlan\
|
||||
--ap_info "ap_scheme==telnet ap_prompt==9120_Candela ap_ip==172.19.27.55 ap_port==2008 ap_user==admin ap_pw==Wnbulab@123"
|
||||
|
||||
|
||||
@@ -53,13 +53,13 @@ NOTE: Telnet port 23 unless specified , ssh port 22 unless specified, scheme
|
||||
--series "3504" --prompt "(Cisco Controler)"
|
||||
|
||||
##############################################################################################
|
||||
# Long duration test -- need to create the --wlan open-wlan --wlanID - need to put in the notes
|
||||
# Long duration test -- need to create the ---wlanID 1 --wlan open-wlan --wlanSSID open-wlan
|
||||
##############################################################################################
|
||||
|
||||
./lf_cisco_power.py -d 172.19.36.168 -u admin -p Wnbulab@123 --port 23 --scheme telnet --ap "APA453.0E7B.CF60" \
|
||||
--bandwidth "20 40 80" --channel "36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165" \
|
||||
--nss 4 --txpower "1 2 3 4 5 6 7 8" --pathloss 54 --antenna_gain 6 --band a --upstream_port eth2 --series 9800 \
|
||||
--wlan open-wlan --wlanID 1 --create_station sta0001 --radio wiphy1 --ssid open-wlan --ssidpw [BLANK] --security open \
|
||||
--wlanID 1 --wlan open-wlan --wlanSSID open-wlan --create_station sta0001 --radio wiphy1 --ssid open-wlan --ssidpw [BLANK] --security open \
|
||||
--outfile cisco_power_results_60_chan_ALL --cleanup --slot 1 --verbose
|
||||
|
||||
|
||||
@@ -77,7 +77,7 @@ NOTE: Telnet port 23 unless specified , ssh port 22 unless specified, scheme
|
||||
|
||||
./lf_cisco_power.py -d <router IP> -u admin -p Cisco123 -port 23 --scheme telnet --ap AP6C71.0DE6.45D0 \
|
||||
--station sta2222 --bandwidth "20" --channel "36" --nss 4 --txpower "1 2 3 4 5 6 7 8" --pathloss 54 --antenna_gain 6 --band a \
|
||||
--upstream_port eth2 --series 9800 --wlan open-wlan --wlanID 1 --create_station sta2222 --radio wiphy1 --ssid open-wlan \
|
||||
--upstream_port eth2 --series 9800 --wlanID 1 --wlan open-wlan --wlanSSID open-wlan --create_station sta2222 --radio wiphy1 --ssid open-wlan \
|
||||
--ssidpw [BLANK] --security open --verbose
|
||||
|
||||
##############################################################################################
|
||||
@@ -86,7 +86,7 @@ NOTE: Telnet port 23 unless specified , ssh port 22 unless specified, scheme
|
||||
|
||||
./lf_cisco_power.py -d <router IP> -u admin -p Cisco123 -port 23 --scheme telnet --ap AP6C71.0DE6.45D0 \
|
||||
--station sta0000 --bandwidth "20" --channel "36" --nss 4 --txpower "1 2 3 4 5 6 7 8" --pathloss 64 --antenna_gain 5 --band a \
|
||||
--upstream_port eth2 --series 9800 --wlan open-wlan --wlanID 1 --verbose
|
||||
--upstream_port eth2 --series 9800 --wlanID 1 --wlan open-wlan --wlanSSID open-wlan --verbose
|
||||
|
||||
|
||||
##############################################################################################
|
||||
@@ -216,8 +216,9 @@ def usage():
|
||||
print("--pf_a4_dropoff: Allow one chain to use lower tx-power and still pass when doing 4x4. Default is 3")
|
||||
print("--wait_forever: <store true> Wait forever for station to associate, may aid debugging if STA cannot associate properly")
|
||||
print("--adjust_nf: <store true> Adjust RSSI based on noise-floor. ath10k without the use-real-noise-floor fix needs this option")
|
||||
print("--wlan: for 9800, wlan identifier defaults to wlan-open")
|
||||
print("--wlan: for 9800, wlan identifier ")
|
||||
print("--wlanID: wlanID for 9800 , defaults to 1")
|
||||
print("--wlanSSID: wlanSSID for 9800")
|
||||
print("--series: controller series 9800 , defaults to 3504")
|
||||
print("--slot: 9800 AP slot defaults to 1")
|
||||
print("--create_station", "create LANforge station at the beginning of the test")
|
||||
@@ -302,8 +303,9 @@ def main():
|
||||
parser.add_argument("--pf_a4_dropoff", type=str, help="Allow one chain to use lower tx-power and still pass when doing 4x4. Default is 3")
|
||||
parser.add_argument("--wait_forever", action='store_true', help="Wait forever for station to associate, may aid debugging if STA cannot associate properly")
|
||||
parser.add_argument("--adjust_nf", action='store_true', help="Adjust RSSI based on noise-floor. ath10k without the use-real-noise-floor fix needs this option")
|
||||
parser.add_argument("--wlan", type=str, help="--wlan 9800, wlan identifier, this must match the -ssid",required=True)
|
||||
parser.add_argument("--wlan", type=str, help="--wlan 9800, wlan identifier",required=True)
|
||||
parser.add_argument("--wlanID", type=str, help="--wlanID 9800 , defaults to 1",default="1",required=True)
|
||||
parser.add_argument("--wlanSSID", type=str, help="--wlan 9800, wlan SSID, this must match the -ssid , ssid for station",required=True)
|
||||
parser.add_argument("--series", type=str, help="--series 9800 or 3504, defaults to 9800",default="9800")
|
||||
parser.add_argument("--slot", type=str, help="--slot 1 , 9800 AP slot defaults to 1",default="1")
|
||||
parser.add_argument("--create_station", type=str, help="create LANforge station at the beginning of the test")
|
||||
@@ -364,9 +366,9 @@ def main():
|
||||
cap_ctl_out = False
|
