diff --git a/py-scripts/test_fileio.py b/py-scripts/test_fileio.py
index 7dc26779..237144f0 100755
--- a/py-scripts/test_fileio.py
+++ b/py-scripts/test_fileio.py
@@ -7,8 +7,8 @@ macvlans can be used as well. Command line options are available to update cross
 existing cross-connects if desired. if none are given, cross-connects and endpoints will be created by the script.
 Modes such as read-only, write-only, or both can be specified as well as ip addresses and starting numbers for sequential
 stations or macvlans that are created in case of limited or pre-existing configurations. The test that is run during
-this script will depend on the mode used, a read-only test will check the read-bps column, write-only will check write-bps
-and both will check both columns. If the relevant columns increase over the duration of the test it will pass,
+this script will depend on the mode used, a read-only test will check the read-bps attribute, write-only will check write-bps
+and both will check both attributes. If the relevant attributes increase over the duration of the test it will pass,
 otherwise it will fail.
 
 Use './test_fileio.py --help' to see command line usage and options
diff --git a/py-scripts/test_generic.py b/py-scripts/test_generic.py
index 4fd19f0a..72cb4a13 100755
--- a/py-scripts/test_generic.py
+++ b/py-scripts/test_generic.py
@@ -3,7 +3,7 @@
 """test_generic.py will create stations and endpoints to generate traffic based on a command-line specified command type.
 
 This script will create a variable number of stations to test generic endpoints. Multiple command types can be tested
-including ping, speedtest, generic types. The test will check the last result column for different things
+including ping, speedtest, generic types. The test will check the last-result attribute for different things
 depending on what test is being run. Ping will test for successful pings, speedtest will test for download
 speed, upload speed, and ping time, generic will test for successful generic commands
 
diff --git a/py-scripts/test_ipv4_l4.py b/py-scripts/test_ipv4_l4.py
index 77b5ab80..4b4f4444 100755
--- a/py-scripts/test_ipv4_l4.py
+++ b/py-scripts/test_ipv4_l4.py
@@ -4,7 +4,7 @@
 
 This script will create a variable number of stations that will attempt to use layer 4 endpoints to generate traffic.
 A test will run for a specified amount of time with periodic checks for traffic successfully being received. The test will
-monitor the bytes-rd column of the endpoints. An increase at every test interval will pass the test, otherwise it will fail
+monitor the bytes-rd attribute of the endpoints. An increase at every test interval will pass the test, otherwise it will fail
 
 Use './test_ipv4_l4.py --help' to see command line usage and options
 Copyright 2021 Candela Technologies Inc
diff --git a/py-scripts/test_ipv4_l4_ftp_upload.py b/py-scripts/test_ipv4_l4_ftp_upload.py
index 134352e1..f2586653 100755
--- a/py-scripts/test_ipv4_l4_ftp_upload.py
+++ b/py-scripts/test_ipv4_l4_ftp_upload.py
@@ -4,7 +4,7 @@
 
 This script will create a variable number of stations that will attempt to use layer 4 endpoints to generate traffic over ftp.
 A test will run for a specified amount of time with periodic checks for traffic successfully being received. The test will
-monitor the bytes-wr column of the endpoints. An increase at every test interval will pass the test, otherwise it will fail
+monitor the bytes-wr attribute of the endpoints. An increase at every test interval will pass the test, otherwise it will fail
 
 Use './test_ipv4_l4_ftp_upload.py --help' to see command line usage and options
 Copyright 2021 Candela Technologies Inc
diff --git a/py-scripts/test_ipv4_l4_ftp_urls_per_ten.py b/py-scripts/test_ipv4_l4_ftp_urls_per_ten.py
index 6bb310db..68942bba 100755
--- a/py-scripts/test_ipv4_l4_ftp_urls_per_ten.py
+++ b/py-scripts/test_ipv4_l4_ftp_urls_per_ten.py
@@ -4,7 +4,7 @@
 
 This script will create a variable number of stations that will attempt to use layer 4 endpoints to generate traffic over ftp.
 A test will run a specified number of times with periodic checks for traffic successfully being received every ten minutes.
-The test will monitor the urls/s column of the endpoints. Being at or above 90% of the chosen url rate at each interval
+The test will monitor the urls/s attribute of the endpoints. Being at or above 90% of the chosen url rate at each interval
 will pass the test, otherwise it will fail
 
 Use './test_ipv4_l4_ftp_urls_per_ten.py --help' to see command line usage and options
diff --git a/py-scripts/test_ipv4_l4_ftp_wifi.py b/py-scripts/test_ipv4_l4_ftp_wifi.py
index ef263a0f..49ddf5fb 100755
--- a/py-scripts/test_ipv4_l4_ftp_wifi.py
+++ b/py-scripts/test_ipv4_l4_ftp_wifi.py
@@ -4,7 +4,7 @@
 
 This script will create a variable number of stations that will attempt to use layer 4 endpoints to generate traffic over ftp.
 A test will run for a specified amount of time with periodic checks for traffic successfully being received. The test will
-monitor the bytes-wr column of the endpoints. An increase at every test interval will pass the test, otherwise it will fail
+monitor the bytes-wr attribute of the endpoints. An increase at every test interval will pass the test, otherwise it will fail
 
 Use './test_ipv4_l4_ftp_wifi.py --help' to see command line usage and options
 Copyright 2021 Candela Technologies Inc
diff --git a/py-scripts/test_ipv4_l4_urls_per_ten.py b/py-scripts/test_ipv4_l4_urls_per_ten.py
index dee89d94..e2b442a9 100755
--- a/py-scripts/test_ipv4_l4_urls_per_ten.py
+++ b/py-scripts/test_ipv4_l4_urls_per_ten.py
@@ -4,7 +4,7 @@
 
 This script will create a variable number of stations that will attempt to use layer 4 endpoints to generate traffic.
 A test will run a specified number of times with periodic checks for traffic successfully being received every ten minutes.
-The test will monitor the urls/s column of the endpoints. Being at or above 90% of the chosen url rate at each interval
+The test will monitor the urls/s attribute of the endpoints. Being at or above 90% of the chosen url rate at each interval
 will pass the test, otherwise it will fail
 
 Use './test_ipv4_l4_urls_per_ten.py --help' to see command line usage and options
diff --git a/py-scripts/test_ipv4_l4_wifi.py b/py-scripts/test_ipv4_l4_wifi.py
index eb5b64ad..8d28ddf6 100755
--- a/py-scripts/test_ipv4_l4_wifi.py
+++ b/py-scripts/test_ipv4_l4_wifi.py
@@ -4,7 +4,7 @@
 
 This script will create a variable number of stations that will attempt to use layer 4 endpoints to generate traffic.
 A test will run for a specified amount of time with periodic checks for traffic successfully being received. The test will
-monitor the bytes-rd column of the endpoints. An increase at every test interval will pass the test, otherwise it will fail
+monitor the bytes-rd attribute of the endpoints. An increase at every test interval will pass the test, otherwise it will fail
 
 Use './test_ipv4_l4_wifi.py --help' to see command line usage and options
 Copyright 2021 Candela Technologies Inc