From 8a362f757bdcb55b953489d29237af47b427fc80 Mon Sep 17 00:00:00 2001 From: Matthew Stidham Date: Thu, 6 May 2021 17:14:52 -0700 Subject: [PATCH] dut_to_grafana Signed-off-by: Matthew Stidham --- py-scripts/dut_to_grafana.sh | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100755 py-scripts/dut_to_grafana.sh diff --git a/py-scripts/dut_to_grafana.sh b/py-scripts/dut_to_grafana.sh new file mode 100755 index 00000000..b06b2733 --- /dev/null +++ b/py-scripts/dut_to_grafana.sh @@ -0,0 +1,19 @@ +#!/bin/bash +########################## +# Help +########################## +Help() +{ + echo "This bash script creates a DUT, loads a scenario, runs a WiFi Capacity test, and saves it to Influx" +} + +#Replace my arguments with your setup. Separate your ssid arguments with spaces and ensure the names are lowercase +echo "Make new DUT" +./create_chamberview_dut.py --lfmgr 192.168.1.7 --dut_name DUT_TO_GRAFANA_DUT --ssid "ssid_idx=0 ssid=lanforge security=WPA2 password=password bssid=04:f0:21:2c:41:84 traffic=wiphy1" + +echo "Build Chamber View Scenario" #change the lfmgr to your system, set the radio to a working radio on your LANforge system, same with the ethernet port. +./create_chamberview.py --lfmgr 192.168.1.7 --create_scenario DUT_TO_GRAFANA_SCENARIO --line "Resource=1.1 Profile=default Amount=32 Uses-1=wiphy1 DUT=DUT_TO_GRAFANA_DUT Traffic=wiphy1 Freq=-1" --line "Resource=1.1 Profile=upstream Amount=1 Uses-1=eth1 DUT=DUT_TO_GRAFANA_DUT Traffic=eth1 Freq=-1" + +#config_name doesn't matter, change the influx_host to your LANforge device, +echo "run wifi capacity test" +./lf_wifi_capacity_test.py --config_name Custom --create_stations --radio wiphy1 --pull_report --influx_host 192.168.1.7 --influx_port 8086 --influx_org Candela --influx_token Tdxwq5KRbj1oNbZ_ErPL5tw_HUH2wJ1VR4dwZNugJ-APz__mEFIwnqHZdoobmQpt2fa1VdWMlHQClR8XNotwbg== --influx_bucket lanforge --mgr 192.168.1.7 --instance_name testing --upstream eth1