||||
else:
|
||||
cap_ctl_out = True
|
||||
if (args.wlan != args.ssid):
|
||||
if (args.wlanSSID != args.ssid):
|
||||
print("####### ERROR ################################")
|
||||
print("wlan: {} must equial the station ssid: {}".format(args.wlan,args.ssid))
|
||||
print("wlanSSID: {} must equial the station ssid: {}".format(args.wlanSSID,args.ssid))
|
||||
print("####### ERROR ################################")
|
||||
exit(1)
|
||||
# note: there would always be an args.outfile due to the default
|
||||
@@ -811,7 +813,8 @@ def main():
|
||||
try:
|
||||
logg.info("9800 cisco_wifi_ctl.py: disable_wlan")
|
||||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||||
"--action", "disable_wlan","--wlan", args.wlan, "--wlanID", args.wlanID,"--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
"--action", "disable_wlan","--wlan", args.wlan, "--wlanID", args.wlanID, "--wlanSSID", args.wlanSSID,
|
||||
"--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
if cap_ctl_out:
|
||||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||||
logg.info(pss)
|
||||
@@ -941,7 +944,7 @@ def main():
|
||||
# only create the wlan the first time
|
||||
if args.series == "9800":
|
||||
if wlan_created:
|
||||
logg.info("wlan already present, no need to create wlan {} wlanID {} port {}".format(args.wlan, args.wlanID, args.port))
|
||||
logg.info("wlan already present, no need to create wlanID {} wlan {} wlanSSID {} port {}".format(args.wlanID, args.wlan, args.wlanSSID, args.port))
|
||||
pass
|
||||
else:
|
||||
# Verify that a wlan does not exist on wlanID
|
||||
@@ -971,12 +974,13 @@ def main():
|
||||
cc_wlan_ssid = m.group(2)
|
||||
# wlanID is in use
|
||||
logg.info("###############################################################################")
|
||||
logg.info("Need to remove wlan: {} wlanID: {} wlan ssid: {}".format(cc_wlan, args.wlanID, cc_wlan_ssid))
|
||||
logg.info("Need to remove wlanID: {} cc_wlan: {} cc_wlan_ssid: {}".format(args.wlanID, cc_wlan, cc_wlan_ssid))
|
||||
logg.info("###############################################################################")
|
||||
try:
|
||||
logg.info("9800 cisco_wifi_ctl.py: delete_wlan, wlan present at start of test: wlan: {} wlanID: {} wlan_ssid: {}".format(cc_wlan, args.wlanID, cc_wlan_ssid))
|
||||
logg.info("9800 cisco_wifi_ctl.py: delete_wlan, wlan present at start of test: wlanID: {} cc_wlan {} cc_wlan_ssid: {}".format(args.wlanID, cc_wlan, cc_wlan_ssid))
|
||||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||||
"--action", "delete_wlan","--series",args.series, "--wlan", args.wlan, "--wlanID", args.wlanID,"--port",args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
"--action", "delete_wlan","--series",args.series, "--wlanID", args.wlanID, "--wlan", cc_wlan, "--wlanSSID", cc_wlan_ssid,
|
||||
"--port",args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
if cap_ctl_out:
|
||||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||||
logg.info(pss)
|
||||
@@ -989,9 +993,9 @@ def main():
|
||||
wlan_created = True
|
||||
logg.info("create wlan {} wlanID {} port {}".format(args.wlan, args.wlanID, args.port))
|
||||
try:
|
||||
logg.info("9800 cisco_wifi_ctl.py: create_wlan wlan {} wlanID {} port {}".format(args.wlan, args.wlanID, args.port))
|
||||
logg.info("9800 cisco_wifi_ctl.py: create_wlan wlan {} wlanID {} wlanSSID {} port {}".format(args.wlan, args.wlanID, args.wlanSSID, args.port))
|
||||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||||
"--action", "create_wlan","--series",args.series, "--wlan", args.wlan, "--wlanID", args.wlanID,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
"--action", "create_wlan","--series",args.series, "--wlanID", args.wlanID,"--wlanSSID", "--wlan", args.wlan, args.wlanSSID, "--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
if cap_ctl_out:
|
||||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||||
logg.info(pss)
|
||||
@@ -1014,7 +1018,8 @@ def main():
|
||||
try:
|
||||
logg.info("9800 cisco_wifi_ctl.py: enable_wlan")
|
||||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||||
"--action", "enable_wlan","--wlan", args.wlan, "--wlanID", args.wlanID,"--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
"--action", "enable_wlan", "--wlanID", args.wlanID, "--wlan", args.wlan, "--wlanSSID", args.wlanSSID,
|
||||
"--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
if cap_ctl_out:
|
||||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||||
logg.info(pss)
|
||||
@@ -1903,7 +1908,8 @@ def main():
|
||||
try:
|
||||
logg.info("9800 cisco_wifi_ctl.py: delete_wlan")
|
||||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||||
"--action", "delete_wlan","--series",args.series, "--wlan", args.wlan, "--wlanID", args.wlanID,"--port",args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
"--action", "delete_wlan","--series",args.series, "--wlanID", args.wlanID, "--wlan", args.wlan, "--wlanSSID", args.wlanSSID,
|
||||
"--port",args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||||
if cap_ctl_out:
|
||||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||||
logg.info(pss)
|
||||
|
||||
Reference in New Issue
Block a user