Added docstring for documentation and usage example

py-scripts/test_fileio.py

@@ -1,5 +1,18 @@
 #!/usr/bin/env python3
 
+"""
+    This script will create a variable number of stations or macvlans to test fileio traffic. Pre-existing stations and
+    macvlans can be used as well. Command line options are available to update cross-connects as well as using a list of
+    existing cross-connects if desired. if none are given, cross-connects and endpoints will be created by the script.
+    Modes such as read-only, write-only, or both can be specified as well as ip addresses and starting numbers for sequential
+    stations or macvlans that are created in case of limited or pre-existing configurations. The test that is run during
+    this script will depend on the mode used, a read-only test will check the read-bps column, write-only will check write-bps
+    and both will check both columns. If the relevant columns increase over the duration of the test it will pass,
+    otherwise it will fail.
+
+    Use './test_fileio.py --help' to see command line usage and options
+"""
+
 import sys
 if sys.version_info[0] != 3:
     print("This script requires Python 3")

py-scripts/test_generic.py

@@ -1,4 +1,14 @@
 #!/usr/bin/env python3
+
+"""
+    This script will create a variable number of stations to test generic endpoints. Multiple command types can be tested
+    including ping, speedtest, generic types. The test will check the last result column for different things
+    depending on what test is being run. Ping will test for successful pings, speedtest will test for download
+    speed, upload speed, and ping time, generic will test for successful generic commands
+
+    Use './test_generic.py --help' to see command line usage and options
+"""
+
 import pprint
 import sys
 import os
@@ -187,7 +197,8 @@ def main():
         prog='test_generic.py',
         formatter_class=argparse.RawTextHelpFormatter,
         epilog='''Create generic endpoints and test for their ability to execute chosen commands\n''',
-        description='''test_generic.py
+        description='''
+test_generic.py
 --------------------
 Generic command example:
 python3 ./test_generic.py 

py-scripts/test_ipv4_variable_time.py

@@ -1,5 +1,13 @@
 #!/usr/bin/env python3
 
+"""
+    This script will create a variable number of stations each with their own set of cross-connects and endpoints.
+    It will then create layer 3 traffic over a specified amount of time, testing for increased traffic at regular intervals.
+    This test will pass if all stations increase traffic over the full test duration.
+
+    Use './test_ipv4_variable_time.py --help' to see command line usage and options
+"""
+
 import sys
 import os
 
@@ -141,37 +149,37 @@ def main():
             ''',
 
         description='''\
-            test_ipv4_variable_time.py:
-            --------------------
-            Generic command layout:
+test_ipv4_variable_time.py:
+--------------------
+Generic command layout:
 
-            python3 ./test_ipv4_variable_time.py
-                --upstream_port eth1
-                --radio wiphy0
-                --num_stations 32
-                --security {open|wep|wpa|wpa2|wpa3} \\
-                --mode   1
-                    {"auto"   : "0",
-                    "a"      : "1",
-                    "b"      : "2",
-                    "g"      : "3",
-                    "abg"    : "4",
-                    "abgn"   : "5",
-                    "bgn"    : "6",
-                    "bg"     : "7",
-                    "abgnAC" : "8",
-                    "anAC"   : "9",
-                    "an"     : "10",
-                    "bgnAC"  : "11",
-                    "abgnAX" : "12",
-                    "bgnAX"  : "13",
-                --ssid netgear
-                --password admin123
-                --test_duration 2m (default)
-                --a_min 1000
-                --b_min 1000
-                --ap "00:0e:8e:78:e1:76"
-                --debug
+python3 ./test_ipv4_variable_time.py
+    --upstream_port eth1
+    --radio wiphy0
+    --num_stations 32
+    --security {open|wep|wpa|wpa2|wpa3} \\
+    --mode   1
+        {"auto"   : "0",
+        "a"      : "1",
+        "b"      : "2",
+        "g"      : "3",
+        "abg"    : "4",
+        "abgn"   : "5",
+        "bgn"    : "6",
+        "bg"     : "7",
+        "abgnAC" : "8",
+        "anAC"   : "9",
+        "an"     : "10",
+        "bgnAC"  : "11",
+        "abgnAX" : "12",
+        "bgnAX"  : "13",
+    --ssid netgear
+    --password admin123
+    --test_duration 2m (default)
+    --a_min 1000
+    --b_min 1000
+    --ap "00:0e:8e:78:e1:76"
+    --debug
             ''')
 
     required_args=None

py-scripts/test_ipv6_connection.py

@@ -1,5 +1,13 @@
 #!/usr/bin/env python3
 
+"""
+    Script for creating a variable number of stations and attempting to connect them to an SSID using IPv6.
+    A test will run to verify stations are associated and get an IP, if these conditions are both true, the test will
+    pass, otherwise, the test will fail.
+
+    Use './test_ipv6_connection.py --help' to see command line usage and options
+"""
+
 import sys
 import os
 if sys.version_info[0] != 3:
@@ -129,7 +137,7 @@ def main():
                 ''',
 
         description='''\
-    test_ipv6_connection.py:
+test_ipv6_connection.py:
 --------------------------------------------------
 Generic command example:
 python3 ./test_ipv6_connection.py 

py-scripts/test_ipv6_variable_time.py

@@ -1,5 +1,13 @@
 #!/usr/bin/env python3
 
+"""
+    This script will create a variable number of stations, using IPv6, each with their own set of cross-connects and endpoints.
+    It will then create layer 3 traffic over a specified amount of time, testing for increased traffic at regular intervals.
+    This test will pass if all stations increase traffic over the full test duration.
+
+    Use './test_ipv6_variable_time.py --help' to see command line usage and options
+"""
+
 import sys
 import os